* Disconnected Operations:: Off-Line management
* Expire and Archive:: Automatic expiration and archiving of messages
* Scoring:: Score of the messages
+* Split messages:: Splitting messages
* Address Book:: Management of Address Book
* Customization:: Customizing Wanderlust
* Terminology:: Terminologies
Recommended combination of APEL, FLIM and SEMI are following:
@itemize @minus
-@item APEL 10.3, FLIM 1.14.3 and SEMI 1.14.3
+@item APEL 10.4, FLIM 1.14.4 and SEMI 1.14.4
@end itemize
You can also use many other FLIM/SEMI variants. Combination of the
confirmed to work.
@itemize @minus
-@item APEL 10.2, Chao 1.14.1, REMI 1.14.2
-@item APEL 10.2, SLIM 1.14.3, EMY 1.13.9
+@item APEL 10.4, SLIM 1.14.9, SEMI 1.14.4
+@item APEL 10.4, CLIME 1.14.5, EMIKO 1.14.1
@end itemize
You have to re-install Wanderlust if you upgraded APEL, FLIM or SEMI.
of Emacsen.
It is effective only when your Emacs can define @code{mail-user-agent}.
-@xref{Mail Methods, , ,emacs-ja, The Emacs Editor}.
+@xref{Mail Methods, , ,emacs, The Emacs Editor}.
@lisp
@group
If the message at current cursor point has
encapsulates multiple messages using MIME,
de-capsulate and extract them on the current folder.
+If it is invoked in non-writable folder or it is called with prefix
+argument, it asks the destination folder.
(@code{wl-summary-burst})
@item @@
The initial setting is 17.
Width of sender part of summary line.
-@item wl-summary-subject-length-limit
-@vindex wl-summary-subject-length-limit
-The initial setting is @code{nil}. Specify the limit for the length of
-subject parts in summary. @code{nil} means unlimited.
-
@item wl-summary-indent-length-limit
@vindex wl-summary-indent-length-limit
The initial setting is 46.
Scrolls the message forward. When the bottom of the message is hit,
moves to the next message.
(@code{wl-message-wheel-up})
+
+@item D
+@kindex D (Message)
+@findex wl-message-delete-current-part
+Delete the part under cursor. In fact it appends modified message to
+the current folder then moves old one to trash folder. Therefore the
+message number will be changed.
+(@code{wl-message-delete-current-part})
@end table
@section Customizable Variables
@item C-c C-y
@kindex C-c C-y (Draft)
@findex wl-draft-yank-original
-Cites the content of the current message buffer.
+Cites the content of the current message buffer (the part under cursor).
+If the region is active, cites the region (it affects only if
+@code{transient-mark-mode} (on GNU Emacs) or @code{zmacs-regions}
+(on XEmacs) is Non-nil).
(@code{wl-draft-yank-original})
@item C-c C-p
The initial setting is @code{nil}.
This is the SMTP server name for mail transmission.
+@item wl-smtp-posting-port
+@vindex wl-smtp-posting-port
+The initial setting is @code{nil}.
+This is the SMTP port number for mail transmission.
+If @code{nil}, default SMTP port number (25) is used.
+
@item wl-smtp-posting-user
@vindex wl-smtp-posting-user
The initial setting is @code{nil}.
@end table
-@node Scoring, Address Book, Expire and Archive, Top
+@node Scoring, Split messages, Expire and Archive, Top
@chapter Score of the Messages
@cindex Scoring
@c @cindex Kill File
@end example
-@node Address Book, Customization, Scoring, Top
+@node Split messages, Address Book, Scoring, Top
+@chapter Message splitting
+@cindex Split messages
+
+You can use @code{elmo-split} to split message in folder
+@code{elmo-split-folder} a la @command{procmail} according to some
+specified rules. To use this feature, set as follows in your
+@file{~/.emacs} at first.
+
+@lisp
+(autoload 'elmo-split "elmo-split" "Split messages on the folder." t)
+@end lisp
+
+Then you can invoke @kbd{M-x elmo-split} to split messages according to
+@code{elmo-split-rule}. On the other hand, invoke @kbd{C-u M-x elmo-split}
+to do a rehearsal (do not split actually).
+
+We will describe how to specify the rule. First of all, see following
+example, please.
+
+@lisp
+@group
+(setq elmo-split-rule
+ ;; @r{Store messages from spammers into @samp{+junk}}
+ '(((or (address-equal from "i.am@@spammer")
+ (address-equal from "dull-work@@dull-boy")
+ (address-equal from "death-march@@software")
+ (address-equal from "ares@@aon.at")
+ (address-equal from "get-money@@richman"))
+ "+junk")
+ ;; @r{Store messages from mule mailing list into @samp{%mule}}
+ ((equal x-ml-name "mule") "%mule")
+ ;; @r{Store messages from wanderlust mailing list into @samp{%wanderlust}}
+ ;; @r{and continue evaluating following rules}
+ ((equal x-ml-name "wanderlust") "%wanderlust" continue)
+ ;; @r{Store messages from Yahoo user into @samp{+yahoo-@{username@}}}
+ ((match from "\\(.*\\)@@yahoo\\.com")
+ "+yahoo-\\1")
+ ;; @r{Store unmatched mails into @samp{+inbox}}
+ (t "+inbox")))
+@end group
+@end lisp
+
+The basic unit of the rule is a combination like
+
+@lisp
+(@samp{CONDITION} @samp{FOLDER} [@code{continue}])
+@end lisp
+
+The 1st element @samp{CONDITION} is a balanced expression (sexp). Its
+grammar will be explained below. The 2nd element @samp{FOLDER} is the
+name of the folder to split messages into. When the 3rd element
+@code{continue} is specified as symbol, evaluating rules is not stopped
+even when the condition is satisfied.
+
+The grammar for @samp{CONDITION} is as follows. See example above to
+learn how to write the condition practically.
+
+@enumerate
+@item
+Functions which accept argument @samp{FIELD-NAME} and @samp{VALUE}.
+(@samp{FIELD-NAME} is a symbol that describes the field name)
+
+@table @code
+@item @code{equal}
+True if the field value equals to @samp{VALUE}.
+Case of the letters are ignored.
+@item @code{match}
+True if the field value matches to VALUE.
+@samp{VALUE} can contain @code{\&} and @code{\N} which will substitute
+from matching @code{\(\)} patterns in the previous @samp{VALUE}.
+@item @code{address-equal}
+True if one of the addresses in the field equals to
+@samp{VALUE}. Case of the letters are ignored.
+@item @code{address-match}
+True if one of the addresses in the field matches to
+@samp{VALUE}.
+@samp{VALUE} can contain @code{\&} and @code{\N} which will substitute
+from matching @code{\(\)} patterns in the previous @samp{VALUE}.
+@end table
+
+@item
+Functions which accept any number of arguments.
+
+@table @code
+@item @code{or}
+True if one of the argument returns true.
+@item @code{and}
+True if all of the arguments return true.
+@end table
+
+@item
+A symbol.
+
+When a symbol is specified, it is evaluated.
+@end enumerate
+
+
+@node Address Book, Customization, Split messages, Top
@chapter Address Book
@cindex Address Book
projects / elisp / wanderlust.git / blobdiff