update.

[chise/xemacs-chise.git-] / etc / Emacs.ad

! This is the app-defaults file for XEmacs.
!
! This used to be identical to sample.Xdefaults, but the resources
! below have been rewritten to be as general as possible to avoid
! overriding user resources.  Other than the form rewriting, both
! files should be kept in sync. 
! 
! The resources below are loaded into the XEmacs executable at compile-time:
! changes to .../etc/Emacs.ad made after XEmacs has been built will have no
! effect.
! 
! However, you may copy .../etc/Emacs.ad to /usr/lib/X11/app-defaults/Emacs
! (or whatever the standard app-defaults directory is at your site) to cause
! it to be consulted at run-time.  (Do this only for site-wide customizations:
! personal customizations should be put into ~/.Xdefaults instead.)
! Note that the file must be named Emacs, not XEmacs.
! 
! See the NEWS file (C-h n) or XEmacs manual (C-h i) for a description of
! the various resources and the syntax for setting them.


! Colors and backgrounds.
! ======================
! The contrasts of these colors will cause them to map to the appropriate
! one of "black" or "white" on monochrome systems.
! 
! The valid color names on your system can be found by looking in the file
! `rgb.txt', usually found in /usr/lib/X11/ or /usr/openwin/lib/X11/.

! Set the modeline colors.
!Emacs.modeline*attributeForeground:    Black
!Emacs.modeline*attributeBackground:    Gray75

! Set the color of the text cursor.
!Emacs.text-cursor*attributeBackground: Red3

! If you want to set the color of the mouse pointer, do this:
! Emacs.pointer*attributeForeground:    Black
! If you want to set the background of the mouse pointer, do this:
! Emacs.pointer*attributeBackground:    White
! Note that by default, the pointer foreground and background are the same
! as the default face.

! Set the menubar colors.  This overrides the default foreground and
! background colors specified above.
*menubar*Foreground:                    Gray30
*menubar*Background:                    Gray80
! This is for buttons in the menubar.  
! Yellow would be better, but that would map to white on monochrome.
*menubar*buttonForeground:              Blue
*XlwMenu*highlightForeground:           Red
*XlwMenu*titleForeground:               Maroon
*XlwMenu*selectColor:                   ForestGreen
*XmToggleButton*selectColor:            ForestGreen

! Specify the colors of popup menus.
*popup*Foreground:                      Black
*popup*Background:                      Gray80

! Specify the colors of the various sub-widgets of the dialog boxes.
*dialog*Foreground:                     Black
! #A5C0C1 is a shade of blue
*dialog*Background:                     #A5C0C1
! The following three are for Motif dialog boxes ...
*dialog*XmTextField*Background:         WhiteSmoke
*dialog*XmText*Background:              WhiteSmoke
*dialog*XmList*Background:              WhiteSmoke
! While this one is for Athena dialog boxes.
*dialog*Command*Background:             WhiteSmoke

! Xlw Scrollbar colors
*XlwScrollBar*Foreground:               Gray30
*XlwScrollBar*Background:               Gray80
*XmScrollBar*Foreground:                Gray30
*XmScrollBar*Background:                Gray80

!
! The Lucid Scrollbar supports two added resources, SliderStyle is either
! "plain" (default) or "dimple".  Dimple puts a small dimple in the middle
! of the slider that depresses when the slider is clicked on.  ArrowPosition is
! either "opposite" (default) or "same".  Opposite puts the arrows at opposite
! of the scrollbar, same puts both arrows at the same end, like the Amiga.
!
! Emacs*XlwScrollBar.SliderStyle:    dimple
! Emacs*XlwScrollBar.ArrowPosition:  opposite


!
! If you want to turn off a toolbar, set its height or width to 0.
! The correct size value is not really arbitrary.  We only control it
! this way in order to avoid excess frame resizing when turning the
! toolbars on and off.
!
! To change the heights and widths of the toolbars:
!
! Emacs.topToolBarHeight:               37
! Emacs.bottomToolBarHeight:            0
! Emacs.leftToolBarWidth:               0
! Emacs.rightToolBarWidth:              0

!*topToolBarShadowColor:                        Gray90
!*bottomToolBarShadowColor:             Gray40
!*backgroundToolBarColor:               Gray80
*toolBarShadowThickness:                2


! If you want to turn off vertical scrollbars, or change the default
! pixel width of the vertical scrollbars, do it like this (0 width
! means no vertical scrollbars):
! 
! Emacs.scrollBarWidth: 0
! 
! To change it for a particular frame, do this:
! 
! Emacs*FRAME-NAME.scrollBarWidth: 0


! If you want to turn off horizontal scrollbars, or change the default
! pixel height of the horizontal scrollbars, do it like this (0 height
! means no horizontal scrollbars):
! 
! Emacs.scrollBarHeight: 0
! 
! To change it for a particular frame, do this:
! 
! Emacs*FRAME-NAME.scrollBarHeight: 0


! To dynamically change the labels used for menubar buttons...
! 
! Emacs*XlwMenu.resourceLabels: True
! Emacs*XlwMenu.newFrame.labelString: Open Another Window

! To have the Motif scrollbars on the left instead of the right, do this:
! 
! Emacs*scrollBarPlacement: BOTTOM_LEFT
!
! To have the Athena scrollbars on the right, use `BOTTOM_RIGHT' instead

! To have Motif scrollbars act more like Xt scrollbars...
!
! Emacs*XmScrollBar.translations: #override \n\
!     <Btn1Down>:     PageDownOrRight(0)    \n\
!     <Btn3Down>:     PageUpOrLeft(0)

! Fonts.
! ======
! XEmacs requires the use of XLFD (X Logical Font Description) format font
! names, which look like
! 
!       *-courier-medium-r-*-*-*-120-*-*-*-*-*-*
! 
! if you use any of the other, less strict font name formats, some of which
! look like
!               lucidasanstypewriter-12
! and           fixed
! and           9x13
! 
! then XEmacs won't be able to guess the names of the bold and italic versions.
! All X fonts can be referred to via XLFD-style names, so you should use those
! forms.  See the man pages for X(1), xlsfonts(1), and xfontsel(1).


! The default font for the text area of XEmacs is chosen at run-time
! by lisp code which tries a number of different possibilities in order
! of preference.  If you wish to override it, use this:
! 
! Emacs.default.attributeFont:  -*-courier-medium-r-*-*-*-120-*-*-*-*-iso8859-*

! If you choose a font which does not have an italic version, you can specify
! some other font to use for it here:
! 
! Emacs.italic.attributeFont:  -*-courier-medium-o-*-*-*-120-*-*-*-*-iso8859-*
!
! If you choose a font which does not have a bold-italic version,
! you can specify some other font to use for it here:
! 
! Emacs.bold-italic.attributeFont:  -*-courier-bold-o-*-*-*-120-*-*-*-*-iso8859-*
! 
! And here is how you would set the background color of the `highlight' face,
! but only on the screen named `debugger':
! 
! Emacs*debugger.highlight.attributeBackground:         PaleTurquoise
! 
! See the NEWS file (C-h n) for a more complete description of the resource
! syntax of faces.


! Font of the modeline, menubar and pop-up menus.
! Note that the menubar resources do not use the `face' syntax, since they
! are X toolkit widgets and thus outside the domain of XEmacs proper.
! 
! When X Font Sets are enabled with ./configure --with-xfs (eg, for
! multilingual menubars and XIM), some .font resources (those specific to
! the Lucid widget set) are ignored in favor of .fontSet resources.  This
! example shows how to add fonts for Japanese menubars:
!
! *menubar*FontSet:     -*-helvetica-bold-r-*-*-*-120-*-*-*-*-iso8859-*, \
!                       -*-*-*-*-*-*-*-120-*-jisx0208.1983-0
!
*menubar*Font:                  -*-helvetica-bold-r-*-*-*-120-*-*-*-*-iso8859-*
*popup*Font:                    -*-helvetica-bold-r-*-*-*-120-*-*-*-*-iso8859-*
*menubar*FontSet:       -*-helvetica-bold-r-*-*-*-120-*-*-*-*-iso8859-*, \
                        -*-*-*-*-*-*-*-120-*-iso10646-1, \
                        -*-*-*-*-*-*-*-120-*-jisx0208.1983-0, \
                        -*-*-*-*-*-*-*-120-*-jisx0201.1976-0
*popup*FontSet:         -*-helvetica-bold-r-*-*-*-120-*-*-*-*-iso8859-*, \
                        -*-*-*-*-*-*-*-120-*-iso10646-1, \
                        -*-*-*-*-*-*-*-120-*-jisx0208.1983-0, \
                        -*-*-*-*-*-*-*-120-*-jisx0201.1976-0

! Gui elements share this font
!
Emacs.gui-element.attributeFont:  -*-helvetica-medium-r-*-*-*-120-*-*-*-*-iso8859-*

! Font in the Motif dialog boxes.
! (Motif uses `fontList' while most other things use `font' - if you don't
! know why you probably don't want to.)
! 
*XmDialogShell*FontList:        -*-helvetica-bold-r-*-*-*-120-*-*-*-*-iso8859-*
*XmTextField*FontList:          -*-courier-medium-r-*-*-*-120-*-*-*-*-iso8859-*
*XmText*FontList:               -*-courier-medium-r-*-*-*-120-*-*-*-*-iso8859-*
*XmList*FontList:               -*-courier-medium-r-*-*-*-120-*-*-*-*-iso8859-*

! Font in the Athena dialog boxes.
! I think 14-point looks nicer than 12-point.
! Some people use 12-point anyway because you get more text, but
! there's no purpose at all in doing this for dialog boxes.

*Dialog*Font:                   -*-helvetica-bold-r-*-*-*-140-*-*-*-*-iso8859-*

! Dialog box translations.
! =======================

! This accelerator binds <return> in a dialog box to <activate> on button1
*dialog*button1.accelerators:#override\
<KeyPress>Return: ArmAndActivate()\n\
<KeyPress>KP_Enter: ArmAndActivate()\n\
Ctrl<KeyPress>m: ArmAndActivate()\n

! Translations to make the TextField widget behave more like XEmacs
*XmTextField*translations: #override\n\
        !<Key>osfBackSpace:     delete-previous-character()\n\
        !<Key>osfDelete:        delete-previous-character()\n\
        !Ctrl<Key>h:            delete-previous-character()\n\
        !Ctrl<Key>d:            delete-next-character()\n\
        !Meta<Key>osfDelete:    delete-previous-word()\n\
        !Meta<Key>osfBackSpace: delete-previous-word()\n\
        !Meta<Key>d:            delete-next-word()\n\
        !Ctrl<Key>k:            delete-to-end-of-line()\n\
        !Ctrl<Key>g:            process-cancel()\n\
        !Ctrl<Key>b:            backward-character()\n\
        !<Key>osfLeft:          backward-character()\n\
        !Ctrl<Key>f:            forward-character()\n\
        !<Key>osfRight:         forward-character()\n\
        !Meta<Key>b:            backward-word()\n\
        !Meta<Key>osfLeft:      backward-word()\n\
        !Meta<Key>f:            forward-word()\n\
        !Meta<Key>osfRight:     forward-word()\n\
        !Ctrl<Key>e:            end-of-line()\n\
        !Ctrl<Key>a:            beginning-of-line()\n\
        !Ctrl<Key>w:            cut-clipboard()\n\
        !Meta<Key>w:            copy-clipboard()\n\
        <Btn2Up>:               copy-primary()\n

! With the XEmacs typeahead it's better to not have space be bound to
! ArmAndActivate() for buttons that appear in dialog boxes.  This is
! not 100% Motif compliant but the benefits far outweight the
! compliancy problem.  
*dialog*XmPushButton*translations:#override\n\
    <Btn1Down>:         Arm()\n\
    <Btn1Down>,<Btn1Up>: Activate()\
                        Disarm()\n\
    <Btn1Down>(2+):     MultiArm()\n\
    <Btn1Up>(2+):       MultiActivate()\n\
    <Btn1Up>:           Activate()\
                        Disarm()\n\
    <Key>osfSelect:     ArmAndActivate()\n\
    <Key>osfActivate:   ArmAndActivate()\n\
    <Key>osfHelp:       Help()\n\
    ~Shift ~Meta ~Alt <Key>Return:      ArmAndActivate()\n\
    <EnterWindow>:      Enter()\n\
    <LeaveWindow>:      Leave()\n

! Native Widget translations
! ======================= 
Emacs*Text*translations: #override\n\
        <Btn1Down>:     widget-focus-in() select-start()\n

! XIM input method style 
! ======================= 

! ximStyles is a (whitespace or comma-separated) list of XIMStyles in
! order of user's preference.  
! Choose a subset of the following styles or reorder to taste
*ximStyles: XIMPreeditPosition|XIMStatusArea\
            XIMPreeditPosition|XIMStatusNothing\
            XIMPreeditPosition|XIMStatusNone\
            XIMPreeditNothing|XIMStatusArea\
            XIMPreeditNothing|XIMStatusNothing\
            XIMPreeditNothing|XIMStatusNone\
            XIMPreeditNone|XIMStatusArea\
            XIMPreeditNone|XIMStatusNothing\
            XIMPreeditNone|XIMStatusNone

! XIM Preedit and Status foreground and background
*EmacsFrame.ximForeground: black
*EmacsFrame.ximBackground: white

! XIM fontset (defaults to system fontset default)
! *EmacsFrame.FontSet: -dt-interface user-medium-r-normal-s*-*-*-*-*-*-*-*-*