1 This is ../info/lispref.info, produced by makeinfo version 4.0 from
4 INFO-DIR-SECTION XEmacs Editor
6 * Lispref: (lispref). XEmacs Lisp Reference Manual.
11 GNU Emacs Lisp Reference Manual Second Edition (v2.01), May 1993 GNU
12 Emacs Lisp Reference Manual Further Revised (v2.02), August 1993 Lucid
13 Emacs Lisp Reference Manual (for 19.10) First Edition, March 1994
14 XEmacs Lisp Programmer's Manual (for 19.12) Second Edition, April 1995
15 GNU Emacs Lisp Reference Manual v2.4, June 1995 XEmacs Lisp
16 Programmer's Manual (for 19.13) Third Edition, July 1995 XEmacs Lisp
17 Reference Manual (for 19.14 and 20.0) v3.1, March 1996 XEmacs Lisp
18 Reference Manual (for 19.15 and 20.1, 20.2, 20.3) v3.2, April, May,
19 November 1997 XEmacs Lisp Reference Manual (for 21.0) v3.3, April 1998
21 Copyright (C) 1990, 1991, 1992, 1993, 1994, 1995 Free Software
22 Foundation, Inc. Copyright (C) 1994, 1995 Sun Microsystems, Inc.
23 Copyright (C) 1995, 1996 Ben Wing.
25 Permission is granted to make and distribute verbatim copies of this
26 manual provided the copyright notice and this permission notice are
27 preserved on all copies.
29 Permission is granted to copy and distribute modified versions of
30 this manual under the conditions for verbatim copying, provided that the
31 entire resulting derived work is distributed under the terms of a
32 permission notice identical to this one.
34 Permission is granted to copy and distribute translations of this
35 manual into another language, under the above conditions for modified
36 versions, except that this permission notice may be stated in a
37 translation approved by the Foundation.
39 Permission is granted to copy and distribute modified versions of
40 this manual under the conditions for verbatim copying, provided also
41 that the section entitled "GNU General Public License" is included
42 exactly as in the original, and provided that the entire resulting
43 derived work is distributed under the terms of a permission notice
44 identical to this one.
46 Permission is granted to copy and distribute translations of this
47 manual into another language, under the above conditions for modified
48 versions, except that the section entitled "GNU General Public License"
49 may be included in a translation approved by the Free Software
50 Foundation instead of in the original English.
53 File: lispref.info, Node: Trapping Errors, Next: Edebug Views, Prev: Breakpoints, Up: Edebug
58 An error may be signaled by subroutines or XEmacs Lisp code. If a
59 signal is not handled by a `condition-case', this indicates an
60 unrecognized situation has occurred. If Edebug is not active when an
61 unhandled error is signaled, `debug' is run normally (if
62 `debug-on-error' is non-`nil'). But while Edebug is active,
63 `debug-on-error' and `debug-on-quit' are bound to `edebug-on-error' and
64 `edebug-on-quit', which are both `t' by default. Actually, if
65 `debug-on-error' already has a non-`nil' value, that value is still
68 It is best to change the values of `edebug-on-error' or
69 `edebug-on-quit' when Edebug is not active since their values won't be
70 used until the next time Edebug is invoked at a deeper command level.
71 If you only change `debug-on-error' or `debug-on-quit' while Edebug is
72 active, these changes will be forgotten when Edebug becomes inactive.
73 Furthermore, during Edebug's recursive edit, these variables are bound
74 to the values they had outside of Edebug.
76 Edebug shows you the last stop point that it knew about before the
77 error was signaled. This may be the location of a call to a function
78 which was not instrumented, within which the error actually occurred.
79 For an unbound variable error, the last known stop point might be quite
80 distant from the offending variable. If the cause of the error is not
81 obvious at first, note that you can also get a full backtrace inside of
82 Edebug (see *Note Edebug Misc::).
84 Edebug can also trap signals even if they are handled. If
85 `debug-on-error' is a list of signal names, Edebug will stop when any
86 of these errors are signaled. Edebug shows you the last known stop
87 point just as for unhandled errors. After you continue execution, the
88 error is signaled again (but without being caught by Edebug). Edebug
89 can only trap errors that are handled if they are signaled in Lisp code
90 (not subroutines) since it does so by temporarily replacing the
94 File: lispref.info, Node: Edebug Views, Next: Edebug Eval, Prev: Trapping Errors, Up: Edebug
99 The following Edebug commands let you view aspects of the buffer and
100 window status that obtained before entry to Edebug.
103 View the outside window configuration (`edebug-view-outside').
106 Temporarily display the outside current buffer with point at its
107 outside position (`edebug-bounce-point'). If prefix arg is
108 supplied, sit for that many seconds instead.
111 Move point back to the current stop point (`edebug-where') in the
112 source code buffer. Also, if you use this command in another
113 window displaying the same buffer, this window will be used
114 instead to display the buffer in the future.
117 Toggle the `edebug-save-windows' variable which indicates whether
118 the outside window configuration is saved and restored
119 (`edebug-toggle-save-windows'). Also, each time it is toggled on,
120 make the outside window configuration the same as the current
121 window configuration.
123 With a prefix argument, `edebug-toggle-save-windows' only toggles
124 saving and restoring of the selected window. To specify a window
125 that is not displaying the source code buffer, you must use
126 `C-xXW' from the global keymap.
128 You can view the outside window configuration with `v' or just
129 bounce to the current point in the current buffer with `p', even if it
130 is not normally displayed. After moving point, you may wish to pop
131 back to the stop point with `w' from a source code buffer.
133 By using `W' twice, Edebug again saves and restores the outside
134 window configuration, but to the current configuration. This is a
135 convenient way to, for example, add another buffer to be displayed
136 whenever Edebug is active. However, the automatic redisplay of
137 `*edebug*' and `*edebug-trace*' may conflict with the buffers you wish
138 to see unless you have enough windows open.
141 File: lispref.info, Node: Edebug Eval, Next: Eval List, Prev: Edebug Views, Up: Edebug
146 While within Edebug, you can evaluate expressions "as if" Edebug were
147 not running. Edebug tries to be invisible to the expression's
148 evaluation and printing. Evaluation of expressions that cause side
149 effects will work as expected except for things that Edebug explicitly
150 saves and restores. See *Note The Outside Context:: for details on this
151 process. Also see *Note Reading in Edebug:: and *Note Printing in
152 Edebug:: for topics related to evaluation.
155 Evaluate expression EXP in the context outside of Edebug
156 (`edebug-eval-expression'). In other words, Edebug tries to avoid
157 altering the effect of EXP.
160 Evaluate expression EXP in the context of Edebug itself.
163 Evaluate the expression before point, in the context outside of
164 Edebug (`edebug-eval-last-sexp').
166 Edebug supports evaluation of expressions containing references to
167 lexically bound symbols created by the following constructs in `cl.el'
168 (version 2.03 or later): `lexical-let', `macrolet', and
172 File: lispref.info, Node: Eval List, Next: Reading in Edebug, Prev: Edebug Eval, Up: Edebug
174 Evaluation List Buffer
175 ----------------------
177 You can use the "evaluation list buffer", called `*edebug*', to
178 evaluate expressions interactively. You can also set up the
179 "evaluation list" of expressions to be evaluated automatically each
180 time Edebug updates the display.
183 Switch to the evaluation list buffer `*edebug*'
184 (`edebug-visit-eval-list').
186 In the `*edebug*' buffer you can use the commands of Lisp
187 Interaction as well as these special commands:
190 Evaluate the expression before point, in the outside context, and
191 insert the value in the buffer (`edebug-eval-print-last-sexp').
194 Evaluate the expression before point, in the context outside of
195 Edebug (`edebug-eval-last-sexp').
198 Build a new evaluation list from the first expression of each
199 group, reevaluate and redisplay (`edebug-update-eval-list').
200 Groups are separated by comment lines.
203 Delete the evaluation list group that point is in
204 (`edebug-delete-eval-item').
207 Switch back to the source code buffer at the current stop point
210 You can evaluate expressions in the evaluation list window with
211 `LFD' or `C-x C-e', just as you would in `*scratch*'; but they are
212 evaluated in the context outside of Edebug.
214 The expressions you enter interactively (and their results) are lost
215 when you continue execution unless you add them to the evaluation list
216 with `C-c C-u'. This command builds a new list from the first
217 expression of each "evaluation list group". Groups are separated by
218 comment lines. Be careful not to add expressions that execute
219 instrumented code otherwise an infinite loop will result.
221 When the evaluation list is redisplayed, each expression is displayed
222 followed by the result of evaluating it, and a comment line. If an
223 error occurs during an evaluation, the error message is displayed in a
224 string as if it were the result. Therefore expressions that, for
225 example, use variables not currently valid do not interrupt your
228 Here is an example of what the evaluation list window looks like
229 after several expressions have been added to it:
233 ;---------------------------------------------------------------
235 #<window 16 on *scratch*>
236 ;---------------------------------------------------------------
239 ;---------------------------------------------------------------
241 "Symbol's value as variable is void: bad-var"
242 ;---------------------------------------------------------------
245 ;---------------------------------------------------------------
248 ;---------------------------------------------------------------
250 To delete a group, move point into it and type `C-c C-d', or simply
251 delete the text for the group and update the evaluation list with `C-c
252 C-u'. When you add a new group, be sure it is separated from its
253 neighbors by a comment line.
255 After selecting `*edebug*', you can return to the source code buffer
256 with `C-c C-w'. The `*edebug*' buffer is killed when you continue
257 execution, and recreated next time it is needed.
260 File: lispref.info, Node: Reading in Edebug, Next: Printing in Edebug, Prev: Eval List, Up: Edebug
265 To instrument a form, Edebug first reads the whole form. Edebug
266 replaces the standard Lisp Reader with its own reader that remembers the
267 positions of expressions. This reader is used by the Edebug
268 replacements for `eval-region', `eval-defun', `eval-buffer', and
269 `eval-current-buffer'.
271 Another package, `cl-read.el', replaces the standard reader with one
272 that understands Common Lisp reader macros. If you use that package,
273 Edebug will automatically load `edebug-cl-read.el' to provide
274 corresponding reader macros that remember positions of expressions. If
275 you define new reader macros, you will have to define similar reader
279 File: lispref.info, Node: Printing in Edebug, Next: Tracing, Prev: Reading in Edebug, Up: Edebug
284 If the result of an expression in your program contains a circular
285 reference, you may get an error when Edebug attempts to print it. You
286 can set `print-length' to a non-zero value to limit the print length of
287 lists (the number of cdrs), and in Emacs 19, set `print-level' to a
288 non-zero value to limit the print depth of lists. But you can print
289 such circular structures and structures that share elements more
290 informatively by using the `cust-print' package.
292 To load `cust-print' and activate custom printing only for Edebug,
293 simply use the command `M-x edebug-install-custom-print'. To restore
294 the standard print functions, use `M-x edebug-uninstall-custom-print'.
295 You can also activate custom printing for printing in any Lisp code;
296 see the package for details.
298 Here is an example of code that creates a circular structure:
301 (edebug-install-custom-print)
305 Edebug will print the result of the `setcar' as `Result: #1=(#1#
306 y)'. The `#1=' notation names the structure that follows it, and the
307 `#1#' notation references the previously named structure. This
308 notation is used for any shared elements of lists or vectors.
310 Independent of whether `cust-print' is active, while printing
311 results Edebug binds `print-length', `print-level', and `print-circle'
312 to `edebug-print-length' (`50'), `edebug-print-level' (`50'), and
313 `edebug-print-circle' (`t') respectively, if these values are
314 non-`nil'. Also, `print-readably' is bound to `nil' since some objects
315 simply cannot be printed readably.
318 File: lispref.info, Node: Tracing, Next: Coverage Testing, Prev: Printing in Edebug, Up: Edebug
323 In addition to automatic stepping through source code, which is also
324 called _tracing_ (see *Note Edebug Execution Modes::), Edebug can
325 produce a traditional trace listing of execution in a separate buffer,
328 If the variable `edebug-trace' is non-nil, each function entry and
329 exit adds lines to the trace buffer. On function entry, Edebug prints
330 `::::{' followed by the function name and argument values. On function
331 exit, Edebug prints `::::}' followed by the function name and result of
332 the function. The number of `:'s is computed from the recursion depth.
333 The balanced braces in the trace buffer can be used to find the
334 matching beginning or end of function calls. These displays may be
335 customized by replacing the functions `edebug-print-trace-before' and
336 `edebug-print-trace-after', which take an arbitrary message string to
339 The macro `edebug-tracing' provides tracing similar to function
340 enter and exit tracing, but for arbitrary expressions. This macro
341 should be explicitly inserted by you around expressions you wish to
342 trace the execution of. The first argument is a message string
343 (evaluated), and the rest are expressions to evaluate. The result of
344 the last expression is returned.
346 Finally, you can insert arbitrary strings into the trace buffer with
347 explicit calls to `edebug-trace'. The arguments of this function are
348 the same as for `message', but a newline is always inserted after each
349 string printed in this way.
351 `edebug-tracing' and `edebug-trace' insert lines in the trace buffer
352 even if Edebug is not active. Every time the trace buffer is added to,
353 the window is scrolled to show the last lines inserted. (There may be
354 some display problems if you use tracing along with the evaluation
358 File: lispref.info, Node: Coverage Testing, Next: The Outside Context, Prev: Tracing, Up: Edebug
363 Edebug provides a rudimentary coverage tester and display of
364 execution frequency. Frequency counts are always accumulated, both
365 before and after evaluation of each instrumented expression, even if
366 the execution mode is `Go-nonstop'. Coverage testing is only done if
367 the option `edebug-test-coverage' is non-`nil' because this is
368 relatively expensive. Both data sets are displayed by `M-x
369 edebug-display-freq-count'.
371 - Command: edebug-display-freq-count
372 Display the frequency count data for each line of the current
373 definition. The frequency counts are inserted as comment lines
374 after each line, and you can undo all insertions with one `undo'
375 command. The counts are inserted starting under the `(' before an
376 expression or the `)' after an expression, or on the last char of
377 a symbol. The counts are only displayed when they differ from
378 previous counts on the same line.
380 If coverage is being tested, whenever all known results of an
381 expression are `eq', the char `=' will be appended after the count
382 for that expression. Note that this is always the case for an
383 expression only evaluated once.
385 To clear the frequency count and coverage data for a definition,
389 For example, after evaluating `(fac 5)' with an embedded breakpoint,
390 and setting `edebug-test-coverage' to `t', when the breakpoint is
391 reached, the frequency data is looks like this:
394 (if (= n 0) (edebug))
403 The comment lines show that `fac' has been called 6 times. The
404 first `if' statement has returned 5 times with the same result each
405 time, and the same is true for the condition on the second `if'. The
406 recursive call of `fac' has not returned at all.
409 File: lispref.info, Node: The Outside Context, Next: Instrumenting Macro Calls, Prev: Coverage Testing, Up: Edebug
414 Edebug tries to be transparent to the program you are debugging. In
415 addition, most evaluations you do within Edebug (see *Note Edebug
416 Eval::) occur in the same outside context which is temporarily restored
417 for the evaluation. But Edebug is not completely successful and this
418 section explains precisely how it fails. Edebug operation unavoidably
419 alters some data in XEmacs, and this can interfere with debugging
420 certain programs. Also notice that Edebug's protection against change
421 of outside data means that any side effects _intended_ by the user in
422 the course of debugging will be defeated.
426 * Checking Whether to Stop:: When Edebug decides what to do.
427 * Edebug Display Update:: When Edebug updates the display.
428 * Edebug Recursive Edit:: When Edebug stops execution.
431 File: lispref.info, Node: Checking Whether to Stop, Next: Edebug Display Update, Up: The Outside Context
433 Checking Whether to Stop
434 ........................
436 Whenever Edebug is entered just to think about whether to take some
437 action, it needs to save and restore certain data.
439 * `max-lisp-eval-depth' and `max-specpdl-size' are both incremented
440 one time to reduce Edebug's impact on the stack. You could,
441 however, still run out of stack space when using Edebug.
443 * The state of keyboard macro execution is saved and restored. While
444 Edebug is active, `executing-macro' is bound to
445 `edebug-continue-kbd-macro'.
449 File: lispref.info, Node: Edebug Display Update, Next: Edebug Recursive Edit, Prev: Checking Whether to Stop, Up: The Outside Context
451 Edebug Display Update
452 .....................
454 When Edebug needs to display something (e.g., in trace mode), it
455 saves the current window configuration from "outside" Edebug. When you
456 exit Edebug (by continuing the program), it restores the previous window
459 XEmacs redisplays only when it pauses. Usually, when you continue
460 execution, the program comes back into Edebug at a breakpoint or after
461 stepping without pausing or reading input in between. In such cases,
462 XEmacs never gets a chance to redisplay the "outside" configuration.
463 What you see is the same window configuration as the last time Edebug
464 was active, with no interruption.
466 Entry to Edebug for displaying something also saves and restores the
467 following data, but some of these are deliberately not restored if an
468 error or quit signal occurs.
470 * Which buffer is current, and where point and mark are in the
471 current buffer are saved and restored.
473 * The Edebug Display Update, is saved and restored if
474 `edebug-save-windows' is non-`nil'. It is not restored on error
475 or quit, but the outside selected window _is_ reselected even on
476 error or quit in case a `save-excursion' is active. If the value
477 of `edebug-save-windows' is a list, only the listed windows are
480 The window start and horizontal scrolling of the source code
481 buffer are not restored, however, so that the display remains
484 * The value of point in each displayed buffer is saved and restored
485 if `edebug-save-displayed-buffer-points' is non-`nil'.
487 * The variables `overlay-arrow-position' and `overlay-arrow-string'
488 are saved and restored. So you can safely invoke Edebug from the
489 recursive edit elsewhere in the same buffer.
491 * `cursor-in-echo-area' is locally bound to `nil' so that the cursor
492 shows up in the window.
496 File: lispref.info, Node: Edebug Recursive Edit, Prev: Edebug Display Update, Up: The Outside Context
498 Edebug Recursive Edit
499 .....................
501 When Edebug is entered and actually reads commands from the user, it
502 saves (and later restores) these additional data:
504 * The current match data, for whichever buffer was current.
506 * `last-command', `this-command', `last-command-char',
507 `last-input-char', `last-input-event', `last-command-event',
508 `last-event-frame', `last-nonmenu-event', and `track-mouse' .
509 Commands used within Edebug do not affect these variables outside
512 The key sequence returned by `this-command-keys' is changed by
513 executing commands within Edebug and there is no way to reset the
514 key sequence from Lisp.
516 For Emacs 18, Edebug cannot save and restore the value of
517 `unread-command-char'. Entering Edebug while this variable has a
518 nontrivial value can interfere with execution of the program you
521 * Complex commands executed while in Edebug are added to the variable
522 `command-history'. In rare cases this can alter execution.
524 * Within Edebug, the recursion depth appears one deeper than the
525 recursion depth outside Edebug. This is not true of the
526 automatically updated evaluation list window.
528 * `standard-output' and `standard-input' are bound to `nil' by the
529 `recursive-edit', but Edebug temporarily restores them during
532 * The state of keyboard macro definition is saved and restored.
533 While Edebug is active, `defining-kbd-macro' is bound to
534 `edebug-continue-kbd-macro'.
538 File: lispref.info, Node: Instrumenting Macro Calls, Next: Edebug Options, Prev: The Outside Context, Up: Edebug
540 Instrumenting Macro Calls
541 -------------------------
543 When Edebug instruments an expression that calls a Lisp macro, it
544 needs additional advice to do the job properly. This is because there
545 is no way to tell which subexpressions of the macro call may be
546 evaluated. (Evaluation may occur explicitly in the macro body, or when
547 the resulting expansion is evaluated, or any time later.) You must
548 explain the format of macro call arguments by using `def-edebug-spec' to
549 define an "Edebug specification" for each macro.
551 - Macro: def-edebug-spec macro specification
552 Specify which expressions of a call to macro MACRO are forms to be
553 evaluated. For simple macros, the SPECIFICATION often looks very
554 similar to the formal argument list of the macro definition, but
555 specifications are much more general than macro arguments.
557 The MACRO argument may actually be any symbol, not just a macro
560 Unless you are using Emacs 19 or XEmacs, this macro is only defined
561 in Edebug, so you may want to use the following which is
562 equivalent: `(put 'MACRO 'edebug-form-spec 'SPECIFICATION)'
564 Here is a simple example that defines the specification for the
565 `for' macro described in the XEmacs Lisp Reference Manual, followed by
566 an alternative, equivalent specification.
569 (symbolp "from" form "to" form "do" &rest form))
572 (symbolp ['from form] ['to form] ['do body]))
574 Here is a table of the possibilities for SPECIFICATION and how each
575 directs processing of arguments.
578 All arguments are instrumented for evaluation.
581 None of the arguments is instrumented.
584 The symbol must have an Edebug specification which is used instead.
585 This indirection is repeated until another kind of specification is
586 found. This allows you to inherit the specification for another
590 The elements of the list describe the types of the arguments of a
591 calling form. The possible elements of a specification list are
592 described in the following sections.
596 * Specification List:: How to specify complex patterns of evaluation.
597 * Backtracking:: What Edebug does when matching fails.
598 * Debugging Backquote:: Debugging Backquote
599 * Specification Examples:: To help understand specifications.
602 File: lispref.info, Node: Specification List, Next: Backtracking, Up: Instrumenting Macro Calls
607 A "specification list" is required for an Edebug specification if
608 some arguments of a macro call are evaluated while others are not. Some
609 elements in a specification list match one or more arguments, but others
610 modify the processing of all following elements. The latter, called
611 "keyword specifications", are symbols beginning with ``&'' (e.g.
614 A specification list may contain sublists which match arguments that
615 are themselves lists, or it may contain vectors used for grouping.
616 Sublists and groups thus subdivide the specification list into a
617 hierarchy of levels. Keyword specifications only apply to the
618 remainder of the sublist or group they are contained in and there is an
619 implicit grouping around a keyword specification and all following
620 elements in the sublist or group.
622 If a specification list fails at some level, then backtracking may
623 be invoked to find some alternative at a higher level, or if no
624 alternatives remain, an error will be signaled. See *Note
625 Backtracking:: for more details.
627 Edebug specifications provide at least the power of regular
628 expression matching. Some context-free constructs are also supported:
629 the matching of sublists with balanced parentheses, recursive
630 processing of forms, and recursion via indirect specifications.
632 Each element of a specification list may be one of the following,
633 with the corresponding type of argument:
636 A single unevaluated expression.
639 A single evaluated expression, which is instrumented.
642 A place as in the Common Lisp `setf' place argument. It will be
643 instrumented just like a form, but the macro is expected to strip
644 the instrumentation. Two functions, `edebug-unwrap' and
645 `edebug-unwrap*', are provided to strip the instrumentation one
646 level or recursively at all levels.
649 Short for `&rest form'. See `&rest' below.
652 A function form: either a quoted function symbol, a quoted lambda
653 expression, or a form (that should evaluate to a function symbol
654 or lambda expression). This is useful when function arguments
655 might be quoted with `quote' rather than `function' since the body
656 of a lambda expression will be instrumented either way.
659 An unquoted anonymous lambda expression.
662 All following elements in the specification list are optional; as
663 soon as one does not match, Edebug stops matching at this level.
665 To make just a few elements optional followed by non-optional
666 elements, use `[&optional SPECS...]'. To specify that several
667 elements should all succeed together, use `&optional [SPECS...]'.
668 See the `defun' example below.
671 All following elements in the specification list are repeated zero
672 or more times. All the elements need not match in the last
675 To repeat only a few elements, use `[&rest SPECS...]'. To specify
676 all elements must match on every repetition, use `&rest
680 Each of the following elements in the specification list is an
681 alternative, processed left to right until one matches. One of the
682 alternatives must match otherwise the `&or' specification fails.
684 Each list element following `&or' is a single alternative even if
685 it is a keyword specification. (This breaks the implicit grouping
686 rule.) To group two or more list elements as a single
687 alternative, enclose them in `[...]'.
690 Each of the following elements is matched as alternatives as if by
691 using `&or', but if any of them match, the specification fails.
692 If none of them match, nothing is matched, but the `¬'
693 specification succeeds.
696 Indicates that the specification is for a defining form. The
697 defining form itself is not instrumented (i.e. Edebug does not
698 stop before and after the defining form), but forms inside it
699 typically will be instrumented. The `&define' keyword should be
700 the first element in a list specification.
702 Additional specifications that may only appear after `&define' are
703 described here. See the `defun' example below.
706 The argument, a symbol, is the name of the defining form.
707 But a defining form need not be named at all, in which case a
708 unique name will be created for it.
710 The `name' specification may be used more than once in the
711 specification and each subsequent use will append the
712 corresponding symbol argument to the previous name with ``@''
713 between them. This is useful for generating unique but
714 meaningful names for definitions such as `defadvice' and
718 The element following `:name' should be a symbol; it is used
719 as an additional name component for the definition. This is
720 useful to add a unique, static component to the name of the
721 definition. It may be used more than once. No argument is
725 The argument, a symbol, is the name of an argument of the
726 defining form. However, lambda list keywords (symbols
727 starting with ``&'') are not allowed. See `lambda-list' and
731 This matches the whole argument list of an XEmacs Lisp lambda
732 expression, which is a list of symbols and the keywords
733 `&optional' and `&rest'
736 The argument is the body of code in a definition. This is
737 like `body', described above, but a definition body must be
738 instrumented with a different Edebug call that looks up
739 information associated with the definition. Use `def-body'
740 for the highest level list of forms within the definition.
743 The argument is a single, highest-level form in a definition.
744 This is like `def-body', except use this to match a single
745 form rather than a list of forms. As a special case,
746 `def-form' also means that tracing information is not output
747 when the form is executed. See the `interactive' example
751 This is successful when there are no more arguments to match at the
752 current argument list level; otherwise it fails. See sublist
753 specifications and the backquote example below.
756 No argument is matched but backtracking through the gate is
757 disabled while matching the remainder of the specifications at
758 this level. This is primarily used to generate more specific
759 syntax error messages. See *Note Backtracking:: for more details.
760 Also see the `let' example below.
763 Any other symbol in a specification list may be a predicate or an
764 indirect specification.
766 If the symbol has an Edebug specification, this "indirect
767 specification" should be either a list specification that is used
768 in place of the symbol, or a function that is called to process the
769 arguments. The specification may be defined with `def-edebug-spec'
770 just as for macros. See the `defun' example below.
772 Otherwise, the symbol should be a predicate. The predicate is
773 called with the argument and the specification fails if the
774 predicate fails. The argument is not instrumented.
776 Predicates that may be used include: `symbolp', `integerp',
777 `stringp', `vectorp', `atom' (which matches a number, string,
778 symbol, or vector), `keywordp', and `lambda-list-keywordp'. The
779 last two, defined in `edebug.el', test whether the argument is a
780 symbol starting with ``:'' and ``&'' respectively.
783 Rather than matching a vector argument, a vector treats the
784 ELEMENTS as a single "group specification".
787 The argument should be a symbol named STRING. This specification
788 is equivalent to the quoted symbol, `'SYMBOL', where the name of
789 SYMBOL is the STRING, but the string form is preferred.
791 `'SYMBOL or (quote SYMBOL)'
792 The argument should be the symbol SYMBOL. But use a string
793 specification instead.
795 `(vector ELEMENTS...)'
796 The argument should be a vector whose elements must match the
797 ELEMENTS in the specification. See the backquote example below.
800 Any other list is a "sublist specification" and the argument must
801 be a list whose elements match the specification ELEMENTS.
803 A sublist specification may be a dotted list and the corresponding
804 list argument may then be a dotted list. Alternatively, the last
805 cdr of a dotted list specification may be another sublist
806 specification (via a grouping or an indirect specification, e.g.
807 `(spec . [(more specs...)])') whose elements match the non-dotted
808 list arguments. This is useful in recursive specifications such
809 as in the backquote example below. Also see the description of a
810 `nil' specification above for terminating such recursion.
812 Note that a sublist specification of the form `(specs . nil)'
813 means the same as `(specs)', and `(specs .
814 (sublist-elements...))' means the same as `(specs
815 sublist-elements...)'.
818 File: lispref.info, Node: Backtracking, Next: Debugging Backquote, Prev: Specification List, Up: Instrumenting Macro Calls
823 If a specification fails to match at some point, this does not
824 necessarily mean a syntax error will be signaled; instead,
825 "backtracking" will take place until all alternatives have been
826 exhausted. Eventually every element of the argument list must be
827 matched by some element in the specification, and every required element
828 in the specification must match some argument.
830 Backtracking is disabled for the remainder of a sublist or group when
831 certain conditions occur, described below. Backtracking is reenabled
832 when a new alternative is established by `&optional', `&rest', or
833 `&or'. It is also reenabled initially when processing a sublist or
834 group specification or an indirect specification.
836 You might want to disable backtracking to commit to some alternative
837 so that Edebug can provide a more specific syntax error message.
838 Normally, if no alternative matches, Edebug reports that none matched,
839 but if one alternative is committed to, Edebug can report how it failed
842 First, backtracking is disabled while matching any of the form
843 specifications (i.e. `form', `body', `def-form', and `def-body').
844 These specifications will match any form so any error must be in the
845 form itself rather than at a higher level.
847 Second, backtracking is disabled after successfully matching a quoted
848 symbol or string specification, since this usually indicates a
849 recognized construct. If you have a set of alternative constructs that
850 all begin with the same symbol, you can usually work around this
851 constraint by factoring the symbol out of the alternatives, e.g.,
852 `["foo" &or [first case] [second case] ...]'.
854 Third, backtracking may be explicitly disabled by using the `gate'
855 specification. This is useful when you know that no higher
856 alternatives may apply.
859 File: lispref.info, Node: Debugging Backquote, Next: Specification Examples, Prev: Backtracking, Up: Instrumenting Macro Calls
864 Backquote (``') is a macro that results in an expression that may or
865 may not be evaluated. It is often used to simplify the definition of a
866 macro to return an expression that is evaluated, but Edebug does not
867 know when this is the case. However, the forms inside unquotes (`,' and
868 `,@') are evaluated and Edebug instruments them.
870 Nested backquotes are supported by Edebug, but there is a limit on
871 the support of quotes inside of backquotes. Quoted forms (with `'')
872 are not normally evaluated, but if the quoted form appears immediately
873 within `,' and `,@' forms, Edebug treats this as a backquoted form at
874 the next higher level (even if there is not a next higher level - this
875 is difficult to fix).
877 If the backquoted forms happen to be code intended to be evaluated,
878 you can have Edebug instrument them by using `edebug-`' instead of the
879 regular ``'. Unquoted forms can always appear inside `edebug-`'
880 anywhere a form is normally allowed. But `(, FORM)' may be used in two
881 other places specially recognized by Edebug: wherever a predicate
882 specification would match, and at the head of a list form in place of a
883 function name or lambda expression. The FORM inside a spliced unquote,
884 `(,@ FORM)', will be wrapped, but the unquote form itself will not be
885 wrapped since this would interfere with the splicing.
887 There is one other complication with using `edebug-`'. If the
888 `edebug-`' call is in a macro and the macro may be called from code
889 that is also instrumented, and if unquoted forms contain any macro
890 arguments bound to instrumented forms, then you should modify the
891 specification for the macro as follows: the specifications for those
892 arguments must use `def-form' instead of `form'. (This is to
893 reestablish the Edebugging context for those external forms.)
895 For example, the `for' macro (*note Problems with Macros: ()Problems
896 with Macros.) is shown here but with `edebug-`' substituted for regular
900 (list 'setq var (list '1+ var)))
902 (defmacro for (var from init to final do &rest body)
903 (let ((tempvar (make-symbol "max")))
904 (edebug-` (let (((, var) (, init))
905 ((, tempvar) (, final)))
906 (while (<= (, var) (, tempvar))
910 Here is the corresponding modified Edebug specification and some code
911 that calls the macro:
914 (symbolp "from" def-form "to" def-form "do" &rest def-form))
917 (for i from n to (* n (+ n 1)) do
920 After instrumenting the `for' macro and the macro call, Edebug first
921 steps to the beginning of the macro call, then into the macro body,
922 then through each of the unquoted expressions in the backquote showing
923 the expressions that will be embedded in the backquote form. Then when
924 the macro expansion is evaluated, Edebug will step through the `let'
925 form and each time it gets to an unquoted form, it will jump back to an
926 argument of the macro call to step through that expression. Finally
927 stepping will continue after the macro call. Even more convoluted
928 execution paths may result when using anonymous functions.
930 When the result of an expression is an instrumented expression, it is
931 difficult to see the expression inside the instrumentation. So you may
932 want to set the option `edebug-unwrap-results' to a non-`nil' value
933 while debugging such expressions, but it would slow Edebug down to
937 File: lispref.info, Node: Specification Examples, Prev: Debugging Backquote, Up: Instrumenting Macro Calls
939 Specification Examples
940 ......................
942 Here we provide several examples of Edebug specifications to show
943 many of its capabilities.
945 A `let' special form has a sequence of bindings and a body. Each of
946 the bindings is either a symbol or a sublist with a symbol and optional
947 value. In the specification below, notice the `gate' inside of the
948 sublist to prevent backtracking.
952 &or symbolp (gate symbolp &optional form))
955 Edebug uses the following specifications for `defun' and `defmacro'
956 and the associated argument list and `interactive' specifications. It
957 is necessary to handle the expression argument of an interactive form
958 specially since it is actually evaluated outside of the function body.
960 (def-edebug-spec defmacro defun) ; Indirect ref to `defun' spec
961 (def-edebug-spec defun
962 (&define name lambda-list
963 [&optional stringp] ; Match the doc string, if present.
964 [&optional ("interactive" interactive)]
967 (def-edebug-spec lambda-list
969 [&optional ["&optional" arg &rest arg]]
970 &optional ["&rest" arg]
973 (def-edebug-spec interactive
974 (&optional &or stringp def-form)) ; Notice: `def-form'
976 The specification for backquote below illustrates how to match
977 dotted lists and use `nil' to terminate recursion. It also illustrates
978 how components of a vector may be matched. (The actual specification
979 provided by Edebug does not support dotted lists because doing so
980 causes very deep recursion that could fail.)
982 (def-edebug-spec ` (backquote-form)) ;; alias just for clarity
984 (def-edebug-spec backquote-form
985 (&or ([&or "," ",@"] &or ("quote" backquote-form) form)
986 (backquote-form . [&or nil backquote-form])
987 (vector &rest backquote-form)
991 File: lispref.info, Node: Edebug Options, Prev: Instrumenting Macro Calls, Up: Edebug
996 These options affect the behavior of Edebug:
998 - User Option: edebug-setup-hook
999 Functions to call before Edebug is used. Each time it is set to a
1000 new value, Edebug will call those functions once and then
1001 `edebug-setup-hook' is reset to `nil'. You could use this to load
1002 up Edebug specifications associated with a package you are using
1003 but only when you also use Edebug. See *Note Instrumenting::.
1005 - User Option: edebug-all-defs
1006 If non-`nil', normal evaluation of any defining forms (e.g.
1007 `defun' and `defmacro') will instrument them for Edebug. This
1008 applies to `eval-defun', `eval-region', and `eval-current-buffer'.
1010 Use the command `M-x edebug-all-defs' to toggle the value of this
1011 variable. You may want to make this variable local to each buffer
1012 by calling `(make-local-variable 'edebug-all-defs)' in your
1013 `emacs-lisp-mode-hook'. See *Note Instrumenting::.
1015 - User Option: edebug-all-forms
1016 If non-`nil', normal evaluation of any forms by `eval-defun',
1017 `eval-region', and `eval-current-buffer' will instrument them for
1020 Use the command `M-x edebug-all-forms' to toggle the value of this
1021 option. See *Note Instrumenting::.
1023 - User Option: edebug-save-windows
1024 If non-`nil', save and restore window configuration on Edebug
1025 calls. It takes some time to do this, so if your program does not
1026 care what happens to data about windows, you may want to set this
1029 If the value is a list, only the listed windows are saved and
1032 `M-x edebug-toggle-save-windows' may be used to change this
1033 variable. This command is bound to `W' in source code buffers.
1034 See *Note Edebug Display Update::.
1036 - User Option: edebug-save-displayed-buffer-points
1037 If non-`nil', save and restore point in all displayed buffers.
1038 This is necessary if you are debugging code that changes the point
1039 of a buffer which is displayed in a non-selected window. If
1040 Edebug or the user then selects the window, the buffer's point
1041 will be changed to the window's point.
1043 This is an expensive operation since it visits each window and
1044 therefore each displayed buffer twice for each Edebug activation,
1045 so it is best to avoid it if you can. See *Note Edebug Display
1048 - User Option: edebug-initial-mode
1049 If this variable is non-`nil', it specifies the initial execution
1050 mode for Edebug when it is first activated. Possible values are
1051 `step', `next', `go', `Go-nonstop', `trace', `Trace-fast',
1052 `continue', and `Continue-fast'.
1054 The default value is `step'. See *Note Edebug Execution Modes::.
1056 - User Option: edebug-trace
1057 Non-`nil' means display a trace of function entry and exit.
1058 Tracing output is displayed in a buffer named `*edebug-trace*', one
1059 function entry or exit per line, indented by the recursion level.
1061 The default value is `nil'.
1063 Also see `edebug-tracing'. See *Note Tracing::.
1065 - User Option: edebug-test-coverage
1066 If non-`nil', Edebug tests coverage of all expressions debugged.
1067 This is done by comparing the result of each expression with the
1068 previous result. Coverage is considered OK if two different
1069 results are found. So to sufficiently test the coverage of your
1070 code, try to execute it under conditions that evaluate all
1071 expressions more than once, and produce different results for each
1074 Use `M-x edebug-display-freq-count' to display the frequency count
1075 and coverage information for a definition. See *Note Coverage
1078 - User Option: edebug-continue-kbd-macro
1079 If non-`nil', continue defining or executing any keyboard macro
1080 that is executing outside of Edebug. Use this with caution since
1081 it is not debugged. See *Note Edebug Execution Modes::.
1083 - User Option: edebug-print-length
1084 If non-`nil', bind `print-length' to this while printing results
1085 in Edebug. The default value is `50'. See *Note Printing in
1088 - User Option: edebug-print-level
1089 If non-`nil', bind `print-level' to this while printing results in
1090 Edebug. The default value is `50'.
1092 - User Option: edebug-print-circle
1093 If non-`nil', bind `print-circle' to this while printing results
1094 in Edebug. The default value is `nil'.
1096 - User Option: edebug-on-error
1097 `debug-on-error' is bound to this while Edebug is active. See
1098 *Note Trapping Errors::.
1100 - User Option: edebug-on-quit
1101 `debug-on-quit' is bound to this while Edebug is active. See
1102 *Note Trapping Errors::.
1104 - User Option: edebug-unwrap-results
1105 Non-`nil' if Edebug should unwrap results of expressions. This is
1106 useful when debugging macros where the results of expressions are
1107 instrumented expressions. But don't do this when results might be
1108 circular or an infinite loop will result. See *Note Debugging
1111 - User Option: edebug-global-break-condition
1112 If non-`nil', an expression to test for at every stop point. If
1113 the result is non-nil, then break. Errors are ignored. See *Note
1114 Global Break Condition::.
1117 File: lispref.info, Node: Read and Print, Next: Minibuffers, Prev: Debugging, Up: Top
1119 Reading and Printing Lisp Objects
1120 *********************************
1122 "Printing" and "reading" are the operations of converting Lisp
1123 objects to textual form and vice versa. They use the printed
1124 representations and read syntax described in *Note Lisp Data Types::.
1126 This chapter describes the Lisp functions for reading and printing.
1127 It also describes "streams", which specify where to get the text (if
1128 reading) or where to put it (if printing).
1132 * Streams Intro:: Overview of streams, reading and printing.
1133 * Input Streams:: Various data types that can be used as input streams.
1134 * Input Functions:: Functions to read Lisp objects from text.
1135 * Output Streams:: Various data types that can be used as output streams.
1136 * Output Functions:: Functions to print Lisp objects as text.
1137 * Output Variables:: Variables that control what the printing functions do.
1140 File: lispref.info, Node: Streams Intro, Next: Input Streams, Up: Read and Print
1142 Introduction to Reading and Printing
1143 ====================================
1145 "Reading" a Lisp object means parsing a Lisp expression in textual
1146 form and producing a corresponding Lisp object. This is how Lisp
1147 programs get into Lisp from files of Lisp code. We call the text the
1148 "read syntax" of the object. For example, the text `(a . 5)' is the
1149 read syntax for a cons cell whose CAR is `a' and whose CDR is the
1152 "Printing" a Lisp object means producing text that represents that
1153 object--converting the object to its printed representation. Printing
1154 the cons cell described above produces the text `(a . 5)'.
1156 Reading and printing are more or less inverse operations: printing
1157 the object that results from reading a given piece of text often
1158 produces the same text, and reading the text that results from printing
1159 an object usually produces a similar-looking object. For example,
1160 printing the symbol `foo' produces the text `foo', and reading that text
1161 returns the symbol `foo'. Printing a list whose elements are `a' and
1162 `b' produces the text `(a b)', and reading that text produces a list
1163 (but not the same list) with elements `a' and `b'.
1165 However, these two operations are not precisely inverses. There are
1166 three kinds of exceptions:
1168 * Printing can produce text that cannot be read. For example,
1169 buffers, windows, frames, subprocesses and markers print into text
1170 that starts with `#'; if you try to read this text, you get an
1171 error. There is no way to read those data types.
1173 * One object can have multiple textual representations. For example,
1174 `1' and `01' represent the same integer, and `(a b)' and `(a .
1175 (b))' represent the same list. Reading will accept any of the
1176 alternatives, but printing must choose one of them.
1178 * Comments can appear at certain points in the middle of an object's
1179 read sequence without affecting the result of reading it.