1 ## DIST: This is the distribution Makefile for XEmacs. configure can
2 ## DIST: make most of the changes to this file you might want, so try
5 ## This file is part of XEmacs.
7 ## XEmacs is free software; you can redistribute it and/or modify it
8 ## under the terms of the GNU General Public License as published by the
9 ## Free Software Foundation; either version 2, or (at your option) any
12 ## XEmacs is distributed in the hope that it will be useful, but WITHOUT
13 ## ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
14 ## FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License
17 ## You should have received a copy of the GNU General Public License
18 ## along with XEmacs; see the file COPYING. If not, write to
19 ## the Free Software Foundation, Inc., 59 Temple Place - Suite 330,
20 ## Boston, MA 02111-1307, USA.
22 ## make all to compile and build XEmacs.
23 ## make install to build and install it.
24 ## make install-only to install after a previous complete build
25 ## make TAGS to update tags tables.
27 ## make clean or make mostlyclean
28 ## Delete all files from the current directory that are normally
29 ## created by building the program. Don't delete the files that
30 ## record the configuration. Also preserve files that could be made
31 ## by building, but normally aren't because the distribution comes
34 ## Delete `.dvi' files here if they are not part of the distribution.
37 ## Delete all files from the current directory that are created by
38 ## configuring or building the program. If you have unpacked the
39 ## source and built the program without creating any other files,
40 ## `make distclean' should leave only the files that were in the
44 ## Delete everything from the current directory that can be
45 ## reconstructed with this Makefile. This typically includes
46 ## everything deleted by distclean, plus more: C source files
47 ## produced by Bison, tags tables, info files, and so on.
50 ## Still more severe - delete backup and autosave files, too.
53 #include "src/config.h"
56 RECURSIVE_MAKE=$(MAKE)
59 RECURSIVE_MAKE=@RECURSIVE_MAKE@
66 MAKEPATH=./lib-src/make-path
69 ## ==================== Things `configure' Might Edit ====================
77 ## These help us choose version- and architecture-specific directories
78 ## to install files in.
80 ## This should be the number of the XEmacs version we're building,
81 ## like `19.12' or `19.13'.
84 ## This should be the name of the configuration we're building XEmacs
85 ## for, like `mips-dec-ultrix' or `sparc-sun-sunos'.
86 configuration=@configuration@
88 ## This will be the name of the generated binary and is set automatically
92 ## ==================== Where To Install Things ====================
94 ## The default location for installation. Everything is placed in
95 ## subdirectories of this directory. The default values for many of
96 ## the variables below are expressed in terms of this one, so you may
97 ## not need to change them. This defaults to /usr/local.
100 ## Variable data (as per each program update) goes here
101 ## The default is ${PROGNAME}
102 inststaticdir=@inststaticdir@
104 ## Static data (constant across program updates) goes here
105 ## The default is ${PROGNAME}-${version}
106 instvardir=@instvardir@
108 ## Like `prefix', but used for architecture-specific files.
109 exec_prefix=@exec_prefix@
111 ## Where to install XEmacs and other binaries that people will want to
112 ## run directly (like etags).
115 ## Where to install architecture-independent data files.
116 ## ${lispdir} and ${etcdir} are subdirectories of this.
119 ## Where to find XEmacs packages.
122 ## Where to install and expect the files that XEmacs modifies as it runs.
123 ## These files are all architecture-independent. Right now, the
124 ## only such data is the locking directory;
125 ## ${lockdir} is a subdirectory of this.
128 ## Where to install and expect executable files to be run by XEmacs
129 ## rather than directly by users, and other architecture-dependent data
130 ## ${archlibdir} is a subdirectory of this.
133 ## Where to install XEmacs's man pages, and what extension they should have.
137 ## Where to install and expect the info files describing XEmacs. In the
138 ## past, this defaulted to a subdirectory of ${prefix}/lib/xemacs, but
139 ## since there are now many packages documented with the texinfo
140 ## system, it is inappropriate to imply that it is part of XEmacs.
144 ## See callproc.c for code which references this.
147 ## Where to find the source code. The source code for XEmacs's C kernel is
148 ## expected to be in ${srcdir}/src, and the source code for XEmacs's
149 ## utility programs is expected to be in ${srcdir}/lib-src. This is
150 ## set by the configure script's `--srcdir' option.
153 ## Where the build is done.
156 ## ==================== XEmacs-specific directories ====================
158 ## These variables hold the values XEmacs will actually use. They are
159 ## based on the values of the standard Make variables above.
161 ## Where to install the lisp files distributed with
162 ## XEmacs. This includes the XEmacs version, so that the
163 ## lisp files for different versions of XEmacs will install
164 ## themselves in separate directories.
167 ## Where to install the module files distributed with
168 ## XEmacs. This includes the XEmacs version, so that the
169 ## module files for different versions of XEmacs will install
170 ## themselves in separate directories.
171 moduledir=@moduledir@
173 ## Directory XEmacs should search for lisp files specific
174 ## to this site (i.e. customizations), before consulting
176 sitelispdir=@sitelispdir@
178 ## Directory XEmacs should search for module files specific
179 ## to this site (i.e. customizations), before consulting
181 sitemoduledir=@sitemoduledir@
183 ## Where XEmacs will search for its lisp files while
184 ## building. This is only used during the process of
185 ## compiling XEmacs, to help XEmacs find its lisp files
186 ## before they've been installed in their final location.
187 ## It's usually identical to lispdir, except that the
188 ## entry for the directory containing the installed lisp
189 ## files has been replaced with ../lisp. This should be a
190 ## colon-separated list of directories.
191 buildlispdir=${srcdir}/lisp
193 ## Where to install the other architecture-independent
194 ## data files distributed with XEmacs (like the tutorial,
195 ## the cookie recipes and the Zippy database). This path
196 ## usually contains the XEmacs version number, so the data
197 ## files for multiple versions of XEmacs may be installed
201 ## Where to create and expect the locking directory, where
202 ## the XEmacs locking code keeps track of which files are
203 ## currently being edited.
206 ## Where to put the DOC file.
209 ## Where to put executables to be run by XEmacs rather than
210 ## the user. This path usually includes the XEmacs version
211 ## and configuration name, so that multiple configurations
212 ## for multiple versions of XEmacs may be installed at
214 archlibdir=@archlibdir@
216 ## ==================== Utility Programs for the Build ====================
218 ## Allow the user to specify the install program.
219 INSTALL = @install_pp@ @INSTALL@
220 INSTALL_PROGRAM = @INSTALL_PROGRAM@
221 INSTALL_DATA = @INSTALL_DATA@
223 ## ============================= Targets ==============================
225 ## Subdirectories to make recursively. `lisp' is not included
226 ## because the compiled lisp files are part of the distribution
227 ## and you cannot remake them without installing XEmacs first.
228 MAKE_SUBDIR = @MAKE_SUBDIR@
230 ## Subdirectories that can be made recursively.
231 SUBDIR = ${MAKE_SUBDIR} man
233 ## Subdirectories that must be cleaned on distclean
234 SUBDIR_DISTCLEAN = ${SUBDIR} modules/sample modules/ldap modules/zlib modules/base64
236 ## The makefiles of the directories in ${MAKE_SUBDIR}.
237 SUBDIR_MAKEFILES = @SUBDIR_MAKEFILES@
239 ## Subdirectories to `make install-arch-dep' recursively
240 INSTALL_ARCH_DEP_SUBDIR = @INSTALL_ARCH_DEP_SUBDIR@
242 ## Subdirectories to install, and where they'll go.
243 ## lib-src's makefile knows how to install it, so we don't do that here.
244 ## When installing the info files, we need to do special things to
245 ## avoid nuking an existing dir file, so we don't do that here;
246 ## instead, we have written out explicit code in the `install' targets.
247 COPYDIR = ${srcdir}/etc ${srcdir}/lisp
248 COPYDESTS = ${etcdir} ${lispdir}
249 GENERATED_HEADERS = src/paths.h src/Emacs.ad.h src/config.h lwlib/config.h src/sheap-adjust.h
250 GENERATED_LISP = lisp/finder-inf.el
252 all: ${PROGNAME} all-elc info
254 ${PROGNAME}: ${GENERATED_HEADERS} ${MAKE_SUBDIR} ${GENERATED_LISP}
256 ## For performance and consistency, no built-in rules
259 .NO_PARALLEL: ${GENERATED_HEADERS} ${MAKE_SUBDIR} dump-elcs
260 .PHONY: ${SUBDIR} all beta all-elc all-elcs dump-elc dump-elcs autoloads finder
262 ## Convenience target for XEmacs beta testers
263 beta: clean all-elc finder
265 ## Convenience target for XEmacs maintainers
266 ## This would run `make-xemacsdist' if I were really confident that everything
270 ## Convenience target for XEmacs maintainers
271 ## Updates some rarely generated files:
272 ## - configure from configure.in
273 ## - config.values.in from configure
274 ## - src/depend from src/*.[ch]
275 .PHONY: config configure depend
276 config: configure depend
277 configure: ${srcdir}/configure ${srcdir}/lib-src/config.values.in
279 ${srcdir}/configure : ${srcdir}/configure.in
280 cd ${srcdir} && autoconf
282 ${srcdir}/lib-src/config.values.in : ${srcdir}/configure
283 cd ${srcdir} && $(SHELL) lib-src/config.values.sh
285 depend ${srcdir}/src/depend :
286 cd ${srcdir}/src && $(RECURSIVE_MAKE) depend
288 ## Build XEmacs and recompile out-of-date and missing .elc files along
290 all-elc all-elcs: lib-src lwlib dump-elcs src
291 MAKE='$(MAKE)' EMACS='./src/$(PROGNAME)' $(SHELL) ${srcdir}/lib-src/update-elc.sh
293 ## Sub-target for all-elc.
294 dump-elc dump-elcs: ${GENERATED_HEADERS} FRC.dump-elcs
295 cd ./src && $(RECURSIVE_MAKE) dump-elcs
298 MAKE='$(MAKE)' EMACS='./src/$(PROGNAME)' $(SHELL) ${srcdir}/lib-src/update-autoloads.sh
301 MAKE='$(MAKE)' EMACS='./src/$(PROGNAME)' $(SHELL) ${srcdir}/lib-src/update-custom.sh
304 @echo "Building finder database ..."
306 ${blddir}/src/${PROGNAME} -batch -vanilla \
307 -eval '(setq finder-compile-keywords-quiet t)' \
308 -l finder -f finder-compile-keywords )
309 @echo "Building finder database ...(done)"
312 @echo "Building finder database ..."
314 ${blddir}/src/${PROGNAME} -batch -vanilla \
315 -eval '(setq finder-compile-keywords-quiet t)' \
316 -l finder -f finder-compile-keywords )
317 @echo "Building finder database ...(done)"
319 ## We have to force the building of Emacs.ad.h as well in order to get it
320 ## updated correctly when VPATH is being used. Since we use move-if-change,
321 ## it will only actually change if the user modified ${etcdir}/Emacs.ad.
322 src/Emacs.ad.h: ${srcdir}/etc/Emacs.ad
323 @echo "Producing \`src/Emacs.ad.h' from \`etc/Emacs.ad'."
324 @$(RM) src/Emacs.ad.h
325 @(echo "/* Do not edit this file!" ; \
326 echo " Automatically generated from ${srcdir}/etc/Emacs.ad" ; \
328 $(SHELL) ${srcdir}/lib-src/ad2c ${srcdir}/etc/Emacs.ad ) > \
332 @echo "Resetting \`src/sheap-adjust.h'."; \
333 (echo "/* Do not edit this file!" ; \
334 echo " Automatically generated by XEmacs */" ; \
335 echo "#define SHEAP_ADJUSTMENT 0") > $@
337 src: @SRC_SUBDIR_DEPS@ FRC.src
338 pkg-src/tree-x: pkg-src/FRC.tree-x
341 dynodump: FRC.dynodump
342 FRC.src FRC.lib-src FRC.lwlib FRC.dynodump pkg-src/FRC.tree-x:
343 FRC.lisp.finder-inf.el:
345 ${SUBDIR}: ${SUBDIR_MAKEFILES} ${GENERATED_HEADERS} FRC
346 cd ./$@ && $(RECURSIVE_MAKE) all
348 Makefile: ${srcdir}/Makefile.in config.status
351 src/Makefile: ${srcdir}/src/Makefile.in.in ${srcdir}/src/depend config.status
354 lib-src/Makefile: ${srcdir}/lib-src/Makefile.in.in config.status
357 lwlib/Makefile: ${srcdir}/lwlib/Makefile.in.in config.status
360 pkg-src/tree-x/Makefile: ${srcdir}/pkg-src/tree-x/Makefile.in.in config.status
363 src/config.h: ${srcdir}/src/config.h.in
364 ./config.status && touch $@
366 src/paths.h: ${srcdir}/src/paths.h.in
367 ./config.status && touch $@
369 lwlib/config.h: ${srcdir}/lwlib/config.h.in
370 ./config.status && touch $@
372 ## ==================== Installation ====================
374 ## If we let lib-src do its own installation, that means we
375 ## don't have to duplicate the list of utilities to install in
376 ## this Makefile as well.
378 ## On AIX, use tar xBf.
379 ## On Xenix, use tar xpf.
381 .PHONY: install-only install install-arch-dep install-arch-indep gzip.el mkdir
382 .PHONY: check-features
384 ## We delete each directory in ${COPYDESTS} before we copy into it;
385 ## that way, we can reinstall over directories that have been put in
386 ## place with their files read-only (perhaps because they are checked
387 ## into RCS). In order to make this safe, we make sure that the
388 ## source exists and is distinct from the destination.
390 ## FSF doesn't depend on `all', but rather on ${MAKE_SUBDIR}, so that
391 ## they "won't ever modify src/paths.h". But that means you can't do
392 ## 'make install' right off the bat because src/paths.h won't exist.
393 ## And, in XEmacs case, src/Emacs.ad.h won't exist either. I also
394 ## don't see the point in avoiding modifying paths.h. It creates an
395 ## inconsistency in the build process. So we go ahead and depend on
399 ${blddir}/src/${PROGNAME} -batch -l check-features.el
401 install-only: ${MAKE_SUBDIR} check-features install-arch-dep install-arch-indep
403 install: all check-features install-arch-dep install-arch-indep
405 install-arch-dep: mkdir
406 for subdir in ${INSTALL_ARCH_DEP_SUBDIR}; do \
407 (cd ./$${subdir} && $(RECURSIVE_MAKE) install prefix=${prefix} \
408 exec_prefix=${exec_prefix} bindir=${bindir} libdir=${libdir} \
409 archlibdir=${archlibdir}) ; done
410 if test "`(cd ${archlibdir} && $(pwd))`" != \
411 "`(cd ./lib-src && $(pwd))`"; then \
412 if test -f ../Installation; then \
413 ${INSTALL_DATA} ../Installation ${archlibdir}/Installation; \
415 ${INSTALL_DATA} lib-src/config.values ${docdir}/config.values; \
416 ${INSTALL_DATA} lib-src/DOC ${docdir}/DOC; \
417 for subdir in `find ${archlibdir} -type d ! -name RCS ! -name SCCS ! -name CVS -print` ; \
418 do (cd $${subdir} && $(RM) -r RCS CVS SCCS \#* *~) ; done ; \
421 ${INSTALL_PROGRAM} src/${PROGNAME} ${bindir}/${PROGNAME}
422 -chmod 0755 ${bindir}/${PROGNAME}
424 ${INSTALL_PROGRAM} src/${PROGNAME} ${bindir}/${PROGNAME}-${version}
425 -chmod 0755 ${bindir}/${PROGNAME}-${version}
427 cd ${bindir} && $(RM) ./${PROGNAME} && ${LN_S} ${PROGNAME}-${version}.exe ./${PROGNAME}
429 cd ${bindir} && $(RM) ./${PROGNAME} && ${LN_S} ${PROGNAME}-${version} ./${PROGNAME}
430 # endif /* __CYGWIN32__ */
431 #endif /* WINDOWSNT */
432 if test "${prefix}" != "${exec_prefix}"; then \
433 $(MAKEPATH) ${exec_prefix}/lib/${instvardir}; \
435 lib/${inststaticdir} \
436 lib/${instvardir}/etc \
437 lib/${instvardir}/info \
438 lib/${instvardir}/lisp; do \
439 if test ! -d ${exec_prefix}/$${dir}; then \
440 $(LN_S) ${prefix}/$${dir} ${exec_prefix}/$${dir}; fi; \
444 install-arch-indep: mkdir info
445 -@set ${COPYDESTS} ; \
446 for dir in ${COPYDIR} ; do \
447 if test "`(cd $$1 && $(pwd))`" != \
448 "`(cd $${dir} && $(pwd))`"; then \
449 : do nothing - echo "rm -rf $$1" ; \
453 -set ${COPYDESTS} ; \
454 for dir in ${COPYDESTS} ; do \
455 if test ! -d $${dir} ; then mkdir $${dir} ; fi ; \
457 for dir in ${COPYDIR} ; do \
460 -a "`(cd $${dir} && $(pwd))`" != \
461 "`(cd $${dest} && $(pwd))`" \
462 && (echo "Copying $${dir}..." ; \
463 (cd $${dir} && tar -cf - . ) | \
464 (cd $${dest} && umask 022 && tar -xf - );\
465 chmod 0755 $${dest}; \
466 for subdir in `find $${dest} -type d ! -name RCS ! -name SCCS ! -name CVS -print` ; do \
467 (cd $${subdir} && $(RM) -r RCS CVS SCCS \#* *~) ; \
470 if test "`(cd ${srcdir}/info && $(pwd))`" != \
471 "`(cd ${infodir} && $(pwd))`" && cd ${srcdir}/info; then \
472 if test ! -f ${infodir}/dir -a -f dir ; then \
473 ${INSTALL_DATA} ${srcdir}/info/dir ${infodir}/dir ; \
475 for file in *.info* ; do \
476 ${INSTALL_DATA} $${file} ${infodir}/$${file} ; \
477 chmod 0644 ${infodir}/$${file}; \
480 cd ${srcdir}/etc && \
481 for page in xemacs etags ctags gnuserv gnuclient gnuattach gnudoit; do \
482 ${INSTALL_DATA} ${srcdir}/etc/$${page}.1 ${mandir}/$${page}${manext} ; \
483 chmod 0644 ${mandir}/$${page}${manext} ; \
485 @echo "If you would like to save approximately 2M of disk space, do"
487 @echo "or you may run "
488 @echo ${srcdir}/lib-src/gzip-el.sh lispdir " from the command line."
489 @echo "Where lispdir is where the lisp files were installed, i.e.,"
493 $(SHELL) ${srcdir}/lib-src/gzip-el.sh ${lispdir}
495 ## Build all the directories to install XEmacs in.
496 ## Since we may be creating several layers of directories,
497 ## (e.g. /usr/local/lib/${PROGNAME}-20.5/sparc-sun-solaris2.6), we use
498 ## make-path instead of mkdir. Not all mkdirs have the `-p' flag.
500 ${MAKEPATH} ${COPYDESTS} ${lockdir} ${docdir} ${infodir} ${archlibdir} \
501 ${mandir} ${bindir} ${datadir} ${libdir} ${pkgdir} \
502 ${sitelispdir} ${moduledir} ${sitemoduledir}
503 -chmod 0777 ${lockdir}
505 ## Delete all the installed files that the `install' target would
506 ## create (but not the noninstalled files such as `make all' would
509 #### Don't delete the lisp and etc directories if they're in the source tree.
510 #### This target has not been updated in sometime and until it is it
511 #### would be extremely dangerous for anyone to use it.
514 ## $(RECURSIVE_MAKE) uninstall \
515 ## prefix=${prefix} exec_prefix=${exec_prefix} \
516 ## bindir=${bindir} libdir=${libdir} archlibdir=${archlibdir})
517 ## for dir in ${lispdir} ${etcdir} ; do \
518 ## case `(cd $${dir} ; $(pwd))` in \
519 ## `(cd ${srcdir} ; $(pwd))`* ) ;; \
520 ## * ) $(RM) $${dir} ;; \
523 ## ${datadir}/${PROGNAME}/${version}/* ) \
524 ## $(RM) -r ${datadir}/${PROGNAME}/${version} \
528 ## cd ${infodir} && $(RM) cl* ${PROGNAME}* forms* info* vip*
529 ## cd ${mandir} && $(RM) xemacs.1 etags.1 ctags.1 gnuserv.1
530 ## cd ${bindir} && $(RM) ${PROGNAME}-${version} ${PROGNAME}
533 ## Some makes seem to remember that they've built something called FRC,
534 ## so you can only use a given FRC once per makefile.
535 FRC FRC.src.paths.h FRC.mkdir FRC.dump-elcs FRC.info:
536 FRC.mostlyclean FRC.clean FRC.distclean FRC.realclean FRC.tags:
538 ## ==================== Cleaning up and miscellanea ====================
540 .PHONY: mostlyclean clean distclean realclean extraclean
543 ## Like `clean', but may refrain from deleting a few files that people
544 ## normally don't want to recompile. For example, the `mostlyclean'
545 ## target for GCC does not delete `libgcc.a', because recompiling it
546 ## is rarely necessary and takes a lot of time.
547 mostlyclean: FRC.mostlyclean
548 for d in $(SUBDIR); do (cd ./$$d && $(RECURSIVE_MAKE) $@); done
551 ## Delete all files from the current directory that are normally
552 ## created by building the program. Don't delete the files that
553 ## record the configuration. Also preserve files that could be made
554 ## by building, but normally aren't because the distribution comes
557 ## Delete `.dvi' files here if they are not part of the distribution.
559 for d in $(SUBDIR); do (cd ./$$d && $(RECURSIVE_MAKE) $@); done
563 ## Delete all files from the current directory that are created by
564 ## configuring or building the program. If you have unpacked the
565 ## source and built the program without creating any other files,
566 ## `make distclean' should leave only the files that were in the
569 $(RM) config.status config.log confdefs.h config-tmp-* build-install Installation ; \
570 $(RM) core .sbinit lock/* GNUmakefile Makefile Makefile.in ; \
571 $(RM) lisp/finder-inf.el* Installation.el Installation.elc ; \
572 $(RM) -r site-packages xemacs-packages mule-packages site-lisp
574 distclean: FRC.distclean
575 for d in $(SUBDIR_DISTCLEAN); do (cd ./$$d && $(RECURSIVE_MAKE) $@); done
579 ## Delete everything from the current directory that can be
580 ## reconstructed with this Makefile. This typically includes
581 ## everything deleted by distclean, plus more: C source files
582 ## produced by Bison, tags tables, info files, and so on.
584 ## One exception, however: `make realclean' should not delete
585 ## `configure' even if `configure' can be remade using a rule in the
586 ## Makefile. More generally, `make realclean' should not delete
587 ## anything that needs to exist in order to run `configure' and then
588 ## begin to build the program.
589 realclean: FRC.realclean
590 for d in $(SUBDIR); do (cd ./$$d && $(RECURSIVE_MAKE) $@); done
594 ## This doesn't actually appear in the coding standards, but Karl
595 ## says GCC supports it, and that's where the configuration part of
596 ## the coding standards seem to come from. It's like distclean, but
597 ## it deletes backup and autosave files too.
599 for d in $(SUBDIR); do (cd ./$$d && $(RECURSIVE_MAKE) $@); done
603 ## Unlocking and relocking. The idea of these productions is to reduce
604 ## hassles when installing an incremental tar of XEmacs. Do `make unlock'
605 ## before unlocking the file to take the write locks off all sources so
606 ## that tar xvof will overwrite them without fuss. Then do `make relock'
607 ## afterward so that VC mode will know which files should be checked in
608 ## if you want to mung them.
610 ## Note: it's no disaster if these productions miss a file or two; tar
611 ## and VC will swiftly let you know if this happens, and it is easily
613 SOURCES = ChangeLog GETTING.GNU.SOFTWARE INSTALL Makefile.in PROBLEMS \
614 README build-install.in configure make-dist move-if-change
616 .PHONY: unlock relock TAGS tags check dist info dvi mcs
619 chmod u+w $(SOURCES) cpp/*
620 -cd ./elisp && chmod u+w Makefile README *.texi
621 for d in src etc lib-src lisp; do (cd ./$$d && $(RECURSIVE_MAKE) $@); done
622 cd ./lisp/term && chmod u+w README *.el
623 cd ./man && chmod u+w *texi* ChangeLog split-man
624 cd ./lwlib && chmod u+w *.[ch] Makefile.in.in
627 chmod u-w $(SOURCES) cpp/*
628 -cd ./elisp && chmod u-w Makefile README *.texi
629 for d in src etc lib-src lisp; do (cd ./$$d && $(RECURSIVE_MAKE) $@); done
630 cd ./lisp/term && chmod u+w README *.el
631 cd ./man && chmod u+w *texi* ChangeLog split-man
632 cd ./lwlib && chmod u+w *.[ch] Makefile.in.in
634 PRUNE_VC = -name SCCS -prune -o -name RCS -prune -o -name CVS -prune -o
637 @echo "If you don't have a copy of etags around, then do 'make lib-src' first."
639 @PATH=`$(pwd)`/lib-src:$$PATH HOME=/-=-; export PATH HOME; \
640 echo "Using etags from `which etags`."
641 PATH=`$(pwd)`/lib-src:$$PATH ; export PATH; cd ${srcdir} && \
642 find src lwlib lib-src ${PRUNE_VC} -name '*.[ch]' -print | \
643 xargs etags -a -r '/[ ]*DEF\(VAR\|INE\)_[A-Z_]+[ ]*([ ]*"\([^"]+\)"/\2/'; \
644 find ${tagslisp} ${PRUNE_VC} -name '*.el' ! -name 'auto-autoloads.el' -print | \
645 xargs etags -a -l none -r "/^(def\\(var\\|un\\|alias\\|const\\|macro\\|subst\\|struct\\|face\\|group\\|custom\\|ine-\\(function\\|compiler-macro\\|[a-z-]+alias\\)\\)[ ]+'?\\([^ ]+\\)/\\3/"
648 cd ./src && $(RECURSIVE_MAKE) $@
651 cd ${srcdir}/man && $(RECURSIVE_MAKE) $@
654 cd ${srcdir}/man && $(RECURSIVE_MAKE) $@
656 ## Fix up version information in executables (Solaris-only)
658 date=`LANG=C LC_ALL=C date -u '+%e %b %Y'`; \
659 ident="@(#)RELEASE VERSION XEmacs ${version} $${date}"; \
660 for f in `file lib-src/* src/${PROGNAME} | grep ELF | sed -e 's/:.*//'`; do \
661 mcs -da "$${ident} `echo $${f} | sed 's/.*\///'`" $${f}; \