-int main() {
-main()
-; return 0; }
-EOF
-if { (eval echo configure:5115: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
- rm -rf conftest*
- eval "ac_cv_lib_$ac_lib_var=yes"
-else
- echo "configure: failed program was:" >&5
- cat conftest.$ac_ext >&5
- rm -rf conftest*
- eval "ac_cv_lib_$ac_lib_var=no"
-fi
-rm -f conftest*
-xe_check_libs=""
-
-if eval "test \"`echo '$ac_cv_lib_'$ac_lib_var`\" = yes" ; then
- echo "$ac_t""yes" 1>&6
- libs_gtk="-lgdk_imlib $libs_gtk" && if test "$extra_verbose" = "yes"; then echo " Prepending \"-lgdk_imlib\" to \$libs_gtk"; fi
-else
- echo "$ac_t""no" 1>&6
-fi
-
-
-
-echo $ac_n "checking for Imlib_init in -lImlib""... $ac_c" 1>&6
-echo "configure:5137: checking for Imlib_init in -lImlib" >&5
-ac_lib_var=`echo Imlib'_'Imlib_init | sed 'y%./+-%__p_%'`
-
-xe_check_libs=" -lImlib "
-cat > conftest.$ac_ext <<EOF
-#line 5142 "configure"
-#include "confdefs.h"
-/* Override any gcc2 internal prototype to avoid an error. */
-/* We use char because int might match the return type of a gcc2
- builtin and then its argument prototype would still apply. */
-char Imlib_init();
-
-int main() {
-Imlib_init()
-; return 0; }
-EOF
-if { (eval echo configure:5153: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
- rm -rf conftest*
- eval "ac_cv_lib_$ac_lib_var=yes"
-else
- echo "configure: failed program was:" >&5
- cat conftest.$ac_ext >&5
- rm -rf conftest*
- eval "ac_cv_lib_$ac_lib_var=no"
-fi
-rm -f conftest*
-xe_check_libs=""
-
-if eval "test \"`echo '$ac_cv_lib_'$ac_lib_var`\" = yes" ; then
- echo "$ac_t""yes" 1>&6
- libs_gtk="$libs_gtk -lImlib" && if test "$extra_verbose" = "yes"; then echo " Appending \"-lImlib\" to \$libs_gtk"; fi
-else
- echo "$ac_t""no" 1>&6
-fi
-
-
- for ac_func in gdk_imlib_init
-do
-echo $ac_n "checking for $ac_func""... $ac_c" 1>&6
-echo "configure:5176: checking for $ac_func" >&5
-
-cat > conftest.$ac_ext <<EOF
-#line 5179 "configure"
-#include "confdefs.h"
-/* System header to define __stub macros and hopefully few prototypes,
- which can conflict with char $ac_func(); below. */
-#include <assert.h>
-/* Override any gcc2 internal prototype to avoid an error. */
-/* We use char because int might match the return type of a gcc2
- builtin and then its argument prototype would still apply. */
-char $ac_func();
-
-int main() {
-
-/* The GNU C library defines this for functions which it implements
- to always fail with ENOSYS. Some functions are actually named
- something starting with __ and the normal name is an alias. */
-#if defined (__stub_$ac_func) || defined (__stub___$ac_func)
-choke me
-#else
-$ac_func();
-#endif
-
-; return 0; }
-EOF
-if { (eval echo configure:5202: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
- rm -rf conftest*
- eval "ac_cv_func_$ac_func=yes"
-else
- echo "configure: failed program was:" >&5
- cat conftest.$ac_ext >&5
- rm -rf conftest*
- eval "ac_cv_func_$ac_func=no"
-fi
-rm -f conftest*
-
-if eval "test \"`echo '$ac_cv_func_'$ac_func`\" = yes"; then
- echo "$ac_t""yes" 1>&6
- ac_tr_func=HAVE_`echo $ac_func | tr 'abcdefghijklmnopqrstuvwxyz' 'ABCDEFGHIJKLMNOPQRSTUVWXYZ'`
- { test "$extra_verbose" = "yes" && cat << EOF
- Defining $ac_tr_func
-EOF
-cat >> confdefs.h <<EOF
-#define $ac_tr_func 1
-EOF
-}
-
-else
- echo "$ac_t""no" 1>&6
-fi
-done
-
-
- { test "$extra_verbose" = "yes" && cat << \EOF
- Defining HAVE_XPM
-EOF
-cat >> confdefs.h <<\EOF
-#define HAVE_XPM 1
-EOF
-}
-
- { test "$extra_verbose" = "yes" && cat << \EOF
- Defining HAVE_GTK
-EOF
-cat >> confdefs.h <<\EOF
-#define HAVE_GTK 1
-EOF
-}
-
-
-
- window_system=gtk
- with_gtk=yes
- with_x11=no
-
- test "${with_scrollbars}" != "no" && with_scrollbars=gtk
- test "${with_toolbars}" != no && with_toolbars=gtk
- test "${with_menubars}" != "no" && with_menubars=gtk
- test "${with_dialogs}" != "no" && with_dialogs=gtk
- test "${with_widgets}" != "no" && with_widgets=gtk
-
- extra_objs="$extra_objs console-gtk.o device-gtk.o event-gtk.o frame-gtk.o" && if test "$extra_verbose" = "yes"; then
- echo " xemacs will be linked with \"console-gtk.o device-gtk.o event-gtk.o frame-gtk.o\""
- fi
- extra_objs="$extra_objs objects-gtk.o redisplay-gtk.o glyphs-gtk.o" && if test "$extra_verbose" = "yes"; then
- echo " xemacs will be linked with \"objects-gtk.o redisplay-gtk.o glyphs-gtk.o\""
- fi
- extra_objs="$extra_objs select-gtk.o gccache-gtk.o" && if test "$extra_verbose" = "yes"; then
- echo " xemacs will be linked with \"select-gtk.o gccache-gtk.o\""
- fi
- extra_objs="$extra_objs gtk-xemacs.o ui-gtk.o" && if test "$extra_verbose" = "yes"; then
- echo " xemacs will be linked with \"gtk-xemacs.o ui-gtk.o\""
- fi
-
- OLD_CFLAGS="${CFLAGS}"
- OLD_CPPFLAGS="${CPPFLAGS}"
- OLD_LDFLAGS="${LDFLAGS}"
- CFLAGS="${GTK_CFLAGS} ${CFLAGS}"
- CPPFLAGS="${GTK_CFLAGS} ${CFLAGS}"
- LDFLAGS="${LDFLAGS} ${GTK_LIBS}"
- for ac_hdr in glade/glade.h glade.h
-do
-ac_safe=`echo "$ac_hdr" | sed 'y%./+-%__p_%'`
-echo $ac_n "checking for $ac_hdr""... $ac_c" 1>&6
-echo "configure:5281: checking for $ac_hdr" >&5
-
-cat > conftest.$ac_ext <<EOF
-#line 5284 "configure"
-#include "confdefs.h"
-#include <$ac_hdr>
-EOF
-ac_try="$ac_cpp conftest.$ac_ext >/dev/null 2>conftest.out"
-{ (eval echo configure:5289: \"$ac_try\") 1>&5; (eval $ac_try) 2>&5; }
-ac_err=`grep -v '^ *+' conftest.out | grep -v "^conftest.${ac_ext}\$"`
-if test -z "$ac_err"; then
- rm -rf conftest*
- eval "ac_cv_header_$ac_safe=yes"
-else
- echo "$ac_err" >&5
- echo "configure: failed program was:" >&5
- cat conftest.$ac_ext >&5
- rm -rf conftest*
- eval "ac_cv_header_$ac_safe=no"
-fi
-rm -f conftest*
-if eval "test \"`echo '$ac_cv_header_'$ac_safe`\" = yes"; then
- echo "$ac_t""yes" 1>&6
- ac_tr_hdr=HAVE_`echo $ac_hdr | sed 'y%abcdefghijklmnopqrstuvwxyz./-%ABCDEFGHIJKLMNOPQRSTUVWXYZ___%'`
- { test "$extra_verbose" = "yes" && cat << EOF
- Defining $ac_tr_hdr
-EOF
-cat >> confdefs.h <<EOF
-#define $ac_tr_hdr 1
-EOF
-}
-
-else
- echo "$ac_t""no" 1>&6
-fi
-done
-
-
-echo $ac_n "checking for main in -lxml""... $ac_c" 1>&6
-echo "configure:5320: checking for main in -lxml" >&5
-ac_lib_var=`echo xml'_'main | sed 'y%./+-%__p_%'`
-
-xe_check_libs=" -lxml "
-cat > conftest.$ac_ext <<EOF
-#line 5325 "configure"
-#include "confdefs.h"
-
-int main() {
-main()
-; return 0; }
-EOF
-if { (eval echo configure:5332: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
- rm -rf conftest*
- eval "ac_cv_lib_$ac_lib_var=yes"
-else
- echo "configure: failed program was:" >&5
- cat conftest.$ac_ext >&5
- rm -rf conftest*
- eval "ac_cv_lib_$ac_lib_var=no"
-fi
-rm -f conftest*
-xe_check_libs=""
-
-if eval "test \"`echo '$ac_cv_lib_'$ac_lib_var`\" = yes" ; then
- echo "$ac_t""yes" 1>&6
- libs_gtk="-lxml $libs_gtk" && if test "$extra_verbose" = "yes"; then echo " Prepending \"-lxml\" to \$libs_gtk"; fi
-else
- echo "$ac_t""no" 1>&6
-fi
-
-
-
-echo $ac_n "checking for main in -lglade""... $ac_c" 1>&6
-echo "configure:5354: checking for main in -lglade" >&5
-ac_lib_var=`echo glade'_'main | sed 'y%./+-%__p_%'`
-
-xe_check_libs=" -lglade "
-cat > conftest.$ac_ext <<EOF
-#line 5359 "configure"
-#include "confdefs.h"
-
-int main() {
-main()
-; return 0; }
-EOF
-if { (eval echo configure:5366: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
- rm -rf conftest*
- eval "ac_cv_lib_$ac_lib_var=yes"
-else
- echo "configure: failed program was:" >&5
- cat conftest.$ac_ext >&5
- rm -rf conftest*
- eval "ac_cv_lib_$ac_lib_var=no"
-fi
-rm -f conftest*
-xe_check_libs=""
-
-if eval "test \"`echo '$ac_cv_lib_'$ac_lib_var`\" = yes" ; then
- echo "$ac_t""yes" 1>&6
- libs_gtk="-lglade $libs_gtk" && if test "$extra_verbose" = "yes"; then echo " Prepending \"-lglade\" to \$libs_gtk"; fi
-else
- echo "$ac_t""no" 1>&6
-fi
-
-
-
-echo $ac_n "checking for main in -lglade-gnome""... $ac_c" 1>&6
-echo "configure:5388: checking for main in -lglade-gnome" >&5
-ac_lib_var=`echo glade-gnome'_'main | sed 'y%./+-%__p_%'`
-
-xe_check_libs=" -lglade-gnome "
-cat > conftest.$ac_ext <<EOF
-#line 5393 "configure"
-#include "confdefs.h"
-
-int main() {
-main()
-; return 0; }
-EOF
-if { (eval echo configure:5400: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
- rm -rf conftest*
- eval "ac_cv_lib_$ac_lib_var=yes"
-else
- echo "configure: failed program was:" >&5
- cat conftest.$ac_ext >&5
- rm -rf conftest*
- eval "ac_cv_lib_$ac_lib_var=no"
-fi
-rm -f conftest*
-xe_check_libs=""
-
-if eval "test \"`echo '$ac_cv_lib_'$ac_lib_var`\" = yes" ; then
- echo "$ac_t""yes" 1>&6
- libs_gtk="-lglade-gnome $libs_gtk" && if test "$extra_verbose" = "yes"; then echo " Prepending \"-lglade-gnome\" to \$libs_gtk"; fi
-else
- echo "$ac_t""no" 1>&6
-fi
-
-
- cat > conftest.$ac_ext <<EOF
-#line 5421 "configure"
-#include "confdefs.h"
-#include <glade/glade-xml.h>
-EOF
-if (eval "$ac_cpp conftest.$ac_ext") 2>&5 |
- egrep "char \*txtdomain;" >/dev/null 2>&1; then
- rm -rf conftest*
- echo "$ac_t""yes" 1>&6
- { test "$extra_verbose" = "yes" && cat << \EOF
- Defining LIBGLADE_XML_TXTDOMAIN = 1
-EOF
-cat >> confdefs.h <<\EOF
-#define LIBGLADE_XML_TXTDOMAIN 1
-EOF
-}
-
-else
- rm -rf conftest*
- echo "$ac_t""no" 1>&6
-fi
-rm -f conftest*
-
- CFLAGS="${OLD_CFLAGS}"
- CPPFLAGS="${OLD_CPPFLAGS}"
- LDFLAGS="${OLD_LDFLAGS}"
-fi
-
-
-if test "$with_x11" != "no"; then
- test "$x_includes $x_libraries" != "NONE NONE" && \
- window_system=x11 with_x11=yes
-
-
- if test "$x_includes $x_libraries" = "NONE NONE" \
- -a -n "$OPENWINHOME" \
- -a "$OPENWINHOME" != "/usr/openwin" \
- -a -d "$OPENWINHOME"; then
- test -d "$OPENWINHOME/lib" && x_libraries="$OPENWINHOME/lib"
- test -d "$OPENWINHOME/include" && x_includes="$OPENWINHOME/include"
- test -d "$OPENWINHOME/share/include" && x_includes="$OPENWINHOME/share/include"
- fi
-
- if test "$x_includes" = "NONE"; then
- for dir in "/usr/X11" "/usr/X11R6"; do
- if test -d "$dir/include/X11"; then x_includes="$dir/include"; break; fi
- done
- fi
-
- if test "$x_libraries" = "NONE"; then
- for dir in "/usr/X11/lib" "/usr/X11R6/lib" "/usr/lib/X11R6"; do
- if test -r "$dir/libX11.a"; then x_libraries="$dir"; break; fi
- done
- fi
-
- # If we find X, set shell vars x_includes and x_libraries to the
-# paths, otherwise set no_x=yes.
-# Uses ac_ vars as temps to allow command line to override cache and checks.
-# --without-x overrides everything else, but does not touch the cache.
-echo $ac_n "checking for X""... $ac_c" 1>&6
-echo "configure:5480: checking for X" >&5
-
-# Check whether --with-x or --without-x was given.
-if test "${with_x+set}" = set; then
- withval="$with_x"
- :
-fi
-
-# $have_x is `yes', `no', `disabled', or empty when we do not yet know.
-if test "x$with_x" = xno; then
- # The user explicitly disabled X.
- have_x=disabled
-else
- if test "x$x_includes" != xNONE && test "x$x_libraries" != xNONE; then
- # Both variables are already set.
- have_x=yes
- else
-
-# One or both of the vars are not set, and there is no cached value.
-ac_x_includes=NO ac_x_libraries=NO
-rm -fr conftestdir
-if mkdir conftestdir; then
- cd conftestdir
- # Make sure to not put "make" in the Imakefile rules, since we grep it out.
- cat > Imakefile <<'EOF'
-acfindx:
- @echo 'ac_im_incroot="${INCROOT}"; ac_im_usrlibdir="${USRLIBDIR}"; ac_im_libdir="${LIBDIR}"'
-EOF
- if (xmkmf) >/dev/null 2>/dev/null && test -f Makefile; then
- # GNU make sometimes prints "make[1]: Entering...", which would confuse us.
- eval `${MAKE-make} acfindx 2>/dev/null | grep -v make`
- # Open Windows xmkmf reportedly sets LIBDIR instead of USRLIBDIR.
- for ac_extension in a so sl; do
- if test ! -f $ac_im_usrlibdir/libX11.$ac_extension &&
- test -f $ac_im_libdir/libX11.$ac_extension; then
- ac_im_usrlibdir=$ac_im_libdir; break
- fi
- done
- # Screen out bogus values from the imake configuration. They are
- # bogus both because they are the default anyway, and because
- # using them would break gcc on systems where it needs fixed includes.
- case "$ac_im_incroot" in
- /usr/include) ;;
- *) test -f "$ac_im_incroot/X11/Xos.h" && ac_x_includes="$ac_im_incroot" ;;
- esac
- case "$ac_im_usrlibdir" in
- /usr/lib | /lib) ;;
- *) test -d "$ac_im_usrlibdir" && ac_x_libraries="$ac_im_usrlibdir" ;;
- esac
- fi
- cd ..
- rm -fr conftestdir
-fi
-
-if test "$ac_x_includes" = NO; then
- # Guess where to find include files, by looking for this one X11 .h file.
- test -z "$x_direct_test_include" && x_direct_test_include=X11/Intrinsic.h
-
- # First, try using that file with no special directory specified.
-cat > conftest.$ac_ext <<EOF
-#line 5540 "configure"
-#include "confdefs.h"
-#include <$x_direct_test_include>
-EOF
-ac_try="$ac_cpp conftest.$ac_ext >/dev/null 2>conftest.out"
-{ (eval echo configure:5545: \"$ac_try\") 1>&5; (eval $ac_try) 2>&5; }
-ac_err=`grep -v '^ *+' conftest.out | grep -v "^conftest.${ac_ext}\$"`
-if test -z "$ac_err"; then
- rm -rf conftest*
- # We can compile using X headers with no special include directory.
-ac_x_includes=
-else
- echo "$ac_err" >&5
- echo "configure: failed program was:" >&5
- cat conftest.$ac_ext >&5
- rm -rf conftest*
- # Look for the header file in a standard set of common directories.
-# Check X11 before X11Rn because it is often a symlink to the current release.
- for ac_dir in \
- /usr/X11/include \
- /usr/X11R6/include \
- /usr/X11R5/include \
- /usr/X11R4/include \
- \
- /usr/include/X11 \
- /usr/include/X11R6 \
- /usr/include/X11R5 \
- /usr/include/X11R4 \
- \
- /usr/local/X11/include \
- /usr/local/X11R6/include \
- /usr/local/X11R5/include \
- /usr/local/X11R4/include \
- \
- /usr/local/include/X11 \
- /usr/local/include/X11R6 \
- /usr/local/include/X11R5 \
- /usr/local/include/X11R4 \
- \
- /usr/X386/include \
- /usr/x386/include \
- /usr/XFree86/include/X11 \
- \
- /usr/include \
- /usr/local/include \
- /usr/unsupported/include \
- /usr/athena/include \
- /usr/local/x11r5/include \
- /usr/lpp/Xamples/include \
- \
- /usr/openwin/include \
- /usr/openwin/share/include \
- ; \
- do
- if test -r "$ac_dir/$x_direct_test_include"; then
- ac_x_includes=$ac_dir
- break
- fi
- done
-fi
-rm -f conftest*
-fi # $ac_x_includes = NO
-
-if test "$ac_x_libraries" = NO; then
- # Check for the libraries.
-
- test -z "$x_direct_test_library" && x_direct_test_library=Xt
- test -z "$x_direct_test_function" && x_direct_test_function=XtMalloc
-
- # See if we find them without any special options.
- # Don't add to $LIBS permanently.
- ac_save_LIBS="$LIBS"
- LIBS="-l$x_direct_test_library $LIBS"
-cat > conftest.$ac_ext <<EOF
-#line 5614 "configure"
-#include "confdefs.h"
-
-int main() {
-${x_direct_test_function}()
-; return 0; }
-EOF
-if { (eval echo configure:5621: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
- rm -rf conftest*
- LIBS="$ac_save_LIBS"
-# We can link X programs with no special library path.
-ac_x_libraries=
-else
- echo "configure: failed program was:" >&5
- cat conftest.$ac_ext >&5
- rm -rf conftest*
- LIBS="$ac_save_LIBS"
-# First see if replacing the include by lib works.
-# Check X11 before X11Rn because it is often a symlink to the current release.
-for ac_dir in `echo "$ac_x_includes" | sed s/include/lib/` \
- /usr/X11/lib \
- /usr/X11R6/lib \
- /usr/X11R5/lib \
- /usr/X11R4/lib \
- \
- /usr/lib/X11 \
- /usr/lib/X11R6 \
- /usr/lib/X11R5 \
- /usr/lib/X11R4 \
- \
- /usr/local/X11/lib \
- /usr/local/X11R6/lib \
- /usr/local/X11R5/lib \
- /usr/local/X11R4/lib \
- \
- /usr/local/lib/X11 \
- /usr/local/lib/X11R6 \
- /usr/local/lib/X11R5 \
- /usr/local/lib/X11R4 \
- \
- /usr/X386/lib \
- /usr/x386/lib \
- /usr/XFree86/lib/X11 \
- \
- /usr/lib \
- /usr/local/lib \
- /usr/unsupported/lib \
- /usr/athena/lib \
- /usr/local/x11r5/lib \
- /usr/lpp/Xamples/lib \
- /lib/usr/lib/X11 \
- \
- /usr/openwin/lib \
- /usr/openwin/share/lib \
- ; \
-do
- for ac_extension in a so sl; do
- if test -r $ac_dir/lib${x_direct_test_library}.$ac_extension; then
- ac_x_libraries=$ac_dir
- break 2
- fi
- done
-done
-fi
-rm -f conftest*
-fi # $ac_x_libraries = NO
-
-if test "$ac_x_includes" = NO || test "$ac_x_libraries" = NO; then
- # Didn't find X anywhere. Cache the known absence of X.
- ac_cv_have_x="have_x=no"
-else
- # Record where we found X for the cache.
- ac_cv_have_x="have_x=yes \
- ac_x_includes=$ac_x_includes ac_x_libraries=$ac_x_libraries"
-fi
- fi
- eval "$ac_cv_have_x"
-fi # $with_x != no
-
-if test "$have_x" != yes; then
- echo "$ac_t""$have_x" 1>&6
- no_x=yes
-else
- # If each of the values was on the command line, it overrides each guess.
- test "x$x_includes" = xNONE && x_includes=$ac_x_includes
- test "x$x_libraries" = xNONE && x_libraries=$ac_x_libraries
- # Update the cache value to reflect the command line values.
- ac_cv_have_x="have_x=yes \
- ac_x_includes=$x_includes ac_x_libraries=$x_libraries"
- echo "$ac_t""libraries $x_libraries, headers $x_includes" 1>&6
-fi
-
-if test "$no_x" = yes; then
- # Not all programs may use this symbol, but it does not hurt to define it.
- { test "$extra_verbose" = "yes" && cat << \EOF
- Defining X_DISPLAY_MISSING
-EOF
-cat >> confdefs.h <<\EOF
-#define X_DISPLAY_MISSING 1
-EOF
-}
-
- X_CFLAGS= X_PRE_LIBS= X_LIBS= X_EXTRA_LIBS=
-else
- if test -n "$x_includes"; then
- X_CFLAGS="$X_CFLAGS -I$x_includes"
- fi
-
- # It would also be nice to do this for all -L options, not just this one.
- if test -n "$x_libraries"; then
- X_LIBS="$X_LIBS -L$x_libraries"
- # For Solaris; some versions of Sun CC require a space after -R and
- # others require no space. Words are not sufficient . . . .
- case "`(uname -sr) 2>/dev/null`" in
- "SunOS 5"*)
- echo $ac_n "checking whether -R must be followed by a space""... $ac_c" 1>&6
-echo "configure:5730: checking whether -R must be followed by a space" >&5
- ac_xsave_LIBS="$LIBS"; LIBS="$LIBS -R$x_libraries"
- cat > conftest.$ac_ext <<EOF
-#line 5733 "configure"
-#include "confdefs.h"
-
-int main() {
-
-; return 0; }
-EOF
-if { (eval echo configure:5740: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
- rm -rf conftest*
- ac_R_nospace=yes
-else
- echo "configure: failed program was:" >&5
- cat conftest.$ac_ext >&5
- rm -rf conftest*
- ac_R_nospace=no
-fi
-rm -f conftest*
- if test $ac_R_nospace = yes; then
- echo "$ac_t""no" 1>&6
- X_LIBS="$X_LIBS -R$x_libraries"
- else
- LIBS="$ac_xsave_LIBS -R $x_libraries"
- cat > conftest.$ac_ext <<EOF
-#line 5756 "configure"
-#include "confdefs.h"
-
-int main() {
-
-; return 0; }
-EOF
-if { (eval echo configure:5763: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
- rm -rf conftest*
- ac_R_space=yes
-else
- echo "configure: failed program was:" >&5
- cat conftest.$ac_ext >&5
- rm -rf conftest*
- ac_R_space=no
-fi
-rm -f conftest*
- if test $ac_R_space = yes; then
- echo "$ac_t""yes" 1>&6
- X_LIBS="$X_LIBS -R $x_libraries"
- else
- echo "$ac_t""neither works" 1>&6
- fi
- fi
- LIBS="$ac_xsave_LIBS"
- esac
- fi
-
- # Check for system-dependent libraries X programs must link with.
- # Do this before checking for the system-independent R6 libraries
- # (-lICE), since we may need -lsocket or whatever for X linking.
-
- if test "$ISC" = yes; then
- X_EXTRA_LIBS="$X_EXTRA_LIBS -lnsl_s -linet"
- else
- # Martyn.Johnson@cl.cam.ac.uk says this is needed for Ultrix, if the X
- # libraries were built with DECnet support. And karl@cs.umb.edu says
- # the Alpha needs dnet_stub (dnet does not exist).
- if test "$with_dnet" = "no" ; then
-ac_cv_lib_dnet_dnet_ntoa=no
-else
-
-echo $ac_n "checking for dnet_ntoa in -ldnet""... $ac_c" 1>&6
-echo "configure:5799: checking for dnet_ntoa in -ldnet" >&5
-ac_lib_var=`echo dnet'_'dnet_ntoa | sed 'y%./+-%__p_%'`
-
-xe_check_libs=" -ldnet "
-cat > conftest.$ac_ext <<EOF
-#line 5804 "configure"
-#include "confdefs.h"
-/* Override any gcc2 internal prototype to avoid an error. */
-/* We use char because int might match the return type of a gcc2
- builtin and then its argument prototype would still apply. */
-char dnet_ntoa();
-
-int main() {
-dnet_ntoa()
-; return 0; }
-EOF
-if { (eval echo configure:5815: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
- rm -rf conftest*
- eval "ac_cv_lib_$ac_lib_var=yes"
-else
- echo "configure: failed program was:" >&5
- cat conftest.$ac_ext >&5
- rm -rf conftest*
- eval "ac_cv_lib_$ac_lib_var=no"
-fi
-rm -f conftest*
-xe_check_libs=""
-
-if eval "test \"`echo '$ac_cv_lib_'$ac_lib_var`\" = yes" ; then
- echo "$ac_t""yes" 1>&6
- X_EXTRA_LIBS="$X_EXTRA_LIBS -ldnet"
-else
- echo "$ac_t""no" 1>&6
-fi
-
-fi
-
- if test $ac_cv_lib_dnet_dnet_ntoa = no; then
-
-echo $ac_n "checking for dnet_ntoa in -ldnet_stub""... $ac_c" 1>&6
-echo "configure:5839: checking for dnet_ntoa in -ldnet_stub" >&5
-ac_lib_var=`echo dnet_stub'_'dnet_ntoa | sed 'y%./+-%__p_%'`
-
-xe_check_libs=" -ldnet_stub "
-cat > conftest.$ac_ext <<EOF
-#line 5844 "configure"
-#include "confdefs.h"
-/* Override any gcc2 internal prototype to avoid an error. */
-/* We use char because int might match the return type of a gcc2
- builtin and then its argument prototype would still apply. */
-char dnet_ntoa();
-
-int main() {
-dnet_ntoa()
-; return 0; }
-EOF
-if { (eval echo configure:5855: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
- rm -rf conftest*
- eval "ac_cv_lib_$ac_lib_var=yes"
-else
- echo "configure: failed program was:" >&5
- cat conftest.$ac_ext >&5
- rm -rf conftest*
- eval "ac_cv_lib_$ac_lib_var=no"
-fi
-rm -f conftest*
-xe_check_libs=""
-
-if eval "test \"`echo '$ac_cv_lib_'$ac_lib_var`\" = yes" ; then
- echo "$ac_t""yes" 1>&6
- X_EXTRA_LIBS="$X_EXTRA_LIBS -ldnet_stub"
-else
- echo "$ac_t""no" 1>&6
-fi
-
-
- fi
-
- # msh@cis.ufl.edu says -lnsl (and -lsocket) are needed for his 386/AT,
- # to get the SysV transport functions.
- # chad@anasazi.com says the Pyramis MIS-ES running DC/OSx (SVR4)
- # needs -lnsl.
- # The nsl library prevents programs from opening the X display
- # on Irix 5.2, according to dickey@clark.net.
- echo $ac_n "checking for gethostbyname""... $ac_c" 1>&6
-echo "configure:5884: checking for gethostbyname" >&5
-
-cat > conftest.$ac_ext <<EOF
-#line 5887 "configure"
-#include "confdefs.h"
-/* System header to define __stub macros and hopefully few prototypes,
- which can conflict with char gethostbyname(); below. */
-#include <assert.h>
-/* Override any gcc2 internal prototype to avoid an error. */
-/* We use char because int might match the return type of a gcc2
- builtin and then its argument prototype would still apply. */
-char gethostbyname();
-
-int main() {
-
-/* The GNU C library defines this for functions which it implements
- to always fail with ENOSYS. Some functions are actually named
- something starting with __ and the normal name is an alias. */
-#if defined (__stub_gethostbyname) || defined (__stub___gethostbyname)
-choke me
-#else
-gethostbyname();
-#endif
-
-; return 0; }
-EOF
-if { (eval echo configure:5910: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
- rm -rf conftest*
- eval "ac_cv_func_gethostbyname=yes"
-else
- echo "configure: failed program was:" >&5
- cat conftest.$ac_ext >&5
- rm -rf conftest*
- eval "ac_cv_func_gethostbyname=no"
-fi
-rm -f conftest*
-
-if eval "test \"`echo '$ac_cv_func_'gethostbyname`\" = yes"; then
- echo "$ac_t""yes" 1>&6
- :
-else
- echo "$ac_t""no" 1>&6
-fi
-
- if test $ac_cv_func_gethostbyname = no; then
-
-echo $ac_n "checking for gethostbyname in -lnsl""... $ac_c" 1>&6
-echo "configure:5931: checking for gethostbyname in -lnsl" >&5
-ac_lib_var=`echo nsl'_'gethostbyname | sed 'y%./+-%__p_%'`
-
-xe_check_libs=" -lnsl "
-cat > conftest.$ac_ext <<EOF
-#line 5936 "configure"
-#include "confdefs.h"
-/* Override any gcc2 internal prototype to avoid an error. */
-/* We use char because int might match the return type of a gcc2
- builtin and then its argument prototype would still apply. */
-char gethostbyname();
-
-int main() {
-gethostbyname()
-; return 0; }
-EOF
-if { (eval echo configure:5947: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
- rm -rf conftest*
- eval "ac_cv_lib_$ac_lib_var=yes"
-else
- echo "configure: failed program was:" >&5
- cat conftest.$ac_ext >&5
- rm -rf conftest*
- eval "ac_cv_lib_$ac_lib_var=no"
-fi
-rm -f conftest*
-xe_check_libs=""
-
-if eval "test \"`echo '$ac_cv_lib_'$ac_lib_var`\" = yes" ; then
- echo "$ac_t""yes" 1>&6
- X_EXTRA_LIBS="$X_EXTRA_LIBS -lnsl"
-else
- echo "$ac_t""no" 1>&6
-fi
-
-
- fi
-
- # lieder@skyler.mavd.honeywell.com says without -lsocket,
- # socket/setsockopt and other routines are undefined under SCO ODT
- # 2.0. But -lsocket is broken on IRIX 5.2 (and is not necessary
- # on later versions), says simon@lia.di.epfl.ch: it contains
- # gethostby* variants that don't use the nameserver (or something).
- # -lsocket must be given before -lnsl if both are needed.
- # We assume that if connect needs -lnsl, so does gethostbyname.
- echo $ac_n "checking for connect""... $ac_c" 1>&6
-echo "configure:5977: checking for connect" >&5
-
-cat > conftest.$ac_ext <<EOF
-#line 5980 "configure"
-#include "confdefs.h"
-/* System header to define __stub macros and hopefully few prototypes,
- which can conflict with char connect(); below. */
-#include <assert.h>
-/* Override any gcc2 internal prototype to avoid an error. */
-/* We use char because int might match the return type of a gcc2
- builtin and then its argument prototype would still apply. */
-char connect();
-
-int main() {
-
-/* The GNU C library defines this for functions which it implements
- to always fail with ENOSYS. Some functions are actually named
- something starting with __ and the normal name is an alias. */
-#if defined (__stub_connect) || defined (__stub___connect)
-choke me
-#else
-connect();
-#endif
-
-; return 0; }
-EOF
-if { (eval echo configure:6003: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
- rm -rf conftest*
- eval "ac_cv_func_connect=yes"
-else
- echo "configure: failed program was:" >&5
- cat conftest.$ac_ext >&5
- rm -rf conftest*
- eval "ac_cv_func_connect=no"
-fi
-rm -f conftest*
-
-if eval "test \"`echo '$ac_cv_func_'connect`\" = yes"; then
- echo "$ac_t""yes" 1>&6
- :
-else
- echo "$ac_t""no" 1>&6
-fi
-
- if test $ac_cv_func_connect = no; then
-
-xe_msg_checking="for connect in -lsocket"
-test -n "$X_EXTRA_LIBS" && xe_msg_checking="$xe_msg_checking using extra libs $X_EXTRA_LIBS"
-echo $ac_n "checking "$xe_msg_checking"""... $ac_c" 1>&6
-echo "configure:6026: checking "$xe_msg_checking"" >&5
-ac_lib_var=`echo socket'_'connect | sed 'y%./+-%__p_%'`
-
-xe_check_libs=" -lsocket $X_EXTRA_LIBS"
-cat > conftest.$ac_ext <<EOF
-#line 6031 "configure"
-#include "confdefs.h"
-/* Override any gcc2 internal prototype to avoid an error. */
-/* We use char because int might match the return type of a gcc2
- builtin and then its argument prototype would still apply. */
-char connect();
-
-int main() {
-connect()
-; return 0; }
-EOF
-if { (eval echo configure:6042: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
- rm -rf conftest*
- eval "ac_cv_lib_$ac_lib_var=yes"
-else
- echo "configure: failed program was:" >&5
- cat conftest.$ac_ext >&5
- rm -rf conftest*
- eval "ac_cv_lib_$ac_lib_var=no"
-fi
-rm -f conftest*
-xe_check_libs=""
-
-if eval "test \"`echo '$ac_cv_lib_'$ac_lib_var`\" = yes" ; then
- echo "$ac_t""yes" 1>&6
- X_EXTRA_LIBS="-lsocket $X_EXTRA_LIBS"
-else
- echo "$ac_t""no" 1>&6
-fi
-
-
- fi
-
- # gomez@mi.uni-erlangen.de says -lposix is necessary on A/UX.
- echo $ac_n "checking for remove""... $ac_c" 1>&6
-echo "configure:6066: checking for remove" >&5
-
-cat > conftest.$ac_ext <<EOF
-#line 6069 "configure"
-#include "confdefs.h"
-/* System header to define __stub macros and hopefully few prototypes,
- which can conflict with char remove(); below. */
-#include <assert.h>
-/* Override any gcc2 internal prototype to avoid an error. */
-/* We use char because int might match the return type of a gcc2
- builtin and then its argument prototype would still apply. */
-char remove();
-
-int main() {
-
-/* The GNU C library defines this for functions which it implements
- to always fail with ENOSYS. Some functions are actually named
- something starting with __ and the normal name is an alias. */
-#if defined (__stub_remove) || defined (__stub___remove)
-choke me
-#else
-remove();
-#endif
-
-; return 0; }
-EOF
-if { (eval echo configure:6092: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
- rm -rf conftest*
- eval "ac_cv_func_remove=yes"
-else
- echo "configure: failed program was:" >&5
- cat conftest.$ac_ext >&5
- rm -rf conftest*
- eval "ac_cv_func_remove=no"
-fi
-rm -f conftest*
-
-if eval "test \"`echo '$ac_cv_func_'remove`\" = yes"; then
- echo "$ac_t""yes" 1>&6
- :
-else
- echo "$ac_t""no" 1>&6
-fi
-
- if test $ac_cv_func_remove = no; then
-
-echo $ac_n "checking for remove in -lposix""... $ac_c" 1>&6
-echo "configure:6113: checking for remove in -lposix" >&5
-ac_lib_var=`echo posix'_'remove | sed 'y%./+-%__p_%'`
-
-xe_check_libs=" -lposix "
-cat > conftest.$ac_ext <<EOF
-#line 6118 "configure"
-#include "confdefs.h"
-/* Override any gcc2 internal prototype to avoid an error. */
-/* We use char because int might match the return type of a gcc2
- builtin and then its argument prototype would still apply. */
-char remove();
-
-int main() {
-remove()
-; return 0; }
-EOF
-if { (eval echo configure:6129: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
- rm -rf conftest*
- eval "ac_cv_lib_$ac_lib_var=yes"
-else
- echo "configure: failed program was:" >&5
- cat conftest.$ac_ext >&5
- rm -rf conftest*
- eval "ac_cv_lib_$ac_lib_var=no"
-fi
-rm -f conftest*
-xe_check_libs=""
-
-if eval "test \"`echo '$ac_cv_lib_'$ac_lib_var`\" = yes" ; then
- echo "$ac_t""yes" 1>&6
- X_EXTRA_LIBS="$X_EXTRA_LIBS -lposix"
-else
- echo "$ac_t""no" 1>&6
-fi
-
-
- fi
-
- # BSDI BSD/OS 2.1 needs -lipc for XOpenDisplay.
- echo $ac_n "checking for shmat""... $ac_c" 1>&6
-echo "configure:6153: checking for shmat" >&5
-
-cat > conftest.$ac_ext <<EOF
-#line 6156 "configure"
-#include "confdefs.h"
-/* System header to define __stub macros and hopefully few prototypes,
- which can conflict with char shmat(); below. */
-#include <assert.h>
-/* Override any gcc2 internal prototype to avoid an error. */
-/* We use char because int might match the return type of a gcc2
- builtin and then its argument prototype would still apply. */
-char shmat();
-
-int main() {
-
-/* The GNU C library defines this for functions which it implements
- to always fail with ENOSYS. Some functions are actually named
- something starting with __ and the normal name is an alias. */
-#if defined (__stub_shmat) || defined (__stub___shmat)
-choke me
-#else
-shmat();
-#endif
-
-; return 0; }
-EOF
-if { (eval echo configure:6179: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
- rm -rf conftest*
- eval "ac_cv_func_shmat=yes"
-else
- echo "configure: failed program was:" >&5
- cat conftest.$ac_ext >&5
- rm -rf conftest*
- eval "ac_cv_func_shmat=no"
-fi
-rm -f conftest*
-
-if eval "test \"`echo '$ac_cv_func_'shmat`\" = yes"; then
- echo "$ac_t""yes" 1>&6
- :
-else
- echo "$ac_t""no" 1>&6
-fi
-
- if test $ac_cv_func_shmat = no; then
-
-echo $ac_n "checking for shmat in -lipc""... $ac_c" 1>&6
-echo "configure:6200: checking for shmat in -lipc" >&5
-ac_lib_var=`echo ipc'_'shmat | sed 'y%./+-%__p_%'`
-
-xe_check_libs=" -lipc "
-cat > conftest.$ac_ext <<EOF
-#line 6205 "configure"
-#include "confdefs.h"
-/* Override any gcc2 internal prototype to avoid an error. */
-/* We use char because int might match the return type of a gcc2
- builtin and then its argument prototype would still apply. */
-char shmat();
-
-int main() {
-shmat()
-; return 0; }
-EOF
-if { (eval echo configure:6216: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
- rm -rf conftest*
- eval "ac_cv_lib_$ac_lib_var=yes"
-else
- echo "configure: failed program was:" >&5
- cat conftest.$ac_ext >&5
- rm -rf conftest*
- eval "ac_cv_lib_$ac_lib_var=no"
-fi
-rm -f conftest*
-xe_check_libs=""
-
-if eval "test \"`echo '$ac_cv_lib_'$ac_lib_var`\" = yes" ; then
- echo "$ac_t""yes" 1>&6
- X_EXTRA_LIBS="$X_EXTRA_LIBS -lipc"
-else
- echo "$ac_t""no" 1>&6
-fi
-
-
- fi
- fi
-
- # Check for libraries that X11R6 Xt/Xaw programs need.
- ac_save_LDFLAGS="$LDFLAGS"
- test -n "$x_libraries" && LDFLAGS="$LDFLAGS -L$x_libraries"
- # SM needs ICE to (dynamically) link under SunOS 4.x (so we have to
- # check for ICE first), but we must link in the order -lSM -lICE or
- # we get undefined symbols. So assume we have SM if we have ICE.
- # These have to be linked with before -lX11, unlike the other
- # libraries we check for below, so use a different variable.
- # --interran@uluru.Stanford.EDU, kb@cs.umb.edu.
-
-xe_msg_checking="for IceConnectionNumber in -lICE"
-test -n "$X_EXTRA_LIBS" && xe_msg_checking="$xe_msg_checking using extra libs $X_EXTRA_LIBS"
-echo $ac_n "checking "$xe_msg_checking"""... $ac_c" 1>&6
-echo "configure:6252: checking "$xe_msg_checking"" >&5
-ac_lib_var=`echo ICE'_'IceConnectionNumber | sed 'y%./+-%__p_%'`
-
-xe_check_libs=" -lICE $X_EXTRA_LIBS"
-cat > conftest.$ac_ext <<EOF
-#line 6257 "configure"
-#include "confdefs.h"
-/* Override any gcc2 internal prototype to avoid an error. */
-/* We use char because int might match the return type of a gcc2
- builtin and then its argument prototype would still apply. */
-char IceConnectionNumber();
-
-int main() {
-IceConnectionNumber()
-; return 0; }
-EOF
-if { (eval echo configure:6268: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
- rm -rf conftest*
- eval "ac_cv_lib_$ac_lib_var=yes"
-else
- echo "configure: failed program was:" >&5
- cat conftest.$ac_ext >&5
- rm -rf conftest*
- eval "ac_cv_lib_$ac_lib_var=no"
-fi
-rm -f conftest*
-xe_check_libs=""
-
-if eval "test \"`echo '$ac_cv_lib_'$ac_lib_var`\" = yes" ; then
- echo "$ac_t""yes" 1>&6
- X_PRE_LIBS="$X_PRE_LIBS -lSM -lICE"
-else
- echo "$ac_t""no" 1>&6
-fi
-
-
- LDFLAGS="$ac_save_LDFLAGS"
-
-fi
- # Autoconf claims to find X library and include dirs for us.
- if test "$no_x" = "yes"
- then with_x11=no window_system=none HAVE_X_WINDOWS=no
- else with_x11=yes window_system=x11 HAVE_X_WINDOWS=yes
- fi
-fi
-
-
-if test "$with_x11" = "yes"; then
- { test "$extra_verbose" = "yes" && cat << \EOF
- Defining HAVE_X_WINDOWS
-EOF
-cat >> confdefs.h <<\EOF
-#define HAVE_X_WINDOWS 1
-EOF
-}
-
- MAKE_SUBDIR="$MAKE_SUBDIR lwlib" && if test "$extra_verbose" = "yes"; then echo " Appending \"lwlib\" to \$MAKE_SUBDIR"; fi
- SRC_SUBDIR_DEPS="$SRC_SUBDIR_DEPS lwlib" && if test "$extra_verbose" = "yes"; then echo " Appending \"lwlib\" to \$SRC_SUBDIR_DEPS"; fi
-
- for lib_dir in "/usr/dt/lib" "/usr/lib/Motif2.1" "/usr/lib/Motif1.2" "/usr/lib/Motif1.1"; do
- inc_dir=`echo $lib_dir | sed -e 's/lib/include/'`
- if test -d "$lib_dir" -a -d "$inc_dir"; then
- case "$x_libraries" in *"$lib_dir"* ) ;; *)
- x_libraries="$lib_dir $x_libraries"
- X_LIBS="-L${lib_dir} $X_LIBS" && if test "$extra_verbose" = "yes"; then echo " Prepending \"-L${lib_dir}\" to \$X_LIBS"; fi ;;
- esac
- case "$x_includes" in "$inc_dir"* ) ;; *)
- x_includes="$inc_dir $x_includes"
- X_CFLAGS="-I${inc_dir} $X_CFLAGS" && if test "$extra_verbose" = "yes"; then echo " Prepending \"-I${inc_dir}\" to \$X_CFLAGS"; fi ;;
- esac
- break; fi
- done
-
- for rel in "X11R6" "X11R5" "X11R4"; do
- lib_dir="/usr/contrib/$rel/lib" inc_dir="/usr/contrib/$rel/include"
- if test -d "$lib_dir" -a -d "$inc_dir"; then
- case "$x_libraries" in *"$lib_dir"* ) ;; *)
- x_libraries="$x_libraries $lib_dir"
- X_LIBS="$X_LIBS -L${lib_dir}" && if test "$extra_verbose" = "yes"; then echo " Appending \"-L${lib_dir}\" to \$X_LIBS"; fi
- esac
- case "$x_includes" in "$inc_dir"* ) ;; *)
- x_includes="$x_includes $inc_dir"
- X_CFLAGS="$X_CFLAGS -I${inc_dir}" && if test "$extra_verbose" = "yes"; then echo " Appending \"-I${inc_dir}\" to \$X_CFLAGS"; fi
- esac
- break; fi
- done
-
- case "$opsys" in
- decosf*) if test "$GCC" = yes -a -d /usr/shlib; then X_LIBS="$X_LIBS -L/usr/shlib" && if test "$extra_verbose" = "yes"; then echo " Appending \"-L/usr/shlib\" to \$X_LIBS"; fi; fi ;;
- esac
-
- ld_switch_x_site="$X_LIBS"
-
-
-if test "$add_runtime_path" = "yes" -a -n "$dash_r"; then
- ld_switch_site=`echo '' $ld_switch_site | sed -e 's:^ ::' -e "s/$dash_r[^ ]*//g"`
- ld_switch_x_site=`echo '' $ld_switch_x_site | sed -e 's:^ ::' -e "s/$dash_r[^ ]*//g"`
-
- runpath="" runpath_dirs=""
- if test -n "$LD_RUN_PATH"; then
- runpath="$LD_RUN_PATH"
- elif test "$GCC" = "yes"; then
- ld_switch_run_save="$ld_switch_run"; ld_switch_run=""
- echo "int main(int argc, char *argv[]) {return 0;}" > conftest.c
- xe_runpath_link='${CC-cc} -o conftest -v $CFLAGS '"$xe_ldflags"' conftest.$ac_ext 2>&1 1>/dev/null'
- for arg in `eval "$xe_runpath_link" | grep ' -L'`; do
- case "$arg" in P,* | -L* | -R* )
- for dir in `echo '' "$arg" | sed -e 's:^ ::' -e 's/^..//' -e 'y/:/ /'`; do
- {
-xe_runpath_dir="$dir"
- test "$xe_runpath_dir" != "/lib" -a \
- "$xe_runpath_dir" != "/usr/lib" -a \
- -n "`ls ${xe_runpath_dir}/*.s[ol] 2>/dev/null`" && \
- eval "$xe_add_unique_runpath_dir"
-}
- done ;;
- esac
- done
- ld_switch_run="$ld_switch_run_save"
- rm -f conftest*
- else
- for arg in $ld_switch_site $ld_switch_x_site; do
- case "$arg" in -L*) {
-xe_runpath_dir=`echo '' "$arg" | sed -e 's:^ ::' -e 's/^-L//'`
- test "$xe_runpath_dir" != "/lib" -a \
- "$xe_runpath_dir" != "/usr/lib" -a \
- -n "`ls ${xe_runpath_dir}/*.s[ol] 2>/dev/null`" && \
- eval "$xe_add_unique_runpath_dir"
-};; esac
- done
- if test "$opsys $need_motif" = "sol2 yes"; then
- xe_runpath_dir="/opt/SUNWdt/lib";
- eval "$xe_add_unique_runpath_dir";
- fi
- fi
- if test -n "$runpath"; then
- ld_switch_run="${dash_r}${runpath}"
-
-if test "$GCC" = "yes"; then
- set x $ld_switch_run; shift; ld_switch_run=""
- while test -n "$1"; do
- case $1 in
- -L | -l | -u ) ld_switch_run="$ld_switch_run $1 $2"; shift ;;
- -L* | -l* | -u* | -Wl* | -pg ) ld_switch_run="$ld_switch_run $1" ;;
- -Xlinker* ) ;;
- * ) ld_switch_run="$ld_switch_run -Xlinker $1" ;;
- esac
- shift
- done
-fi
- test "$extra_verbose" = "yes" && echo "Setting runpath to $runpath"
- fi
-fi
-
-
- if test "$extra_verbose" = "yes"; then
- echo; echo "X11 compilation variables:"
- for var in x_libraries x_includes X_CFLAGS X_LIBS X_PRE_LIBS X_EXTRA_LIBS; do eval "echo \"$var = '\$$var'\""; done
- echo
- fi
-
- bitmapdirs=
- if test "$x_includes" != NONE; then
- for i in $x_includes; do
- if test -d "$i/bitmaps"; then
- bitmapdirs="$i/bitmaps:$bitmapdirs"
- fi
- if test -d "$i/X11/bitmaps"; then
- bitmapdirs="$i/X11/bitmaps:$bitmapdirs"
- fi
- done
- bitmapdirs=`echo "$bitmapdirs" | sed s/.$//`
- fi
- test ! -z "$bitmapdirs" && { test "$extra_verbose" = "yes" && cat << EOF
- Defining BITMAPDIR = "$bitmapdirs"
-EOF
-cat >> confdefs.h <<EOF
-#define BITMAPDIR "$bitmapdirs"
-EOF
-}
-
-
- echo "checking for X defines extracted by xmkmf" 1>&6
-echo "configure:6435: checking for X defines extracted by xmkmf" >&5
- rm -fr conftestdir
- if mkdir conftestdir; then
- cd conftestdir
- cat > Imakefile <<'EOF'
-xetest:
- @echo ${PROTO_DEFINES} ${STD_DEFINES}
-EOF
- if (xmkmf) >/dev/null 2>/dev/null && test -f Makefile; then
- # GNU make sometimes prints "make[1]: Entering...", which would confuse us.
- xmkmf_defines=`${MAKE-make} xetest 2>/dev/null | grep -v make`
- fi
- cd ..
- rm -fr conftestdir
- for word in $xmkmf_defines; do
- case "$word" in
- -D__STDC__*) ;;
- -D* )
- sym=`echo '' $word | sed -e 's:^ *-D::' -e 's:=.*::'`
- case "$word" in
- -D*=* ) val=`echo '' $word | sed -e 's:^.*=::'` ;;
- * ) val=1 ;;
- esac
- if grep "^#define $sym " confdefs.h >/dev/null; then :; else
- if test "$val" = "1"
- then { test "$extra_verbose" = "yes" && cat << EOF
- Defining $sym
-EOF
-cat >> confdefs.h <<EOF
-#define $sym 1
-EOF
-}
-
- else { test "$extra_verbose" = "yes" && cat << EOF
- Defining $sym = $val
-EOF
-cat >> confdefs.h <<EOF
-#define $sym $val
-EOF
-}
-
- fi
- fi ;;
- esac
- done
- fi
-
- ac_safe=`echo "X11/Intrinsic.h" | sed 'y%./+-%__p_%'`
-echo $ac_n "checking for X11/Intrinsic.h""... $ac_c" 1>&6
-echo "configure:6484: checking for X11/Intrinsic.h" >&5
-
-cat > conftest.$ac_ext <<EOF
-#line 6487 "configure"
-#include "confdefs.h"
-#include <X11/Intrinsic.h>
-EOF
-ac_try="$ac_cpp conftest.$ac_ext >/dev/null 2>conftest.out"
-{ (eval echo configure:6492: \"$ac_try\") 1>&5; (eval $ac_try) 2>&5; }
-ac_err=`grep -v '^ *+' conftest.out | grep -v "^conftest.${ac_ext}\$"`
-if test -z "$ac_err"; then
- rm -rf conftest*
- eval "ac_cv_header_$ac_safe=yes"
-else
- echo "$ac_err" >&5
- echo "configure: failed program was:" >&5
- cat conftest.$ac_ext >&5
- rm -rf conftest*
- eval "ac_cv_header_$ac_safe=no"
-fi
-rm -f conftest*
-if eval "test \"`echo '$ac_cv_header_'$ac_safe`\" = yes"; then
- echo "$ac_t""yes" 1>&6
- :
-else
- echo "$ac_t""no" 1>&6
-{ echo "configure: error: "Unable to find X11 header files."" 1>&2; exit 1; }
-fi
-
-
-
-echo $ac_n "checking for XOpenDisplay in -lX11""... $ac_c" 1>&6
-echo "configure:6516: checking for XOpenDisplay in -lX11" >&5
-ac_lib_var=`echo X11'_'XOpenDisplay | sed 'y%./+-%__p_%'`
-
-xe_check_libs=" -lX11 "
-cat > conftest.$ac_ext <<EOF
-#line 6521 "configure"
-#include "confdefs.h"
-/* Override any gcc2 internal prototype to avoid an error. */
-/* We use char because int might match the return type of a gcc2
- builtin and then its argument prototype would still apply. */
-char XOpenDisplay();
-
-int main() {
-XOpenDisplay()
-; return 0; }
-EOF
-if { (eval echo configure:6532: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
- rm -rf conftest*
- eval "ac_cv_lib_$ac_lib_var=yes"
-else
- echo "configure: failed program was:" >&5
- cat conftest.$ac_ext >&5
- rm -rf conftest*
- eval "ac_cv_lib_$ac_lib_var=no"
-fi
-rm -f conftest*
-xe_check_libs=""
-
-if eval "test \"`echo '$ac_cv_lib_'$ac_lib_var`\" = yes" ; then
- echo "$ac_t""yes" 1>&6
- have_lib_x11=yes
-else
- echo "$ac_t""no" 1>&6
-fi
-
-
- if test "$have_lib_x11" != "yes"; then
-
-xe_msg_checking="for XGetFontProperty in -lX11"
-test -n "-b i486-linuxaout" && xe_msg_checking="$xe_msg_checking using extra libs -b i486-linuxaout"
-echo $ac_n "checking "$xe_msg_checking"""... $ac_c" 1>&6
-echo "configure:6557: checking "$xe_msg_checking"" >&5
-ac_lib_var=`echo X11'_'XGetFontProperty | sed 'y%./+-%__p_%'`
-
-xe_check_libs=" -lX11 -b i486-linuxaout"
-cat > conftest.$ac_ext <<EOF
-#line 6562 "configure"
-#include "confdefs.h"
-/* Override any gcc2 internal prototype to avoid an error. */
-/* We use char because int might match the return type of a gcc2
- builtin and then its argument prototype would still apply. */
-char XGetFontProperty();
-
-int main() {
-XGetFontProperty()
-; return 0; }
-EOF
-if { (eval echo configure:6573: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
- rm -rf conftest*
- eval "ac_cv_lib_$ac_lib_var=yes"
-else
- echo "configure: failed program was:" >&5
- cat conftest.$ac_ext >&5
- rm -rf conftest*
- eval "ac_cv_lib_$ac_lib_var=no"
-fi
-rm -f conftest*
-xe_check_libs=""
-
-if eval "test \"`echo '$ac_cv_lib_'$ac_lib_var`\" = yes" ; then
- echo "$ac_t""yes" 1>&6
- ld_switch_x_site="-b i486-linuxaout $ld_switch_x_site"
-else
- echo "$ac_t""no" 1>&6
-{ echo "configure: error: "Unable to find X11 libraries."" 1>&2; exit 1; }
-fi
-
-
- fi
- libs_x="-lX11"
- test "$extra_verbose" = "yes" && echo " Setting libs_x to \"-lX11\""
-
-
-echo $ac_n "checking for XShapeSelectInput in -lXext""... $ac_c" 1>&6
-echo "configure:6600: checking for XShapeSelectInput in -lXext" >&5
-ac_lib_var=`echo Xext'_'XShapeSelectInput | sed 'y%./+-%__p_%'`
-
-xe_check_libs=" -lXext "
-cat > conftest.$ac_ext <<EOF
-#line 6605 "configure"
-#include "confdefs.h"
-/* Override any gcc2 internal prototype to avoid an error. */
-/* We use char because int might match the return type of a gcc2
- builtin and then its argument prototype would still apply. */
-char XShapeSelectInput();
-
-int main() {
-XShapeSelectInput()
-; return 0; }
-EOF
-if { (eval echo configure:6616: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
- rm -rf conftest*
- eval "ac_cv_lib_$ac_lib_var=yes"
-else
- echo "configure: failed program was:" >&5
- cat conftest.$ac_ext >&5
- rm -rf conftest*
- eval "ac_cv_lib_$ac_lib_var=no"
-fi
-rm -f conftest*
-xe_check_libs=""
-
-if eval "test \"`echo '$ac_cv_lib_'$ac_lib_var`\" = yes" ; then
- echo "$ac_t""yes" 1>&6
- libs_x="-lXext $libs_x" && if test "$extra_verbose" = "yes"; then echo " Prepending \"-lXext\" to \$libs_x"; fi
-else
- echo "$ac_t""no" 1>&6
-fi
-
-
-
-
-echo $ac_n "checking for XtOpenDisplay in -lXt""... $ac_c" 1>&6
-echo "configure:6639: checking for XtOpenDisplay in -lXt" >&5
-ac_lib_var=`echo Xt'_'XtOpenDisplay | sed 'y%./+-%__p_%'`
-
-xe_check_libs=" -lXt "
-cat > conftest.$ac_ext <<EOF
-#line 6644 "configure"
-#include "confdefs.h"
-/* Override any gcc2 internal prototype to avoid an error. */
-/* We use char because int might match the return type of a gcc2
- builtin and then its argument prototype would still apply. */
-char XtOpenDisplay();
-
-int main() {
-XtOpenDisplay()
-; return 0; }
-EOF
-if { (eval echo configure:6655: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
- rm -rf conftest*
- eval "ac_cv_lib_$ac_lib_var=yes"
-else
- echo "configure: failed program was:" >&5
- cat conftest.$ac_ext >&5
- rm -rf conftest*
- eval "ac_cv_lib_$ac_lib_var=no"
-fi
-rm -f conftest*
-xe_check_libs=""
-
-if eval "test \"`echo '$ac_cv_lib_'$ac_lib_var`\" = yes" ; then
- echo "$ac_t""yes" 1>&6
- libs_x="-lXt $libs_x" && if test "$extra_verbose" = "yes"; then echo " Prepending \"-lXt\" to \$libs_x"; fi
-else
- echo "$ac_t""no" 1>&6
-{ echo "configure: error: "Unable to find X11 libraries."" 1>&2; exit 1; }
-fi
-
-
-
- echo $ac_n "checking the version of X11 being used""... $ac_c" 1>&6
-echo "configure:6678: checking the version of X11 being used" >&5
- cat > conftest.$ac_ext <<EOF
-#line 6680 "configure"
-#include "confdefs.h"
-#include <X11/Intrinsic.h>
- int main(int c, char *v[]) { return c>1 ? XlibSpecificationRelease : 0; }
-EOF
-if { (eval echo configure:6685: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest && (./conftest; exit $?) 2>&5
-then
- ./conftest foobar; x11_release=$?
-else
- conftest_rc="$?"
- echo "configure: failed program was:" >&5
- cat conftest.$ac_ext >&5
- rm -fr conftest*
- x11_release=4
-fi
-rm -fr conftest*
- echo "$ac_t""R${x11_release}" 1>&6
- { test "$extra_verbose" = "yes" && cat << EOF
- Defining THIS_IS_X11R${x11_release}
-EOF
-cat >> confdefs.h <<EOF
-#define THIS_IS_X11R${x11_release} 1
-EOF
-}
-
-
- if test "${x11_release}" = "4"; then
- case "$with_widgets" in
- "" | "no") with_widgets=no ;;
- *) { echo "Error:" "Widget support requires X11R5 or greater" >&2; exit 1; } ;;
- esac
- fi
-
- for ac_func in XConvertCase
-do
-echo $ac_n "checking for $ac_func""... $ac_c" 1>&6
-echo "configure:6716: checking for $ac_func" >&5
-
-cat > conftest.$ac_ext <<EOF
-#line 6719 "configure"
-#include "confdefs.h"
-/* System header to define __stub macros and hopefully few prototypes,
- which can conflict with char $ac_func(); below. */
-#include <assert.h>
-/* Override any gcc2 internal prototype to avoid an error. */
-/* We use char because int might match the return type of a gcc2
- builtin and then its argument prototype would still apply. */
-char $ac_func();
-
-int main() {
-
-/* The GNU C library defines this for functions which it implements
- to always fail with ENOSYS. Some functions are actually named
- something starting with __ and the normal name is an alias. */
-#if defined (__stub_$ac_func) || defined (__stub___$ac_func)
-choke me
-#else
-$ac_func();
-#endif