translation approved by the author instead of in the original English.
\1f
-File: xemacs.info, Node: Building Packages, Prev: Using Packages, Up: Packages
+File: xemacs.info, Node: Using Packages, Next: Building Packages, Prev: Package Terminology, Up: Packages
+
+Getting Started
+---------------
+
+ When you first download XEmacs 21, you will usually first grab the
+"core distribution", a file called `xemacs-21.0.tar.gz'. (Replace the
+21.0 by the current version number.) The core distribution contains
+the sources of XEmacs and a minimal set of Emacs Lisp files, which are
+in the subdirectory named `lisp'. This subdirectory used to contain
+all Emacs Lisp files distributed with XEmacs. Now, to conserve disk
+space, most non-essential packages were made optional.
+
+Choosing the Packages You Need
+------------------------------
+
+ The available packages can currently be found in the same ftp
+directory where you grabbed the core distribution from, and are located
+in the subdirectory `packages/binary-packages'. Package file names
+follow the naming convention `<package-name>-<version>-pkg.tar.gz'.
+
+ If you have EFS *Note (EFS)::, packages can be installed over the
+network. Alternatively, if you have copies of the packages locally,
+you can install packages from a local disk or CDROM.
+
+ The file `etc/PACKAGES' in the core distribution contains a list of
+the packages available at the time of the XEmacs release. Packages are
+also listed on the `Options' menu under:
+
+ Options->Customize->Emacs->Packages
+
+ However, don't select any of these menu picks unless you actually
+want to install the given package (and have properly configured your
+system to do so).
+
+ You can also get a list of available packages, and whether or not
+they are installed, using the visual package browser and installer.
+You can access it via the menus:
+
+ Options->Manage Packages->List & Install
+
+ Or, you can get to it via the keyboard:
+
+ M-x pui-list-packages
+
+ Hint to system administrators of multi-user systems: it might be a
+good idea to install all packages and not interfere with the wishes of
+your users.
+
+ If you can't find which package provides the feature you require, try
+using the `package-get-package-provider' function. Eg., if you know
+that you need `thingatpt', type:
+
+ M-x package-get-package-provider RET thingatpt
+
+ which will return something like (fsf-compat "1.06"). You can the use
+one of the methods above for installing the package you want.
+
+XEmacs and Installing Packages
+------------------------------
+
+ Normally, packages are installed over the network, using EFS *Note
+(EFS)::. However, you may not have network access, or you may already
+have some or all of the packages on a local disk, such as a CDROM. If
+you want to install from a local disk, you must first tell XEmacs where
+to find the package binaries. This is done by adding a line like the
+following to your init file:
+
+ (setq package-get-remote (cons (list nil "/my/path/to/package/binaries")
+ package-get-remote))
+
+ *Note Init File::.
+
+ Here, you'd change `/my/path/to/package/binaries' to be the path to
+your local package binaries. Next, restart XEmacs, and you're ready to
+go (advanced users can just re-evaluate the sexp).
+
+ If you are installing from a temporary, one-time directory, you can
+also add these directory names to `package-get-remote' using:
+
+ M-x pui-add-install-directory
+
+ Note, however, that any directories added using this function are not
+saved; this information will be lost when you quit XEmacs.
+
+ If you're going to install over the network, you only have to insure
+that EFS *Note (EFS):: works, and that it can get outside a firewall, if
+you happen to be behind one. You shouldn't have to do anything else;
+XEmacs already knows where to go. However you can add your own mirrors
+to this list. See `package-get-remote'.
+
+ The easiest way to install a package is to use the visual package
+browser and installer, using the menu pick:
+
+ Options->Manage Packages->List & Install
+ or
+ Options->Manage Packages->Using Custom->Select-> ...
+
+ You can also access it using the keyboard:
+
+ M-x pui-list-packages
+
+ The visual package browser will then display a list of all packages.
+Help information will be displayed at the very bottom of the buffer; you
+may have to scroll down to see it. You can also press `?' to get the
+same help. From this buffer, you can tell the package status by the
+character in the first column:
+
+`-'
+ The package has not been installed.
+
+`*'
+ The package has been installed, but a newer version is available.
+ The current version is out-of-date.
+
+`+'
+ The package has been marked for installation/update.
+
+ If there is no character in the first column, the package has been
+installed and is up-to-date.
+
+ From here, you can select or unselect packages for installation using
+the <RET> key, the `Mouse-2' button or selecting "Select" from the
+(Popup) Menu. Once you've finished selecting the packages, you can
+press the `x' key (or use the menu) to actually install the packages.
+Note that you will have to restart XEmacs for XEmacs to recognize any
+new packages.
+
+ Key summary:
+
+`?'
+ Display simple help.
+
+`<RET>'
+`<Mouse-2>'
+ Toggle between selecting and unselecting a package for
+ installation.
+
+`x'
+ Install selected packages.
+
+`<SPC>'
+ View, in the minibuffer, additional information about the package,
+ such as the package date (not the build date) and the package
+ author. Moving the mouse over a package name will also do the
+ same thing.
+
+`v'
+ Toggle between verbose and non-verbose package display.
+
+`g'
+ Refresh the package display.
+
+`q'
+ Kill the package buffer.
+
+ Moving the mouse over a package will also cause additional
+information about the package to be displayed in the minibuffer.
+
+Other package installation interfaces
+-------------------------------------
+
+ For an alternative package interface, you can select packages from
+the customize menus, under:
+
+ Options->Customize->Emacs->Packages-> ...
+ or
+ Options->Manage Packages->Using Custom->Select-> ...
+
+ Set their state to on, and then do:
+
+ Options->Manage Packages->Using Custom->Update Packages
+
+ This will automatically retrieve the packages you have selected from
+the XEmacs ftp site or your local disk, and install them into XEmacs.
+Additionally it will update any packages you already have installed to
+the newest version. Note that if a package is newly installed you will
+have to restart XEmacs for the change to take effect.
+
+ You can also install packages using a semi-manual interface:
+
+ M-x package-get-all <return>
+
+ Enter the name of the package (e.g., `prog-modes'), and XEmacs will
+search for the latest version (as listed in the lisp file
+`lisp/package-get-base.el'), and install it and any packages that it
+depends upon.
+
+Manual Binary Package Installation
+----------------------------------
+
+ Pre-compiled, binary packages can be installed in either a system
+package directory (this is determined when XEmacs is compiled), or in
+one of the following subdirectories of your `$HOME' directory:
+
+ ~/.xemacs/mule-packages
+ ~/.xemacs/xemacs-packages
+
+ Packages in the former directory will only be found by a Mule-enabled
+XEmacs.
+
+ XEmacs does not have to be running to install binary packages,
+although XEmacs will not know about any newly-installed packages until
+you restart XEmacs. Note, however, that installing a newer version of a
+package while XEmacs is running could cause strange errors in XEmacs;
+it's best to exit XEmacs before upgrading an existing package.
+
+ To install binary packages manually:
+
+ 1. Download the package(s) that you want to install. Each binary
+ package will typically be a gzip'd tarball.
+
+ 2. Decide where to install the packages: in the system package
+ directory, or in `~/.xemacs/mule-packages' or
+ `~/.xemacs/xemacs-packages', respectively. If you want to install
+ the packages in the system package directory, make sure you can
+ write into that directory. If you want to install in your `$HOME'
+ directory, create the directory, `~/.xemacs/mule-packages' or
+ `~/.xemacs/xemacs-packages', respectively.
+
+ 3. Next, `cd' to the directory under which you want to install the
+ package(s).
+
+ 4. From this directory, uncompress and extract each of the gzip'd
+ tarballs that you downloaded in step 1. Unix and Cygnus cygwin
+ users will typically do this using the commands:
+
+ gunzip < package.tar.gz | tar xvf -
+
+ Above, replace `package.tar.gz' with the filename of the package
+ that you downloaded in step 1.
+
+ Of course, if you use GNU `tar', you could also use:
+
+ tar xvzf package.tar.gz
+
+ 5. That's it. Quit and restart XEmacs to get it to recognize any new
+ or changed packages.
+
+
+\1f
+File: xemacs.info, Node: Building Packages, Next: Available Packages, Prev: Using Packages, Up: Packages
Source packages are available from the `packages/source-packages'
subdirectory of your favorite XEmacs distribution site. Alternatively,
of use by XEmacs maintainers producing files for distribution.
\1f
-File: xemacs.info, Node: Abbrevs, Next: Picture, Prev: Packages, Up: Top
+File: xemacs.info, Node: Available Packages, Prev: Building Packages, Up: Packages
+
+ This section is surely out-of-date. If you're sure that XEmacs is
+able to do something, but your installed XEmacs won't do it for you,
+it's probably in a package. If you can't find it in this section,
+that's a bug--please report it. It is very hard to keep this section
+up-to-date; your reports, comments, and questions will help a lot.
+
+ This data is up-to-date as of 10 February 1999. (Ouch! I told you!)
+
+Library Packages (libs)
+-----------------------
+
+ These packages are required to build and support most of the rest of
+XEmacs. By design, xemacs-base is a `regular' package. Use restraint
+when adding new files there as it is required by almost everything.
+
+`Sun'
+ Support for Sparcworks.
+
+`apel'
+ A Portable Emacs Library. Used by XEmacs MIME support.
+
+`edebug'
+ A Lisp debugger.
+
+`dired'
+ The DIRectory EDitor is for manipulating, and running commands on
+ files in a directory.
+
+`efs'
+ Treat files on remote systems the same as local files.
+
+`mail-lib'
+ Fundamental lisp files for providing email support.
+
+`tooltalk'
+ Support for building with Tooltalk.
+
+`xemacs-base'
+ Fundamental XEmacs support. Install this unless you wish a totally
+ naked XEmacs.
+
+`xemacs-devel'
+ XEmacs Lisp developer support. This package contains utilities for
+ supporting Lisp development. It is a single-file package so it
+ may be tailored.
+
+Communications Packages (comm)
+------------------------------
+
+ These packages provide support for various communications, primarily
+email and usenet.
+
+`footnote'
+ Footnoting in mail message editing modes.
+
+`gnats'
+ XEmacs bug reports.
+
+`gnus'
+ The Gnus Newsreader and Mailreader.
+
+`mailcrypt'
+ Support for messaging encryption with PGP.
+
+`mh-e'
+ Front end support for MH.
+
+`net-utils'
+ Miscellaneous Networking Utilities. This is a single-file package
+ and files may be deleted at will.
+
+`ph'
+ Emacs implementation of the ph client to CCSO/qi directory servers.
+
+`rmail'
+ An obsolete Emacs mailer. If you do not already use it don't
+ start.
+
+`supercite'
+ An Emacs citation tool. Useful with all Emacs Mailers and
+ Newsreaders.
+
+`tm'
+ Emacs MIME support.
+
+`vm'
+ An Emacs mailer.
+
+`w3'
+ A Web browser.
+
+Games and Amusements (games)
+----------------------------
+
+`cookie'
+ Spook and Yow (Zippy quotes).
+
+`games'
+ Tetris, Sokoban, and Snake.
+
+`mine'
+ Minehunt.
+
+`misc-games'
+ Other amusements and diversions.
+
+Mule Support (mule)
+-------------------
+
+`egg-its'
+ Wnn (4.2 and 6) support. SJ3 support. Must be installed prior to
+ XEmacs build.
+
+`leim'
+ Quail. Used for everything other than English and Japanese.
+
+`locale'
+ Used for localized menubars (French and Japanese) and localized
+ splash screens (Japanese).
+
+`mule-base'
+ Basic Mule support. Must be installed prior to building with Mule.
+
+`skk'
+ Another Japanese Language Input Method. Can be used without a
+ separate process running as a dictionary server.
+
+Productivity Packages (oa)
+--------------------------
+
+`calendar'
+ Calendar and diary support.
+
+`edit-utils'
+ Single file lisp packages for various XEmacs goodies. Load this
+ and weed out the junk you don't want.
+
+`forms'
+ Forms editing support (obsolete, use the builtin Widget instead).
+
+`frame-icon'
+ Provide a WM icon based on major mode.
+
+`hm--html-menus'
+ HTML editing.
+
+`ispell'
+ Spell-checking with ispell.
+
+`pc'
+ PC style interface emulation.
+
+`psgml'
+ Validated HTML/SGML editing.
+
+`sgml'
+ SGML/Linuxdoc-SGML editing.
+
+`slider'
+ User interface tool.
+
+`speedbar'
+ ??? Document me.
+
+`strokes'
+ Mouse enhancement utility.
+
+`text-modes'
+ Various single file lisp packages for editing text files.
+
+`time'
+ Display time & date on the modeline.
+
+Operating System Utilities (os)
+-------------------------------
+
+`eterm'
+ Terminal emulator.
+
+`igrep'
+ Enhanced front-end for Grep.
+
+`ilisp'
+ Front-end for Inferior Lisp.
+
+`os-utils'
+ Miscellaneous single-file O/S utilities, for printing, archiving,
+ compression, remote shells, etc.
+
+`view-process'
+ A Unix process browsing tool.
+
+Program Editing Support (prog)
+------------------------------
+
+`ada'
+ Ada language support.
+
+`c-support'
+ Basic single-file add-ons for editing C code.
+
+`cc-mode'
+ C, C++ and Java language support.
+
+`debug'
+ GUD, gdb, dbx debugging support.
+
+`ediff'
+ Interface over patch.
+
+`emerge'
+ Another interface over patch.
+
+`pcl-cvs'
+ CVS frontend.
+
+`prog-modes'
+ Miscellaneous single-file lisp files for various programming
+ languages.
+
+`scheme'
+ Front-end support for Inferior Scheme.
+
+`sh-script'
+ Support for editing shell scripts.
+
+`vc'
+ Version Control for Free systems.
+
+`vc-cc'
+ Version Control for ClearCase. This package must be installed
+ prior to building XEmacs [broken as of XEmacs 20.5-beta19].
+
+`vhdl'
+ Support for VHDL.
+
+Word Processing (wp)
+--------------------
+
+`auctex'
+ Basic TeX/LaTeX support.
+
+`crisp'
+ Crisp/Brief emulation.
+
+`edt'
+ DEC EDIT/EDT emulation.
+
+`texinfo'
+ XEmacs TeXinfo support.
+
+`textools'
+ Single-file TeX support.
+
+`tpu'
+ DEC EDIT/TPU support.
+
+`viper'
+ VI emulation support.
+
+\1f
+File: xemacs.info, Node: Abbrevs, Next: Picture, Prev: Running, Up: Top
Abbrevs
*******
and reads the specified file, defining abbrevs according to its
contents. `M-x quietly-read-abbrev-file' is the same but does not
display a message in the echo area; it is actually useful primarily in
-the `.emacs' file. If you give an empty argument to either of these
-functions, the file name Emacs uses is the value of the variable
-`abbrev-file-name', which is by default `"~/.abbrev_defs"'.
+the init file. *Note Init File::. If you give an empty argument to
+either of these functions, the file name Emacs uses is the value of the
+variable `abbrev-file-name', which is by default `"~/.abbrev_defs"'.
Emacs offers to save abbrevs automatically if you have changed any of
them, whenever it offers to save all files (for `C-x s' or `C-x C-c').
command is similar, but deletes existing aliases first.
If you want multiple addresses separated by a string other than `,'
-(a comma), then set the variable `mail-alias-seperator-string' to it.
+(a comma), then set the variable `mail-alias-separator-string' to it.
This has to be a comma bracketed by whitespace if you want any kind of
reasonable behavior.
an `FCC' field is entered for that file. Unless you remove the `FCC'
field, every message is written into that file when it is sent.
-\1f
-File: xemacs.info, Node: Mail Mode, Prev: Mail Headers, Up: Sending Mail
-
-Mail Mode
-=========
-
- The major mode used in the `*mail*' buffer is Mail mode. Mail mode
-is similar to Text mode, but several commands are provided on the `C-c'
-prefix. These commands all deal specifically with editing or sending
-the message.
-
-`C-c C-s'
- Send the message, and leave the `*mail*' buffer selected
- (`mail-send').
-
-`C-c C-c'
- Send the message, and select some other buffer
- (`mail-send-and-exit').
-
-`C-c C-f C-t'
- Move to the `To' header field, creating one if there is none
- (`mail-to').
-
-`C-c C-f C-s'
- Move to the `Subject' header field, creating one if there is none
- (`mail-subject').
-
-`C-c C-f C-c'
- Move to the `CC' header field, creating one if there is none
- (`mail-cc').
-
-`C-c C-w'
- Insert the file `~/.signature' at the end of the message text
- (`mail-signature').
-
-`C-c C-y'
- Yank the selected message (`mail-yank-original').
-
-`C-c C-q'
- Fill all paragraphs of yanked old messages, each individually
- (`mail-fill-yanked-message').
-
-`<button3>'
- Pops up a menu of useful mail-mode commands.
-
- There are two ways to send a message. `C-c C-c'
-(`mail-send-and-exit') is the usual way to send the message. It sends
-the message and then deletes the window (if there is another window) or
-switches to another buffer. It puts the `*mail*' buffer at the lowest
-priority for automatic reselection, since you are finished with using
-it. `C-c C-s' (`mail-send') sends the message and marks the `*mail*'
-buffer unmodified, but leaves that buffer selected so that you can
-modify the message (perhaps with new recipients) and send it again.
-
- Mail mode provides some other special commands that are useful for
-editing the headers and text of the message before you send it. There
-are three commands defined to move point to particular header fields,
-all based on the prefix `C-c C-f' (`C-f' is for "field"). They are
-`C-c C-f C-t' (`mail-to') to move to the `To' field, `C-c C-f C-s'
-(`mail-subject') for the `Subject' field, and `C-c C-f C-c' (`mail-cc')
-for the `CC' field. These fields have special motion commands because
-they are edited most frequently.
-
- `C-c C-w' (`mail-signature') adds a standard piece of text at the
-end of the message to say more about who you are. The text comes from
-the file `.signature' in your home directory.
-
- When you use an Rmail command to send mail from the Rmail mail
-reader, you can use `C-c C-y' `mail-yank-original' inside the `*mail*'
-buffer to insert the text of the message you are replying to. Normally
-Rmail indents each line of that message four spaces and eliminates most
-header fields. A numeric argument specifies the number of spaces to
-indent. An argument of just `C-u' says not to indent at all and not to
-eliminate anything. `C-c C-y' always uses the current message from the
-`RMAIL' buffer, so you can insert several old messages by selecting one
-in `RMAIL', switching to `*mail*' and yanking it, then switching back
-to `RMAIL' to select another.
-
- After using `C-c C-y', you can use the command `C-c C-q'
-(`mail-fill-yanked-message') to fill the paragraphs of the yanked old
-message or messages. One use of `C-c C-q' fills all such paragraphs,
-each one separately.
-
- Clicking the right mouse button in a mail buffer pops up a menu of
-the above commands, for easy access.
-
- Turning on Mail mode (which `C-x m' does automatically) calls the
-value of `text-mode-hook', if it is not void or `nil', and then calls
-the value of `mail-mode-hook' if that is not void or `nil'.
-
-\1f
-File: xemacs.info, Node: Reading Mail, Next: Calendar/Diary, Prev: Sending Mail, Up: Top
-
-Reading Mail
-************
-
- XEmacs provides three separate mail-reading packages. Each one
-comes with its own manual, which is included standard with the XEmacs
-distribution.
-
- The recommended mail-reading package for new users is VM. VM works
-with standard Unix-mail-format folders and was designed as a replacement
-for the older Rmail.
-
- XEmacs also provides a sophisticated and comfortable front-end to the
-MH mail-processing system, called `mh-e'. Unlike in other mail
-programs, folders in MH are stored as file-system directories, with
-each message occupying one (numbered) file. This facilitates working
-with mail using shell commands, and many other features of MH are also
-designed to integrate well with the shell and with shell scripts. Keep
-in mind, however, that in order to use mh-e you must have the MH
-mail-processing system installed on your computer.
-
- Finally, XEmacs provides the Rmail package. Rmail is (currently) the
-only mail reading package distributed with FSF GNU Emacs, and is
-powerful in its own right. However, it stores mail folders in a special
-format called `Babyl', that is incompatible with all other
-frequently-used mail programs. A utility program is provided for
-converting Babyl folders to standard Unix-mail format; however, unless
-you already have mail in Babyl-format folders, you should consider
-using VM or mh-e instead. (If at times you have to use FSF Emacs, it is
-not hard to obtain and install VM for that editor.)
-
-\1f
-File: xemacs.info, Node: Calendar/Diary, Next: Sorting, Prev: Reading Mail, Up: Top
-
-Calendar Mode and the Diary
-===========================
-
- Emacs provides the functions of a desk calendar, with a diary of
-planned or past events. To enter the calendar, type `M-x calendar';
-this displays a three-month calendar centered on the current month, with
-point on the current date. With a numeric argument, as in `C-u M-x
-calendar', it prompts you for the month and year to be the center of the
-three-month calendar. The calendar uses its own buffer, whose major
-mode is Calendar mode.
-
- `Button2' in the calendar brings up a menu of operations on a
-particular date; `Buttons3' brings up a menu of commonly used calendar
-features that are independent of any particular date. To exit the
-calendar, type `q'. *Note Customizing the Calendar and Diary:
-(elisp)Calendar, for customization information about the calendar and
-diary.
-
-* Menu:
-
-* Calendar Motion:: Moving through the calendar; selecting a date.
-* Scroll Calendar:: Bringing earlier or later months onto the screen.
-* Mark and Region:: Remembering dates, the mark ring.
-* General Calendar:: Exiting or recomputing the calendar.
-* LaTeX Calendar:: Print a calendar using LaTeX.
-* Holidays:: Displaying dates of holidays.
-* Sunrise/Sunset:: Displaying local times of sunrise and sunset.
-* Lunar Phases:: Displaying phases of the moon.
-* Other Calendars:: Converting dates to other calendar systems.
-* Diary:: Displaying events from your diary.
-* Calendar Customization:: Altering the behavior of the features above.
-
-\1f
-File: xemacs.info, Node: Calendar Motion, Next: Scroll Calendar, Prev: Calendar/Diary, Up: Calendar/Diary
-
-Movement in the Calendar
-------------------------
-
- Calendar mode lets you move through the calendar in logical units of
-time such as days, weeks, months, and years. If you move outside the
-three months originally displayed, the calendar display "scrolls"
-automatically through time to make the selected date visible. Moving to
-a date lets you view its holidays or diary entries, or convert it to
-other calendars; moving longer time periods is also useful simply to
-scroll the calendar.
-
-* Menu:
-
-* Calendar Unit Motion:: Moving by days, weeks, months, and years.
-* Move to Beginning or End:: Moving to start/end of weeks, months, and years.
-* Specified Dates:: Moving to the current date or another
- specific date.
-
-\1f
-File: xemacs.info, Node: Calendar Unit Motion, Next: Move to Beginning or End, Prev: Calendar Motion, Up: Calendar Motion
-
-Motion by Integral Days, Weeks, Months, Years
-.............................................
-
- The commands for movement in the calendar buffer parallel the
-commands for movement in text. You can move forward and backward by
-days, weeks, months, and years.
-
-`C-f'
- Move point one day forward (`calendar-forward-day').
-
-`C-b'
- Move point one day backward (`calendar-backward-day').
-
-`C-n'
- Move point one week forward (`calendar-forward-week').
-
-`C-p'
- Move point one week backward (`calendar-backward-week').
-
-`M-}'
- Move point one month forward (`calendar-forward-month').
-
-`M-{'
- Move point one month backward (`calendar-backward-month').
-
-`C-x ]'
- Move point one year forward (`calendar-forward-year').
-
-`C-x ['
- Move point one year backward (`calendar-backward-year').
-
- The day and week commands are natural analogues of the usual Emacs
-commands for moving by characters and by lines. Just as `C-n' usually
-moves to the same column in the following line, in Calendar mode it
-moves to the same day in the following week. And `C-p' moves to the
-same day in the previous week.
-
- The arrow keys are equivalent to `C-f', `C-b', `C-n' and `C-p', just
-as they normally are in other modes.
-
- The commands for motion by months and years work like those for
-weeks, but move a larger distance. The month commands `M-}' and `M-{'
-move forward or backward by an entire month's time. The year commands
-`C-x ]' and `C-x [' move forward or backward a whole year.
-
- The easiest way to remember these commands is to consider months and
-years analogous to paragraphs and pages of text, respectively. But the
-commands themselves are not quite analogous. The ordinary Emacs
-paragraph commands move to the beginning or end of a paragraph, whereas
-these month and year commands move by an entire month or an entire
-year, which usually involves skipping across the end of a month or year.
-
- All these commands accept a numeric argument as a repeat count. For
-convenience, the digit keys and the minus sign specify numeric
-arguments in Calendar mode even without the Meta modifier. For example,
-`100 C-f' moves point 100 days forward from its present location.
-
-\1f
-File: xemacs.info, Node: Move to Beginning or End, Next: Specified Dates, Prev: Calendar Unit Motion, Up: Calendar Motion
-
-Beginning or End of Week, Month or Year
-.......................................
-
- A week (or month, or year) is not just a quantity of days; we think
-of weeks (months, years) as starting on particular dates. So Calendar
-mode provides commands to move to the beginning or end of a week, month
-or year:
-
-`C-a'
- Move point to start of week (`calendar-beginning-of-week').
-
-`C-e'
- Move point to end of week (`calendar-end-of-week').
-
-`M-a'
- Move point to start of month (`calendar-beginning-of-month').
-
-`M-e'
- Move point to end of month (`calendar-end-of-month').
-
-`M-<'
- Move point to start of year (`calendar-beginning-of-year').
-
-`M->'
- Move point to end of year (`calendar-end-of-year').
-
- These commands also take numeric arguments as repeat counts, with the
-repeat count indicating how many weeks, months, or years to move
-backward or forward.
-
- By default, weeks begin on Sunday. To make them begin on Monday
-instead, set the variable `calendar-week-start-day' to 1.
-
-\1f
-File: xemacs.info, Node: Specified Dates, Prev: Move to Beginning or End, Up: Calendar Motion
-
-Particular Dates
-................
-
- Calendar mode provides commands for moving to a particular date
-specified in various ways.
-
-`g d'
- Move point to specified date (`calendar-goto-date').
-
-`o'
- Center calendar around specified month (`calendar-other-month').
-
-`.'
- Move point to today's date (`calendar-goto-today').
-
- `g d' (`calendar-goto-date') prompts for a year, a month, and a day
-of the month, and then moves to that date. Because the calendar
-includes all dates from the beginning of the current era, you must type
-the year in its entirety; that is, type `1990', not `90'.
-
- `o' (`calendar-other-month') prompts for a month and year, then
-centers the three-month calendar around that month.
-
- You can return to today's date with `.' (`calendar-goto-today').
-
-\1f
-File: xemacs.info, Node: Scroll Calendar, Next: Mark and Region, Prev: Calendar Motion, Up: Calendar/Diary
-
-Scrolling the Calendar through Time
------------------------------------
-
- The calendar display scrolls automatically through time when you
-move out of the visible portion. You can also scroll it manually.
-Imagine that the calendar window contains a long strip of paper with
-the months on it. Scrolling it means moving the strip so that new
-months become visible in the window.
-
-`C-x <'
- Scroll calendar one month forward (`scroll-calendar-left').
-
-`C-x >'
- Scroll calendar one month backward (`scroll-calendar-right').
-
-`C-v'
-`<NEXT>'
- Scroll calendar three months forward
- (`scroll-calendar-left-three-months').
-
-`M-v'
-`<PRIOR>'
- Scroll calendar three months backward
- (`scroll-calendar-right-three-months').
-
- The most basic calendar scroll commands scroll by one month at a
-time. This means that there are two months of overlap between the
-display before the command and the display after. `C-x <' scrolls the
-calendar contents one month to the left; that is, it moves the display
-forward in time. `C-x >' scrolls the contents to the right, which
-moves backwards in time.
-
- The commands `C-v' and `M-v' scroll the calendar by an entire
-"screenful"--three months--in analogy with the usual meaning of these
-commands. `C-v' makes later dates visible and `M-v' makes earlier
-dates visible. These commands take a numeric argument as a repeat
-count; in particular, since `C-u' multiplies the next command by four,
-typing `C-u C-v' scrolls the calendar forward by a year and typing `C-u
-M-v' scrolls the calendar backward by a year.
-
- The function keys <NEXT> and <PRIOR> are equivalent to `C-v' and
-`M-v', just as they are in other modes.
-
-\1f
-File: xemacs.info, Node: Mark and Region, Next: General Calendar, Prev: Scroll Calendar, Up: Calendar/Diary
-
-The Mark and the Region
------------------------
-
- The concept of the mark applies to the calendar just as to any other
-buffer, but it marks a _date_, not a _position_ in the buffer. The
-region consists of the days between the mark and point (including the
-starting and stopping dates).
-
-`C-SPC'
- Set the mark to today's date (`calendar-set-mark').
-
-`C-@'
- The same.
-
-`C-x C-x'
- Interchange mark and point (`calendar-exchange-point-and-mark').
-
-`M-='
- Display the number of days in the current region
- (`calendar-count-days-region').
-
- You set the mark in the calendar, as in any other buffer, by using
-`C-@' or `C-SPC' (`calendar-set-mark'). You return to the marked date
-with the command `C-x C-x' (`calendar-exchange-point-and-mark') which
-puts the mark where point was and point where mark was. The calendar
-is scrolled as necessary, if the marked date was not visible on the
-screen. This does not change the extent of the region.
-
- To determine the number of days in the region, type `M-='
-(`calendar-count-days-region'). The numbers of days printed is
-_inclusive_; that is, it includes the days specified by mark and point.
-
- The main use of the mark in the calendar is to remember dates that
-you may want to go back to. To make this feature more useful, the mark
-ring (*note Mark Ring::) operates exactly as in other buffers: Emacs
-remembers 16 previous locations of the mark. To return to a marked
-date, type `C-u C-SPC' (or `C-u C-@'); this is the command
-`calendar-set-mark' given a numeric argument. It moves point to where
-the mark was, restores the mark from the ring of former marks, and
-stores the previous point at the end of the mark ring. So, repeated
-use of this command moves point through all the old marks on the ring,
-one by one.
-
projects / chise / xemacs-chise.git / blobdiff