-File: xemacs.info, Node: Format of Diary File, Next: Date Formats, Prev: Diary Commands, Up: Diary
-
-The Diary File
---------------
-
- Your "diary file" is a file that records events associated with
-particular dates. The name of the diary file is specified by the
-variable `diary-file'; `~/diary' is the default. The `calendar'
-utility program supports a subset of the format allowed by the Emacs
-diary facilities, so you can use that utility to view the diary file,
-with reasonable results aside from the entries it cannot understand.
-
- Each entry in the diary file describes one event and consists of one
-or more lines. An entry always begins with a date specification at the
-left margin. The rest of the entry is simply text to describe the
-event. If the entry has more than one line, then the lines after the
-first must begin with whitespace to indicate they continue a previous
-entry. Lines that do not begin with valid dates and do not continue a
-preceding entry are ignored.
-
- You can inhibit the marking of certain diary entries in the calendar
-window; to do this, insert an ampersand (`&') at the beginning of the
-entry, before the date. This has no effect on display of the entry in
-the diary window; it affects only marks on dates in the calendar
-window. Nonmarking entries are especially useful for generic entries
-that would otherwise mark many different dates.
-
- If the first line of a diary entry consists only of the date or day
-name with no following blanks or punctuation, then the diary window
-display doesn't include that line; only the continuation lines appear.
-For example, this entry:
-
- 02/11/1989
- Bill B. visits Princeton today
- 2pm Cognitive Studies Committee meeting
- 2:30-5:30 Liz at Lawrenceville
- 4:00pm Dentist appt
- 7:30pm Dinner at George's
- 8:00-10:00pm concert
-
-appears in the diary window without the date line at the beginning.
-This style of entry looks neater when you display just a single day's
-entries, but can cause confusion if you ask for more than one day's
-entries.
-
- You can edit the diary entries as they appear in the window, but it
-is important to remember that the buffer displayed contains the *entire*
-diary file, with portions of it concealed from view. This means, for
-instance, that the `C-f' (`forward-char') command can put point at what
-appears to be the end of the line, but what is in reality the middle of
-some concealed line.
-
- *Be careful when editing the diary entries!* Inserting additional
-lines or adding/deleting characters in the middle of a visible line
-cannot cause problems, but editing at the end of a line may not do what
-you expect. Deleting a line may delete other invisible entries that
-follow it. Before editing the diary, it is best to display the entire
-file with `s' (`show-all-diary-entries').
+File: xemacs.info, Node: Mail Headers, Next: Mail Mode, Prev: Mail Format, Up: Sending Mail
+
+Mail Header Fields
+==================
+
+ There are several header fields you can use in the `*mail*' buffer.
+Each header field starts with a field name at the beginning of a line,
+terminated by a colon. It does not matter whether you use upper or
+lower case in the field name. After the colon and optional whitespace
+comes the contents of the field.
+
+`To'
+ This field contains the mailing addresses of the message.
+
+`Subject'
+ The contents of the `Subject' field should be a piece of text that
+ says what the message is about. Subject fields are useful because
+ most mail-reading programs can provide a summary of messages,
+ listing the subject of each message but not its text.
+
+`CC'
+ This field contains additional mailing addresses to send the
+ message to, but whose readers should not regard the message as
+ addressed to them.
+
+`BCC'
+ This field contains additional mailing addresses to send the
+ message to, but which should not appear in the header of the
+ message actually sent.
+
+`FCC'
+ This field contains the name of one file (in Unix mail file
+ format) to which a copy of the message should be appended when the
+ message is sent.
+
+`From'
+ Use the `From' field to say who you are, when the account you are
+ using to send the mail is not your own. The contents of the
+ `From' field should be a valid mailing address, since replies will
+ normally go there.
+
+`Reply-To'
+ Use the `Reply-To' field to direct replies to a different address,
+ not your own. `From' and `Reply-To' have the same effect on where
+ replies go, but they convey a different meaning to the person who
+ reads the message.
+
+`In-Reply-To'
+ This field contains a piece of text describing a message you are
+ replying to. Some mail systems can use the information to
+ correlate related pieces of mail. This field is normally filled
+ in by your mail handling package when you are replying to a
+ message and you never need to think about it.
+
+The `To', `CC', `BCC' and `FCC' fields can appear any number of times,
+to specify many places to send the message.
+
+The `To', `CC', and `BCC', fields can have continuation lines. All the
+lines starting with whitespace, following the line on which the field
+starts, are considered part of the field. For example,
+
+ To: foo@here, this@there,
+ me@gnu.cambridge.mass.usa.earth.spiral3281
+
+If you have a `~/.mailrc' file, Emacs scans it for mail aliases the
+first time you try to send mail in an Emacs session. Emacs expands
+aliases found in the `To', `CC', and `BCC' fields where appropriate.
+You can set the variable `mail-abbrev-mailrc-file' to the name of the
+file with mail aliases. If `nil', `~/.mailrc' is used.
+
+ Your `.mailrc' file ensures that word-abbrevs are defined for each
+of your mail aliases when point is in a `To', `CC', `BCC', or `From'
+field. The aliases are defined in your `.mailrc' file or in a file
+specified by the MAILRC environment variable if it exists. Your mail
+aliases expand any time you type a word-delimiter at the end of an
+abbreviation.
+
+ In this version of Emacs, what you see is what you get: in contrast
+to some other versions, no abbreviations are expanded after you have
+sent the mail. This means you don't suffer the annoyance of having the
+system do things behind your back--if the system rewrites an address
+you typed, you know it immediately, instead of after the mail has been
+sent and it's too late to do anything about it. For example, you will
+never again be in trouble because you forgot to delete an old alias
+from your `.mailrc' and a new local user is given a userid which
+conflicts with one of your aliases.
+
+ Your mail alias abbrevs are in effect only when point is in an
+appropriate header field. The mail aliases will not expand in the body
+of the message, or in other header fields. The default mode-specific
+abbrev table `mail-mode-abbrev-table' is used instead if defined. That
+means if you have been using mail-mode specific abbrevs, this code will
+not adversely affect you. You can control which header fields the
+abbrevs are used in by changing the variable `mail-abbrev-mode-regexp'.
+
+ If auto-fill mode is on, abbrevs wrap at commas instead of at word
+boundaries, and header continuation lines will be properly indented.
+
+ You can also insert a mail alias with
+`mail-interactive-insert-alias'. This function, which is bound to `C-c
+C-a', prompts you for an alias (with completion) and inserts its
+expansion at point.
+
+ In this version of Emacs, it is possible to have lines like the
+following in your `.mailrc' file:
+
+ alias someone "John Doe <doe@quux.com>"
+
+ That is, if you want an address to have embedded spaces, simply
+surround it with double-quotes. The quotes are necessary because the
+format of the `.mailrc' file uses spaces as address delimiters.
+
+ Aliases in the `.mailrc' file may be nested. For example, assume you
+define aliases like:
+ alias group1 fred ethel
+ alias group2 larry curly moe
+ alias everybody group1 group2
+
+ When you now type `everybody' on the `To' line, it will expand to:
+ fred, ethyl, larry, curly, moe
+
+ Aliases may contain forward references; the alias of `everybody' in
+the example above can precede the aliases of `group1' and `group2'.
+
+ In this version of Emacs, you can use the `source' `.mailrc' command
+for reading aliases from some other file as well.
+
+ Aliases may contain hyphens, as in `"alias foo-bar foo@bar"', even
+though word-abbrevs normally cannot contain hyphens.
+
+ To read in the contents of another `.mailrc'-type file from Emacs,
+use the command `M-x merge-mail-aliases'. The `rebuild-mail-aliases'
+command is similar, but deletes existing aliases first.
+
+ If you want multiple addresses separated by a string other than `,'
+(a comma), then set the variable `mail-alias-separator-string' to it.
+This has to be a comma bracketed by whitespace if you want any kind of
+reasonable behavior.
+
+ If the variable `mail-archive-file-name' is non-`nil', it should be
+a string naming a file. Each time you start to edit a message to send,
+an `FCC' field is entered for that file. Unless you remove the `FCC'
+field, every message is written into that file when it is sent.
+
+\1f
+File: xemacs.info, Node: Mail Mode, Prev: Mail Headers, Up: Sending Mail
+
+Mail Mode
+=========
+
+ The major mode used in the `*mail*' buffer is Mail mode. Mail mode
+is similar to Text mode, but several commands are provided on the `C-c'
+prefix. These commands all deal specifically with editing or sending
+the message.
+
+`C-c C-s'
+ Send the message, and leave the `*mail*' buffer selected
+ (`mail-send').
+
+`C-c C-c'
+ Send the message, and select some other buffer
+ (`mail-send-and-exit').
+
+`C-c C-f C-t'
+ Move to the `To' header field, creating one if there is none
+ (`mail-to').
+
+`C-c C-f C-s'
+ Move to the `Subject' header field, creating one if there is none
+ (`mail-subject').
+
+`C-c C-f C-c'
+ Move to the `CC' header field, creating one if there is none
+ (`mail-cc').
+
+`C-c C-w'
+ Insert the file `~/.signature' at the end of the message text
+ (`mail-signature').
+
+`C-c C-y'
+ Yank the selected message (`mail-yank-original').
+
+`C-c C-q'
+ Fill all paragraphs of yanked old messages, each individually
+ (`mail-fill-yanked-message').
+
+`<button3>'
+ Pops up a menu of useful mail-mode commands.
+
+ There are two ways to send a message. `C-c C-c'
+(`mail-send-and-exit') is the usual way to send the message. It sends
+the message and then deletes the window (if there is another window) or
+switches to another buffer. It puts the `*mail*' buffer at the lowest
+priority for automatic reselection, since you are finished with using
+it. `C-c C-s' (`mail-send') sends the message and marks the `*mail*'
+buffer unmodified, but leaves that buffer selected so that you can
+modify the message (perhaps with new recipients) and send it again.
+
+ Mail mode provides some other special commands that are useful for
+editing the headers and text of the message before you send it. There
+are three commands defined to move point to particular header fields,
+all based on the prefix `C-c C-f' (`C-f' is for "field"). They are
+`C-c C-f C-t' (`mail-to') to move to the `To' field, `C-c C-f C-s'
+(`mail-subject') for the `Subject' field, and `C-c C-f C-c' (`mail-cc')
+for the `CC' field. These fields have special motion commands because
+they are edited most frequently.
+
+ `C-c C-w' (`mail-signature') adds a standard piece of text at the
+end of the message to say more about who you are. The text comes from
+the file `.signature' in your home directory.
+
+ When you use an Rmail command to send mail from the Rmail mail
+reader, you can use `C-c C-y' `mail-yank-original' inside the `*mail*'
+buffer to insert the text of the message you are replying to. Normally
+Rmail indents each line of that message four spaces and eliminates most
+header fields. A numeric argument specifies the number of spaces to
+indent. An argument of just `C-u' says not to indent at all and not to
+eliminate anything. `C-c C-y' always uses the current message from the
+`RMAIL' buffer, so you can insert several old messages by selecting one
+in `RMAIL', switching to `*mail*' and yanking it, then switching back
+to `RMAIL' to select another.
+
+ After using `C-c C-y', you can use the command `C-c C-q'
+(`mail-fill-yanked-message') to fill the paragraphs of the yanked old
+message or messages. One use of `C-c C-q' fills all such paragraphs,
+each one separately.
+
+ Clicking the right mouse button in a mail buffer pops up a menu of
+the above commands, for easy access.
+
+ Turning on Mail mode (which `C-x m' does automatically) calls the
+value of `text-mode-hook', if it is not void or `nil', and then calls
+the value of `mail-mode-hook' if that is not void or `nil'.
+
+\1f
+File: xemacs.info, Node: Reading Mail, Next: Calendar/Diary, Prev: Sending Mail, Up: Top
+
+Reading Mail
+************
+
+ XEmacs provides three separate mail-reading packages. Each one
+comes with its own manual, which is included standard with the XEmacs
+distribution.
+
+ The recommended mail-reading package for new users is VM. VM works
+with standard Unix-mail-format folders and was designed as a replacement
+for the older Rmail.
+
+ XEmacs also provides a sophisticated and comfortable front-end to the
+MH mail-processing system, called `mh-e'. Unlike in other mail
+programs, folders in MH are stored as file-system directories, with
+each message occupying one (numbered) file. This facilitates working
+with mail using shell commands, and many other features of MH are also
+designed to integrate well with the shell and with shell scripts. Keep
+in mind, however, that in order to use mh-e you must have the MH
+mail-processing system installed on your computer.
+
+ Finally, XEmacs provides the Rmail package. Rmail is (currently) the
+only mail reading package distributed with FSF GNU Emacs, and is
+powerful in its own right. However, it stores mail folders in a special
+format called `Babyl', that is incompatible with all other
+frequently-used mail programs. A utility program is provided for
+converting Babyl folders to standard Unix-mail format; however, unless
+you already have mail in Babyl-format folders, you should consider
+using VM or mh-e instead. (If at times you have to use FSF Emacs, it is
+not hard to obtain and install VM for that editor.)
+
+\1f
+File: xemacs.info, Node: Calendar/Diary, Next: Sorting, Prev: Reading Mail, Up: Top
+
+Calendar Mode and the Diary
+===========================
+
+ Emacs provides the functions of a desk calendar, with a diary of
+planned or past events. To enter the calendar, type `M-x calendar';
+this displays a three-month calendar centered on the current month, with
+point on the current date. With a numeric argument, as in `C-u M-x
+calendar', it prompts you for the month and year to be the center of the
+three-month calendar. The calendar uses its own buffer, whose major
+mode is Calendar mode.
+
+ `Button2' in the calendar brings up a menu of operations on a
+particular date; `Buttons3' brings up a menu of commonly used calendar
+features that are independent of any particular date. To exit the
+calendar, type `q'. *Note Customizing the Calendar and Diary:
+(lispref)Calendar, for customization information about the calendar and
+diary.
+
+* Menu:
+
+* Calendar Motion:: Moving through the calendar; selecting a date.
+* Scroll Calendar:: Bringing earlier or later months onto the screen.
+* Mark and Region:: Remembering dates, the mark ring.
+* General Calendar:: Exiting or recomputing the calendar.
+* LaTeX Calendar:: Print a calendar using LaTeX.
+* Holidays:: Displaying dates of holidays.
+* Sunrise/Sunset:: Displaying local times of sunrise and sunset.
+* Lunar Phases:: Displaying phases of the moon.
+* Other Calendars:: Converting dates to other calendar systems.
+* Diary:: Displaying events from your diary.
+* Calendar Customization:: Altering the behavior of the features above.
projects / chise / xemacs-chise.git / blobdiff