1 ;;; simple.el --- basic editing commands for XEmacs
3 ;; Copyright (C) 1985-7, 1993-5, 1997 Free Software Foundation, Inc.
4 ;; Copyright (C) 1995 Tinker Systems and INS Engineering Corp.
5 ;; Copyright (C) 2000 Ben Wing.
7 ;; Maintainer: XEmacs Development Team
8 ;; Keywords: lisp, extensions, internal, dumped
10 ;; This file is part of XEmacs.
12 ;; XEmacs is free software; you can redistribute it and/or modify it
13 ;; under the terms of the GNU General Public License as published by
14 ;; the Free Software Foundation; either version 2, or (at your option)
17 ;; XEmacs is distributed in the hope that it will be useful, but
18 ;; WITHOUT ANY WARRANTY; without even the implied warranty of
19 ;; MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU
20 ;; General Public License for more details.
22 ;; You should have received a copy of the GNU General Public License
23 ;; along with XEmacs; see the file COPYING. If not, write to the Free
24 ;; Software Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA
27 ;;; Synched up with: FSF 19.34 [But not very closely].
31 ;; This file is dumped with XEmacs.
33 ;; A grab-bag of basic XEmacs commands not specifically related to some
34 ;; major mode or to file-handling.
36 ;; Changes for zmacs-style active-regions:
38 ;; beginning-of-buffer, end-of-buffer, count-lines-region,
39 ;; count-lines-buffer, what-line, what-cursor-position, set-goal-column,
40 ;; set-fill-column, prefix-arg-internal, and line-move (which is used by
41 ;; next-line and previous-line) set zmacs-region-stays to t, so that they
42 ;; don't affect the current region-hilighting state.
44 ;; mark-whole-buffer, mark-word, exchange-point-and-mark, and
45 ;; set-mark-command (without an argument) call zmacs-activate-region.
47 ;; mark takes an optional arg like the new Fmark_marker() does. When
48 ;; the region is not active, mark returns nil unless the optional arg is true.
50 ;; push-mark, pop-mark, exchange-point-and-mark, and set-marker, and
51 ;; set-mark-command use (mark t) so that they can access the mark whether
52 ;; the region is active or not.
54 ;; shell-command, shell-command-on-region, yank, and yank-pop (which all
55 ;; push a mark) have been altered to call exchange-point-and-mark with an
56 ;; argument, meaning "don't activate the region". These commands only use
57 ;; exchange-point-and-mark to position the newly-pushed mark correctly, so
58 ;; this isn't a user-visible change. These functions have also been altered
59 ;; to use (mark t) for the same reason.
61 ;; 97/3/14 Jareth Hein (jhod@po.iijnet.or.jp) added kinsoku processing (support
62 ;; for filling of Asian text) into the fill code. This was ripped bleeding from
63 ;; Mule-2.3, and could probably use some feature additions (like additional wrap
66 ;; 97/06/11 Steve Baur (steve@xemacs.org) Convert use of
67 ;; (preceding|following)-char to char-(after|before).
71 (defgroup editing-basics nil
72 "Most basic editing variables."
76 "Killing and yanking commands."
79 (defgroup fill-comments nil
80 "Indenting and filling of comments."
84 (defgroup paren-matching nil
85 "Highlight (un)matching of parens and expressions."
89 (defgroup log-message nil
90 "Messages logging and display customizations."
93 (defgroup warnings nil
94 "Warnings customizations."
98 (defcustom search-caps-disable-folding t
99 "*If non-nil, upper case chars disable case fold searching.
100 This does not apply to \"yanked\" strings."
102 :group 'editing-basics)
104 ;; This is stolen (and slightly modified) from FSF emacs's
105 ;; `isearch-no-upper-case-p'.
106 (defun no-upper-case-p (string &optional regexp-flag)
107 "Return t if there are no upper case chars in STRING.
108 If REGEXP-FLAG is non-nil, disregard letters preceded by `\\' (but not `\\\\')
109 since they have special meaning in a regexp."
110 (let ((case-fold-search nil))
111 (not (string-match (if regexp-flag
112 "\\(^\\|\\\\\\\\\\|[^\\]\\)[A-Z]"
117 (defmacro with-search-caps-disable-folding (string regexp-flag &rest body) "\
118 Eval BODY with `case-fold-search' let to nil if `search-caps-disable-folding'
119 is non-nil, and if STRING (either a string or a regular expression according
120 to REGEXP-FLAG) contains uppercase letters."
121 `(let ((case-fold-search
122 (if (and case-fold-search search-caps-disable-folding)
123 (no-upper-case-p ,string ,regexp-flag)
126 (put 'with-search-caps-disable-folding 'lisp-indent-function 2)
127 (put 'with-search-caps-disable-folding 'edebug-form-spec
128 '(sexp sexp &rest form))
130 (defmacro with-interactive-search-caps-disable-folding (string regexp-flag
132 "Same as `with-search-caps-disable-folding', but only in the case of a
133 function called interactively."
134 `(let ((case-fold-search
135 (if (and (interactive-p)
136 case-fold-search search-caps-disable-folding)
137 (no-upper-case-p ,string ,regexp-flag)
140 (put 'with-interactive-search-caps-disable-folding 'lisp-indent-function 2)
141 (put 'with-interactive-search-caps-disable-folding 'edebug-form-spec
142 '(sexp sexp &rest form))
144 (defun newline (&optional n)
145 "Insert a newline, and move to left margin of the new line if it's blank.
146 The newline is marked with the text-property `hard'.
147 With optional arg N, insert that many newlines.
148 In Auto Fill mode, if no numeric arg, break the preceding line if it's long."
150 (barf-if-buffer-read-only nil (point))
151 ;; Inserting a newline at the end of a line produces better redisplay in
152 ;; try_window_id than inserting at the beginning of a line, and the textual
153 ;; result is the same. So, if we're at beginning of line, pretend to be at
154 ;; the end of the previous line.
155 ;; #### Does this have any relevance in XEmacs?
156 (let ((flag (and (not (bobp))
158 ;; Make sure the newline before point isn't intangible.
159 (not (get-char-property (1- (point)) 'intangible))
160 ;; Make sure the newline before point isn't read-only.
161 (not (get-char-property (1- (point)) 'read-only))
162 ;; Make sure the newline before point isn't invisible.
163 (not (get-char-property (1- (point)) 'invisible))
164 ;; This should probably also test for the previous char
165 ;; being the *last* character too.
166 (not (get-char-property (1- (point)) 'end-open))
167 ;; Make sure the newline before point has the same
168 ;; properties as the char before it (if any).
169 (< (or (previous-extent-change (point)) -2)
171 (was-page-start (and (bolp)
172 (looking-at page-delimiter)))
174 (if flag (backward-char 1))
175 ;; Call self-insert so that auto-fill, abbrev expansion etc. happens.
176 ;; Set last-command-char to tell self-insert what to insert.
177 (let ((last-command-char ?\n)
178 ;; Don't auto-fill if we have a numeric argument.
179 ;; Also not if flag is true (it would fill wrong line);
180 ;; there is no need to since we're at BOL.
181 (auto-fill-function (if (or n flag) nil auto-fill-function)))
183 (self-insert-command (prefix-numeric-value n))
184 ;; If we get an error in self-insert-command, put point at right place.
185 (if flag (forward-char 1))))
186 ;; If we did *not* get an error, cancel that forward-char.
187 (if flag (backward-char 1))
188 ;; Mark the newline(s) `hard'.
189 (if use-hard-newlines
190 (let* ((from (- (point) (if n (prefix-numeric-value n) 1)))
191 (sticky (get-text-property from 'end-open))) ; XEmacs
192 (put-text-property from (point) 'hard 't)
193 ;; If end-open is not "t", add 'hard to end-open list
194 (if (and (listp sticky) (not (memq 'hard sticky)))
195 (put-text-property from (point) 'end-open ; XEmacs
196 (cons 'hard sticky)))))
197 ;; If the newline leaves the previous line blank,
198 ;; and we have a left margin, delete that from the blank line.
201 (goto-char beforepos)
203 (and (looking-at "[ \t]$")
204 (> (current-left-margin) 0)
205 (delete-region (point) (progn (end-of-line) (point))))))
206 (if flag (forward-char 1))
207 ;; Indent the line after the newline, except in one case:
208 ;; when we added the newline at the beginning of a line
209 ;; which starts a page.
211 (move-to-left-margin nil t)))
214 (defun set-hard-newline-properties (from to)
215 (let ((sticky (get-text-property from 'rear-nonsticky)))
216 (put-text-property from to 'hard 't)
217 ;; If rear-nonsticky is not "t", add 'hard to rear-nonsticky list
218 (if (and (listp sticky) (not (memq 'hard sticky)))
219 (put-text-property from (point) 'rear-nonsticky
220 (cons 'hard sticky)))))
223 "Insert a newline and leave point before it.
224 If there is a fill prefix and/or a left-margin, insert them on the new line
225 if the line would have been blank.
226 With arg N, insert N newlines."
228 (let* ((do-fill-prefix (and fill-prefix (bolp)))
229 (do-left-margin (and (bolp) (> (current-left-margin) 0)))
235 (if do-left-margin (indent-to (current-left-margin)))
236 (if do-fill-prefix (insert fill-prefix))))
243 "Split current line, moving portion beyond point vertically down."
245 (skip-chars-forward " \t")
246 (let ((col (current-column))
252 (defun quoted-insert (arg)
253 "Read next input character and insert it.
254 This is useful for inserting control characters.
255 You may also type up to 3 octal digits, to insert a character with that code.
257 In overwrite mode, this function inserts the character anyway, and
258 does not handle octal digits specially. This means that if you use
259 overwrite as your normal editing mode, you can use this function to
260 insert characters when necessary.
262 In binary overwrite mode, this function does overwrite, and octal
263 digits are interpreted as a character code. This is supposed to make
264 this function useful in editing binary files."
266 (let ((char (if (or (not overwrite-mode)
267 (eq overwrite-mode 'overwrite-mode-binary))
269 ;; read-char obeys C-g, so we should protect. FSF
270 ;; doesn't have the protection here, but it's a bug in
272 (let ((inhibit-quit t))
275 (if (eq overwrite-mode 'overwrite-mode-binary)
279 (setq arg (1- arg)))))
281 (defun delete-indentation (&optional arg)
282 "Join this line to previous and fix up whitespace at join.
283 If there is a fill prefix, delete it from the beginning of this line.
284 With argument, join this line to following line."
287 (if arg (forward-line 1))
288 (if (eq (char-before (point)) ?\n)
290 (delete-region (point) (1- (point)))
291 ;; If the second line started with the fill prefix,
292 ;; delete the prefix.
294 (<= (+ (point) (length fill-prefix)) (point-max))
296 (buffer-substring (point)
297 (+ (point) (length fill-prefix)))))
298 (delete-region (point) (+ (point) (length fill-prefix))))
299 (fixup-whitespace))))
301 (defun fixup-whitespace ()
302 "Fixup white space between objects around point.
303 Leave one space or none, according to the context."
306 (delete-horizontal-space)
307 (if (or (looking-at "^\\|\\s)")
308 (save-excursion (backward-char 1)
309 (looking-at "$\\|\\s(\\|\\s'")))
313 (defun delete-horizontal-space ()
314 "Delete all spaces and tabs around point."
316 (skip-chars-backward " \t")
317 (delete-region (point) (progn (skip-chars-forward " \t") (point))))
319 (defun just-one-space ()
320 "Delete all spaces and tabs around point, leaving one space."
322 (if abbrev-mode ; XEmacs
324 (skip-chars-backward " \t")
325 (if (eq (char-after (point)) ? ) ; XEmacs
328 (delete-region (point) (progn (skip-chars-forward " \t") (point))))
330 (defun delete-blank-lines ()
331 "On blank line, delete all surrounding blank lines, leaving just one.
332 On isolated blank line, delete that one.
333 On nonblank line, delete any immediately following blank lines."
335 (let (thisblank singleblank)
338 (setq thisblank (looking-at "[ \t]*$"))
339 ;; Set singleblank if there is just one blank line here.
342 (not (looking-at "[ \t]*\n[ \t]*$"))
344 (progn (forward-line -1)
345 (not (looking-at "[ \t]*$")))))))
346 ;; Delete preceding blank lines, and this one too if it's the only one.
350 (if singleblank (forward-line 1))
351 (delete-region (point)
352 (if (re-search-backward "[^ \t\n]" nil t)
353 (progn (forward-line 1) (point))
355 ;; Delete following blank lines, unless the current line is blank
356 ;; and there are no following blank lines.
357 (if (not (and thisblank singleblank))
361 (delete-region (point)
362 (if (re-search-forward "[^ \t\n]" nil t)
363 (progn (beginning-of-line) (point))
365 ;; Handle the special case where point is followed by newline and eob.
366 ;; Delete the line, leaving point at eob.
367 (if (looking-at "^[ \t]*\n\\'")
368 (delete-region (point) (point-max)))))
370 (defun back-to-indentation ()
371 "Move point to the first non-whitespace character on this line."
374 (beginning-of-line 1)
375 (skip-chars-forward " \t"))
377 (defun newline-and-indent ()
378 "Insert a newline, then indent according to major mode.
379 Indentation is done using the value of `indent-line-function'.
380 In programming language modes, this is the same as TAB.
381 In some text modes, where TAB inserts a tab, this command indents to the
382 column specified by the function `current-left-margin'."
384 (delete-region (point) (progn (skip-chars-backward " \t") (point)))
386 (indent-according-to-mode))
388 (defun reindent-then-newline-and-indent ()
389 "Reindent current line, insert newline, then indent the new line.
390 Indentation of both lines is done according to the current major mode,
391 which means calling the current value of `indent-line-function'.
392 In programming language modes, this is the same as TAB.
393 In some text modes, where TAB inserts a tab, this indents to the
394 column specified by the function `current-left-margin'."
397 (delete-region (point) (progn (skip-chars-backward " \t") (point)))
398 (indent-according-to-mode))
400 (indent-according-to-mode))
402 ;; Internal subroutine of delete-char
403 (defun kill-forward-chars (arg)
404 (if (listp arg) (setq arg (car arg)))
405 (if (eq arg '-) (setq arg -1))
406 (kill-region (point) (+ (point) arg)))
408 ;; Internal subroutine of backward-delete-char
409 (defun kill-backward-chars (arg)
410 (if (listp arg) (setq arg (car arg)))
411 (if (eq arg '-) (setq arg -1))
412 (kill-region (point) (- (point) arg)))
414 (defun backward-delete-char-untabify (arg &optional killp)
415 "Delete characters backward, changing tabs into spaces.
416 Delete ARG chars, and kill (save in kill ring) if KILLP is non-nil.
417 Interactively, ARG is the prefix arg (default 1)
418 and KILLP is t if a prefix arg was specified."
419 (interactive "*p\nP")
422 (while (and (> count 0) (not (bobp)))
423 (if (eq (char-before (point)) ?\t) ; XEmacs
424 (let ((col (current-column)))
426 (setq col (- col (current-column)))
430 (setq count (1- count)))))
431 (delete-backward-char arg killp)
432 ;; XEmacs: In overwrite mode, back over columns while clearing them out,
433 ;; unless at end of line.
434 (and overwrite-mode (not (eolp))
435 (save-excursion (insert-char ?\ arg))))
437 (defcustom delete-key-deletes-forward t
438 "*If non-nil, the DEL key will erase one character forwards.
439 If nil, the DEL key will erase one character backwards."
441 :group 'editing-basics)
443 (defcustom backward-delete-function 'delete-backward-char
444 "*Function called to delete backwards on a delete keypress.
445 If `delete-key-deletes-forward' is nil, `backward-or-forward-delete-char'
446 calls this function to erase one character backwards. Default value
447 is `delete-backward-char', with `backward-delete-char-untabify' being a
448 popular alternate setting."
450 :group 'editing-basics)
453 (defsubst delete-forward-p ()
454 (and delete-key-deletes-forward
455 (or (not (eq (device-type) 'x))
456 (x-keysym-on-keyboard-sans-modifiers-p 'backspace))))
458 (defun backward-or-forward-delete-char (arg)
459 "Delete either one character backwards or one character forwards.
460 Controlled by the state of `delete-key-deletes-forward' and whether the
461 BackSpace keysym even exists on your keyboard. If you don't have a
462 BackSpace keysym, the delete key should always delete one character
465 (if (delete-forward-p)
467 (funcall backward-delete-function arg)))
469 (defun backward-or-forward-kill-word (arg)
470 "Delete either one word backwards or one word forwards.
471 Controlled by the state of `delete-key-deletes-forward' and whether the
472 BackSpace keysym even exists on your keyboard. If you don't have a
473 BackSpace keysym, the delete key should always delete one character
476 (if (delete-forward-p)
478 (backward-kill-word arg)))
480 (defun backward-or-forward-kill-sentence (arg)
481 "Delete either one sentence backwards or one sentence forwards.
482 Controlled by the state of `delete-key-deletes-forward' and whether the
483 BackSpace keysym even exists on your keyboard. If you don't have a
484 BackSpace keysym, the delete key should always delete one character
487 (if (delete-forward-p)
489 (backward-kill-sentence (prefix-numeric-value arg))))
491 (defun backward-or-forward-kill-sexp (arg)
492 "Delete either one sexpr backwards or one sexpr forwards.
493 Controlled by the state of `delete-key-deletes-forward' and whether the
494 BackSpace keysym even exists on your keyboard. If you don't have a
495 BackSpace keysym, the delete key should always delete one character
498 (if (delete-forward-p)
500 (backward-kill-sexp arg)))
502 (defun zap-to-char (arg char)
503 "Kill up to and including ARG'th occurrence of CHAR.
504 Goes backward if ARG is negative; error if CHAR not found."
505 (interactive "*p\ncZap to char: ")
506 (kill-region (point) (with-interactive-search-caps-disable-folding
507 (char-to-string char) nil
508 (search-forward (char-to-string char) nil nil arg)
511 (defun zap-up-to-char (arg char)
512 "Kill up to ARG'th occurrence of CHAR.
513 Goes backward if ARG is negative; error if CHAR not found."
514 (interactive "*p\ncZap up to char: ")
515 (kill-region (point) (with-interactive-search-caps-disable-folding
516 (char-to-string char) nil
517 (search-forward (char-to-string char) nil nil arg)
518 (goto-char (if (> arg 0) (1- (point)) (1+ (point))))
521 (defun beginning-of-buffer (&optional arg)
522 "Move point to the beginning of the buffer; leave mark at previous position.
523 With arg N, put point N/10 of the way from the beginning.
525 If the buffer is narrowed, this command uses the beginning and size
526 of the accessible part of the buffer.
528 The characters that are moved over may be added to the current selection
529 \(i.e. active region) if the Shift key is held down, a motion key is used
530 to invoke this command, and `shifted-motion-keys-select-region' is t; see
531 the documentation for this variable for more details.
533 Don't use this command in Lisp programs!
534 \(goto-char (point-min)) is faster and avoids clobbering the mark."
538 (let ((size (- (point-max) (point-min))))
542 ;; Avoid overflow for large buffer sizes!
543 (* (prefix-numeric-value arg)
545 (/ (+ 10 (* size (prefix-numeric-value arg))) 10)))
547 (if arg (forward-line 1)))
549 (defun end-of-buffer (&optional arg)
550 "Move point to the end of the buffer; leave mark at previous position.
551 With arg N, put point N/10 of the way from the end.
553 If the buffer is narrowed, this command uses the beginning and size
554 of the accessible part of the buffer.
556 The characters that are moved over may be added to the current selection
557 \(i.e. active region) if the Shift key is held down, a motion key is used
558 to invoke this command, and `shifted-motion-keys-select-region' is t; see
559 the documentation for this variable for more details.
561 Don't use this command in Lisp programs!
562 \(goto-char (point-max)) is faster and avoids clobbering the mark."
566 ;; XEmacs changes here.
567 (let ((scroll-to-end (not (pos-visible-in-window-p (point-max))))
568 (size (- (point-max) (point-min))))
572 ;; Avoid overflow for large buffer sizes!
573 (* (prefix-numeric-value arg)
575 (/ (* size (prefix-numeric-value arg)) 10)))
578 ;; If we went to a place in the middle of the buffer,
579 ;; adjust it to the beginning of a line.
583 ;; If the end of the buffer is not already on the screen,
584 ;; then scroll specially to put it near, but not at, the bottom.
587 ;; XEmacs (not in FSF)
588 (defun mark-beginning-of-buffer (&optional arg)
589 "Push a mark at the beginning of the buffer; leave point where it is.
590 With arg N, push mark N/10 of the way from the true beginning."
593 (if (> (buffer-size) 10000)
594 ;; Avoid overflow for large buffer sizes!
595 (* (prefix-numeric-value arg)
596 (/ (buffer-size) 10))
597 (/ (+ 10 (* (buffer-size) (prefix-numeric-value arg))) 10))
601 (define-function 'mark-bob 'mark-beginning-of-buffer)
603 ;; XEmacs (not in FSF)
604 (defun mark-end-of-buffer (&optional arg)
605 "Push a mark at the end of the buffer; leave point where it is.
606 With arg N, push mark N/10 of the way from the true end."
609 (- (1+ (buffer-size))
610 (if (> (buffer-size) 10000)
611 ;; Avoid overflow for large buffer sizes!
612 (* (prefix-numeric-value arg)
613 (/ (buffer-size) 10))
614 (/ (* (buffer-size) (prefix-numeric-value arg)) 10)))
618 (define-function 'mark-eob 'mark-end-of-buffer)
620 (defun mark-whole-buffer ()
621 "Put point at beginning and mark at end of buffer.
622 You probably should not use this function in Lisp programs;
623 it is usually a mistake for a Lisp function to use any subroutine
624 that uses or sets the mark."
627 (push-mark (point-max) nil t)
628 (goto-char (point-min)))
631 (defun eval-current-buffer (&optional printflag)
632 "Evaluate the current buffer as Lisp code.
633 Programs can pass argument PRINTFLAG which controls printing of output:
634 nil means discard it; anything else is stream for print."
636 (eval-buffer (current-buffer) printflag))
639 (defun count-words-buffer (&optional buffer)
640 "Print the number of words in BUFFER.
641 If called noninteractively, the value is returned rather than printed.
642 BUFFER defaults to the current buffer."
644 (let ((words (count-words-region (point-min) (point-max) buffer)))
645 (when (interactive-p)
646 (message "Buffer has %d words" words))
650 (defun count-words-region (start end &optional buffer)
651 "Print the number of words in region between START and END in BUFFER.
652 If called noninteractively, the value is returned rather than printed.
653 BUFFER defaults to the current buffer."
656 (set-buffer (or buffer (current-buffer)))
659 (while (< (point) end)
660 (when (forward-word 1)
662 (when (interactive-p)
663 (message "Region has %d words" words))
666 (defun count-lines-region (start end)
667 "Print number of lines and characters in the region."
670 (message "Region has %d lines, %d characters"
671 (count-lines start end) (- end start)))
674 (defun count-lines-buffer (&optional buffer)
675 "Print number of lines and characters in BUFFER."
677 (with-current-buffer (or buffer (current-buffer))
678 (let ((cnt (count-lines (point-min) (point-max))))
679 (message "Buffer has %d lines, %d characters"
680 cnt (- (point-max) (point-min)))
683 ;;; Modified by Bob Weiner, 8/24/95, to print narrowed line number also.
684 ;;; Expanded by Bob Weiner, BeOpen, on 02/12/1997
686 "Print the following variants of the line number of point:
687 Region line - displayed line within the active region
688 Collapsed line - includes only selectively displayed lines;
689 Buffer line - physical line in the buffer;
690 Narrowed line - line number from the start of the buffer narrowing."
693 (let ((opoint (point)) start)
696 (if (region-active-p)
697 (goto-char (region-beginning))
698 (goto-char (point-min)))
704 (let* ((buffer-line (1+ (count-lines 1 (point))))
705 (narrowed-p (or (/= start 1)
706 (/= (point-max) (1+ (buffer-size)))))
707 (narrowed-line (if narrowed-p (1+ (count-lines start (point)))))
708 (selective-line (if selective-display
709 (1+ (count-lines start (point) t))))
710 (region-line (if (region-active-p)
711 (1+ (count-lines start (point) selective-display)))))
713 (message "Region line %d; Buffer line %d"
714 region-line buffer-line))
715 ((and narrowed-p selective-line (/= selective-line narrowed-line))
716 ;; buffer narrowed and some lines selectively displayed
717 (message "Collapsed line %d; Buffer line %d; Narrowed line %d"
718 selective-line buffer-line narrowed-line))
721 (message "Buffer line %d; Narrowed line %d"
722 buffer-line narrowed-line))
723 ((and selective-line (/= selective-line buffer-line))
724 ;; some lines selectively displayed
725 (message "Collapsed line %d; Buffer line %d"
726 selective-line buffer-line))
728 ;; give a basic line count
729 (message "Line %d" buffer-line)))))))
730 (setq zmacs-region-stays t))
732 ;; new in XEmacs 21.2 (not in FSF).
733 (defun line-number (&optional pos respect-narrowing)
734 "Return the line number of POS (defaults to point).
735 If RESPECT-NARROWING is non-nil, then the narrowed line number is returned;
736 otherwise, the absolute line number is returned. The returned line can always
737 be given to `goto-line' to get back to the current line."
738 (if (and pos (/= pos (point)))
741 (line-number nil respect-narrowing))
742 (1+ (count-lines (if respect-narrowing (point-min) 1) (point-at-bol)))))
744 (defun count-lines (start end &optional ignore-invisible-lines-flag)
745 "Return number of lines between START and END.
746 This is usually the number of newlines between them,
747 but can be one more if START is not equal to END
748 and the greater of them is not at the start of a line.
750 With optional IGNORE-INVISIBLE-LINES-FLAG non-nil, lines collapsed with
751 selective-display are excluded from the line count.
753 NOTE: The expression to return the current line number is not obvious:
755 (1+ (count-lines 1 (point-at-bol)))
757 See also `line-number'."
760 (narrow-to-region start end)
761 (goto-char (point-min))
762 (if (and (not ignore-invisible-lines-flag) (eq selective-display t))
765 (while (re-search-forward "[\n\C-m]" nil t 40)
766 (setq done (+ 40 done)))
767 (while (re-search-forward "[\n\C-m]" nil t 1)
768 (setq done (+ 1 done)))
769 (goto-char (point-max))
770 (if (and (/= start end)
774 (- (buffer-size) (forward-line (buffer-size)))))))
776 (defun what-cursor-position ()
777 "Print info on cursor position (on screen and within buffer)."
780 (let* ((char (char-after (point))) ; XEmacs
784 (total (buffer-size))
785 (percent (if (> total 50000)
786 ;; Avoid overflow from multiplying by 100!
787 (/ (+ (/ total 200) (1- pos)) (max (/ total 100) 1))
788 (/ (+ (/ total 2) (* 100 (1- pos))) (max total 1))))
789 (hscroll (if (= (window-hscroll) 0)
791 (format " Hscroll=%d" (window-hscroll))))
792 (col (+ (current-column) (if column-number-start-at-one 1 0))))
794 (if (or (/= beg 1) (/= end (1+ total)))
795 (message "point=%d of %d(%d%%) <%d - %d> column %d %s"
796 pos total percent beg end col hscroll)
797 (message "point=%d of %d(%d%%) column %d %s"
798 pos total percent col hscroll))
799 ;; XEmacs: don't use single-key-description
800 (if (or (/= beg 1) (/= end (1+ total)))
801 (message "Char: %s (0%o, %d, 0x%x) point=%d of %d(%d%%) <%d - %d> column %d %s"
802 (text-char-description char) char char char pos total
803 percent beg end col hscroll)
804 (message "Char: %s (0%o, %d, 0x%x) point=%d of %d(%d%%) column %d %s"
805 (text-char-description char) char char char pos total
806 percent col hscroll)))))
808 (defun fundamental-mode ()
809 "Major mode not specialized for anything in particular.
810 Other major modes are defined by comparison with this one."
812 (kill-all-local-variables))
814 ;; XEmacs the following are declared elsewhere
815 ;(defvar read-expression-map (cons 'keymap minibuffer-local-map)
816 ; "Minibuffer keymap used for reading Lisp expressions.")
817 ;(define-key read-expression-map "\M-\t" 'lisp-complete-symbol)
819 ;(put 'eval-expression 'disabled t)
821 ;(defvar read-expression-history nil)
823 ;; We define this, rather than making `eval' interactive,
824 ;; for the sake of completion of names like eval-region, eval-current-buffer.
825 (defun eval-expression (expression &optional eval-expression-insert-value)
826 "Evaluate EXPRESSION and print value in minibuffer.
827 Value is also consed on to front of the variable `values'.
828 With prefix argument, insert the result to the current buffer."
829 ;(interactive "xEval: ")
831 (list (read-from-minibuffer "Eval: "
832 nil read-expression-map t
833 'read-expression-history)
835 (setq values (cons (eval expression) values))
837 (if eval-expression-insert-value (current-buffer) t)))
839 ;; XEmacs -- extra parameter (variant, but equivalent logic)
840 (defun edit-and-eval-command (prompt form &optional history)
841 "Prompting with PROMPT, let user edit FORM and eval result.
842 FORM is a Lisp expression. Let user edit that expression in
843 the minibuffer, then read and evaluate the result."
844 (let ((form (read-expression prompt
845 ;; first try to format the thing readably;
846 ;; and if that fails, print it normally.
848 (let ((print-readably t))
849 (prin1-to-string form))
850 (error (prin1-to-string form)))
851 (or history '(command-history . 1)))))
852 (or history (setq history 'command-history))
854 (setq history (car history)))
857 ;; If form was added to the history as a string,
858 ;; get rid of that. We want only evallable expressions there.
859 (if (stringp (car (symbol-value history)))
860 (set history (cdr (symbol-value history))))
862 ;; If form to be redone does not match front of history,
863 ;; add it to the history.
864 (or (equal form (car (symbol-value history)))
865 (set history (cons form (symbol-value history)))))
868 (defun repeat-complex-command (arg)
869 "Edit and re-evaluate last complex command, or ARGth from last.
870 A complex command is one which used the minibuffer.
871 The command is placed in the minibuffer as a Lisp form for editing.
872 The result is executed, repeating the command as changed.
873 If the command has been changed or is not the most recent previous command
874 it is added to the front of the command history.
875 You can use the minibuffer history commands \\<minibuffer-local-map>\\[next-history-element] and \\[previous-history-element]
876 to get different commands to edit and resubmit."
878 ;; XEmacs: It looks like our version is better -sb
879 (let ((print-level nil))
880 (edit-and-eval-command "Redo: "
881 (or (nth (1- arg) command-history)
883 (cons 'command-history arg))))
885 ;; XEmacs: Functions moved to minibuf.el
886 ;; previous-matching-history-element
887 ;; next-matching-history-element
888 ;; next-history-element
889 ;; previous-history-element
890 ;; next-complete-history-element
891 ;; previous-complete-history-element
893 (defun goto-line (line)
894 "Goto line LINE, counting from line 1 at beginning of buffer."
895 (interactive "NGoto line: ")
896 (setq line (prefix-numeric-value line))
900 (if (eq selective-display t)
901 (re-search-forward "[\n\C-m]" nil 'end (1- line))
902 (forward-line (1- line)))))
904 ;Put this on C-x u, so we can force that rather than C-_ into startup msg
905 (define-function 'advertised-undo 'undo)
907 (defun undo (&optional count)
908 "Undo some previous changes.
909 Repeat this command to undo more changes.
910 A numeric argument serves as a repeat count."
912 ;; If we don't get all the way through, make last-command indicate that
913 ;; for the following command.
914 (setq this-command t)
915 (let ((modified (buffer-modified-p))
916 (recent-save (recent-auto-save-p)))
917 (or (eq (selected-window) (minibuffer-window))
918 (display-message 'command "Undo!"))
919 (or (and (eq last-command 'undo)
920 (eq (current-buffer) last-undo-buffer)) ; XEmacs
923 (undo-more (or count 1))
924 ;; Don't specify a position in the undo record for the undo command.
925 ;; Instead, undoing this should move point to where the change is.
926 (let ((tail buffer-undo-list)
928 (while (and tail (not done) (not (null (car tail))))
929 (if (integerp (car tail))
932 (setq buffer-undo-list (delq (car tail) buffer-undo-list))))
933 (setq tail (cdr tail))))
934 (and modified (not (buffer-modified-p))
935 (delete-auto-save-file-if-necessary recent-save)))
936 ;; If we do get all the way through, make this-command indicate that.
937 (setq this-command 'undo))
939 (defvar pending-undo-list nil
940 "Within a run of consecutive undo commands, list remaining to be undone.")
942 (defvar last-undo-buffer nil) ; XEmacs
945 "Set `pending-undo-list' to the front of the undo list.
946 The next call to `undo-more' will undo the most recently made change."
947 (if (eq buffer-undo-list t)
948 (error "No undo information in this buffer"))
949 (setq pending-undo-list buffer-undo-list))
951 (defun undo-more (count)
952 "Undo back N undo-boundaries beyond what was already undone recently.
953 Call `undo-start' to get ready to undo recent changes,
954 then call `undo-more' one or more times to undo them."
955 (or pending-undo-list
956 (error "No further undo information"))
957 (setq pending-undo-list (primitive-undo count pending-undo-list)
958 last-undo-buffer (current-buffer))) ; XEmacs
961 (defun call-with-transparent-undo (fn &rest args)
962 "Apply FN to ARGS, and then undo all changes made by FN to the current
963 buffer. The undo records are processed even if FN returns non-locally.
964 There is no trace of the changes made by FN in the buffer's undo history.
966 You can use this in a write-file-hooks function with continue-save-buffer
967 to make the contents of a disk file differ from its in-memory buffer."
968 (let ((buffer-undo-list nil)
969 ;; Kludge to prevent undo list truncation:
970 (undo-high-threshold -1)
972 (obuffer (current-buffer)))
975 ;; Go to the buffer we will restore and make it writable:
978 (let ((buffer-read-only nil))
981 ;; Perform all undos, with further undo logging disabled:
982 (let ((tail buffer-undo-list))
983 (setq buffer-undo-list t)
985 (setq tail (primitive-undo (length tail) tail))))))))))
987 ;; XEmacs: The following are in other files
988 ;; shell-command-history
989 ;; shell-command-switch
991 ;; shell-command-sentinel
994 (defconst universal-argument-map
995 (let ((map (make-sparse-keymap)))
996 (set-keymap-default-binding map 'universal-argument-other-key)
997 ;FSFmacs (define-key map [switch-frame] nil)
998 (define-key map [(t)] 'universal-argument-other-key)
999 (define-key map [(meta t)] 'universal-argument-other-key)
1000 (define-key map [(control u)] 'universal-argument-more)
1001 (define-key map [?-] 'universal-argument-minus)
1002 (define-key map [?0] 'digit-argument)
1003 (define-key map [?1] 'digit-argument)
1004 (define-key map [?2] 'digit-argument)
1005 (define-key map [?3] 'digit-argument)
1006 (define-key map [?4] 'digit-argument)
1007 (define-key map [?5] 'digit-argument)
1008 (define-key map [?6] 'digit-argument)
1009 (define-key map [?7] 'digit-argument)
1010 (define-key map [?8] 'digit-argument)
1011 (define-key map [?9] 'digit-argument)
1013 "Keymap used while processing \\[universal-argument].")
1015 (defvar universal-argument-num-events nil
1016 "Number of argument-specifying events read by `universal-argument'.
1017 `universal-argument-other-key' uses this to discard those events
1018 from (this-command-keys), and reread only the final command.")
1020 (defun universal-argument ()
1021 "Begin a numeric argument for the following command.
1022 Digits or minus sign following \\[universal-argument] make up the numeric argument.
1023 \\[universal-argument] following the digits or minus sign ends the argument.
1024 \\[universal-argument] without digits or minus sign provides 4 as argument.
1025 Repeating \\[universal-argument] without digits or minus sign
1026 multiplies the argument by 4 each time."
1028 (setq prefix-arg (list 4))
1029 (setq zmacs-region-stays t) ; XEmacs
1030 (setq universal-argument-num-events (length (this-command-keys)))
1031 (setq overriding-terminal-local-map universal-argument-map))
1033 ;; A subsequent C-u means to multiply the factor by 4 if we've typed
1034 ;; nothing but C-u's; otherwise it means to terminate the prefix arg.
1035 (defun universal-argument-more (arg)
1036 (interactive "_P") ; XEmacs
1038 (setq prefix-arg (list (* 4 (car arg))))
1039 (setq prefix-arg arg)
1040 (setq overriding-terminal-local-map nil))
1041 (setq universal-argument-num-events (length (this-command-keys))))
1043 (defun negative-argument (arg)
1044 "Begin a negative numeric argument for the next command.
1045 \\[universal-argument] following digits or minus sign ends the argument."
1046 (interactive "_P") ; XEmacs
1047 (cond ((integerp arg)
1048 (setq prefix-arg (- arg)))
1050 (setq prefix-arg nil))
1052 (setq prefix-arg '-)))
1053 (setq universal-argument-num-events (length (this-command-keys)))
1054 (setq overriding-terminal-local-map universal-argument-map))
1056 ;; XEmacs: This function not synched with FSF
1057 (defun digit-argument (arg)
1058 "Part of the numeric argument for the next command.
1059 \\[universal-argument] following digits or minus sign ends the argument."
1060 (interactive "_P") ; XEmacs
1061 (let* ((event last-command-event)
1062 (key (and (key-press-event-p event)
1064 (digit (and key (characterp key) (>= key ?0) (<= key ?9)
1067 (universal-argument-other-key arg)
1068 (cond ((integerp arg)
1069 (setq prefix-arg (+ (* arg 10)
1070 (if (< arg 0) (- digit) digit))))
1072 ;; Treat -0 as just -, so that -01 will work.
1073 (setq prefix-arg (if (zerop digit) '- (- digit))))
1075 (setq prefix-arg digit)))
1076 (setq universal-argument-num-events (length (this-command-keys)))
1077 (setq overriding-terminal-local-map universal-argument-map))))
1079 ;; For backward compatibility, minus with no modifiers is an ordinary
1080 ;; command if digits have already been entered.
1081 (defun universal-argument-minus (arg)
1082 (interactive "_P") ; XEmacs
1084 (universal-argument-other-key arg)
1085 (negative-argument arg)))
1087 ;; Anything else terminates the argument and is left in the queue to be
1088 ;; executed as a command.
1089 (defun universal-argument-other-key (arg)
1090 (interactive "_P") ; XEmacs
1091 (setq prefix-arg arg)
1092 (let* ((key (this-command-keys))
1093 ;; FSF calls silly function `listify-key-sequence' here.
1094 (keylist (append key nil)))
1095 (setq unread-command-events
1096 (append (nthcdr universal-argument-num-events keylist)
1097 unread-command-events)))
1098 (reset-this-command-lengths)
1099 (setq overriding-terminal-local-map nil))
1102 ;; XEmacs -- keep zmacs-region active.
1103 (defun forward-to-indentation (count)
1104 "Move forward COUNT lines and position at first nonblank character."
1106 (forward-line count)
1107 (skip-chars-forward " \t"))
1109 (defun backward-to-indentation (count)
1110 "Move backward COUNT lines and position at first nonblank character."
1112 (forward-line (- count))
1113 (skip-chars-forward " \t"))
1115 (defcustom kill-whole-line nil
1116 "*If non-nil, kill the whole line if point is at the beginning.
1117 Otherwise, `kill-line' kills only up to the end of the line, but not
1118 the terminating newline. Note: This only applies when `kill-line' is
1119 called interactively.
1121 WARNING: This is a misnamed variable! It should be called something
1122 like `kill-whole-line-when-at-beginning'. If you simply want
1123 \\[kill-line] to kill the entire current line, bind it to the function
1124 `kill-entire-line'. "
1128 (defun kill-line-1 (arg entire-line interactive-p)
1129 (kill-region (if entire-line
1134 ;; Don't shift point before doing the delete; that way,
1135 ;; undo will record the right position of point.
1137 ; ;; It is better to move point to the other end of the kill
1138 ; ;; before killing. That way, in a read-only buffer, point
1139 ; ;; moves across the text that is copied to the kill ring.
1140 ; ;; The choice has no effect on undo now that undo records
1141 ; ;; the value of point from before the command was run.
1145 (forward-line (prefix-numeric-value arg))
1147 (signal 'end-of-buffer nil))
1148 (if (or (looking-at "[ \t]*$")
1151 (and kill-whole-line (bolp)))))
1156 (defun kill-entire-line (&optional arg)
1157 "Kill the entire line.
1158 With prefix argument, kill that many lines from point. Negative
1159 arguments kill lines backward.
1161 When calling from a program, nil means \"no arg\",
1162 a number counts as a prefix arg."
1164 (kill-line-1 arg t (interactive-p)))
1166 (defun kill-line (&optional arg)
1167 "Kill the rest of the current line, or the entire line.
1168 If no nonblanks there, kill thru newline. If called interactively,
1169 may kill the entire line when given no argument at the beginning of a
1170 line; see `kill-whole-line'. With prefix argument, kill that many
1171 lines from point. Negative arguments kill lines backward.
1173 WARNING: This is a misnamed function! It should be called something
1174 like `kill-to-end-of-line'. If you simply want to kill the entire
1175 current line, use `kill-entire-line'.
1177 When calling from a program, nil means \"no arg\",
1178 a number counts as a prefix arg."
1180 (kill-line-1 arg nil (interactive-p)))
1183 (defun backward-kill-line nil
1184 "Kill back to the beginning of the line."
1186 (let ((point (point)))
1187 (beginning-of-line nil)
1188 (kill-region (point) point)))
1191 ;;;; Window system cut and paste hooks.
1193 ;;; I think that kill-hooks is a better name and more general mechanism
1194 ;;; than interprogram-cut-function (from FSFmacs). I don't like the behavior
1195 ;;; of interprogram-paste-function: ^Y should always come from the kill ring,
1196 ;;; not the X selection. But if that were provided, it should be called (and
1197 ;;; behave as) yank-hooks instead. -- jwz
1199 ;; [... code snipped ...]
1201 (defcustom kill-hooks nil
1202 "*Functions run when something is added to the XEmacs kill ring.
1203 These functions are called with one argument, the string most recently
1204 cut or copied. You can use this to, for example, make the most recent
1205 kill become the X Clipboard selection."
1209 ;;; `kill-hooks' seems not sufficient because
1210 ;;; `interprogram-cut-function' requires more variable about to rotate
1211 ;;; the cut buffers. I'm afraid to change interface of `kill-hooks',
1212 ;;; so I add it. (1997-11-03 by MORIOKA Tomohiko)
1214 (defcustom interprogram-cut-function 'own-clipboard
1215 "Function to call to make a killed region available to other programs.
1217 Most window systems provide some sort of facility for cutting and
1218 pasting text between the windows of different programs.
1219 This variable holds a function that Emacs calls whenever text
1220 is put in the kill ring, to make the new kill available to other
1223 The function takes one or two arguments.
1224 The first argument, TEXT, is a string containing
1225 the text which should be made available.
1226 The second, PUSH, if non-nil means this is a \"new\" kill;
1227 nil means appending to an \"old\" kill."
1228 :type '(radio (function-item :tag "Send to Clipboard"
1231 (const :tag "None" nil)
1232 (function :tag "Other"))
1235 (defcustom interprogram-paste-function 'get-clipboard
1236 "Function to call to get text cut from other programs.
1238 Most window systems provide some sort of facility for cutting and
1239 pasting text between the windows of different programs.
1240 This variable holds a function that Emacs calls to obtain
1241 text that other programs have provided for pasting.
1243 The function should be called with no arguments. If the function
1244 returns nil, then no other program has provided such text, and the top
1245 of the Emacs kill ring should be used. If the function returns a
1246 string, that string should be put in the kill ring as the latest kill.
1248 Note that the function should return a string only if a program other
1249 than Emacs has provided a string for pasting; if Emacs provided the
1250 most recent string, the function should return nil. If it is
1251 difficult to tell whether Emacs or some other program provided the
1252 current string, it is probably good enough to return nil if the string
1253 is equal (according to `string=') to the last text Emacs provided."
1254 :type '(radio (function-item :tag "Get from Clipboard"
1257 (const :tag "None" nil)
1258 (function :tag "Other"))
1262 ;;;; The kill ring data structure.
1264 (defvar kill-ring nil
1265 "List of killed text sequences.
1266 Since the kill ring is supposed to interact nicely with cut-and-paste
1267 facilities offered by window systems, use of this variable should
1268 interact nicely with `interprogram-cut-function' and
1269 `interprogram-paste-function'. The functions `kill-new',
1270 `kill-append', and `current-kill' are supposed to implement this
1271 interaction; you may want to use them instead of manipulating the kill
1274 (defcustom kill-ring-max 30
1275 "*Maximum length of kill ring before oldest elements are thrown away."
1279 (defvar kill-ring-yank-pointer nil
1280 "The tail of the kill ring whose car is the last thing yanked.")
1282 (defun kill-new (string &optional replace)
1283 "Make STRING the latest kill in the kill ring.
1284 Set `kill-ring-yank-pointer' to point to it.
1286 Optional second argument REPLACE non-nil means that STRING will replace
1287 the front of the kill ring, rather than being added to the list."
1288 ; (and (fboundp 'menu-bar-update-yank-menu)
1289 ; (menu-bar-update-yank-menu string (and replace (car kill-ring))))
1291 (setcar kill-ring string)
1292 (setq kill-ring (cons string kill-ring))
1293 (if (> (length kill-ring) kill-ring-max)
1294 (setcdr (nthcdr (1- kill-ring-max) kill-ring) nil)))
1295 (setq kill-ring-yank-pointer kill-ring)
1296 (if interprogram-cut-function
1297 (funcall interprogram-cut-function string (not replace)))
1298 (run-hook-with-args 'kill-hooks string))
1300 (defun kill-append (string before-p)
1301 "Append STRING to the end of the latest kill in the kill ring.
1302 If BEFORE-P is non-nil, prepend STRING to the kill.
1304 (kill-new (if before-p
1305 (concat string (car kill-ring))
1306 (concat (car kill-ring) string)) t))
1308 (defun current-kill (n &optional do-not-move)
1309 "Rotate the yanking point by N places, and then return that kill.
1310 If N is zero, `interprogram-paste-function' is set, and calling it
1311 returns a string, then that string is added to the front of the
1312 kill ring and returned as the latest kill.
1313 If optional arg DO-NOT-MOVE is non-nil, then don't actually move the
1314 yanking point\; just return the Nth kill forward."
1315 (let ((interprogram-paste (and (= n 0)
1316 interprogram-paste-function
1317 (funcall interprogram-paste-function))))
1318 (if interprogram-paste
1320 ;; Disable the interprogram cut function when we add the new
1321 ;; text to the kill ring, so Emacs doesn't try to own the
1322 ;; selection, with identical text.
1323 (let ((interprogram-cut-function nil))
1324 (kill-new interprogram-paste))
1326 (or kill-ring (error "Kill ring is empty"))
1327 (let* ((tem (nthcdr (mod (- n (length kill-ring-yank-pointer))
1331 (setq kill-ring-yank-pointer tem))
1336 ;;;; Commands for manipulating the kill ring.
1338 ;; In FSF killing read-only text just pastes it into kill-ring. Which
1339 ;; is a very bad idea -- see Jamie's comment below.
1341 ;(defvar kill-read-only-ok nil
1342 ; "*Non-nil means don't signal an error for killing read-only text.")
1344 (defun kill-region (start end &optional verbose) ; verbose is XEmacs addition
1345 "Kill between point and mark.
1346 The text is deleted but saved in the kill ring.
1347 The command \\[yank] can retrieve it from there.
1348 \(If you want to kill and then yank immediately, use \\[copy-region-as-kill].)
1350 This is the primitive for programs to kill text (as opposed to deleting it).
1351 Supply two arguments, character numbers indicating the stretch of text
1353 Any command that calls this function is a \"kill command\".
1354 If the previous command was also a kill command,
1355 the text killed this time appends to the text killed last time
1356 to make one entry in the kill ring."
1357 (interactive "*r\np")
1359 ; (let ((region-hack (and zmacs-regions (eq last-command 'yank))))
1360 ; ;; This lets "^Y^W" work. I think this is dumb, but zwei did it.
1361 ; (if region-hack (zmacs-activate-region))
1363 ; (list (point) (mark) current-prefix-arg)
1364 ; (if region-hack (zmacs-deactivate-region)))))
1365 ;; start and end can be markers but the rest of this function is
1366 ;; written as if they are only integers
1367 (if (markerp start) (setq start (marker-position start)))
1368 (if (markerp end) (setq end (marker-position end)))
1369 (or (and start end) (if zmacs-regions ;; rewritten for I18N3 snarfing
1370 (error "The region is not active now")
1371 (error "The mark is not set now")))
1372 (if verbose (if buffer-read-only
1373 (lmessage 'command "Copying %d characters"
1374 (- (max start end) (min start end)))
1375 (lmessage 'command "Killing %d characters"
1376 (- (max start end) (min start end)))))
1379 ;; I don't like this large change in behavior -- jwz
1380 ;; Read-Only text means it shouldn't be deleted, so I'm restoring
1381 ;; this code, but only for text-properties and not full extents. -sb
1382 ;; If the buffer is read-only, we should beep, in case the person
1383 ;; just isn't aware of this. However, there's no harm in putting
1384 ;; the region's text in the kill ring, anyway.
1385 ((or (and buffer-read-only (not inhibit-read-only))
1386 (text-property-not-all (min start end) (max start end) 'read-only nil))
1387 ;; This is redundant.
1388 ;; (if verbose (message "Copying %d characters"
1389 ;; (- (max start end) (min start end))))
1390 (copy-region-as-kill start end)
1391 ;; ;; This should always barf, and give us the correct error.
1392 ;; (if kill-read-only-ok
1393 ;; (message "Read only text copied to kill ring")
1394 (setq this-command 'kill-region)
1395 (barf-if-buffer-read-only)
1396 (signal 'buffer-read-only (list (current-buffer))))
1398 ;; In certain cases, we can arrange for the undo list and the kill
1399 ;; ring to share the same string object. This code does that.
1400 ((not (or (eq buffer-undo-list t)
1401 (eq last-command 'kill-region)
1402 ;; Use = since positions may be numbers or markers.
1404 ;; Don't let the undo list be truncated before we can even access it.
1405 ;; FSF calls this `undo-strong-limit'
1406 (let ((undo-high-threshold (+ (- end start) 100))
1407 ;(old-list buffer-undo-list)
1409 (delete-region start end)
1410 ;; Search back in buffer-undo-list for this string,
1411 ;; in case a change hook made property changes.
1412 (setq tail buffer-undo-list)
1414 (not (stringp (car-safe (car-safe tail))))) ; XEmacs
1416 ;; Take the same string recorded for undo
1417 ;; and put it in the kill-ring.
1419 (kill-new (car (car tail))))))
1422 ;; if undo is not kept, grab the string then delete it (which won't
1423 ;; add another string to the undo list).
1424 (copy-region-as-kill start end)
1425 (delete-region start end)))
1426 (setq this-command 'kill-region))
1428 ;; copy-region-as-kill no longer sets this-command, because it's confusing
1429 ;; to get two copies of the text when the user accidentally types M-w and
1430 ;; then corrects it with the intended C-w.
1431 (defun copy-region-as-kill (start end)
1432 "Save the region as if killed, but don't kill it.
1435 (if (eq last-command 'kill-region)
1436 (kill-append (buffer-substring start end) (< end start))
1437 (kill-new (buffer-substring start end)))
1440 (defun kill-ring-save (start end)
1441 "Save the region as if killed, but don't kill it.
1442 This command is similar to `copy-region-as-kill', except that it gives
1443 visual feedback indicating the extent of the region being copied."
1445 (copy-region-as-kill start end)
1446 ;; copy before delay, for xclipboard's benefit
1448 (let ((other-end (if (= (point) start) end start))
1450 ;; Inhibit quitting so we can make a quit here
1451 ;; look like a C-g typed as a command.
1453 (if (pos-visible-in-window-p other-end (selected-window))
1455 ;; FSF (I'm not sure what this does -sb)
1456 ; ;; Swap point and mark.
1457 ; (set-marker (mark-marker) (point) (current-buffer))
1458 (goto-char other-end)
1461 ; (set-marker (mark-marker) other-end (current-buffer))
1463 ;; If user quit, deactivate the mark
1464 ;; as C-g would as a command.
1465 (and quit-flag (mark)
1466 (zmacs-deactivate-region)))
1467 ;; too noisy. -- jwz
1468 ; (let* ((killed-text (current-kill 0))
1469 ; (message-len (min (length killed-text) 40)))
1470 ; (if (= (point) start)
1471 ; ;; Don't say "killed"; that is misleading.
1472 ; (message "Saved text until \"%s\""
1473 ; (substring killed-text (- message-len)))
1474 ; (message "Saved text from \"%s\""
1475 ; (substring killed-text 0 message-len))))
1478 (defun append-next-kill ()
1479 "Cause following command, if it kills, to append to previous kill."
1484 (setq this-command 'kill-region)
1485 (display-message 'command
1486 "If the next command is a kill, it will append"))
1487 (setq last-command 'kill-region)))
1489 (defun yank-pop (arg)
1490 "Replace just-yanked stretch of killed text with a different stretch.
1491 This command is allowed only immediately after a `yank' or a `yank-pop'.
1492 At such a time, the region contains a stretch of reinserted
1493 previously-killed text. `yank-pop' deletes that text and inserts in its
1494 place a different stretch of killed text.
1496 With no argument, the previous kill is inserted.
1497 With argument N, insert the Nth previous kill.
1498 If N is negative, this is a more recent kill.
1500 The sequence of kills wraps around, so that after the oldest one
1501 comes the newest one."
1503 (if (not (eq last-command 'yank))
1504 (error "Previous command was not a yank"))
1505 (setq this-command 'yank)
1506 (let ((inhibit-read-only t)
1507 (before (< (point) (mark t))))
1508 (delete-region (point) (mark t))
1509 ;;(set-marker (mark-marker) (point) (current-buffer))
1511 (insert (current-kill arg))
1513 ;; This is like exchange-point-and-mark, but doesn't activate the mark.
1514 ;; It is cleaner to avoid activation, even though the command
1515 ;; loop would deactivate the mark because we inserted text.
1516 (goto-char (prog1 (mark t)
1517 (set-marker (mark-marker t) (point) (current-buffer))))))
1521 (defun yank (&optional arg)
1522 "Reinsert the last stretch of killed text.
1523 More precisely, reinsert the stretch of killed text most recently
1524 killed OR yanked. Put point at end, and set mark at beginning.
1525 With just C-u as argument, same but put point at beginning (and mark at end).
1526 With argument N, reinsert the Nth most recently killed stretch of killed
1528 See also the command \\[yank-pop]."
1530 ;; If we don't get all the way through, make last-command indicate that
1531 ;; for the following command.
1532 (setq this-command t)
1534 (insert (current-kill (cond
1539 ;; This is like exchange-point-and-mark, but doesn't activate the mark.
1540 ;; It is cleaner to avoid activation, even though the command
1541 ;; loop would deactivate the mark because we inserted text.
1542 ;; (But it's an unnecessary kludge in XEmacs.)
1543 ;(goto-char (prog1 (mark t)
1544 ;(set-marker (mark-marker) (point) (current-buffer)))))
1545 (exchange-point-and-mark t))
1546 ;; If we do get all the way thru, make this-command indicate that.
1547 (setq this-command 'yank)
1550 (defun rotate-yank-pointer (arg)
1551 "Rotate the yanking point in the kill ring.
1552 With argument, rotate that many kills forward (or backward, if negative)."
1557 (defun insert-buffer (buffer)
1558 "Insert after point the contents of BUFFER.
1559 Puts mark after the inserted text.
1560 BUFFER may be a buffer or a buffer name."
1564 (barf-if-buffer-read-only)
1565 (read-buffer "Insert buffer: "
1566 ;; XEmacs: we have different args
1567 (other-buffer (current-buffer) nil t)
1569 (or (bufferp buffer)
1570 (setq buffer (get-buffer buffer)))
1571 (let (start end newmark)
1575 (setq start (point-min) end (point-max)))
1576 (insert-buffer-substring buffer start end)
1577 (setq newmark (point)))
1578 (push-mark newmark))
1581 (defun append-to-buffer (buffer start end)
1582 "Append to specified buffer the text of the region.
1583 It is inserted into that buffer before its point.
1585 When calling from a program, give three arguments:
1586 BUFFER (or buffer name), START and END.
1587 START and END specify the portion of the current buffer to be copied."
1589 ;; XEmacs: we have different args to other-buffer
1590 (list (read-buffer "Append to buffer: " (other-buffer (current-buffer)
1592 (region-beginning) (region-end)))
1593 (let ((oldbuf (current-buffer)))
1595 (set-buffer (get-buffer-create buffer))
1596 (insert-buffer-substring oldbuf start end))))
1598 (defun prepend-to-buffer (buffer start end)
1599 "Prepend to specified buffer the text of the region.
1600 It is inserted into that buffer after its point.
1602 When calling from a program, give three arguments:
1603 BUFFER (or buffer name), START and END.
1604 START and END specify the portion of the current buffer to be copied."
1605 (interactive "BPrepend to buffer: \nr")
1606 (let ((oldbuf (current-buffer)))
1608 (set-buffer (get-buffer-create buffer))
1610 (insert-buffer-substring oldbuf start end)))))
1612 (defun copy-to-buffer (buffer start end)
1613 "Copy to specified buffer the text of the region.
1614 It is inserted into that buffer, replacing existing text there.
1616 When calling from a program, give three arguments:
1617 BUFFER (or buffer name), START and END.
1618 START and END specify the portion of the current buffer to be copied."
1619 (interactive "BCopy to buffer: \nr")
1620 (let ((oldbuf (current-buffer)))
1622 (set-buffer (get-buffer-create buffer))
1625 (insert-buffer-substring oldbuf start end)))))
1628 ;(put 'mark-inactive 'error-conditions '(mark-inactive error))
1629 ;(put 'mark-inactive 'error-message "The mark is not active now")
1631 (defun mark (&optional force buffer)
1632 "Return this buffer's mark value as integer, or nil if no mark.
1634 If `zmacs-regions' is true, then this returns nil unless the region is
1635 currently in the active (highlighted) state. With an argument of t, this
1636 returns the mark (if there is one) regardless of the active-region state.
1637 You should *generally* not use the mark unless the region is active, if
1638 the user has expressed a preference for the active-region model.
1640 If you are using this in an editing command, you are most likely making
1641 a mistake; see the documentation of `set-mark'."
1642 (setq buffer (decode-buffer buffer))
1644 ; (if (or force (not transient-mark-mode) mark-active mark-even-if-inactive)
1645 ; (marker-position (mark-marker))
1646 ; (signal 'mark-inactive nil)))
1647 (let ((m (mark-marker force buffer)))
1648 (and m (marker-position m))))
1651 ;;; Many places set mark-active directly, and several of them failed to also
1652 ;;; run deactivate-mark-hook. This shorthand should simplify.
1653 ;(defsubst deactivate-mark ()
1654 ; "Deactivate the mark by setting `mark-active' to nil.
1655 ;\(That makes a difference only in Transient Mark mode.)
1656 ;Also runs the hook `deactivate-mark-hook'."
1657 ; (if transient-mark-mode
1659 ; (setq mark-active nil)
1660 ; (run-hooks 'deactivate-mark-hook))))
1662 (defun set-mark (pos &optional buffer)
1663 "Set this buffer's mark to POS. Don't use this function!
1664 That is to say, don't use this function unless you want
1665 the user to see that the mark has moved, and you want the previous
1666 mark position to be lost.
1668 Normally, when a new mark is set, the old one should go on the stack.
1669 This is why most applications should use `push-mark', not `set-mark'.
1671 Novice Emacs Lisp programmers often try to use the mark for the wrong
1672 purposes. The mark saves a location for the user's convenience.
1673 Most editing commands should not alter the mark.
1674 To remember a location for internal use in the Lisp program,
1675 store it in a Lisp variable. Example:
1677 (let ((start (point))) (forward-line 1) (delete-region start (point)))."
1679 (setq buffer (decode-buffer buffer))
1680 (set-marker (mark-marker t buffer) pos buffer))
1684 ; (setq mark-active t)
1685 ; (run-hooks 'activate-mark-hook)
1686 ; (set-marker (mark-marker) pos (current-buffer)))
1687 ; ;; Normally we never clear mark-active except in Transient Mark mode.
1688 ; ;; But when we actually clear out the mark value too,
1689 ; ;; we must clear mark-active in any mode.
1690 ; (setq mark-active nil)
1691 ; (run-hooks 'deactivate-mark-hook)
1692 ; (set-marker (mark-marker) nil)))
1694 (defvar mark-ring nil
1695 "The list of former marks of the current buffer, most recent first.
1696 This variable is automatically buffer-local.")
1697 (make-variable-buffer-local 'mark-ring)
1698 (put 'mark-ring 'permanent-local t)
1700 (defvar dont-record-current-mark nil
1701 "If set to t, the current mark value should not be recorded on the mark ring.
1702 This is set by commands that manipulate the mark incidentally, to avoid
1703 cluttering the mark ring unnecessarily. Under most circumstances, you do
1704 not need to set this directly; it is automatically reset each time
1705 `push-mark' is called, according to `mark-ring-unrecorded-commands'. This
1706 variable is automatically buffer-local.")
1707 (make-variable-buffer-local 'dont-record-current-mark)
1708 (put 'dont-record-current-mark 'permanent-local t)
1710 ;; a conspiracy between push-mark and handle-pre-motion-command
1711 (defvar in-shifted-motion-command nil)
1713 (defcustom mark-ring-unrecorded-commands '(shifted-motion-commands
1715 mark-beginning-of-buffer
1720 mark-end-of-sentence
1728 "*List of commands whose marks should not be recorded on the mark stack.
1729 Many commands set the mark as part of their action. Normally, all such
1730 marks get recorded onto the mark stack. However, this tends to clutter up
1731 the mark stack unnecessarily. You can control this by putting a command
1732 onto this list. Then, any marks set by the function will not be recorded.
1734 The special value `shifted-motion-commands' causes marks set as a result
1735 of selection using any shifted motion commands to not be recorded.
1737 The value `yank' affects all yank-like commands, as well as just `yank'."
1738 :type '(repeat (choice (const :tag "shifted motion commands"
1739 shifted-motion-commands)
1740 (const :tag "functions that select text"
1742 (mark-beginning-of-buffer
1747 mark-end-of-sentence
1755 (const :tag "functions that paste text"
1760 (defcustom mark-ring-max 16
1761 "*Maximum size of mark ring. Start discarding off end if gets this big."
1765 (defvar global-mark-ring nil
1766 "The list of saved global marks, most recent first.")
1768 (defcustom global-mark-ring-max 16
1769 "*Maximum size of global mark ring. \
1770 Start discarding off end if gets this big."
1774 (defun set-mark-command (arg)
1775 "Set mark at where point is, or jump to mark.
1776 With no prefix argument, set mark, push old mark position on local mark
1777 ring, and push mark on global mark ring.
1778 With argument, jump to mark, and pop a new position for mark off the ring
1779 \(does not affect global mark ring\).
1781 The mark ring is a per-buffer stack of marks, most recent first. Its
1782 maximum length is controlled by `mark-ring-max'. Generally, when new
1783 marks are set, the current mark is pushed onto the stack. You can pop
1784 marks off the stack using \\[universal-argument] \\[set-mark-command]. The term \"ring\" is used because when
1785 you pop a mark off the stack, the current mark value is pushed onto the
1786 far end of the stack. If this is confusing, just think of the mark ring
1789 Novice Emacs Lisp programmers often try to use the mark for the wrong
1790 purposes. See the documentation of `set-mark' for more information."
1793 (push-mark nil nil t)
1795 (error "No mark set in this buffer")
1796 (if dont-record-current-mark (pop-mark))
1797 (goto-char (mark t))
1800 ;; XEmacs: Extra parameter
1801 (defun push-mark (&optional location nomsg activate-region buffer)
1802 "Set mark at LOCATION (point, by default) and push old mark on mark ring.
1803 If the last global mark pushed was not in the current buffer,
1804 also push LOCATION on the global mark ring.
1805 Display `Mark set' unless the optional second arg NOMSG is non-nil.
1806 Activate mark if optional third arg ACTIVATE-REGION non-nil.
1808 Novice Emacs Lisp programmers often try to use the mark for the wrong
1809 purposes. See the documentation of `set-mark' for more information."
1810 (setq buffer (decode-buffer buffer)) ; XEmacs
1811 (if (or dont-record-current-mark (null (mark t buffer))) ; XEmacs
1813 ;; The save-excursion / set-buffer is necessary because mark-ring
1814 ;; is a buffer local variable
1817 (setq mark-ring (cons (copy-marker (mark-marker t buffer)) mark-ring))
1818 (if (> (length mark-ring) mark-ring-max)
1820 (move-marker (car (nthcdr mark-ring-max mark-ring)) nil buffer)
1821 (setcdr (nthcdr (1- mark-ring-max) mark-ring) nil)))))
1822 (set-mark (or location (point buffer)) buffer)
1823 ; (set-marker (mark-marker) (or location (point)) (current-buffer)) ; FSF
1824 ;; Now push the mark on the global mark ring.
1825 (if (and (not dont-record-current-mark)
1826 (or (null global-mark-ring)
1827 (not (eq (marker-buffer (car global-mark-ring)) buffer))))
1828 ;; The last global mark pushed wasn't in this same buffer.
1830 (setq global-mark-ring (cons (copy-marker (mark-marker t buffer))
1832 (if (> (length global-mark-ring) global-mark-ring-max)
1834 (move-marker (car (nthcdr global-mark-ring-max global-mark-ring))
1836 (setcdr (nthcdr (1- global-mark-ring-max) global-mark-ring) nil)))))
1837 (setq dont-record-current-mark
1838 (not (not (or (and in-shifted-motion-command
1839 (memq 'shifted-motion-commands
1840 mark-ring-unrecorded-commands))
1841 (memq this-command mark-ring-unrecorded-commands)))))
1842 (or dont-record-current-mark nomsg executing-kbd-macro
1843 (> (minibuffer-depth) 0)
1844 (display-message 'command "Mark set"))
1847 (setq zmacs-region-stays t)
1848 (zmacs-activate-region)))
1849 ; (if (or activate (not transient-mark-mode)) ; FSF
1850 ; (set-mark (mark t))) ; FSF
1854 "Pop off mark ring into the buffer's actual mark.
1855 Does not set point. Does nothing if mark ring is empty."
1858 (setq mark-ring (nconc mark-ring (list (copy-marker (mark-marker t)))))
1859 (set-mark (car mark-ring))
1860 (move-marker (car mark-ring) nil)
1861 (if (null (mark t)) (ding))
1862 (setq mark-ring (cdr mark-ring)))))
1864 (define-function 'exchange-dot-and-mark 'exchange-point-and-mark)
1865 (defun exchange-point-and-mark (&optional dont-activate-region)
1866 "Put the mark where point is now, and point where the mark is now.
1867 The mark is activated unless DONT-ACTIVATE-REGION is non-nil."
1869 (let ((omark (mark t)))
1871 (error "No mark set in this buffer"))
1874 (or dont-activate-region (zmacs-activate-region)) ; XEmacs
1878 (defun mark-something (mark-fn movement-fn arg)
1879 "internal function used by mark-sexp, mark-word, etc."
1880 (let (newmark (pushp t))
1882 (if (and (eq last-command mark-fn) (mark))
1883 ;; Extend the previous state in the same direction:
1885 (if (< (mark) (point)) (setq arg (- arg)))
1888 (funcall movement-fn arg)
1889 (setq newmark (point)))
1891 (push-mark newmark nil t)
1892 ;; Do not mess with the mark stack, but merely adjust the previous state:
1894 (activate-region))))
1896 ;(defun transient-mark-mode (arg)
1897 ; "Toggle Transient Mark mode.
1898 ;With arg, turn Transient Mark mode on if arg is positive, off otherwise.
1900 ;In Transient Mark mode, when the mark is active, the region is highlighted.
1901 ;Changing the buffer \"deactivates\" the mark.
1902 ;So do certain other operations that set the mark
1903 ;but whose main purpose is something else--for example,
1904 ;incremental search, \\[beginning-of-buffer], and \\[end-of-buffer]."
1906 ; (setq transient-mark-mode
1908 ; (not transient-mark-mode)
1909 ; (> (prefix-numeric-value arg) 0))))
1911 (defun pop-global-mark ()
1912 "Pop off global mark ring and jump to the top location."
1914 ;; Pop entries which refer to non-existent buffers.
1915 (while (and global-mark-ring (not (marker-buffer (car global-mark-ring))))
1916 (setq global-mark-ring (cdr global-mark-ring)))
1917 (or global-mark-ring
1918 (error "No global mark set"))
1919 (let* ((marker (car global-mark-ring))
1920 (buffer (marker-buffer marker))
1921 (position (marker-position marker)))
1922 (setq global-mark-ring (nconc (cdr global-mark-ring)
1923 (list (car global-mark-ring))))
1925 (or (and (>= position (point-min))
1926 (<= position (point-max)))
1928 (goto-char position)
1929 (switch-to-buffer buffer)))
1932 (defcustom signal-error-on-buffer-boundary t
1933 "*If Non-nil, beep or signal an error when moving past buffer boundary.
1934 The commands that honor this variable are
1936 forward-char-command
1937 backward-char-command
1941 scroll-down-command"
1943 :group 'editing-basics)
1945 ;;; After 8 years of waiting ... -sb
1946 (defcustom next-line-add-newlines nil ; XEmacs
1947 "*If non-nil, `next-line' inserts newline when the point is at end of buffer.
1948 This behavior used to be the default, and is still default in FSF Emacs.
1949 We think it is an unnecessary and unwanted side-effect."
1951 :group 'editing-basics)
1953 (defcustom shifted-motion-keys-select-region t
1954 "*If non-nil, shifted motion keys select text, like in MS Windows.
1956 More specifically, if a keystroke that matches one of the key
1957 specifications in `motion-keys-for-shifted-motion' is pressed along
1958 with the Shift key, and the command invoked moves the cursor and
1959 preserves the active region (see `zmacs-region-stays'), the
1960 intervening text will be added to the active region.
1962 When the region has been enabled or augmented as a result of a shifted
1963 motion key, an unshifted motion key will normally deselect the region.
1964 However, if `unshifted-motion-keys-deselect-region' is t, the region
1965 will remain active, augmented by the characters moved over by this
1968 This functionality is specifically interpreted in terms of keys, and
1969 *NOT* in terms of particular commands, because that produces the most
1970 intuitive behavior: `forward-char' will work with shifted motion
1971 when invoked by `right' but not `C-f', and user-written motion commands
1972 bound to motion keys will automatically work with shifted motion."
1974 :group 'editing-basics)
1976 (defcustom unshifted-motion-keys-deselect-region t
1977 "*If non-nil, unshifted motion keys deselect a shifted-motion region.
1978 This only occurs after a region has been selected or augmented using
1979 shifted motion keys (not when using the traditional set-mark-then-move
1980 method), and has no effect if `shifted-motion-keys-select-region' is
1983 :group 'editing-basics)
1985 (defcustom motion-keys-for-shifted-motion
1986 '(left right up down home end prior next
1987 kp-left kp-right kp-up kp-down kp-home kp-end kp-prior kp-next)
1988 "*List of keys considered motion keys for the purpose of shifted selection.
1989 When one of these keys is pressed along with the Shift key, and the
1990 command invoked moves the cursor and preserves the active region (see
1991 `zmacs-region-stays'), the intervening text will be added to the active
1992 region. See `shifted-motion-keys-select-region' for more details.
1994 Each entry should be a keysym or a list (MODIFIERS ... KEYSYM),
1995 i.e. zero or more modifiers followed by a keysym. When a keysym alone
1996 is given, a keystroke consisting of that keysym, with or without any
1997 modifiers, is considered a motion key. When the list form is given,
1998 only a keystroke with exactly those modifiers and no others (with the
1999 exception of the Shift key) is considered a motion key.
2001 NOTE: Currently, the keysym cannot be a non-alphabetic character key
2002 such as the `=/+' key. In any case, the shifted-motion paradigm does
2003 not make much sense with those keys. The keysym can, however, be an
2004 alphabetic key without problem, and you can specify the key using
2005 either a character or a symbol, uppercase or lowercase."
2006 :type '(repeat (choice (const :tag "normal cursor-pad (\"gray\") keys"
2008 (left right up down home end prior next))
2009 (const :tag "keypad motion keys"
2011 (kp-left kp-right kp-up kp-down
2012 kp-home kp-end kp-prior kp-next))
2013 (const :tag "alphabetic motion keys"
2015 ((control b) (control f)
2016 (control p) (control n)
2017 (control a) (control e)
2018 (control v) (meta v)
2021 (meta m) ; back-to-indentation
2022 (meta r) ; move-to-window-line
2023 (meta control b) (meta control f)
2024 (meta control p) (meta control n)
2025 (meta control a) (meta control e)
2026 (meta control d) ;; down-list
2027 (meta control u) ;; backward-up-list
2030 :group 'editing-basics)
2032 (defun handle-pre-motion-command-current-command-is-motion ()
2033 (and (key-press-event-p last-input-event)
2034 (let ((key (event-key last-input-event))
2035 (mods (delq 'shift (event-modifiers last-input-event))))
2036 ;(princ (format "key: %s mods: %s\n" key mods) 'external-debugging-output)
2037 (catch 'handle-pre-motion-command-current-command-is-motion
2038 (flet ((keysyms-equal (a b)
2040 (setq a (intern (char-to-string (downcase a)))))
2042 (setq b (intern (char-to-string (downcase b)))))
2044 (mapc #'(lambda (keysym)
2045 (when (if (listp keysym)
2046 (and (equal mods (butlast keysym))
2047 (keysyms-equal key (car (last keysym))))
2048 (keysyms-equal key keysym))
2050 'handle-pre-motion-command-current-command-is-motion
2052 motion-keys-for-shifted-motion)
2055 (defun handle-pre-motion-command ()
2057 (handle-pre-motion-command-current-command-is-motion)
2059 shifted-motion-keys-select-region
2060 (not (region-active-p))
2061 ;; Special-case alphabetic keysyms, because the `shift'
2062 ;; modifier does not appear on them. (Unfortunately, we have no
2063 ;; way of determining Shift-key status on non-alphabetic ASCII
2064 ;; keysyms. However, in this case, using Shift will invoke a
2065 ;; separate command from the non-shifted version, so the
2066 ;; "shifted motion" paradigm makes no sense.)
2067 (or (memq 'shift (event-modifiers last-input-event))
2068 (let ((key (event-key last-input-event)))
2069 (and (characterp key)
2070 (not (eq key (downcase key)))))))
2071 (let ((in-shifted-motion-command t))
2072 (push-mark nil nil t))))
2074 (defun handle-post-motion-command ()
2077 (handle-pre-motion-command-current-command-is-motion)
2080 ;; Special-case alphabetic keysyms, because the `shift'
2081 ;; modifier does not appear on them. See above.
2082 (cond ((or (memq 'shift (event-modifiers last-input-event))
2083 (let ((key (event-key last-input-event)))
2084 (and (characterp key)
2085 (not (eq key (downcase key))))))
2086 (if shifted-motion-keys-select-region
2087 (putf this-command-properties 'shifted-motion-command t))
2088 (setq zmacs-region-stays t))
2089 ((and (getf last-command-properties 'shifted-motion-command)
2090 unshifted-motion-keys-deselect-region)
2091 (setq zmacs-region-stays nil))
2093 (setq zmacs-region-stays t)))))
2095 (defun forward-char-command (&optional arg buffer)
2096 "Move point right ARG characters (left if ARG negative) in BUFFER.
2097 On attempt to pass end of buffer, stop and signal `end-of-buffer'.
2098 On attempt to pass beginning of buffer, stop and signal `beginning-of-buffer'.
2099 Error signaling is suppressed if `signal-error-on-buffer-boundary'
2100 is nil. If BUFFER is nil, the current buffer is assumed.
2102 The characters that are moved over may be added to the current selection
2103 \(i.e. active region) if the Shift key is held down, a motion key is used
2104 to invoke this command, and `shifted-motion-keys-select-region' is t; see
2105 the documentation for this variable for more details."
2107 (if signal-error-on-buffer-boundary
2108 (forward-char arg buffer)
2110 (forward-char arg buffer)
2111 (beginning-of-buffer nil)
2112 (end-of-buffer nil))))
2114 (defun backward-char-command (&optional arg buffer)
2115 "Move point left ARG characters (right if ARG negative) in BUFFER.
2116 On attempt to pass end of buffer, stop and signal `end-of-buffer'.
2117 On attempt to pass beginning of buffer, stop and signal `beginning-of-buffer'.
2118 Error signaling is suppressed if `signal-error-on-buffer-boundary'
2119 is nil. If BUFFER is nil, the current buffer is assumed.
2121 The characters that are moved over may be added to the current selection
2122 \(i.e. active region) if the Shift key is held down, a motion key is used
2123 to invoke this command, and `shifted-motion-keys-select-region' is t; see
2124 the documentation for this variable for more details."
2126 (if signal-error-on-buffer-boundary
2127 (backward-char arg buffer)
2129 (backward-char arg buffer)
2130 (beginning-of-buffer nil)
2131 (end-of-buffer nil))))
2133 (defun scroll-up-one ()
2134 "Scroll text of current window upward one line.
2135 On attempt to scroll past end of buffer, `end-of-buffer' is signaled.
2136 On attempt to scroll past beginning of buffer, `beginning-of-buffer' is
2139 If `signal-error-on-buffer-boundary' is nil, attempts to scroll past buffer
2140 boundaries do not cause an error to be signaled."
2142 (scroll-up-command 1))
2144 (defun scroll-up-command (&optional n)
2145 "Scroll current window upward N lines; or near full screen if N is nil.
2146 A near full screen is `next-screen-context-lines' less than a full screen.
2147 Negative N means scroll downward.
2148 When calling from a program, supply a number as argument or nil.
2149 On attempt to scroll past end of buffer, `end-of-buffer' is signaled.
2150 On attempt to scroll past beginning of buffer, `beginning-of-buffer' is
2153 The characters that are moved over may be added to the current selection
2154 \(i.e. active region) if the Shift key is held down, a motion key is used
2155 to invoke this command, and `shifted-motion-keys-select-region' is t; see
2156 the documentation for this variable for more details.
2158 If `signal-error-on-buffer-boundary' is nil, attempts to scroll past buffer
2159 boundaries do not cause an error to be signaled."
2161 (if signal-error-on-buffer-boundary
2165 (beginning-of-buffer nil)
2166 (end-of-buffer nil))))
2168 (defun scroll-down-one ()
2169 "Scroll text of current window downward one line.
2170 On attempt to scroll past end of buffer, `end-of-buffer' is signaled.
2171 On attempt to scroll past beginning of buffer, `beginning-of-buffer' is
2174 If `signal-error-on-buffer-boundary' is nil, attempts to scroll past buffer
2175 boundaries do not cause an error to be signaled."
2177 (scroll-down-command 1))
2179 (defun scroll-down-command (&optional n)
2180 "Scroll current window downward N lines; or near full screen if N is nil.
2181 A near full screen is `next-screen-context-lines' less than a full screen.
2182 Negative N means scroll upward.
2183 When calling from a program, supply a number as argument or nil.
2184 On attempt to scroll past end of buffer, `end-of-buffer' is signaled.
2185 On attempt to scroll past beginning of buffer, `beginning-of-buffer' is
2188 If `signal-error-on-buffer-boundary' is nil, attempts to scroll past buffer
2189 boundaries do not cause an error to be signaled.
2191 The characters that are moved over may be added to the current selection
2192 \(i.e. active region) if the Shift key is held down, a motion key is used
2193 to invoke this command, and `shifted-motion-keys-select-region' is t; see
2194 the documentation for this variable for more details."
2196 (if signal-error-on-buffer-boundary
2200 (beginning-of-buffer nil)
2201 (end-of-buffer nil))))
2203 (defun next-line (count)
2204 "Move cursor vertically down COUNT lines.
2205 If there is no character in the target line exactly under the current column,
2206 the cursor is positioned after the character in that line which spans this
2207 column, or at the end of the line if it is not long enough.
2209 If there is no line in the buffer after this one, behavior depends on the
2210 value of `next-line-add-newlines'. If non-nil, it inserts a newline character
2211 to create a line, and moves the cursor to that line. Otherwise it moves the
2212 cursor to the end of the buffer.
2214 The command \\[set-goal-column] can be used to create
2215 a semipermanent goal column to which this command always moves.
2216 Then it does not try to move vertically. This goal column is stored
2217 in `goal-column', which is nil when there is none.
2219 The characters that are moved over may be added to the current selection
2220 \(i.e. active region) if the Shift key is held down, a motion key is used
2221 to invoke this command, and `shifted-motion-keys-select-region' is t; see
2222 the documentation for this variable for more details.
2224 If you are thinking of using this in a Lisp program, consider
2225 using `forward-line' instead. It is usually easier to use
2226 and more reliable (no dependence on goal column, etc.)."
2228 (if (and next-line-add-newlines (= count 1))
2229 (let ((opoint (point)))
2236 ;; XEmacs: Not sure what to do about this. It's inconsistent. -sb
2239 ((beginning-of-buffer end-of-buffer)
2240 (when signal-error-on-buffer-boundary
2241 (ding nil 'buffer-bound))))
2245 (defun previous-line (count)
2246 "Move cursor vertically up COUNT lines.
2247 If there is no character in the target line exactly over the current column,
2248 the cursor is positioned after the character in that line which spans this
2249 column, or at the end of the line if it is not long enough.
2251 The command \\[set-goal-column] can be used to create
2252 a semipermanent goal column to which this command always moves.
2253 Then it does not try to move vertically.
2255 The characters that are moved over may be added to the current selection
2256 \(i.e. active region) if the Shift key is held down, a motion key is used
2257 to invoke this command, and `shifted-motion-keys-select-region' is t; see
2258 the documentation for this variable for more details.
2260 If you are thinking of using this in a Lisp program, consider using
2261 `forward-line' with a negative argument instead. It is usually easier
2262 to use and more reliable (no dependence on goal column, etc.)."
2266 (line-move (- count))
2267 ((beginning-of-buffer end-of-buffer)
2268 (when signal-error-on-buffer-boundary ; XEmacs
2269 (ding nil 'buffer-bound))))
2270 (line-move (- count)))
2273 (defcustom block-movement-size 6
2274 "*Number of lines that \"block movement\" commands (\\[forward-block-of-lines], \\[backward-block-of-lines]) move by."
2276 :group 'editing-basics)
2278 (defun backward-block-of-lines ()
2279 "Move backward by one \"block\" of lines.
2280 The number of lines that make up a block is controlled by
2281 `block-movement-size', which defaults to 6.
2283 The characters that are moved over may be added to the current selection
2284 \(i.e. active region) if the Shift key is held down, a motion key is used
2285 to invoke this command, and `shifted-motion-keys-select-region' is t; see
2286 the documentation for this variable for more details."
2288 (forward-line (- block-movement-size)))
2290 (defun forward-block-of-lines ()
2291 "Move forward by one \"block\" of lines.
2292 The number of lines that make up a block is controlled by
2293 `block-movement-size', which defaults to 6.
2295 The characters that are moved over may be added to the current selection
2296 \(i.e. active region) if the Shift key is held down, a motion key is used
2297 to invoke this command, and `shifted-motion-keys-select-region' is t; see
2298 the documentation for this variable for more details."
2300 (forward-line block-movement-size))
2302 (defcustom track-eol nil
2303 "*Non-nil means vertical motion starting at end of line keeps to ends of lines.
2304 This means moving to the end of each line moved onto.
2305 The beginning of a blank line does not count as the end of a line."
2307 :group 'editing-basics)
2309 (defcustom goal-column nil
2310 "*Semipermanent goal column for vertical motion, as set by \\[set-goal-column], or nil."
2311 :type '(choice integer (const :tag "None" nil))
2312 :group 'editing-basics)
2313 (make-variable-buffer-local 'goal-column)
2315 (defvar temporary-goal-column 0
2316 "Current goal column for vertical motion.
2317 It is the column where point was
2318 at the start of current run of vertical motion commands.
2319 When the `track-eol' feature is doing its job, the value is 9999.")
2320 (make-variable-buffer-local 'temporary-goal-column)
2322 ;XEmacs: not yet ported, so avoid compiler warnings
2324 (defvar inhibit-point-motion-hooks))
2326 (defcustom line-move-ignore-invisible nil
2327 "*Non-nil means \\[next-line] and \\[previous-line] ignore invisible lines.
2328 Use with care, as it slows down movement significantly. Outline mode sets this."
2330 :group 'editing-basics)
2332 ;; This is the guts of next-line and previous-line.
2333 ;; Count says how many lines to move.
2334 (defun line-move (count)
2335 ;; Don't run any point-motion hooks, and disregard intangibility,
2336 ;; for intermediate positions.
2337 (let ((inhibit-point-motion-hooks t)
2342 (if (not (or (eq last-command 'next-line)
2343 (eq last-command 'previous-line)))
2344 (setq temporary-goal-column
2345 (if (and track-eol (eolp)
2346 ;; Don't count start of empty line as end of line
2347 ;; unless we just did explicit end-of-line.
2348 (or (not (bolp)) (eq last-command 'end-of-line)))
2351 (if (and (not (integerp selective-display))
2352 (not line-move-ignore-invisible))
2353 ;; Use just newline characters.
2355 (progn (if (> count 1) (forward-line (1- count)))
2356 ;; This way of moving forward COUNT lines
2357 ;; verifies that we have a newline after the last one.
2358 ;; It doesn't get confused by intangible text.
2360 (zerop (forward-line 1)))
2361 (and (zerop (forward-line count))
2363 (signal (if (< count 0)
2364 'beginning-of-buffer
2367 ;; Move by count lines, but ignore invisible ones.
2370 (and (zerop (vertical-motion 1))
2371 (signal 'end-of-buffer nil))
2372 ;; If the following character is currently invisible,
2373 ;; skip all characters with that same `invisible' property value.
2374 (while (and (not (eobp))
2376 (get-char-property (point) 'invisible)))
2377 (if (eq buffer-invisibility-spec t)
2379 (or (memq prop buffer-invisibility-spec)
2380 (assq prop buffer-invisibility-spec)))))
2381 (if (get-text-property (point) 'invisible)
2382 (goto-char (next-single-property-change (point) 'invisible))
2383 (goto-char (next-extent-change (point))))) ; XEmacs
2384 (setq count (1- count)))
2387 (and (zerop (vertical-motion -1))
2388 (signal 'beginning-of-buffer nil))
2389 (while (and (not (bobp))
2391 (get-char-property (1- (point)) 'invisible)))
2392 (if (eq buffer-invisibility-spec t)
2394 (or (memq prop buffer-invisibility-spec)
2395 (assq prop buffer-invisibility-spec)))))
2396 (if (get-text-property (1- (point)) 'invisible)
2397 (goto-char (previous-single-property-change (point) 'invisible))
2398 (goto-char (previous-extent-change (point))))) ; XEmacs
2399 (setq count (1+ count))))
2400 (move-to-column (or goal-column temporary-goal-column)))
2401 ;; Remember where we moved to, go back home,
2402 ;; then do the motion over again
2403 ;; in just one step, with intangibility and point-motion hooks
2404 ;; enabled this time.
2407 (setq inhibit-point-motion-hooks nil)
2411 ;;; Many people have said they rarely use this feature, and often type
2412 ;;; it by accident. Maybe it shouldn't even be on a key.
2413 ;; It's not on a key, as of 20.2. So no need for this.
2414 ;(put 'set-goal-column 'disabled t)
2416 (defun set-goal-column (column)
2417 "Set the current horizontal position as a goal for \\[next-line] and \\[previous-line].
2418 Those commands will move to this position in the line moved to
2419 rather than trying to keep the same horizontal position.
2420 With a non-nil argument, clears out the goal column
2421 so that \\[next-line] and \\[previous-line] resume vertical motion.
2422 The goal column is stored in the variable `goal-column'."
2423 (interactive "_P") ; XEmacs
2426 (setq goal-column nil)
2427 (display-message 'command "No goal column"))
2428 (setq goal-column (current-column))
2430 "Goal column %d (use %s with a prefix arg to unset it)"
2432 (substitute-command-keys "\\[set-goal-column]")))
2435 ;; deleted FSFmacs terminal randomness hscroll-point-visible stuff.
2437 ;; hscroll-point-visible
2438 ;; hscroll-window-column
2442 (defun scroll-other-window-down (lines)
2443 "Scroll the \"other window\" down.
2444 For more details, see the documentation for `scroll-other-window'."
2446 (scroll-other-window
2447 ;; Just invert the argument's meaning.
2448 ;; We can do that without knowing which window it will be.
2449 (if (eq lines '-) nil
2451 (- (prefix-numeric-value lines))))))
2452 ;(define-key esc-map [?\C-\S-v] 'scroll-other-window-down)
2454 (defun beginning-of-buffer-other-window (arg)
2455 "Move point to the beginning of the buffer in the other window.
2456 Leave mark at previous position.
2457 With arg N, put point N/10 of the way from the true beginning."
2459 (let ((orig-window (selected-window))
2460 (window (other-window-for-scrolling)))
2461 ;; We use unwind-protect rather than save-window-excursion
2462 ;; because the latter would preserve the things we want to change.
2465 (select-window window)
2466 ;; Set point and mark in that window's buffer.
2467 (beginning-of-buffer arg)
2468 ;; Set point accordingly.
2470 (select-window orig-window))))
2472 (defun end-of-buffer-other-window (arg)
2473 "Move point to the end of the buffer in the other window.
2474 Leave mark at previous position.
2475 With arg N, put point N/10 of the way from the true end."
2477 ;; See beginning-of-buffer-other-window for comments.
2478 (let ((orig-window (selected-window))
2479 (window (other-window-for-scrolling)))
2482 (select-window window)
2485 (select-window orig-window))))
2487 (defun transpose-chars (arg)
2488 "Interchange characters around point, moving forward one character.
2489 With prefix arg ARG, effect is to take character before point
2490 and drag it forward past ARG other characters (backward if ARG negative).
2491 If no argument and at end of line, the previous two chars are exchanged."
2493 (and (null arg) (eolp) (backward-char 1))
2494 (transpose-subr 'forward-char (prefix-numeric-value arg)))
2496 ;;; A very old implementation of transpose-chars from the old days ...
2497 (defun transpose-preceding-chars (arg)
2498 "Interchange characters before point.
2499 With prefix arg ARG, effect is to take character before point
2500 and drag it forward past ARG other characters (backward if ARG negative).
2501 If no argument and not at start of line, the previous two chars are exchanged."
2503 (and (null arg) (not (bolp)) (backward-char 1))
2504 (transpose-subr 'forward-char (prefix-numeric-value arg)))
2507 (defun transpose-words (arg)
2508 "Interchange words around point, leaving point at end of them.
2509 With prefix arg ARG, effect is to take word before or around point
2510 and drag it forward past ARG other words (backward if ARG negative).
2511 If ARG is zero, the words around or after point and around or after mark
2514 (transpose-subr 'forward-word arg))
2516 (defun transpose-sexps (arg)
2517 "Like \\[transpose-words] but applies to sexps.
2518 Does not work on a sexp that point is in the middle of
2519 if it is a list or string."
2521 (transpose-subr 'forward-sexp arg))
2523 (defun transpose-lines (arg)
2524 "Exchange current line and previous line, leaving point after both.
2525 With argument ARG, takes previous line and moves it past ARG lines.
2526 With argument 0, interchanges line point is in with line mark is in."
2528 (transpose-subr #'(lambda (arg)
2531 ;; Move forward over a line,
2532 ;; but create a newline if none exists yet.
2537 (forward-line arg)))
2540 (defun transpose-line-up (arg)
2541 "Move current line one line up, leaving point at beginning of that line.
2542 This can be run repeatedly to move the current line up a number of lines."
2544 ;; Move forward over a line,
2545 ;; but create a newline if none exists yet.
2550 (transpose-lines (- arg))
2553 (defun transpose-line-down (arg)
2554 "Move current line one line down, leaving point at beginning of that line.
2555 This can be run repeatedly to move the current line down a number of lines."
2557 ;; Move forward over a line,
2558 ;; but create a newline if none exists yet.
2563 (transpose-lines arg)
2566 (defun transpose-subr (mover arg)
2567 (let (start1 end1 start2 end2)
2568 ;; XEmacs -- use flet instead of defining a separate function and
2569 ;; relying on dynamic scope!!!
2570 (flet ((transpose-subr-1 ()
2571 (if (> (min end1 end2) (max start1 start2))
2572 (error "Don't have two things to transpose"))
2573 (let ((word1 (buffer-substring start1 end1))
2574 (word2 (buffer-substring start2 end2)))
2575 (delete-region start2 end2)
2578 (goto-char (if (< start1 start2) start1
2579 (+ start1 (- (length word1) (length word2)))))
2580 (delete-char (length word1))
2588 (setq start2 (point))
2589 (goto-char (mark t)) ; XEmacs
2593 (setq start1 (point))
2595 (exchange-point-and-mark t))) ; XEmacs
2598 (setq start1 (point))
2604 (setq start2 (point))
2607 (setq arg (1- arg)))
2610 (setq start2 (point))
2612 (setq start1 (point))
2618 (setq arg (1+ arg))))))
2621 (defcustom comment-column 32
2622 "*Column to indent right-margin comments to.
2623 Setting this variable automatically makes it local to the current buffer.
2624 Each mode establishes a different default value for this variable; you
2625 can set the value for a particular mode using that mode's hook."
2627 :group 'fill-comments)
2628 (make-variable-buffer-local 'comment-column)
2630 (defcustom comment-start nil
2631 "*String to insert to start a new comment, or nil if no comment syntax."
2632 :type '(choice (const :tag "None" nil)
2634 :group 'fill-comments)
2636 (defcustom comment-start-skip nil
2637 "*Regexp to match the start of a comment plus everything up to its body.
2638 If there are any \\(...\\) pairs, the comment delimiter text is held to begin
2639 at the place matched by the close of the first pair."
2640 :type '(choice (const :tag "None" nil)
2642 :group 'fill-comments)
2644 (defcustom comment-end ""
2645 "*String to insert to end a new comment.
2646 Should be an empty string if comments are terminated by end-of-line."
2648 :group 'fill-comments)
2650 (defconst comment-indent-hook nil
2651 "Obsolete variable for function to compute desired indentation for a comment.
2652 Use `comment-indent-function' instead.
2653 This function is called with no args with point at the beginning of
2654 the comment's starting delimiter.")
2656 (defconst comment-indent-function
2657 ;; XEmacs - add at least one space after the end of the text on the
2662 (let ((eol (save-excursion (end-of-line) (point))))
2663 (and comment-start-skip
2664 (re-search-forward comment-start-skip eol t)
2665 (setq eol (match-beginning 0)))
2667 (skip-chars-backward " \t")
2668 (max comment-column (1+ (current-column))))))
2669 "Function to compute desired indentation for a comment.
2670 This function is called with no args with point at the beginning of
2671 the comment's starting delimiter.")
2673 (defcustom block-comment-start nil
2674 "*String to insert to start a new comment on a line by itself.
2675 If nil, use `comment-start' instead.
2676 Note that the regular expression `comment-start-skip' should skip this string
2677 as well as the `comment-start' string."
2678 :type '(choice (const :tag "Use `comment-start'" nil)
2680 :group 'fill-comments)
2682 (defcustom block-comment-end nil
2683 "*String to insert to end a new comment on a line by itself.
2684 Should be an empty string if comments are terminated by end-of-line.
2685 If nil, use `comment-end' instead."
2686 :type '(choice (const :tag "Use `comment-end'" nil)
2688 :group 'fill-comments)
2690 (defun indent-for-comment ()
2691 "Indent this line's comment to comment column, or insert an empty
2692 comment. Comments starting in column 0 are not moved."
2694 (let* ((empty (save-excursion (beginning-of-line)
2695 (looking-at "[ \t]*$")))
2696 (starter (or (and empty block-comment-start) comment-start))
2697 (ender (or (and empty block-comment-end) comment-end)))
2699 (error "No comment syntax defined")
2700 (let* ((eolpos (save-excursion (end-of-line) (point)))
2703 (if (re-search-forward comment-start-skip eolpos 'move)
2704 (progn (setq cpos (point-marker))
2705 ;; Find the start of the comment delimiter.
2706 ;; If there were paren-pairs in comment-start-skip,
2707 ;; position at the end of the first pair.
2709 (goto-char (match-end 1))
2710 ;; If comment-start-skip matched a string with
2711 ;; internal whitespace (not final whitespace) then
2712 ;; the delimiter start at the end of that
2713 ;; whitespace. Otherwise, it starts at the
2714 ;; beginning of what was matched.
2715 (skip-syntax-backward " " (match-beginning 0))
2716 (skip-syntax-backward "^ " (match-beginning 0)))))
2717 (setq begpos (point))
2718 ;; Compute desired indent.
2719 ;; XEmacs change: Preserve indentation of comments starting in
2720 ;; column 0, as documented.
2722 ((= (current-column) 0)
2724 ((= (current-column)
2725 (setq indent (funcall comment-indent-function)))
2728 ;; If that's different from current, change it.
2729 (skip-chars-backward " \t")
2730 (delete-region (point) begpos)
2731 (indent-to indent)))
2732 ;; An existing comment?
2734 (progn (goto-char cpos)
2735 (set-marker cpos nil))
2739 (insert ender)))))))
2741 (defun set-comment-column (arg)
2742 "Set the comment column based on point.
2743 With no arg, set the comment column to the current column.
2744 With just minus as arg, kill any comment on this line.
2745 With any other arg, set comment column to indentation of the previous comment
2746 and then align or create a comment on this line at that column."
2754 (re-search-backward comment-start-skip)
2756 (re-search-forward comment-start-skip)
2757 (goto-char (match-beginning 0))
2758 (setq comment-column (current-column))
2759 (lmessage 'command "Comment column set to %d" comment-column))
2760 (indent-for-comment))
2761 (setq comment-column (current-column))
2762 (lmessage 'command "Comment column set to %d" comment-column))))
2764 (defun kill-comment (arg)
2765 "Kill the comment on this line, if any.
2766 With argument, kill comments on that many lines starting with this one."
2767 ;; this function loses in a lot of situations. it incorrectly recognizes
2768 ;; comment delimiters sometimes (ergo, inside a string), doesn't work
2769 ;; with multi-line comments, can kill extra whitespace if comment wasn't
2770 ;; through end-of-line, et cetera.
2772 (or comment-start-skip (error "No comment syntax defined"))
2773 (let ((count (prefix-numeric-value arg)) endc)
2779 (and (string< "" comment-end)
2782 (re-search-forward (regexp-quote comment-end) endc 'move)
2783 (skip-chars-forward " \t")
2786 (if (re-search-forward comment-start-skip endc t)
2788 (goto-char (match-beginning 0))
2789 (skip-chars-backward " \t")
2790 (kill-region (point) endc)
2791 ;; to catch comments a line beginnings
2792 (indent-according-to-mode))))
2793 (if arg (forward-line 1))
2794 (setq count (1- count)))))
2796 (defun comment-region (start end &optional arg)
2797 "Comment or uncomment each line in the region.
2798 With just C-u prefix arg, uncomment each line in region.
2799 Numeric prefix arg ARG means use ARG comment characters.
2800 If ARG is negative, delete that many comment characters instead.
2801 Comments are terminated on each line, even for syntax in which newline does
2802 not end the comment. Blank lines do not get comments."
2803 ;; if someone wants it to only put a comment-start at the beginning and
2804 ;; comment-end at the end then typing it, C-x C-x, closing it, C-x C-x
2805 ;; is easy enough. No option is made here for other than commenting
2807 (interactive "r\nP")
2808 (or comment-start (error "No comment syntax is defined"))
2809 (if (> start end) (let (mid) (setq mid start start end end mid)))
2812 (let ((cs comment-start) (ce comment-end)
2814 (if (consp arg) (setq numarg t)
2815 (setq numarg (prefix-numeric-value arg))
2816 ;; For positive arg > 1, replicate the comment delims now,
2817 ;; then insert the replicated strings just once.
2819 (setq cs (concat cs comment-start)
2820 ce (concat ce comment-end))
2821 (setq numarg (1- numarg))))
2822 ;; Loop over all lines from START to END.
2823 (narrow-to-region start end)
2826 (if (or (eq numarg t) (< numarg 0))
2828 ;; Delete comment start from beginning of line.
2830 (while (looking-at (regexp-quote cs))
2831 (delete-char (length cs)))
2832 (let ((count numarg))
2833 (while (and (> 1 (setq count (1+ count)))
2834 (looking-at (regexp-quote cs)))
2835 (delete-char (length cs)))))
2836 ;; Delete comment end from end of line.
2842 ;; This is questionable if comment-end ends in
2843 ;; whitespace. That is pretty brain-damaged,
2845 (skip-chars-backward " \t")
2846 (if (and (>= (- (point) (point-min)) (length ce))
2848 (backward-char (length ce))
2849 (looking-at (regexp-quote ce))))
2850 (delete-char (- (length ce)))))
2851 (let ((count numarg))
2852 (while (> 1 (setq count (1+ count)))
2854 ;; This is questionable if comment-end ends in
2855 ;; whitespace. That is pretty brain-damaged though
2856 (skip-chars-backward " \t")
2858 (backward-char (length ce))
2859 (if (looking-at (regexp-quote ce))
2860 (delete-char (length ce))))))))
2862 ;; Insert at beginning and at end.
2863 (if (looking-at "[ \t]*$") ()
2865 (if (string= "" ce) ()
2868 (search-forward "\n" nil 'move)))))))
2871 (defun prefix-region (prefix)
2872 "Add a prefix string to each line between mark and point."
2873 (interactive "sPrefix string: ")
2875 (let ((count (count-lines (mark) (point))))
2876 (goto-char (min (mark) (point)))
2878 (setq count (1- count))
2879 (beginning-of-line 1)
2882 (forward-char 1)))))
2885 (defun backward-word (&optional count buffer)
2886 "Move point backward COUNT words (forward if COUNT is negative).
2887 Normally t is returned, but if an edge of the buffer is reached,
2888 point is left there and nil is returned.
2890 COUNT defaults to 1, and BUFFER defaults to the current buffer.
2892 The characters that are moved over may be added to the current selection
2893 \(i.e. active region) if the Shift key is held down, a motion key is used
2894 to invoke this command, and `shifted-motion-keys-select-region' is t; see
2895 the documentation for this variable for more details."
2897 (forward-word (- (or count 1)) buffer))
2899 (defun mark-word (&optional count)
2900 "Mark the text from point until encountering the end of a word.
2901 With optional argument COUNT, mark COUNT words."
2903 (mark-something 'mark-word 'forward-word count))
2905 (defun kill-word (&optional count)
2906 "Kill characters forward until encountering the end of a word.
2907 With optional argument COUNT, do this that many times."
2909 (kill-region (point) (save-excursion (forward-word count) (point))))
2911 (defun backward-kill-word (&optional count)
2912 "Kill characters backward until encountering the end of a word.
2913 With argument, do this that many times."
2915 (kill-word (- (or count 1))))
2917 (defun current-word (&optional strict)
2918 "Return the word point is on (or a nearby word) as a string.
2919 If optional arg STRICT is non-nil, return nil unless point is within
2920 or adjacent to a word.
2921 If point is not between two word-constituent characters, but immediately
2922 follows one, move back first.
2923 Otherwise, if point precedes a word constituent, move forward first.
2924 Otherwise, move backwards until a word constituent is found and get that word;
2925 if you a newlines is reached first, move forward instead."
2927 (let ((oldpoint (point)) (start (point)) (end (point)))
2928 (skip-syntax-backward "w_") (setq start (point))
2929 (goto-char oldpoint)
2930 (skip-syntax-forward "w_") (setq end (point))
2931 (if (and (eq start oldpoint) (eq end oldpoint))
2932 ;; Point is neither within nor adjacent to a word.
2935 ;; Look for preceding word in same line.
2936 (skip-syntax-backward "^w_"
2938 (beginning-of-line) (point)))
2940 ;; No preceding word in same line.
2941 ;; Look for following word in same line.
2943 (skip-syntax-forward "^w_"
2945 (end-of-line) (point)))
2946 (setq start (point))
2947 (skip-syntax-forward "w_")
2950 (skip-syntax-backward "w_")
2951 (setq start (point)))
2952 (buffer-substring start end)))
2953 (buffer-substring start end)))))
2955 (defcustom fill-prefix nil
2956 "*String for filling to insert at front of new line, or nil for none.
2957 Setting this variable automatically makes it local to the current buffer."
2958 :type '(choice (const :tag "None" nil)
2961 (make-variable-buffer-local 'fill-prefix)
2963 (defcustom auto-fill-inhibit-regexp nil
2964 "*Regexp to match lines which should not be auto-filled."
2965 :type '(choice (const :tag "None" nil)
2969 (defvar comment-line-break-function 'indent-new-comment-line
2970 "*Mode-specific function which line breaks and continues a comment.
2972 This function is only called during auto-filling of a comment section.
2973 The function should take a single optional argument which is a flag
2974 indicating whether soft newlines should be inserted.")
2976 ;; defined in mule-base/mule-category.el
2977 (defvar word-across-newline)
2979 ;; This function is the auto-fill-function of a buffer
2980 ;; when Auto-Fill mode is enabled.
2981 ;; It returns t if it really did any work.
2982 ;; XEmacs: This function is totally different.
2983 (defun do-auto-fill ()
2985 (or (and auto-fill-inhibit-regexp
2986 (save-excursion (beginning-of-line)
2987 (looking-at auto-fill-inhibit-regexp)))
2988 (while (and (not give-up) (> (current-column) fill-column))
2989 ;; Determine where to split the line.
2990 (let ((fill-prefix fill-prefix)
2992 (let ((opoint (point))
2994 ;; 97/3/14 jhod: Kinsoku
2995 (re-break-point (if (featurep 'mule)
2996 (concat "[ \t\n]\\|" word-across-newline
2997 ".\\|." word-across-newline)
3002 (move-to-column (1+ fill-column))
3003 ;; Move back to a word boundary.
3005 ;; If this is after period and a single space,
3006 ;; move back once more--we don't want to break
3007 ;; the line there and make it look like a
3011 sentence-end-double-space
3012 (save-excursion (backward-char 1)
3013 (and (looking-at "\\. ")
3014 (not (looking-at "\\. "))))))
3016 ;; 97/3/14 jhod: Kinsoku
3017 ; (skip-chars-backward "^ \t\n"))
3018 (fill-move-backward-to-break-point re-break-point)
3020 ;; If we find nowhere on the line to break it,
3021 ;; break after one word. Set bounce to t
3022 ;; so we will not keep going in this while loop.
3025 ;; 97/3/14 jhod: Kinsoku
3026 ; (re-search-forward "[ \t]" opoint t)
3027 (fill-move-forward-to-break-point re-break-point
3031 (skip-chars-backward " \t"))
3032 (if (and (featurep 'mule)
3033 (or bounce (bolp))) (kinsoku-process)) ;; 97/3/14 jhod: Kinsoku
3034 ;; Let fill-point be set to the place where we end up.
3037 ;; I'm not sure why Stig made this change but it breaks
3038 ;; auto filling in at least C mode so I'm taking it back
3040 ;; XEmacs - adaptive fill.
3041 ;;(maybe-adapt-fill-prefix
3042 ;; (or from (setq from (save-excursion (beginning-of-line)
3044 ;; (or to (setq to (save-excursion (beginning-of-line 2)
3048 ;; If that place is not the beginning of the line,
3049 ;; break the line there.
3051 (goto-char fill-point)
3052 (not (or (bolp) (eolp)))) ; 97/3/14 jhod: during kinsoku processing it is possible to move beyond
3053 (let ((prev-column (current-column)))
3054 ;; If point is at the fill-point, do not `save-excursion'.
3055 ;; Otherwise, if a comment prefix or fill-prefix is inserted,
3056 ;; point will end up before it rather than after it.
3058 (skip-chars-backward " \t")
3059 (= (point) fill-point))
3060 ;; 1999-09-17 hniksic: turn off Kinsoku until
3062 (funcall comment-line-break-function)
3063 ;; 97/3/14 jhod: Kinsoku processing
3064 ; ;(indent-new-comment-line)
3065 ; (let ((spacep (memq (char-before (point)) '(?\ ?\t))))
3066 ; (funcall comment-line-break-function)
3067 ; ;; if user type space explicitly, leave SPC
3068 ; ;; even if there is no WAN.
3071 ; (goto-char fill-point)
3072 ; ;; put SPC except that there is SPC
3073 ; ;; already or there is sentence end.
3074 ; (or (memq (char-after (point)) '(?\ ?\t))
3075 ; (fill-end-of-sentence-p)
3078 (goto-char fill-point)
3079 (funcall comment-line-break-function)))
3080 ;; If making the new line didn't reduce the hpos of
3081 ;; the end of the line, then give up now;
3082 ;; trying again will not help.
3083 (if (>= (current-column) prev-column)
3085 ;; No place to break => stop trying.
3086 (setq give-up t)))))))
3088 ;; Put FSF one in until I can one or the other working properly, then the
3089 ;; other one is history.
3090 ;(defun fsf:do-auto-fill ()
3094 ; (fill-prefix fill-prefix))
3095 ; (if (or (not (setq justify (current-justification)))
3096 ; (null (setq fc (current-fill-column)))
3097 ; (and (eq justify 'left)
3098 ; (<= (current-column) fc))
3099 ; (save-excursion (beginning-of-line)
3100 ; ;; (setq bol (point))
3101 ; (and auto-fill-inhibit-regexp
3102 ; (looking-at auto-fill-inhibit-regexp))))
3103 ; nil ;; Auto-filling not required
3104 ; (if (memq justify '(full center right))
3105 ; (save-excursion (unjustify-current-line)))
3107 ; ;; Choose a fill-prefix automatically.
3108 ; (if (and adaptive-fill-mode
3109 ; (or (null fill-prefix) (string= fill-prefix "")))
3111 ; (fill-context-prefix
3112 ; (save-excursion (backward-paragraph 1) (point))
3113 ; (save-excursion (forward-paragraph 1) (point))
3114 ; ;; Don't accept a non-whitespace fill prefix
3115 ; ;; from the first line of a paragraph.
3117 ; (and prefix (not (equal prefix ""))
3118 ; (setq fill-prefix prefix))))
3120 ; (while (and (not give-up) (> (current-column) fc))
3121 ; ;; Determine where to split the line.
3123 ; (let ((opoint (point))
3127 ; (move-to-column (1+ fc))
3128 ; ;; Move back to a word boundary.
3130 ; ;; If this is after period and a single space,
3131 ; ;; move back once more--we don't want to break
3132 ; ;; the line there and make it look like a
3136 ; sentence-end-double-space
3137 ; (save-excursion (backward-char 1)
3138 ; (and (looking-at "\\. ")
3139 ; (not (looking-at "\\. "))))))
3141 ; (skip-chars-backward "^ \t\n")
3142 ; ;; If we find nowhere on the line to break it,
3143 ; ;; break after one word. Set bounce to t
3144 ; ;; so we will not keep going in this while loop.
3147 ; (re-search-forward "[ \t]" opoint t)
3149 ; (skip-chars-backward " \t"))
3150 ; ;; Let fill-point be set to the place where we end up.
3152 ; ;; If that place is not the beginning of the line,
3153 ; ;; break the line there.
3154 ; (if (save-excursion
3155 ; (goto-char fill-point)
3157 ; (let ((prev-column (current-column)))
3158 ; ;; If point is at the fill-point, do not `save-excursion'.
3159 ; ;; Otherwise, if a comment prefix or fill-prefix is inserted,
3160 ; ;; point will end up before it rather than after it.
3161 ; (if (save-excursion
3162 ; (skip-chars-backward " \t")
3163 ; (= (point) fill-point))
3164 ; (funcall comment-line-break-function t)
3166 ; (goto-char fill-point)
3167 ; (funcall comment-line-break-function t)))
3168 ; ;; Now do justification, if required
3169 ; (if (not (eq justify 'left))
3172 ; (justify-current-line justify nil t)))
3173 ; ;; If making the new line didn't reduce the hpos of
3174 ; ;; the end of the line, then give up now;
3175 ; ;; trying again will not help.
3176 ; (if (>= (current-column) prev-column)
3177 ; (setq give-up t)))
3178 ; ;; No place to break => stop trying.
3179 ; (setq give-up t))))
3180 ; ;; Justify last line.
3181 ; (justify-current-line justify t t)
3184 (defvar normal-auto-fill-function 'do-auto-fill
3185 "The function to use for `auto-fill-function' if Auto Fill mode is turned on.
3186 Some major modes set this.")
3188 (defun auto-fill-mode (&optional arg)
3189 "Toggle auto-fill mode.
3190 With arg, turn auto-fill mode on if and only if arg is positive.
3191 In Auto-Fill mode, inserting a space at a column beyond `current-fill-column'
3192 automatically breaks the line at a previous space.
3194 The value of `normal-auto-fill-function' specifies the function to use
3195 for `auto-fill-function' when turning Auto Fill mode on."
3197 (prog1 (setq auto-fill-function
3199 (not auto-fill-function)
3200 (> (prefix-numeric-value arg) 0))
3201 normal-auto-fill-function
3205 ;; This holds a document string used to document auto-fill-mode.
3206 (defun auto-fill-function ()
3207 "Automatically break line at a previous space, in insertion of text."
3210 (defun turn-on-auto-fill ()
3211 "Unconditionally turn on Auto Fill mode."
3215 (defun set-fill-column (arg)
3216 "Set `fill-column' to specified argument.
3217 Just \\[universal-argument] as argument means to use the current column
3218 The variable `fill-column' has a separate value for each buffer."
3219 (interactive "_P") ; XEmacs
3220 (cond ((integerp arg)
3221 (setq fill-column arg))
3223 (setq fill-column (current-column)))
3224 ;; Disallow missing argument; it's probably a typo for C-x C-f.
3226 (error "set-fill-column requires an explicit argument")))
3227 (lmessage 'command "fill-column set to %d" fill-column))
3229 (defcustom comment-multi-line t ; XEmacs - this works well with adaptive fill
3230 "*Non-nil means \\[indent-new-comment-line] should continue same comment
3231 on new line, with no new terminator or starter.
3232 This is obsolete because you might as well use \\[newline-and-indent]."
3234 :group 'fill-comments)
3236 (defun indent-new-comment-line (&optional soft)
3237 "Break line at point and indent, continuing comment if within one.
3238 This indents the body of the continued comment
3239 under the previous comment line.
3241 This command is intended for styles where you write a comment per line,
3242 starting a new comment (and terminating it if necessary) on each line.
3243 If you want to continue one comment across several lines, use \\[newline-and-indent].
3245 If a fill column is specified, it overrides the use of the comment column
3246 or comment indentation.
3248 The inserted newline is marked hard if `use-hard-newlines' is true,
3249 unless optional argument SOFT is non-nil."
3251 (let (comcol comstart)
3252 (skip-chars-backward " \t")
3253 ;; 97/3/14 jhod: Kinsoku processing
3254 (if (featurep 'mule)
3256 (delete-region (point)
3257 (progn (skip-chars-forward " \t")
3259 (if soft (insert ?\n) (newline 1))
3262 (indent-to-left-margin)
3263 (insert fill-prefix))
3264 ;; #### - Eric Eide reverts to v18 semantics for this function in
3265 ;; fa-extras, which I'm not gonna do. His changes are to (1) execute
3266 ;; the save-excursion below unconditionally, and (2) uncomment the check
3267 ;; for (not comment-multi-line) further below. --Stig
3268 ;;#### jhod: probably need to fix this for kinsoku processing
3269 (if (not comment-multi-line)
3271 (if (and comment-start-skip
3272 (let ((opoint (point)))
3274 (re-search-forward comment-start-skip opoint t)))
3275 ;; The old line is a comment.
3276 ;; Set WIN to the pos of the comment-start.
3277 ;; But if the comment is empty, look at preceding lines
3278 ;; to find one that has a nonempty comment.
3280 ;; If comment-start-skip contains a \(...\) pair,
3281 ;; the real comment delimiter starts at the end of that pair.
3282 (let ((win (or (match-end 1) (match-beginning 0))))
3283 (while (and (eolp) (not (bobp))
3286 (setq opoint (point))
3288 (re-search-forward comment-start-skip opoint t)))
3289 (setq win (or (match-end 1) (match-beginning 0))))
3290 ;; Indent this line like what we found.
3292 (setq comcol (current-column))
3294 (buffer-substring (point) (match-end 0)))))))
3295 (if (and comcol (not fill-prefix)) ; XEmacs - (ENE) from fa-extras.
3296 (let ((comment-column comcol)
3297 (comment-start comstart)
3298 (block-comment-start comstart)
3299 (comment-end comment-end))
3300 (and comment-end (not (equal comment-end ""))
3301 ; (if (not comment-multi-line)
3304 (insert comment-end)
3306 ; (setq comment-column (+ comment-column (length comment-start))
3311 (setq comment-end ""))
3314 (indent-for-comment)
3316 ;; Make sure we delete the newline inserted above.
3319 (indent-according-to-mode)))))
3322 (defun set-selective-display (arg)
3323 "Set `selective-display' to ARG; clear it if no arg.
3324 When the value of `selective-display' is a number > 0,
3325 lines whose indentation is >= that value are not displayed.
3326 The variable `selective-display' has a separate value for each buffer."
3328 (if (eq selective-display t)
3329 (error "selective-display already in use for marked lines"))
3332 (narrow-to-region (point-min) (point))
3333 (goto-char (window-start))
3334 (vertical-motion (window-height)))))
3335 (setq selective-display
3336 (and arg (prefix-numeric-value arg)))
3337 (recenter current-vpos))
3338 (set-window-start (selected-window) (window-start (selected-window)))
3339 ;; #### doesn't localize properly:
3340 (princ "selective-display set to " t)
3341 (prin1 selective-display t)
3345 (defun nuke-selective-display ()
3346 "Ensure that the buffer is not in selective-display mode.
3347 If `selective-display' is t, then restore the buffer text to its original
3348 state before disabling selective display."
3349 ;; by Stig@hackvan.com
3351 (and (eq t selective-display)
3355 (goto-char (point-min))
3356 (let ((mod-p (buffer-modified-p))
3357 (buffer-read-only nil))
3358 (while (search-forward "\r" nil t)
3361 (set-buffer-modified-p mod-p)
3363 (setq selective-display nil))
3365 (add-hook 'change-major-mode-hook 'nuke-selective-display)
3367 (defconst overwrite-mode-textual " Ovwrt"
3368 "The string displayed in the mode line when in overwrite mode.")
3369 (defconst overwrite-mode-binary " Bin Ovwrt"
3370 "The string displayed in the mode line when in binary overwrite mode.")
3372 (defun overwrite-mode (arg)
3373 "Toggle overwrite mode.
3374 With arg, enable overwrite mode if arg is positive, else disable.
3375 In overwrite mode, printing characters typed in replace existing text
3376 on a one-for-one basis, rather than pushing it to the right. At the
3377 end of a line, such characters extend the line. Before a tab,
3378 such characters insert until the tab is filled in.
3379 \\[quoted-insert] still inserts characters in overwrite mode; this
3380 is supposed to make it easier to insert characters when necessary."
3382 (setq overwrite-mode
3383 (if (if (null arg) (not overwrite-mode)
3384 (> (prefix-numeric-value arg) 0))
3385 'overwrite-mode-textual))
3388 (defun binary-overwrite-mode (arg)
3389 "Toggle binary overwrite mode.
3390 With arg, enable binary overwrite mode if arg is positive, else disable.
3391 In binary overwrite mode, printing characters typed in replace
3392 existing text. Newlines are not treated specially, so typing at the
3393 end of a line joins the line to the next, with the typed character
3394 between them. Typing before a tab character simply replaces the tab
3395 with the character typed.
3396 \\[quoted-insert] replaces the text at the cursor, just as ordinary
3397 typing characters do.
3399 Note that binary overwrite mode is not its own minor mode; it is a
3400 specialization of overwrite-mode, entered by setting the
3401 `overwrite-mode' variable to `overwrite-mode-binary'."
3403 (setq overwrite-mode
3405 (not (eq overwrite-mode 'overwrite-mode-binary))
3406 (> (prefix-numeric-value arg) 0))
3407 'overwrite-mode-binary))
3410 (defcustom line-number-mode nil
3411 "*Non-nil means display line number in modeline."
3413 :group 'editing-basics)
3415 (defun line-number-mode (arg)
3416 "Toggle Line Number mode.
3417 With arg, enable Line Number mode if arg is positive, else disable.
3418 When Line Number mode is enabled, the line number appears
3421 (setq line-number-mode
3422 (if (null arg) (not line-number-mode)
3423 (> (prefix-numeric-value arg) 0)))
3426 (defcustom column-number-mode nil
3427 "*Non-nil means display column number in mode line."
3429 :group 'editing-basics)
3431 (defun column-number-mode (arg)
3432 "Toggle Column Number mode.
3433 With arg, enable Column Number mode if arg is positive, else disable.
3434 When Column Number mode is enabled, the column number appears
3437 (setq column-number-mode
3438 (if (null arg) (not column-number-mode)
3439 (> (prefix-numeric-value arg) 0)))
3443 (defcustom blink-matching-paren t
3444 "*Non-nil means show matching open-paren when close-paren is inserted."
3446 :group 'paren-blinking)
3448 (defcustom blink-matching-paren-on-screen t
3449 "*Non-nil means show matching open-paren when it is on screen.
3450 nil means don't show it (but the open-paren can still be shown
3451 when it is off screen."
3453 :group 'paren-blinking)
3455 (defcustom blink-matching-paren-distance 12000
3456 "*If non-nil, is maximum distance to search for matching open-paren."
3457 :type '(choice integer (const nil))
3458 :group 'paren-blinking)
3460 (defcustom blink-matching-delay 1
3461 "*The number of seconds that `blink-matching-open' will delay at a match."
3463 :group 'paren-blinking)
3465 (defcustom blink-matching-paren-dont-ignore-comments nil
3466 "*Non-nil means `blink-matching-paren' should not ignore comments."
3468 :group 'paren-blinking)
3470 (defun blink-matching-open ()
3471 "Move cursor momentarily to the beginning of the sexp before point."
3472 (interactive "_") ; XEmacs
3473 (and (> (point) (1+ (point-min)))
3474 blink-matching-paren
3475 ;; Verify an even number of quoting characters precede the close.
3476 (= 1 (logand 1 (- (point)
3479 (skip-syntax-backward "/\\")
3481 (let* ((oldpos (point))
3486 (if blink-matching-paren-distance
3487 (narrow-to-region (max (point-min)
3488 (- (point) blink-matching-paren-distance))
3491 (let ((parse-sexp-ignore-comments
3492 (and parse-sexp-ignore-comments
3493 (not blink-matching-paren-dont-ignore-comments))))
3494 (setq blinkpos (scan-sexps oldpos -1)))
3497 (/= (char-syntax (char-after blinkpos))
3500 (or (null (matching-paren (char-after blinkpos)))
3501 (/= (char-after (1- oldpos))
3502 (matching-paren (char-after blinkpos))))))
3503 (if mismatch (setq blinkpos nil))
3506 (goto-char blinkpos)
3507 (if (pos-visible-in-window-p)
3508 (and blink-matching-paren-on-screen
3510 (auto-show-make-point-visible)
3511 (sit-for blink-matching-delay)))
3512 (goto-char blinkpos)
3513 (lmessage 'command "Matches %s"
3514 ;; Show what precedes the open in its line, if anything.
3516 (skip-chars-backward " \t")
3518 (buffer-substring (progn (beginning-of-line) (point))
3520 ;; Show what follows the open in its line, if anything.
3523 (skip-chars-forward " \t")
3525 (buffer-substring blinkpos
3526 (progn (end-of-line) (point)))
3527 ;; Otherwise show the previous nonblank line,
3530 (skip-chars-backward "\n \t")
3533 (buffer-substring (progn
3534 (skip-chars-backward "\n \t")
3537 (progn (end-of-line)
3538 (skip-chars-backward " \t")
3540 ;; Replace the newline and other whitespace with `...'.
3542 (buffer-substring blinkpos (1+ blinkpos)))
3543 ;; There is nothing to show except the char itself.
3544 (buffer-substring blinkpos (1+ blinkpos))))))))
3546 (display-message 'no-log "Mismatched parentheses"))
3547 ((not blink-matching-paren-distance)
3548 (display-message 'no-log "Unmatched parenthesis"))))))))
3550 ;Turned off because it makes dbx bomb out.
3551 (setq blink-paren-function 'blink-matching-open)
3554 ;; XEmacs: Some functions moved to cmdloop.el:
3556 ;; buffer-quit-function
3557 ;; keyboard-escape-quit
3559 (defun assoc-ignore-case (key alist)
3560 "Like `assoc', but assumes KEY is a string and ignores case when comparing."
3561 (setq key (downcase key))
3563 (while (and alist (not element))
3564 (if (equal key (downcase (car (car alist))))
3565 (setq element (car alist)))
3566 (setq alist (cdr alist)))
3570 ;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;
3571 ;; mail composition code ;;
3572 ;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;
3574 (defcustom mail-user-agent 'sendmail-user-agent
3575 "*Your preference for a mail composition package.
3576 Various Emacs Lisp packages (e.g. reporter) require you to compose an
3577 outgoing email message. This variable lets you specify which
3578 mail-sending package you prefer.
3580 Valid values include:
3582 sendmail-user-agent -- use the default Emacs Mail package
3583 mh-e-user-agent -- use the Emacs interface to the MH mail system
3584 message-user-agent -- use the GNUS mail sending package
3586 Additional valid symbols may be available; check with the author of
3587 your package for details."
3588 :type '(radio (function-item :tag "Default Emacs mail"
3590 sendmail-user-agent)
3591 (function-item :tag "Gnus mail sending package"
3594 (function :tag "Other"))
3597 (defun define-mail-user-agent (symbol composefunc sendfunc
3598 &optional abortfunc hookvar)
3599 "Define a symbol to identify a mail-sending package for `mail-user-agent'.
3601 SYMBOL can be any Lisp symbol. Its function definition and/or
3602 value as a variable do not matter for this usage; we use only certain
3603 properties on its property list, to encode the rest of the arguments.
3605 COMPOSEFUNC is program callable function that composes an outgoing
3606 mail message buffer. This function should set up the basics of the
3607 buffer without requiring user interaction. It should populate the
3608 standard mail headers, leaving the `to:' and `subject:' headers blank
3611 COMPOSEFUNC should accept several optional arguments--the same
3612 arguments that `compose-mail' takes. See that function's documentation.
3614 SENDFUNC is the command a user would run to send the message.
3616 Optional ABORTFUNC is the command a user would run to abort the
3617 message. For mail packages that don't have a separate abort function,
3618 this can be `kill-buffer' (the equivalent of omitting this argument).
3620 Optional HOOKVAR is a hook variable that gets run before the message
3621 is actually sent. Callers that use the `mail-user-agent' may
3622 install a hook function temporarily on this hook variable.
3623 If HOOKVAR is nil, `mail-send-hook' is used.
3625 The properties used on SYMBOL are `composefunc', `sendfunc',
3626 `abortfunc', and `hookvar'."
3627 (put symbol 'composefunc composefunc)
3628 (put symbol 'sendfunc sendfunc)
3629 (put symbol 'abortfunc (or abortfunc 'kill-buffer))
3630 (put symbol 'hookvar (or hookvar 'mail-send-hook)))
3632 (define-mail-user-agent 'sendmail-user-agent
3633 'sendmail-user-agent-compose 'mail-send-and-exit)
3635 (define-mail-user-agent 'message-user-agent
3636 'message-mail 'message-send-and-exit
3637 'message-kill-buffer 'message-send-hook)
3639 (defun sendmail-user-agent-compose (&optional to subject other-headers continue
3640 switch-function yank-action
3643 (let ((special-display-buffer-names nil)
3644 (special-display-regexps nil)
3645 (same-window-buffer-names nil)
3646 (same-window-regexps nil))
3647 (funcall switch-function "*mail*")))
3648 (let ((cc (cdr (assoc-ignore-case "cc" other-headers)))
3649 (in-reply-to (cdr (assoc-ignore-case "in-reply-to" other-headers))))
3650 (or (mail continue to subject in-reply-to cc yank-action send-actions)
3652 (error "Message aborted"))
3654 (goto-char (point-min))
3655 (search-forward mail-header-separator)
3657 (while other-headers
3658 (if (not (member (car (car other-headers)) '("in-reply-to" "cc")))
3659 (insert (car (car other-headers)) ": "
3660 (cdr (car other-headers)) "\n"))
3661 (setq other-headers (cdr other-headers)))
3664 (define-mail-user-agent 'mh-e-user-agent
3665 'mh-user-agent-compose 'mh-send-letter 'mh-fully-kill-draft
3666 'mh-before-send-letter-hook)
3668 (defun compose-mail (&optional to subject other-headers continue
3669 switch-function yank-action send-actions)
3670 "Start composing a mail message to send.
3671 This uses the user's chosen mail composition package
3672 as selected with the variable `mail-user-agent'.
3673 The optional arguments TO and SUBJECT specify recipients
3674 and the initial Subject field, respectively.
3676 OTHER-HEADERS is an alist specifying additional
3677 header fields. Elements look like (HEADER . VALUE) where both
3678 HEADER and VALUE are strings.
3680 CONTINUE, if non-nil, says to continue editing a message already
3683 SWITCH-FUNCTION, if non-nil, is a function to use to
3684 switch to and display the buffer used for mail composition.
3686 YANK-ACTION, if non-nil, is an action to perform, if and when necessary,
3687 to insert the raw text of the message being replied to.
3688 It has the form (FUNCTION . ARGS). The user agent will apply
3689 FUNCTION to ARGS, to insert the raw text of the original message.
3690 \(The user agent will also run `mail-citation-hook', *after* the
3691 original text has been inserted in this way.)
3693 SEND-ACTIONS is a list of actions to call when the message is sent.
3694 Each action has the form (FUNCTION . ARGS)."
3696 (list nil nil nil current-prefix-arg))
3697 (let ((function (get mail-user-agent 'composefunc)))
3698 (funcall function to subject other-headers continue
3699 switch-function yank-action send-actions)))
3701 (defun compose-mail-other-window (&optional to subject other-headers continue
3702 yank-action send-actions)
3703 "Like \\[compose-mail], but edit the outgoing message in another window."
3705 (list nil nil nil current-prefix-arg))
3706 (compose-mail to subject other-headers continue
3707 'switch-to-buffer-other-window yank-action send-actions))
3710 (defun compose-mail-other-frame (&optional to subject other-headers continue
3711 yank-action send-actions)
3712 "Like \\[compose-mail], but edit the outgoing message in another frame."
3714 (list nil nil nil current-prefix-arg))
3715 (compose-mail to subject other-headers continue
3716 'switch-to-buffer-other-frame yank-action send-actions))
3719 ;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;
3721 ;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;
3723 (defun set-variable (var val)
3724 "Set VARIABLE to VALUE. VALUE is a Lisp object.
3725 When using this interactively, supply a Lisp expression for VALUE.
3726 If you want VALUE to be a string, you must surround it with doublequotes.
3727 If VARIABLE is a specifier, VALUE is added to it as an instantiator in
3728 the 'global locale with nil tag set (see `set-specifier').
3730 If VARIABLE has a `variable-interactive' property, that is used as if
3731 it were the arg to `interactive' (which see) to interactively read the value."
3733 (let* ((var (read-variable "Set variable: "))
3734 ;; #### - yucky code replication here. This should use something
3735 ;; from help.el or hyper-apropos.el
3738 (with-output-to-temp-buffer "*Help*"
3740 (princ "\nDocumentation:\n")
3741 (princ (substring (documentation-property var 'variable-documentation)
3744 (let ((print-length 20))
3745 (princ "\n\nCurrent value: ")
3746 (prin1 (symbol-value var))))
3748 (set-buffer standard-output)
3751 (minibuffer-help-form
3754 (let ((prop (get var 'variable-interactive)))
3756 ;; Use VAR's `variable-interactive' property
3757 ;; as an interactive spec for prompting.
3758 (call-interactively (list 'lambda '(arg)
3759 (list 'interactive prop)
3761 (eval-minibuffer (format "Set %s to value: " var)))))))
3762 (if (and (boundp var) (specifierp (symbol-value var)))
3763 (set-specifier (symbol-value var) val)
3767 ;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;
3768 ;; case changing code ;;
3769 ;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;
3771 ;; A bunch of stuff was moved elsewhere:
3772 ;; completion-list-mode-map
3773 ;; completion-reference-buffer
3774 ;; completion-base-size
3775 ;; delete-completion-window
3776 ;; previous-completion
3778 ;; choose-completion
3779 ;; choose-completion-delete-max-match
3780 ;; choose-completion-string
3781 ;; completion-list-mode
3782 ;; completion-fixup-function
3783 ;; completion-setup-function
3784 ;; switch-to-completions
3788 ;; The rest of this file is not in Lisp in FSF
3789 (defun capitalize-region-or-word (arg)
3790 "Capitalize the selected region or the following word (or ARG words)."
3792 (if (region-active-p)
3793 (capitalize-region (region-beginning) (region-end))
3794 (capitalize-word arg)))
3796 (defun upcase-region-or-word (arg)
3797 "Upcase the selected region or the following word (or ARG words)."
3799 (if (region-active-p)
3800 (upcase-region (region-beginning) (region-end))
3803 (defun downcase-region-or-word (arg)
3804 "Downcase the selected region or the following word (or ARG words)."
3806 (if (region-active-p)
3807 (downcase-region (region-beginning) (region-end))
3808 (downcase-word arg)))
3810 ;; #### not localized
3811 (defvar uncapitalized-title-words
3812 '("the" "a" "an" "in" "of" "for" "to" "and" "but" "at" "on" "as" "by"))
3814 (defvar uncapitalized-title-word-regexp
3815 (concat "[ \t]*\\(" (mapconcat #'identity uncapitalized-title-words "\\|")
3818 (defun capitalize-string-as-title (string)
3819 "Capitalize the words in the string, except for small words (as in titles).
3820 The words not capitalized are specified in `uncapitalized-title-words'."
3821 (let ((buffer (get-buffer-create " *capitalize-string-as-title*")))
3824 (insert-string string buffer)
3825 (capitalize-region-as-title 1 (point-max buffer) buffer)
3826 (buffer-string buffer))
3827 (kill-buffer buffer))))
3829 (defun capitalize-region-as-title (b e &optional buffer)
3830 "Capitalize the words in the region, except for small words (as in titles).
3831 The words not capitalized are specified in `uncapitalized-title-words'."
3835 (set-buffer buffer))
3837 (narrow-to-region b e)
3838 (goto-char (point-min))
3840 (while (< (point) (point-max))
3842 (not (looking-at uncapitalized-title-word-regexp)))
3845 (setq first nil))))))
3848 ;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;
3849 ;; zmacs active region code ;;
3850 ;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;
3852 ;; Most of the zmacs code is now in elisp. The only thing left in C
3853 ;; are the variables zmacs-regions, zmacs-region-active-p and
3854 ;; zmacs-region-stays plus the function zmacs_update_region which
3855 ;; simply calls the lisp level zmacs-update-region. It must remain
3856 ;; for convenience, since it is called by core C code.
3859 (defun activate-region ()
3860 "Activate the region, if `zmacs-regions' is true.
3861 Setting `zmacs-regions' to true causes LISPM-style active regions to be used.
3862 This function has no effect if `zmacs-regions' is false."
3864 (and zmacs-regions (zmacs-activate-region)))
3867 (defsubst region-exists-p ()
3868 "Return t if the region exists.
3869 If active regions are in use (i.e. `zmacs-regions' is true), this means that
3870 the region is active. Otherwise, this means that the user has pushed
3871 a mark in this buffer at some point in the past.
3872 The functions `region-beginning' and `region-end' can be used to find the
3873 limits of the region."
3874 (not (null (mark))))
3877 (defun region-active-p ()
3878 "Return non-nil if the region is active.
3879 If `zmacs-regions' is true, this is equivalent to `region-exists-p'.
3880 Otherwise, this function always returns false."
3881 (and zmacs-regions zmacs-region-extent))
3883 (defvar zmacs-activate-region-hook nil
3884 "Function or functions called when the region becomes active;
3885 see the variable `zmacs-regions'.")
3887 (defvar zmacs-deactivate-region-hook nil
3888 "Function or functions called when the region becomes inactive;
3889 see the variable `zmacs-regions'.")
3891 (defvar zmacs-update-region-hook nil
3892 "Function or functions called when the active region changes.
3893 This is called after each command that sets `zmacs-region-stays' to t.
3894 See the variable `zmacs-regions'.")
3896 (defvar zmacs-region-extent nil
3897 "The extent of the zmacs region; don't use this.")
3899 (defvar zmacs-region-rectangular-p nil
3900 "Whether the zmacs region is a rectangle; don't use this.")
3902 (defun zmacs-make-extent-for-region (region)
3903 ;; Given a region, this makes an extent in the buffer which holds that
3904 ;; region, for highlighting purposes. If the region isn't associated
3905 ;; with a buffer, this does nothing.
3907 (valid (and (extentp zmacs-region-extent)
3908 (extent-object zmacs-region-extent)
3909 (buffer-live-p (extent-object zmacs-region-extent))))
3911 (cond ((consp region)
3912 (setq start (min (car region) (cdr region))
3913 end (max (car region) (cdr region))
3915 (eq (marker-buffer (car region))
3916 (extent-object zmacs-region-extent)))
3917 buffer (marker-buffer (car region))))
3919 (signal 'error (list "Invalid region" region))))
3923 ;; The condition case is in case any of the extents are dead or
3924 ;; otherwise incapacitated.
3926 (if (listp zmacs-region-extent)
3927 (mapc 'delete-extent zmacs-region-extent)
3928 (delete-extent zmacs-region-extent))
3932 (set-extent-endpoints zmacs-region-extent start end)
3933 (setq zmacs-region-extent (make-extent start end buffer))
3935 ;; Make the extent be closed on the right, which means that if
3936 ;; characters are inserted exactly at the end of the extent, the
3937 ;; extent will grow to cover them. This is important for shell
3938 ;; buffers - suppose one makes a region, and one end is at point-max.
3939 ;; If the shell produces output, that marker will remain at point-max
3940 ;; (its position will increase). So it's important that the extent
3941 ;; exhibit the same behavior, lest the region covered by the extent
3942 ;; (the visual indication), and the region between point and mark
3943 ;; (the actual region value) become different!
3944 (set-extent-property zmacs-region-extent 'end-open nil)
3946 ;; use same priority as mouse-highlighting so that conflicts between
3947 ;; the region extent and a mouse-highlighted extent are resolved by
3948 ;; the usual size-and-endpoint-comparison method.
3949 (set-extent-priority zmacs-region-extent mouse-highlight-priority)
3950 (set-extent-face zmacs-region-extent 'zmacs-region)
3952 ;; #### It might be better to actually break
3953 ;; default-mouse-track-next-move-rect out of mouse.el so that we
3954 ;; can use its logic here.
3956 (zmacs-region-rectangular-p
3957 (setq zmacs-region-extent (list zmacs-region-extent))
3958 (default-mouse-track-next-move-rect start end zmacs-region-extent)
3961 zmacs-region-extent)))
3963 (defun zmacs-region-buffer ()
3964 "Return the buffer containing the zmacs region, or nil."
3965 ;; #### this is horrible and kludgy! This stuff needs to be rethought.
3966 (and zmacs-regions zmacs-region-active-p
3967 (or (marker-buffer (mark-marker t))
3968 (and (extent-live-p zmacs-region-extent)
3969 (buffer-live-p (extent-object zmacs-region-extent))
3970 (extent-object zmacs-region-extent)))))
3972 (defun zmacs-activate-region ()
3973 "Make the region between `point' and `mark' be active (highlighted),
3974 if `zmacs-regions' is true. Only a very small number of commands
3975 should ever do this. Calling this function will call the hook
3976 `zmacs-activate-region-hook', if the region was previously inactive.
3977 Calling this function ensures that the region stays active after the
3978 current command terminates, even if `zmacs-region-stays' is not set.
3979 Returns t if the region was activated (i.e. if `zmacs-regions' if t)."
3980 (if (not zmacs-regions)
3982 (setq zmacs-region-active-p t
3983 zmacs-region-stays t
3984 zmacs-region-rectangular-p (and (boundp 'mouse-track-rectangle-p)
3985 mouse-track-rectangle-p))
3986 (if (marker-buffer (mark-marker t))
3987 (zmacs-make-extent-for-region (cons (point-marker t) (mark-marker t))))
3988 (run-hooks 'zmacs-activate-region-hook)
3991 (defun zmacs-deactivate-region ()
3992 "Make the region between `point' and `mark' no longer be active,
3993 if `zmacs-regions' is true. You shouldn't need to call this; the
3994 command loop calls it when appropriate. Calling this function will
3995 call the hook `zmacs-deactivate-region-hook', if the region was
3996 previously active. Returns t if the region had been active, nil
3998 (if (not zmacs-region-active-p)
4000 (setq zmacs-region-active-p nil
4001 zmacs-region-stays nil
4002 zmacs-region-rectangular-p nil)
4003 (if zmacs-region-extent
4004 (let ((inhibit-quit t))
4005 (if (listp zmacs-region-extent)
4006 (mapc 'delete-extent zmacs-region-extent)
4007 (delete-extent zmacs-region-extent))
4008 (setq zmacs-region-extent nil)))
4009 (run-hooks 'zmacs-deactivate-region-hook)
4012 (defun zmacs-update-region ()
4013 "Update the highlighted region between `point' and `mark'.
4014 You shouldn't need to call this; the command loop calls it
4015 when appropriate. Calling this function will call the hook
4016 `zmacs-update-region-hook', if the region is active."
4017 (when zmacs-region-active-p
4018 (when (marker-buffer (mark-marker t))
4019 (zmacs-make-extent-for-region (cons (point-marker t)
4021 (run-hooks 'zmacs-update-region-hook)))
4024 ;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;
4025 ;; message logging code ;;
4026 ;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;
4028 ;;; #### Should this be moved to a separate file, for clarity?
4031 ;;; The `message-stack' is an alist of labels with messages; the first
4032 ;;; message in this list is always in the echo area. A call to
4033 ;;; `display-message' inserts a label/message pair at the head of the
4034 ;;; list, and removes any other pairs with that label. Calling
4035 ;;; `clear-message' causes any pair with matching label to be removed,
4036 ;;; and this may cause the displayed message to change or vanish. If
4037 ;;; the label arg is nil, the entire message stack is cleared.
4039 ;;; Message/error filtering will be a little tricker to implement than
4040 ;;; logging, since messages can be built up incrementally
4041 ;;; using clear-message followed by repeated calls to append-message
4042 ;;; (this happens with error messages). For messages which aren't
4043 ;;; created this way, filtering could be implemented at display-message
4046 ;;; Bits of the logging code are borrowed from log-messages.el by
4047 ;;; Robert Potter (rpotter@grip.cis.upenn.edu).
4049 ;; need this to terminate the currently-displayed message
4050 ;; ("Loading simple ...")
4052 (not (fboundp 'display-message))
4053 (not (featurep 'debug)))
4054 (send-string-to-terminal "\n"))
4056 (defvar message-stack nil
4057 "An alist of label/string pairs representing active echo-area messages.
4058 The first element in the list is currently displayed in the echo area.
4059 Do not modify this directly--use the `message' or
4060 `display-message'/`clear-message' functions.")
4062 (defvar remove-message-hook 'log-message
4063 "A function or list of functions to be called when a message is removed
4064 from the echo area at the bottom of the frame. The label of the removed
4065 message is passed as the first argument, and the text of the message
4066 as the second argument.")
4068 (defcustom log-message-max-size 50000
4069 "Maximum size of the \" *Message-Log*\" buffer. See `log-message'."
4071 :group 'log-message)
4072 (make-compatible-variable 'message-log-max 'log-message-max-size)
4074 ;; We used to reject quite a lot of stuff here, but it was a bad idea,
4077 ;; a) In most circumstances, you *want* to see the message in the log.
4078 ;; The explicitly non-loggable messages should be marked as such by
4079 ;; the issuer. Gratuitous non-displaying of random regexps made
4080 ;; debugging harder, too (because various reasonable debugging
4081 ;; messages would get eaten).
4083 ;; b) It slowed things down. Yes, visibly.
4085 ;; So, I left only a few of the really useless ones on this kill-list.
4088 (defcustom log-message-ignore-regexps
4089 '(;; Note: adding entries to this list slows down messaging
4090 ;; significantly. Wherever possible, use message labels.
4092 ;; Often-seen messages
4093 "\\`\\'" ; empty message
4094 "\\`\\(Beginning\\|End\\) of buffer\\'"
4097 ;; Many packages print this -- impossible to categorize
4098 ;;"^Making completion list"
4100 ;; "^No news is no news$"
4101 ;; "^No more\\( unread\\)? newsgroups$"
4102 ;; "^Opening [^ ]+ server\\.\\.\\."
4103 ;; "^[^:]+: Reading incoming mail"
4104 ;; "^Getting mail from "
4105 ;; "^\\(Generating Summary\\|Sorting threads\\|Making sparse threads\\|Scoring\\|Checking new news\\|Expiring articles\\|Sending\\)\\.\\.\\."
4106 ;; "^\\(Fetching headers for\\|Retrieving newsgroup\\|Reading active file\\)"
4107 ;; "^No more\\( unread\\)? articles"
4108 ;; "^Deleting article "
4110 ;; "^Parsed [0-9]+ of [0-9]+ ([0-9]+%)"
4112 "List of regular expressions matching messages which shouldn't be logged.
4115 Ideally, packages which generate messages which might need to be ignored
4116 should label them with 'progress, 'prompt, or 'no-log, so they can be
4117 filtered by the log-message-ignore-labels."
4118 :type '(repeat regexp)
4119 :group 'log-message)
4121 (defcustom log-message-ignore-labels
4122 '(help-echo command progress prompt no-log garbage-collecting auto-saving)
4123 "List of symbols indicating labels of messages which shouldn't be logged.
4124 See `display-message' for some common labels. See also `log-message'."
4125 :type '(repeat (symbol :tag "Label"))
4126 :group 'log-message)
4128 ;;Subsumed by view-lossage
4129 ;; Not really, I'm adding it back by popular demand. -slb
4130 (defun show-message-log ()
4131 "Show the \" *Message-Log*\" buffer, which contains old messages and errors."
4133 (pop-to-buffer (get-buffer-create " *Message-Log*")))
4135 (defvar log-message-filter-function 'log-message-filter
4136 "Value must be a function of two arguments: a symbol (label) and
4137 a string (message). It should return non-nil to indicate a message
4138 should be logged. Possible values include 'log-message-filter and
4139 'log-message-filter-errors-only.")
4141 (defun log-message-filter (label message)
4142 "Default value of `log-message-filter-function'.
4143 Messages whose text matches one of the `log-message-ignore-regexps'
4144 or whose label appears in `log-message-ignore-labels' are not saved."
4145 (let ((r log-message-ignore-regexps)
4146 (ok (not (memq label log-message-ignore-labels))))
4149 (when (string-match (car r) message)
4154 (defun log-message-filter-errors-only (label message)
4155 "For use as the `log-message-filter-function'. Only logs error messages."
4158 (defun log-message (label message)
4159 "Stuff a copy of the message into the \" *Message-Log*\" buffer,
4160 if it satisfies the `log-message-filter-function'.
4162 For use on `remove-message-hook'."
4163 (when (and (not noninteractive)
4164 (funcall log-message-filter-function label message))
4165 ;; Use save-excursion rather than save-current-buffer because we
4166 ;; change the value of point.
4168 (set-buffer (get-buffer-create " *Message-Log*"))
4169 (goto-char (point-max))
4170 ;(insert (concat (upcase (symbol-name label)) ": " message "\n"))
4172 ;; Mark multiline message with an extent, which `view-lossage'
4174 (when (string-match "\n" message)
4175 (setq extent (make-extent (point) (point)))
4176 (set-extent-properties extent '(end-open nil message-multiline t)))
4177 (insert message "\n")
4179 (set-extent-property extent 'end-open t)))
4180 (when (> (point-max) (max log-message-max-size (point-min)))
4181 ;; Trim log to ~90% of max size.
4182 (goto-char (max (- (point-max)
4183 (truncate (* 0.9 log-message-max-size)))
4186 (delete-region (point-min) (point))))))
4188 (defun message-displayed-p (&optional return-string frame)
4189 "Return a non-nil value if a message is presently displayed in the\n\
4190 minibuffer's echo area. If optional argument RETURN-STRING is non-nil,\n\
4191 return a string containing the message, otherwise just return t."
4192 ;; by definition, a message is displayed if the echo area buffer is
4193 ;; non-empty (see also echo_area_active()). It had better also
4194 ;; be the case that message-stack is nil exactly when the echo area
4196 (let ((buffer (get-buffer " *Echo Area*")))
4197 (and (< (point-min buffer) (point-max buffer))
4199 (buffer-substring nil nil buffer)
4202 ;;; Returns the string which remains in the echo area, or nil if none.
4203 ;;; If label is nil, the whole message stack is cleared.
4204 (defun clear-message (&optional label frame stdout-p no-restore)
4205 "Remove any message with the given LABEL from the message-stack,
4206 erasing it from the echo area if it's currently displayed there.
4207 If a message remains at the head of the message-stack and NO-RESTORE
4208 is nil, it will be displayed. The string which remains in the echo
4209 area will be returned, or nil if the message-stack is now empty.
4210 If LABEL is nil, the entire message-stack is cleared.
4212 Unless you need the return value or you need to specify a label,
4213 you should just use (message nil)."
4214 (or frame (setq frame (selected-frame)))
4215 (let ((clear-stream (and message-stack (eq 'stream (frame-type frame)))))
4216 (remove-message label frame)
4217 (let ((inhibit-read-only t)
4218 (zmacs-region-stays zmacs-region-stays)) ; preserve from change
4219 (erase-buffer " *Echo Area*"))
4221 (send-string-to-terminal ?\n stdout-p))
4223 nil ; just preparing to put another msg up
4225 (let ((oldmsg (cdr (car message-stack))))
4226 (raw-append-message oldmsg frame stdout-p)
4228 ;; #### Should we (redisplay-echo-area) here? Messes some
4232 (defun remove-message (&optional label frame)
4233 ;; If label is nil, we want to remove all matching messages.
4234 ;; Must reverse the stack first to log them in the right order.
4236 (while (and message-stack
4237 (or (null label) ; null label means clear whole stack
4238 (eq label (car (car message-stack)))))
4239 (push (car message-stack) log)
4240 (setq message-stack (cdr message-stack)))
4241 (let ((s message-stack))
4243 (let ((msg (car (cdr s))))
4244 (if (eq label (car msg))
4247 (setcdr s (cdr (cdr s))))
4248 (setq s (cdr s))))))
4249 ;; (possibly) log each removed message
4252 (run-hook-with-args 'remove-message-hook
4253 (car (car log)) (cdr (car log)))
4254 (error (setq remove-message-hook nil)
4255 (lwarn 'message-log 'warning
4256 "Error caught in `remove-message-hook': %s"
4257 (error-message-string e))
4258 (let ((inhibit-read-only t))
4259 (erase-buffer " *Echo Area*"))
4260 (signal (car e) (cdr e))))
4261 (setq log (cdr log)))))
4263 (defun append-message (label message &optional frame stdout-p)
4264 (or frame (setq frame (selected-frame)))
4265 ;; Add a new entry to the message-stack, or modify an existing one
4266 (let ((top (car message-stack)))
4267 (if (eq label (car top))
4268 (setcdr top (concat (cdr top) message))
4269 (push (cons label message) message-stack)))
4270 (raw-append-message message frame stdout-p))
4272 ;; Really append the message to the echo area. no fiddling with
4274 (defun raw-append-message (message &optional frame stdout-p)
4275 (unless (equal message "")
4276 (let ((inhibit-read-only t)
4277 (zmacs-region-stays zmacs-region-stays)) ; preserve from change
4278 (insert-string message " *Echo Area*")
4279 ;; Conditionalizing on the device type in this way is not that clean,
4280 ;; but neither is having a device method, as I originally implemented
4281 ;; it: all non-stream devices behave in the same way. Perhaps
4282 ;; the cleanest way is to make the concept of a "redisplayable"
4283 ;; device, which stream devices are not. Look into this more if
4284 ;; we ever create another non-redisplayable device type (e.g.
4285 ;; processes? printers?).
4287 ;; Don't redisplay the echo area if we are executing a macro.
4288 (if (not executing-kbd-macro)
4289 (if (eq 'stream (frame-type frame))
4290 (send-string-to-terminal message stdout-p (frame-device frame))
4291 (redisplay-echo-area))))))
4293 (defun display-message (label message &optional frame stdout-p)
4294 "Print a one-line message at the bottom of the frame. First argument
4295 LABEL is an identifier for this message. MESSAGE is the string to display.
4296 Use `clear-message' to remove a labelled message.
4298 Here are some standard labels (those marked with `*' are not logged
4299 by default--see the `log-message-ignore-labels' variable):
4300 message default label used by the `message' function
4301 error default label used for reporting errors
4302 * progress progress indicators like \"Converting... 45%\"
4303 * prompt prompt-like messages like \"I-search: foo\"
4304 * command helper command messages like \"Mark set\"
4305 * no-log messages that should never be logged"
4306 (clear-message label frame stdout-p t)
4307 (append-message label message frame stdout-p))
4309 (defun current-message (&optional frame)
4310 "Return the current message in the echo area, or nil.
4311 The FRAME argument is currently unused."
4312 (cdr (car message-stack)))
4314 ;;; may eventually be frame-dependent
4315 (defun current-message-label (&optional frame)
4316 (car (car message-stack)))
4318 (defun message (fmt &rest args)
4319 "Print a one-line message at the bottom of the frame.
4320 The arguments are the same as to `format'.
4322 If the only argument is nil, clear any existing message; let the
4323 minibuffer contents show."
4324 ;; questionable junk in the C code
4325 ;; (if (framep default-minibuffer-frame)
4326 ;; (make-frame-visible default-minibuffer-frame))
4327 (if (and (null fmt) (null args))
4329 (clear-message nil))
4330 (let ((str (apply 'format fmt args)))
4331 (display-message 'message str)
4334 (defun lmessage (label fmt &rest args)
4335 "Print a one-line message at the bottom of the frame.
4336 First argument LABEL is an identifier for this message. The rest of the
4337 arguments are the same as to `format'.
4339 See `display-message' for a list of standard labels."
4340 (if (and (null fmt) (null args))
4342 (clear-message label nil))
4343 (let ((str (apply 'format fmt args)))
4344 (display-message label str)
4348 ;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;
4350 ;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;
4352 (defcustom log-warning-minimum-level 'info
4353 "Minimum level of warnings that should be logged.
4354 The warnings in levels below this are completely ignored, as if they never
4357 The recognized warning levels, in decreasing order of priority, are
4358 'emergency, 'alert, 'critical, 'error, 'warning, 'notice, 'info, and
4361 See also `display-warning-minimum-level'.
4363 You can also control which warnings are displayed on a class-by-class
4364 basis. See `display-warning-suppressed-classes' and
4365 `log-warning-suppressed-classes'."
4366 :type '(choice (const emergency) (const alert) (const critical)
4367 (const error) (const warning) (const notice)
4368 (const info) (const debug))
4371 (defcustom display-warning-minimum-level 'info
4372 "Minimum level of warnings that should be displayed.
4373 The warnings in levels below this will be generated, but not
4376 The recognized warning levels, in decreasing order of priority, are
4377 'emergency, 'alert, 'critical, 'error, 'warning, 'notice, 'info, and
4380 See also `log-warning-minimum-level'.
4382 You can also control which warnings are displayed on a class-by-class
4383 basis. See `display-warning-suppressed-classes' and
4384 `log-warning-suppressed-classes'."
4385 :type '(choice (const emergency) (const alert) (const critical)
4386 (const error) (const warning) (const notice)
4387 (const info) (const debug))
4390 (defvar log-warning-suppressed-classes nil
4391 "List of classes of warnings that shouldn't be logged or displayed.
4392 If any of the CLASS symbols associated with a warning is the same as
4393 any of the symbols listed here, the warning will be completely ignored,
4394 as it they never happened.
4396 NOTE: In most circumstances, you should *not* set this variable.
4397 Set `display-warning-suppressed-classes' instead. That way the suppressed
4398 warnings are not displayed but are still unobtrusively logged.
4400 See also `log-warning-minimum-level' and `display-warning-minimum-level'.")
4402 (defcustom display-warning-suppressed-classes nil
4403 "List of classes of warnings that shouldn't be displayed.
4404 If any of the CLASS symbols associated with a warning is the same as
4405 any of the symbols listed here, the warning will not be displayed.
4406 The warning will still logged in the *Warnings* buffer (unless also
4407 contained in `log-warning-suppressed-classes'), but the buffer will
4408 not be automatically popped up.
4410 See also `log-warning-minimum-level' and `display-warning-minimum-level'."
4411 :type '(repeat symbol)
4414 (defvar warning-count 0
4415 "Count of the number of warning messages displayed so far.")
4417 (defconst warning-level-alist '((emergency . 8)
4426 (defun warning-level-p (level)
4427 "Non-nil if LEVEL specifies a warning level."
4428 (and (symbolp level) (assq level warning-level-alist)))
4430 ;; If you're interested in rewriting this function, be aware that it
4431 ;; could be called at arbitrary points in a Lisp program (when a
4432 ;; built-in function wants to issue a warning, it will call out to
4433 ;; this function the next time some Lisp code is evaluated). Therefore,
4434 ;; this function *must* not permanently modify any global variables
4435 ;; (e.g. the current buffer) except those that specifically apply
4436 ;; to the warning system.
4438 (defvar before-init-deferred-warnings nil)
4440 (defun after-init-display-warnings ()
4441 "Display warnings deferred till after the init file is run.
4442 Warnings that occur before then are deferred so that warning
4443 suppression in the .emacs file will be honored."
4444 (while before-init-deferred-warnings
4445 (apply 'display-warning (car before-init-deferred-warnings))
4446 (setq before-init-deferred-warnings
4447 (cdr before-init-deferred-warnings))))
4449 (add-hook 'after-init-hook 'after-init-display-warnings)
4451 (defun display-warning (class message &optional level)
4452 "Display a warning message.
4453 CLASS should be a symbol describing what sort of warning this is, such
4454 as `resource' or `key-mapping'. A list of such symbols is also
4455 accepted. (Individual classes can be suppressed; see
4456 `display-warning-suppressed-classes'.) Optional argument LEVEL can
4457 be used to specify a priority for the warning, other than default priority
4458 `warning'. (See `display-warning-minimum-level'). The message is
4459 inserted into the *Warnings* buffer, which is made visible at appropriate
4461 (or level (setq level 'warning))
4462 (or (listp class) (setq class (list class)))
4463 (check-argument-type 'warning-level-p level)
4464 (if (and (not (featurep 'infodock))
4465 (not init-file-loaded))
4466 (push (list class message level) before-init-deferred-warnings)
4469 (level-num (cdr (assq level warning-level-alist))))
4470 (if (< level-num (cdr (assq log-warning-minimum-level
4471 warning-level-alist)))
4472 (throw 'ignored nil))
4473 (if (intersection class log-warning-suppressed-classes)
4474 (throw 'ignored nil))
4476 (if (< level-num (cdr (assq display-warning-minimum-level
4477 warning-level-alist)))
4478 (setq display-p nil))
4480 (intersection class display-warning-suppressed-classes))
4481 (setq display-p nil))
4482 (let ((buffer (get-buffer-create "*Warnings*")))
4484 ;; The C code looks at display-warning-tick to determine
4485 ;; when it should call `display-warning-buffer'. Change it
4486 ;; to get the C code's attention.
4487 (incf display-warning-tick))
4488 (with-current-buffer buffer
4489 (goto-char (point-max))
4490 (incf warning-count)
4491 (princ (format "(%d) (%s/%s) "
4493 (mapconcat 'symbol-name class ",")
4496 (princ message buffer)
4498 (terpri buffer)))))))
4500 (defun warn (&rest args)
4501 "Display a warning message.
4502 The message is constructed by passing all args to `format'. The message
4503 is placed in the *Warnings* buffer, which will be popped up at the next
4504 redisplay. The class of the warning is `warning'. See also
4506 (display-warning 'warning (apply 'format args)))
4508 (defun lwarn (class level &rest args)
4509 "Display a labeled warning message.
4510 CLASS should be a symbol describing what sort of warning this is, such
4511 as `resource' or `key-mapping'. A list of such symbols is also
4512 accepted. (Individual classes can be suppressed; see
4513 `display-warning-suppressed-classes'.) If non-nil, LEVEL can be used
4514 to specify a priority for the warning, other than default priority
4515 `warning'. (See `display-warning-minimum-level'). The message is
4516 inserted into the *Warnings* buffer, which is made visible at appropriate
4519 The rest of the arguments are passed to `format'."
4520 (display-warning class (apply 'format args)
4521 (or level 'warning)))
4523 (defvar warning-marker nil)
4525 ;; When this function is called by the C code, all non-local exits are
4526 ;; trapped and C-g is inhibited; therefore, it would be a very, very
4527 ;; bad idea for this function to get into an infinite loop.
4529 (defun display-warning-buffer ()
4530 "Make the buffer that contains the warnings be visible.
4531 The C code calls this periodically, right before redisplay."
4532 (let ((buffer (get-buffer-create "*Warnings*")))
4533 (when (or (not warning-marker)
4534 (not (eq (marker-buffer warning-marker) buffer)))
4535 (setq warning-marker (make-marker))
4536 (set-marker warning-marker 1 buffer))
4537 (if temp-buffer-show-function
4539 (funcall temp-buffer-show-function buffer)
4540 (mapc #'(lambda (win) (set-window-start win warning-marker))
4541 (windows-of-buffer buffer nil t)))
4542 (set-window-start (display-buffer buffer) warning-marker))
4543 (set-marker warning-marker (point-max buffer) buffer)))
4546 ;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;
4548 ;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;
4550 (defun emacs-name ()
4551 "Return the printable name of this instance of Emacs."
4552 (cond ((featurep 'infodock) "InfoDock")
4553 ((featurep 'xemacs) "XEmacs")
4556 (defun debug-print (format &rest args)
4557 "Send a string to the debugging output.
4558 The string is formatted using (apply #'format FORMAT ARGS)."
4559 (princ (apply #'format format args) 'external-debugging-output))
4561 ;;; simple.el ends here