1 dnl Define our own header notice with own copyright
2 define([AC_INIT_NOTICE],
3 [#### Configuration script for XEmacs. Largely divergent from FSF.
4 #### Guess values for system-dependent variables and create Makefiles.
5 #### Generated automatically using autoconf version] AC_ACVERSION [
6 #### Copyright (C) 1992, 1993, 1994, 1995, 1996, 1997, 1998, 1999, 2000 Free Software Foundation, Inc.
7 #### Copyright (C) 1993-1995 Board of Trustees, University of Illinois.
8 #### Copyright (C) 1996, 1997 Sun Microsystems, Inc.
9 #### Copyright (C) 1995, 1996, 2005 Ben Wing.
10 #### Copyright (C) 2000, 2001 Martin Buchholz.
11 #### Copyright (C) 1998, 1999 J. Kean Johnston.
13 ### Don't edit this script!
14 ### This script was automatically generated by the `autoconf' program
15 ### from the file `./configure.in'.
16 ### To rebuild it, execute the command
18 ### in the this directory. You must have autoconf version 2.13 or later.
19 ### Note: this script has not yet been ported to autoconf version 2.5x.
21 ### This file is part of XEmacs.
23 ### XEmacs is free software; you can redistribute it and/or modify it
24 ### under the terms of the GNU General Public License as published by
25 ### the Free Software Foundation; either version 2, or (at your
26 ### option) any later version.
28 ### XEmacs is distributed in the hope that it will be useful, but
29 ### WITHOUT ANY WARRANTY; without even the implied warranty of
30 ### MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU
31 ### General Public License for more details.
33 ### You should have received a copy of the GNU General Public License
34 ### along with XEmacs; see the file COPYING. If not, write to the Free
35 ### Software Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA
38 ### For usage, run `./configure --help'
39 ### For more detailed information on building and installing XEmacs,
40 ### read the file `INSTALL'.
42 ### If configure succeeds, it leaves its status in config.status.
43 ### A log of configuration tests can be found in config.log.
44 ### If configure fails after disturbing the status quo,
45 ### config.status is removed.
48 dnl Since XEmacs has configuration requirements that autoconf cannot
49 dnl meet, this file is an unholy marriage of custom-baked
50 dnl configuration code and autoconf macros.
52 dnl We use the m4 quoting characters [ ] (as established by the
53 dnl autoconf system), so quote them like this: [[foo]]
56 dnl Redefine some standard autoconf macros
57 dnl here is how XEmacs is different:
59 dnl - non-standard options
60 dnl - support for extra-verbosity
61 dnl - ordinary libs are handled separately from X libs (might be a mistake)
62 dnl - various random kludges (e.g. -with-dnet=no)
64 dnl PRINT_VAR(var var ...) prints values of shell variables
65 define([PRINT_VAR],[for var in patsubst([$1],[[
66 ]+],[ ]); do eval "echo \"$var = '\$$var'\""; done])
68 dnl Disable cache files:
69 dnl This is controversial, but I am convinced this is the right way to go,
70 dnl at least by default. Otherwise there are too many surprises.
71 define([AC_CACHE_LOAD], )dnl
72 define([AC_CACHE_SAVE], )dnl
73 define([AC_CACHE_VAL], [
77 dnl Redefine AC_TRY_RUN_NATIVE to not throw away stderr while running
78 dnl AC_TRY_RUN_NATIVE(PROGRAM, [ACTION-IF-TRUE [, ACTION-IF-FALSE]])
79 define([AC_TRY_RUN_NATIVE],
80 [cat > conftest.$ac_ext <<EOF
81 [#]line __oline__ "configure"
85 if AC_TRY_EVAL(ac_link) && test -s conftest && (./conftest; exit $?) 2>&AC_FD_CC
87 dnl Do not remove the temporary files here, so they can be examined.
88 ifelse([$2], , :, [$2])
91 echo "configure: failed program was:" >&AC_FD_CC
92 cat conftest.$ac_ext >&AC_FD_CC
93 ifelse([$3], , , [ rm -fr conftest*
97 rm -fr conftest*])dnl AC_TRY_RUN_NATIVE
100 dnl Avoid spurious cross-compiling warnings from AC_TRY_RUN
101 dnl XEmacs is unlikely to ever cross-compile
102 define([AC_TRY_RUN],[AC_TRY_RUN_NATIVE([$1], [$2], [$3])])dnl
104 dnl Redefine AC_DEFINE* to provide more output if extra_verbose
105 dnl Set VARIABLE to VALUE, verbatim, or 1.
106 dnl AC_DEFINE(VARIABLE [, VALUE])
108 [{ test "$extra_verbose" = "yes" && cat << \EOF
109 Defining $1[]ifelse($#, 2, [ = $2],)
111 cat >> confdefs.h <<\EOF
112 [#define] $1 ifelse($#, 2, [$2], 1)
117 define([AC_DEFINE_UNQUOTED],
118 [{ test "$extra_verbose" = "yes" && cat << EOF
119 Defining $1[]ifelse($#, 2, [ = $2],)
121 cat >> confdefs.h <<EOF
122 [#define] $1 ifelse($#, 2, [$2], 1)
125 ])dnl AC_DEFINE_UNQUOTED
127 dnl redefine AC_CHECK_LIB in accordance with our own value of ac_link
128 dnl Add in extra kludgy check to support with_dnet=no
129 dnl Add in extra LDFLAGS arg, which PRECEDES libs
130 dnl Support --with-dnet=no
132 dnl AC_CHECK_LIB(LIBRARY, FUNCTION [, ACTION-IF-FOUND [, ACTION-IF-NOT-FOUND
133 dnl [, OTHER-LIBRARIES] [, LDFLAGS]]]])
134 define([AC_CHECK_LIB],
135 [ifelse([$1],dnet, [if test "$with_dnet" = "no" ; then
136 ac_cv_lib_dnet_dnet_ntoa=no
137 ifelse([$4], , , [$4]
141 AC_CHECK_LIB_ORIG_HACKED([$1],[$2],[$3],[$4],[$5], [$6])
142 [ifelse([$1],dnet,[fi
146 define([AC_CHECK_LIB_ORIG_HACKED],
147 [ifelse([$5],,AC_MSG_CHECKING([for $2 in -l$1]),
148 xe_msg_checking="for [$2] in -l[$1]"
149 test -n "[$5]" && xe_msg_checking="$xe_msg_checking using extra libs [$5]"
150 AC_MSG_CHECKING("$xe_msg_checking"))
151 dnl Use a cache variable name containing both the library and function name,
152 dnl because the test really is for library $1 defining function $2, not
153 dnl just for library $1. Separate tests with the same $1 and different $2s
154 dnl may have different results.
155 ac_lib_var=`echo $1['_']$2 | sed 'y%./+-%__p_%'`
156 AC_CACHE_VAL(ac_cv_lib_$ac_lib_var,
157 [xe_check_libs="$6 -l$1 $5"
159 ifelse([$2], [main], , dnl Avoid conflicting decl of main.
160 [/* Override any gcc2 internal prototype to avoid an error. */
161 ]ifelse(AC_LANG, CPLUSPLUS, [#ifdef __cplusplus
165 [/* We use char because int might match the return type of a gcc2
166 builtin and then its argument prototype would still apply. */
170 eval "ac_cv_lib_$ac_lib_var=yes",
171 eval "ac_cv_lib_$ac_lib_var=no")
174 if eval "test \"`echo '$ac_cv_lib_'$ac_lib_var`\" = yes" ; then
178 ac_tr_lib=HAVE_LIB`echo $1 | sed -e 's/[^a-zA-Z0-9_]/_/g' \
179 -e 'y/abcdefghijklmnopqrstuvwxyz/ABCDEFGHIJKLMNOPQRSTUVWXYZ/'`
181 AC_DEFINE_UNQUOTED($ac_tr_lib)
182 XE_PREPEND([-l$1], LIBS)
189 ])dnl AC_CHECK_LIB_ORIG_HACKED
194 [define([AC_LANG], [C])dnl
196 dnl CFLAGS is not in ac_cpp because -g, -O, etc. are not valid cpp options.
197 dnl ac_cpp='$CPP $CPPFLAGS'
198 dnl ac_compile='${CC-cc} -c $CFLAGS $CPPFLAGS conftest.$ac_ext 1>&AC_FD_CC'
199 dnl ac_link='${CC-cc} -o conftest $CFLAGS $CPPFLAGS $LDFLAGS conftest.$ac_ext $LIBS 1>&AC_FD_CC'
200 xe_cppflags='$CPPFLAGS $c_switch_site $c_switch_machine $c_switch_system $c_switch_x_site $X_CFLAGS'
201 xe_ldflags='$LDFLAGS $ld_switch_site $ld_switch_machine $ld_switch_system $ld_switch_x_site $ld_switch_run'
202 xe_libs='$ld_call_shared $xe_check_libs $X_EXTRA_LIBS $libs_x $libs_gtk $X_PRE_LIBS $LIBS $libs_machine $libs_system $libs_standard'
203 ac_cpp='$CPP '"$xe_cppflags"
204 ac_compile='${CC-cc} -c $CFLAGS '"$xe_cppflags"' conftest.$ac_ext 1>&AC_FD_CC'
205 ac_link='${CC-cc} -o conftest $CFLAGS '"$xe_cppflags $xe_ldflags"' conftest.$ac_ext '"$xe_libs"' 1>&AC_FD_CC'
209 dnl The construct foo=`echo $w1 $w2 $w3` fails on some systems if $w1 = -e or -n
210 dnl So we use the following instead.
211 dnl XE_SPACE(var, words)
214 for W in $2; do if test -z "$T"; then T="$W"; else T="$T $W"; fi; done
218 dnl XE_ADD_OBJS(foo.o ...)
219 define([XE_ADD_OBJS],
220 [extra_objs="$extra_objs [$1]" && dnl
221 if test "$extra_verbose" = "yes"; then
222 echo " xemacs will be linked with \"[$1]\""
225 dnl XE_APPEND(value, varname)
227 [[$2]="$[$2] [$1]" && dnl
228 if test "$extra_verbose" = "yes"; then echo " Appending \"[$1]\" to \$[$2]"; fi])
230 dnl XE_PREPEND(value, varname)
232 [[$2]="[$1] $[$2]" && dnl
233 if test "$extra_verbose" = "yes"; then echo " Prepending \"[$1]\" to \$[$2]"; fi])
236 define([XE_DIE], [{ echo "Error:" $1 >&2; exit 1; }])
238 dnl XE_STRIP_4TH_COMPONENT(var)
239 dnl Changes i986-pc-linux-gnu to i986-pc-linux, as God (not RMS) intended.
240 define([XE_STRIP_4TH_COMPONENT],
241 [$1=`echo "$$1" | sed '[s/^\([^-][^-]*-[^-][^-]*-[^-][^-]*\)-.*$/\1/]'`])
243 dnl Initialize some variables set by options.
244 dnl The variables have the same names as the options, with
245 dnl dashes changed to underlines.
247 define([AC_INIT_PARSE_ARGS],[
249 dnl Get sane consistent behavior from various shells
250 dnl Avoid losing with weird user CDPATHs
252 if test -n "$ZSH_VERSION"; then
253 dnl zsh's Bourne shell emulation options
254 setopt NO_BAD_PATTERN NO_BANG_HIST NO_BG_NICE NO_EQUALS NO_FUNCTION_ARGZERO
255 setopt GLOB_SUBST NO_HUP INTERACTIVE_COMMENTS KSH_ARRAYS NO_MULTIOS NO_NOMATCH
256 setopt RM_STAR_SILENT POSIX_BUILTINS SH_FILE_EXPANSION SH_GLOB SH_OPTION_LETTERS
257 setopt SH_WORD_SPLIT BSD_ECHO IGNORE_BRACES
258 dnl zsh-3.1-beta drops core on the following
260 if test -n "$CDPATH"; then CDPATH="."; export CDPATH; fi
261 elif test -n "$BASH_VERSION"; then
262 dnl Use Posix mode with bash
266 if test -n "$CDPATH"; then CDPATH="."; export CDPATH; fi
269 dnl Initialize some variables set by options.
270 dnl The variables have the same names as the options, with
271 dnl dashes changed to underlines.
280 program_transform_name=s,x,x,
289 dnl Initialize some other variables.
292 SHELL=${CONFIG_SHELL-/bin/sh}
293 dnl Maximum number of lines to put in a shell here document.
295 ])dnl AC_INIT_PARSE_ARGS
297 AC_INIT(src/lisp.h)dnl
298 AC_CONFIG_HEADER(src/config.h lwlib/config.h)
299 dnl Remove any more than one leading "." element from the path name.
300 dnl If we do not remove them, then another "./" will be prepended to
301 dnl the file name each time we use config.status, and the program name
302 dnl will get larger and larger. This would not be a problem, except
303 dnl that since progname gets recorded in all the Makefiles this script
304 dnl produces, move-if-change thinks they're different when they're
307 dnl It would be nice if we could put the ./ in a \( \) group and then
308 dnl apply the * operator to that, so we remove as many leading './././'s
309 dnl as are present, but some seds (like Ultrix's sed) don't allow you to
310 dnl apply * to a \( \) group. Bleah.
311 progname="`echo $0 | sed 's:^\./\./:\./:'`"
313 dnl -----------------------------
314 dnl Establish some default values
315 dnl -----------------------------
317 XE_APPEND(lib-src, MAKE_SUBDIR)
318 XE_APPEND(lib-src, INSTALL_ARCH_DEP_SUBDIR)
321 exec_prefix='${prefix}'
322 bindir='${exec_prefix}/bin'
323 dnl FSF 19.29 changes to:
324 dnl datadir='${prefix}/share'
325 dnl sharedstatedir='${prefix}/com'
326 dnl libexecdir='${exec_prefix}/libexec'
327 datadir='${prefix}/lib'
328 statedir='${prefix}/lib'
329 libdir='${exec_prefix}/lib'
330 mandir='${prefix}/man/man1'
331 inststaticdir='${PROGNAME}'
332 instvardir='${PROGNAME}-${version}'
333 infodir='${datadir}/${instvardir}/info'
336 lispdir='${datadir}/${instvardir}/lisp'
337 moduledir='${libdir}/${instvardir}/${configuration}/modules'
338 sitelispdir='${datadir}/${inststaticdir}/site-lisp'
339 sitemoduledir='${libdir}/${inststaticdir}/site-modules'
340 pkgdir='${datadir}/${instvardir}/lisp'
342 etcdir='${datadir}/${instvardir}/etc'
343 archlibdir='${libdir}/${instvardir}/${configuration}'
344 docdir='${archlibdir}'
348 with_site_modules='yes'
351 dnl can't turn off widgets here because of systems where they are demanded
355 cpp='' cppflags='' libs='' ldflags=''
361 with_system_malloc='default'
362 with_dlmalloc='default'
363 use_regex_malloc='yes'
364 dnl ESD is associated with crashes and lockups due to incorrect signal use.
367 dnl These should be set to the empty string when we want gtk / gnome to
368 dnl be auto-detected instead of manually specified.
371 dnl use_assertions should be 'yes' by default. Too many people in this
372 dnl world have core dumps turned off by default or \"cannot find where the
373 dnl core file went\". At least we should get some useful output ...
375 dnl the following is set to yes or no later.
380 dnl pdump now defaults by opsys
382 dnl dragndrop is still experimental. When it is stable, comment out the following line:
384 dnl Too annoying, even if mandated by IPv6 (and I'm not even sure of that)
387 dnl ------------------
388 dnl Options Processing
389 dnl ------------------
391 define([USAGE_ERROR],
392 [(echo "$progname: Usage error:"
394 echo " Use \`$progname --help' to show usage.") >&2 && exit 1])
396 dnl Record all the arguments, so we can save them in config.status.
399 dnl Shell Magic: Quote the quoted arguments in ARGUMENTS. At a later date,
400 dnl in order to get the arguments back in $@, we have to do an
401 dnl 'eval set x "$quoted_arguments"; shift'
402 dnl # We use sed to turn embedded ' into '"'"'. I truly hate sh quoting.
403 quoted_sed_magic=s/"'"/"'"'"'"'"'"'"'"/g
407 -no-create | --no-create | --no-creat | --no-crea | --no-cre \
408 | --no-cr | --no-c) ;;
409 -no-recursion | --no-recursion | --no-recursio | --no-recursi \
410 | --no-recurs | --no-recur | --no-recu | --no-rec | --no-re | --no-r) ;;
412 quoted_i="`echo '' $i | sed -e 's:^ ::' -e $quoted_sed_magic`"
413 quoted_arguments="$quoted_arguments '$quoted_i'" ;;
417 dnl Do not use shift -- that destroys the argument list, which autoconf needs
418 dnl to produce config.status. It turns out that "set - $arguments" does not
420 dnl However, it also turns out that many shells cannot expand ${10} at all.
421 dnl So using an index variable does not work either. It is possible to use
422 dnl some shell magic to make 'set x "$arguments"; shift' work portably.
423 while test $# != 0; do
426 --no-create|--no-recursion) ;;
427 dnl Anything starting with a hyphen we assume is an option.
429 dnl Separate the switch name from the value it is being given.
432 opt=`echo '' $arg | sed -e 's:^ ::' -e 's:^-*\([[^=]]*\)=.*$:\1:'`
433 val=`echo '' $arg | sed -e 's:^ ::' -e 's:^-*[[^=]]*=\(.*\)$:\1:'`
436 dnl special case these strings since echo may silently eat them:
437 dnl --help ) opt=help val=yes valomitted=yes ;;
438 dnl --version ) opt=version val=yes valomitted=yes ;;
439 dnl -e ) opt=e val=yes valomitted=yes ;;
440 dnl -E ) opt=E val=yes valomitted=yes ;;
441 dnl -n ) opt=n val=yes valomitted=yes ;;
443 dnl If FOO is a boolean argument, --FOO is equivalent to
444 dnl --FOO=yes. Otherwise, the value comes from the next
445 dnl argument - see below.
446 opt=`echo '' $arg | sed -e 's:^ ::' -e 's:^-*\(.*\)$:\1:'`
447 val="yes" valomitted=yes
451 dnl translate "-" in option string to "_"
453 opt="`echo '' $opt | sed -e 's:^ ::' | tr - _`"
455 dnl Support --without-FOO as a synonym for --with-FOO=no
456 case "${valomitted}-${opt}" in yes-without_* )
457 opt=`echo $opt | sed 's/without/with/'`
458 valomitted="no" val="no" ;;
461 dnl Process the option.
464 dnl Process (many) boolean options
467 with_site_modules | \
526 memory_usage_stats | \
527 with_clash_detection | \
530 dnl Make sure the value given was either "yes" or "no".
532 y | ye | yes ) val=yes ;;
534 * ) USAGE_ERROR("The \`--$optname' option requires a boolean value: \`yes' or \`no'.") ;;
536 eval "$opt=\"$val\"" ;;
539 dnl Options that take a user-supplied value, as in --x-includes=/usr/X11R6/include
540 dnl The cache-file option is ignored (for compatibility with other configures)
556 site_runtime_libraries )
557 dnl If the value was omitted, get it from the next argument.
558 if test "$valomitted" = "yes" ; then
559 dnl Get the next argument from the argument list, if there is one.
560 if test "$#" = 0 ; then
561 USAGE_ERROR("The \`--$optname' option requires a value.");
568 dnl Options that take "yes", "no", or "default" values
571 with_debug_malloc | use_debug_malloc | \
572 with_system_malloc | use_system_malloc )
574 y | ye | yes ) val=yes ;;
576 d | de | def | defa | defau | defaul | default ) val=default ;;
577 * ) USAGE_ERROR(["The \`--$optname' option requires one of these values:
578 \`yes', \`no', or \`default'."]) ;;
580 case "$opt" in use_* ) opt="`echo $opt | sed s/use/with/`" ;; esac
584 dnl Has the user requested database support?
586 with_database_berkdb=no
588 with_database_gdbm=no
589 for x in `echo "$val" | sed -e 's/,/ /g'` ; do
592 b | be | ber | berk | berkd | berkdb ) with_database_berkdb=yes ;;
593 d | db | dbm ) with_database_dbm=yes ;;
594 g | gn | gnu | gnud | gnudb | gnudbm | gdbm) with_database_gdbm=yes ;;
595 * ) USAGE_ERROR(["The \`--$optname' option value
596 must be either \`no' or a comma-separated list
597 of one or more of \`berkdb' and either \`dbm' or \`gnudbm'."]) ;;
600 if test "$with_database_dbm" = "yes" -a \
601 "$with_database_gdbm" = "yes"; then
602 USAGE_ERROR("Only one of \`dbm' and \`gnudbm' may be specified
603 with the \`--$optname' option.")
607 dnl Has the user requested sound support?
609 dnl values is a subset of all,native,nas,esd
610 dnl or their negatives: none,nonative,nonas,noesd
611 for x in `echo "$val" | sed -e 's/,/ /g'` ; do
613 dnl all and none are only permitted as the first in the list.
614 n | no | non | none ) new_sdefault=no ;;
615 a | al | all | both ) new_sdefault=yes ;;
617 native ) with_native_sound=yes ;;
618 nonative ) with_native_sound=no ;;
620 nas ) with_nas_sound=yes ;;
621 nonas ) with_nas_sound=no ;;
623 esd ) with_esd_sound=yes ;;
624 noesd ) with_esd_sound=no ;;
626 * ) bogus_sound=yes ;;
628 if test "$bogus_sound" -o \
629 \( -n "$new_sdefault" -a -n "$sound_notfirst" \) ; then
630 types="\`all', \`none', \`(no)native', \`no(nas)', \`(no)esd'."
631 USAGE_ERROR(["Valid types for the \`--$optname' option are:
633 Option \`all' or \`none' must be first in the list.
634 The default is to autodetect native and NAS sound support."])
635 elif test -n "$new_sdefault" ; then
636 with_native_sound=$new_sdefault
637 with_nas_sound=$new_sdefault
638 with_esd_sound=$new_sdefault
639 new_sdefault= # reset this
645 dnl Has the user specified a preferred Athena widget set?
646 dnl This bit expands any alias names out for us...
649 xa | xaw ) val=xaw ;;
650 3 | 3d | xaw3d ) val=3d ;;
651 dnl No `n' for next, someone may try `no'
652 ne | nex | next | naxtaw) val=next ;;
653 dnl Have not tested the next two...
654 9 | 95 | xaw95 ) val=95 ;;
655 xp | xpm | xawxpm ) val=xpm ;;
656 * ) USAGE_ERROR(["The \`--$optname' option must have one of these values:
657 \`xaw', \`3d', \`next', \`95', or \`xpm'."]) ;;
662 dnl Has the user requested XIM support?
665 y | ye | yes ) val=yes ;;
666 n | no | non | none ) val=no ;;
667 x | xl | xli | xlib ) val=xlib ;;
668 m | mo | mot | moti | motif ) val=motif ;;
669 * ) USAGE_ERROR(["The \`--$optname' option must have one of these values:
670 \`motif', \`xlib', \`yes', or \`no'."]) ;;
675 dnl Mail locking specification
680 file | dot ) val=file ;;
681 locking ) val=locking ;;
682 * ) USAGE_ERROR(["The \`--$optname' option must have one of these values:
683 \`lockf', \`flock', \`file', \`locking', or \`mmdf'."]) ;;
688 dnl Has the user requested error-checking?
690 dnl value can be all, none, and/or a list of categories to check.
691 dnl Example: --error-checking=all,noextents,nobufpos
692 dnl Example: --error-checking=none,malloc,gc
694 for x in `echo "$val" | sed -e 's/,/ /g'` ; do
696 dnl all and none are only permitted as the first in the list.
697 n | no | non | none ) new_default=no ;;
698 a | al | all ) new_default=yes ;;
700 extents ) error_check_extents=yes ;;
701 noextents ) error_check_extents=no ;;
703 typecheck ) error_check_typecheck=yes ;;
704 notypecheck ) error_check_typecheck=no ;;
706 bufpos ) error_check_bufpos=yes ;;
707 nobufpos ) error_check_bufpos=no ;;
709 gc ) error_check_gc=yes ;;
710 nogc ) error_check_gc=no ;;
712 malloc ) error_check_malloc=yes ;;
713 nomalloc ) error_check_malloc=no ;;
715 byte_code ) error_check_byte_code=yes ;;
716 nobyte_code ) error_check_byte_code=no ;;
718 glyphs ) error_check_glyphs=yes ;;
719 noglyphs ) error_check_glyphs=no ;;
721 * ) bogus_error_check=yes ;;
723 if test "$bogus_error_check" -o \
724 \( -n "$new_default" -a -n "$echeck_notfirst" \) ; then
725 if test "$error_check_default" = yes ; then
726 types="\`all' (default), \`none', \`noextents', \`notypecheck', \`nobufpos', \`nogc', \`nomalloc', \`noglyphs' and \`nobyte-code'."
728 types="\`all', \`none' (default), \`extents', \`typecheck', \`bufpos', \`gc', \`malloc', \`glyphs' and \`byte-code'."
730 USAGE_ERROR(["Valid types for the \`--$optname' option are:
732 elif test -n "$new_default" ; then
733 error_check_extents=$new_default
734 error_check_typecheck=$new_default
735 error_check_bufpos=$new_default
736 error_check_gc=$new_default
737 error_check_malloc=$new_default
738 error_check_byte_code=$new_default
739 error_check_glyphs=$new_default
740 new_default= # reset this
746 dnl Has the user tried to tell us where the X files are?
747 dnl I think these are dopey, but no less than three alpha
748 dnl testers, at large sites, have said they have their X files
749 dnl installed in odd places.
751 dnl Has the user specified one of the path options?
752 prefix | exec_prefix | bindir | datadir | statedir | libdir | \
753 mandir | infodir | infopath | lispdir | etcdir | pkgdir | \
754 archlibdir | docdir | package_path | moduledir )
755 dnl If the value was omitted, get it from the next argument.
756 if test "$valomitted" = "yes"; then
757 if test "$#" = 0; then
758 USAGE_ERROR("The \`--$optname' option requires a value.");
764 dnl You need to synchronize this with the way the
765 dnl default values are built.
767 dnl prefix is taken care of by --with-prefix
768 exec_prefix ) AC_DEFINE(EXEC_PREFIX_USER_DEFINED) ;;
769 lispdir ) AC_DEFINE(LISPDIR_USER_DEFINED) ;;
770 sitelispdir ) AC_DEFINE(SITELISPDIR_USER_DEFINED) ;;
771 moduledir ) AC_DEFINE(MODULEDIR_USER_DEFINED) ;;
772 etcdir ) AC_DEFINE(ETCDIR_USER_DEFINED) ;;
773 infodir ) AC_DEFINE(INFODIR_USER_DEFINED) ;;
774 infopath ) AC_DEFINE(INFOPATH_USER_DEFINED) ;;
775 package_path ) AC_DEFINE(PACKAGE_PATH_USER_DEFINED) ;;
777 AC_DEFINE(INFODIR_USER_DEFINED)
778 AC_DEFINE(LISPDIR_USER_DEFINED)
779 AC_DEFINE(MODULEDIR_USER_DEFINED)
780 AC_DEFINE(ETCDIR_USER_DEFINED)
781 AC_DEFINE(DOCDIR_USER_DEFINED)
782 AC_DEFINE(ARCHLIBDIR_USER_DEFINED) ;;
783 docdir ) AC_DEFINE(DOCDIR_USER_DEFINED) ;;
784 exec_prefix | libdir | archlibdir ) AC_DEFINE(ARCHLIBDIR_USER_DEFINED) ;;
788 dnl --no-create added by autoconf for use by config.status
791 dnl Has the user asked for some help?
792 "usage" | "help" ) ${PAGER-more} ${srcdir}/configure.usage; exit 0 ;;
794 dnl Has the user specified the toolkit(s) to use for GUI elements?
796 "with_scrollbars" | \
800 l | lu | luc | luci | lucid ) val=lucid ;;
801 mo | mot | moti | motif ) val=motif ;;
802 a | at | ath | athe | athen | athena ) val=athena ;;
803 n | no | non | none ) val=no ;;
804 y | ye | yes ) val=yes ;;
805 dnl Explicit --with-widgets on command line means yes.
807 g | gt | gtk ) val=gtk ;;
808 ms | msw ) val=msw ;;
809 * ) USAGE_ERROR(["The \`--$optname' option must have one of these values:
810 \`gtk', \`lucid', \`motif', \`athena', \`yes', or \`no'."]) ;;
815 dnl Obsolete legacy argument? Warn, but otherwise ignore.
816 "use_minimal_tagbits" | \
817 "use_indexed_lrecord_implementation" | \
819 "const_is_losing" | \
821 AC_MSG_WARN([Obsolete option \`--$optname' ignored.])
824 dnl Unrecognized option? No mercy for user errors.
825 * ) USAGE_ERROR("Unrecognized option: $arg") ;;
830 dnl Assume anything with multiple hyphens is a configuration name.
831 *-*-*) configuration="$arg" ;;
833 dnl Unrecognized argument? No mercy for user errors.
834 *) USAGE_ERROR("Unrecognized argument: $arg") ;;
839 dnl -------------------------
840 dnl Finish options processing
841 dnl -------------------------
843 dnl Several options are equivalent to, and override, environment variables.
844 test -n "$cpp" && CPP="$cpp"
845 test -n "$cppflags" && CPPFLAGS="$cppflags"
846 test -n "$libs" && LIBS="$libs"
847 test -n "$ldflags" && LDFLAGS="$ldflags"
849 dnl Get the arguments back. See the diatribe on Shell Magic above.
850 eval set x "$quoted_arguments"; shift
852 dnl --extra-verbose implies --verbose
853 test "$extra_verbose" = "yes" && verbose=yes
855 dnl with_x is an obsolete synonym for with_x11
856 test -n "$with_x" && with_x11="$with_x"
858 dnl --with-quantify or --with-purify imply --use-system-malloc
859 if test "$with_purify" = "yes" -o "$with_quantify" = "yes"; then
860 test "$with_system_malloc" = "default" && with_system_malloc=yes
863 dnl XE_CHECK_FEATURE_DEPENDENCY(feature1, feature2)
864 define([XE_CHECK_FEATURE_DEPENDENCY],
865 [if test "$with_$1 $with_$2" = "yes no"; then
866 USAGE_ERROR("--with-$1 requires --with-$2")
867 elif test "$with_$2" = "no" ; then with_$1=no
868 elif test "$with_$1" = "yes"; then with_$2=yes
872 dnl CDE requires tooltalk
873 XE_CHECK_FEATURE_DEPENDENCY(cde, tooltalk)
875 dnl Find the source directory.
878 dnl If srcdir is not specified, see if "." or ".." might work.
880 for dir in "`echo $0 | sed 's|//|/|' | sed 's|/[[^/]]*$||'`" "." ".." ; do
881 if test -f "$dir/src/lisp.h" -a \
882 -f "$dir/lisp/version.el" ; then
887 if test -z "$srcdir" ; then
888 USAGE_ERROR(["Neither the current directory nor its parent seem to
889 contain the XEmacs sources. If you do not want to build XEmacs in its
890 source tree, you should run \`$progname' in the directory in which
891 you wish to build XEmacs, using the \`--srcdir' option to say where the
892 sources may be found."])
896 dnl Otherwise, check if the directory they specified is okay.
898 if test ! -f "$srcdir/src/lisp.h" -o \
899 ! -f "$srcdir/lisp/version.el" ; then
900 USAGE_ERROR(["The directory specified with the \`--srcdir' option,
901 \`$srcdir', doesn't seem to contain the XEmacs sources. You should
902 either run the \`$progname' script at the top of the XEmacs source
903 tree, or use the \`--srcdir' option to specify the XEmacs source directory."])
908 dnl ###########################################################################
909 if test -z "$configuration"; then
910 dnl Guess the configuration
911 configuration=`${CONFIG_SHELL-/bin/sh} $srcdir/config.guess`
912 if test -z "$configuration"; then
913 USAGE_ERROR(["XEmacs has not been ported to this host type.
914 Try explicitly specifying the CONFIGURATION when rerunning configure."])
920 dnl Make symlinks for etc, lisp, and info directories while the path
921 dnl is still relative. We do not symlink lock because someone may
922 dnl have stuck the source on a read-only partition. Instead we
923 dnl create it as an actual directory later on if it does not already
925 for dir in lisp etc man info tests; do
926 if test ! -d "$dir" ; then
927 echo Making symbolic link to "$srcdir/$dir"
928 ${LN_S} "$srcdir/$dir" "$dir"
932 dnl Do our best to deal with automounter brokenness
933 dnl CANONICALIZE_PATH(varname)
934 define([CANONICALIZE_PATH],
935 [if test -d "/net"; then
936 if test -d "/tmp_mnt/net"; then tdir="tmp_mnt/net"; else tdir="tmp_mnt"; fi
938 sed -e "s|^${tdir}/|/net/|" -e "s|^/a/|/net/|" -e "s|^/amd/|/net/|"`
941 dnl Calculate canonical name for blddir (i.e. current directory).
942 dnl PWD may already be the preferable absolute name for ".",
943 dnl but we can't trust it - it is sometimes inaccurate.
944 absolute_pwd="`pwd`";
945 if test -n "$PWD" -a "`cd $PWD && pwd`" = "$absolute_pwd"
947 else blddir="$absolute_pwd"; CANONICALIZE_PATH(blddir)
951 dnl Make srcdir absolute, if not already. It is important to
952 dnl avoid running the path through pwd unnecessary, since pwd can
953 dnl give you automounter prefixes, which can go away.
956 . ) srcdir="$blddir" ;;
957 * ) srcdir="`cd $srcdir && pwd`"; CANONICALIZE_PATH(srcdir) ;;
960 dnl Check if the source directory already has a configured system in it.
961 if test `pwd` != `sh -c cd $srcdir && pwd` \
962 && test -f "$srcdir/src/config.h"; then
963 (echo "$progname: WARNING: The directory tree \`$srcdir' is being used"
964 echo " as a build directory right now; it has been configured in its own"
965 echo " right. To configure in another directory as well, you MUST"
966 echo " use GNU make. If you do not have GNU make, then you must"
967 echo " now do \`make distclean' in $srcdir,"
968 echo " and then run $progname again.") >&2
969 extrasub='/^VPATH[[ ]]*=/c\
975 vpath %.in $(srcdir)'
978 dnl ----------------------------------------
979 dnl Find out which version of XEmacs this is
980 dnl ----------------------------------------
981 . "$srcdir/version.sh" || exit 1;
982 dnl Must do the following first to determine verbosity for AC_DEFINE
983 if test -n "$emacs_is_beta"; then beta=yes; else beta=no; fi
984 : "${extra_verbose=$beta}"
985 version="${emacs_major_version}.${emacs_minor_version}"
986 AC_DEFINE_UNQUOTED(EMACS_MAJOR_VERSION, $emacs_major_version)
987 AC_DEFINE_UNQUOTED(EMACS_MINOR_VERSION, $emacs_minor_version)
988 if test -n "$emacs_beta_version" ; then
989 if test "$beta" = "yes"; then
990 version="${version}-b${emacs_beta_version}"
991 AC_DEFINE_UNQUOTED(EMACS_BETA_VERSION, $emacs_beta_version)
993 version="${version}.${emacs_beta_version}"
994 AC_DEFINE_UNQUOTED(EMACS_PATCH_LEVEL, $emacs_beta_version)
997 AC_DEFINE_UNQUOTED(XEMACS_CODENAME, "$xemacs_codename")
998 AC_DEFINE_UNQUOTED(EMACS_VERSION, "$version")
1000 if test "$with_infodock" = "yes"; then
1001 if test ! -f ../../ID-INSTALL; then
1002 echo "Cannot build InfoDock without InfoDock sources"
1007 if test "$with_infodock" = "yes"; then
1008 dnl InfoDock version numbers. XEmacs will use the same style of numbering
1009 dnl after the release of XEmacs 21.0.
1010 AC_DEFINE_UNQUOTED(INFODOCK_MAJOR_VERSION, $infodock_major_version)
1011 AC_DEFINE_UNQUOTED(INFODOCK_MINOR_VERSION, $infodock_minor_version)
1012 AC_DEFINE_UNQUOTED(INFODOCK_BUILD_VERSION, $infodock_build_version)
1013 version=${infodock_major_version}.${infodock_minor_version}.${infodock_build_version}
1015 CPPFLAGS="$CPPFLAGS -DINFODOCK"
1020 AC_DEFINE_UNQUOTED(EMACS_PROGNAME, "$PROGNAME")
1022 dnl ----------------------------------
1023 dnl Error checking and debugging flags
1024 dnl ----------------------------------
1025 dnl Error checking default to "yes" in beta versions, to "no" in releases.
1026 dnl Same goes for --debug and --extra-verbosity.
1027 if test -n "$emacs_is_beta"; then beta=yes; else beta=no; fi
1028 test "${error_check_extents=$beta}" = yes && AC_DEFINE(ERROR_CHECK_EXTENTS)
1029 test "${error_check_typecheck=$beta}" = yes && AC_DEFINE(ERROR_CHECK_TYPECHECK)
1030 test "${error_check_bufpos=$beta}" = yes && AC_DEFINE(ERROR_CHECK_BUFPOS)
1031 test "${error_check_gc=$beta}" = yes && AC_DEFINE(ERROR_CHECK_GC)
1032 test "${error_check_malloc=$beta}" = yes && AC_DEFINE(ERROR_CHECK_MALLOC)
1033 test "${error_check_byte_code=$beta}" = yes && AC_DEFINE(ERROR_CHECK_BYTE_CODE)
1034 test "${error_check_glyphs=$beta}" = yes && AC_DEFINE(ERROR_CHECK_GLYPHS)
1035 dnl debug=yes must be set when error checking is present. This should be
1037 dnl debug implies other options
1038 if test "${debug:=$beta}" = "yes"; then
1039 use_assertions=yes memory_usage_stats=yes
1040 XE_ADD_OBJS(debug.o)
1041 XE_ADD_OBJS(tests.o)
1042 AC_DEFINE(DEBUG_XEMACS)
1044 test "$use_assertions" = "yes" && AC_DEFINE(USE_ASSERTIONS)
1045 test "$memory_usage_stats" = "yes" && AC_DEFINE(MEMORY_USAGE_STATS)
1047 dnl ------------------------------
1048 dnl Determine the s&m files to use
1049 dnl ------------------------------
1050 dnl Given the configuration name, set machfile and opsysfile to the
1051 dnl names of the m/*.h and s/*.h files we should use.
1053 dnl Canonicalize the configuration name.
1054 AC_MSG_CHECKING("host system type")
1055 dnl allow -workshop suffix on configuration name
1056 internal_configuration=`echo $configuration | sed 's/-\(workshop\)//'`
1057 canonical=`${CONFIG_SHELL-/bin/sh} $srcdir/config.sub "$internal_configuration"`
1058 XE_STRIP_4TH_COMPONENT(configuration)
1059 XE_STRIP_4TH_COMPONENT(canonical)
1060 AC_MSG_RESULT($configuration)
1062 dnl If you add support for a new configuration, add code to this
1063 dnl switch statement to recognize your configuration name and select
1064 dnl the appropriate operating system and machine description files.
1066 dnl You would hope that you could choose an m/*.h file pretty much
1067 dnl based on the machine portion of the configuration name, and an s-
1068 dnl file based on the operating system portion. However, it turns out
1069 dnl that each m/*.h file is pretty manufacturer-specific - for
1070 dnl example, apollo.h, hp9000s300.h, mega68k, news.h, and tad68k are
1071 dnl all 68000 machines; mips.h, pmax.h, and news-risc are all MIPS
1072 dnl machines. So we basically have to have a special case for each
1073 dnl configuration name.
1075 dnl As far as handling version numbers on operating systems is
1076 dnl concerned, make sure things will fail in a fixable way. If
1077 dnl /etc/MACHINES says nothing about version numbers, be
1078 dnl prepared to handle anything reasonably. If version numbers
1079 dnl matter, be sure /etc/MACHINES says something about it.
1081 dnl Eric Raymond says we should accept strings like "sysvr4" to mean
1082 dnl "System V Release 4"; he writes, "The old convention encouraged"
1083 dnl "confusion between `system' and `release' levels'."
1087 dnl Straightforward machine determination
1088 case "$canonical" in
1089 sparc-*-* ) machine=sparc ;;
1090 alpha*-*-* ) machine=alpha ;;
1091 vax-*-* ) machine=vax ;;
1092 mips-dec-* ) machine=pmax ;;
1093 mips-sgi-irix6* ) machine=iris6d ;;
1094 mips-sgi-* ) machine=iris4d ;;
1095 mips*-linux ) machine=mips ;;
1096 romp-ibm-* ) machine=ibmrt ;;
1097 rs6000-ibm-aix* ) machine=ibmrs6000 ;;
1098 powerpc-ibm-aix* ) machine=ibmrs6000 ;;
1099 powerpc*-* ) machine=powerpc ;;
1100 hppa-*-* ) machine=hp800 ;;
1101 m88k-dg-* ) machine=aviion ;;
1102 m68*-sony-* ) machine=news ;;
1103 mips-sony-* ) machine=news-risc ;;
1104 clipper-* ) machine=clipper ;;
1105 arm* ) machine=arm ;;
1106 ns32k-* ) machine=ns32000 ;;
1109 dnl Straightforward OS determination
1110 case "$canonical" in
1111 *-*-linux* ) opsys=linux ;;
1112 *-*-netbsd* ) opsys=netbsd ;;
1113 *-*-openbsd* ) opsys=openbsd ;;
1114 *-*-nextstep* ) opsys=nextstep ;;
1115 *-*-vms ) opsys=vms ;;
1118 *-dec-osf1.3 | *-dec-osf2* ) opsys=decosf1-3 ;;
1119 *-dec-osf1.2 | *-dec-osf1* ) opsys=decosf1-2 ;;
1120 *-dec-osf3.[[2-9]] ) opsys=decosf3-2 ;;
1121 *-dec-osf3* ) opsys=decosf3-1 ;;
1122 *-dec-osf[[4-9]]* ) opsys=decosf4-0 ;;
1125 *-*-ultrix[[0-3]].* | *-*-ultrix4.0* ) opsys=bsd4-2 ;;
1126 *-*-ultrix4.[[12]]* ) opsys=bsd4-3 ;;
1127 *-*-ultrix* ) opsys=ultrix4-3 ;;
1130 *-*-aix3.1* ) opsys=aix3-1 ;;
1131 *-*-aix3.2.5 ) opsys=aix3-2-5 ;;
1132 *-*-aix3* ) opsys=aix3-2 ;;
1133 *-*-aix4.0* ) opsys=aix4 ;;
1134 *-*-aix4.1* ) opsys=aix4-1 ;;
1135 *-*-aix[[4-9]]* ) opsys=aix4-2 ;;
1137 dnl Other generic OSes
1138 *-gnu* ) opsys=gnu ;;
1139 *-*-bsd4.[[01]] ) opsys=bsd4-1 ;;
1140 *-*-bsd4.2 ) opsys=bsd4-2 ;;
1141 *-*-bsd4.3 ) opsys=bsd4-3 ;;
1142 *-*-aos4.2 ) opsys=bsd4-2 ;;
1143 *-*-aos* ) opsys=bsd4-3 ;;
1144 *-*-sysv0 | *-*-sysvr0 ) opsys=usg5-0 ;;
1145 *-*-sysv2 | *-*-sysvr2 ) opsys=usg5-2 ;;
1146 *-*-sysv2.2 | *-*-sysvr2.2 ) opsys=usg5-2-2 ;;
1147 *-*-sysv3* | *-*-sysvr3* ) opsys=usg5-3 ;;
1148 *-*-sysv4.1* | *-*-sysvr4.1* )opsys=usg5-4 NON_GNU_CPP=/usr/lib/cpp ;;
1149 *-*-sysv4.[[2-9]]* | *-sysvr4.[[2-9]]* )
1150 if test -z "$NON_GNU_CPP" ; then
1151 for prog in "/usr/ccs/lib/cpp" "/lib/cpp"; do
1152 if test -f "$prog"; then NON_GNU_CPP="$prog"; break; fi
1156 *-sysv4* | *-sysvr4* ) opsys=usg5-4 ;;
1157 *-*-mach_bsd4.3* ) opsys=mach-bsd4-3 ;;
1160 case "$canonical" in
1164 case "$canonical" in
1165 i[[3-9]]86-*-netbsd*) machine=intel386 ;;
1166 hp300-*-netbsd* | amiga-*-netbsd* | sun3-*-netbsd* | mac68k-*-netbsd* | da30-*-netbsd* | m68k-*-netbsd* )
1167 dnl Yes, this is somewhat bogus.
1168 machine=hp9000s300 ;;
1169 pc532-*-netbsd* | ns32k-*-netbsd* ) machine=ns32000 ;;
1170 pmax-*-netbsd* | mips-*-netbsd* ) machine=pmax ;;
1176 case "${canonical}" in
1177 i386-*-openbsd*) machine=intel386 ;;
1178 m68k-*-openbsd*) machine=hp9000s300 ;;
1179 mipsel-*-openbsd*) machine=pmax ;;
1184 arm-acorn-riscix1.1* ) machine=acorn opsys=riscix1-1 ;;
1185 arm-acorn-riscix1.2* | arm-acorn-riscix ) machine=acorn opsys=riscix1-2 ;;
1187 dnl Alliant machines
1188 fx80-alliant-* ) machine=alliant4 opsys=bsd4-2 ;;
1189 i860-alliant-* ) machine=alliant-2800 opsys=bsd4-3 ;;
1192 m68*-altos-sysv* ) machine=altos opsys=usg5-2 ;;
1195 580-amdahl-sysv* ) machine=amdahl opsys=usg5-2-2 ;;
1197 dnl Apollo, Domain/OS
1198 m68*-apollo-* ) machine=apollo opsys=bsd4-3 ;;
1200 dnl AT&T 3b2, 3b5, 3b15, 3b20
1201 we32k-att-sysv* ) machine=att3b opsys=usg5-2-2 ;;
1203 dnl AT&T 3b1 - The Mighty Unix PC!
1204 m68*-att-sysv* ) machine=7300 opsys=usg5-2-2 ;;
1207 rs6000-bull-bosx* ) machine=ibmrs6000 opsys=aix3-2 ;; # dpx20
1208 m68*-bull-sysv3* ) machine=dpx2 opsys=usg5-3 ;; # dpx2
1209 m68*-bull-sysv2* ) machine=sps7 opsys=usg5-2 ;; # sps7
1211 dnl CCI 5/32, 6/32 -- see "Tahoe".
1214 celerity-celerity-bsd* ) machine=celerity opsys=bsd4-2 ;;
1217 *-convex-bsd* | *-convex-convexos* )
1218 machine=convex opsys=bsd4-3
1219 NON_GNU_CPP="cc -E -P"
1223 i[[3-9]]86-cubix-sysv* ) machine=intel386 opsys=usg5-3 ;;
1225 dnl Darwin, a.k.a. MacOS X (based on Mach and Freebsd)
1228 RANLIB="ranlib -c" dnl Avoids a link error with lwlib-config.c
1231 dnl Data General AViiON Machines
1232 i586-dg-dgux*R4* | i586-dg-dgux5.4.4* ) machine=aviion opsys=dgux5-4r4 ;;
1233 m88k-dg-dgux5.4R3* | m88k-dg-dgux5.4.3* ) opsys=dgux5-4r3 ;;
1234 m88k-dg-dgux5.4R2* | m88k-dg-dgux5.4.2* ) opsys=dgux5-4r2 ;;
1235 m88k-dg-dgux* ) opsys=dgux ;;
1237 dnl Motorola Delta machines
1238 m68k-motorola-sysv* | m68000-motorola-sysv* ) machine=delta opsys=usg5-3 ;;
1239 m88k-motorola-sysv4* )
1240 dnl jbotte@bnr.ca says that UNIX_System_V <hostName> 4.0 R40V4.3 m88k mc88110
1241 dnl needs POSIX_SIGNALS and therefore needs usg5-4-2.
1242 dnl I hope there are not other 4.0 versions for this machine
1243 dnl which really need usg5-4 instead.
1244 machine=delta88k opsys=usg5-4-2
1246 m88k-motorola-sysv* | m88k-motorola-m88kbcs* ) machine=delta88k opsys=usg5-3 ;;
1249 m68*-dual-sysv* ) machine=dual opsys=usg5-2 ;;
1250 m68*-dual-uniplus* ) machine=dual opsys=unipl5-2 ;;
1253 ns16k-encore-bsd* ) machine=ns16000 opsys=umax ;;
1255 dnl Gould Power Node and NP1
1256 pn-gould-bsd4.2* ) machine=gould opsys=bsd4-2 ;;
1257 pn-gould-bsd4.3* ) machine=gould opsys=bsd4-3 ;;
1258 np1-gould-bsd* ) machine=gould-np1 opsys=bsd4-3 ;;
1260 dnl Harris Night Hawk machines running CX/UX (a 5000 looks just like a 4000
1261 dnl as far as XEmacs is concerned).
1263 dnl Build needs to be different on 7.0 and later releases
1264 case "`uname -r`" in
1265 [[56]].[[0-9]] ) machine=nh4000 opsys=cxux ;;
1266 [[7]].[[0-9]] ) machine=nh4000 opsys=cxux7 ;;
1268 NON_GNU_CPP="/lib/cpp"
1270 dnl Harris ecx or gcx running CX/UX (Series 1200, Series 3000)
1271 m68k-harris-cxux* ) machine=nh3000 opsys=cxux ;;
1272 dnl Harris power pc NightHawk running Power UNIX (Series 6000)
1273 powerpc-harris-powerunix ) machine=nh6000 opsys=powerunix NON_GNU_CPP="cc -Xo -E -P" ;;
1275 dnl Honeywell XPS100
1276 xps*-honeywell-sysv* ) machine=xps100 opsys=usg5-2 ;;
1278 dnl HP 9000 series 200 or 300
1279 m68*-hp-bsd* ) machine=hp9000s300 opsys=bsd4-3 ;;
1283 dnl Figure out machine and opsys orthogonally
1284 case "$canonical" in
1285 m68* ) machine=hp9000s300 ;;
1286 hppa* ) machine=hp800 ;;
1289 case "$canonical" in
1290 *-hp-hpux7* ) opsys=hpux ;;
1291 *-hp-hpux8* ) opsys=hpux8 ;;
1292 *-hp-hpux9* ) opsys=hpux9 ;;
1293 *-hp-hpux10* ) opsys=hpux10 ;;
1294 *-hp-hpux11* ) opsys=hpux11 ;;
1298 dnl HP has a broken "strcat"
1299 case "$opsys" in hpux9 | hpux10 ) XE_ADD_OBJS(strcat.o) ;; esac
1301 if test "$opsys" = "hpux10" -o "$opsys" = "hpux11"; then \
1302 ansi_flag="-Ae"; else ansi_flag="-Aa"; fi
1303 NON_GNU_CC="cc $ansi_flag" NON_GNU_CPP="cc $ansi_flag -E"
1305 case "$canonical" in *-hp-hpux*shr* ) opsys="${opsys}-shr" ;; esac
1309 orion-orion-bsd* ) machine=orion opsys=bsd4-2 ;;
1310 clipper-orion-bsd* ) machine=orion105 opsys=bsd4-2 ;;
1313 i[[3-9]]86-ibm-aix1.1* ) machine=ibmps2-aix opsys=usg5-2-2 ;;
1314 i[[3-9]]86-ibm-aix1.[[23]]* | i[[3-9]]86-ibm-aix* ) machine=ibmps2-aix opsys=usg5-3 ;;
1315 i370-ibm-aix*) machine=ibm370aix opsys=usg5-3 ;;
1316 romp-ibm-aos* ) opsys=bsd4-3 ;;
1317 romp-ibm-bsd* ) opsys=bsd4-3 ;;
1318 romp-ibm-mach* ) opsys=mach-bsd4-3 ;;
1320 dnl Integrated Solutions "Optimum V"
1321 m68*-isi-bsd4.2* ) machine=isi-ov opsys=bsd4-2 ;;
1322 m68*-isi-bsd4.3* ) machine=isi-ov opsys=bsd4-3 ;;
1324 dnl Intel 386 machines where we do care about the manufacturer
1325 i[[3-9]]86-intsys-sysv* ) machine=is386 opsys=usg5-2-2 ;;
1328 i[[3-9]]86-prime-sysv* ) machine=i386 opsys=usg5-3 ;;
1330 dnl Sequent Symmetry running Dynix
1331 i[[3-9]]86-sequent-bsd* ) machine=symmetry opsys=bsd4-3 ;;
1333 dnl Sequent Symmetry running DYNIX/ptx
1334 i[[3-9]]86-sequent-ptx* ) machine=sequent-ptx opsys=ptx NON_GNU_CPP="/lib/cpp" ;;
1336 dnl Unspecified sysv on an ncr machine defaults to svr4.2.
1337 dnl (Plain usg5-4 does not turn on POSIX signals, which we need.)
1338 i[[3-9]]86-ncr-sysv* ) machine=ncr386 opsys=usg5-4-2 ;;
1340 dnl Intel Paragon OSF/1
1341 i860-intel-osf1* ) machine=paragon opsys=osf1 NON_GNU_CPP=/usr/mach/lib/cpp ;;
1344 i860-*-sysv4* ) machine=i860 opsys=usg5-4 NON_GNU_CC="/bin/cc" NON_GNU_CPP="/usr/ccs/lib/cpp" ;;
1346 dnl Masscomp machines
1347 m68*-masscomp-rtu* ) machine=masscomp opsys=rtu ;;
1349 dnl Megatest machines
1350 m68*-megatest-bsd* ) machine=mega68 opsys=bsd4-2 ;;
1352 dnl Workstations sold by MIPS
1353 dnl This is not necessarily all workstations using the MIPS processor -
1354 dnl Irises are produced by SGI, and DECstations by DEC.
1355 mips-mips-usg* ) machine=mips4 ;;
1358 NON_GNU_CC="cc -systype bsd43"
1359 NON_GNU_CPP="cc -systype bsd43 -E"
1360 case "$canonical" in
1361 mips-mips-riscos4* ) opsys=bsd4-3 ;;
1362 mips-mips-riscos5* ) opsys=riscos5 ;;
1365 mips-mips-bsd* ) machine=mips opsys=bsd4-3 ;;
1366 mips-mips-* ) machine=mips opsys=usg5-2-2 ;;
1369 m68*-next-* | m68k-*-nextstep* ) machine=m68k opsys=nextstep ;;
1371 dnl The complete machine from National Semiconductor
1372 ns32k-ns-genix* ) machine=ns32000 opsys=usg5-2 ;;
1375 m68*-ncr-sysv2* | m68*-ncr-sysvr2* ) machine=tower32 opsys=usg5-2-2 ;;
1376 m68*-ncr-sysv3* | m68*-ncr-sysvr3* ) machine=tower32v3 opsys=usg5-3 ;;
1378 dnl Nixdorf Targon 31
1379 m68*-nixdorf-sysv* ) machine=targon31 opsys=usg5-2-2 ;;
1382 m68*-nu-sysv* ) machine=nu opsys=usg5-2 ;;
1385 m68*-plexus-sysv* ) machine=plexus opsys=usg5-2 ;;
1387 dnl Pyramid machines
1388 pyramid-pyramid-bsd* ) machine=pyramid opsys=bsd4-2 ;;
1391 ns32k-sequent-bsd4.2* ) machine=sequent opsys=bsd4-2 ;;
1392 ns32k-sequent-bsd4.3* ) machine=sequent opsys=bsd4-3 ;;
1395 mips-siemens-sysv* | mips-sni-sysv*)
1396 machine=mips-siemens opsys=usg5-4
1397 NON_GNU_CC=/usr/ccs/bin/cc
1398 NON_GNU_CPP=/usr/ccs/lib/cpp
1404 NON_GNU_CC=/usr/ccs/bin/cc
1405 NON_GNU_CPP=/usr/ccs/lib/cpp
1408 dnl Silicon Graphics machines
1409 dnl Iris 2500 and Iris 2500 Turbo (aka the Iris 3030)
1410 m68*-sgi-iris3.5* ) machine=irist opsys=iris3-5 ;;
1411 m68*-sgi-iris3.6* | m68*-sgi-iris*) machine=irist opsys=iris3-6 ;;
1413 mips-sgi-irix3.* ) opsys=irix3-3 ;;
1414 mips-sgi-irix4.* ) opsys=irix4-0 ;;
1415 mips-sgi-irix6* ) opsys=irix6-0 ;;
1416 mips-sgi-irix5.1* ) opsys=irix5-1 ;;
1417 mips-sgi-irix5.2* ) opsys=irix5-2 ;;
1418 mips-sgi-irix5.* ) opsys=irix5-3 ;;
1419 mips-sgi-irix* ) opsys=irix5-0 ;;
1422 *-sony-newsos[[34]]* | *-sony-news[[34]]* ) opsys=bsd4-3 ;;
1423 *-sony-news* ) opsys=newsos5 ;;
1426 m68*-stride-sysv* ) machine=stride opsys=usg5-2 ;;
1429 *-*-solaris* | *-*-sunos* | *-sun-mach* | *-sun-bsd* )
1431 case "$canonical" in
1432 m68*-sunos1* ) machine=sun1 ;;
1433 m68*-sunos2* ) machine=sun2 ;;
1434 m68* ) machine=sun3 ;;
1435 i*86*-sun-sunos[[34]]* ) machine=sun386 ;;
1436 i*86-*-* ) machine=intel386 ;;
1437 rs6000* ) machine=rs6000 ;;
1440 dnl Make $canonical even more so.
1441 case "$canonical" in *-sunos5*)
1442 canonical=`echo $canonical | sed -e s/sunos5/solaris2/`;;
1445 dnl On SunOS 4, use /usr/lib/cpp, sans dynodump, /bin/ranlib
1446 dnl On SunOS 5, use cc -E, need dynodump, RANLIB not needed
1447 dnl But, SunOS 5.6 no longer needs dynodump because it has a similar
1448 dnl function integrated.
1449 case "$canonical" in
1451 #test -f /usr/lib/cpp && NON_GNU_CPP=/usr/lib/cpp ;;
1454 #test -f /usr/ccs/lib/cpp && NON_GNU_CPP=/usr/ccs/lib/cpp
1458 case "$canonical" in
1461 os_release_major=`uname -r | sed -e 's/^\([[0-9]]\{1,\}\)\.\([[0-9]]\{1,\}\).*/\1/'`
1462 os_release_minor=`uname -r | sed -e 's/^\([[0-9]]\{1,\}\)\.\([[0-9]]\{1,\}\).*/\2/'`
1463 case "$os_release_minor" in [[0-9]])
1464 os_release_minor="0${os_release_minor}";;
1466 os_release="${os_release_major}${os_release_minor}"
1467 AC_DEFINE_UNQUOTED(OS_RELEASE, $os_release) ;;
1469 dnl The last Sun386 ran 4.0.
1470 i*86-*-sunos4* ) opsys=sunos4-0 ;;
1471 *-sunos4.0* ) opsys=sunos4-0 ;;
1472 *-sunos4.1.2* ) opsys=sunos4-1-2 ;;
1473 *-sunos4.1.3* ) opsys=sunos4-1-3 ;;
1474 *-sunos4.1.[[4-9]]* ) opsys=sunos4-1-4 ;;
1475 *-sunos4* | *-sunos ) opsys=sunos4-1 ;;
1476 *-mach* ) opsys=mach-bsd4-3 ;;
1480 case "$canonical" in *-sunos4*shr* ) opsys="${opsys}-shr" ;; esac
1482 dnl Watch out for a compiler guaranteed not to work.
1483 test "$opsys $CC" = "sol2 /usr/ucb/cc" && CC=""
1487 m68*-tadpole-sysv* ) machine=tad68k opsys=usg5-3 ;;
1490 tahoe-tahoe-bsd4.2* ) machine=tahoe opsys=bsd4-2 ;;
1491 tahoe-tahoe-bsd4.3* ) machine=tahoe opsys=bsd4-3 ;;
1493 dnl Tandem Integrity S2
1494 mips-tandem-sysv* ) machine=tandem-s2 opsys=usg5-3 ;;
1497 m88k-tektronix-sysv3* ) machine=tekxd88 opsys=usg5-3 ;;
1499 dnl Tektronix 16000 box (6130?)
1500 ns16k-tektronix-bsd* ) machine=ns16000 opsys=bsd4-2 ;;
1502 dnl src/m/tek4300.h hints that this is a m68k machine.
1503 m68*-tektronix-bsd* ) machine=tek4300 opsys=bsd4-3 ;;
1506 titan-titan-sysv* ) machine=titan opsys=usg5-3 ;;
1508 dnl Ustation E30 (SS5E)
1509 m68*-unisys-uniplus* ) machine=ustation opsystem=unipl5-2 ;;
1513 case "$canonical" in
1514 *-sysv[[01]]* | *-sysvr[[01]]* ) opsys=usg5-0 ;;
1515 *-sysv2* | *-sysvr2* ) opsys=usg5-2 ;;
1516 *-mach* ) opsys=mach-bsd4-3 ;;
1521 ns16k-whitechapel-* ) machine=mg1 ;;
1524 m68*-wicat-sysv* ) machine=wicat opsys=usg5-2 ;;
1526 dnl Intel 386 machines where we do not care about the manufacturer
1529 case "$canonical" in
1530 *-isc1.* | *-isc2.[[01]]* ) opsys=386-ix ;;
1531 *-isc2.2* ) opsys=isc2-2 ;;
1532 *-isc4.0* ) opsys=isc4-0 ;;
1533 *-isc4.* ) opsys=isc4-1
1534 GCC_TEST_OPTIONS=-posix
1535 NON_GCC_TEST_OPTIONS=-Xp
1537 *-isc* ) opsys=isc3-0 ;;
1538 *-esix5* ) opsys=esix5r4 NON_GNU_CPP=/usr/lib/cpp ;;
1539 *-esix* ) opsys=esix ;;
1540 *-mach* ) opsys=mach-bsd4-3 ;;
1541 *-xenix* ) opsys=xenix ;;
1542 *-sco3.2v4* ) opsys=sco4 NON_GNU_CPP=/lib/cpp ;;
1543 *-bsd386* | *-bsdi1* ) opsys=bsd386 ;;
1544 *-bsdi4* ) opsys=bsdos4 ;;
1545 *-bsdi3* ) opsys=bsdos3 ;;
1546 *-bsdi2.1* ) opsys=bsdos2-1 ;;
1547 *-bsdi2* ) opsys=bsdos2 ;;
1548 *-sco3.2v5* ) opsys=sco5 ;;
1549 *-sysv5* ) opsys=sco7 ;;
1550 *-386bsd* ) opsys=386bsd ;;
1551 *-freebsd* ) opsys=freebsd ;;
1552 *-nextstep* ) opsys=nextstep ;;
1553 *-pc-cygwin* ) opsys=cygwin32 ;;
1554 *-pc-mingw* ) opsys=mingw32 ;
1555 test -z "$with_tty" && with_tty="no";;
1556 dnl Otherwise, we fall through to the generic opsys code at the bottom.
1561 m68k-*-linux* ) machine=m68k opsys=linux ;;
1565 dnl Initialize machine from $canonical if not in our database above.
1566 test -z "$machine" && machine=`echo $canonical | sed 's/-.*$//'`
1568 dnl Initialize opsys from `uname -s` if not in our database above.
1569 test -z "$opsys" && opsys=`uname -s | tr ABCDEFGHIJKLMNOPQRSTUVWXYZ abcdefghijklmnopqrstuvwxyz`
1571 dnl Use configure-time autodetection if s&m not available
1572 if test -r "${srcdir}/src/m/${machine}.h"; then
1573 machfile="m/${machine}.h"
1574 AC_DEFINE_UNQUOTED(config_machfile, "$machfile")
1576 echo "XEmacs has no builtin knowledge of \`$machine' machines."
1577 echo "Using configure-time autodetection only."
1580 if test -r "${srcdir}/src/s/${opsys}.h"; then
1581 opsysfile="s/${opsys}.h"
1582 AC_DEFINE_UNQUOTED(config_opsysfile, "$opsysfile")
1584 echo "XEmacs has no builtin knowledge of \`$opsys' operating systems."
1585 echo "Using configure-time autodetection only."
1588 dnl --------------------------------------------------------------
1589 dnl $opsys detection complete; defaults depending on $opsys follow
1590 dnl --------------------------------------------------------------
1592 if test -z "$pdump"; then
1594 linux* ) pdump=yes ;; dnl glibc 2.3.1 seems to hose unexec
1595 darwin ) pdump=yes ;; dnl No "native" working dumper available
1596 cygwin* ) pdump=yes ;; dnl unexec is broken
1601 if test -z "$dynamic"; then
1603 hpux* | sunos4* ) dynamic=no ;;
1607 if test "$dynamic" = "yes"; then
1609 hpux* | sunos4* | sco5 ) opsys="${opsys}-shr" ;;
1610 decosf* ) ld_call_shared="-call_shared" ;;
1611 darwin ) AC_DEFINE(DLSYM_NEEDS_UNDERSCORE) ;;
1613 else dnl "$dynamic" = "no"
1616 echo "Static linking is not supported on Solaris 2."
1617 echo "Rerun configure without specifying --dynamic=no."
1619 linux ) ld_call_shared="-Bstatic" ;;
1620 decosf* ) ld_call_shared="-non_shared" ;;
1624 dnl Use xlc by default on AIX
1625 case "$opsys" in aix*) NON_GNU_CC=xlc ;; esac
1627 stack_trace_eye_catcher=`echo ${PROGNAME}_${version}_${canonical} | sed 'y/.-/__/'`
1628 AC_DEFINE_UNQUOTED(STACK_TRACE_EYE_CATCHER, $stack_trace_eye_catcher)
1630 dnl --------------------------------------------------
1631 dnl Determine the compiler, set up for feature testing
1632 dnl --------------------------------------------------
1634 dnl Sun Development environment support
1635 test "$with_sparcworks" = "yes" && with_workshop=yes # compatibility alias
1636 XE_CHECK_FEATURE_DEPENDENCY(workshop, tooltalk)
1637 if test "$with_workshop" = "yes"; then
1639 XE_ADD_OBJS(sunpro.o)
1642 if test "$with_clash_detection" != "no"; then
1643 AC_DEFINE(CLASH_DETECTION)
1644 XE_ADD_OBJS(filelock.o)
1647 dnl Choose a compiler from (in order)
1648 dnl --compiler, env var CC, with_gcc=no && ${NON_GNU_CC:-cc}, AC_PROG_CC
1649 test -n "$compiler" && CC="$compiler"
1650 if test "$with_gcc" = "no"; then dnl Try to find a non-gcc compiler
1651 case "$CC" in "" | *gcc* ) CC="${NON_GNU_CC-cc}" ;; esac
1654 dnl If we don't set CFLAGS here, AC_PROG_CC will set it.
1655 dnl But we know better what's good for us, so we do our own
1656 dnl computation of real CFLAGS later.
1657 dnl --cflags overrides environment variable CFLAGS
1658 test "${cflags-unset}" != unset && CFLAGS="$cflags"
1659 if test "${CFLAGS-unset}" != unset
1660 then cflags_specified=yes;
1661 else cflags_specified=no;
1664 xe_save_CFLAGS="$CFLAGS"
1666 AC_PROG_CC dnl Autoconf has its own magic for compiler autodetection
1668 dnl Retry using random guesswork if AC_PROG_CC got it wrong...
1669 if test "$with_gcc" = "no" -a "$GCC" = "yes"; then
1672 elif test "$with_gcc" = "yes" -a "$GCC" != "yes" ; then
1676 CFLAGS="$xe_save_CFLAGS"
1678 dnl Figure out what C preprocessor to use.
1680 dnl On Sun systems, people sometimes set up the variable CPP
1681 dnl with a value that is a directory, not an executable at all.
1682 dnl Detect that case, and ignore that value.
1683 test -n "$CPP" -a -d "$CPP" && CPP=
1685 test -n "$NON_GNU_CPP" -a "$GCC" != "yes" -a -z "$CPP" && CPP="$NON_GNU_CPP"
1689 dnl --------------------------------------------------------------------
1690 dnl Compiler feature macros
1691 dnl --------------------------------------------------------------------
1693 AC_AIX dnl Defines _ALL_SOURCE on AIX.
1695 dnl We want feature macros defined here *and* in config.h.in, so that
1696 dnl the compilation environment at configure time and compile time agree.
1698 AC_MSG_CHECKING(for GNU libc)
1699 AC_TRY_COMPILE([#include <features.h>],[
1700 #if ! (defined __GLIBC__ || defined __GNU_LIBRARY__)
1701 #error Not a GNU libc system :-(
1702 ******* ======= ******** &&&&&&&&
1704 ], have_glibc=yes, have_glibc=no)
1705 AC_MSG_RESULT($have_glibc)
1706 dnl I'm tired of pop being broken with GLIBC -slb
1707 dnl Well. then why not fix fucking pop?
1708 test "$have_glibc" = "yes" && AC_DEFINE(_GNU_SOURCE)
1710 dnl We'd like to use vendor extensions, where available.
1711 dnl We'd like to use functions from the latest Unix98 standards.
1712 dnl See http://www.opengroup.org/onlinepubs/007908799/xsh/compilation.html
1715 AC_DEFINE(__EXTENSIONS__)
1716 dnl Solaris 2 before 2.5 had some bugs with feature test macro interaction.
1717 if test "$os_release" -ge 505; then
1718 AC_DEFINE(_XOPEN_SOURCE,500)
1719 AC_DEFINE(_XOPEN_SOURCE_EXTENDED)
1722 AC_DEFINE(_POSIX_C_SOURCE,199506L)
1723 AC_DEFINE(_XOPEN_SOURCE,500)
1724 AC_DEFINE(_XOPEN_SOURCE_EXTENDED)
1728 dnl Identify compilers to enable compiler-specific hacks.
1729 dnl Add support for other compilers HERE!
1730 dnl GCC is already identified elsewhere.
1731 AC_TRY_RUN([int main () {
1732 #if defined __SUNPRO_C
1734 #elif defined __DECC
1736 #elif defined __USLC__ && defined __SCO_VERSION__
1738 #elif defined __INTEL_COMPILER
1744 [case "$conftest_rc" in
1745 11) echo "You appear to be using the SunPro C compiler." ; __SUNPRO_C=yes ;;
1746 12) echo "You appear to be using the DEC C compiler." ; __DECC=yes ;;
1747 13) echo "You appear to be using the SCO C compiler." ; __USLC__=yes ;;
1748 14) echo "You appear to be using the Intel C++ compiler."; __ICC=yes
1749 dnl Newer versions of icc claim to be GCC
1754 dnl case "$canonical" in
1755 dnl *-sun-sunos* ) test "$CPP" = "acc -E" && CPP="acc -E -Xs" ;;
1758 dnl --------------------------------------------------------------------
1759 dnl Extract some information from the operating system and machine files
1760 dnl --------------------------------------------------------------------
1762 echo "Extracting information from the machine- and system-dependent headers..."
1764 dnl It is not important that this name contain the PID; you cannot run
1765 dnl two configures in the same directory and have anything work
1767 tempcname="conftest.c"
1769 dnl CPP_to_sh(CPP_SYMBOL, SH_VAR, DEFAULT_VALUE)
1772 [#]define [$1]ifelse([$3],,, [ "$3"])
1774 configure___ [$2]=[$1]
1777 dnl CPP_boolean_to_sh(CPP_SYMBOL, SH_VAR)
1778 define([CPP_boolean_to_sh],
1780 configure___ [$2]=yes
1782 configure___ [$2]=no
1784 ])dnl CPP_boolean_to_sh
1786 cat > $tempcname < confdefs.h
1787 cat >> $tempcname <<EOF
1789 #define C_SWITCH_SITE
1790 #define C_SWITCH_X_SITE
1791 #define LD_SWITCH_SITE
1792 #define LD_SWITCH_X_SITE
1793 #define LD_SWITCH_X_SITE_AUX
1794 #define OS_RELEASE $os_release
1796 #ifdef config_opsysfile
1797 #include "$srcdir/src/$opsysfile"
1800 #ifdef config_machfile
1801 #include "$srcdir/src/$machfile"
1804 CPP_to_sh(LIBS_MACHINE, libs_machine)
1805 CPP_to_sh(LIBS_SYSTEM, libs_system)
1806 CPP_to_sh(LIBS_TERMCAP, libs_termcap)
1807 CPP_to_sh(LIB_STANDARD, libs_standard)
1809 CPP_to_sh(OBJECTS_MACHINE, objects_machine)
1810 CPP_to_sh(OBJECTS_SYSTEM, objects_system)
1812 CPP_to_sh(C_SWITCH_MACHINE, c_switch_machine)
1813 CPP_to_sh(C_SWITCH_SYSTEM, c_switch_system)
1815 CPP_to_sh(LD_SWITCH_MACHINE, ld_switch_machine)
1816 CPP_to_sh(LD_SWITCH_SYSTEM, ld_switch_system)
1818 CPP_to_sh(UNEXEC, unexec, unexec.o)
1820 CPP_to_sh(LD_SWITCH_SHARED, ld_switch_shared, -c)
1822 #define ORDINARY_LD "\$(CC) \$(CFLAGS)"
1823 configure___ ordinary_ld=ORDINARY_LD
1825 #ifdef ORDINARY_LINK
1826 #define LD ORDINARY_LD
1827 #else /* no ORDINARY LINK */
1828 #ifdef COFF_ENCAPSULATE
1829 #define LD "\$(CC) -nostdlib"
1830 #else /* not COFF_ENCAPSULATE */
1833 #else /* ! defined (LINKER) */
1835 #endif /* ! defined (LINKER) */
1836 #endif /* ! defined (COFF_ENCAPSULATE) */
1837 #endif /* not ORDINARY_LINK */
1840 CPP_to_sh(LIB_GCC, lib_gcc)
1841 CPP_to_sh(LD_TEXT_START_ADDR, ld_text_start_addr)
1843 #if ! defined (ORDINARY_LINK) && !defined (START_FILES)
1845 #ifdef COFF_ENCAPSULATE
1846 #define START_FILES "pre-crt0.o /usr/local/lib/gcc-crt0.o"
1847 #else /* ! defined (COFF_ENCAPSULATE) */
1848 #define START_FILES "pre-crt0.o /lib/crt0.o"
1849 #endif /* ! defined (COFF_ENCAPSULATE) */
1850 #else /* ! defined (NO_REMAP) */
1851 #define START_FILES "ecrt0.o"
1852 #endif /* ! defined (NO_REMAP) */
1853 #endif /* no ORDINARY_LINK */
1857 configure___ start_files=START_FILES
1859 CPP_boolean_to_sh(ORDINARY_LINK, ordinary_link)
1860 CPP_boolean_to_sh(SYSTEM_MALLOC, system_malloc)
1861 CPP_boolean_to_sh(TERMINFO, have_terminfo)
1862 dnl The MAIL_USE_xxx variables come from the s&m headers
1863 CPP_boolean_to_sh(MAIL_USE_FLOCK, mail_use_flock)
1864 CPP_boolean_to_sh(MAIL_USE_LOCKF, mail_use_lockf)
1865 CPP_boolean_to_sh(MAIL_USE_LOCKING, mail_use_locking)
1866 CPP_boolean_to_sh(HAVE_WIN32_PROCESSES, win32_processes)
1869 dnl The value of CPP is a quoted variable reference, so we need to do this
1870 dnl to get its actual value...
1871 CPP=`eval "echo $CPP $CPPFLAGS"`
1874 eval `$CPP -Isrc $tempcname \
1875 | sed -n -e "s/[ TAB]*=[ TAB\"]*/='/" -e "s/[ TAB\"]*\$/'/" -e "s/^configure___//p"`
1876 changequote([, ])dnl
1880 if test "$pdump" = "yes"; then
1889 dnl For debugging...
1890 test "$extra_verbose" = "yes" && \
1891 PRINT_VAR(libs_machine libs_system libs_termcap libs_standard
1892 objects_machine objects_system c_switch_machine c_switch_system
1893 ld_switch_machine ld_switch_system unexec ld_switch_shared
1894 ld lib_gcc ld_text_start_addr start_files ordinary_link
1895 have_terminfo mail_use_flock mail_use_lockf) && echo ""
1897 dnl Pick up mingw include path
1898 dnl We only cope with headers in mingw, not mingw32: no previous version of
1899 dnl XEmacs supported mingw and cygnus have made this incompatible change
1900 dnl so we just go with the flow.
1901 case "$opsys" in mingw* | cygwin*)
1902 cygwin_include=`eval "gcc -print-file-name=libc.a"` ;
1903 cygwin_include=`eval "dirname $cygwin_include"` ;
1904 cygwin_include="-I$cygwin_include/../include" ;
1905 extra_includes="$cygwin_include/mingw $cygwin_include" ;
1906 case "$opsys" in mingw*)
1907 XE_APPEND($extra_includes, c_switch_system) ;;
1912 dnl Non-ordinary link usually requires -lc
1913 test "$ordinary_link" = "no" -a -z "$libs_standard" && libs_standard="-lc"
1915 dnl -----------------------
1916 dnl Compiler-specific hacks
1917 dnl -----------------------
1919 dnl DEC C `-std1' means ANSI C mode
1920 test "$__DECC" = "yes" && XE_APPEND(-std1, c_switch_site)
1922 dnl Some versions of SCO native compiler need -Kalloca
1923 if test "$__USLC__" = yes; then
1924 AC_MSG_CHECKING(for whether the -Kalloca compiler flag is needed)
1926 AC_TRY_LINK([], [void *x = alloca(4);], [:], [
1927 xe_save_c_switch_system="$c_switch_system"
1928 c_switch_system="$c_switch_system -Kalloca"
1929 AC_TRY_LINK([], [void *x = alloca(4);], [ need_kalloca=yes ])
1930 c_switch_system="$xe_save_c_switch_system"])
1931 AC_MSG_RESULT($need_kalloca)
1932 test "$need_kalloca" = "yes" && XE_APPEND(-Kalloca,c_switch_system)
1935 dnl Calculate value of CFLAGS:
1936 dnl Use either command line flag, environment var, or autodetection
1937 if test "$cflags_specified" = "no"; then
1938 dnl Following values of CFLAGS are known to work well.
1939 dnl Should we take debugging options into consideration?
1940 if test "$GCC" = "yes"; then
1941 CFLAGS="-g -O3 -Wall -Wno-switch -Winline -Wmissing-prototypes"
1942 dnl Yuck, bad compares have been worth at least 3 crashes!
1943 CFLAGS="$CFLAGS -Wsign-compare"
1944 dnl XEmacs is known not to be strict-aliasing-safe.
1945 case "`gcc -v --help 2>&1`" in
1946 *-fstrict-aliasing* ) CFLAGS="$CFLAGS -fno-strict-aliasing" ;;
1948 dnl You get five zillion shadowing warnings with g++.
1949 dnl Even with gcc, -Wshadow is questionable because of its complaints
1950 dnl about parameters with the same names as global functions.
1951 if test "$xemacs_compiler" != "g++"; then
1952 CFLAGS="$CFLAGS -Wshadow"
1954 dnl glibc is intentionally not `-Wpointer-arith'-clean.
1955 dnl Ulrich Drepper has rejected patches to fix the glibc header files.
1956 test "$have_glibc" != "yes" && CFLAGS="$CFLAGS -Wpointer-arith"
1957 dnl I'm not convinced this is a good idea any more. -sb
1958 dnl test "$opsys $machine" = "linux intel386" && \
1959 dnl CFLAGS="$CFLAGS -fno-strength-reduce -malign-loops=2 -malign-jumps=2 -malign-functions=2"
1960 elif test "$__SUNPRO_C" = "yes"; then
1962 sol2 ) CFLAGS="-v -xO4" ;;
1963 sunos4* ) CFLAGS="-xO2";;
1965 elif test "$__DECC" = "yes"; then
1967 elif test "$CC" = "xlc"; then
1968 CFLAGS="-g -O3 -qstrict -qnoansialias -qlibansi -qinfo -qro -qmaxmem=20000"
1969 elif test "$__ICC" = "yes"; then
1970 CFLAGS="-g -O3 -Ob2 -Wall -W1"
1971 dnl ### Add optimal CFLAGS support for other compilers HERE!
1973 CFLAGS="-O" ;dnl The only POSIX-approved flag
1977 dnl Search for GCC specific build problems we know about
1978 if test "$GCC" = "yes"; then
1979 AC_MSG_CHECKING(for buggy gcc versions)
1980 GCC_VERSION=`$CC --version`
1981 case `uname -s`:`uname -m`:$GCC_VERSION in
1982 dnl egcs 2.90.21 (egcs-1.00 release)
1983 dnl egcs 2.90.29 (egcs-1.0.3 release)
1984 *:sun4*:2.8.1|*:sun4*:egcs-2.90.*)
1985 dnl Don't use -O2 with gcc 2.8.1 and egcs 1.0 under SPARC architectures
1986 dnl without also using `-fno-schedule-insns'.
1990 *-fno-schedule-insns*) ;;
1993 AC_MSG_WARN(Don't use -O2 with gcc 2.8.1 and egcs 1.0 under SPARC architectures)
1994 AC_MSG_WARN(without also using -fno-schedule-insns.)
1995 AC_MSG_ERROR(Aborting due to known problem)
2001 dnl egcs-2.91.57 (egcs-1.1 release)
2002 dnl egcs-2.91.66 (egcs-1.1.2 release)
2003 Linux:alpha:egcs-2.91.*)
2005 AC_MSG_WARN(There have been reports of egcs-1.1 not compiling XEmacs correctly on)
2006 AC_MSG_WARN(Alpha Linux. There have also been reports that egcs-1.0.3a is O.K.)
2007 AC_MSG_ERROR(Aborting due to known problem)
2012 case "$GCC_VERSION" in
2015 *-fno-strength-reduce*) ;;
2018 AC_MSG_WARN(Don't use -O2 with gcc 2.7.2 under Intel/XXX without also using)
2019 AC_MSG_WARN(-fno-strength-reduce.)
2020 AC_MSG_ERROR(Aborting due to known problem)
2026 *-fno-caller-saves*) ;;
2029 AC_MSG_WARN(Don't use -O2 with gcc 2.7.2 under Intel/XXX without also using)
2030 AC_MSG_WARN(-fno-caller-saves.)
2031 AC_MSG_ERROR(Aborting due to known problem)
2041 dnl GNU ld now defaults to combreloc, which screws up unexec, but not pdump.
2042 dnl Note that it's OK if the GNU style long option causes non-GNU ld to barf
2043 dnl a usage message, that's often good enough. Please report it, though.
2044 dnl #### Should make this Solaris-friendly.
2045 dnl Link with -z nocombreloc for now.
2046 if test "$pdump" != "yes"; then
2047 AC_MSG_CHECKING(for \"-z nocombreloc\" linker flag)
2048 case "`ld --help 2>&1`" in
2049 *-z\ nocombreloc* ) AC_MSG_RESULT(yes)
2050 XE_PREPEND(-z nocombreloc, ld_switch_site) ;;
2051 *) AC_MSG_RESULT(no) ;;
2056 dnl Inform compiler that certain flags are meant for the linker
2057 dnl XE_PROTECT_LINKER_FLAGS(shell_var)
2058 define([XE_PROTECT_LINKER_FLAGS], [
2059 if test "$GCC" = "yes"; then
2060 set x $[$1]; shift; [$1]=""
2061 while test -n "[$]1"; do
2063 -L | -l | -u ) [$1]="$[$1] [$]1 [$]2"; shift ;;
2064 -L* | -l* | -u* | -Wl* | -pg ) [$1]="$[$1] [$]1" ;;
2066 * ) [$1]="$[$1] -Xlinker [$]1" ;;
2071 XE_PROTECT_LINKER_FLAGS(ld_switch_system)
2072 XE_PROTECT_LINKER_FLAGS(ld_switch_machine)
2073 XE_PROTECT_LINKER_FLAGS(ld_switch_site)
2074 XE_PROTECT_LINKER_FLAGS(LDFLAGS)
2075 XE_PROTECT_LINKER_FLAGS(ld_call_shared)
2077 dnl Add s&m-determined objects (including unexec) to link line
2078 test -n "$objects_machine" && XE_ADD_OBJS($objects_machine)
2079 test -n "$objects_system" && XE_ADD_OBJS($objects_system)
2080 test -n "$unexec" && test ! "$pdump" = "yes" && XE_ADD_OBJS($unexec)
2081 test "$pdump" = "yes" && XE_ADD_OBJS(dumper.o)
2083 dnl Dynodump (Solaris 2.x, x<6)
2084 AC_MSG_CHECKING(for dynodump)
2085 if test "$unexec" != "unexsol2.o"; then
2090 XE_APPEND(dynodump, MAKE_SUBDIR)
2091 XE_APPEND(dynodump, SRC_SUBDIR_DEPS)
2093 sparc ) dynodump_arch=sparc ;;
2094 *86* ) dynodump_arch=i386 ;;
2095 powerpc ) dynodump_arch=ppc ;;
2099 dnl Feed s&m crud to src/Makefile
2101 dnl Linux/powerpc needs the following magic for some reason
2102 dnl [Not needed with YellowDog 2.3 and causes link problems with YellowDog 3.0,
2103 dnl the two most popular PowerPC distributions.]
2104 dnl test "$machine$opsys" = "powerpclinux" && start_flags="-T $srcdir/src/ppc.ldscript"
2106 if test "$unexec" = "unexaix.o"; then
2107 dnl AIX needs various hacks to make static linking work.
2108 if test "$dynamic" = "no"; then
2109 start_flags="-Wl,-bnso,-bnodelcsect"
2110 test "$GCC" = "yes" && start_flags="-B/bin/ ${start_flags}"
2111 for f in "/lib/syscalls.exp" "/lib/threads.exp"; do
2112 if test -r "$f"; then start_flags="${start_flags},-bI:${f}"; fi
2114 for f in "/usr/lpp/X11/bin/smt.exp" "/usr/bin/X11/smt.exp"; do
2115 if test -r "$f"; then start_flags="${start_flags},-bI:${f}"; break; fi
2117 AC_CHECK_LIB(C, terminateAndUnload, XE_APPEND(-lC, libs_system))
2119 elif test -n "$ld_text_start_addr"; then
2120 start_flags="-T $ld_text_start_addr -e __start"
2122 AC_SUBST(start_flags)
2124 AC_SUBST(ld_switch_shared)
2125 AC_SUBST(start_files)
2126 if test "$ordinary_link" = "no" -a "$GCC" = "yes"; then
2127 test -z "$linker" && linker='$(CC) -nostdlib'
2128 test -z "$lib_gcc" && lib_gcc='`$(CC) -print-libgcc-file-name`'
2130 test "$GCC" != "yes" && lib_gcc=
2134 dnl ---------------------------------------------------------------
2135 dnl Add site and system specific flags to compile and link commands
2136 dnl ---------------------------------------------------------------
2138 dnl Allow use of either ":" or spaces for lists of directories
2139 define(COLON_TO_SPACE,
2140 [case "$[$1]" in *:* [)] [$1]="`echo '' $[$1] | sed -e 's/^ //' -e 's/:/ /g'`";; esac])dnl
2142 dnl --site-libraries (multiple dirs)
2143 COLON_TO_SPACE(site_libraries)
2144 if test -n "$site_libraries"; then
2145 for arg in $site_libraries; do
2148 * ) test -d "$arg" || \
2149 XE_DIE("Invalid site library \`$arg': no such directory")
2152 XE_APPEND($arg, ld_switch_site)
2156 dnl --site-includes (multiple dirs)
2157 COLON_TO_SPACE(site_includes)
2158 if test -n "$site_includes"; then
2159 for arg in $site_includes; do
2162 * ) test -d "$arg" || \
2163 XE_DIE("Invalid site include \`$arg': no such directory")
2166 XE_APPEND($arg, c_switch_site)
2170 dnl --site-prefixes (multiple dirs)
2171 dnl --site-prefixes=dir1:dir2 is a convenient shorthand for
2172 dnl --site-libraries=dir1/lib:dir2/lib --site-includes=dir1/include:dir2/include
2173 dnl Site prefixes take precedence over the standard places, but not over
2174 dnl site-includes and site-libraries.
2175 COLON_TO_SPACE(site_prefixes)
2176 if test -n "$site_prefixes"; then
2177 for dir in $site_prefixes; do
2178 lib_dir="${dir}/lib"
2179 inc_dir="${dir}/include"
2180 if test ! -d "$dir"; then
2181 XE_DIE("Invalid site prefix \`$dir': no such directory")
2182 elif test ! -d "$lib_dir"; then
2183 XE_DIE("Invalid site prefix \`$dir': no such directory \`$lib_dir'")
2185 if test -d "$inc_dir"; then
2186 XE_APPEND("-I$inc_dir", c_switch_site)
2188 XE_APPEND("-L$lib_dir", ld_switch_site)
2193 dnl GNU software installs by default into /usr/local/{include,lib}
2194 dnl if test -d "/usr/local/include" -a -d "/usr/local/lib"; then
2195 dnl XE_APPEND("-L/usr/local/lib", ld_switch_site)
2196 dnl XE_APPEND("-I/usr/local/include", c_switch_site)
2199 dnl Extra system-specific library directories - please add to list
2200 for dir in "/usr/ccs/lib"; do
2201 test -d "$dir" && XE_APPEND(-L${dir}, ld_switch_system)
2204 dnl --site-runtime-libraries (multiple dirs)
2205 COLON_TO_SPACE(site_runtime_libraries)
2206 if test -n "$site_runtime_libraries"; then
2207 LD_RUN_PATH="`echo $site_runtime_libraries | sed -e 's/ */:/g'`"
2211 dnl Linux systems have dynamic runtime library directories listed in
2212 dnl /etc/ld.so.conf. Since those are used at run time, it seems pretty
2213 dnl safe to use them at link time, and less controversial than forcing
2214 dnl the run-time to use the link-time libraries. This also helps avoid
2215 dnl mismatches between the link-time and run-time libraries.
2217 dnl #### Unfortunately, there are horrible libc4 and libc5 libraries
2218 dnl listed in /etc/ld.so.conf on some systems, and including them on
2219 dnl the link path leads to linking in utterly broken libc's.
2220 dnl There are many clever ways of approaching this problem,
2221 dnl but finding one that actually works...
2223 dnl if test -z "$LD_RUN_PATH" -a -r "/etc/ld.so.conf"; then
2224 dnl for dir in `cat /etc/ld.so.conf`; do
2225 dnl test -d "$dir" && XE_APPEND(-L${dir}, ld_switch_system)
2227 dnl add_runtime_path=no
2230 dnl -------------------------------------
2231 dnl Compute runtime library path
2232 dnl -------------------------------------
2234 if test -n "$add_runtime_path"; then :;
2235 elif test "$dynamic" = "no"; then add_runtime_path=no
2236 elif test -n "$LD_RUN_PATH"; then add_runtime_path=yes
2237 else case "$opsys" in
2238 sol2 | irix* | *bsd* | decosf* ) add_runtime_path=yes ;;
2239 * ) add_runtime_path=no ;;
2243 if test "$add_runtime_path" = "yes"; then
2244 dnl Try to autodetect runtime library flag (usually -R),
2245 dnl and whether it works (or at least does no harm)
2246 AC_MSG_CHECKING("for runtime libraries flag")
2248 sol2 ) dash_r="-R" ;;
2249 decosf* | linux* | irix*) dash_r="-rpath " ;;
2252 for try_dash_r in "-R" "-R " "-rpath "; do
2253 xe_check_libs="${try_dash_r}/no/such/file-or-directory"
2254 XE_PROTECT_LINKER_FLAGS(xe_check_libs)
2255 AC_TRY_LINK(, , dash_r="$try_dash_r")
2257 test -n "$dash_r" && break
2260 if test -n "$dash_r";
2261 then AC_MSG_RESULT("\"${dash_r}\"")
2262 else AC_MSG_RESULT(NONE)
2266 xe_add_unique_runpath_dir='
2268 for xe_dir in $runpath_dirs; do dnl Uniquify
2269 test "$xe_dir" = "$xe_runpath_dir" && xe_add_p=no
2271 if test "$xe_add_p" = "yes"; then
2272 test -n "$runpath" && runpath="${runpath}:"
2273 runpath="${runpath}${xe_runpath_dir}"
2274 runpath_dirs="$runpath_dirs $xe_runpath_dir"
2278 dnl XE_ADD_RUNPATH_DIR(directory)
2279 define([XE_ADD_RUNPATH_DIR],[{
2281 dnl PRINT_VAR(ld_switch_site ld_switch_x_site runpath xe_runpath_dir LD_RUN_PATH xe_ldflags)
2282 test "$xe_runpath_dir" != "/lib" -a \
2283 "$xe_runpath_dir" != "/usr/lib" -a \
2284 -n "`ls ${xe_runpath_dir}/*.s[[ol]] 2>/dev/null`" && \
2285 eval "$xe_add_unique_runpath_dir"
2288 dnl XE_COMPUTE_RUNPATH()
2289 define([XE_COMPUTE_RUNPATH],[
2290 if test "$add_runtime_path" = "yes" -a -n "$dash_r"; then
2291 dnl Remove runtime paths from current ld switches
2292 ld_switch_site=`echo '' $ld_switch_site | sed -e 's:^ ::' -e "s/$dash_r[[^ ]]*//g"`
2293 ld_switch_x_site=`echo '' $ld_switch_x_site | sed -e 's:^ ::' -e "s/$dash_r[[^ ]]*//g"`
2294 dnl PRINT_VAR(ld_switch_site ld_switch_x_site)
2296 dnl Fix up Runtime path
2297 dnl If LD_RUN_PATH is set in environment, use that.
2298 dnl In this case, assume user has set the right value.
2299 runpath="" runpath_dirs=""
2300 if test -n "$LD_RUN_PATH"; then
2301 runpath="$LD_RUN_PATH"
2302 elif test "$GCC" = "yes"; then
2303 dnl Compute runpath from gcc's -v output
2304 ld_switch_run_save="$ld_switch_run"; ld_switch_run=""
2305 echo "int main(int argc, char *argv[[]]) {return 0;}" > conftest.c
2306 xe_runpath_link='${CC-cc} -o conftest -v $CFLAGS '"$xe_ldflags"' conftest.$ac_ext 2>&1 1>/dev/null'
2307 for arg in `eval "$xe_runpath_link" | grep ' -L'`; do
2308 case "$arg" in P,* | -L* | -R* )
2309 for dir in `echo '' "$arg" | sed -e 's:^ ::' -e 's/^..//' -e 'y/:/ /'`; do
2310 XE_ADD_RUNPATH_DIR("$dir")
2314 ld_switch_run="$ld_switch_run_save"
2317 dnl Add all directories with .so files to runpath
2318 for arg in $ld_switch_site $ld_switch_x_site; do
2319 case "$arg" in -L*) XE_ADD_RUNPATH_DIR(`echo '' "$arg" | sed -e 's:^ ::' -e 's/^-L//'`);; esac
2321 dnl Sometimes /opt/SUNWdt/lib is the only installed Motif available
2322 dnl #### this test always fails here as need_motif is null
2323 if test "$opsys $need_motif" = "sol2 yes"; then
2324 xe_runpath_dir="/opt/SUNWdt/lib";
2325 eval "$xe_add_unique_runpath_dir";
2327 fi dnl Compute $runpath
2329 if test -n "$runpath"; then
2330 ld_switch_run="${dash_r}${runpath}"
2331 XE_PROTECT_LINKER_FLAGS(ld_switch_run)
2332 test "$extra_verbose" = "yes" && echo "Setting runpath to $runpath"
2336 XE_COMPUTE_RUNPATH()
2338 dnl -----------------------------------
2339 dnl Do some misc autoconf-special tests
2340 dnl -----------------------------------
2342 dnl Do the opsystem or machine files prohibit the use of the GNU malloc?
2343 dnl Assume not, until told otherwise.
2345 if test "$with_dlmalloc" != "no"; then
2350 after_morecore_hook_exists=yes
2351 AC_CHECK_FUNC(malloc_set_state, ,doug_lea_malloc=no)
2352 AC_MSG_CHECKING(whether __after_morecore_hook exists)
2353 AC_TRY_LINK([extern void (* __after_morecore_hook)();],[__after_morecore_hook = 0],
2354 [AC_MSG_RESULT(yes)],
2356 after_morecore_hook_exists=no])
2357 if test "$system_malloc" = "yes" ; then
2360 - The GNU allocators don't work with this system configuration."
2361 elif test "$with_system_malloc" = "yes" ; then
2364 - User chose not to use GNU allocators."
2365 elif test "$with_debug_malloc" = "yes" ; then
2368 - User chose to use Debugging Malloc."
2371 if test "$doug_lea_malloc" = "yes" -a "$GNU_MALLOC" = "yes" ; then
2373 - Using Doug Lea's new malloc from the GNU C Library."
2374 AC_DEFINE(DOUG_LEA_MALLOC)
2375 if test "$after_morecore_hook_exists" = "no" ; then
2377 - Using Doug Lea's new malloc from the Linux C Library."
2378 AC_DEFINE(_NO_MALLOC_WARNING_)
2382 dnl #### mcheck is broken in all versions of Linux libc and glibc.
2383 dnl Try this again when 2.1 hits the streets.
2384 dnl Avoid using free-hook.c if support exists for malloc debugging in libc
2385 dnl have_libmcheck=no
2386 dnl if test "$error_check_malloc" = "yes" -a \
2387 dnl "$have_glibc" = "yes" -a \
2388 dnl "$doug_lea_malloc" = "yes"; then
2389 dnl AC_CHECK_HEADERS(mcheck.h)
2390 dnl AC_CHECK_LIB(mcheck, mcheck, have_libmcheck=yes, have_libmcheck=no)
2393 dnl if test "$have_libmcheck" = "yes"; then
2394 dnl AC_DEFINE(HAVE_LIBMCHECK)
2395 dnl libmcheck=-lmcheck
2396 dnl AC_SUBST(libmcheck)
2399 dnl Some other nice autoconf tests. If you add a test here which
2400 dnl should make an entry in src/config.h, do not forget to add an
2401 dnl #undef clause to src/config.h.in for autoconf to modify.
2407 dnl checks for header files
2408 AC_CHECK_HEADERS(dnl
2411 cygwin/version.h dnl
2431 dnl ----------------------------------------------------------------
2432 dnl Checking for utime() or utimes().
2433 dnl We prefer utime, since it is more standard.
2434 dnl Some systems have utime.h but do not declare the struct anyplace,
2435 dnl so we use a more sophisticated test for utime than AC_CHECK_FUNCS.
2436 dnl ----------------------------------------------------------------
2437 AC_MSG_CHECKING(for utime)
2438 AC_TRY_COMPILE([#include <sys/types.h>
2439 #include <utime.h>],
2440 [struct utimbuf x; x.actime = x.modtime = 0; utime ("/", &x);],
2442 AC_DEFINE(HAVE_UTIME)],
2444 dnl We don't have utime(); how about utimes()?
2445 AC_CHECK_FUNCS(utimes)])
2448 dnl checks for typedefs
2455 AC_CHECK_TYPE(ssize_t, int)
2457 dnl check for Unix98 socklen_t
2458 AC_MSG_CHECKING(for socklen_t)
2459 AC_TRY_COMPILE([#include <sys/types.h>
2460 #include <sys/socket.h>
2462 ],[],[AC_MSG_RESULT(yes)],[
2463 AC_TRY_COMPILE([#include <sys/types.h>
2464 #include <sys/socket.h>
2465 int accept (int, struct sockaddr *, size_t *);
2467 AC_MSG_RESULT(size_t)
2468 AC_DEFINE(socklen_t,size_t)], [
2470 AC_DEFINE(socklen_t,int)])])
2472 AC_MSG_CHECKING(for struct timeval)
2473 AC_TRY_COMPILE([#ifdef TIME_WITH_SYS_TIME
2474 #include <sys/time.h>
2477 #ifdef HAVE_SYS_TIME_H
2478 #include <sys/time.h>
2482 #endif], [static struct timeval x; x.tv_sec = x.tv_usec;],
2485 AC_DEFINE(HAVE_TIMEVAL)],
2489 dnl checks for structure members
2493 dnl checks for compiler characteristics
2496 dnl check for Make feature
2499 dnl check byte order
2502 dnl define SIZEOF_TYPE
2503 AC_CHECK_SIZEOF(short)
2504 if test "$ac_cv_sizeof_short" = 0; then
2506 echo "*** PANIC *** Configure tests are not working - compiler is broken."
2507 echo "*** PANIC *** Please examine config.log for compilation errors."
2510 AC_CHECK_SIZEOF(int)
2511 AC_CHECK_SIZEOF(long)
2512 AC_CHECK_SIZEOF(long long)
2513 AC_CHECK_SIZEOF(void *)
2515 dnl Cygwin from 1003022 has intptr_t, uintptr_t in <cygwin/types.h>
2517 cygwin* ) AC_EGREP_HEADER([typedef.*intptr_t;], [cygwin/types.h],
2519 AC_DEFINE(INTPTR_T_IN_CYGWIN_TYPES_H,1)],
2520 [AC_MSG_RESULT(no)]) ;;
2523 dnl check for long file names
2524 AC_SYS_LONG_FILE_NAMES
2526 dnl -lm is required by LISP_FLOAT_TYPE, among other things
2527 AC_CHECK_FUNC(sin, ,AC_CHECK_LIB(m, sin))
2529 dnl Floating operation support is now unconditional
2530 AC_DEFINE(LISP_FLOAT_TYPE)
2532 AC_TRY_LINK([#include <math.h>],
2533 [return atanh(1.0) + asinh(1.0) + acosh(1.0); ],
2534 AC_DEFINE(HAVE_INVERSE_HYPERBOLIC))
2536 dnl Determine type of mail locking from configure args and s&m headers
2537 AC_CHECKING(type of mail spool file locking)
2538 AC_CHECK_FUNCS(lockf flock)
2539 dnl The mail_use_xxx variables are set according to the s&m headers.
2540 test -z "$mail_locking" -a "$mail_use_flock" = "yes" && mail_locking=flock
2541 test -z "$mail_locking" -a "$mail_use_lockf" = "yes" && mail_locking=lockf
2542 test -z "$mail_locking" -a "$mail_use_locking" = "yes" && mail_locking=locking
2543 if test -z "$mail_locking"; then
2544 case "$opsys" in cygwin* | mingw*)
2549 if test "$mail_locking" = "lockf"; then AC_DEFINE(MAIL_LOCK_LOCKF)
2550 elif test "$mail_locking" = "flock"; then AC_DEFINE(MAIL_LOCK_FLOCK)
2551 elif test "$mail_locking" = "locking"; then AC_DEFINE(MAIL_LOCK_LOCKING)
2552 elif test "$mail_locking" = "pop"; then
2555 else mail_locking="dot-locking"; AC_DEFINE(MAIL_LOCK_DOT)
2557 test "$mail_locking" = "lockf" -a "$ac_cv_func_lockf" != "yes" && \
2558 XE_DIE("lockf mail locking requested but not available.")
2559 test "$mail_locking" = "flock" -a "$ac_cv_func_flock" != "yes" && \
2560 XE_DIE("flock mail locking requested but not available.")
2561 test "$mail_locking" = "locking" -a "$ac_cv_func_locking" != "yes" && \
2562 XE_DIE("locking mail locking requested but not available.")
2564 case "$opsys" in decosf*)
2565 AC_CHECK_LIB(pthreads, cma_open)
2566 test "$ac_cv_lib_pthreads_cma_open" = "yes" && \
2567 c_switch_site="$c_switch_site -threads" ;;
2570 dnl ----------------------------------------------------------------
2571 dnl Miscellaneous flags
2572 dnl ----------------------------------------------------------------
2574 AC_MSG_CHECKING(whether the -xildoff compiler flag is required)
2575 if ${CC-cc} '-###' -xildon no_such_file.c 2>&1 | grep '^[^ ]*/ild ' > /dev/null ; then
2576 if ${CC-cc} '-###' -xildoff no_such_file.c 2>&1 | grep '^[^ ]*/ild ' > /dev/null ;
2577 then AC_MSG_RESULT(no);
2578 else AC_MSG_RESULT(yes); XE_APPEND(-xildoff, ld_switch_site)
2580 else AC_MSG_RESULT(no)
2583 dnl Link with "-z ignore" on Solaris if supported
2584 if test "$opsys" = "sol2"; then
2585 if test "$os_release" -ge 506; then
2586 AC_MSG_CHECKING(for \"-z ignore\" linker flag)
2587 case "`ld -h 2>&1`" in
2588 *-z\ ignore\|record* ) AC_MSG_RESULT(yes)
2589 XE_PREPEND(-z ignore, ld_switch_site) ;;
2590 *) AC_MSG_RESULT(no) ;;
2595 dnl ----------------------
2596 dnl Choose a window system
2597 dnl ----------------------
2599 AC_CHECKING("for specified window system")
2601 dnl Autodetection of Gdk libraries and includes
2602 dnl -------------------------------------------
2603 dnl On some systems (FreeBSD springs to mind), they use
2604 dnl versions on the utility routines, so instead of gtk-config
2605 dnl you must use gtk12-config, etc, etc.
2610 if test "$with_gnome" != "no"; then
2611 AC_MSG_CHECKING(for GNOME configuration script)
2612 for possible in gnome-config
2614 possible_version=`${possible} --version 2> /dev/null`
2615 if test "x${possible_version}" != "x"; then
2616 GNOME_CONFIG="${possible}"
2622 AC_MSG_RESULT([${GNOME_CONFIG}])
2625 if test "${GNOME_CONFIG}" != "no"; then
2626 GNOME_LIBS=`${GNOME_CONFIG} --libs gnomeui`
2627 GNOME_CFLAGS=`${GNOME_CONFIG} --cflags gnomeui`
2628 AC_DEFINE(HAVE_GNOME)
2629 XE_APPEND(${GNOME_LIBS}, libs_gtk)
2630 XE_APPEND(${GNOME_CFLAGS}, c_switch_gtk)
2633 if test "$with_gtk" != "no";then
2634 AC_MSG_CHECKING(for GTK configuration script)
2635 for possible in gtk12-config gtk14-config gtk-config
2637 possible_version=`${possible} --version 2> /dev/null`
2638 if test "x${possible_version}" != "x"; then
2639 GTK_CONFIG="${possible}"
2640 case "${possible_version}" in
2641 1.0.*) AC_MSG_WARN([GTK 1.2 is required, please upgrade your version of GTK.]); with_gtk=no;;
2642 1.3.*) AC_MSG_WARN([GTK 1.3 is not supported right now]); with_gtk=no;;
2647 *) AC_MSG_WARN([Found unsupported version of GTK: $possible_version]);;
2651 AC_MSG_RESULT([${GTK_CONFIG}])
2654 if test "${GTK_CONFIG}" != "no"; then
2655 AC_MSG_CHECKING(gtk version)
2656 GTK_VERSION=`${GTK_CONFIG} --version`
2657 AC_MSG_RESULT(${GTK_VERSION})
2659 AC_MSG_CHECKING(gtk libs)
2660 GTK_LIBS=`${GTK_CONFIG} --libs`
2661 XE_APPEND(${GTK_LIBS}, libs_gtk)
2662 AC_MSG_RESULT(${GTK_LIBS})
2664 AC_MSG_CHECKING(gtk cflags)
2665 GTK_CFLAGS=`${GTK_CONFIG} --cflags`
2666 if test "$GCC" = "yes"; then
2667 GTK_CFLAGS="${GTK_CFLAGS} -Wno-shadow"
2669 XE_APPEND(${GTK_CFLAGS}, c_switch_gtk)
2670 AC_MSG_RESULT(${GTK_CFLAGS})
2672 AC_CHECK_LIB(gdk_imlib, main, XE_PREPEND(-lgdk_imlib, libs_gtk))
2673 AC_CHECK_LIB(Imlib, Imlib_init, XE_APPEND(-lImlib, libs_gtk))
2674 AC_CHECK_FUNCS(gdk_imlib_init)
2678 AC_SUBST(GTK_CONFIG)
2684 test "${with_scrollbars}" != "no" && with_scrollbars=gtk
2685 test "${with_toolbars}" != no && with_toolbars=gtk
2686 test "${with_menubars}" != "no" && with_menubars=gtk
2687 test "${with_dialogs}" != "no" && with_dialogs=gtk
2688 test "${with_widgets}" != "no" && with_widgets=gtk
2690 XE_ADD_OBJS(console-gtk.o device-gtk.o event-gtk.o frame-gtk.o)
2691 XE_ADD_OBJS(objects-gtk.o redisplay-gtk.o glyphs-gtk.o)
2692 XE_ADD_OBJS(select-gtk.o gccache-gtk.o)
2693 XE_ADD_OBJS(gtk-xemacs.o ui-gtk.o)
2695 dnl Check for libglade support (it rocks)
2696 OLD_CFLAGS="${CFLAGS}"
2697 OLD_CPPFLAGS="${CPPFLAGS}"
2698 OLD_LDFLAGS="${LDFLAGS}"
2699 CFLAGS="${GTK_CFLAGS} ${CFLAGS}"
2700 CPPFLAGS="${GTK_CFLAGS} ${CFLAGS}"
2701 LDFLAGS="${LDFLAGS} ${GTK_LIBS}"
2702 AC_CHECK_HEADERS(glade/glade.h glade.h)
2703 AC_CHECK_LIB(xml, main, XE_PREPEND(-lxml, libs_gtk))
2704 AC_CHECK_LIB(glade, main, XE_PREPEND(-lglade, libs_gtk))
2705 AC_CHECK_LIB(glade-gnome, main, XE_PREPEND(-lglade-gnome, libs_gtk))
2706 AC_EGREP_HEADER([char \*txtdomain;], [glade/glade-xml.h],
2708 AC_DEFINE(LIBGLADE_XML_TXTDOMAIN,1)],
2709 [AC_MSG_RESULT(no)])
2710 CFLAGS="${OLD_CFLAGS}"
2711 CPPFLAGS="${OLD_CPPFLAGS}"
2712 LDFLAGS="${OLD_LDFLAGS}"
2715 dnl We may eventually prefer gtk/gdk over vanilla X11...
2717 if test "$with_x11" != "no"; then
2718 dnl User-specified --x-includes or --x-libraries implies --with-x11.
2719 test "$x_includes $x_libraries" != "NONE NONE" && \
2720 window_system=x11 with_x11=yes
2722 dnl Autodetection of X11 libraries and includes
2723 dnl -------------------------------------------
2724 dnl AC_PATH_XTRA thinks it can find our X headers and includes, but
2725 dnl it often gets it wrong, so we only use it as a last resort.
2727 dnl $OPENWINHOME implies --x-includes and --x-libraries
2728 dnl Not (yet) handled by autoconf2
2729 if test "$x_includes $x_libraries" = "NONE NONE" \
2730 -a -n "$OPENWINHOME" \
2731 -a "$OPENWINHOME" != "/usr/openwin" \
2732 -a -d "$OPENWINHOME"; then
2733 test -d "$OPENWINHOME/lib" && x_libraries="$OPENWINHOME/lib"
2734 test -d "$OPENWINHOME/include" && x_includes="$OPENWINHOME/include"
2735 test -d "$OPENWINHOME/share/include" && x_includes="$OPENWINHOME/share/include"
2738 if test "$x_includes" = "NONE"; then
2739 dnl AC_PATH_XTRA often guesses /usr/include, when some other
2740 dnl include directory is a MUCH better guess (Linux, HP-UX 10.20).
2741 dnl This is a workaround for idiot (esp. HP) system vendors, who
2742 dnl provide a /usr/include/X11, but DON'T FULLY POPULATE IT.
2743 for dir in "/usr/X11" "/usr/X11R6"; do
2744 if test -d "$dir/include/X11"; then x_includes="$dir/include"; break; fi
2748 if test "$x_libraries" = "NONE"; then
2749 for dir in "/usr/X11/lib" "/usr/X11R6/lib" "/usr/lib/X11R6"; do
2750 if test -r "$dir/libX11.a"; then x_libraries="$dir"; break; fi
2754 AC_PATH_XTRA # Autoconf claims to find X library and include dirs for us.
2755 if test "$no_x" = "yes"
2756 then with_x11=no window_system=none HAVE_X_WINDOWS=no
2757 else with_x11=yes window_system=x11 HAVE_X_WINDOWS=yes
2761 dnl #### wmperry:: !x11 != NONE
2762 dnl case "$with_x11" in
2763 dnl yes ) window_system=x11 HAVE_X_WINDOWS=yes ;;
2764 dnl no ) window_system=none HAVE_X_WINDOWS=no ;;
2767 if test "$with_x11" = "yes"; then
2768 AC_DEFINE(HAVE_X_WINDOWS)
2769 XE_APPEND(lwlib, MAKE_SUBDIR)
2770 XE_APPEND(lwlib, SRC_SUBDIR_DEPS)
2773 dnl Look for Motif, but only if not found in $x_includes and $x_libraries
2774 AC_CHECK_HEADER(Xm/Xm.h, [AC_CHECK_LIB(Xm, XmStringFree, got_motif=yes)])
2776 if test "$got_motif" != "yes"; then
2777 dnl Try to find Motif/CDE/Tooltalk dirs
2778 dnl These take precedence over other X libs/includes, so PRE-pend
2779 for lib_dir in "/usr/dt/lib" "/usr/lib/Motif2.1" \
2780 "/usr/lib/Motif1.2" "/usr/lib/Motif1.1"; do
2781 inc_dir=`echo $lib_dir | sed -e 's/lib/include/'`
2782 if test -d "$lib_dir" -a -d "$inc_dir"; then
2783 case "$x_libraries" in *"$lib_dir"* ) ;; *)
2784 x_libraries="$lib_dir $x_libraries"
2785 XE_PREPEND(-L${lib_dir}, X_LIBS) ;;
2787 case "$x_includes" in "$inc_dir"* ) ;; *)
2788 x_includes="$inc_dir $x_includes"
2789 XE_PREPEND(-I${inc_dir}, X_CFLAGS) ;;
2791 break; dnl only need ONE Motif implementation!
2796 dnl Contrib X libs/includes do NOT take precedence, so AP-pend
2797 for rel in "X11R6" "X11R5" "X11R4"; do
2798 lib_dir="/usr/contrib/$rel/lib" inc_dir="/usr/contrib/$rel/include"
2799 if test -d "$lib_dir" -a -d "$inc_dir"; then
2800 case "$x_libraries" in *"$lib_dir"* ) ;; *)
2801 x_libraries="$x_libraries $lib_dir"
2802 XE_APPEND(-L${lib_dir}, X_LIBS)
2804 case "$x_includes" in "$inc_dir"* ) ;; *)
2805 x_includes="$x_includes $inc_dir"
2806 XE_APPEND(-I${inc_dir}, X_CFLAGS)
2808 break; dnl Only need ONE X11 implementation !
2812 dnl Avoid version mismatch for shared library libXm.so on osf4
2814 decosf*) if test "$GCC" = yes -a -d /usr/shlib; then XE_APPEND(-L/usr/shlib, X_LIBS); fi ;;
2817 ld_switch_x_site="$X_LIBS"
2819 XE_COMPUTE_RUNPATH()
2821 if test "$extra_verbose" = "yes"; then
2822 echo; echo "X11 compilation variables:"
2823 PRINT_VAR(x_libraries x_includes X_CFLAGS X_LIBS X_PRE_LIBS X_EXTRA_LIBS)
2827 dnl Set up bitmaps search path.
2828 dnl The original suggestion was to unconditionally to append X11/bitmaps
2829 dnl to each element of $x_includes, I'm pretty sure this is the wrong
2830 dnl thing to do. We test for bitmaps and X11/bitmaps directories on each
2831 dnl element and add them to BITMAPDIR if they exist.
2833 if test "$x_includes" != NONE; then
2834 for i in $x_includes; do
2835 if test -d "$i/bitmaps"; then
2836 bitmapdirs="$i/bitmaps:$bitmapdirs"
2838 if test -d "$i/X11/bitmaps"; then
2839 bitmapdirs="$i/X11/bitmaps:$bitmapdirs"
2842 bitmapdirs=`echo "$bitmapdirs" | sed s/.$//`
2844 test ! -z "$bitmapdirs" && AC_DEFINE_UNQUOTED(BITMAPDIR, "$bitmapdirs")
2846 dnl Autodetect defines extracted from X config by xmkmf, e.g. NARROWPROTO
2847 AC_CHECKING(for X defines extracted by xmkmf)
2849 if mkdir conftestdir; then
2851 cat > Imakefile <<'EOF'
2853 @echo ${PROTO_DEFINES} ${STD_DEFINES}
2855 if (xmkmf) >/dev/null 2>/dev/null && test -f Makefile; then
2856 # GNU make sometimes prints "make[1]: Entering...", which would confuse us.
2857 xmkmf_defines=`${MAKE-make} xetest 2>/dev/null | grep -v make`
2861 for word in $xmkmf_defines; do
2865 sym=`echo '' $word | sed -e 's:^ *-D::' -e 's:=.*::'`
2867 -D*=* ) val=`echo '' $word | sed -e 's:^.*=::'` ;;
2870 dnl Avoid re-AC_DEFINE-ing xmkmf symbols we've already defined above.
2871 if grep "^#define $sym " confdefs.h >/dev/null; then :; else
2872 if test "$val" = "1"
2873 then AC_DEFINE_UNQUOTED($sym)
2874 else AC_DEFINE_UNQUOTED($sym,$val)
2881 dnl make sure we can find Intrinsic.h
2882 AC_CHECK_HEADER(X11/Intrinsic.h, ,
2883 [AC_MSG_ERROR("Unable to find X11 header files.")])
2885 dnl -lXt and -lX11 are required
2886 dnl Some broken systems require the magic "-b i486-linuxaout" flag
2887 AC_CHECK_LIB(X11, XOpenDisplay, have_lib_x11=yes)
2888 if test "$have_lib_x11" != "yes"; then
2889 AC_CHECK_LIB(X11, XGetFontProperty,
2890 ld_switch_x_site="-b i486-linuxaout $ld_switch_x_site",
2891 [AC_MSG_ERROR("Unable to find X11 libraries.")],
2895 test "$extra_verbose" = "yes" && echo " Setting libs_x to \"-lX11\""
2897 dnl Autodetect -lXext
2898 AC_CHECK_LIB(Xext, XShapeSelectInput, XE_PREPEND(-lXext, libs_x))
2901 AC_CHECK_LIB(Xt, XtOpenDisplay, XE_PREPEND(-lXt, libs_x),
2902 AC_MSG_ERROR("Unable to find X11 libraries."))
2904 AC_MSG_CHECKING(the version of X11 being used)
2905 AC_TRY_RUN([#include <X11/Intrinsic.h>
2906 int main(int c, char *v[]) { return c>1 ? XlibSpecificationRelease : 0; }],
2907 [./conftest foobar; x11_release=$?],[x11_release=4],[x11_release=4])
2908 AC_MSG_RESULT(R${x11_release})
2909 AC_DEFINE_UNQUOTED(THIS_IS_X11R${x11_release})
2911 if test "${x11_release}" = "4"; then
2912 case "$with_widgets" in
2913 "" | "no") with_widgets=no ;;
2914 *) XE_DIE("Widget support requires X11R5 or greater") ;;
2918 AC_CHECK_FUNCS(XConvertCase XtRegisterDrawable)
2920 AC_CHECK_HEADERS(X11/Xlocale.h)
2922 dnl XFree86 has a non-standard prototype for this X11R6 function
2923 AC_CHECK_FUNCS(XRegisterIMInstantiateCallback)
2924 AC_MSG_CHECKING(for standard XRegisterIMInstantiateCallback prototype)
2926 #define NeedFunctionPrototypes 1
2927 #include <X11/Xlib.h>
2928 extern Bool XRegisterIMInstantiateCallback(
2929 Display*, struct _XrmHashBucketRec*, char*, char*, XIMProc, XPointer*);
2931 [AC_MSG_RESULT(yes)],
2933 AC_DEFINE(XREGISTERIMINSTANTIATECALLBACK_NONSTANDARD_PROTOTYPE)])
2935 dnl autodetect -lXmu
2936 test -z "$with_xmu" && { AC_CHECK_LIB(Xmu, XmuReadBitmapDataFromFile,
2937 with_xmu=yes, with_xmu=no) }
2938 if test "$with_xmu" = "no"; then
2941 XE_PREPEND(-lXmu, libs_x)
2945 dnl Autodetect -lXbsd
2946 dnl #### Someone, please add a better function than main
2947 AC_CHECK_LIB(Xbsd, main, XE_PREPEND(-lXbsd, libs_x))
2949 dnl Problem with the MIT distribution of X on AIX
2950 if test "$unexec" = "unexaix.o" -a "$x11_release" = "6"; then
2951 dnl X11R6 requires thread-safe code on AIX for some reason
2952 if test "$GCC" = "yes"; then
2953 dnl gcc changed the name of the `-mthreads' option to `-pthread'
2955 AC_MSG_CHECKING(for name of AIX gcc threads option)
2956 case `$CC -v --help 2>&1` in
2957 *-mthreads*) aix_threads=-mthreads ;;
2958 *) aix_threads=-pthread ;;
2960 AC_MSG_RESULT($aix_threads)
2961 XE_PREPEND($aix_threads, X_CFLAGS)
2962 XE_PREPEND($aix_threads, libs_x)
2964 dnl Try to use the thread-safe "_r" versions of xlc
2965 case "$CC" in *_r) : ;;
2969 AC_CHECK_SIZEOF(short)
2970 test "$ac_cv_sizeof_short" = 0 && CC="$xe_save_CC" ;;
2975 fi dnl $with_x11 = yes
2977 if test "$with_msw" != "no"; then
2978 AC_CHECKING(for MS-Windows)
2979 AC_CHECK_LIB(gdi32,main,with_msw=yes)
2980 if test "$with_msw" = "yes"; then
2981 AC_DEFINE(HAVE_MS_WINDOWS)
2983 dnl The net installer only works with MS-Windows currently
2984 if test "$with_netinstall" = "yes"; then
2985 XE_APPEND(netinstall, MAKE_SUBDIR)
2986 XE_APPEND(netinstall, SRC_SUBDIR_DEPS)
2987 XE_APPEND(netinstall, INSTALL_ARCH_DEP_SUBDIR)
2990 install_pp="$srcdir/lib-src/installexe.sh"
2991 XE_APPEND(-lshell32 -lgdi32 -luser32 -lcomdlg32 -lcomctl32 -lkernel32 -lwinspool, libs_system)
2992 test "$with_dragndrop" != no && XE_APPEND(msw, dragndrop_proto)
2993 if test "$window_system" != x11; then
2995 test "$with_scrollbars" != "no" && with_scrollbars=msw \
2996 && XE_ADD_OBJS(scrollbar-msw.o)
2997 test "$with_menubars" != "no" && with_menubars=msw \
2998 && XE_ADD_OBJS(menubar-msw.o)
2999 test "$with_toolbars" != "no" && with_toolbars=msw \
3000 && XE_ADD_OBJS(toolbar-msw.o)
3001 test "$with_dialogs" != "no" && with_dialogs=msw \
3002 && XE_ADD_OBJS(dialog-msw.o)
3003 test "$with_widgets" != "no" && with_widgets=msw
3005 test "$with_scrollbars" != "no" && XE_ADD_OBJS(scrollbar-msw.o)
3006 test "$with_menubars" != "no" && XE_ADD_OBJS(menubar-msw.o)
3007 test "$with_toolbars" != "no" && XE_ADD_OBJS(toolbar-msw.o)
3008 test "$with_dialogs" != "no" && XE_ADD_OBJS(dialog-msw.o)
3010 dnl check for our special version of select
3011 AC_TRY_RUN([#include <fcntl.h>
3012 int main() { return (open("/dev/windows", O_RDONLY, 0) > 0)? 0 : 1; }],
3013 [need_event_unixoid=yes; AC_DEFINE(HAVE_MSG_SELECT)])
3014 with_file_coding=yes
3015 XE_ADD_OBJS(console-msw.o device-msw.o event-msw.o frame-msw.o objects-msw.o select-msw.o redisplay-msw.o glyphs-msw.o gui-msw.o)
3019 AC_SUBST(install_pp)
3021 test -z "$window_system" && window_system="none"
3023 dnl Test for features that require a window system - ANY window system
3024 if test "$window_system" = "none"; then
3025 for feature in menubars scrollbars toolbars dialogs dragndrop xface
3027 if eval "test -n \"\$with_${feature}\" -a \"\$with_${feature}\" != no" ; then
3028 AC_MSG_WARN([--with-$feature ignored: Not valid without window system support])
3030 eval "with_${feature}=no"
3033 test -z "$with_toolbars" && with_toolbars=yes
3036 dnl ### Test for features that require mswindows support - currently none
3037 dnl ### MS-Windows folks: add code here..... (martin)
3038 if test "$with_msw" != "yes"; then
3039 for feature in MARTIN_IS_CLUELESS_ABOUT_MSW_FEATURES
3041 if eval "test -n \"\$with_${feature}\" -a \"\$with_${feature}\" != no" ; then
3042 AC_MSG_WARN([--with-$feature ignored: Not valid without MS-Windows support])
3044 eval "with_${feature}=no"
3050 dnl Test for features that require X11 support
3051 if test "$with_x11" != "yes"; then
3052 dnl It ought to be reasonable to have no output device at all, and only use
3053 dnl XEmacs in --batch mode.
3054 dnl if test "$with_tty" = "no" ; then
3055 dnl AC_MSG_ERROR([No window system support and no TTY support - Unable to proceed.])
3057 for feature in tooltalk cde offix wmcommand xim xmu nas_sound
3059 if eval "test -n \"\$with_${feature}\" -a \"\$with_${feature}\" != no" ; then
3060 AC_MSG_WARN([--with-$feature ignored: Not valid without X support])
3062 eval "with_${feature}=no"
3066 dnl Balloon Help requires the Shape extension, not available everywhere,
3067 dnl for example not on AIX 4.3.
3068 if test "$with_x11" = "yes"; then
3069 AC_CHECK_HEADER(X11/extensions/shape.h, [
3070 AC_DEFINE(HAVE_BALLOON_HELP)
3071 XE_ADD_OBJS(balloon_help.o balloon-x.o)])
3074 dnl FSF 19.29 has some bitmapdir stuff here.
3077 case "$window_system" in
3078 x11 ) HAVE_X_WINDOWS=yes; echo " Using X11." ;;
3079 msw ) HAVE_X_WINDOWS=no ; echo " Using MS-Windows." ;;
3082 test "$with_gnome" = "yes" && echo " Using GNOME."
3083 test "$with_gnome" = "no" && echo " Using GTK."
3085 none ) HAVE_X_WINDOWS=no ; echo " Using no window system." ;;
3088 case "$x_libraries" in *X11R4* )
3089 test "$opsys" = "hpux9" && opsysfile="s/hpux9-x11r4.h"
3090 test "$opsys" = "hpux9-shr" && opsysfile="s/hpux9shxr4.h"
3093 dnl Enable or disable proper handling of WM_COMMAND
3094 AC_CHECKING(for WM_COMMAND option);
3095 dnl if test "$with_wmcommand" = "yes"; then
3096 if test "$with_wmcommand" != "no"; then
3097 AC_DEFINE(HAVE_WMCOMMAND)
3100 dnl Autodetect Xauth
3101 dnl -lXau is only used by gnuclient, so use a special variable for Xauth X libs
3102 test -z "$with_xauth" && test "$window_system" = "none" && with_xauth=no
3103 test -z "$with_xauth" && { AC_CHECK_HEADER(X11/Xauth.h, ,with_xauth=no) }
3104 test -z "$with_xauth" && { AC_CHECK_LIB(Xau, XauGetAuthByAddr,[:],with_xauth=no) }
3105 test -z "$with_xauth" && with_xauth=yes
3106 if test "$with_xauth" = "yes"; then
3107 AC_DEFINE(HAVE_XAUTH)
3108 XE_SPACE(libs_xauth, $GTK_LIBS $X_EXTRA_LIBS -lXau $libs_x $X_PRE_LIBS)
3110 AC_SUBST(libs_xauth)
3112 dnl This one is for the static initializeds variables in
3113 dnl offix.c, so that the thing is dumped after lastfile.o
3116 dnl Autodetect tooltalk
3117 if test "$with_tooltalk" != "no" ; then
3118 dnl autodetect the location of tt_c.h
3119 dnl tt_c.h might be in Tt or desktop include directories
3120 for dir in "" "Tt/" "desktop/" ; do
3121 AC_CHECK_HEADER(${dir}tt_c.h, tt_c_h_file="${dir}tt_c.h"; break)
3123 if test -z "$tt_c_h_file"; then
3124 if test "$with_tooltalk" = "yes"; then
3125 USAGE_ERROR("Unable to find required tooltalk header files.")
3130 if test "$with_tooltalk" != "no" ; then
3131 for extra_libs in "" "-lI18N -lce" "-lcxx"; do
3132 AC_CHECK_LIB(tt, tt_message_create,
3133 tt_libs="-ltt $extra_libs"; break, [:],$extra_libs)
3135 if test -z "$tt_libs"; then
3136 if test "$with_tooltalk" = "yes"; then
3137 USAGE_ERROR("Unable to find required tooltalk libraries.")
3142 test -z "$with_tooltalk" && with_tooltalk=yes
3143 if test "$with_tooltalk" = "yes"; then
3145 AC_DEFINE_UNQUOTED(TT_C_H_FILE, "$tt_c_h_file")
3146 XE_PREPEND($tt_libs, libs_x)
3147 XE_ADD_OBJS(tooltalk.o)
3151 test -z "$with_cde" && { AC_CHECK_HEADER(Dt/Dt.h, , with_cde=no) }
3152 test -z "$with_cde" && { AC_CHECK_LIB(DtSvc, DtDndDragStart, [:], with_cde=no) }
3153 test -z "$with_cde" && with_cde=yes
3154 if test "$with_dragndrop" = no; then
3155 AC_MSG_WARN([No CDE without generic Drag'n'Drop support])
3158 if test "$with_cde" = "yes" ; then
3160 XE_PREPEND(-lDtSvc, libs_x)
3161 XE_APPEND(CDE, dragndrop_proto)
3162 with_tooltalk=yes # CDE requires Tooltalk
3163 need_motif=yes # CDE requires Motif
3166 dnl Always compile OffiX unless --without-offix is given, no
3167 dnl X11 support is compiled in, no standard Xmu is available,
3168 dnl or dragndrop support is disabled
3169 dnl Because OffiX support currently loses when more than one display
3170 dnl is in use, we now disable it by default -slb 07/10/1998.
3171 test "$window_system" != "x11" && with_offix=no
3172 if test "$with_xmu" != yes -a "$with_x11" = yes; then
3173 AC_MSG_WARN([No OffiX without real Xmu support])
3176 if test "$with_dragndrop" = no; then
3177 AC_MSG_WARN([No OffiX without generic Drag'n'Drop support])
3180 if test "$with_cde" = yes; then
3181 AC_MSG_WARN([CDE already found, disabling OffiX support])
3184 test -z "$with_offix" && with_offix=no
3185 if test "$with_offix" = "yes"; then
3186 AC_DEFINE(HAVE_OFFIX_DND)
3187 XE_APPEND(offix.o, dnd_objs)
3188 XE_APPEND(OffiX, dragndrop_proto)
3190 if test "$with_gtk" = "yes"; then
3191 XE_APPEND(GTK, dragndrop_proto)
3194 dnl Autodetect Drag'n'Drop support
3195 dnl always included if CDE, Offix, or MSWindows are defined
3196 if test "$with_dragndrop" != "no" ; then
3197 AC_MSG_CHECKING(if drag and drop API is needed)
3198 if test -n "$dragndrop_proto" ; then
3200 AC_MSG_RESULT([yes (${dragndrop_proto} )])
3201 AC_DEFINE(HAVE_DRAGNDROP)
3202 XE_APPEND(dragdrop.o, extra_objs)
3210 AC_CHECKING(for LDAP)
3211 test -z "$with_ldap" && { AC_CHECK_HEADER(ldap.h, ,with_ldap=no) }
3212 test -z "$with_ldap" && { AC_CHECK_HEADER(lber.h, ,with_ldap=no) }
3213 if test no != "$with_ldap";then
3214 if test . != "${ldap_libs+.}";then
3216 AC_CHECK_FUNC(ldap_open,dnl Allow it to be in generic "$LIBS"
3218 test yes = "$extra_verbose" &&
3219 echo "Setting ldap_libs to $ldap_libs"],dnl
3220 [AC_CHECK_LIB(ldap, ldap_open,dnl
3222 dnl If logic of setting these vars change, change it the same way below.
3223 [ldap_needs_lber=yes ldap_other_libs=-llber
3224 dnl This requires `AC_CACHE_VAL' (which is called by `AC_CHECK_LIB')
3225 dnl to be redefined to ignore cached (shell variable) value, as it is
3226 dnl done above, because the same variable is used in all
3227 dnl `AC_CHECK_LIB' expansions in macro invocation below. Worse, if it
3228 dnl is not done, there is no portable way to compensate for this
3229 dnl locally since `unset' command is not supported by all shells. The
3230 dnl other solution would be changing `AC_CHECK_LIB' so that cache
3231 dnl variable name depends on the macro OTHER-LIBRARIES argument.
3232 AC_CHECK_LIB(ldap, ldap_open,dnl
3234 [ldap_needs_krb=yes ldap_other_libs="$ldap_other_libs -lkrb"
3235 AC_CHECK_LIB(ldap, ldap_open,dnl
3237 [ldap_needs_des=yes ldap_other_libs="$ldap_other_libs -ldes"
3238 AC_CHECK_LIB(ldap, ldap_open,dnl
3241 $ldap_other_libs)],dnl
3242 $ldap_other_libs)],dnl
3244 if test yes = "$with_ldap" -a yes != "$ldap_needs_lber";then
3245 dnl Need this check since `LDAP_OPT_ON' is (currently) used only with
3246 dnl `ldap_set_option', and the latter may not exist at all, for which
3247 dnl is testing later. So `LDAP_OPT_ON' is not necessarily defined.
3248 AC_CACHE_CHECK([for LDAP_OPT_ON definition],xe_cv_have_LDAP_OPT_ON,
3253 /* Relying on const defined by ac_c_const (upper case). */
3254 const void *const v = LDAP_OPT_ON;
3255 #else /* !defined (LDAP_OPT_ON) */
3257 #endif /* !defined (LDAP_OPT_ON) */],[],
3258 [xe_cv_have_LDAP_OPT_ON=yes],
3259 [xe_cv_have_LDAP_OPT_ON=no])])
3260 if test yes = "$xe_cv_have_LDAP_OPT_ON";then
3261 AC_CACHE_CHECK([LDAP_OPT_ON linking],
3262 xe_cv_LDAP_OPT_ON_links,
3263 [xe_save_LIBS="$LIBS"
3268 const void *const v = LDAP_OPT_ON;],[],
3269 xe_cv_LDAP_OPT_ON_links=yes,
3270 xe_cv_LDAP_OPT_ON_links=no)
3271 LIBS="$xe_save_LIBS"])
3272 dnl In some openldap installations other `ldap_*' functions link with
3273 dnl `-lldap' alone, but `LDAP_OPT_ON' requires `-llber'.
3274 if test yes != "$xe_cv_LDAP_OPT_ON_links";then
3275 ldap_needs_lber=yes ldap_other_libs=-llber
3276 AC_CACHE_CHECK([LDAP_OPT_ON linking with -llber],
3277 xe_cv_LDAP_OPT_ON_links_w_lber,
3278 [xe_save_LIBS="$LIBS"
3279 LIBS="-lldap $ldap_other_libs $LIBS"
3283 const void *const v = LDAP_OPT_ON;],[],
3284 xe_cv_LDAP_OPT_ON_links_w_lber=yes,
3285 xe_cv_LDAP_OPT_ON_links_w_lber=no)
3286 LIBS="$xe_save_LIBS"])
3287 if test yes != "$xe_cv_LDAP_OPT_ON_links_w_lber";then
3293 if test yes = "$with_ldap";then
3294 if test yes = "$ldap_needs_des";then
3295 XE_PREPEND(-ldes, ldap_libs)
3297 if test yes = "$ldap_needs_krb";then
3298 XE_PREPEND(-lkrb, ldap_libs)
3300 if test yes = "$ldap_needs_lber";then
3301 XE_PREPEND(-llber, ldap_libs)
3303 XE_PREPEND(-lldap, ldap_libs)
3306 dnl Allow builder to override "$ldap_libs".
3307 save_LIBS="$LIBS" LIBS="$ldap_libs $LIBS"
3308 AC_CHECK_FUNC(ldap_open,dnl
3310 test yes = "$extra_verbose" &&
3311 echo "Setting ldap_libs to $ldap_libs"],dnl
3316 if test "$with_ldap" = "yes"; then
3317 AC_DEFINE(HAVE_LDAP)
3318 XE_ADD_OBJS(eldap.o)
3319 LIBS="$ldap_libs $LIBS"
3320 AC_CHECK_FUNCS(ldap_set_option ldap_get_lderrno ldap_result2error ldap_parse_result)
3323 dnl Autodetect PostgreSQL
3324 dnl On many Linux systems, PostgreSQL is packaged to be installed in /usr;
3325 dnl in this case, configure will easily detect it there.
3327 dnl If PostgreSQL is installed into a different prefix,
3328 dnl (such as the default /usr/local/pgsql when building from source),
3329 dnl that prefix must be specified using the --site-prefixes flag.
3330 if test "$with_postgresql" != "no"; then
3331 AC_CHECKING(for PostgreSQL)
3333 dnl Look for these standard header file locations, known to be used on Linux
3334 for header_dir in "" "pgsql/" "postgresql/"; do
3335 AC_CHECK_HEADER(${header_dir}libpq-fe.h,
3336 libpq_fe_h_file=${header_dir}libpq-fe.h; break)
3339 test -n "$libpq_fe_h_file" && { AC_CHECK_LIB(pq,PQconnectdb,have_libpq=yes) }
3341 if test -n "$libpq_fe_h_file" -a "$have_libpq" = "yes"; then
3343 AC_DEFINE(HAVE_POSTGRESQL)
3344 AC_CHECK_LIB(pq,PQconnectStart, [
3345 with_postgresqlv7=yes;
3346 AC_DEFINE(HAVE_POSTGRESQLV7)])
3347 AC_DEFINE_UNQUOTED(LIBPQ_FE_H_FILE, "$libpq_fe_h_file")
3348 XE_PREPEND(-lpq, LIBS)
3349 XE_ADD_OBJS(postgresql.o)
3350 elif test "$with_postgresql" = "yes"; then
3351 XE_DIE("Required PostgreSQL support cannot be provided. Check --site-prefixes.")
3355 dnl ----------------------
3356 dnl Graphics libraries
3357 dnl ----------------------
3359 if test "$window_system" != "none"; then
3360 AC_CHECKING(for graphics libraries)
3362 dnl add special code to handle xpm-nox on Cygwin (csw)
3363 dnl -- should only happen if CYGWIN && WITH_XPM && WITH_MSW && !WITH_X
3368 cygwin_top=`eval "gcc -print-file-name=libc.a"` ;
3369 cygwin_top=`eval "dirname ${cygwin_top}"`;
3370 cygwin_top="${cygwin_top}/..";
3371 case "$window_system" in
3372 dnl use "standard" search pattern
3374 dnl hardcode "standard" non-X11 xpm lib/inc dirs
3375 msw) libpath_xpm="-L${cygwin_top}/lib/noX"
3376 incpath_xpm="-I${cygwin_top}/include/noX"
3378 dnl not supported on cygwin (yet?)
3380 dnl probably not reached...
3386 dnl use "standard" search pattern for all other OS's
3391 if test -z "$with_xpm"; then
3392 XE_PREPEND("$incpath_xpm", CFLAGS)
3393 XE_PREPEND("$libpath_xpm", LDFLAGS)
3394 AC_MSG_CHECKING(for Xpm - no older than 3.4f)
3396 AC_TRY_RUN([#define XPM_NUMBERS
3397 #include <X11/xpm.h>
3398 int main(int c, char **v) {
3400 XpmIncludeVersion != XpmLibraryVersion() ? 1 :
3401 XpmIncludeVersion < 30406 ? 2 : 0 ;}],
3402 [./conftest dummy_arg; xpm_status=$?;
3403 if test "$xpm_status" = "0"; then
3407 if test "$xpm_status" = "1"; then
3408 xpm_problem="Xpm library version and header file version don't match!"
3409 elif test "$xpm_status" = "2"; then
3410 xpm_problem="Xpm library version is too old!"
3412 xpm_problem="Internal xpm detection logic error!"
3415 *** WARNING *** $xpm_problem
3416 I'm not touching that with a 10-foot pole!
3417 If you really want to use the installed version of Xpm, rerun
3418 configure and add '--with-xpm=yes', but don't blame me if XEmacs crashes!"
3422 AC_MSG_RESULT($with_xpm)
3424 if test "$with_xpm" = "yes"; then
3425 dnl #### This code assumes that if AC_CHECK_LIB fails,
3426 dnl #### then it will succeed if FOR_MSW is defined,
3427 dnl #### but doesn't actually verify this assumption.
3429 XE_PREPEND("$libpath_xpm", LDFLAGS)
3430 XE_PREPEND(-lXpm, libs_x)
3431 XE_PREPEND("$incpath_xpm", CFLAGS)
3432 AC_MSG_CHECKING(for \"FOR_MSW\" xpm)
3434 AC_TRY_LINK(, [XpmCreatePixmapFromData()],
3438 AC_MSG_RESULT($xpm_for_msw)
3439 if test "$xpm_for_msw" = "yes"; then
3444 dnl Autodetect XFACE
3445 test -z "$with_xface" && { AC_CHECK_HEADER(compface.h, ,with_xface=no) }
3446 test -z "$with_xface" && { AC_CHECK_LIB(compface, UnGenFace,[:] ,with_xface=no) }
3447 test -z "$with_xface" && with_xface=yes
3448 if test "$with_xface" = "yes"; then
3449 AC_DEFINE(HAVE_XFACE)
3450 XE_PREPEND(-lcompface, libs_x)
3453 dnl For a brief period we had the GIF code split out into a separate library,
3454 dnl but patent problems, etc. sort of squashed that idea.
3455 dnl We default to building with builtin GIF decoding
3456 if test "$with_gif" != "no"; then
3459 XE_ADD_OBJS(dgif_lib.o gif_io.o)
3462 dnl Too many stupid linkers can't detect cascaded lib dependencies until runtime
3463 dnl So we always search for libz compression support.
3464 if test "$with_png $with_tiff" != "no no"; then
3465 AC_CHECK_LIB(c, inflate, [:], [
3466 AC_CHECK_LIB(z, inflate, [XE_PREPEND(-lz, libs_x)],[
3467 AC_CHECK_LIB(gz, inflate, [XE_PREPEND(-lgz, libs_x)])])])
3471 test -z "$with_jpeg" && { AC_CHECK_HEADER(jpeglib.h, ,with_jpeg=no) }
3472 test -z "$with_jpeg" && { AC_CHECK_LIB(jpeg, jpeg_destroy_decompress,[:],with_jpeg=no) }
3473 test -z "$with_jpeg" && with_jpeg=yes
3474 if test "$with_jpeg" = "yes"; then
3475 AC_DEFINE(HAVE_JPEG)
3476 XE_PREPEND(-ljpeg, libs_x)
3481 test -z "$with_png" && { AC_CHECK_FUNC(pow, ,with_png=no) }
3482 test -z "$with_png" && { AC_CHECK_HEADER(png.h, ,with_png=no) }
3483 test -z "$with_png" && { AC_CHECK_LIB(png, png_read_image,[:],with_png=no) }
3484 if test -z "$with_png"; then
3485 AC_MSG_CHECKING(for workable png version information)
3486 xe_check_libs="-lpng -lz"
3487 AC_TRY_RUN([#include <png.h>
3488 int main(int c, char **v) {
3489 if (c == 1) return 0;
3490 if (strcmp(png_libpng_ver, PNG_LIBPNG_VER_STRING) != 0) return 1;
3491 return (PNG_LIBPNG_VER < 10002) ? 2 : 0 ;}],
3492 [./conftest dummy_arg; png_status=$?;
3493 if test "$png_status" = "0"; then
3497 if test "$png_status" = "1"; then
3498 png_problem="PNG library version and header file don't match!"
3499 elif test "$png_status" = "2"; then
3500 png_problem="PNG library version too old (pre 1.0.2)!"
3503 *** WARNING *** $png_problem
3504 I'm not touching that with a 10-foot pole!
3505 If you really want to use the installed version of libPNG, rerun
3506 configure and add '--with-png=yes', but don't blame me if XEmacs crashes!"
3510 AC_MSG_RESULT($with_png)
3512 if test "$with_png" = "yes"; then
3514 XE_PREPEND(-lpng, libs_x)
3518 test -z "$with_tiff" && { AC_CHECK_HEADER(tiffio.h, ,with_tiff=no) }
3519 test -z "$with_tiff" && { AC_CHECK_LIB(tiff, TIFFClientOpen,[:],with_tiff=no) }
3520 test -z "$with_tiff" && with_tiff=yes
3521 if test "$with_tiff" = "yes"; then
3522 AC_DEFINE(HAVE_TIFF)
3523 XE_PREPEND(-ltiff, libs_x)
3527 dnl ----------------------
3528 dnl GTK-Specific Graphics libraries
3529 dnl ----------------------
3531 if test "$with_gtk" = "yes"; then
3532 dnl Autodetect XFACE
3533 test -z "$with_xface" && { AC_CHECK_HEADER(compface.h, ,with_xface=no) }
3534 test -z "$with_xface" && { AC_CHECK_LIB(compface, UnGenFace,[:] ,with_xface=no) }
3535 test -z "$with_xface" && with_xface=yes
3536 if test "$with_xface" = "yes"; then
3537 AC_DEFINE(HAVE_XFACE)
3538 XE_PREPEND(-lcompface, libs_gtk)
3543 dnl ----------------------
3544 dnl X-Specific Graphics libraries
3545 dnl ----------------------
3547 if test "$with_x11" = "yes"; then
3548 AC_CHECKING(for X11 graphics libraries)
3551 if test "$with_x11" = "yes"; then
3552 AC_CHECKING(for the Athena widgets)
3554 dnl What in heck did the user actually want?
3555 case "$with_athena" in
3556 dnl This is the default, old fashioned flat Athena.
3557 "xaw" | "") athena_variant=Xaw athena_3d=no ;;
3558 "3d") athena_variant=Xaw3d athena_3d=yes ;;
3559 "next") athena_variant=neXtaw athena_3d=yes ;;
3560 "95") athena_variant=Xaw95 athena_3d=yes ;;
3561 "xpm") athena_variant=XawXpm athena_3d=yes ;;
3562 *) XE_DIE("Unknown Athena widget set \`$with_athena'. This should not happen.") ;;
3565 athena_3d_function=Xaw3dComputeBottomShadowRGB
3567 dnl Search for the Athena library...
3568 if test "$athena_3d" = "no"; then
3569 AC_CHECK_LIB($athena_variant, XawScrollbarSetThumb,
3571 dnl Must not be a 3d library...
3572 AC_CHECK_LIB($athena_variant, $athena_3d_function,
3573 AC_MSG_WARN("Could not find a non-3d Athena widget library."),
3574 athena_lib=$athena_variant)
3576 AC_MSG_WARN("Could not find an Athena widget library."))
3578 dnl The real configuration, need 3d library
3579 AC_CHECK_LIB($athena_variant, $athena_3d_function, athena_lib=$athena_variant,
3580 dnl OK, couldn't find it with a proper name, try the standard Athena lib
3581 dnl If that is 3d, presume the user asked for what they have installed.
3582 AC_CHECK_LIB(Xaw, $athena_3d_function,
3585 AC_MSG_WARN("Assuming that libXaw is actually $athena_variant.");
3587 AC_MSG_WARN("Could not find a 3d Athena widget library that looked like $athena_variant.")))
3590 dnl Now we locate the Athena headers that we need.
3591 if test "$athena_3d" = "no"; then
3592 AC_CHECK_HEADER(X11/Xaw/ThreeD.h,
3593 AC_MSG_WARN("Could not find a non-3d Athena header set."),
3594 AC_CHECK_HEADER(X11/Xaw/XawInit.h,
3595 athena_h_path=X11/Xaw,
3596 AC_MSG_WARN("Could not find a non-3d Athena header set.")))
3598 dnl The three-d Athena headers are so much more slippery.
3599 dnl Curse this `Lets replace standard libraries' thing that they did. :/
3600 AC_CHECK_HEADER(X11/$athena_variant/XawInit.h,
3601 AC_CHECK_HEADER(X11/$athena_variant/ThreeD.h,
3602 athena_h_path=X11/$athena_variant,))
3604 dnl Is the variant specific header directory directly under include?
3605 if test -z "$athena_h_path"; then
3606 AC_CHECK_HEADER($athena_variant/XawInit.h,
3607 AC_CHECK_HEADER($athena_variant/ThreeD.h,
3608 athena_h_path=$athena_variant,))
3611 dnl If we couldn't find the specific variant, try the generic Athena 3d headers
3612 if test -z "$athena_h_path" -a "$athena_variant" != "Xaw3d"; then
3613 AC_CHECK_HEADER(X11/Xaw3d/XawInit.h,
3614 AC_CHECK_HEADER(X11/Xaw3d/ThreeD.h,
3616 AC_MSG_WARN("Assuming that X11/Xaw3d headers are suitable for $athena_variant.")
3617 athena_h_path=X11/Xaw3d
3621 dnl Also generic 3d headers directly under include dir
3622 if test -z "$athena_h_path" -a "$athena_variant" != "Xaw3d"; then
3623 AC_CHECK_HEADER(Xaw3d/XawInit.h,
3624 AC_CHECK_HEADER(Xaw3d/ThreeD.h,
3626 AC_MSG_WARN("Assuming that Xaw3d headers are suitable for $athena_variant.")
3631 dnl If nothing yet found, see if Xaw is a 3d header set...
3632 dnl We AC_MSG_WARN if we fail because I am all out of ideas...
3633 if test -z "$athena_h_path"; then
3634 AC_CHECK_HEADER(X11/Xaw/ThreeD.h,
3636 AC_MSG_WARN("Assuming that X11/Xaw headers are suitable for $athena_variant.")
3637 athena_h_path=X11/Xaw
3639 AC_MSG_WARN("Could not find a suitable 3d Athena header set."))
3643 dnl Do we actually have a usable Athena widget set? Please?
3644 if test -n "$athena_lib" -a -n "$athena_h_path"; then
3652 fi dnl "$with_x11" = "yes"
3654 if test "$with_x11" = "yes"; then
3655 dnl autodetect Motif - but only add to libs_x later (if necessary)
3656 AC_CHECK_HEADER(Xm/Xm.h,
3657 [AC_CHECK_LIB(Xm, XmStringFree, have_motif=yes, have_motif=no)],
3660 if test "$have_motif" = "yes"; then
3661 dnl autodetect lesstif
3662 AC_MSG_CHECKING(for Lesstif)
3665 #ifdef LESSTIF_VERSION
3668 ], have_lesstif=yes, have_lesstif=no)
3669 AC_MSG_RESULT($have_lesstif)
3672 fi dnl "$with_x11" = "yes"
3674 dnl Finish ensuring that we have values for the various toolkit items.
3675 dnl Not all toolkits support all widgets
3677 dnl Avoid using Motif :-(
3679 *linux* | cygwin* ) lucid_prefers_motif="no" ;;
3680 * ) lucid_prefers_motif="yes" ;;
3683 case "$with_menubars" in "" | "yes" | "athena" )
3684 with_menubars="lucid" ;;
3686 case "$with_dialogs" in "" | "yes" | "lucid" )
3687 if test "$lucid_prefers_motif" = "yes"; then
3688 if test "$have_motif" = "yes"; then with_dialogs="motif"
3689 elif test "$have_xaw" = "yes"; then with_dialogs="athena"
3690 else with_dialogs=no
3693 if test "$have_xaw" = "yes"; then with_dialogs="athena"
3694 elif test "$have_motif" = "yes"; then with_dialogs="motif"
3695 else with_dialogs=no
3699 case "$with_scrollbars" in "" | "yes" )
3700 with_scrollbars="lucid" ;;
3702 case "$with_widgets" in
3704 if test "$lucid_prefers_motif" = "yes"; then
3705 if test "$have_motif" = "yes"; then with_widgets="motif"
3706 elif test "$have_xaw" = "yes"; then with_widgets="athena"
3707 else with_widgets=no
3710 if test "$have_xaw" = "yes"; then with_widgets="athena"
3711 elif test "$have_motif" = "yes"; then with_widgets="motif"
3712 else with_widgets=no
3719 all_widgets="$with_menubars $with_scrollbars $with_dialogs $with_toolbars $with_widgets"
3721 case "$all_widgets" in
3723 if test "$have_xaw" != "yes"; then
3724 XE_DIE("Could not find a suitable Athena library to build with.")
3727 dnl Add the Lucid widget Athena code
3728 XE_APPEND(lwlib-Xaw.o, lwlib_objs)
3730 dnl Add the Athena widget library we located earlier
3731 XE_PREPEND(-l$athena_lib, libs_x)
3733 dnl Tell lwlib where to find the Athena header files.
3734 dnl Many people have tried to create a `smart' way of doing this,
3735 dnl but all have failed. Before changing the following ugly definitions,
3736 dnl consult the veterans of many a battle.
3737 AC_DEFINE_UNQUOTED(ATHENA_Scrollbar_h_,"$athena_h_path/Scrollbar.h")
3738 AC_DEFINE_UNQUOTED(ATHENA_Dialog_h_,"$athena_h_path/Dialog.h")
3739 AC_DEFINE_UNQUOTED(ATHENA_Form_h_,"$athena_h_path/Form.h")
3740 AC_DEFINE_UNQUOTED(ATHENA_Command_h_,"$athena_h_path/Command.h")
3741 AC_DEFINE_UNQUOTED(ATHENA_Label_h_,"$athena_h_path/Label.h")
3742 AC_DEFINE_UNQUOTED(ATHENA_LabelP_h_,"$athena_h_path/LabelP.h")
3743 AC_DEFINE_UNQUOTED(ATHENA_Toggle_h_,"$athena_h_path/Toggle.h")
3744 AC_DEFINE_UNQUOTED(ATHENA_ToggleP_h_,"$athena_h_path/ToggleP.h")
3745 AC_DEFINE_UNQUOTED(ATHENA_AsciiText_h_,"$athena_h_path/AsciiText.h")
3746 AC_DEFINE_UNQUOTED(ATHENA_XawInit_h_,"$athena_h_path/XawInit.h")
3748 AC_DEFINE(LWLIB_USES_ATHENA)
3749 AC_DEFINE(NEED_ATHENA)
3752 if test "$athena_3d" = "yes"; then
3753 AC_DEFINE(HAVE_ATHENA_3D)
3758 case "$all_widgets" in *motif* )
3759 AC_DEFINE(LWLIB_USES_MOTIF)
3760 AC_DEFINE(NEED_MOTIF)
3761 XE_APPEND(lwlib-Xm.o, lwlib_objs)
3765 test "$with_menubars" = "lucid" && XE_APPEND(xlwmenu.o, lwlib_objs)
3766 test "$with_menubars" = "motif" && XE_APPEND(xlwmenu.o, lwlib_objs)
3767 test "$with_scrollbars" = "lucid" && XE_APPEND(xlwscrollbar.o, lwlib_objs)
3768 test "$with_widgets" != "no" && test "$with_widgets" != "msw" && \
3769 XE_APPEND(xlwtabs.o xlwgcs.o, lwlib_objs)
3770 case "$with_widgets" in athena* )
3771 XE_APPEND(xlwradio.o xlwcheckbox.o xlwgauge.o, lwlib_objs);;
3773 case "$all_widgets" in *lucid* )
3774 AC_DEFINE(NEED_LUCID)
3775 XE_APPEND(lwlib-Xlw.o, lwlib_objs) ;;
3778 AC_SUBST(lwlib_objs)
3780 test "$with_scrollbars" = "athena" && AC_DEFINE(LWLIB_SCROLLBARS_ATHENA)
3781 test "$with_dialogs" = "athena" && AC_DEFINE(LWLIB_DIALOGS_ATHENA)
3783 if test "$athena_3d" = "yes"; then
3784 test "$with_scrollbars" = "athena" && AC_DEFINE(LWLIB_SCROLLBARS_ATHENA3D)
3785 test "$with_dialogs" = "athena" && AC_DEFINE(LWLIB_DIALOGS_ATHENA3D)
3788 case "$with_widgets" in athena* ) AC_DEFINE(LWLIB_WIDGETS_ATHENA);; esac
3789 test "$with_widgets" != "no" && test "$with_widgets" != "msw" && \
3790 AC_DEFINE(LWLIB_TABS_LUCID)
3792 test "$with_menubars" != "no" && AC_DEFINE(HAVE_MENUBARS)
3793 test "$with_scrollbars" != "no" && AC_DEFINE(HAVE_SCROLLBARS)
3794 test "$with_dialogs" != "no" && AC_DEFINE(HAVE_DIALOGS)
3795 test "$with_toolbars" != "no" && AC_DEFINE(HAVE_TOOLBARS)
3796 test "$with_widgets" != "no" && AC_DEFINE(HAVE_WIDGETS)
3798 test "$with_menubars" = "lucid" && AC_DEFINE(LWLIB_MENUBARS_LUCID)
3799 test "$with_scrollbars" = "lucid" && AC_DEFINE(LWLIB_SCROLLBARS_LUCID)
3801 test "$with_menubars" = "motif" && AC_DEFINE(LWLIB_MENUBARS_MOTIF)
3802 test "$with_scrollbars" = "motif" && AC_DEFINE(LWLIB_SCROLLBARS_MOTIF)
3803 test "$with_dialogs" = "motif" && AC_DEFINE(LWLIB_DIALOGS_MOTIF)
3804 test "$with_widgets" = "motif" && AC_DEFINE(LWLIB_WIDGETS_MOTIF)
3806 test "$with_menubars" != "no" && XE_ADD_OBJS(menubar.o)
3807 test "$with_scrollbars" != "no" && XE_ADD_OBJS(scrollbar.o)
3808 test "$with_dialogs" != "no" && XE_ADD_OBJS(dialog.o)
3809 test "$with_toolbars" != "no" && XE_ADD_OBJS(toolbar.o)
3811 if test "$with_gtk" = "yes"; then
3812 test "$with_menubars" != "no" && XE_ADD_OBJS(menubar-gtk.o)
3813 test "$with_scrollbars" != "no" && XE_ADD_OBJS(scrollbar-gtk.o)
3814 test "$with_dialogs" != "no" && XE_ADD_OBJS(dialog-gtk.o)
3815 test "$with_toolbars" != "no" && XE_ADD_OBJS(toolbar-gtk.o)
3816 test "$all_widgets" != "no no no no no" && XE_ADD_OBJS(gui-gtk.o)
3819 if test "$with_x11" = "yes"; then
3820 test "$with_menubars" != "no" && XE_ADD_OBJS(menubar-x.o)
3821 test "$with_scrollbars" != "no" && XE_ADD_OBJS(scrollbar-x.o)
3822 test "$with_dialogs" != "no" && XE_ADD_OBJS(dialog-x.o)
3823 test "$with_toolbars" != "no" && XE_ADD_OBJS(toolbar-x.o)
3824 test "$all_widgets" != "no no no no no" && XE_ADD_OBJS(gui-x.o)
3827 dnl ----------------------
3828 dnl Mule-dependent options
3829 dnl ----------------------
3831 test -z "$with_mule" && with_mule=no
3832 test -z "$with_file_coding" && with_file_coding=no
3834 dnl if test "$with_mule" = "yes" && test ! -d "$srcdir/lisp/mule"; then
3835 dnl echo "Attempt to Build with Mule without Mule/Lisp"
3836 dnl echo "Please install the XEmacs/Mule tarball or"
3837 dnl echo "rerun configure with --with-mule=no"
3841 if test "$with_file_coding" = "yes" && test "$with_mule" = "no"; then
3842 AC_DEFINE(FILE_CODING)
3843 XE_ADD_OBJS(file-coding.o)
3846 dnl Autodetect concord
3847 concord_includes_found=no
3848 if test "$with_concord" != "no"; then
3849 AC_CHECK_HEADER(concord.h, ,with_concord=no)
3851 if test "$concord_includes_found" = "no" -a "$with_concord" != "no" -a \
3852 -d "/usr/local/concord/include"; then
3853 save_c_switch_site="$c_switch_site"
3854 c_switch_site="$c_switch_site -I/usr/local/concord/include"
3855 AC_CHECK_HEADER(concord.h,concord_includes_found=yes)
3856 if test "$concord_includes_found" != "yes"; then
3857 c_switch_site="$save_c_switch_site"
3862 test -z "$with_concord" && with_concord=yes
3863 if test "$with_concord" = "yes"; then
3864 AC_DEFINE(HAVE_CONCORD)
3865 XE_PREPEND(-lconcord, libs_x)
3866 XE_ADD_OBJS(concord.o)
3869 test -z "$with_chise" && with_chise=yes
3870 if test "$with_chise" = "yes"; then
3873 with_text_coding=yes
3876 if test "$with_mule" = "yes" ; then
3877 AC_CHECKING(for Mule-related features)
3880 dnl Autodetect chise
3881 chise_includes_found=no
3882 if test "$with_chise" != "no"; then
3883 AC_CHECK_HEADER(chise.h, ,with_chise=no)
3885 if test "$chise_includes_found" = "no" -a "$with_chise" != "no" -a \
3886 -d "/usr/local/chise/include"; then
3887 save_c_switch_site="$c_switch_site"
3888 c_switch_site="$c_switch_site -I/usr/local/chise/include"
3889 AC_CHECK_HEADER(chise.h,chise_includes_found=yes)
3890 if test "$chise_includes_found" != "yes"; then
3891 c_switch_site="$save_c_switch_site"
3896 test -z "$with_chise" && with_chise=yes
3897 if test "$with_chise" = "yes"; then
3898 AC_DEFINE(HAVE_CHISE)
3899 AC_DEFINE(HAVE_LIBCHISE)
3900 XE_PREPEND(-lchise, libs_x)
3903 AC_DEFINE(FILE_CODING)
3904 XE_ADD_OBJS(mule.o mule-ccl.o mule-charset.o)
3905 if test "$with_utf_2000" = "yes" && test "$with_text_coding" = "yes"; then
3906 AC_DEFINE(TEXT_CODING)
3907 XE_ADD_OBJS(text-coding.o)
3909 XE_ADD_OBJS(file-coding.o)
3911 dnl Use -lintl to get internationalized strerror for Mule
3912 AC_CHECK_HEADERS(libintl.h)
3913 AC_CHECK_LIB(intl, strerror)
3915 if test "$with_utf_2000" = "yes" ; then
3916 AC_DEFINE(CHAR_IS_UCS4)
3922 AC_CHECKING(for Mule input methods)
3923 dnl Do we have the XmIm* routines? And if so, do we want to use them?
3924 dnl XIM seems to be flaky except on Solaris...
3925 dnl test -z "$with_xim" -a "$opsys" != "sol2" && with_xim=no
3926 case "$with_xim" in "" | "yes" )
3927 AC_CHECKING(for XIM)
3928 AC_CHECK_LIB(X11, XOpenIM, with_xim=xlib, with_xim=no)
3929 dnl XIM + Lesstif is not (yet?) usable
3930 dnl Only use Motif if linking Motif anyway, or don't have xlib XIM
3931 if test "$need_motif $have_lesstif" = "yes no"; then
3932 AC_CHECK_LIB(Xm, XmImMbLookupString, with_xim=motif)
3933 elif test "$have_motif $have_lesstif $with_xim" = "yes no no"; then
3934 AC_CHECK_LIB(Xm, XmImMbLookupString, with_xim=motif)
3937 if test "$with_xim" != "no"; then
3939 if test "$with_xim" = "xlib"; then
3941 XE_ADD_OBJS(input-method-xlib.o)
3943 if test "$with_xim" = "motif"; then
3944 AC_DEFINE(XIM_MOTIF)
3946 XE_ADD_OBJS(input-method-motif.o)
3948 if test "$with_xim" = "motif"; then
3953 dnl "with_xfs" = "yes"
3954 if test "$with_xfs" = "yes" ; then
3955 AC_CHECKING(for XFontSet)
3956 AC_CHECK_LIB(X11, XmbDrawString, [:], with_xfs=no)
3957 if test "$with_xfs" = "yes" && test "$with_menubars" = "lucid"; then
3958 AC_DEFINE(USE_XFONTSET)
3959 if test "$with_xim" = "no" ; then
3960 XE_ADD_OBJS(input-method-xlib.o)
3966 test "$with_wnn6" = "yes" && with_wnn=yes # wnn6 implies wnn support
3967 test -z "$with_wnn" && { AC_CHECK_HEADER(wnn/jllib.h, ,with_wnn=no) }
3968 dnl gcc 2.97 fixincludes breaks inclusion of wnn/commonhd.h
3969 test -z "$with_wnn" && { AC_CHECK_HEADER(wnn/commonhd.h, ,with_wnn=no) }
3970 dnl Detour to find crypt
3971 if test "$with_wnn" != "no"; then
3972 AC_CHECK_FUNCS(crypt)
3973 test "$ac_cv_func_crypt" != "yes" && { AC_CHECK_LIB(crypt, crypt) }
3975 dnl Back to our regularly scheduled wnn hunting
3976 if test -z "$with_wnn" -o "$with_wnn" = "yes"; then
3977 AC_CHECK_LIB(wnn,jl_dic_list_e,libwnn=wnn,
3978 AC_CHECK_LIB(wnn4,jl_dic_list_e,libwnn=wnn4,
3979 AC_CHECK_LIB(wnn6,jl_dic_list_e,libwnn=wnn6,
3980 AC_CHECK_LIB(wnn6_fromsrc,dic_list_e,libwnn=wnn6_fromsrc,with_wnn=no))))
3982 test -z "$with_wnn" && with_wnn=yes
3983 if test "$with_wnn" = "yes"; then
3985 XE_PREPEND(-l$libwnn, libs_x)
3986 XE_ADD_OBJS(mule-wnnfns.o)
3987 if test "$with_wnn6" != "no"; then
3988 AC_CHECK_LIB($libwnn, jl_fi_dic_list, with_wnn6=yes)
3989 test "$with_wnn6" = "yes" && AC_DEFINE(WNN6)
3993 dnl Autodetect canna
3994 canna_includes_found=no
3995 if test "$with_canna" != "no"; then
3996 AC_CHECK_HEADER(canna/jrkanji.h,canna_includes_found=yes)
3998 if test "$canna_includes_found" = "no" -a "$with_canna" != "no" -a \
3999 -d "/usr/local/canna/include"; then
4000 save_c_switch_site="$c_switch_site"
4001 c_switch_site="$c_switch_site -I/usr/local/canna/include"
4002 AC_CHECK_HEADER(canna/jrkanji.h,canna_includes_found=yes)
4003 if test "$canna_includes_found" != "yes"; then
4004 c_switch_site="$save_c_switch_site"
4009 test -z "$with_canna" && { AC_CHECK_HEADER(canna/RK.h, , with_canna=no) }
4010 test -z "$with_canna" && { AC_CHECK_LIB(RKC, RkBgnBun, [:],with_canna=no) }
4011 test -z "$with_canna" && { AC_CHECK_LIB(canna,jrKanjiControl,[:],with_canna=no) }
4012 test -z "$with_canna" && with_canna=yes
4013 if test "$with_canna" = "yes"; then
4014 AC_DEFINE(HAVE_CANNA)
4015 XE_PREPEND(-lcanna -lRKC, libs_x)
4016 XE_ADD_OBJS(mule-canna.o)
4019 else dnl "$with_mule" = "no"
4020 for feature in xim canna wnn; do
4021 if eval "test -n \"\$with_${feature}\" -a \"\$with_${feature}\" != no" ; then
4022 AC_MSG_WARN("--with-${feature} ignored: Not valid without Mule support")
4024 eval "with_${feature}=no"
4029 dnl At this point, we know whether we need the motif lib or not.
4030 if test "$need_motif" = "yes" ; then
4031 XE_PREPEND(-lXm, libs_x)
4032 dnl AIX needs the following library for use with Motif
4033 AC_CHECK_LIB(i18n, layout_object_getvalue, [XE_PREPEND(-li18n, libs_x)])
4034 XE_COMPUTE_RUNPATH()
4037 dnl ----------------------------------------------------------------
4038 dnl Check for POSIX functions.
4039 dnl ----------------------------------------------------------------
4041 AC_CHECK_FUNCS(cbrt closedir dup2 eaccess fmod fpathconf frexp ftime getaddrinfo gethostname getnameinfo getpagesize gettimeofday getcwd getwd logb lrand48 matherr mkdir mktime perror poll random rename res_init rint rmdir select setitimer setpgid setlocale setsid sigblock sighold sigprocmask snprintf stpcpy strerror tzset ulimit usleep waitpid vsnprintf fsync ftruncate umask)
4043 dnl getaddrinfo() is borked under hpux11
4044 if test "$ac_cv_func_getaddrinfo" != "no" ; then
4047 AC_MSG_WARN([Use of getaddrinfo is disabled for HP-UX 11.XX.])
4048 ac_cv_func_getaddrinfo=no
4053 dnl ----------------------------------------------------------------
4054 dnl Check for PTY support functions.
4055 dnl ----------------------------------------------------------------
4057 dnl There is no "standard" pty allocation method. Every system is different.
4058 dnl getpt() is the preferred pty allocation method on glibc systems.
4059 dnl _getpty() is the preferred pty allocation method on SGI systems.
4060 dnl grantpt(), unlockpt(), ptsname() are defined by Unix98.
4061 AC_CHECK_FUNCS(getpt _getpty grantpt unlockpt ptsname killpg tcgetpgrp)
4063 dnl openpty() is the preferred pty allocation method on BSD and Tru64 systems.
4064 dnl openpty() might be declared in:
4065 dnl - pty.h (Tru64 or Linux)
4066 dnl - libutil.h (FreeBSD)
4067 dnl - util.h (NetBSD)
4068 AC_CHECK_FUNC(openpty, have_openpty=yes, [
4069 AC_CHECK_LIB(util, openpty, have_openpty=yes need_libutil=yes)])
4070 if test "$have_openpty" = "yes"; then
4071 AC_DEFINE(HAVE_OPENPTY)
4072 AC_CHECK_HEADERS(pty.h libutil.h util.h, break)
4073 test "$need_libutil" = "yes" && XE_APPEND(-lutil, libs_system)
4076 dnl Check for STREAM support functions.
4077 dnl Confusingly, "str" means both "string" and "SysV Streams".
4078 AC_CHECK_HEADERS(stropts.h)
4079 if test "$ac_cv_header_stropts_h" = "yes"; then
4080 AC_CHECK_FUNCS(isastream)
4081 AC_CHECK_HEADERS(strtio.h) dnl TIOCSIGNAL
4084 dnl Use our own realpath always.
4085 XE_ADD_OBJS(realpath.o)
4087 dnl Check whether the system provides getloadavg().
4088 AC_CHECK_FUNCS(getloadavg)
4090 if test "$ac_cv_func_getloadavg" = "yes"; then
4091 dnl Solaris 8 declares getloadavg() in <sys/loadavg.h>.
4092 dnl glibc 2.2 declares getloadavg() in <stdlib.h>...
4093 dnl ...if we #define _GNU_SOURCE, which we do.
4094 AC_CHECK_HEADERS(sys/loadavg.h)
4096 dnl We define our own getloadavg() using lower level functions.
4097 XE_ADD_OBJS(getloadavg.o)
4099 dnl Used by getloadavg() - does not require root priveleges
4100 AC_CHECK_LIB(kstat, kstat_open)
4101 AC_CHECK_HEADERS(kstat.h)
4103 dnl Another way to get the load average
4104 AC_CHECK_LIB(kvm, kvm_read)
4107 dnl If netdb.h does not declare h_errno, we must declare it by hand.
4108 AC_MSG_CHECKING(whether netdb declares h_errno)
4109 AC_TRY_LINK([#include <netdb.h>],
4112 AC_DEFINE(HAVE_H_ERRNO)],
4113 [AC_MSG_RESULT(no)])
4115 AC_MSG_CHECKING(for sigsetjmp)
4116 AC_TRY_COMPILE([#include <setjmp.h>],
4117 [sigjmp_buf bar; sigsetjmp (bar, 0);],
4119 AC_DEFINE(HAVE_SIGSETJMP)],
4120 [AC_MSG_RESULT(no)])
4122 AC_MSG_CHECKING(whether localtime caches TZ)
4123 AC_CACHE_VAL(emacs_cv_localtime_cache,
4124 [if test "$ac_cv_func_tzset" = "yes"; then
4125 AC_TRY_RUN([#include <time.h>
4127 # include <stdlib.h>
4129 extern char **environ;
4133 for (to = from = environ; (*to = *from); from++)
4134 if (! (to[0][0] == 'T' && to[0][1] == 'Z' && to[0][2] == '='))
4137 char TZ_GMT0[] = "TZ=GMT0";
4138 char TZ_PST8[] = "TZ=PST8";
4141 time_t now = time ((time_t *) 0);
4142 int hour_GMT0, hour_unset;
4143 if (putenv (TZ_GMT0) != 0)
4145 hour_GMT0 = localtime (&now)->tm_hour;
4147 hour_unset = localtime (&now)->tm_hour;
4148 if (putenv (TZ_PST8) != 0)
4150 if (localtime (&now)->tm_hour == hour_GMT0)
4153 if (localtime (&now)->tm_hour != hour_unset)
4156 }], emacs_cv_localtime_cache=no, emacs_cv_localtime_cache=yes,
4157 [# If we have tzset, assume the worst when cross-compiling.
4158 emacs_cv_localtime_cache=yes])
4160 # If we lack tzset, report that localtime does not cache TZ,
4161 # since we can't invalidate the cache if we don't have tzset.
4162 emacs_cv_localtime_cache=no
4164 AC_MSG_RESULT($emacs_cv_localtime_cache)
4165 if test $emacs_cv_localtime_cache = yes; then
4166 AC_DEFINE(LOCALTIME_CACHE)
4169 if test "$HAVE_TIMEVAL" = "yes"; then
4170 AC_MSG_CHECKING(whether gettimeofday accepts one or two arguments)
4172 #ifdef TIME_WITH_SYS_TIME
4173 #include <sys/time.h>
4176 #ifdef HAVE_SYS_TIME_H
4177 #include <sys/time.h>
4184 struct timeval time;
4185 gettimeofday (&time, 0);
4187 [AC_MSG_RESULT(two)],
4189 AC_DEFINE(GETTIMEOFDAY_ONE_ARGUMENT)])
4194 test "$ac_cv_c_inline" != "no" -a "$GCC" = "yes" && XE_ADD_OBJS(inline.o)
4196 dnl HP-UX has a working alloca in libPW.
4197 dnl case "${GCC}${opsys}" in hpux* )
4198 dnl AC_CHECK_FUNC(alloca, [:], [AC_CHECK_LIB(PW, alloca)])
4201 dnl AC_FUNC_ALLOCA doesn't know about DEC C's #pragma intrinsic(alloca)
4202 if test "$__DECC" != "yes"; then
4204 test -n "$ALLOCA" && XE_ADD_OBJS($ALLOCA)
4207 dnl Check whether vfork exists and works correctly. (This does more
4208 dnl than just check for its existence.) If so, it defines HAVE_VFORK_H.
4209 dnl If not, it defines vfork to be fork.
4212 dnl Check whether strcoll exists and works correctly. (This does more
4213 dnl than just check for its existence.) If so, it defines HAVE_STRCOLL.
4216 dnl If `getpgrp' takes no argument (the POSIX.1 version), define
4217 dnl `GETPGRP_VOID'. Otherwise, it is the BSD version, which takes a
4218 dnl process ID as an argument.
4219 AC_CHECK_FUNCS(getpgrp)
4222 dnl We used to call AC_FUNC_MMAP here
4223 dnl Instead we now use following, suggested by Neal Becker
4224 AC_MSG_CHECKING(for working mmap)
4225 case "$opsys" in ultrix* ) have_mmap=no ;; *)
4226 AC_TRY_RUN([#include <stdio.h>
4229 #include <sys/mman.h>
4231 #ifndef MAP_VARIABLE
4232 #define MAP_VARIABLE 0
4236 #define MAP_FAILED -1
4239 int main (int argc, char *argv[])
4243 #ifndef MAP_ANONYMOUS
4244 fd = open ("/dev/zero", O_RDWR);
4247 #define MAP_ANONYMOUS 0
4249 if (mmap(0, 1024, PROT_READ | PROT_WRITE,
4250 MAP_PRIVATE | MAP_VARIABLE | MAP_ANONYMOUS,
4251 fd, 0) != (void *) MAP_FAILED)
4253 perror ("conftest: mmap failed");
4255 }], have_mmap=yes, have_mmap=no) ;;
4257 AC_MSG_RESULT($have_mmap)
4258 test "$have_mmap" = "yes" && AC_DEFINE(HAVE_MMAP)
4260 dnl By default we switch off rel-alloc on cygwin as it generally causes us grief
4261 case "$opsys" in cygwin*)
4262 test "$rel_alloc" = "default" && rel_alloc=no ;;
4264 dnl rel_alloc requires either GNU malloc or system malloc with mmap
4265 dnl We only turn rel_alloc on by default if mmap is available.
4266 test "$GNU_MALLOC" != "yes" -a "$have_mmap" != "yes" && rel_alloc=no
4267 if test "$rel_alloc $have_mmap" = "default yes"; then
4268 if test "$doug_lea_malloc" = "yes"; then
4269 dnl Check if malloc() calls mmap(), making rel_alloc pointless.
4270 AC_MSG_CHECKING(for M_MMAP_THRESHOLD)
4271 AC_TRY_COMPILE([#include <malloc.h>],[
4272 #ifndef M_MMAP_THRESHOLD
4273 #error No M_MMAP_THRESHOLD :-(
4274 !@+$%^&*_)(_ - unlikely to compile...
4276 ], [rel_alloc=no; AC_MSG_RESULT(yes);], [rel_alloc=yes; AC_MSG_RESULT(no);])
4281 test "$rel_alloc" = "yes" && AC_DEFINE(REL_ALLOC)
4283 dnl Check for terminal I/O variants
4284 dnl TERMIOS systems may have termio.h, but not vice-versa, I think.
4285 AC_CHECK_HEADER(termios.h,
4286 AC_DEFINE(HAVE_TERMIOS)
4287 AC_DEFINE(SIGNALS_VIA_CHARACTERS)
4288 AC_DEFINE(NO_TERMIO),
4289 [AC_CHECK_HEADER(termio.h, [AC_DEFINE(HAVE_TERMIO)])])
4292 dnl Check for Internet sockets.
4293 AC_CHECK_FUNC(socket,
4294 [AC_CHECK_HEADER(netinet/in.h,
4295 [AC_CHECK_HEADER(arpa/inet.h, [
4296 AC_DEFINE(HAVE_SOCKETS)
4297 AC_MSG_CHECKING("for sun_len member in struct sockaddr_un")
4299 #include <sys/types.h>
4300 #include <sys/socket.h>
4303 [static struct sockaddr_un x; x.sun_len = 1;],
4304 [AC_MSG_RESULT(yes); AC_DEFINE(HAVE_SOCKADDR_SUN_LEN)],
4305 [AC_MSG_RESULT(no)])
4306 AC_MSG_CHECKING("for ip_mreq struct in netinet/in.h")
4308 #include <sys/types.h>
4309 #include <netinet/in.h>
4311 [static struct ip_mreq x;],
4312 [AC_MSG_RESULT(yes); AC_DEFINE(HAVE_MULTICAST)],
4313 [AC_MSG_RESULT(no)])])])])
4315 dnl Check for SYS V IPC. (Inferior to sockets.)
4316 AC_CHECK_FUNC(msgget,
4317 [AC_CHECK_HEADER(sys/ipc.h,
4318 [AC_CHECK_HEADER(sys/msg.h,
4319 [AC_DEFINE(HAVE_SYSVIPC)])])])
4321 dnl Check for directory variants
4322 AC_CHECK_HEADER(dirent.h, [AC_DEFINE(SYSV_SYSTEM_DIR)],
4323 [AC_CHECK_HEADER(sys/dir.h, , [AC_DEFINE(NONSYSTEM_DIR_LIBRARY)])])
4325 dnl Check for nlist.h
4326 AC_CHECK_HEADER(nlist.h, AC_DEFINE(NLIST_STRUCT), )
4328 dnl Check for sound of various sorts.
4330 dnl Autodetect native sound
4331 AC_CHECKING("for sound support")
4332 test -z "$with_native_sound" -a -n "$native_sound_lib" && with_native_sound=yes
4334 if test "$with_native_sound" != "no"; then
4335 dnl Maybe sound is already on include path...
4336 if test -n "$native_sound_lib"; then
4337 AC_CHECK_HEADER(multimedia/audio_device.h,
4338 [sound_found=yes sound_cflags=""
4339 XE_ADD_OBJS(sunplay.o)])
4342 dnl Autodetect Sun native sound from SUNWaudmo package
4343 if test -z "$sound_found" -a -d "/usr/demo/SOUND"; then
4344 if test -d "/usr/demo/SOUND/include/multimedia"; then
4345 sun_sound_cflags="-I/usr/demo/SOUND/include"
4346 elif test -d "/usr/demo/SOUND/multimedia"; then
4347 sun_sound_cflags="-I/usr/demo/SOUND"
4350 if test -n "$native_sound_lib"; then
4351 sun_sound_lib="$native_sound_lib"
4352 elif test -r "/usr/demo/SOUND/lib/libaudio.a"; then
4353 sun_sound_lib="/usr/demo/SOUND/lib/libaudio.a"
4354 elif test -r "/usr/demo/SOUND/libaudio.a"; then
4355 sun_sound_lib="/usr/demo/SOUND/libaudio.a"
4358 if test -n "$sun_sound_cflags" -a -n "$sun_sound_lib"; then
4359 native_sound_lib="$sun_sound_lib"
4360 sound_cflags="$sun_sound_cflags"
4362 XE_ADD_OBJS(sunplay.o)
4366 dnl Check for SGI and HP native sound libs
4367 if test -z "$sound_found"; then
4368 case "$canonical" in
4370 if test -z "$native_sound_lib"; then
4371 AC_CHECK_LIB(audio, ALopenport, native_sound_lib="-laudio")
4373 if test -n "$native_sound_lib"; then
4374 sound_found=yes sound_cflags=""
4375 XE_ADD_OBJS(sgiplay.o)
4378 if test -z "$native_sound_lib"; then
4379 AC_CHECK_LIB(Alib, AOpenAudio, native_sound_lib="-lAlib")
4381 if test -n "$native_sound_lib"; then
4383 XE_ADD_OBJS(hpplay.o)
4384 if test "$GCC" = "yes" # Kludge city
4385 then sound_cflags="-Dconst= -Dvolatile= -I/usr/audio/examples"
4386 else sound_cflags="+e -I/usr/audio/examples"
4392 dnl Win32 Native uses native sound
4393 if test -z "$sound_found"; then
4394 if test "$with_msw" = "yes"; then
4400 dnl Check for Linux/BSD native sound
4401 if test -z "$sound_found"; then
4402 for dir in "machine" "sys" "linux"; do
4403 AC_CHECK_HEADER(${dir}/soundcard.h,
4406 XE_ADD_OBJS(linuxplay.o)
4407 [AC_DEFINE_UNQUOTED(SOUNDCARD_H_FILE, "${dir}/soundcard.h")]
4412 test "$sound_found" = "yes" && with_native_sound=yes
4415 if test "$with_native_sound" = "yes"; then
4416 AC_DEFINE(HAVE_NATIVE_SOUND)
4417 test -n "$native_sound_lib" && XE_PREPEND($native_sound_lib, LIBS)
4420 dnl NAS Sound support
4421 if test "$with_nas_sound" != "no"; then
4422 AC_CHECK_HEADER(audio/audiolib.h, [
4423 AC_CHECK_LIB(audio, AuOpenServer, have_nas_sound=yes)])
4424 if test "$have_nas_sound" = "yes"; then
4426 AC_DEFINE(HAVE_NAS_SOUND)
4428 XE_PREPEND(-laudio, libs_x)
4429 dnl If the nas library does not contain the error jump point,
4430 dnl then we force safer behavior.
4431 AC_EGREP_HEADER(AuXtErrorJump,audio/Xtutil.h,,[old_nas=yes; AC_DEFINE(NAS_NO_ERROR_JUMP)])
4433 test "$with_nas_sound" = "yes" && \
4434 XE_DIE("Required NAS sound support cannot be provided.")
4439 dnl ESD Sound support
4440 if test "$with_esd_sound" != "no"; then
4441 AC_CHECK_PROG(have_esd_config, esd-config, yes, no)
4442 if test "$have_esd_config" = "yes"; then
4443 save_c_switch_site="$c_switch_site" save_LIBS="$LIBS"
4444 XE_APPEND(`esd-config --cflags`, c_switch_site)
4445 XE_PREPEND(`esd-config --libs`, LIBS)
4446 AC_CHECK_FUNC(esd_play_stream,
4448 c_switch_site="$save_c_switch_site" LIBS="$save_LIBS")
4451 if test "$have_esd_sound" = "yes"; then
4455 AC_DEFINE(HAVE_ESD_SOUND)
4457 test "$with_esd_sound" = "yes" && \
4458 XE_DIE("Required ESD sound support cannot be provided.")
4463 test "$need_miscplay" = "yes" && XE_ADD_OBJS(miscplay.o)
4465 dnl ---------------------
4466 dnl TTY-dependent options
4467 dnl ---------------------
4469 test -z "$with_tty" && with_tty=yes
4471 if test "$with_tty" = "yes" ; then
4472 AC_CHECKING(for TTY-related features)
4474 XE_ADD_OBJS(console-tty.o device-tty.o event-tty.o frame-tty.o objects-tty.o redisplay-tty.o cm.o)
4476 dnl Autodetect ncurses.
4477 if test -z "$with_ncurses"; then
4478 AC_CHECK_LIB(ncurses, tgetent, with_ncurses=yes, with_ncurses=no)
4480 if test "$with_ncurses" = "yes"; then
4481 AC_DEFINE(HAVE_NCURSES)
4482 AC_CHECK_HEADER(ncurses/curses.h, curses_h_file=ncurses/curses.h)
4483 AC_CHECK_HEADER(ncurses/term.h, term_h_file=ncurses/term.h)
4484 XE_ADD_OBJS(terminfo.o)
4485 XE_PREPEND(-lncurses, LIBS)
4487 if test "$ac_cv_header_ncurses_curses_h" != "yes" ; then
4488 dnl Try again, and check for the bogus ncurses/ include bug.
4489 dnl (i.e. ncurses/curses.h bogusly includes <unctrl.h> instead of
4490 dnl <ncurses/unctrl.h>)
4491 save_c_switch_site="$c_switch_site"
4492 c_switch_site="$c_switch_site -I/usr/include/ncurses"
4493 AC_CHECK_HEADER(ncurses/curses.h, curses_h_file=ncurses/curses.h)
4494 if test "$ac_cv_header_ncurses_curses_h" = "yes"
4495 then AC_MSG_WARN("Your system has the bogus ncurses include bug.")
4496 else c_switch_site="$save_c_switch_site"
4499 else dnl "$with_ncurses" = "no"
4500 dnl Autodetect terminfo/-lcurses/-ltermlib/-ltermcap
4501 if test "$have_terminfo" = "yes"; then
4502 XE_ADD_OBJS(terminfo.o)
4503 if test -n "$libs_termcap"; then
4504 XE_PREPEND($libs_termcap, LIBS)
4506 for lib in curses termlib termcap; do
4507 AC_CHECK_LIB($lib, tgetent, XE_PREPEND(-l${lib}, LIBS); break)
4510 else dnl "$have_terminfo" = "no" && "with_ncurses" = "no"
4511 if test -n "$libs_termcap" -a "$opsys" = "openbsd"; then
4512 dnl We need to check if tgoto does not exist in termcap yet
4513 dnl because on OpenBSD libtermcap is another name for libcurses
4514 dnl which provides the same tgoto as ncurses
4515 AC_CHECK_LIB(termcap, tgoto, , XE_ADD_OBJS(tparam.o))
4517 XE_ADD_OBJS(tparam.o)
4519 dnl The HP-UX curses library seems to have a badly broken version of select(2)
4520 dnl that makes "poll: interrupted system call" messages to appear and
4521 dnl Emacs subprocesses to hang (e.g. TeX compilation w/ AUCTeX) */
4522 case "$opsys" in *-hp-hpux* ) libs_termcap="-ltermcap" ;; esac
4523 if test -n "$libs_termcap"; then
4524 XE_PREPEND($libs_termcap, LIBS)
4526 AC_CHECK_LIB(curses, tgetent, XE_PREPEND(-lcurses, LIBS),
4527 AC_CHECK_LIB(termcap, tgetent, XE_PREPEND(-ltermcap, LIBS),
4528 XE_ADD_OBJS(termcap.o)))
4532 AC_DEFINE_UNQUOTED(CURSES_H_FILE, "${curses_h_file-curses.h}")
4533 AC_DEFINE_UNQUOTED(TERM_H_FILE, "${term_h_file-term.h}")
4535 dnl General Purpose Mouse (libgpm) support
4536 if test "$with_gpm" != "no"; then
4537 AC_CHECK_HEADER(gpm.h, [
4538 AC_CHECK_LIB(gpm, Gpm_Open, have_gpm=yes)])
4539 if test "$have_gpm" = "yes"; then
4542 XE_ADD_OBJS(gpmevent.o)
4543 XE_PREPEND(-lgpm, LIBS)
4544 elif test "$with_gpm" = "yes"; then
4545 XE_DIE(["GPM requested, but gpm.h or libgpm seems to be missing."])
4551 else dnl "$with_tty" = "no"
4552 for feature in ncurses gpm; do
4553 if eval "test -n \"\$with_${feature}\" -a \"\$with_${feature}\" != no" ; then
4554 AC_MSG_WARN("--with-${feature} ignored: Not valid without TTY support")
4556 eval "with_${feature}=no"
4560 dnl Do we need event-unixoid.o ?
4561 dnl This is needed for X, or for TTY, or for MSWIN w/Cygwin select()
4562 dnl [but not Mingw MSWIN]
4563 test "$with_x11" = "yes" -o "$with_tty" = "yes" -o "$need_event_unixoid" = "yes" && XE_ADD_OBJS(event-unixoid.o)
4565 dnl Database support
4566 dnl We do not necessarily have to have libdb/lib(g)dbm for DB/(G)DBM support.
4567 dnl On FreeBSD, both DB and DBM are part of libc.
4568 dnl By default, we check for DBM support in libgdbm, then libc, then libdbm.
4570 test "$with_database_gdbm $with_database_dbm $with_database_berkdb" \
4571 != "no no no" && AC_CHECKING(for database support)
4573 dnl Check for ndbm.h, required for either kind of DBM support.
4574 if test "$with_database_gdbm $with_database_dbm" != "no no"; then
4575 AC_CHECK_HEADER(ndbm.h, [:], [
4576 test "$with_database_gdbm" = "yes" -o \
4577 "$with_database_dbm" = "yes" && \
4578 XE_DIE("Required DBM support cannot be provided.")
4579 with_database_gdbm=no with_database_dbm=no])
4582 dnl Check for DBM support in libgdbm.
4583 if test "$with_database_gdbm" != "no"; then
4584 AC_CHECK_LIB(gdbm, dbm_open, [
4585 with_database_gdbm=yes with_database_dbm=no libdbm=-lgdbm], [
4586 if test "$with_database_gdbm" = "yes"; then
4587 XE_DIE("Required GNU DBM support cannot be provided.")
4589 with_database_gdbm=no])
4592 dnl Check for DBM support in libc and libdbm.
4593 if test "$with_database_dbm" != "no"; then
4594 AC_CHECK_FUNC(dbm_open, [with_database_dbm=yes libdbm=], [
4595 AC_CHECK_LIB(dbm, dbm_open, [with_database_dbm=yes libdbm=-ldbm], [
4596 test "$with_database_dbm" = "yes" && \
4597 XE_DIE("Required DBM support cannot be provided.")
4598 with_database_dbm=no])])
4601 dnl Tell make about the DBM support we detected.
4602 test -n "$libdbm" && XE_PREPEND("$libdbm", LIBS)
4603 test "$with_database_gdbm" = "yes" -o \
4604 "$with_database_dbm" = "yes" && \
4607 dnl Check for u_int*_t typedefs.
4608 AC_CHECK_TYPE(u_int8_t, uint8_t)
4609 if test $ac_cv_type_u_int8_t = yes; then
4610 AC_DEFINE(HAVE_U_INT8_T,1)
4612 AC_CHECK_TYPE(u_int16_t, uint16_t)
4613 if test $ac_cv_type_u_int16_t = yes; then
4614 AC_DEFINE(HAVE_U_INT16_T,1)
4616 AC_CHECK_TYPE(u_int32_t, uint32_t)
4617 if test $ac_cv_type_u_int32_t = yes; then
4618 AC_DEFINE(HAVE_U_INT32_T,1)
4620 AC_CHECK_TYPE(u_int64_t, uint64_t)
4621 if test $ac_cv_type_u_int64_t = yes; then
4622 AC_DEFINE(HAVE_U_INT64_T,1)
4625 dnl Check for Berkeley DB.
4626 if test "$with_database_berkdb" != "no"; then
4627 AC_MSG_CHECKING(for Berkeley db.h)
4628 for header in "db/db.h" "db.h"; do
4633 #if !(defined __GLIBC__ && __GLIBC_MINOR__ >= 1)
4634 #ifdef HAVE_INTTYPES_H
4635 #define __BIT_TYPES_DEFINED__
4636 #include <inttypes.h>
4640 ],[], db_h_file="$header"; break)
4645 #if !(defined __GLIBC__ && __GLIBC_MINOR__ >= 1)
4646 #ifdef HAVE_INTTYPES_H
4647 #define __BIT_TYPES_DEFINED__
4648 #include <inttypes.h>
4650 typedef uint8_t u_int8_t;
4653 typedef uint16_t u_int16_t;
4656 typedef uint32_t u_int32_t;
4658 #ifdef WE_DONT_NEED_QUADS
4660 typedef uint64_t u_int64_t;
4666 ],[], db_h_file="$header"; break)
4670 if test -z "$db_h_file"
4671 then AC_MSG_RESULT(no); with_database_berkdb=no
4672 else AC_MSG_RESULT($db_h_file)
4675 if test "$with_database_berkdb" != "no"; then
4676 AC_MSG_CHECKING(for Berkeley DB version)
4678 [#include <$db_h_file>
4679 #if DB_VERSION_MAJOR > 1
4682 ], [AC_EGREP_CPP(yes,
4683 [#include <$db_h_file>
4684 #if DB_VERSION_MAJOR > 2
4687 ], [AC_MSG_RESULT(3); dbfunc=db_create],[
4688 AC_MSG_RESULT(2); dbfunc=db_open])],[
4689 AC_MSG_RESULT(1); dbfunc=dbopen])
4690 AC_CHECK_FUNC($dbfunc, with_database_berkdb=yes need_libdb=no, [
4691 AC_CHECK_LIB(db, $dbfunc, with_database_berkdb=yes need_libdb=yes)])
4694 if test "$with_database_berkdb" = "yes"; then
4695 AC_DEFINE_UNQUOTED(DB_H_FILE, "$db_h_file")
4696 AC_DEFINE(HAVE_BERKELEY_DB)
4697 test "$need_libdb" = "yes" && XE_PREPEND(-ldb, LIBS)
4698 else with_database_berkdb=no
4702 if test "$with_database_gdbm $with_database_dbm $with_database_berkdb" \
4704 AC_DEFINE(HAVE_DATABASE)
4705 XE_ADD_OBJS(database.o)
4706 if test "$with_utf_2000" = "yes" -a "$with_chise" != "yes" ; then
4707 AC_DEFINE(HAVE_CHISE)
4712 if test "$with_socks" = "yes"; then
4713 AC_CHECK_LIB(socks, SOCKSinit)
4714 test -n "$ac_cv_lib_socks_SOCKSinit" && AC_DEFINE(HAVE_SOCKS)
4717 dnl Usage tracking (undocumented and likely unused option)
4718 if test "$usage_tracking" = "yes"; then
4719 AC_DEFINE(USAGE_TRACKING)
4720 XE_PREPEND(-Bstatic -lut -Bdynamic, LIBS)
4723 dnl autodetect dll support
4724 if test "$with_modules" != "no"; then
4725 AC_CHECKING(for module support)
4727 dnl Check for MS-Windows
4728 if test "$with_msw" = "yes"; then
4731 dnl Check for Darwin
4733 darwin) have_dl=yes; AC_DEFINE(HAVE_DYLD) ;;
4734 *) dnl Find headers and libraries
4735 AC_CHECK_HEADER(dlfcn.h, [
4736 AC_MSG_CHECKING([for dlopen in -lc])
4737 AC_TRY_LINK([#include <dlfcn.h>],dnl
4738 [dlopen ("", 0);], [ have_dl=yes ], [
4739 AC_MSG_CHECKING([for dlopen in -ldl])
4740 ac_save_LIBS="$LIBS"
4742 AC_TRY_LINK([#include <dlfcn.h>],dnl
4743 [dlopen ("", 0);], [ have_dl=yes ],
4744 [LIBS="$ac_save_LIBS"])
4746 if test -n "$have_dl"; then
4747 AC_DEFINE(HAVE_DLOPEN)
4749 AC_CHECK_LIB(dld, shl_load, [
4750 libdl=dld have_dl=yes;
4751 AC_DEFINE(HAVE_SHL_LOAD)], [
4752 AC_CHECK_LIB(dld, dld_init, [
4753 libdl=dld have_dl=yes;
4754 AC_DEFINE(HAVE_DLD_INIT)])])
4758 fi dnl end !MS-Windows
4760 if test -n "$have_dl"; then
4761 dnl XE_SHLIB_STUFF (in aclocal.m4) defines $can_build_shared
4765 if test "$can_build_shared" = "yes"; then
4766 AC_DEFINE(HAVE_SHLIB)
4767 XE_ADD_OBJS(sysdll.o emodules.o)
4768 XE_APPEND(src, INSTALL_ARCH_DEP_SUBDIR)
4769 test -n "$libdl" && XE_PREPEND(-l${libdl}, LIBS)
4770 AC_CHECK_FUNCS(dlerror _dlerror)
4773 if test "$with_modules" = "yes"; then
4774 XE_DIE("Required module support cannot be provided.")
4776 AC_MSG_WARN("Module support cannot be provided.")
4782 dnl Unfortunately, just because we can link doesn't mean we can run.
4783 dnl One of the above link tests may have succeeded but caused resulting
4784 dnl executables to fail to run. Also any tests using AC_TRY_RUN will
4785 dnl have reported incorrect results.
4786 AC_TRY_RUN([int main(int c,char *v[]){return 0;}],[:],[
4788 echo "*** PANIC *** configure forgot how to build working executables!"
4790 echo "*** This is most commonly due to an unforeseen environment, causing"
4791 echo "*** configure to incorrectly compute the sequence of libraries to link."
4792 echo "*** Please examine the tail of config.log for runtime errors."
4793 echo "*** Pay special attention to the -l flags, and perhaps -I and -L."
4794 echo "*** Often adding or removing explicit options in the configure"
4795 echo "*** invocation can work around this kind of problem. If so, please"
4796 echo "*** report it as a bug to xemacs-beta@xemacs.org."
4798 echo "*** Other possible causes are inability to write to the file system"
4799 echo "*** (bogus permissions or disk full) or a misconfiguration of the dynamic"
4800 echo "*** linker. On Linux, check /etc/ld.conf and rerun ldconfig if"
4801 echo "*** necessary. On other systems, try telling configure where to find"
4802 echo "*** the shared libraries using the --site-runtime-libraries option."
4804 echo "*** Another way to shoot yourself in the foot is to specify"
4805 echo "*** --with-FEATURE when FEATURE is not actually installed on your"
4806 echo "*** system. Don't do that."
4810 if test "$win32_processes" = "yes"; then
4811 XE_ADD_OBJS(process-nt.o)
4813 AC_DEFINE(HAVE_UNIX_PROCESSES)
4814 XE_ADD_OBJS(process-unix.o)
4817 dnl --------------------------------
4818 dnl Compute SUBST-itutable variables
4819 dnl --------------------------------
4821 dnl We ignore (C|LD)_SWITCH_X_(MACHINE|SYSTEM)
4822 dnl Use XE_SPACE instead of plain assignment statements to remove extraneous blanks
4823 XE_SPACE(CFLAGS, $CFLAGS)
4824 XE_SPACE(extra_objs, $extra_objs)
4825 XE_SPACE(c_switch_general, -DHAVE_CONFIG_H $c_switch_site $c_switch_machine $c_switch_system)
4826 XE_SPACE(c_switch_window_system, $c_switch_x_site $c_switch_gtk $X_CFLAGS)
4827 XE_SPACE(c_switch_all, $c_switch_general $c_switch_window_system)
4828 XE_SPACE(ld_switch_general, $ld_switch_site $ld_switch_machine $ld_switch_system $ld_switch_run)
4829 XE_SPACE(ld_switch_window_system, $ld_switch_x_site)
4830 XE_SPACE(ld_switch_all, $ld_switch_general $ld_switch_window_system)
4831 XE_SPACE(ld_libs_general, $LIBS $libs_machine $libs_system $libs_standard)
4832 XE_SPACE(ld_libs_window_system, $X_EXTRA_LIBS $libs_x $libs_gtk $X_PRE_LIBS)
4833 XE_SPACE(ld_libs_all, $ld_libs_window_system $ld_libs_general)
4835 dnl Compute lists of Makefiles and subdirs
4836 AC_SUBST(SRC_SUBDIR_DEPS)
4837 XE_APPEND(src, MAKE_SUBDIR)
4838 internal_makefile_list="Makefile.in"
4840 test -d lock || mkdir lock
4841 for dir in $MAKE_SUBDIR; do
4842 case "$dir" in */* ) dnl Implement mkdir -p
4843 ( for d in `echo $dir | sed 's:/: :g'` ; do
4844 test -d "$d" || mkdir "$d"; cd "$d"
4846 * ) test -d "$dir" || mkdir "$dir" ;;
4848 XE_SPACE(SUBDIR_MAKEFILES, $SUBDIR_MAKEFILES $dir/Makefile $dir/GNUmakefile)
4849 XE_SPACE(internal_makefile_list, $internal_makefile_list $dir/Makefile.in)
4851 AC_SUBST(INSTALL_ARCH_DEP_SUBDIR)
4852 AC_SUBST(MAKE_SUBDIR)
4853 AC_SUBST(SUBDIR_MAKEFILES)
4855 dnl Make s&m symlinks in the src directory, for config.h
4856 for dir in src/s src/m; do
4857 if test ! -d "$dir" ; then
4858 echo Making symbolic link to "$srcdir/$dir"
4859 ${LN_S} "$srcdir/$dir" "$dir"
4863 if test "$extra_verbose" = "yes"; then
4865 PRINT_VAR(extra_objs
4866 c_switch_general c_switch_window_system c_switch_all
4867 ld_switch_general ld_switch_window_system ld_switch_all
4868 ld_libs_general ld_libs_window_system ld_libs_all)
4872 dnl ----------------------------------------------
4873 dnl Create some auxiliary files for developers.
4874 dnl ----------------------------------------------
4876 dnl Create a .gdbinit useful for debugging XEmacs
4877 if test -f "$srcdir/src/.gdbinit" -a ! -f "src/.gdbinit"; then
4878 test "$extra_verbose" = "yes" && echo "creating src/.gdbinit"
4879 echo "source $srcdir/src/.gdbinit" > "src/.gdbinit"
4882 dnl Create a .dbxrc useful for debugging XEmacs
4883 if test -f "$srcdir/src/.dbxrc" -a ! -f "src/.dbxrc"; then
4884 test "$extra_verbose" = "yes" && echo "creating src/.dbxrc"
4885 echo ". $srcdir/src/.dbxrc" > "src/.dbxrc"
4888 dnl Create a useful TAGS file
4889 if test -f "$srcdir/TAGS" -a ! -f "TAGS"; then
4890 test "$extra_verbose" = "yes" && echo "creating TAGS"
4892 $srcdir/TAGS,include" > "TAGS"
4895 dnl Create top level .sbinit for Sun compilers
4896 if test "$__SUNPRO_C" = "yes"; then
4897 test "$extra_verbose" = "yes" && echo "creating .sbinit"
4898 ( echo "# For use with Sun WorkShop's Source browser."
4899 echo "# See sbquery(1) and sbinit(4) for more information"
4900 for dir in $MAKE_SUBDIR; do echo "import $dir"; done
4904 dnl There are no more compile tests; remove the core they created.
4907 dnl ----------------------------------------------
4908 dnl Substitute into Makefile, config.h and paths.h
4909 dnl ----------------------------------------------
4911 dnl what sort of things to edit into Makefile, config.h and paths.h
4912 dnl configuration here uncanonicalized to avoid exceeding size limits.
4916 AC_SUBST(configuration)
4918 AC_SUBST(inststaticdir)
4919 AC_SUBST(instvardir)
4927 AC_SUBST(extra_includes)
4930 AC_SUBST(PREFIX_USER_DEFINED)
4931 dnl Yo, Stephen Bourne! I want to marry you!
4935 *\$* ) eval "PREFIX=$PREFIX" ;;
4941 AC_SUBST(exec_prefix)
4942 AC_SUBST(EXEC_PREFIX_USER_DEFINED)
4943 EXEC_PREFIX=$exec_prefix
4945 case "$EXEC_PREFIX" in
4946 *\$* ) eval "EXEC_PREFIX=$EXEC_PREFIX" ;;
4950 AC_SUBST(EXEC_PREFIX)
4953 AC_SUBST(INFODIR_USER_DEFINED)
4957 *\$* ) eval "INFODIR=$INFODIR" ;;
4964 AC_SUBST(INFOPATH_USER_DEFINED)
4968 *\$* ) eval "INFOPATH=$INFOPATH" ;;
4974 AC_SUBST(package_path)
4975 AC_SUBST(PACKAGE_PATH_USER_DEFINED)
4976 PACKAGE_PATH=$package_path
4978 case "$PACKAGE_PATH" in
4979 *\$* ) eval "PACKAGE_PATH=$PACKAGE_PATH" ;;
4983 AC_SUBST(PACKAGE_PATH)
4986 AC_SUBST(LISPDIR_USER_DEFINED)
4990 *\$* ) eval "LISPDIR=$LISPDIR" ;;
4997 AC_SUBST(MODULEDIR_USER_DEFINED)
4998 MODULEDIR=$moduledir
5000 case "$MODULEDIR" in
5001 *\$* ) eval "MODULEDIR=$MODULEDIR" ;;
5007 AC_SUBST(sitelispdir)
5008 AC_SUBST(SITELISPDIR_USER_DEFINED)
5009 SITELISPDIR=$sitelispdir
5011 case "$SITELISPDIR" in
5012 *\$* ) eval "SITELISPDIR=$SITELISPDIR" ;;
5016 AC_SUBST(SITELISPDIR)
5018 AC_SUBST(sitemoduledir)
5019 AC_SUBST(SITEMODULEDIR_USER_DEFINED)
5020 SITEMODULEDIR=$sitemoduledir
5022 case "$SITEMODULEDIR" in
5023 *\$* ) eval "SITEMODULEDIR=$SITEMODULEDIR" ;;
5027 AC_SUBST(SITEMODULEDIR)
5030 AC_SUBST(ETCDIR_USER_DEFINED)
5034 *\$* ) eval "ETCDIR=$ETCDIR" ;;
5041 AC_SUBST(DOCDIR_USER_DEFINED)
5045 *\$* ) eval "DOCDIR=$DOCDIR" ;;
5051 AC_SUBST(archlibdir)
5052 AC_SUBST(ARCHLIBDIR_USER_DEFINED)
5053 ARCHLIBDIR=$archlibdir
5055 case "$ARCHLIBDIR" in
5056 *\$* ) eval "ARCHLIBDIR=$ARCHLIBDIR" ;;
5060 AC_SUBST(ARCHLIBDIR)
5064 AC_SUBST(extra_objs)
5066 dnl The following flags combine all the information from:
5067 dnl - command line options (user always gets priority)
5068 dnl - user environment variables
5069 dnl - determined by configure
5070 dnl - the s&m header files (required for ellcc)
5073 AC_SUBST(c_switch_general)
5074 AC_SUBST(c_switch_window_system)
5075 AC_SUBST(c_switch_all)
5076 AC_SUBST(ld_switch_general)
5077 AC_SUBST(ld_switch_window_system)
5078 AC_SUBST(ld_switch_all)
5079 AC_SUBST(ld_libs_general)
5080 AC_SUBST(ld_libs_window_system)
5081 AC_SUBST(ld_libs_all)
5085 RECURSIVE_MAKE_ARGS="\$(MFLAGS) CC='\$(CC)' CFLAGS='\$(CFLAGS)' LDFLAGS='\$(LDFLAGS)' CPPFLAGS='\$(CPPFLAGS)'"
5086 AC_SUBST(RECURSIVE_MAKE_ARGS)
5088 AC_SUBST(native_sound_lib)
5089 AC_SUBST(sound_cflags)
5091 AC_SUBST(dynodump_arch)
5093 dnl Preliminary support for using a different compiler for xemacs itself.
5094 dnl Useful for building XEmacs with a C++ or 64-bit compiler.
5098 dnl The default is yes
5099 if test "$with_prefix" = "yes"; then
5100 AC_DEFINE(PREFIX_USER_DEFINED)
5103 dnl The default is no
5104 if test "$with_site_lisp" = "no"; then
5105 AC_DEFINE(INHIBIT_SITE_LISP)
5107 dnl The default is yes
5108 if test "$with_site_modules" = "no"; then
5109 AC_DEFINE(INHIBIT_SITE_MODULES)
5112 XE_SPACE(ac_configure_args, $ac_configure_args)
5113 AC_DEFINE_UNQUOTED(EMACS_CONFIGURATION, "$configuration")
5114 AC_DEFINE_UNQUOTED(EMACS_CONFIG_OPTIONS, "$ac_configure_args")
5116 dnl Following are deprecated
5119 AC_DEFINE_UNQUOTED(LD_SWITCH_X_SITE, $null_string)
5120 AC_DEFINE_UNQUOTED(LD_SWITCH_X_SITE_AUX, $null_string)
5121 AC_DEFINE_UNQUOTED(C_SWITCH_X_SITE, $null_string)
5122 AC_DEFINE_UNQUOTED(LD_SWITCH_SITE, $null_string)
5123 AC_DEFINE_UNQUOTED(C_SWITCH_SITE, $null_string)
5125 dnl Note: as a general rule, *only* define things here that are not
5126 dnl autodetected. For things that are autodetected, define them
5127 dnl at the point where the autodetection occurs or would occur,
5128 dnl so that the user gets immediate feedback on the results of the
5131 if test "$GNU_MALLOC" = "yes"; then AC_DEFINE(GNU_MALLOC)
5132 elif test "$with_system_malloc" = "yes"; then AC_DEFINE(USE_SYSTEM_MALLOC)
5133 elif test "$with_debug_malloc" = "yes"; then AC_DEFINE(USE_DEBUG_MALLOC)
5134 AC_DEFINE(USE_SYSTEM_MALLOC)
5136 test "$with_i18n3" = "yes" && AC_DEFINE(I18N3)
5137 test "$GCC" = "yes" && AC_DEFINE(USE_GCC)
5138 test "$external_widget" = "yes" && AC_DEFINE(EXTERNAL_WIDGET)
5139 test "$quick_build" = "yes" && AC_DEFINE(QUICK_BUILD)
5140 test "$with_purify" = "yes" && AC_DEFINE(PURIFY)
5141 test "$with_quantify" = "yes" && AC_DEFINE(QUANTIFY)
5142 test "$with_pop" = "yes" && AC_DEFINE(MAIL_USE_POP)
5143 test "$with_kerberos" = "yes" && AC_DEFINE(KERBEROS)
5144 test "$with_hesiod" = "yes" && AC_DEFINE(HESIOD)
5145 test "$use_union_type" = "yes" && AC_DEFINE(USE_UNION_TYPE)
5146 test "$use_regex_malloc" = "yes" && AC_DEFINE(REGEX_MALLOC)
5147 test "$pdump" = "yes" && AC_DEFINE(PDUMP)
5148 test "$with_ipv6_cname" = "yes" && AC_DEFINE(IPV6_CANONICALIZE)
5150 dnl -------------------------------
5151 dnl Report on what we decided to do
5152 dnl -------------------------------
5155 dnl /etc/osversion is on SONY NEWS-OS
5156 if test -f /etc/osversion; then dnl SONY NEWS-OS
5157 echo "osversion: `cat /etc/osversion`"
5159 echo "uname -a: `uname -a`"
5162 echo "$0 $quoted_arguments"
5165 if test ! -z ${emacs_beta_version} ; then
5166 if test -z "${emacs_is_beta}" ; then
5167 xemacs_betaname=".${emacs_beta_version}"
5169 xemacs_betaname="-b${emacs_beta_version}"
5175 dnl Start stdout redirection to '| tee -a Installation'
5179 XEmacs ${emacs_major_version}.${emacs_minor_version}${xemacs_betaname} \"$xemacs_codename\" configured for \`$canonical'.
5182 Compilation / Installation:"
5183 echo " Source code location: $srcdir"
5184 echo " Installation prefix: $prefix"
5185 if test -n "$site_includes"; then
5186 echo " Additional header files: $site_includes"
5188 if test -n "$site_libraries"; then
5189 echo " Additional libraries: $site_libraries"
5191 if test -n "$site_prefixes"; then
5192 echo " Additional prefixes: $site_prefixes"
5194 if test -n "$runpath"; then
5195 echo " Runtime library search path: $runpath"
5198 if test -n "$opsysfile"
5199 then echo " Operating system description file: \`$opsysfile'"
5200 else echo " Not using any operating system description file"
5202 if test -n "$machfile"
5203 then echo " Machine description file: \`$machfile'"
5204 else echo " Not using any machine description file"
5207 echo " Compiler: $CC $CFLAGS"
5208 dnl Let's save some helpful-for-debugging info like compiler and libc versions..
5209 dnl First, see if it's gcc - the same check works everyplace...
5211 gcc*) echo " Compiler version: `$CC --version | sed 1q`"
5212 echo " Compiler specs file: `$CC -v 2>&1 | sed 's/.* \([[^ ]]\)/\1/' | sed 1q`"
5214 dnl non-gcc machine-specific magic - contributions welcome
5215 *) case "$canonical" in
5217 dnl Yes, it's this ugly for AIX...
5219 dnl Might be a symlink created by replaceCset command
5220 if test -L $realcc ; then
5221 ccdir=`dirname $realcc`
5222 ccprog=`/bin/ls -l $realcc | sed 's/.* \([[^ ]]\)/\1/'`
5223 dnl This doesn't handle ../../xlc type stuff, but I've not seen one...
5225 */*) realcc=$ccprog;;
5226 *) realcc=$ccdir/$ccprog;;
5229 lpp=`lslpp -wqc $realcc | cut -f2 -d:`
5230 if test ! -z "$lpp" ; then
5231 lppstr=`lslpp -Lqc $lpp`
5232 lpplev=`echo "$lppstr" | cut -f3 -d:`
5233 lppdesc=`echo "$lppstr" | cut -f8 -d:`
5235 if test ! -z "$lpplev" ; then
5236 echo " Compiler version: $lpp $lpplev - $lppdesc"
5238 echo " Compiler version: (unknown version)"
5243 ccvers=`$CC -V 2>&1 | sed 1q`
5244 if test ! -z "$ccvers" ; then
5245 echo " Compiler version: $ccvers"
5250 ccvers=`$CC -V | tr '\n' ' '`
5251 if test ! -z "$ccvers" ; then
5252 echo " Compiler version: $ccvers"
5257 ccvers=`$CC -version`
5258 if test ! -z "$ccvers" ; then
5259 echo " Compiler version: $ccvers"
5263 dnl Intel C++ Compiler on Linux
5264 i[[3-9]]86-pc-linux)
5265 ccvers=`$CC -V 2>&1 | sed -n 's@^Intel.*Version @@'p`
5266 if test ! -z "$ccvers" ; then
5267 echo " Compiler version: $ccvers"
5271 *) echo " Compiler version: $CC on $canonical";;
5275 echo " Relocating allocator for buffers: $rel_alloc"
5276 echo " GNU version of malloc: ${GNU_MALLOC}${GNU_MALLOC_reason}"
5277 case "$ld_switch_site" in
5278 *nocombreloc*) echo " Linking with \`-z nocombreloc'.
5279 - Consider configuring with --pdump." ;;
5282 dnl Now get the libc version - contributions welcome
5283 case "$canonical" in
5285 if test -f /etc/redhat-release ; then
5286 echo " libc: `rpm -q glibc`";
5287 dnl need a Debian and Suse check here...
5289 echo "Need to guess glibc1/2/etc here";
5294 echo " libc: bos.rte.libc `lslpp -Lqc bos.rte.libc | cut -f3 -d:`"
5298 libc=`pkginfo -l SUNWcsl | grep VERSION: | awk '{print $2}'`
5299 echo " libc: SUNWcsl $libc"
5304 echo " IRIX version: `uname -sRm`'"
5309 dnl Another ugly case
5311 libc=` grep -h libc.so *.inv | awk '$9 == "f" {print $12}' | tr '\n' ','`
5317 *) echo " libc: system-provided libc on $canonical" ;;
5323 if test "$with_msw" = "yes"; then
5324 echo " Compiling in support for the Microsoft window system."
5326 if test "$with_x11" = "yes"; then
5327 echo " Compiling in support for the X window system:"
5328 echo " - X Windows headers location: $x_includes"
5329 echo " - X Windows libraries location: $x_libraries"
5330 if test "$with_xauth" != yes; then
5331 echo " - Xau (X authority) not available."
5333 if test "$with_xmu" != yes; then
5334 echo " - Xmu library not available; substituting equivalent routines."
5336 if test "$with_wmcommand" != no; then
5337 echo " - Handling WM_COMMAND properly."
5340 if test "$need_motif" = "yes" ; then
5341 echo " Compiling in support for Motif."
5342 if test "$have_lesstif" = "yes"; then
5343 echo " - Using LessTif implementation."
5345 echo " *WARNING* Many versions of Motif are buggy, requiring workarounds."
5346 echo " You are likely to experience slow redisplay."
5347 echo " You may need to install vendor patches to Motif."
5348 echo " See PROBLEMS for more information."
5350 if test "$need_athena" = "yes"; then
5351 echo " Compiling in support for the Athena widget set:"
5352 echo " - Athena headers location: $athena_h_path"
5353 echo " - Athena library to link: $athena_lib"
5355 case "$with_menubars" in
5356 gtk ) echo " Using GTK menubars." ;;
5357 lucid ) echo " Using Lucid menubars." ;;
5358 motif ) echo " Using Motif menubars."
5359 echo " *WARNING* The Motif menubar implementation is currently buggy."
5360 echo " We recommend using the Lucid menubar instead."
5361 echo " Re-run configure with --with-menubars='lucid'." ;;
5362 msw ) echo " Using MS-Windows menubars." ;;
5364 case "$with_scrollbars" in
5365 gtk ) echo " Using GTK scrollbars." ;;
5366 lucid ) echo " Using Lucid scrollbars." ;;
5367 motif ) echo " Using Motif scrollbars." ;;
5368 athena ) echo " Using Athena scrollbars." ;;
5369 msw ) echo " Using MS-Windows scrollbars." ;;
5371 case "$with_dialogs" in
5372 gtk ) echo " Using GTK dialog boxes." ;;
5373 motif ) echo " Using Motif dialog boxes."
5374 if test "$unexec" = "unexaix.o"; then if test "`uname -v`" = 4 -a "`uname -r`" -ge 3; then
5375 echo " *WARNING* The Motif dialog boxes cause problems on AIX 4.3 and higher."
5376 echo " We recommend using the Athena dialog boxes instead."
5377 echo " Install libXaw and re-run configure with --with-dialogs='athena'."
5378 echo " Read the PROBLEMS file for more information."
5380 athena ) echo " Using Athena dialog boxes." ;;
5381 msw ) echo " Using MS-Windows dialog boxes." ;;
5383 case "$with_widgets" in
5384 gtk ) echo " Using GTK native widgets." ;;
5385 motif ) echo " Using Motif native widgets." ;;
5386 athena ) echo " Using Athena native widgets." ;;
5387 msw ) echo " Using MS-Windows native widgets." ;;
5389 if test "$with_dragndrop" = yes; then
5390 echo " Compiling in support for Drag'n'Drop (EXPERIMENTAL)."
5391 echo " - Drag'n'Drop prototype: $dragndrop_proto."
5396 test "$with_ncurses" = yes && echo " Compiling in support for ncurses."
5397 test "$with_gpm" = yes && echo " Compiling in support for GPM (General Purpose Mouse)."
5401 test "$with_gif" = yes && echo " Compiling in support for GIF images (builtin)."
5402 if test "$with_xpm" = yes; then
5403 echo " Compiling in support for XPM images."
5404 elif test "$with_x11" = yes; then
5405 echo " WARNING: -----------------------------------------------------------"
5406 echo " WARNING: Compiling without XPM image support."
5407 if test "$xpm_problem" != ""; then
5408 echo " Reason: $xpm_problem"
5410 echo " WARNING: You should strongly consider installing XPM."
5411 echo " WARNING: Otherwise toolbars and other graphics will look suboptimal."
5412 echo " WARNING: (a copy may be found in ftp://ftp.xemacs.org/pub/xemacs/aux)"
5413 echo " WARNING: -----------------------------------------------------------"
5415 if test "$with_png" = yes; then
5416 echo " Compiling in support for PNG images."
5417 elif test "$window_system" != "none"; then
5418 echo " WARNING: -----------------------------------------------------------"
5419 echo " WARNING: Compiling without PNG image support."
5420 if test "$png_problem" != ""; then
5421 echo " Reason: $png_problem"
5423 echo " WARNING: You should strongly consider installing the PNG libraries."
5424 echo " WARNING: Otherwise certain images and glyphs may not display."
5425 echo " WARNING: (a copy may be found in ftp://ftp.xemacs.org/pub/xemacs/aux)"
5426 echo " WARNING: -----------------------------------------------------------"
5428 test "$with_jpeg" = yes && echo " Compiling in support for JPEG images."
5429 test "$with_tiff" = yes && echo " Compiling in support for TIFF images."
5430 test "$with_xface" = yes && echo " Compiling in support for X-Face message headers."
5434 test "$with_native_sound" = yes && echo " Compiling in support for sound (native)."
5435 test "$with_nas_sound" = yes && echo " Compiling in support for NAS (network audio system)."
5436 test "$old_nas" = yes && echo " - NAS library lacks error trapping; will play synchronously."
5437 test "$with_esd_sound" = yes && echo " Compiling in support for ESD (Enlightened Sound Daemon)."
5441 test "$with_database_berkdb" = yes && echo " Compiling in support for Berkeley database."
5442 test "$with_database_dbm" = yes && echo " Compiling in support for DBM."
5443 test "$with_database_gdbm" = yes && echo " Compiling in support for GNU DBM."
5444 test "$with_ldap" = yes && echo " Compiling in support for LDAP."
5445 if test "$with_postgresql" = yes; then
5446 echo " Compiling in support for PostgreSQL."
5447 echo " - Using PostgreSQL header file: $libpq_fe_h_file"
5448 test "$with_postgresqlv7" = yes && echo " - Using PostgreSQL V7 bindings."
5450 if test "$with_concord" = yes; then
5451 echo " Compiling in support for CONCORD."
5455 Multiscriptization / Multilingualization / Internationalization:"
5456 test "$with_mule" = yes && echo " Compiling in support for Mule (multi-lingual Emacs)."
5457 test "$with_chise" = yes && echo " Using CHISE (CHaracter Information Service Environment) support."
5458 test "$with_utf_2000" = yes && echo " Using UTF-2000 (UTF-8) buffer/string representation."
5459 test "$with_text_coding" = yes && echo " Compiling in support for text coding."
5460 test "$with_file_coding" = yes && echo " Compiling in support for file coding."
5461 test "$with_xim" != no && echo " Compiling in support for XIM (X11R5+ I18N input method)."
5462 test "$with_xim" = motif && echo " - Using Motif to provide XIM support."
5463 test "$with_xim" = xlib && echo " - Using raw Xlib to provide XIM support."
5464 test "$with_xfs" = yes && echo " - Using XFontSet to provide bilingual menubar."
5465 test "$with_canna" = yes && echo " Compiling in support for Canna on Mule."
5466 if test "$with_wnn" = yes; then
5467 echo " Compiling in support for the WNN input method on Mule."
5468 test "$with_wnn6" = yes && echo " - Using WNN version 6."
5470 test "$with_i18n3" = yes && echo " Compiling in support for I18N level 3 (doesn't currently work)."
5474 test "$with_pop" = yes && echo " Compiling in support for POP mail retrieval."
5475 test "$with_kerberos" = yes && echo " Compiling in support for Kerberos POP authentication."
5476 test "$with_hesiod" = yes && echo " Compiling in support for Hesiod POP server access."
5477 test -n "$mail_locking" && echo " Compiling in support for \"$mail_locking\" mail spool file locking method."
5481 test "$with_ipv6_cname" = no && echo " Inhibiting IPv6 canonicalization at startup."
5482 test "$with_tooltalk" = yes && echo " Compiling in support for ToolTalk."
5483 test "$with_workshop" = yes && echo " Compiling in support for Sun WorkShop."
5484 test "$with_socks" = yes && echo " Compiling in support for SOCKS."
5485 test "$with_dnet" = yes && echo " Compiling in support for DNET."
5486 test "$with_modules" = "yes" && echo " Compiling in support for dynamic shared object modules."
5487 if test "$use_union_type" = yes; then
5488 echo " WARNING: ---------------------------------------------------------"
5489 echo " Using the union type for Lisp_Objects."
5490 echo " Union type has been implicated in hard-to-debug runtime crashes."
5491 echo " Do NOT use this build of XEmacs for ordinary work. See PROBLEMS."
5492 echo " WARNING: ---------------------------------------------------------"
5494 if test "$use_regex_malloc" = no; then
5495 echo " WARNING: -----------------------------------------------------------"
5496 echo " Using alloca to allocate the failure stack."
5497 echo " It may be impossible to detect stack exhaustion, and you will crash."
5498 echo " Do NOT use this build of XEmacs for ordinary work."
5499 echo " WARNING: -----------------------------------------------------------"
5501 test "$pdump" = yes && echo " Using the new portable dumper."
5502 test "$debug" = yes && echo " Compiling in support for extra debugging code."
5503 test "$usage_tracking" = yes && echo " Compiling in support for active usage tracking (Sun internal)."
5504 if test "$error_check_extents $error_check_typecheck $error_check_bufpos $error_check_gc $error_check_malloc $error_check_glyphs" \
5505 != "no no no no no no"; then
5506 echo " WARNING: ---------------------------------------------------------"
5507 echo " WARNING: Compiling in support for runtime error checking."
5508 echo " WARNING: XEmacs will run noticeably more slowly as a result."
5509 echo " WARNING: Error checking is on by default for XEmacs beta releases."
5510 echo " WARNING: ---------------------------------------------------------"
5513 ) | tee -a Installation
5514 dnl echo "The above configure report is appended to \"Installation\" file."
5517 dnl -----------------------------------
5518 dnl Now generate config.h and Makefiles
5519 dnl -----------------------------------
5520 dnl This has to be called in order for this variable to get into config.status
5521 AC_SUBST(internal_makefile_list)
5522 # Remove any trailing slashes in these variables.
5523 test -n "$prefix" &&
5524 prefix=`echo '' "$prefix" | sed -e 's:^ ::' -e 's,\([[^/]]\)/*$,\1,'`
5525 test -n "$exec_prefix" &&
5526 exec_prefix=`echo '' "$exec_prefix" | sed -e 's:^ ::' -e 's,\([[^/]]\)/*$,\1,'`
5528 dnl Build Makefile.in's from Makefile.in.in's
5529 dnl except ./Makefile from $srcdir/Makefile.in
5531 for file in $internal_makefile_list; do
5532 test "$file" = src/Makefile.in && \
5533 file="src/Makefile.in:src/Makefile.in.in:src/depend"
5534 XE_APPEND($file, ac_output_files)
5536 ac_output_files="$ac_output_files src/paths.h lib-src/config.values"
5537 test "$with_modules" = "yes" && XE_APPEND(lib-src/ellcc.h, ac_output_files)
5539 AC_OUTPUT($ac_output_files,
5540 [for dir in . $MAKE_SUBDIR; do
5545 sed -e '/^# Generated/d' \
5546 -e 's%/\*\*/#.*%%' \
5548 dnl Delete Makefile.in.in comment lines
5550 dnl Pass through CPP directives unchanged
5555 dnl Quote other lines to protect from CPP substitution
5562 dnl Create a GNUmakefile and Makefile from Makefile.in.
5564 changequote(<<,>>)dnl
5565 dnl CPP_MAKEFILE(CPPFLAGS,filename)
5566 define(<<CPP_MAKEFILE>>,
5567 echo creating $dir/<<$2>>
5568 $CPP -I. -I${top_srcdir}/src <<$1>> junk.c \
5569 dnl Delete line directives inserted by $CPP
5570 | sed -e 's/^\#.*//' \
5571 dnl Delete spurious blanks inserted by $CPP
5572 -e 's/^[ TAB][ TAB]*$//'\
5574 dnl Delete blank lines
5576 dnl Restore lines quoted above to original contents.
5582 chmod 444 Makefile.new
5583 mv -f Makefile.new <<$2>>
5586 CPP_MAKEFILE(,Makefile)
5587 CPP_MAKEFILE(-DUSE_GNU_MAKE,GNUmakefile)
5593 dnl Append AC_DEFINE information to lib-src/config.values
5594 dnl (AC_SUBST information is already there (see config.values.sh).
5595 sed < config.status >> lib-src/config.values \
5596 -e '/{ac_dA}.*{ac_dB}.*{ac_dC}.*{ac_dD}$/!d' \
5597 -e 's/\${ac_dA}\(.*\)\${ac_dB}.*\${ac_dC}\(.*\)\${ac_dD}/\1 \2/' \
5598 -e 's/^\([[^ ]]*\) $/\1 ""/' \
5603 top_srcdir="$srcdir"
5604 MAKE_SUBDIR="$MAKE_SUBDIR"