-This is ../info/xemacs-faq.info, produced by makeinfo version 3.12s
-from xemacs-faq.texi.
+This is ../info/xemacs-faq.info, produced by makeinfo version 4.0b from
+xemacs-faq.texi.
INFO-DIR-SECTION XEmacs Editor
START-INFO-DIR-ENTRY
-* FAQ: (xemacs-faq). XEmacs FAQ.
+* FAQ: (xemacs-faq). XEmacs FAQ.
END-INFO-DIR-ENTRY
\1f
This is the guide to the XEmacs Frequently Asked Questions list--a
compendium of questions and answers pertaining to one of the finest
-programs ever written. It is much more than just a Text Editor.
+programs ever written. XEmacs is much more than just a Text Editor.
- This FAQ is freely redistributable. I take no liability for the
-correctness and safety of any procedures or advice given here. This
-FAQ is distributed in the hope that it will be useful, but WITHOUT ANY
-WARRANTY; without even the implied warranty of MERCHANTABILITY or
-FITNESS FOR A PARTICULAR PURPOSE.
+ This FAQ is freely redistributable. This FAQ is distributed in the
+hope that it will be useful, but WITHOUT ANY WARRANTY; without even the
+implied warranty of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.
If you have a Web browser, the official hypertext version is at
-`http://www.xemacs.org/faq/xemacs-faq.html'.
-
- This version is somewhat nicer than the unofficial hypertext versions
-that are archived at Utrecht, Oxford, Smart Pages, and other FAQ
-archives.
+`http://www.xemacs.org/faq/xemacs-faq.html'
* Menu:
* Q1.0.4:: Why Another Version of Emacs?
* Q1.0.5:: Why Haven't XEmacs and GNU Emacs Merged?
* Q1.0.6:: Where can I get help?
-* Q1.0.7:: Where is the mailing list archived?
+* Q1.0.7:: Where are the mailing lists archived?
* Q1.0.8:: How do you pronounce XEmacs?
* Q1.0.9:: What does XEmacs look like?
* Q1.0.10:: Is there a port of XEmacs to Microsoft ('95 or NT)?
* Q1.2.3:: Who contributed to the FAQ in the past?
Internationalization:
-* Q1.3.1:: What is the status of XEmacs v20?
-* Q1.3.2:: What is the status of Asian-language support, aka MULE?
+* Q1.3.1:: What is the status of internationalization support aka MULE (including Asian language support?
+* Q1.3.2:: How can I help with internationalization?
* Q1.3.3:: How do I type non-ASCII characters?
* Q1.3.4:: Can XEmacs messages come out in a different language?
-* Q1.3.5:: Please explain the various input methods in MULE/XEmacs 20.0
-* Q1.3.6:: How do I portably code for MULE/XEmacs 20.0?
+* Q1.3.5:: Please explain the various input methods in MULE/XEmacs
+* Q1.3.6:: How do I portably code for MULE/XEmacs?
* Q1.3.7:: How about Cyrillic Modes?
Getting Started:
* Q1.4.4:: May I see an example of a useful XEmacs Lisp function?
* Q1.4.5:: And how do I bind it to a key?
* Q1.4.6:: What's the difference between a macro and a function?
-* Q1.4.7:: Why options saved with 19.13 don't work with 19.14 or later?
Installation and Trouble Shooting
* Q2.0.10:: After I run configure I find a coredump, is something wrong?
* Q2.0.11:: XEmacs can't resolve host names.
* Q2.0.12:: Why can't I strip XEmacs?
-* Q2.0.13:: Can't link XEmacs on Solaris with Gcc.
-* Q2.0.14:: Make on HP/UX 9 fails after linking temacs
+* Q2.0.13:: I don't need no steenkin' packages. Do I? (NEW)
+* Q2.0.14:: How do I figure out which packages to install? (NEW)
Trouble Shooting:
* Q2.1.1:: XEmacs just crashed on me!
* Q2.1.15:: How to debug an XEmacs problem with a debugger.
* Q2.1.16:: XEmacs crashes in `strcat' on HP/UX 10.
* Q2.1.17:: `Marker does not point anywhere'.
-* Q2.1.18:: 19.14 hangs on HP/UX 10.10.
+* Q2.1.18:: [This question intentionally left blank]
* Q2.1.19:: XEmacs does not follow the local timezone.
* Q2.1.20:: `Symbol's function definition is void: hkey-help-show.'
-* Q2.1.21:: Every so often the XEmacs frame freezes.
+* Q2.1.21:: [This question intentionally left blank]
* Q2.1.22:: XEmacs seems to take a really long time to do some things.
* Q2.1.23:: Movemail on Linux does not work for XEmacs 19.15 and later.
+* Q2.1.24:: XEmacs won't start without network. (NEW)
+* Q2.1.25:: After upgrading, XEmacs won't do `foo' any more! (NEW)
Customization and Options
X Window System & Resources:
* Q3.1.1:: Where is a list of X resources?
* Q3.1.2:: How can I detect a color display?
-* Q3.1.3:: `(set-screen-width)' worked in 19.6, but not in 19.13?
-* Q3.1.4:: Specifying `Emacs*EmacsScreen.geometry' in `.emacs' does not work in 19.15?
+* Q3.1.3:: [This question intentionally left blank]
+* Q3.1.4:: [This question intentionally left blank]
* Q3.1.5:: How can I get the icon to just say `XEmacs'?
* Q3.1.6:: How can I have the window title area display the full path?
* Q3.1.7:: `xemacs -name junk' doesn't work?
Other Unbundled Packages:
* Q4.7.1:: What is AUC TeX? Where do you get it?
* Q4.7.2:: Are there any Emacs Lisp Spreadsheets?
-* Q4.7.3:: Byte compiling AUC TeX on XEmacs 19.14
+* Q4.7.3:: [This question intentionally left blank]
* Q4.7.4:: Problems installing AUC TeX
* Q4.7.5:: Is there a reason for an Emacs package not to be included in XEmacs?
* Q4.7.6:: Is there a MatLab mode?
* Q5.0.8:: Why does edt emulation not work?
* Q5.0.9:: How can I emulate VI and use it as my default mode?
* Q5.0.10:: [This question intentionally left blank]
-* Q5.0.11:: Filladapt doesn't work in 19.15?
+* Q5.0.11:: How do I turn on filladapt for all buffers?
* Q5.0.12:: How do I disable gnuserv from opening a new frame?
* Q5.0.13:: How do I start gnuserv so that each subsequent XEmacs is a client?
* Q5.0.14:: Strange things are happening in Shell Mode.
* Q5.0.15:: Where do I get the latest CC Mode?
* Q5.0.16:: I find auto-show-mode disconcerting. How do I turn it off?
* Q5.0.17:: How can I get two instances of info?
-* Q5.0.18:: I upgraded to XEmacs 19.14 and gnuserv stopped working
+* Q5.0.18:: [This question intentionally left blank]
* Q5.0.19:: Is there something better than LaTeX mode?
* Q5.0.20:: Is there a way to start a new XEmacs if there's no gnuserv running, and otherwise use gnuclient?
* Q5.1.4:: What is the performance hit of `let'?
* Q5.1.5:: What is the recommended use of `setq'?
* Q5.1.6:: What is the typical misuse of `setq' ?
-* Q5.1.7:: I like the the `do' form of cl, does it slow things down?
+* Q5.1.7:: I like the `do' form of cl, does it slow things down?
* Q5.1.8:: I like recursion, does it slow things down?
* Q5.1.9:: How do I put a glyph as annotation in a buffer?
* Q5.1.10:: `map-extents' won't traverse all of my extents!
XEmacs on MS Windows
General Info:
-* Q6.0.1:: What is the status of the XEmacs port to Windows?
-* Q6.0.2:: What flavors of MS Windows are supported?
-* Q6.0.3:: Are binary kits available?
-* Q6.0.4:: Does XEmacs on MS Windows require an X server to run?
+* Q6.0.1:: What is the status of the XEmacs port to Windows?
+* Q6.0.2:: What flavors of MS Windows are supported?
+* Q6.0.3:: Are binary kits available?
+* Q6.0.4:: Does XEmacs on MS Windows require an X server to run?
Building XEmacs on MS Windows:
-* Q6.1.1:: I decided to run with X. Where do I get an X server?
-* Q6.1.2:: What compiler do I need to compile XEmacs?
-* Q6.1.3:: How do I compile for the native port?
-* Q6.1.4:: How do I compile for the X port?
-* Q6.1.5:: How do I compile for Cygnus' Cygwin?
-* Q6.1.6:: What do I need for Cygwin?
+* Q6.1.1:: I decided to run with X. Where do I get an X server?
+* Q6.1.2:: What compiler do I need to compile XEmacs?
+* Q6.1.3:: How do I compile for the native port?
+* Q6.1.4:: How do I compile for the X port?
+* Q6.1.5:: How do I compile for Cygnus' Cygwin?
+* Q6.1.6:: What do I need for Cygwin?
Customization and User Interface:
-* Q6.2.1:: How will the port cope with differences in the Windows user interface?
-* Q6.2.2:: How do I change fonts in XEmacs on MS Windows?
-* Q6.2.3:: Where do I put my `.emacs' file?
+* Q6.2.1:: How will the port cope with differences in the Windows user interface?
+* Q6.2.2:: How do I change fonts in XEmacs on MS Windows?
+* Q6.2.3:: Where do I put my `.emacs' file?
Miscellaneous:
-* Q6.3.1:: Will XEmacs rename all the win32-* symbols to w32-*?
-* Q6.3.2:: What are the differences between the various MS Windows emacsen?
-* Q6.3.3:: What is the porting team doing at the moment?
+* Q6.3.1:: Will XEmacs rename all the win32-* symbols to w32-*?
+* Q6.3.2:: What are the differences between the various MS Windows emacsen?
+* Q6.3.3:: What is the porting team doing at the moment?
+
+Troubleshooting:
+* Q6.4.1:: XEmacs won't start on Windows. (NEW)
Current Events:
available resources.
The previous maintainer of the FAQ was Anthony Rossini
-<rossini@stat.sc.edu>, who started it, after getting tired of hearing
-JWZ complain about repeatedly having to answer questions. Ben Wing
-<ben@xemacs.org> and Chuck Thompson <cthomp@xemacs.org>, the principal
-authors of XEmacs, then took over and Ben did a massive update
-reorganizing the whole thing. At which point Anthony took back over,
-but then had to give it up again. Some of the other contributors to
-this FAQ are listed later in this document.
+<rossini@biostat.washington.edu>, who started it, after getting tired
+of hearing JWZ complain about repeatedly having to answer questions.
+Ben Wing <ben@xemacs.org> and Chuck Thompson <cthomp@xemacs.org>, the
+principal authors of XEmacs, then took over and Ben did a massive
+update reorganizing the whole thing. At which point Anthony took back
+over, but then had to give it up again. Some of the other contributors
+to this FAQ are listed later in this document.
The previous version was converted to hypertext format, and edited by
Steven L. Baur <steve@xemacs.org>. It was converted back to texinfo by
-Hrvoje Niksic <hniksic@xemacs.org>.
-
- The FAQ was then maintained by Andreas Kaempf <andreas@sccon.com>,
-who passed it on to Christian Nyb/o <faq@xemacs.org>, the current FAQ
-maintainer.
+Hrvoje Niksic <hniksic@xemacs.org>. The FAQ was then maintained by
+Andreas Kaempf <andreas@sccon.com>, who passed it on to ChristianNyb/o.
If you notice any errors or items which should be added or amended to
-this FAQ please send email to Christian Nyb/o <faq@xemacs.org>. Include
+this FAQ please send email to Sandra Wambold <faq@xemacs.org>. Include
`XEmacs FAQ' on the Subject: line.
* Menu:
* Q1.0.4:: Why Another Version of Emacs?
* Q1.0.5:: Why Haven't XEmacs and GNU Emacs Merged?
* Q1.0.6:: Where can I get help?
-* Q1.0.7:: Where is the mailing list archived?
+* Q1.0.7:: Where are the mailing lists archived?
* Q1.0.8:: How do you pronounce XEmacs?
* Q1.0.9:: What does XEmacs look like?
* Q1.0.10:: Is there a port of XEmacs to Microsoft ('95 or NT)?
* Q1.2.3:: Who contributed to the FAQ in the past?
Internationalization:
-* Q1.3.1:: What is the status of XEmacs v20?
-* Q1.3.2:: What is the status of Asian-language support, aka MULE?
+* Q1.3.1:: What is the status of internationalization support aka MULE (including Asian language support?
+* Q1.3.2:: How can I help with internationalization?
* Q1.3.3:: How do I type non-ASCII characters?
* Q1.3.4:: Can XEmacs messages come out in a different language?
-* Q1.3.5:: Please explain the various input methods in MULE/XEmacs 20.0
-* Q1.3.6:: How do I portably code for MULE/XEmacs 20.0?
+* Q1.3.5:: Please explain the various input methods in MULE/XEmacs
+* Q1.3.6:: How do I portably code for MULE/XEmacs?
* Q1.3.7:: How about Cyrillic Modes?
Getting Started:
* Q1.4.4:: May I see an example of a useful XEmacs Lisp function?
* Q1.4.5:: And how do I bind it to a key?
* Q1.4.6:: What's the difference between a macro and a function?
-* Q1.4.7:: Why options saved with 19.13 don't work with 19.14 or later?
\1f
File: xemacs-faq.info, Node: Q1.0.1, Next: Q1.0.2, Prev: Introduction, Up: Introduction
Q1.0.2: What is the current version of XEmacs?
----------------------------------------------
- XEmacs 21.1.8 is the current stable version of XEmacs.
-
- XEmacs 20.4 is a minor upgrade from 20.3, containing many bugfixes.
-It was released in February 1998.
+ XEmacs versions 21.1.* are releases made from the current stable
+sources. XEmacs versions 21.2.* are releases made from the development
+sources. Check at `http://www.xemacs.org' for the current minor
+version.
XEmacs 19.16 was the last release of v19, released in November, 1997,
which was also the last version without international language support.
\1f
File: xemacs-faq.info, Node: Q1.0.7, Next: Q1.0.8, Prev: Q1.0.6, Up: Introduction
-Q1.0.7: Where is the mailing list archived?
--------------------------------------------
+Q1.0.7: Where are the mailing lists archived?
+---------------------------------------------
The archives can be found at `http://www.xemacs.org/Lists/Archive'
Q1.0.11: Is there a port of XEmacs to the Macintosh?
----------------------------------------------------
- There has been a port to the MachTen environment of XEmacs 19.13,
-but no patches have been submitted to the maintainers to get this in the
-mainstream distribution.
-
- For the MacOS, there is a port of Emacs 18.59
-(ftp://ftp.cs.cornell.edu/pub/parmet/).
+ Yes, there is a port of XEmacs 19.14, tested on MacOS 7.6.1 and MacOS
+8.5.1 by Pitts Jarvis <pjarvis@ispchannel.com>. It's available at
+`http://homepage.mac.com/pjarvis/xemacs.html'.
\1f
File: xemacs-faq.info, Node: Q1.0.12, Next: Q1.0.13, Prev: Q1.0.11, Up: Introduction
Q1.0.13: Is there a port of XEmacs to OS/2?
-------------------------------------------
- No, and there is no news of anyone working on it.
+ No, but Alexander Nikolaev <avn_1251@mail.ru> is working on it.
\1f
File: xemacs-faq.info, Node: Q1.0.14, Next: Q1.1.1, Prev: Q1.0.13, Up: Introduction
-Q1.0.14: Where can I obtain a printed copy of the XEmacs users manual?
-----------------------------------------------------------------------
+Q1.0.14: Where can I obtain a printed copy of the XEmacs User's Manual?
+-----------------------------------------------------------------------
Pre-printed manuals are not available. If you are familiar with
TeX, you can generate your own manual from the XEmacs sources.
HTML and Postscript versions of XEmacs manuals may be available from
-the XEmacs web site in the future.
+the XEmacs web site in the future. Send requests to <faq@xemacs.org>.
\1f
File: xemacs-faq.info, Node: Q1.1.1, Next: Q1.1.2, Prev: Q1.0.14, Up: Introduction
-----------------------------------------
The FAQ is actively maintained and modified regularly. All links
-should be up to date. All submissions are welcome. E-mail submissions
-to XEmacs FAQ maintainers <faq@xemacs.org>.
+should be up to date. Unfortunately, some of the information is out of
+date - a situation which the FAQ maintainer is working on. All
+submissions are welcome, please e-mail submissions to XEmacs FAQ
+maintainers <faq@xemacs.org>.
Please make sure that `XEmacs FAQ' appears on the Subject: line. If
you think you have a better way of answering a question, or think a
question should be included, we'd like to hear about it. Questions and
-answers included into the FAQ will be edited for spelling and grammar,
+answers included into the FAQ will be edited for spelling and grammar
and will be attributed. Answers appearing without attribution are
-either from versions of the FAQ dated before May 1996, or are from one
-of the four people listed at the top of this document. Answers quoted
-from Usenet news articles will always be attributed, regardless of the
-author.
+either from versions of the FAQ dated before May 1996 or are from
+previous FAQ maintainers. Answers quoted from Usenet news articles will
+always be attributed, regardless of the author.
\1f
File: xemacs-faq.info, Node: Q1.1.2, Next: Q1.1.3, Prev: Q1.1.1, Up: Introduction
* Curtis.N.Bingham <binge@aloft.att.com>
+ * Georges Brun-Cottan <bruncott@dormeur.inria.fr>
+
* Richard Caley <rjc@cogsci.ed.ac.uk>
* Richard Cognot <cognot@ensg.u-nancy.fr>
+ * Mark Daku <daku@nortel.ca>
+
* William G. Dubuque <wgd@martigny.ai.mit.edu>
* Eric Eide <eeide@cs.utah.edu>
+ * Alain Fauconnet <af@biomath.jussieu.fr>
+
* Chris Flatters <cflatter@nrao.edu>
* Evelyn Ginsparg <ginsparg@adra.com>
1.3: Internationalization
=========================
-Q1.3.1: What is the status of XEmacs v20?
------------------------------------------
+Q1.3.1: What is the status of internationalization support aka MULE (including Asian language support?
+------------------------------------------------------------------------------------------------------
- XEmacs v20 is the version of XEmacs that includes MULE
-(Asian-language) support. XEmacs 20.0 was released in February 1997,
-followed by XEmacs 20.2 in May, XEmacs 20.3 in November and XEmacs 20.4
-in February 1998. When compiled without MULE support, 20.4 is
-approximately as stable as 19.16, and probably faster (due to
-additional optimization work.)
-
- As of XEmacs 20.3, version 20 is _the_ supported version of XEmacs.
-This means that 19.16 will optionally receive stability fixes (if any),
-but that all the real development work will be done on the v20 tree.
-
- The incompatible changes in XEmacs 20 include the additional
-byte-codes, new primitive data types (`character', `char-table', and
-`range-table'). This means that the character-integer equivalence
-inherent to all the previous Emacs and XEmacs releases no longer
-applies.
-
- However, to avoid breaking old code, many functions that should
-normally accept characters work with integers, and vice versa. For more
-information, see the Lisp reference manual. Here is a relevant excerpt,
-for your convenience.
-
- In XEmacs version 19, and in all versions of FSF GNU Emacs, a
- "character" in XEmacs Lisp is nothing more than an integer. This
- is yet another holdover from XEmacs Lisp's derivation from
- vintage-1980 Lisps; modern versions of Lisp consider this
- equivalence a bad idea, and have separate character types. In
- XEmacs version 20, the modern convention is followed, and
- characters are their own primitive types. (This change was
- necessary in order for MULE, i.e. Asian-language, support to be
- correctly implemented.)
-
- Even in XEmacs version 20, remnants of the equivalence between
- characters and integers still exist; this is termed the "char-int
- confoundance disease". In particular, many functions such as `eq',
- `equal', and `memq' have equivalent functions (`old-eq',
- `old-equal', `old-memq', etc.) that pretend like characters are
- integers are the same. Byte code compiled under any version 19
- Emacs will have all such functions mapped to their `old-'
- equivalents when the byte code is read into XEmacs 20. This is to
- preserve compatibility - Emacs 19 converts all constant characters
- to the equivalent integer during byte-compilation, and thus there
- is no other way to preserve byte-code compatibility even if the
- code has specifically been written with the distinction between
- characters and integers in mind.
-
- Every character has an equivalent integer, called the "character
- code". For example, the character `A' is represented as the
- integer 65, following the standard ASCII representation of
- characters. If XEmacs was not compiled with MULE support, the
- range of this integer will always be 0 to 255 - eight bits, or one
- byte. (Integers outside this range are accepted but silently
- truncated; however, you should most decidedly _not_ rely on this,
- because it will not work under XEmacs with MULE support.) When
- MULE support is present, the range of character codes is much
- larger. (Currently, 19 bits are used.)
-
- FSF GNU Emacs uses kludgy character codes above 255 to represent
- keyboard input of ASCII characters in combination with certain
- modifiers. XEmacs does not use this (a more general mechanism is
- used that does not distinguish between ASCII keys and other keys),
- so you will never find character codes above 255 in a non-MULE
- XEmacs.
-
- Individual characters are not often used in programs. It is far
- more common to work with _strings_, which are sequences composed of
- characters.
+ Both the stable and development versions of XEmacs include
+internationalization support (aka MULE). MULE currently works on UNIX
+and Linux systems; work for supporting MULE on Windows operating systems
+is in progress. Binaries compiled without MULE support run faster than
+MULE capable XEmacsen.
\1f
File: xemacs-faq.info, Node: Q1.3.2, Next: Q1.3.3, Prev: Q1.3.1, Up: Introduction
-Q1.3.2: What is the status of Asian-language support, aka MULE?
----------------------------------------------------------------
-
- MULE support is now available for UNIX versions of XEmacs.
+Q1.3.2: How can I help with internationalization?
+-------------------------------------------------
If you would like to help, you may want to join the
<xemacs-mule@xemacs.org> mailing list. Especially needed are people
The message-catalog support has mostly been written but doesn't
currently work. The first release of XEmacs 20 will _not_ support it.
-However, menubar localization _does_ work, even in 19.14. To enable
-it, add to your `Emacs' file entries like this:
+However, menubar localization _does_ work. To enable it, add to your
+`Emacs' file entries like this:
- Emacs*XlwMenu.resourceLabels: True
- Emacs*XlwMenu.file.labelString: Fichier
- Emacs*XlwMenu.openInOtherWindow.labelString: In anderem Fenster offnen
+ Emacs*XlwMenu.resourceLabels: True
+ Emacs*XlwMenu.file.labelString: Fichier
+ Emacs*XlwMenu.openInOtherWindow.labelString: In anderem Fenster oeffnen
The name of the resource is derived from the non-localized entry by
removing punctuation and capitalizing as above.
\1f
File: xemacs-faq.info, Node: Q1.3.5, Next: Q1.3.6, Prev: Q1.3.4, Up: Introduction
-Q1.3.5: Please explain the various input methods in MULE/XEmacs 20.0
---------------------------------------------------------------------
+Q1.3.5: Please explain the various input methods in MULE/XEmacs
+---------------------------------------------------------------
MORIOKA Tomohiko <morioka@jaist.ac.jp> writes:
\1f
File: xemacs-faq.info, Node: Q1.3.6, Next: Q1.3.7, Prev: Q1.3.5, Up: Introduction
-Q1.3.6: How do I portably code for MULE/XEmacs 20?
---------------------------------------------------
+Q1.3.6: How do I portably code for MULE/XEmacs?
+-----------------------------------------------
MORIOKA Tomohiko <morioka@jaist.ac.jp> writes:
(cond ((boundp 'MULE)
;; for original Mule
)
- ((string-match "XEmacs" emacs-version)
- ;; for XEmacs with Mule
- )
- (t
- ;; for next version of Emacs
- ))
+ ((string-match "XEmacs" emacs-version)
+ ;; for XEmacs with Mule
+ )
+ (t
+ ;; for next version of Emacs
+ ))
;; for old emacs variants
)
Or interactively, `M-x global-set-key' and follow the prompts.
\1f
-File: xemacs-faq.info, Node: Q1.4.6, Next: Q1.4.7, Prev: Q1.4.5, Up: Introduction
+File: xemacs-faq.info, Node: Q1.4.6, Prev: Q1.4.5, Up: Introduction
Q1.4.6: What's the difference between a macro and a function?
-------------------------------------------------------------
other keys. Refer to manual for details.
\1f
-File: xemacs-faq.info, Node: Q1.4.7, Prev: Q1.4.6, Up: Introduction
-
-Q1.4.7: How come options saved with 19.13 don't work with 19.14 or later?
--------------------------------------------------------------------------
-
- There's a problem with options of the form:
-
- (add-spec-list-to-specifier (face-property 'searchm-field 'font)
- '((global (nil))))
-
- saved by a 19.13 XEmacs that causes a 19.14 XEmacs grief. You must
-delete these options. XEmacs 19.14 and later no longer write the
-options directly to `.emacs' which should allow us to deal with version
-incompatibilities better in the future.
-
- Options saved under XEmacs 19.13 are protected by code that
-specifically requires a version 19 XEmacs. This won't be a problem
-unless you're using XEmacs v20. You should consider changing the code
-to read:
-
- (cond
- ((and (string-match "XEmacs" emacs-version)
- (boundp 'emacs-major-version)
- (or (and (= emacs-major-version 19)
- (>= emacs-minor-version 12))
- (>= emacs-major-version 20)))
- ...
- ))
+File: xemacs-faq.info, Node: Installation, Next: Customization, Prev: Introduction, Up: Top
+
+2 Installation and Trouble Shooting
+***********************************
+
+ This is part 2 of the XEmacs Frequently Asked Questions list. This
+section is devoted to Installation, Maintenance and Trouble Shooting.
+
+* Menu:
+
+Installation:
+* Q2.0.1:: Running XEmacs without installing.
+* Q2.0.2:: XEmacs is too big.
+* Q2.0.3:: Compiling XEmacs with Netaudio.
+* Q2.0.4:: Problems with Linux and ncurses.
+* Q2.0.5:: Do I need X11 to run XEmacs?
+* Q2.0.6:: I'm having strange crashes. What do I do?
+* Q2.0.7:: Libraries in non-standard locations.
+* Q2.0.8:: can't resolve symbol _h_errno
+* Q2.0.9:: Where do I find external libraries?
+* Q2.0.10:: After I run configure I find a coredump, is something wrong?
+* Q2.0.11:: XEmacs can't resolve host names.
+* Q2.0.12:: Why can't I strip XEmacs?
+* Q2.0.13:: I don't need no steenkin' packages. Do I? (NEW)
+* Q2.0.14:: I don't want to install a million .els one at a time! (NEW)
+
+Trouble Shooting:
+* Q2.1.1:: XEmacs just crashed on me!
+* Q2.1.2:: Cryptic Minibuffer messages.
+* Q2.1.3:: Translation Table Syntax messages at Startup.
+* Q2.1.4:: Startup warnings about deducing proper fonts?
+* Q2.1.5:: XEmacs cannot connect to my X Terminal.
+* Q2.1.6:: XEmacs just locked up my Linux X server.
+* Q2.1.7:: HP Alt key as Meta.
+* Q2.1.8:: got (wrong-type-argument color-instance-p nil)!
+* Q2.1.9:: XEmacs causes my OpenWindows 3.0 server to crash.
+* Q2.1.10:: Warnings from incorrect key modifiers.
+* Q2.1.11:: Can't instantiate image error... in toolbar
+* Q2.1.12:: Regular Expression Problems on DEC OSF1.
+* Q2.1.13:: HP/UX 10.10 and `create_process' failure
+* Q2.1.14:: C-g doesn't work for me. Is it broken?
+* Q2.1.15:: How to debug an XEmacs problem with a debugger.
+* Q2.1.16:: XEmacs crashes in `strcat' on HP/UX 10.
+* Q2.1.17:: `Marker does not point anywhere'.
+* Q2.1.18:: [This question intentionally left blank]
+* Q2.1.19:: XEmacs does not follow the local timezone.
+* Q2.1.20:: `Symbol's function definition is void: hkey-help-show.'
+* Q2.1.21:: [This question intentionally left blank]
+* Q2.1.22:: XEmacs seems to take a really long time to do some things.
+* Q2.1.23:: Movemail on Linux does not work for XEmacs 19.15 and later.
+* Q2.1.24:: XEmacs won't start without network. (NEW)
+* Q2.1.25:: After upgrading, XEmacs won't do `foo' any more! (NEW)
+
+\1f
+File: xemacs-faq.info, Node: Q2.0.1, Next: Q2.0.2, Prev: Installation, Up: Installation
+
+2.0: Installation
+=================
+
+Q2.0.1: Running XEmacs without installing
+-----------------------------------------
+
+ How can I just try XEmacs without installing it?
+
+ XEmacs will run in place without requiring installation and copying
+of the Lisp directories, and without having to specify a special
+build-time flag. It's the copying of the Lisp directories that
+requires so much space. XEmacs is largely written in Lisp.
+
+ A good method is to make a shell alias for xemacs:
+
+ alias xemacs=/i/xemacs-20.2/src/xemacs
+
+ (You will obviously use whatever directory you downloaded the source
+tree to instead of `/i/xemacs-20.2').
+
+ This will let you run XEmacs without massive copying.
+
+\1f
+File: xemacs-faq.info, Node: Q2.0.2, Next: Q2.0.3, Prev: Q2.0.1, Up: Installation
+
+Q2.0.2: XEmacs is too big
+-------------------------
+
+ The space required by the installation directories can be reduced
+dramatically if desired. Gzip all the .el files. Remove all the
+packages you'll never want to use. Remove the TexInfo manuals. Remove
+the Info (and use just hardcopy versions of the manual). Remove most
+of the stuff in etc. Remove or gzip all the source code. Gzip or
+remove the C source code. Configure it so that copies are not made of
+the support lisp.
+
+ These are all Emacs Lisp source code and bytecompiled object code.
+You may safely gzip everything named *.el here. You may remove any
+package you don't use. _Nothing bad will happen if you delete a package
+that you do not use_. You must be sure you do not use it though, so be
+conservative at first.
+
+ Possible candidates for deletion include w3, games, hyperbole, mh-e,
+hm-html-menus, vm, viper, oobr, gnus, etc. Ask yourself, _Do I ever
+want to use this package?_ If the answer is no, then it is a candidate
+for removal.
+
+ First, gzip all the .el files. Then go about package by package and
+start gzipping the .elc files. Then run XEmacs and do whatever it is
+you normally do. If nothing bad happens, then delete the directory. Be
+conservative about deleting directories, and it would be handy to have a
+backup around in case you get too zealous.
+
+ `prim', `modes', `packages', and `utils' are four directories you
+definitely do *not* want to delete, although certain packages can be
+removed from them if you do not use them.
+
+ Online texinfo sources in the `info' can either be compressed them
+or remove them. In either case, `C-h i' (info mode) will no longer
+work.
+
+\1f
+File: xemacs-faq.info, Node: Q2.0.3, Next: Q2.0.4, Prev: Q2.0.2, Up: Installation
+
+Q2.0.3: Compiling XEmacs with Netaudio.
+---------------------------------------
+
+ What is the best way to compile XEmacs with the netaudio system,
+since I have got the netaudio system compiled but installed at a weird
+place, I am not root. Also in the READMEs it does not say anything
+about compiling with the audioserver?
+
+ You should only need to add some stuff to the configure command line.
+To tell it to compile in netaudio support: `--with-sound=both', or
+`--with-sound=nas' if you don't want native sound support for some
+reason.) To tell it where to find the netaudio includes and libraries:
+
+ --site-libraries=WHATEVER
+ --site-includes=WHATEVER
+
+ Then (fingers crossed) it should compile and it will use netaudio if
+you have a server running corresponding to the X server. The netaudio
+server has to be there when XEmacs starts. If the netaudio server goes
+away and another is run, XEmacs should cope (fingers crossed, error
+handling in netaudio isn't perfect).
+
+ BTW, netaudio has been renamed as it has a name clash with something
+else, so if you see references to NAS or Network Audio System, it's the
+same thing. It also might be found at
+`ftp://ftp.x.org/contrib/audio/nas/'.
projects / chise / xemacs-chise.git- / blobdiff