@pindex APEL
@pindex FLIM
@pindex SEMI
-@pindex tm
-SEMI or tm must be installed to make Wanderlust work correctly.
+SEMI must be installed to make Wanderlust work correctly.
-SEMI does not run on Emacs 19.28 or earlier
-@footnote{SEMI runs on Emacs 19.34. @*
-@uref{http://www.jpl.org/elips/INSTALL-SEMI-ja.html} describes how to.},
-so you must install tm, the predecessor of SEMI. (tm version 8.7 or later
-is needed.)
-
-However, SEMI is recommended because of its wider functionality.
-
-Refer to the documents of each package for detailed installation procedure.
-
-SEMI and tm can be downloaded from these sites:
+SEMI can be downloaded from these sites:
@example
@group
SEMI: ftp://ftp.m17n.org/pub/mule/semi/
-tm: http://cvs.m17n.org/tomo/comp/emacsen/tm/tm-8/
@end group
@end example
@samp{make install} will do the job. (In XEmacs 21, @samp{make
install-package}.)
+Refer to the documents of each package for detailed installation
+procedure @footnote{If you want to use SEMI on Emacs 19.34. @*
+@uref{http://www.jpl.org/elips/INSTALL-SEMI-ja.html} (In Japanese)
+may help you.}.
+
+
Recommended combination of APEL, FLIM and SEMI are following:
@itemize @minus
-@item APEL 10.3, FLIM 1.14.2 and SEMI 1.14.3
+@item APEL 10.3, FLIM 1.14.3 and SEMI 1.14.3
@end itemize
You can also use many other FLIM/SEMI variants. Combination of the
@item APEL 10.2, SLIM 1.14.3, EMY 1.13.9
@end itemize
-You have to re-install Wanderlust if you upgraded APEL, FLIM, SEMI or
-tm.
+You have to re-install Wanderlust if you upgraded APEL, FLIM or SEMI.
@node Download, Install, MIME Modules, Start Me Up
(autoload 'wl "wl" "Wanderlust" t)
(autoload 'wl-draft "wl-draft" "Write draft with Wanderlust." t)
-;; @r{Directory where icons are placed (XEmacs or Emacs 21).}
-;; @r{Default: @code{nil}.}
-;; @r{(This is not required if Wanderlust is installed as XEmacs package)}
-(setq wl-icon-dir "~/work/wl/etc")
+;; @r{Directory where icons are placed.}
+;; @r{Default: the peculiar value to the running version of Emacs.}
+;; @r{(This is not required if the default value has been set properly)}
+(setq wl-icon-directory "~/work/wl/etc")
;; @r{SMTP server for mail posting. Default: @code{nil}}
(setq wl-smtp-posting-server "your.smtp.example.com")
If you start Wanderlust with prefix argument like @kbd{C-u M-x wl}, you
can skip folder checking.
+Basically, you will handle messages in wanderlust while you come and go
+from/to each of the following buffers.
+
+@table @samp
+@item Folder Buffer
+You can see the list of folders. You can select some folder and go into the summary
+of it. You can subscribe new folder or edit subscription list.
+@item Summary Buffer
+You can see the list of messages in the folder. You can select message and view its
+contents, and reply to some message. You can delete ones or move ones to another
+folder.
+@item Message Buffer
+You can see the contents of the message. You can save part to disk or open in external
+programs.
+@item Draft Buffer
+You can edit message.
+@end table
+
+Details of each ones are explained later.
+
@node Folders, Folder, Start Me Up, Top
@chapter Wanderlust's folders
@end group
@end example
+Default value of the path of namazu index can be assigned by @code{elmo-nmz-default-index-path}.
+
+Example:
+
+@example
+@group
+[wanderlust] -> search messages matched with
+ "wanderlust" from the default index
+[semi flim]~/Mail/semi -> search "semi flim" from the index
+ in the directory "~/Mail/semi"
+@end group
+@end example
+
+Tips
+
+If you want to use space in folder entry, @kbd{C-q @key{SPC}} will help you.
+
@node Multi Folder, Filter Folder, Namazu Folder, Folders
@section Multi Folder
@example
@group
'mark
-@r{or}
+'sendlog
'cache/00 - 1F
@end group
@end example
folder. If you want IMAP folder's message remove from @samp{'mark}
folder, remove important mark at IMAP Folder.)
+
+A folder named @samp{'sendlog} is a virtual folder which collects
+cached messages which are recoded on @file{~/.elmo/sendlog}.
+It might be useful when you forgot to add cc for yourself.
+To use this, you should set @code{wl-draft-use-cache} to non-nil
+so that sent messages are cached.
+
+
You can access cached messages fetched via network by accessing
folders named @samp{'cache/00} - @samp{'cache/1F}. 00 - 1F are
the name of the subdirectories of the cache directory
@subsection Buffer Cache and Prefetching
-If the value of @code{elmo-use-buffer-cache} is non-nil, the messages
-that are read are kept in the cache buffer. It is called `buffer
-cache'. The number of cache buffer is specified by
-@code{elmo-buffer-cache-size}.
+The messages that are read are kept in the cache buffer. It is called
+`buffer cache'. The number of cache buffer is specified by
+@code{wl-message-buffer-cache-size}.
There are message prefetching mechanism in the Wanderlust that
-prefetches next message while you are reading. This function requires
-that the value of @code{elmo-use-buffer-cache} is non-nil.
+prefetches next message while you are reading.
You can control the message prefetching mechanism by these two
variables.
@table @code
-@item wl-cache-prefetch-folder-type-list
-@vindex wl-cache-prefetch-folder-type-list
-The initial setting is the list shown below:
-@lisp
-@group
-(nntp imap4)
-@end group
-@end lisp
-
-@noindent
-It specifies the folder types in which message prefetching is enabled.
-In the initial setting, multi folder that contains localdir and imap4
-prefetches only imap4 messages. This variable precedes the value of
-@code{wl-cache-prefetch-folder-list}.
-
-If you want to prefetch localdir and localnews also, following setting
-is needed.
+@item wl-message-buffer-prefetch-folder-type-list
+@vindex wl-message-buffer-prefetch-folder-type-list
+The initial setting is @code{t}. In this case, prefetch messages in all
+folders.
+If it is a list of folder types, it specifies the folder types in which
+message prefetching is enabled.
+Following is an example (prefetch messages in nntp and imap4 folders)
@lisp
@group
-(setq wl-cache-prefetch-folder-type-list
- '(nntp imap4 localdir localnews))
+(setq wl-message-buffer-prefetch-folder-type-list
+ '(nntp imap4))
@end group
@end lisp
-@item wl-cache-prefetch-folder-list
-@vindex wl-cache-prefetch-folder-list
+In this case, multi folder that contains localdir and imap4 prefetches
+only imap4 messages. This variable precedes the value of
+@code{wl-message-buffer-prefetch-folder-list}.
+
+@item wl-message-buffer-prefetch-folder-list
+@vindex wl-message-buffer-prefetch-folder-list
The initial setting is @code{nil}.
A list of regexp of folders to enable message prefetching.
@end table
@kindex m i (Summary)
@findex wl-summary-target-mark-prefetch
Prefetch all messages which have target mark @samp{*}.
+With prefix argument, prefetch all targets even if some of them are cached.
(@code{wl-summary-target-mark-prefetch})
@item m R
@item wl-auto-select-next
@vindex wl-auto-select-next
-The initial setting is @code{nil}. If non-nil, jump to next summary
-automatically. If @code{unread}, jump to next unread folder's summary
-after confirmation. If @code{skip-no-unread}, unread folders are
-automatically skipped.
+The initial setting is @code{nil}. This controls behavior when there is
+no unread message in current summary.
+
+@example
+nil: asks whether you want to go back to folder mode
+'unread: asks whether you want to go to next unread folder
+ If the next one comes to be possessing no unread message
+ by treatment of cross-posted messages or Scoring, then
+ asks whether you want to go to next to next folder.
+'skip-no-unread: similar as unread
+ But does not ask before going to next to next folder.
+otherwise: asks whether you want to go to next unread folder
+@end example
+
+It might be useful to set @code{'skip-no-unread} for people who
+want to continue reading by just pressing and pressing space key.
@item wl-thread-insert-opened
@vindex wl-thread-insert-opened
@vindex wl-summary-weekday-name-lang
The initial setting is @samp{ja}. Specify language of the weekday.
@samp{en} displays English, @samp{fr} displays French, @samp{de}
-displays Deutsch.
+displays Deutsch. You should rescan summary view after changing this value.
@item wl-summary-fix-timezone
@vindex wl-summary-fix-timezone
A cons cell to specify the rate of summary and message window.
car:cdr corresponds summary:message.
-@item wl-summary-recenter
-@vindex wl-summary-recenter
-The initial setting is t.
-If non-nil, cursor point is moved to the center of the summary window.
-
-@item wl-summary-indent-length-limit
-@vindex wl-summary-indent-length-limit
-The initial setting is 46.
-Specify the limit of thread indent level.
-If nil, max indent level is unlimited.
-
@item wl-summary-no-from-message
@vindex wl-summary-no-from-message
The initial setting is @samp{nobody@@nowhere?}. A string which is
The initial setting is @samp{(WL:No Subject in original.)}. A string
which is displayed when there's no @samp{Subject:} field in the message.
-@item wl-summary-width
-@vindex wl-summary-width
-The initial setting is 80.
-Width of summary line. If @code{nil}, summary line's width is as is.
-
@item wl-summary-use-frame
@vindex wl-summary-use-frame
The initial setting is @code{nil}.
@kbd{P}, @kbd{n}, @kbd{N} toggles the direction of cursor move. If you
want to aware of reading direction, set this to @code{t}.
-@item wl-from-width
-@vindex wl-from-width
+@item wl-summary-width
+@vindex wl-summary-width
+The initial setting is 80.
+Width of summary line. If @code{nil}, summary line's width is as is.
+
+@item wl-summary-from-width
+@vindex wl-summary-from-width
The initial setting is 17.
Width of sender part of summary line.
+@item wl-summary-subject-length-limit
+@vindex wl-summary-subject-length-limit
+The initial setting is @code{nil}. Specify the limit for the length of
+subject parts in summary. @code{nil} means unlimited.
+
+@item wl-summary-indent-length-limit
+@vindex wl-summary-indent-length-limit
+The initial setting is 46.
+Specify the limit of thread indent level. @code{nil} means unlimited
+indent level.
+If you set this to @code{nil} you should set @code{wl-summary-width}
+to @code{nil}, too.
+
+@item wl-summary-recenter
+@vindex wl-summary-recenter
+The initial setting is t.
+If non-nil, cursor point is moved to the center of the summary window.
+
@item wl-summary-divide-thread-when-subject-changed
@vindex wl-summary-divide-thread-when-subject-changed
The initial setting is @code{nil}. If non-nil, thread is split if
buffer already exists, summary status is not automatically updated and
cursor position is saved.
-@item wl-summary-update-confirm-threshold
-@vindex wl-summary-update-confirm-threshold
+@item elmo-folder-update-threshold
+@vindex elmo-folder-update-threshold
The initial setting is 500. If updated message number is larger than
-this value, confirm whether drop them or not.
+this value, confirm whether drop them or not (in the case where the value
+of @code{elmo-folder-update-confirm} is non-nil).
+
+@item elmo-folder-update-confirm
+@vindex elmo-folder-update-confirm
+The initial setting is @code{t}. If the value is non-nil, do check with
+@code{elmo-folder-update-threshold}.
@item wl-summary-always-sticky-folder-list
@vindex wl-summary-always-sticky-folder-list
If a message is already marked as temporal marks in this list, the
message is skipped at cursor move.
-@item wl-fetch-confirm-threshold
-@vindex wl-fetch-confirm-threshold
+@item elmo-message-fetch-threshold
+@vindex elmo-message-fetch-threshold
The initial setting is 30000 (bytes). If displaying message has larger
size than this value, Wanderlust confirms whether fetch the message or
-not. If @code{nil}, the message is fetched without confirmation.
+not (in the case where the value of @code{elmo-message-fetch-confirm}
+is non-nil).
+
+@item elmo-message-fetch-confirm
+@vindex elmo-message-fetch-confirm
+The initial setting is @code{t}. If the value is non-nil, do check with
+@code{elmo-message-fetch-threshold}.
@item wl-prefetch-threshold
@vindex wl-prefetch-threshold
prefetch the message or not if the message has larger size than
@code{wl-prefetch-threshold}.
-@item wl-cache-fetch-threshold
-@vindex wl-cache-fetch-threshold
-The initial setting is 30000 (bytes). The messages which have larger
-size than @code{wl-fetch-confirm-threshold} are skipped buffer caching
-mechanism. If @code{nil}, any messages are prefetched by buffer caching
-mechanism.
-
@item elmo-imap4-use-cache
@vindex elmo-imap4-use-cache
The initial setting is @code{t}. If non-nil, messages read via IMAP4
The initial setting is @code{t}. If non-nil, messages read via POP3 are
cached.
+@item elmo-shimbun-use-cache
+@vindex elmo-shimbun-use-cache
+The initial setting is @code{t}. If non-nil, messages read in Shimbun
+folders are cached.
+
@item wl-folder-process-duplicates-alist
@vindex wl-folder-process-duplicates-alist
The initial setting is @code{nil}.
@example
'header: Inserts the specified string at the bottom of the header.
+'header-top: Inserts the specified string at the top of the header.
'header-file: Inserts the specified file at the bottom of the header.
'x-face: Inserts @samp{X-Face:} field with the content of the specified file.
'top: Inserts the specified string at the top of the body.
'body-file: Replaces the body with the content of the specified file.
'bottom: Inserts the specified string at the bottom of the body.
'bottom-file: Inserts the specified file at the top of the body.
+'part-top: Inserts the specified string at the top of the current part.
+'part-bottom: Inserts the specified string at the bottom of the current part.
'template: Applies the specified template.
(refer to the next subsection)
@end example
basis. Refer to @code{wl-reset-plugged-alist} also.
Usually, when Wanderlust starts up, the plugged state of each port is
-read from @file{~/.folder} and @code{wl-smtp-posting-server},
+read from @file{~/.folders} and @code{wl-smtp-posting-server},
@code{wl-nntp-posting-server} and so on. If you want to change the
plugged state of these ports or to add other ports, configure
@code{wl-make-plugged-hook} with a function.
@end group
@end lisp
+You can complete address with BBDB by @kbd{M-@key{TAB}}
+in draft buffer.
+
+
@node supercite, mu-cite, BBDB, Living with other packages
@subsection sc.el(supercite), sc-register.el
@pindex sc
@lisp
@group
-(autoload 'sc-cite-original "sc" nil t)
-(setq mail-yank-hooks 'sc-cite-original)
-(setq sc-preferred-header-style 1)
-(setq sc-electric-references-p nil)
-(setq sc-citation-leader "")
-(setq sc-load-hook '(lambda () (require 'sc-register)))
-(setq sc-preferred-attribution 'registeredname)
+(autoload 'sc-cite-original "supercite" nil t)
+(add-hook 'mail-citation-hook 'sc-cite-original)
@end group
@end lisp
@subsubsection x-face-e21 (for Emacs 21.x)
@pindex x-face-e21
-If you use @file{x-face-e21.el} (@uref{ftp://jpl.org/pub/elisp/})
-with bitmap-mule (@uref{ftp://ftp.jpl.org/pub/elisp/bitmap/}),
+If you use @file{x-face-e21.el} (@uref{ftp://jpl.org/pub/elisp/}),
do the following:
@lisp
@group
-(require 'bitmap)
(autoload 'x-face-decode-message-header "x-face-e21")
(setq wl-highlight-x-face-function 'x-face-decode-message-header)
@end group
projects / elisp / wanderlust.git / blobdiff