1 /* Header file for the buffer manipulation primitives.
2 Copyright (C) 1985, 1986, 1992, 1993, 1994, 1995
3 Free Software Foundation, Inc.
4 Copyright (C) 1995 Sun Microsystems, Inc.
6 This file is part of XEmacs.
8 XEmacs is free software; you can redistribute it and/or modify it
9 under the terms of the GNU General Public License as published by the
10 Free Software Foundation; either version 2, or (at your option) any
13 XEmacs is distributed in the hope that it will be useful, but WITHOUT
14 ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
15 FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License
18 You should have received a copy of the GNU General Public License
19 along with XEmacs; see the file COPYING. If not, write to
20 the Free Software Foundation, Inc., 59 Temple Place - Suite 330,
21 Boston, MA 02111-1307, USA. */
23 /* Synched up with: FSF 19.30. */
28 JWZ: separated out bufslots.h, early in Lemacs.
29 Ben Wing: almost completely rewritten for Mule, 19.12.
32 #ifndef _XEMACS_BUFFER_H_
33 #define _XEMACS_BUFFER_H_
36 #include "mule-charset.h"
39 /************************************************************************/
41 /* definition of Lisp buffer object */
43 /************************************************************************/
45 /* Note: we keep both Bytind and Bufpos versions of some of the
46 important buffer positions because they are accessed so much.
47 If we didn't do this, we would constantly be invalidating the
48 bufpos<->bytind cache under Mule.
50 Note that under non-Mule, both versions will always be the
51 same so we don't really need to keep track of them. But it
52 simplifies the logic to go ahead and do so all the time and
53 the memory loss is insignificant. */
55 /* Formerly, it didn't much matter what went inside the struct buffer_text
56 and what went outside it. Now it does, with the advent of "indirect
57 buffers" that share text with another buffer. An indirect buffer
58 shares the same *text* as another buffer, but has its own buffer-local
59 variables, its own accessible region, and its own markers and extents.
60 (Due to the nature of markers, it doesn't actually matter much whether
61 we stick them inside or out of the struct buffer_text -- the user won't
62 notice any difference -- but we go ahead and put them outside for
63 consistency and overall saneness of algorithm.)
65 FSFmacs gets away with not maintaining any "children" pointers from
66 a buffer to the indirect buffers that refer to it by putting the
67 markers inside of the struct buffer_text, using markers to keep track
68 of BEGV and ZV in indirect buffers, and relying on the fact that
69 all intervals (text properties and overlays) use markers for their
70 start and end points. We don't do this for extents (markers are
71 inefficient anyway and take up space), so we have to maintain
72 children pointers. This is not terribly hard, though, and the
73 code to maintain this is just like the code already present in
74 extent-parent and extent-children.
79 Bufbyte *beg; /* Actual address of buffer contents. */
80 Bytind gpt; /* Index of gap in buffer. */
81 Bytind z; /* Index of end of buffer. */
82 Bufpos bufz; /* Equivalent as a Bufpos. */
83 int gap_size; /* Size of buffer's gap */
84 int end_gap_size; /* Size of buffer's end gap */
85 long modiff; /* This counts buffer-modification events
86 for this buffer. It is incremented for
87 each such event, and never otherwise
89 long save_modiff; /* Previous value of modiff, as of last
90 time buffer visited or saved a file. */
93 /* We keep track of a "known" region for very fast access.
94 This information is text-only so it goes here. */
95 Bufpos mule_bufmin, mule_bufmax;
96 Bytind mule_bytmin, mule_bytmax;
100 int mule_shifter, mule_three_p;
103 /* And we also cache 16 positions for fairly fast access near those
105 Bufpos mule_bufpos_cache[16];
106 Bytind mule_bytind_cache[16];
109 /* Similar to the above, we keep track of positions for which line
110 number has last been calculated. See line-number.c. */
111 Lisp_Object line_number_cache;
113 /* Change data that goes with the text. */
114 struct buffer_text_change_data *changes;
120 struct lcrecord_header header;
122 /* This structure holds the coordinates of the buffer contents
123 in ordinary buffers. In indirect buffers, this is not used. */
124 struct buffer_text own_text;
126 /* This points to the `struct buffer_text' that is used for this buffer.
127 In an ordinary buffer, this is the own_text field above.
128 In an indirect buffer, this is the own_text field of another buffer. */
129 struct buffer_text *text;
131 Bytind pt; /* Position of point in buffer. */
132 Bufpos bufpt; /* Equivalent as a Bufpos. */
133 Bytind begv; /* Index of beginning of accessible range. */
134 Bufpos bufbegv; /* Equivalent as a Bufpos. */
135 Bytind zv; /* Index of end of accessible range. */
136 Bufpos bufzv; /* Equivalent as a Bufpos. */
138 int face_change; /* This is set when a change in how the text should
139 be displayed (e.g., font, color) is made. */
141 /* change data indicating what portion of the text has changed
142 since the last time this was reset. Used by redisplay.
143 Logically we should keep this with the text structure, but
144 redisplay resets it for each buffer individually and we don't
145 want interference between an indirect buffer and its base
147 struct each_buffer_change_data *changes;
149 #ifdef REGION_CACHE_NEEDS_WORK
150 /* If the long line scan cache is enabled (i.e. the buffer-local
151 variable cache-long-line-scans is non-nil), newline_cache
152 points to the newline cache, and width_run_cache points to the
155 The newline cache records which stretches of the buffer are
156 known *not* to contain newlines, so that they can be skipped
157 quickly when we search for newlines.
159 The width run cache records which stretches of the buffer are
160 known to contain characters whose widths are all the same. If
161 the width run cache maps a character to a value > 0, that value
162 is the character's width; if it maps a character to zero, we
163 don't know what its width is. This allows compute_motion to
164 process such regions very quickly, using algebra instead of
165 inspecting each character. See also width_table, below. */
166 struct region_cache *newline_cache;
167 struct region_cache *width_run_cache;
168 #endif /* REGION_CACHE_NEEDS_WORK */
170 /* The markers that refer to this buffer. This is actually a single
171 marker -- successive elements in its marker `chain' are the other
172 markers referring to this buffer */
173 struct Lisp_Marker *markers;
175 /* The buffer's extent info. This is its own type, an extent-info
176 object (done this way for ease in marking / finalizing). */
177 Lisp_Object extent_info;
179 /* ----------------------------------------------------------------- */
180 /* All the stuff above this line is the responsibility of insdel.c,
181 with some help from marker.c and extents.c.
182 All the stuff below this line is the responsibility of buffer.c. */
184 /* In an indirect buffer, this points to the base buffer.
185 In an ordinary buffer, it is 0.
186 We DO mark through this slot. */
187 struct buffer *base_buffer;
189 /* List of indirect buffers whose base is this buffer.
190 If we are an indirect buffer, this will be nil.
191 Do NOT mark through this. */
192 Lisp_Object indirect_children;
194 /* Flags saying which DEFVAR_PER_BUFFER variables
195 are local to this buffer. */
198 /* Set to the modtime of the visited file when read or written.
199 -1 means visited file was nonexistent.
200 0 means visited file modtime unknown; in no case complain
201 about any mismatch on next save attempt. */
204 /* the value of text->modiff at the last auto-save. */
205 int auto_save_modified;
207 /* The time at which we detected a failure to auto-save,
208 Or -1 if we didn't have a failure. */
209 int auto_save_failure_time;
211 /* Position in buffer at which display started
212 the last time this buffer was displayed. */
213 int last_window_start;
215 /* Everything from here down must be a Lisp_Object */
217 #define MARKED_SLOT(x) Lisp_Object x
218 #include "bufslots.h"
222 DECLARE_LRECORD (buffer, struct buffer);
223 #define XBUFFER(x) XRECORD (x, buffer, struct buffer)
224 #define XSETBUFFER(x, p) XSETRECORD (x, p, buffer)
225 #define BUFFERP(x) RECORDP (x, buffer)
226 #define GC_BUFFERP(x) GC_RECORDP (x, buffer)
227 #define CHECK_BUFFER(x) CHECK_RECORD (x, buffer)
228 #define CONCHECK_BUFFER(x) CONCHECK_RECORD (x, buffer)
230 #define BUFFER_LIVE_P(b) (!NILP ((b)->name))
232 #define CHECK_LIVE_BUFFER(x) do { \
234 if (!BUFFER_LIVE_P (XBUFFER (x))) \
235 dead_wrong_type_argument (Qbuffer_live_p, (x)); \
238 #define CONCHECK_LIVE_BUFFER(x) do { \
239 CONCHECK_BUFFER (x); \
240 if (!BUFFER_LIVE_P (XBUFFER (x))) \
241 x = wrong_type_argument (Qbuffer_live_p, (x)); \
245 #define BUFFER_BASE_BUFFER(b) ((b)->base_buffer ? (b)->base_buffer : (b))
247 /* Map over buffers sharing the same text as MPS_BUF. MPS_BUFVAR is a
248 variable that gets the buffer values (beginning with the base
249 buffer, then the children), and MPS_BUFCONS should be a temporary
250 Lisp_Object variable. */
251 #define MAP_INDIRECT_BUFFERS(mps_buf, mps_bufvar, mps_bufcons) \
252 for (mps_bufcons = Qunbound, \
253 mps_bufvar = BUFFER_BASE_BUFFER (mps_buf); \
254 UNBOUNDP (mps_bufcons) ? \
255 (mps_bufcons = mps_bufvar->indirect_children, \
257 : (!NILP (mps_bufcons) \
258 && (mps_bufvar = XBUFFER (XCAR (mps_bufcons)), 1) \
259 && (mps_bufcons = XCDR (mps_bufcons), 1)); \
264 /************************************************************************/
266 /* working with raw internal-format data */
268 /************************************************************************/
270 /* NOTE: In all the following macros, we follow these rules concerning
271 multiple evaluation of the arguments:
273 1) Anything that's an lvalue can be evaluated more than once.
274 2) Anything that's a Lisp Object can be evaluated more than once.
275 This should probably be changed, but this follows the way
276 that all the macros in lisp.h do things.
277 3) 'struct buffer *' arguments can be evaluated more than once.
278 4) Nothing else can be evaluated more than once. Use inline
279 functions, if necessary, to prevent multiple evaluation.
280 5) An exception to (4) is that there are some macros below that
281 may evaluate their arguments more than once. They are all
282 denoted with the word "unsafe" in their name and are generally
283 meant to be called only by other macros that have already
284 stored the calling values in temporary variables.
287 Use the following functions/macros on contiguous strings of data.
288 If the text you're operating on is known to come from a buffer, use
289 the buffer-level functions below -- they know about the gap and may
293 (A) For working with charptr's (pointers to internally-formatted text):
294 -----------------------------------------------------------------------
296 VALID_CHARPTR_P (ptr):
297 Given a charptr, does it point to the beginning of a character?
299 ASSERT_VALID_CHARPTR (ptr):
300 If error-checking is enabled, assert that the given charptr
301 points to the beginning of a character. Otherwise, do nothing.
304 Given a charptr (assumed to point at the beginning of a character),
305 modify that pointer so it points to the beginning of the next
309 Given a charptr (assumed to point at the beginning of a
310 character or at the very end of the text), modify that pointer
311 so it points to the beginning of the previous character.
313 VALIDATE_CHARPTR_BACKWARD (ptr):
314 Make sure that PTR is pointing to the beginning of a character.
315 If not, back up until this is the case. Note that there are not
316 too many places where it is legitimate to do this sort of thing.
317 It's an error if you're passed an "invalid" char * pointer.
318 NOTE: PTR *must* be pointing to a valid part of the string (i.e.
319 not the very end, unless the string is zero-terminated or
320 something) in order for this function to not cause crashes.
322 VALIDATE_CHARPTR_FORWARD (ptr):
323 Make sure that PTR is pointing to the beginning of a character.
324 If not, move forward until this is the case. Note that there
325 are not too many places where it is legitimate to do this sort
326 of thing. It's an error if you're passed an "invalid" char *
330 (B) For working with the length (in bytes and characters) of a
331 section of internally-formatted text:
332 --------------------------------------------------------------
334 bytecount_to_charcount (ptr, nbi):
335 Given a pointer to a text string and a length in bytes,
336 return the equivalent length in characters.
338 charcount_to_bytecount (ptr, nch):
339 Given a pointer to a text string and a length in characters,
340 return the equivalent length in bytes.
342 charptr_n_addr (ptr, n):
343 Return a pointer to the beginning of the character offset N
344 (in characters) from PTR.
347 (C) For retrieving or changing the character pointed to by a charptr:
348 ---------------------------------------------------------------------
350 charptr_emchar (ptr):
351 Retrieve the character pointed to by PTR as an Emchar.
353 charptr_emchar_n (ptr, n):
354 Retrieve the character at offset N (in characters) from PTR,
357 set_charptr_emchar (ptr, ch):
358 Store the character CH (an Emchar) as internally-formatted
359 text starting at PTR. Return the number of bytes stored.
361 charptr_copy_char (ptr, ptr2):
362 Retrieve the character pointed to by PTR and store it as
363 internally-formatted text in PTR2.
366 (D) For working with Emchars:
367 -----------------------------
369 [Note that there are other functions/macros for working with Emchars
370 in mule-charset.h, for retrieving the charset of an Emchar
371 and such. These are only valid when MULE is defined.]
374 Return whether the given Emchar is valid.
377 Return whether the given Lisp_Object is a character.
379 CHECK_CHAR_COERCE_INT (ch):
380 Signal an error if CH is not a valid character or integer Lisp_Object.
381 If CH is an integer Lisp_Object, convert it to a character Lisp_Object,
382 but merely by repackaging, without performing tests for char validity.
385 Maximum number of buffer bytes per Emacs character.
390 /* ---------------------------------------------------------------------- */
391 /* (A) For working with charptr's (pointers to internally-formatted text) */
392 /* ---------------------------------------------------------------------- */
395 # define VALID_CHARPTR_P(ptr) BUFBYTE_FIRST_BYTE_P (* (unsigned char *) ptr)
397 # define VALID_CHARPTR_P(ptr) 1
400 #ifdef ERROR_CHECK_BUFPOS
401 # define ASSERT_VALID_CHARPTR(ptr) assert (VALID_CHARPTR_P (ptr))
403 # define ASSERT_VALID_CHARPTR(ptr)
406 /* Note that INC_CHARPTR() and DEC_CHARPTR() have to be written in
407 completely separate ways. INC_CHARPTR() cannot use the DEC_CHARPTR()
408 trick of looking for a valid first byte because it might run off
409 the end of the string. DEC_CHARPTR() can't use the INC_CHARPTR()
410 method because it doesn't have easy access to the first byte of
411 the character it's moving over. */
413 #define REAL_INC_CHARPTR(ptr) \
414 ((void) ((ptr) += REP_BYTES_BY_FIRST_BYTE (* (unsigned char *) (ptr))))
416 #define REAL_DEC_CHARPTR(ptr) do { \
418 } while (!VALID_CHARPTR_P (ptr))
420 #ifdef ERROR_CHECK_BUFPOS
421 #define INC_CHARPTR(ptr) do { \
422 ASSERT_VALID_CHARPTR (ptr); \
423 REAL_INC_CHARPTR (ptr); \
426 #define DEC_CHARPTR(ptr) do { \
427 CONST Bufbyte *dc_ptr1 = (ptr); \
428 CONST Bufbyte *dc_ptr2 = dc_ptr1; \
429 REAL_DEC_CHARPTR (dc_ptr2); \
430 assert (dc_ptr1 - dc_ptr2 == \
431 REP_BYTES_BY_FIRST_BYTE (*dc_ptr2)); \
435 #else /* ! ERROR_CHECK_BUFPOS */
436 #define INC_CHARPTR(ptr) REAL_INC_CHARPTR (ptr)
437 #define DEC_CHARPTR(ptr) REAL_DEC_CHARPTR (ptr)
438 #endif /* ! ERROR_CHECK_BUFPOS */
442 #define VALIDATE_CHARPTR_BACKWARD(ptr) do { \
443 while (!VALID_CHARPTR_P (ptr)) ptr--; \
446 /* This needs to be trickier to avoid the possibility of running off
447 the end of the string. */
449 #define VALIDATE_CHARPTR_FORWARD(ptr) do { \
450 Bufbyte *vcf_ptr = (ptr); \
451 VALIDATE_CHARPTR_BACKWARD (vcf_ptr); \
452 if (vcf_ptr != (ptr)) \
460 #define VALIDATE_CHARPTR_BACKWARD(ptr)
461 #define VALIDATE_CHARPTR_FORWARD(ptr)
462 #endif /* not MULE */
464 /* -------------------------------------------------------------- */
465 /* (B) For working with the length (in bytes and characters) of a */
466 /* section of internally-formatted text */
467 /* -------------------------------------------------------------- */
469 INLINE CONST Bufbyte *charptr_n_addr (CONST Bufbyte *ptr, Charcount offset);
470 INLINE CONST Bufbyte *
471 charptr_n_addr (CONST Bufbyte *ptr, Charcount offset)
473 return ptr + charcount_to_bytecount (ptr, offset);
476 /* -------------------------------------------------------------------- */
477 /* (C) For retrieving or changing the character pointed to by a charptr */
478 /* -------------------------------------------------------------------- */
480 #define simple_charptr_emchar(ptr) ((Emchar) (ptr)[0])
481 #define simple_set_charptr_emchar(ptr, x) ((ptr)[0] = (Bufbyte) (x), 1)
482 #define simple_charptr_copy_char(ptr, ptr2) ((ptr2)[0] = *(ptr), 1)
486 Emchar non_ascii_charptr_emchar (CONST Bufbyte *ptr);
487 Bytecount non_ascii_set_charptr_emchar (Bufbyte *ptr, Emchar c);
488 Bytecount non_ascii_charptr_copy_char (CONST Bufbyte *ptr, Bufbyte *ptr2);
490 INLINE Emchar charptr_emchar (CONST Bufbyte *ptr);
492 charptr_emchar (CONST Bufbyte *ptr)
494 return BYTE_ASCII_P (*ptr) ?
495 simple_charptr_emchar (ptr) :
496 non_ascii_charptr_emchar (ptr);
499 INLINE Bytecount set_charptr_emchar (Bufbyte *ptr, Emchar x);
501 set_charptr_emchar (Bufbyte *ptr, Emchar x)
503 return !CHAR_MULTIBYTE_P (x) ?
504 simple_set_charptr_emchar (ptr, x) :
505 non_ascii_set_charptr_emchar (ptr, x);
508 INLINE Bytecount charptr_copy_char (CONST Bufbyte *ptr, Bufbyte *ptr2);
510 charptr_copy_char (CONST Bufbyte *ptr, Bufbyte *ptr2)
512 return BYTE_ASCII_P (*ptr) ?
513 simple_charptr_copy_char (ptr, ptr2) :
514 non_ascii_charptr_copy_char (ptr, ptr2);
519 # define charptr_emchar(ptr) simple_charptr_emchar (ptr)
520 # define set_charptr_emchar(ptr, x) simple_set_charptr_emchar (ptr, x)
521 # define charptr_copy_char(ptr, ptr2) simple_charptr_copy_char (ptr, ptr2)
523 #endif /* not MULE */
525 #define charptr_emchar_n(ptr, offset) \
526 charptr_emchar (charptr_n_addr (ptr, offset))
529 /* ---------------------------- */
530 /* (D) For working with Emchars */
531 /* ---------------------------- */
536 #define valid_char_p(ch) 1
538 int non_ascii_valid_char_p (Emchar ch);
540 INLINE int valid_char_p (Emchar ch);
542 valid_char_p (Emchar ch)
544 return ((unsigned int) (ch) <= 0xff) || non_ascii_valid_char_p (ch);
550 #define valid_char_p(ch) ((unsigned int) (ch) <= 0xff)
552 #endif /* not MULE */
554 #define CHAR_INTP(x) (INTP (x) && valid_char_p (XINT (x)))
556 #define CHAR_OR_CHAR_INTP(x) (CHARP (x) || CHAR_INTP (x))
558 #ifdef ERROR_CHECK_TYPECHECK
560 INLINE Emchar XCHAR_OR_CHAR_INT (Lisp_Object obj);
562 XCHAR_OR_CHAR_INT (Lisp_Object obj)
564 assert (CHAR_OR_CHAR_INTP (obj));
565 return CHARP (obj) ? XCHAR (obj) : XINT (obj);
570 #define XCHAR_OR_CHAR_INT(obj) (CHARP ((obj)) ? XCHAR ((obj)) : XINT ((obj)))
574 #define CHECK_CHAR_COERCE_INT(x) do { \
577 else if (CHAR_INTP (x)) \
578 x = make_char (XINT (x)); \
580 x = wrong_type_argument (Qcharacterp, x); \
584 # define MAX_EMCHAR_LEN 6
587 # define MAX_EMCHAR_LEN 4
589 # define MAX_EMCHAR_LEN 1
594 /*----------------------------------------------------------------------*/
595 /* Accessor macros for important positions in a buffer */
596 /*----------------------------------------------------------------------*/
598 /* We put them here because some stuff below wants them before the
599 place where we would normally put them. */
601 /* None of these are lvalues. Use the settor macros below to change
604 /* Beginning of buffer. */
605 #define BI_BUF_BEG(buf) ((Bytind) 1)
606 #define BUF_BEG(buf) ((Bufpos) 1)
608 /* Beginning of accessible range of buffer. */
609 #define BI_BUF_BEGV(buf) ((buf)->begv + 0)
610 #define BUF_BEGV(buf) ((buf)->bufbegv + 0)
612 /* End of accessible range of buffer. */
613 #define BI_BUF_ZV(buf) ((buf)->zv + 0)
614 #define BUF_ZV(buf) ((buf)->bufzv + 0)
617 #define BI_BUF_Z(buf) ((buf)->text->z + 0)
618 #define BUF_Z(buf) ((buf)->text->bufz + 0)
621 #define BI_BUF_PT(buf) ((buf)->pt + 0)
622 #define BUF_PT(buf) ((buf)->bufpt + 0)
624 /*----------------------------------------------------------------------*/
625 /* Converting between positions and addresses */
626 /*----------------------------------------------------------------------*/
628 /* Convert the address of a byte in the buffer into a position. */
629 INLINE Bytind BI_BUF_PTR_BYTE_POS (struct buffer *buf, Bufbyte *ptr);
631 BI_BUF_PTR_BYTE_POS (struct buffer *buf, Bufbyte *ptr)
633 return ((ptr) - (buf)->text->beg + 1
634 - ((ptr - (buf)->text->beg + 1) > (buf)->text->gpt
635 ? (buf)->text->gap_size : 0));
638 #define BUF_PTR_BYTE_POS(buf, ptr) \
639 bytind_to_bufpos (buf, BI_BUF_PTR_BYTE_POS (buf, ptr))
641 /* Address of byte at position POS in buffer. */
642 INLINE Bufbyte * BI_BUF_BYTE_ADDRESS (struct buffer *buf, Bytind pos);
644 BI_BUF_BYTE_ADDRESS (struct buffer *buf, Bytind pos)
646 return ((buf)->text->beg +
647 ((pos >= (buf)->text->gpt ? (pos + (buf)->text->gap_size) : pos)
651 #define BUF_BYTE_ADDRESS(buf, pos) \
652 BI_BUF_BYTE_ADDRESS (buf, bufpos_to_bytind (buf, pos))
654 /* Address of byte before position POS in buffer. */
655 INLINE Bufbyte * BI_BUF_BYTE_ADDRESS_BEFORE (struct buffer *buf, Bytind pos);
657 BI_BUF_BYTE_ADDRESS_BEFORE (struct buffer *buf, Bytind pos)
659 return ((buf)->text->beg +
660 ((pos > (buf)->text->gpt ? (pos + (buf)->text->gap_size) : pos)
664 #define BUF_BYTE_ADDRESS_BEFORE(buf, pos) \
665 BI_BUF_BYTE_ADDRESS_BEFORE (buf, bufpos_to_bytind (buf, pos))
667 /*----------------------------------------------------------------------*/
668 /* Converting between byte indices and memory indices */
669 /*----------------------------------------------------------------------*/
671 INLINE int valid_memind_p (struct buffer *buf, Memind x);
673 valid_memind_p (struct buffer *buf, Memind x)
675 return ((x >= 1 && x <= (Memind) (buf)->text->gpt) ||
676 (x > (Memind) ((buf)->text->gpt + (buf)->text->gap_size) &&
677 x <= (Memind) ((buf)->text->z + (buf)->text->gap_size)));
680 INLINE Memind bytind_to_memind (struct buffer *buf, Bytind x);
682 bytind_to_memind (struct buffer *buf, Bytind x)
684 return (Memind) ((x > (buf)->text->gpt) ? (x + (buf)->text->gap_size) : x);
688 INLINE Bytind memind_to_bytind (struct buffer *buf, Memind x);
690 memind_to_bytind (struct buffer *buf, Memind x)
692 #ifdef ERROR_CHECK_BUFPOS
693 assert (valid_memind_p (buf, x));
695 return (Bytind) ((x > (Memind) (buf)->text->gpt) ?
696 x - (buf)->text->gap_size :
700 #define memind_to_bufpos(buf, x) \
701 bytind_to_bufpos (buf, memind_to_bytind (buf, x))
702 #define bufpos_to_memind(buf, x) \
703 bytind_to_memind (buf, bufpos_to_bytind (buf, x))
705 /* These macros generalize many standard buffer-position functions to
706 either a buffer or a string. */
708 /* Converting between Meminds and Bytinds, for a buffer-or-string.
709 For strings, this is a no-op. For buffers, this resolves
710 to the standard memind<->bytind converters. */
712 #define buffer_or_string_bytind_to_memind(obj, ind) \
713 (BUFFERP (obj) ? bytind_to_memind (XBUFFER (obj), ind) : (Memind) ind)
715 #define buffer_or_string_memind_to_bytind(obj, ind) \
716 (BUFFERP (obj) ? memind_to_bytind (XBUFFER (obj), ind) : (Bytind) ind)
718 /* Converting between Bufpos's and Bytinds, for a buffer-or-string.
719 For strings, this maps to the bytecount<->charcount converters. */
721 #define buffer_or_string_bufpos_to_bytind(obj, pos) \
722 (BUFFERP (obj) ? bufpos_to_bytind (XBUFFER (obj), pos) : \
723 (Bytind) charcount_to_bytecount (XSTRING_DATA (obj), pos))
725 #define buffer_or_string_bytind_to_bufpos(obj, ind) \
726 (BUFFERP (obj) ? bytind_to_bufpos (XBUFFER (obj), ind) : \
727 (Bufpos) bytecount_to_charcount (XSTRING_DATA (obj), ind))
729 /* Similar for Bufpos's and Meminds. */
731 #define buffer_or_string_bufpos_to_memind(obj, pos) \
732 (BUFFERP (obj) ? bufpos_to_memind (XBUFFER (obj), pos) : \
733 (Memind) charcount_to_bytecount (XSTRING_DATA (obj), pos))
735 #define buffer_or_string_memind_to_bufpos(obj, ind) \
736 (BUFFERP (obj) ? memind_to_bufpos (XBUFFER (obj), ind) : \
737 (Bufpos) bytecount_to_charcount (XSTRING_DATA (obj), ind))
739 /************************************************************************/
741 /* working with buffer-level data */
743 /************************************************************************/
747 (A) Working with byte indices:
748 ------------------------------
750 VALID_BYTIND_P(buf, bi):
751 Given a byte index, does it point to the beginning of a character?
753 ASSERT_VALID_BYTIND_UNSAFE(buf, bi):
754 If error-checking is enabled, assert that the given byte index
755 is within range and points to the beginning of a character
756 or to the end of the buffer. Otherwise, do nothing.
758 ASSERT_VALID_BYTIND_BACKWARD_UNSAFE(buf, bi):
759 If error-checking is enabled, assert that the given byte index
760 is within range and satisfies ASSERT_VALID_BYTIND() and also
761 does not refer to the beginning of the buffer. (i.e. movement
762 backwards is OK.) Otherwise, do nothing.
764 ASSERT_VALID_BYTIND_FORWARD_UNSAFE(buf, bi):
765 If error-checking is enabled, assert that the given byte index
766 is within range and satisfies ASSERT_VALID_BYTIND() and also
767 does not refer to the end of the buffer. (i.e. movement
768 forwards is OK.) Otherwise, do nothing.
770 VALIDATE_BYTIND_BACKWARD(buf, bi):
771 Make sure that the given byte index is pointing to the beginning
772 of a character. If not, back up until this is the case. Note
773 that there are not too many places where it is legitimate to do
774 this sort of thing. It's an error if you're passed an "invalid"
777 VALIDATE_BYTIND_FORWARD(buf, bi):
778 Make sure that the given byte index is pointing to the beginning
779 of a character. If not, move forward until this is the case.
780 Note that there are not too many places where it is legitimate
781 to do this sort of thing. It's an error if you're passed an
782 "invalid" byte index.
785 Given a byte index (assumed to point at the beginning of a
786 character), modify that value so it points to the beginning
787 of the next character.
790 Given a byte index (assumed to point at the beginning of a
791 character), modify that value so it points to the beginning
792 of the previous character. Unlike for DEC_CHARPTR(), we can
793 do all the assert()s because there are sentinels at the
794 beginning of the gap and the end of the buffer.
797 A constant representing an invalid Bytind. Valid Bytinds
798 can never have this value.
801 (B) Converting between Bufpos's and Bytinds:
802 --------------------------------------------
804 bufpos_to_bytind(buf, bu):
805 Given a Bufpos, return the equivalent Bytind.
807 bytind_to_bufpos(buf, bi):
808 Given a Bytind, return the equivalent Bufpos.
810 make_bufpos(buf, bi):
811 Given a Bytind, return the equivalent Bufpos as a Lisp Object.
815 /*----------------------------------------------------------------------*/
816 /* working with byte indices */
817 /*----------------------------------------------------------------------*/
820 # define VALID_BYTIND_P(buf, x) \
821 BUFBYTE_FIRST_BYTE_P (*BI_BUF_BYTE_ADDRESS (buf, x))
823 # define VALID_BYTIND_P(buf, x) 1
826 #ifdef ERROR_CHECK_BUFPOS
828 # define ASSERT_VALID_BYTIND_UNSAFE(buf, x) do { \
829 assert (BUFFER_LIVE_P (buf)); \
830 assert ((x) >= BI_BUF_BEG (buf) && x <= BI_BUF_Z (buf)); \
831 assert (VALID_BYTIND_P (buf, x)); \
833 # define ASSERT_VALID_BYTIND_BACKWARD_UNSAFE(buf, x) do { \
834 assert (BUFFER_LIVE_P (buf)); \
835 assert ((x) > BI_BUF_BEG (buf) && x <= BI_BUF_Z (buf)); \
836 assert (VALID_BYTIND_P (buf, x)); \
838 # define ASSERT_VALID_BYTIND_FORWARD_UNSAFE(buf, x) do { \
839 assert (BUFFER_LIVE_P (buf)); \
840 assert ((x) >= BI_BUF_BEG (buf) && x < BI_BUF_Z (buf)); \
841 assert (VALID_BYTIND_P (buf, x)); \
844 #else /* not ERROR_CHECK_BUFPOS */
845 # define ASSERT_VALID_BYTIND_UNSAFE(buf, x)
846 # define ASSERT_VALID_BYTIND_BACKWARD_UNSAFE(buf, x)
847 # define ASSERT_VALID_BYTIND_FORWARD_UNSAFE(buf, x)
849 #endif /* not ERROR_CHECK_BUFPOS */
851 /* Note that, although the Mule version will work fine for non-Mule
852 as well (it should reduce down to nothing), we provide a separate
853 version to avoid compilation warnings and possible non-optimal
854 results with stupid compilers. */
857 # define VALIDATE_BYTIND_BACKWARD(buf, x) do { \
858 Bufbyte *VBB_ptr = BI_BUF_BYTE_ADDRESS (buf, x); \
859 while (!BUFBYTE_FIRST_BYTE_P (*VBB_ptr)) \
863 # define VALIDATE_BYTIND_BACKWARD(buf, x)
866 /* Note that, although the Mule version will work fine for non-Mule
867 as well (it should reduce down to nothing), we provide a separate
868 version to avoid compilation warnings and possible non-optimal
869 results with stupid compilers. */
872 # define VALIDATE_BYTIND_FORWARD(buf, x) do { \
873 Bufbyte *VBF_ptr = BI_BUF_BYTE_ADDRESS (buf, x); \
874 while (!BUFBYTE_FIRST_BYTE_P (*VBF_ptr)) \
878 # define VALIDATE_BYTIND_FORWARD(buf, x)
881 /* Note that in the simplest case (no MULE, no ERROR_CHECK_BUFPOS),
882 this crap reduces down to simply (x)++. */
884 #define INC_BYTIND(buf, x) do \
886 ASSERT_VALID_BYTIND_FORWARD_UNSAFE (buf, x); \
887 /* Note that we do the increment first to \
888 make sure that the pointer in \
889 VALIDATE_BYTIND_FORWARD() ends up on \
890 the correct side of the gap */ \
892 VALIDATE_BYTIND_FORWARD (buf, x); \
895 /* Note that in the simplest case (no MULE, no ERROR_CHECK_BUFPOS),
896 this crap reduces down to simply (x)--. */
898 #define DEC_BYTIND(buf, x) do \
900 ASSERT_VALID_BYTIND_BACKWARD_UNSAFE (buf, x); \
901 /* Note that we do the decrement first to \
902 make sure that the pointer in \
903 VALIDATE_BYTIND_BACKWARD() ends up on \
904 the correct side of the gap */ \
906 VALIDATE_BYTIND_BACKWARD (buf, x); \
909 INLINE Bytind prev_bytind (struct buffer *buf, Bytind x);
911 prev_bytind (struct buffer *buf, Bytind x)
917 INLINE Bytind next_bytind (struct buffer *buf, Bytind x);
919 next_bytind (struct buffer *buf, Bytind x)
925 #define BYTIND_INVALID ((Bytind) -1)
927 /*----------------------------------------------------------------------*/
928 /* Converting between buffer positions and byte indices */
929 /*----------------------------------------------------------------------*/
933 Bytind bufpos_to_bytind_func (struct buffer *buf, Bufpos x);
934 Bufpos bytind_to_bufpos_func (struct buffer *buf, Bytind x);
936 /* The basic algorithm we use is to keep track of a known region of
937 characters in each buffer, all of which are of the same width. We
938 keep track of the boundaries of the region in both Bufpos and
939 Bytind coordinates and also keep track of the char width, which
940 is 1 - 4 bytes. If the position we're translating is not in
941 the known region, then we invoke a function to update the known
942 region to surround the position in question. This assumes
943 locality of reference, which is usually the case.
945 Note that the function to update the known region can be simple
946 or complicated depending on how much information we cache.
947 For the moment, we don't cache any information, and just move
948 linearly forward or back from the known region, with a few
949 shortcuts to catch all-ASCII buffers. (Note that this will
950 thrash with bad locality of reference.) A smarter method would
951 be to keep some sort of pseudo-extent layer over the buffer;
952 maybe keep track of the bufpos/bytind correspondence at the
953 beginning of each line, which would allow us to do a binary
954 search over the pseudo-extents to narrow things down to the
955 correct line, at which point you could use a linear movement
956 method. This would also mesh well with efficiently
957 implementing a line-numbering scheme.
959 Note also that we have to multiply or divide by the char width
960 in order to convert the positions. We do some tricks to avoid
961 ever actually having to do a multiply or divide, because that
962 is typically an expensive operation (esp. divide). Multiplying
963 or dividing by 1, 2, or 4 can be implemented simply as a
964 shift left or shift right, and we keep track of a shifter value
965 (0, 1, or 2) indicating how much to shift. Multiplying by 3
966 can be implemented by doubling and then adding the original
967 value. Dividing by 3, alas, cannot be implemented in any
968 simple shift/subtract method, as far as I know; so we just
969 do a table lookup. For simplicity, we use a table of size
970 128K, which indexes the "divide-by-3" values for the first
971 64K non-negative numbers. (Note that we can increase the
972 size up to 384K, i.e. indexing the first 192K non-negative
973 numbers, while still using shorts in the array.) This also
974 means that the size of the known region can be at most
975 64K for width-three characters.
979 extern short three_to_one_table[];
982 INLINE int real_bufpos_to_bytind (struct buffer *buf, Bufpos x);
984 real_bufpos_to_bytind (struct buffer *buf, Bufpos x)
986 if (x >= buf->text->mule_bufmin && x <= buf->text->mule_bufmax)
987 return (buf->text->mule_bytmin +
989 (x - buf->text->mule_bufmin) * buf->text->mule_size
991 ((x - buf->text->mule_bufmin) << buf->text->mule_shifter) +
992 (buf->text->mule_three_p ? (x - buf->text->mule_bufmin) : 0)
996 return bufpos_to_bytind_func (buf, x);
999 INLINE int real_bytind_to_bufpos (struct buffer *buf, Bytind x);
1001 real_bytind_to_bufpos (struct buffer *buf, Bytind x)
1003 if (x >= buf->text->mule_bytmin && x <= buf->text->mule_bytmax)
1004 return (buf->text->mule_bufmin +
1006 (buf->text->mule_size == 0 ? 0 :
1007 (x - buf->text->mule_bytmin) / buf->text->mule_size)
1009 ((buf->text->mule_three_p
1010 ? three_to_one_table[x - buf->text->mule_bytmin]
1011 : (x - buf->text->mule_bytmin) >> buf->text->mule_shifter))
1015 return bytind_to_bufpos_func (buf, x);
1018 #else /* not MULE */
1020 # define real_bufpos_to_bytind(buf, x) ((Bytind) x)
1021 # define real_bytind_to_bufpos(buf, x) ((Bufpos) x)
1023 #endif /* not MULE */
1025 #ifdef ERROR_CHECK_BUFPOS
1027 Bytind bufpos_to_bytind (struct buffer *buf, Bufpos x);
1028 Bufpos bytind_to_bufpos (struct buffer *buf, Bytind x);
1030 #else /* not ERROR_CHECK_BUFPOS */
1032 #define bufpos_to_bytind real_bufpos_to_bytind
1033 #define bytind_to_bufpos real_bytind_to_bufpos
1035 #endif /* not ERROR_CHECK_BUFPOS */
1037 #define make_bufpos(buf, ind) make_int (bytind_to_bufpos (buf, ind))
1039 /*----------------------------------------------------------------------*/
1040 /* Converting between buffer bytes and Emacs characters */
1041 /*----------------------------------------------------------------------*/
1043 /* The character at position POS in buffer. */
1044 #define BI_BUF_FETCH_CHAR(buf, pos) \
1045 charptr_emchar (BI_BUF_BYTE_ADDRESS (buf, pos))
1046 #define BUF_FETCH_CHAR(buf, pos) \
1047 BI_BUF_FETCH_CHAR (buf, bufpos_to_bytind (buf, pos))
1049 /* The character at position POS in buffer, as a string. This is
1050 equivalent to set_charptr_emchar (str, BUF_FETCH_CHAR (buf, pos))
1051 but is faster for Mule. */
1053 # define BI_BUF_CHARPTR_COPY_CHAR(buf, pos, str) \
1054 charptr_copy_char (BI_BUF_BYTE_ADDRESS (buf, pos), str)
1055 #define BUF_CHARPTR_COPY_CHAR(buf, pos, str) \
1056 BI_BUF_CHARPTR_COPY_CHAR (buf, bufpos_to_bytind (buf, pos), str)
1061 /************************************************************************/
1063 /* working with externally-formatted data */
1065 /************************************************************************/
1067 /* Sometimes strings need to be converted into one or another
1068 external format, for passing to a library function. (Note
1069 that we encapsulate and automatically convert the arguments
1070 of some functions, but not others.) At times this conversion
1071 also has to go the other way -- i.e. when we get external-
1072 format strings back from a library function.
1077 /* WARNING: These use a static buffer. This can lead to disaster if
1078 these functions are not used *very* carefully. Under normal
1079 circumstances, do not call these functions; call the front ends
1082 Extbyte *convert_to_external_format (CONST Bufbyte *ptr,
1085 enum external_data_format fmt);
1086 Bufbyte *convert_from_external_format (CONST Extbyte *ptr,
1089 enum external_data_format fmt);
1093 #define convert_to_external_format(ptr, len, len_out, fmt) \
1094 (*(len_out) = (int) (len), (Extbyte *) (ptr))
1095 #define convert_from_external_format(ptr, len, len_out, fmt) \
1096 (*(len_out) = (Bytecount) (len), (Bufbyte *) (ptr))
1100 /* In all of the following macros we use the following general principles:
1102 -- Functions that work with charptr's accept two sorts of charptr's:
1104 a) Pointers to memory with a length specified. The pointer will be
1105 fundamentally of type `unsigned char *' (although labelled
1106 as `Bufbyte *' for internal-format data and `Extbyte *' for
1107 external-format data) and the length will be fundamentally of
1108 type `int' (although labelled as `Bytecount' for internal-format
1109 data and `Extcount' for external-format data). The length is
1110 always a count in bytes.
1111 b) Zero-terminated pointers; no length specified. The pointer
1112 is of type `char *', whether the data pointed to is internal-format
1113 or external-format. These sorts of pointers are available for
1114 convenience in working with C library functions and literal
1115 strings. In general you should use these sorts of pointers only
1116 to interface to library routines and not for general manipulation,
1117 as you are liable to lose embedded nulls and such. This could
1118 be a big problem for routines that want Unicode-formatted data,
1119 which is likely to have lots of embedded nulls in it.
1120 (In the real world, though, external Unicode data will be UTF-8,
1121 which will not have embedded nulls and is ASCII-compatible - martin)
1123 -- Functions that work with Lisp strings accept strings as Lisp Objects
1124 (as opposed to the `struct Lisp_String *' for some of the other
1125 string accessors). This is for convenience in working with the
1126 functions, as otherwise you will almost always have to call
1127 XSTRING() on the object.
1129 -- Functions that work with charptr's are not guaranteed to copy
1130 their data into alloca()ed space. Functions that work with
1131 Lisp strings are, however. The reason is that Lisp strings can
1132 be relocated any time a GC happens, and it could happen at some
1133 rather unexpected times. The internal-external conversion is
1134 rarely done in time-critical functions, and so the slight
1135 extra time required for alloca() and copy is well-worth the
1136 safety of knowing your string data won't be relocated out from
1141 /* Maybe convert charptr's data into ext-format and store the result in
1144 You may wonder why this is written in this fashion and not as a
1145 function call. With a little trickery it could certainly be
1146 written this way, but it won't work because of those DAMN GCC WANKERS
1147 who couldn't be bothered to handle alloca() properly on the x86
1148 architecture. (If you put a call to alloca() in the argument to
1149 a function call, the stack space gets allocated right in the
1150 middle of the arguments to the function call and you are unbelievably
1155 #define GET_CHARPTR_EXT_DATA_ALLOCA(ptr, len, fmt, ptr_out, len_out) do \
1157 Bytecount gceda_len_in = (Bytecount) (len); \
1158 Extcount gceda_len_out; \
1159 CONST Bufbyte *gceda_ptr_in = (ptr); \
1160 Extbyte *gceda_ptr_out = \
1161 convert_to_external_format (gceda_ptr_in, gceda_len_in, \
1162 &gceda_len_out, fmt); \
1163 /* If the new string is identical to the old (will be the case most \
1164 of the time), just return the same string back. This saves \
1165 on alloca()ing, which can be useful on C alloca() machines and \
1166 on stack-space-challenged environments. */ \
1168 if (gceda_len_in == gceda_len_out && \
1169 !memcmp (gceda_ptr_in, gceda_ptr_out, gceda_len_out)) \
1171 (ptr_out) = (Extbyte *) gceda_ptr_in; \
1175 (ptr_out) = (Extbyte *) alloca (1 + gceda_len_out); \
1176 memcpy ((void *) ptr_out, gceda_ptr_out, 1 + gceda_len_out); \
1178 (len_out) = gceda_len_out; \
1183 #define GET_CHARPTR_EXT_DATA_ALLOCA(ptr, len, fmt, ptr_out, len_out) do \
1185 (ptr_out) = (Extbyte *) (ptr); \
1186 (len_out) = (Extcount) (len); \
1191 #define GET_C_CHARPTR_EXT_DATA_ALLOCA(ptr, fmt, ptr_out) do \
1193 Extcount gcceda_ignored_len; \
1194 CONST Bufbyte *gcceda_ptr_in = (CONST Bufbyte *) (ptr); \
1195 Extbyte *gcceda_ptr_out; \
1197 GET_CHARPTR_EXT_DATA_ALLOCA (gcceda_ptr_in, \
1198 strlen ((char *) gcceda_ptr_in), \
1201 gcceda_ignored_len); \
1202 (ptr_out) = (char *) gcceda_ptr_out; \
1205 #define GET_C_CHARPTR_EXT_BINARY_DATA_ALLOCA(ptr, ptr_out) \
1206 GET_C_CHARPTR_EXT_DATA_ALLOCA (ptr, FORMAT_BINARY, ptr_out)
1207 #define GET_CHARPTR_EXT_BINARY_DATA_ALLOCA(ptr, len, ptr_out, len_out) \
1208 GET_CHARPTR_EXT_DATA_ALLOCA (ptr, len, FORMAT_BINARY, ptr_out, len_out)
1210 #define GET_C_CHARPTR_EXT_FILENAME_DATA_ALLOCA(ptr, ptr_out) \
1211 GET_C_CHARPTR_EXT_DATA_ALLOCA (ptr, FORMAT_FILENAME, ptr_out)
1212 #define GET_CHARPTR_EXT_FILENAME_DATA_ALLOCA(ptr, len, ptr_out, len_out) \
1213 GET_CHARPTR_EXT_DATA_ALLOCA (ptr, len, FORMAT_FILENAME, ptr_out, len_out)
1215 #define GET_C_CHARPTR_EXT_CTEXT_DATA_ALLOCA(ptr, ptr_out) \
1216 GET_C_CHARPTR_EXT_DATA_ALLOCA (ptr, FORMAT_CTEXT, ptr_out)
1217 #define GET_CHARPTR_EXT_CTEXT_DATA_ALLOCA(ptr, len, ptr_out, len_out) \
1218 GET_CHARPTR_EXT_DATA_ALLOCA (ptr, len, FORMAT_CTEXT, ptr_out, len_out)
1220 /* Maybe convert external charptr's data into internal format and store
1221 the result in alloca()'ed space.
1223 You may wonder why this is written in this fashion and not as a
1224 function call. With a little trickery it could certainly be
1225 written this way, but it won't work because of those DAMN GCC WANKERS
1226 who couldn't be bothered to handle alloca() properly on the x86
1227 architecture. (If you put a call to alloca() in the argument to
1228 a function call, the stack space gets allocated right in the
1229 middle of the arguments to the function call and you are unbelievably
1234 #define GET_CHARPTR_INT_DATA_ALLOCA(ptr, len, fmt, ptr_out, len_out) do \
1236 Extcount gcida_len_in = (Extcount) (len); \
1237 Bytecount gcida_len_out; \
1238 CONST Extbyte *gcida_ptr_in = (ptr); \
1239 Bufbyte *gcida_ptr_out = \
1240 convert_from_external_format (gcida_ptr_in, gcida_len_in, \
1241 &gcida_len_out, fmt); \
1242 /* If the new string is identical to the old (will be the case most \
1243 of the time), just return the same string back. This saves \
1244 on alloca()ing, which can be useful on C alloca() machines and \
1245 on stack-space-challenged environments. */ \
1247 if (gcida_len_in == gcida_len_out && \
1248 !memcmp (gcida_ptr_in, gcida_ptr_out, gcida_len_out)) \
1250 (ptr_out) = (Bufbyte *) gcida_ptr_in; \
1254 (ptr_out) = (Extbyte *) alloca (1 + gcida_len_out); \
1255 memcpy ((void *) ptr_out, gcida_ptr_out, 1 + gcida_len_out); \
1257 (len_out) = gcida_len_out; \
1262 #define GET_CHARPTR_INT_DATA_ALLOCA(ptr, len, fmt, ptr_out, len_out) do \
1264 (ptr_out) = (Bufbyte *) (ptr); \
1265 (len_out) = (Bytecount) (len); \
1270 #define GET_C_CHARPTR_INT_DATA_ALLOCA(ptr, fmt, ptr_out) do \
1272 Bytecount gccida_ignored_len; \
1273 CONST Extbyte *gccida_ptr_in = (CONST Extbyte *) (ptr); \
1274 Bufbyte *gccida_ptr_out; \
1276 GET_CHARPTR_INT_DATA_ALLOCA (gccida_ptr_in, \
1277 strlen ((char *) gccida_ptr_in), \
1280 gccida_ignored_len); \
1281 (ptr_out) = gccida_ptr_out; \
1284 #define GET_C_CHARPTR_INT_BINARY_DATA_ALLOCA(ptr, ptr_out) \
1285 GET_C_CHARPTR_INT_DATA_ALLOCA (ptr, FORMAT_BINARY, ptr_out)
1286 #define GET_CHARPTR_INT_BINARY_DATA_ALLOCA(ptr, len, ptr_out, len_out) \
1287 GET_CHARPTR_INT_DATA_ALLOCA (ptr, len, FORMAT_BINARY, ptr_out, len_out)
1289 #define GET_C_CHARPTR_INT_FILENAME_DATA_ALLOCA(ptr, ptr_out) \
1290 GET_C_CHARPTR_INT_DATA_ALLOCA (ptr, FORMAT_FILENAME, ptr_out)
1291 #define GET_CHARPTR_INT_FILENAME_DATA_ALLOCA(ptr, len, ptr_out, len_out) \
1292 GET_CHARPTR_INT_DATA_ALLOCA (ptr, len, FORMAT_FILENAME, ptr_out, len_out)
1294 #define GET_C_CHARPTR_INT_CTEXT_DATA_ALLOCA(ptr, ptr_out) \
1295 GET_C_CHARPTR_INT_DATA_ALLOCA (ptr, FORMAT_CTEXT, ptr_out)
1296 #define GET_CHARPTR_INT_CTEXT_DATA_ALLOCA(ptr, len, ptr_out, len_out) \
1297 GET_CHARPTR_INT_DATA_ALLOCA (ptr, len, FORMAT_CTEXT, ptr_out, len_out)
1300 /* Maybe convert Lisp string's data into ext-format and store the result in
1303 You may wonder why this is written in this fashion and not as a
1304 function call. With a little trickery it could certainly be
1305 written this way, but it won't work because of those DAMN GCC WANKERS
1306 who couldn't be bothered to handle alloca() properly on the x86
1307 architecture. (If you put a call to alloca() in the argument to
1308 a function call, the stack space gets allocated right in the
1309 middle of the arguments to the function call and you are unbelievably
1312 #define GET_STRING_EXT_DATA_ALLOCA(s, fmt, ptr_out, len_out) do \
1314 Extcount gseda_len_out; \
1315 struct Lisp_String *gseda_s = XSTRING (s); \
1316 Extbyte * gseda_ptr_out = \
1317 convert_to_external_format (string_data (gseda_s), \
1318 string_length (gseda_s), \
1319 &gseda_len_out, fmt); \
1320 (ptr_out) = (Extbyte *) alloca (1 + gseda_len_out); \
1321 memcpy ((void *) ptr_out, gseda_ptr_out, 1 + gseda_len_out); \
1322 (len_out) = gseda_len_out; \
1326 #define GET_C_STRING_EXT_DATA_ALLOCA(s, fmt, ptr_out) do \
1328 Extcount gcseda_ignored_len; \
1329 Extbyte *gcseda_ptr_out; \
1331 GET_STRING_EXT_DATA_ALLOCA (s, fmt, gcseda_ptr_out, \
1332 gcseda_ignored_len); \
1333 (ptr_out) = (char *) gcseda_ptr_out; \
1336 #define GET_STRING_BINARY_DATA_ALLOCA(s, ptr_out, len_out) \
1337 GET_STRING_EXT_DATA_ALLOCA (s, FORMAT_BINARY, ptr_out, len_out)
1338 #define GET_C_STRING_BINARY_DATA_ALLOCA(s, ptr_out) \
1339 GET_C_STRING_EXT_DATA_ALLOCA (s, FORMAT_BINARY, ptr_out)
1341 #define GET_STRING_FILENAME_DATA_ALLOCA(s, ptr_out, len_out) \
1342 GET_STRING_EXT_DATA_ALLOCA (s, FORMAT_FILENAME, ptr_out, len_out)
1343 #define GET_C_STRING_FILENAME_DATA_ALLOCA(s, ptr_out) \
1344 GET_C_STRING_EXT_DATA_ALLOCA (s, FORMAT_FILENAME, ptr_out)
1346 #define GET_STRING_OS_DATA_ALLOCA(s, ptr_out, len_out) \
1347 GET_STRING_EXT_DATA_ALLOCA (s, FORMAT_OS, ptr_out, len_out)
1348 #define GET_C_STRING_OS_DATA_ALLOCA(s, ptr_out) \
1349 GET_C_STRING_EXT_DATA_ALLOCA (s, FORMAT_OS, ptr_out)
1351 #define GET_STRING_CTEXT_DATA_ALLOCA(s, ptr_out, len_out) \
1352 GET_STRING_EXT_DATA_ALLOCA (s, FORMAT_CTEXT, ptr_out, len_out)
1353 #define GET_C_STRING_CTEXT_DATA_ALLOCA(s, ptr_out) \
1354 GET_C_STRING_EXT_DATA_ALLOCA (s, FORMAT_CTEXT, ptr_out)
1358 /************************************************************************/
1360 /* fake charset functions */
1362 /************************************************************************/
1364 /* used when MULE is not defined, so that Charset-type stuff can still
1369 #define Vcharset_ascii Qnil
1371 #define CHAR_CHARSET(ch) Vcharset_ascii
1372 #define CHAR_LEADING_BYTE(ch) LEADING_BYTE_ASCII
1373 #define LEADING_BYTE_ASCII 0x80
1374 #define NUM_LEADING_BYTES 1
1375 #define MIN_LEADING_BYTE 0x80
1376 #define CHARSETP(cs) 1
1377 #define CHARSET_BY_LEADING_BYTE(lb) Vcharset_ascii
1378 #define XCHARSET_LEADING_BYTE(cs) LEADING_BYTE_ASCII
1379 #define XCHARSET_GRAPHIC(cs) -1
1380 #define XCHARSET_COLUMNS(cs) 1
1381 #define XCHARSET_DIMENSION(cs) 1
1382 #define REP_BYTES_BY_FIRST_BYTE(fb) 1
1383 #define BREAKUP_CHAR(ch, charset, byte1, byte2) do { \
1384 (charset) = Vcharset_ascii; \
1388 #define BYTE_ASCII_P(byte) 1
1392 /************************************************************************/
1394 /* higher-level buffer-position functions */
1396 /************************************************************************/
1398 /*----------------------------------------------------------------------*/
1399 /* Settor macros for important positions in a buffer */
1400 /*----------------------------------------------------------------------*/
1402 /* Set beginning of accessible range of buffer. */
1403 #define SET_BOTH_BUF_BEGV(buf, val, bival) \
1406 (buf)->begv = (bival); \
1407 (buf)->bufbegv = (val); \
1410 /* Set end of accessible range of buffer. */
1411 #define SET_BOTH_BUF_ZV(buf, val, bival) \
1414 (buf)->zv = (bival); \
1415 (buf)->bufzv = (val); \
1419 /* Since BEGV and ZV are almost never set, it's reasonable to enforce
1420 the restriction that the Bufpos and Bytind values must both be
1421 specified. However, point is set in lots and lots of places. So
1422 we provide the ability to specify both (for efficiency) or just
1424 #define BOTH_BUF_SET_PT(buf, val, bival) set_buffer_point (buf, val, bival)
1425 #define BI_BUF_SET_PT(buf, bival) \
1426 BOTH_BUF_SET_PT (buf, bytind_to_bufpos (buf, bival), bival)
1427 #define BUF_SET_PT(buf, value) \
1428 BOTH_BUF_SET_PT (buf, value, bufpos_to_bytind (buf, value))
1432 /* These macros exist in FSFmacs because SET_PT() in FSFmacs incorrectly
1433 does too much stuff, such as moving out of invisible extents. */
1434 #define TEMP_SET_PT(position) (temp_set_point ((position), current_buffer))
1435 #define SET_BUF_PT(buf, value) ((buf)->pt = (value))
1436 #endif /* FSFmacs */
1438 /*----------------------------------------------------------------------*/
1439 /* Miscellaneous buffer values */
1440 /*----------------------------------------------------------------------*/
1442 /* Number of characters in buffer */
1443 #define BUF_SIZE(buf) (BUF_Z (buf) - BUF_BEG (buf))
1445 /* Is this buffer narrowed? */
1446 #define BUF_NARROWED(buf) \
1447 ((BI_BUF_BEGV (buf) != BI_BUF_BEG (buf)) || \
1448 (BI_BUF_ZV (buf) != BI_BUF_Z (buf)))
1450 /* Modification count. */
1451 #define BUF_MODIFF(buf) ((buf)->text->modiff)
1453 /* Saved modification count. */
1454 #define BUF_SAVE_MODIFF(buf) ((buf)->text->save_modiff)
1457 #define BUF_FACECHANGE(buf) ((buf)->face_change)
1459 #define POINT_MARKER_P(marker) \
1460 (XMARKER (marker)->buffer != 0 && \
1461 EQ ((marker), XMARKER (marker)->buffer->point_marker))
1463 #define BUF_MARKERS(buf) ((buf)->markers)
1467 The new definitions of CEILING_OF() and FLOOR_OF() differ semantically
1468 from the old ones (in FSF Emacs and XEmacs 19.11 and before).
1469 Conversion is as follows:
1471 OLD_BI_CEILING_OF(n) = NEW_BI_CEILING_OF(n) - 1
1472 OLD_BI_FLOOR_OF(n) = NEW_BI_FLOOR_OF(n + 1)
1474 The definitions were changed because the new definitions are more
1475 consistent with the way everything else works in Emacs.
1478 /* Properties of CEILING_OF and FLOOR_OF (also apply to BI_ variants):
1480 1) FLOOR_OF (CEILING_OF (n)) = n
1481 CEILING_OF (FLOOR_OF (n)) = n
1483 2) CEILING_OF (n) = n if and only if n = ZV
1484 FLOOR_OF (n) = n if and only if n = BEGV
1486 3) CEILING_OF (CEILING_OF (n)) = ZV
1487 FLOOR_OF (FLOOR_OF (n)) = BEGV
1489 4) The bytes in the regions
1491 [BYTE_ADDRESS (n), BYTE_ADDRESS_BEFORE (CEILING_OF (n))]
1495 [BYTE_ADDRESS (FLOOR_OF (n)), BYTE_ADDRESS_BEFORE (n)]
1501 /* Return the maximum index in the buffer it is safe to scan forwards
1502 past N to. This is used to prevent buffer scans from running into
1503 the gap (e.g. search.c). All characters between N and CEILING_OF(N)
1504 are located contiguous in memory. Note that the character *at*
1505 CEILING_OF(N) is not contiguous in memory. */
1506 #define BI_BUF_CEILING_OF(b, n) \
1507 ((n) < (b)->text->gpt && (b)->text->gpt < BI_BUF_ZV (b) ? \
1508 (b)->text->gpt : BI_BUF_ZV (b))
1509 #define BUF_CEILING_OF(b, n) \
1510 bytind_to_bufpos (b, BI_BUF_CEILING_OF (b, bufpos_to_bytind (b, n)))
1512 /* Return the minimum index in the buffer it is safe to scan backwards
1513 past N to. All characters between FLOOR_OF(N) and N are located
1514 contiguous in memory. Note that the character *at* N may not be
1515 contiguous in memory. */
1516 #define BI_BUF_FLOOR_OF(b, n) \
1517 (BI_BUF_BEGV (b) < (b)->text->gpt && (b)->text->gpt < (n) ? \
1518 (b)->text->gpt : BI_BUF_BEGV (b))
1519 #define BUF_FLOOR_OF(b, n) \
1520 bytind_to_bufpos (b, BI_BUF_FLOOR_OF (b, bufpos_to_bytind (b, n)))
1522 #define BI_BUF_CEILING_OF_IGNORE_ACCESSIBLE(b, n) \
1523 ((n) < (b)->text->gpt && (b)->text->gpt < BI_BUF_Z (b) ? \
1524 (b)->text->gpt : BI_BUF_Z (b))
1525 #define BUF_CEILING_OF_IGNORE_ACCESSIBLE(b, n) \
1527 (b, BI_BUF_CEILING_OF_IGNORE_ACCESSIBLE (b, bufpos_to_bytind (b, n)))
1529 #define BI_BUF_FLOOR_OF_IGNORE_ACCESSIBLE(b, n) \
1530 (BI_BUF_BEG (b) < (b)->text->gpt && (b)->text->gpt < (n) ? \
1531 (b)->text->gpt : BI_BUF_BEG (b))
1532 #define BUF_FLOOR_OF_IGNORE_ACCESSIBLE(b, n) \
1534 (b, BI_BUF_FLOOR_OF_IGNORE_ACCESSIBLE (b, bufpos_to_bytind (b, n)))
1537 extern struct buffer *current_buffer;
1539 /* This is the initial (startup) directory, as used for the *scratch* buffer.
1540 We're making this a global to make others aware of the startup directory.
1541 `initial_directory' is stored in external format.
1543 extern char initial_directory[];
1544 extern void init_initial_directory (void); /* initialize initial_directory */
1546 EXFUN (Fbuffer_disable_undo, 1);
1547 EXFUN (Fbuffer_modified_p, 1);
1548 EXFUN (Fbuffer_name, 1);
1549 EXFUN (Fcurrent_buffer, 0);
1550 EXFUN (Ferase_buffer, 1);
1551 EXFUN (Fget_buffer, 1);
1552 EXFUN (Fget_buffer_create, 1);
1553 EXFUN (Fget_file_buffer, 1);
1554 EXFUN (Fkill_buffer, 1);
1555 EXFUN (Fother_buffer, 3);
1556 EXFUN (Frecord_buffer, 1);
1557 EXFUN (Fset_buffer, 1);
1558 EXFUN (Fset_buffer_modified_p, 2);
1560 extern Lisp_Object QSscratch, Qafter_change_function, Qafter_change_functions;
1561 extern Lisp_Object Qbefore_change_function, Qbefore_change_functions;
1562 extern Lisp_Object Qbuffer_or_string_p, Qdefault_directory, Qfirst_change_hook;
1563 extern Lisp_Object Qpermanent_local, Vafter_change_function;
1564 extern Lisp_Object Vafter_change_functions, Vbefore_change_function;
1565 extern Lisp_Object Vbefore_change_functions, Vbuffer_alist, Vbuffer_defaults;
1566 extern Lisp_Object Vinhibit_read_only, Vtransient_mark_mode;
1568 /* This structure marks which slots in a buffer have corresponding
1569 default values in Vbuffer_defaults.
1570 Each such slot has a nonzero value in this structure.
1571 The value has only one nonzero bit.
1573 When a buffer has its own local value for a slot,
1574 the bit for that slot (found in the same slot in this structure)
1575 is turned on in the buffer's local_var_flags slot.
1577 If a slot in this structure is zero, then even though there may
1578 be a DEFVAR_BUFFER_LOCAL for the slot, there is no default value for it;
1579 and the corresponding slot in Vbuffer_defaults is not used. */
1581 extern struct buffer buffer_local_flags;
1584 /* Allocation of buffer data. */
1588 char *r_alloc (unsigned char **, unsigned long);
1589 char *r_re_alloc (unsigned char **, unsigned long);
1590 void r_alloc_free (unsigned char **);
1592 #define BUFFER_ALLOC(data, size) \
1593 ((Bufbyte *) r_alloc ((unsigned char **) &data, (size) * sizeof(Bufbyte)))
1594 #define BUFFER_REALLOC(data, size) \
1595 ((Bufbyte *) r_re_alloc ((unsigned char **) &data, (size) * sizeof(Bufbyte)))
1596 #define BUFFER_FREE(data) r_alloc_free ((unsigned char **) &(data))
1597 #define R_ALLOC_DECLARE(var,data) r_alloc_declare (&(var), data)
1599 #else /* !REL_ALLOC */
1601 #define BUFFER_ALLOC(data,size)\
1602 (data = xnew_array (Bufbyte, size))
1603 #define BUFFER_REALLOC(data,size)\
1604 ((Bufbyte *) xrealloc (data, (size) * sizeof(Bufbyte)))
1605 /* Avoid excess parentheses, or syntax errors may rear their heads. */
1606 #define BUFFER_FREE(data) xfree (data)
1607 #define R_ALLOC_DECLARE(var,data)
1609 #endif /* !REL_ALLOC */
1611 extern Lisp_Object Vbuffer_alist;
1612 void set_buffer_internal (struct buffer *b);
1613 struct buffer *decode_buffer (Lisp_Object buffer, int allow_string);
1615 /* from editfns.c */
1616 void widen_buffer (struct buffer *b, int no_clip);
1617 int beginning_of_line_p (struct buffer *b, Bufpos pt);
1620 void set_buffer_point (struct buffer *buf, Bufpos pos, Bytind bipos);
1621 void find_charsets_in_bufbyte_string (unsigned char *charsets,
1624 void find_charsets_in_emchar_string (unsigned char *charsets,
1627 int bufbyte_string_displayed_columns (CONST Bufbyte *str, Bytecount len);
1628 int emchar_string_displayed_columns (CONST Emchar *str, Charcount len);
1629 void convert_bufbyte_string_into_emchar_dynarr (CONST Bufbyte *str,
1631 Emchar_dynarr *dyn);
1632 Charcount convert_bufbyte_string_into_emchar_string (CONST Bufbyte *str,
1635 void convert_emchar_string_into_bufbyte_dynarr (Emchar *arr, int nels,
1636 Bufbyte_dynarr *dyn);
1637 Bufbyte *convert_emchar_string_into_malloced_string (Emchar *arr, int nels,
1638 Bytecount *len_out);
1640 void init_buffer_markers (struct buffer *b);
1641 void uninit_buffer_markers (struct buffer *b);
1643 /* flags for get_buffer_pos_char(), get_buffer_range_char(), etc. */
1644 /* At most one of GB_COERCE_RANGE and GB_NO_ERROR_IF_BAD should be
1645 specified. At most one of GB_NEGATIVE_FROM_END and GB_NO_ERROR_IF_BAD
1646 should be specified. */
1648 #define GB_ALLOW_PAST_ACCESSIBLE (1 << 0)
1649 #define GB_ALLOW_NIL (1 << 1)
1650 #define GB_CHECK_ORDER (1 << 2)
1651 #define GB_COERCE_RANGE (1 << 3)
1652 #define GB_NO_ERROR_IF_BAD (1 << 4)
1653 #define GB_NEGATIVE_FROM_END (1 << 5)
1654 #define GB_HISTORICAL_STRING_BEHAVIOR (GB_NEGATIVE_FROM_END | GB_ALLOW_NIL)
1656 Bufpos get_buffer_pos_char (struct buffer *b, Lisp_Object pos,
1657 unsigned int flags);
1658 Bytind get_buffer_pos_byte (struct buffer *b, Lisp_Object pos,
1659 unsigned int flags);
1660 void get_buffer_range_char (struct buffer *b, Lisp_Object from, Lisp_Object to,
1661 Bufpos *from_out, Bufpos *to_out,
1662 unsigned int flags);
1663 void get_buffer_range_byte (struct buffer *b, Lisp_Object from, Lisp_Object to,
1664 Bytind *from_out, Bytind *to_out,
1665 unsigned int flags);
1666 Charcount get_string_pos_char (Lisp_Object string, Lisp_Object pos,
1667 unsigned int flags);
1668 Bytecount get_string_pos_byte (Lisp_Object string, Lisp_Object pos,
1669 unsigned int flags);
1670 void get_string_range_char (Lisp_Object string, Lisp_Object from,
1671 Lisp_Object to, Charcount *from_out,
1672 Charcount *to_out, unsigned int flags);
1673 void get_string_range_byte (Lisp_Object string, Lisp_Object from,
1674 Lisp_Object to, Bytecount *from_out,
1675 Bytecount *to_out, unsigned int flags);
1676 Bufpos get_buffer_or_string_pos_char (Lisp_Object object, Lisp_Object pos,
1677 unsigned int flags);
1678 Bytind get_buffer_or_string_pos_byte (Lisp_Object object, Lisp_Object pos,
1679 unsigned int flags);
1680 void get_buffer_or_string_range_char (Lisp_Object object, Lisp_Object from,
1681 Lisp_Object to, Bufpos *from_out,
1682 Bufpos *to_out, unsigned int flags);
1683 void get_buffer_or_string_range_byte (Lisp_Object object, Lisp_Object from,
1684 Lisp_Object to, Bytind *from_out,
1685 Bytind *to_out, unsigned int flags);
1686 Bufpos buffer_or_string_accessible_begin_char (Lisp_Object object);
1687 Bufpos buffer_or_string_accessible_end_char (Lisp_Object object);
1688 Bytind buffer_or_string_accessible_begin_byte (Lisp_Object object);
1689 Bytind buffer_or_string_accessible_end_byte (Lisp_Object object);
1690 Bufpos buffer_or_string_absolute_begin_char (Lisp_Object object);
1691 Bufpos buffer_or_string_absolute_end_char (Lisp_Object object);
1692 Bytind buffer_or_string_absolute_begin_byte (Lisp_Object object);
1693 Bytind buffer_or_string_absolute_end_byte (Lisp_Object object);
1694 void record_buffer (Lisp_Object buf);
1695 Lisp_Object get_buffer (Lisp_Object name,
1696 int error_if_deleted_or_does_not_exist);
1697 int map_over_sharing_buffers (struct buffer *buf,
1698 int (*mapfun) (struct buffer *buf,
1703 /************************************************************************/
1704 /* Case conversion */
1705 /************************************************************************/
1707 /* A "trt" table is a mapping from characters to other characters,
1708 typically used to convert between uppercase and lowercase. For
1709 compatibility reasons, trt tables are currently in the form of
1710 a Lisp string of 256 characters, specifying the conversion for each
1711 of the first 256 Emacs characters (i.e. the 256 Latin-1 characters).
1712 This should be generalized at some point to support conversions for
1713 all of the allowable Mule characters.
1716 /* The _1 macros are named as such because they assume that you have
1717 already guaranteed that the character values are all in the range
1718 0 - 255. Bad lossage will happen otherwise. */
1720 # define MAKE_TRT_TABLE() Fmake_string (make_int (256), make_char (0))
1721 # define TRT_TABLE_AS_STRING(table) XSTRING_DATA (table)
1722 # define TRT_TABLE_CHAR_1(table, ch) \
1723 string_char (XSTRING (table), (Charcount) ch)
1724 # define SET_TRT_TABLE_CHAR_1(table, ch1, ch2) \
1725 set_string_char (XSTRING (table), (Charcount) ch1, ch2)
1728 # define MAKE_MIRROR_TRT_TABLE() make_opaque (256, 0)
1729 # define MIRROR_TRT_TABLE_AS_STRING(table) ((Bufbyte *) XOPAQUE_DATA (table))
1730 # define MIRROR_TRT_TABLE_CHAR_1(table, ch) \
1731 ((Emchar) (MIRROR_TRT_TABLE_AS_STRING (table)[ch]))
1732 # define SET_MIRROR_TRT_TABLE_CHAR_1(table, ch1, ch2) \
1733 (MIRROR_TRT_TABLE_AS_STRING (table)[ch1] = (Bufbyte) (ch2))
1736 # define IN_TRT_TABLE_DOMAIN(c) (((EMACS_UINT) (c)) <= 255)
1739 #define MIRROR_DOWNCASE_TABLE_AS_STRING(buf) \
1740 MIRROR_TRT_TABLE_AS_STRING (buf->mirror_downcase_table)
1741 #define MIRROR_UPCASE_TABLE_AS_STRING(buf) \
1742 MIRROR_TRT_TABLE_AS_STRING (buf->mirror_upcase_table)
1743 #define MIRROR_CANON_TABLE_AS_STRING(buf) \
1744 MIRROR_TRT_TABLE_AS_STRING (buf->mirror_case_canon_table)
1745 #define MIRROR_EQV_TABLE_AS_STRING(buf) \
1746 MIRROR_TRT_TABLE_AS_STRING (buf->mirror_case_eqv_table)
1748 #define MIRROR_DOWNCASE_TABLE_AS_STRING(buf) \
1749 TRT_TABLE_AS_STRING (buf->downcase_table)
1750 #define MIRROR_UPCASE_TABLE_AS_STRING(buf) \
1751 TRT_TABLE_AS_STRING (buf->upcase_table)
1752 #define MIRROR_CANON_TABLE_AS_STRING(buf) \
1753 TRT_TABLE_AS_STRING (buf->case_canon_table)
1754 #define MIRROR_EQV_TABLE_AS_STRING(buf) \
1755 TRT_TABLE_AS_STRING (buf->case_eqv_table)
1758 INLINE Emchar TRT_TABLE_OF (Lisp_Object trt, Emchar c);
1760 TRT_TABLE_OF (Lisp_Object trt, Emchar c)
1762 return IN_TRT_TABLE_DOMAIN (c) ? TRT_TABLE_CHAR_1 (trt, c) : c;
1765 /* Macros used below. */
1766 #define DOWNCASE_TABLE_OF(buf, c) TRT_TABLE_OF (buf->downcase_table, c)
1767 #define UPCASE_TABLE_OF(buf, c) TRT_TABLE_OF (buf->upcase_table, c)
1769 /* 1 if CH is upper case. */
1771 INLINE int UPPERCASEP (struct buffer *buf, Emchar ch);
1773 UPPERCASEP (struct buffer *buf, Emchar ch)
1775 return DOWNCASE_TABLE_OF (buf, ch) != ch;
1778 /* 1 if CH is lower case. */
1780 INLINE int LOWERCASEP (struct buffer *buf, Emchar ch);
1782 LOWERCASEP (struct buffer *buf, Emchar ch)
1784 return (UPCASE_TABLE_OF (buf, ch) != ch &&
1785 DOWNCASE_TABLE_OF (buf, ch) == ch);
1788 /* 1 if CH is neither upper nor lower case. */
1790 INLINE int NOCASEP (struct buffer *buf, Emchar ch);
1792 NOCASEP (struct buffer *buf, Emchar ch)
1794 return UPCASE_TABLE_OF (buf, ch) == ch;
1797 /* Upcase a character, or make no change if that cannot be done. */
1799 INLINE Emchar UPCASE (struct buffer *buf, Emchar ch);
1801 UPCASE (struct buffer *buf, Emchar ch)
1803 return (DOWNCASE_TABLE_OF (buf, ch) == ch) ? UPCASE_TABLE_OF (buf, ch) : ch;
1806 /* Upcase a character known to be not upper case. Unused. */
1808 #define UPCASE1(buf, ch) UPCASE_TABLE_OF (buf, ch)
1810 /* Downcase a character, or make no change if that cannot be done. */
1812 #define DOWNCASE(buf, ch) DOWNCASE_TABLE_OF (buf, ch)
1814 #endif /* _XEMACS_BUFFER_H_ */