- command to start up Gnus (if not running) and enter a mail mode buffer.
-@item
- allow editing the group description from the group buffer
-for backends that support that.
-@item
-gnus-hide,show-all-topics
-@item
- groups and sub-topics should be allowed to mingle inside each topic,
-and not just list all subtopics at the end.
-@item
- a command to remove all read articles that are not needed to connect
-threads -- `gnus-summary-limit-to-sparse-unread'?
-@item
- a variable to turn off limiting/cutting of threads in the tree buffer.
-@item
- a variable to limit how many files are uudecoded.
-@item
- add zombie groups to a special "New Groups" topic.
-@item
- server mode command: close/open all connections
-@item
- put a file date in gnus-score-alist and check whether the file
-has been changed before using it.
-@item
- on exit from a digest group, go to the next article in the parent group.
-@item
- hide (sub)threads with low score.
-@item
- when expiring, remove all marks from expired articles.
-@item
- gnus-summary-limit-to-body
-@item
- a regexp alist that says what level groups are to be subscribed
-on. Eg. -- `(("nnml:" . 1))'.
-@item
- easier interface to nnkiboze to create ephemeral groups that
-contain groups that match a regexp.
-@item
- allow newlines in <URL:> urls, but remove them before using
-the URL.
-@item
- If there is no From line, the mail backends should fudge one from the
-"From " line.
-@item
- fuzzy simplifying should strip all non-alpha-numerical info
-from subject lines.
-@item
- gnus-soup-brew-soup-with-high-scores.
-@item
- nntp-ping-before-connect
-@item
- command to check whether NOV is evil. "list overview.fmt".
-@item
- when entering a group, Gnus should look through the score
-files very early for `local' atoms and set those local variables.
-@item
- message annotations.
-@item
- topics are always yanked before groups, and that's not good.
-@item
- (set-extent-property extent 'help-echo "String to display in minibuf")
-to display help in the minibuffer on buttons under XEmacs.
-@item
- allow group line format spec to say how many articles there
-are in the cache.
-@item
- AUTHINFO GENERIC
-@item
- `run-with-idle-timer' in gnus-demon.
-@item
- stop using invisible text properties and start using overlays instead
-@item
- C-c C-f C-e to add an Expires header.
-@item
- go from one group to the next; everything is expunged; go to the
-next group instead of going to the group buffer.
-@item
- gnus-renumber-cache -- to renumber the cache using "low" numbers.
-@item
- record topic changes in the dribble buffer.
-@item
- `nnfolder-generate-active-file' should look at the folders it
-finds and generate proper active ranges.
-@item
- nneething-look-in-files-for-article-heads variable to control
-whether nneething should sniff all files in the directories.
-@item
- gnus-fetch-article -- start Gnus, enter group, display article
-@item
- gnus-dont-move-articles-to-same-group variable when respooling.
-@item
- when messages are crossposted between several auto-expirable groups,
-articles aren't properly marked as expirable.
-@item
- nneething should allow deletion/moving.
-@item
- TAB on the last button should go to the first button.
-@item
- if the car of an element in `mail-split-methods' is a function,
-and the function returns non-nil, use that as the name of the group(s) to
-save mail in.
-@item
- command for listing all score files that have been applied.
-@item
- a command in the article buffer to return to `summary' config.
-@item
- `gnus-always-post-using-current-server' -- variable to override
-`C-c C-c' when posting.
-@item
- nnmail-group-spool-alist -- says where each group should use
-as a spool file.
-@item
- when an article is crossposted to an auto-expirable group, the article
-should be marker as expirable.
-@item
- article mode command/menu for "send region as URL to browser".
-@item
- on errors, jump to info nodes that explain the error. For instance,
-on invalid From headers, or on error messages from the nntp server.
-@item
- when gathering threads, make the article that has no "Re: " the parent.
-Also consult Date headers.
-@item
- a token in splits to call shrink-window-if-larger-than-buffer
-@item
- `1 0 A M' to do matches on the active hashtb.
-@item
- duplicates -- command to remove Gnus-Warning header, use the read
-Message-ID, delete the "original".
-@item
- when replying to several messages at once, put the "other" message-ids
-into a See-Also header.
-@item
- support setext: URL:http://www.bsdi.com/setext/
-@item
- support ProleText: <URL:http://proletext.clari.net/prole/proletext.html>
-@item
- when browsing a foreign server, the groups that are already subscribed
-should be listed as such and not as "K".
-@item
- generate font names dynamically.
-@item
- score file mode auto-alist.
-@item
- allow nndoc to change/add/delete things from documents. Implement
-methods for each format for adding an article to the document.
-@item
- `gnus-fetch-old-headers' `all' value to incorporate
-absolutely all headers there is.
-@item
- function like `|', but concatenate all marked articles
-and pipe them to the process.
-@item
- cache the list of killed (or active) groups in a separate file. Update
-the file whenever we read the active file or the list
-of killed groups in the .eld file reaches a certain length.
-@item
- function for starting to edit a file to put into
-the current mail group.
-@item
- score-find-trace should display the total score of the article.
-@item
- "ghettozie" -- score on Xref header and nix it out after using it
-to avoid marking as read in other groups it has been crossposted to.
-@item
- look at procmail splitting. The backends should create
-the groups automatically if a spool file exists for that group.
-@item
- function for backends to register themselves with Gnus.
-@item
- when replying to several process-marked articles,
-have all the From end up in Cc headers? Variable to toggle.
-@item
- command to delete a crossposted mail article from all
-groups it has been mailed to.
-@item
- `B c' and `B m' should be crosspost aware.
-@item
- hide-pgp should also hide PGP public key blocks.
-@item
- Command in the group buffer to respool process-marked groups.
-@item
- `gnus-summary-find-matching' should accept
-pseudo-"headers" like "body", "head" and "all"
-@item
- When buttifying <URL: > things, all white space (including
-newlines) should be ignored.
-@item
- Process-marking all groups in a topic should process-mark
-groups in subtopics as well.
-@item
- Add non-native groups to the list of killed groups when killing them.
-@item
- nntp-suggest-kewl-config to probe the nntp server and suggest
-variable settings.
-@item
- add edit and forward secondary marks.
-@item
- nnml shouldn't visit its .overview files.
-@item
- allow customizing sorting within gathered threads.
-@item
- `B q' shouldn't select the current article.
-@item
- nnmbox should support a newsgroups file for descriptions.
-@item
- allow fetching mail from several pop servers.
-@item
- Be able to specify whether the saving commands save the original
-or the formatted article.
-@item
- a command to reparent with the child process-marked (cf. `T ^'.).
-@item
- I think the possibility to send a password with nntp-open-rlogin
-should be a feature in Red Gnus.
-@item
- The `Z n' command should be possible to execute from a mouse click.
-@item
- more limiting functions -- date, etc.
-@item
- be able to limit on a random header; on body; using reverse matches.
-@item
- a group parameter (`absofucking-total-expiry') that will make Gnus expire
-even unread articles.
-@item
- a command to print the article buffer as postscript.
-@item
- variable to disable password fetching when opening by nntp-open-telnet.
-@item
- manual: more example servers -- nntp with rlogin, telnet
-@item
- checking for bogus groups should clean topic alists as well.
-@item
- canceling articles in foreign groups.
-@item
- article number in folded topics isn't properly updated by
-Xref handling.
-@item
- Movement in the group buffer to the next unread group should go to the
-next closed topic with unread messages if no group can be found.
-@item
- Extensive info pages generated on the fly with help everywhere --
-in the "*Gnus edit*" buffers, for instance.
-@item
- Topic movement commands -- like thread movement. Up, down, forward, next.
-@item
- a way to tick/mark as read Gcc'd articles.
-@item
- a way to say that all groups within a specific topic comes
-from a particular server? Hm.
-@item
- `gnus-article-fill-if-long-lines' -- a function to fill
-the article buffer if there are any looong lines there.
-@item
- `T h' should jump to the parent topic and fold it.
-@item
- a command to create an ephemeral nndoc group out of a file,
-and then splitting it/moving it to some other group/backend.
-@item
- a group parameter for nnkiboze groups that says that
-all kibozed articles should be entered into the cache.
-@item
- It should also probably be possible to delimit what
-`gnus-jog-cache' does -- for instance, work on just some groups, or on
-some levels, and entering just articles that have a score higher than
-a certain number.
-@item
- nnfolder should append to the folder instead of re-writing
-the entire folder to disk when accepting new messages.
-@item
- allow all backends to do the proper thing with .gz files.
-@item
- a backend for reading collections of babyl files nnbabylfolder?
-@item
- a command for making the native groups into foreign groups.
-@item
- server mode command for clearing read marks from all groups
-from a server.
-@item
- when following up multiple articles, include all To, Cc, etc headers
-from all articles.
-@item
- a command for deciding what the total score of the current
-thread is. Also a way to highlight based on this.
-@item
- command to show and edit group scores
-@item
- a gnus-tree-minimize-horizontal to minimize tree buffers
-horizontally.
-@item
- command to generate nnml overview file for one group.
-@item
- `C-u C-u a' -- prompt for many crossposted groups.
-@item
- keep track of which mail groups have received new articles (in this session).
-Be able to generate a report and perhaps do some marking in the group
-buffer.
-@item
- gnus-build-sparse-threads to a number -- build only sparse threads
-that are of that length.
-@item
- have nnmh respect mh's unseen sequence in .mh_profile.
-@item
- cache the newsgroups descriptions locally.
-@item
- asynchronous posting under nntp.
-@item
- be able to control word adaptive scoring from the score files.
-@item
- a variable to make `C-c C-c' post using the "current" select method.
-@item
- `limit-exclude-low-scored-articles'.
+functionality
+
+@lisp
+(defun spam-blackbox-register-spam-routine ()
+ (spam-generic-register-routine
+ ;; the spam function
+ (lambda (article)
+ (let ((from (spam-fetch-field-from-fast article)))
+ (when (stringp from)
+ (blackbox-do-something-with-this-spammer from))))
+ ;; the ham function
+ nil))
+
+(defun spam-blackbox-register-ham-routine ()
+ (spam-generic-register-routine
+ ;; the spam function
+ nil
+ ;; the ham function
+ (lambda (article)
+ (let ((from (spam-fetch-field-from-fast article)))
+ (when (stringp from)
+ (blackbox-do-something-with-this-ham-sender from))))))
+@end lisp
+
+Write the @code{blackbox-do-something-with-this-ham-sender} and
+@code{blackbox-do-something-with-this-spammer} functions. You can add
+more complex code than fetching the message sender, but keep in mind
+that retrieving the whole message takes significantly longer than the
+sender through @code{spam-fetch-field-from-fast}, because the message
+senders are kept in memory by Gnus.
+
+@end enumerate
+
+
+@node Filtering Spam Using Statistics with spam-stat
+@subsection Filtering Spam Using Statistics with spam-stat
+@cindex Paul Graham
+@cindex Graham, Paul
+@cindex naive Bayesian spam filtering
+@cindex Bayesian spam filtering, naive
+@cindex spam filtering, naive Bayesian
+
+Paul Graham has written an excellent essay about spam filtering using
+statistics: @uref{http://www.paulgraham.com/spam.html,A Plan for
+Spam}. In it he describes the inherent deficiency of rule-based
+filtering as used by SpamAssassin, for example: Somebody has to write
+the rules, and everybody else has to install these rules. You are
+always late. It would be much better, he argues, to filter mail based
+on whether it somehow resembles spam or non-spam. One way to measure
+this is word distribution. He then goes on to describe a solution
+that checks whether a new mail resembles any of your other spam mails
+or not.
+
+The basic idea is this: Create a two collections of your mail, one
+with spam, one with non-spam. Count how often each word appears in
+either collection, weight this by the total number of mails in the
+collections, and store this information in a dictionary. For every
+word in a new mail, determine its probability to belong to a spam or a
+non-spam mail. Use the 15 most conspicuous words, compute the total
+probability of the mail being spam. If this probability is higher
+than a certain threshold, the mail is considered to be spam.
+
+Gnus supports this kind of filtering. But it needs some setting up.
+First, you need two collections of your mail, one with spam, one with
+non-spam. Then you need to create a dictionary using these two
+collections, and save it. And last but not least, you need to use
+this dictionary in your fancy mail splitting rules.
+
+@menu
+* Creating a spam-stat dictionary::
+* Splitting mail using spam-stat::
+* Low-level interface to the spam-stat dictionary::
+@end menu
+
+@node Creating a spam-stat dictionary
+@subsubsection Creating a spam-stat dictionary
+
+Before you can begin to filter spam based on statistics, you must
+create these statistics based on two mail collections, one with spam,
+one with non-spam. These statistics are then stored in a dictionary
+for later use. In order for these statistics to be meaningful, you
+need several hundred emails in both collections.
+
+Gnus currently supports only the nnml back end for automated dictionary
+creation. The nnml back end stores all mails in a directory, one file
+per mail. Use the following:
+
+@defun spam-stat-process-spam-directory
+Create spam statistics for every file in this directory. Every file
+is treated as one spam mail.
+@end defun
+
+@defun spam-stat-process-non-spam-directory
+Create non-spam statistics for every file in this directory. Every
+file is treated as one non-spam mail.
+@end defun
+
+Usually you would call @code{spam-stat-process-spam-directory} on a
+directory such as @file{~/Mail/mail/spam} (this usually corresponds
+the the group @samp{nnml:mail.spam}), and you would call
+@code{spam-stat-process-non-spam-directory} on a directory such as
+@file{~/Mail/mail/misc} (this usually corresponds the the group
+@samp{nnml:mail.misc}).
+
+When you are using IMAP, you won't have the mails available locally,
+so that will not work. One solution is to use the Gnus Agent to cache
+the articles. Then you can use directories such as
+@file{"~/News/agent/nnimap/mail.yourisp.com/personal_spam"} for
+@code{spam-stat-process-spam-directory}. @xref{Agent as Cache}.
+
+@defvar spam-stat
+This variable holds the hash-table with all the statistics -- the
+dictionary we have been talking about. For every word in either
+collection, this hash-table stores a vector describing how often the
+word appeared in spam and often it appeared in non-spam mails.
+@end defvar
+
+If you want to regenerate the statistics from scratch, you need to
+reset the dictionary.
+
+@defun spam-stat-reset
+Reset the @code{spam-stat} hash-table, deleting all the statistics.
+@end defun
+
+When you are done, you must save the dictionary. The dictionary may
+be rather large. If you will not update the dictionary incrementally
+(instead, you will recreate it once a month, for example), then you
+can reduce the size of the dictionary by deleting all words that did
+not appear often enough or that do not clearly belong to only spam or
+only non-spam mails.
+
+@defun spam-stat-reduce-size
+Reduce the size of the dictionary. Use this only if you do not want
+to update the dictionary incrementally.
+@end defun
+
+@defun spam-stat-save
+Save the dictionary.
+@end defun
+
+@defvar spam-stat-file
+The filename used to store the dictionary. This defaults to
+@file{~/.spam-stat.el}.
+@end defvar
+
+@node Splitting mail using spam-stat
+@subsubsection Splitting mail using spam-stat
+
+In order to use @code{spam-stat} to split your mail, you need to add the
+following to your @file{~/.gnus.el} file:
+
+@lisp
+(require 'spam-stat)
+(spam-stat-load)
+@end lisp
+
+This will load the necessary Gnus code, and the dictionary you
+created.
+
+Next, you need to adapt your fancy splitting rules: You need to
+determine how to use @code{spam-stat}. The following examples are for
+the nnml back end. Using the nnimap back end works just as well. Just
+use @code{nnimap-split-fancy} instead of @code{nnmail-split-fancy}.
+
+In the simplest case, you only have two groups, @samp{mail.misc} and
+@samp{mail.spam}. The following expression says that mail is either
+spam or it should go into @samp{mail.misc}. If it is spam, then
+@code{spam-stat-split-fancy} will return @samp{mail.spam}.
+
+@lisp
+(setq nnmail-split-fancy
+ `(| (: spam-stat-split-fancy)
+ "mail.misc"))
+@end lisp
+
+@defvar spam-stat-split-fancy-spam-group
+The group to use for spam. Default is @samp{mail.spam}.
+@end defvar
+
+If you also filter mail with specific subjects into other groups, use
+the following expression. Only mails not matching the regular
+expression are considered potential spam.
+
+@lisp
+(setq nnmail-split-fancy
+ `(| ("Subject" "\\bspam-stat\\b" "mail.emacs")
+ (: spam-stat-split-fancy)
+ "mail.misc"))
+@end lisp
+
+If you want to filter for spam first, then you must be careful when
+creating the dictionary. Note that @code{spam-stat-split-fancy} must
+consider both mails in @samp{mail.emacs} and in @samp{mail.misc} as
+non-spam, therefore both should be in your collection of non-spam
+mails, when creating the dictionary!
+
+@lisp
+(setq nnmail-split-fancy
+ `(| (: spam-stat-split-fancy)
+ ("Subject" "\\bspam-stat\\b" "mail.emacs")
+ "mail.misc"))
+@end lisp
+
+You can combine this with traditional filtering. Here, we move all
+HTML-only mails into the @samp{mail.spam.filtered} group. Note that since
+@code{spam-stat-split-fancy} will never see them, the mails in
+@samp{mail.spam.filtered} should be neither in your collection of spam mails,
+nor in your collection of non-spam mails, when creating the
+dictionary!
+
+@lisp
+(setq nnmail-split-fancy
+ `(| ("Content-Type" "text/html" "mail.spam.filtered")
+ (: spam-stat-split-fancy)
+ ("Subject" "\\bspam-stat\\b" "mail.emacs")
+ "mail.misc"))
+@end lisp
+
+
+@node Low-level interface to the spam-stat dictionary
+@subsubsection Low-level interface to the spam-stat dictionary
+
+The main interface to using @code{spam-stat}, are the following functions:
+
+@defun spam-stat-buffer-is-spam
+Called in a buffer, that buffer is considered to be a new spam mail.
+Use this for new mail that has not been processed before.
+@end defun
+
+@defun spam-stat-buffer-is-no-spam
+Called in a buffer, that buffer is considered to be a new non-spam
+mail. Use this for new mail that has not been processed before.
+@end defun
+
+@defun spam-stat-buffer-change-to-spam
+Called in a buffer, that buffer is no longer considered to be normal
+mail but spam. Use this to change the status of a mail that has
+already been processed as non-spam.
+@end defun
+
+@defun spam-stat-buffer-change-to-non-spam
+Called in a buffer, that buffer is no longer considered to be spam but
+normal mail. Use this to change the status of a mail that has already
+been processed as spam.
+@end defun
+
+@defun spam-stat-save
+Save the hash table to the file. The filename used is stored in the
+variable @code{spam-stat-file}.
+@end defun
+
+@defun spam-stat-load
+Load the hash table from a file. The filename used is stored in the
+variable @code{spam-stat-file}.
+@end defun
+
+@defun spam-stat-score-word
+Return the spam score for a word.
+@end defun
+
+@defun spam-stat-score-buffer
+Return the spam score for a buffer.
+@end defun
+
+@defun spam-stat-split-fancy
+Use this function for fancy mail splitting. Add the rule @samp{(:
+spam-stat-split-fancy)} to @code{nnmail-split-fancy}
+@end defun
+
+Make sure you load the dictionary before using it. This requires the
+following in your @file{~/.gnus.el} file:
+
+@lisp
+(require 'spam-stat)
+(spam-stat-load)
+@end lisp
+
+Typical test will involve calls to the following functions:
+
+@example
+Reset: (setq spam-stat (make-hash-table :test 'equal))
+Learn spam: (spam-stat-process-spam-directory "~/Mail/mail/spam")
+Learn non-spam: (spam-stat-process-non-spam-directory "~/Mail/mail/misc")
+Save table: (spam-stat-save)
+File size: (nth 7 (file-attributes spam-stat-file))
+Number of words: (hash-table-count spam-stat)
+Test spam: (spam-stat-test-directory "~/Mail/mail/spam")
+Test non-spam: (spam-stat-test-directory "~/Mail/mail/misc")
+Reduce table size: (spam-stat-reduce-size)
+Save table: (spam-stat-save)
+File size: (nth 7 (file-attributes spam-stat-file))
+Number of words: (hash-table-count spam-stat)
+Test spam: (spam-stat-test-directory "~/Mail/mail/spam")
+Test non-spam: (spam-stat-test-directory "~/Mail/mail/misc")
+@end example
+
+Here is how you would create your dictionary:
+
+@example
+Reset: (setq spam-stat (make-hash-table :test 'equal))
+Learn spam: (spam-stat-process-spam-directory "~/Mail/mail/spam")
+Learn non-spam: (spam-stat-process-non-spam-directory "~/Mail/mail/misc")
+Repeat for any other non-spam group you need...
+Reduce table size: (spam-stat-reduce-size)
+Save table: (spam-stat-save)
+@end example
+
+@node Various Various
+@section Various Various
+@cindex mode lines
+@cindex highlights
+
+@table @code
+
+@item gnus-home-directory
+@vindex gnus-home-directory
+All Gnus file and directory variables will be initialized from this
+variable, which defaults to @file{~/}.
+
+@item gnus-directory
+@vindex gnus-directory
+Most Gnus storage file and directory variables will be initialized from
+this variable, which defaults to the @samp{SAVEDIR} environment
+variable, or @file{~/News/} if that variable isn't set.
+
+Note that gnus is mostly loaded when the @file{.gnus.el} file is read.
+This means that other directory variables that are initialized from this
+variable won't be set properly if you set this variable in
+@file{.gnus.el}. Set this variable in @file{.emacs} instead.
+
+@item gnus-default-directory
+@vindex gnus-default-directory
+Not related to the above variable at all---this variable says what the
+default directory of all Gnus buffers should be. If you issue commands
+like @kbd{C-x C-f}, the prompt you'll get starts in the current buffer's
+default directory. If this variable is @code{nil} (which is the
+default), the default directory will be the default directory of the
+buffer you were in when you started Gnus.
+
+@item gnus-verbose
+@vindex gnus-verbose
+This variable is an integer between zero and ten. The higher the value,
+the more messages will be displayed. If this variable is zero, Gnus
+will never flash any messages, if it is seven (which is the default),
+most important messages will be shown, and if it is ten, Gnus won't ever
+shut up, but will flash so many messages it will make your head swim.
+
+@item gnus-verbose-backends
+@vindex gnus-verbose-backends
+This variable works the same way as @code{gnus-verbose}, but it applies
+to the Gnus back ends instead of Gnus proper.
+
+@item nnheader-max-head-length
+@vindex nnheader-max-head-length
+When the back ends read straight heads of articles, they all try to read
+as little as possible. This variable (default 4096) specifies
+the absolute max length the back ends will try to read before giving up
+on finding a separator line between the head and the body. If this
+variable is @code{nil}, there is no upper read bound. If it is
+@code{t}, the back ends won't try to read the articles piece by piece,
+but read the entire articles. This makes sense with some versions of
+@code{ange-ftp} or @code{efs}.
+
+@item nnheader-head-chop-length
+@vindex nnheader-head-chop-length
+This variable (default 2048) says how big a piece of each article to
+read when doing the operation described above.
+
+@item nnheader-file-name-translation-alist
+@vindex nnheader-file-name-translation-alist
+@cindex file names
+@cindex invalid characters in file names
+@cindex characters in file names
+This is an alist that says how to translate characters in file names.
+For instance, if @samp{:} is invalid as a file character in file names
+on your system (you OS/2 user you), you could say something like:
+
+@lisp
+(setq nnheader-file-name-translation-alist
+ '((?: . ?_)))
+@end lisp
+
+In fact, this is the default value for this variable on OS/2 and MS
+Windows (phooey) systems.
+
+@item gnus-hidden-properties
+@vindex gnus-hidden-properties
+This is a list of properties to use to hide ``invisible'' text. It is
+@code{(invisible t intangible t)} by default on most systems, which
+makes invisible text invisible and intangible.
+
+@item gnus-parse-headers-hook
+@vindex gnus-parse-headers-hook
+A hook called before parsing headers. It can be used, for instance, to
+gather statistics on the headers fetched, or perhaps you'd like to prune
+some headers. I don't see why you'd want that, though.
+
+@item gnus-shell-command-separator
+@vindex gnus-shell-command-separator
+String used to separate two shell commands. The default is @samp{;}.
+
+@item gnus-invalid-group-regexp
+@vindex gnus-invalid-group-regexp
+
+Regexp to match ``invalid'' group names when querying user for a group
+name. The default value catches some @strong{really} invalid group
+names who could possibly mess up Gnus internally (like allowing
+@samp{:} in a group name, which is normally used to delimit method and
+group).
+
+@sc{imap} users might want to allow @samp{/} in group names though.
+
+
+@end table
+
+@node The End
+@chapter The End
+
+Well, that's the manual---you can get on with your life now. Keep in
+touch. Say hello to your cats from me.
+
+My @strong{ghod}---I just can't stand goodbyes. Sniffle.
+
+Ol' Charles Reznikoff said it pretty well, so I leave the floor to him:
+
+@quotation
+@strong{Te Deum}
+
+@sp 1
+Not because of victories @*
+I sing,@*
+having none,@*
+but for the common sunshine,@*
+the breeze,@*
+the largess of the spring.
+
+@sp 1
+Not for victory@*
+but for the day's work done@*
+as well as I was able;@*
+not for a seat upon the dais@*
+but at the common table.@*
+@end quotation
+
+
+@node Appendices
+@chapter Appendices
+
+@menu
+* XEmacs:: Requirements for installing under XEmacs.
+* History:: How Gnus got where it is today.
+* On Writing Manuals:: Why this is not a beginner's guide.
+* Terminology:: We use really difficult, like, words here.
+* Customization:: Tailoring Gnus to your needs.
+* Troubleshooting:: What you might try if things do not work.
+* Gnus Reference Guide:: Rilly, rilly technical stuff.
+* Emacs for Heathens:: A short introduction to Emacsian terms.
+* Frequently Asked Questions::
+@end menu
+
+
+@node XEmacs
+@section XEmacs
+@cindex XEmacs
+@cindex Installing under XEmacs
+
+XEmacs is distributed as a collection of packages. You should install
+whatever packages the Gnus XEmacs package requires. The current
+requirements are @samp{gnus}, @samp{w3}, @samp{mh-e},
+@samp{mailcrypt}, @samp{rmail}, @samp{eterm}, @samp{mail-lib},
+@samp{xemacs-base}, @samp{sh-script} and @samp{fsf-compat}. The
+@samp{misc-games} package is required for Morse decoding.
+
+
+@node History
+@section History
+
+@cindex history
+@sc{gnus} was written by Masanobu @sc{Umeda}. When autumn crept up in
+'94, Lars Magne Ingebrigtsen grew bored and decided to rewrite Gnus.
+
+If you want to investigate the person responsible for this outrage,
+you can point your (feh!) web browser to
+@uref{http://quimby.gnus.org/}. This is also the primary
+distribution point for the new and spiffy versions of Gnus, and is
+known as The Site That Destroys Newsrcs And Drives People Mad.
+
+During the first extended alpha period of development, the new Gnus was
+called ``(ding) Gnus''. @dfn{(ding)} is, of course, short for
+@dfn{ding is not Gnus}, which is a total and utter lie, but who cares?
+(Besides, the ``Gnus'' in this abbreviation should probably be
+pronounced ``news'' as @sc{Umeda} intended, which makes it a more
+appropriate name, don't you think?)
+
+In any case, after spending all that energy on coming up with a new and
+spunky name, we decided that the name was @emph{too} spunky, so we
+renamed it back again to ``Gnus''. But in mixed case. ``Gnus'' vs.
+``@sc{gnus}''. New vs. old.
+
+@menu
+* Gnus Versions:: What Gnus versions have been released.
+* Other Gnus Versions:: Other Gnus versions that also have been released.
+* Why?:: What's the point of Gnus?
+* Compatibility:: Just how compatible is Gnus with @sc{gnus}?
+* Conformity:: Gnus tries to conform to all standards.
+* Emacsen:: Gnus can be run on a few modern Emacsen.
+* Gnus Development:: How Gnus is developed.
+* Contributors:: Oodles of people.
+* New Features:: Pointers to some of the new stuff in Gnus.
+@end menu
+
+
+@node Gnus Versions
+@subsection Gnus Versions
+@cindex ding Gnus
+@cindex September Gnus
+@cindex Red Gnus
+@cindex Quassia Gnus
+@cindex Pterodactyl Gnus
+@cindex Oort Gnus
+@cindex No Gnus
+@cindex Gnus versions
+
+The first ``proper'' release of Gnus 5 was done in November 1995 when it
+was included in the Emacs 19.30 distribution (132 (ding) Gnus releases
+plus 15 Gnus 5.0 releases).
+
+In May 1996 the next Gnus generation (aka. ``September Gnus'' (after 99
+releases)) was released under the name ``Gnus 5.2'' (40 releases).
+
+On July 28th 1996 work on Red Gnus was begun, and it was released on
+January 25th 1997 (after 84 releases) as ``Gnus 5.4'' (67 releases).
+
+On September 13th 1997, Quassia Gnus was started and lasted 37 releases.
+If was released as ``Gnus 5.6'' on March 8th 1998 (46 releases).
+
+Gnus 5.6 begat Pterodactyl Gnus on August 29th 1998 and was released as
+``Gnus 5.8'' (after 99 releases and a CVS repository) on December 3rd
+1999.
+
+On the 26th of October 2000, Oort Gnus was begun.
+
+If you happen upon a version of Gnus that has a prefixed name --
+``(ding) Gnus'', ``September Gnus'', ``Red Gnus'', ``Quassia Gnus'',
+``Pterodactyl Gnus'', ``Oort Gnus'' -- don't panic. Don't let it know
+that you're frightened. Back away. Slowly. Whatever you do, don't
+run. Walk away, calmly, until you're out of its reach. Find a proper
+released version of Gnus and snuggle up to that instead.
+
+
+@node Other Gnus Versions
+@subsection Other Gnus Versions
+@cindex Semi-gnus
+
+In addition to the versions of Gnus which have had their releases
+coordinated by Lars, one major development has been Semi-gnus from
+Japan. It's based on a library called @sc{semi}, which provides
+@sc{mime} capabilities.
+
+These Gnusae are based mainly on Gnus 5.6 and Pterodactyl Gnus.
+Collectively, they are called ``Semi-gnus'', and different strains are
+called T-gnus, ET-gnus, Nana-gnus and Chaos. These provide powerful
+@sc{mime} and multilingualization things, especially important for
+Japanese users.
+
+
+@node Why?
+@subsection Why?
+
+What's the point of Gnus?
+
+I want to provide a ``rad'', ``happening'', ``way cool'' and ``hep''
+newsreader, that lets you do anything you can think of. That was my
+original motivation, but while working on Gnus, it has become clear to
+me that this generation of newsreaders really belong in the stone age.
+Newsreaders haven't developed much since the infancy of the net. If the
+volume continues to rise with the current rate of increase, all current
+newsreaders will be pretty much useless. How do you deal with
+newsgroups that have thousands of new articles each day? How do you
+keep track of millions of people who post?
+
+Gnus offers no real solutions to these questions, but I would very much
+like to see Gnus being used as a testing ground for new methods of
+reading and fetching news. Expanding on @sc{Umeda}-san's wise decision
+to separate the newsreader from the back ends, Gnus now offers a simple
+interface for anybody who wants to write new back ends for fetching mail
+and news from different sources. I have added hooks for customizations
+everywhere I could imagine it being useful. By doing so, I'm inviting
+every one of you to explore and invent.
+
+May Gnus never be complete. @kbd{C-u 100 M-x all-hail-emacs} and
+@kbd{C-u 100 M-x all-hail-xemacs}.
+
+
+@node Compatibility
+@subsection Compatibility
+
+@cindex compatibility
+Gnus was designed to be fully compatible with @sc{gnus}. Almost all key
+bindings have been kept. More key bindings have been added, of course,
+but only in one or two obscure cases have old bindings been changed.
+
+Our motto is:
+@quotation
+@cartouche
+@center In a cloud bones of steel.
+@end cartouche
+@end quotation
+
+All commands have kept their names. Some internal functions have changed
+their names.
+
+The @code{gnus-uu} package has changed drastically. @xref{Decoding
+Articles}.
+
+One major compatibility question is the presence of several summary
+buffers. All variables relevant while reading a group are
+buffer-local to the summary buffer they belong in. Although many
+important variables have their values copied into their global
+counterparts whenever a command is executed in the summary buffer, this
+change might lead to incorrect values being used unless you are careful.
+
+All code that relies on knowledge of @sc{gnus} internals will probably
+fail. To take two examples: Sorting @code{gnus-newsrc-alist} (or
+changing it in any way, as a matter of fact) is strictly verboten. Gnus
+maintains a hash table that points to the entries in this alist (which
+speeds up many functions), and changing the alist directly will lead to
+peculiar results.
+
+@cindex hilit19
+@cindex highlighting
+Old hilit19 code does not work at all. In fact, you should probably
+remove all hilit code from all Gnus hooks
+(@code{gnus-group-prepare-hook} and @code{gnus-summary-prepare-hook}).
+Gnus provides various integrated functions for highlighting. These are
+faster and more accurate. To make life easier for everybody, Gnus will
+by default remove all hilit calls from all hilit hooks. Uncleanliness!
+Away!
+
+Packages like @code{expire-kill} will no longer work. As a matter of
+fact, you should probably remove all old @sc{gnus} packages (and other
+code) when you start using Gnus. More likely than not, Gnus already
+does what you have written code to make @sc{gnus} do. (Snicker.)
+
+Even though old methods of doing things are still supported, only the
+new methods are documented in this manual. If you detect a new method of
+doing something while reading this manual, that does not mean you have
+to stop doing it the old way.
+
+Gnus understands all @sc{gnus} startup files.
+
+@kindex M-x gnus-bug
+@findex gnus-bug
+@cindex reporting bugs
+@cindex bugs
+Overall, a casual user who hasn't written much code that depends on
+@sc{gnus} internals should suffer no problems. If problems occur,
+please let me know by issuing that magic command @kbd{M-x gnus-bug}.
+
+@vindex gnus-bug-create-help-buffer
+If you are in the habit of sending bug reports @emph{very} often, you
+may find the helpful help buffer annoying after a while. If so, set
+@code{gnus-bug-create-help-buffer} to @code{nil} to avoid having it pop
+up at you.
+
+
+@node Conformity
+@subsection Conformity
+
+No rebels without a clue here, ma'am. We conform to all standards known
+to (wo)man. Except for those standards and/or conventions we disagree
+with, of course.
+
+@table @strong
+
+@item RFC (2)822
+@cindex RFC 822
+@cindex RFC 2822
+There are no known breaches of this standard.
+
+@item RFC 1036
+@cindex RFC 1036
+There are no known breaches of this standard, either.
+
+@item Son-of-RFC 1036
+@cindex Son-of-RFC 1036
+We do have some breaches to this one.
+
+@table @emph
+
+@item X-Newsreader
+@itemx User-Agent
+These are considered to be ``vanity headers'', while I consider them
+to be consumer information. After seeing so many badly formatted
+articles coming from @code{tin} and @code{Netscape} I know not to use
+either of those for posting articles. I would not have known that if
+it wasn't for the @code{X-Newsreader} header.
+@end table
+
+@item USEFOR
+@cindex USEFOR
+USEFOR is an IETF working group writing a successor to RFC 1036, based
+on Son-of-RFC 1036. They have produced a number of drafts proposing
+various changes to the format of news articles. The Gnus towers will
+look into implementing the changes when the draft is accepted as an RFC.
+
+@item MIME - RFC 2045-2049 etc
+@cindex MIME
+All the various @sc{mime} RFCs are supported.
+
+@item Disposition Notifications - RFC 2298
+Message Mode is able to request notifications from the receiver.
+
+@item PGP - RFC 1991 and RFC 2440
+@cindex RFC 1991
+@cindex RFC 2440
+RFC 1991 is the original PGP message specification, published as a
+Information RFC. RFC 2440 was the follow-up, now called Open PGP, and
+put on the Standards Track. Both document a non-@sc{mime} aware PGP
+format. Gnus supports both encoding (signing and encryption) and
+decoding (verification and decryption).
+
+@item PGP/MIME - RFC 2015/3156
+RFC 2015 (superseded by 3156 which references RFC 2440 instead of RFC
+1991) describes the @sc{mime}-wrapping around the RF 1991/2440 format.
+Gnus supports both encoding and decoding.
+
+@item S/MIME - RFC 2633
+RFC 2633 describes the @sc{s/mime} format.
+
+@item IMAP - RFC 1730/2060, RFC 2195, RFC 2086, RFC 2359, RFC 2595, RFC 1731
+RFC 1730 is @sc{imap} version 4, updated somewhat by RFC 2060 (@sc{imap} 4
+revision 1). RFC 2195 describes CRAM-MD5 authentication for @sc{imap}. RFC
+2086 describes access control lists (ACLs) for @sc{imap}. RFC 2359
+describes a @sc{imap} protocol enhancement. RFC 2595 describes the proper
+TLS integration (STARTTLS) with @sc{imap}. RFC 1731 describes the
+GSSAPI/Kerberos4 mechanisms for @sc{imap}.
+
+@end table
+
+If you ever notice Gnus acting non-compliant with regards to the texts
+mentioned above, don't hesitate to drop a note to Gnus Towers and let us
+know.
+
+
+@node Emacsen
+@subsection Emacsen
+@cindex Emacsen
+@cindex XEmacs
+@cindex Mule
+@cindex Emacs
+
+Gnus should work on :
+
+@itemize @bullet
+