1 ## DIST: This is the distribution Makefile for XEmacs. configure can
2 ## DIST: make most of the changes to this file you might want, so try
5 ## This file is part of XEmacs.
7 ## XEmacs is free software; you can redistribute it and/or modify it
8 ## under the terms of the GNU General Public License as published by the
9 ## Free Software Foundation; either version 2, or (at your option) any
12 ## XEmacs is distributed in the hope that it will be useful, but WITHOUT
13 ## ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
14 ## FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License
17 ## You should have received a copy of the GNU General Public License
18 ## along with XEmacs; see the file COPYING. If not, write to
19 ## the Free Software Foundation, Inc., 59 Temple Place - Suite 330,
20 ## Boston, MA 02111-1307, USA.
22 ## make all to compile and build XEmacs.
23 ## make install to build and install it.
24 ## make install-only to install after a previous complete build
25 ## make TAGS to update tags tables.
27 ## make clean or make mostlyclean
28 ## Delete all files from the current directory that are normally
29 ## created by building the program. Don't delete the files that
30 ## record the configuration. Also preserve files that could be made
31 ## by building, but normally aren't because the distribution comes
34 ## Delete `.dvi' files here if they are not part of the distribution.
37 ## Delete all files from the current directory that are created by
38 ## configuring or building the program. If you have unpacked the
39 ## source and built the program without creating any other files,
40 ## `make distclean' should leave only the files that were in the
44 ## Delete everything from the current directory that can be
45 ## reconstructed with this Makefile. This typically includes
46 ## everything deleted by distclean, plus more: C source files
47 ## produced by Bison, tags tables, info files, and so on.
50 ## Still more severe - delete backup and autosave files, too.
53 #include "src/config.h"
56 RECURSIVE_MAKE=$(MAKE)
59 RECURSIVE_MAKE=@RECURSIVE_MAKE@
66 MAKEPATH=./lib-src/make-path
70 ## ==================== Things `configure' Might Edit ====================
79 ## These help us choose version- and architecture-specific directories
80 ## to install files in.
82 ## This should be the number of the XEmacs version we're building,
83 ## like `19.12' or `19.13'.
86 ## This should be the name of the configuration we're building XEmacs
87 ## for, like `mips-dec-ultrix' or `sparc-sun-sunos'.
88 configuration=@configuration@
90 ## This will be the name of the generated binary and is set automatically
94 ## ==================== Where To Install Things ====================
96 ## The default location for installation. Everything is placed in
97 ## subdirectories of this directory. The default values for many of
98 ## the variables below are expressed in terms of this one, so you may
99 ## not need to change them. This defaults to /usr/local.
102 ## Variable data (as per each program update) goes here
103 ## The default is ${PROGNAME}
104 inststaticdir=@inststaticdir@
106 ## Static data (constant across program updates) goes here
107 ## The default is ${PROGNAME}-${version}
108 instvardir=@instvardir@
110 ## Like `prefix', but used for architecture-specific files.
111 exec_prefix=@exec_prefix@
113 ## Where to install XEmacs and other binaries that people will want to
114 ## run directly (like etags).
117 ## Where to install architecture-independent data files.
118 ## ${lispdir} and ${etcdir} are subdirectories of this.
121 ## Where to find XEmacs packages.
124 ## Where to install and expect the files that XEmacs modifies as it runs.
125 ## These files are all architecture-independent. Right now, the
126 ## only such data is the locking directory;
129 ## Where to install and expect executable files to be run by XEmacs
130 ## rather than directly by users, and other architecture-dependent data
131 ## ${archlibdir} is a subdirectory of this.
134 ## Where to install XEmacs's man pages, and what extension they should have.
138 ## Where to install and expect the info files describing XEmacs. In the
139 ## past, this defaulted to a subdirectory of ${prefix}/lib/xemacs, but
140 ## since there are now many packages documented with the texinfo
141 ## system, it is inappropriate to imply that it is part of XEmacs.
145 ## See callproc.c for code which references this.
148 ## Where to find the source code. The source code for XEmacs's C kernel is
149 ## expected to be in ${srcdir}/src, and the source code for XEmacs's
150 ## utility programs is expected to be in ${srcdir}/lib-src. This is
151 ## set by the configure script's `--srcdir' option.
154 ## Where the build is done.
157 ## ==================== XEmacs-specific directories ====================
159 ## These variables hold the values XEmacs will actually use. They are
160 ## based on the values of the standard Make variables above.
162 ## Where to install the lisp files distributed with
163 ## XEmacs. This includes the XEmacs version, so that the
164 ## lisp files for different versions of XEmacs will install
165 ## themselves in separate directories.
168 ## Where to install the module files distributed with
169 ## XEmacs. This includes the XEmacs version, so that the
170 ## module files for different versions of XEmacs will install
171 ## themselves in separate directories.
172 moduledir=@moduledir@
174 ## Directory XEmacs should search for lisp files specific
175 ## to this site (i.e. customizations), before consulting
177 sitelispdir=@sitelispdir@
179 ## Directory XEmacs should search for module files specific
180 ## to this site (i.e. customizations), before consulting
182 sitemoduledir=@sitemoduledir@
184 ## Where XEmacs will search for its lisp files while
185 ## building. This is only used during the process of
186 ## compiling XEmacs, to help XEmacs find its lisp files
187 ## before they've been installed in their final location.
188 ## It's usually identical to lispdir, except that the
189 ## entry for the directory containing the installed lisp
190 ## files has been replaced with ../lisp. This should be a
191 ## colon-separated list of directories.
192 buildlispdir=${srcdir}/lisp
194 ## Where to install the other architecture-independent
195 ## data files distributed with XEmacs (like the tutorial,
196 ## the cookie recipes and the Zippy database). This path
197 ## usually contains the XEmacs version number, so the data
198 ## files for multiple versions of XEmacs may be installed
202 ## Where to put the DOC file.
205 ## Where to put executables to be run by XEmacs rather than
206 ## the user. This path usually includes the XEmacs version
207 ## and configuration name, so that multiple configurations
208 ## for multiple versions of XEmacs may be installed at
210 archlibdir=@archlibdir@
212 ## ==================== Utility Programs for the Build ====================
214 ## Allow the user to specify the install program.
215 INSTALL = @install_pp@ @INSTALL@
216 INSTALL_PROGRAM = @INSTALL_PROGRAM@
217 INSTALL_DATA = @INSTALL_DATA@
219 ## ============================= Targets ==============================
221 ## Subdirectories to make recursively. `lisp' is not included
222 ## because the compiled lisp files are part of the distribution
223 ## and you cannot remake them without installing XEmacs first.
224 MAKE_SUBDIR = @MAKE_SUBDIR@
226 ## Subdirectories that can be made recursively.
227 SUBDIR = ${MAKE_SUBDIR} man
229 ## Subdirectories that must be cleaned on distclean
230 SUBDIR_DISTCLEAN = ${SUBDIR} modules/sample modules/ldap modules/zlib modules/base64
232 ## The makefiles of the directories in ${MAKE_SUBDIR}.
233 SUBDIR_MAKEFILES = @SUBDIR_MAKEFILES@
235 ## Subdirectories to `make install-arch-dep' recursively
236 INSTALL_ARCH_DEP_SUBDIR = @INSTALL_ARCH_DEP_SUBDIR@
238 ## Subdirectories to install, and where they'll go.
239 ## lib-src's makefile knows how to install it, so we don't do that here.
240 ## When installing the info files, we need to do special things to
241 ## avoid nuking an existing dir file, so we don't do that here;
242 ## instead, we have written out explicit code in the `install' targets.
243 COPYDIR = ${srcdir}/etc ${srcdir}/lisp
244 COPYDESTS = ${etcdir} ${lispdir}
245 GENERATED_HEADERS = src/paths.h src/Emacs.ad.h src/config.h lwlib/config.h src/sheap-adjust.h
246 GENERATED_LISP = lisp/finder-inf.el
248 all: ${PROGNAME} all-elc info
250 ${PROGNAME}: ${GENERATED_HEADERS} ${MAKE_SUBDIR} ${GENERATED_LISP}
252 ## For performance and consistency, no built-in rules
255 .NO_PARALLEL: ${GENERATED_HEADERS} ${MAKE_SUBDIR} dump-elcs
256 .PHONY: ${SUBDIR} all beta all-elc all-elcs dump-elc dump-elcs autoloads finder
258 ## Convenience target for XEmacs beta testers
259 beta: clean all-elc finder info
261 ## Convenience target for XEmacs maintainers
262 ## This would run `make-xemacsdist' if I were really confident that everything
266 ## Convenience target for XEmacs maintainers
267 ## Updates some rarely generated files:
268 ## - configure from configure.in
269 ## - config.values.in from configure
270 ## - src/depend from src/*.[ch]
271 .PHONY: config configure depend
272 config: configure depend
273 configure: ${srcdir}/configure ${srcdir}/lib-src/config.values.in
275 ${srcdir}/configure : ${srcdir}/configure.in
276 cd ${srcdir} && autoconf
278 ${srcdir}/lib-src/config.values.in : ${srcdir}/configure
279 cd ${srcdir} && $(SHELL) lib-src/config.values.sh
281 depend ${srcdir}/src/depend:
282 cd ./src && $(RECURSIVE_MAKE) depend
284 ## Build XEmacs and recompile out-of-date and missing .elc files along
286 all-elc all-elcs: lib-src lwlib dump-elcs src
287 ${blddir}/src/${PROGNAME} -batch -vanilla \
288 -l update-elc-2.el -f batch-update-elc-2 lisp
290 ## Sub-target for all-elc.
291 dump-elc dump-elcs: ${GENERATED_HEADERS} FRC.dump-elcs
292 cd ./src && $(RECURSIVE_MAKE) dump-elcs
294 autoloads: lisp/auto-autoloads.el lisp/custom-load.el
296 FRC.lisp.auto.autoloads.el:
297 lisp/auto-autoloads.el: FRC.lisp.auto.autoloads.el
298 $(RM) lisp/auto-autoloads.el
299 ${blddir}/src/${PROGNAME} -batch -vanilla \
300 -l autoload -f batch-update-directory lisp
301 ${blddir}/src/${PROGNAME} -batch -vanilla \
302 -f batch-byte-compile lisp/auto-autoloads.el
303 @$(RM) lisp/auto-autoloads.el~
305 FRC.lisp.custom.load.el:
306 lisp/custom-load.el: FRC.lisp.custom.load.el
307 ${blddir}/src/${PROGNAME} -batch -vanilla -l cus-dep \
308 -f Custom-make-dependencies lisp
311 @echo "Building finder database ..."
313 ${blddir}/src/${PROGNAME} -batch -vanilla \
314 -eval '(setq finder-compile-keywords-quiet t)' \
315 -l finder -f finder-compile-keywords )
316 @echo "Building finder database ...(done)"
319 @echo "Building finder database ..."
321 ${blddir}/src/${PROGNAME} -batch -vanilla \
322 -eval '(setq finder-compile-keywords-quiet t)' \
323 -l finder -f finder-compile-keywords )
324 @echo "Building finder database ...(done)"
326 ## We have to force the building of Emacs.ad.h as well in order to get it
327 ## updated correctly when VPATH is being used. Since we use move-if-change,
328 ## it will only actually change if the user modified ${etcdir}/Emacs.ad.
329 src/Emacs.ad.h: ${srcdir}/etc/Emacs.ad
330 @echo "Producing \`src/Emacs.ad.h' from \`etc/Emacs.ad'."
331 @$(RM) src/Emacs.ad.h
332 @(echo "/* Do not edit this file!" ; \
333 echo " Automatically generated from ${srcdir}/etc/Emacs.ad" ; \
335 $(SHELL) ${srcdir}/lib-src/ad2c ${srcdir}/etc/Emacs.ad ) > \
339 @echo "Resetting \`src/sheap-adjust.h'."; \
340 (echo "/* Do not edit this file!" ; \
341 echo " Automatically generated by XEmacs */" ; \
342 echo "#define SHEAP_ADJUSTMENT 0") > $@
344 src: @SRC_SUBDIR_DEPS@ FRC.src
345 pkg-src/tree-x: pkg-src/FRC.tree-x
348 dynodump: FRC.dynodump
349 FRC.src FRC.lib-src FRC.lwlib FRC.dynodump pkg-src/FRC.tree-x:
350 FRC.lisp.finder-inf.el:
352 ${SUBDIR}: ${SUBDIR_MAKEFILES} ${GENERATED_HEADERS} FRC
353 cd ./$@ && $(RECURSIVE_MAKE) all
355 Makefile: ${srcdir}/Makefile.in config.status
358 src/Makefile: ${srcdir}/src/Makefile.in.in ${srcdir}/src/depend config.status
361 lib-src/Makefile: ${srcdir}/lib-src/Makefile.in.in config.status
364 lwlib/Makefile: ${srcdir}/lwlib/Makefile.in.in config.status
367 pkg-src/tree-x/Makefile: ${srcdir}/pkg-src/tree-x/Makefile.in.in config.status
370 src/config.h: ${srcdir}/src/config.h.in
371 ./config.status && touch $@
373 src/paths.h: ${srcdir}/src/paths.h.in
374 ./config.status && touch $@
376 lwlib/config.h: ${srcdir}/lwlib/config.h.in
377 ./config.status && touch $@
379 ## ==================== Installation ====================
381 ## If we let lib-src do its own installation, that means we
382 ## don't have to duplicate the list of utilities to install in
383 ## this Makefile as well.
385 ## On AIX, use tar xBf.
386 ## On Xenix, use tar xpf.
388 .PHONY: install-only install install-arch-dep install-arch-indep gzip.el mkdir
389 .PHONY: check-features
391 ## We delete each directory in ${COPYDESTS} before we copy into it;
392 ## that way, we can reinstall over directories that have been put in
393 ## place with their files read-only (perhaps because they are checked
394 ## into RCS). In order to make this safe, we make sure that the
395 ## source exists and is distinct from the destination.
397 ## FSF doesn't depend on `all', but rather on ${MAKE_SUBDIR}, so that
398 ## they "won't ever modify src/paths.h". But that means you can't do
399 ## 'make install' right off the bat because src/paths.h won't exist.
400 ## And, in XEmacs case, src/Emacs.ad.h won't exist either. I also
401 ## don't see the point in avoiding modifying paths.h. It creates an
402 ## inconsistency in the build process. So we go ahead and depend on
406 ${blddir}/src/${PROGNAME} -batch -l check-features.el
408 install-only: ${MAKE_SUBDIR} check-features install-arch-dep install-arch-indep
410 install: all check-features install-arch-dep install-arch-indep
412 install-arch-dep: mkdir
413 for subdir in ${INSTALL_ARCH_DEP_SUBDIR}; do \
414 (cd ./$${subdir} && $(RECURSIVE_MAKE) install prefix=${prefix} \
415 exec_prefix=${exec_prefix} bindir=${bindir} libdir=${libdir} \
416 archlibdir=${archlibdir}) ; done
417 if test "`(cd ${archlibdir} && $(pwd))`" != \
418 "`(cd ./lib-src && $(pwd))`"; then \
419 if test -f ../Installation; then \
420 ${INSTALL_DATA} ../Installation ${archlibdir}/Installation; \
422 ${INSTALL_DATA} lib-src/config.values ${docdir}/config.values; \
423 ${INSTALL_DATA} lib-src/DOC ${docdir}/DOC; \
424 for subdir in `find ${archlibdir} -type d ! -name RCS ! -name SCCS ! -name CVS -print` ; \
425 do (cd $${subdir} && $(RM) -r RCS CVS SCCS \#* *~) ; done ; \
428 ${INSTALL_DATA} src/${PROGNAME}.dmp ${bindir}/${PROGNAME}-${version}-`src/${PROGNAME} -sd`.dmp
431 ${INSTALL_PROGRAM} src/${PROGNAME} ${bindir}/${PROGNAME}
432 -chmod 0755 ${bindir}/${PROGNAME}
434 ${INSTALL_PROGRAM} src/${PROGNAME} ${bindir}/${PROGNAME}-${version}
435 -chmod 0755 ${bindir}/${PROGNAME}-${version}
437 cd ${bindir} && $(RM) ./${PROGNAME} && ${LN_S} ${PROGNAME}-${version}.exe ./${PROGNAME}
439 cd ${bindir} && $(RM) ./${PROGNAME} && ${LN_S} ${PROGNAME}-${version} ./${PROGNAME}
441 #endif /* WIN32_NATIVE */
442 if test "${prefix}" != "${exec_prefix}"; then \
443 $(MAKEPATH) ${exec_prefix}/lib/${instvardir}; \
445 lib/${inststaticdir} \
446 lib/${instvardir}/etc \
447 lib/${instvardir}/info \
448 lib/${instvardir}/lisp; do \
449 if test ! -d ${exec_prefix}/$${dir}; then \
450 $(LN_S) ${prefix}/$${dir} ${exec_prefix}/$${dir}; fi; \
454 install-arch-indep: mkdir info
455 -@set ${COPYDESTS} ; \
456 for dir in ${COPYDIR} ; do \
457 if test "`(cd $$1 && $(pwd))`" != \
458 "`(cd $${dir} && $(pwd))`"; then \
459 : do nothing - echo "rm -rf $$1" ; \
463 -set ${COPYDESTS} ; \
464 for dir in ${COPYDESTS} ; do \
465 if test ! -d $${dir} ; then mkdir $${dir} ; fi ; \
467 for dir in ${COPYDIR} ; do \
470 -a "`(cd $${dir} && $(pwd))`" != \
471 "`(cd $${dest} && $(pwd))`" \
472 && (echo "Copying $${dir}..." ; \
473 (cd $${dir} && $(TAR) -cf - . ) | \
474 (cd $${dest} && umask 022 && $(TAR) -xf - );\
475 chmod 0755 $${dest}; \
476 for subdir in `find $${dest} -type d ! -name RCS ! -name SCCS ! -name CVS -print` ; do \
477 (cd $${subdir} && $(RM) -r RCS CVS SCCS \#* *~) ; \
480 if test "`(cd ${srcdir}/info && $(pwd))`" != \
481 "`(cd ${infodir} && $(pwd))`" && cd ${srcdir}/info; then \
482 if test ! -f ${infodir}/dir -a -f dir ; then \
483 ${INSTALL_DATA} ${srcdir}/info/dir ${infodir}/dir ; \
485 for file in *.info* ; do \
486 ${INSTALL_DATA} $${file} ${infodir}/$${file} ; \
487 chmod 0644 ${infodir}/$${file}; \
490 cd ${srcdir}/etc && \
491 for page in xemacs etags ctags gnuserv gnuclient gnuattach gnudoit; do \
492 ${INSTALL_DATA} ${srcdir}/etc/$${page}.1 ${mandir}/$${page}${manext} ; \
493 chmod 0644 ${mandir}/$${page}${manext} ; \
495 @echo "If you would like to save approximately 2M of disk space, do"
497 @echo "or you may run "
498 @echo ${srcdir}/lib-src/gzip-el.sh lispdir " from the command line."
499 @echo "Where lispdir is where the lisp files were installed, i.e.,"
503 $(SHELL) ${srcdir}/lib-src/gzip-el.sh ${lispdir}
505 ## Build all the directories to install XEmacs in.
506 ## Since we may be creating several layers of directories,
507 ## (e.g. /usr/local/lib/${PROGNAME}-20.5/sparc-sun-solaris2.6), we use
508 ## make-path instead of mkdir. Not all mkdirs have the `-p' flag.
510 ${MAKEPATH} ${COPYDESTS} ${docdir} ${infodir} ${archlibdir} \
511 ${mandir} ${bindir} ${datadir} ${libdir} ${pkgdir} \
512 ${sitelispdir} ${moduledir} ${sitemoduledir}
514 ## Delete all the installed files that the `install' target would
515 ## create (but not the noninstalled files such as `make all' would
518 #### Don't delete the lisp and etc directories if they're in the source tree.
519 #### This target has not been updated in sometime and until it is it
520 #### would be extremely dangerous for anyone to use it.
523 ## $(RECURSIVE_MAKE) uninstall \
524 ## prefix=${prefix} exec_prefix=${exec_prefix} \
525 ## bindir=${bindir} libdir=${libdir} archlibdir=${archlibdir})
526 ## for dir in ${lispdir} ${etcdir} ; do \
527 ## case `(cd $${dir} ; $(pwd))` in \
528 ## `(cd ${srcdir} ; $(pwd))`* ) ;; \
529 ## * ) $(RM) $${dir} ;; \
532 ## ${datadir}/${PROGNAME}/${version}/* ) \
533 ## $(RM) -r ${datadir}/${PROGNAME}/${version} \
537 ## cd ${infodir} && $(RM) cl* ${PROGNAME}* forms* info* vip*
538 ## cd ${mandir} && $(RM) xemacs.1 etags.1 ctags.1 gnuserv.1
539 ## cd ${bindir} && $(RM) ${PROGNAME}-${version} ${PROGNAME}
542 ## Some makes seem to remember that they've built something called FRC,
543 ## so you can only use a given FRC once per makefile.
544 FRC FRC.src.paths.h FRC.mkdir FRC.dump-elcs FRC.info:
545 FRC.mostlyclean FRC.clean FRC.distclean FRC.realclean FRC.tags:
547 ## ==================== Cleaning up and miscellanea ====================
549 .PHONY: mostlyclean clean distclean realclean extraclean
552 ## Like `clean', but may refrain from deleting a few files that people
553 ## normally don't want to recompile. For example, the `mostlyclean'
554 ## target for GCC does not delete `libgcc.a', because recompiling it
555 ## is rarely necessary and takes a lot of time.
556 mostlyclean: FRC.mostlyclean
557 for d in $(SUBDIR); do (cd ./$$d && $(RECURSIVE_MAKE) $@); done
560 ## Delete all files from the current directory that are normally
561 ## created by building the program. Don't delete the files that
562 ## record the configuration. Also preserve files that could be made
563 ## by building, but normally aren't because the distribution comes
566 ## Delete `.dvi' files here if they are not part of the distribution.
568 for d in $(SUBDIR); do (cd ./$$d && $(RECURSIVE_MAKE) $@); done
572 ## Delete all files from the current directory that are created by
573 ## configuring or building the program. If you have unpacked the
574 ## source and built the program without creating any other files,
575 ## `make distclean' should leave only the files that were in the
578 $(RM) config.status config.log confdefs.h config-tmp-* build-install Installation ; \
579 $(RM) core .sbinit lock/* GNUmakefile Makefile Makefile.in ; \
580 $(RM) lisp/finder-inf.el* Installation.el Installation.elc ; \
581 $(RM) -r site-packages xemacs-packages mule-packages site-lisp
583 distclean: FRC.distclean
584 for d in $(SUBDIR_DISTCLEAN); do (cd ./$$d && $(RECURSIVE_MAKE) $@); done
588 ## Delete everything from the current directory that can be
589 ## reconstructed with this Makefile. This typically includes
590 ## everything deleted by distclean, plus more: C source files
591 ## produced by Bison, tags tables, info files, and so on.
593 ## One exception, however: `make realclean' should not delete
594 ## `configure' even if `configure' can be remade using a rule in the
595 ## Makefile. More generally, `make realclean' should not delete
596 ## anything that needs to exist in order to run `configure' and then
597 ## begin to build the program.
598 realclean: FRC.realclean
599 for d in $(SUBDIR); do (cd ./$$d && $(RECURSIVE_MAKE) $@); done
603 ## This doesn't actually appear in the coding standards, but Karl
604 ## says GCC supports it, and that's where the configuration part of
605 ## the coding standards seem to come from. It's like distclean, but
606 ## it deletes backup and autosave files too.
608 for d in $(SUBDIR); do (cd ./$$d && $(RECURSIVE_MAKE) $@); done
612 ## Unlocking and relocking. The idea of these productions is to reduce
613 ## hassles when installing an incremental tar of XEmacs. Do `make unlock'
614 ## before unlocking the file to take the write locks off all sources so
615 ## that tar xvof will overwrite them without fuss. Then do `make relock'
616 ## afterward so that VC mode will know which files should be checked in
617 ## if you want to mung them.
619 ## Note: it's no disaster if these productions miss a file or two; tar
620 ## and VC will swiftly let you know if this happens, and it is easily
622 SOURCES = ChangeLog GETTING.GNU.SOFTWARE INSTALL Makefile.in PROBLEMS \
623 README build-install.in configure make-dist move-if-change
625 .PHONY: unlock relock TAGS tags check dist info dvi mcs
628 chmod u+w $(SOURCES) cpp/*
629 -cd ./elisp && chmod u+w Makefile README *.texi
630 for d in src etc lib-src lisp; do (cd ./$$d && $(RECURSIVE_MAKE) $@); done
631 cd ./lisp/term && chmod u+w README *.el
632 cd ./man && chmod u+w *texi* ChangeLog split-man
633 cd ./lwlib && chmod u+w *.[ch] Makefile.in.in
636 chmod u-w $(SOURCES) cpp/*
637 -cd ./elisp && chmod u-w Makefile README *.texi
638 for d in src etc lib-src lisp; do (cd ./$$d && $(RECURSIVE_MAKE) $@); done
639 cd ./lisp/term && chmod u+w README *.el
640 cd ./man && chmod u+w *texi* ChangeLog split-man
641 cd ./lwlib && chmod u+w *.[ch] Makefile.in.in
643 PRUNE_VC = -name SCCS -prune -o -name RCS -prune -o -name CVS -prune -o
646 @echo "If you don't have a copy of etags around, then do 'make lib-src' first."
648 @PATH=`$(pwd)`/lib-src:$$PATH HOME=/-=-; export PATH HOME; \
649 echo "Using etags from `which etags`."
650 PATH=`$(pwd)`/lib-src:$$PATH ; export PATH; cd ${srcdir} && \
651 find src lwlib lib-src ${PRUNE_VC} -name '*.[ch]' -print | \
652 xargs etags -a -r '/[ ]*DEF\(VAR\|INE\)_[A-Z_]+[ ]*([ ]*"\([^"]+\)"/\2/'; \
653 find ${tagslisp} ${PRUNE_VC} -name '*.el' ! -name 'auto-autoloads.el' -print | \
654 xargs etags -a -l none -r "/^(def\\(var\\|un\\|alias\\|const\\|macro\\|subst\\|struct\\|face\\|group\\|custom\\|ine-\\(function\\|compiler-macro\\|[a-z-]+alias\\)\\)[ ]+'?\\([^ ]+\\)/\\3/"
657 cd ./src && $(RECURSIVE_MAKE) $@
660 cd ${srcdir}/man && $(RECURSIVE_MAKE) $@
663 cd ${srcdir}/man && $(RECURSIVE_MAKE) $@
665 ## Fix up version information in executables (Solaris-only)
667 date=`LANG=C LC_ALL=C date -u '+%e %b %Y'`; \
668 ident="@(#)RELEASE VERSION XEmacs ${version} $${date}"; \
669 for f in `file lib-src/* src/${PROGNAME} | grep ELF | sed -e 's/:.*//'`; do \
670 mcs -da "$${ident} `echo $${f} | sed 's/.*\///'`" $${f}; \