(MH-1): Use `morohashi-daikanwa' property instead of

[chise/xemacs-chise.git] / info / xemacs.info-11

diff --git a/info/xemacs.info-11 b/info/xemacs.info-11
index f4416a5..b8daf71 100644 (file)
--- a/info/xemacs.info-11
+++ b/info/xemacs.info-11
@@ -30,6 +30,91 @@ versions, except that the sections entitled "The GNU Manifesto",
 translation approved by the author instead of in the original English.
 
 \1f
 translation approved by the author instead of in the original English.
 
 \1f

+File: xemacs.info,  Node: Basic Indent,  Next: Multi-line Indent,  Prev: Grinding,  Up: Grinding
+
+Basic Program Indentation Commands
+----------------------------------
+
+`<TAB>'
+     Adjust indentation of current line.
+
+`<LFD>'
+     Equivalent to <RET> followed by <TAB> (`newline-and-indent').
+
+   The basic indentation command is <TAB>, which gives the current line
+the correct indentation as determined from the previous lines.  The
+function that <TAB> runs depends on the major mode; it is
+`lisp-indent-line' in Lisp mode, `c-indent-line' in C mode, etc.  These
+functions understand different syntaxes for different languages, but
+they all do about the same thing.  <TAB> in any programming language
+major mode inserts or deletes whitespace at the beginning of the
+current line, independent of where point is in the line.  If point is
+inside the whitespace at the beginning of the line, <TAB> leaves it at
+the end of that whitespace; otherwise, <TAB> leaves point fixed with
+respect to the characters around it.
+
+   Use `C-q <TAB>' to insert a tab at point.
+
+   When entering a large amount of new code, use <LFD>
+(`newline-and-indent'), which is equivalent to a <RET> followed by a
+<TAB>.  <LFD> creates a blank line, then gives it the appropriate
+indentation.
+
+   <TAB> indents the second and following lines of the body of a
+parenthetical grouping each under the preceding one; therefore, if you
+alter one line's indentation to be nonstandard, the lines below tend to
+follow it.  This is the right behavior in cases where the standard
+result of <TAB> does not look good.
+
+   Remember that Emacs assumes that an open-parenthesis, open-brace, or
+other opening delimiter at the left margin (including the indentation
+routines) is the start of a function.  You should therefore never have
+an opening delimiter in column zero that is not the beginning of a
+function, not even inside a string.  This restriction is vital for
+making the indentation commands fast. *Note Defuns::, for more
+information on this behavior.
+
+\1f
+File: xemacs.info,  Node: Multi-line Indent,  Next: Lisp Indent,  Prev: Basic Indent,  Up: Grinding
+
+Indenting Several Lines
+-----------------------
+
+   Several commands are available to re-indent several lines of code
+which have been altered or moved to a different level in a list
+structure.
+
+`C-M-q'
+     Re-indent all the lines within one list (`indent-sexp').
+
+`C-u <TAB>'
+     Shift an entire list rigidly sideways so that its first line is
+     properly indented.
+
+`C-M-\'
+     Re-indent all lines in the region (`indent-region').
+
+   To re-indent the contents of a single list, position point before the
+beginning of it and type `C-M-q'. This key is bound to `indent-sexp' in
+Lisp mode, `indent-c-exp' in C mode, and bound to other suitable
+functions in other modes.  The indentation of the line the sexp starts
+on is not changed; therefore, only the relative indentation within the
+list, and not its position, is changed.  To correct the position as
+well, type a <TAB> before `C-M-q'.
+
+   If the relative indentation within a list is correct but the
+indentation of its beginning is not, go to the line on which the list
+begins and type `C-u <TAB>'.  When you give <TAB> a numeric argument,
+it moves all the lines in the group, starting on the current line,
+sideways the same amount that the current line moves.  The command does
+not move lines that start inside strings, or C preprocessor lines when
+in C mode.
+
+   Another way to specify a range to be re-indented is with point and
+mark.  The command `C-M-\' (`indent-region') applies <TAB> to every
+line whose first character is between point and mark.
+
+\1f

 File: xemacs.info,  Node: Lisp Indent,  Next: C Indent,  Prev: Multi-line Indent,  Up: Grinding
 
 Customizing Lisp Indentation
 File: xemacs.info,  Node: Lisp Indent,  Next: C Indent,  Prev: Multi-line Indent,  Up: Grinding
 
 Customizing Lisp Indentation

@@ -1032,165 +1117,3 @@ the C sources of Emacs.  By specifying this file with `visit-tags-table'
 and then using `M-.' you can quickly look at the source of any Emacs
 function.
 
 and then using `M-.' you can quickly look at the source of any Emacs
 function.
 

-\1f
-File: xemacs.info,  Node: Tags Search,  Next: List Tags,  Prev: Find Tag,  Up: Tags
-
-Searching and Replacing with Tags Tables
-----------------------------------------
-
-   The commands in this section visit and search all the files listed
-in the selected tags table, one by one.  For these commands, the tags
-table serves only to specify a sequence of files to search.  A related
-command is `M-x grep' (*note Compilation::).
-
-`M-x tags-search <RET> REGEXP <RET>'
-     Search for REGEXP through the files in the selected tags table.
-
-`M-x tags-query-replace <RET> REGEXP <RET> REPLACEMENT <RET>'
-     Perform a `query-replace-regexp' on each file in the selected tags
-     table.
-
-`M-,'
-     Restart one of the commands above, from the current location of
-     point (`tags-loop-continue').
-
-   `M-x tags-search' reads a regexp using the minibuffer, then searches
-for matches in all the files in the selected tags table, one file at a
-time.  It displays the name of the file being searched so you can
-follow its progress.  As soon as it finds an occurrence, `tags-search'
-returns.
-
-   Having found one match, you probably want to find all the rest.  To
-find one more match, type `M-,' (`tags-loop-continue') to resume the
-`tags-search'.  This searches the rest of the current buffer, followed
-by the remaining files of the tags table.
-
-   `M-x tags-query-replace' performs a single `query-replace-regexp'
-through all the files in the tags table.  It reads a regexp to search
-for and a string to replace with, just like ordinary `M-x
-query-replace-regexp'.  It searches much like `M-x tags-search', but
-repeatedly, processing matches according to your input.  *Note
-Replace::, for more information on query replace.
-
-   It is possible to get through all the files in the tags table with a
-single invocation of `M-x tags-query-replace'.  But often it is useful
-to exit temporarily, which you can do with any input event that has no
-special query replace meaning.  You can resume the query replace
-subsequently by typing `M-,'; this command resumes the last tags search
-or replace command that you did.
-
-   The commands in this section carry out much broader searches than the
-`find-tag' family.  The `find-tag' commands search only for definitions
-of tags that match your substring or regexp.  The commands
-`tags-search' and `tags-query-replace' find every occurrence of the
-regexp, as ordinary search commands and replace commands do in the
-current buffer.
-
-   These commands create buffers only temporarily for the files that
-they have to search (those which are not already visited in Emacs
-buffers).  Buffers in which no match is found are quickly killed; the
-others continue to exist.
-
-   It may have struck you that `tags-search' is a lot like `grep'.  You
-can also run `grep' itself as an inferior of Emacs and have Emacs show
-you the matching lines one by one.  This works much like running a
-compilation; finding the source locations of the `grep' matches works
-like finding the compilation errors.  *Note Compilation::.
-
-   If you wish to process all the files in a selected tags table, but
-`M-x tags-search' and `M-x tags-query-replace' are not giving you the
-desired result, you can use `M-x next-file'.
-
-`C-u M-x next-file'
-     With a numeric argument, regardless of its value, visit the first
-     file in the tags table and prepare to advance sequentially by
-     files.
-
-`M-x next-file'
-     Visit the next file in the selected tags table.
-
-\1f
-File: xemacs.info,  Node: List Tags,  Prev: Tags Search,  Up: Tags
-
-Tags Table Inquiries
---------------------
-
-`M-x list-tags'
-     Display a list of the tags defined in a specific program file.
-
-`M-x tags-apropos'
-     Display a list of all tags matching a specified regexp.
-
-   `M-x list-tags' reads the name of one of the files described by the
-selected tags table, and displays a list of all the tags defined in that
-file.  The "file name" argument is really just a string to compare
-against the names recorded in the tags table; it is read as a string
-rather than a file name.  Therefore, completion and defaulting are not
-available, and you must enter the string the same way it appears in the
-tag table.  Do not include a directory as part of the file name unless
-the file name recorded in the tags table contains that directory.
-
-   `M-x tags-apropos' is like `apropos' for tags.  It reads a regexp,
-then finds all the tags in the selected tags table whose entries match
-that regexp, and displays the tag names found.
-
-\1f
-File: xemacs.info,  Node: Fortran,  Next: Asm Mode,  Prev: Tags,  Up: Programs
-
-Fortran Mode
-============
-
-   Fortran mode provides special motion commands for Fortran statements
-and subprograms, and indentation commands that understand Fortran
-conventions of nesting, line numbers, and continuation statements.
-
-   Special commands for comments are provided because Fortran comments
-are unlike those of other languages.
-
-   Built-in abbrevs optionally save typing when you insert Fortran
-keywords.
-
-   Use `M-x fortran-mode' to switch to this major mode.  Doing so calls
-the value of `fortran-mode-hook' as a function of no arguments if that
-variable has a non-`nil' value.
-
-* Menu:
-
-* Motion: Fortran Motion.     Moving point by statements or subprograms.
-* Indent: Fortran Indent.     Indentation commands for Fortran.
-* Comments: Fortran Comments. Inserting and aligning comments.
-* Columns: Fortran Columns.   Measuring columns for valid Fortran.
-* Abbrev: Fortran Abbrev.     Built-in abbrevs for Fortran keywords.
-
-   Fortran mode was contributed by Michael Prange.
-
-\1f
-File: xemacs.info,  Node: Fortran Motion,  Next: Fortran Indent,  Prev: Fortran,  Up: Fortran
-
-Motion Commands
----------------
-
-   Fortran mode provides special commands to move by subprograms
-(functions and subroutines) and by statements.  There is also a command
-to put the region around one subprogram, which is convenient for
-killing it or moving it.
-
-`C-M-a'
-     Move to beginning of subprogram
-     (`beginning-of-fortran-subprogram').
-
-`C-M-e'
-     Move to end of subprogram (`end-of-fortran-subprogram').
-
-`C-M-h'
-     Put point at beginning of subprogram and mark at end
-     (`mark-fortran-subprogram').
-
-`C-c C-n'
-     Move to beginning of current or next statement (`fortran-next-
-     statement').
-
-`C-c C-p'
-     Move to beginning of current or previous statement (`fortran-
-     previous-statement').
-