1 ## DIST: This is the distribution Makefile for XEmacs. configure can
2 ## DIST: make most of the changes to this file you might want, so try
5 ## This file is part of XEmacs.
7 ## XEmacs is free software; you can redistribute it and/or modify it
8 ## under the terms of the GNU General Public License as published by the
9 ## Free Software Foundation; either version 2, or (at your option) any
12 ## XEmacs is distributed in the hope that it will be useful, but WITHOUT
13 ## ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
14 ## FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License
17 ## You should have received a copy of the GNU General Public License
18 ## along with XEmacs; see the file COPYING. If not, write to
19 ## the Free Software Foundation, Inc., 59 Temple Place - Suite 330,
20 ## Boston, MA 02111-1307, USA.
22 ## make all to compile and build XEmacs.
23 ## make install to build and install it.
24 ## make install-only to install after a previous complete build
25 ## make TAGS to update tags tables.
27 ## make clean or make mostlyclean
28 ## Delete all files from the current directory that are normally
29 ## created by building the program. Don't delete the files that
30 ## record the configuration. Also preserve files that could be made
31 ## by building, but normally aren't because the distribution comes
34 ## Delete `.dvi' files here if they are not part of the distribution.
37 ## Delete all files from the current directory that are created by
38 ## configuring or building the program. If you have unpacked the
39 ## source and built the program without creating any other files,
40 ## `make distclean' should leave only the files that were in the
44 ## Delete everything from the current directory that can be
45 ## reconstructed with this Makefile. This typically includes
46 ## everything deleted by distclean, plus more: C source files
47 ## produced by Bison, tags tables, info files, and so on.
50 ## Still more severe - delete backup and autosave files, too.
53 RECURSIVE_MAKE=$(MAKE)
56 RECURSIVE_MAKE=@RECURSIVE_MAKE@
65 ## ==================== Things `configure' Might Edit ====================
73 ## These help us choose version- and architecture-specific directories
74 ## to install files in.
76 ## This should be the number of the XEmacs version we're building,
77 ## like `19.12' or `19.13'.
80 ## This should be the name of the configuration we're building XEmacs
81 ## for, like `mips-dec-ultrix' or `sparc-sun-sunos'.
82 configuration=@configuration@
84 ## This will be the name of the generated binary and is set automatically
88 ## ==================== Where To Install Things ====================
90 ## The default location for installation. Everything is placed in
91 ## subdirectories of this directory. The default values for many of
92 ## the variables below are expressed in terms of this one, so you may
93 ## not need to change them. This defaults to /usr/local.
96 ## Like `prefix', but used for architecture-specific files.
97 exec_prefix=@exec_prefix@
99 ## Where to install XEmacs and other binaries that people will want to
100 ## run directly (like etags).
103 ## Where to install architecture-independent data files.
104 ## ${lispdir} and ${etcdir} are subdirectories of this.
107 ## Where to find XEmacs packages.
110 ## Where to install and expect the files that XEmacs modifies as it runs.
111 ## These files are all architecture-independent. Right now, the
112 ## only such data is the locking directory;
113 ## ${lockdir} is a subdirectory of this.
116 ## Where to install and expect executable files to be run by XEmacs
117 ## rather than directly by users, and other architecture-dependent data
118 ## ${archlibdir} is a subdirectory of this.
121 ## Where to install XEmacs's man pages, and what extension they should have.
125 ## Where to install and expect the info files describing XEmacs. In the
126 ## past, this defaulted to a subdirectory of ${prefix}/lib/xemacs, but
127 ## since there are now many packages documented with the texinfo
128 ## system, it is inappropriate to imply that it is part of XEmacs.
132 ## See callproc.c for code which references this.
135 ## Where to find the source code. The source code for XEmacs's C kernel is
136 ## expected to be in ${srcdir}/src, and the source code for XEmacs's
137 ## utility programs is expected to be in ${srcdir}/lib-src. This is
138 ## set by the configure script's `--srcdir' option.
141 ## Where the build is done.
144 ## ==================== XEmacs-specific directories ====================
146 ## These variables hold the values XEmacs will actually use. They are
147 ## based on the values of the standard Make variables above.
149 ## Where to install the lisp files distributed with
150 ## XEmacs. This includes the XEmacs version, so that the
151 ## lisp files for different versions of XEmacs will install
152 ## themselves in separate directories.
155 ## Where to install the module files distributed with
156 ## XEmacs. This includes the XEmacs version, so that the
157 ## module files for different versions of XEmacs will install
158 ## themselves in separate directories.
159 moduledir=@moduledir@
161 ## Directory XEmacs should search for lisp files specific
162 ## to this site (i.e. customizations), before consulting
164 sitelispdir=@sitelispdir@
166 ## Directory XEmacs should search for module files specific
167 ## to this site (i.e. customizations), before consulting
169 sitemoduledir=@sitemoduledir@
171 ## Where XEmacs will search for its lisp files while
172 ## building. This is only used during the process of
173 ## compiling XEmacs, to help XEmacs find its lisp files
174 ## before they've been installed in their final location.
175 ## It's usually identical to lispdir, except that the
176 ## entry for the directory containing the installed lisp
177 ## files has been replaced with ../lisp. This should be a
178 ## colon-separated list of directories.
179 buildlispdir=${srcdir}/lisp
181 ## Where to install the other architecture-independent
182 ## data files distributed with XEmacs (like the tutorial,
183 ## the cookie recipes and the Zippy database). This path
184 ## usually contains the XEmacs version number, so the data
185 ## files for multiple versions of XEmacs may be installed
189 ## Where to create and expect the locking directory, where
190 ## the XEmacs locking code keeps track of which files are
191 ## currently being edited.
194 ## Where to put executables to be run by XEmacs rather than
195 ## the user. This path usually includes the XEmacs version
196 ## and configuration name, so that multiple configurations
197 ## for multiple versions of XEmacs may be installed at
199 archlibdir=@archlibdir@
201 ## ==================== Utility Programs for the Build ====================
203 ## Allow the user to specify the install program.
204 INSTALL = @install_pp@ @INSTALL@
205 INSTALL_PROGRAM = @INSTALL_PROGRAM@
206 INSTALL_DATA = @INSTALL_DATA@
208 ## ============================= Targets ==============================
210 ## Subdirectories to make recursively. `lisp' is not included
211 ## because the compiled lisp files are part of the distribution
212 ## and you cannot remake them without installing XEmacs first.
213 MAKE_SUBDIR = @MAKE_SUBDIR@
215 ## Subdirectories that can be made recursively.
216 SUBDIR = ${MAKE_SUBDIR} man
218 ## The makefiles of the directories in ${MAKE_SUBDIR}.
219 SUBDIR_MAKEFILES = @SUBDIR_MAKEFILES@
221 ## Subdirectories to `make install-arch-dep' recursively
222 INSTALL_ARCH_DEP_SUBDIR = @INSTALL_ARCH_DEP_SUBDIR@
224 ## Subdirectories to install, and where they'll go.
225 ## lib-src's makefile knows how to install it, so we don't do that here.
226 ## When installing the info files, we need to do special things to
227 ## avoid nuking an existing dir file, so we don't do that here;
228 ## instead, we have written out explicit code in the `install' targets.
229 COPYDIR = ${srcdir}/etc ${srcdir}/lisp
230 COPYDESTS = ${etcdir} ${lispdir}
231 GENERATED_HEADERS = src/paths.h src/Emacs.ad.h src/puresize-adjust.h src/config.h lwlib/config.h src/sheap-adjust.h
232 GENERATED_LISP = lisp/finder-inf.el
234 all: ${PROGNAME} all-elc info
236 ${PROGNAME}: ${GENERATED_HEADERS} ${MAKE_SUBDIR} ${GENERATED_LISP}
238 ## For performance and consistency, no built-in rules
241 .NO_PARALLEL: ${GENERATED_HEADERS} ${MAKE_SUBDIR} dump-elcs
242 .PHONY: ${SUBDIR} all beta all-elc all-elcs dump-elc dump-elcs autoloads finder
244 ## Convenience target for XEmacs beta testers
245 beta: clean all-elc finder
247 ## Convenience target for XEmacs maintainers
248 ## This would run `make-xemacsdist' if I were really confident that everything
252 ## Convenience target for XEmacs maintainers
253 ## Updates some rarely generated files:
254 ## - configure from configure.in
255 ## - config.values.in from configure
256 ## - src/depend from src/*.[ch]
257 .PHONY: config configure depend
258 config: configure depend
259 configure: ${srcdir}/configure
260 ${srcdir}/configure: ${srcdir}/configure.in
261 cd ${srcdir} && autoconf
262 cd ${srcdir} && /bin/sh lib-src/config.values.sh
264 depend ${srcdir}/src/depend:
265 cd ${srcdir}/src && \
266 perl ./make-src-depend > depend.tmp && \
267 $(RM) depend && mv depend.tmp depend
269 ## Build XEmacs and recompile out-of-date and missing .elc files along
271 all-elc all-elcs: lib-src lwlib dump-elcs src
272 MAKE='$(MAKE)' EMACS='./src/$(PROGNAME)' sh ${srcdir}/lib-src/update-elc.sh
274 ## Sub-target for all-elc.
275 dump-elc dump-elcs: ${GENERATED_HEADERS} FRC.dump-elcs
276 cd ./src && $(RECURSIVE_MAKE) dump-elcs
279 MAKE='$(MAKE)' EMACS='./src/$(PROGNAME)' sh ${srcdir}/lib-src/update-autoloads.sh
282 MAKE='$(MAKE)' EMACS='./src/$(PROGNAME)' sh ${srcdir}/lib-src/update-custom.sh
285 @echo "Building finder database ..."
287 ${blddir}/src/${PROGNAME} -batch -vanilla \
288 -eval '(setq finder-compile-keywords-quiet t)' \
289 -l finder -f finder-compile-keywords )
290 @echo "Building finder database ...(done)"
293 @echo "Building finder database ..."
295 ${blddir}/src/${PROGNAME} -batch -vanilla \
296 -eval '(setq finder-compile-keywords-quiet t)' \
297 -l finder -f finder-compile-keywords )
298 @echo "Building finder database ...(done)"
300 ## We have to force the building of Emacs.ad.h as well in order to get it
301 ## updated correctly when VPATH is being used. Since we use move-if-change,
302 ## it will only actually change if the user modified ${etcdir}/Emacs.ad.
303 src/Emacs.ad.h: ${srcdir}/etc/Emacs.ad
304 @echo "Producing \`src/Emacs.ad.h' from \`etc/Emacs.ad'."
305 @$(RM) src/Emacs.ad.h
306 @(echo "/* Do not edit this file!" ; \
307 echo " Automatically generated from ${srcdir}/etc/Emacs.ad" ; \
309 /bin/sh ${srcdir}/lib-src/ad2c ${srcdir}/etc/Emacs.ad ) > \
312 src/puresize-adjust.h: ${srcdir}/src/puresize.h
313 @echo "Resetting \`src/puresize-adjust.h'."; \
314 (echo "/* Do not edit this file!" ; \
315 echo " Automatically generated by XEmacs */" ; \
316 echo "#define PURESIZE_ADJUSTMENT 0") > $@
319 @echo "Resetting \`src/sheap-adjust.h'."; \
320 (echo "/* Do not edit this file!" ; \
321 echo " Automatically generated by XEmacs */" ; \
322 echo "#define SHEAP_ADJUSTMENT 0") > $@
324 src: @SRC_SUBDIR_DEPS@ FRC.src
325 pkg-src/tree-x: pkg-src/FRC.tree-x
328 dynodump: FRC.dynodump
329 FRC.src FRC.lib-src FRC.lwlib FRC.dynodump pkg-src/FRC.tree-x:
330 FRC.lisp.finder-inf.el:
332 ${SUBDIR}: ${SUBDIR_MAKEFILES} ${GENERATED_HEADERS} FRC
333 cd ./$@ && $(RECURSIVE_MAKE) all
335 Makefile: ${srcdir}/Makefile.in config.status
338 src/Makefile: ${srcdir}/src/Makefile.in.in ${srcdir}/src/depend config.status
341 lib-src/Makefile: ${srcdir}/lib-src/Makefile.in.in config.status
344 lwlib/Makefile: ${srcdir}/lwlib/Makefile.in.in config.status
347 pkg-src/tree-x/Makefile: ${srcdir}/pkg-src/tree-x/Makefile.in.in config.status
350 src/config.h: ${srcdir}/src/config.h.in
351 ./config.status && touch $@
353 src/paths.h: ${srcdir}/src/paths.h.in
354 ./config.status && touch $@
356 lwlib/config.h: ${srcdir}/lwlib/config.h.in
357 ./config.status && touch $@
359 ## ==================== Installation ====================
361 ## If we let lib-src do its own installation, that means we
362 ## don't have to duplicate the list of utilities to install in
363 ## this Makefile as well.
365 ## On AIX, use tar xBf.
366 ## On Xenix, use tar xpf.
368 .PHONY: install-only install install-arch-dep install-arch-indep gzip.el mkdir
369 .PHONY: check-features
371 ## We delete each directory in ${COPYDESTS} before we copy into it;
372 ## that way, we can reinstall over directories that have been put in
373 ## place with their files read-only (perhaps because they are checked
374 ## into RCS). In order to make this safe, we make sure that the
375 ## source exists and is distinct from the destination.
377 ## FSF doesn't depend on `all', but rather on ${MAKE_SUBDIR}, so that
378 ## they "won't ever modify src/paths.h". But that means you can't do
379 ## 'make install' right off the bat because src/paths.h won't exist.
380 ## And, in XEmacs case, src/Emacs.ad.h won't exist either. I also
381 ## don't see the point in avoiding modifying paths.h. It creates an
382 ## inconsistency in the build process. So we go ahead and depend on
386 ${blddir}/src/${PROGNAME} -batch -l check-features.el
388 install-only: ${MAKE_SUBDIR} check-features install-arch-dep install-arch-indep
390 install: all check-features install-arch-dep install-arch-indep
392 install-arch-dep: mkdir
393 for subdir in ${INSTALL_ARCH_DEP_SUBDIR}; do \
394 (cd ./$${subdir} && $(RECURSIVE_MAKE) install prefix=${prefix} \
395 exec_prefix=${exec_prefix} bindir=${bindir} libdir=${libdir} \
396 archlibdir=${archlibdir}) ; done
397 if test "`(cd ${archlibdir} && $(pwd))`" != \
398 "`(cd ./lib-src && $(pwd))`"; then \
399 if test -f ../Installation; then \
400 ${INSTALL_DATA} ../Installation ${archlibdir}/Installation; \
402 for f in DOC config.values; do \
403 ${INSTALL_DATA} lib-src/$${f} ${archlibdir}/$${f}; \
405 for subdir in `find ${archlibdir} -type d ! -name RCS ! -name SCCS ! -name CVS -print` ; \
406 do (cd $${subdir} && $(RM) -r RCS CVS SCCS \#* *~) ; done ; \
408 ${INSTALL_PROGRAM} src/${PROGNAME} ${bindir}/${PROGNAME}-${version}
409 -chmod 0755 ${bindir}/${PROGNAME}-${version}
410 cd ${bindir} && $(RM) ./${PROGNAME} && ${LN_S} ${PROGNAME}-${version} ./${PROGNAME}
411 if test "${prefix}" != "${exec_prefix}"; then \
414 lib/${PROGNAME}-${version}/etc \
415 lib/${PROGNAME}-${version}/info \
416 lib/${PROGNAME}-${version}/lisp; do \
417 if test ! -d ${exec_prefix}/$${dir}; then \
418 $(LN_S) ${prefix}/$${dir} ${exec_prefix}/$${dir}; fi; \
422 install-arch-indep: mkdir info
423 -@set ${COPYDESTS} ; \
424 for dir in ${COPYDIR} ; do \
425 if test "`(cd $$1 && $(pwd))`" != \
426 "`(cd $${dir} && $(pwd))`"; then \
427 : do nothing - echo "rm -rf $$1" ; \
431 -set ${COPYDESTS} ; \
432 for dir in ${COPYDESTS} ; do \
433 if test ! -d $${dir} ; then mkdir $${dir} ; fi ; \
435 for dir in ${COPYDIR} ; do \
438 -a "`(cd $${dir} && $(pwd))`" != \
439 "`(cd $${dest} && $(pwd))`" \
440 && (echo "Copying $${dir}..." ; \
441 (cd $${dir} && tar -cf - . ) | \
442 (cd $${dest} && umask 022 && tar -xf - );\
443 chmod 0755 $${dest}; \
444 for subdir in `find $${dest} -type d ! -name RCS ! -name SCCS ! -name CVS -print` ; do \
445 (cd $${subdir} && $(RM) -r RCS CVS SCCS \#* *~) ; \
448 if test "`(cd ${srcdir}/info && $(pwd))`" != \
449 "`(cd ${infodir} && $(pwd))`" && cd ${srcdir}/info; then \
450 if test ! -f ${infodir}/dir -a -f dir ; then \
451 ${INSTALL_DATA} ${srcdir}/info/dir ${infodir}/dir ; \
453 for file in *.info* ; do \
454 ${INSTALL_DATA} $${file} ${infodir}/$${file} ; \
455 chmod 0644 ${infodir}/$${file}; \
458 ## Note it's `xemacs' not ${PROGNAME}
459 cd ${srcdir}/etc && \
460 for page in xemacs etags ctags gnuserv gnuclient gnuattach gnudoit; do \
461 ${INSTALL_DATA} ${srcdir}/etc/$${page}.1 ${mandir}/$${page}${manext} ; \
462 chmod 0644 ${mandir}/$${page}${manext} ; \
464 @echo "If you would like to save approximately 2M of disk space, do"
466 @echo "or you may run "
467 @echo ${srcdir}/lib-src/gzip-el.sh lispdir " from the command line."
468 @echo "Where lispdir is where the lisp files were installed, i.e.,"
472 ${srcdir}/lib-src/gzip-el.sh ${lispdir}
474 MAKEPATH=./lib-src/make-path
475 ## Build all the directories to install XEmacs in.
476 ## Since we may be creating several layers of directories,
477 ## (e.g. /usr/local/lib/${PROGNAME}-20.5/sparc-sun-solaris2.6), we use
478 ## make-path instead of mkdir. Not all mkdirs have the `-p' flag.
480 ${MAKEPATH} ${COPYDESTS} ${lockdir} ${infodir} ${archlibdir} \
481 ${mandir} ${bindir} ${datadir} ${libdir} ${pkgdir} \
482 ${sitelispdir} ${moduledir} ${sitemoduledir}
483 -chmod 0777 ${lockdir}
485 ## Delete all the installed files that the `install' target would
486 ## create (but not the noninstalled files such as `make all' would
489 #### Don't delete the lisp and etc directories if they're in the source tree.
490 #### This target has not been updated in sometime and until it is it
491 #### would be extremely dangerous for anyone to use it.
494 ## $(RECURSIVE_MAKE) uninstall \
495 ## prefix=${prefix} exec_prefix=${exec_prefix} \
496 ## bindir=${bindir} libdir=${libdir} archlibdir=${archlibdir})
497 ## for dir in ${lispdir} ${etcdir} ; do \
498 ## case `(cd $${dir} ; $(pwd))` in \
499 ## `(cd ${srcdir} ; $(pwd))`* ) ;; \
500 ## * ) $(RM) $${dir} ;; \
503 ## ${datadir}/${PROGNAME}/${version}/* ) \
504 ## $(RM) -r ${datadir}/${PROGNAME}/${version} \
508 ## cd ${infodir} && $(RM) cl* ${PROGNAME}* forms* info* vip*
509 ## cd ${mandir} && $(RM) xemacs.1 etags.1 ctags.1 gnuserv.1
510 ## cd ${bindir} && $(RM) ${PROGNAME}-${version} ${PROGNAME}
513 ## Some makes seem to remember that they've built something called FRC,
514 ## so you can only use a given FRC once per makefile.
515 FRC FRC.src.paths.h FRC.mkdir FRC.dump-elcs FRC.info:
516 FRC.mostlyclean FRC.clean FRC.distclean FRC.realclean FRC.tags:
518 ## ==================== Cleaning up and miscellanea ====================
520 .PHONY: mostlyclean clean distclean realclean extraclean
523 ## Like `clean', but may refrain from deleting a few files that people
524 ## normally don't want to recompile. For example, the `mostlyclean'
525 ## target for GCC does not delete `libgcc.a', because recompiling it
526 ## is rarely necessary and takes a lot of time.
527 mostlyclean: FRC.mostlyclean
528 for d in $(SUBDIR); do (cd ./$$d && $(RECURSIVE_MAKE) $@); done
531 ## Delete all files from the current directory that are normally
532 ## created by building the program. Don't delete the files that
533 ## record the configuration. Also preserve files that could be made
534 ## by building, but normally aren't because the distribution comes
537 ## Delete `.dvi' files here if they are not part of the distribution.
539 for d in $(SUBDIR); do (cd ./$$d && $(RECURSIVE_MAKE) $@); done
543 ## Delete all files from the current directory that are created by
544 ## configuring or building the program. If you have unpacked the
545 ## source and built the program without creating any other files,
546 ## `make distclean' should leave only the files that were in the
549 $(RM) config.status config.log confdefs.h config-tmp-* build-install Installation ; \
550 $(RM) core .sbinit lock/* GNUmakefile Makefile Makefile.in ; \
551 $(RM) lisp/finder-inf.el* Installation.el Installation.elc ; \
552 $(RM) packages mule-packages site-lisp
554 distclean: FRC.distclean
555 for d in $(SUBDIR); do (cd ./$$d && $(RECURSIVE_MAKE) $@); done
559 ## Delete everything from the current directory that can be
560 ## reconstructed with this Makefile. This typically includes
561 ## everything deleted by distclean, plus more: C source files
562 ## produced by Bison, tags tables, info files, and so on.
564 ## One exception, however: `make realclean' should not delete
565 ## `configure' even if `configure' can be remade using a rule in the
566 ## Makefile. More generally, `make realclean' should not delete
567 ## anything that needs to exist in order to run `configure' and then
568 ## begin to build the program.
569 realclean: FRC.realclean
570 for d in $(SUBDIR); do (cd ./$$d && $(RECURSIVE_MAKE) $@); done
574 ## This doesn't actually appear in the coding standards, but Karl
575 ## says GCC supports it, and that's where the configuration part of
576 ## the coding standards seem to come from. It's like distclean, but
577 ## it deletes backup and autosave files too.
579 for d in $(SUBDIR); do (cd ./$$d && $(RECURSIVE_MAKE) $@); done
583 ## Unlocking and relocking. The idea of these productions is to reduce
584 ## hassles when installing an incremental tar of XEmacs. Do `make unlock'
585 ## before unlocking the file to take the write locks off all sources so
586 ## that tar xvof will overwrite them without fuss. Then do `make relock'
587 ## afterward so that VC mode will know which files should be checked in
588 ## if you want to mung them.
590 ## Note: it's no disaster if these productions miss a file or two; tar
591 ## and VC will swiftly let you know if this happens, and it is easily
593 SOURCES = ChangeLog GETTING.GNU.SOFTWARE INSTALL Makefile.in PROBLEMS \
594 README build-install.in configure make-dist move-if-change
596 .PHONY: unlock relock TAGS tags check dist info dvi mcs
599 chmod u+w $(SOURCES) cpp/*
600 -cd ./elisp && chmod u+w Makefile README *.texi
601 for d in src etc lib-src lisp; do (cd ./$$d && $(RECURSIVE_MAKE) $@); done
602 cd ./lisp/term && chmod u+w README *.el
603 cd ./man && chmod u+w *texi* ChangeLog split-man
604 cd ./lwlib && chmod u+w *.[ch] Makefile.in.in
607 chmod u-w $(SOURCES) cpp/*
608 -cd ./elisp && chmod u-w Makefile README *.texi
609 for d in src etc lib-src lisp; do (cd ./$$d && $(RECURSIVE_MAKE) $@); done
610 cd ./lisp/term && chmod u+w README *.el
611 cd ./man && chmod u+w *texi* ChangeLog split-man
612 cd ./lwlib && chmod u+w *.[ch] Makefile.in.in
614 PRUNE_VC = -name SCCS -prune -o -name RCS -prune -o -name CVS -prune -o
617 @echo "If you don't have a copy of etags around, then do 'make lib-src' first."
619 @PATH=`$(pwd)`/lib-src:$$PATH HOME=/-=-; export PATH HOME; \
620 echo "Using etags from `which etags`."
621 PATH=`$(pwd)`/lib-src:$$PATH ; export PATH; cd ${srcdir} && \
622 find src lwlib lib-src ${PRUNE_VC} -name '*.[ch]' -print | \
623 xargs etags -a -r '/[ ]*DEF\(VAR\|INE\)_[A-Z_]+[ ]*([ ]*"\([^"]+\)"/\2/'; \
624 find ${tagslisp} ${PRUNE_VC} -name '*.el' ! -name 'auto-autoloads.el' -print | \
625 xargs etags -a -l none -r "/^(def\\(var\\|un\\|alias\\|const\\|macro\\|subst\\|struct\\|face\\|group\\|custom\\|ine-\\(function\\|compiler-macro\\|[a-z-]+alias\\)\\)[ ]+'?\\([^ ]+\\)/\\3/"
628 cd ./src && $(RECURSIVE_MAKE) $@
631 cd ${srcdir}/man && $(RECURSIVE_MAKE) $@
634 cd ${srcdir}/man && $(RECURSIVE_MAKE) $@
636 ## Fix up version information in executables (Solaris-only)
638 date=`LANG=C LC_ALL=C date -u '+%e %b %Y'`; \
639 ident="@(#)RELEASE VERSION XEmacs ${version} $${date}"; \
640 for f in `file lib-src/* src/${PROGNAME} | grep ELF | sed -e 's/:.*//'`; do \
641 mcs -da "$${ident} `echo $${f} | sed 's/.*\///'`" $${f}; \