@item Manages unread messages.
@item Interactive thread display.
@item Folder Mode shows the list of subscribed folders.
-@item Message Cache, Disconnected Operation (Read Only).
+@item Message Cache, Disconnected Operation.
@item MH-like FCC. (Fcc: %Backup and Fcc: $Backup is allowed).
@item MIME compliant (by SEMI).
@item Transmission of news and mail are unified by Message transmitting draft.
Recommended combination of APEL, FLIM and SEMI are following:
@itemize @minus
-@item APEL 10.5, FLIM 1.14.5 and SEMI 1.14.5
+@item APEL 10.6, FLIM 1.14.6 and SEMI 1.14.6
@end itemize
You can also use many other FLIM/SEMI variants. Combination of the
confirmed to work.
@itemize @minus
-@item APEL 10.5, SLIM 1.14.9, SEMI 1.14.5
-@item APEL 10.5, CLIME 1.14.5, EMIKO 1.14.1
+@item APEL 10.6, SLIM 1.14.9, SEMI 1.14.5
+@item APEL 10.6, CLIME 1.14.5, EMIKO 1.14.1
@end itemize
You have to re-install Wanderlust if you upgraded APEL, FLIM or SEMI.
Wanderlust uses ELMO as it's interface, so you can use every folder types
supported by ELMO.
-As of version @value{VERSION}, 11 types of folders are predefined. These are
-IMAP, NNTP, LocalDir(MH), Maildir, News Spool, Archive, POP, Multi, Filter,
-Pipe and Internal folder types.
+As of version @value{VERSION}, 13 types of folders are predefined. These
+are IMAP, NNTP, LocalDir(MH), Maildir, News Spool, Archive, POP,
+Shimbun, Namazu, Multi, Filter, Pipe and Internal folder types.
@menu
* IMAP Folder:: @samp{%} -- IMAP folder
@example
@group
-'mark
-'sendlog
-'cache/00 - 1F
+@samp{'flag} [@samp{/} @var{global-flag}]
+@samp{'sendlog}
+@samp{'cache/00} - @samp{'cache/1F}
@end group
@end example
-A folder named @samp{'mark} is a special virtual folder which collects
-messages which have important mark @samp{$}.
+A folder named @samp{'flag} is a special virtual folder which collects
+messages which have @var{global-flag}.
-You can review important messages at once after you put important marks
-on the messages in the different folders.
+Now, @samp{important} flag is supported as @var{global-flag}. You can
+review important messages at once after you put important marks on the
+messages in the different folders.
-In this folder, if you delete message, important mark @samp{$} put on
-the message is removed. If you append messages to this folder, the
-message will have @samp{$} mark.
-
-(Can't remove important mark @samp{$} on IMAP server from @samp{'mark}
-folder. If you want IMAP folder's message remove from @samp{'mark}
-folder, remove important mark at IMAP Folder.)
+In this folder, if you delete message, @var{global-flag} put on the
+message is removed. If you append messages to this folder, the message
+will have @var{global-flag}.
A folder named @samp{'sendlog} is a virtual folder which collects
@cindex Mark, Temporary
There are four temporary marks,
-@samp{*}, @samp{d}, @samp{o} and @samp{O}.
+@samp{*}, @samp{d}, @samp{D}, @samp{o}, @samp{O}, @samp{i} and @samp{~}.
Temporary marks indicates message operations.
@table @samp
@item d
The mark to dispose. You can put @samp{d} by typing @kbd{d} key.
+@item D
+The mark to force delete. You can put @samp{D} by typing @kbd{D} key.
+
@item o
The mark to refile.
After you type @kbd{o} key, prompt appears to input refile destination.
You can put this mark by typing @kbd{O} key.
The difference between this mark and refile mark is,
this mark does not delete the message while latter does.
+
+@item i
+The mark to prefetch reserved.
+You can put this mark by typing @kbd{i} key.
+
+@item ~
+The mark to resend reserved.
+After you type @kbd{~} key, prompt appears to input address to resend.
+Your answer is printed in the summary line.
@end table
@kbd{x} key executes action for temporary marks, respectively.
@subsection Persistent Marks
-There are five persistent marks,
-@samp{N}, @samp{U}, @samp{!}, @samp{u} and @samp{$}.
+There are five persistent marks, @samp{N}, @samp{?}, @samp{U}, @samp{!},
+@samp{u}, @samp{A}, @samp{&} and @samp{$}.
The persistent mark indicates the message's status and it is saved.
Each persistent mark indicates:
@table @samp
@item N
It is new message.
+@item ?
+It is new but cached message.
@item U
It is unread message.
@item !
It is unread but cached message.
@item u
It is read but it is not cached.
+@item A
+It is already replied message.
+@item &
+It is already replied but cached message.
@item $
It is important message. You can put @samp{$} mark by typing @kbd{$}
key (if already exists, the mark is deleted). It is convenient to put
persistent mark.
@end table
-@samp{N}, @samp{U} and @samp{u} indicates that the message have no
-cache. Messages with the marks other than these, you can read them in
-the offline status even they are in the IMAP folder or netnews folder.
+@samp{N}, @samp{U}, @samp{u}, @samp{A} indicates that the message have
+no cache. Messages with the marks other than these, you can read them
+in the offline status even they are in the IMAP folder or netnews
+folder.
Among messages with persistent marks, ones with marks specified by
@code{wl-summary-expire-reserve-marks} are excluded from the expiration
The initial setting is 80.
Width of summary line. If @code{nil}, summary line's width is as is.
+@item wl-summary-print-argument-within-window
+@vindex wl-summary-print-argument-within-window
+The initial setting is @code{nil}.
+If non-nil, the action argument is always printed on right side of
+window.
+
@item wl-summary-from-width
@vindex wl-summary-from-width
The initial setting is 17.
@lisp
@group
-("o" "O" "D")
+("o" "O" "D" "d" "i")
@end group
@end lisp
@lisp
@group
-("D")
+("D" "d")
@end group
@end lisp
@end group
@end example
-Per default, there are 10 following sub-functions.
+Per default, there are 13 following sub-functions.
@example
'header: Inserts the specified string at the bottom of the header.
@lisp
@group
(list wl-summary-important-mark
- wl-summary-new-mark
+ wl-summary-new-uncached-mark
+ wl-summary-new-cached-mark
wl-summary-unread-mark
wl-summary-unread-uncached-mark
wl-summary-unread-cached-mark)
@lisp
@group
-(list wl-summary-new-mark)
+(list wl-summary-new-uncached-mark
+ wl-summary-new-cached-mark)
@end group
@end lisp