1 /* Extended regular expression matching and search library,
2 version 0.12, extended for XEmacs.
3 (Implements POSIX draft P10003.2/D11.2, except for
4 internationalization features.)
6 Copyright (C) 1993, 1994, 1995 Free Software Foundation, Inc.
7 Copyright (C) 1995 Sun Microsystems, Inc.
8 Copyright (C) 1995 Ben Wing.
10 This program is free software; you can redistribute it and/or modify
11 it under the terms of the GNU General Public License as published by
12 the Free Software Foundation; either version 2, or (at your option)
15 This program is distributed in the hope that it will be useful,
16 but WITHOUT ANY WARRANTY; without even the implied warranty of
17 MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
18 GNU General Public License for more details.
20 You should have received a copy of the GNU General Public License
21 along with this program; see the file COPYING. If not, write to
22 the Free Software Foundation, Inc., 59 Temple Place - Suite 330,
23 Boston, MA 02111-1307, USA. */
25 /* Synched up with: FSF 19.29. */
27 /* Changes made for XEmacs:
29 (1) the REGEX_BEGLINE_CHECK code from the XEmacs v18 regex routines
30 was added. This causes a huge speedup in font-locking.
31 (2) Rel-alloc is disabled when the MMAP version of rel-alloc is
32 being used, because it's too slow -- all those calls to mmap()
33 add humongous overhead.
34 (3) Lots and lots of changes for Mule. They are bracketed by
35 `#ifdef MULE' or with comments that have `XEmacs' in them.
42 #ifndef REGISTER /* Rigidly enforced as of 20.3 */
50 /* We assume non-Mule if emacs isn't defined. */
55 /* We need this for `regex.h', and perhaps for the Emacs include files. */
56 #include <sys/types.h>
58 /* This is for other GNU distributions with internationalized messages. */
59 #if defined (I18N3) && (defined (HAVE_LIBINTL_H) || defined (_LIBC))
62 # define gettext(msgid) (msgid)
65 /* XEmacs: define this to add in a speedup for patterns anchored at
66 the beginning of a line. Keep the ifdefs so that it's easier to
67 tell where/why this code has diverged from v19. */
68 #define REGEX_BEGLINE_CHECK
70 /* XEmacs: the current mmap-based ralloc handles small blocks very
71 poorly, so we disable it here. */
73 #if (defined (REL_ALLOC) && defined (HAVE_MMAP)) || defined(DOUG_LEA_MALLOC)
77 /* The `emacs' switch turns on certain matching commands
78 that make sense only in Emacs. */
85 #if (defined (DEBUG_XEMACS) && !defined (DEBUG))
91 Lisp_Object Vthe_lisp_rangetab;
94 complex_vars_of_regex (void)
96 Vthe_lisp_rangetab = Fmake_range_table ();
97 staticpro (&Vthe_lisp_rangetab);
103 complex_vars_of_regex (void)
109 #define RE_TRANSLATE(ch) TRT_TABLE_OF (translate, (Emchar) ch)
110 #define TRANSLATE_P(tr) (!NILP (tr))
112 #else /* not emacs */
114 /* If we are not linking with Emacs proper,
115 we can't use the relocating allocator
116 even if config.h says that we can. */
119 #if defined (STDC_HEADERS) || defined (_LIBC)
126 #define charptr_emchar(str) ((Emchar) (str)[0])
128 #if (LONGBITS > INTBITS)
129 # define EMACS_INT long
131 # define EMACS_INT int
136 #define INC_CHARPTR(p) ((p)++)
137 #define DEC_CHARPTR(p) ((p)--)
141 /* Define the syntax stuff for \<, \>, etc. */
143 /* This must be nonzero for the wordchar and notwordchar pattern
144 commands in re_match_2. */
151 extern char *re_syntax_table;
153 #else /* not SYNTAX_TABLE */
155 /* How many characters in the character set. */
156 #define CHAR_SET_SIZE 256
158 static char re_syntax_table[CHAR_SET_SIZE];
161 init_syntax_once (void)
167 const char *word_syntax_chars =
168 "ABCDEFGHIJKLMNOPQRSTUVWXYZabcdefghijklmnopqrstuvwxyz0123456789_";
170 memset (re_syntax_table, 0, sizeof (re_syntax_table));
172 while (*word_syntax_chars)
173 re_syntax_table[(unsigned int)(*word_syntax_chars++)] = Sword;
179 #endif /* SYNTAX_TABLE */
181 #define SYNTAX_UNSAFE(ignored, c) re_syntax_table[c]
183 #define RE_TRANSLATE(c) translate[(unsigned char) (c)]
184 #define TRANSLATE_P(tr) tr
188 /* Under XEmacs, this is needed because we don't define it elsewhere. */
189 #ifdef SWITCH_ENUM_BUG
190 #define SWITCH_ENUM_CAST(x) ((int)(x))
192 #define SWITCH_ENUM_CAST(x) (x)
196 /* Get the interface, including the syntax bits. */
199 /* isalpha etc. are used for the character classes. */
202 /* Jim Meyering writes:
204 "... Some ctype macros are valid only for character codes that
205 isascii says are ASCII (SGI's IRIX-4.0.5 is one such system --when
206 using /bin/cc or gcc but without giving an ansi option). So, all
207 ctype uses should be through macros like ISPRINT... If
208 STDC_HEADERS is defined, then autoconf has verified that the ctype
209 macros don't need to be guarded with references to isascii. ...
210 Defining isascii to 1 should let any compiler worth its salt
211 eliminate the && through constant folding." */
213 #if defined (STDC_HEADERS) || (!defined (isascii) && !defined (HAVE_ISASCII))
214 #define ISASCII_1(c) 1
216 #define ISASCII_1(c) isascii(c)
220 /* The IS*() macros can be passed any character, including an extended
221 one. We need to make sure there are no crashes, which would occur
222 otherwise due to out-of-bounds array references. */
223 #define ISASCII(c) (((EMACS_UINT) (c)) < 0x100 && ISASCII_1 (c))
225 #define ISASCII(c) ISASCII_1 (c)
229 #define ISBLANK(c) (ISASCII (c) && isblank (c))
231 #define ISBLANK(c) ((c) == ' ' || (c) == '\t')
234 #define ISGRAPH(c) (ISASCII (c) && isgraph (c))
236 #define ISGRAPH(c) (ISASCII (c) && isprint (c) && !isspace (c))
239 #define ISPRINT(c) (ISASCII (c) && isprint (c))
240 #define ISDIGIT(c) (ISASCII (c) && isdigit (c))
241 #define ISALNUM(c) (ISASCII (c) && isalnum (c))
242 #define ISALPHA(c) (ISASCII (c) && isalpha (c))
243 #define ISCNTRL(c) (ISASCII (c) && iscntrl (c))
244 #define ISLOWER(c) (ISASCII (c) && islower (c))
245 #define ISPUNCT(c) (ISASCII (c) && ispunct (c))
246 #define ISSPACE(c) (ISASCII (c) && isspace (c))
247 #define ISUPPER(c) (ISASCII (c) && isupper (c))
248 #define ISXDIGIT(c) (ISASCII (c) && isxdigit (c))
251 #define NULL (void *)0
254 /* We remove any previous definition of `SIGN_EXTEND_CHAR',
255 since ours (we hope) works properly with all combinations of
256 machines, compilers, `char' and `unsigned char' argument types.
257 (Per Bothner suggested the basic approach.) */
258 #undef SIGN_EXTEND_CHAR
260 #define SIGN_EXTEND_CHAR(c) ((signed char) (c))
261 #else /* not __STDC__ */
262 /* As in Harbison and Steele. */
263 #define SIGN_EXTEND_CHAR(c) ((((unsigned char) (c)) ^ 128) - 128)
266 /* Should we use malloc or alloca? If REGEX_MALLOC is not defined, we
267 use `alloca' instead of `malloc'. This is because using malloc in
268 re_search* or re_match* could cause memory leaks when C-g is used in
269 Emacs; also, malloc is slower and causes storage fragmentation. On
270 the other hand, malloc is more portable, and easier to debug.
272 Because we sometimes use alloca, some routines have to be macros,
273 not functions -- `alloca'-allocated space disappears at the end of the
274 function it is called in. */
278 #define REGEX_ALLOCATE malloc
279 #define REGEX_REALLOCATE(source, osize, nsize) realloc (source, nsize)
280 #define REGEX_FREE free
282 #else /* not REGEX_MALLOC */
284 /* Emacs already defines alloca, sometimes. */
287 /* Make alloca work the best possible way. */
289 #define alloca __builtin_alloca
290 #else /* not __GNUC__ */
293 #else /* not __GNUC__ or HAVE_ALLOCA_H */
294 #ifndef _AIX /* Already did AIX, up at the top. */
296 #endif /* not _AIX */
297 #endif /* HAVE_ALLOCA_H */
298 #endif /* __GNUC__ */
300 #endif /* not alloca */
302 #define REGEX_ALLOCATE alloca
304 /* Assumes a `char *destination' variable. */
305 #define REGEX_REALLOCATE(source, osize, nsize) \
306 (destination = (char *) alloca (nsize), \
307 memmove (destination, source, osize), \
310 /* No need to do anything to free, after alloca. */
311 #define REGEX_FREE(arg) ((void)0) /* Do nothing! But inhibit gcc warning. */
313 #endif /* REGEX_MALLOC */
315 /* Define how to allocate the failure stack. */
318 #define REGEX_ALLOCATE_STACK(size) \
319 r_alloc ((char **) &failure_stack_ptr, (size))
320 #define REGEX_REALLOCATE_STACK(source, osize, nsize) \
321 r_re_alloc ((char **) &failure_stack_ptr, (nsize))
322 #define REGEX_FREE_STACK(ptr) \
323 r_alloc_free ((void **) &failure_stack_ptr)
325 #else /* not REL_ALLOC */
329 #define REGEX_ALLOCATE_STACK malloc
330 #define REGEX_REALLOCATE_STACK(source, osize, nsize) realloc (source, nsize)
331 #define REGEX_FREE_STACK free
333 #else /* not REGEX_MALLOC */
335 #define REGEX_ALLOCATE_STACK alloca
337 #define REGEX_REALLOCATE_STACK(source, osize, nsize) \
338 REGEX_REALLOCATE (source, osize, nsize)
339 /* No need to explicitly free anything. */
340 #define REGEX_FREE_STACK(arg)
342 #endif /* REGEX_MALLOC */
343 #endif /* REL_ALLOC */
346 /* True if `size1' is non-NULL and PTR is pointing anywhere inside
347 `string1' or just past its end. This works if PTR is NULL, which is
349 #define FIRST_STRING_P(ptr) \
350 (size1 && string1 <= (ptr) && (ptr) <= string1 + size1)
352 /* (Re)Allocate N items of type T using malloc, or fail. */
353 #define TALLOC(n, t) ((t *) malloc ((n) * sizeof (t)))
354 #define RETALLOC(addr, n, t) ((addr) = (t *) realloc (addr, (n) * sizeof (t)))
355 #define RETALLOC_IF(addr, n, t) \
356 if (addr) RETALLOC((addr), (n), t); else (addr) = TALLOC ((n), t)
357 #define REGEX_TALLOC(n, t) ((t *) REGEX_ALLOCATE ((n) * sizeof (t)))
359 #define BYTEWIDTH 8 /* In bits. */
361 #define STREQ(s1, s2) (strcmp (s1, s2) == 0)
365 #define MAX(a, b) ((a) > (b) ? (a) : (b))
366 #define MIN(a, b) ((a) < (b) ? (a) : (b))
368 /* Type of source-pattern and string chars. */
369 typedef const unsigned char re_char;
371 typedef char boolean;
376 /* These are the command codes that appear in compiled regular
377 expressions. Some opcodes are followed by argument bytes. A
378 command code can specify any interpretation whatsoever for its
379 arguments. Zero bytes may appear in the compiled regular expression. */
385 /* Succeed right away--no more backtracking. */
388 /* Followed by one byte giving n, then by n literal bytes. */
391 /* Matches any (more or less) character. */
394 /* Matches any one char belonging to specified set. First
395 following byte is number of bitmap bytes. Then come bytes
396 for a bitmap saying which chars are in. Bits in each byte
397 are ordered low-bit-first. A character is in the set if its
398 bit is 1. A character too large to have a bit in the map is
399 automatically not in the set. */
402 /* Same parameters as charset, but match any character that is
403 not one of those specified. */
406 /* Start remembering the text that is matched, for storing in a
407 register. Followed by one byte with the register number, in
408 the range 0 to one less than the pattern buffer's re_nsub
409 field. Then followed by one byte with the number of groups
410 inner to this one. (This last has to be part of the
411 start_memory only because we need it in the on_failure_jump
415 /* Stop remembering the text that is matched and store it in a
416 memory register. Followed by one byte with the register
417 number, in the range 0 to one less than `re_nsub' in the
418 pattern buffer, and one byte with the number of inner groups,
419 just like `start_memory'. (We need the number of inner
420 groups here because we don't have any easy way of finding the
421 corresponding start_memory when we're at a stop_memory.) */
424 /* Match a duplicate of something remembered. Followed by one
425 byte containing the register number. */
428 /* Fail unless at beginning of line. */
431 /* Fail unless at end of line. */
434 /* Succeeds if at beginning of buffer (if emacs) or at beginning
435 of string to be matched (if not). */
438 /* Analogously, for end of buffer/string. */
441 /* Followed by two byte relative address to which to jump. */
444 /* Same as jump, but marks the end of an alternative. */
447 /* Followed by two-byte relative address of place to resume at
448 in case of failure. */
451 /* Like on_failure_jump, but pushes a placeholder instead of the
452 current string position when executed. */
453 on_failure_keep_string_jump,
455 /* Throw away latest failure point and then jump to following
456 two-byte relative address. */
459 /* Change to pop_failure_jump if know won't have to backtrack to
460 match; otherwise change to jump. This is used to jump
461 back to the beginning of a repeat. If what follows this jump
462 clearly won't match what the repeat does, such that we can be
463 sure that there is no use backtracking out of repetitions
464 already matched, then we change it to a pop_failure_jump.
465 Followed by two-byte address. */
468 /* Jump to following two-byte address, and push a dummy failure
469 point. This failure point will be thrown away if an attempt
470 is made to use it for a failure. A `+' construct makes this
471 before the first repeat. Also used as an intermediary kind
472 of jump when compiling an alternative. */
475 /* Push a dummy failure point and continue. Used at the end of
479 /* Followed by two-byte relative address and two-byte number n.
480 After matching N times, jump to the address upon failure. */
483 /* Followed by two-byte relative address, and two-byte number n.
484 Jump to the address N times, then fail. */
487 /* Set the following two-byte relative address to the
488 subsequent two-byte number. The address *includes* the two
492 wordchar, /* Matches any word-constituent character. */
493 notwordchar, /* Matches any char that is not a word-constituent. */
495 wordbeg, /* Succeeds if at word beginning. */
496 wordend, /* Succeeds if at word end. */
498 wordbound, /* Succeeds if at a word boundary. */
499 notwordbound /* Succeeds if not at a word boundary. */
502 ,before_dot, /* Succeeds if before point. */
503 at_dot, /* Succeeds if at point. */
504 after_dot, /* Succeeds if after point. */
506 /* Matches any character whose syntax is specified. Followed by
507 a byte which contains a syntax code, e.g., Sword. */
510 /* Matches any character whose syntax is not that specified. */
516 /* need extra stuff to be able to properly work with XEmacs/Mule
517 characters (which may take up more than one byte) */
519 ,charset_mule, /* Matches any character belonging to specified set.
520 The set is stored in "unified range-table
521 format"; see rangetab.c. Unlike the `charset'
522 opcode, this can handle arbitrary characters. */
524 charset_mule_not /* Same parameters as charset_mule, but match any
525 character that is not one of those specified. */
527 /* 97/2/17 jhod: The following two were merged back in from the Mule
528 2.3 code to enable some language specific processing */
529 ,categoryspec, /* Matches entries in the character category tables */
530 notcategoryspec /* The opposite of the above */
535 /* Common operations on the compiled pattern. */
537 /* Store NUMBER in two contiguous bytes starting at DESTINATION. */
539 #define STORE_NUMBER(destination, number) \
541 (destination)[0] = (number) & 0377; \
542 (destination)[1] = (number) >> 8; \
545 /* Same as STORE_NUMBER, except increment DESTINATION to
546 the byte after where the number is stored. Therefore, DESTINATION
547 must be an lvalue. */
549 #define STORE_NUMBER_AND_INCR(destination, number) \
551 STORE_NUMBER (destination, number); \
552 (destination) += 2; \
555 /* Put into DESTINATION a number stored in two contiguous bytes starting
558 #define EXTRACT_NUMBER(destination, source) \
560 (destination) = *(source) & 0377; \
561 (destination) += SIGN_EXTEND_CHAR (*((source) + 1)) << 8; \
566 extract_number (int *dest, re_char *source)
568 int temp = SIGN_EXTEND_CHAR (*(source + 1));
569 *dest = *source & 0377;
573 #ifndef EXTRACT_MACROS /* To debug the macros. */
574 #undef EXTRACT_NUMBER
575 #define EXTRACT_NUMBER(dest, src) extract_number (&dest, src)
576 #endif /* not EXTRACT_MACROS */
580 /* Same as EXTRACT_NUMBER, except increment SOURCE to after the number.
581 SOURCE must be an lvalue. */
583 #define EXTRACT_NUMBER_AND_INCR(destination, source) \
585 EXTRACT_NUMBER (destination, source); \
591 extract_number_and_incr (int *destination, unsigned char **source)
593 extract_number (destination, *source);
597 #ifndef EXTRACT_MACROS
598 #undef EXTRACT_NUMBER_AND_INCR
599 #define EXTRACT_NUMBER_AND_INCR(dest, src) \
600 extract_number_and_incr (&dest, &src)
601 #endif /* not EXTRACT_MACROS */
605 /* If DEBUG is defined, Regex prints many voluminous messages about what
606 it is doing (if the variable `debug' is nonzero). If linked with the
607 main program in `iregex.c', you can enter patterns and strings
608 interactively. And if linked with the main program in `main.c' and
609 the other test files, you can run the already-written tests. */
613 /* We use standard I/O for debugging. */
617 /* XEmacs provides its own version of assert() */
618 /* It is useful to test things that ``must'' be true when debugging. */
622 static int debug = 0;
624 #define DEBUG_STATEMENT(e) e
625 #define DEBUG_PRINT1(x) if (debug) printf (x)
626 #define DEBUG_PRINT2(x1, x2) if (debug) printf (x1, x2)
627 #define DEBUG_PRINT3(x1, x2, x3) if (debug) printf (x1, x2, x3)
628 #define DEBUG_PRINT4(x1, x2, x3, x4) if (debug) printf (x1, x2, x3, x4)
629 #define DEBUG_PRINT_COMPILED_PATTERN(p, s, e) \
630 if (debug) print_partial_compiled_pattern (s, e)
631 #define DEBUG_PRINT_DOUBLE_STRING(w, s1, sz1, s2, sz2) \
632 if (debug) print_double_string (w, s1, sz1, s2, sz2)
635 /* Print the fastmap in human-readable form. */
638 print_fastmap (char *fastmap)
640 unsigned was_a_range = 0;
643 while (i < (1 << BYTEWIDTH))
649 while (i < (1 << BYTEWIDTH) && fastmap[i])
665 /* Print a compiled pattern string in human-readable form, starting at
666 the START pointer into it and ending just before the pointer END. */
669 print_partial_compiled_pattern (re_char *start, re_char *end)
672 unsigned char *p = (unsigned char *) start;
681 /* Loop over pattern commands. */
684 printf ("%ld:\t", (long)(p - start));
686 switch ((re_opcode_t) *p++)
694 printf ("/exactn/%d", mcnt);
705 printf ("/start_memory/%d/%d", mcnt, *p++);
710 printf ("/stop_memory/%d/%d", mcnt, *p++);
714 printf ("/duplicate/%d", *p++);
724 REGISTER int c, last = -100;
725 REGISTER int in_range = 0;
727 printf ("/charset [%s",
728 (re_opcode_t) *(p - 1) == charset_not ? "^" : "");
730 assert (p + *p < pend);
732 for (c = 0; c < 256; c++)
733 if (((unsigned char) (c / 8) < *p)
734 && (p[1 + (c/8)] & (1 << (c % 8))))
736 /* Are we starting a range? */
737 if (last + 1 == c && ! in_range)
742 /* Have we broken a range? */
743 else if (last + 1 != c && in_range)
766 case charset_mule_not:
770 printf ("/charset_mule [%s",
771 (re_opcode_t) *(p - 1) == charset_mule_not ? "^" : "");
772 nentries = unified_range_table_nentries (p);
773 for (i = 0; i < nentries; i++)
775 EMACS_INT first, last;
776 Lisp_Object dummy_val;
778 unified_range_table_get_range (p, i, &first, &last,
783 printf ("(0x%lx)", (long)first);
790 printf ("(0x%lx)", (long)last);
794 p += unified_range_table_bytes_used (p);
807 case on_failure_jump:
808 extract_number_and_incr (&mcnt, &p);
809 printf ("/on_failure_jump to %ld", (long)(p + mcnt - start));
812 case on_failure_keep_string_jump:
813 extract_number_and_incr (&mcnt, &p);
814 printf ("/on_failure_keep_string_jump to %ld", (long)(p + mcnt - start));
817 case dummy_failure_jump:
818 extract_number_and_incr (&mcnt, &p);
819 printf ("/dummy_failure_jump to %ld", (long)(p + mcnt - start));
822 case push_dummy_failure:
823 printf ("/push_dummy_failure");
827 extract_number_and_incr (&mcnt, &p);
828 printf ("/maybe_pop_jump to %ld", (long)(p + mcnt - start));
831 case pop_failure_jump:
832 extract_number_and_incr (&mcnt, &p);
833 printf ("/pop_failure_jump to %ld", (long)(p + mcnt - start));
837 extract_number_and_incr (&mcnt, &p);
838 printf ("/jump_past_alt to %ld", (long)(p + mcnt - start));
842 extract_number_and_incr (&mcnt, &p);
843 printf ("/jump to %ld", (long)(p + mcnt - start));
847 extract_number_and_incr (&mcnt, &p);
848 extract_number_and_incr (&mcnt2, &p);
849 printf ("/succeed_n to %ld, %d times", (long)(p + mcnt - start), mcnt2);
853 extract_number_and_incr (&mcnt, &p);
854 extract_number_and_incr (&mcnt2, &p);
855 printf ("/jump_n to %ld, %d times", (long)(p + mcnt - start), mcnt2);
859 extract_number_and_incr (&mcnt, &p);
860 extract_number_and_incr (&mcnt2, &p);
861 printf ("/set_number_at location %ld to %d", (long)(p + mcnt - start), mcnt2);
865 printf ("/wordbound");
869 printf ("/notwordbound");
881 printf ("/before_dot");
889 printf ("/after_dot");
893 printf ("/syntaxspec");
895 printf ("/%d", mcnt);
899 printf ("/notsyntaxspec");
901 printf ("/%d", mcnt);
905 /* 97/2/17 jhod Mule category patch */
907 printf ("/categoryspec");
909 printf ("/%d", mcnt);
912 case notcategoryspec:
913 printf ("/notcategoryspec");
915 printf ("/%d", mcnt);
917 /* end of category patch */
922 printf ("/wordchar");
926 printf ("/notwordchar");
938 printf ("?%d", *(p-1));
944 printf ("%ld:\tend of pattern.\n", (long)(p - start));
949 print_compiled_pattern (struct re_pattern_buffer *bufp)
951 re_char *buffer = bufp->buffer;
953 print_partial_compiled_pattern (buffer, buffer + bufp->used);
954 printf ("%ld bytes used/%ld bytes allocated.\n", bufp->used,
957 if (bufp->fastmap_accurate && bufp->fastmap)
959 printf ("fastmap: ");
960 print_fastmap (bufp->fastmap);
963 printf ("re_nsub: %ld\t", (long)bufp->re_nsub);
964 printf ("regs_alloc: %d\t", bufp->regs_allocated);
965 printf ("can_be_null: %d\t", bufp->can_be_null);
966 printf ("newline_anchor: %d\n", bufp->newline_anchor);
967 printf ("no_sub: %d\t", bufp->no_sub);
968 printf ("not_bol: %d\t", bufp->not_bol);
969 printf ("not_eol: %d\t", bufp->not_eol);
970 printf ("syntax: %d\n", bufp->syntax);
971 /* Perhaps we should print the translate table? */
972 /* and maybe the category table? */
977 print_double_string (re_char *where, re_char *string1, int size1,
978 re_char *string2, int size2)
984 unsigned int this_char;
986 if (FIRST_STRING_P (where))
988 for (this_char = where - string1; this_char < size1; this_char++)
989 putchar (string1[this_char]);
994 for (this_char = where - string2; this_char < size2; this_char++)
995 putchar (string2[this_char]);
999 #else /* not DEBUG */
1004 #define DEBUG_STATEMENT(e)
1005 #define DEBUG_PRINT1(x)
1006 #define DEBUG_PRINT2(x1, x2)
1007 #define DEBUG_PRINT3(x1, x2, x3)
1008 #define DEBUG_PRINT4(x1, x2, x3, x4)
1009 #define DEBUG_PRINT_COMPILED_PATTERN(p, s, e)
1010 #define DEBUG_PRINT_DOUBLE_STRING(w, s1, sz1, s2, sz2)
1014 /* Set by `re_set_syntax' to the current regexp syntax to recognize. Can
1015 also be assigned to arbitrarily: each pattern buffer stores its own
1016 syntax, so it can be changed between regex compilations. */
1017 /* This has no initializer because initialized variables in Emacs
1018 become read-only after dumping. */
1019 reg_syntax_t re_syntax_options;
1022 /* Specify the precise syntax of regexps for compilation. This provides
1023 for compatibility for various utilities which historically have
1024 different, incompatible syntaxes.
1026 The argument SYNTAX is a bit mask comprised of the various bits
1027 defined in regex.h. We return the old syntax. */
1030 re_set_syntax (reg_syntax_t syntax)
1032 reg_syntax_t ret = re_syntax_options;
1034 re_syntax_options = syntax;
1038 /* This table gives an error message for each of the error codes listed
1039 in regex.h. Obviously the order here has to be same as there.
1040 POSIX doesn't require that we do anything for REG_NOERROR,
1041 but why not be nice? */
1043 static const char *re_error_msgid[] =
1045 "Success", /* REG_NOERROR */
1046 "No match", /* REG_NOMATCH */
1047 "Invalid regular expression", /* REG_BADPAT */
1048 "Invalid collation character", /* REG_ECOLLATE */
1049 "Invalid character class name", /* REG_ECTYPE */
1050 "Trailing backslash", /* REG_EESCAPE */
1051 "Invalid back reference", /* REG_ESUBREG */
1052 "Unmatched [ or [^", /* REG_EBRACK */
1053 "Unmatched ( or \\(", /* REG_EPAREN */
1054 "Unmatched \\{", /* REG_EBRACE */
1055 "Invalid content of \\{\\}", /* REG_BADBR */
1056 "Invalid range end", /* REG_ERANGE */
1057 "Memory exhausted", /* REG_ESPACE */
1058 "Invalid preceding regular expression", /* REG_BADRPT */
1059 "Premature end of regular expression", /* REG_EEND */
1060 "Regular expression too big", /* REG_ESIZE */
1061 "Unmatched ) or \\)", /* REG_ERPAREN */
1063 "Invalid syntax designator", /* REG_ESYNTAX */
1066 "Ranges may not span charsets", /* REG_ERANGESPAN */
1067 "Invalid category designator", /* REG_ECATEGORY */
1071 /* Avoiding alloca during matching, to placate r_alloc. */
1073 /* Define MATCH_MAY_ALLOCATE unless we need to make sure that the
1074 searching and matching functions should not call alloca. On some
1075 systems, alloca is implemented in terms of malloc, and if we're
1076 using the relocating allocator routines, then malloc could cause a
1077 relocation, which might (if the strings being searched are in the
1078 ralloc heap) shift the data out from underneath the regexp
1081 Here's another reason to avoid allocation: Emacs
1082 processes input from X in a signal handler; processing X input may
1083 call malloc; if input arrives while a matching routine is calling
1084 malloc, then we're scrod. But Emacs can't just block input while
1085 calling matching routines; then we don't notice interrupts when
1086 they come in. So, Emacs blocks input around all regexp calls
1087 except the matching calls, which it leaves unprotected, in the
1088 faith that they will not malloc. */
1090 /* Normally, this is fine. */
1091 #define MATCH_MAY_ALLOCATE
1093 /* When using GNU C, we are not REALLY using the C alloca, no matter
1094 what config.h may say. So don't take precautions for it. */
1099 /* The match routines may not allocate if (1) they would do it with malloc
1100 and (2) it's not safe for them to use malloc.
1101 Note that if REL_ALLOC is defined, matching would not use malloc for the
1102 failure stack, but we would still use it for the register vectors;
1103 so REL_ALLOC should not affect this. */
1104 #if (defined (C_ALLOCA) || defined (REGEX_MALLOC)) && defined (emacs)
1105 #undef MATCH_MAY_ALLOCATE
1109 /* Failure stack declarations and macros; both re_compile_fastmap and
1110 re_match_2 use a failure stack. These have to be macros because of
1111 REGEX_ALLOCATE_STACK. */
1114 /* Number of failure points for which to initially allocate space
1115 when matching. If this number is exceeded, we allocate more
1116 space, so it is not a hard limit. */
1117 #ifndef INIT_FAILURE_ALLOC
1118 #define INIT_FAILURE_ALLOC 5
1121 /* Roughly the maximum number of failure points on the stack. Would be
1122 exactly that if always used MAX_FAILURE_SPACE each time we failed.
1123 This is a variable only so users of regex can assign to it; we never
1124 change it ourselves. */
1125 #if defined (MATCH_MAY_ALLOCATE)
1126 /* 4400 was enough to cause a crash on Alpha OSF/1,
1127 whose default stack limit is 2mb. */
1128 int re_max_failures = 20000;
1130 int re_max_failures = 2000;
1133 union fail_stack_elt
1139 typedef union fail_stack_elt fail_stack_elt_t;
1143 fail_stack_elt_t *stack;
1145 size_t avail; /* Offset of next open position. */
1148 #define FAIL_STACK_EMPTY() (fail_stack.avail == 0)
1149 #define FAIL_STACK_PTR_EMPTY() (fail_stack_ptr->avail == 0)
1150 #define FAIL_STACK_FULL() (fail_stack.avail == fail_stack.size)
1153 /* Define macros to initialize and free the failure stack.
1154 Do `return -2' if the alloc fails. */
1156 #ifdef MATCH_MAY_ALLOCATE
1157 #define INIT_FAIL_STACK() \
1159 fail_stack.stack = (fail_stack_elt_t *) \
1160 REGEX_ALLOCATE_STACK (INIT_FAILURE_ALLOC * sizeof (fail_stack_elt_t)); \
1162 if (fail_stack.stack == NULL) \
1165 fail_stack.size = INIT_FAILURE_ALLOC; \
1166 fail_stack.avail = 0; \
1169 #define RESET_FAIL_STACK() REGEX_FREE_STACK (fail_stack.stack)
1171 #define INIT_FAIL_STACK() \
1173 fail_stack.avail = 0; \
1176 #define RESET_FAIL_STACK()
1180 /* Double the size of FAIL_STACK, up to approximately `re_max_failures' items.
1182 Return 1 if succeeds, and 0 if either ran out of memory
1183 allocating space for it or it was already too large.
1185 REGEX_REALLOCATE_STACK requires `destination' be declared. */
1187 #define DOUBLE_FAIL_STACK(fail_stack) \
1188 ((fail_stack).size > re_max_failures * MAX_FAILURE_ITEMS \
1190 : ((fail_stack).stack = (fail_stack_elt_t *) \
1191 REGEX_REALLOCATE_STACK ((fail_stack).stack, \
1192 (fail_stack).size * sizeof (fail_stack_elt_t), \
1193 ((fail_stack).size << 1) * sizeof (fail_stack_elt_t)), \
1195 (fail_stack).stack == NULL \
1197 : ((fail_stack).size <<= 1, \
1201 /* Push pointer POINTER on FAIL_STACK.
1202 Return 1 if was able to do so and 0 if ran out of memory allocating
1204 #define PUSH_PATTERN_OP(POINTER, FAIL_STACK) \
1205 ((FAIL_STACK_FULL () \
1206 && !DOUBLE_FAIL_STACK (FAIL_STACK)) \
1208 : ((FAIL_STACK).stack[(FAIL_STACK).avail++].pointer = POINTER, \
1211 /* Push a pointer value onto the failure stack.
1212 Assumes the variable `fail_stack'. Probably should only
1213 be called from within `PUSH_FAILURE_POINT'. */
1214 #define PUSH_FAILURE_POINTER(item) \
1215 fail_stack.stack[fail_stack.avail++].pointer = (unsigned char *) (item)
1217 /* This pushes an integer-valued item onto the failure stack.
1218 Assumes the variable `fail_stack'. Probably should only
1219 be called from within `PUSH_FAILURE_POINT'. */
1220 #define PUSH_FAILURE_INT(item) \
1221 fail_stack.stack[fail_stack.avail++].integer = (item)
1223 /* Push a fail_stack_elt_t value onto the failure stack.
1224 Assumes the variable `fail_stack'. Probably should only
1225 be called from within `PUSH_FAILURE_POINT'. */
1226 #define PUSH_FAILURE_ELT(item) \
1227 fail_stack.stack[fail_stack.avail++] = (item)
1229 /* These three POP... operations complement the three PUSH... operations.
1230 All assume that `fail_stack' is nonempty. */
1231 #define POP_FAILURE_POINTER() fail_stack.stack[--fail_stack.avail].pointer
1232 #define POP_FAILURE_INT() fail_stack.stack[--fail_stack.avail].integer
1233 #define POP_FAILURE_ELT() fail_stack.stack[--fail_stack.avail]
1235 /* Used to omit pushing failure point id's when we're not debugging. */
1237 #define DEBUG_PUSH PUSH_FAILURE_INT
1238 #define DEBUG_POP(item_addr) *(item_addr) = POP_FAILURE_INT ()
1240 #define DEBUG_PUSH(item)
1241 #define DEBUG_POP(item_addr)
1245 /* Push the information about the state we will need
1246 if we ever fail back to it.
1248 Requires variables fail_stack, regstart, regend, reg_info, and
1249 num_regs be declared. DOUBLE_FAIL_STACK requires `destination' be
1252 Does `return FAILURE_CODE' if runs out of memory. */
1254 #if !defined (REGEX_MALLOC) && !defined (REL_ALLOC)
1255 #define DECLARE_DESTINATION char *destination
1257 #define DECLARE_DESTINATION DECLARE_NOTHING
1260 #define PUSH_FAILURE_POINT(pattern_place, string_place, failure_code) \
1262 DECLARE_DESTINATION; \
1263 /* Must be int, so when we don't save any registers, the arithmetic \
1264 of 0 + -1 isn't done as unsigned. */ \
1267 DEBUG_STATEMENT (failure_id++); \
1268 DEBUG_STATEMENT (nfailure_points_pushed++); \
1269 DEBUG_PRINT2 ("\nPUSH_FAILURE_POINT #%u:\n", failure_id); \
1270 DEBUG_PRINT2 (" Before push, next avail: %lu\n", \
1271 (unsigned long) (fail_stack).avail); \
1272 DEBUG_PRINT2 (" size: %lu\n", \
1273 (unsigned long) (fail_stack).size); \
1275 DEBUG_PRINT2 (" slots needed: %d\n", NUM_FAILURE_ITEMS); \
1276 DEBUG_PRINT2 (" available: %ld\n", \
1277 (long) REMAINING_AVAIL_SLOTS); \
1279 /* Ensure we have enough space allocated for what we will push. */ \
1280 while (REMAINING_AVAIL_SLOTS < NUM_FAILURE_ITEMS) \
1282 if (!DOUBLE_FAIL_STACK (fail_stack)) \
1283 return failure_code; \
1285 DEBUG_PRINT2 ("\n Doubled stack; size now: %lu\n", \
1286 (unsigned long) (fail_stack).size); \
1287 DEBUG_PRINT2 (" slots available: %ld\n", \
1288 (long) REMAINING_AVAIL_SLOTS); \
1291 /* Push the info, starting with the registers. */ \
1292 DEBUG_PRINT1 ("\n"); \
1294 for (this_reg = lowest_active_reg; this_reg <= highest_active_reg; \
1297 DEBUG_PRINT2 (" Pushing reg: %d\n", this_reg); \
1298 DEBUG_STATEMENT (num_regs_pushed++); \
1300 DEBUG_PRINT2 (" start: 0x%lx\n", (long) regstart[this_reg]); \
1301 PUSH_FAILURE_POINTER (regstart[this_reg]); \
1303 DEBUG_PRINT2 (" end: 0x%lx\n", (long) regend[this_reg]); \
1304 PUSH_FAILURE_POINTER (regend[this_reg]); \
1306 DEBUG_PRINT2 (" info: 0x%lx\n ", \
1307 * (long *) (®_info[this_reg])); \
1308 DEBUG_PRINT2 (" match_null=%d", \
1309 REG_MATCH_NULL_STRING_P (reg_info[this_reg])); \
1310 DEBUG_PRINT2 (" active=%d", IS_ACTIVE (reg_info[this_reg])); \
1311 DEBUG_PRINT2 (" matched_something=%d", \
1312 MATCHED_SOMETHING (reg_info[this_reg])); \
1313 DEBUG_PRINT2 (" ever_matched_something=%d", \
1314 EVER_MATCHED_SOMETHING (reg_info[this_reg])); \
1315 DEBUG_PRINT1 ("\n"); \
1316 PUSH_FAILURE_ELT (reg_info[this_reg].word); \
1319 DEBUG_PRINT2 (" Pushing low active reg: %d\n", lowest_active_reg); \
1320 PUSH_FAILURE_INT (lowest_active_reg); \
1322 DEBUG_PRINT2 (" Pushing high active reg: %d\n", highest_active_reg); \
1323 PUSH_FAILURE_INT (highest_active_reg); \
1325 DEBUG_PRINT2 (" Pushing pattern 0x%lx: \n", (long) pattern_place); \
1326 DEBUG_PRINT_COMPILED_PATTERN (bufp, pattern_place, pend); \
1327 PUSH_FAILURE_POINTER (pattern_place); \
1329 DEBUG_PRINT2 (" Pushing string 0x%lx: `", (long) string_place); \
1330 DEBUG_PRINT_DOUBLE_STRING (string_place, string1, size1, string2, \
1332 DEBUG_PRINT1 ("'\n"); \
1333 PUSH_FAILURE_POINTER (string_place); \
1335 DEBUG_PRINT2 (" Pushing failure id: %u\n", failure_id); \
1336 DEBUG_PUSH (failure_id); \
1339 /* This is the number of items that are pushed and popped on the stack
1340 for each register. */
1341 #define NUM_REG_ITEMS 3
1343 /* Individual items aside from the registers. */
1345 #define NUM_NONREG_ITEMS 5 /* Includes failure point id. */
1347 #define NUM_NONREG_ITEMS 4
1350 /* We push at most this many items on the stack. */
1351 /* We used to use (num_regs - 1), which is the number of registers
1352 this regexp will save; but that was changed to 5
1353 to avoid stack overflow for a regexp with lots of parens. */
1354 #define MAX_FAILURE_ITEMS (5 * NUM_REG_ITEMS + NUM_NONREG_ITEMS)
1356 /* We actually push this many items. */
1357 #define NUM_FAILURE_ITEMS \
1358 ((highest_active_reg - lowest_active_reg + 1) * NUM_REG_ITEMS \
1361 /* How many items can still be added to the stack without overflowing it. */
1362 #define REMAINING_AVAIL_SLOTS ((fail_stack).size - (fail_stack).avail)
1365 /* Pops what PUSH_FAIL_STACK pushes.
1367 We restore into the parameters, all of which should be lvalues:
1368 STR -- the saved data position.
1369 PAT -- the saved pattern position.
1370 LOW_REG, HIGH_REG -- the highest and lowest active registers.
1371 REGSTART, REGEND -- arrays of string positions.
1372 REG_INFO -- array of information about each subexpression.
1374 Also assumes the variables `fail_stack' and (if debugging), `bufp',
1375 `pend', `string1', `size1', `string2', and `size2'. */
1377 #define POP_FAILURE_POINT(str, pat, low_reg, high_reg, \
1378 regstart, regend, reg_info) \
1380 DEBUG_STATEMENT (fail_stack_elt_t ffailure_id;) \
1382 const unsigned char *string_temp; \
1384 assert (!FAIL_STACK_EMPTY ()); \
1386 /* Remove failure points and point to how many regs pushed. */ \
1387 DEBUG_PRINT1 ("POP_FAILURE_POINT:\n"); \
1388 DEBUG_PRINT2 (" Before pop, next avail: %lu\n", \
1389 (unsigned long) fail_stack.avail); \
1390 DEBUG_PRINT2 (" size: %lu\n", \
1391 (unsigned long) fail_stack.size); \
1393 assert (fail_stack.avail >= NUM_NONREG_ITEMS); \
1395 DEBUG_POP (&ffailure_id.integer); \
1396 DEBUG_PRINT2 (" Popping failure id: %u\n", \
1397 * (unsigned int *) &ffailure_id); \
1399 /* If the saved string location is NULL, it came from an \
1400 on_failure_keep_string_jump opcode, and we want to throw away the \
1401 saved NULL, thus retaining our current position in the string. */ \
1402 string_temp = POP_FAILURE_POINTER (); \
1403 if (string_temp != NULL) \
1404 str = string_temp; \
1406 DEBUG_PRINT2 (" Popping string 0x%lx: `", (long) str); \
1407 DEBUG_PRINT_DOUBLE_STRING (str, string1, size1, string2, size2); \
1408 DEBUG_PRINT1 ("'\n"); \
1410 pat = (unsigned char *) POP_FAILURE_POINTER (); \
1411 DEBUG_PRINT2 (" Popping pattern 0x%lx: ", (long) pat); \
1412 DEBUG_PRINT_COMPILED_PATTERN (bufp, pat, pend); \
1414 /* Restore register info. */ \
1415 high_reg = (unsigned) POP_FAILURE_INT (); \
1416 DEBUG_PRINT2 (" Popping high active reg: %d\n", high_reg); \
1418 low_reg = (unsigned) POP_FAILURE_INT (); \
1419 DEBUG_PRINT2 (" Popping low active reg: %d\n", low_reg); \
1421 for (this_reg = high_reg; this_reg >= low_reg; this_reg--) \
1423 DEBUG_PRINT2 (" Popping reg: %d\n", this_reg); \
1425 reg_info[this_reg].word = POP_FAILURE_ELT (); \
1426 DEBUG_PRINT2 (" info: 0x%lx\n", \
1427 * (long *) ®_info[this_reg]); \
1429 regend[this_reg] = POP_FAILURE_POINTER (); \
1430 DEBUG_PRINT2 (" end: 0x%lx\n", (long) regend[this_reg]); \
1432 regstart[this_reg] = POP_FAILURE_POINTER (); \
1433 DEBUG_PRINT2 (" start: 0x%lx\n", (long) regstart[this_reg]); \
1436 set_regs_matched_done = 0; \
1437 DEBUG_STATEMENT (nfailure_points_popped++); \
1438 } while (0) /* POP_FAILURE_POINT */
1442 /* Structure for per-register (a.k.a. per-group) information.
1443 Other register information, such as the
1444 starting and ending positions (which are addresses), and the list of
1445 inner groups (which is a bits list) are maintained in separate
1448 We are making a (strictly speaking) nonportable assumption here: that
1449 the compiler will pack our bit fields into something that fits into
1450 the type of `word', i.e., is something that fits into one item on the
1455 fail_stack_elt_t word;
1458 /* This field is one if this group can match the empty string,
1459 zero if not. If not yet determined, `MATCH_NULL_UNSET_VALUE'. */
1460 #define MATCH_NULL_UNSET_VALUE 3
1461 unsigned match_null_string_p : 2;
1462 unsigned is_active : 1;
1463 unsigned matched_something : 1;
1464 unsigned ever_matched_something : 1;
1466 } register_info_type;
1468 #define REG_MATCH_NULL_STRING_P(R) ((R).bits.match_null_string_p)
1469 #define IS_ACTIVE(R) ((R).bits.is_active)
1470 #define MATCHED_SOMETHING(R) ((R).bits.matched_something)
1471 #define EVER_MATCHED_SOMETHING(R) ((R).bits.ever_matched_something)
1474 /* Call this when have matched a real character; it sets `matched' flags
1475 for the subexpressions which we are currently inside. Also records
1476 that those subexprs have matched. */
1477 #define SET_REGS_MATCHED() \
1480 if (!set_regs_matched_done) \
1483 set_regs_matched_done = 1; \
1484 for (r = lowest_active_reg; r <= highest_active_reg; r++) \
1486 MATCHED_SOMETHING (reg_info[r]) \
1487 = EVER_MATCHED_SOMETHING (reg_info[r]) \
1494 /* Registers are set to a sentinel when they haven't yet matched. */
1495 static unsigned char reg_unset_dummy;
1496 #define REG_UNSET_VALUE (®_unset_dummy)
1497 #define REG_UNSET(e) ((e) == REG_UNSET_VALUE)
1499 /* Subroutine declarations and macros for regex_compile. */
1501 /* Fetch the next character in the uncompiled pattern---translating it
1502 if necessary. Also cast from a signed character in the constant
1503 string passed to us by the user to an unsigned char that we can use
1504 as an array index (in, e.g., `translate'). */
1505 #define PATFETCH(c) \
1508 c = TRANSLATE (c); \
1511 /* Fetch the next character in the uncompiled pattern, with no
1513 #define PATFETCH_RAW(c) \
1514 do {if (p == pend) return REG_EEND; \
1515 assert (p < pend); \
1516 c = charptr_emchar (p); \
1520 /* Go backwards one character in the pattern. */
1521 #define PATUNFETCH DEC_CHARPTR (p)
1525 #define PATFETCH_EXTENDED(emch) \
1526 do {if (p == pend) return REG_EEND; \
1527 assert (p < pend); \
1528 emch = charptr_emchar ((const Bufbyte *) p); \
1530 if (TRANSLATE_P (translate) && emch < 0x80) \
1531 emch = (Emchar) (unsigned char) RE_TRANSLATE (emch); \
1534 #define PATFETCH_RAW_EXTENDED(emch) \
1535 do {if (p == pend) return REG_EEND; \
1536 assert (p < pend); \
1537 emch = charptr_emchar ((const Bufbyte *) p); \
1541 #define PATUNFETCH_EXTENDED DEC_CHARPTR (p)
1543 #define PATFETCH_EITHER(emch) \
1545 if (has_extended_chars) \
1546 PATFETCH_EXTENDED (emch); \
1551 #define PATFETCH_RAW_EITHER(emch) \
1553 if (has_extended_chars) \
1554 PATFETCH_RAW_EXTENDED (emch); \
1556 PATFETCH_RAW (emch); \
1559 #define PATUNFETCH_EITHER \
1561 if (has_extended_chars) \
1562 PATUNFETCH_EXTENDED (emch); \
1564 PATUNFETCH (emch); \
1567 #else /* not MULE */
1569 #define PATFETCH_EITHER(emch) PATFETCH (emch)
1570 #define PATFETCH_RAW_EITHER(emch) PATFETCH_RAW (emch)
1571 #define PATUNFETCH_EITHER PATUNFETCH
1575 /* If `translate' is non-null, return translate[D], else just D. We
1576 cast the subscript to translate because some data is declared as
1577 `char *', to avoid warnings when a string constant is passed. But
1578 when we use a character as a subscript we must make it unsigned. */
1579 #define TRANSLATE(d) (TRANSLATE_P (translate) ? RE_TRANSLATE (d) : (d))
1583 #define TRANSLATE_EXTENDED_UNSAFE(emch) \
1584 (TRANSLATE_P (translate) && emch < 0x80 ? RE_TRANSLATE (emch) : (emch))
1588 /* Macros for outputting the compiled pattern into `buffer'. */
1590 /* If the buffer isn't allocated when it comes in, use this. */
1591 #define INIT_BUF_SIZE 32
1593 /* Make sure we have at least N more bytes of space in buffer. */
1594 #define GET_BUFFER_SPACE(n) \
1595 while (buf_end - bufp->buffer + (n) > bufp->allocated) \
1598 /* Make sure we have one more byte of buffer space and then add C to it. */
1599 #define BUF_PUSH(c) \
1601 GET_BUFFER_SPACE (1); \
1602 *buf_end++ = (unsigned char) (c); \
1606 /* Ensure we have two more bytes of buffer space and then append C1 and C2. */
1607 #define BUF_PUSH_2(c1, c2) \
1609 GET_BUFFER_SPACE (2); \
1610 *buf_end++ = (unsigned char) (c1); \
1611 *buf_end++ = (unsigned char) (c2); \
1615 /* As with BUF_PUSH_2, except for three bytes. */
1616 #define BUF_PUSH_3(c1, c2, c3) \
1618 GET_BUFFER_SPACE (3); \
1619 *buf_end++ = (unsigned char) (c1); \
1620 *buf_end++ = (unsigned char) (c2); \
1621 *buf_end++ = (unsigned char) (c3); \
1625 /* Store a jump with opcode OP at LOC to location TO. We store a
1626 relative address offset by the three bytes the jump itself occupies. */
1627 #define STORE_JUMP(op, loc, to) \
1628 store_op1 (op, loc, (to) - (loc) - 3)
1630 /* Likewise, for a two-argument jump. */
1631 #define STORE_JUMP2(op, loc, to, arg) \
1632 store_op2 (op, loc, (to) - (loc) - 3, arg)
1634 /* Like `STORE_JUMP', but for inserting. Assume `buf_end' is the
1636 #define INSERT_JUMP(op, loc, to) \
1637 insert_op1 (op, loc, (to) - (loc) - 3, buf_end)
1639 /* Like `STORE_JUMP2', but for inserting. Assume `buf_end' is the
1641 #define INSERT_JUMP2(op, loc, to, arg) \
1642 insert_op2 (op, loc, (to) - (loc) - 3, arg, buf_end)
1645 /* This is not an arbitrary limit: the arguments which represent offsets
1646 into the pattern are two bytes long. So if 2^16 bytes turns out to
1647 be too small, many things would have to change. */
1648 #define MAX_BUF_SIZE (1L << 16)
1651 /* Extend the buffer by twice its current size via realloc and
1652 reset the pointers that pointed into the old block to point to the
1653 correct places in the new one. If extending the buffer results in it
1654 being larger than MAX_BUF_SIZE, then flag memory exhausted. */
1655 #define EXTEND_BUFFER() \
1657 re_char *old_buffer = bufp->buffer; \
1658 if (bufp->allocated == MAX_BUF_SIZE) \
1660 bufp->allocated <<= 1; \
1661 if (bufp->allocated > MAX_BUF_SIZE) \
1662 bufp->allocated = MAX_BUF_SIZE; \
1663 bufp->buffer = (unsigned char *) realloc (bufp->buffer, bufp->allocated);\
1664 if (bufp->buffer == NULL) \
1665 return REG_ESPACE; \
1666 /* If the buffer moved, move all the pointers into it. */ \
1667 if (old_buffer != bufp->buffer) \
1669 buf_end = (buf_end - old_buffer) + bufp->buffer; \
1670 begalt = (begalt - old_buffer) + bufp->buffer; \
1671 if (fixup_alt_jump) \
1672 fixup_alt_jump = (fixup_alt_jump - old_buffer) + bufp->buffer;\
1674 laststart = (laststart - old_buffer) + bufp->buffer; \
1675 if (pending_exact) \
1676 pending_exact = (pending_exact - old_buffer) + bufp->buffer; \
1681 /* Since we have one byte reserved for the register number argument to
1682 {start,stop}_memory, the maximum number of groups we can report
1683 things about is what fits in that byte. */
1684 #define MAX_REGNUM 255
1686 /* But patterns can have more than `MAX_REGNUM' registers. We just
1687 ignore the excess. */
1688 typedef unsigned regnum_t;
1691 /* Macros for the compile stack. */
1693 /* Since offsets can go either forwards or backwards, this type needs to
1694 be able to hold values from -(MAX_BUF_SIZE - 1) to MAX_BUF_SIZE - 1. */
1695 typedef int pattern_offset_t;
1699 pattern_offset_t begalt_offset;
1700 pattern_offset_t fixup_alt_jump;
1701 pattern_offset_t inner_group_offset;
1702 pattern_offset_t laststart_offset;
1704 } compile_stack_elt_t;
1709 compile_stack_elt_t *stack;
1711 unsigned avail; /* Offset of next open position. */
1712 } compile_stack_type;
1715 #define INIT_COMPILE_STACK_SIZE 32
1717 #define COMPILE_STACK_EMPTY (compile_stack.avail == 0)
1718 #define COMPILE_STACK_FULL (compile_stack.avail == compile_stack.size)
1720 /* The next available element. */
1721 #define COMPILE_STACK_TOP (compile_stack.stack[compile_stack.avail])
1724 /* Set the bit for character C in a bit vector. */
1725 #define SET_LIST_BIT(c) \
1726 (buf_end[((unsigned char) (c)) / BYTEWIDTH] \
1727 |= 1 << (((unsigned char) c) % BYTEWIDTH))
1731 /* Set the "bit" for character C in a range table. */
1732 #define SET_RANGETAB_BIT(c) put_range_table (rtab, c, c, Qt)
1734 /* Set the "bit" for character c in the appropriate table. */
1735 #define SET_EITHER_BIT(c) \
1737 if (has_extended_chars) \
1738 SET_RANGETAB_BIT (c); \
1743 #else /* not MULE */
1745 #define SET_EITHER_BIT(c) SET_LIST_BIT (c)
1750 /* Get the next unsigned number in the uncompiled pattern. */
1751 #define GET_UNSIGNED_NUMBER(num) \
1755 while (ISDIGIT (c)) \
1759 num = num * 10 + c - '0'; \
1767 #define CHAR_CLASS_MAX_LENGTH 6 /* Namely, `xdigit'. */
1769 #define IS_CHAR_CLASS(string) \
1770 (STREQ (string, "alpha") || STREQ (string, "upper") \
1771 || STREQ (string, "lower") || STREQ (string, "digit") \
1772 || STREQ (string, "alnum") || STREQ (string, "xdigit") \
1773 || STREQ (string, "space") || STREQ (string, "print") \
1774 || STREQ (string, "punct") || STREQ (string, "graph") \
1775 || STREQ (string, "cntrl") || STREQ (string, "blank"))
1777 static void store_op1 (re_opcode_t op, unsigned char *loc, int arg);
1778 static void store_op2 (re_opcode_t op, unsigned char *loc, int arg1, int arg2);
1779 static void insert_op1 (re_opcode_t op, unsigned char *loc, int arg,
1780 unsigned char *end);
1781 static void insert_op2 (re_opcode_t op, unsigned char *loc, int arg1, int arg2,
1782 unsigned char *end);
1783 static boolean at_begline_loc_p (re_char *pattern, re_char *p,
1784 reg_syntax_t syntax);
1785 static boolean at_endline_loc_p (re_char *p, re_char *pend, int syntax);
1786 static boolean group_in_compile_stack (compile_stack_type compile_stack,
1788 static reg_errcode_t compile_range (re_char **p_ptr, re_char *pend,
1789 RE_TRANSLATE_TYPE translate,
1790 reg_syntax_t syntax,
1793 static reg_errcode_t compile_extended_range (re_char **p_ptr,
1795 RE_TRANSLATE_TYPE translate,
1796 reg_syntax_t syntax,
1799 static boolean group_match_null_string_p (unsigned char **p,
1801 register_info_type *reg_info);
1802 static boolean alt_match_null_string_p (unsigned char *p, unsigned char *end,
1803 register_info_type *reg_info);
1804 static boolean common_op_match_null_string_p (unsigned char **p,
1806 register_info_type *reg_info);
1807 static int bcmp_translate (const unsigned char *s1, const unsigned char *s2,
1808 REGISTER int len, RE_TRANSLATE_TYPE translate);
1809 static int re_match_2_internal (struct re_pattern_buffer *bufp,
1810 re_char *string1, int size1,
1811 re_char *string2, int size2, int pos,
1812 struct re_registers *regs, int stop);
1814 #ifndef MATCH_MAY_ALLOCATE
1816 /* If we cannot allocate large objects within re_match_2_internal,
1817 we make the fail stack and register vectors global.
1818 The fail stack, we grow to the maximum size when a regexp
1820 The register vectors, we adjust in size each time we
1821 compile a regexp, according to the number of registers it needs. */
1823 static fail_stack_type fail_stack;
1825 /* Size with which the following vectors are currently allocated.
1826 That is so we can make them bigger as needed,
1827 but never make them smaller. */
1828 static int regs_allocated_size;
1830 static re_char ** regstart, ** regend;
1831 static re_char ** old_regstart, ** old_regend;
1832 static re_char **best_regstart, **best_regend;
1833 static register_info_type *reg_info;
1834 static re_char **reg_dummy;
1835 static register_info_type *reg_info_dummy;
1837 /* Make the register vectors big enough for NUM_REGS registers,
1838 but don't make them smaller. */
1841 regex_grow_registers (int num_regs)
1843 if (num_regs > regs_allocated_size)
1845 RETALLOC_IF (regstart, num_regs, re_char *);
1846 RETALLOC_IF (regend, num_regs, re_char *);
1847 RETALLOC_IF (old_regstart, num_regs, re_char *);
1848 RETALLOC_IF (old_regend, num_regs, re_char *);
1849 RETALLOC_IF (best_regstart, num_regs, re_char *);
1850 RETALLOC_IF (best_regend, num_regs, re_char *);
1851 RETALLOC_IF (reg_info, num_regs, register_info_type);
1852 RETALLOC_IF (reg_dummy, num_regs, re_char *);
1853 RETALLOC_IF (reg_info_dummy, num_regs, register_info_type);
1855 regs_allocated_size = num_regs;
1859 #endif /* not MATCH_MAY_ALLOCATE */
1861 /* `regex_compile' compiles PATTERN (of length SIZE) according to SYNTAX.
1862 Returns one of error codes defined in `regex.h', or zero for success.
1864 Assumes the `allocated' (and perhaps `buffer') and `translate'
1865 fields are set in BUFP on entry.
1867 If it succeeds, results are put in BUFP (if it returns an error, the
1868 contents of BUFP are undefined):
1869 `buffer' is the compiled pattern;
1870 `syntax' is set to SYNTAX;
1871 `used' is set to the length of the compiled pattern;
1872 `fastmap_accurate' is zero;
1873 `re_nsub' is the number of subexpressions in PATTERN;
1874 `not_bol' and `not_eol' are zero;
1876 The `fastmap' and `newline_anchor' fields are neither
1877 examined nor set. */
1879 /* Return, freeing storage we allocated. */
1880 #define FREE_STACK_RETURN(value) \
1881 return (free (compile_stack.stack), value)
1883 static reg_errcode_t
1884 regex_compile (re_char *pattern, int size, reg_syntax_t syntax,
1885 struct re_pattern_buffer *bufp)
1887 /* We fetch characters from PATTERN here. We declare these as int
1888 (or possibly long) so that chars above 127 can be used as
1889 array indices. The macros that fetch a character from the pattern
1890 make sure to coerce to unsigned char before assigning, so we won't
1891 get bitten by negative numbers here. */
1892 /* XEmacs change: used to be unsigned char. */
1893 REGISTER EMACS_INT c, c1;
1895 /* A random temporary spot in PATTERN. */
1898 /* Points to the end of the buffer, where we should append. */
1899 REGISTER unsigned char *buf_end;
1901 /* Keeps track of unclosed groups. */
1902 compile_stack_type compile_stack;
1904 /* Points to the current (ending) position in the pattern. */
1905 re_char *p = pattern;
1906 re_char *pend = pattern + size;
1908 /* How to translate the characters in the pattern. */
1909 RE_TRANSLATE_TYPE translate = bufp->translate;
1911 /* Address of the count-byte of the most recently inserted `exactn'
1912 command. This makes it possible to tell if a new exact-match
1913 character can be added to that command or if the character requires
1914 a new `exactn' command. */
1915 unsigned char *pending_exact = 0;
1917 /* Address of start of the most recently finished expression.
1918 This tells, e.g., postfix * where to find the start of its
1919 operand. Reset at the beginning of groups and alternatives. */
1920 unsigned char *laststart = 0;
1922 /* Address of beginning of regexp, or inside of last group. */
1923 unsigned char *begalt;
1925 /* Place in the uncompiled pattern (i.e., the {) to
1926 which to go back if the interval is invalid. */
1927 re_char *beg_interval;
1929 /* Address of the place where a forward jump should go to the end of
1930 the containing expression. Each alternative of an `or' -- except the
1931 last -- ends with a forward jump of this sort. */
1932 unsigned char *fixup_alt_jump = 0;
1934 /* Counts open-groups as they are encountered. Remembered for the
1935 matching close-group on the compile stack, so the same register
1936 number is put in the stop_memory as the start_memory. */
1937 regnum_t regnum = 0;
1940 DEBUG_PRINT1 ("\nCompiling pattern: ");
1943 unsigned debug_count;
1945 for (debug_count = 0; debug_count < size; debug_count++)
1946 putchar (pattern[debug_count]);
1951 /* Initialize the compile stack. */
1952 compile_stack.stack = TALLOC (INIT_COMPILE_STACK_SIZE, compile_stack_elt_t);
1953 if (compile_stack.stack == NULL)
1956 compile_stack.size = INIT_COMPILE_STACK_SIZE;
1957 compile_stack.avail = 0;
1959 /* Initialize the pattern buffer. */
1960 bufp->syntax = syntax;
1961 bufp->fastmap_accurate = 0;
1962 bufp->not_bol = bufp->not_eol = 0;
1964 /* Set `used' to zero, so that if we return an error, the pattern
1965 printer (for debugging) will think there's no pattern. We reset it
1969 /* Always count groups, whether or not bufp->no_sub is set. */
1972 #if !defined (emacs) && !defined (SYNTAX_TABLE)
1973 /* Initialize the syntax table. */
1974 init_syntax_once ();
1977 if (bufp->allocated == 0)
1980 { /* If zero allocated, but buffer is non-null, try to realloc
1981 enough space. This loses if buffer's address is bogus, but
1982 that is the user's responsibility. */
1983 RETALLOC (bufp->buffer, INIT_BUF_SIZE, unsigned char);
1986 { /* Caller did not allocate a buffer. Do it for them. */
1987 bufp->buffer = TALLOC (INIT_BUF_SIZE, unsigned char);
1989 if (!bufp->buffer) FREE_STACK_RETURN (REG_ESPACE);
1991 bufp->allocated = INIT_BUF_SIZE;
1994 begalt = buf_end = bufp->buffer;
1996 /* Loop through the uncompiled pattern until we're at the end. */
2005 if ( /* If at start of pattern, it's an operator. */
2007 /* If context independent, it's an operator. */
2008 || syntax & RE_CONTEXT_INDEP_ANCHORS
2009 /* Otherwise, depends on what's come before. */
2010 || at_begline_loc_p (pattern, p, syntax))
2020 if ( /* If at end of pattern, it's an operator. */
2022 /* If context independent, it's an operator. */
2023 || syntax & RE_CONTEXT_INDEP_ANCHORS
2024 /* Otherwise, depends on what's next. */
2025 || at_endline_loc_p (p, pend, syntax))
2035 if ((syntax & RE_BK_PLUS_QM)
2036 || (syntax & RE_LIMITED_OPS))
2040 /* If there is no previous pattern... */
2043 if (syntax & RE_CONTEXT_INVALID_OPS)
2044 FREE_STACK_RETURN (REG_BADRPT);
2045 else if (!(syntax & RE_CONTEXT_INDEP_OPS))
2050 /* true means zero/many matches are allowed. */
2051 boolean zero_times_ok = c != '+';
2052 boolean many_times_ok = c != '?';
2054 /* true means match shortest string possible. */
2055 boolean minimal = false;
2057 /* If there is a sequence of repetition chars, collapse it
2058 down to just one (the right one). We can't combine
2059 interval operators with these because of, e.g., `a{2}*',
2060 which should only match an even number of `a's. */
2065 if (c == '*' || (!(syntax & RE_BK_PLUS_QM)
2066 && (c == '+' || c == '?')))
2069 else if (syntax & RE_BK_PLUS_QM && c == '\\')
2071 if (p == pend) FREE_STACK_RETURN (REG_EESCAPE);
2074 if (!(c1 == '+' || c1 == '?'))
2089 /* If we get here, we found another repeat character. */
2090 if (!(syntax & RE_NO_MINIMAL_MATCHING))
2092 /* "*?" and "+?" and "??" are okay (and mean match
2093 minimally), but other sequences (such as "*??" and
2094 "+++") are rejected (reserved for future use). */
2095 if (minimal || c != '?')
2096 FREE_STACK_RETURN (REG_BADRPT);
2101 zero_times_ok |= c != '+';
2102 many_times_ok |= c != '?';
2106 /* Star, etc. applied to an empty pattern is equivalent
2107 to an empty pattern. */
2111 /* Now we know whether zero matches is allowed
2112 and whether two or more matches is allowed
2113 and whether we want minimal or maximal matching. */
2119 0: /on_failure_jump to 6
2124 GET_BUFFER_SPACE (6);
2125 INSERT_JUMP (jump, laststart, buf_end + 3);
2127 INSERT_JUMP (on_failure_jump, laststart, laststart + 6);
2130 else if (zero_times_ok)
2135 6: /on_failure_jump to 3
2138 GET_BUFFER_SPACE (6);
2139 INSERT_JUMP (jump, laststart, buf_end + 3);
2141 STORE_JUMP (on_failure_jump, buf_end, laststart + 3);
2148 3: /on_failure_jump to 0
2151 GET_BUFFER_SPACE (3);
2152 STORE_JUMP (on_failure_jump, buf_end, laststart);
2158 /* Are we optimizing this jump? */
2159 boolean keep_string_p = false;
2162 { /* More than one repetition is allowed, so put in
2163 at the end a backward relative jump from
2164 `buf_end' to before the next jump we're going
2165 to put in below (which jumps from laststart to
2168 But if we are at the `*' in the exact sequence `.*\n',
2169 insert an unconditional jump backwards to the .,
2170 instead of the beginning of the loop. This way we only
2171 push a failure point once, instead of every time
2172 through the loop. */
2173 assert (p - 1 > pattern);
2175 /* Allocate the space for the jump. */
2176 GET_BUFFER_SPACE (3);
2178 /* We know we are not at the first character of the
2179 pattern, because laststart was nonzero. And we've
2180 already incremented `p', by the way, to be the
2181 character after the `*'. Do we have to do something
2182 analogous here for null bytes, because of
2186 && p < pend && *p == '\n'
2187 && !(syntax & RE_DOT_NEWLINE))
2188 { /* We have .*\n. */
2189 STORE_JUMP (jump, buf_end, laststart);
2190 keep_string_p = true;
2193 /* Anything else. */
2194 STORE_JUMP (maybe_pop_jump, buf_end, laststart - 3);
2196 /* We've added more stuff to the buffer. */
2200 /* On failure, jump from laststart to buf_end + 3,
2201 which will be the end of the buffer after this jump
2203 GET_BUFFER_SPACE (3);
2204 INSERT_JUMP (keep_string_p ? on_failure_keep_string_jump
2206 laststart, buf_end + 3);
2211 /* At least one repetition is required, so insert a
2212 `dummy_failure_jump' before the initial
2213 `on_failure_jump' instruction of the loop. This
2214 effects a skip over that instruction the first time
2215 we hit that loop. */
2216 GET_BUFFER_SPACE (3);
2217 INSERT_JUMP (dummy_failure_jump, laststart, laststart + 6);
2227 laststart = buf_end;
2234 /* XEmacs change: this whole section */
2235 boolean had_char_class = false;
2237 boolean has_extended_chars = false;
2238 REGISTER Lisp_Object rtab = Qnil;
2241 if (p == pend) FREE_STACK_RETURN (REG_EBRACK);
2243 /* Ensure that we have enough space to push a charset: the
2244 opcode, the length count, and the bitset; 34 bytes in all. */
2245 GET_BUFFER_SPACE (34);
2247 laststart = buf_end;
2249 /* We test `*p == '^' twice, instead of using an if
2250 statement, so we only need one BUF_PUSH. */
2251 BUF_PUSH (*p == '^' ? charset_not : charset);
2255 /* Remember the first position in the bracket expression. */
2258 /* Push the number of bytes in the bitmap. */
2259 BUF_PUSH ((1 << BYTEWIDTH) / BYTEWIDTH);
2261 /* Clear the whole map. */
2262 memset (buf_end, 0, (1 << BYTEWIDTH) / BYTEWIDTH);
2264 /* charset_not matches newline according to a syntax bit. */
2265 if ((re_opcode_t) buf_end[-2] == charset_not
2266 && (syntax & RE_HAT_LISTS_NOT_NEWLINE))
2267 SET_LIST_BIT ('\n');
2270 start_over_with_extended:
2271 if (has_extended_chars)
2273 /* There are extended chars here, which means we need to start
2274 over and shift to unified range-table format. */
2275 if (buf_end[-2] == charset)
2276 buf_end[-2] = charset_mule;
2278 buf_end[-2] = charset_mule_not;
2280 p = p1; /* go back to the beginning of the charset, after
2282 rtab = Vthe_lisp_rangetab;
2283 Fclear_range_table (rtab);
2285 /* charset_not matches newline according to a syntax bit. */
2286 if ((re_opcode_t) buf_end[-1] == charset_mule_not
2287 && (syntax & RE_HAT_LISTS_NOT_NEWLINE))
2288 SET_EITHER_BIT ('\n');
2292 /* Read in characters and ranges, setting map bits. */
2295 if (p == pend) FREE_STACK_RETURN (REG_EBRACK);
2300 if (c >= 0x80 && !has_extended_chars)
2302 has_extended_chars = 1;
2303 /* Frumble-bumble, we've found some extended chars.
2304 Need to start over, process everything using
2305 the general extended-char mechanism, and need
2306 to use charset_mule and charset_mule_not instead
2307 of charset and charset_not. */
2308 goto start_over_with_extended;
2311 /* \ might escape characters inside [...] and [^...]. */
2312 if ((syntax & RE_BACKSLASH_ESCAPE_IN_LISTS) && c == '\\')
2314 if (p == pend) FREE_STACK_RETURN (REG_EESCAPE);
2318 if (c1 >= 0x80 && !has_extended_chars)
2320 has_extended_chars = 1;
2321 goto start_over_with_extended;
2324 SET_EITHER_BIT (c1);
2328 /* Could be the end of the bracket expression. If it's
2329 not (i.e., when the bracket expression is `[]' so
2330 far), the ']' character bit gets set way below. */
2331 if (c == ']' && p != p1 + 1)
2334 /* Look ahead to see if it's a range when the last thing
2335 was a character class. */
2336 if (had_char_class && c == '-' && *p != ']')
2337 FREE_STACK_RETURN (REG_ERANGE);
2339 /* Look ahead to see if it's a range when the last thing
2340 was a character: if this is a hyphen not at the
2341 beginning or the end of a list, then it's the range
2344 && !(p - 2 >= pattern && p[-2] == '[')
2345 && !(p - 3 >= pattern && p[-3] == '[' && p[-2] == '^')
2351 if (* (unsigned char *) p >= 0x80 && !has_extended_chars)
2353 has_extended_chars = 1;
2354 goto start_over_with_extended;
2356 if (has_extended_chars)
2357 ret = compile_extended_range (&p, pend, translate,
2361 ret = compile_range (&p, pend, translate, syntax, buf_end);
2362 if (ret != REG_NOERROR) FREE_STACK_RETURN (ret);
2365 else if (p[0] == '-' && p[1] != ']')
2366 { /* This handles ranges made up of characters only. */
2369 /* Move past the `-'. */
2373 if (* (unsigned char *) p >= 0x80 && !has_extended_chars)
2375 has_extended_chars = 1;
2376 goto start_over_with_extended;
2378 if (has_extended_chars)
2379 ret = compile_extended_range (&p, pend, translate,
2383 ret = compile_range (&p, pend, translate, syntax, buf_end);
2384 if (ret != REG_NOERROR) FREE_STACK_RETURN (ret);
2387 /* See if we're at the beginning of a possible character
2390 else if (syntax & RE_CHAR_CLASSES && c == '[' && *p == ':')
2391 { /* Leave room for the null. */
2392 char str[CHAR_CLASS_MAX_LENGTH + 1];
2397 /* If pattern is `[[:'. */
2398 if (p == pend) FREE_STACK_RETURN (REG_EBRACK);
2402 /* #### This code is unused.
2403 Correctness is not checked after TRT
2406 if (c == ':' || c == ']' || p == pend
2407 || c1 == CHAR_CLASS_MAX_LENGTH)
2409 str[c1++] = (char) c;
2413 /* If isn't a word bracketed by `[:' and `:]':
2414 undo the ending character, the letters, and leave
2415 the leading `:' and `[' (but set bits for them). */
2416 if (c == ':' && *p == ']')
2419 boolean is_alnum = STREQ (str, "alnum");
2420 boolean is_alpha = STREQ (str, "alpha");
2421 boolean is_blank = STREQ (str, "blank");
2422 boolean is_cntrl = STREQ (str, "cntrl");
2423 boolean is_digit = STREQ (str, "digit");
2424 boolean is_graph = STREQ (str, "graph");
2425 boolean is_lower = STREQ (str, "lower");
2426 boolean is_print = STREQ (str, "print");
2427 boolean is_punct = STREQ (str, "punct");
2428 boolean is_space = STREQ (str, "space");
2429 boolean is_upper = STREQ (str, "upper");
2430 boolean is_xdigit = STREQ (str, "xdigit");
2432 if (!IS_CHAR_CLASS (str))
2433 FREE_STACK_RETURN (REG_ECTYPE);
2435 /* Throw away the ] at the end of the character
2439 if (p == pend) FREE_STACK_RETURN (REG_EBRACK);
2441 for (ch = 0; ch < 1 << BYTEWIDTH; ch++)
2443 /* This was split into 3 if's to
2444 avoid an arbitrary limit in some compiler. */
2445 if ( (is_alnum && ISALNUM (ch))
2446 || (is_alpha && ISALPHA (ch))
2447 || (is_blank && ISBLANK (ch))
2448 || (is_cntrl && ISCNTRL (ch)))
2449 SET_EITHER_BIT (ch);
2450 if ( (is_digit && ISDIGIT (ch))
2451 || (is_graph && ISGRAPH (ch))
2452 || (is_lower && ISLOWER (ch))
2453 || (is_print && ISPRINT (ch)))
2454 SET_EITHER_BIT (ch);
2455 if ( (is_punct && ISPUNCT (ch))
2456 || (is_space && ISSPACE (ch))
2457 || (is_upper && ISUPPER (ch))
2458 || (is_xdigit && ISXDIGIT (ch)))
2459 SET_EITHER_BIT (ch);
2461 had_char_class = true;
2468 SET_EITHER_BIT ('[');
2469 SET_EITHER_BIT (':');
2470 had_char_class = false;
2475 had_char_class = false;
2481 if (has_extended_chars)
2483 /* We have a range table, not a bit vector. */
2485 unified_range_table_bytes_needed (rtab);
2486 GET_BUFFER_SPACE (bytes_needed);
2487 unified_range_table_copy_data (rtab, buf_end);
2488 buf_end += unified_range_table_bytes_used (buf_end);
2492 /* Discard any (non)matching list bytes that are all 0 at the
2493 end of the map. Decrease the map-length byte too. */
2494 while ((int) buf_end[-1] > 0 && buf_end[buf_end[-1] - 1] == 0)
2496 buf_end += buf_end[-1];
2502 if (syntax & RE_NO_BK_PARENS)
2509 if (syntax & RE_NO_BK_PARENS)
2516 if (syntax & RE_NEWLINE_ALT)
2523 if (syntax & RE_NO_BK_VBAR)
2530 if (syntax & RE_INTERVALS && syntax & RE_NO_BK_BRACES)
2531 goto handle_interval;
2537 if (p == pend) FREE_STACK_RETURN (REG_EESCAPE);
2539 /* Do not translate the character after the \, so that we can
2540 distinguish, e.g., \B from \b, even if we normally would
2541 translate, e.g., B to b. */
2547 if (syntax & RE_NO_BK_PARENS)
2548 goto normal_backslash;
2554 if (!(syntax & RE_NO_SHY_GROUPS)
2562 case ':': /* shy groups */
2566 /* All others are reserved for future constructs. */
2568 FREE_STACK_RETURN (REG_BADPAT);
2577 if (COMPILE_STACK_FULL)
2579 RETALLOC (compile_stack.stack, compile_stack.size << 1,
2580 compile_stack_elt_t);
2581 if (compile_stack.stack == NULL) return REG_ESPACE;
2583 compile_stack.size <<= 1;
2586 /* These are the values to restore when we hit end of this
2587 group. They are all relative offsets, so that if the
2588 whole pattern moves because of realloc, they will still
2590 COMPILE_STACK_TOP.begalt_offset = begalt - bufp->buffer;
2591 COMPILE_STACK_TOP.fixup_alt_jump
2592 = fixup_alt_jump ? fixup_alt_jump - bufp->buffer + 1 : 0;
2593 COMPILE_STACK_TOP.laststart_offset = buf_end - bufp->buffer;
2594 COMPILE_STACK_TOP.regnum = r;
2596 /* We will eventually replace the 0 with the number of
2597 groups inner to this one. But do not push a
2598 start_memory for groups beyond the last one we can
2599 represent in the compiled pattern. */
2600 if (r <= MAX_REGNUM)
2602 COMPILE_STACK_TOP.inner_group_offset
2603 = buf_end - bufp->buffer + 2;
2604 BUF_PUSH_3 (start_memory, r, 0);
2607 compile_stack.avail++;
2612 /* If we've reached MAX_REGNUM groups, then this open
2613 won't actually generate any code, so we'll have to
2614 clear pending_exact explicitly. */
2621 if (syntax & RE_NO_BK_PARENS) goto normal_backslash;
2623 if (COMPILE_STACK_EMPTY) {
2624 if (syntax & RE_UNMATCHED_RIGHT_PAREN_ORD)
2625 goto normal_backslash;
2627 FREE_STACK_RETURN (REG_ERPAREN);
2632 { /* Push a dummy failure point at the end of the
2633 alternative for a possible future
2634 `pop_failure_jump' to pop. See comments at
2635 `push_dummy_failure' in `re_match_2'. */
2636 BUF_PUSH (push_dummy_failure);
2638 /* We allocated space for this jump when we assigned
2639 to `fixup_alt_jump', in the `handle_alt' case below. */
2640 STORE_JUMP (jump_past_alt, fixup_alt_jump, buf_end - 1);
2643 /* See similar code for backslashed left paren above. */
2644 if (COMPILE_STACK_EMPTY) {
2645 if (syntax & RE_UNMATCHED_RIGHT_PAREN_ORD)
2648 FREE_STACK_RETURN (REG_ERPAREN);
2651 /* Since we just checked for an empty stack above, this
2652 ``can't happen''. */
2653 assert (compile_stack.avail != 0);
2655 /* We don't just want to restore into `regnum', because
2656 later groups should continue to be numbered higher,
2657 as in `(ab)c(de)' -- the second group is #2. */
2658 regnum_t this_group_regnum;
2660 compile_stack.avail--;
2661 begalt = bufp->buffer + COMPILE_STACK_TOP.begalt_offset;
2663 = COMPILE_STACK_TOP.fixup_alt_jump
2664 ? bufp->buffer + COMPILE_STACK_TOP.fixup_alt_jump - 1
2666 laststart = bufp->buffer + COMPILE_STACK_TOP.laststart_offset;
2667 this_group_regnum = COMPILE_STACK_TOP.regnum;
2668 /* If we've reached MAX_REGNUM groups, then this open
2669 won't actually generate any code, so we'll have to
2670 clear pending_exact explicitly. */
2673 /* We're at the end of the group, so now we know how many
2674 groups were inside this one. */
2675 if (this_group_regnum <= MAX_REGNUM)
2677 unsigned char *inner_group_loc
2678 = bufp->buffer + COMPILE_STACK_TOP.inner_group_offset;
2680 *inner_group_loc = regnum - this_group_regnum;
2681 BUF_PUSH_3 (stop_memory, this_group_regnum,
2682 regnum - this_group_regnum);
2688 case '|': /* `\|'. */
2689 if (syntax & RE_LIMITED_OPS || syntax & RE_NO_BK_VBAR)
2690 goto normal_backslash;
2692 if (syntax & RE_LIMITED_OPS)
2695 /* Insert before the previous alternative a jump which
2696 jumps to this alternative if the former fails. */
2697 GET_BUFFER_SPACE (3);
2698 INSERT_JUMP (on_failure_jump, begalt, buf_end + 6);
2702 /* The alternative before this one has a jump after it
2703 which gets executed if it gets matched. Adjust that
2704 jump so it will jump to this alternative's analogous
2705 jump (put in below, which in turn will jump to the next
2706 (if any) alternative's such jump, etc.). The last such
2707 jump jumps to the correct final destination. A picture:
2713 If we are at `b', then fixup_alt_jump right now points to a
2714 three-byte space after `a'. We'll put in the jump, set
2715 fixup_alt_jump to right after `b', and leave behind three
2716 bytes which we'll fill in when we get to after `c'. */
2719 STORE_JUMP (jump_past_alt, fixup_alt_jump, buf_end);
2721 /* Mark and leave space for a jump after this alternative,
2722 to be filled in later either by next alternative or
2723 when know we're at the end of a series of alternatives. */
2724 fixup_alt_jump = buf_end;
2725 GET_BUFFER_SPACE (3);
2734 /* If \{ is a literal. */
2735 if (!(syntax & RE_INTERVALS)
2736 /* If we're at `\{' and it's not the open-interval
2738 || ((syntax & RE_INTERVALS) && (syntax & RE_NO_BK_BRACES))
2739 || (p - 2 == pattern && p == pend))
2740 goto normal_backslash;
2744 /* If got here, then the syntax allows intervals. */
2746 /* At least (most) this many matches must be made. */
2747 int lower_bound = -1, upper_bound = -1;
2749 beg_interval = p - 1;
2753 if (syntax & RE_NO_BK_BRACES)
2754 goto unfetch_interval;
2756 FREE_STACK_RETURN (REG_EBRACE);
2759 GET_UNSIGNED_NUMBER (lower_bound);
2763 GET_UNSIGNED_NUMBER (upper_bound);
2764 if (upper_bound < 0) upper_bound = RE_DUP_MAX;
2767 /* Interval such as `{1}' => match exactly once. */
2768 upper_bound = lower_bound;
2770 if (lower_bound < 0 || upper_bound > RE_DUP_MAX
2771 || lower_bound > upper_bound)
2773 if (syntax & RE_NO_BK_BRACES)
2774 goto unfetch_interval;
2776 FREE_STACK_RETURN (REG_BADBR);
2779 if (!(syntax & RE_NO_BK_BRACES))
2781 if (c != '\\') FREE_STACK_RETURN (REG_EBRACE);
2788 if (syntax & RE_NO_BK_BRACES)
2789 goto unfetch_interval;
2791 FREE_STACK_RETURN (REG_BADBR);
2794 /* We just parsed a valid interval. */
2796 /* If it's invalid to have no preceding re. */
2799 if (syntax & RE_CONTEXT_INVALID_OPS)
2800 FREE_STACK_RETURN (REG_BADRPT);
2801 else if (syntax & RE_CONTEXT_INDEP_OPS)
2802 laststart = buf_end;
2804 goto unfetch_interval;
2807 /* If the upper bound is zero, don't want to succeed at
2808 all; jump from `laststart' to `b + 3', which will be
2809 the end of the buffer after we insert the jump. */
2810 if (upper_bound == 0)
2812 GET_BUFFER_SPACE (3);
2813 INSERT_JUMP (jump, laststart, buf_end + 3);
2817 /* Otherwise, we have a nontrivial interval. When
2818 we're all done, the pattern will look like:
2819 set_number_at <jump count> <upper bound>
2820 set_number_at <succeed_n count> <lower bound>
2821 succeed_n <after jump addr> <succeed_n count>
2823 jump_n <succeed_n addr> <jump count>
2824 (The upper bound and `jump_n' are omitted if
2825 `upper_bound' is 1, though.) */
2827 { /* If the upper bound is > 1, we need to insert
2828 more at the end of the loop. */
2829 unsigned nbytes = 10 + (upper_bound > 1) * 10;
2831 GET_BUFFER_SPACE (nbytes);
2833 /* Initialize lower bound of the `succeed_n', even
2834 though it will be set during matching by its
2835 attendant `set_number_at' (inserted next),
2836 because `re_compile_fastmap' needs to know.
2837 Jump to the `jump_n' we might insert below. */
2838 INSERT_JUMP2 (succeed_n, laststart,
2839 buf_end + 5 + (upper_bound > 1) * 5,
2843 /* Code to initialize the lower bound. Insert
2844 before the `succeed_n'. The `5' is the last two
2845 bytes of this `set_number_at', plus 3 bytes of
2846 the following `succeed_n'. */
2847 insert_op2 (set_number_at, laststart, 5, lower_bound, buf_end);
2850 if (upper_bound > 1)
2851 { /* More than one repetition is allowed, so
2852 append a backward jump to the `succeed_n'
2853 that starts this interval.
2855 When we've reached this during matching,
2856 we'll have matched the interval once, so
2857 jump back only `upper_bound - 1' times. */
2858 STORE_JUMP2 (jump_n, buf_end, laststart + 5,
2862 /* The location we want to set is the second
2863 parameter of the `jump_n'; that is `b-2' as
2864 an absolute address. `laststart' will be
2865 the `set_number_at' we're about to insert;
2866 `laststart+3' the number to set, the source
2867 for the relative address. But we are
2868 inserting into the middle of the pattern --
2869 so everything is getting moved up by 5.
2870 Conclusion: (b - 2) - (laststart + 3) + 5,
2871 i.e., b - laststart.
2873 We insert this at the beginning of the loop
2874 so that if we fail during matching, we'll
2875 reinitialize the bounds. */
2876 insert_op2 (set_number_at, laststart,
2877 buf_end - laststart,
2878 upper_bound - 1, buf_end);
2883 beg_interval = NULL;
2888 /* If an invalid interval, match the characters as literals. */
2889 assert (beg_interval);
2891 beg_interval = NULL;
2893 /* normal_char and normal_backslash need `c'. */
2896 if (!(syntax & RE_NO_BK_BRACES))
2898 if (p > pattern && p[-1] == '\\')
2899 goto normal_backslash;
2904 /* There is no way to specify the before_dot and after_dot
2905 operators. rms says this is ok. --karl */
2911 laststart = buf_end;
2913 /* XEmacs addition */
2914 if (c >= 0x80 || syntax_spec_code[c] == 0377)
2915 FREE_STACK_RETURN (REG_ESYNTAX);
2916 BUF_PUSH_2 (syntaxspec, syntax_spec_code[c]);
2920 laststart = buf_end;
2922 /* XEmacs addition */
2923 if (c >= 0x80 || syntax_spec_code[c] == 0377)
2924 FREE_STACK_RETURN (REG_ESYNTAX);
2925 BUF_PUSH_2 (notsyntaxspec, syntax_spec_code[c]);
2929 /* 97.2.17 jhod merged in to XEmacs from mule-2.3 */
2931 laststart = buf_end;
2933 if (c < 32 || c > 127)
2934 FREE_STACK_RETURN (REG_ECATEGORY);
2935 BUF_PUSH_2 (categoryspec, c);
2939 laststart = buf_end;
2941 if (c < 32 || c > 127)
2942 FREE_STACK_RETURN (REG_ECATEGORY);
2943 BUF_PUSH_2 (notcategoryspec, c);
2945 /* end of category patch */
2951 laststart = buf_end;
2952 BUF_PUSH (wordchar);
2957 laststart = buf_end;
2958 BUF_PUSH (notwordchar);
2971 BUF_PUSH (wordbound);
2975 BUF_PUSH (notwordbound);
2986 case '1': case '2': case '3': case '4': case '5':
2987 case '6': case '7': case '8': case '9':
2990 if (syntax & RE_NO_BK_REFS)
2996 FREE_STACK_RETURN (REG_ESUBREG);
2998 /* Can't back reference to a subexpression if inside of it. */
2999 if (group_in_compile_stack (compile_stack, reg))
3002 laststart = buf_end;
3003 BUF_PUSH_2 (duplicate, reg);
3010 if (syntax & RE_BK_PLUS_QM)
3013 goto normal_backslash;
3017 /* You might think it would be useful for \ to mean
3018 not to translate; but if we don't translate it,
3019 it will never match anything. */
3027 /* Expects the character in `c'. */
3028 /* `p' points to the location after where `c' came from. */
3031 /* XEmacs: modifications here for Mule. */
3032 /* `q' points to the beginning of the next char. */
3035 /* If no exactn currently being built. */
3038 /* If last exactn not at current position. */
3039 || pending_exact + *pending_exact + 1 != buf_end
3041 /* We have only one byte following the exactn for the count. */
3042 || ((unsigned int) (*pending_exact + (q - p)) >=
3043 ((unsigned int) (1 << BYTEWIDTH) - 1))
3045 /* If followed by a repetition operator. */
3046 || *q == '*' || *q == '^'
3047 || ((syntax & RE_BK_PLUS_QM)
3048 ? *q == '\\' && (q[1] == '+' || q[1] == '?')
3049 : (*q == '+' || *q == '?'))
3050 || ((syntax & RE_INTERVALS)
3051 && ((syntax & RE_NO_BK_BRACES)
3053 : (q[0] == '\\' && q[1] == '{'))))
3055 /* Start building a new exactn. */
3057 laststart = buf_end;
3059 BUF_PUSH_2 (exactn, 0);
3060 pending_exact = buf_end - 1;
3069 Bufbyte tmp_buf[MAX_EMCHAR_LEN];
3072 bt_count = set_charptr_emchar (tmp_buf, c);
3074 for (i = 0; i < bt_count; i++)
3076 BUF_PUSH (tmp_buf[i]);
3084 } /* while p != pend */
3087 /* Through the pattern now. */
3090 STORE_JUMP (jump_past_alt, fixup_alt_jump, buf_end);
3092 if (!COMPILE_STACK_EMPTY)
3093 FREE_STACK_RETURN (REG_EPAREN);
3095 /* If we don't want backtracking, force success
3096 the first time we reach the end of the compiled pattern. */
3097 if (syntax & RE_NO_POSIX_BACKTRACKING)
3100 free (compile_stack.stack);
3102 /* We have succeeded; set the length of the buffer. */
3103 bufp->used = buf_end - bufp->buffer;
3108 DEBUG_PRINT1 ("\nCompiled pattern: \n");
3109 print_compiled_pattern (bufp);
3113 #ifndef MATCH_MAY_ALLOCATE
3114 /* Initialize the failure stack to the largest possible stack. This
3115 isn't necessary unless we're trying to avoid calling alloca in
3116 the search and match routines. */
3118 int num_regs = bufp->re_nsub + 1;
3120 /* Since DOUBLE_FAIL_STACK refuses to double only if the current size
3121 is strictly greater than re_max_failures, the largest possible stack
3122 is 2 * re_max_failures failure points. */
3123 if (fail_stack.size < (2 * re_max_failures * MAX_FAILURE_ITEMS))
3125 fail_stack.size = (2 * re_max_failures * MAX_FAILURE_ITEMS);
3128 if (! fail_stack.stack)
3130 = (fail_stack_elt_t *) xmalloc (fail_stack.size
3131 * sizeof (fail_stack_elt_t));
3134 = (fail_stack_elt_t *) xrealloc (fail_stack.stack,
3136 * sizeof (fail_stack_elt_t)));
3137 #else /* not emacs */
3138 if (! fail_stack.stack)
3140 = (fail_stack_elt_t *) malloc (fail_stack.size
3141 * sizeof (fail_stack_elt_t));
3144 = (fail_stack_elt_t *) realloc (fail_stack.stack,
3146 * sizeof (fail_stack_elt_t)));
3150 regex_grow_registers (num_regs);
3152 #endif /* not MATCH_MAY_ALLOCATE */
3155 } /* regex_compile */
3157 /* Subroutines for `regex_compile'. */
3159 /* Store OP at LOC followed by two-byte integer parameter ARG. */
3162 store_op1 (re_opcode_t op, unsigned char *loc, int arg)
3164 *loc = (unsigned char) op;
3165 STORE_NUMBER (loc + 1, arg);
3169 /* Like `store_op1', but for two two-byte parameters ARG1 and ARG2. */
3172 store_op2 (re_opcode_t op, unsigned char *loc, int arg1, int arg2)
3174 *loc = (unsigned char) op;
3175 STORE_NUMBER (loc + 1, arg1);
3176 STORE_NUMBER (loc + 3, arg2);
3180 /* Copy the bytes from LOC to END to open up three bytes of space at LOC
3181 for OP followed by two-byte integer parameter ARG. */
3184 insert_op1 (re_opcode_t op, unsigned char *loc, int arg, unsigned char *end)
3186 REGISTER unsigned char *pfrom = end;
3187 REGISTER unsigned char *pto = end + 3;
3189 while (pfrom != loc)
3192 store_op1 (op, loc, arg);
3196 /* Like `insert_op1', but for two two-byte parameters ARG1 and ARG2. */
3199 insert_op2 (re_opcode_t op, unsigned char *loc, int arg1, int arg2,
3202 REGISTER unsigned char *pfrom = end;
3203 REGISTER unsigned char *pto = end + 5;
3205 while (pfrom != loc)
3208 store_op2 (op, loc, arg1, arg2);
3212 /* P points to just after a ^ in PATTERN. Return true if that ^ comes
3213 after an alternative or a begin-subexpression. We assume there is at
3214 least one character before the ^. */
3217 at_begline_loc_p (re_char *pattern, re_char *p, reg_syntax_t syntax)
3219 re_char *prev = p - 2;
3220 boolean prev_prev_backslash = prev > pattern && prev[-1] == '\\';
3223 /* After a subexpression? */
3224 (*prev == '(' && (syntax & RE_NO_BK_PARENS || prev_prev_backslash))
3225 /* After an alternative? */
3226 || (*prev == '|' && (syntax & RE_NO_BK_VBAR || prev_prev_backslash));
3230 /* The dual of at_begline_loc_p. This one is for $. We assume there is
3231 at least one character after the $, i.e., `P < PEND'. */
3234 at_endline_loc_p (re_char *p, re_char *pend, int syntax)
3237 boolean next_backslash = *next == '\\';
3238 re_char *next_next = p + 1 < pend ? p + 1 : 0;
3241 /* Before a subexpression? */
3242 (syntax & RE_NO_BK_PARENS ? *next == ')'
3243 : next_backslash && next_next && *next_next == ')')
3244 /* Before an alternative? */
3245 || (syntax & RE_NO_BK_VBAR ? *next == '|'
3246 : next_backslash && next_next && *next_next == '|');
3250 /* Returns true if REGNUM is in one of COMPILE_STACK's elements and
3251 false if it's not. */
3254 group_in_compile_stack (compile_stack_type compile_stack, regnum_t regnum)
3258 for (this_element = compile_stack.avail - 1;
3261 if (compile_stack.stack[this_element].regnum == regnum)
3268 /* Read the ending character of a range (in a bracket expression) from the
3269 uncompiled pattern *P_PTR (which ends at PEND). We assume the
3270 starting character is in `P[-2]'. (`P[-1]' is the character `-'.)
3271 Then we set the translation of all bits between the starting and
3272 ending characters (inclusive) in the compiled pattern B.
3274 Return an error code.
3276 We use these short variable names so we can use the same macros as
3277 `regex_compile' itself. */
3279 static reg_errcode_t
3280 compile_range (re_char **p_ptr, re_char *pend, RE_TRANSLATE_TYPE translate,
3281 reg_syntax_t syntax, unsigned char *buf_end)
3285 re_char *p = *p_ptr;
3286 int range_start, range_end;
3291 /* Even though the pattern is a signed `char *', we need to fetch
3292 with unsigned char *'s; if the high bit of the pattern character
3293 is set, the range endpoints will be negative if we fetch using a
3296 We also want to fetch the endpoints without translating them; the
3297 appropriate translation is done in the bit-setting loop below. */
3298 /* The SVR4 compiler on the 3B2 had trouble with unsigned const char *. */
3299 range_start = ((const unsigned char *) p)[-2];
3300 range_end = ((const unsigned char *) p)[0];
3302 /* Have to increment the pointer into the pattern string, so the
3303 caller isn't still at the ending character. */
3306 /* If the start is after the end, the range is empty. */
3307 if (range_start > range_end)
3308 return syntax & RE_NO_EMPTY_RANGES ? REG_ERANGE : REG_NOERROR;
3310 /* Here we see why `this_char' has to be larger than an `unsigned
3311 char' -- the range is inclusive, so if `range_end' == 0xff
3312 (assuming 8-bit characters), we would otherwise go into an infinite
3313 loop, since all characters <= 0xff. */
3314 for (this_char = range_start; this_char <= range_end; this_char++)
3316 SET_LIST_BIT (TRANSLATE (this_char));
3324 static reg_errcode_t
3325 compile_extended_range (re_char **p_ptr, re_char *pend,
3326 RE_TRANSLATE_TYPE translate,
3327 reg_syntax_t syntax, Lisp_Object rtab)
3329 Emchar this_char, range_start, range_end;
3335 p = (const Bufbyte *) *p_ptr;
3336 range_end = charptr_emchar (p);
3337 p--; /* back to '-' */
3338 DEC_CHARPTR (p); /* back to start of range */
3339 /* We also want to fetch the endpoints without translating them; the
3340 appropriate translation is done in the bit-setting loop below. */
3341 range_start = charptr_emchar (p);
3342 INC_CHARPTR (*p_ptr);
3344 /* If the start is after the end, the range is empty. */
3345 if (range_start > range_end)
3346 return syntax & RE_NO_EMPTY_RANGES ? REG_ERANGE : REG_NOERROR;
3348 /* Can't have ranges spanning different charsets, except maybe for
3349 ranges entirely within the first 256 chars. */
3351 if ((range_start >= 0x100 || range_end >= 0x100)
3352 && CHAR_LEADING_BYTE (range_start) !=
3353 CHAR_LEADING_BYTE (range_end))
3354 return REG_ERANGESPAN;
3356 /* As advertised, translations only work over the 0 - 0x7F range.
3357 Making this kind of stuff work generally is much harder.
3358 Iterating over the whole range like this would be way efficient
3359 if the range encompasses 10,000 chars or something. You'd have
3360 to do something like this:
3364 map over translation table in [range_start, range_end] of
3365 (put the mapped range in a;
3366 put the translation in b)
3367 invert the range in a and truncate to [range_start, range_end]
3368 compute the union of a, b
3369 union the result into rtab
3371 for (this_char = range_start;
3372 this_char <= range_end && this_char < 0x80; this_char++)
3374 SET_RANGETAB_BIT (TRANSLATE (this_char));
3377 if (this_char <= range_end)
3378 put_range_table (rtab, this_char, range_end, Qt);
3385 /* re_compile_fastmap computes a ``fastmap'' for the compiled pattern in
3386 BUFP. A fastmap records which of the (1 << BYTEWIDTH) possible
3387 characters can start a string that matches the pattern. This fastmap
3388 is used by re_search to skip quickly over impossible starting points.
3390 The caller must supply the address of a (1 << BYTEWIDTH)-byte data
3391 area as BUFP->fastmap.
3393 We set the `fastmap', `fastmap_accurate', and `can_be_null' fields in
3396 Returns 0 if we succeed, -2 if an internal error. */
3399 re_compile_fastmap (struct re_pattern_buffer *bufp)
3402 #ifdef MATCH_MAY_ALLOCATE
3403 fail_stack_type fail_stack;
3405 DECLARE_DESTINATION;
3406 /* We don't push any register information onto the failure stack. */
3408 REGISTER char *fastmap = bufp->fastmap;
3409 unsigned char *pattern = bufp->buffer;
3410 unsigned long size = bufp->used;
3411 unsigned char *p = pattern;
3412 REGISTER unsigned char *pend = pattern + size;
3415 /* This holds the pointer to the failure stack, when
3416 it is allocated relocatably. */
3417 fail_stack_elt_t *failure_stack_ptr;
3420 /* Assume that each path through the pattern can be null until
3421 proven otherwise. We set this false at the bottom of switch
3422 statement, to which we get only if a particular path doesn't
3423 match the empty string. */
3424 boolean path_can_be_null = true;
3426 /* We aren't doing a `succeed_n' to begin with. */
3427 boolean succeed_n_p = false;
3429 assert (fastmap != NULL && p != NULL);
3432 memset (fastmap, 0, 1 << BYTEWIDTH); /* Assume nothing's valid. */
3433 bufp->fastmap_accurate = 1; /* It will be when we're done. */
3434 bufp->can_be_null = 0;
3438 if (p == pend || *p == succeed)
3440 /* We have reached the (effective) end of pattern. */
3441 if (!FAIL_STACK_EMPTY ())
3443 bufp->can_be_null |= path_can_be_null;
3445 /* Reset for next path. */
3446 path_can_be_null = true;
3448 p = (unsigned char *) fail_stack.stack[--fail_stack.avail].pointer;
3456 /* We should never be about to go beyond the end of the pattern. */
3459 switch (SWITCH_ENUM_CAST ((re_opcode_t) *p++))
3462 /* I guess the idea here is to simply not bother with a fastmap
3463 if a backreference is used, since it's too hard to figure out
3464 the fastmap for the corresponding group. Setting
3465 `can_be_null' stops `re_search_2' from using the fastmap, so
3466 that is all we do. */
3468 bufp->can_be_null = 1;
3472 /* Following are the cases which match a character. These end
3481 /* XEmacs: Under Mule, these bit vectors will
3482 only contain values for characters below 0x80. */
3483 for (j = *p++ * BYTEWIDTH - 1; j >= 0; j--)
3484 if (p[j / BYTEWIDTH] & (1 << (j % BYTEWIDTH)))
3490 /* Chars beyond end of map must be allowed. */
3492 for (j = *p * BYTEWIDTH; j < 0x80; j++)
3494 /* And all extended characters must be allowed, too. */
3495 for (j = 0x80; j < 0xA0; j++)
3497 #else /* not MULE */
3498 for (j = *p * BYTEWIDTH; j < (1 << BYTEWIDTH); j++)
3502 for (j = *p++ * BYTEWIDTH - 1; j >= 0; j--)
3503 if (!(p[j / BYTEWIDTH] & (1 << (j % BYTEWIDTH))))
3513 nentries = unified_range_table_nentries (p);
3514 for (i = 0; i < nentries; i++)
3516 EMACS_INT first, last;
3517 Lisp_Object dummy_val;
3519 Bufbyte strr[MAX_EMCHAR_LEN];
3521 unified_range_table_get_range (p, i, &first, &last,
3523 for (jj = first; jj <= last && jj < 0x80; jj++)
3525 /* Ranges below 0x100 can span charsets, but there
3526 are only two (Control-1 and Latin-1), and
3527 either first or last has to be in them. */
3528 set_charptr_emchar (strr, first);
3532 set_charptr_emchar (strr, last);
3539 case charset_mule_not:
3544 nentries = unified_range_table_nentries (p);
3545 for (i = 0; i < nentries; i++)
3547 EMACS_INT first, last;
3548 Lisp_Object dummy_val;
3550 int smallest_prev = 0;
3552 unified_range_table_get_range (p, i, &first, &last,
3554 for (jj = smallest_prev; jj < first && jj < 0x80; jj++)
3556 smallest_prev = last + 1;
3557 if (smallest_prev >= 0x80)
3560 /* Calculating which leading bytes are actually allowed
3561 here is rather difficult, so we just punt and allow
3563 for (i = 0x80; i < 0xA0; i++)
3575 for (j = 0; j < (1 << BYTEWIDTH); j++)
3578 (regex_emacs_buffer->mirror_syntax_table), j) == Sword)
3587 goto matchnotsyntax;
3589 for (j = 0; j < (1 << BYTEWIDTH); j++)
3592 (regex_emacs_buffer->mirror_syntax_table), j) != Sword)
3600 int fastmap_newline = fastmap['\n'];
3602 /* `.' matches anything ... */
3604 /* "anything" only includes bytes that can be the
3605 first byte of a character. */
3606 for (j = 0; j < 0xA0; j++)
3609 for (j = 0; j < (1 << BYTEWIDTH); j++)
3613 /* ... except perhaps newline. */
3614 if (!(bufp->syntax & RE_DOT_NEWLINE))
3615 fastmap['\n'] = fastmap_newline;
3617 /* Return if we have already set `can_be_null'; if we have,
3618 then the fastmap is irrelevant. Something's wrong here. */
3619 else if (bufp->can_be_null)
3622 /* Otherwise, have to check alternative paths. */
3631 for (j = 0; j < 0x80; j++)
3634 (regex_emacs_buffer->mirror_syntax_table), j) ==
3635 (enum syntaxcode) k)
3637 for (j = 0x80; j < 0xA0; j++)
3639 if (LEADING_BYTE_PREFIX_P(j))
3640 /* too complicated to calculate this right */
3647 cset = CHARSET_BY_LEADING_BYTE (j);
3648 if (CHARSETP (cset))
3650 if (charset_syntax (regex_emacs_buffer, cset,
3652 == Sword || multi_p)
3657 #else /* not MULE */
3658 for (j = 0; j < (1 << BYTEWIDTH); j++)
3661 (regex_emacs_buffer->mirror_syntax_table), j) ==
3662 (enum syntaxcode) k)
3672 for (j = 0; j < 0x80; j++)
3675 (regex_emacs_buffer->mirror_syntax_table), j) !=
3676 (enum syntaxcode) k)
3678 for (j = 0x80; j < 0xA0; j++)
3680 if (LEADING_BYTE_PREFIX_P(j))
3681 /* too complicated to calculate this right */
3688 cset = CHARSET_BY_LEADING_BYTE (j);
3689 if (CHARSETP (cset))
3691 if (charset_syntax (regex_emacs_buffer, cset,
3693 != Sword || multi_p)
3698 #else /* not MULE */
3699 for (j = 0; j < (1 << BYTEWIDTH); j++)
3702 (regex_emacs_buffer->mirror_syntax_table), j) !=
3703 (enum syntaxcode) k)
3709 /* 97/2/17 jhod category patch */
3711 case notcategoryspec:
3712 bufp->can_be_null = 1;
3714 /* end if category patch */
3717 /* All cases after this match the empty string. These end with
3725 #endif /* not emacs */
3737 case push_dummy_failure:
3742 case pop_failure_jump:
3743 case maybe_pop_jump:
3746 case dummy_failure_jump:
3747 EXTRACT_NUMBER_AND_INCR (j, p);
3752 /* Jump backward implies we just went through the body of a
3753 loop and matched nothing. Opcode jumped to should be
3754 `on_failure_jump' or `succeed_n'. Just treat it like an
3755 ordinary jump. For a * loop, it has pushed its failure
3756 point already; if so, discard that as redundant. */
3757 if ((re_opcode_t) *p != on_failure_jump
3758 && (re_opcode_t) *p != succeed_n)
3762 EXTRACT_NUMBER_AND_INCR (j, p);
3765 /* If what's on the stack is where we are now, pop it. */
3766 if (!FAIL_STACK_EMPTY ()
3767 && fail_stack.stack[fail_stack.avail - 1].pointer == p)
3773 case on_failure_jump:
3774 case on_failure_keep_string_jump:
3775 handle_on_failure_jump:
3776 EXTRACT_NUMBER_AND_INCR (j, p);
3778 /* For some patterns, e.g., `(a?)?', `p+j' here points to the
3779 end of the pattern. We don't want to push such a point,
3780 since when we restore it above, entering the switch will
3781 increment `p' past the end of the pattern. We don't need
3782 to push such a point since we obviously won't find any more
3783 fastmap entries beyond `pend'. Such a pattern can match
3784 the null string, though. */
3787 if (!PUSH_PATTERN_OP (p + j, fail_stack))
3789 RESET_FAIL_STACK ();
3794 bufp->can_be_null = 1;
3798 EXTRACT_NUMBER_AND_INCR (k, p); /* Skip the n. */
3799 succeed_n_p = false;
3806 /* Get to the number of times to succeed. */
3809 /* Increment p past the n for when k != 0. */
3810 EXTRACT_NUMBER_AND_INCR (k, p);
3814 succeed_n_p = true; /* Spaghetti code alert. */
3815 goto handle_on_failure_jump;
3832 abort (); /* We have listed all the cases. */
3835 /* Getting here means we have found the possible starting
3836 characters for one path of the pattern -- and that the empty
3837 string does not match. We need not follow this path further.
3838 Instead, look at the next alternative (remembered on the
3839 stack), or quit if no more. The test at the top of the loop
3840 does these things. */
3841 path_can_be_null = false;
3845 /* Set `can_be_null' for the last path (also the first path, if the
3846 pattern is empty). */
3847 bufp->can_be_null |= path_can_be_null;
3850 RESET_FAIL_STACK ();
3852 } /* re_compile_fastmap */
3854 /* Set REGS to hold NUM_REGS registers, storing them in STARTS and
3855 ENDS. Subsequent matches using PATTERN_BUFFER and REGS will use
3856 this memory for recording register information. STARTS and ENDS
3857 must be allocated using the malloc library routine, and must each
3858 be at least NUM_REGS * sizeof (regoff_t) bytes long.
3860 If NUM_REGS == 0, then subsequent matches should allocate their own
3863 Unless this function is called, the first search or match using
3864 PATTERN_BUFFER will allocate its own register data, without
3865 freeing the old data. */
3868 re_set_registers (struct re_pattern_buffer *bufp, struct re_registers *regs,
3869 unsigned num_regs, regoff_t *starts, regoff_t *ends)
3873 bufp->regs_allocated = REGS_REALLOCATE;
3874 regs->num_regs = num_regs;
3875 regs->start = starts;
3880 bufp->regs_allocated = REGS_UNALLOCATED;
3882 regs->start = regs->end = (regoff_t *) 0;
3886 /* Searching routines. */
3888 /* Like re_search_2, below, but only one string is specified, and
3889 doesn't let you say where to stop matching. */
3892 re_search (struct re_pattern_buffer *bufp, const char *string, int size,
3893 int startpos, int range, struct re_registers *regs)
3895 return re_search_2 (bufp, NULL, 0, string, size, startpos, range,
3900 /* Snarfed from src/lisp.h, needed for compiling [ce]tags. */
3901 # define bytecount_to_charcount(ptr, len) (len)
3902 # define charcount_to_bytecount(ptr, len) (len)
3903 typedef int Charcount;
3906 /* Using the compiled pattern in BUFP->buffer, first tries to match the
3907 virtual concatenation of STRING1 and STRING2, starting first at index
3908 STARTPOS, then at STARTPOS + 1, and so on.
3910 With MULE, STARTPOS is a byte position, not a char position. And the
3911 search will increment STARTPOS by the width of the current leading
3914 STRING1 and STRING2 have length SIZE1 and SIZE2, respectively.
3916 RANGE is how far to scan while trying to match. RANGE = 0 means try
3917 only at STARTPOS; in general, the last start tried is STARTPOS +
3920 With MULE, RANGE is a byte position, not a char position. The last
3921 start tried is the character starting <= STARTPOS + RANGE.
3923 In REGS, return the indices of the virtual concatenation of STRING1
3924 and STRING2 that matched the entire BUFP->buffer and its contained
3927 Do not consider matching one past the index STOP in the virtual
3928 concatenation of STRING1 and STRING2.
3930 We return either the position in the strings at which the match was
3931 found, -1 if no match, or -2 if error (such as failure
3935 re_search_2 (struct re_pattern_buffer *bufp, const char *str1,
3936 int size1, const char *str2, int size2, int startpos,
3937 int range, struct re_registers *regs, int stop)
3940 re_char *string1 = (re_char *) str1;
3941 re_char *string2 = (re_char *) str2;
3942 REGISTER char *fastmap = bufp->fastmap;
3943 REGISTER RE_TRANSLATE_TYPE translate = bufp->translate;
3944 int total_size = size1 + size2;
3945 int endpos = startpos + range;
3946 #ifdef REGEX_BEGLINE_CHECK
3947 int anchored_at_begline = 0;
3952 /* Check for out-of-range STARTPOS. */
3953 if (startpos < 0 || startpos > total_size)
3956 /* Fix up RANGE if it might eventually take us outside
3957 the virtual concatenation of STRING1 and STRING2. */
3959 range = 0 - startpos;
3960 else if (endpos > total_size)
3961 range = total_size - startpos;
3963 /* If the search isn't to be a backwards one, don't waste time in a
3964 search for a pattern that must be anchored. */
3965 if (bufp->used > 0 && (re_opcode_t) bufp->buffer[0] == begbuf && range > 0)
3971 d = ((const unsigned char *)
3972 (startpos >= size1 ? string2 - size1 : string1) + startpos);
3973 range = charcount_to_bytecount (d, 1);
3977 /* Update the fastmap now if not correct already. */
3978 if (fastmap && !bufp->fastmap_accurate)
3979 if (re_compile_fastmap (bufp) == -2)
3982 #ifdef REGEX_BEGLINE_CHECK
3986 while (i < bufp->used)
3988 if (bufp->buffer[i] == start_memory ||
3989 bufp->buffer[i] == stop_memory)
3994 anchored_at_begline = i < bufp->used && bufp->buffer[i] == begline;
3998 /* Loop through the string, looking for a place to start matching. */
4001 #ifdef REGEX_BEGLINE_CHECK
4002 /* If the regex is anchored at the beginning of a line (i.e. with a ^),
4003 then we can speed things up by skipping to the next beginning-of-
4005 if (anchored_at_begline && startpos > 0 && startpos != size1 &&
4008 /* whose stupid idea was it anyway to make this
4009 function take two strings to match?? */
4013 if (startpos < size1 && startpos + range >= size1)
4014 lim = range - (size1 - startpos);
4016 d = ((const unsigned char *)
4017 (startpos >= size1 ? string2 - size1 : string1) + startpos);
4018 DEC_CHARPTR(d); /* Ok, since startpos != size1. */
4019 d_size = charcount_to_bytecount (d, 1);
4021 if (TRANSLATE_P (translate))
4022 while (range > lim && *d != '\n')
4024 d += d_size; /* Speedier INC_CHARPTR(d) */
4025 d_size = charcount_to_bytecount (d, 1);
4029 while (range > lim && *d != '\n')
4031 d += d_size; /* Speedier INC_CHARPTR(d) */
4032 d_size = charcount_to_bytecount (d, 1);
4036 startpos += irange - range;
4038 #endif /* REGEX_BEGLINE_CHECK */
4040 /* If a fastmap is supplied, skip quickly over characters that
4041 cannot be the start of a match. If the pattern can match the
4042 null string, however, we don't need to skip characters; we want
4043 the first null string. */
4044 if (fastmap && startpos < total_size && !bufp->can_be_null)
4046 if (range > 0) /* Searching forwards. */
4051 if (startpos < size1 && startpos + range >= size1)
4052 lim = range - (size1 - startpos);
4054 d = ((const unsigned char *)
4055 (startpos >= size1 ? string2 - size1 : string1) + startpos);
4057 /* Written out as an if-else to avoid testing `translate'
4059 if (TRANSLATE_P (translate))
4065 buf_ch = charptr_emchar (d);
4066 buf_ch = RE_TRANSLATE (buf_ch);
4067 if (buf_ch >= 0200 || fastmap[(unsigned char) buf_ch])
4070 if (fastmap[(unsigned char)RE_TRANSLATE (*d)])
4073 d_size = charcount_to_bytecount (d, 1);
4075 d += d_size; /* Speedier INC_CHARPTR(d) */
4078 while (range > lim && !fastmap[*d])
4080 d_size = charcount_to_bytecount (d, 1);
4082 d += d_size; /* Speedier INC_CHARPTR(d) */
4085 startpos += irange - range;
4087 else /* Searching backwards. */
4089 Emchar c = (size1 == 0 || startpos >= size1
4090 ? charptr_emchar (string2 + startpos - size1)
4091 : charptr_emchar (string1 + startpos));
4094 if (!(c >= 0200 || fastmap[(unsigned char) c]))
4097 if (!fastmap[(unsigned char) c])
4103 /* If can't match the null string, and that's all we have left, fail. */
4104 if (range >= 0 && startpos == total_size && fastmap
4105 && !bufp->can_be_null)
4108 #ifdef emacs /* XEmacs added, w/removal of immediate_quit */
4109 if (!no_quit_in_re_search)
4112 val = re_match_2_internal (bufp, string1, size1, string2, size2,
4113 startpos, regs, stop);
4114 #ifndef REGEX_MALLOC
4131 d = ((const unsigned char *)
4132 (startpos >= size1 ? string2 - size1 : string1) + startpos);
4133 d_size = charcount_to_bytecount (d, 1);
4139 /* Note startpos > size1 not >=. If we are on the
4140 string1/string2 boundary, we want to backup into string1. */
4141 d = ((const unsigned char *)
4142 (startpos > size1 ? string2 - size1 : string1) + startpos);
4144 d_size = charcount_to_bytecount (d, 1);
4152 /* Declarations and macros for re_match_2. */
4154 /* This converts PTR, a pointer into one of the search strings `string1'
4155 and `string2' into an offset from the beginning of that string. */
4156 #define POINTER_TO_OFFSET(ptr) \
4157 (FIRST_STRING_P (ptr) \
4158 ? ((regoff_t) ((ptr) - string1)) \
4159 : ((regoff_t) ((ptr) - string2 + size1)))
4161 /* Macros for dealing with the split strings in re_match_2. */
4163 #define MATCHING_IN_FIRST_STRING (dend == end_match_1)
4165 /* Call before fetching a character with *d. This switches over to
4166 string2 if necessary. */
4167 #define REGEX_PREFETCH() \
4170 /* End of string2 => fail. */ \
4171 if (dend == end_match_2) \
4173 /* End of string1 => advance to string2. */ \
4175 dend = end_match_2; \
4179 /* Test if at very beginning or at very end of the virtual concatenation
4180 of `string1' and `string2'. If only one string, it's `string2'. */
4181 #define AT_STRINGS_BEG(d) ((d) == (size1 ? string1 : string2) || !size2)
4182 #define AT_STRINGS_END(d) ((d) == end2)
4185 If the given position straddles the string gap, return the equivalent
4186 position that is before or after the gap, respectively; otherwise,
4187 return the same position. */
4188 #define POS_BEFORE_GAP_UNSAFE(d) ((d) == string2 ? end1 : (d))
4189 #define POS_AFTER_GAP_UNSAFE(d) ((d) == end1 ? string2 : (d))
4191 /* Test if CH is a word-constituent character. (XEmacs change) */
4192 #define WORDCHAR_P_UNSAFE(ch) \
4193 (SYNTAX_UNSAFE (XCHAR_TABLE (regex_emacs_buffer->mirror_syntax_table), \
4196 /* Free everything we malloc. */
4197 #ifdef MATCH_MAY_ALLOCATE
4198 #define FREE_VAR(var) if (var) REGEX_FREE (var); var = NULL
4199 #define FREE_VARIABLES() \
4201 REGEX_FREE_STACK (fail_stack.stack); \
4202 FREE_VAR (regstart); \
4203 FREE_VAR (regend); \
4204 FREE_VAR (old_regstart); \
4205 FREE_VAR (old_regend); \
4206 FREE_VAR (best_regstart); \
4207 FREE_VAR (best_regend); \
4208 FREE_VAR (reg_info); \
4209 FREE_VAR (reg_dummy); \
4210 FREE_VAR (reg_info_dummy); \
4212 #else /* not MATCH_MAY_ALLOCATE */
4213 #define FREE_VARIABLES() ((void)0) /* Do nothing! But inhibit gcc warning. */
4214 #endif /* MATCH_MAY_ALLOCATE */
4216 /* These values must meet several constraints. They must not be valid
4217 register values; since we have a limit of 255 registers (because
4218 we use only one byte in the pattern for the register number), we can
4219 use numbers larger than 255. They must differ by 1, because of
4220 NUM_FAILURE_ITEMS above. And the value for the lowest register must
4221 be larger than the value for the highest register, so we do not try
4222 to actually save any registers when none are active. */
4223 #define NO_HIGHEST_ACTIVE_REG (1 << BYTEWIDTH)
4224 #define NO_LOWEST_ACTIVE_REG (NO_HIGHEST_ACTIVE_REG + 1)
4226 /* Matching routines. */
4228 #ifndef emacs /* Emacs never uses this. */
4229 /* re_match is like re_match_2 except it takes only a single string. */
4232 re_match (struct re_pattern_buffer *bufp, const char *string, int size,
4233 int pos, struct re_registers *regs)
4235 int result = re_match_2_internal (bufp, NULL, 0, (re_char *) string, size,
4240 #endif /* not emacs */
4243 /* re_match_2 matches the compiled pattern in BUFP against the
4244 (virtual) concatenation of STRING1 and STRING2 (of length SIZE1 and
4245 SIZE2, respectively). We start matching at POS, and stop matching
4248 If REGS is non-null and the `no_sub' field of BUFP is nonzero, we
4249 store offsets for the substring each group matched in REGS. See the
4250 documentation for exactly how many groups we fill.
4252 We return -1 if no match, -2 if an internal error (such as the
4253 failure stack overflowing). Otherwise, we return the length of the
4254 matched substring. */
4257 re_match_2 (struct re_pattern_buffer *bufp, const char *string1,
4258 int size1, const char *string2, int size2, int pos,
4259 struct re_registers *regs, int stop)
4261 int result = re_match_2_internal (bufp, (re_char *) string1, size1,
4262 (re_char *) string2, size2,
4268 /* This is a separate function so that we can force an alloca cleanup
4271 re_match_2_internal (struct re_pattern_buffer *bufp, re_char *string1,
4272 int size1, re_char *string2, int size2, int pos,
4273 struct re_registers *regs, int stop)
4275 /* General temporaries. */
4278 int should_succeed; /* XEmacs change */
4280 /* Just past the end of the corresponding string. */
4281 re_char *end1, *end2;
4283 /* Pointers into string1 and string2, just past the last characters in
4284 each to consider matching. */
4285 re_char *end_match_1, *end_match_2;
4287 /* Where we are in the data, and the end of the current string. */
4290 /* Where we are in the pattern, and the end of the pattern. */
4291 unsigned char *p = bufp->buffer;
4292 REGISTER unsigned char *pend = p + bufp->used;
4294 /* Mark the opcode just after a start_memory, so we can test for an
4295 empty subpattern when we get to the stop_memory. */
4296 re_char *just_past_start_mem = 0;
4298 /* We use this to map every character in the string. */
4299 RE_TRANSLATE_TYPE translate = bufp->translate;
4301 /* Failure point stack. Each place that can handle a failure further
4302 down the line pushes a failure point on this stack. It consists of
4303 restart, regend, and reg_info for all registers corresponding to
4304 the subexpressions we're currently inside, plus the number of such
4305 registers, and, finally, two char *'s. The first char * is where
4306 to resume scanning the pattern; the second one is where to resume
4307 scanning the strings. If the latter is zero, the failure point is
4308 a ``dummy''; if a failure happens and the failure point is a dummy,
4309 it gets discarded and the next one is tried. */
4310 #ifdef MATCH_MAY_ALLOCATE /* otherwise, this is global. */
4311 fail_stack_type fail_stack;
4314 static unsigned failure_id;
4315 unsigned nfailure_points_pushed = 0, nfailure_points_popped = 0;
4319 /* This holds the pointer to the failure stack, when
4320 it is allocated relocatably. */
4321 fail_stack_elt_t *failure_stack_ptr;
4324 /* We fill all the registers internally, independent of what we
4325 return, for use in backreferences. The number here includes
4326 an element for register zero. */
4327 unsigned num_regs = bufp->re_nsub + 1;
4329 /* The currently active registers. */
4330 unsigned lowest_active_reg = NO_LOWEST_ACTIVE_REG;
4331 unsigned highest_active_reg = NO_HIGHEST_ACTIVE_REG;
4333 /* Information on the contents of registers. These are pointers into
4334 the input strings; they record just what was matched (on this
4335 attempt) by a subexpression part of the pattern, that is, the
4336 regnum-th regstart pointer points to where in the pattern we began
4337 matching and the regnum-th regend points to right after where we
4338 stopped matching the regnum-th subexpression. (The zeroth register
4339 keeps track of what the whole pattern matches.) */
4340 #ifdef MATCH_MAY_ALLOCATE /* otherwise, these are global. */
4341 re_char **regstart, **regend;
4344 /* If a group that's operated upon by a repetition operator fails to
4345 match anything, then the register for its start will need to be
4346 restored because it will have been set to wherever in the string we
4347 are when we last see its open-group operator. Similarly for a
4349 #ifdef MATCH_MAY_ALLOCATE /* otherwise, these are global. */
4350 re_char **old_regstart, **old_regend;
4353 /* The is_active field of reg_info helps us keep track of which (possibly
4354 nested) subexpressions we are currently in. The matched_something
4355 field of reg_info[reg_num] helps us tell whether or not we have
4356 matched any of the pattern so far this time through the reg_num-th
4357 subexpression. These two fields get reset each time through any
4358 loop their register is in. */
4359 #ifdef MATCH_MAY_ALLOCATE /* otherwise, this is global. */
4360 register_info_type *reg_info;
4363 /* The following record the register info as found in the above
4364 variables when we find a match better than any we've seen before.
4365 This happens as we backtrack through the failure points, which in
4366 turn happens only if we have not yet matched the entire string. */
4367 unsigned best_regs_set = false;
4368 #ifdef MATCH_MAY_ALLOCATE /* otherwise, these are global. */
4369 re_char **best_regstart, **best_regend;
4372 /* Logically, this is `best_regend[0]'. But we don't want to have to
4373 allocate space for that if we're not allocating space for anything
4374 else (see below). Also, we never need info about register 0 for
4375 any of the other register vectors, and it seems rather a kludge to
4376 treat `best_regend' differently than the rest. So we keep track of
4377 the end of the best match so far in a separate variable. We
4378 initialize this to NULL so that when we backtrack the first time
4379 and need to test it, it's not garbage. */
4380 re_char *match_end = NULL;
4382 /* This helps SET_REGS_MATCHED avoid doing redundant work. */
4383 int set_regs_matched_done = 0;
4385 /* Used when we pop values we don't care about. */
4386 #ifdef MATCH_MAY_ALLOCATE /* otherwise, these are global. */
4387 re_char **reg_dummy;
4388 register_info_type *reg_info_dummy;
4392 /* Counts the total number of registers pushed. */
4393 unsigned num_regs_pushed = 0;
4396 /* 1 if this match ends in the same string (string1 or string2)
4397 as the best previous match. */
4400 /* 1 if this match is the best seen so far. */
4401 boolean best_match_p;
4403 DEBUG_PRINT1 ("\n\nEntering re_match_2.\n");
4407 #ifdef MATCH_MAY_ALLOCATE
4408 /* Do not bother to initialize all the register variables if there are
4409 no groups in the pattern, as it takes a fair amount of time. If
4410 there are groups, we include space for register 0 (the whole
4411 pattern), even though we never use it, since it simplifies the
4412 array indexing. We should fix this. */
4415 regstart = REGEX_TALLOC (num_regs, re_char *);
4416 regend = REGEX_TALLOC (num_regs, re_char *);
4417 old_regstart = REGEX_TALLOC (num_regs, re_char *);
4418 old_regend = REGEX_TALLOC (num_regs, re_char *);
4419 best_regstart = REGEX_TALLOC (num_regs, re_char *);
4420 best_regend = REGEX_TALLOC (num_regs, re_char *);
4421 reg_info = REGEX_TALLOC (num_regs, register_info_type);
4422 reg_dummy = REGEX_TALLOC (num_regs, re_char *);
4423 reg_info_dummy = REGEX_TALLOC (num_regs, register_info_type);
4425 if (!(regstart && regend && old_regstart && old_regend && reg_info
4426 && best_regstart && best_regend && reg_dummy && reg_info_dummy))
4434 /* We must initialize all our variables to NULL, so that
4435 `FREE_VARIABLES' doesn't try to free them. */
4436 regstart = regend = old_regstart = old_regend = best_regstart
4437 = best_regend = reg_dummy = NULL;
4438 reg_info = reg_info_dummy = (register_info_type *) NULL;
4440 #endif /* MATCH_MAY_ALLOCATE */
4442 /* The starting position is bogus. */
4443 if (pos < 0 || pos > size1 + size2)
4449 /* Initialize subexpression text positions to -1 to mark ones that no
4450 start_memory/stop_memory has been seen for. Also initialize the
4451 register information struct. */
4452 for (mcnt = 1; mcnt < num_regs; mcnt++)
4454 regstart[mcnt] = regend[mcnt]
4455 = old_regstart[mcnt] = old_regend[mcnt] = REG_UNSET_VALUE;
4457 REG_MATCH_NULL_STRING_P (reg_info[mcnt]) = MATCH_NULL_UNSET_VALUE;
4458 IS_ACTIVE (reg_info[mcnt]) = 0;
4459 MATCHED_SOMETHING (reg_info[mcnt]) = 0;
4460 EVER_MATCHED_SOMETHING (reg_info[mcnt]) = 0;
4462 /* We move `string1' into `string2' if the latter's empty -- but not if
4463 `string1' is null. */
4464 if (size2 == 0 && string1 != NULL)
4471 end1 = string1 + size1;
4472 end2 = string2 + size2;
4474 /* Compute where to stop matching, within the two strings. */
4477 end_match_1 = string1 + stop;
4478 end_match_2 = string2;
4483 end_match_2 = string2 + stop - size1;
4486 /* `p' scans through the pattern as `d' scans through the data.
4487 `dend' is the end of the input string that `d' points within. `d'
4488 is advanced into the following input string whenever necessary, but
4489 this happens before fetching; therefore, at the beginning of the
4490 loop, `d' can be pointing at the end of a string, but it cannot
4492 if (size1 > 0 && pos <= size1)
4499 d = string2 + pos - size1;
4503 DEBUG_PRINT1 ("The compiled pattern is: \n");
4504 DEBUG_PRINT_COMPILED_PATTERN (bufp, p, pend);
4505 DEBUG_PRINT1 ("The string to match is: `");
4506 DEBUG_PRINT_DOUBLE_STRING (d, string1, size1, string2, size2);
4507 DEBUG_PRINT1 ("'\n");
4509 /* This loops over pattern commands. It exits by returning from the
4510 function if the match is complete, or it drops through if the match
4511 fails at this starting point in the input data. */
4514 DEBUG_PRINT2 ("\n0x%lx: ", (long) p);
4515 #ifdef emacs /* XEmacs added, w/removal of immediate_quit */
4516 if (!no_quit_in_re_search)
4521 { /* End of pattern means we might have succeeded. */
4522 DEBUG_PRINT1 ("end of pattern ... ");
4524 /* If we haven't matched the entire string, and we want the
4525 longest match, try backtracking. */
4526 if (d != end_match_2)
4528 same_str_p = (FIRST_STRING_P (match_end)
4529 == MATCHING_IN_FIRST_STRING);
4531 /* AIX compiler got confused when this was combined
4532 with the previous declaration. */
4534 best_match_p = d > match_end;
4536 best_match_p = !MATCHING_IN_FIRST_STRING;
4538 DEBUG_PRINT1 ("backtracking.\n");
4540 if (!FAIL_STACK_EMPTY ())
4541 { /* More failure points to try. */
4543 /* If exceeds best match so far, save it. */
4544 if (!best_regs_set || best_match_p)
4546 best_regs_set = true;
4549 DEBUG_PRINT1 ("\nSAVING match as best so far.\n");
4551 for (mcnt = 1; mcnt < num_regs; mcnt++)
4553 best_regstart[mcnt] = regstart[mcnt];
4554 best_regend[mcnt] = regend[mcnt];
4560 /* If no failure points, don't restore garbage. And if
4561 last match is real best match, don't restore second
4563 else if (best_regs_set && !best_match_p)
4566 /* Restore best match. It may happen that `dend ==
4567 end_match_1' while the restored d is in string2.
4568 For example, the pattern `x.*y.*z' against the
4569 strings `x-' and `y-z-', if the two strings are
4570 not consecutive in memory. */
4571 DEBUG_PRINT1 ("Restoring best registers.\n");
4574 dend = ((d >= string1 && d <= end1)
4575 ? end_match_1 : end_match_2);
4577 for (mcnt = 1; mcnt < num_regs; mcnt++)
4579 regstart[mcnt] = best_regstart[mcnt];
4580 regend[mcnt] = best_regend[mcnt];
4583 } /* d != end_match_2 */
4586 DEBUG_PRINT1 ("Accepting match.\n");
4588 /* If caller wants register contents data back, do it. */
4589 if (regs && !bufp->no_sub)
4591 /* Have the register data arrays been allocated? */
4592 if (bufp->regs_allocated == REGS_UNALLOCATED)
4593 { /* No. So allocate them with malloc. We need one
4594 extra element beyond `num_regs' for the `-1' marker
4596 regs->num_regs = MAX (RE_NREGS, num_regs + 1);
4597 regs->start = TALLOC (regs->num_regs, regoff_t);
4598 regs->end = TALLOC (regs->num_regs, regoff_t);
4599 if (regs->start == NULL || regs->end == NULL)
4604 bufp->regs_allocated = REGS_REALLOCATE;
4606 else if (bufp->regs_allocated == REGS_REALLOCATE)
4607 { /* Yes. If we need more elements than were already
4608 allocated, reallocate them. If we need fewer, just
4610 if (regs->num_regs < num_regs + 1)
4612 regs->num_regs = num_regs + 1;
4613 RETALLOC (regs->start, regs->num_regs, regoff_t);
4614 RETALLOC (regs->end, regs->num_regs, regoff_t);
4615 if (regs->start == NULL || regs->end == NULL)
4624 /* These braces fend off a "empty body in an else-statement"
4625 warning under GCC when assert expands to nothing. */
4626 assert (bufp->regs_allocated == REGS_FIXED);
4629 /* Convert the pointer data in `regstart' and `regend' to
4630 indices. Register zero has to be set differently,
4631 since we haven't kept track of any info for it. */
4632 if (regs->num_regs > 0)
4634 regs->start[0] = pos;
4635 regs->end[0] = (MATCHING_IN_FIRST_STRING
4636 ? ((regoff_t) (d - string1))
4637 : ((regoff_t) (d - string2 + size1)));
4640 /* Go through the first `min (num_regs, regs->num_regs)'
4641 registers, since that is all we initialized. */
4642 for (mcnt = 1; mcnt < MIN (num_regs, regs->num_regs); mcnt++)
4644 if (REG_UNSET (regstart[mcnt]) || REG_UNSET (regend[mcnt]))
4645 regs->start[mcnt] = regs->end[mcnt] = -1;
4649 = (regoff_t) POINTER_TO_OFFSET (regstart[mcnt]);
4651 = (regoff_t) POINTER_TO_OFFSET (regend[mcnt]);
4655 /* If the regs structure we return has more elements than
4656 were in the pattern, set the extra elements to -1. If
4657 we (re)allocated the registers, this is the case,
4658 because we always allocate enough to have at least one
4660 for (mcnt = num_regs; mcnt < regs->num_regs; mcnt++)
4661 regs->start[mcnt] = regs->end[mcnt] = -1;
4662 } /* regs && !bufp->no_sub */
4664 DEBUG_PRINT4 ("%u failure points pushed, %u popped (%u remain).\n",
4665 nfailure_points_pushed, nfailure_points_popped,
4666 nfailure_points_pushed - nfailure_points_popped);
4667 DEBUG_PRINT2 ("%u registers pushed.\n", num_regs_pushed);
4669 mcnt = d - pos - (MATCHING_IN_FIRST_STRING
4673 DEBUG_PRINT2 ("Returning %d from re_match_2.\n", mcnt);
4679 /* Otherwise match next pattern command. */
4680 switch (SWITCH_ENUM_CAST ((re_opcode_t) *p++))
4682 /* Ignore these. Used to ignore the n of succeed_n's which
4683 currently have n == 0. */
4685 DEBUG_PRINT1 ("EXECUTING no_op.\n");
4689 DEBUG_PRINT1 ("EXECUTING succeed.\n");
4692 /* Match the next n pattern characters exactly. The following
4693 byte in the pattern defines n, and the n bytes after that
4694 are the characters to match. */
4697 DEBUG_PRINT2 ("EXECUTING exactn %d.\n", mcnt);
4699 /* This is written out as an if-else so we don't waste time
4700 testing `translate' inside the loop. */
4701 if (TRANSLATE_P (translate))
4706 Emchar pat_ch, buf_ch;
4710 pat_ch = charptr_emchar (p);
4711 buf_ch = charptr_emchar (d);
4712 if (RE_TRANSLATE (buf_ch) != pat_ch)
4715 pat_len = charcount_to_bytecount (p, 1);
4720 #else /* not MULE */
4722 if ((unsigned char) RE_TRANSLATE (*d++) != *p++)
4734 if (*d++ != *p++) goto fail;
4738 SET_REGS_MATCHED ();
4742 /* Match any character except possibly a newline or a null. */
4744 DEBUG_PRINT1 ("EXECUTING anychar.\n");
4748 if ((!(bufp->syntax & RE_DOT_NEWLINE) && TRANSLATE (*d) == '\n')
4749 || (bufp->syntax & RE_DOT_NOT_NULL && TRANSLATE (*d) == '\000'))
4752 SET_REGS_MATCHED ();
4753 DEBUG_PRINT2 (" Matched `%d'.\n", *d);
4754 INC_CHARPTR (d); /* XEmacs change */
4761 REGISTER unsigned char c;
4762 boolean not_p = (re_opcode_t) *(p - 1) == charset_not;
4764 DEBUG_PRINT2 ("EXECUTING charset%s.\n", not_p ? "_not" : "");
4767 c = TRANSLATE (*d); /* The character to match. */
4769 /* Cast to `unsigned' instead of `unsigned char' in case the
4770 bit list is a full 32 bytes long. */
4771 if (c < (unsigned) (*p * BYTEWIDTH)
4772 && p[1 + c / BYTEWIDTH] & (1 << (c % BYTEWIDTH)))
4777 if (!not_p) goto fail;
4779 SET_REGS_MATCHED ();
4780 INC_CHARPTR (d); /* XEmacs change */
4786 case charset_mule_not:
4789 boolean not_p = (re_opcode_t) *(p - 1) == charset_mule_not;
4791 DEBUG_PRINT2 ("EXECUTING charset_mule%s.\n", not_p ? "_not" : "");
4794 c = charptr_emchar ((const Bufbyte *) d);
4795 c = TRANSLATE_EXTENDED_UNSAFE (c); /* The character to match. */
4797 if (EQ (Qt, unified_range_table_lookup (p, c, Qnil)))
4800 p += unified_range_table_bytes_used (p);
4802 if (!not_p) goto fail;
4804 SET_REGS_MATCHED ();
4811 /* The beginning of a group is represented by start_memory.
4812 The arguments are the register number in the next byte, and the
4813 number of groups inner to this one in the next. The text
4814 matched within the group is recorded (in the internal
4815 registers data structure) under the register number. */
4817 DEBUG_PRINT3 ("EXECUTING start_memory %d (%d):\n", *p, p[1]);
4819 /* Find out if this group can match the empty string. */
4820 p1 = p; /* To send to group_match_null_string_p. */
4822 if (REG_MATCH_NULL_STRING_P (reg_info[*p]) == MATCH_NULL_UNSET_VALUE)
4823 REG_MATCH_NULL_STRING_P (reg_info[*p])
4824 = group_match_null_string_p (&p1, pend, reg_info);
4826 /* Save the position in the string where we were the last time
4827 we were at this open-group operator in case the group is
4828 operated upon by a repetition operator, e.g., with `(a*)*b'
4829 against `ab'; then we want to ignore where we are now in
4830 the string in case this attempt to match fails. */
4831 old_regstart[*p] = REG_MATCH_NULL_STRING_P (reg_info[*p])
4832 ? REG_UNSET (regstart[*p]) ? d : regstart[*p]
4834 DEBUG_PRINT2 (" old_regstart: %d\n",
4835 POINTER_TO_OFFSET (old_regstart[*p]));
4838 DEBUG_PRINT2 (" regstart: %d\n", POINTER_TO_OFFSET (regstart[*p]));
4840 IS_ACTIVE (reg_info[*p]) = 1;
4841 MATCHED_SOMETHING (reg_info[*p]) = 0;
4843 /* Clear this whenever we change the register activity status. */
4844 set_regs_matched_done = 0;
4846 /* This is the new highest active register. */
4847 highest_active_reg = *p;
4849 /* If nothing was active before, this is the new lowest active
4851 if (lowest_active_reg == NO_LOWEST_ACTIVE_REG)
4852 lowest_active_reg = *p;
4854 /* Move past the register number and inner group count. */
4856 just_past_start_mem = p;
4861 /* The stop_memory opcode represents the end of a group. Its
4862 arguments are the same as start_memory's: the register
4863 number, and the number of inner groups. */
4865 DEBUG_PRINT3 ("EXECUTING stop_memory %d (%d):\n", *p, p[1]);
4867 /* We need to save the string position the last time we were at
4868 this close-group operator in case the group is operated
4869 upon by a repetition operator, e.g., with `((a*)*(b*)*)*'
4870 against `aba'; then we want to ignore where we are now in
4871 the string in case this attempt to match fails. */
4872 old_regend[*p] = REG_MATCH_NULL_STRING_P (reg_info[*p])
4873 ? REG_UNSET (regend[*p]) ? d : regend[*p]
4875 DEBUG_PRINT2 (" old_regend: %d\n",
4876 POINTER_TO_OFFSET (old_regend[*p]));
4879 DEBUG_PRINT2 (" regend: %d\n", POINTER_TO_OFFSET (regend[*p]));
4881 /* This register isn't active anymore. */
4882 IS_ACTIVE (reg_info[*p]) = 0;
4884 /* Clear this whenever we change the register activity status. */
4885 set_regs_matched_done = 0;
4887 /* If this was the only register active, nothing is active
4889 if (lowest_active_reg == highest_active_reg)
4891 lowest_active_reg = NO_LOWEST_ACTIVE_REG;
4892 highest_active_reg = NO_HIGHEST_ACTIVE_REG;
4895 { /* We must scan for the new highest active register, since
4896 it isn't necessarily one less than now: consider
4897 (a(b)c(d(e)f)g). When group 3 ends, after the f), the
4898 new highest active register is 1. */
4899 unsigned char r = *p - 1;
4900 while (r > 0 && !IS_ACTIVE (reg_info[r]))
4903 /* If we end up at register zero, that means that we saved
4904 the registers as the result of an `on_failure_jump', not
4905 a `start_memory', and we jumped to past the innermost
4906 `stop_memory'. For example, in ((.)*) we save
4907 registers 1 and 2 as a result of the *, but when we pop
4908 back to the second ), we are at the stop_memory 1.
4909 Thus, nothing is active. */
4912 lowest_active_reg = NO_LOWEST_ACTIVE_REG;
4913 highest_active_reg = NO_HIGHEST_ACTIVE_REG;
4917 highest_active_reg = r;
4919 /* 98/9/21 jhod: We've also gotta set lowest_active_reg, don't we? */
4921 while (r < highest_active_reg && !IS_ACTIVE(reg_info[r]))
4923 lowest_active_reg = r;
4927 /* If just failed to match something this time around with a
4928 group that's operated on by a repetition operator, try to
4929 force exit from the ``loop'', and restore the register
4930 information for this group that we had before trying this
4932 if ((!MATCHED_SOMETHING (reg_info[*p])
4933 || just_past_start_mem == p - 1)
4936 boolean is_a_jump_n = false;
4940 switch ((re_opcode_t) *p1++)
4944 case pop_failure_jump:
4945 case maybe_pop_jump:
4947 case dummy_failure_jump:
4948 EXTRACT_NUMBER_AND_INCR (mcnt, p1);
4958 /* If the next operation is a jump backwards in the pattern
4959 to an on_failure_jump right before the start_memory
4960 corresponding to this stop_memory, exit from the loop
4961 by forcing a failure after pushing on the stack the
4962 on_failure_jump's jump in the pattern, and d. */
4963 if (mcnt < 0 && (re_opcode_t) *p1 == on_failure_jump
4964 && (re_opcode_t) p1[3] == start_memory && p1[4] == *p)
4966 /* If this group ever matched anything, then restore
4967 what its registers were before trying this last
4968 failed match, e.g., with `(a*)*b' against `ab' for
4969 regstart[1], and, e.g., with `((a*)*(b*)*)*'
4970 against `aba' for regend[3].
4972 Also restore the registers for inner groups for,
4973 e.g., `((a*)(b*))*' against `aba' (register 3 would
4974 otherwise get trashed). */
4976 if (EVER_MATCHED_SOMETHING (reg_info[*p]))
4980 EVER_MATCHED_SOMETHING (reg_info[*p]) = 0;
4982 /* Restore this and inner groups' (if any) registers. */
4983 for (r = *p; r < *p + *(p + 1); r++)
4985 regstart[r] = old_regstart[r];
4987 /* xx why this test? */
4988 if (old_regend[r] >= regstart[r])
4989 regend[r] = old_regend[r];
4993 EXTRACT_NUMBER_AND_INCR (mcnt, p1);
4994 PUSH_FAILURE_POINT (p1 + mcnt, d, -2);
5000 /* Move past the register number and the inner group count. */
5005 /* \<digit> has been turned into a `duplicate' command which is
5006 followed by the numeric value of <digit> as the register number. */
5009 REGISTER re_char *d2, *dend2;
5010 int regno = *p++; /* Get which register to match against. */
5011 DEBUG_PRINT2 ("EXECUTING duplicate %d.\n", regno);
5013 /* Can't back reference a group which we've never matched. */
5014 if (REG_UNSET (regstart[regno]) || REG_UNSET (regend[regno]))
5017 /* Where in input to try to start matching. */
5018 d2 = regstart[regno];
5020 /* Where to stop matching; if both the place to start and
5021 the place to stop matching are in the same string, then
5022 set to the place to stop, otherwise, for now have to use
5023 the end of the first string. */
5025 dend2 = ((FIRST_STRING_P (regstart[regno])
5026 == FIRST_STRING_P (regend[regno]))
5027 ? regend[regno] : end_match_1);
5030 /* If necessary, advance to next segment in register
5034 if (dend2 == end_match_2) break;
5035 if (dend2 == regend[regno]) break;
5037 /* End of string1 => advance to string2. */
5039 dend2 = regend[regno];
5041 /* At end of register contents => success */
5042 if (d2 == dend2) break;
5044 /* If necessary, advance to next segment in data. */
5047 /* How many characters left in this segment to match. */
5050 /* Want how many consecutive characters we can match in
5051 one shot, so, if necessary, adjust the count. */
5052 if (mcnt > dend2 - d2)
5055 /* Compare that many; failure if mismatch, else move
5057 if (TRANSLATE_P (translate)
5058 ? bcmp_translate ((unsigned char *) d,
5059 (unsigned char *) d2, mcnt, translate)
5060 : memcmp (d, d2, mcnt))
5062 d += mcnt, d2 += mcnt;
5064 /* Do this because we've match some characters. */
5065 SET_REGS_MATCHED ();
5071 /* begline matches the empty string at the beginning of the string
5072 (unless `not_bol' is set in `bufp'), and, if
5073 `newline_anchor' is set, after newlines. */
5075 DEBUG_PRINT1 ("EXECUTING begline.\n");
5077 if (AT_STRINGS_BEG (d))
5079 if (!bufp->not_bol) break;
5081 else if (d[-1] == '\n' && bufp->newline_anchor)
5085 /* In all other cases, we fail. */
5089 /* endline is the dual of begline. */
5091 DEBUG_PRINT1 ("EXECUTING endline.\n");
5093 if (AT_STRINGS_END (d))
5095 if (!bufp->not_eol) break;
5098 /* We have to ``prefetch'' the next character. */
5099 else if ((d == end1 ? *string2 : *d) == '\n'
5100 && bufp->newline_anchor)
5107 /* Match at the very beginning of the data. */
5109 DEBUG_PRINT1 ("EXECUTING begbuf.\n");
5110 if (AT_STRINGS_BEG (d))
5115 /* Match at the very end of the data. */
5117 DEBUG_PRINT1 ("EXECUTING endbuf.\n");
5118 if (AT_STRINGS_END (d))
5123 /* on_failure_keep_string_jump is used to optimize `.*\n'. It
5124 pushes NULL as the value for the string on the stack. Then
5125 `pop_failure_point' will keep the current value for the
5126 string, instead of restoring it. To see why, consider
5127 matching `foo\nbar' against `.*\n'. The .* matches the foo;
5128 then the . fails against the \n. But the next thing we want
5129 to do is match the \n against the \n; if we restored the
5130 string value, we would be back at the foo.
5132 Because this is used only in specific cases, we don't need to
5133 check all the things that `on_failure_jump' does, to make
5134 sure the right things get saved on the stack. Hence we don't
5135 share its code. The only reason to push anything on the
5136 stack at all is that otherwise we would have to change
5137 `anychar's code to do something besides goto fail in this
5138 case; that seems worse than this. */
5139 case on_failure_keep_string_jump:
5140 DEBUG_PRINT1 ("EXECUTING on_failure_keep_string_jump");
5142 EXTRACT_NUMBER_AND_INCR (mcnt, p);
5143 DEBUG_PRINT3 (" %d (to 0x%lx):\n", mcnt, (long) (p + mcnt));
5145 PUSH_FAILURE_POINT (p + mcnt, (unsigned char *) 0, -2);
5149 /* Uses of on_failure_jump:
5151 Each alternative starts with an on_failure_jump that points
5152 to the beginning of the next alternative. Each alternative
5153 except the last ends with a jump that in effect jumps past
5154 the rest of the alternatives. (They really jump to the
5155 ending jump of the following alternative, because tensioning
5156 these jumps is a hassle.)
5158 Repeats start with an on_failure_jump that points past both
5159 the repetition text and either the following jump or
5160 pop_failure_jump back to this on_failure_jump. */
5161 case on_failure_jump:
5163 DEBUG_PRINT1 ("EXECUTING on_failure_jump");
5165 EXTRACT_NUMBER_AND_INCR (mcnt, p);
5166 DEBUG_PRINT3 (" %d (to 0x%lx)", mcnt, (long) (p + mcnt));
5168 /* If this on_failure_jump comes right before a group (i.e.,
5169 the original * applied to a group), save the information
5170 for that group and all inner ones, so that if we fail back
5171 to this point, the group's information will be correct.
5172 For example, in \(a*\)*\1, we need the preceding group,
5173 and in \(\(a*\)b*\)\2, we need the inner group. */
5175 /* We can't use `p' to check ahead because we push
5176 a failure point to `p + mcnt' after we do this. */
5179 /* We need to skip no_op's before we look for the
5180 start_memory in case this on_failure_jump is happening as
5181 the result of a completed succeed_n, as in \(a\)\{1,3\}b\1
5183 while (p1 < pend && (re_opcode_t) *p1 == no_op)
5186 if (p1 < pend && (re_opcode_t) *p1 == start_memory)
5188 /* We have a new highest active register now. This will
5189 get reset at the start_memory we are about to get to,
5190 but we will have saved all the registers relevant to
5191 this repetition op, as described above. */
5192 highest_active_reg = *(p1 + 1) + *(p1 + 2);
5193 if (lowest_active_reg == NO_LOWEST_ACTIVE_REG)
5194 lowest_active_reg = *(p1 + 1);
5197 DEBUG_PRINT1 (":\n");
5198 PUSH_FAILURE_POINT (p + mcnt, d, -2);
5202 /* A smart repeat ends with `maybe_pop_jump'.
5203 We change it to either `pop_failure_jump' or `jump'. */
5204 case maybe_pop_jump:
5205 EXTRACT_NUMBER_AND_INCR (mcnt, p);
5206 DEBUG_PRINT2 ("EXECUTING maybe_pop_jump %d.\n", mcnt);
5208 REGISTER unsigned char *p2 = p;
5210 /* Compare the beginning of the repeat with what in the
5211 pattern follows its end. If we can establish that there
5212 is nothing that they would both match, i.e., that we
5213 would have to backtrack because of (as in, e.g., `a*a')
5214 then we can change to pop_failure_jump, because we'll
5215 never have to backtrack.
5217 This is not true in the case of alternatives: in
5218 `(a|ab)*' we do need to backtrack to the `ab' alternative
5219 (e.g., if the string was `ab'). But instead of trying to
5220 detect that here, the alternative has put on a dummy
5221 failure point which is what we will end up popping. */
5223 /* Skip over open/close-group commands.
5224 If what follows this loop is a ...+ construct,
5225 look at what begins its body, since we will have to
5226 match at least one of that. */
5230 && ((re_opcode_t) *p2 == stop_memory
5231 || (re_opcode_t) *p2 == start_memory))
5233 else if (p2 + 6 < pend
5234 && (re_opcode_t) *p2 == dummy_failure_jump)
5241 /* p1[0] ... p1[2] are the `on_failure_jump' corresponding
5242 to the `maybe_finalize_jump' of this case. Examine what
5245 /* If we're at the end of the pattern, we can change. */
5248 /* Consider what happens when matching ":\(.*\)"
5249 against ":/". I don't really understand this code
5251 p[-3] = (unsigned char) pop_failure_jump;
5253 (" End of pattern: change to `pop_failure_jump'.\n");
5256 else if ((re_opcode_t) *p2 == exactn
5257 || (bufp->newline_anchor && (re_opcode_t) *p2 == endline))
5259 REGISTER unsigned char c
5260 = *p2 == (unsigned char) endline ? '\n' : p2[2];
5262 if ((re_opcode_t) p1[3] == exactn && p1[5] != c)
5264 p[-3] = (unsigned char) pop_failure_jump;
5265 DEBUG_PRINT3 (" %c != %c => pop_failure_jump.\n",
5269 else if ((re_opcode_t) p1[3] == charset
5270 || (re_opcode_t) p1[3] == charset_not)
5272 int not_p = (re_opcode_t) p1[3] == charset_not;
5274 if (c < (unsigned char) (p1[4] * BYTEWIDTH)
5275 && p1[5 + c / BYTEWIDTH] & (1 << (c % BYTEWIDTH)))
5278 /* `not_p' is equal to 1 if c would match, which means
5279 that we can't change to pop_failure_jump. */
5282 p[-3] = (unsigned char) pop_failure_jump;
5283 DEBUG_PRINT1 (" No match => pop_failure_jump.\n");
5287 else if ((re_opcode_t) *p2 == charset)
5290 REGISTER unsigned char c
5291 = *p2 == (unsigned char) endline ? '\n' : p2[2];
5294 if ((re_opcode_t) p1[3] == exactn
5295 && ! ((int) p2[1] * BYTEWIDTH > (int) p1[5]
5296 && (p2[2 + p1[5] / BYTEWIDTH]
5297 & (1 << (p1[5] % BYTEWIDTH)))))
5299 p[-3] = (unsigned char) pop_failure_jump;
5300 DEBUG_PRINT3 (" %c != %c => pop_failure_jump.\n",
5304 else if ((re_opcode_t) p1[3] == charset_not)
5307 /* We win if the charset_not inside the loop
5308 lists every character listed in the charset after. */
5309 for (idx = 0; idx < (int) p2[1]; idx++)
5310 if (! (p2[2 + idx] == 0
5311 || (idx < (int) p1[4]
5312 && ((p2[2 + idx] & ~ p1[5 + idx]) == 0))))
5317 p[-3] = (unsigned char) pop_failure_jump;
5318 DEBUG_PRINT1 (" No match => pop_failure_jump.\n");
5321 else if ((re_opcode_t) p1[3] == charset)
5324 /* We win if the charset inside the loop
5325 has no overlap with the one after the loop. */
5327 idx < (int) p2[1] && idx < (int) p1[4];
5329 if ((p2[2 + idx] & p1[5 + idx]) != 0)
5332 if (idx == p2[1] || idx == p1[4])
5334 p[-3] = (unsigned char) pop_failure_jump;
5335 DEBUG_PRINT1 (" No match => pop_failure_jump.\n");
5340 p -= 2; /* Point at relative address again. */
5341 if ((re_opcode_t) p[-1] != pop_failure_jump)
5343 p[-1] = (unsigned char) jump;
5344 DEBUG_PRINT1 (" Match => jump.\n");
5345 goto unconditional_jump;
5347 /* Note fall through. */
5350 /* The end of a simple repeat has a pop_failure_jump back to
5351 its matching on_failure_jump, where the latter will push a
5352 failure point. The pop_failure_jump takes off failure
5353 points put on by this pop_failure_jump's matching
5354 on_failure_jump; we got through the pattern to here from the
5355 matching on_failure_jump, so didn't fail. */
5356 case pop_failure_jump:
5358 /* We need to pass separate storage for the lowest and
5359 highest registers, even though we don't care about the
5360 actual values. Otherwise, we will restore only one
5361 register from the stack, since lowest will == highest in
5362 `pop_failure_point'. */
5363 unsigned dummy_low_reg, dummy_high_reg;
5364 unsigned char *pdummy;
5365 re_char *sdummy = NULL;
5367 DEBUG_PRINT1 ("EXECUTING pop_failure_jump.\n");
5368 POP_FAILURE_POINT (sdummy, pdummy,
5369 dummy_low_reg, dummy_high_reg,
5370 reg_dummy, reg_dummy, reg_info_dummy);
5372 /* Note fall through. */
5375 /* Unconditionally jump (without popping any failure points). */
5378 EXTRACT_NUMBER_AND_INCR (mcnt, p); /* Get the amount to jump. */
5379 DEBUG_PRINT2 ("EXECUTING jump %d ", mcnt);
5380 p += mcnt; /* Do the jump. */
5381 DEBUG_PRINT2 ("(to 0x%lx).\n", (long) p);
5385 /* We need this opcode so we can detect where alternatives end
5386 in `group_match_null_string_p' et al. */
5388 DEBUG_PRINT1 ("EXECUTING jump_past_alt.\n");
5389 goto unconditional_jump;
5392 /* Normally, the on_failure_jump pushes a failure point, which
5393 then gets popped at pop_failure_jump. We will end up at
5394 pop_failure_jump, also, and with a pattern of, say, `a+', we
5395 are skipping over the on_failure_jump, so we have to push
5396 something meaningless for pop_failure_jump to pop. */
5397 case dummy_failure_jump:
5398 DEBUG_PRINT1 ("EXECUTING dummy_failure_jump.\n");
5399 /* It doesn't matter what we push for the string here. What
5400 the code at `fail' tests is the value for the pattern. */
5401 PUSH_FAILURE_POINT ((unsigned char *) 0, (unsigned char *) 0, -2);
5402 goto unconditional_jump;
5405 /* At the end of an alternative, we need to push a dummy failure
5406 point in case we are followed by a `pop_failure_jump', because
5407 we don't want the failure point for the alternative to be
5408 popped. For example, matching `(a|ab)*' against `aab'
5409 requires that we match the `ab' alternative. */
5410 case push_dummy_failure:
5411 DEBUG_PRINT1 ("EXECUTING push_dummy_failure.\n");
5412 /* See comments just above at `dummy_failure_jump' about the
5414 PUSH_FAILURE_POINT ((unsigned char *) 0, (unsigned char *) 0, -2);
5417 /* Have to succeed matching what follows at least n times.
5418 After that, handle like `on_failure_jump'. */
5420 EXTRACT_NUMBER (mcnt, p + 2);
5421 DEBUG_PRINT2 ("EXECUTING succeed_n %d.\n", mcnt);
5424 /* Originally, this is how many times we HAVE to succeed. */
5429 STORE_NUMBER_AND_INCR (p, mcnt);
5430 DEBUG_PRINT3 (" Setting 0x%lx to %d.\n", (long) p, mcnt);
5434 DEBUG_PRINT2 (" Setting two bytes from 0x%lx to no_op.\n",
5436 p[2] = (unsigned char) no_op;
5437 p[3] = (unsigned char) no_op;
5443 EXTRACT_NUMBER (mcnt, p + 2);
5444 DEBUG_PRINT2 ("EXECUTING jump_n %d.\n", mcnt);
5446 /* Originally, this is how many times we CAN jump. */
5450 STORE_NUMBER (p + 2, mcnt);
5451 goto unconditional_jump;
5453 /* If don't have to jump any more, skip over the rest of command. */
5460 DEBUG_PRINT1 ("EXECUTING set_number_at.\n");
5462 EXTRACT_NUMBER_AND_INCR (mcnt, p);
5464 EXTRACT_NUMBER_AND_INCR (mcnt, p);
5465 DEBUG_PRINT3 (" Setting 0x%lx to %d.\n", (long) p1, mcnt);
5466 STORE_NUMBER (p1, mcnt);
5471 DEBUG_PRINT1 ("EXECUTING wordbound.\n");
5477 if (AT_STRINGS_BEG (d) || AT_STRINGS_END (d))
5481 const unsigned char *d_before =
5482 (const unsigned char *) POS_BEFORE_GAP_UNSAFE (d);
5483 const unsigned char *d_after =
5484 (const unsigned char *) POS_AFTER_GAP_UNSAFE (d);
5485 Emchar emch1, emch2;
5487 DEC_CHARPTR (d_before);
5488 emch1 = charptr_emchar (d_before);
5489 emch2 = charptr_emchar (d_after);
5490 result = (WORDCHAR_P_UNSAFE (emch1) !=
5491 WORDCHAR_P_UNSAFE (emch2));
5493 if (result == should_succeed)
5499 DEBUG_PRINT1 ("EXECUTING notwordbound.\n");
5501 goto matchwordbound;
5504 DEBUG_PRINT1 ("EXECUTING wordbeg.\n");
5506 /* XEmacs: this originally read:
5508 if (WORDCHAR_P (d) && (AT_STRINGS_BEG (d) || !WORDCHAR_P (d - 1)))
5512 const unsigned char *dtmp =
5513 (const unsigned char *) POS_AFTER_GAP_UNSAFE (d);
5514 Emchar emch = charptr_emchar (dtmp);
5515 if (!WORDCHAR_P_UNSAFE (emch))
5517 if (AT_STRINGS_BEG (d))
5519 dtmp = (const unsigned char *) POS_BEFORE_GAP_UNSAFE (d);
5521 emch = charptr_emchar (dtmp);
5522 if (!WORDCHAR_P_UNSAFE (emch))
5528 DEBUG_PRINT1 ("EXECUTING wordend.\n");
5530 /* XEmacs: this originally read:
5532 if (!AT_STRINGS_BEG (d) && WORDCHAR_P (d - 1)
5533 && (!WORDCHAR_P (d) || AT_STRINGS_END (d)))
5536 The or condition is incorrect (reversed).
5538 const unsigned char *dtmp;
5540 if (AT_STRINGS_BEG (d))
5542 dtmp = (const unsigned char *) POS_BEFORE_GAP_UNSAFE (d);
5544 emch = charptr_emchar (dtmp);
5545 if (!WORDCHAR_P_UNSAFE (emch))
5547 if (AT_STRINGS_END (d))
5549 dtmp = (const unsigned char *) POS_AFTER_GAP_UNSAFE (d);
5550 emch = charptr_emchar (dtmp);
5551 if (!WORDCHAR_P_UNSAFE (emch))
5558 DEBUG_PRINT1 ("EXECUTING before_dot.\n");
5559 if (!regex_emacs_buffer_p
5560 || (BUF_PTR_BYTE_POS (regex_emacs_buffer, (unsigned char *) d)
5561 >= BUF_PT (regex_emacs_buffer)))
5566 DEBUG_PRINT1 ("EXECUTING at_dot.\n");
5567 if (!regex_emacs_buffer_p
5568 || (BUF_PTR_BYTE_POS (regex_emacs_buffer, (unsigned char *) d)
5569 != BUF_PT (regex_emacs_buffer)))
5574 DEBUG_PRINT1 ("EXECUTING after_dot.\n");
5575 if (!regex_emacs_buffer_p
5576 || (BUF_PTR_BYTE_POS (regex_emacs_buffer, (unsigned char *) d)
5577 <= BUF_PT (regex_emacs_buffer)))
5580 #if 0 /* not emacs19 */
5582 DEBUG_PRINT1 ("EXECUTING at_dot.\n");
5583 if (BUF_PTR_BYTE_POS (regex_emacs_buffer, (unsigned char *) d) + 1
5584 != BUF_PT (regex_emacs_buffer))
5587 #endif /* not emacs19 */
5590 DEBUG_PRINT2 ("EXECUTING syntaxspec %d.\n", mcnt);
5595 DEBUG_PRINT1 ("EXECUTING Emacs wordchar.\n");
5605 emch = charptr_emchar ((const Bufbyte *) d);
5606 matches = (SYNTAX_UNSAFE
5607 (XCHAR_TABLE (regex_emacs_buffer->mirror_syntax_table),
5608 emch) == (enum syntaxcode) mcnt);
5610 if (matches != should_succeed)
5612 SET_REGS_MATCHED ();
5617 DEBUG_PRINT2 ("EXECUTING notsyntaxspec %d.\n", mcnt);
5619 goto matchnotsyntax;
5622 DEBUG_PRINT1 ("EXECUTING Emacs notwordchar.\n");
5626 goto matchornotsyntax;
5629 /* 97/2/17 jhod Mule category code patch */
5638 emch = charptr_emchar ((const Bufbyte *) d);
5640 if (check_category_char(emch, regex_emacs_buffer->category_table,
5641 mcnt, should_succeed))
5643 SET_REGS_MATCHED ();
5647 case notcategoryspec:
5649 goto matchornotcategory;
5650 /* end of category patch */
5652 #else /* not emacs */
5654 DEBUG_PRINT1 ("EXECUTING non-Emacs wordchar.\n");
5656 if (!WORDCHAR_P_UNSAFE ((int) (*d)))
5658 SET_REGS_MATCHED ();
5663 DEBUG_PRINT1 ("EXECUTING non-Emacs notwordchar.\n");
5665 if (!WORDCHAR_P_UNSAFE ((int) (*d)))
5667 SET_REGS_MATCHED ();
5675 continue; /* Successfully executed one pattern command; keep going. */
5678 /* We goto here if a matching operation fails. */
5680 if (!FAIL_STACK_EMPTY ())
5681 { /* A restart point is known. Restore to that state. */
5682 DEBUG_PRINT1 ("\nFAIL:\n");
5683 POP_FAILURE_POINT (d, p,
5684 lowest_active_reg, highest_active_reg,
5685 regstart, regend, reg_info);
5687 /* If this failure point is a dummy, try the next one. */
5691 /* If we failed to the end of the pattern, don't examine *p. */
5695 boolean is_a_jump_n = false;
5697 /* If failed to a backwards jump that's part of a repetition
5698 loop, need to pop this failure point and use the next one. */
5699 switch ((re_opcode_t) *p)
5703 case maybe_pop_jump:
5704 case pop_failure_jump:
5707 EXTRACT_NUMBER_AND_INCR (mcnt, p1);
5710 if ((is_a_jump_n && (re_opcode_t) *p1 == succeed_n)
5712 && (re_opcode_t) *p1 == on_failure_jump))
5720 if (d >= string1 && d <= end1)
5724 break; /* Matching at this starting point really fails. */
5728 goto restore_best_regs;
5732 return -1; /* Failure to match. */
5735 /* Subroutine definitions for re_match_2. */
5738 /* We are passed P pointing to a register number after a start_memory.
5740 Return true if the pattern up to the corresponding stop_memory can
5741 match the empty string, and false otherwise.
5743 If we find the matching stop_memory, sets P to point to one past its number.
5744 Otherwise, sets P to an undefined byte less than or equal to END.
5746 We don't handle duplicates properly (yet). */
5749 group_match_null_string_p (unsigned char **p, unsigned char *end,
5750 register_info_type *reg_info)
5753 /* Point to after the args to the start_memory. */
5754 unsigned char *p1 = *p + 2;
5758 /* Skip over opcodes that can match nothing, and return true or
5759 false, as appropriate, when we get to one that can't, or to the
5760 matching stop_memory. */
5762 switch ((re_opcode_t) *p1)
5764 /* Could be either a loop or a series of alternatives. */
5765 case on_failure_jump:
5767 EXTRACT_NUMBER_AND_INCR (mcnt, p1);
5769 /* If the next operation is not a jump backwards in the
5774 /* Go through the on_failure_jumps of the alternatives,
5775 seeing if any of the alternatives cannot match nothing.
5776 The last alternative starts with only a jump,
5777 whereas the rest start with on_failure_jump and end
5778 with a jump, e.g., here is the pattern for `a|b|c':
5780 /on_failure_jump/0/6/exactn/1/a/jump_past_alt/0/6
5781 /on_failure_jump/0/6/exactn/1/b/jump_past_alt/0/3
5784 So, we have to first go through the first (n-1)
5785 alternatives and then deal with the last one separately. */
5788 /* Deal with the first (n-1) alternatives, which start
5789 with an on_failure_jump (see above) that jumps to right
5790 past a jump_past_alt. */
5792 while ((re_opcode_t) p1[mcnt-3] == jump_past_alt)
5794 /* `mcnt' holds how many bytes long the alternative
5795 is, including the ending `jump_past_alt' and
5798 if (!alt_match_null_string_p (p1, p1 + mcnt - 3,
5802 /* Move to right after this alternative, including the
5806 /* Break if it's the beginning of an n-th alternative
5807 that doesn't begin with an on_failure_jump. */
5808 if ((re_opcode_t) *p1 != on_failure_jump)
5811 /* Still have to check that it's not an n-th
5812 alternative that starts with an on_failure_jump. */
5814 EXTRACT_NUMBER_AND_INCR (mcnt, p1);
5815 if ((re_opcode_t) p1[mcnt-3] != jump_past_alt)
5817 /* Get to the beginning of the n-th alternative. */
5823 /* Deal with the last alternative: go back and get number
5824 of the `jump_past_alt' just before it. `mcnt' contains
5825 the length of the alternative. */
5826 EXTRACT_NUMBER (mcnt, p1 - 2);
5828 if (!alt_match_null_string_p (p1, p1 + mcnt, reg_info))
5831 p1 += mcnt; /* Get past the n-th alternative. */
5837 assert (p1[1] == **p);
5843 if (!common_op_match_null_string_p (&p1, end, reg_info))
5846 } /* while p1 < end */
5849 } /* group_match_null_string_p */
5852 /* Similar to group_match_null_string_p, but doesn't deal with alternatives:
5853 It expects P to be the first byte of a single alternative and END one
5854 byte past the last. The alternative can contain groups. */
5857 alt_match_null_string_p (unsigned char *p, unsigned char *end,
5858 register_info_type *reg_info)
5861 unsigned char *p1 = p;
5865 /* Skip over opcodes that can match nothing, and break when we get
5866 to one that can't. */
5868 switch ((re_opcode_t) *p1)
5871 case on_failure_jump:
5873 EXTRACT_NUMBER_AND_INCR (mcnt, p1);
5878 if (!common_op_match_null_string_p (&p1, end, reg_info))
5881 } /* while p1 < end */
5884 } /* alt_match_null_string_p */
5887 /* Deals with the ops common to group_match_null_string_p and
5888 alt_match_null_string_p.
5890 Sets P to one after the op and its arguments, if any. */
5893 common_op_match_null_string_p (unsigned char **p, unsigned char *end,
5894 register_info_type *reg_info)
5899 unsigned char *p1 = *p;
5901 switch ((re_opcode_t) *p1++)
5921 assert (reg_no > 0 && reg_no <= MAX_REGNUM);
5922 ret = group_match_null_string_p (&p1, end, reg_info);
5924 /* Have to set this here in case we're checking a group which
5925 contains a group and a back reference to it. */
5927 if (REG_MATCH_NULL_STRING_P (reg_info[reg_no]) == MATCH_NULL_UNSET_VALUE)
5928 REG_MATCH_NULL_STRING_P (reg_info[reg_no]) = ret;
5934 /* If this is an optimized succeed_n for zero times, make the jump. */
5936 EXTRACT_NUMBER_AND_INCR (mcnt, p1);
5944 /* Get to the number of times to succeed. */
5946 EXTRACT_NUMBER_AND_INCR (mcnt, p1);
5951 EXTRACT_NUMBER_AND_INCR (mcnt, p1);
5959 if (!REG_MATCH_NULL_STRING_P (reg_info[*p1]))
5967 /* All other opcodes mean we cannot match the empty string. */
5973 } /* common_op_match_null_string_p */
5976 /* Return zero if TRANSLATE[S1] and TRANSLATE[S2] are identical for LEN
5977 bytes; nonzero otherwise. */
5980 bcmp_translate (re_char *s1, re_char *s2,
5981 REGISTER int len, RE_TRANSLATE_TYPE translate)
5983 REGISTER const unsigned char *p1 = s1, *p2 = s2;
5985 const unsigned char *p1_end = s1 + len;
5986 const unsigned char *p2_end = s2 + len;
5988 while (p1 != p1_end && p2 != p2_end)
5990 Emchar p1_ch, p2_ch;
5992 p1_ch = charptr_emchar (p1);
5993 p2_ch = charptr_emchar (p2);
5995 if (RE_TRANSLATE (p1_ch)
5996 != RE_TRANSLATE (p2_ch))
6001 #else /* not MULE */
6004 if (RE_TRANSLATE (*p1++) != RE_TRANSLATE (*p2++)) return 1;
6011 /* Entry points for GNU code. */
6013 /* re_compile_pattern is the GNU regular expression compiler: it
6014 compiles PATTERN (of length SIZE) and puts the result in BUFP.
6015 Returns 0 if the pattern was valid, otherwise an error string.
6017 Assumes the `allocated' (and perhaps `buffer') and `translate' fields
6018 are set in BUFP on entry.
6020 We call regex_compile to do the actual compilation. */
6023 re_compile_pattern (const char *pattern, int length,
6024 struct re_pattern_buffer *bufp)
6028 /* GNU code is written to assume at least RE_NREGS registers will be set
6029 (and at least one extra will be -1). */
6030 bufp->regs_allocated = REGS_UNALLOCATED;
6032 /* And GNU code determines whether or not to get register information
6033 by passing null for the REGS argument to re_match, etc., not by
6037 /* Match anchors at newline. */
6038 bufp->newline_anchor = 1;
6040 ret = regex_compile ((unsigned char *) pattern, length, re_syntax_options, bufp);
6044 return gettext (re_error_msgid[(int) ret]);
6047 /* Entry points compatible with 4.2 BSD regex library. We don't define
6048 them unless specifically requested. */
6050 #ifdef _REGEX_RE_COMP
6052 /* BSD has one and only one pattern buffer. */
6053 static struct re_pattern_buffer re_comp_buf;
6056 re_comp (const char *s)
6062 if (!re_comp_buf.buffer)
6063 return gettext ("No previous regular expression");
6067 if (!re_comp_buf.buffer)
6069 re_comp_buf.buffer = (unsigned char *) malloc (200);
6070 if (re_comp_buf.buffer == NULL)
6071 return gettext (re_error_msgid[(int) REG_ESPACE]);
6072 re_comp_buf.allocated = 200;
6074 re_comp_buf.fastmap = (char *) malloc (1 << BYTEWIDTH);
6075 if (re_comp_buf.fastmap == NULL)
6076 return gettext (re_error_msgid[(int) REG_ESPACE]);
6079 /* Since `re_exec' always passes NULL for the `regs' argument, we
6080 don't need to initialize the pattern buffer fields which affect it. */
6082 /* Match anchors at newlines. */
6083 re_comp_buf.newline_anchor = 1;
6085 ret = regex_compile ((unsigned char *)s, strlen (s), re_syntax_options, &re_comp_buf);
6090 /* Yes, we're discarding `const' here if !HAVE_LIBINTL. */
6091 return (char *) gettext (re_error_msgid[(int) ret]);
6096 re_exec (const char *s)
6098 const int len = strlen (s);
6100 0 <= re_search (&re_comp_buf, s, len, 0, len, (struct re_registers *) 0);
6102 #endif /* _REGEX_RE_COMP */
6104 /* POSIX.2 functions. Don't define these for Emacs. */
6108 /* regcomp takes a regular expression as a string and compiles it.
6110 PREG is a regex_t *. We do not expect any fields to be initialized,
6111 since POSIX says we shouldn't. Thus, we set
6113 `buffer' to the compiled pattern;
6114 `used' to the length of the compiled pattern;
6115 `syntax' to RE_SYNTAX_POSIX_EXTENDED if the
6116 REG_EXTENDED bit in CFLAGS is set; otherwise, to
6117 RE_SYNTAX_POSIX_BASIC;
6118 `newline_anchor' to REG_NEWLINE being set in CFLAGS;
6119 `fastmap' and `fastmap_accurate' to zero;
6120 `re_nsub' to the number of subexpressions in PATTERN.
6122 PATTERN is the address of the pattern string.
6124 CFLAGS is a series of bits which affect compilation.
6126 If REG_EXTENDED is set, we use POSIX extended syntax; otherwise, we
6127 use POSIX basic syntax.
6129 If REG_NEWLINE is set, then . and [^...] don't match newline.
6130 Also, regexec will try a match beginning after every newline.
6132 If REG_ICASE is set, then we considers upper- and lowercase
6133 versions of letters to be equivalent when matching.
6135 If REG_NOSUB is set, then when PREG is passed to regexec, that
6136 routine will report only success or failure, and nothing about the
6139 It returns 0 if it succeeds, nonzero if it doesn't. (See regex.h for
6140 the return codes and their meanings.) */
6143 regcomp (regex_t *preg, const char *pattern, int cflags)
6147 = (cflags & REG_EXTENDED) ?
6148 RE_SYNTAX_POSIX_EXTENDED : RE_SYNTAX_POSIX_BASIC;
6150 /* regex_compile will allocate the space for the compiled pattern. */
6152 preg->allocated = 0;
6155 /* Don't bother to use a fastmap when searching. This simplifies the
6156 REG_NEWLINE case: if we used a fastmap, we'd have to put all the
6157 characters after newlines into the fastmap. This way, we just try
6161 if (cflags & REG_ICASE)
6165 preg->translate = (char *) malloc (CHAR_SET_SIZE);
6166 if (preg->translate == NULL)
6167 return (int) REG_ESPACE;
6169 /* Map uppercase characters to corresponding lowercase ones. */
6170 for (i = 0; i < CHAR_SET_SIZE; i++)
6171 preg->translate[i] = ISUPPER (i) ? tolower (i) : i;
6174 preg->translate = NULL;
6176 /* If REG_NEWLINE is set, newlines are treated differently. */
6177 if (cflags & REG_NEWLINE)
6178 { /* REG_NEWLINE implies neither . nor [^...] match newline. */
6179 syntax &= ~RE_DOT_NEWLINE;
6180 syntax |= RE_HAT_LISTS_NOT_NEWLINE;
6181 /* It also changes the matching behavior. */
6182 preg->newline_anchor = 1;
6185 preg->newline_anchor = 0;
6187 preg->no_sub = !!(cflags & REG_NOSUB);
6189 /* POSIX says a null character in the pattern terminates it, so we
6190 can use strlen here in compiling the pattern. */
6191 ret = regex_compile ((unsigned char *) pattern, strlen (pattern), syntax, preg);
6193 /* POSIX doesn't distinguish between an unmatched open-group and an
6194 unmatched close-group: both are REG_EPAREN. */
6195 if (ret == REG_ERPAREN) ret = REG_EPAREN;
6201 /* regexec searches for a given pattern, specified by PREG, in the
6204 If NMATCH is zero or REG_NOSUB was set in the cflags argument to
6205 `regcomp', we ignore PMATCH. Otherwise, we assume PMATCH has at
6206 least NMATCH elements, and we set them to the offsets of the
6207 corresponding matched substrings.
6209 EFLAGS specifies `execution flags' which affect matching: if
6210 REG_NOTBOL is set, then ^ does not match at the beginning of the
6211 string; if REG_NOTEOL is set, then $ does not match at the end.
6213 We return 0 if we find a match and REG_NOMATCH if not. */
6216 regexec (const regex_t *preg, const char *string, size_t nmatch,
6217 regmatch_t pmatch[], int eflags)
6220 struct re_registers regs;
6221 regex_t private_preg;
6222 int len = strlen (string);
6223 boolean want_reg_info = !preg->no_sub && nmatch > 0;
6225 private_preg = *preg;
6227 private_preg.not_bol = !!(eflags & REG_NOTBOL);
6228 private_preg.not_eol = !!(eflags & REG_NOTEOL);
6230 /* The user has told us exactly how many registers to return
6231 information about, via `nmatch'. We have to pass that on to the
6232 matching routines. */
6233 private_preg.regs_allocated = REGS_FIXED;
6237 regs.num_regs = nmatch;
6238 regs.start = TALLOC (nmatch, regoff_t);
6239 regs.end = TALLOC (nmatch, regoff_t);
6240 if (regs.start == NULL || regs.end == NULL)
6241 return (int) REG_NOMATCH;
6244 /* Perform the searching operation. */
6245 ret = re_search (&private_preg, string, len,
6246 /* start: */ 0, /* range: */ len,
6247 want_reg_info ? ®s : (struct re_registers *) 0);
6249 /* Copy the register information to the POSIX structure. */
6256 for (r = 0; r < nmatch; r++)
6258 pmatch[r].rm_so = regs.start[r];
6259 pmatch[r].rm_eo = regs.end[r];
6263 /* If we needed the temporary register info, free the space now. */
6268 /* We want zero return to mean success, unlike `re_search'. */
6269 return ret >= 0 ? (int) REG_NOERROR : (int) REG_NOMATCH;
6273 /* Returns a message corresponding to an error code, ERRCODE, returned
6274 from either regcomp or regexec. We don't use PREG here. */
6277 regerror (int errcode, const regex_t *preg, char *errbuf, size_t errbuf_size)
6283 || errcode >= (sizeof (re_error_msgid) / sizeof (re_error_msgid[0])))
6284 /* Only error codes returned by the rest of the code should be passed
6285 to this routine. If we are given anything else, or if other regex
6286 code generates an invalid error code, then the program has a bug.
6287 Dump core so we can fix it. */
6290 msg = gettext (re_error_msgid[errcode]);
6292 msg_size = strlen (msg) + 1; /* Includes the null. */
6294 if (errbuf_size != 0)
6296 if (msg_size > errbuf_size)
6298 strncpy (errbuf, msg, errbuf_size - 1);
6299 errbuf[errbuf_size - 1] = 0;
6302 strcpy (errbuf, msg);
6309 /* Free dynamically allocated space used by PREG. */
6312 regfree (regex_t *preg)
6314 if (preg->buffer != NULL)
6315 free (preg->buffer);
6316 preg->buffer = NULL;
6318 preg->allocated = 0;
6321 if (preg->fastmap != NULL)
6322 free (preg->fastmap);
6323 preg->fastmap = NULL;
6324 preg->fastmap_accurate = 0;
6326 if (preg->translate != NULL)
6327 free (preg->translate);
6328 preg->translate = NULL;
6331 #endif /* not emacs */
6335 make-backup-files: t
6337 trim-versions-without-asking: nil