Update recommended APEL, FLIM, and SEMI version.

[elisp/wanderlust.git] / doc / wl.texi

diff --git a/doc/wl.texi b/doc/wl.texi
index aac5096..2363633 100644 (file)
--- a/doc/wl.texi
+++ b/doc/wl.texi
@@ -145,7 +145,7 @@ The main features of Wanderlust:
 @item Manages unread messages.
 @item Interactive thread display.
 @item Folder Mode shows the list of subscribed folders.
 @item Manages unread messages.
 @item Interactive thread display.
 @item Folder Mode shows the list of subscribed folders.

-@item Message Cache, Disconnected Operation (Read Only).
+@item Message Cache, Disconnected Operation.

 @item MH-like FCC. (Fcc: %Backup and Fcc: $Backup is allowed).
 @item MIME compliant (by SEMI).
 @item Transmission of news and mail are unified by Message transmitting draft.
 @item MH-like FCC. (Fcc: %Backup and Fcc: $Backup is allowed).
 @item MIME compliant (by SEMI).
 @item Transmission of news and mail are unified by Message transmitting draft.

@@ -254,7 +254,7 @@ may help you.}.
 Recommended combination of APEL, FLIM and SEMI are following:
 
 @itemize @minus
 Recommended combination of APEL, FLIM and SEMI are following:
 
 @itemize @minus

-@item APEL 10.5, FLIM 1.14.5 and SEMI 1.14.5
+@item APEL 10.6, FLIM 1.14.6 and SEMI 1.14.6

 @end itemize
 
 You can also use many other FLIM/SEMI variants. Combination of the
 @end itemize
 
 You can also use many other FLIM/SEMI variants. Combination of the

@@ -262,8 +262,8 @@ latest versions should work.  For example, the following combination are
 confirmed to work.
 
 @itemize @minus
 confirmed to work.
 
 @itemize @minus

-@item APEL 10.5, SLIM 1.14.9, SEMI 1.14.5
-@item APEL 10.5, CLIME 1.14.5, EMIKO 1.14.1
+@item APEL 10.6, SLIM 1.14.9, SEMI 1.14.5
+@item APEL 10.6, CLIME 1.14.5, EMIKO 1.14.1

 @end itemize
 
 You have to re-install Wanderlust if you upgraded APEL, FLIM or SEMI.
 @end itemize
 
 You have to re-install Wanderlust if you upgraded APEL, FLIM or SEMI.

@@ -670,9 +670,9 @@ This chapter describes the folder types which Wanderlust is able to handle.
 Wanderlust uses ELMO as it's interface, so you can use every folder types
 supported by ELMO.
 
 Wanderlust uses ELMO as it's interface, so you can use every folder types
 supported by ELMO.
 

-As of version @value{VERSION}, 11 types of folders are predefined. These are
-IMAP, NNTP, LocalDir(MH), Maildir, News Spool, Archive, POP, Multi, Filter,
-Pipe and Internal folder types.
+As of version @value{VERSION}, 13 types of folders are predefined. These
+are IMAP, NNTP, LocalDir(MH), Maildir, News Spool, Archive, POP,
+Shimbun, Namazu, Multi, Filter, Pipe and Internal folder types.

 
 @menu
 * IMAP Folder::                 @samp{%} -- IMAP folder
 
 @menu
 * IMAP Folder::                 @samp{%} -- IMAP folder

@@ -1651,25 +1651,22 @@ Format:
 
 @example
 @group
 
 @example
 @group

-'mark
-'sendlog
-'cache/00 - 1F
+@samp{'flag} [@samp{/} @var{global-flag}]
+@samp{'sendlog}
+@samp{'cache/00} - @samp{'cache/1F}

 @end group
 @end example
 
 @end group
 @end example
 

-A folder named @samp{'mark} is a special virtual folder which collects
-messages which have important mark @samp{$}.
+A folder named @samp{'flag} is a special virtual folder which collects
+messages which have @var{global-flag}.

 
 

-You can review important messages at once after you put important marks
-on the messages in the different folders.
+Now, @samp{important} flag is supported as @var{global-flag}.  You can
+review important messages at once after you put important marks on the
+messages in the different folders.

 
 

-In this folder, if you delete message, important mark @samp{$} put on
-the message is removed.  If you append messages to this folder, the
-message will have @samp{$} mark.
-
-(Can't remove important mark @samp{$} on IMAP server from @samp{'mark}
-folder.  If you want IMAP folder's message remove from @samp{'mark}
-folder, remove important mark at IMAP Folder.)
+In this folder, if you delete message, @var{global-flag} put on the
+message is removed.  If you append messages to this folder, the message
+will have @var{global-flag}.

 
 
 A folder named @samp{'sendlog} is a virtual folder which collects
 
 
 A folder named @samp{'sendlog} is a virtual folder which collects

@@ -2542,7 +2539,7 @@ message has empty subject field.
 @cindex Mark, Temporary
 
 There are four temporary marks,
 @cindex Mark, Temporary
 
 There are four temporary marks,

-@samp{*}, @samp{d}, @samp{o} and @samp{O}.
+@samp{*}, @samp{d}, @samp{D}, @samp{o}, @samp{O}, @samp{i} and @samp{~}.

 Temporary marks indicates message operations.
 
 @table @samp
 Temporary marks indicates message operations.
 
 @table @samp

@@ -2554,6 +2551,9 @@ with the key bindings which begins with @kbd{m}.
 @item d
 The mark to dispose. You can put @samp{d} by typing @kbd{d} key.
 
 @item d
 The mark to dispose. You can put @samp{d} by typing @kbd{d} key.
 

+@item D
+The mark to force delete. You can put @samp{D} by typing @kbd{D} key.
+

 @item o
 The mark to refile.
 After you type @kbd{o} key, prompt appears to input refile destination.
 @item o
 The mark to refile.
 After you type @kbd{o} key, prompt appears to input refile destination.

@@ -2564,14 +2564,23 @@ The mark to refile.
 You can put this mark by typing @kbd{O} key.
 The difference between this mark and refile mark is,
 this mark does not delete the message while latter does.
 You can put this mark by typing @kbd{O} key.
 The difference between this mark and refile mark is,
 this mark does not delete the message while latter does.

+
+@item i
+The mark to prefetch reserved.
+You can put this mark by typing @kbd{i} key.
+
+@item ~
+The mark to resend reserved.
+After you type @kbd{~} key, prompt appears to input address to resend.
+Your answer is printed in the summary line.

 @end table
 
 @kbd{x} key executes action for temporary marks, respectively.
 
 @subsection Persistent Marks
 
 @end table
 
 @kbd{x} key executes action for temporary marks, respectively.
 
 @subsection Persistent Marks
 

-There are five persistent marks,
-@samp{N}, @samp{U}, @samp{!}, @samp{u} and @samp{$}.
+There are five persistent marks, @samp{N}, @samp{?}, @samp{U}, @samp{!},
+@samp{u}, @samp{A}, @samp{&} and @samp{$}.

 
 The persistent mark indicates the message's status and it is saved.
 Each persistent mark indicates:
 
 The persistent mark indicates the message's status and it is saved.
 Each persistent mark indicates:

@@ -2579,12 +2588,18 @@ Each persistent mark indicates:
 @table @samp
 @item N
 It is new message.
 @table @samp
 @item N
 It is new message.

+@item ?
+It is new but cached message.

 @item U
 It is unread message.
 @item !
 It is unread but cached message.
 @item u
 It is read but it is not cached.
 @item U
 It is unread message.
 @item !
 It is unread but cached message.
 @item u
 It is read but it is not cached.

+@item A
+It is already replied message.
+@item &
+It is already replied but cached message.

 @item $
 It is important message.  You can put @samp{$} mark by typing @kbd{$}
 key (if already exists, the mark is deleted).  It is convenient to put
 @item $
 It is important message.  You can put @samp{$} mark by typing @kbd{$}
 key (if already exists, the mark is deleted).  It is convenient to put

@@ -2598,9 +2613,10 @@ If the message is read and cached (or local message),there are no
 persistent mark.
 @end table
 
 persistent mark.
 @end table
 

-@samp{N}, @samp{U} and @samp{u} indicates that the message have no
-cache.  Messages with the marks other than these, you can read them in
-the offline status even they are in the IMAP folder or netnews folder.
+@samp{N}, @samp{U}, @samp{u}, @samp{A} indicates that the message have
+no cache.  Messages with the marks other than these, you can read them
+in the offline status even they are in the IMAP folder or netnews
+folder.

 
 Among messages with persistent marks, ones with marks specified by 
 @code{wl-summary-expire-reserve-marks} are excluded from the expiration
 
 Among messages with persistent marks, ones with marks specified by 
 @code{wl-summary-expire-reserve-marks} are excluded from the expiration

@@ -3887,6 +3903,12 @@ want to aware of reading direction, set this to @code{t}.
 The initial setting is 80.
 Width of summary line. If @code{nil}, summary line's width is as is.
 
 The initial setting is 80.
 Width of summary line. If @code{nil}, summary line's width is as is.
 

+@item wl-summary-print-argument-within-window
+@vindex wl-summary-print-argument-within-window
+The initial setting is @code{nil}.
+If non-nil, the action argument is always printed on right side of
+window.
+

 @item wl-summary-from-width
 @vindex wl-summary-from-width
 The initial setting is 17.
 @item wl-summary-from-width
 @vindex wl-summary-from-width
 The initial setting is 17.

@@ -3967,7 +3989,7 @@ The initial setting is the list shown below:
 
 @lisp
 @group
 
 @lisp
 @group

-("o" "O" "D")
+("o" "O" "D" "d" "i")

 @end group
 @end lisp
 
 @end group
 @end lisp
 

@@ -3981,7 +4003,7 @@ The initial setting is the list shown below:
 
 @lisp
 @group
 
 @lisp
 @group

-("D")
+("D" "d")

 @end group
 @end lisp
 
 @end group
 @end lisp
 

@@ -4297,7 +4319,7 @@ The format of @code{wl-draft-config-alist} is:
 @end group
 @end example
 
 @end group
 @end example
 

-Per default, there are 10 following sub-functions.
+Per default, there are 13 following sub-functions.

 
 @example
 'header:      Inserts the specified string at the bottom of the header.
 
 @example
 'header:      Inserts the specified string at the bottom of the header.

@@ -5638,7 +5660,8 @@ The initial setting is the list below.
 @lisp
 @group
 (list wl-summary-important-mark
 @lisp
 @group
 (list wl-summary-important-mark

-      wl-summary-new-mark
+      wl-summary-new-uncached-mark
+      wl-summary-new-cached-mark

       wl-summary-unread-mark
       wl-summary-unread-uncached-mark
       wl-summary-unread-cached-mark)
       wl-summary-unread-mark
       wl-summary-unread-uncached-mark
       wl-summary-unread-cached-mark)

@@ -6160,7 +6183,8 @@ The initial setting is the list shown below:
 
 @lisp
 @group
 
 @lisp
 @group

-(list wl-summary-new-mark)
+(list wl-summary-new-uncached-mark
+      wl-summary-new-cached-mark)

 @end group
 @end lisp
 
 @end group
 @end lisp