(JX2-726C): Use `ideographic-strokes' instead of `japanese-strokes'.

[chise/xemacs-chise.git-] / info / xemacs.info-9

diff --git a/info/xemacs.info-9 b/info/xemacs.info-9
index 6f85972..fd04303 100644 (file)
--- a/info/xemacs.info-9
+++ b/info/xemacs.info-9
@@ -30,6 +30,104 @@ versions, except that the sections entitled "The GNU Manifesto",
 translation approved by the author instead of in the original English.
 
 \1f
 translation approved by the author instead of in the original English.
 
 \1f

+File: xemacs.info,  Node: Other Window,  Next: Pop Up Window,  Prev: Split Window,  Up: Windows
+
+Using Other Windows
+===================
+
+`C-x o'
+     Select another window (`other-window').  That is the letter `o',
+     not zero.
+
+`M-C-v'
+     Scroll the next window (`scroll-other-window').
+
+`M-x compare-windows'
+     Find the next place where the text in the selected window does not
+     match the text in the next window.
+
+`M-x other-window-any-frame N'
+     Select the Nth different window on any frame.
+
+   To select a different window, use `C-x o' (`other-window').  That is
+an `o', for `other', not a zero.  When there are more than two windows,
+the command moves through all the windows in a cyclic order, generally
+top to bottom and left to right.  From the rightmost and bottommost
+window, it goes back to the one at the upper left corner.  A numeric
+argument, N, moves several steps in the cyclic order of windows. A
+negative numeric argument moves around the cycle in the opposite order.
+If the optional second argument WHICH-FRAMES is non-`nil', the
+function cycles through all frames.  When the minibuffer is active, the
+minibuffer is the last window in the cycle; you can switch from the
+minibuffer window to one of the other windows, and later switch back
+and finish supplying the minibuffer argument that is requested.  *Note
+Minibuffer Edit::.
+
+   The command `M-x other-window-any-frame' also selects the window N
+steps away in the cyclic order.  However, unlike `other-window', this
+command selects a window on the next or previous frame instead of
+wrapping around to the top or bottom of the current frame, when there
+are no more windows.
+
+   The usual scrolling commands (*note Display::) apply to the selected
+window only.  `M-C-v' (`scroll-other-window') scrolls the window that
+`C-x o' would select.  Like `C-v', it takes positive and negative
+arguments.
+
+   The command `M-x compare-windows' compares the text in the current
+window with the text in the next window.  Comparison starts at point in
+each window.  Point moves forward in each window, a character at a time,
+until the next set of characters in the two windows are different.
+Then the command is finished.
+
+   A prefix argument IGNORE-WHITESPACE means ignore changes in
+whitespace.  The variable `compare-windows-whitespace' controls how
+whitespace is skipped.
+
+   If `compare-ignore-case' is non-`nil', changes in case are also
+ignored.
+
+\1f
+File: xemacs.info,  Node: Pop Up Window,  Next: Change Window,  Prev: Other Window,  Up: Windows
+
+Displaying in Another Window
+============================
+
+   `C-x 4' is a prefix key for commands that select another window
+(splitting the window if there is only one) and select a buffer in that
+window.  Different `C-x 4' commands have different ways of finding the
+buffer to select.
+
+`C-x 4 b BUFNAME <RET>'
+     Select buffer BUFNAME in another window.  This runs
+     `switch-to-buffer-other-window'.
+
+`C-x 4 f FILENAME <RET>'
+     Visit file FILENAME and select its buffer in another window.  This
+     runs `find-file-other-window'.  *Note Visiting::.
+
+`C-x 4 d DIRECTORY <RET>'
+     Select a Dired buffer for directory DIRECTORY in another window.
+     This runs `dired-other-window'.  *Note Dired::.
+
+`C-x 4 m'
+     Start composing a mail message in another window.  This runs
+     `mail-other-window', and its same-window version is `C-x m' (*note
+     Sending Mail::).
+
+`C-x 4 .'
+     Find a tag in the current tag table in another window.  This runs
+     `find-tag-other-window', the multiple-window variant of `M-.'
+     (*note Tags::).
+
+   If the variable `display-buffer-function' is non-`nil', its value is
+the function to call to handle `display-buffer'. It receives two
+arguments, the buffer and a flag that if non-`nil' means that the
+currently selected window is not acceptable. Commands such as
+`switch-to-buffer-other-window' and `find-file-other-window' work using
+this function.
+
+\1f

 File: xemacs.info,  Node: Change Window,  Prev: Pop Up Window,  Up: Windows
 
 Deleting and Rearranging Windows
 File: xemacs.info,  Node: Change Window,  Prev: Pop Up Window,  Up: Windows
 
 Deleting and Rearranging Windows

@@ -113,7 +211,7 @@ world scripts, including Latin script, as well as Arabic script,
 Simplified Chinese script (for mainland of China), Traditional Chinese
 script (for Taiwan and Hong-Kong), Greek script, Hebrew script, IPA
 symbols, Japanese scripts (Hiragana, Katakana and Kanji), Korean scripts
 Simplified Chinese script (for mainland of China), Traditional Chinese
 script (for Taiwan and Hong-Kong), Greek script, Hebrew script, IPA
 symbols, Japanese scripts (Hiragana, Katakana and Kanji), Korean scripts

-(Hangul and Hanja) and Cyrillic script (for Beylorussian, Bulgarian,
+(Hangul and Hanja) and Cyrillic script (for Byelorussian, Bulgarian,

 Russian, Serbian and Ukrainian).  These features have been merged from
 the modified version of Emacs known as MULE (for "MULti-lingual
 Enhancement to GNU Emacs").
 Russian, Serbian and Ukrainian).  These features have been merged from
 the modified version of Emacs known as MULE (for "MULti-lingual
 Enhancement to GNU Emacs").

@@ -1050,81 +1148,3 @@ the 1/4 inch streamer cartridges uses QIC-11, 8000 bpi, 4-track
 serpentine recording for the SUN.  Also, SystemV tapes can be written
 in cpio format, blocked 5120 bytes, ASCII headers.
 
 serpentine recording for the SUN.  Also, SystemV tapes can be written
 in cpio format, blocked 5120 bytes, ASCII headers.
 

-\1f
-File: xemacs.info,  Node: TeX Editing,  Next: TeX Print,  Prev: TeX Mode,  Up: TeX Mode
-
-TeX Editing Commands
-....................
-
-   Here are the special commands provided in TeX mode for editing the
-text of the file.
-
-`"'
-     Insert, according to context, either ```' or `"' or `'''
-     (`TeX-insert-quote').
-
-`<LFD>'
-     Insert a paragraph break (two newlines) and check the previous
-     paragraph for unbalanced braces or dollar signs (`tex-terminate-
-     paragraph').
-
-`M-x validate-tex-buffer'
-     Check each paragraph in the buffer for unbalanced braces or dollar
-     signs.
-
-`C-c {'
-     Insert `{}' and position point between them (`tex-insert-braces').
-
-`C-c }'
-     Move forward past the next unmatched close brace (`up-list').
-
-`C-c C-e'
-     Close a block for LaTeX (`tex-close-latex-block').
-
-   In TeX, the character `"' is not normally used; you use ```' to
-start a quotation and `''' to end one.  TeX mode defines the key `"' to
-insert ```' after whitespace or an open brace, `"' after a backslash,
-or `''' otherwise.  This is done by the command `tex-insert-quote'.  If
-you need the character `"' itself in unusual contexts, use `C-q' to
-insert it.  Also, `"' with a numeric argument always inserts that
-number of `"' characters.
-
-   In TeX mode, `$' has a special syntax code which attempts to
-understand the way TeX math mode delimiters match.  When you insert a
-`$' that is meant to exit math mode, the position of the matching `$'
-that entered math mode is displayed for a second.  This is the same
-feature that displays the open brace that matches a close brace that is
-inserted.  However, there is no way to tell whether a `$' enters math
-mode or leaves it; so when you insert a `$' that enters math mode, the
-previous `$' position is shown as if it were a match, even though they
-are actually unrelated.
-
-   If you prefer to keep braces balanced at all times, you can use `C-c
-{' (`tex-insert-braces') to insert a pair of braces.  It leaves point
-between the two braces so you can insert the text that belongs inside.
-Afterward, use the command `C-c }' (`up-list') to move forward past the
-close brace.
-
-   There are two commands for checking the matching of braces.  <LFD>
-(`tex-terminate-paragraph') checks the paragraph before point, and
-inserts two newlines to start a new paragraph.  It prints a message in
-the echo area if any mismatch is found.  `M-x validate-tex-buffer'
-checks the entire buffer, paragraph by paragraph.  When it finds a
-paragraph that contains a mismatch, it displays point at the beginning
-of the paragraph for a few seconds and pushes a mark at that spot.
-Scanning continues until the whole buffer has been checked or until you
-type another key.  The positions of the last several paragraphs with
-mismatches can be found in the mark ring (*note Mark Ring::).
-
-   Note that square brackets and parentheses, not just braces, are
-matched in TeX mode.  This is wrong if you want to  check TeX syntax.
-However, parentheses and square brackets are likely to be used in text
-as matching delimiters and it is useful for the various motion commands
-and automatic match display to work with them.
-
-   In LaTeX input, `\begin' and `\end' commands must balance.  After
-you insert a `\begin', use `C-c C-f' (`tex-close-latex-block') to
-insert automatically a matching `\end' (on a new line following the
-`\begin').  A blank line is inserted between the two, and point is left
-there.
-