(gnus-summary-move-article): Use `gnus-request-article-this-buffer'.

[elisp/gnus.git-] / texi / gnus.texi

diff --git a/texi/gnus.texi b/texi/gnus.texi
index 42638fb..d5c5e7e 100644 (file)
--- a/texi/gnus.texi
+++ b/texi/gnus.texi
@@ -1,7 +1,7 @@
 \input texinfo                  @c -*-texinfo-*-
 
 @setfilename gnus
 \input texinfo                  @c -*-texinfo-*-
 
 @setfilename gnus

-@settitle Semi-gnus 6.4.0 Manual
+@settitle Semi-gnus 6.7.2 Manual

 @synindex fn cp
 @synindex vr cp
 @synindex pg cp
 @synindex fn cp
 @synindex vr cp
 @synindex pg cp

@@ -316,7 +316,7 @@ into another language, under the above conditions for modified versions.
 @tex
 
 @titlepage
 @tex
 
 @titlepage

-@title Semi-gnus 6.4.0 Manual
+@title Semi-gnus 6.7.2 Manual

 
 @author by Lars Magne Ingebrigtsen
 @page
 
 @author by Lars Magne Ingebrigtsen
 @page

@@ -359,7 +359,7 @@ internationalization/localization and multiscript features based on MULE
 API.  So Semi-gnus does not discriminate various language communities.
 Oh, if you are a Klingon, please wait Unicode Next Generation.
 
 API.  So Semi-gnus does not discriminate various language communities.
 Oh, if you are a Klingon, please wait Unicode Next Generation.
 

-This manual corresponds to Semi-gnus 6.4.0.
+This manual corresponds to Semi-gnus 6.7.2.

 
 @end ifinfo
 
 
 @end ifinfo
 

@@ -941,6 +941,10 @@ into the directory where the @file{.newsrc} file is located.  (This is
 normally the user's home directory.)  The dribble file will get the same
 file permissions as the @code{.newsrc} file.
 
 normally the user's home directory.)  The dribble file will get the same
 file permissions as the @code{.newsrc} file.
 

+@vindex gnus-always-read-dribble-file
+If @code{gnus-always-read-dribble-file} is non-@code{nil}, Gnus will
+read the dribble file on startup without querying the user.
+

 
 @node The Active File
 @section The Active File
 
 @node The Active File
 @section The Active File

@@ -1945,10 +1949,12 @@ Add the current group to an @code{nnvirtual} group
 methods.
 
 @vindex gnus-activate-foreign-newsgroups
 methods.
 
 @vindex gnus-activate-foreign-newsgroups

-If @code{gnus-activate-foreign-newsgroups} is a positive number, gnus
-will check all foreign groups with this level or lower at startup.  This
-might take quite a while, especially if you subscribe to lots of groups
-from different @sc{nntp} servers.
+If @code{gnus-activate-foreign-newsgroups} is a positive number,
+gnus will check all foreign groups with this level or lower at startup.
+This might take quite a while, especially if you subscribe to lots of
+groups from different @sc{nntp} servers.  Also @pxref{Group Levels};
+@code{gnus-activate-level} also affects activation of foreign
+newsgroups. 

 
 
 @node Group Parameters
 
 
 @node Group Parameters

@@ -9030,14 +9036,18 @@ server.
 @findex nntp-open-network-stream
 @item nntp-open-connection-function
 @vindex nntp-open-connection-function
 @findex nntp-open-network-stream
 @item nntp-open-connection-function
 @vindex nntp-open-connection-function

-This function is used to connect to the remote system.  Three pre-made
-functions are @code{nntp-open-network-stream}, which is the default, and
-simply connects to some port or other on the remote system.  The other
-two are @code{nntp-open-rlogin}, which does an @samp{rlogin} on the
+This function is used to connect to the remote system.  Four pre-made
+functions are supplied:
+
+@table @code
+@item nntp-open-network-stream
+This is the default, and simply connects to some port or other on the
+remote system.
+
+@item nntp-open-rlogin
+Does an @samp{rlogin} on the

 remote system, and then does a @samp{telnet} to the @sc{nntp} server
 remote system, and then does a @samp{telnet} to the @sc{nntp} server

-available there, and @code{nntp-open-telnet}, which does a @samp{telnet}
-to the remote system and then another @samp{telnet} to get to the
-@sc{nntp} server.
+available there.

 
 @code{nntp-open-rlogin}-related variables:
 
 
 @code{nntp-open-rlogin}-related variables:
 

@@ -9058,6 +9068,10 @@ User name on the remote system.
 
 @end table
 
 
 @end table
 

+@item nntp-open-telnet
+Does a @samp{telnet} to the remote system and then another @samp{telnet}
+to get to the @sc{nntp} server.
+

 @code{nntp-open-telnet}-related variables:
 
 @table @code
 @code{nntp-open-telnet}-related variables:
 
 @table @code

@@ -9095,6 +9109,27 @@ This works for Solaris @code{telnet}, for instance.
 
 @end table
 
 
 @end table
 

+@findex nntp-open-ssl-stream
+@item nntp-open-ssl-stream
+Opens a connection to a server over a @dfn{secure} channel.  To use this
+you must have SSLay installed
+(@file{ftp://ftp.psy.uq.oz.au/pub/Crypto/SSL}, and you also need
+@file{ssl.el} (from the W3 distributeion, for instance).  You then
+define a server as follows:
+
+@lisp
+;; Type `C-c C-c' after you've finished editing.
+;;
+;; "snews" is port 563 and is predefined in our /etc/services
+;;
+(nntp "snews.bar.com"
+      (nntp-open-connection-function nntp-open-ssl-stream)
+      (nntp-port-number "snews")
+      (nntp-address "snews.bar.com"))
+@end lisp
+
+@end table
+

 @item nntp-end-of-line
 @vindex nntp-end-of-line
 String to use as end-of-line marker when talking to the @sc{nntp}
 @item nntp-end-of-line
 @vindex nntp-end-of-line
 String to use as end-of-line marker when talking to the @sc{nntp}

@@ -11020,6 +11055,24 @@ will get this @code{From} header inserted:
 To: alt-religion-emacs@@GATEWAY
 @end example
 
 To: alt-religion-emacs@@GATEWAY
 @end example
 

+The following pre-defined functions exist:
+
+@findex nngateway-simple-header-transformation
+@table @code
+
+@item nngateway-simple-header-transformation
+Creates a @code{To} header that looks like
+@var{newsgroup}@@@code{nngateway-address}.
+
+@findex nngateway-mail2news-header-transformation
+
+@item nngateway-mail2news-header-transformation
+Creates a @code{To} header that looks like
+@samp{mail2news}@@@code{nngateway-address}.
+
+@end table
+
+

 @end table
 
 So, to use this, simply say something like:
 @end table
 
 So, to use this, simply say something like:

@@ -11822,12 +11875,6 @@ Run the current summary through the scoring process
 around with your score files behind Gnus' back and want to see the
 effect you're having.
 
 around with your score files behind Gnus' back and want to see the
 effect you're having.
 

-@item V a
-@kindex V a (Summary)
-@findex gnus-summary-score-entry
-Add a new score entry, and allow specifying all elements
-(@code{gnus-summary-score-entry}).
-

 @item V c
 @kindex V c (Summary)
 @findex gnus-score-change-score-file
 @item V c
 @kindex V c (Summary)
 @findex gnus-score-change-score-file

@@ -15729,7 +15776,7 @@ actually are people who are using Gnus.  Who'd'a thunk it!
 * ding Gnus::          New things in Gnus 5.0/5.1, the first new Gnus.
 * September Gnus::     The Thing Formally Known As Gnus 5.3/5.3.
 * Red Gnus::           Third time best---Gnus 5.4/5.5.
 * ding Gnus::          New things in Gnus 5.0/5.1, the first new Gnus.
 * September Gnus::     The Thing Formally Known As Gnus 5.3/5.3.
 * Red Gnus::           Third time best---Gnus 5.4/5.5.

-* Quassia Gnus::       Two times two is four, or Gnus 5.6.11.
+* Quassia Gnus::       Two times two is four, or Gnus 5.6.15.

 @end menu
 
 These lists are, of course, just @emph{short} overviews of the
 @end menu
 
 These lists are, of course, just @emph{short} overviews of the

@@ -16264,7 +16311,7 @@ Emphasized text can be properly fontisized:
 @node Quassia Gnus
 @subsubsection Quassia Gnus
 
 @node Quassia Gnus
 @subsubsection Quassia Gnus
 

-New features in Gnus 5.6.11:
+New features in Gnus 5.6.15:

 
 @itemize @bullet
 
 
 @itemize @bullet
 

@@ -17560,6 +17607,15 @@ New spec: %~(tab 56) to put point on column 56
 Allow Gnus Agent scoring to use normal score files.
 
 @item
 Allow Gnus Agent scoring to use normal score files.
 
 @item

+Rething the Agent active file thing.  `M-g' doesn't update the active
+file, for instance.
+
+@item
+With dummy roots, `^' and then selecing the first article
+in any other dummy thread will make gnus highlight the
+dummy root instead of the first article.
+
+@item

 Solve the halting problem.
 
 @c TODO
 Solve the halting problem.
 
 @c TODO