update.

[chise/xemacs-chise.git] / info / xemacs.info-13

diff --git a/info/xemacs.info-13 b/info/xemacs.info-13
index d59e716..7e434aa 100644 (file)
--- a/info/xemacs.info-13
+++ b/info/xemacs.info-13
@@ -1,5 +1,5 @@
-This is Info file ../../info/xemacs.info, produced by Makeinfo version
-1.68 from the input file xemacs.texi.
+This is ../info/xemacs.info, produced by makeinfo version 4.0b from
+xemacs/xemacs.texi.

 
 INFO-DIR-SECTION XEmacs Editor
 START-INFO-DIR-ENTRY
 
 INFO-DIR-SECTION XEmacs Editor
 START-INFO-DIR-ENTRY

@@ -30,1177 +30,1095 @@ versions, except that the sections entitled "The GNU Manifesto",
 translation approved by the author instead of in the original English.
 
 \1f
 translation approved by the author instead of in the original English.
 
 \1f

-File: xemacs.info,  Node: Basic Picture,  Next: Insert in Picture,  Prev: Picture,  Up: Picture
+File: xemacs.info,  Node: Lisp Libraries,  Next: Lisp Eval,  Prev: Lisp Modes,  Up: Running

 
 

-Basic Editing in Picture Mode
-=============================
+Libraries of Lisp Code for Emacs
+================================

 
 

-   Most keys do the same thing in Picture mode that they usually do,
-but do it in a quarter-plane style.  For example, `C-f' is rebound to
-run `picture-forward-column', which moves point one column to the
-right, by inserting a space if necessary, so that the actual end of the
-line makes no difference.  `C-b' is rebound to run
-`picture-backward-column', which always moves point left one column,
-converting a tab to multiple spaces if necessary.  `C-n' and `C-p' are
-rebound to run `picture-move-down' and `picture-move-up', which can
-either insert spaces or convert tabs as necessary to make sure that
-point stays in exactly the same column.  `C-e' runs
-`picture-end-of-line', which moves to after the last non-blank
-character on the line.  There was no need to change `C-a', as the choice
-of screen model does not affect beginnings of lines.
-
-   Insertion of text is adapted to the quarter-plane screen model
-through the use of Overwrite mode (*note Minor Modes::.).
-Self-inserting characters replace existing text, column by column,
-rather than pushing existing text to the right.  <RET> runs
-`picture-newline', which just moves to the beginning of the following
-line so that new text will replace that line.
-
-   Text is erased instead of deleted and killed.  <DEL>
-(`picture-backward-clear-column') replaces the preceding character with
-a space rather than removing it.  `C-d' (`picture-clear-column') does
-the same in a forward direction.  `C-k' (`picture-clear-line') really
-kills the contents of lines, but never removes the newlines from a
-buffer.
-
-   To do actual insertion, you must use special commands.  `C-o'
-(`picture-open-line') creates a blank line, but does so after the
-current line; it never splits a line.  `C-M-o', `split-line', makes
-sense in Picture mode, so it remains unchanged.  <LFD>
-(`picture-duplicate-line') inserts another line with the same contents
-below the current line.
-
-   To actually delete parts of the picture, use `C-w', or with `C-c
-C-d' (which is defined as `delete-char', as `C-d' is in other modes),
-or with one of the picture rectangle commands (*note Rectangles in
-Picture::.).
+   Lisp code for Emacs editing commands is stored in files whose names
+conventionally end in `.el'.  This ending tells Emacs to edit them in
+Emacs-Lisp mode (*note Lisp Modes::).

 
 

-\1f
-File: xemacs.info,  Node: Insert in Picture,  Next: Tabs in Picture,  Prev: Basic Picture,  Up: Picture
+* Menu:

 
 

-Controlling Motion After Insert
-===============================
+* Loading::            Loading libraries of Lisp code into Emacs for use.
+* Compiling Libraries:: Compiling a library makes it load and run faster.
+* Mocklisp::           Converting Mocklisp to Lisp so XEmacs can run it.

 
 

-   Since "self-inserting" characters just overwrite and move point in
-Picture mode, there is no essential restriction on how point should be
-moved.  Normally point moves right, but you can specify any of the eight
-orthogonal or diagonal directions for motion after a "self-inserting"
-character.  This is useful for drawing lines in the buffer.
+\1f
+File: xemacs.info,  Node: Loading,  Next: Compiling Libraries,  Prev: Lisp Libraries,  Up: Lisp Libraries
+
+Loading Libraries
+-----------------
+
+`M-x load-file FILE'
+     Load the file FILE of Lisp code.
+
+`M-x load-library LIBRARY'
+     Load the library named LIBRARY.
+
+`M-x locate-library LIBRARY &optional NOSUFFIX'
+     Show the full path name of Emacs library LIBRARY.
+
+   To execute a file of Emacs Lisp, use `M-x load-file'.  This command
+reads the file name you provide in the minibuffer, then executes the
+contents of that file as Lisp code.  It is not necessary to visit the
+file first; in fact, this command reads the file as found on disk, not
+the text in an Emacs buffer.
+
+   Once a file of Lisp code is installed in the Emacs Lisp library
+directories, users can load it using `M-x load-library'.  Programs can
+load it by calling `load-library', or with `load', a more primitive
+function that is similar but accepts some additional arguments.
+
+   `M-x load-library' differs from `M-x load-file' in that it searches
+a sequence of directories and tries three file names in each directory.
+The three names are: first, the specified name with `.elc' appended;
+second, the name with `.el' appended; third, the specified name alone.
+A `.elc' file would be the result of compiling the Lisp file into byte
+code;  if possible, it is loaded in preference to the Lisp file itself
+because the compiled file loads and runs faster.
+
+   Because the argument to `load-library' is usually not in itself a
+valid file name, file name completion is not available.  In fact, when
+using this command, you usually do not know exactly what file name will
+be used.
+
+   The sequence of directories searched by `M-x load-library' is
+specified by the variable `load-path', a list of strings that are
+directory names.  The elements of this list may not begin with "`~'",
+so you must call `expand-file-name' on them before adding them to the
+list.  The default value of the list contains the directory where the
+Lisp code for Emacs itself is stored.  If you have libraries of your
+own, put them in a single directory and add that directory to
+`load-path'.  `nil' in this list stands for the current default
+directory, but it is probably not a good idea to put `nil' in the list.
+If you start wishing that `nil' were in the list, you should probably
+use `M-x load-file' for this case.
+
+   The variable is initialized by the EMACSLOADPATH environment
+variable. If no value is specified, the variable takes the default value
+specified in the file `paths.h' when Emacs was built. If a path isn't
+specified in `paths.h', a default value is obtained from the file
+system, near the directory in which the Emacs executable resides.
+
+   Like `M-x load-library', `M-x locate-library' searches the
+directories in `load-path' to find the file that `M-x load-library'
+would load.  If the optional second argument NOSUFFIX is non-`nil', the
+suffixes `.elc' or `.el' are not added to the specified name LIBRARY
+(like calling `load' instead of `load-library').
+
+   You often do not have to give any command to load a library, because
+the commands defined in the library are set up to "autoload" that
+library.  Running any of those commands causes `load' to be called to
+load the library; this replaces the autoload definitions with the real
+ones from the library.
+
+   If autoloading a file does not finish, either because of an error or
+because of a `C-g' quit, all function definitions made by the file are
+undone automatically.  So are any calls to `provide'.  As a
+consequence, the entire file is loaded a second time if you use one of
+the autoloadable commands again.  This prevents problems when the
+command is no longer autoloading but is working incorrectly because the
+file was only partially loaded.  Function definitions are undone only
+for autoloading; explicit calls to `load' do not undo anything if
+loading is not completed.
+
+   The variable `after-load-alist' takes an alist of expressions to be
+evaluated when particular files are loaded.  Each element has the form
+`(FILENAME forms...)'.  When `load' is run and the filename argument is
+FILENAME, the forms in the corresponding element are executed at the
+end of loading.
+
+   FILENAME must match exactly.  Normally FILENAME is the name of a
+library, with no directory specified, since that is how load is
+normally called.  An error in `forms' does not undo the load, but it
+does prevent execution of the rest of the `forms'.

 
 

-`C-c <'
-     Move left after insertion (`picture-movement-left').
+\1f
+File: xemacs.info,  Node: Compiling Libraries,  Next: Mocklisp,  Prev: Loading,  Up: Lisp Libraries
+
+Compiling Libraries
+-------------------
+
+   Emacs Lisp code can be compiled into byte-code which loads faster,
+takes up less space when loaded, and executes faster.
+
+`M-x batch-byte-compile'
+     Run byte-compile-file on the files remaining on the command line.
+
+`M-x byte-compile-buffer &optional BUFFER'
+     Byte-compile and evaluate contents of BUFFER (default is current
+     buffer).
+
+`M-x byte-compile-file'
+     Compile a file of Lisp code named FILENAME into a file of byte
+     code.
+
+`M-x byte-compile-and-load-file FILENAME'
+     Compile a file of Lisp code named FILENAME into a file of byte
+     code and load it.
+
+`M-x byte-recompile-directory DIRECTORY'
+     Recompile every `.el' file in DIRECTORY that needs recompilation.
+
+`M-x disassemble'
+     Print disassembled code for OBJECT on (optional) STREAM.
+
+`M-x make-obsolete FUNCTION NEW'
+     Make the byte-compiler warn that FUNCTION is obsolete and NEW
+     should be used instead.
+
+   `byte-compile-file' creates a byte-code compiled file from an
+Emacs-Lisp source file.  The default argument for this function is the
+file visited in the current buffer.  The function reads the specified
+file, compiles it into byte code, and writes an output file whose name
+is made by appending `c' to the input file name.  Thus, the file
+`rmail.el' would be compiled into `rmail.elc'. To compile a file of
+Lisp code named FILENAME into a file of byte code and then load it, use
+`byte-compile-and-load-file'. To compile and evaluate Lisp code in a
+given buffer, use `byte-compile-buffer'.
+
+   To recompile all changed Lisp files in a directory, use `M-x
+byte-recompile-directory'.  Specify just the directory name as an
+argument.  Each `.el' file that has been byte-compiled before is
+byte-compiled again if it has changed since the previous compilation.
+A numeric argument to this command tells it to offer to compile each
+`.el' file that has not been compiled yet.  You must answer `y' or `n'
+to each offer.
+
+   You can use the function `batch-byte-compile' to invoke Emacs
+non-interactively from the shell to do byte compilation.  When you use
+this function, the files to be compiled are specified with command-line
+arguments.  Use a shell command of the form:
+
+     emacs -batch -f batch-byte-compile FILES...
+
+   Directory names may also be given as arguments; in that case,
+`byte-recompile-directory' is invoked on each such directory.
+`batch-byte-compile' uses all remaining command-line arguments as file
+or directory names, then kills the Emacs process.
+
+   `M-x disassemble' explains the result of byte compilation.  Its
+argument is a function name.  It displays the byte-compiled code in a
+help window in symbolic form, one instruction per line.  If the
+instruction refers to a variable or constant, that is shown, too.

 
 

-`C-c >'
-     Move right after insertion (`picture-movement-right').
+\1f
+File: xemacs.info,  Node: Mocklisp,  Prev: Compiling Libraries,  Up: Lisp Libraries

 
 

-`C-c ^'
-     Move up after insertion (`picture-movement-up').
+Converting Mocklisp to Lisp
+---------------------------

 
 

-`C-c .'
-     Move down after insertion (`picture-movement-down').
+   XEmacs can run Mocklisp files by converting them to Emacs Lisp first.
+To convert a Mocklisp file, visit it and then type `M-x
+convert-mocklisp-buffer'.  Then save the resulting buffer of Lisp file
+in a file whose name ends in `.el' and use the new file as a Lisp
+library.

 
 

-`C-c `'
-     Move up and left ("northwest") after insertion
-     (`picture-movement-nw').
+   You cannot currently byte-compile converted Mocklisp code.  The
+reason is that converted Mocklisp code uses some special Lisp features
+to deal with Mocklisp's incompatible ideas of how arguments are
+evaluated and which values signify "true" or "false".

 
 

-`C-c ''
-     Move up and right ("northeast") after insertion
-     (`picture-movement-ne').
+\1f
+File: xemacs.info,  Node: Lisp Eval,  Next: Lisp Debug,  Prev: Lisp Libraries,  Up: Running
+
+Evaluating Emacs-Lisp Expressions
+=================================
+
+   Lisp programs intended to be run in Emacs should be edited in
+Emacs-Lisp mode; this will happen automatically for file names ending in
+`.el'.  By contrast, Lisp mode itself should be used for editing Lisp
+programs intended for other Lisp systems.  Emacs-Lisp mode can be
+selected with the command `M-x emacs-lisp-mode'.
+
+   For testing of Lisp programs to run in Emacs, it is useful to be able
+to evaluate part of the program as it is found in the Emacs buffer.  For
+example, if you change the text of a Lisp function definition and then
+evaluate the definition, Emacs installs the change for future calls to
+the function.  Evaluation of Lisp expressions is also useful in any
+kind of editing task for invoking non-interactive functions (functions
+that are not commands).
+
+`M-<ESC>'
+     Read a Lisp expression in the minibuffer, evaluate it, and print
+     the value in the minibuffer (`eval-expression').
+
+`C-x C-e'
+     Evaluate the Lisp expression before point, and print the value in
+     the minibuffer (`eval-last-sexp').
+
+`C-M-x'
+     Evaluate the defun containing point or after point, and print the
+     value in the minibuffer (`eval-defun').
+
+`M-x eval-region'
+     Evaluate all the Lisp expressions in the region.
+
+`M-x eval-current-buffer'
+     Evaluate all the Lisp expressions in the buffer.
+
+   `M-<ESC>' (`eval-expression') is the most basic command for
+evaluating a Lisp expression interactively.  It reads the expression
+using the minibuffer, so you can execute any expression on a buffer
+regardless of what the buffer contains.  When evaluation is complete,
+the current buffer is once again the buffer that was current when
+`M-<ESC>' was typed.
+
+   `M-<ESC>' can easily confuse users, especially on keyboards with
+autorepeat, where it can result from holding down the <ESC> key for too
+long.  Therefore, `eval-expression' is normally a disabled command.
+Attempting to use this command asks for confirmation and gives you the
+option of enabling it; once you enable the command, you are no longer
+required to confirm.  *Note Disabling::.
+
+   In Emacs-Lisp mode, the key `C-M-x' is bound to the function
+`eval-defun', which parses the defun containing point or following point
+as a Lisp expression and evaluates it.  The value is printed in the echo
+area.  This command is convenient for installing in the Lisp environment
+changes that you have just made in the text of a function definition.
+
+   The command `C-x C-e' (`eval-last-sexp') performs a similar job but
+is available in all major modes, not just Emacs-Lisp mode.  It finds
+the sexp before point, reads it as a Lisp expression, evaluates it, and
+prints the value in the echo area.  It is sometimes useful to type in an
+expression and then, with point still after it, type `C-x C-e'.
+
+   If `C-M-x' or `C-x C-e' are given a numeric argument, they print the
+value by inserting it into the current buffer at point, rather than in
+the echo area.  The argument value does not matter.
+
+   The most general command for evaluating Lisp expressions from a
+buffer is `eval-region'.  `M-x eval-region' parses the text of the
+region as one or more Lisp expressions, evaluating them one by one.
+`M-x eval-current-buffer' is similar, but it evaluates the entire
+buffer.  This is a reasonable way to install the contents of a file of
+Lisp code that you are just ready to test.  After finding and fixing a
+bug, use `C-M-x' on each function that you change, to keep the Lisp
+world in step with the source file.

 
 

-`C-c /'
-     Move down and left ("southwest") after insertion
-     (`picture-movement-sw').
+\1f
+File: xemacs.info,  Node: Lisp Debug,  Next: Lisp Interaction,  Prev: Lisp Eval,  Up: Running
+
+The Emacs-Lisp Debugger
+=======================
+
+   XEmacs contains a debugger for Lisp programs executing inside it.
+This debugger is normally not used; many commands frequently get Lisp
+errors when invoked in inappropriate contexts (such as `C-f' at the end
+of the buffer) and it would be unpleasant to enter a special debugging
+mode in this case.  When you want to make Lisp errors invoke the
+debugger, you must set the variable `debug-on-error' to non-`nil'.
+Quitting with `C-g' is not considered an error, and `debug-on-error'
+has no effect on the handling of `C-g'.  However, if you set
+`debug-on-quit' to be non-`nil', `C-g' will invoke the debugger.  This
+can be useful for debugging an infinite loop; type `C-g' once the loop
+has had time to reach its steady state.  `debug-on-quit' has no effect
+on errors.
+
+   You can make Emacs enter the debugger when a specified function is
+called or at a particular place in Lisp code.  Use `M-x debug-on-entry'
+with argument FUN-NAME to have Emacs enter the debugger as soon as
+FUN-NAME is called. Use `M-x cancel-debug-on-entry' to make the
+function stop entering the debugger when called.  (Redefining the
+function also does this.)  To enter the debugger from some other place
+in Lisp code, you must insert the expression `(debug)' there and
+install the changed code with `C-M-x'.  *Note Lisp Eval::.
+
+   When the debugger is entered, it displays the previously selected
+buffer in one window and a buffer named `*Backtrace*' in another
+window.  The backtrace buffer contains one line for each level of Lisp
+function execution currently going on.  At the beginning of the buffer
+is a message describing the reason that the debugger was invoked, for
+example, an error message if it was invoked due to an error.
+
+   The backtrace buffer is read-only and is in Backtrace mode, a special
+major mode in which letters are defined as debugger commands.  The
+usual Emacs editing commands are available; you can switch windows to
+examine the buffer that was being edited at the time of the error, and
+you can switch buffers, visit files, and perform any other editing
+operations.  However, the debugger is a recursive editing level (*note
+Recursive Edit::); it is a good idea to return to the backtrace buffer
+and explicitly exit the debugger when you don't want to use it any
+more.  Exiting the debugger kills the backtrace buffer.
+
+   The contents of the backtrace buffer show you the functions that are
+executing and the arguments that were given to them.  It also allows you
+to specify a stack frame by moving point to the line describing that
+frame.  The frame whose line point is on is considered the "current
+frame".  Some of the debugger commands operate on the current frame.
+Debugger commands are mainly used for stepping through code one
+expression at a time.  Here is a list of them:
+
+`c'
+     Exit the debugger and continue execution.  In most cases,
+     execution of the program continues as if the debugger had never
+     been entered (aside from the effect of any variables or data
+     structures you may have changed while inside the debugger).  This
+     includes entry to the debugger due to function entry or exit,
+     explicit invocation, and quitting or certain errors.  Most errors
+     cannot be continued; trying to continue an error usually causes
+     the same error to occur again.
+
+`d'
+     Continue execution, but enter the debugger the next time a Lisp
+     function is called.  This allows you to step through the
+     subexpressions of an expression, and see what the subexpressions
+     do and what values they compute.
+
+     When you enter the debugger this way, Emacs flags the stack frame
+     for the function call from which you entered.  The same function
+     is then called when you exit the frame.  To cancel this flag, use
+     `u'.
+
+`b'
+     Set up to enter the debugger when the current frame is exited.
+     Frames that invoke the debugger on exit are flagged with stars.

 
 

-`C-c \'
-     Move down and right ("southeast") after insertion
-     (`picture-movement-se').
+`u'
+     Don't enter the debugger when the current frame is exited.  This
+     cancels a `b' command on a frame.

 
 

-   Two motion commands move based on the current Picture insertion
-direction.  The command `C-c C-f' (`picture-motion') moves in the same
-direction as motion after "insertion" currently does, while `C-c C-b'
-(`picture-motion-reverse') moves in the opposite direction.
+`e'
+     Read a Lisp expression in the minibuffer, evaluate it, and print
+     the value in the echo area.  This is equivalent to the command
+     `M-<ESC>', except that `e' is not normally disabled like `M-<ESC>'.

 
 

-\1f
-File: xemacs.info,  Node: Tabs in Picture,  Next: Rectangles in Picture,  Prev: Insert in Picture,  Up: Picture
-
-Picture Mode Tabs
-=================
-
-   Two kinds of tab-like action are provided in Picture mode.
-Context-based tabbing is done with `M-<TAB>' (`picture-tab-search').
-With no argument, it moves to a point underneath the next "interesting"
-character that follows whitespace in the previous non-blank line.
-"Next" here means "appearing at a horizontal position greater than the
-one point starts out at".  With an argument, as in `C-u M-<TAB>', the
-command moves to the next such interesting character in the current
-line.  `M-<TAB>' does not change the text; it only moves point.
-"Interesting" characters are defined by the variable
-`picture-tab-chars', which contains a string of characters considered
-interesting.  Its default value is `"!-~"'.
-
-   <TAB> itself runs `picture-tab', which operates based on the current
-tab stop settings; it is the Picture mode equivalent of
-`tab-to-tab-stop'.  Without arguments it just moves point, but with a
-numeric argument it clears the text that it moves over.
-
-   The context-based and tab-stop-based forms of tabbing are brought
-together by the command `C-c <TAB>' (`picture-set-tab-stops'.)  This
-command sets the tab stops to the positions which `M-<TAB>' would
-consider significant in the current line.  If you use this command with
-<TAB>, you can get the effect of context-based tabbing.  But `M-<TAB>'
-is more convenient in the cases where it is sufficient.
+`q'
+     Terminate the program being debugged; return to top-level Emacs
+     command execution.

 
 

-\1f
-File: xemacs.info,  Node: Rectangles in Picture,  Prev: Tabs in Picture,  Up: Picture
+     If the debugger was entered due to a `C-g' but you really want to
+     quit, not to debug, use the `q' command.

 
 

-Picture Mode Rectangle Commands
-===============================
+`r'
+     Return a value from the debugger.  The value is computed by
+     reading an expression with the minibuffer and evaluating it.

 
 

-   Picture mode defines commands for working on rectangular pieces of
-the text in ways that fit with the quarter-plane model.  The standard
-rectangle commands may also be useful (*note Rectangles::.).
+     The value returned by the debugger makes a difference when the
+     debugger was invoked due to exit from a Lisp call frame (as
+     requested with `b'); then the value specified in the `r' command
+     is used as the value of that frame.

 
 

-`C-c C-k'
-     Clear out the region-rectangle (`picture-clear-rectangle').  With
-     argument, kill it.
+     The debugger's return value also matters with many errors.  For
+     example, `wrong-type-argument' errors will use the debugger's
+     return value instead of the invalid argument; `no-catch' errors
+     will use the debugger value as a throw tag instead of the tag that
+     was not found.  If an error was signaled by calling the Lisp
+     function `signal', the debugger's return value is returned as the
+     value of `signal'.

 
 

-`C-c C-w R'
-     Similar but save rectangle contents in register R first
-     (`picture-clear-rectangle-to-register').
+\1f
+File: xemacs.info,  Node: Lisp Interaction,  Next: External Lisp,  Prev: Lisp Debug,  Up: Running
+
+Lisp Interaction Buffers
+========================
+
+   The buffer `*scratch*', which is selected when Emacs starts up, is
+provided for evaluating Lisp expressions interactively inside Emacs.
+Both the expressions you evaluate and their output goes in the buffer.
+
+   The `*scratch*' buffer's major mode is Lisp Interaction mode, which
+is the same as Emacs-Lisp mode except for one command, <LFD>.  In
+Emacs-Lisp mode, <LFD> is an indentation command.  In Lisp Interaction
+mode, <LFD> is bound to `eval-print-last-sexp'.  This function reads
+the Lisp expression before point, evaluates it, and inserts the value
+in printed representation before point.
+
+   The way to use the `*scratch*' buffer is to insert Lisp expressions
+at the end, ending each one with <LFD> so that it will be evaluated.
+The result is a complete typescript of the expressions you have
+evaluated and their values.
+
+   The rationale for this feature is that Emacs must have a buffer when
+it starts up, but that buffer is not useful for editing files since a
+new buffer is made for every file that you visit.  The Lisp interpreter
+typescript is the most useful thing I can think of for the initial
+buffer to do.  `M-x lisp-interaction-mode' will put any buffer in Lisp
+Interaction mode.

 
 

-`C-c C-y'
-     Copy last killed rectangle into the buffer by overwriting, with
-     upper left corner at point (`picture-yank-rectangle').  With
-     argument, insert instead.
+\1f
+File: xemacs.info,  Node: External Lisp,  Prev: Lisp Interaction,  Up: Running
+
+Running an External Lisp
+========================
+
+   Emacs has facilities for running programs in other Lisp systems.
+You can run a Lisp process as an inferior of Emacs, and pass
+expressions to it to be evaluated.  You can also pass changed function
+definitions directly from the Emacs buffers in which you edit the Lisp
+programs to the inferior Lisp process.
+
+   To run an inferior Lisp process, type `M-x run-lisp'.  This runs the
+program named `lisp', the same program you would run by typing `lisp'
+as a shell command, with both input and output going through an Emacs
+buffer named `*lisp*'.  In other words, any "terminal output" from Lisp
+will go into the buffer, advancing point, and any "terminal input" for
+Lisp comes from text in the buffer.  To give input to Lisp, go to the
+end of the buffer and type the input, terminated by <RET>.  The
+`*lisp*' buffer is in Inferior Lisp mode, which has all the special
+characteristics of Lisp mode and Shell mode (*note Shell Mode::).
+
+   Use Lisp mode to run the source files of programs in external Lisps.
+You can select this mode with `M-x lisp-mode'.  It is used automatically
+for files whose names end in `.l' or `.lisp', as most Lisp systems
+usually expect.
+
+   When you edit a function in a Lisp program you are running, the
+easiest way to send the changed definition to the inferior Lisp process
+is the key `C-M-x'.  In Lisp mode, this key runs the function
+`lisp-send-defun', which finds the defun around or following point and
+sends it as input to the Lisp process.  (Emacs can send input to any
+inferior process regardless of what buffer is current.)
+
+   Contrast the meanings of `C-M-x' in Lisp mode (for editing programs
+to be run in another Lisp system) and Emacs-Lisp mode (for editing Lisp
+programs to be run in Emacs): in both modes it has the effect of
+installing the function definition that point is in, but the way of
+doing so is different according to where the relevant Lisp environment
+is found.  *Note Lisp Modes::.

 
 

-`C-c C-x R'
-     Similar, but use the rectangle in register R
-     (`picture-yank-rectangle-from-register').
+\1f
+File: xemacs.info,  Node: Packages,  Next: Basic,  Prev: Startup Paths,  Up: Top

 
 

-   The picture rectangle commands `C-c C-k' (`picture-clear-rectangle')
-and `C-c C-w' (`picture-clear-rectangle-to-register') differ from the
-standard rectangle commands in that they normally clear the rectangle
-instead of deleting it; this is analogous with the way `C-d' is changed
-in Picture mode.
+Packages
+========

 
 

-   However, deletion of rectangles can be useful in Picture mode, so
-these commands delete the rectangle if given a numeric argument.
+   The XEmacs 21 distribution comes only with a very basic set of
+built-in modes and packages.  Most of the packages that were part of
+the distribution of earlier versions of XEmacs are now available
+separately.  The installer as well as the user can choose which
+packages to install; the actual installation process is easy.  This
+gives an installer the ability to tailor an XEmacs installation for
+local needs with safe removal of unnecessary code.

 
 

-   The Picture mode commands for yanking rectangles differ from the
-standard ones in overwriting instead of inserting.  This is the same
-way that Picture mode insertion of other text is different from other
-modes.  `C-c C-y' (`picture-yank-rectangle') inserts (by overwriting)
-the rectangle that was most recently killed, while `C-c C-x'
-(`picture-yank-rectangle-from-register') does for the rectangle found
-in a specified register.
+* Menu:

 
 

-   Since most region commands in Picture mode operate on rectangles,
-when you select a region of text with the mouse in Picture mode, it is
-highlighted as a rectangle.
+* Package Terminology:: Understanding different kinds of packages.
+* Installing Packages:: How to install packages.
+* Building Packages::   Building packages from CVS sources.
+* Local.rules File::    This is an important file don't forget to create/edit it.
+* Creating Packages::   The basics.
+* Available Packages::  A brief directory of packaged LISP.

 
 \1f
 
 \1f

-File: xemacs.info,  Node: Sending Mail,  Next: Reading Mail,  Prev: Picture,  Up: Top
+File: xemacs.info,  Node: Package Terminology,  Next: Installing Packages,  Up: Packages

 
 

-Sending Mail
-************
+Package Terminology:
+====================

 
 

-   To send a message in Emacs, start by typing the command (`C-x m') to
-select and initialize the `*mail*' buffer.  You can then edit the text
-and headers of the message in the mail buffer, and type the command
-(`C-c C-c') to send the message.
+Package Flavors
+---------------

 
 

-`C-x m'
-     Begin composing a message to send (`mail').
+   There are two main flavors of packages.

 
 

-`C-x 4 m'
-     Likewise, but display the message in another window
-     (`mail-other-window').
+   * Regular Packages A regular package is one in which multiple files
+     are involved and one may not in general safely remove any of them.

 
 

-`C-c C-c'
-     In Mail mode, send the message and switch to another buffer
-     (`mail-send-and-exit').
+   * Single-File Packages A single-file package is an aggregate
+     collection of thematically related but otherwise independent lisp
+     files.  These files are bundled together for download convenience
+     and individual files may be deleted at will without any loss of
+     functionality.  However, we would recommend that you follow this
+     rule of thumb: "When in doubt, don't delete".

 
 

-   The command `C-x m' (`mail') selects a buffer named `*mail*' and
-initializes it with the skeleton of an outgoing message.  `C-x 4 m'
-(`mail-other-window') selects the `*mail*' buffer in a different
-window, leaving the previous current buffer visible.
+Package Distributions
+---------------------

 
 

-   Because the buffer for mail composition is an ordinary Emacs buffer,
-you can switch to other buffers while in the middle of composing mail,
-and switch back later (or never).  If you use the `C-x m' command again
-when you have been composing another message but have not sent it, a
-new mail buffer will be created; in this way, you can compose multiple
-messages at once.  You can switch back to and complete an unsent
-message by using the normal buffer selection mechanisms.
+   XEmacs Lisp packages are distributed in two ways, depending on the
+intended use.  Binary Packages are for installers and end-users that can
+be installed directly into an XEmacs package directory.  Source Packages
+are for developers and include all files necessary for rebuilding
+bytecompiled lisp and creating tarballs for distribution.

 
 

-   `C-u C-x m' is another way to switch back to a message in progress:
-it will search for an existing, unsent mail message buffer and select
-it.
+Binary Packages
+---------------

 
 

-* Menu:
+   Binary packages may be installed directly into an XEmacs package
+hierarchy.

 
 

-* Format: Mail Format.    Format of the mail being composed.
-* Headers: Mail Headers.  Details of allowed mail header fields.
-* Mode: Mail Mode.        Special commands for editing mail being composed.
+Source Packages
+---------------
+
+   Source packages contain all of the Package author's (where
+appropriate in regular packages) source code plus all of the files
+necessary to build distribution tarballs (Unix Tar format files,
+gzipped for space savings).
+
+   Currently, source packages are only available via CVS.  See
+<http://cvs.xemacs.org/> for details.

 
 \1f
 
 \1f

-File: xemacs.info,  Node: Mail Format,  Next: Mail Headers,  Prev: Sending Mail,  Up: Sending Mail
+File: xemacs.info,  Node: Installing Packages,  Next: Building Packages,  Prev: Package Terminology,  Up: Packages

 
 

-The Format of the Mail Buffer
-=============================
+Installing Packages:
+====================

 
 

-   In addition to the "text" or contents, a message has "header
-fields", which say who sent it, when, to whom, why, and so on.  Some
-header fields, such as the date and sender, are created automatically
-after the message is sent.  Others, such as the recipient names, must
-be specified by you in order to send the message properly.
+Getting Started
+---------------

 
 

-   Mail mode provides a few commands to help you edit some header
-fields, and some are preinitialized in the buffer automatically at
-times.  You can insert or edit any header fields using ordinary editing
-commands.
+   When you first download XEmacs 21, you will usually first grab the
+"core distribution", a file called `xemacs-21.x.x.tar.gz'. (Replace the
+21.x.x by the current version number.)  The core distribution contains
+the sources of XEmacs and a minimal set of Emacs Lisp files, which are
+in the subdirectory named `lisp'.  This subdirectory used to contain
+all Emacs Lisp files distributed with XEmacs.  Now, to conserve disk
+space, most non-essential packages were made optional.

 
 

-   The line in the buffer that says:
+Choosing the Packages You Need
+------------------------------

 
 

-     --text follows this line--
+   The *Note Available Packages:: can currently be found in the same
+ftp directory where you grabbed the core distribution from, and are
+located in the subdirectory `packages'.  Package file names follow the
+naming convention `<package-name>-<version>-pkg.tar.gz'.

 
 

-is a special delimiter that separates the headers you have specified
-from the text.  Whatever follows this line is the text of the message;
-the headers precede it.  The delimiter line itself does not appear in
-the message actually sent.  The text used for the delimiter line is
-controlled by the variable `mail-header-separator'.
+   If you have EFS *Note (EFS)::, packages can be installed over the
+network.  Alternatively, if you have copies of the packages locally,
+you can install packages from a local disk or CDROM.

 
 

-   Here is an example of what the headers and text in the `*mail*'
-buffer might look like.
+   The file `etc/PACKAGES' in the core distribution contains a list of
+the *Note Available Packages:: at the time of the XEmacs release.
+Packages are also listed on the `Options' menu under:

 
 

-     To: rms@mc
-     CC: mly@mc, rg@oz
-     Subject: The XEmacs User's Manual
-     --Text follows this line--
-     Please ignore this message.
+             Options -> Customize -> Emacs -> Packages

 
 

-\1f
-File: xemacs.info,  Node: Mail Headers,  Next: Mail Mode,  Prev: Mail Format,  Up: Sending Mail
+   However, don't select any of these menu picks unless you actually
+want to install the given package (and have properly configured your
+system to do so).

 
 

-Mail Header Fields
-==================
+   You can also get a list of available packages, and whether or not
+they are installed, using the visual package browser and installer.
+You can access it via the menus:

 
 

-   There are several header fields you can use in the `*mail*' buffer.
-Each header field starts with a field name at the beginning of a line,
-terminated by a colon.  It does not matter whether you use upper or
-lower case in the field name.  After the colon and optional whitespace
-comes the contents of the field.
-
-`To'
-     This field contains the mailing addresses of the message.
-
-`Subject'
-     The contents of the `Subject' field should be a piece of text that
-     says what the message is about.  Subject fields are useful because
-     most mail-reading programs can provide a summary of messages,
-     listing the subject of each message but not its text.
-
-`CC'
-     This field contains additional mailing addresses to send the
-     message to, but whose readers should not regard the message as
-     addressed to them.
-
-`BCC'
-     This field contains additional mailing addresses to send the
-     message to, but which should not appear in the header of the
-     message actually sent.
-
-`FCC'
-     This field contains the name of one file (in Unix mail file
-     format) to which a copy of the message should be appended when the
-     message is sent.
-
-`From'
-     Use the `From' field to say who you are, when the account you are
-     using to send the mail is not your own.  The contents of the
-     `From' field should be a valid mailing address, since replies will
-     normally go there.
-
-`Reply-To'
-     Use the `Reply-To' field to direct replies to a different address,
-     not your own. `From' and `Reply-To' have the same effect on where
-     replies go, but they convey a different meaning to the person who
-     reads the message.
-
-`In-Reply-To'
-     This field contains a piece of text describing a message you are
-     replying to.  Some mail systems can use the information to
-     correlate related pieces of mail.  This field is normally filled
-     in by your mail handling package when you are replying to a
-     message and you never need to think about it.
-
-The `To', `CC', `BCC' and `FCC' fields can appear any number of times,
-to specify many places to send the message.
-
-The `To', `CC', and `BCC', fields can have continuation lines.  All the
-lines starting with whitespace, following the line on which the field
-starts, are considered part of the field.  For example,
-
-     To: foo@here, this@there,
-       me@gnu.cambridge.mass.usa.earth.spiral3281
-
-If you have a `~/.mailrc' file, Emacs scans it for mail aliases the
-first time you try to send mail in an Emacs session.  Emacs expands
-aliases found in the `To', `CC', and `BCC' fields where appropriate.
-You can set the variable `mail-abbrev-mailrc-file' to the name of the
-file with mail aliases.  If `nil', `~/.mailrc' is used.
-
-   Your `.mailrc' file ensures that word-abbrevs are defined for each
-of your mail aliases when point is in a `To', `CC', `BCC', or `From'
-field.  The aliases are defined in your `.mailrc' file or in a file
-specified by the MAILRC environment variable if it exists.  Your mail
-aliases expand any time you type a word-delimiter at the end of an
-abbreviation.
-
-   In this version of Emacs, what you see is what you get: in contrast
-to some other versions, no abbreviations are expanded after you have
-sent the mail.  This means you don't suffer the annoyance of having the
-system do things behind your back -- if the system rewrites an address
-you typed, you know it immediately, instead of after the mail has been
-sent and it's too late to do anything about it.  For example, you will
-never again be in trouble because you forgot to delete an old alias
-from your `.mailrc' and a new local user is given a userid which
-conflicts with one of your aliases.
-
-   Your mail alias abbrevs are in effect only when point is in an
-appropriate header field. The mail aliases will not expand in the body
-of the message, or in other header fields.  The default mode-specific
-abbrev table `mail-mode-abbrev-table' is used instead if defined.  That
-means if you have been using mail-mode specific abbrevs, this code will
-not adversely affect you.  You can control which header fields the
-abbrevs are used in by changing the variable `mail-abbrev-mode-regexp'.
-
-   If auto-fill mode is on, abbrevs wrap at commas instead of at word
-boundaries, and header continuation lines will be properly indented.
-
-   You can also insert a mail alias with
-`mail-interactive-insert-alias'.  This function, which is bound to `C-c
-C-a', prompts you for an alias (with completion) and inserts its
-expansion at point.
-
-   In this version of Emacs, it is possible to have lines like the
-following in your `.mailrc' file:
-
-          alias someone "John Doe <doe@quux.com>"
-
-   That is, if you want an address to have embedded spaces, simply
-surround it with double-quotes.  The quotes are necessary because the
-format of the `.mailrc' file uses spaces as address delimiters.
-
-   Aliases in the `.mailrc' file may be nested. For example, assume you
-define aliases like:
-          alias group1 fred ethel
-          alias group2 larry curly moe
-          alias everybody group1 group2
-
-   When you now type `everybody' on the `To' line, it will expand to:
-          fred, ethyl, larry, curly, moe
-
-   Aliases may contain forward references; the alias of `everybody' in
-the example above can precede the aliases of `group1' and `group2'.
-
-   In this version of Emacs, you can use the `source' `.mailrc' command
-for reading aliases from some other file as well.
-
-   Aliases may contain hyphens, as in `"alias foo-bar foo@bar"', even
-though word-abbrevs normally cannot contain hyphens.
-
-   To read in the contents of another `.mailrc'-type file from Emacs,
-use the command `M-x merge-mail-aliases'.  The `rebuild-mail-aliases'
-command is similar, but deletes existing aliases first.
-
-   If you want multiple addresses separated by a string other than `,'
-(a comma), then set the variable `mail-alias-seperator-string' to it.
-This has to be a comma bracketed by whitespace if you want any kind  of
-reasonable behavior.
-
-   If the variable `mail-archive-file-name' is non-`nil', it should be
-a string naming a file.  Each time you start to edit a message to send,
-an `FCC' field is entered for that file.  Unless you remove the `FCC'
-field, every message is written into that file when it is sent.
+             Options -> Manage Packages -> List & Install

 
 

-\1f
-File: xemacs.info,  Node: Mail Mode,  Prev: Mail Headers,  Up: Sending Mail
-
-Mail Mode
-=========
-
-   The major mode used in the `*mail*' buffer is Mail mode.  Mail mode
-is similar to Text mode, but several commands are provided on the `C-c'
-prefix.  These commands all deal specifically with editing or sending
-the message.
-
-`C-c C-s'
-     Send the message, and leave the `*mail*' buffer selected
-     (`mail-send').
-
-`C-c C-c'
-     Send the message, and select some other buffer
-     (`mail-send-and-exit').
-
-`C-c C-f C-t'
-     Move to the `To' header field, creating one if there is none
-     (`mail-to').
-
-`C-c C-f C-s'
-     Move to the `Subject' header field, creating one if there is none
-     (`mail-subject').
-
-`C-c C-f C-c'
-     Move to the `CC' header field, creating one if there is none
-     (`mail-cc').
-
-`C-c C-w'
-     Insert the file `~/.signature' at the end of the message text
-     (`mail-signature').
-
-`C-c C-y'
-     Yank the selected message (`mail-yank-original').
-
-`C-c C-q'
-     Fill all paragraphs of yanked old messages, each individually
-     (`mail-fill-yanked-message').
-
-`<button3>'
-     Pops up a menu of useful mail-mode commands.
-
-   There are two ways to send a message.  `C-c C-c'
-(`mail-send-and-exit') is the usual way to send the message.  It sends
-the message and then deletes the window (if there is another window) or
-switches to another buffer.  It puts the `*mail*' buffer at the lowest
-priority for automatic reselection, since you are finished with using
-it.  `C-c C-s' (`mail-send') sends the message and marks the `*mail*'
-buffer unmodified, but leaves that buffer selected so that you can
-modify the message (perhaps with new recipients) and send it again.
-
-   Mail mode provides some other special commands that are useful for
-editing the headers and text of the message before you send it.  There
-are three commands defined to move point to particular header fields,
-all based on the prefix `C-c C-f' (`C-f' is for "field").  They are
-`C-c C-f C-t' (`mail-to') to move to the `To' field, `C-c C-f C-s'
-(`mail-subject') for the `Subject' field, and `C-c C-f C-c' (`mail-cc')
-for the `CC' field.  These fields have special motion commands because
-they are edited most frequently.
-
-   `C-c C-w' (`mail-signature') adds a standard piece of text at the
-end of the message to say more about who you are.  The text comes from
-the file `.signature' in your home directory.
-
-   When you use an Rmail command to send mail from the Rmail mail
-reader, you can use `C-c C-y' `mail-yank-original' inside the `*mail*'
-buffer to insert the text of the message you are replying to.  Normally
-Rmail indents each line of that message four spaces and eliminates most
-header fields.  A numeric argument specifies the number of spaces to
-indent.  An argument of just `C-u' says not to indent at all and not to
-eliminate anything.  `C-c C-y' always uses the current message from the
-`RMAIL' buffer, so you can insert several old messages by selecting one
-in `RMAIL', switching to `*mail*' and yanking it, then switching back
-to `RMAIL' to select another.
-
-   After using `C-c C-y', you can use the command `C-c C-q'
-(`mail-fill-yanked-message') to fill the paragraphs of the yanked old
-message or messages.  One use of `C-c C-q' fills all such paragraphs,
-each one separately.
-
-   Clicking the right mouse button in a mail buffer pops up a menu of
-the above commands, for easy access.
-
-   Turning on Mail mode (which `C-x m' does automatically) calls the
-value of `text-mode-hook', if it is not void or `nil', and then calls
-the value of `mail-mode-hook' if that is not void or `nil'.
+   Or, you can get to it via the keyboard:

 
 

-\1f
-File: xemacs.info,  Node: Reading Mail,  Next: Calendar/Diary,  Prev: Sending Mail,  Up: Top
-
-Reading Mail
-************
-
-   XEmacs provides three separate mail-reading packages.  Each one
-comes with its own manual, which is included standard with the XEmacs
-distribution.
-
-   The recommended mail-reading package for new users is VM.  VM works
-with standard Unix-mail-format folders and was designed as a replacement
-for the older Rmail.
-
-   XEmacs also provides a sophisticated and comfortable front-end to the
-MH mail-processing system, called `mh-e'.  Unlike in other mail
-programs, folders in MH are stored as file-system directories, with
-each message occupying one (numbered) file.  This facilitates working
-with mail using shell commands, and many other features of MH are also
-designed to integrate well with the shell and with shell scripts.  Keep
-in mind, however, that in order to use mh-e you must have the MH
-mail-processing system installed on your computer.
-
-   Finally, XEmacs provides the Rmail package.  Rmail is (currently) the
-only mail reading package distributed with FSF GNU Emacs, and is
-powerful in its own right.  However, it stores mail folders in a special
-format called `Babyl', that is incompatible with all other
-frequently-used mail programs.  A utility program is provided for
-converting Babyl folders to standard Unix-mail format; however, unless
-you already have mail in Babyl-format folders, you should consider
-using VM or mh-e instead. (If at times you have to use FSF Emacs, it is
-not hard to obtain and install VM for that editor.)
+     M-x pui-list-packages

 
 

-\1f
-File: xemacs.info,  Node: Calendar/Diary,  Next: Sorting,  Prev: Reading Mail,  Up: Top
-
-Calendar Mode and the Diary
-===========================
-
-   Emacs provides the functions of a desk calendar, with a diary of
-planned or past events.  To enter the calendar, type `M-x calendar';
-this displays a three-month calendar centered on the current month, with
-point on the current date.  With a numeric argument, as in `C-u M-x
-calendar', it prompts you for the month and year to be the center of the
-three-month calendar.  The calendar uses its own buffer, whose major
-mode is Calendar mode.
-
-   `Button2' in the calendar brings up a menu of operations on a
-particular date; `Buttons3' brings up a menu of commonly used calendar
-features that are independent of any particular date.  To exit the
-calendar, type `q'.  *Note Customizing the Calendar and Diary:
-(elisp)Calendar, for customization information about the calendar and
-diary.
+   Hint to system administrators of multi-user systems: it might be a
+good idea to install all packages and not interfere with the wishes of
+your users.

 
 

-* Menu:
+   If you can't find which package provides the feature you require, try
+using the `package-get-package-provider' function. Eg., if you know
+that you need `thingatpt', type:

 
 

-* Calendar Motion::        Moving through the calendar; selecting a date.
-* Scroll Calendar::        Bringing earlier or later months onto the screen.
-* Mark and Region::        Remembering dates, the mark ring.
-* General Calendar::       Exiting or recomputing the calendar.
-* LaTeX Calendar::         Print a calendar using LaTeX.
-* Holidays::               Displaying dates of holidays.
-* Sunrise/Sunset::         Displaying local times of sunrise and sunset.
-* Lunar Phases::           Displaying phases of the moon.
-* Other Calendars::        Converting dates to other calendar systems.
-* Diary::                  Displaying events from your diary.
-* Calendar Customization:: Altering the behavior of the features above.
+     M-x package-get-package-provider RET thingatpt

 
 

-\1f
-File: xemacs.info,  Node: Calendar Motion,  Next: Scroll Calendar,  Prev: Calendar/Diary,  Up: Calendar/Diary
+   which will return something like (fsf-compat "1.08"). You can the use
+one of the methods above for installing the package you want.

 
 

-Movement in the Calendar
-------------------------
+XEmacs and Installing Packages
+------------------------------

 
 

-   Calendar mode lets you move through the calendar in logical units of
-time such as days, weeks, months, and years.  If you move outside the
-three months originally displayed, the calendar display "scrolls"
-automatically through time to make the selected date visible.  Moving to
-a date lets you view its holidays or diary entries, or convert it to
-other calendars; moving longer time periods is also useful simply to
-scroll the calendar.
+   There are three main ways to install packages:

 
 * Menu:
 
 
 * Menu:
 

-* Calendar Unit Motion::       Moving by days, weeks, months, and years.
-* Move to Beginning or End::   Moving to start/end of weeks, months, and years.
-* Specified Dates::            Moving to the current date or another
-                               specific date.
+* Sumo::              All at once, using the 'Sumo Tarball'.
+* Manually::          Using individual package tarballs.
+* Automatically::     Using the package tools from XEmacs.
+* Which Packages::    Which packages to install.
+* Removing Packages:: Removing packages.
+
+   But regardless of the method you use to install packages, they can
+only be used by XEmacs after a restart.

 
 \1f
 
 \1f

-File: xemacs.info,  Node: Calendar Unit Motion,  Next: Move to Beginning or End,  Prev: Calendar Motion,  Up: Calendar Motion
+File: xemacs.info,  Node: Sumo,  Next: Manually,  Up: Installing Packages

 
 

-Motion by Integral Days, Weeks, Months, Years
-.............................................
+Installing the Sumo Packages:
+=============================

 
 

-   The commands for movement in the calendar buffer parallel the
-commands for movement in text.  You can move forward and backward by
-days, weeks, months, and years.
+   Those with little time, cheap connections and plenty of disk space
+can install all the packages at once using the sumo tarballs.  Download
+the file: `xemacs-sumo.tar.gz'

 
 

-`C-f'
-     Move point one day forward (`calendar-forward-day').
+   For an XEmacs compiled with Mule you also need:
+`xemacs-mule-sumo.tar.gz'

 
 

-`C-b'
-     Move point one day backward (`calendar-backward-day').
+   N.B. They are called 'Sumo Tarballs' for good reason. They are
+currently about 19MB and 4.5MB (gzipped) respectively.

 
 

-`C-n'
-     Move point one week forward (`calendar-forward-week').
+   Install them by:

 
 

-`C-p'
-     Move point one week backward (`calendar-backward-week').
+   `cd $prefix/lib/xemacs ; gunzip -c <tarballname> | tar xvf - RET'

 
 

-`M-}'
-     Move point one month forward (`calendar-forward-month').
+   Or, if you have GNU tar:

 
 

-`M-{'
-     Move point one month backward (`calendar-backward-month').
+   `cd $prefix/lib/xemacs ; tar zxvf /path/to/<tarballname> RET'

 
 

-`C-x ]'
-     Move point one year forward (`calendar-forward-year').
+   As the Sumo tarballs are not regenerated as often as the individual
+packages, it is recommended that you use the automatic package tools
+afterwards to pick up any recent updates.

 
 

-`C-x ['
-     Move point one year backward (`calendar-backward-year').
+\1f
+File: xemacs.info,  Node: Manually,  Next: Automatically,  Prev: Sumo,  Up: Installing Packages
+
+Manual Package Installation:
+============================

 
 

-   The day and week commands are natural analogues of the usual Emacs
-commands for moving by characters and by lines.  Just as `C-n' usually
-moves to the same column in the following line, in Calendar mode it
-moves to the same day in the following week.  And `C-p' moves to the
-same day in the previous week.
+   Fetch the packages from the FTP site, CD-ROM whatever. The filenames
+have the form `name-<version>-pkg.tar.gz' and are gzipped tar files. For
+a fresh install it is sufficient to untar the file at the top of the
+package hierarchy.

 
 

-   The arrow keys are equivalent to `C-f', `C-b', `C-n' and `C-p', just
-as they normally are in other modes.
+   Note: If you are upgrading packages already installed, it's best to
+remove the old package first *Note Removing Packages::.

 
 

-   The commands for motion by months and years work like those for
-weeks, but move a larger distance.  The month commands `M-}' and `M-{'
-move forward or backward by an entire month's time.  The year commands
-`C-x ]' and `C-x [' move forward or backward a whole year.
+   For example if we are installing the `xemacs-base' package (version
+1.48):

 
 

-   The easiest way to remember these commands is to consider months and
-years analogous to paragraphs and pages of text, respectively.  But the
-commands themselves are not quite analogous.  The ordinary Emacs
-paragraph commands move to the beginning or end of a paragraph, whereas
-these month and year commands move by an entire month or an entire
-year, which usually involves skipping across the end of a month or year.
+        mkdir $prefix/lib/xemacs/xemacs-packages RET # if it does not exist yet
+        cd $prefix/lib/xemacs/xemacs-packages RET
+        gunzip -c /path/to/xemacs-base-1.48-pkg.tar.gz | tar xvf - RET
+     
+     Or if you have GNU tar, the last step can be:
+     
+        tar zxvf /path/to/xemacs-base-1.48-pkg.tar.gz RET

 
 

-   All these commands accept a numeric argument as a repeat count.  For
-convenience, the digit keys and the minus sign specify numeric
-arguments in Calendar mode even without the Meta modifier.  For example,
-`100 C-f' moves point 100 days forward from its present location.
+   For MULE related packages, it is best to untar into the mule-packages
+hierarchy, i.e. for the `mule-base' package, version 1.37:
+
+        mkdir $prefix/lib/xemacs/mule-packages RET # if it does not exist yet
+        cd $prefix/lib/xemacs/mule-packages RET
+        gunzip -c /path/to/mule-base-1.37-pkg.tar.gz | tar xvf - RET
+     
+     Or if you have GNU tar, the last step can be:
+     
+        tar zxvf /path/to/mule-base-1.37-pkg.tar.gz RET

 
 \1f
 
 \1f

-File: xemacs.info,  Node: Move to Beginning or End,  Next: Specified Dates,  Prev: Calendar Unit Motion,  Up: Calendar Motion
+File: xemacs.info,  Node: Automatically,  Next: Which Packages,  Prev: Manually,  Up: Installing Packages

 
 

-Beginning or End of Week, Month or Year
-.......................................
+Automatic Package Installation:
+===============================

 
 

-   A week (or month, or year) is not just a quantity of days; we think
-of weeks (months, years) as starting on particular dates.  So Calendar
-mode provides commands to move to the beginning or end of a week, month
-or year:
+   XEmacs comes with some tools to make the periodic updating and
+installing easier. It will notice if new packages or versions are
+available and will fetch them from the FTP site.

 
 

-`C-a'
-     Move point to start of week (`calendar-beginning-of-week').
+   Unfortunately this requires that a few packages are already in place.
+You will have to install them by hand as above or use a SUMO tarball.
+This requirement will hopefully go away in the future. The packages you
+need are:

 
 

-`C-e'
-     Move point to end of week (`calendar-end-of-week').
+        efs          - To fetch the files from the FTP site or mirrors.
+        xemacs-base  - Needed by efs.
+     
+     and optionally:
+     
+        mule-base    - Needed if you want to use XEmacs with MULE.

 
 

-`M-a'
-     Move point to start of month (`calendar-beginning-of-month').
+   After installing these by hand, fire up XEmacs and follow these
+steps.

 
 

-`M-e'
-     Move point to end of month (`calendar-end-of-month').
+   Note: The menus in XEmacs 21.2.x and up have changed slightly, so
+where I mention "Options -> Manage Packages", substitute "Tools ->
+Packages".

 
 

-`M-<'
-     Move point to start of year (`calendar-beginning-of-year').
+  1. Choose a download site.  via menu: Options -> Manages Packages ->
+     Add Download Site via keyb: `M-x customize-variable RET
+     package-get-remote RET' (put in the details of remote host and
+     directory)

 
 

-`M->'
-     Move point to end of year (`calendar-end-of-year').
+     If the package tarballs _AND_ the package-index file are in a
+     local directory, you can: `M-x pui-add-install-directory RET'

 
 

-   These commands also take numeric arguments as repeat counts, with the
-repeat count indicating how many weeks, months, or years to move
-backward or forward.
+  2. Obtain a list of packages and display the list in a buffer named
+     `*Packages*'.  menu: Options -> Manage Packages -> List & Install
+     keyb: `M-x pui-list-packages RET'

 
 

-   By default, weeks begin on Sunday.  To make them begin on Monday
-instead, set the variable `calendar-week-start-day' to 1.
+     XEmacs will now connect to the remote site and download the latest
+     package-index file.  If you see an error about the package-index
+     entries not being PGP signed, you can safely ignore this because
+     PGP has not been integrated into the XEmacs package tools yet.

 
 

-\1f
-File: xemacs.info,  Node: Specified Dates,  Prev: Move to Beginning or End,  Up: Calendar Motion
+     The visual package browser will then display a list of all
+     packages.  Help information will be displayed at the very bottom
+     of the buffer; you may have to scroll down to see it.  You can
+     also press `?' to get the same help.  From this buffer, you can
+     tell the package status by the character in the first column:

 
 

-Particular Dates
-................
+    `-'
+          The package has not been installed.

 
 

-   Calendar mode provides commands for moving to a particular date
-specified in various ways.
+    `*'
+          The package has been installed, but a newer version is
+          available.  The current version is out-of-date.

 
 

-`g d'
-     Move point to specified date (`calendar-goto-date').
+    `+'
+          The package has been marked for installation/update.

 
 

-`o'
-     Center calendar around specified month (`calendar-other-month').
+     If there is no character in the first column, the package has been
+     installed and is up-to-date.

 
 

-`.'
-     Move point to today's date (`calendar-goto-today').
+     From here, you can select or unselect packages for installation
+     using the <RET> key, the `Mouse-2' button or selecting "Select"
+     from the (Popup) Menu.  Once you've finished selecting the
+     packages, you can press the `x' key (or use the menu) to actually
+     install the packages. Note that you will have to restart XEmacs
+     for XEmacs to recognize any new packages.

 
 

-   `g d' (`calendar-goto-date') prompts for a year, a month, and a day
-of the month, and then moves to that date.  Because the calendar
-includes all dates from the beginning of the current era, you must type
-the year in its entirety; that is, type `1990', not `90'.
+     Key summary:

 
 

-   `o' (`calendar-other-month') prompts for a month and year, then
-centers the three-month calendar around that month.
+    `?'
+          Display simple help.

 
 

-   You can return to today's date with `.'  (`calendar-goto-today').
+    `<RET>'
+    `<Mouse-2>'
+          Toggle between selecting and unselecting a package for
+          installation.

 
 

-\1f
-File: xemacs.info,  Node: Scroll Calendar,  Next: Mark and Region,  Prev: Calendar Motion,  Up: Calendar/Diary
-
-Scrolling the Calendar through Time
------------------------------------
-
-   The calendar display scrolls automatically through time when you
-move out of the visible portion.  You can also scroll it manually.
-Imagine that the calendar window contains a long strip of paper with
-the months on it.  Scrolling it means moving the strip so that new
-months become visible in the window.
-
-`C-x <'
-     Scroll calendar one month forward (`scroll-calendar-left').
-
-`C-x >'
-     Scroll calendar one month backward (`scroll-calendar-right').
-
-`C-v'
-`<NEXT>'
-     Scroll calendar three months forward
-     (`scroll-calendar-left-three-months').
-
-`M-v'
-`<PRIOR>'
-     Scroll calendar three months backward
-     (`scroll-calendar-right-three-months').
-
-   The most basic calendar scroll commands scroll by one month at a
-time.  This means that there are two months of overlap between the
-display before the command and the display after.  `C-x <' scrolls the
-calendar contents one month to the left; that is, it moves the display
-forward in time.  `C-x >' scrolls the contents to the right, which
-moves backwards in time.
-
-   The commands `C-v' and `M-v' scroll the calendar by an entire
-"screenful"--three months--in analogy with the usual meaning of these
-commands.  `C-v' makes later dates visible and `M-v' makes earlier
-dates visible.  These commands take a numeric argument as a repeat
-count; in particular, since `C-u' multiplies the next command by four,
-typing `C-u C-v' scrolls the calendar forward by a year and typing `C-u
-M-v' scrolls the calendar backward by a year.
-
-   The function keys <NEXT> and <PRIOR> are equivalent to `C-v' and
-`M-v', just as they are in other modes.
+    `x'
+          Install selected packages.

 
 

-\1f
-File: xemacs.info,  Node: Mark and Region,  Next: General Calendar,  Prev: Scroll Calendar,  Up: Calendar/Diary
-
-The Mark and the Region
------------------------
-
-   The concept of the mark applies to the calendar just as to any other
-buffer, but it marks a *date*, not a *position* in the buffer.  The
-region consists of the days between the mark and point (including the
-starting and stopping dates).
-
-`C-SPC'
-     Set the mark to today's date (`calendar-set-mark').
-
-`C-@'
-     The same.
-
-`C-x C-x'
-     Interchange mark and point (`calendar-exchange-point-and-mark').
-
-`M-='
-     Display the number of days in the current region
-     (`calendar-count-days-region').
-
-   You set the mark in the calendar, as in any other buffer, by using
-`C-@' or `C-SPC' (`calendar-set-mark').  You return to the marked date
-with the command `C-x C-x' (`calendar-exchange-point-and-mark') which
-puts the mark where point was and point where mark was.  The calendar
-is scrolled as necessary, if the marked date was not visible on the
-screen.  This does not change the extent of the region.
-
-   To determine the number of days in the region, type `M-='
-(`calendar-count-days-region').  The numbers of days printed is
-*inclusive*; that is, it includes the days specified by mark and point.
-
-   The main use of the mark in the calendar is to remember dates that
-you may want to go back to.  To make this feature more useful, the mark
-ring (*note Mark Ring::.) operates exactly as in other buffers:  Emacs
-remembers 16 previous locations of the mark.  To return to a marked
-date, type `C-u C-SPC' (or `C-u C-@'); this is the command
-`calendar-set-mark' given a numeric argument.  It moves point to where
-the mark was, restores the mark from the ring of former marks, and
-stores the previous point at the end of the mark ring.  So, repeated
-use of this command moves point through all the old marks on the ring,
-one by one.
+    `<SPC>'
+          View, in the minibuffer, additional information about the
+          package, such as the package date (not the build date) and
+          the package author.  Moving the mouse over a package name
+          will also do the same thing.

 
 

-\1f
-File: xemacs.info,  Node: General Calendar,  Next: LaTeX Calendar,  Prev: Mark and Region,  Up: Calendar/Diary
+    `v'
+          Toggle between verbose and non-verbose package display.

 
 

-Miscellaneous Calendar Commands
--------------------------------
+    `g'
+          Refresh the package display.

 
 

-`p d'
-     Display day-in-year (`calendar-print-day-of-year').
+    `q'
+          Kill the package buffer.

 
 

-`?'
-     Briefly describe calendar commands (`describe-calendar-mode').
+     Moving the mouse over a package will also cause additional
+     information about the package to be displayed in the minibuffer.

 
 

-`C-c C-l'
-     Regenerate the calendar window (`redraw-calendar').
+  3. Choose the packages you wish to install.  mouse: Click button 2 on
+     the package name.   keyb: `RET' on the package name

 
 

-`SPC'
-     Scroll the next window (`scroll-other-window').
+  4. Make sure you have everything you need.  menu: Packages -> Add
+     Required keyb: `r'

 
 

-`q'
-     Exit from calendar (`exit-calendar').
+     XEmacs will now search for packages that are required by the ones
+     that you have chosen to install and offer to select those packages
+     also.
+
+     For novices and gurus alike, this step can save your bacon.  It's
+     easy to forget to install a critical package.
+
+  5. Download and install the packages.  menu: Packages ->
+     Install/Remove Selected keyb: `x'
+
+   You can also install packages using a semi-manual interface:

 
 

-   If you want to know how many days have elapsed since the start of
-the year, or the number of days remaining in the year, type the `p d'
-command (`calendar-print-day-of-year').  This displays both of those
-numbers in the echo area.
+     M-x package-get-all <return>

 
 

-   To display a brief description of the calendar commands, type `?'
-(`describe-calendar-mode').  For a fuller description, type `C-h m'.
+   Enter the name of the package (e.g., `prog-modes'), and XEmacs will
+search for the latest version and install it and any packages that it
+depends upon.
+
+\1f
+File: xemacs.info,  Node: Which Packages,  Next: Removing Packages,  Prev: Automatically,  Up: Installing Packages
+
+Which Packages to Install:
+==========================

 
 

-   You can use `SPC' (`scroll-other-window') to scroll the other
-window.  This is handy when you display a list of holidays or diary
-entries in another window.
+   This is difficult to say. When in doubt install a package. If you
+administrate a big site it might be a good idea to just install
+everything. A good minimal set of packages for XEmacs-latin1 would be

 
 

-   If the calendar window text gets corrupted, type `C-c C-l'
-(`redraw-calendar') to redraw it.  (This can only happen if you use
-non-Calendar-mode editing commands.)
+   xemacs-base, xemacs-devel, c-support, cc-mode, debug, dired, efs,
+edit-utils, fsf-compat, mail-lib, net-utils, os-utils, prog-modes,
+text-modes, time

 
 

-   In Calendar mode, you can use `SPC' (`scroll-other-window') to
-scroll the other window.  This is handy when you display a list of
-holidays or diary entries in another window.
+   If you are using the XEmacs package tools, don't forget to do:

 
 

-   To exit from the calendar, type `q' (`exit-calendar').  This buries
-all buffers related to the calendar, selecting other buffers.  (If a
-frame contains a dedicated calendar window, exiting from the calendar
-iconifies that frame.)
+       Packages -> Add Required
+
+   To make sure you have everything that the packages you have chosen to
+install need.
+
+   See also *Note Available Packages:: for further descriptions of the
+individual packages.

 
 \1f
 
 \1f

-File: xemacs.info,  Node: LaTeX Calendar,  Next: Holidays,  Prev: General Calendar,  Up: Calendar/Diary
+File: xemacs.info,  Node: Removing Packages,  Prev: Which Packages,  Up: Installing Packages

 
 

-LaTeX Calendar
-==============
+Removing Packages:
+==================

 
 

-   The Calendar LaTeX commands produce a buffer of LaTeX code that
-prints as a calendar.  Depending on the command you use, the printed
-calendar covers the day, week, month or year that point is in.
+   Because the exact files and their locations contained in a package
+may change it is recommended to remove a package first before
+installing a new version. In order to facilitate removal each package
+contains an `pgkinfo/MANIFEST.pkgname' file which list all the files
+belonging to the package.

 
 

-`t m'
-     Generate a one-month calendar (`cal-tex-cursor-month').
+   No need to panic, you don't have to go through the
+`pkinfo/MANIFEST.pkgname' and manually delete the files.  Instead, use
+`M-x package-admin-delete-binary-package RET'.

 
 

-`t M'
-     Generate a sideways-printing one-month calendar
-     (`cal-tex-cursor-month-landscape').
+   Note that the interactive package tools included with XEmacs already
+do this for you.

 
 

-`t d'
-     Generate a one-day calendar (`cal-tex-cursor-day').
+\1f
+File: xemacs.info,  Node: Building Packages,  Next: Local.rules File,  Prev: Installing Packages,  Up: Packages

 
 

-`t w 1'
-     Generate a one-page calendar for one week (`cal-tex-cursor-week').
+Building Packages:
+==================

 
 

-`t w 2'
-     Generate a two-page calendar for one week (`cal-tex-cursor-week2').
+   Currently, source packages are only available via anonymous CVS.  See
+<http://cvs.xemacs.org/> for details of checking out the
+`xemacs-packages' module.

 
 

-`t w 3'
-     Generate an ISO-style calendar for one week
-     (`cal-tex-cursor-week-iso').
+Prerequisites for Building Source Packages
+------------------------------------------

 
 

-`t w 4'
-     Generate a calendar for one Monday-starting week
-     (`cal-tex-cursor-week-monday').
+`GNU cp'

 
 

-`t f w'
-     Generate a Filofax-style two-weeks-at-a-glance calendar
-     (`cal-tex-cursor-filofax-2week').
+`GNU ginstall'
+     (or a BSD compatible install program).

 
 

-`t f W'
-     Generate a Filofax-style one-week-at-a-glance calendar
-     (`cal-tex-cursor-filofax-week').
+`GNU make'
+     (3.75 or later preferred).

 
 

-`t y'
-     Generate a calendar for one year (`cal-tex-cursor-year').
+`makeinfo'
+     (1.68 from texinfo-3.11 or later required).

 
 

-`t Y'
-     Generate a sideways-printing calendar for one year
-     (`cal-tex-cursor-year-landscape').
+`GNU tar'
+     (or equivalent).

 
 

-`t f y'
-     Generate a Filofax-style calendar for one year
-     (`cal-tex-cursor-filofax-year').
+`GNU gzip'
+     (or equivalent).

 
 

-   Some of these commands print the calendar sideways (in "landscape
-mode"), so it can be wider than it is long.  Some of them use Filofax
-paper size (3.75in x 6.75in).  All of these commands accept a prefix
-argument which specifies how many days, weeks, months or years to print
-(starting always with the selected one).
+`A properly configured `Local.rules' file.'
+     *Note Local.rules File::.  And of course, XEmacs 21.0 or higher.

 
 

-   If the variable `cal-tex-holidays' is non-`nil' (the default), then
-the printed calendars show the holidays in `calendar-holidays'.  If the
-variable `cal-tex-diary' is non-`nil' (the default is `nil'), diary
-entries are included also (in weekly and monthly calendars only).
+What You Can Do With Source Packages
+------------------------------------

 
 

-\1f
-File: xemacs.info,  Node: Holidays,  Next: Sunrise/Sunset,  Prev: LaTeX Calendar,  Up: Calendar/Diary
+   The packages CVS sources are most useful for creating XEmacs package
+tarballs for installation into your own XEmacs installations or for
+distributing to others.

 
 

-Holidays
---------
+   Supported operations from `make' are:

 
 

-   The Emacs calendar knows about all major and many minor holidays,
-and can display them.
+`all'
+     Bytecompile all files, build and bytecompile byproduct files like
+     `auto-autoloads.el' and `custom-load.el'.  Create info version of
+     TeXinfo documentation if present.

 
 

-`h'
-     Display holidays for the selected date
-     (`calendar-cursor-holidays').
+`bindist'
+     Does a `make all' as well as create a binary package tarball in the
+     staging directory.

 
 

-`Button2 Holidays'
-     Display any holidays for the date you click on.
+`install'
+     Bytecompile all files, build and bytecompile byproduct files like
+     `auto-autoloads.el' and `custom-load.el'.  Create info version of
+     TeXinfo documentation if present.  And install everything into the
+     staging directory.

 
 

-`x'
-     Mark holidays in the calendar window (`mark-calendar-holidays').
+`srckit'
+     Usually aliased to `srckit-std'.  This does a `make distclean' and
+     creates a package source tarball in the staging directory.  This
+     is generally only of use for package maintainers.

 
 

-`u'
-     Unmark calendar window (`calendar-unmark').
-
-`a'
-     List all holidays for the displayed three months in another window
-     (`list-calendar-holidays').
-
-`M-x holidays'
-     List all holidays for three months around today's date in another
-     window.
-
-`M-x list-holidays'
-     List holidays in another window for a specified range of years.
-
-   To see if any holidays fall on a given date, position point on that
-date in the calendar window and use the `h' command.  Alternatively,
-click on that date with `Button2' and then choose `Holidays' from the
-menu that appears.  Either way, this displays the holidays for that
-date, in the echo area if they fit there, otherwise in a separate
-window.
-
-   To view the distribution of holidays for all the dates shown in the
-calendar, use the `x' command.  This displays the dates that are
-holidays in a different face (or places a `*' after these dates, if
-display with multiple faces is not available). The command applies both
-to the currently visible months and to other months that subsequently
-become visible by scrolling.  To turn marking off and erase the current
-marks, type `u', which also erases any diary marks (*note Diary::.).
-
-   To get even more detailed information, use the `a' command, which
-displays a separate buffer containing a list of all holidays in the
-current three-month range.  You can use <SPC> in the calendar window to
-scroll that list.
-
-   The command `M-x holidays' displays the list of holidays for the
-current month and the preceding and succeeding months; this works even
-if you don't have a calendar window.  If you want the list of holidays
-centered around a different month, use `C-u M-x holidays', which
-prompts for the month and year.
-
-   The holidays known to Emacs include United States holidays and the
-major Christian, Jewish, and Islamic holidays; also the solstices and
-equinoxes.
-
-   The command `M-x list-holidays' displays the list of holidays for a
-range of years.  This function asks you for the starting and stopping
-years, and allows you to choose all the holidays or one of several
-categories of holidays.  You can use this command even if you don't have
-a calendar window.
-
-   The dates used by Emacs for holidays are based on *current
-practice*, not historical fact.  Historically, for instance, the start
-of daylight savings time and even its existence have varied from year to
-year, but present United States law mandates that daylight savings time
-begins on the first Sunday in April.  When the daylight savings rules
-are set up for the United States, Emacs always uses the present
-definition, even though it is wrong for some prior years.
+`binkit'
+     May be aliased to `binkit-sourceonly', `binkit-sourceinfo',
+     `binkit-sourcedata', or `binkit-sourcedatainfo'. `sourceonly'
+     indicates there is nothing to install in a data directory or info
+     directory.  `sourceinfo' indicates that source and info files are
+     to be installed.  `sourcedata' indicates that source and etc
+     (data) files are to be installed.  `sourcedatainfo' indicates
+     source, etc (data), and info files are to be installed.  A few
+     packages have needs beyond the basic templates so this is not yet
+     complete.

 
 

-\1f
-File: xemacs.info,  Node: Sunrise/Sunset,  Next: Lunar Phases,  Prev: Holidays,  Up: Calendar/Diary
+`dist'
+     Runs the rules `srckit' followed by `binkit'.  This is primarily
+     of use by XEmacs maintainers producing files for distribution.

 
 

-Times of Sunrise and Sunset
----------------------------
+`clean'
+     Remove all built files except `auto-autoloads.el' and
+     `custom-load.el'.

 
 

-   Special calendar commands can tell you, to within a minute or two,
-the times of sunrise and sunset for any date.
-
-`S'
-     Display times of sunrise and sunset for the selected date
-     (`calendar-sunrise-sunset').
-
-`Button2 Sunrise/Sunset'
-     Display times of sunrise and sunset for the date you click on.
-
-`M-x sunrise-sunset'
-     Display times of sunrise and sunset for today's date.
-
-`C-u M-x sunrise-sunset'
-     Display times of sunrise and sunset for a specified date.
-
-   Within the calendar, to display the *local times* of sunrise and
-sunset in the echo area, move point to the date you want, and type `S'.
-Alternatively, click `Button2' on the date, then choose
-`Sunrise/Sunset' from the menu that appears.  The command `M-x
-sunrise-sunset' is available outside the calendar to display this
-information for today's date or a specified date.  To specify a date
-other than today, use `C-u M-x sunrise-sunset', which prompts for the
-year, month, and day.
-
-   You can display the times of sunrise and sunset for any location and
-any date with `C-u C-u M-x sunrise-sunset'.  This asks you for a
-longitude, latitude, number of minutes difference from Coordinated
-Universal Time, and date, and then tells you the times of sunrise and
-sunset for that location on that date.
-
-   Because the times of sunrise and sunset depend on the location on
-earth, you need to tell Emacs your latitude, longitude, and location
-name before using these commands.  Here is an example of what to set:
-
-     (setq calendar-latitude 40.1)
-     (setq calendar-longitude -88.2)
-     (setq calendar-location-name "Urbana, IL")
-
-Use one decimal place in the values of `calendar-latitude' and
-`calendar-longitude'.
-
-   Your time zone also affects the local time of sunrise and sunset.
-Emacs usually gets time zone information from the operating system, but
-if these values are not what you want (or if the operating system does
-not supply them), you must set them yourself.  Here is an example:
-
-     (setq calendar-time-zone -360)
-     (setq calendar-standard-time-zone-name "CST")
-     (setq calendar-daylight-time-zone-name "CDT")
-
-The value of `calendar-time-zone' is the number of minutes difference
-between your local standard time and Coordinated Universal Time
-(Greenwich time).  The values of `calendar-standard-time-zone-name' and
-`calendar-daylight-time-zone-name' are the abbreviations used in your
-time zone.  Emacs displays the times of sunrise and sunset *corrected
-for daylight savings time*.  *Note Daylight Savings::, for how daylight
-savings time is determined.
-
-   As a user, you might find it convenient to set the calendar location
-variables for your usual physical location in your `.emacs' file.  And
-when you install Emacs on a machine, you can create a `default.el' file
-which sets them properly for the typical location of most users of that
-machine.  *Note Init File::.
+`distclean'
+     Remove all created files.

 
 \1f
 
 \1f

-File: xemacs.info,  Node: Lunar Phases,  Next: Other Calendars,  Prev: Sunrise/Sunset,  Up: Calendar/Diary
+File: xemacs.info,  Node: Local.rules File,  Next: Creating Packages,  Prev: Building Packages,  Up: Packages

 
 

-Phases of the Moon
-------------------
+The Local.rules File:
+=====================

 
 

-   These calendar commands display the dates and times of the phases of
-the moon (new moon, first quarter, full moon, last quarter).  This
-feature is useful for debugging problems that "depend on the phase of
-the moon."
+   This file is used when building and installing packages from source.
+In the top level of the CVS module, `xemacs-packages', contains the
+file, `Local.rules.template'.  Simply copy that to `Local.rules' and
+edit it to suit your needs.

 
 

-`M'
-     Display the dates and times for all the quarters of the moon for
-     the three-month period shown (`calendar-phases-of-moon').
+   These are the variables in 'Local.rules' that you will need to
+address.

 
 

-`M-x phases-of-moon'
-     Display dates and times of the quarters of the moon for three
-     months around today's date.
+SYMLINK =
+     Set this to 't' if you want to do a "run in place".  Setting this
+     doesn't work well with 'make bindist'

 
 

-   Within the calendar, use the `M' command to display a separate
-buffer of the phases of the moon for the current three-month range.  The
-dates and times listed are accurate to within a few minutes.
+XEMACS_PACKAGES =
+     This is where you set the normal packages that you want to
+     install. eg:
+                XEMACS_PACKAGES = libs/xemacs-base comm/bbdb

 
 

-   Outside the calendar, use the command `M-x phases-of-moon' to
-display the list of the phases of the moon for the current month and the
-preceding and succeeding months.  For information about a different
-month, use `C-u M-x phases-of-moon', which prompts for the month and
-year.
+XEMACS_STAGING = ${XEMACS_PACKAGES_BASE}/../PACKAGES
+     Set this to where you want normal packages to be installed to.

 
 

-   The dates and times given for the phases of the moon are given in
-local time (corrected for daylight savings, when appropriate); but if
-the variable `calendar-time-zone' is void, Coordinated Universal Time
-(the Greenwich time zone) is used.  *Note Daylight Savings::.
+PACKAGE_INDEX = PACKAGE-INDEX
+     If you want the package-index file to have a different name,
+     change this.

 
 

-\1f
-File: xemacs.info,  Node: Other Calendars,  Next: Calendar Systems,  Prev: Lunar Phases,  Up: Calendar/Diary
+BUILD_WITHOUT_MULE =
+     Building from CVS defaults to building the Mule packages.  Set
+     this to 't' if you don't want/have Mule

 
 

-Conversion To and From Other Calendars
---------------------------------------
+MULE_PACKAGES =
+     Same as for 'XEMACS_PACKAGES' except you list the Mule packages
+     you want to install here. eg:
+                MULE_PACKAGES = mule/mule-base mule/skk

 
 

-   The Emacs calendar displayed is *always* the Gregorian calendar,
-sometimes called the "new style" calendar, which is used in most of the
-world today.  However, this calendar did not exist before the sixteenth
-century and was not widely used before the eighteenth century; it did
-not fully displace the Julian calendar and gain universal acceptance
-until the early twentieth century.  The Emacs calendar can display any
-month since January, year 1 of the current era, but the calendar
-displayed is the Gregorian, even for a date at which the Gregorian
-calendar did not exist.
+MULE_STAGING = ${XEMACS_PACKAGES_BASE}/../MULE-PACKAGES
+     Set this to where you want Mule packages installed to.  Note:
+     'make bindist' does not use this variable.

 
 

-   While Emacs cannot display other calendars, it can convert dates to
-and from several other calendars.
+XEMACS = XEMACS
+     If your XEmacs isn't in your path, change this.

 
 

-* Menu:
+XEMACS_NATIVE_NT =
+     Set this to 't' if you are building on WinNT.
+
+INSTALL = INSTALL -C
+     The path to your BSD compatible install program.

 
 

-* Calendar Systems::      The calendars Emacs understands
-                            (aside from Gregorian).
-* To Other Calendar::     Converting the selected date to various calendars.
-* From Other Calendar::   Moving to a date specified in another calendar.
-* Mayan Calendar::        Moving to a date specified in a Mayan calendar.
+TAR = TAR
+     The path to your tar program

 
 

-   If you are interested in these calendars, you can convert dates one
-at a time.  Put point on the desired date of the Gregorian calendar and
-press the appropriate keys.  The `p' is a mnemonic for "print" since
-Emacs "prints' the equivalent date in the echo area.
+BZIP2 =
+     If you want bzip2 tarballs, set this.
+
+MAKEINFO = MAKEINFO
+     The path to your makeinfo program

 
 \1f
 
 \1f

-File: xemacs.info,  Node: Calendar Systems,  Next: To Other Calendar,  Prev: Other Calendars,  Up: Other Calendars
+File: xemacs.info,  Node: Creating Packages,  Next: Available Packages,  Prev: Local.rules File,  Up: Packages

 
 

-Supported Calendar Systems
-==========================
+Creating Packages:
+==================

 
 

-   The ISO commercial calendar is used largely in Europe.
-
-   The Julian calendar, named after Julius Caesar, was the one used in
-Europe throughout medieval times, and in many countries up until the
-nineteenth century.
-
-   Astronomers use a simple counting of days elapsed since noon, Monday,
-January 1, 4713 B.C. on the Julian calendar.  The number of days elapsed
-is called the *Julian day number* or the *Astronomical day number*.
-
-   The Hebrew calendar is used by tradition in the Jewish religion.  The
-Emacs calendar program uses the Hebrew calendar to determine the dates
-of Jewish holidays.  Hebrew calendar dates begin and end at sunset.
-
-   The Islamic calendar is used in many predominantly Islamic countries.
-Emacs uses it to determine the dates of Islamic holidays.  There is no
-universal agreement in the Islamic world about the calendar; Emacs uses
-a widely accepted version, but the precise dates of Islamic holidays
-often depend on proclamation by religious authorities, not on
-calculations.  As a consequence, the actual dates of observance can vary
-slightly from the dates computed by Emacs.  Islamic calendar dates begin
-and end at sunset.
-
-   The French Revolutionary calendar was created by the Jacobins after
-the 1789 revolution, to represent a more secular and nature-based view
-of the annual cycle, and to install a 10-day week in a rationalization
-measure similar to the metric system.  The French government officially
-abandoned this calendar at the end of 1805.
-
-   The Maya of Central America used three separate, overlapping calendar
-systems, the *long count*, the *tzolkin*, and the *haab*.  Emacs knows
-about all three of these calendars.  Experts dispute the exact
-correlation between the Mayan calendar and our calendar; Emacs uses the
-Goodman-Martinez-Thompson correlation in its calculations.
-
-   The Copts use a calendar based on the ancient Egyptian solar
-calendar.  Their calendar consists of twelve 30-day months followed by
-an extra five-day period.  Once every fourth year they add a leap day
-to this extra period to make it six days.  The Ethiopic calendar is
-identical in structure, but has different year numbers and month names.
-
-   The Persians use a solar calendar based on a design of Omar Khayyam.
-Their calendar consists of twelve months of which the first six have 31
-days, the next five have 30 days, and the last has 29 in ordinary years
-and 30 in leap years.  Leap years occur in a complicated pattern every
-four or five years.
-
-   The Chinese calendar is a complicated system of lunar months arranged
-into solar years.  The years go in cycles of sixty, each year containing
-either twelve months in an ordinary year or thirteen months in a leap
-year; each month has either 29 or 30 days.  Years, ordinary months, and
-days are named by combining one of ten "celestial stems" with one of
-twelve "terrestrial branches" for a total of sixty names that are
-repeated in a cycle of sixty.
+   Creating a package from an existing Lisp library is not very
+difficult.
+
+   In addition to the Lisp libraries themselves, you need a
+`package-info.in' file and a simple `Makefile'.  The rest is done by
+`XEmacs.rules', part of the packaging system infrastructure.
+
+   `package-info.in' contains a single Lisp form like this:
+
+     (name                               ; your package's name
+       (standards-version 1.1
+        version VERSION
+        author-version AUTHOR_VERSION
+        date DATE
+        build-date BUILD_DATE
+        maintainer MAINTAINER
+        distribution xemacs              ; change to "mule" if MULE is needed
+        priority high
+        category CATEGORY
+        dump nil
+        description "description"        ; a one-line description string
+        filename FILENAME
+        md5sum MD5SUM
+        size SIZE
+        provides (feature1 feature2)     ; one for every `provides' form
+        requires (REQUIRES)
+        type regular
+     ))
+
+   You must fill in the four commented lines.  The value of `name' is
+the name of your package as an unquoted symbol.  Normally it is the name
+of the main Lisp file or principal feature provided.  The allowed values
+for distribution are `xemacs' and `mule'.  Write them as unquoted
+symbols.  The `description' is a quoted Lisp string; use the usual
+conventions.  The value for `provides' is a list of feature symbols
+(written unquoted).  All of the features provided by libraries in your
+package should be elements of this list.  Implementing an automatic
+method for generating the `provides' line is desirable, but as yet
+undone.
+
+   The variables in upper-case are references to variables set in the
+`Makefile' or automatically generated.  Do not change them; they are
+automatically filled in by the build process.
+
+   The remaining lines refer to implementation constants
+(`standards-version'), or features that are unimplemented or have been
+removed (`priority' and `dump').  The `type' line is not normally
+relevant to external maintainers; the alternate value is `single-file',
+which refers to packages consed up out of a number of single-file
+libraries that are more or less thematically related.  An example is
+`prog-modes'.  Single-file packages are basically for administrative
+convenience, and new packages should generally be created as regular
+packages.
+
+   The `Makefile' is quite stylized.  The idea is similar to an
+`Imakefile' or an `automake' file: the complexity is hidden in generic
+rules files, in this case the `XEmacs.rules' include file in the top
+directory of the packages hierarchy.  Although a number of facilities
+are available for complex libraries, most simple packages' `Makefile's
+contain a copyright notice, a few variable definitions, an include for
+`XEmacs.rules', and a couple of standard targets.
+
+   The first few `make' variables defined are `VERSION',
+`AUTHOR_VERSION', `MAINTAINER', `PACKAGE', `PKG_TYPE', `REQUIRES', and
+`CATEGORY'.  All but one were described in the description of
+`package-info.in'.  The last is an admistrative grouping.  Current
+categories include `comm', `games', `libs', `mule', `oa', `os', `prog',
+and `wp'.  *Note Available Packages::, for a list of categories.
+
+   Next, define the variable `ELCS'.  This contains the list of the
+byte-compiled Lisp files used by the package.  These files and their
+`.el' versions will be included in the binary package.  If there are
+other files (such as extra Lisp sources or an upstream `Makefile') that
+are normally placed in the installed Lisp directory, but not
+byte-compiled, they can be listed as the value of `EXTRA_SOURCES'.
+
+   The include is simply
+     include ../../XEmacs.rules
+
+   The standard targets follow.  These are
+
+     all:: $(ELCS) auto-autoloads.elc
+     
+     srckit: srckit-alias
+     
+     binkit: binkit-alias
+
+   Other targets (such as Texinfo sources) may need to be added as
+dependencies for the `all' target.  Dependencies for `srckit' and
+`binkit' (that is, values for SRCKIT-ALIAS and BINKIT-ALIAS) are
+defined in `XEmacs.rules'.  The most useful of these values are given
+in the following table.
+
+SRCKIT-ALIAS
+     Usually set to `srckit-std'.
+
+BINKIT-ALIAS
+     May be set to `binkit-sourceonly', `binkit-sourceinfo',
+     `binkit-sourcedata', or `binkit-sourcedatainfo'.  `sourceonly'
+     indicates there is nothing to install in a data directory or info
+     directory.  `sourceinfo' indicates that source and info files are
+     to be installed.  `sourcedata' indicates that source and etc
+     (data) files are to be installed.  `sourcedatainfo' indicates
+     source, etc (data), and info files are to be installed.
+
+   Data files include things like pixmaps for a package-specific
+toolbar, and are normally installed in `etc/PACKAGE_NAME'.  A few
+packages have needs beyond the basic templates.  See `XEmacs.rules' or
+a future revision of this manual for details.