*-dec-osf1.2 | *-dec-osf1* ) opsys=decosf1-2 ;;
*-dec-osf3.[2-9] ) opsys=decosf3-2 ;;
*-dec-osf3* ) opsys=decosf3-1 ;;
- *-dec-osf4* ) opsys=decosf4-0 ;;
+ *-dec-osf[4-9]* ) opsys=decosf4-0 ;;
*-*-ultrix[0-3].* | *-*-ultrix4.0* ) opsys=bsd4-2 ;;
*-*-ultrix4.[12]* ) opsys=bsd4-3 ;;
{ echo "configure: error: Aborting due to known problem" 1>&2; exit 1; }
;;
*:i*86*:2.7.2*)
- case "$GCC_VERSION" in
- 2.7.2)
- case "$CFLAGS" in
- *-O2*|*-O3*)
+ case "$CFLAGS" in
+ *-O2*|*-O3*)
+ case "$GCC_VERSION" in
+ 2.7.2)
case "$CFLAGS" in
*-fno-strength-reduce*) ;;
*)
esac
;;
esac
+ case "$CFLAGS" in
+ *-fno-caller-saves*) ;;
+ *)
+ echo "$ac_t""yes" 1>&6
+ echo "configure: warning: Don't use -O2 with gcc 2.7.2 under Intel/XXX without also using" 1>&2
+ echo "configure: warning: -fno-caller-saves." 1>&2
+ { echo "configure: error: Aborting due to known problem" 1>&2; exit 1; }
+ ;;
+ esac
;;
esac
- case "$CFLAGS" in
- *-fno-caller-saves*) ;;
- *)
- echo "$ac_t""yes" 1>&6
- echo "configure: warning: Don't use -O2 with gcc 2.7.2 under Intel/XXX without also using" 1>&2
- echo "configure: warning: -fno-caller-saves." 1>&2
- { echo "configure: error: Aborting due to known problem" 1>&2; exit 1; }
- ;;
- esac
;;
esac
echo "$ac_t""no" 1>&6
test -n "$YACC" || YACC="yacc"
-for ac_hdr in a.out.h cygwin/version.h fcntl.h inttypes.h libgen.h locale.h mach/mach.h sys/param.h sys/pstat.h sys/time.h sys/timeb.h sys/un.h ulimit.h unistd.h utime.h
+for ac_hdr in a.out.h elf.h cygwin/version.h fcntl.h inttypes.h libgen.h locale.h mach/mach.h sys/param.h sys/pstat.h sys/time.h sys/timeb.h sys/un.h ulimit.h unistd.h utime.h
do
ac_safe=`echo "$ac_hdr" | sed 'y%./+-%__p_%'`
echo $ac_n "checking for $ac_hdr""... $ac_c" 1>&6
done
- echo $ac_n "checking for XFree86""... $ac_c" 1>&6
-echo "configure:6298: checking for XFree86" >&5
- if test -d "/usr/X386/include" -o \
- -f "/etc/XF86Config" -o \
- -f "/etc/X11/XF86Config" -o \
- -f "/usr/X11R6/lib/X11/XF86Config"; then
- echo "$ac_t""yes" 1>&6
- { test "$extra_verbose" = "yes" && cat << \EOF
- Defining HAVE_XFREE386
+ for ac_func in XRegisterIMInstantiateCallback
+do
+echo $ac_n "checking for $ac_func""... $ac_c" 1>&6
+echo "configure:6300: checking for $ac_func" >&5
+
+cat > conftest.$ac_ext <<EOF
+#line 6303 "configure"
+#include "confdefs.h"
+/* System header to define __stub macros and hopefully few prototypes,
+ which can conflict with char $ac_func(); below. */
+#include <assert.h>
+/* Override any gcc2 internal prototype to avoid an error. */
+/* We use char because int might match the return type of a gcc2
+ builtin and then its argument prototype would still apply. */
+char $ac_func();
+
+int main() {
+
+/* The GNU C library defines this for functions which it implements
+ to always fail with ENOSYS. Some functions are actually named
+ something starting with __ and the normal name is an alias. */
+#if defined (__stub_$ac_func) || defined (__stub___$ac_func)
+choke me
+#else
+$ac_func();
+#endif
+
+; return 0; }
+EOF
+if { (eval echo configure:6326: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
+ rm -rf conftest*
+ eval "ac_cv_func_$ac_func=yes"
+else
+ echo "configure: failed program was:" >&5
+ cat conftest.$ac_ext >&5
+ rm -rf conftest*
+ eval "ac_cv_func_$ac_func=no"
+fi
+rm -f conftest*
+
+if eval "test \"`echo '$ac_cv_func_'$ac_func`\" = yes"; then
+ echo "$ac_t""yes" 1>&6
+ ac_tr_func=HAVE_`echo $ac_func | tr 'abcdefghijklmnopqrstuvwxyz' 'ABCDEFGHIJKLMNOPQRSTUVWXYZ'`
+ { test "$extra_verbose" = "yes" && cat << EOF
+ Defining $ac_tr_func
+EOF
+cat >> confdefs.h <<EOF
+#define $ac_tr_func 1
+EOF
+}
+
+else
+ echo "$ac_t""no" 1>&6
+fi
+done
+
+ echo $ac_n "checking for standard XRegisterIMInstantiateCallback prototype""... $ac_c" 1>&6
+echo "configure:6354: checking for standard XRegisterIMInstantiateCallback prototype" >&5
+ cat > conftest.$ac_ext <<EOF
+#line 6356 "configure"
+#include "confdefs.h"
+
+#define NeedFunctionPrototypes 1
+#include <X11/Xlib.h>
+extern Bool XRegisterIMInstantiateCallback(
+ Display*, struct _XrmHashBucketRec*, char*, char*, XIMProc, XPointer*);
+
+int main() {
+
+; return 0; }
+EOF
+if { (eval echo configure:6368: \"$ac_compile\") 1>&5; (eval $ac_compile) 2>&5; }; then
+ rm -rf conftest*
+ echo "$ac_t""yes" 1>&6
+else
+ echo "configure: failed program was:" >&5
+ cat conftest.$ac_ext >&5
+ rm -rf conftest*
+ echo "$ac_t""no" 1>&6
+ { test "$extra_verbose" = "yes" && cat << \EOF
+ Defining XREGISTERIMINSTANTIATECALLBACK_NONSTANDARD_PROTOTYPE
EOF
cat >> confdefs.h <<\EOF
-#define HAVE_XFREE386 1
+#define XREGISTERIMINSTANTIATECALLBACK_NONSTANDARD_PROTOTYPE 1
EOF
}
- else
- echo "$ac_t""no" 1>&6
- fi
+fi
+rm -f conftest*
test -z "$with_xmu" && {
echo $ac_n "checking for XmuReadBitmapDataFromFile in -lXmu""... $ac_c" 1>&6
-echo "configure:6318: checking for XmuReadBitmapDataFromFile in -lXmu" >&5
+echo "configure:6389: checking for XmuReadBitmapDataFromFile in -lXmu" >&5
ac_lib_var=`echo Xmu'_'XmuReadBitmapDataFromFile | sed 'y%./+-%__p_%'`
xe_check_libs=" -lXmu "
cat > conftest.$ac_ext <<EOF
-#line 6323 "configure"
+#line 6394 "configure"
#include "confdefs.h"
/* Override any gcc2 internal prototype to avoid an error. */
/* We use char because int might match the return type of a gcc2
XmuReadBitmapDataFromFile()
; return 0; }
EOF
-if { (eval echo configure:6334: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
+if { (eval echo configure:6405: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
rm -rf conftest*
eval "ac_cv_lib_$ac_lib_var=yes"
else
echo $ac_n "checking for main in -lXbsd""... $ac_c" 1>&6
-echo "configure:6373: checking for main in -lXbsd" >&5
+echo "configure:6444: checking for main in -lXbsd" >&5
ac_lib_var=`echo Xbsd'_'main | sed 'y%./+-%__p_%'`
xe_check_libs=" -lXbsd "
cat > conftest.$ac_ext <<EOF
-#line 6378 "configure"
+#line 6449 "configure"
#include "confdefs.h"
int main() {
main()
; return 0; }
EOF
-if { (eval echo configure:6385: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
+if { (eval echo configure:6456: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
rm -rf conftest*
eval "ac_cv_lib_$ac_lib_var=yes"
else
fi
if test "$with_msw" != "no"; then
echo "checking for MS-Windows" 1>&6
-echo "configure:6422: checking for MS-Windows" >&5
+echo "configure:6493: checking for MS-Windows" >&5
echo $ac_n "checking for main in -lgdi32""... $ac_c" 1>&6
-echo "configure:6425: checking for main in -lgdi32" >&5
+echo "configure:6496: checking for main in -lgdi32" >&5
ac_lib_var=`echo gdi32'_'main | sed 'y%./+-%__p_%'`
xe_check_libs=" -lgdi32 "
cat > conftest.$ac_ext <<EOF
-#line 6430 "configure"
+#line 6501 "configure"
#include "confdefs.h"
int main() {
main()
; return 0; }
EOF
-if { (eval echo configure:6437: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
+if { (eval echo configure:6508: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
rm -rf conftest*
eval "ac_cv_lib_$ac_lib_var=yes"
else
EOF
}
+
+ MAKE_SUBDIR="$MAKE_SUBDIR netinstall" && if test "$extra_verbose" = "yes"; then echo " Appending \"netinstall\" to \$MAKE_SUBDIR"; fi
+ SRC_SUBDIR_DEPS="$SRC_SUBDIR_DEPS netinstall" && if test "$extra_verbose" = "yes"; then echo " Appending \"netinstall\" to \$SRC_SUBDIR_DEPS"; fi
+ INSTALL_ARCH_DEP_SUBDIR="$INSTALL_ARCH_DEP_SUBDIR netinstall" && if test "$extra_verbose" = "yes"; then echo " Appending \"netinstall\" to \$INSTALL_ARCH_DEP_SUBDIR"; fi
+
install_pp="$blddir/lib-src/installexe.sh"
libs_system="$libs_system -lshell32 -lgdi32 -luser32 -lcomdlg32 -lcomctl32 -lwinspool" && if test "$extra_verbose" = "yes"; then echo " Appending \"-lshell32 -lgdi32 -luser32 -lcomdlg32 -lcomctl32 -lwinspool\" to \$libs_system"; fi
test "$with_dragndrop" != no && dragndrop_proto="$dragndrop_proto msw" && if test "$extra_verbose" = "yes"; then echo " Appending \"msw\" to \$dragndrop_proto"; fi
fi
fi
cat > conftest.$ac_ext <<EOF
-#line 6503 "configure"
+#line 6579 "configure"
#include "confdefs.h"
#include <fcntl.h>
int main() { return (open("/dev/windows", O_RDONLY, 0) > 0)? 0 : 1; }
EOF
-if { (eval echo configure:6508: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest && (./conftest; exit $?) 2>&5
+if { (eval echo configure:6584: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest && (./conftest; exit $?) 2>&5
then
{ test "$extra_verbose" = "yes" && cat << \EOF
Defining HAVE_MSG_SELECT
if test "$with_x11" = "yes"; then
ac_safe=`echo "X11/extensions/shape.h" | sed 'y%./+-%__p_%'`
echo $ac_n "checking for X11/extensions/shape.h""... $ac_c" 1>&6
-echo "configure:6572: checking for X11/extensions/shape.h" >&5
+echo "configure:6648: checking for X11/extensions/shape.h" >&5
cat > conftest.$ac_ext <<EOF
-#line 6575 "configure"
+#line 6651 "configure"
#include "confdefs.h"
#include <X11/extensions/shape.h>
EOF
ac_try="$ac_cpp conftest.$ac_ext >/dev/null 2>conftest.out"
-{ (eval echo configure:6580: \"$ac_try\") 1>&5; (eval $ac_try) 2>&5; }
+{ (eval echo configure:6656: \"$ac_try\") 1>&5; (eval $ac_try) 2>&5; }
ac_err=`grep -v '^ *+' conftest.out | grep -v "^conftest.${ac_ext}\$"`
if test -z "$ac_err"; then
rm -rf conftest*
esac
echo "checking for WM_COMMAND option" 1>&6
-echo "configure:6627: checking for WM_COMMAND option" >&5;
+echo "configure:6703: checking for WM_COMMAND option" >&5;
if test "$with_wmcommand" != "no"; then
{ test "$extra_verbose" = "yes" && cat << \EOF
Defining HAVE_WMCOMMAND
test -z "$with_xauth" && test "$window_system" = "none" && with_xauth=no
test -z "$with_xauth" && { ac_safe=`echo "X11/Xauth.h" | sed 'y%./+-%__p_%'`
echo $ac_n "checking for X11/Xauth.h""... $ac_c" 1>&6
-echo "configure:6642: checking for X11/Xauth.h" >&5
+echo "configure:6718: checking for X11/Xauth.h" >&5
cat > conftest.$ac_ext <<EOF
-#line 6645 "configure"
+#line 6721 "configure"
#include "confdefs.h"
#include <X11/Xauth.h>
EOF
ac_try="$ac_cpp conftest.$ac_ext >/dev/null 2>conftest.out"
-{ (eval echo configure:6650: \"$ac_try\") 1>&5; (eval $ac_try) 2>&5; }
+{ (eval echo configure:6726: \"$ac_try\") 1>&5; (eval $ac_try) 2>&5; }
ac_err=`grep -v '^ *+' conftest.out | grep -v "^conftest.${ac_ext}\$"`
if test -z "$ac_err"; then
rm -rf conftest*
}
test -z "$with_xauth" && {
echo $ac_n "checking for XauGetAuthByAddr in -lXau""... $ac_c" 1>&6
-echo "configure:6673: checking for XauGetAuthByAddr in -lXau" >&5
+echo "configure:6749: checking for XauGetAuthByAddr in -lXau" >&5
ac_lib_var=`echo Xau'_'XauGetAuthByAddr | sed 'y%./+-%__p_%'`
xe_check_libs=" -lXau "
cat > conftest.$ac_ext <<EOF
-#line 6678 "configure"
+#line 6754 "configure"
#include "confdefs.h"
/* Override any gcc2 internal prototype to avoid an error. */
/* We use char because int might match the return type of a gcc2
XauGetAuthByAddr()
; return 0; }
EOF
-if { (eval echo configure:6689: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
+if { (eval echo configure:6765: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
rm -rf conftest*
eval "ac_cv_lib_$ac_lib_var=yes"
else
for dir in "" "Tt/" "desktop/" ; do
ac_safe=`echo "${dir}tt_c.h" | sed 'y%./+-%__p_%'`
echo $ac_n "checking for ${dir}tt_c.h""... $ac_c" 1>&6
-echo "configure:6734: checking for ${dir}tt_c.h" >&5
+echo "configure:6810: checking for ${dir}tt_c.h" >&5
cat > conftest.$ac_ext <<EOF
-#line 6737 "configure"
+#line 6813 "configure"
#include "confdefs.h"
#include <${dir}tt_c.h>
EOF
ac_try="$ac_cpp conftest.$ac_ext >/dev/null 2>conftest.out"
-{ (eval echo configure:6742: \"$ac_try\") 1>&5; (eval $ac_try) 2>&5; }
+{ (eval echo configure:6818: \"$ac_try\") 1>&5; (eval $ac_try) 2>&5; }
ac_err=`grep -v '^ *+' conftest.out | grep -v "^conftest.${ac_ext}\$"`
if test -z "$ac_err"; then
rm -rf conftest*
xe_msg_checking="for tt_message_create in -ltt"
test -n "$extra_libs" && xe_msg_checking="$xe_msg_checking using extra libs $extra_libs"
echo $ac_n "checking "$xe_msg_checking"""... $ac_c" 1>&6
-echo "configure:6778: checking "$xe_msg_checking"" >&5
+echo "configure:6854: checking "$xe_msg_checking"" >&5
ac_lib_var=`echo tt'_'tt_message_create | sed 'y%./+-%__p_%'`
xe_check_libs=" -ltt $extra_libs"
cat > conftest.$ac_ext <<EOF
-#line 6783 "configure"
+#line 6859 "configure"
#include "confdefs.h"
/* Override any gcc2 internal prototype to avoid an error. */
/* We use char because int might match the return type of a gcc2
tt_message_create()
; return 0; }
EOF
-if { (eval echo configure:6794: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
+if { (eval echo configure:6870: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
rm -rf conftest*
eval "ac_cv_lib_$ac_lib_var=yes"
else
test -z "$with_cde" && { ac_safe=`echo "Dt/Dt.h" | sed 'y%./+-%__p_%'`
echo $ac_n "checking for Dt/Dt.h""... $ac_c" 1>&6
-echo "configure:6851: checking for Dt/Dt.h" >&5
+echo "configure:6927: checking for Dt/Dt.h" >&5
cat > conftest.$ac_ext <<EOF
-#line 6854 "configure"
+#line 6930 "configure"
#include "confdefs.h"
#include <Dt/Dt.h>
EOF
ac_try="$ac_cpp conftest.$ac_ext >/dev/null 2>conftest.out"
-{ (eval echo configure:6859: \"$ac_try\") 1>&5; (eval $ac_try) 2>&5; }
+{ (eval echo configure:6935: \"$ac_try\") 1>&5; (eval $ac_try) 2>&5; }
ac_err=`grep -v '^ *+' conftest.out | grep -v "^conftest.${ac_ext}\$"`
if test -z "$ac_err"; then
rm -rf conftest*
}
test -z "$with_cde" && {
echo $ac_n "checking for DtDndDragStart in -lDtSvc""... $ac_c" 1>&6
-echo "configure:6882: checking for DtDndDragStart in -lDtSvc" >&5
+echo "configure:6958: checking for DtDndDragStart in -lDtSvc" >&5
ac_lib_var=`echo DtSvc'_'DtDndDragStart | sed 'y%./+-%__p_%'`
xe_check_libs=" -lDtSvc "
cat > conftest.$ac_ext <<EOF
-#line 6887 "configure"
+#line 6963 "configure"
#include "confdefs.h"
/* Override any gcc2 internal prototype to avoid an error. */
/* We use char because int might match the return type of a gcc2
DtDndDragStart()
; return 0; }
EOF
-if { (eval echo configure:6898: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
+if { (eval echo configure:6974: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
rm -rf conftest*
eval "ac_cv_lib_$ac_lib_var=yes"
else
dragndrop_proto="$dragndrop_proto OffiX" && if test "$extra_verbose" = "yes"; then echo " Appending \"OffiX\" to \$dragndrop_proto"; fi
fi
-echo $ac_n "checking if drag and drop API is needed""... $ac_c" 1>&6
-echo "configure:6967: checking if drag and drop API is needed" >&5
if test "$with_dragndrop" != "no" ; then
+ echo $ac_n "checking if drag and drop API is needed""... $ac_c" 1>&6
+echo "configure:7044: checking if drag and drop API is needed" >&5
if test -n "$dragndrop_proto" ; then
with_dragndrop=yes
echo "$ac_t""yes (${dragndrop_proto} )" 1>&6
fi
echo "checking for LDAP" 1>&6
-echo "configure:6988: checking for LDAP" >&5
+echo "configure:7064: checking for LDAP" >&5
test -z "$with_ldap" && { ac_safe=`echo "ldap.h" | sed 'y%./+-%__p_%'`
echo $ac_n "checking for ldap.h""... $ac_c" 1>&6
-echo "configure:6991: checking for ldap.h" >&5
+echo "configure:7067: checking for ldap.h" >&5
cat > conftest.$ac_ext <<EOF
-#line 6994 "configure"
+#line 7070 "configure"
#include "confdefs.h"
#include <ldap.h>
EOF
ac_try="$ac_cpp conftest.$ac_ext >/dev/null 2>conftest.out"
-{ (eval echo configure:6999: \"$ac_try\") 1>&5; (eval $ac_try) 2>&5; }
+{ (eval echo configure:7075: \"$ac_try\") 1>&5; (eval $ac_try) 2>&5; }
ac_err=`grep -v '^ *+' conftest.out | grep -v "^conftest.${ac_ext}\$"`
if test -z "$ac_err"; then
rm -rf conftest*
}
test -z "$with_ldap" && { ac_safe=`echo "lber.h" | sed 'y%./+-%__p_%'`
echo $ac_n "checking for lber.h""... $ac_c" 1>&6
-echo "configure:7022: checking for lber.h" >&5
+echo "configure:7098: checking for lber.h" >&5
cat > conftest.$ac_ext <<EOF
-#line 7025 "configure"
+#line 7101 "configure"
#include "confdefs.h"
#include <lber.h>
EOF
ac_try="$ac_cpp conftest.$ac_ext >/dev/null 2>conftest.out"
-{ (eval echo configure:7030: \"$ac_try\") 1>&5; (eval $ac_try) 2>&5; }
+{ (eval echo configure:7106: \"$ac_try\") 1>&5; (eval $ac_try) 2>&5; }
ac_err=`grep -v '^ *+' conftest.out | grep -v "^conftest.${ac_ext}\$"`
if test -z "$ac_err"; then
rm -rf conftest*
if test "$with_ldap" != "no"; then
echo $ac_n "checking for ldap_search in -lldap""... $ac_c" 1>&6
-echo "configure:7054: checking for ldap_search in -lldap" >&5
+echo "configure:7130: checking for ldap_search in -lldap" >&5
ac_lib_var=`echo ldap'_'ldap_search | sed 'y%./+-%__p_%'`
xe_check_libs=" -lldap "
cat > conftest.$ac_ext <<EOF
-#line 7059 "configure"
+#line 7135 "configure"
#include "confdefs.h"
/* Override any gcc2 internal prototype to avoid an error. */
/* We use char because int might match the return type of a gcc2
ldap_search()
; return 0; }
EOF
-if { (eval echo configure:7070: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
+if { (eval echo configure:7146: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
rm -rf conftest*
eval "ac_cv_lib_$ac_lib_var=yes"
else
xe_msg_checking="for ldap_open in -lldap"
test -n "-llber" && xe_msg_checking="$xe_msg_checking using extra libs -llber"
echo $ac_n "checking "$xe_msg_checking"""... $ac_c" 1>&6
-echo "configure:7095: checking "$xe_msg_checking"" >&5
+echo "configure:7171: checking "$xe_msg_checking"" >&5
ac_lib_var=`echo ldap'_'ldap_open | sed 'y%./+-%__p_%'`
xe_check_libs=" -lldap -llber"
cat > conftest.$ac_ext <<EOF
-#line 7100 "configure"
+#line 7176 "configure"
#include "confdefs.h"
/* Override any gcc2 internal prototype to avoid an error. */
/* We use char because int might match the return type of a gcc2
ldap_open()
; return 0; }
EOF
-if { (eval echo configure:7111: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
+if { (eval echo configure:7187: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
rm -rf conftest*
eval "ac_cv_lib_$ac_lib_var=yes"
else
xe_msg_checking="for ldap_open in -lldap"
test -n "-llber -lkrb" && xe_msg_checking="$xe_msg_checking using extra libs -llber -lkrb"
echo $ac_n "checking "$xe_msg_checking"""... $ac_c" 1>&6
-echo "configure:7136: checking "$xe_msg_checking"" >&5
+echo "configure:7212: checking "$xe_msg_checking"" >&5
ac_lib_var=`echo ldap'_'ldap_open | sed 'y%./+-%__p_%'`
xe_check_libs=" -lldap -llber -lkrb"
cat > conftest.$ac_ext <<EOF
-#line 7141 "configure"
+#line 7217 "configure"
#include "confdefs.h"
/* Override any gcc2 internal prototype to avoid an error. */
/* We use char because int might match the return type of a gcc2
ldap_open()
; return 0; }
EOF
-if { (eval echo configure:7152: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
+if { (eval echo configure:7228: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
rm -rf conftest*
eval "ac_cv_lib_$ac_lib_var=yes"
else
xe_msg_checking="for ldap_open in -lldap"
test -n "-llber -lkrb -ldes" && xe_msg_checking="$xe_msg_checking using extra libs -llber -lkrb -ldes"
echo $ac_n "checking "$xe_msg_checking"""... $ac_c" 1>&6
-echo "configure:7177: checking "$xe_msg_checking"" >&5
+echo "configure:7253: checking "$xe_msg_checking"" >&5
ac_lib_var=`echo ldap'_'ldap_open | sed 'y%./+-%__p_%'`
xe_check_libs=" -lldap -llber -lkrb -ldes"
cat > conftest.$ac_ext <<EOF
-#line 7182 "configure"
+#line 7258 "configure"
#include "confdefs.h"
/* Override any gcc2 internal prototype to avoid an error. */
/* We use char because int might match the return type of a gcc2
ldap_open()
; return 0; }
EOF
-if { (eval echo configure:7193: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
+if { (eval echo configure:7269: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
rm -rf conftest*
eval "ac_cv_lib_$ac_lib_var=yes"
else
for ac_func in ldap_set_option ldap_get_lderrno ldap_result2error ldap_parse_result
do
echo $ac_n "checking for $ac_func""... $ac_c" 1>&6
-echo "configure:7244: checking for $ac_func" >&5
+echo "configure:7320: checking for $ac_func" >&5
cat > conftest.$ac_ext <<EOF
-#line 7247 "configure"
+#line 7323 "configure"
#include "confdefs.h"
/* System header to define __stub macros and hopefully few prototypes,
which can conflict with char $ac_func(); below. */
; return 0; }
EOF
-if { (eval echo configure:7270: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
+if { (eval echo configure:7346: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
rm -rf conftest*
eval "ac_cv_func_$ac_func=yes"
else
if test "$with_postgresql" != "no"; then
echo "checking for PostgreSQL" 1>&6
-echo "configure:7301: checking for PostgreSQL" >&5
+echo "configure:7377: checking for PostgreSQL" >&5
for header_dir in "" "pgsql/" "postgresql/"; do
ac_safe=`echo "${header_dir}libpq-fe.h" | sed 'y%./+-%__p_%'`
echo $ac_n "checking for ${header_dir}libpq-fe.h""... $ac_c" 1>&6
-echo "configure:7306: checking for ${header_dir}libpq-fe.h" >&5
+echo "configure:7382: checking for ${header_dir}libpq-fe.h" >&5
cat > conftest.$ac_ext <<EOF
-#line 7309 "configure"
+#line 7385 "configure"
#include "confdefs.h"
#include <${header_dir}libpq-fe.h>
EOF
ac_try="$ac_cpp conftest.$ac_ext >/dev/null 2>conftest.out"
-{ (eval echo configure:7314: \"$ac_try\") 1>&5; (eval $ac_try) 2>&5; }
+{ (eval echo configure:7390: \"$ac_try\") 1>&5; (eval $ac_try) 2>&5; }
ac_err=`grep -v '^ *+' conftest.out | grep -v "^conftest.${ac_ext}\$"`
if test -z "$ac_err"; then
rm -rf conftest*
test -n "$libpq_fe_h_file" && {
echo $ac_n "checking for PQconnectdb in -lpq""... $ac_c" 1>&6
-echo "configure:7338: checking for PQconnectdb in -lpq" >&5
+echo "configure:7414: checking for PQconnectdb in -lpq" >&5
ac_lib_var=`echo pq'_'PQconnectdb | sed 'y%./+-%__p_%'`
xe_check_libs=" -lpq "
cat > conftest.$ac_ext <<EOF
-#line 7343 "configure"
+#line 7419 "configure"
#include "confdefs.h"
/* Override any gcc2 internal prototype to avoid an error. */
/* We use char because int might match the return type of a gcc2
PQconnectdb()
; return 0; }
EOF
-if { (eval echo configure:7354: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
+if { (eval echo configure:7430: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
rm -rf conftest*
eval "ac_cv_lib_$ac_lib_var=yes"
else
echo $ac_n "checking for PQconnectStart in -lpq""... $ac_c" 1>&6
-echo "configure:7387: checking for PQconnectStart in -lpq" >&5
+echo "configure:7463: checking for PQconnectStart in -lpq" >&5
ac_lib_var=`echo pq'_'PQconnectStart | sed 'y%./+-%__p_%'`
xe_check_libs=" -lpq "
cat > conftest.$ac_ext <<EOF
-#line 7392 "configure"
+#line 7468 "configure"
#include "confdefs.h"
/* Override any gcc2 internal prototype to avoid an error. */
/* We use char because int might match the return type of a gcc2
PQconnectStart()
; return 0; }
EOF
-if { (eval echo configure:7403: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
+if { (eval echo configure:7479: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
rm -rf conftest*
eval "ac_cv_lib_$ac_lib_var=yes"
else
if test "$window_system" != "none"; then
echo "checking for graphics libraries" 1>&6
-echo "configure:7451: checking for graphics libraries" >&5
+echo "configure:7527: checking for graphics libraries" >&5
xpm_problem=""
if test -z "$with_xpm"; then
echo $ac_n "checking for Xpm - no older than 3.4f""... $ac_c" 1>&6
-echo "configure:7456: checking for Xpm - no older than 3.4f" >&5
+echo "configure:7532: checking for Xpm - no older than 3.4f" >&5
xe_check_libs=-lXpm
cat > conftest.$ac_ext <<EOF
-#line 7459 "configure"
+#line 7535 "configure"
#include "confdefs.h"
#define XPM_NUMBERS
#include <X11/xpm.h>
XpmIncludeVersion != XpmLibraryVersion() ? 1 :
XpmIncludeVersion < 30406 ? 2 : 0 ;}
EOF
-if { (eval echo configure:7468: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest && (./conftest; exit $?) 2>&5
+if { (eval echo configure:7544: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest && (./conftest; exit $?) 2>&5
then
./conftest dummy_arg; xpm_status=$?;
if test "$xpm_status" = "0"; then
libs_x="-lXpm $libs_x" && if test "$extra_verbose" = "yes"; then echo " Prepending \"-lXpm\" to \$libs_x"; fi
echo $ac_n "checking for \"FOR_MSW\" xpm""... $ac_c" 1>&6
-echo "configure:7510: checking for \"FOR_MSW\" xpm" >&5
+echo "configure:7586: checking for \"FOR_MSW\" xpm" >&5
xe_check_libs=-lXpm
cat > conftest.$ac_ext <<EOF
-#line 7513 "configure"
+#line 7589 "configure"
#include "confdefs.h"
int main() {
XpmCreatePixmapFromData()
; return 0; }
EOF
-if { (eval echo configure:7520: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
+if { (eval echo configure:7596: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
rm -rf conftest*
xpm_for_msw=no
else
test -z "$with_xface" && { ac_safe=`echo "compface.h" | sed 'y%./+-%__p_%'`
echo $ac_n "checking for compface.h""... $ac_c" 1>&6
-echo "configure:7546: checking for compface.h" >&5
+echo "configure:7622: checking for compface.h" >&5
cat > conftest.$ac_ext <<EOF
-#line 7549 "configure"
+#line 7625 "configure"
#include "confdefs.h"
#include <compface.h>
EOF
ac_try="$ac_cpp conftest.$ac_ext >/dev/null 2>conftest.out"
-{ (eval echo configure:7554: \"$ac_try\") 1>&5; (eval $ac_try) 2>&5; }
+{ (eval echo configure:7630: \"$ac_try\") 1>&5; (eval $ac_try) 2>&5; }
ac_err=`grep -v '^ *+' conftest.out | grep -v "^conftest.${ac_ext}\$"`
if test -z "$ac_err"; then
rm -rf conftest*
}
test -z "$with_xface" && {
echo $ac_n "checking for UnGenFace in -lcompface""... $ac_c" 1>&6
-echo "configure:7577: checking for UnGenFace in -lcompface" >&5
+echo "configure:7653: checking for UnGenFace in -lcompface" >&5
ac_lib_var=`echo compface'_'UnGenFace | sed 'y%./+-%__p_%'`
xe_check_libs=" -lcompface "
cat > conftest.$ac_ext <<EOF
-#line 7582 "configure"
+#line 7658 "configure"
#include "confdefs.h"
/* Override any gcc2 internal prototype to avoid an error. */
/* We use char because int might match the return type of a gcc2
UnGenFace()
; return 0; }
EOF
-if { (eval echo configure:7593: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
+if { (eval echo configure:7669: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
rm -rf conftest*
eval "ac_cv_lib_$ac_lib_var=yes"
else
if test "$with_png $with_tiff" != "no no"; then
echo $ac_n "checking for inflate in -lc""... $ac_c" 1>&6
-echo "configure:7645: checking for inflate in -lc" >&5
+echo "configure:7721: checking for inflate in -lc" >&5
ac_lib_var=`echo c'_'inflate | sed 'y%./+-%__p_%'`
xe_check_libs=" -lc "
cat > conftest.$ac_ext <<EOF
-#line 7650 "configure"
+#line 7726 "configure"
#include "confdefs.h"
/* Override any gcc2 internal prototype to avoid an error. */
/* We use char because int might match the return type of a gcc2
inflate()
; return 0; }
EOF
-if { (eval echo configure:7661: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
+if { (eval echo configure:7737: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
rm -rf conftest*
eval "ac_cv_lib_$ac_lib_var=yes"
else
echo "$ac_t""no" 1>&6
echo $ac_n "checking for inflate in -lz""... $ac_c" 1>&6
-echo "configure:7680: checking for inflate in -lz" >&5
+echo "configure:7756: checking for inflate in -lz" >&5
ac_lib_var=`echo z'_'inflate | sed 'y%./+-%__p_%'`
xe_check_libs=" -lz "
cat > conftest.$ac_ext <<EOF
-#line 7685 "configure"
+#line 7761 "configure"
#include "confdefs.h"
/* Override any gcc2 internal prototype to avoid an error. */
/* We use char because int might match the return type of a gcc2
inflate()
; return 0; }
EOF
-if { (eval echo configure:7696: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
+if { (eval echo configure:7772: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
rm -rf conftest*
eval "ac_cv_lib_$ac_lib_var=yes"
else
echo "$ac_t""no" 1>&6
echo $ac_n "checking for inflate in -lgz""... $ac_c" 1>&6
-echo "configure:7715: checking for inflate in -lgz" >&5
+echo "configure:7791: checking for inflate in -lgz" >&5
ac_lib_var=`echo gz'_'inflate | sed 'y%./+-%__p_%'`
xe_check_libs=" -lgz "
cat > conftest.$ac_ext <<EOF
-#line 7720 "configure"
+#line 7796 "configure"
#include "confdefs.h"
/* Override any gcc2 internal prototype to avoid an error. */
/* We use char because int might match the return type of a gcc2
inflate()
; return 0; }
EOF
-if { (eval echo configure:7731: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
+if { (eval echo configure:7807: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
rm -rf conftest*
eval "ac_cv_lib_$ac_lib_var=yes"
else
test -z "$with_jpeg" && { ac_safe=`echo "jpeglib.h" | sed 'y%./+-%__p_%'`
echo $ac_n "checking for jpeglib.h""... $ac_c" 1>&6
-echo "configure:7761: checking for jpeglib.h" >&5
+echo "configure:7837: checking for jpeglib.h" >&5
cat > conftest.$ac_ext <<EOF
-#line 7764 "configure"
+#line 7840 "configure"
#include "confdefs.h"
#include <jpeglib.h>
EOF
ac_try="$ac_cpp conftest.$ac_ext >/dev/null 2>conftest.out"
-{ (eval echo configure:7769: \"$ac_try\") 1>&5; (eval $ac_try) 2>&5; }
+{ (eval echo configure:7845: \"$ac_try\") 1>&5; (eval $ac_try) 2>&5; }
ac_err=`grep -v '^ *+' conftest.out | grep -v "^conftest.${ac_ext}\$"`
if test -z "$ac_err"; then
rm -rf conftest*
}
test -z "$with_jpeg" && {
echo $ac_n "checking for jpeg_destroy_decompress in -ljpeg""... $ac_c" 1>&6
-echo "configure:7792: checking for jpeg_destroy_decompress in -ljpeg" >&5
+echo "configure:7868: checking for jpeg_destroy_decompress in -ljpeg" >&5
ac_lib_var=`echo jpeg'_'jpeg_destroy_decompress | sed 'y%./+-%__p_%'`
xe_check_libs=" -ljpeg "
cat > conftest.$ac_ext <<EOF
-#line 7797 "configure"
+#line 7873 "configure"
#include "confdefs.h"
/* Override any gcc2 internal prototype to avoid an error. */
/* We use char because int might match the return type of a gcc2
jpeg_destroy_decompress()
; return 0; }
EOF
-if { (eval echo configure:7808: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
+if { (eval echo configure:7884: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
rm -rf conftest*
eval "ac_cv_lib_$ac_lib_var=yes"
else
png_problem=""
test -z "$with_png" && { echo $ac_n "checking for pow""... $ac_c" 1>&6
-echo "configure:7844: checking for pow" >&5
+echo "configure:7920: checking for pow" >&5
cat > conftest.$ac_ext <<EOF
-#line 7847 "configure"
+#line 7923 "configure"
#include "confdefs.h"
/* System header to define __stub macros and hopefully few prototypes,
which can conflict with char pow(); below. */
; return 0; }
EOF
-if { (eval echo configure:7870: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
+if { (eval echo configure:7946: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
rm -rf conftest*
eval "ac_cv_func_pow=yes"
else
}
test -z "$with_png" && { ac_safe=`echo "png.h" | sed 'y%./+-%__p_%'`
echo $ac_n "checking for png.h""... $ac_c" 1>&6
-echo "configure:7891: checking for png.h" >&5
+echo "configure:7967: checking for png.h" >&5
cat > conftest.$ac_ext <<EOF
-#line 7894 "configure"
+#line 7970 "configure"
#include "confdefs.h"
#include <png.h>
EOF
ac_try="$ac_cpp conftest.$ac_ext >/dev/null 2>conftest.out"
-{ (eval echo configure:7899: \"$ac_try\") 1>&5; (eval $ac_try) 2>&5; }
+{ (eval echo configure:7975: \"$ac_try\") 1>&5; (eval $ac_try) 2>&5; }
ac_err=`grep -v '^ *+' conftest.out | grep -v "^conftest.${ac_ext}\$"`
if test -z "$ac_err"; then
rm -rf conftest*
}
test -z "$with_png" && {
echo $ac_n "checking for png_read_image in -lpng""... $ac_c" 1>&6
-echo "configure:7922: checking for png_read_image in -lpng" >&5
+echo "configure:7998: checking for png_read_image in -lpng" >&5
ac_lib_var=`echo png'_'png_read_image | sed 'y%./+-%__p_%'`
xe_check_libs=" -lpng "
cat > conftest.$ac_ext <<EOF
-#line 7927 "configure"
+#line 8003 "configure"
#include "confdefs.h"
/* Override any gcc2 internal prototype to avoid an error. */
/* We use char because int might match the return type of a gcc2
png_read_image()
; return 0; }
EOF
-if { (eval echo configure:7938: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
+if { (eval echo configure:8014: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
rm -rf conftest*
eval "ac_cv_lib_$ac_lib_var=yes"
else
}
if test -z "$with_png"; then
echo $ac_n "checking for workable png version information""... $ac_c" 1>&6
-echo "configure:7961: checking for workable png version information" >&5
+echo "configure:8037: checking for workable png version information" >&5
xe_check_libs="-lpng -lz"
cat > conftest.$ac_ext <<EOF
-#line 7964 "configure"
+#line 8040 "configure"
#include "confdefs.h"
#include <png.h>
int main(int c, char **v) {
if (strcmp(png_libpng_ver, PNG_LIBPNG_VER_STRING) != 0) return 1;
return (PNG_LIBPNG_VER < 10002) ? 2 : 0 ;}
EOF
-if { (eval echo configure:7972: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest && (./conftest; exit $?) 2>&5
+if { (eval echo configure:8048: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest && (./conftest; exit $?) 2>&5
then
./conftest dummy_arg; png_status=$?;
if test "$png_status" = "0"; then
test -z "$with_tiff" && { ac_safe=`echo "tiffio.h" | sed 'y%./+-%__p_%'`
echo $ac_n "checking for tiffio.h""... $ac_c" 1>&6
-echo "configure:8015: checking for tiffio.h" >&5
+echo "configure:8091: checking for tiffio.h" >&5
cat > conftest.$ac_ext <<EOF
-#line 8018 "configure"
+#line 8094 "configure"
#include "confdefs.h"
#include <tiffio.h>
EOF
ac_try="$ac_cpp conftest.$ac_ext >/dev/null 2>conftest.out"
-{ (eval echo configure:8023: \"$ac_try\") 1>&5; (eval $ac_try) 2>&5; }
+{ (eval echo configure:8099: \"$ac_try\") 1>&5; (eval $ac_try) 2>&5; }
ac_err=`grep -v '^ *+' conftest.out | grep -v "^conftest.${ac_ext}\$"`
if test -z "$ac_err"; then
rm -rf conftest*
}
test -z "$with_tiff" && {
echo $ac_n "checking for TIFFClientOpen in -ltiff""... $ac_c" 1>&6
-echo "configure:8046: checking for TIFFClientOpen in -ltiff" >&5
+echo "configure:8122: checking for TIFFClientOpen in -ltiff" >&5
ac_lib_var=`echo tiff'_'TIFFClientOpen | sed 'y%./+-%__p_%'`
xe_check_libs=" -ltiff "
cat > conftest.$ac_ext <<EOF
-#line 8051 "configure"
+#line 8127 "configure"
#include "confdefs.h"
/* Override any gcc2 internal prototype to avoid an error. */
/* We use char because int might match the return type of a gcc2
TIFFClientOpen()
; return 0; }
EOF
-if { (eval echo configure:8062: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
+if { (eval echo configure:8138: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
rm -rf conftest*
eval "ac_cv_lib_$ac_lib_var=yes"
else
if test "$with_x11" = "yes"; then
echo "checking for X11 graphics libraries" 1>&6
-echo "configure:8101: checking for X11 graphics libraries" >&5
+echo "configure:8177: checking for X11 graphics libraries" >&5
echo "checking for the Athena widgets" 1>&6
-echo "configure:8104: checking for the Athena widgets" >&5
+echo "configure:8180: checking for the Athena widgets" >&5
case "$with_athena" in
"xaw" | "") athena_variant=Xaw athena_3d=no ;;
if test "$athena_3d" = "no"; then
echo $ac_n "checking for XawScrollbarSetThumb in -l$athena_variant""... $ac_c" 1>&6
-echo "configure:8118: checking for XawScrollbarSetThumb in -l$athena_variant" >&5
+echo "configure:8194: checking for XawScrollbarSetThumb in -l$athena_variant" >&5
ac_lib_var=`echo $athena_variant'_'XawScrollbarSetThumb | sed 'y%./+-%__p_%'`
xe_check_libs=" -l$athena_variant "
cat > conftest.$ac_ext <<EOF
-#line 8123 "configure"
+#line 8199 "configure"
#include "confdefs.h"
/* Override any gcc2 internal prototype to avoid an error. */
/* We use char because int might match the return type of a gcc2
XawScrollbarSetThumb()
; return 0; }
EOF
-if { (eval echo configure:8134: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
+if { (eval echo configure:8210: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
rm -rf conftest*
eval "ac_cv_lib_$ac_lib_var=yes"
else
echo "$ac_t""yes" 1>&6
echo $ac_n "checking for threeDClassRec in -l$athena_variant""... $ac_c" 1>&6
-echo "configure:8150: checking for threeDClassRec in -l$athena_variant" >&5
+echo "configure:8226: checking for threeDClassRec in -l$athena_variant" >&5
ac_lib_var=`echo $athena_variant'_'threeDClassRec | sed 'y%./+-%__p_%'`
xe_check_libs=" -l$athena_variant "
cat > conftest.$ac_ext <<EOF
-#line 8155 "configure"
+#line 8231 "configure"
#include "confdefs.h"
/* Override any gcc2 internal prototype to avoid an error. */
/* We use char because int might match the return type of a gcc2
threeDClassRec()
; return 0; }
EOF
-if { (eval echo configure:8166: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
+if { (eval echo configure:8242: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
rm -rf conftest*
eval "ac_cv_lib_$ac_lib_var=yes"
else
else
echo $ac_n "checking for threeDClassRec in -l$athena_variant""... $ac_c" 1>&6
-echo "configure:8197: checking for threeDClassRec in -l$athena_variant" >&5
+echo "configure:8273: checking for threeDClassRec in -l$athena_variant" >&5
ac_lib_var=`echo $athena_variant'_'threeDClassRec | sed 'y%./+-%__p_%'`
xe_check_libs=" -l$athena_variant "
cat > conftest.$ac_ext <<EOF
-#line 8202 "configure"
+#line 8278 "configure"
#include "confdefs.h"
/* Override any gcc2 internal prototype to avoid an error. */
/* We use char because int might match the return type of a gcc2
threeDClassRec()
; return 0; }
EOF
-if { (eval echo configure:8213: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
+if { (eval echo configure:8289: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
rm -rf conftest*
eval "ac_cv_lib_$ac_lib_var=yes"
else
else
echo "$ac_t""no" 1>&6
echo $ac_n "checking for threeDClassRec in -lXaw""... $ac_c" 1>&6
-echo "configure:8231: checking for threeDClassRec in -lXaw" >&5
+echo "configure:8307: checking for threeDClassRec in -lXaw" >&5
ac_lib_var=`echo Xaw'_'threeDClassRec | sed 'y%./+-%__p_%'`
xe_check_libs=" -lXaw "
cat > conftest.$ac_ext <<EOF
-#line 8236 "configure"
+#line 8312 "configure"
#include "confdefs.h"
/* Override any gcc2 internal prototype to avoid an error. */
/* We use char because int might match the return type of a gcc2
threeDClassRec()
; return 0; }
EOF
-if { (eval echo configure:8247: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
+if { (eval echo configure:8323: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
rm -rf conftest*
eval "ac_cv_lib_$ac_lib_var=yes"
else
if test "$athena_3d" = "no"; then
ac_safe=`echo "X11/Xaw/ThreeD.h" | sed 'y%./+-%__p_%'`
echo $ac_n "checking for X11/Xaw/ThreeD.h""... $ac_c" 1>&6
-echo "configure:8278: checking for X11/Xaw/ThreeD.h" >&5
+echo "configure:8354: checking for X11/Xaw/ThreeD.h" >&5
cat > conftest.$ac_ext <<EOF
-#line 8281 "configure"
+#line 8357 "configure"
#include "confdefs.h"
#include <X11/Xaw/ThreeD.h>
EOF
ac_try="$ac_cpp conftest.$ac_ext >/dev/null 2>conftest.out"
-{ (eval echo configure:8286: \"$ac_try\") 1>&5; (eval $ac_try) 2>&5; }
+{ (eval echo configure:8362: \"$ac_try\") 1>&5; (eval $ac_try) 2>&5; }
ac_err=`grep -v '^ *+' conftest.out | grep -v "^conftest.${ac_ext}\$"`
if test -z "$ac_err"; then
rm -rf conftest*
echo "$ac_t""no" 1>&6
ac_safe=`echo "X11/Xaw/XawInit.h" | sed 'y%./+-%__p_%'`
echo $ac_n "checking for X11/Xaw/XawInit.h""... $ac_c" 1>&6
-echo "configure:8306: checking for X11/Xaw/XawInit.h" >&5
+echo "configure:8382: checking for X11/Xaw/XawInit.h" >&5
cat > conftest.$ac_ext <<EOF
-#line 8309 "configure"
+#line 8385 "configure"
#include "confdefs.h"
#include <X11/Xaw/XawInit.h>
EOF
ac_try="$ac_cpp conftest.$ac_ext >/dev/null 2>conftest.out"
-{ (eval echo configure:8314: \"$ac_try\") 1>&5; (eval $ac_try) 2>&5; }
+{ (eval echo configure:8390: \"$ac_try\") 1>&5; (eval $ac_try) 2>&5; }
ac_err=`grep -v '^ *+' conftest.out | grep -v "^conftest.${ac_ext}\$"`
if test -z "$ac_err"; then
rm -rf conftest*
else
ac_safe=`echo "X11/$athena_variant/XawInit.h" | sed 'y%./+-%__p_%'`
echo $ac_n "checking for X11/$athena_variant/XawInit.h""... $ac_c" 1>&6
-echo "configure:8340: checking for X11/$athena_variant/XawInit.h" >&5
+echo "configure:8416: checking for X11/$athena_variant/XawInit.h" >&5
cat > conftest.$ac_ext <<EOF
-#line 8343 "configure"
+#line 8419 "configure"
#include "confdefs.h"
#include <X11/$athena_variant/XawInit.h>
EOF
ac_try="$ac_cpp conftest.$ac_ext >/dev/null 2>conftest.out"
-{ (eval echo configure:8348: \"$ac_try\") 1>&5; (eval $ac_try) 2>&5; }
+{ (eval echo configure:8424: \"$ac_try\") 1>&5; (eval $ac_try) 2>&5; }
ac_err=`grep -v '^ *+' conftest.out | grep -v "^conftest.${ac_ext}\$"`
if test -z "$ac_err"; then
rm -rf conftest*
echo "$ac_t""yes" 1>&6
ac_safe=`echo "X11/$athena_variant/ThreeD.h" | sed 'y%./+-%__p_%'`
echo $ac_n "checking for X11/$athena_variant/ThreeD.h""... $ac_c" 1>&6
-echo "configure:8365: checking for X11/$athena_variant/ThreeD.h" >&5
+echo "configure:8441: checking for X11/$athena_variant/ThreeD.h" >&5
cat > conftest.$ac_ext <<EOF
-#line 8368 "configure"
+#line 8444 "configure"
#include "confdefs.h"
#include <X11/$athena_variant/ThreeD.h>
EOF
ac_try="$ac_cpp conftest.$ac_ext >/dev/null 2>conftest.out"
-{ (eval echo configure:8373: \"$ac_try\") 1>&5; (eval $ac_try) 2>&5; }
+{ (eval echo configure:8449: \"$ac_try\") 1>&5; (eval $ac_try) 2>&5; }
ac_err=`grep -v '^ *+' conftest.out | grep -v "^conftest.${ac_ext}\$"`
if test -z "$ac_err"; then
rm -rf conftest*
if test -z "$athena_h_path"; then
ac_safe=`echo "$athena_variant/XawInit.h" | sed 'y%./+-%__p_%'`
echo $ac_n "checking for $athena_variant/XawInit.h""... $ac_c" 1>&6
-echo "configure:8401: checking for $athena_variant/XawInit.h" >&5
+echo "configure:8477: checking for $athena_variant/XawInit.h" >&5
cat > conftest.$ac_ext <<EOF
-#line 8404 "configure"
+#line 8480 "configure"
#include "confdefs.h"
#include <$athena_variant/XawInit.h>
EOF
ac_try="$ac_cpp conftest.$ac_ext >/dev/null 2>conftest.out"
-{ (eval echo configure:8409: \"$ac_try\") 1>&5; (eval $ac_try) 2>&5; }
+{ (eval echo configure:8485: \"$ac_try\") 1>&5; (eval $ac_try) 2>&5; }
ac_err=`grep -v '^ *+' conftest.out | grep -v "^conftest.${ac_ext}\$"`
if test -z "$ac_err"; then
rm -rf conftest*
echo "$ac_t""yes" 1>&6
ac_safe=`echo "$athena_variant/ThreeD.h" | sed 'y%./+-%__p_%'`
echo $ac_n "checking for $athena_variant/ThreeD.h""... $ac_c" 1>&6
-echo "configure:8426: checking for $athena_variant/ThreeD.h" >&5
+echo "configure:8502: checking for $athena_variant/ThreeD.h" >&5
cat > conftest.$ac_ext <<EOF
-#line 8429 "configure"
+#line 8505 "configure"
#include "confdefs.h"
#include <$athena_variant/ThreeD.h>
EOF
ac_try="$ac_cpp conftest.$ac_ext >/dev/null 2>conftest.out"
-{ (eval echo configure:8434: \"$ac_try\") 1>&5; (eval $ac_try) 2>&5; }
+{ (eval echo configure:8510: \"$ac_try\") 1>&5; (eval $ac_try) 2>&5; }
ac_err=`grep -v '^ *+' conftest.out | grep -v "^conftest.${ac_ext}\$"`
if test -z "$ac_err"; then
rm -rf conftest*
if test -z "$athena_h_path" -a "$athena_variant" != "Xaw3d"; then
ac_safe=`echo "X11/Xaw3d/XawInit.h" | sed 'y%./+-%__p_%'`
echo $ac_n "checking for X11/Xaw3d/XawInit.h""... $ac_c" 1>&6
-echo "configure:8463: checking for X11/Xaw3d/XawInit.h" >&5
+echo "configure:8539: checking for X11/Xaw3d/XawInit.h" >&5
cat > conftest.$ac_ext <<EOF
-#line 8466 "configure"
+#line 8542 "configure"
#include "confdefs.h"
#include <X11/Xaw3d/XawInit.h>
EOF
ac_try="$ac_cpp conftest.$ac_ext >/dev/null 2>conftest.out"
-{ (eval echo configure:8471: \"$ac_try\") 1>&5; (eval $ac_try) 2>&5; }
+{ (eval echo configure:8547: \"$ac_try\") 1>&5; (eval $ac_try) 2>&5; }
ac_err=`grep -v '^ *+' conftest.out | grep -v "^conftest.${ac_ext}\$"`
if test -z "$ac_err"; then
rm -rf conftest*
echo "$ac_t""yes" 1>&6
ac_safe=`echo "X11/Xaw3d/ThreeD.h" | sed 'y%./+-%__p_%'`
echo $ac_n "checking for X11/Xaw3d/ThreeD.h""... $ac_c" 1>&6
-echo "configure:8488: checking for X11/Xaw3d/ThreeD.h" >&5
+echo "configure:8564: checking for X11/Xaw3d/ThreeD.h" >&5
cat > conftest.$ac_ext <<EOF
-#line 8491 "configure"
+#line 8567 "configure"
#include "confdefs.h"
#include <X11/Xaw3d/ThreeD.h>
EOF
ac_try="$ac_cpp conftest.$ac_ext >/dev/null 2>conftest.out"
-{ (eval echo configure:8496: \"$ac_try\") 1>&5; (eval $ac_try) 2>&5; }
+{ (eval echo configure:8572: \"$ac_try\") 1>&5; (eval $ac_try) 2>&5; }
ac_err=`grep -v '^ *+' conftest.out | grep -v "^conftest.${ac_ext}\$"`
if test -z "$ac_err"; then
rm -rf conftest*
if test -z "$athena_h_path" -a "$athena_variant" != "Xaw3d"; then
ac_safe=`echo "Xaw3d/XawInit.h" | sed 'y%./+-%__p_%'`
echo $ac_n "checking for Xaw3d/XawInit.h""... $ac_c" 1>&6
-echo "configure:8528: checking for Xaw3d/XawInit.h" >&5
+echo "configure:8604: checking for Xaw3d/XawInit.h" >&5
cat > conftest.$ac_ext <<EOF
-#line 8531 "configure"
+#line 8607 "configure"
#include "confdefs.h"
#include <Xaw3d/XawInit.h>
EOF
ac_try="$ac_cpp conftest.$ac_ext >/dev/null 2>conftest.out"
-{ (eval echo configure:8536: \"$ac_try\") 1>&5; (eval $ac_try) 2>&5; }
+{ (eval echo configure:8612: \"$ac_try\") 1>&5; (eval $ac_try) 2>&5; }
ac_err=`grep -v '^ *+' conftest.out | grep -v "^conftest.${ac_ext}\$"`
if test -z "$ac_err"; then
rm -rf conftest*
echo "$ac_t""yes" 1>&6
ac_safe=`echo "Xaw3d/ThreeD.h" | sed 'y%./+-%__p_%'`
echo $ac_n "checking for Xaw3d/ThreeD.h""... $ac_c" 1>&6
-echo "configure:8553: checking for Xaw3d/ThreeD.h" >&5
+echo "configure:8629: checking for Xaw3d/ThreeD.h" >&5
cat > conftest.$ac_ext <<EOF
-#line 8556 "configure"
+#line 8632 "configure"
#include "confdefs.h"
#include <Xaw3d/ThreeD.h>
EOF
ac_try="$ac_cpp conftest.$ac_ext >/dev/null 2>conftest.out"
-{ (eval echo configure:8561: \"$ac_try\") 1>&5; (eval $ac_try) 2>&5; }
+{ (eval echo configure:8637: \"$ac_try\") 1>&5; (eval $ac_try) 2>&5; }
ac_err=`grep -v '^ *+' conftest.out | grep -v "^conftest.${ac_ext}\$"`
if test -z "$ac_err"; then
rm -rf conftest*
if test -z "$athena_h_path"; then
ac_safe=`echo "X11/Xaw/ThreeD.h" | sed 'y%./+-%__p_%'`
echo $ac_n "checking for X11/Xaw/ThreeD.h""... $ac_c" 1>&6
-echo "configure:8593: checking for X11/Xaw/ThreeD.h" >&5
+echo "configure:8669: checking for X11/Xaw/ThreeD.h" >&5
cat > conftest.$ac_ext <<EOF
-#line 8596 "configure"
+#line 8672 "configure"
#include "confdefs.h"
#include <X11/Xaw/ThreeD.h>
EOF
ac_try="$ac_cpp conftest.$ac_ext >/dev/null 2>conftest.out"
-{ (eval echo configure:8601: \"$ac_try\") 1>&5; (eval $ac_try) 2>&5; }
+{ (eval echo configure:8677: \"$ac_try\") 1>&5; (eval $ac_try) 2>&5; }
ac_err=`grep -v '^ *+' conftest.out | grep -v "^conftest.${ac_ext}\$"`
if test -z "$ac_err"; then
rm -rf conftest*
ac_safe=`echo "Xm/Xm.h" | sed 'y%./+-%__p_%'`
echo $ac_n "checking for Xm/Xm.h""... $ac_c" 1>&6
-echo "configure:8636: checking for Xm/Xm.h" >&5
+echo "configure:8712: checking for Xm/Xm.h" >&5
cat > conftest.$ac_ext <<EOF
-#line 8639 "configure"
+#line 8715 "configure"
#include "confdefs.h"
#include <Xm/Xm.h>
EOF
ac_try="$ac_cpp conftest.$ac_ext >/dev/null 2>conftest.out"
-{ (eval echo configure:8644: \"$ac_try\") 1>&5; (eval $ac_try) 2>&5; }
+{ (eval echo configure:8720: \"$ac_try\") 1>&5; (eval $ac_try) 2>&5; }
ac_err=`grep -v '^ *+' conftest.out | grep -v "^conftest.${ac_ext}\$"`
if test -z "$ac_err"; then
rm -rf conftest*
echo "$ac_t""yes" 1>&6
echo $ac_n "checking for XmStringFree in -lXm""... $ac_c" 1>&6
-echo "configure:8661: checking for XmStringFree in -lXm" >&5
+echo "configure:8737: checking for XmStringFree in -lXm" >&5
ac_lib_var=`echo Xm'_'XmStringFree | sed 'y%./+-%__p_%'`
xe_check_libs=" -lXm "
cat > conftest.$ac_ext <<EOF
-#line 8666 "configure"
+#line 8742 "configure"
#include "confdefs.h"
/* Override any gcc2 internal prototype to avoid an error. */
/* We use char because int might match the return type of a gcc2
XmStringFree()
; return 0; }
EOF
-if { (eval echo configure:8677: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
+if { (eval echo configure:8753: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
rm -rf conftest*
eval "ac_cv_lib_$ac_lib_var=yes"
else
if test "$have_motif" = "yes"; then
echo $ac_n "checking for Lesstif""... $ac_c" 1>&6
-echo "configure:8706: checking for Lesstif" >&5
+echo "configure:8782: checking for Lesstif" >&5
cat > conftest.$ac_ext <<EOF
-#line 8708 "configure"
+#line 8784 "configure"
#include "confdefs.h"
#include <Xm/Xm.h>
#ifdef LESSTIF_VERSION
if test "$with_mule" = "yes" ; then
echo "checking for Mule-related features" 1>&6
-echo "configure:9114: checking for Mule-related features" >&5
+echo "configure:9190: checking for Mule-related features" >&5
{ test "$extra_verbose" = "yes" && cat << \EOF
Defining MULE
EOF
do
ac_safe=`echo "$ac_hdr" | sed 'y%./+-%__p_%'`
echo $ac_n "checking for $ac_hdr""... $ac_c" 1>&6
-echo "configure:9139: checking for $ac_hdr" >&5
+echo "configure:9215: checking for $ac_hdr" >&5
cat > conftest.$ac_ext <<EOF
-#line 9142 "configure"
+#line 9218 "configure"
#include "confdefs.h"
#include <$ac_hdr>
EOF
ac_try="$ac_cpp conftest.$ac_ext >/dev/null 2>conftest.out"
-{ (eval echo configure:9147: \"$ac_try\") 1>&5; (eval $ac_try) 2>&5; }
+{ (eval echo configure:9223: \"$ac_try\") 1>&5; (eval $ac_try) 2>&5; }
ac_err=`grep -v '^ *+' conftest.out | grep -v "^conftest.${ac_ext}\$"`
if test -z "$ac_err"; then
rm -rf conftest*
echo $ac_n "checking for strerror in -lintl""... $ac_c" 1>&6
-echo "configure:9178: checking for strerror in -lintl" >&5
+echo "configure:9254: checking for strerror in -lintl" >&5
ac_lib_var=`echo intl'_'strerror | sed 'y%./+-%__p_%'`
xe_check_libs=" -lintl "
cat > conftest.$ac_ext <<EOF
-#line 9183 "configure"
+#line 9259 "configure"
#include "confdefs.h"
/* Override any gcc2 internal prototype to avoid an error. */
/* We use char because int might match the return type of a gcc2
strerror()
; return 0; }
EOF
-if { (eval echo configure:9194: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
+if { (eval echo configure:9270: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
rm -rf conftest*
eval "ac_cv_lib_$ac_lib_var=yes"
else
echo "checking for Mule input methods" 1>&6
-echo "configure:9227: checking for Mule input methods" >&5
+echo "configure:9303: checking for Mule input methods" >&5
case "$with_xim" in "" | "yes" )
echo "checking for XIM" 1>&6
-echo "configure:9230: checking for XIM" >&5
+echo "configure:9306: checking for XIM" >&5
echo $ac_n "checking for XOpenIM in -lX11""... $ac_c" 1>&6
-echo "configure:9233: checking for XOpenIM in -lX11" >&5
+echo "configure:9309: checking for XOpenIM in -lX11" >&5
ac_lib_var=`echo X11'_'XOpenIM | sed 'y%./+-%__p_%'`
xe_check_libs=" -lX11 "
cat > conftest.$ac_ext <<EOF
-#line 9238 "configure"
+#line 9314 "configure"
#include "confdefs.h"
/* Override any gcc2 internal prototype to avoid an error. */
/* We use char because int might match the return type of a gcc2
XOpenIM()
; return 0; }
EOF
-if { (eval echo configure:9249: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
+if { (eval echo configure:9325: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
rm -rf conftest*
eval "ac_cv_lib_$ac_lib_var=yes"
else
if test "$have_motif $have_lesstif" = "yes no"; then
echo $ac_n "checking for XmImMbLookupString in -lXm""... $ac_c" 1>&6
-echo "configure:9273: checking for XmImMbLookupString in -lXm" >&5
+echo "configure:9349: checking for XmImMbLookupString in -lXm" >&5
ac_lib_var=`echo Xm'_'XmImMbLookupString | sed 'y%./+-%__p_%'`
xe_check_libs=" -lXm "
cat > conftest.$ac_ext <<EOF
-#line 9278 "configure"
+#line 9354 "configure"
#include "confdefs.h"
/* Override any gcc2 internal prototype to avoid an error. */
/* We use char because int might match the return type of a gcc2
XmImMbLookupString()
; return 0; }
EOF
-if { (eval echo configure:9289: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
+if { (eval echo configure:9365: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
rm -rf conftest*
eval "ac_cv_lib_$ac_lib_var=yes"
else
if test "$with_xfs" = "yes" ; then
echo "checking for XFontSet" 1>&6
-echo "configure:9354: checking for XFontSet" >&5
+echo "configure:9430: checking for XFontSet" >&5
echo $ac_n "checking for XmbDrawString in -lX11""... $ac_c" 1>&6
-echo "configure:9357: checking for XmbDrawString in -lX11" >&5
+echo "configure:9433: checking for XmbDrawString in -lX11" >&5
ac_lib_var=`echo X11'_'XmbDrawString | sed 'y%./+-%__p_%'`
xe_check_libs=" -lX11 "
cat > conftest.$ac_ext <<EOF
-#line 9362 "configure"
+#line 9438 "configure"
#include "confdefs.h"
/* Override any gcc2 internal prototype to avoid an error. */
/* We use char because int might match the return type of a gcc2
XmbDrawString()
; return 0; }
EOF
-if { (eval echo configure:9373: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
+if { (eval echo configure:9449: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
rm -rf conftest*
eval "ac_cv_lib_$ac_lib_var=yes"
else
test "$with_wnn6" = "yes" && with_wnn=yes # wnn6 implies wnn support
test -z "$with_wnn" && { ac_safe=`echo "wnn/jllib.h" | sed 'y%./+-%__p_%'`
echo $ac_n "checking for wnn/jllib.h""... $ac_c" 1>&6
-echo "configure:9413: checking for wnn/jllib.h" >&5
+echo "configure:9489: checking for wnn/jllib.h" >&5
cat > conftest.$ac_ext <<EOF
-#line 9416 "configure"
+#line 9492 "configure"
#include "confdefs.h"
#include <wnn/jllib.h>
EOF
ac_try="$ac_cpp conftest.$ac_ext >/dev/null 2>conftest.out"
-{ (eval echo configure:9421: \"$ac_try\") 1>&5; (eval $ac_try) 2>&5; }
+{ (eval echo configure:9497: \"$ac_try\") 1>&5; (eval $ac_try) 2>&5; }
ac_err=`grep -v '^ *+' conftest.out | grep -v "^conftest.${ac_ext}\$"`
if test -z "$ac_err"; then
rm -rf conftest*
for ac_func in crypt
do
echo $ac_n "checking for $ac_func""... $ac_c" 1>&6
-echo "configure:9446: checking for $ac_func" >&5
+echo "configure:9522: checking for $ac_func" >&5
cat > conftest.$ac_ext <<EOF
-#line 9449 "configure"
+#line 9525 "configure"
#include "confdefs.h"
/* System header to define __stub macros and hopefully few prototypes,
which can conflict with char $ac_func(); below. */
; return 0; }
EOF
-if { (eval echo configure:9472: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
+if { (eval echo configure:9548: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
rm -rf conftest*
eval "ac_cv_func_$ac_func=yes"
else
test "$ac_cv_func_crypt" != "yes" && {
echo $ac_n "checking for crypt in -lcrypt""... $ac_c" 1>&6
-echo "configure:9501: checking for crypt in -lcrypt" >&5
+echo "configure:9577: checking for crypt in -lcrypt" >&5
ac_lib_var=`echo crypt'_'crypt | sed 'y%./+-%__p_%'`
xe_check_libs=" -lcrypt "
cat > conftest.$ac_ext <<EOF
-#line 9506 "configure"
+#line 9582 "configure"
#include "confdefs.h"
/* Override any gcc2 internal prototype to avoid an error. */
/* We use char because int might match the return type of a gcc2
crypt()
; return 0; }
EOF
-if { (eval echo configure:9517: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
+if { (eval echo configure:9593: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
rm -rf conftest*
eval "ac_cv_lib_$ac_lib_var=yes"
else
if test -z "$with_wnn" -o "$with_wnn" = "yes"; then
echo $ac_n "checking for jl_dic_list_e in -lwnn""... $ac_c" 1>&6
-echo "configure:9552: checking for jl_dic_list_e in -lwnn" >&5
+echo "configure:9628: checking for jl_dic_list_e in -lwnn" >&5
ac_lib_var=`echo wnn'_'jl_dic_list_e | sed 'y%./+-%__p_%'`
xe_check_libs=" -lwnn "
cat > conftest.$ac_ext <<EOF
-#line 9557 "configure"
+#line 9633 "configure"
#include "confdefs.h"
/* Override any gcc2 internal prototype to avoid an error. */
/* We use char because int might match the return type of a gcc2
jl_dic_list_e()
; return 0; }
EOF
-if { (eval echo configure:9568: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
+if { (eval echo configure:9644: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
rm -rf conftest*
eval "ac_cv_lib_$ac_lib_var=yes"
else
else
echo "$ac_t""no" 1>&6
echo $ac_n "checking for jl_dic_list_e in -lwnn4""... $ac_c" 1>&6
-echo "configure:9586: checking for jl_dic_list_e in -lwnn4" >&5
+echo "configure:9662: checking for jl_dic_list_e in -lwnn4" >&5
ac_lib_var=`echo wnn4'_'jl_dic_list_e | sed 'y%./+-%__p_%'`
xe_check_libs=" -lwnn4 "
cat > conftest.$ac_ext <<EOF
-#line 9591 "configure"
+#line 9667 "configure"
#include "confdefs.h"
/* Override any gcc2 internal prototype to avoid an error. */
/* We use char because int might match the return type of a gcc2
jl_dic_list_e()
; return 0; }
EOF
-if { (eval echo configure:9602: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
+if { (eval echo configure:9678: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
rm -rf conftest*
eval "ac_cv_lib_$ac_lib_var=yes"
else
else
echo "$ac_t""no" 1>&6
echo $ac_n "checking for jl_dic_list_e in -lwnn6""... $ac_c" 1>&6
-echo "configure:9620: checking for jl_dic_list_e in -lwnn6" >&5
+echo "configure:9696: checking for jl_dic_list_e in -lwnn6" >&5
ac_lib_var=`echo wnn6'_'jl_dic_list_e | sed 'y%./+-%__p_%'`
xe_check_libs=" -lwnn6 "
cat > conftest.$ac_ext <<EOF
-#line 9625 "configure"
+#line 9701 "configure"
#include "confdefs.h"
/* Override any gcc2 internal prototype to avoid an error. */
/* We use char because int might match the return type of a gcc2
jl_dic_list_e()
; return 0; }
EOF
-if { (eval echo configure:9636: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
+if { (eval echo configure:9712: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
rm -rf conftest*
eval "ac_cv_lib_$ac_lib_var=yes"
else
else
echo "$ac_t""no" 1>&6
echo $ac_n "checking for dic_list_e in -lwnn6_fromsrc""... $ac_c" 1>&6
-echo "configure:9654: checking for dic_list_e in -lwnn6_fromsrc" >&5
+echo "configure:9730: checking for dic_list_e in -lwnn6_fromsrc" >&5
ac_lib_var=`echo wnn6_fromsrc'_'dic_list_e | sed 'y%./+-%__p_%'`
xe_check_libs=" -lwnn6_fromsrc "
cat > conftest.$ac_ext <<EOF
-#line 9659 "configure"
+#line 9735 "configure"
#include "confdefs.h"
/* Override any gcc2 internal prototype to avoid an error. */
/* We use char because int might match the return type of a gcc2
dic_list_e()
; return 0; }
EOF
-if { (eval echo configure:9670: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
+if { (eval echo configure:9746: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
rm -rf conftest*
eval "ac_cv_lib_$ac_lib_var=yes"
else
if test "$with_wnn6" != "no"; then
echo $ac_n "checking for jl_fi_dic_list in -l$libwnn""... $ac_c" 1>&6
-echo "configure:9718: checking for jl_fi_dic_list in -l$libwnn" >&5
+echo "configure:9794: checking for jl_fi_dic_list in -l$libwnn" >&5
ac_lib_var=`echo $libwnn'_'jl_fi_dic_list | sed 'y%./+-%__p_%'`
xe_check_libs=" -l$libwnn "
cat > conftest.$ac_ext <<EOF
-#line 9723 "configure"
+#line 9799 "configure"
#include "confdefs.h"
/* Override any gcc2 internal prototype to avoid an error. */
/* We use char because int might match the return type of a gcc2
jl_fi_dic_list()
; return 0; }
EOF
-if { (eval echo configure:9734: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
+if { (eval echo configure:9810: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
rm -rf conftest*
eval "ac_cv_lib_$ac_lib_var=yes"
else
if test "$with_canna" != "no"; then
ac_safe=`echo "canna/jrkanji.h" | sed 'y%./+-%__p_%'`
echo $ac_n "checking for canna/jrkanji.h""... $ac_c" 1>&6
-echo "configure:9769: checking for canna/jrkanji.h" >&5
+echo "configure:9845: checking for canna/jrkanji.h" >&5
cat > conftest.$ac_ext <<EOF
-#line 9772 "configure"
+#line 9848 "configure"
#include "confdefs.h"
#include <canna/jrkanji.h>
EOF
ac_try="$ac_cpp conftest.$ac_ext >/dev/null 2>conftest.out"
-{ (eval echo configure:9777: \"$ac_try\") 1>&5; (eval $ac_try) 2>&5; }
+{ (eval echo configure:9853: \"$ac_try\") 1>&5; (eval $ac_try) 2>&5; }
ac_err=`grep -v '^ *+' conftest.out | grep -v "^conftest.${ac_ext}\$"`
if test -z "$ac_err"; then
rm -rf conftest*
c_switch_site="$c_switch_site -I/usr/local/canna/include"
ac_safe=`echo "canna/jrkanji.h" | sed 'y%./+-%__p_%'`
echo $ac_n "checking for canna/jrkanji.h""... $ac_c" 1>&6
-echo "configure:9804: checking for canna/jrkanji.h" >&5
+echo "configure:9880: checking for canna/jrkanji.h" >&5
cat > conftest.$ac_ext <<EOF
-#line 9807 "configure"
+#line 9883 "configure"
#include "confdefs.h"
#include <canna/jrkanji.h>
EOF
ac_try="$ac_cpp conftest.$ac_ext >/dev/null 2>conftest.out"
-{ (eval echo configure:9812: \"$ac_try\") 1>&5; (eval $ac_try) 2>&5; }
+{ (eval echo configure:9888: \"$ac_try\") 1>&5; (eval $ac_try) 2>&5; }
ac_err=`grep -v '^ *+' conftest.out | grep -v "^conftest.${ac_ext}\$"`
if test -z "$ac_err"; then
rm -rf conftest*
test -z "$with_canna" && { ac_safe=`echo "canna/RK.h" | sed 'y%./+-%__p_%'`
echo $ac_n "checking for canna/RK.h""... $ac_c" 1>&6
-echo "configure:9840: checking for canna/RK.h" >&5
+echo "configure:9916: checking for canna/RK.h" >&5
cat > conftest.$ac_ext <<EOF
-#line 9843 "configure"
+#line 9919 "configure"
#include "confdefs.h"
#include <canna/RK.h>
EOF
ac_try="$ac_cpp conftest.$ac_ext >/dev/null 2>conftest.out"
-{ (eval echo configure:9848: \"$ac_try\") 1>&5; (eval $ac_try) 2>&5; }
+{ (eval echo configure:9924: \"$ac_try\") 1>&5; (eval $ac_try) 2>&5; }
ac_err=`grep -v '^ *+' conftest.out | grep -v "^conftest.${ac_ext}\$"`
if test -z "$ac_err"; then
rm -rf conftest*
}
test -z "$with_canna" && {
echo $ac_n "checking for RkBgnBun in -lRKC""... $ac_c" 1>&6
-echo "configure:9871: checking for RkBgnBun in -lRKC" >&5
+echo "configure:9947: checking for RkBgnBun in -lRKC" >&5
ac_lib_var=`echo RKC'_'RkBgnBun | sed 'y%./+-%__p_%'`
xe_check_libs=" -lRKC "
cat > conftest.$ac_ext <<EOF
-#line 9876 "configure"
+#line 9952 "configure"
#include "confdefs.h"
/* Override any gcc2 internal prototype to avoid an error. */
/* We use char because int might match the return type of a gcc2
RkBgnBun()
; return 0; }
EOF
-if { (eval echo configure:9887: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
+if { (eval echo configure:9963: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
rm -rf conftest*
eval "ac_cv_lib_$ac_lib_var=yes"
else
}
test -z "$with_canna" && {
echo $ac_n "checking for jrKanjiControl in -lcanna""... $ac_c" 1>&6
-echo "configure:9910: checking for jrKanjiControl in -lcanna" >&5
+echo "configure:9986: checking for jrKanjiControl in -lcanna" >&5
ac_lib_var=`echo canna'_'jrKanjiControl | sed 'y%./+-%__p_%'`
xe_check_libs=" -lcanna "
cat > conftest.$ac_ext <<EOF
-#line 9915 "configure"
+#line 9991 "configure"
#include "confdefs.h"
/* Override any gcc2 internal prototype to avoid an error. */
/* We use char because int might match the return type of a gcc2
jrKanjiControl()
; return 0; }
EOF
-if { (eval echo configure:9926: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
+if { (eval echo configure:10002: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
rm -rf conftest*
eval "ac_cv_lib_$ac_lib_var=yes"
else
libs_x="-lXm $libs_x" && if test "$extra_verbose" = "yes"; then echo " Prepending \"-lXm\" to \$libs_x"; fi
echo $ac_n "checking for layout_object_getvalue in -li18n""... $ac_c" 1>&6
-echo "configure:9975: checking for layout_object_getvalue in -li18n" >&5
+echo "configure:10051: checking for layout_object_getvalue in -li18n" >&5
ac_lib_var=`echo i18n'_'layout_object_getvalue | sed 'y%./+-%__p_%'`
xe_check_libs=" -li18n "
cat > conftest.$ac_ext <<EOF
-#line 9980 "configure"
+#line 10056 "configure"
#include "confdefs.h"
/* Override any gcc2 internal prototype to avoid an error. */
/* We use char because int might match the return type of a gcc2
layout_object_getvalue()
; return 0; }
EOF
-if { (eval echo configure:9991: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
+if { (eval echo configure:10067: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
rm -rf conftest*
eval "ac_cv_lib_$ac_lib_var=yes"
else
for ac_func in cbrt closedir dup2 eaccess fmod fpathconf frexp ftime getaddrinfo gethostname getnameinfo getpagesize gettimeofday getcwd getwd logb lrand48 matherr mkdir mktime perror poll random rename res_init rint rmdir select setitimer setpgid setlocale setsid sigblock sighold sigprocmask snprintf stpcpy strerror tzset ulimit usleep utimes waitpid vsnprintf fsync ftruncate umask
do
echo $ac_n "checking for $ac_func""... $ac_c" 1>&6
-echo "configure:10077: checking for $ac_func" >&5
+echo "configure:10153: checking for $ac_func" >&5
cat > conftest.$ac_ext <<EOF
-#line 10080 "configure"
+#line 10156 "configure"
#include "confdefs.h"
/* System header to define __stub macros and hopefully few prototypes,
which can conflict with char $ac_func(); below. */
; return 0; }
EOF
-if { (eval echo configure:10103: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
+if { (eval echo configure:10179: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
rm -rf conftest*
eval "ac_cv_func_$ac_func=yes"
else
done
-for ac_func in getpt _getpt grantpt unlockpt ptsname killpg tcgetpgrp
+for ac_func in getpt _getpty grantpt unlockpt ptsname killpg tcgetpgrp
do
echo $ac_n "checking for $ac_func""... $ac_c" 1>&6
-echo "configure:10134: checking for $ac_func" >&5
+echo "configure:10210: checking for $ac_func" >&5
cat > conftest.$ac_ext <<EOF
-#line 10137 "configure"
+#line 10213 "configure"
#include "confdefs.h"
/* System header to define __stub macros and hopefully few prototypes,
which can conflict with char $ac_func(); below. */
; return 0; }
EOF
-if { (eval echo configure:10160: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
+if { (eval echo configure:10236: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
rm -rf conftest*
eval "ac_cv_func_$ac_func=yes"
else
echo $ac_n "checking for openpty""... $ac_c" 1>&6
-echo "configure:10189: checking for openpty" >&5
+echo "configure:10265: checking for openpty" >&5
cat > conftest.$ac_ext <<EOF
-#line 10192 "configure"
+#line 10268 "configure"
#include "confdefs.h"
/* System header to define __stub macros and hopefully few prototypes,
which can conflict with char openpty(); below. */
; return 0; }
EOF
-if { (eval echo configure:10215: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
+if { (eval echo configure:10291: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
rm -rf conftest*
eval "ac_cv_func_openpty=yes"
else
echo $ac_n "checking for openpty in -lutil""... $ac_c" 1>&6
-echo "configure:10234: checking for openpty in -lutil" >&5
+echo "configure:10310: checking for openpty in -lutil" >&5
ac_lib_var=`echo util'_'openpty | sed 'y%./+-%__p_%'`
xe_check_libs=" -lutil "
cat > conftest.$ac_ext <<EOF
-#line 10239 "configure"
+#line 10315 "configure"
#include "confdefs.h"
/* Override any gcc2 internal prototype to avoid an error. */
/* We use char because int might match the return type of a gcc2
openpty()
; return 0; }
EOF
-if { (eval echo configure:10250: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
+if { (eval echo configure:10326: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
rm -rf conftest*
eval "ac_cv_lib_$ac_lib_var=yes"
else
do
ac_safe=`echo "$ac_hdr" | sed 'y%./+-%__p_%'`
echo $ac_n "checking for $ac_hdr""... $ac_c" 1>&6
-echo "configure:10285: checking for $ac_hdr" >&5
+echo "configure:10361: checking for $ac_hdr" >&5
cat > conftest.$ac_ext <<EOF
-#line 10288 "configure"
+#line 10364 "configure"
#include "confdefs.h"
#include <$ac_hdr>
EOF
ac_try="$ac_cpp conftest.$ac_ext >/dev/null 2>conftest.out"
-{ (eval echo configure:10293: \"$ac_try\") 1>&5; (eval $ac_try) 2>&5; }
+{ (eval echo configure:10369: \"$ac_try\") 1>&5; (eval $ac_try) 2>&5; }
ac_err=`grep -v '^ *+' conftest.out | grep -v "^conftest.${ac_ext}\$"`
if test -z "$ac_err"; then
rm -rf conftest*
test "$need_libutil" = "yes" && libs_system="$libs_system -lutil" && if test "$extra_verbose" = "yes"; then echo " Appending \"-lutil\" to \$libs_system"; fi
fi
-for ac_hdr in sys/stropts.h
+for ac_hdr in stropts.h
do
ac_safe=`echo "$ac_hdr" | sed 'y%./+-%__p_%'`
echo $ac_n "checking for $ac_hdr""... $ac_c" 1>&6
-echo "configure:10329: checking for $ac_hdr" >&5
+echo "configure:10405: checking for $ac_hdr" >&5
cat > conftest.$ac_ext <<EOF
-#line 10332 "configure"
+#line 10408 "configure"
#include "confdefs.h"
#include <$ac_hdr>
EOF
ac_try="$ac_cpp conftest.$ac_ext >/dev/null 2>conftest.out"
-{ (eval echo configure:10337: \"$ac_try\") 1>&5; (eval $ac_try) 2>&5; }
+{ (eval echo configure:10413: \"$ac_try\") 1>&5; (eval $ac_try) 2>&5; }
ac_err=`grep -v '^ *+' conftest.out | grep -v "^conftest.${ac_ext}\$"`
if test -z "$ac_err"; then
rm -rf conftest*
fi
done
-if test "$ac_cv_header_sys_stropts_h" = "yes"; then
+if test "$ac_cv_header_stropts_h" = "yes"; then
for ac_func in isastream
do
echo $ac_n "checking for $ac_func""... $ac_c" 1>&6
-echo "configure:10370: checking for $ac_func" >&5
+echo "configure:10446: checking for $ac_func" >&5
cat > conftest.$ac_ext <<EOF
-#line 10373 "configure"
+#line 10449 "configure"
#include "confdefs.h"
/* System header to define __stub macros and hopefully few prototypes,
which can conflict with char $ac_func(); below. */
; return 0; }
EOF
-if { (eval echo configure:10396: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
+if { (eval echo configure:10472: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
rm -rf conftest*
eval "ac_cv_func_$ac_func=yes"
else
fi
done
- for ac_hdr in sys/strtio.h
+ for ac_hdr in strtio.h
do
ac_safe=`echo "$ac_hdr" | sed 'y%./+-%__p_%'`
echo $ac_n "checking for $ac_hdr""... $ac_c" 1>&6
-echo "configure:10427: checking for $ac_hdr" >&5
+echo "configure:10503: checking for $ac_hdr" >&5
cat > conftest.$ac_ext <<EOF
-#line 10430 "configure"
+#line 10506 "configure"
#include "confdefs.h"
#include <$ac_hdr>
EOF
ac_try="$ac_cpp conftest.$ac_ext >/dev/null 2>conftest.out"
-{ (eval echo configure:10435: \"$ac_try\") 1>&5; (eval $ac_try) 2>&5; }
+{ (eval echo configure:10511: \"$ac_try\") 1>&5; (eval $ac_try) 2>&5; }
ac_err=`grep -v '^ *+' conftest.out | grep -v "^conftest.${ac_ext}\$"`
if test -z "$ac_err"; then
rm -rf conftest*
for ac_func in getloadavg
do
echo $ac_n "checking for $ac_func""... $ac_c" 1>&6
-echo "configure:10472: checking for $ac_func" >&5
+echo "configure:10548: checking for $ac_func" >&5
cat > conftest.$ac_ext <<EOF
-#line 10475 "configure"
+#line 10551 "configure"
#include "confdefs.h"
/* System header to define __stub macros and hopefully few prototypes,
which can conflict with char $ac_func(); below. */
; return 0; }
EOF
-if { (eval echo configure:10498: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
+if { (eval echo configure:10574: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
rm -rf conftest*
eval "ac_cv_func_$ac_func=yes"
else
do
ac_safe=`echo "$ac_hdr" | sed 'y%./+-%__p_%'`
echo $ac_n "checking for $ac_hdr""... $ac_c" 1>&6
-echo "configure:10531: checking for $ac_hdr" >&5
+echo "configure:10607: checking for $ac_hdr" >&5
cat > conftest.$ac_ext <<EOF
-#line 10534 "configure"
+#line 10610 "configure"
#include "confdefs.h"
#include <$ac_hdr>
EOF
ac_try="$ac_cpp conftest.$ac_ext >/dev/null 2>conftest.out"
-{ (eval echo configure:10539: \"$ac_try\") 1>&5; (eval $ac_try) 2>&5; }
+{ (eval echo configure:10615: \"$ac_try\") 1>&5; (eval $ac_try) 2>&5; }
ac_err=`grep -v '^ *+' conftest.out | grep -v "^conftest.${ac_ext}\$"`
if test -z "$ac_err"; then
rm -rf conftest*
echo $ac_n "checking for kstat_open in -lkstat""... $ac_c" 1>&6
-echo "configure:10575: checking for kstat_open in -lkstat" >&5
+echo "configure:10651: checking for kstat_open in -lkstat" >&5
ac_lib_var=`echo kstat'_'kstat_open | sed 'y%./+-%__p_%'`
xe_check_libs=" -lkstat "
cat > conftest.$ac_ext <<EOF
-#line 10580 "configure"
+#line 10656 "configure"
#include "confdefs.h"
/* Override any gcc2 internal prototype to avoid an error. */
/* We use char because int might match the return type of a gcc2
kstat_open()
; return 0; }
EOF
-if { (eval echo configure:10591: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
+if { (eval echo configure:10667: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
rm -rf conftest*
eval "ac_cv_lib_$ac_lib_var=yes"
else
do
ac_safe=`echo "$ac_hdr" | sed 'y%./+-%__p_%'`
echo $ac_n "checking for $ac_hdr""... $ac_c" 1>&6
-echo "configure:10626: checking for $ac_hdr" >&5
+echo "configure:10702: checking for $ac_hdr" >&5
cat > conftest.$ac_ext <<EOF
-#line 10629 "configure"
+#line 10705 "configure"
#include "confdefs.h"
#include <$ac_hdr>
EOF
ac_try="$ac_cpp conftest.$ac_ext >/dev/null 2>conftest.out"
-{ (eval echo configure:10634: \"$ac_try\") 1>&5; (eval $ac_try) 2>&5; }
+{ (eval echo configure:10710: \"$ac_try\") 1>&5; (eval $ac_try) 2>&5; }
ac_err=`grep -v '^ *+' conftest.out | grep -v "^conftest.${ac_ext}\$"`
if test -z "$ac_err"; then
rm -rf conftest*
echo $ac_n "checking for kvm_read in -lkvm""... $ac_c" 1>&6
-echo "configure:10666: checking for kvm_read in -lkvm" >&5
+echo "configure:10742: checking for kvm_read in -lkvm" >&5
ac_lib_var=`echo kvm'_'kvm_read | sed 'y%./+-%__p_%'`
xe_check_libs=" -lkvm "
cat > conftest.$ac_ext <<EOF
-#line 10671 "configure"
+#line 10747 "configure"
#include "confdefs.h"
/* Override any gcc2 internal prototype to avoid an error. */
/* We use char because int might match the return type of a gcc2
kvm_read()
; return 0; }
EOF
-if { (eval echo configure:10682: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
+if { (eval echo configure:10758: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
rm -rf conftest*
eval "ac_cv_lib_$ac_lib_var=yes"
else
fi
echo $ac_n "checking whether netdb declares h_errno""... $ac_c" 1>&6
-echo "configure:10716: checking whether netdb declares h_errno" >&5
+echo "configure:10792: checking whether netdb declares h_errno" >&5
cat > conftest.$ac_ext <<EOF
-#line 10718 "configure"
+#line 10794 "configure"
#include "confdefs.h"
#include <netdb.h>
int main() {
return h_errno;
; return 0; }
EOF
-if { (eval echo configure:10725: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
+if { (eval echo configure:10801: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
rm -rf conftest*
echo "$ac_t""yes" 1>&6
{ test "$extra_verbose" = "yes" && cat << \EOF
rm -f conftest*
echo $ac_n "checking for sigsetjmp""... $ac_c" 1>&6
-echo "configure:10745: checking for sigsetjmp" >&5
+echo "configure:10821: checking for sigsetjmp" >&5
cat > conftest.$ac_ext <<EOF
-#line 10747 "configure"
+#line 10823 "configure"
#include "confdefs.h"
#include <setjmp.h>
int main() {
sigjmp_buf bar; sigsetjmp (bar, 0);
; return 0; }
EOF
-if { (eval echo configure:10754: \"$ac_compile\") 1>&5; (eval $ac_compile) 2>&5; }; then
+if { (eval echo configure:10830: \"$ac_compile\") 1>&5; (eval $ac_compile) 2>&5; }; then
rm -rf conftest*
echo "$ac_t""yes" 1>&6
{ test "$extra_verbose" = "yes" && cat << \EOF
rm -f conftest*
echo $ac_n "checking whether localtime caches TZ""... $ac_c" 1>&6
-echo "configure:10774: checking whether localtime caches TZ" >&5
+echo "configure:10850: checking whether localtime caches TZ" >&5
if test "$ac_cv_func_tzset" = "yes"; then
cat > conftest.$ac_ext <<EOF
-#line 10778 "configure"
+#line 10854 "configure"
#include "confdefs.h"
#include <time.h>
#if STDC_HEADERS
exit (0);
}
EOF
-if { (eval echo configure:10813: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest && (./conftest; exit $?) 2>&5
+if { (eval echo configure:10889: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest && (./conftest; exit $?) 2>&5
then
emacs_cv_localtime_cache=no
else
if test "$HAVE_TIMEVAL" = "yes"; then
echo $ac_n "checking whether gettimeofday accepts one or two arguments""... $ac_c" 1>&6
-echo "configure:10843: checking whether gettimeofday accepts one or two arguments" >&5
+echo "configure:10919: checking whether gettimeofday accepts one or two arguments" >&5
cat > conftest.$ac_ext <<EOF
-#line 10845 "configure"
+#line 10921 "configure"
#include "confdefs.h"
#ifdef TIME_WITH_SYS_TIME
; return 0; }
EOF
-if { (eval echo configure:10866: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
+if { (eval echo configure:10942: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
rm -rf conftest*
echo "$ac_t""two" 1>&6
else
echo $ac_n "checking for inline""... $ac_c" 1>&6
-echo "configure:10888: checking for inline" >&5
+echo "configure:10964: checking for inline" >&5
ac_cv_c_inline=no
for ac_kw in inline __inline__ __inline; do
cat > conftest.$ac_ext <<EOF
-#line 10893 "configure"
+#line 10969 "configure"
#include "confdefs.h"
int main() {
} $ac_kw foo() {
; return 0; }
EOF
-if { (eval echo configure:10900: \"$ac_compile\") 1>&5; (eval $ac_compile) 2>&5; }; then
+if { (eval echo configure:10976: \"$ac_compile\") 1>&5; (eval $ac_compile) 2>&5; }; then
rm -rf conftest*
ac_cv_c_inline=$ac_kw; break
else
fi
-# The Ultrix 4.2 mips builtin alloca declared by alloca.h only works
+if test "$__DECC" != "yes"; then
+ # The Ultrix 4.2 mips builtin alloca declared by alloca.h only works
# for constant arguments. Useless!
echo $ac_n "checking for working alloca.h""... $ac_c" 1>&6
-echo "configure:10940: checking for working alloca.h" >&5
+echo "configure:11017: checking for working alloca.h" >&5
cat > conftest.$ac_ext <<EOF
-#line 10943 "configure"
+#line 11020 "configure"
#include "confdefs.h"
#include <alloca.h>
int main() {
char *p = alloca(2 * sizeof(int));
; return 0; }
EOF
-if { (eval echo configure:10950: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
+if { (eval echo configure:11027: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
rm -rf conftest*
ac_cv_header_alloca_h=yes
else
fi
echo $ac_n "checking for alloca""... $ac_c" 1>&6
-echo "configure:10974: checking for alloca" >&5
+echo "configure:11051: checking for alloca" >&5
cat > conftest.$ac_ext <<EOF
-#line 10977 "configure"
+#line 11054 "configure"
#include "confdefs.h"
#ifdef __GNUC__
char *p = (char *) alloca(1);
; return 0; }
EOF
-if { (eval echo configure:11005: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
+if { (eval echo configure:11082: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
rm -rf conftest*
ac_cv_func_alloca_works=yes
else
echo $ac_n "checking whether alloca needs Cray hooks""... $ac_c" 1>&6
-echo "configure:11044: checking whether alloca needs Cray hooks" >&5
+echo "configure:11121: checking whether alloca needs Cray hooks" >&5
cat > conftest.$ac_ext <<EOF
-#line 11047 "configure"
+#line 11124 "configure"
#include "confdefs.h"
#if defined(CRAY) && ! defined(CRAY2)
webecray
if test $ac_cv_os_cray = yes; then
for ac_func in _getb67 GETB67 getb67; do
echo $ac_n "checking for $ac_func""... $ac_c" 1>&6
-echo "configure:11071: checking for $ac_func" >&5
+echo "configure:11148: checking for $ac_func" >&5
cat > conftest.$ac_ext <<EOF
-#line 11074 "configure"
+#line 11151 "configure"
#include "confdefs.h"
/* System header to define __stub macros and hopefully few prototypes,
which can conflict with char $ac_func(); below. */
; return 0; }
EOF
-if { (eval echo configure:11097: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
+if { (eval echo configure:11174: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
rm -rf conftest*
eval "ac_cv_func_$ac_func=yes"
else
fi
echo $ac_n "checking stack direction for C alloca""... $ac_c" 1>&6
-echo "configure:11127: checking stack direction for C alloca" >&5
+echo "configure:11204: checking stack direction for C alloca" >&5
cat > conftest.$ac_ext <<EOF
-#line 11130 "configure"
+#line 11207 "configure"
#include "confdefs.h"
find_stack_direction ()
{
exit (find_stack_direction() < 0);
}
EOF
-if { (eval echo configure:11149: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest && (./conftest; exit $?) 2>&5
+if { (eval echo configure:11226: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest && (./conftest; exit $?) 2>&5
then
ac_cv_c_stack_direction=1
else
fi
-test -n "$ALLOCA" && extra_objs="$extra_objs $ALLOCA" && if test "$extra_verbose" = "yes"; then
+ test -n "$ALLOCA" && extra_objs="$extra_objs $ALLOCA" && if test "$extra_verbose" = "yes"; then
echo " xemacs will be linked with \"$ALLOCA\""
fi
+fi
ac_safe=`echo "vfork.h" | sed 'y%./+-%__p_%'`
echo $ac_n "checking for vfork.h""... $ac_c" 1>&6
-echo "configure:11178: checking for vfork.h" >&5
+echo "configure:11256: checking for vfork.h" >&5
cat > conftest.$ac_ext <<EOF
-#line 11181 "configure"
+#line 11259 "configure"
#include "confdefs.h"
#include <vfork.h>
EOF
ac_try="$ac_cpp conftest.$ac_ext >/dev/null 2>conftest.out"
-{ (eval echo configure:11186: \"$ac_try\") 1>&5; (eval $ac_try) 2>&5; }
+{ (eval echo configure:11264: \"$ac_try\") 1>&5; (eval $ac_try) 2>&5; }
ac_err=`grep -v '^ *+' conftest.out | grep -v "^conftest.${ac_ext}\$"`
if test -z "$ac_err"; then
rm -rf conftest*
fi
echo $ac_n "checking for working vfork""... $ac_c" 1>&6
-echo "configure:11214: checking for working vfork" >&5
+echo "configure:11292: checking for working vfork" >&5
cat > conftest.$ac_ext <<EOF
-#line 11217 "configure"
+#line 11295 "configure"
#include "confdefs.h"
/* Thanks to Paul Eggert for this test. */
#include <stdio.h>
}
}
EOF
-if { (eval echo configure:11312: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest && (./conftest; exit $?) 2>&5
+if { (eval echo configure:11390: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest && (./conftest; exit $?) 2>&5
then
ac_cv_func_vfork_works=yes
else
echo $ac_n "checking for working strcoll""... $ac_c" 1>&6
-echo "configure:11338: checking for working strcoll" >&5
+echo "configure:11416: checking for working strcoll" >&5
cat > conftest.$ac_ext <<EOF
-#line 11341 "configure"
+#line 11419 "configure"
#include "confdefs.h"
#include <string.h>
main ()
strcoll ("123", "456") >= 0);
}
EOF
-if { (eval echo configure:11351: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest && (./conftest; exit $?) 2>&5
+if { (eval echo configure:11429: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest && (./conftest; exit $?) 2>&5
then
ac_cv_func_strcoll_works=yes
else
for ac_func in getpgrp
do
echo $ac_n "checking for $ac_func""... $ac_c" 1>&6
-echo "configure:11379: checking for $ac_func" >&5
+echo "configure:11457: checking for $ac_func" >&5
cat > conftest.$ac_ext <<EOF
-#line 11382 "configure"
+#line 11460 "configure"
#include "confdefs.h"
/* System header to define __stub macros and hopefully few prototypes,
which can conflict with char $ac_func(); below. */
; return 0; }
EOF
-if { (eval echo configure:11405: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
+if { (eval echo configure:11483: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
rm -rf conftest*
eval "ac_cv_func_$ac_func=yes"
else
done
echo $ac_n "checking whether getpgrp takes no argument""... $ac_c" 1>&6
-echo "configure:11433: checking whether getpgrp takes no argument" >&5
+echo "configure:11511: checking whether getpgrp takes no argument" >&5
cat > conftest.$ac_ext <<EOF
-#line 11436 "configure"
+#line 11514 "configure"
#include "confdefs.h"
/*
}
EOF
-if { (eval echo configure:11491: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest && (./conftest; exit $?) 2>&5
+if { (eval echo configure:11569: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest && (./conftest; exit $?) 2>&5
then
ac_cv_func_getpgrp_void=yes
else
echo $ac_n "checking for working mmap""... $ac_c" 1>&6
-echo "configure:11518: checking for working mmap" >&5
+echo "configure:11596: checking for working mmap" >&5
case "$opsys" in ultrix* ) have_mmap=no ;; *)
cat > conftest.$ac_ext <<EOF
-#line 11521 "configure"
+#line 11599 "configure"
#include "confdefs.h"
#include <stdio.h>
#include <unistd.h>
return 1;
}
EOF
-if { (eval echo configure:11554: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest && (./conftest; exit $?) 2>&5
+if { (eval echo configure:11632: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest && (./conftest; exit $?) 2>&5
then
have_mmap=yes
else
if test "$rel_alloc $have_mmap" = "default yes"; then
if test "$doug_lea_malloc" = "yes"; then
echo $ac_n "checking for M_MMAP_THRESHOLD""... $ac_c" 1>&6
-echo "configure:11580: checking for M_MMAP_THRESHOLD" >&5
+echo "configure:11658: checking for M_MMAP_THRESHOLD" >&5
cat > conftest.$ac_ext <<EOF
-#line 11582 "configure"
+#line 11660 "configure"
#include "confdefs.h"
#include <malloc.h>
int main() {
; return 0; }
EOF
-if { (eval echo configure:11594: \"$ac_compile\") 1>&5; (eval $ac_compile) 2>&5; }; then
+if { (eval echo configure:11672: \"$ac_compile\") 1>&5; (eval $ac_compile) 2>&5; }; then
rm -rf conftest*
rel_alloc=no; echo "$ac_t""yes" 1>&6;
else
ac_safe=`echo "termios.h" | sed 'y%./+-%__p_%'`
echo $ac_n "checking for termios.h""... $ac_c" 1>&6
-echo "configure:11619: checking for termios.h" >&5
+echo "configure:11697: checking for termios.h" >&5
cat > conftest.$ac_ext <<EOF
-#line 11622 "configure"
+#line 11700 "configure"
#include "confdefs.h"
#include <termios.h>
EOF
ac_try="$ac_cpp conftest.$ac_ext >/dev/null 2>conftest.out"
-{ (eval echo configure:11627: \"$ac_try\") 1>&5; (eval $ac_try) 2>&5; }
+{ (eval echo configure:11705: \"$ac_try\") 1>&5; (eval $ac_try) 2>&5; }
ac_err=`grep -v '^ *+' conftest.out | grep -v "^conftest.${ac_ext}\$"`
if test -z "$ac_err"; then
rm -rf conftest*
echo "$ac_t""no" 1>&6
ac_safe=`echo "termio.h" | sed 'y%./+-%__p_%'`
echo $ac_n "checking for termio.h""... $ac_c" 1>&6
-echo "configure:11670: checking for termio.h" >&5
+echo "configure:11748: checking for termio.h" >&5
cat > conftest.$ac_ext <<EOF
-#line 11673 "configure"
+#line 11751 "configure"
#include "confdefs.h"
#include <termio.h>
EOF
ac_try="$ac_cpp conftest.$ac_ext >/dev/null 2>conftest.out"
-{ (eval echo configure:11678: \"$ac_try\") 1>&5; (eval $ac_try) 2>&5; }
+{ (eval echo configure:11756: \"$ac_try\") 1>&5; (eval $ac_try) 2>&5; }
ac_err=`grep -v '^ *+' conftest.out | grep -v "^conftest.${ac_ext}\$"`
if test -z "$ac_err"; then
rm -rf conftest*
echo $ac_n "checking for socket""... $ac_c" 1>&6
-echo "configure:11710: checking for socket" >&5
+echo "configure:11788: checking for socket" >&5
cat > conftest.$ac_ext <<EOF
-#line 11713 "configure"
+#line 11791 "configure"
#include "confdefs.h"
/* System header to define __stub macros and hopefully few prototypes,
which can conflict with char socket(); below. */
; return 0; }
EOF
-if { (eval echo configure:11736: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
+if { (eval echo configure:11814: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
rm -rf conftest*
eval "ac_cv_func_socket=yes"
else
echo "$ac_t""yes" 1>&6
ac_safe=`echo "netinet/in.h" | sed 'y%./+-%__p_%'`
echo $ac_n "checking for netinet/in.h""... $ac_c" 1>&6
-echo "configure:11751: checking for netinet/in.h" >&5
+echo "configure:11829: checking for netinet/in.h" >&5
cat > conftest.$ac_ext <<EOF
-#line 11754 "configure"
+#line 11832 "configure"
#include "confdefs.h"
#include <netinet/in.h>
EOF
ac_try="$ac_cpp conftest.$ac_ext >/dev/null 2>conftest.out"
-{ (eval echo configure:11759: \"$ac_try\") 1>&5; (eval $ac_try) 2>&5; }
+{ (eval echo configure:11837: \"$ac_try\") 1>&5; (eval $ac_try) 2>&5; }
ac_err=`grep -v '^ *+' conftest.out | grep -v "^conftest.${ac_ext}\$"`
if test -z "$ac_err"; then
rm -rf conftest*
echo "$ac_t""yes" 1>&6
ac_safe=`echo "arpa/inet.h" | sed 'y%./+-%__p_%'`
echo $ac_n "checking for arpa/inet.h""... $ac_c" 1>&6
-echo "configure:11776: checking for arpa/inet.h" >&5
+echo "configure:11854: checking for arpa/inet.h" >&5
cat > conftest.$ac_ext <<EOF
-#line 11779 "configure"
+#line 11857 "configure"
#include "confdefs.h"
#include <arpa/inet.h>
EOF
ac_try="$ac_cpp conftest.$ac_ext >/dev/null 2>conftest.out"
-{ (eval echo configure:11784: \"$ac_try\") 1>&5; (eval $ac_try) 2>&5; }
+{ (eval echo configure:11862: \"$ac_try\") 1>&5; (eval $ac_try) 2>&5; }
ac_err=`grep -v '^ *+' conftest.out | grep -v "^conftest.${ac_ext}\$"`
if test -z "$ac_err"; then
rm -rf conftest*
}
echo $ac_n "checking "for sun_len member in struct sockaddr_un"""... $ac_c" 1>&6
-echo "configure:11809: checking "for sun_len member in struct sockaddr_un"" >&5
+echo "configure:11887: checking "for sun_len member in struct sockaddr_un"" >&5
cat > conftest.$ac_ext <<EOF
-#line 11811 "configure"
+#line 11889 "configure"
#include "confdefs.h"
#include <sys/types.h>
static struct sockaddr_un x; x.sun_len = 1;
; return 0; }
EOF
-if { (eval echo configure:11822: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
+if { (eval echo configure:11900: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
rm -rf conftest*
echo "$ac_t""yes" 1>&6; { test "$extra_verbose" = "yes" && cat << \EOF
Defining HAVE_SOCKADDR_SUN_LEN
fi
rm -f conftest*
echo $ac_n "checking "for ip_mreq struct in netinet/in.h"""... $ac_c" 1>&6
-echo "configure:11840: checking "for ip_mreq struct in netinet/in.h"" >&5
+echo "configure:11918: checking "for ip_mreq struct in netinet/in.h"" >&5
cat > conftest.$ac_ext <<EOF
-#line 11842 "configure"
+#line 11920 "configure"
#include "confdefs.h"
#include <sys/types.h>
static struct ip_mreq x;
; return 0; }
EOF
-if { (eval echo configure:11852: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
+if { (eval echo configure:11930: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
rm -rf conftest*
echo "$ac_t""yes" 1>&6; { test "$extra_verbose" = "yes" && cat << \EOF
Defining HAVE_MULTICAST
echo $ac_n "checking for msgget""... $ac_c" 1>&6
-echo "configure:11883: checking for msgget" >&5
+echo "configure:11961: checking for msgget" >&5
cat > conftest.$ac_ext <<EOF
-#line 11886 "configure"
+#line 11964 "configure"
#include "confdefs.h"
/* System header to define __stub macros and hopefully few prototypes,
which can conflict with char msgget(); below. */
; return 0; }
EOF
-if { (eval echo configure:11909: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
+if { (eval echo configure:11987: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
rm -rf conftest*
eval "ac_cv_func_msgget=yes"
else
echo "$ac_t""yes" 1>&6
ac_safe=`echo "sys/ipc.h" | sed 'y%./+-%__p_%'`
echo $ac_n "checking for sys/ipc.h""... $ac_c" 1>&6
-echo "configure:11924: checking for sys/ipc.h" >&5
+echo "configure:12002: checking for sys/ipc.h" >&5
cat > conftest.$ac_ext <<EOF
-#line 11927 "configure"
+#line 12005 "configure"
#include "confdefs.h"
#include <sys/ipc.h>
EOF
ac_try="$ac_cpp conftest.$ac_ext >/dev/null 2>conftest.out"
-{ (eval echo configure:11932: \"$ac_try\") 1>&5; (eval $ac_try) 2>&5; }
+{ (eval echo configure:12010: \"$ac_try\") 1>&5; (eval $ac_try) 2>&5; }
ac_err=`grep -v '^ *+' conftest.out | grep -v "^conftest.${ac_ext}\$"`
if test -z "$ac_err"; then
rm -rf conftest*
echo "$ac_t""yes" 1>&6
ac_safe=`echo "sys/msg.h" | sed 'y%./+-%__p_%'`
echo $ac_n "checking for sys/msg.h""... $ac_c" 1>&6
-echo "configure:11949: checking for sys/msg.h" >&5
+echo "configure:12027: checking for sys/msg.h" >&5
cat > conftest.$ac_ext <<EOF
-#line 11952 "configure"
+#line 12030 "configure"
#include "confdefs.h"
#include <sys/msg.h>
EOF
ac_try="$ac_cpp conftest.$ac_ext >/dev/null 2>conftest.out"
-{ (eval echo configure:11957: \"$ac_try\") 1>&5; (eval $ac_try) 2>&5; }
+{ (eval echo configure:12035: \"$ac_try\") 1>&5; (eval $ac_try) 2>&5; }
ac_err=`grep -v '^ *+' conftest.out | grep -v "^conftest.${ac_ext}\$"`
if test -z "$ac_err"; then
rm -rf conftest*
ac_safe=`echo "dirent.h" | sed 'y%./+-%__p_%'`
echo $ac_n "checking for dirent.h""... $ac_c" 1>&6
-echo "configure:11995: checking for dirent.h" >&5
+echo "configure:12073: checking for dirent.h" >&5
cat > conftest.$ac_ext <<EOF
-#line 11998 "configure"
+#line 12076 "configure"
#include "confdefs.h"
#include <dirent.h>
EOF
ac_try="$ac_cpp conftest.$ac_ext >/dev/null 2>conftest.out"
-{ (eval echo configure:12003: \"$ac_try\") 1>&5; (eval $ac_try) 2>&5; }
+{ (eval echo configure:12081: \"$ac_try\") 1>&5; (eval $ac_try) 2>&5; }
ac_err=`grep -v '^ *+' conftest.out | grep -v "^conftest.${ac_ext}\$"`
if test -z "$ac_err"; then
rm -rf conftest*
echo "$ac_t""no" 1>&6
ac_safe=`echo "sys/dir.h" | sed 'y%./+-%__p_%'`
echo $ac_n "checking for sys/dir.h""... $ac_c" 1>&6
-echo "configure:12030: checking for sys/dir.h" >&5
+echo "configure:12108: checking for sys/dir.h" >&5
cat > conftest.$ac_ext <<EOF
-#line 12033 "configure"
+#line 12111 "configure"
#include "confdefs.h"
#include <sys/dir.h>
EOF
ac_try="$ac_cpp conftest.$ac_ext >/dev/null 2>conftest.out"
-{ (eval echo configure:12038: \"$ac_try\") 1>&5; (eval $ac_try) 2>&5; }
+{ (eval echo configure:12116: \"$ac_try\") 1>&5; (eval $ac_try) 2>&5; }
ac_err=`grep -v '^ *+' conftest.out | grep -v "^conftest.${ac_ext}\$"`
if test -z "$ac_err"; then
rm -rf conftest*
ac_safe=`echo "nlist.h" | sed 'y%./+-%__p_%'`
echo $ac_n "checking for nlist.h""... $ac_c" 1>&6
-echo "configure:12071: checking for nlist.h" >&5
+echo "configure:12149: checking for nlist.h" >&5
cat > conftest.$ac_ext <<EOF
-#line 12074 "configure"
+#line 12152 "configure"
#include "confdefs.h"
#include <nlist.h>
EOF
ac_try="$ac_cpp conftest.$ac_ext >/dev/null 2>conftest.out"
-{ (eval echo configure:12079: \"$ac_try\") 1>&5; (eval $ac_try) 2>&5; }
+{ (eval echo configure:12157: \"$ac_try\") 1>&5; (eval $ac_try) 2>&5; }
ac_err=`grep -v '^ *+' conftest.out | grep -v "^conftest.${ac_ext}\$"`
if test -z "$ac_err"; then
rm -rf conftest*
echo "checking "for sound support"" 1>&6
-echo "configure:12109: checking "for sound support"" >&5
+echo "configure:12187: checking "for sound support"" >&5
test -z "$with_native_sound" -a -n "$native_sound_lib" && with_native_sound=yes
if test "$with_native_sound" != "no"; then
if test -n "$native_sound_lib"; then
ac_safe=`echo "multimedia/audio_device.h" | sed 'y%./+-%__p_%'`
echo $ac_n "checking for multimedia/audio_device.h""... $ac_c" 1>&6
-echo "configure:12116: checking for multimedia/audio_device.h" >&5
+echo "configure:12194: checking for multimedia/audio_device.h" >&5
cat > conftest.$ac_ext <<EOF
-#line 12119 "configure"
+#line 12197 "configure"
#include "confdefs.h"
#include <multimedia/audio_device.h>
EOF
ac_try="$ac_cpp conftest.$ac_ext >/dev/null 2>conftest.out"
-{ (eval echo configure:12124: \"$ac_try\") 1>&5; (eval $ac_try) 2>&5; }
+{ (eval echo configure:12202: \"$ac_try\") 1>&5; (eval $ac_try) 2>&5; }
ac_err=`grep -v '^ *+' conftest.out | grep -v "^conftest.${ac_ext}\$"`
if test -z "$ac_err"; then
rm -rf conftest*
if test -z "$native_sound_lib"; then
echo $ac_n "checking for ALopenport in -laudio""... $ac_c" 1>&6
-echo "configure:12172: checking for ALopenport in -laudio" >&5
+echo "configure:12250: checking for ALopenport in -laudio" >&5
ac_lib_var=`echo audio'_'ALopenport | sed 'y%./+-%__p_%'`
xe_check_libs=" -laudio "
cat > conftest.$ac_ext <<EOF
-#line 12177 "configure"
+#line 12255 "configure"
#include "confdefs.h"
/* Override any gcc2 internal prototype to avoid an error. */
/* We use char because int might match the return type of a gcc2
ALopenport()
; return 0; }
EOF
-if { (eval echo configure:12188: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
+if { (eval echo configure:12266: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
rm -rf conftest*
eval "ac_cv_lib_$ac_lib_var=yes"
else
if test -z "$native_sound_lib"; then
echo $ac_n "checking for AOpenAudio in -lAlib""... $ac_c" 1>&6
-echo "configure:12219: checking for AOpenAudio in -lAlib" >&5
+echo "configure:12297: checking for AOpenAudio in -lAlib" >&5
ac_lib_var=`echo Alib'_'AOpenAudio | sed 'y%./+-%__p_%'`
xe_check_libs=" -lAlib "
cat > conftest.$ac_ext <<EOF
-#line 12224 "configure"
+#line 12302 "configure"
#include "confdefs.h"
/* Override any gcc2 internal prototype to avoid an error. */
/* We use char because int might match the return type of a gcc2
AOpenAudio()
; return 0; }
EOF
-if { (eval echo configure:12235: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
+if { (eval echo configure:12313: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
rm -rf conftest*
eval "ac_cv_lib_$ac_lib_var=yes"
else
for dir in "machine" "sys" "linux"; do
ac_safe=`echo "${dir}/soundcard.h" | sed 'y%./+-%__p_%'`
echo $ac_n "checking for ${dir}/soundcard.h""... $ac_c" 1>&6
-echo "configure:12273: checking for ${dir}/soundcard.h" >&5
+echo "configure:12351: checking for ${dir}/soundcard.h" >&5
cat > conftest.$ac_ext <<EOF
-#line 12276 "configure"
+#line 12354 "configure"
#include "confdefs.h"
#include <${dir}/soundcard.h>
EOF
ac_try="$ac_cpp conftest.$ac_ext >/dev/null 2>conftest.out"
-{ (eval echo configure:12281: \"$ac_try\") 1>&5; (eval $ac_try) 2>&5; }
+{ (eval echo configure:12359: \"$ac_try\") 1>&5; (eval $ac_try) 2>&5; }
ac_err=`grep -v '^ *+' conftest.out | grep -v "^conftest.${ac_ext}\$"`
if test -z "$ac_err"; then
rm -rf conftest*
if test "$with_nas_sound" != "no"; then
ac_safe=`echo "audio/audiolib.h" | sed 'y%./+-%__p_%'`
echo $ac_n "checking for audio/audiolib.h""... $ac_c" 1>&6
-echo "configure:12342: checking for audio/audiolib.h" >&5
+echo "configure:12420: checking for audio/audiolib.h" >&5
cat > conftest.$ac_ext <<EOF
-#line 12345 "configure"
+#line 12423 "configure"
#include "confdefs.h"
#include <audio/audiolib.h>
EOF
ac_try="$ac_cpp conftest.$ac_ext >/dev/null 2>conftest.out"
-{ (eval echo configure:12350: \"$ac_try\") 1>&5; (eval $ac_try) 2>&5; }
+{ (eval echo configure:12428: \"$ac_try\") 1>&5; (eval $ac_try) 2>&5; }
ac_err=`grep -v '^ *+' conftest.out | grep -v "^conftest.${ac_ext}\$"`
if test -z "$ac_err"; then
rm -rf conftest*
echo $ac_n "checking for AuOpenServer in -laudio""... $ac_c" 1>&6
-echo "configure:12368: checking for AuOpenServer in -laudio" >&5
+echo "configure:12446: checking for AuOpenServer in -laudio" >&5
ac_lib_var=`echo audio'_'AuOpenServer | sed 'y%./+-%__p_%'`
xe_check_libs=" -laudio "
cat > conftest.$ac_ext <<EOF
-#line 12373 "configure"
+#line 12451 "configure"
#include "confdefs.h"
/* Override any gcc2 internal prototype to avoid an error. */
/* We use char because int might match the return type of a gcc2
AuOpenServer()
; return 0; }
EOF
-if { (eval echo configure:12384: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
+if { (eval echo configure:12462: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
rm -rf conftest*
eval "ac_cv_lib_$ac_lib_var=yes"
else
fi
libs_x="-laudio $libs_x" && if test "$extra_verbose" = "yes"; then echo " Prepending \"-laudio\" to \$libs_x"; fi
cat > conftest.$ac_ext <<EOF
-#line 12423 "configure"
+#line 12501 "configure"
#include "confdefs.h"
#include <audio/Xtutil.h>
EOF
# Extract the first word of "esd-config", so it can be a program name with args.
set dummy esd-config; ac_word=$2
echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
-echo "configure:12454: checking for $ac_word" >&5
+echo "configure:12532: checking for $ac_word" >&5
if test -n "$have_esd_config"; then
ac_cv_prog_have_esd_config="$have_esd_config" # Let the user override the test.
c_switch_site="$c_switch_site `esd-config --cflags`" && if test "$extra_verbose" = "yes"; then echo " Appending \"`esd-config --cflags`\" to \$c_switch_site"; fi
LIBS="`esd-config --libs` $LIBS" && if test "$extra_verbose" = "yes"; then echo " Prepending \"`esd-config --libs`\" to \$LIBS"; fi
echo $ac_n "checking for esd_play_stream""... $ac_c" 1>&6
-echo "configure:12483: checking for esd_play_stream" >&5
+echo "configure:12561: checking for esd_play_stream" >&5
cat > conftest.$ac_ext <<EOF
-#line 12486 "configure"
+#line 12564 "configure"
#include "confdefs.h"
/* System header to define __stub macros and hopefully few prototypes,
which can conflict with char esd_play_stream(); below. */
; return 0; }
EOF
-if { (eval echo configure:12509: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
+if { (eval echo configure:12587: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
rm -rf conftest*
eval "ac_cv_func_esd_play_stream=yes"
else
if test "$with_tty" = "yes" ; then
echo "checking for TTY-related features" 1>&6
-echo "configure:12560: checking for TTY-related features" >&5
+echo "configure:12638: checking for TTY-related features" >&5
{ test "$extra_verbose" = "yes" && cat << \EOF
Defining HAVE_TTY
EOF
if test -z "$with_ncurses"; then
echo $ac_n "checking for tgetent in -lncurses""... $ac_c" 1>&6
-echo "configure:12576: checking for tgetent in -lncurses" >&5
+echo "configure:12654: checking for tgetent in -lncurses" >&5
ac_lib_var=`echo ncurses'_'tgetent | sed 'y%./+-%__p_%'`
xe_check_libs=" -lncurses "
cat > conftest.$ac_ext <<EOF
-#line 12581 "configure"
+#line 12659 "configure"
#include "confdefs.h"
/* Override any gcc2 internal prototype to avoid an error. */
/* We use char because int might match the return type of a gcc2
tgetent()
; return 0; }
EOF
-if { (eval echo configure:12592: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
+if { (eval echo configure:12670: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
rm -rf conftest*
eval "ac_cv_lib_$ac_lib_var=yes"
else
ac_safe=`echo "ncurses/curses.h" | sed 'y%./+-%__p_%'`
echo $ac_n "checking for ncurses/curses.h""... $ac_c" 1>&6
-echo "configure:12625: checking for ncurses/curses.h" >&5
+echo "configure:12703: checking for ncurses/curses.h" >&5
cat > conftest.$ac_ext <<EOF
-#line 12628 "configure"
+#line 12706 "configure"
#include "confdefs.h"
#include <ncurses/curses.h>
EOF
ac_try="$ac_cpp conftest.$ac_ext >/dev/null 2>conftest.out"
-{ (eval echo configure:12633: \"$ac_try\") 1>&5; (eval $ac_try) 2>&5; }
+{ (eval echo configure:12711: \"$ac_try\") 1>&5; (eval $ac_try) 2>&5; }
ac_err=`grep -v '^ *+' conftest.out | grep -v "^conftest.${ac_ext}\$"`
if test -z "$ac_err"; then
rm -rf conftest*
ac_safe=`echo "ncurses/term.h" | sed 'y%./+-%__p_%'`
echo $ac_n "checking for ncurses/term.h""... $ac_c" 1>&6
-echo "configure:12655: checking for ncurses/term.h" >&5
+echo "configure:12733: checking for ncurses/term.h" >&5
cat > conftest.$ac_ext <<EOF
-#line 12658 "configure"
+#line 12736 "configure"
#include "confdefs.h"
#include <ncurses/term.h>
EOF
ac_try="$ac_cpp conftest.$ac_ext >/dev/null 2>conftest.out"
-{ (eval echo configure:12663: \"$ac_try\") 1>&5; (eval $ac_try) 2>&5; }
+{ (eval echo configure:12741: \"$ac_try\") 1>&5; (eval $ac_try) 2>&5; }
ac_err=`grep -v '^ *+' conftest.out | grep -v "^conftest.${ac_ext}\$"`
if test -z "$ac_err"; then
rm -rf conftest*
c_switch_site="$c_switch_site -I/usr/include/ncurses"
ac_safe=`echo "ncurses/curses.h" | sed 'y%./+-%__p_%'`
echo $ac_n "checking for ncurses/curses.h""... $ac_c" 1>&6
-echo "configure:12693: checking for ncurses/curses.h" >&5
+echo "configure:12771: checking for ncurses/curses.h" >&5
cat > conftest.$ac_ext <<EOF
-#line 12696 "configure"
+#line 12774 "configure"
#include "confdefs.h"
#include <ncurses/curses.h>
EOF
ac_try="$ac_cpp conftest.$ac_ext >/dev/null 2>conftest.out"
-{ (eval echo configure:12701: \"$ac_try\") 1>&5; (eval $ac_try) 2>&5; }
+{ (eval echo configure:12779: \"$ac_try\") 1>&5; (eval $ac_try) 2>&5; }
ac_err=`grep -v '^ *+' conftest.out | grep -v "^conftest.${ac_ext}\$"`
if test -z "$ac_err"; then
rm -rf conftest*
for lib in curses termlib termcap; do
echo $ac_n "checking for tgetent in -l$lib""... $ac_c" 1>&6
-echo "configure:12736: checking for tgetent in -l$lib" >&5
+echo "configure:12814: checking for tgetent in -l$lib" >&5
ac_lib_var=`echo $lib'_'tgetent | sed 'y%./+-%__p_%'`
xe_check_libs=" -l$lib "
cat > conftest.$ac_ext <<EOF
-#line 12741 "configure"
+#line 12819 "configure"
#include "confdefs.h"
/* Override any gcc2 internal prototype to avoid an error. */
/* We use char because int might match the return type of a gcc2
tgetent()
; return 0; }
EOF
-if { (eval echo configure:12752: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
+if { (eval echo configure:12830: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
rm -rf conftest*
eval "ac_cv_lib_$ac_lib_var=yes"
else
else
echo $ac_n "checking for tgetent in -lcurses""... $ac_c" 1>&6
-echo "configure:12783: checking for tgetent in -lcurses" >&5
+echo "configure:12861: checking for tgetent in -lcurses" >&5
ac_lib_var=`echo curses'_'tgetent | sed 'y%./+-%__p_%'`
xe_check_libs=" -lcurses "
cat > conftest.$ac_ext <<EOF
-#line 12788 "configure"
+#line 12866 "configure"
#include "confdefs.h"
/* Override any gcc2 internal prototype to avoid an error. */
/* We use char because int might match the return type of a gcc2
tgetent()
; return 0; }
EOF
-if { (eval echo configure:12799: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
+if { (eval echo configure:12877: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
rm -rf conftest*
eval "ac_cv_lib_$ac_lib_var=yes"
else
else
echo "$ac_t""no" 1>&6
echo $ac_n "checking for tgetent in -ltermcap""... $ac_c" 1>&6
-echo "configure:12817: checking for tgetent in -ltermcap" >&5
+echo "configure:12895: checking for tgetent in -ltermcap" >&5
ac_lib_var=`echo termcap'_'tgetent | sed 'y%./+-%__p_%'`
xe_check_libs=" -ltermcap "
cat > conftest.$ac_ext <<EOF
-#line 12822 "configure"
+#line 12900 "configure"
#include "confdefs.h"
/* Override any gcc2 internal prototype to avoid an error. */
/* We use char because int might match the return type of a gcc2
tgetent()
; return 0; }
EOF
-if { (eval echo configure:12833: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
+if { (eval echo configure:12911: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
rm -rf conftest*
eval "ac_cv_lib_$ac_lib_var=yes"
else
test -z "$with_gpm" && { ac_safe=`echo "gpm.h" | sed 'y%./+-%__p_%'`
echo $ac_n "checking for gpm.h""... $ac_c" 1>&6
-echo "configure:12881: checking for gpm.h" >&5
+echo "configure:12959: checking for gpm.h" >&5
cat > conftest.$ac_ext <<EOF
-#line 12884 "configure"
+#line 12962 "configure"
#include "confdefs.h"
#include <gpm.h>
EOF
ac_try="$ac_cpp conftest.$ac_ext >/dev/null 2>conftest.out"
-{ (eval echo configure:12889: \"$ac_try\") 1>&5; (eval $ac_try) 2>&5; }
+{ (eval echo configure:12967: \"$ac_try\") 1>&5; (eval $ac_try) 2>&5; }
ac_err=`grep -v '^ *+' conftest.out | grep -v "^conftest.${ac_ext}\$"`
if test -z "$ac_err"; then
rm -rf conftest*
}
test -z "$with_gpm" && {
echo $ac_n "checking for Gpm_Open in -lgpm""... $ac_c" 1>&6
-echo "configure:12912: checking for Gpm_Open in -lgpm" >&5
+echo "configure:12990: checking for Gpm_Open in -lgpm" >&5
ac_lib_var=`echo gpm'_'Gpm_Open | sed 'y%./+-%__p_%'`
xe_check_libs=" -lgpm "
cat > conftest.$ac_ext <<EOF
-#line 12917 "configure"
+#line 12995 "configure"
#include "confdefs.h"
/* Override any gcc2 internal prototype to avoid an error. */
/* We use char because int might match the return type of a gcc2
Gpm_Open()
; return 0; }
EOF
-if { (eval echo configure:12928: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
+if { (eval echo configure:13006: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
rm -rf conftest*
eval "ac_cv_lib_$ac_lib_var=yes"
else
test "$with_database_gdbm $with_database_dbm $with_database_berkdb" \
!= "no no no" && echo "checking for database support" 1>&6
-echo "configure:12978: checking for database support" >&5
+echo "configure:13056: checking for database support" >&5
if test "$with_database_gdbm $with_database_dbm" != "no no"; then
ac_safe=`echo "ndbm.h" | sed 'y%./+-%__p_%'`
echo $ac_n "checking for ndbm.h""... $ac_c" 1>&6
-echo "configure:12983: checking for ndbm.h" >&5
+echo "configure:13061: checking for ndbm.h" >&5
cat > conftest.$ac_ext <<EOF
-#line 12986 "configure"
+#line 13064 "configure"
#include "confdefs.h"
#include <ndbm.h>
EOF
ac_try="$ac_cpp conftest.$ac_ext >/dev/null 2>conftest.out"
-{ (eval echo configure:12991: \"$ac_try\") 1>&5; (eval $ac_try) 2>&5; }
+{ (eval echo configure:13069: \"$ac_try\") 1>&5; (eval $ac_try) 2>&5; }
ac_err=`grep -v '^ *+' conftest.out | grep -v "^conftest.${ac_ext}\$"`
if test -z "$ac_err"; then
rm -rf conftest*
if test "$with_database_gdbm" != "no"; then
echo $ac_n "checking for dbm_open in -lgdbm""... $ac_c" 1>&6
-echo "configure:13021: checking for dbm_open in -lgdbm" >&5
+echo "configure:13099: checking for dbm_open in -lgdbm" >&5
ac_lib_var=`echo gdbm'_'dbm_open | sed 'y%./+-%__p_%'`
xe_check_libs=" -lgdbm "
cat > conftest.$ac_ext <<EOF
-#line 13026 "configure"
+#line 13104 "configure"
#include "confdefs.h"
/* Override any gcc2 internal prototype to avoid an error. */
/* We use char because int might match the return type of a gcc2
dbm_open()
; return 0; }
EOF
-if { (eval echo configure:13037: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
+if { (eval echo configure:13115: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
rm -rf conftest*
eval "ac_cv_lib_$ac_lib_var=yes"
else
if test "$with_database_dbm" != "no"; then
echo $ac_n "checking for dbm_open""... $ac_c" 1>&6
-echo "configure:13065: checking for dbm_open" >&5
+echo "configure:13143: checking for dbm_open" >&5
cat > conftest.$ac_ext <<EOF
-#line 13068 "configure"
+#line 13146 "configure"
#include "confdefs.h"
/* System header to define __stub macros and hopefully few prototypes,
which can conflict with char dbm_open(); below. */
; return 0; }
EOF
-if { (eval echo configure:13091: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
+if { (eval echo configure:13169: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
rm -rf conftest*
eval "ac_cv_func_dbm_open=yes"
else
echo $ac_n "checking for dbm_open in -ldbm""... $ac_c" 1>&6
-echo "configure:13110: checking for dbm_open in -ldbm" >&5
+echo "configure:13188: checking for dbm_open in -ldbm" >&5
ac_lib_var=`echo dbm'_'dbm_open | sed 'y%./+-%__p_%'`
xe_check_libs=" -ldbm "
cat > conftest.$ac_ext <<EOF
-#line 13115 "configure"
+#line 13193 "configure"
#include "confdefs.h"
/* Override any gcc2 internal prototype to avoid an error. */
/* We use char because int might match the return type of a gcc2
dbm_open()
; return 0; }
EOF
-if { (eval echo configure:13126: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
+if { (eval echo configure:13204: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
rm -rf conftest*
eval "ac_cv_lib_$ac_lib_var=yes"
else
if test "$with_database_berkdb" != "no"; then
echo $ac_n "checking for Berkeley db.h""... $ac_c" 1>&6
-echo "configure:13167: checking for Berkeley db.h" >&5
+echo "configure:13245: checking for Berkeley db.h" >&5
for header in "db/db.h" "db.h"; do
cat > conftest.$ac_ext <<EOF
-#line 13170 "configure"
+#line 13248 "configure"
#include "confdefs.h"
#include <stdlib.h>
; return 0; }
EOF
-if { (eval echo configure:13192: \"$ac_compile\") 1>&5; (eval $ac_compile) 2>&5; }; then
+if { (eval echo configure:13270: \"$ac_compile\") 1>&5; (eval $ac_compile) 2>&5; }; then
rm -rf conftest*
db_h_file="$header"; break
else
if test "$with_database_berkdb" != "no"; then
echo $ac_n "checking for Berkeley DB version""... $ac_c" 1>&6
-echo "configure:13208: checking for Berkeley DB version" >&5
+echo "configure:13286: checking for Berkeley DB version" >&5
cat > conftest.$ac_ext <<EOF
-#line 13210 "configure"
+#line 13288 "configure"
#include "confdefs.h"
#include <$db_h_file>
#if DB_VERSION_MAJOR > 1
if (eval "$ac_cpp conftest.$ac_ext") 2>&5 |
egrep "yes" >/dev/null 2>&1; then
rm -rf conftest*
- echo "$ac_t""2" 1>&6; dbfunc=db_open
+ cat > conftest.$ac_ext <<EOF
+#line 13300 "configure"
+#include "confdefs.h"
+#include <$db_h_file>
+#if DB_VERSION_MAJOR > 2
+yes
+#endif
+
+EOF
+if (eval "$ac_cpp conftest.$ac_ext") 2>&5 |
+ egrep "yes" >/dev/null 2>&1; then
+ rm -rf conftest*
+ echo "$ac_t""3" 1>&6; dbfunc=db_create
else
rm -rf conftest*
- echo "$ac_t""1" 1>&6; dbfunc=dbopen
+
+ echo "$ac_t""2" 1>&6; dbfunc=db_open
+fi
+rm -f conftest*
+
+else
+ rm -rf conftest*
+
+ echo "$ac_t""1" 1>&6; dbfunc=dbopen
fi
rm -f conftest*
echo $ac_n "checking for $dbfunc""... $ac_c" 1>&6
-echo "configure:13229: checking for $dbfunc" >&5
+echo "configure:13327: checking for $dbfunc" >&5
cat > conftest.$ac_ext <<EOF
-#line 13232 "configure"
+#line 13330 "configure"
#include "confdefs.h"
/* System header to define __stub macros and hopefully few prototypes,
which can conflict with char $dbfunc(); below. */
; return 0; }
EOF
-if { (eval echo configure:13255: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
+if { (eval echo configure:13353: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
rm -rf conftest*
eval "ac_cv_func_$dbfunc=yes"
else
echo $ac_n "checking for $dbfunc in -ldb""... $ac_c" 1>&6
-echo "configure:13274: checking for $dbfunc in -ldb" >&5
+echo "configure:13372: checking for $dbfunc in -ldb" >&5
ac_lib_var=`echo db'_'$dbfunc | sed 'y%./+-%__p_%'`
xe_check_libs=" -ldb "
cat > conftest.$ac_ext <<EOF
-#line 13279 "configure"
+#line 13377 "configure"
#include "confdefs.h"
/* Override any gcc2 internal prototype to avoid an error. */
/* We use char because int might match the return type of a gcc2
$dbfunc()
; return 0; }
EOF
-if { (eval echo configure:13290: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
+if { (eval echo configure:13388: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
rm -rf conftest*
eval "ac_cv_lib_$ac_lib_var=yes"
else
if test "$with_socks" = "yes"; then
echo $ac_n "checking for SOCKSinit in -lsocks""... $ac_c" 1>&6
-echo "configure:13354: checking for SOCKSinit in -lsocks" >&5
+echo "configure:13452: checking for SOCKSinit in -lsocks" >&5
ac_lib_var=`echo socks'_'SOCKSinit | sed 'y%./+-%__p_%'`
xe_check_libs=" -lsocks "
cat > conftest.$ac_ext <<EOF
-#line 13359 "configure"
+#line 13457 "configure"
#include "confdefs.h"
/* Override any gcc2 internal prototype to avoid an error. */
/* We use char because int might match the return type of a gcc2
SOCKSinit()
; return 0; }
EOF
-if { (eval echo configure:13370: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
+if { (eval echo configure:13468: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
rm -rf conftest*
eval "ac_cv_lib_$ac_lib_var=yes"
else
if test "$with_modules" != "no"; then
echo "checking for module support" 1>&6
-echo "configure:13425: checking for module support" >&5
+echo "configure:13523: checking for module support" >&5
if test "$with_msw" = "yes"; then
have_dl=yes;
else
ac_safe=`echo "dlfcn.h" | sed 'y%./+-%__p_%'`
echo $ac_n "checking for dlfcn.h""... $ac_c" 1>&6
-echo "configure:13432: checking for dlfcn.h" >&5
+echo "configure:13530: checking for dlfcn.h" >&5
cat > conftest.$ac_ext <<EOF
-#line 13435 "configure"
+#line 13533 "configure"
#include "confdefs.h"
#include <dlfcn.h>
EOF
ac_try="$ac_cpp conftest.$ac_ext >/dev/null 2>conftest.out"
-{ (eval echo configure:13440: \"$ac_try\") 1>&5; (eval $ac_try) 2>&5; }
+{ (eval echo configure:13538: \"$ac_try\") 1>&5; (eval $ac_try) 2>&5; }
ac_err=`grep -v '^ *+' conftest.out | grep -v "^conftest.${ac_ext}\$"`
if test -z "$ac_err"; then
rm -rf conftest*
echo $ac_n "checking for dlopen in -ldl""... $ac_c" 1>&6
-echo "configure:13458: checking for dlopen in -ldl" >&5
+echo "configure:13556: checking for dlopen in -ldl" >&5
ac_lib_var=`echo dl'_'dlopen | sed 'y%./+-%__p_%'`
xe_check_libs=" -ldl "
cat > conftest.$ac_ext <<EOF
-#line 13463 "configure"
+#line 13561 "configure"
#include "confdefs.h"
/* Override any gcc2 internal prototype to avoid an error. */
/* We use char because int might match the return type of a gcc2
dlopen()
; return 0; }
EOF
-if { (eval echo configure:13474: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
+if { (eval echo configure:13572: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
rm -rf conftest*
eval "ac_cv_lib_$ac_lib_var=yes"
else
echo "$ac_t""no" 1>&6
echo $ac_n "checking for dlopen in -lc""... $ac_c" 1>&6
-echo "configure:13493: checking for dlopen in -lc" >&5
+echo "configure:13591: checking for dlopen in -lc" >&5
ac_lib_var=`echo c'_'dlopen | sed 'y%./+-%__p_%'`
xe_check_libs=" -lc "
cat > conftest.$ac_ext <<EOF
-#line 13498 "configure"
+#line 13596 "configure"
#include "confdefs.h"
/* Override any gcc2 internal prototype to avoid an error. */
/* We use char because int might match the return type of a gcc2
dlopen()
; return 0; }
EOF
-if { (eval echo configure:13509: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
+if { (eval echo configure:13607: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
rm -rf conftest*
eval "ac_cv_lib_$ac_lib_var=yes"
else
else
echo $ac_n "checking for shl_load in -ldld""... $ac_c" 1>&6
-echo "configure:13548: checking for shl_load in -ldld" >&5
+echo "configure:13646: checking for shl_load in -ldld" >&5
ac_lib_var=`echo dld'_'shl_load | sed 'y%./+-%__p_%'`
xe_check_libs=" -ldld "
cat > conftest.$ac_ext <<EOF
-#line 13553 "configure"
+#line 13651 "configure"
#include "confdefs.h"
/* Override any gcc2 internal prototype to avoid an error. */
/* We use char because int might match the return type of a gcc2
shl_load()
; return 0; }
EOF
-if { (eval echo configure:13564: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
+if { (eval echo configure:13662: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
rm -rf conftest*
eval "ac_cv_lib_$ac_lib_var=yes"
else
echo "$ac_t""no" 1>&6
echo $ac_n "checking for dld_init in -ldld""... $ac_c" 1>&6
-echo "configure:13591: checking for dld_init in -ldld" >&5
+echo "configure:13689: checking for dld_init in -ldld" >&5
ac_lib_var=`echo dld'_'dld_init | sed 'y%./+-%__p_%'`
xe_check_libs=" -ldld "
cat > conftest.$ac_ext <<EOF
-#line 13596 "configure"
+#line 13694 "configure"
#include "confdefs.h"
/* Override any gcc2 internal prototype to avoid an error. */
/* We use char because int might match the return type of a gcc2
dld_init()
; return 0; }
EOF
-if { (eval echo configure:13607: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
+if { (eval echo configure:13705: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
rm -rf conftest*
eval "ac_cv_lib_$ac_lib_var=yes"
else
xealias=$internal_configuration
echo "checking how to build dynamic libraries for ${xehost}" 1>&6
-echo "configure:13652: checking how to build dynamic libraries for ${xehost}" >&5
+echo "configure:13750: checking how to build dynamic libraries for ${xehost}" >&5
# Transform *-*-linux* to *-*-linux-gnu*, to support old configure scripts.
case "$xehost" in
*-*-linux-gnu*) ;;
XEGCC=yes
else
echo $ac_n "checking checking whether we are using GNU C""... $ac_c" 1>&6
-echo "configure:13680: checking checking whether we are using GNU C" >&5
+echo "configure:13778: checking checking whether we are using GNU C" >&5
cat > conftest.$ac_ext <<EOF
-#line 13682 "configure"
+#line 13780 "configure"
#include "confdefs.h"
#ifdef __GNUC__
fi
echo $ac_n "checking how to produce PIC code""... $ac_c" 1>&6
-echo "configure:13704: checking how to produce PIC code" >&5
+echo "configure:13802: checking how to produce PIC code" >&5
wl=
can_build_shared=yes
# Check to make sure the dll_cflags actually works.
echo $ac_n "checking if PIC flag ${dll_cflags} really works""... $ac_c" 1>&6
-echo "configure:13800: checking if PIC flag ${dll_cflags} really works" >&5
+echo "configure:13898: checking if PIC flag ${dll_cflags} really works" >&5
save_CFLAGS="$CFLAGS"
CFLAGS="$CFLAGS $dll_cflags -DPIC"
cat > conftest.$ac_ext <<EOF
-#line 13804 "configure"
+#line 13902 "configure"
#include "confdefs.h"
int main() {
int x=0;
; return 0; }
EOF
-if { (eval echo configure:13811: \"$ac_compile\") 1>&5; (eval $ac_compile) 2>&5; }; then
+if { (eval echo configure:13909: \"$ac_compile\") 1>&5; (eval $ac_compile) 2>&5; }; then
rm -rf conftest*
# On HP-UX, the stripped-down bundled CC doesn't accept +Z, but also
xldf=
xcldf=
echo $ac_n "checking if C compiler can produce shared libraries""... $ac_c" 1>&6
-echo "configure:13842: checking if C compiler can produce shared libraries" >&5
+echo "configure:13940: checking if C compiler can produce shared libraries" >&5
if test "$XEGCC" = yes; then
xcldf="-shared"
xldf="-shared"
xe_libs=
ac_link='${CC-cc} -o conftest $CFLAGS '"$xe_cppflags $xe_ldflags"' conftest.$ac_ext '"$xe_libs"' 1>&5'
cat > conftest.$ac_ext <<EOF
-#line 13893 "configure"
+#line 13991 "configure"
#include "confdefs.h"
int main() {
int x=0;
; return 0; }
EOF
-if { (eval echo configure:13900: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
+if { (eval echo configure:13998: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
rm -rf conftest*
cc_produces_so=yes
else
if test "$XEGCC" = yes; then
# Check if gcc -print-prog-name=ld gives a path.
echo $ac_n "checking for ld used by GCC""... $ac_c" 1>&6
-echo "configure:13925: checking for ld used by GCC" >&5
+echo "configure:14023: checking for ld used by GCC" >&5
ac_prog=`($CC -print-prog-name=ld) 2>&5`
case "$ac_prog" in
# Accept absolute paths.
esac
else
echo $ac_n "checking for GNU ld""... $ac_c" 1>&6
-echo "configure:13950: checking for GNU ld" >&5
+echo "configure:14048: checking for GNU ld" >&5
fi
if test -z "$LTLD"; then
# Check to see if it really is or isn't GNU ld.
echo $ac_n "checking if the linker is GNU ld""... $ac_c" 1>&6
-echo "configure:13988: checking if the linker is GNU ld" >&5
+echo "configure:14086: checking if the linker is GNU ld" >&5
# I'd rather use --version here, but apparently some GNU ld's only accept -v.
if $LTLD -v 2>&1 </dev/null | egrep '(GNU|with BFD)' 1>&5; then
xe_gnu_ld=yes
# OK - only NOW do we futz about with ld.
# See if the linker supports building shared libraries.
echo $ac_n "checking whether the linker supports shared libraries""... $ac_c" 1>&6
-echo "configure:14016: checking whether the linker supports shared libraries" >&5
+echo "configure:14114: checking whether the linker supports shared libraries" >&5
dll_ld=$CC
dll_ldflags=$LDFLAGS
ld_shlibs=yes
for ac_func in dlerror _dlerror
do
echo $ac_n "checking for $ac_func""... $ac_c" 1>&6
-echo "configure:14231: checking for $ac_func" >&5
+echo "configure:14329: checking for $ac_func" >&5
cat > conftest.$ac_ext <<EOF
-#line 14234 "configure"
+#line 14332 "configure"
#include "confdefs.h"
/* System header to define __stub macros and hopefully few prototypes,
which can conflict with char $ac_func(); below. */
; return 0; }
EOF
-if { (eval echo configure:14257: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
+if { (eval echo configure:14355: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
rm -rf conftest*
eval "ac_cv_func_$ac_func=yes"
else
fi
cat > conftest.$ac_ext <<EOF
-#line 14296 "configure"
+#line 14394 "configure"
#include "confdefs.h"
int main(int c,char *v[]){return 0;}
EOF
-if { (eval echo configure:14300: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest && (./conftest; exit $?) 2>&5
+if { (eval echo configure:14398: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest && (./conftest; exit $?) 2>&5
then
:
else
projects / chise / xemacs-chise.git- / blobdiff