have some or all of the packages on a local disk, such as a CDROM. If
you want to install from a local disk, you must first tell XEmacs where
to find the package binaries. This is done by adding a line like the
-following to your `.emacs' file:
+following to your init file:
(setq package-get-remote (cons (list nil "/my/path/to/package/binaries")
package-get-remote))
+ *Note Init File::.
+
Here, you'd change `/my/path/to/package/binaries' to be the path to
your local package binaries. Next, restart XEmacs, and you're ready to
go (advanced users can just re-evaluate the sexp).
\1f
-File: xemacs.info, Node: Building Packages, Prev: Using Packages, Up: Packages
+File: xemacs.info, Node: Building Packages, Next: Available Packages, Prev: Using Packages, Up: Packages
Source packages are available from the `packages/source-packages'
subdirectory of your favorite XEmacs distribution site. Alternatively,
of use by XEmacs maintainers producing files for distribution.
\1f
-File: xemacs.info, Node: Abbrevs, Next: Picture, Prev: Packages, Up: Top
+File: xemacs.info, Node: Available Packages, Prev: Building Packages, Up: Packages
+
+ This section is surely out-of-date. If you're sure that XEmacs is
+able to do something, but your installed XEmacs won't do it for you,
+it's probably in a package. If you can't find it in this section,
+that's a bug--please report it. It is very hard to keep this section
+up-to-date; your reports, comments, and questions will help a lot.
+
+ This data is up-to-date as of 10 February 1999. (Ouch! I told you!)
+
+Library Packages (libs)
+-----------------------
+
+ These packages are required to build and support most of the rest of
+XEmacs. By design, xemacs-base is a `regular' package. Use restraint
+when adding new files there as it is required by almost everything.
+
+`Sun'
+ Support for Sparcworks.
+
+`apel'
+ A Portable Emacs Library. Used by XEmacs MIME support.
+
+`edebug'
+ A Lisp debugger.
+
+`dired'
+ The DIRectory EDitor is for manipulating, and running commands on
+ files in a directory.
+
+`efs'
+ Treat files on remote systems the same as local files.
+
+`mail-lib'
+ Fundamental lisp files for providing email support.
+
+`tooltalk'
+ Support for building with Tooltalk.
+
+`xemacs-base'
+ Fundamental XEmacs support. Install this unless you wish a totally
+ naked XEmacs.
+
+`xemacs-devel'
+ XEmacs Lisp developer support. This package contains utilities for
+ supporting Lisp development. It is a single-file package so it
+ may be tailored.
+
+Communications Packages (comm)
+------------------------------
+
+ These packages provide support for various communications, primarily
+email and usenet.
+
+`footnote'
+ Footnoting in mail message editing modes.
+
+`gnats'
+ XEmacs bug reports.
+
+`gnus'
+ The Gnus Newsreader and Mailreader.
+
+`mailcrypt'
+ Support for messaging encryption with PGP.
+
+`mh-e'
+ Front end support for MH.
+
+`net-utils'
+ Miscellaneous Networking Utilities. This is a single-file package
+ and files may be deleted at will.
+
+`ph'
+ Emacs implementation of the ph client to CCSO/qi directory servers.
+
+`rmail'
+ An obsolete Emacs mailer. If you do not already use it don't
+ start.
+
+`supercite'
+ An Emacs citation tool. Useful with all Emacs Mailers and
+ Newsreaders.
+
+`tm'
+ Emacs MIME support.
+
+`vm'
+ An Emacs mailer.
+
+`w3'
+ A Web browser.
+
+Games and Amusements (games)
+----------------------------
+
+`cookie'
+ Spook and Yow (Zippy quotes).
+
+`games'
+ Tetris, Sokoban, and Snake.
+
+`mine'
+ Minehunt.
+
+`misc-games'
+ Other amusements and diversions.
+
+Mule Support (mule)
+-------------------
+
+`egg-its'
+ Wnn (4.2 and 6) support. SJ3 support. Must be installed prior to
+ XEmacs build.
+
+`leim'
+ Quail. Used for everything other than English and Japanese.
+
+`locale'
+ Used for localized menubars (French and Japanese) and localized
+ splash screens (Japanese).
+
+`mule-base'
+ Basic Mule support. Must be installed prior to building with Mule.
+
+`skk'
+ Another Japanese Language Input Method. Can be used without a
+ separate process running as a dictionary server.
+
+Productivity Packages (oa)
+--------------------------
+
+`calendar'
+ Calendar and diary support.
+
+`edit-utils'
+ Single file lisp packages for various XEmacs goodies. Load this
+ and weed out the junk you don't want.
+
+`forms'
+ Forms editing support (obsolete, use the builtin Widget instead).
+
+`frame-icon'
+ Provide a WM icon based on major mode.
+
+`hm--html-menus'
+ HTML editing.
+
+`ispell'
+ Spell-checking with ispell.
+
+`pc'
+ PC style interface emulation.
+
+`psgml'
+ Validated HTML/SGML editing.
+
+`sgml'
+ SGML/Linuxdoc-SGML editing.
+
+`slider'
+ User interface tool.
+
+`speedbar'
+ ??? Document me.
+
+`strokes'
+ Mouse enhancement utility.
+
+`text-modes'
+ Various single file lisp packages for editing text files.
+
+`time'
+ Display time & date on the modeline.
+
+Operating System Utilities (os)
+-------------------------------
+
+`eterm'
+ Terminal emulator.
+
+`igrep'
+ Enhanced front-end for Grep.
+
+`ilisp'
+ Front-end for Inferior Lisp.
+
+`os-utils'
+ Miscellaneous single-file O/S utilities, for printing, archiving,
+ compression, remote shells, etc.
+
+`view-process'
+ A Unix process browsing tool.
+
+Program Editing Support (prog)
+------------------------------
+
+`ada'
+ Ada language support.
+
+`c-support'
+ Basic single-file add-ons for editing C code.
+
+`cc-mode'
+ C, C++ and Java language support.
+
+`debug'
+ GUD, gdb, dbx debugging support.
+
+`ediff'
+ Interface over patch.
+
+`emerge'
+ Another interface over patch.
+
+`pcl-cvs'
+ CVS frontend.
+
+`prog-modes'
+ Miscellaneous single-file lisp files for various programming
+ languages.
+
+`scheme'
+ Front-end support for Inferior Scheme.
+
+`sh-script'
+ Support for editing shell scripts.
+
+`vc'
+ Version Control for Free systems.
+
+`vc-cc'
+ Version Control for ClearCase. This package must be installed
+ prior to building XEmacs [broken as of XEmacs 20.5-beta19].
+
+`vhdl'
+ Support for VHDL.
+
+Word Processing (wp)
+--------------------
+
+`auctex'
+ Basic TeX/LaTeX support.
+
+`crisp'
+ Crisp/Brief emulation.
+
+`edt'
+ DEC EDIT/EDT emulation.
+
+`texinfo'
+ XEmacs TeXinfo support.
+
+`textools'
+ Single-file TeX support.
+
+`tpu'
+ DEC EDIT/TPU support.
+
+`viper'
+ VI emulation support.
+
+\1f
+File: xemacs.info, Node: Abbrevs, Next: Picture, Prev: Running, Up: Top
Abbrevs
*******
and reads the specified file, defining abbrevs according to its
contents. `M-x quietly-read-abbrev-file' is the same but does not
display a message in the echo area; it is actually useful primarily in
-the `.emacs' file. If you give an empty argument to either of these
-functions, the file name Emacs uses is the value of the variable
-`abbrev-file-name', which is by default `"~/.abbrev_defs"'.
+the init file. *Note Init File::. If you give an empty argument to
+either of these functions, the file name Emacs uses is the value of the
+variable `abbrev-file-name', which is by default `"~/.abbrev_defs"'.
Emacs offers to save abbrevs automatically if you have changed any of
them, whenever it offers to save all files (for `C-x s' or `C-x C-c').
command is similar, but deletes existing aliases first.
If you want multiple addresses separated by a string other than `,'
-(a comma), then set the variable `mail-alias-seperator-string' to it.
+(a comma), then set the variable `mail-alias-separator-string' to it.
This has to be a comma bracketed by whitespace if you want any kind of
reasonable behavior.
an `FCC' field is entered for that file. Unless you remove the `FCC'
field, every message is written into that file when it is sent.
-\1f
-File: xemacs.info, Node: Mail Mode, Prev: Mail Headers, Up: Sending Mail
-
-Mail Mode
-=========
-
- The major mode used in the `*mail*' buffer is Mail mode. Mail mode
-is similar to Text mode, but several commands are provided on the `C-c'
-prefix. These commands all deal specifically with editing or sending
-the message.
-
-`C-c C-s'
- Send the message, and leave the `*mail*' buffer selected
- (`mail-send').
-
-`C-c C-c'
- Send the message, and select some other buffer
- (`mail-send-and-exit').
-
-`C-c C-f C-t'
- Move to the `To' header field, creating one if there is none
- (`mail-to').
-
-`C-c C-f C-s'
- Move to the `Subject' header field, creating one if there is none
- (`mail-subject').
-
-`C-c C-f C-c'
- Move to the `CC' header field, creating one if there is none
- (`mail-cc').
-
-`C-c C-w'
- Insert the file `~/.signature' at the end of the message text
- (`mail-signature').
-
-`C-c C-y'
- Yank the selected message (`mail-yank-original').
-
-`C-c C-q'
- Fill all paragraphs of yanked old messages, each individually
- (`mail-fill-yanked-message').
-
-`<button3>'
- Pops up a menu of useful mail-mode commands.
-
- There are two ways to send a message. `C-c C-c'
-(`mail-send-and-exit') is the usual way to send the message. It sends
-the message and then deletes the window (if there is another window) or
-switches to another buffer. It puts the `*mail*' buffer at the lowest
-priority for automatic reselection, since you are finished with using
-it. `C-c C-s' (`mail-send') sends the message and marks the `*mail*'
-buffer unmodified, but leaves that buffer selected so that you can
-modify the message (perhaps with new recipients) and send it again.
-
- Mail mode provides some other special commands that are useful for
-editing the headers and text of the message before you send it. There
-are three commands defined to move point to particular header fields,
-all based on the prefix `C-c C-f' (`C-f' is for "field"). They are
-`C-c C-f C-t' (`mail-to') to move to the `To' field, `C-c C-f C-s'
-(`mail-subject') for the `Subject' field, and `C-c C-f C-c' (`mail-cc')
-for the `CC' field. These fields have special motion commands because
-they are edited most frequently.
-
- `C-c C-w' (`mail-signature') adds a standard piece of text at the
-end of the message to say more about who you are. The text comes from
-the file `.signature' in your home directory.
-
- When you use an Rmail command to send mail from the Rmail mail
-reader, you can use `C-c C-y' `mail-yank-original' inside the `*mail*'
-buffer to insert the text of the message you are replying to. Normally
-Rmail indents each line of that message four spaces and eliminates most
-header fields. A numeric argument specifies the number of spaces to
-indent. An argument of just `C-u' says not to indent at all and not to
-eliminate anything. `C-c C-y' always uses the current message from the
-`RMAIL' buffer, so you can insert several old messages by selecting one
-in `RMAIL', switching to `*mail*' and yanking it, then switching back
-to `RMAIL' to select another.
-
- After using `C-c C-y', you can use the command `C-c C-q'
-(`mail-fill-yanked-message') to fill the paragraphs of the yanked old
-message or messages. One use of `C-c C-q' fills all such paragraphs,
-each one separately.
-
- Clicking the right mouse button in a mail buffer pops up a menu of
-the above commands, for easy access.
-
- Turning on Mail mode (which `C-x m' does automatically) calls the
-value of `text-mode-hook', if it is not void or `nil', and then calls
-the value of `mail-mode-hook' if that is not void or `nil'.
-
-\1f
-File: xemacs.info, Node: Reading Mail, Next: Calendar/Diary, Prev: Sending Mail, Up: Top
-
-Reading Mail
-************
-
- XEmacs provides three separate mail-reading packages. Each one
-comes with its own manual, which is included standard with the XEmacs
-distribution.
-
- The recommended mail-reading package for new users is VM. VM works
-with standard Unix-mail-format folders and was designed as a replacement
-for the older Rmail.
-
- XEmacs also provides a sophisticated and comfortable front-end to the
-MH mail-processing system, called `mh-e'. Unlike in other mail
-programs, folders in MH are stored as file-system directories, with
-each message occupying one (numbered) file. This facilitates working
-with mail using shell commands, and many other features of MH are also
-designed to integrate well with the shell and with shell scripts. Keep
-in mind, however, that in order to use mh-e you must have the MH
-mail-processing system installed on your computer.
-
- Finally, XEmacs provides the Rmail package. Rmail is (currently) the
-only mail reading package distributed with FSF GNU Emacs, and is
-powerful in its own right. However, it stores mail folders in a special
-format called `Babyl', that is incompatible with all other
-frequently-used mail programs. A utility program is provided for
-converting Babyl folders to standard Unix-mail format; however, unless
-you already have mail in Babyl-format folders, you should consider
-using VM or mh-e instead. (If at times you have to use FSF Emacs, it is
-not hard to obtain and install VM for that editor.)
-
-\1f
-File: xemacs.info, Node: Calendar/Diary, Next: Sorting, Prev: Reading Mail, Up: Top
-
-Calendar Mode and the Diary
-===========================
-
- Emacs provides the functions of a desk calendar, with a diary of
-planned or past events. To enter the calendar, type `M-x calendar';
-this displays a three-month calendar centered on the current month, with
-point on the current date. With a numeric argument, as in `C-u M-x
-calendar', it prompts you for the month and year to be the center of the
-three-month calendar. The calendar uses its own buffer, whose major
-mode is Calendar mode.
-
- `Button2' in the calendar brings up a menu of operations on a
-particular date; `Buttons3' brings up a menu of commonly used calendar
-features that are independent of any particular date. To exit the
-calendar, type `q'. *Note Customizing the Calendar and Diary:
-(elisp)Calendar, for customization information about the calendar and
-diary.
-
-* Menu:
-
-* Calendar Motion:: Moving through the calendar; selecting a date.
-* Scroll Calendar:: Bringing earlier or later months onto the screen.
-* Mark and Region:: Remembering dates, the mark ring.
-* General Calendar:: Exiting or recomputing the calendar.
-* LaTeX Calendar:: Print a calendar using LaTeX.
-* Holidays:: Displaying dates of holidays.
-* Sunrise/Sunset:: Displaying local times of sunrise and sunset.
-* Lunar Phases:: Displaying phases of the moon.
-* Other Calendars:: Converting dates to other calendar systems.
-* Diary:: Displaying events from your diary.
-* Calendar Customization:: Altering the behavior of the features above.
-
projects / chise / xemacs-chise.git / blobdiff