1 ## DIST: This is the distribution Makefile for XEmacs. configure can
2 ## DIST: make most of the changes to this file you might want, so try
5 ## This file is part of XEmacs.
7 ## XEmacs is free software; you can redistribute it and/or modify it
8 ## under the terms of the GNU General Public License as published by the
9 ## Free Software Foundation; either version 2, or (at your option) any
12 ## XEmacs is distributed in the hope that it will be useful, but WITHOUT
13 ## ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
14 ## FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License
17 ## You should have received a copy of the GNU General Public License
18 ## along with XEmacs; see the file COPYING. If not, write to
19 ## the Free Software Foundation, Inc., 59 Temple Place - Suite 330,
20 ## Boston, MA 02111-1307, USA.
22 ## make all to compile and build XEmacs.
23 ## make install to build and install it.
24 ## make install-only to install after a previous complete build
25 ## make TAGS to update tags tables.
27 ## make clean or make mostlyclean
28 ## Delete all files from the current directory that are normally
29 ## created by building the program. Don't delete the files that
30 ## record the configuration. Also preserve files that could be made
31 ## by building, but normally aren't because the distribution comes
34 ## Delete `.dvi' files here if they are not part of the distribution.
37 ## Delete all files from the current directory that are created by
38 ## configuring or building the program. If you have unpacked the
39 ## source and built the program without creating any other files,
40 ## `make distclean' should leave only the files that were in the
44 ## Delete everything from the current directory that can be
45 ## reconstructed with this Makefile. This typically includes
46 ## everything deleted by distclean, plus more: C source files
47 ## produced by Bison, tags tables, info files, and so on.
50 ## Still more severe - delete backup and autosave files, too.
53 #include "src/config.h"
56 RECURSIVE_MAKE=$(MAKE)
59 RECURSIVE_MAKE=@RECURSIVE_MAKE@
66 MAKEPATH=./lib-src/make-path
70 ## ==================== Things `configure' Might Edit ====================
78 ## These help us choose version- and architecture-specific directories
79 ## to install files in.
81 ## This should be the number of the XEmacs version we're building,
82 ## like `19.12' or `19.13'.
85 ## This should be the name of the configuration we're building XEmacs
86 ## for, like `mips-dec-ultrix' or `sparc-sun-sunos'.
87 configuration=@configuration@
89 ## This will be the name of the generated binary and is set automatically
93 ## ==================== Where To Install Things ====================
95 ## The default location for installation. Everything is placed in
96 ## subdirectories of this directory. The default values for many of
97 ## the variables below are expressed in terms of this one, so you may
98 ## not need to change them. This defaults to /usr/local.
101 ## Variable data (as per each program update) goes here
102 ## The default is ${PROGNAME}
103 inststaticdir=@inststaticdir@
105 ## Static data (constant across program updates) goes here
106 ## The default is ${PROGNAME}-${version}
107 instvardir=@instvardir@
109 ## Like `prefix', but used for architecture-specific files.
110 exec_prefix=@exec_prefix@
112 ## Where to install XEmacs and other binaries that people will want to
113 ## run directly (like etags).
116 ## Where to install architecture-independent data files.
117 ## ${lispdir} and ${etcdir} are subdirectories of this.
120 ## Where to find XEmacs packages.
123 ## Where to install and expect the files that XEmacs modifies as it runs.
124 ## These files are all architecture-independent. Right now, the
125 ## only such data is the locking directory;
126 ## ${lockdir} is a subdirectory of this.
129 ## Where to install and expect executable files to be run by XEmacs
130 ## rather than directly by users, and other architecture-dependent data
131 ## ${archlibdir} is a subdirectory of this.
134 ## Where to install XEmacs's man pages, and what extension they should have.
138 ## Where to install and expect the info files describing XEmacs. In the
139 ## past, this defaulted to a subdirectory of ${prefix}/lib/xemacs, but
140 ## since there are now many packages documented with the texinfo
141 ## system, it is inappropriate to imply that it is part of XEmacs.
145 ## See callproc.c for code which references this.
148 ## Where to find the source code. The source code for XEmacs's C kernel is
149 ## expected to be in ${srcdir}/src, and the source code for XEmacs's
150 ## utility programs is expected to be in ${srcdir}/lib-src. This is
151 ## set by the configure script's `--srcdir' option.
154 ## Where the build is done.
157 ## ==================== XEmacs-specific directories ====================
159 ## These variables hold the values XEmacs will actually use. They are
160 ## based on the values of the standard Make variables above.
162 ## Where to install the lisp files distributed with
163 ## XEmacs. This includes the XEmacs version, so that the
164 ## lisp files for different versions of XEmacs will install
165 ## themselves in separate directories.
168 ## Where to install the module files distributed with
169 ## XEmacs. This includes the XEmacs version, so that the
170 ## module files for different versions of XEmacs will install
171 ## themselves in separate directories.
172 moduledir=@moduledir@
174 ## Directory XEmacs should search for lisp files specific
175 ## to this site (i.e. customizations), before consulting
177 sitelispdir=@sitelispdir@
179 ## Directory XEmacs should search for module files specific
180 ## to this site (i.e. customizations), before consulting
182 sitemoduledir=@sitemoduledir@
184 ## Where XEmacs will search for its lisp files while
185 ## building. This is only used during the process of
186 ## compiling XEmacs, to help XEmacs find its lisp files
187 ## before they've been installed in their final location.
188 ## It's usually identical to lispdir, except that the
189 ## entry for the directory containing the installed lisp
190 ## files has been replaced with ../lisp. This should be a
191 ## colon-separated list of directories.
192 buildlispdir=${srcdir}/lisp
194 ## Where to install the other architecture-independent
195 ## data files distributed with XEmacs (like the tutorial,
196 ## the cookie recipes and the Zippy database). This path
197 ## usually contains the XEmacs version number, so the data
198 ## files for multiple versions of XEmacs may be installed
202 ## Where to create and expect the locking directory, where
203 ## the XEmacs locking code keeps track of which files are
204 ## currently being edited.
207 ## Where to put the DOC file.
210 ## Where to put executables to be run by XEmacs rather than
211 ## the user. This path usually includes the XEmacs version
212 ## and configuration name, so that multiple configurations
213 ## for multiple versions of XEmacs may be installed at
215 archlibdir=@archlibdir@
217 ## ==================== Utility Programs for the Build ====================
219 ## Allow the user to specify the install program.
220 INSTALL = @install_pp@ @INSTALL@
221 INSTALL_PROGRAM = @INSTALL_PROGRAM@
222 INSTALL_DATA = @INSTALL_DATA@
224 ## ============================= Targets ==============================
226 ## Subdirectories to make recursively. `lisp' is not included
227 ## because the compiled lisp files are part of the distribution
228 ## and you cannot remake them without installing XEmacs first.
229 MAKE_SUBDIR = @MAKE_SUBDIR@
231 ## Subdirectories that can be made recursively.
232 SUBDIR = ${MAKE_SUBDIR} man
234 ## Subdirectories that must be cleaned on distclean
235 SUBDIR_DISTCLEAN = ${SUBDIR} modules/sample modules/ldap modules/zlib modules/base64
237 ## The makefiles of the directories in ${MAKE_SUBDIR}.
238 SUBDIR_MAKEFILES = @SUBDIR_MAKEFILES@
240 ## Subdirectories to `make install-arch-dep' recursively
241 INSTALL_ARCH_DEP_SUBDIR = @INSTALL_ARCH_DEP_SUBDIR@
243 ## Subdirectories to install, and where they'll go.
244 ## lib-src's makefile knows how to install it, so we don't do that here.
245 ## When installing the info files, we need to do special things to
246 ## avoid nuking an existing dir file, so we don't do that here;
247 ## instead, we have written out explicit code in the `install' targets.
248 COPYDIR = ${srcdir}/etc ${srcdir}/lisp
249 COPYDESTS = ${etcdir} ${lispdir}
250 GENERATED_HEADERS = src/paths.h src/Emacs.ad.h src/config.h lwlib/config.h src/sheap-adjust.h
251 GENERATED_LISP = lisp/finder-inf.el
253 all: ${PROGNAME} all-elc info
255 ${PROGNAME}: ${GENERATED_HEADERS} ${MAKE_SUBDIR} ${GENERATED_LISP}
257 ## For performance and consistency, no built-in rules
260 .NO_PARALLEL: ${GENERATED_HEADERS} ${MAKE_SUBDIR} dump-elcs
261 .PHONY: ${SUBDIR} all beta all-elc all-elcs dump-elc dump-elcs autoloads finder
263 ## Convenience target for XEmacs beta testers
264 beta: clean all-elc finder info
266 ## Convenience target for XEmacs maintainers
267 ## This would run `make-xemacsdist' if I were really confident that everything
271 ## Convenience target for XEmacs maintainers
272 ## Updates some rarely generated files:
273 ## - configure from configure.in
274 ## - config.values.in from configure
275 ## - src/depend from src/*.[ch]
276 .PHONY: config configure depend
277 config: configure depend
278 configure: ${srcdir}/configure ${srcdir}/lib-src/config.values.in
280 ${srcdir}/configure : ${srcdir}/configure.in
281 cd ${srcdir} && autoconf
283 ${srcdir}/lib-src/config.values.in : ${srcdir}/configure
284 cd ${srcdir} && $(SHELL) lib-src/config.values.sh
286 depend ${srcdir}/src/depend:
287 cd ./src && $(RECURSIVE_MAKE) depend
289 ## Build XEmacs and recompile out-of-date and missing .elc files along
291 all-elc all-elcs: lib-src lwlib dump-elcs src
292 ${blddir}/src/${PROGNAME} -batch -vanilla \
293 -l update-elc-2.el -f batch-update-elc-2 lisp
295 ## Sub-target for all-elc.
296 dump-elc dump-elcs: ${GENERATED_HEADERS} FRC.dump-elcs
297 cd ./src && $(RECURSIVE_MAKE) dump-elcs
299 autoloads: lisp/auto-autoloads.el lisp/custom-load.el
301 FRC.lisp.auto.autoloads.el:
302 lisp/auto-autoloads.el: FRC.lisp.auto.autoloads.el
303 $(RM) lisp/auto-autoloads.el
304 ${blddir}/src/${PROGNAME} -batch -vanilla \
305 -l autoload -f batch-update-directory lisp
306 ${blddir}/src/${PROGNAME} -batch -vanilla \
307 -f batch-byte-compile lisp/auto-autoloads.el
308 @$(RM) lisp/auto-autoloads.el~
310 $(RM) lisp/mule/auto-autoloads.el
311 ${blddir}/src/${PROGNAME} -batch -vanilla \
312 -l autoload -f batch-update-directory lisp/mule
313 ${blddir}/src/${PROGNAME} -batch -vanilla \
314 -f batch-byte-compile lisp/mule/auto-autoloads.el
315 @$(RM) lisp/mule/auto-autoloads.el~
318 FRC.lisp.custom.load.el:
319 lisp/custom-load.el: FRC.lisp.custom.load.el
320 ${blddir}/src/${PROGNAME} -batch -vanilla -l cus-dep \
321 -f Custom-make-dependencies lisp
324 @echo "Building finder database ..."
326 ${blddir}/src/${PROGNAME} -batch -vanilla \
327 -eval '(setq finder-compile-keywords-quiet t)' \
328 -l finder -f finder-compile-keywords )
329 @echo "Building finder database ...(done)"
332 @echo "Building finder database ..."
334 ${blddir}/src/${PROGNAME} -batch -vanilla \
335 -eval '(setq finder-compile-keywords-quiet t)' \
336 -l finder -f finder-compile-keywords )
337 @echo "Building finder database ...(done)"
339 ## We have to force the building of Emacs.ad.h as well in order to get it
340 ## updated correctly when VPATH is being used. Since we use move-if-change,
341 ## it will only actually change if the user modified ${etcdir}/Emacs.ad.
342 src/Emacs.ad.h: ${srcdir}/etc/Emacs.ad
343 @echo "Producing \`src/Emacs.ad.h' from \`etc/Emacs.ad'."
344 @$(RM) src/Emacs.ad.h
345 @(echo "/* Do not edit this file!" ; \
346 echo " Automatically generated from ${srcdir}/etc/Emacs.ad" ; \
348 $(SHELL) ${srcdir}/lib-src/ad2c ${srcdir}/etc/Emacs.ad ) > \
352 @echo "Resetting \`src/sheap-adjust.h'."; \
353 (echo "/* Do not edit this file!" ; \
354 echo " Automatically generated by XEmacs */" ; \
355 echo "#define SHEAP_ADJUSTMENT 0") > $@
357 src: @SRC_SUBDIR_DEPS@ FRC.src
358 pkg-src/tree-x: pkg-src/FRC.tree-x
361 dynodump: FRC.dynodump
362 FRC.src FRC.lib-src FRC.lwlib FRC.dynodump pkg-src/FRC.tree-x:
363 FRC.lisp.finder-inf.el:
365 ${SUBDIR}: ${SUBDIR_MAKEFILES} ${GENERATED_HEADERS} FRC
366 cd ./$@ && $(RECURSIVE_MAKE) all
368 Makefile: ${srcdir}/Makefile.in config.status
371 src/Makefile: ${srcdir}/src/Makefile.in.in ${srcdir}/src/depend config.status
374 lib-src/Makefile: ${srcdir}/lib-src/Makefile.in.in config.status
377 lwlib/Makefile: ${srcdir}/lwlib/Makefile.in.in config.status
380 pkg-src/tree-x/Makefile: ${srcdir}/pkg-src/tree-x/Makefile.in.in config.status
383 src/config.h: ${srcdir}/src/config.h.in
384 ./config.status && touch $@
386 src/paths.h: ${srcdir}/src/paths.h.in
387 ./config.status && touch $@
389 lwlib/config.h: ${srcdir}/lwlib/config.h.in
390 ./config.status && touch $@
392 ## ==================== Installation ====================
394 ## If we let lib-src do its own installation, that means we
395 ## don't have to duplicate the list of utilities to install in
396 ## this Makefile as well.
398 ## On AIX, use tar xBf.
399 ## On Xenix, use tar xpf.
401 .PHONY: install-only install install-arch-dep install-arch-indep gzip.el mkdir
402 .PHONY: check-features
404 ## We delete each directory in ${COPYDESTS} before we copy into it;
405 ## that way, we can reinstall over directories that have been put in
406 ## place with their files read-only (perhaps because they are checked
407 ## into RCS). In order to make this safe, we make sure that the
408 ## source exists and is distinct from the destination.
410 ## FSF doesn't depend on `all', but rather on ${MAKE_SUBDIR}, so that
411 ## they "won't ever modify src/paths.h". But that means you can't do
412 ## 'make install' right off the bat because src/paths.h won't exist.
413 ## And, in XEmacs case, src/Emacs.ad.h won't exist either. I also
414 ## don't see the point in avoiding modifying paths.h. It creates an
415 ## inconsistency in the build process. So we go ahead and depend on
419 ${blddir}/src/${PROGNAME} -batch -l check-features.el
421 install-only: ${MAKE_SUBDIR} check-features install-arch-dep install-arch-indep
423 install: all check-features install-arch-dep install-arch-indep
425 install-arch-dep: mkdir
426 for subdir in ${INSTALL_ARCH_DEP_SUBDIR}; do \
427 (cd ./$${subdir} && $(RECURSIVE_MAKE) install prefix=${prefix} \
428 exec_prefix=${exec_prefix} bindir=${bindir} libdir=${libdir} \
429 archlibdir=${archlibdir}) ; done
430 if test "`(cd ${archlibdir} && $(pwd))`" != \
431 "`(cd ./lib-src && $(pwd))`"; then \
432 if test -f ../Installation; then \
433 ${INSTALL_DATA} ../Installation ${archlibdir}/Installation; \
435 ${INSTALL_DATA} lib-src/config.values ${docdir}/config.values; \
436 ${INSTALL_DATA} lib-src/DOC ${docdir}/DOC; \
437 for subdir in `find ${archlibdir} -type d ! -name RCS ! -name SCCS ! -name CVS -print` ; \
438 do (cd $${subdir} && $(RM) -r RCS CVS SCCS \#* *~) ; done ; \
441 ${INSTALL_DATA} src/${PROGNAME}.dmp ${bindir}/${PROGNAME}-${version}-`src/${PROGNAME} -sd`.dmp
444 ${INSTALL_PROGRAM} src/${PROGNAME} ${bindir}/${PROGNAME}
445 -chmod 0755 ${bindir}/${PROGNAME}
447 ${INSTALL_PROGRAM} src/${PROGNAME} ${bindir}/${PROGNAME}-${version}
448 -chmod 0755 ${bindir}/${PROGNAME}-${version}
450 cd ${bindir} && $(RM) ./${PROGNAME} && ${LN_S} ${PROGNAME}-${version}.exe ./${PROGNAME}
452 cd ${bindir} && $(RM) ./${PROGNAME} && ${LN_S} ${PROGNAME}-${version} ./${PROGNAME}
454 #endif /* WIN32_NATIVE */
455 if test "${prefix}" != "${exec_prefix}"; then \
456 $(MAKEPATH) ${exec_prefix}/lib/${instvardir}; \
458 lib/${inststaticdir} \
459 lib/${instvardir}/etc \
460 lib/${instvardir}/info \
461 lib/${instvardir}/lisp; do \
462 if test ! -d ${exec_prefix}/$${dir}; then \
463 $(LN_S) ${prefix}/$${dir} ${exec_prefix}/$${dir}; fi; \
467 install-arch-indep: mkdir info
468 -@set ${COPYDESTS} ; \
469 for dir in ${COPYDIR} ; do \
470 if test "`(cd $$1 && $(pwd))`" != \
471 "`(cd $${dir} && $(pwd))`"; then \
472 : do nothing - echo "rm -rf $$1" ; \
476 -set ${COPYDESTS} ; \
477 for dir in ${COPYDESTS} ; do \
478 if test ! -d $${dir} ; then mkdir $${dir} ; fi ; \
480 for dir in ${COPYDIR} ; do \
483 -a "`(cd $${dir} && $(pwd))`" != \
484 "`(cd $${dest} && $(pwd))`" \
485 && (echo "Copying $${dir}..." ; \
486 (cd $${dir} && $(TAR) -cf - . ) | \
487 (cd $${dest} && umask 022 && $(TAR) -xf - );\
488 chmod 0755 $${dest}; \
489 for subdir in `find $${dest} -type d ! -name RCS ! -name SCCS ! -name CVS -print` ; do \
490 (cd $${subdir} && $(RM) -r RCS CVS SCCS \#* *~) ; \
493 if test "`(cd ${srcdir}/info && $(pwd))`" != \
494 "`(cd ${infodir} && $(pwd))`" && cd ${srcdir}/info; then \
495 if test ! -f ${infodir}/dir -a -f dir ; then \
496 ${INSTALL_DATA} ${srcdir}/info/dir ${infodir}/dir ; \
498 for file in *.info* ; do \
499 ${INSTALL_DATA} $${file} ${infodir}/$${file} ; \
500 chmod 0644 ${infodir}/$${file}; \
503 cd ${srcdir}/etc && \
504 for page in xemacs etags ctags gnuserv gnuclient gnuattach gnudoit; do \
505 ${INSTALL_DATA} ${srcdir}/etc/$${page}.1 ${mandir}/$${page}${manext} ; \
506 chmod 0644 ${mandir}/$${page}${manext} ; \
508 @echo "If you would like to save approximately 2M of disk space, do"
510 @echo "or you may run "
511 @echo ${srcdir}/lib-src/gzip-el.sh lispdir " from the command line."
512 @echo "Where lispdir is where the lisp files were installed, i.e.,"
516 $(SHELL) ${srcdir}/lib-src/gzip-el.sh ${lispdir}
518 ## Build all the directories to install XEmacs in.
519 ## Since we may be creating several layers of directories,
520 ## (e.g. /usr/local/lib/${PROGNAME}-20.5/sparc-sun-solaris2.6), we use
521 ## make-path instead of mkdir. Not all mkdirs have the `-p' flag.
523 ${MAKEPATH} ${COPYDESTS} ${lockdir} ${docdir} ${infodir} ${archlibdir} \
524 ${mandir} ${bindir} ${datadir} ${libdir} ${pkgdir} \
525 ${sitelispdir} ${moduledir} ${sitemoduledir}
526 -chmod 0777 ${lockdir}
528 ## Delete all the installed files that the `install' target would
529 ## create (but not the noninstalled files such as `make all' would
532 #### Don't delete the lisp and etc directories if they're in the source tree.
533 #### This target has not been updated in sometime and until it is it
534 #### would be extremely dangerous for anyone to use it.
537 ## $(RECURSIVE_MAKE) uninstall \
538 ## prefix=${prefix} exec_prefix=${exec_prefix} \
539 ## bindir=${bindir} libdir=${libdir} archlibdir=${archlibdir})
540 ## for dir in ${lispdir} ${etcdir} ; do \
541 ## case `(cd $${dir} ; $(pwd))` in \
542 ## `(cd ${srcdir} ; $(pwd))`* ) ;; \
543 ## * ) $(RM) $${dir} ;; \
546 ## ${datadir}/${PROGNAME}/${version}/* ) \
547 ## $(RM) -r ${datadir}/${PROGNAME}/${version} \
551 ## cd ${infodir} && $(RM) cl* ${PROGNAME}* forms* info* vip*
552 ## cd ${mandir} && $(RM) xemacs.1 etags.1 ctags.1 gnuserv.1
553 ## cd ${bindir} && $(RM) ${PROGNAME}-${version} ${PROGNAME}
556 ## Some makes seem to remember that they've built something called FRC,
557 ## so you can only use a given FRC once per makefile.
558 FRC FRC.src.paths.h FRC.mkdir FRC.dump-elcs FRC.info:
559 FRC.mostlyclean FRC.clean FRC.distclean FRC.realclean FRC.tags:
561 ## ==================== Cleaning up and miscellanea ====================
563 .PHONY: mostlyclean clean distclean realclean extraclean
566 ## Like `clean', but may refrain from deleting a few files that people
567 ## normally don't want to recompile. For example, the `mostlyclean'
568 ## target for GCC does not delete `libgcc.a', because recompiling it
569 ## is rarely necessary and takes a lot of time.
570 mostlyclean: FRC.mostlyclean
571 for d in $(SUBDIR); do (cd ./$$d && $(RECURSIVE_MAKE) $@); done
574 ## Delete all files from the current directory that are normally
575 ## created by building the program. Don't delete the files that
576 ## record the configuration. Also preserve files that could be made
577 ## by building, but normally aren't because the distribution comes
580 ## Delete `.dvi' files here if they are not part of the distribution.
582 for d in $(SUBDIR); do (cd ./$$d && $(RECURSIVE_MAKE) $@); done
586 ## Delete all files from the current directory that are created by
587 ## configuring or building the program. If you have unpacked the
588 ## source and built the program without creating any other files,
589 ## `make distclean' should leave only the files that were in the
592 $(RM) config.status config.log confdefs.h config-tmp-* build-install Installation ; \
593 $(RM) core .sbinit lock/* GNUmakefile Makefile Makefile.in ; \
594 $(RM) lisp/finder-inf.el* Installation.el Installation.elc ; \
595 $(RM) -r site-packages xemacs-packages mule-packages site-lisp
597 distclean: FRC.distclean
598 for d in $(SUBDIR_DISTCLEAN); do (cd ./$$d && $(RECURSIVE_MAKE) $@); done
602 ## Delete everything from the current directory that can be
603 ## reconstructed with this Makefile. This typically includes
604 ## everything deleted by distclean, plus more: C source files
605 ## produced by Bison, tags tables, info files, and so on.
607 ## One exception, however: `make realclean' should not delete
608 ## `configure' even if `configure' can be remade using a rule in the
609 ## Makefile. More generally, `make realclean' should not delete
610 ## anything that needs to exist in order to run `configure' and then
611 ## begin to build the program.
612 realclean: FRC.realclean
613 for d in $(SUBDIR); do (cd ./$$d && $(RECURSIVE_MAKE) $@); done
617 ## This doesn't actually appear in the coding standards, but Karl
618 ## says GCC supports it, and that's where the configuration part of
619 ## the coding standards seem to come from. It's like distclean, but
620 ## it deletes backup and autosave files too.
622 for d in $(SUBDIR); do (cd ./$$d && $(RECURSIVE_MAKE) $@); done
626 ## Unlocking and relocking. The idea of these productions is to reduce
627 ## hassles when installing an incremental tar of XEmacs. Do `make unlock'
628 ## before unlocking the file to take the write locks off all sources so
629 ## that tar xvof will overwrite them without fuss. Then do `make relock'
630 ## afterward so that VC mode will know which files should be checked in
631 ## if you want to mung them.
633 ## Note: it's no disaster if these productions miss a file or two; tar
634 ## and VC will swiftly let you know if this happens, and it is easily
636 SOURCES = ChangeLog GETTING.GNU.SOFTWARE INSTALL Makefile.in PROBLEMS \
637 README build-install.in configure make-dist move-if-change
639 .PHONY: unlock relock TAGS tags check dist info dvi mcs
642 chmod u+w $(SOURCES) cpp/*
643 -cd ./elisp && chmod u+w Makefile README *.texi
644 for d in src etc lib-src lisp; do (cd ./$$d && $(RECURSIVE_MAKE) $@); done
645 cd ./lisp/term && chmod u+w README *.el
646 cd ./man && chmod u+w *texi* ChangeLog split-man
647 cd ./lwlib && chmod u+w *.[ch] Makefile.in.in
650 chmod u-w $(SOURCES) cpp/*
651 -cd ./elisp && chmod u-w Makefile README *.texi
652 for d in src etc lib-src lisp; do (cd ./$$d && $(RECURSIVE_MAKE) $@); done
653 cd ./lisp/term && chmod u+w README *.el
654 cd ./man && chmod u+w *texi* ChangeLog split-man
655 cd ./lwlib && chmod u+w *.[ch] Makefile.in.in
657 PRUNE_VC = -name SCCS -prune -o -name RCS -prune -o -name CVS -prune -o
660 @echo "If you don't have a copy of etags around, then do 'make lib-src' first."
662 @PATH=`$(pwd)`/lib-src:$$PATH HOME=/-=-; export PATH HOME; \
663 echo "Using etags from `which etags`."
664 PATH=`$(pwd)`/lib-src:$$PATH ; export PATH; cd ${srcdir} && \
665 find src lwlib lib-src ${PRUNE_VC} -name '*.[ch]' -print | \
666 xargs etags -a -r '/[ ]*DEF\(VAR\|INE\)_[A-Z_]+[ ]*([ ]*"\([^"]+\)"/\2/'; \
667 find ${tagslisp} ${PRUNE_VC} -name '*.el' ! -name 'auto-autoloads.el' -print | \
668 xargs etags -a -l none -r "/^(def\\(var\\|un\\|alias\\|const\\|macro\\|subst\\|struct\\|face\\|group\\|custom\\|ine-\\(function\\|compiler-macro\\|[a-z-]+alias\\)\\)[ ]+'?\\([^ ]+\\)/\\3/"
671 cd ./src && $(RECURSIVE_MAKE) $@
674 cd ${srcdir}/man && $(RECURSIVE_MAKE) $@
677 cd ${srcdir}/man && $(RECURSIVE_MAKE) $@
679 ## Fix up version information in executables (Solaris-only)
681 date=`LANG=C LC_ALL=C date -u '+%e %b %Y'`; \
682 ident="@(#)RELEASE VERSION XEmacs ${version} $${date}"; \
683 for f in `file lib-src/* src/${PROGNAME} | grep ELF | sed -e 's/:.*//'`; do \
684 mcs -da "$${ident} `echo $${f} | sed 's/.*\///'`" $${f}; \