-This is Info file ../../info/xemacs.info, produced by Makeinfo version
-1.68 from the input file xemacs.texi.
+This is ../info/xemacs.info, produced by makeinfo version 4.0b from
+xemacs/xemacs.texi.
INFO-DIR-SECTION XEmacs Editor
START-INFO-DIR-ENTRY
translation approved by the author instead of in the original English.
\1f
-File: xemacs.info, Node: Fancy Diary Display, Next: Included Diary Files, Prev: Hebrew/Islamic Entries, Up: Calendar Customization
+File: xemacs.info, Node: Sunrise/Sunset, Next: Lunar Phases, Prev: Holidays, Up: Calendar/Diary
+
+Times of Sunrise and Sunset
+---------------------------
+
+ Special calendar commands can tell you, to within a minute or two,
+the times of sunrise and sunset for any date.
+
+`S'
+ Display times of sunrise and sunset for the selected date
+ (`calendar-sunrise-sunset').
+
+`Button2 Sunrise/Sunset'
+ Display times of sunrise and sunset for the date you click on.
+
+`M-x sunrise-sunset'
+ Display times of sunrise and sunset for today's date.
+
+`C-u M-x sunrise-sunset'
+ Display times of sunrise and sunset for a specified date.
+
+ Within the calendar, to display the _local times_ of sunrise and
+sunset in the echo area, move point to the date you want, and type `S'.
+Alternatively, click `Button2' on the date, then choose
+`Sunrise/Sunset' from the menu that appears. The command `M-x
+sunrise-sunset' is available outside the calendar to display this
+information for today's date or a specified date. To specify a date
+other than today, use `C-u M-x sunrise-sunset', which prompts for the
+year, month, and day.
+
+ You can display the times of sunrise and sunset for any location and
+any date with `C-u C-u M-x sunrise-sunset'. This asks you for a
+longitude, latitude, number of minutes difference from Coordinated
+Universal Time, and date, and then tells you the times of sunrise and
+sunset for that location on that date.
+
+ Because the times of sunrise and sunset depend on the location on
+earth, you need to tell Emacs your latitude, longitude, and location
+name before using these commands. Here is an example of what to set:
+
+ (setq calendar-latitude 40.1)
+ (setq calendar-longitude -88.2)
+ (setq calendar-location-name "Urbana, IL")
+
+Use one decimal place in the values of `calendar-latitude' and
+`calendar-longitude'.
+
+ Your time zone also affects the local time of sunrise and sunset.
+Emacs usually gets time zone information from the operating system, but
+if these values are not what you want (or if the operating system does
+not supply them), you must set them yourself. Here is an example:
+
+ (setq calendar-time-zone -360)
+ (setq calendar-standard-time-zone-name "CST")
+ (setq calendar-daylight-time-zone-name "CDT")
+
+The value of `calendar-time-zone' is the number of minutes difference
+between your local standard time and Coordinated Universal Time
+(Greenwich time). The values of `calendar-standard-time-zone-name' and
+`calendar-daylight-time-zone-name' are the abbreviations used in your
+time zone. Emacs displays the times of sunrise and sunset _corrected
+for daylight savings time_. *Note Daylight Savings::, for how daylight
+savings time is determined.
+
+ As a user, you might find it convenient to set the calendar location
+variables for your usual physical location in your init file. And when
+you install Emacs on a machine, you can create a `default.el' file
+which sets them properly for the typical location of most users of that
+machine. *Note Init File::.
-Fancy Diary Display
-...................
-
- Diary display works by preparing the diary buffer and then running
-the hook `diary-display-hook'. The default value of this hook
-(`simple-diary-display') hides the irrelevant diary entries and then
-displays the buffer. However, if you specify the hook as follows,
+\1f
+File: xemacs.info, Node: Lunar Phases, Next: Other Calendars, Prev: Sunrise/Sunset, Up: Calendar/Diary
- (add-hook 'diary-display-hook 'fancy-diary-display)
+Phases of the Moon
+------------------
-this enables fancy diary display. It displays diary entries and
-holidays by copying them into a special buffer that exists only for the
-sake of display. Copying to a separate buffer provides an opportunity
-to change the displayed text to make it prettier--for example, to sort
-the entries by the dates they apply to.
+ These calendar commands display the dates and times of the phases of
+the moon (new moon, first quarter, full moon, last quarter). This
+feature is useful for debugging problems that "depend on the phase of
+the moon."
- As with simple diary display, you can print a hard copy of the buffer
-with `print-diary-entries'. To print a hard copy of a day-by-day diary
-for a week by positioning point on Sunday of that week, type `7 d' and
-then do `M-x print-diary-entries'. As usual, the inclusion of the
-holidays slows down the display slightly; you can speed things up by
-setting the variable `holidays-in-diary-buffer' to `nil'.
+`M'
+ Display the dates and times for all the quarters of the moon for
+ the three-month period shown (`calendar-phases-of-moon').
- Ordinarily, the fancy diary buffer does not show days for which
-there are no diary entries, even if that day is a holiday. If you want
-such days to be shown in the fancy diary buffer, set the variable
-`diary-list-include-blanks' to `t'.
+`M-x phases-of-moon'
+ Display dates and times of the quarters of the moon for three
+ months around today's date.
- If you use the fancy diary display, you can use the normal hook
-`list-diary-entries-hook' to sort each day's diary entries by their
-time of day. Add this line to your `.emacs' file:
+ Within the calendar, use the `M' command to display a separate
+buffer of the phases of the moon for the current three-month range. The
+dates and times listed are accurate to within a few minutes.
- (add-hook 'list-diary-entries-hook 'sort-diary-entries t)
+ Outside the calendar, use the command `M-x phases-of-moon' to
+display the list of the phases of the moon for the current month and the
+preceding and succeeding months. For information about a different
+month, use `C-u M-x phases-of-moon', which prompts for the month and
+year.
-For each day, this sorts diary entries that begin with a recognizable
-time of day according to their times. Diary entries without times come
-first within each day.
+ The dates and times given for the phases of the moon are given in
+local time (corrected for daylight savings, when appropriate); but if
+the variable `calendar-time-zone' is void, Coordinated Universal Time
+(the Greenwich time zone) is used. *Note Daylight Savings::.
\1f
-File: xemacs.info, Node: Included Diary Files, Next: Sexp Diary Entries, Prev: Fancy Diary Display, Up: Calendar Customization
+File: xemacs.info, Node: Other Calendars, Next: Calendar Systems, Prev: Lunar Phases, Up: Calendar/Diary
-Included Diary Files
-....................
+Conversion To and From Other Calendars
+--------------------------------------
- Fancy diary display also has the ability to process included diary
-files. This permits a group of people to share a diary file for events
-that apply to all of them. Lines in the diary file of this form:
+ The Emacs calendar displayed is _always_ the Gregorian calendar,
+sometimes called the "new style" calendar, which is used in most of the
+world today. However, this calendar did not exist before the sixteenth
+century and was not widely used before the eighteenth century; it did
+not fully displace the Julian calendar and gain universal acceptance
+until the early twentieth century. The Emacs calendar can display any
+month since January, year 1 of the current era, but the calendar
+displayed is the Gregorian, even for a date at which the Gregorian
+calendar did not exist.
- #include "FILENAME"
+ While Emacs cannot display other calendars, it can convert dates to
+and from several other calendars.
-includes the diary entries from the file FILENAME in the fancy diary
-buffer. The include mechanism is recursive, so that included files can
-include other files, and so on; you must be careful not to have a cycle
-of inclusions, of course. Here is how to enable the include facility:
+* Menu:
- (add-hook 'list-diary-entries-hook 'include-other-diary-files)
- (add-hook 'mark-diary-entries-hook 'mark-included-diary-files)
+* Calendar Systems:: The calendars Emacs understands
+ (aside from Gregorian).
+* To Other Calendar:: Converting the selected date to various calendars.
+* From Other Calendar:: Moving to a date specified in another calendar.
+* Mayan Calendar:: Moving to a date specified in a Mayan calendar.
- The include mechanism works only with the fancy diary display,
-because ordinary diary display shows the entries directly from your
-diary file.
+ If you are interested in these calendars, you can convert dates one
+at a time. Put point on the desired date of the Gregorian calendar and
+press the appropriate keys. The `p' is a mnemonic for "print" since
+Emacs "prints' the equivalent date in the echo area.
\1f
-File: xemacs.info, Node: Sexp Diary Entries, Next: Appt Customizing, Prev: Included Diary Files, Up: Calendar Customization
-
-Sexp Entries and the Fancy Diary Display
-........................................
-
- Sexp diary entries allow you to do more than just have complicated
-conditions under which a diary entry applies. If you use the fancy
-diary display, sexp entries can generate the text of the entry depending
-on the date itself. For example, an anniversary diary entry can insert
-the number of years since the anniversary date into the text of the
-diary entry. Thus the `%d' in this dairy entry:
-
- %%(diary-anniversary 10 31 1948) Arthur's birthday (%d years old)
-
-gets replaced by the age, so on October 31, 1990 the entry appears in
-the fancy diary buffer like this:
-
- Arthur's birthday (42 years old)
-
-If the diary file instead contains this entry:
-
- %%(diary-anniversary 10 31 1948) Arthur's %d%s birthday
-
-the entry in the fancy diary buffer for October 31, 1990 appears like
-this:
-
- Arthur's 42nd birthday
-
- Similarly, cyclic diary entries can interpolate the number of
-repetitions that have occurred:
-
- %%(diary-cyclic 50 1 1 1990) Renew medication (%d%s time)
-
-looks like this:
-
- Renew medication (5th time)
-
-in the fancy diary display on September 8, 1990.
-
- The generality of sexp diary entries lets you specify any diary entry
-that you can describe algorithmically. A sexp diary entry contains an
-expression that computes whether the entry applies to any given date.
-If its value is non-`nil', the entry applies to that date; otherwise,
-it does not. The expression can use the variable `date' to find the
-date being considered; its value is a list (MONTH DAY YEAR) that refers
-to the Gregorian calendar.
-
- Suppose you get paid on the 21st of the month if it is a weekday, and
-on the Friday before if the 21st is on a weekend. Here is how to write
-a sexp diary entry that matches those dates:
-
- &%%(let ((dayname (calendar-day-of-week date))
- (day (car (cdr date))))
- (or (and (= day 21) (memq dayname '(1 2 3 4 5)))
- (and (memq day '(19 20)) (= dayname 5)))
- ) Pay check deposited
-
-applies to just those dates. This example illustrates how the sexp can
-depend on the variable `date'; this variable is a list (MONTH DAY YEAR)
-that gives the Gregorian date for which the diary entries are being
-found. If the value of the expression is `t', the entry applies to
-that date. If the expression evaluates to `nil', the entry does *not*
-apply to that date.
-
- The following sexp diary entries take advantage of the ability (in
-the fancy diary display) to concoct diary entries whose text varies
-based on the date:
-
-`%%(diary-sunrise-sunset)'
- Make a diary entry for the local times of today's sunrise and
- sunset.
+File: xemacs.info, Node: Calendar Systems, Next: To Other Calendar, Prev: Other Calendars, Up: Other Calendars
+
+Supported Calendar Systems
+==========================
+
+ The ISO commercial calendar is used largely in Europe.
+
+ The Julian calendar, named after Julius Caesar, was the one used in
+Europe throughout medieval times, and in many countries up until the
+nineteenth century.
+
+ Astronomers use a simple counting of days elapsed since noon, Monday,
+January 1, 4713 B.C. on the Julian calendar. The number of days elapsed
+is called the _Julian day number_ or the _Astronomical day number_.
+
+ The Hebrew calendar is used by tradition in the Jewish religion. The
+Emacs calendar program uses the Hebrew calendar to determine the dates
+of Jewish holidays. Hebrew calendar dates begin and end at sunset.
+
+ The Islamic calendar is used in many predominantly Islamic countries.
+Emacs uses it to determine the dates of Islamic holidays. There is no
+universal agreement in the Islamic world about the calendar; Emacs uses
+a widely accepted version, but the precise dates of Islamic holidays
+often depend on proclamation by religious authorities, not on
+calculations. As a consequence, the actual dates of observance can vary
+slightly from the dates computed by Emacs. Islamic calendar dates begin
+and end at sunset.
+
+ The French Revolutionary calendar was created by the Jacobins after
+the 1789 revolution, to represent a more secular and nature-based view
+of the annual cycle, and to install a 10-day week in a rationalization
+measure similar to the metric system. The French government officially
+abandoned this calendar at the end of 1805.
+
+ The Maya of Central America used three separate, overlapping calendar
+systems, the _long count_, the _tzolkin_, and the _haab_. Emacs knows
+about all three of these calendars. Experts dispute the exact
+correlation between the Mayan calendar and our calendar; Emacs uses the
+Goodman-Martinez-Thompson correlation in its calculations.
+
+ The Copts use a calendar based on the ancient Egyptian solar
+calendar. Their calendar consists of twelve 30-day months followed by
+an extra five-day period. Once every fourth year they add a leap day
+to this extra period to make it six days. The Ethiopic calendar is
+identical in structure, but has different year numbers and month names.
+
+ The Persians use a solar calendar based on a design of Omar Khayyam.
+Their calendar consists of twelve months of which the first six have 31
+days, the next five have 30 days, and the last has 29 in ordinary years
+and 30 in leap years. Leap years occur in a complicated pattern every
+four or five years.
+
+ The Chinese calendar is a complicated system of lunar months arranged
+into solar years. The years go in cycles of sixty, each year containing
+either twelve months in an ordinary year or thirteen months in a leap
+year; each month has either 29 or 30 days. Years, ordinary months, and
+days are named by combining one of ten "celestial stems" with one of
+twelve "terrestrial branches" for a total of sixty names that are
+repeated in a cycle of sixty.
-`%%(diary-phases-of-moon)'
- Make a diary entry for the phases (quarters) of the moon.
-
-`%%(diary-day-of-year)'
- Make a diary entry with today's day number in the current year and
- the number of days remaining in the current year.
+\1f
+File: xemacs.info, Node: To Other Calendar, Next: From Other Calendar, Prev: Calendar Systems, Up: Other Calendars
-`%%(diary-iso-date)'
- Make a diary entry with today's equivalent ISO commercial date.
+Converting To Other Calendars
+=============================
-`%%(diary-julian-date)'
- Make a diary entry with today's equivalent date on the Julian
- calendar.
+ The following commands describe the selected date (the date at point)
+in various other calendar systems:
-`%%(diary-astro-day-number)'
- Make a diary entry with today's equivalent astronomical (Julian)
- day number.
+`Button2 Other Calendars'
+ Display the date that you click on, expressed in various other
+ calendars.
-`%%(diary-hebrew-date)'
- Make a diary entry with today's equivalent date on the Hebrew
- calendar.
+`p c'
+ Display ISO commercial calendar equivalent for selected day
+ (`calendar-print-iso-date').
-`%%(diary-islamic-date)'
- Make a diary entry with today's equivalent date on the Islamic
- calendar.
+`p j'
+ Display Julian date for selected day
+ (`calendar-print-julian-date').
-`%%(diary-french-date)'
- Make a diary entry with today's equivalent date on the French
- Revolutionary calendar.
+`p a'
+ Display astronomical (Julian) day number for selected day
+ (`calendar-print-astro-day-number').
-`%%(diary-mayan-date)'
- Make a diary entry with today's equivalent date on the Mayan
- calendar.
+`p h'
+ Display Hebrew date for selected day
+ (`calendar-print-hebrew-date').
-Thus including the diary entry
+`p i'
+ Display Islamic date for selected day
+ (`calendar-print-islamic-date').
- &%%(diary-hebrew-date)
+`p f'
+ Display French Revolutionary date for selected day
+ (`calendar-print-french-date').
-causes every day's diary display to contain the equivalent date on the
-Hebrew calendar, if you are using the fancy diary display. (With simple
-diary display, the line `&%%(diary-hebrew-date)' appears in the diary
-for any date, but does nothing particularly useful.)
+`p C'
+ Display Chinese date for selected day
+ (`calendar-print-chinese-date').
- These functions can be used to construct sexp diary entries based on
-the Hebrew calendar in certain standard ways:
+`p k'
+ Display Coptic date for selected day
+ (`calendar-print-coptic-date').
-`%%(diary-rosh-hodesh)'
- Make a diary entry that tells the occurrence and ritual
- announcement of each new Hebrew month.
+`p e'
+ Display Ethiopic date for selected day
+ (`calendar-print-ethiopic-date').
-`%%(diary-parasha)'
- Make a Saturday diary entry that tells the weekly synagogue
- scripture reading.
+`p p'
+ Display Persian date for selected day
+ (`calendar-print-persian-date').
-`%%(diary-sabbath-candles)'
- Make a Friday diary entry that tells the *local time* of Sabbath
- candle lighting.
+`p m'
+ Display Mayan date for selected day (`calendar-print-mayan-date').
-`%%(diary-omer)'
- Make a diary entry that gives the omer count, when appropriate.
+ If you are using X, the easiest way to translate a date into other
+calendars is to click on it with `Button2', then choose `Other
+Calendars' from the menu that appears. This displays the equivalent
+forms of the date in all the calendars Emacs understands, in the form of
+a menu. (Choosing an alternative from this menu doesn't actually do
+anything--the menu is used only for display.)
-`%%(diary-yahrzeit MONTH DAY YEAR) NAME'
- Make a diary entry marking the anniversary of a date of death.
- The date is the *Gregorian* (civil) date of death. The diary
- entry appears on the proper Hebrew calendar anniversary and on the
- day before. (In the European style, the order of the parameters
- is changed to DAY, MONTH, YEAR.)
+ Put point on the desired date of the Gregorian calendar, then type
+the appropriate keys. The `p' is a mnemonic for "print" since Emacs
+"prints" the equivalent date in the echo area.
\1f
-File: xemacs.info, Node: Appt Customizing, Prev: Sexp Diary Entries, Up: Calendar Customization
-
-Customizing Appointment Reminders
-.................................
-
- You can specify exactly how Emacs reminds you of an appointment, and
-how far in advance it begins doing so, by setting these variables:
-
-`appt-message-warning-time'
- The time in minutes before an appointment that the reminder
- begins. The default is 10 minutes.
-
-`appt-audible'
- If this is `t' (the default), Emacs rings the terminal bell for
- appointment reminders.
-
-`appt-visible'
- If this is `t' (the default), Emacs displays the appointment
- message in echo area.
-
-`appt-display-mode-line'
- If this is `t' (the default), Emacs displays the number of minutes
- to the appointment on the mode line.
-
-`appt-msg-window'
- If this is `t' (the default), Emacs displays the appointment
- message in another window.
-
-`appt-display-duration'
- The number of seconds an appointment message is displayed. The
- default is 5 seconds.
+File: xemacs.info, Node: From Other Calendar, Next: Mayan Calendar, Prev: To Other Calendar, Up: Other Calendars
+
+Converting From Other Calendars
+===============================
+
+ You can use the other supported calendars to specify a date to move
+to. This section describes the commands for doing this using calendars
+other than Mayan; for the Mayan calendar, see the following section.
+
+`g c'
+ Move to a date specified in the ISO commercial calendar
+ (`calendar-goto-iso-date').
+
+`g j'
+ Move to a date specified in the Julian calendar
+ (`calendar-goto-julian-date').
+
+`g a'
+ Move to a date specified in astronomical (Julian) day number
+ (`calendar-goto-astro-day-number').
+
+`g h'
+ Move to a date specified in the Hebrew calendar
+ (`calendar-goto-hebrew-date').
+
+`g i'
+ Move to a date specified in the Islamic calendar
+ (`calendar-goto-islamic-date').
+
+`g f'
+ Move to a date specified in the French Revolutionary calendar
+ (`calendar-goto-french-date').
+
+`g C'
+ Move to a date specified in the Chinese calendar
+ (`calendar-goto-chinese-date').
+
+`g p'
+ Move to a date specified in the Persian calendar
+ (`calendar-goto-persian-date').
+
+`g k'
+ Move to a date specified in the Coptic calendar
+ (`calendar-goto-coptic-date').
+
+`g e'
+ Move to a date specified in the Ethiopic calendar
+ (`calendar-goto-ethiopic-date').
+
+ These commands ask you for a date on the other calendar, move point
+to the Gregorian calendar date equivalent to that date, and display the
+other calendar's date in the echo area. Emacs uses strict completion
+(*note Completion::) whenever it asks you to type a month name, so you
+don't have to worry about the spelling of Hebrew, Islamic, or French
+names.
+
+ One common question concerning the Hebrew calendar is the computation
+of the anniversary of a date of death, called a "yahrzeit." The Emacs
+calendar includes a facility for such calculations. If you are in the
+calendar, the command `M-x list-yahrzeit-dates' asks you for a range of
+years and then displays a list of the yahrzeit dates for those years
+for the date given by point. If you are not in the calendar, this
+command first asks you for the date of death and the range of years,
+and then displays the list of yahrzeit dates.
\1f
-File: xemacs.info, Node: Sorting, Next: Shell, Prev: Calendar/Diary, Up: Top
-
-Sorting Text
-============
-
- XEmacs provides several commands for sorting text in a buffer. All
-operate on the contents of the region (the text between point and the
-mark). They divide the text of the region into many "sort records",
-identify a "sort key" for each record, and then reorder the records
-using the order determined by the sort keys. The records are ordered so
-that their keys are in alphabetical order, or, for numerical sorting, in
-numerical order. In alphabetical sorting, all upper-case letters `A'
-through `Z' come before lower-case `a', in accordance with the ASCII
-character sequence.
-
- The sort commands differ in how they divide the text into sort
-records and in which part of each record they use as the sort key.
-Most of the commands make each line a separate sort record, but some
-commands use paragraphs or pages as sort records. Most of the sort
-commands use each entire sort record as its own sort key, but some use
-only a portion of the record as the sort key.
-
-`M-x sort-lines'
- Divide the region into lines and sort by comparing the entire text
- of a line. A prefix argument means sort in descending order.
-
-`M-x sort-paragraphs'
- Divide the region into paragraphs and sort by comparing the entire
- text of a paragraph (except for leading blank lines). A prefix
- argument means sort in descending order.
-
-`M-x sort-pages'
- Divide the region into pages and sort by comparing the entire text
- of a page (except for leading blank lines). A prefix argument
- means sort in descending order.
-
-`M-x sort-fields'
- Divide the region into lines and sort by comparing the contents of
- one field in each line. Fields are defined as separated by
- whitespace, so the first run of consecutive non-whitespace
- characters in a line constitutes field 1, the second such run
- constitutes field 2, etc.
-
- You specify which field to sort by with a numeric argument: 1 to
- sort by field 1, etc. A negative argument means sort in descending
- order. Thus, minus 2 means sort by field 2 in reverse-alphabetical
- order.
-
-`M-x sort-numeric-fields'
- Like `M-x sort-fields', except the specified field is converted to
- a number for each line and the numbers are compared. `10' comes
- before `2' when considered as text, but after it when considered
- as a number.
-
-`M-x sort-columns'
- Like `M-x sort-fields', except that the text within each line used
- for comparison comes from a fixed range of columns. An explanation
- is given below.
-
- For example, if the buffer contains:
-
- On systems where clash detection (locking of files being edited) is
- implemented, XEmacs also checks the first time you modify a buffer
- whether the file has changed on disk since it was last visited or
- saved. If it has, you are asked to confirm that you want to change
- the buffer.
-
-then if you apply `M-x sort-lines' to the entire buffer you get:
-
- On systems where clash detection (locking of files being edited) is
- implemented, XEmacs also checks the first time you modify a buffer
- saved. If it has, you are asked to confirm that you want to change
- the buffer.
- whether the file has changed on disk since it was last visited or
-
-where the upper case `O' comes before all lower case letters. If you
-apply instead `C-u 2 M-x sort-fields' you get:
-
- saved. If it has, you are asked to confirm that you want to change
- implemented, XEmacs also checks the first time you modify a buffer
- the buffer.
- On systems where clash detection (locking of files being edited) is
- whether the file has changed on disk since it was last visited or
-
-where the sort keys were `If', `XEmacs', `buffer', `systems', and `the'.
-
- `M-x sort-columns' requires more explanation. You specify the
-columns by putting point at one of the columns and the mark at the other
-column. Because this means you cannot put point or the mark at the
-beginning of the first line to sort, this command uses an unusual
-definition of `region': all of the line point is in is considered part
-of the region, and so is all of the line the mark is in.
-
- For example, to sort a table by information found in columns 10 to
-15, you could put the mark on column 10 in the first line of the table,
-and point on column 15 in the last line of the table, and then use this
-command. Or you could put the mark on column 15 in the first line and
-point on column 10 in the last line.
-
- This can be thought of as sorting the rectangle specified by point
-and the mark, except that the text on each line to the left or right of
-the rectangle moves along with the text inside the rectangle. *Note
-Rectangles::.
+File: xemacs.info, Node: Mayan Calendar, Next: Diary, Prev: From Other Calendar, Up: Other Calendars
+
+Converting from the Mayan Calendar
+----------------------------------
+
+ Here are the commands to select dates based on the Mayan calendar:
+
+`g m l'
+ Move to a date specified by the long count calendar
+ (`calendar-goto-mayan-long-count-date').
+
+`g m n t'
+ Move to the next occurrence of a place in the tzolkin calendar
+ (`calendar-next-tzolkin-date').
+
+`g m p t'
+ Move to the previous occurrence of a place in the tzolkin calendar
+ (`calendar-previous-tzolkin-date').
+
+`g m n h'
+ Move to the next occurrence of a place in the haab calendar
+ (`calendar-next-haab-date').
+
+`g m p h'
+ Move to the previous occurrence of a place in the haab calendar
+ (`calendar-previous-haab-date').
+
+`g m n c'
+ Move to the next occurrence of a place in the calendar round
+ (`calendar-next-calendar-round-date').
+
+`g m p c'
+ Move to the previous occurrence of a place in the calendar round
+ (`calendar-previous-calendar-round-date').
+
+ To understand these commands, you need to understand the Mayan
+calendars. The "long count" is a counting of days with these units:
+
+ 1 kin = 1 day 1 uinal = 20 kin 1 tun = 18 uinal
+ 1 katun = 20 tun 1 baktun = 20 katun
+
+Thus, the long count date 12.16.11.16.6 means 12 baktun, 16 katun, 11
+tun, 16 uinal, and 6 kin. The Emacs calendar can handle Mayan long
+count dates as early as 7.17.18.13.1, but no earlier. When you use the
+`g m l' command, type the Mayan long count date with the baktun, katun,
+tun, uinal, and kin separated by periods.
+
+ The Mayan tzolkin calendar is a cycle of 260 days formed by a pair of
+independent cycles of 13 and 20 days. Since this cycle repeats
+endlessly, Emacs provides commands to move backward and forward to the
+previous or next point in the cycle. Type `g m p t' to go to the
+previous tzolkin date; Emacs asks you for a tzolkin date and moves point
+to the previous occurrence of that date. Similarly, type `g m n t' to
+go to the next occurrence of a tzolkin date.
+
+ The Mayan haab calendar is a cycle of 365 days arranged as 18 months
+of 20 days each, followed a 5-day monthless period. Like the tzolkin
+cycle, this cycle repeats endlessly, and there are commands to move
+backward and forward to the previous or next point in the cycle. Type
+`g m p h' to go to the previous haab date; Emacs asks you for a haab
+date and moves point to the previous occurrence of that date.
+Similarly, type `g m n h' to go to the next occurrence of a haab date.
+
+ The Maya also used the combination of the tzolkin date and the haab
+date. This combination is a cycle of about 52 years called a _calendar
+round_. If you type `g m p c', Emacs asks you for both a haab and a
+tzolkin date and then moves point to the previous occurrence of that
+combination. Use `g m n c' to move point to the next occurrence of a
+combination. These commands signal an error if the haab/tzolkin date
+combination you have typed is impossible.
+
+ Emacs uses strict completion (*note Completion::) whenever it asks
+you to type a Mayan name, so you don't have to worry about spelling.
\1f
-File: xemacs.info, Node: Shell, Next: Narrowing, Prev: Sorting, Up: Top
-
-Running Shell Commands from XEmacs
-==================================
-
- XEmacs has commands for passing single command lines to inferior
-shell processes; it can also run a shell interactively with input and
-output to an XEmacs buffer `*shell*'.
+File: xemacs.info, Node: Diary, Next: Calendar Customization, Prev: Mayan Calendar, Up: Calendar/Diary
-`M-!'
- Run a specified shell command line and display the output
- (`shell-command').
-
-`M-|'
- Run a specified shell command line with region contents as input;
- optionally replace the region with the output
- (`shell-command-on-region').
-
-`M-x shell'
- Run a subshell with input and output through an XEmacs buffer.
- You can then give commands interactively.
+The Diary
+---------
-`M-x term'
- Run a subshell with input and output through an XEmacs buffer.
- You can then give commands interactively. Full terminal emulation
- is available.
+ The Emacs diary keeps track of appointments or other events on a
+daily basis, in conjunction with the calendar. To use the diary
+feature, you must first create a "diary file" containing a list of
+events and their dates. Then Emacs can automatically pick out and
+display the events for today, for the immediate future, or for any
+specified date.
+
+ By default, Emacs uses `~/diary' as the diary file. This is the
+same file that the `calendar' utility uses. A sample `~/diary' file is:
+
+ 12/22/1988 Twentieth wedding anniversary!!
+ &1/1. Happy New Year!
+ 10/22 Ruth's birthday.
+ * 21, *: Payday
+ Tuesday--weekly meeting with grad students at 10am
+ Supowit, Shen, Bitner, and Kapoor to attend.
+ 1/13/89 Friday the thirteenth!!
+ &thu 4pm squash game with Lloyd.
+ mar 16 Dad's birthday
+ April 15, 1989 Income tax due.
+ &* 15 time cards due.
+
+This example uses extra spaces to align the event descriptions of most
+of the entries. Such formatting is purely a matter of taste.
+
+ Although you probably will start by creating a diary manually, Emacs
+provides a number of commands to let you view, add, and change diary
+entries. You can also share diary entries with other users (*note
+Included Diary Files::).
* Menu:
-* Single Shell:: How to run one shell command and return.
-* Interactive Shell:: Permanent shell taking input via XEmacs.
-* Shell Mode:: Special XEmacs commands used with permanent shell.
-* Terminal emulator:: An XEmacs window as a terminal emulator.
-* Term Mode:: Special XEmacs commands used in Term mode.
-* Paging in Term:: Paging in the terminal emulator.
+* Diary Commands:: Viewing diary entries and associated calendar dates.
+* Format of Diary File:: Entering events in your diary.
+* Date Formats:: Various ways you can specify dates.
+* Adding to Diary:: Commands to create diary entries.
+* Special Diary Entries:: Anniversaries, blocks of dates, cyclic entries, etc.
\1f
-File: xemacs.info, Node: Single Shell, Next: Interactive Shell, Prev: Shell, Up: Shell
+File: xemacs.info, Node: Diary Commands, Next: Format of Diary File, Prev: Diary, Up: Diary
-Single Shell Commands
----------------------
+Commands Displaying Diary Entries
+---------------------------------
- `M-!' (`shell-command') reads a line of text using the minibuffer
-and creates an inferior shell to execute the line as a command.
-Standard input from the command comes from the null device. If the
-shell command produces any output, the output goes to an XEmacs buffer
-named `*Shell Command Output*', which is displayed in another window
-but not selected. A numeric argument, as in `M-1 M-!', directs this
-command to insert any output into the current buffer. In that case,
-point is left before the output and the mark is set after the output.
-
- `M-|' (`shell-command-on-region') is like `M-!' but passes the
-contents of the region as input to the shell command, instead of no
-input. If a numeric argument is used to direct output to the current
-buffer, then the old region is deleted first and the output replaces it
-as the contents of the region.
-
- Both `M-!' and `M-|' use `shell-file-name' to specify the shell to
-use. This variable is initialized based on your `SHELL' environment
-variable when you start XEmacs. If the file name does not specify a
-directory, the directories in the list `exec-path' are searched; this
-list is initialized based on the `PATH' environment variable when you
-start XEmacs. You can override either or both of these default
-initializations in your `.emacs' file.
-
- When you use `M-!' and `M-|', XEmacs has to wait until the shell
-command completes. You can quit with `C-g'; that terminates the shell
-command.
+ Once you have created a `~/diary' file, you can use the calendar to
+view it. You can also view today's events outside of Calendar mode.
-\1f
-File: xemacs.info, Node: Interactive Shell, Next: Shell Mode, Prev: Single Shell, Up: Shell
-
-Interactive Inferior Shell
---------------------------
-
- To run a subshell interactively with its typescript in an XEmacs
-buffer, use `M-x shell'. This creates (or reuses) a buffer named
-`*shell*' and runs a subshell with input coming from and output going
-to that buffer. That is to say, any "terminal output" from the subshell
-will go into the buffer, advancing point, and any "terminal input" for
-the subshell comes from text in the buffer. To give input to the
-subshell, go to the end of the buffer and type the input, terminated by
-<RET>.
-
- XEmacs does not wait for the subshell to do anything. You can switch
-windows or buffers and edit them while the shell is waiting, or while
-it is running a command. Output from the subshell waits until XEmacs
-has time to process it; this happens whenever XEmacs is waiting for
-keyboard input or for time to elapse.
-
- To get multiple subshells, change the name of buffer `*shell*' to
-something different by using `M-x rename-buffer'. The next use of `M-x
-shell' creates a new buffer `*shell*' with its own subshell. By
-renaming this buffer as well you can create a third one, and so on.
-All the subshells run independently and in parallel.
-
- The file name used to load the subshell is the value of the variable
-`explicit-shell-file-name', if that is non-`nil'. Otherwise, the
-environment variable `ESHELL' is used, or the environment variable
-`SHELL' if there is no `ESHELL'. If the file name specified is
-relative, the directories in the list `exec-path' are searched (*note
-Single Shell Commands: Single Shell.).
-
- As soon as the subshell is started, it is sent as input the contents
-of the file `~/.emacs_SHELLNAME', if that file exists, where SHELLNAME
-is the name of the file that the shell was loaded from. For example,
-if you use `csh', the file sent to it is `~/.emacs_csh'.
-
- `cd', `pushd', and `popd' commands given to the inferior shell are
-watched by XEmacs so it can keep the `*shell*' buffer's default
-directory the same as the shell's working directory. These commands
-are recognized syntactically by examining lines of input that are sent.
-If you use aliases for these commands, you can tell XEmacs to
-recognize them also. For example, if the value of the variable
-`shell-pushd-regexp' matches the beginning of a shell command line,
-that line is regarded as a `pushd' command. Change this variable when
-you add aliases for `pushd'. Likewise, `shell-popd-regexp' and
-`shell-cd-regexp' are used to recognize commands with the meaning of
-`popd' and `cd'.
-
- `M-x shell-resync-dirs' queries the shell and resynchronizes XEmacs'
-idea of what the current directory stack is. `M-x
-shell-dirtrack-toggle' turns directory tracking on and off.
-
- XEmacs keeps a history of the most recent commands you have typed in
-the `*shell*' buffer. If you are at the beginning of a shell command
-line and type <M-p>, the previous shell input is inserted into the
-buffer before point. Immediately typing <M-p> again deletes that input
-and inserts the one before it. By repeating <M-p> you can move
-backward through your commands until you find one you want to repeat.
-You may then edit the command before typing <RET> if you wish. <M-n>
-moves forward through the command history, in case you moved backward
-past the one you wanted while using <M-p>. If you type the first few
-characters of a previous command and then type <M-p>, the most recent
-shell input starting with those characters is inserted. This can be
-very convenient when you are repeating a sequence of shell commands.
-The variable `input-ring-size' controls how many commands are saved in
-your input history. The default is 30.
+`d'
+ Display all diary entries for the selected date
+ (`view-diary-entries').
-\1f
-File: xemacs.info, Node: Shell Mode, Next: Terminal emulator, Prev: Interactive Shell, Up: Shell
-
-Shell Mode
-----------
-
- The shell buffer uses Shell mode, which defines several special keys
-attached to the `C-c' prefix. They are chosen to resemble the usual
-editing and job control characters present in shells that are not under
-XEmacs, except that you must type `C-c' first. Here is a list of the
-special key bindings of Shell mode:
-
-`<RET>'
- At end of buffer send line as input; otherwise, copy current line
- to end of buffer and send it (`send-shell-input'). When a line is
- copied, any text at the beginning of the line that matches the
- variable `shell-prompt-pattern' is left out; this variable's value
- should be a regexp string that matches the prompts that you use in
- your subshell.
-
-`C-c C-d'
- Send end-of-file as input, probably causing the shell or its
- current subjob to finish (`shell-send-eof').
-
-`C-d'
- If point is not at the end of the buffer, delete the next
- character just like most other modes. If point is at the end of
- the buffer, send end-of-file as input, instead of generating an
- error as in other modes (`comint-delchar-or-maybe-eof').
-
-`C-c C-u'
- Kill all text that has yet to be sent as input
- (`kill-shell-input').
-
-`C-c C-w'
- Kill a word before point (`backward-kill-word').
-
-`C-c C-c'
- Interrupt the shell or its current subjob if any
- (`interrupt-shell-subjob').
-
-`C-c C-z'
- Stop the shell or its current subjob if any (`stop-shell-subjob').
-
-`C-c C-\'
- Send quit signal to the shell or its current subjob if any
- (`quit-shell-subjob').
-
-`C-c C-o'
- Delete last batch of output from shell (`kill-output-from-shell').
-
-`C-c C-r'
- Scroll top of last batch of output to top of window
- (`show-output-from-shell').
-
-`C-c C-y'
- Copy the previous bunch of shell input and insert it into the
- buffer before point (`copy-last-shell-input'). No final newline
- is inserted, and the input copied is not resubmitted until you type
- <RET>.
-
-`M-p'
- Move backward through the input history. Search for a matching
- command if you have typed the beginning of a command
- (`comint-previous-input').
-
-`M-n'
- Move forward through the input history. Useful when you are using
- <M-p> quickly and go past the desired command
- (`comint-next-input').
-
-`<TAB>'
- Complete the file name preceding point (`comint-dynamic-complete').
+`Button2 Diary'
+ Display all diary entries for the date you click on.
-\1f
-File: xemacs.info, Node: Terminal emulator, Next: Term Mode, Prev: Shell Mode, Up: Shell
-
-Interactive Inferior Shell with Terminal Emulator
--------------------------------------------------
-
- To run a subshell in a terminal emulator, putting its typescript in
-an XEmacs buffer, use `M-x term'. This creates (or reuses) a buffer
-named `*term*' and runs a subshell with input coming from your keyboard
-and output going to that buffer.
-
- All the normal keys that you type are sent without any interpretation
-by XEmacs directly to the subshell, as "terminal input." Any "echo" of
-your input is the responsibility of the subshell. (The exception is
-the terminal escape character, which by default is `C-c'. *note Term
-Mode::..) Any "terminal output" from the subshell goes into the buffer,
-advancing point.
-
- Some programs (such as XEmacs itself) need to control the appearance
-on the terminal screen in detail. They do this by sending special
-control codes. The exact control codes needed vary from terminal to
-terminal, but nowadays most terminals and terminal emulators (including
-xterm) understand the so-called "ANSI escape sequences" (first
-popularized by the Digital's VT100 family of terminal). The term mode
-also understands these escape sequences, and for each control code does
-the appropriate thing to change the buffer so that the appearance of
-the window will match what it would be on a real terminal. Thus you
-can actually run XEmacs inside an XEmacs Term window!
-
- XEmacs does not wait for the subshell to do anything. You can switch
-windows or buffers and edit them while the shell is waiting, or while
-it is running a command. Output from the subshell waits until XEmacs
-has time to process it; this happens whenever XEmacs is waiting for
-keyboard input or for time to elapse.
-
- To make multiple terminal emulators, rename the buffer `*term*' to
-something different using `M-x rename-uniquely', just as with Shell
-mode.
-
- The file name used to load the subshell is determined the same way
-as for Shell mode.
-
- Unlike Shell mode, Term mode does not track the current directory by
-examining your input. Instead, if you use a programmable shell, you
-can have it tell Term what the current directory is. This is done
-automatically by bash for version 1.15 and later.
+`s'
+ Display the entire diary file (`show-all-diary-entries').
-\1f
-File: xemacs.info, Node: Term Mode, Next: Paging in Term, Prev: Terminal emulator, Up: Shell
+`m'
+ Mark all visible dates that have diary entries
+ (`mark-diary-entries').
-Term Mode
----------
+`u'
+ Unmark the calendar window (`calendar-unmark').
- Term uses Term mode, which has two input modes: In line mode, Term
-basically acts like Shell mode. *Note Shell Mode::. In Char mode,
-each character is sent directly to the inferior subshell, except for
-the Term escape character, normally `C-c'.
+`M-x print-diary-entries'
+ Print hard copy of the diary display as it appears.
- To switch between line and char mode, use these commands:
- findex term-char-mode
+`M-x diary'
+ Display all diary entries for today's date.
-`C-c C-k'
- Switch to line mode. Do nothing if already in line mode.
+`M-x diary-mail-entries'
+ Mail yourself email reminders about upcoming diary entries.
-`C-c C-j'
- Switch to char mode. Do nothing if already in char mode.
+ Displaying the diary entries with `d' shows in a separate window the
+diary entries for the selected date in the calendar. The mode line of
+the new window shows the date of the diary entries and any holidays
+that fall on that date. If you specify a numeric argument with `d', it
+shows all the diary entries for that many successive days. Thus, `2 d'
+displays all the entries for the selected date and for the following
+day.
- The following commands are only available in Char mode:
-`C-c C-c'
- Send a literal <C-c> to the sub-shell.
+ Another way to display the diary entries for a date is to click
+`Button2' on the date, and then choose `Diary' from the menu that
+appears.
-`C-c C-x'
- A prefix command to conveniently access the global <C-x> commands.
- For example, `C-c C-x o' invokes the global binding of `C-x o',
- which is normally `other-window'.
+ To get a broader view of which days are mentioned in the diary, use
+the `m' command. This displays the dates that have diary entries in a
+different face (or places a `+' after these dates, if display with
+multiple faces is not available). The command applies both to the
+currently visible months and to other months that subsequently become
+visible by scrolling. To turn marking off and erase the current marks,
+type `u', which also turns off holiday marks (*note Holidays::).
-\1f
-File: xemacs.info, Node: Paging in Term, Prev: Term Mode, Up: Shell
+ To see the full diary file, rather than just some of the entries, use
+the `s' command.
-Paging in the terminal emulator
--------------------------------
+ Display of selected diary entries uses the selective display feature
+to hide entries that don't apply.
- Term mode has a pager feature. When the pager is enabled, term mode
-will pause at the end of each screenful.
+ The diary buffer as you see it is an illusion, so simply printing the
+buffer does not print what you see on your screen. There is a special
+command to print hard copy of the diary buffer _as it appears_; this
+command is `M-x print-diary-entries'. It sends the data directly to
+the printer. You can customize it like `lpr-region' (*note Hardcopy::).
-`C-c C-q'
- Toggles the pager feature: Disables the pager if it is enabled,
- and vice versa. This works in both line and char modes. If the
- pager enabled, the mode-line contains the word `page'.
+ The command `M-x diary' displays the diary entries for the current
+date, independently of the calendar display, and optionally for the next
+few days as well; the variable `number-of-diary-entries' specifies how
+many days to include (*note Customization::).
- If the pager is enabled, and Term receives more than a screenful of
-output since your last input, Term will enter More break mode. This is
-indicated by `**MORE**' in the mode-line. Type a `Space' to display
-the next screenful of output. Type `?' to see your other options. The
-interface is similar to the Unix `more' program.
+ If you put `(diary)' in your init file, this automatically displays
+a window with the day's diary entries, when you enter Emacs. *Note
+Init File::. The mode line of the displayed window shows the date and
+any holidays that fall on that date.
-\1f
-File: xemacs.info, Node: Narrowing, Next: Hardcopy, Prev: Shell, Up: Top
-
-Narrowing
-=========
-
- "Narrowing" means focusing in on some portion of the buffer, making
-the rest temporarily invisible and inaccessible. Cancelling the
-narrowing and making the entire buffer once again visible is called
-"widening". The amount of narrowing in effect in a buffer at any time
-is called the buffer's "restriction".
-
-`C-x n n'
- Narrow down to between point and mark (`narrow-to-region').
-
-`C-x n w'
- Widen to make the entire buffer visible again (`widen').
-
- Narrowing sometimes makes it easier to concentrate on a single
-subroutine or paragraph by eliminating clutter. It can also be used to
-restrict the range of operation of a replace command or repeating
-keyboard macro. The word `Narrow' appears in the mode line whenever
-narrowing is in effect. When you have narrowed to a part of the
-buffer, that part appears to be all there is. You can't see the rest,
-can't move into it (motion commands won't go outside the visible part),
-and can't change it in any way. However, the invisible text is not
-gone; if you save the file, it will be saved.
-
- The primary narrowing command is `C-x n n' (`narrow-to-region'). It
-sets the current buffer's restrictions so that the text in the current
-region remains visible but all text before the region or after the
-region is invisible. Point and mark do not change.
-
- Because narrowing can easily confuse users who do not understand it,
-`narrow-to-region' is normally a disabled command. Attempting to use
-this command asks for confirmation and gives you the option of enabling
-it; once you enable the command, confirmation will no longer be
-required. *Note Disabling::.
-
- To undo narrowing, use `C-x n w' (`widen'). This makes all text in
-the buffer accessible again.
-
- Use the `C-x =' command to get information on what part of the
-buffer you narrowed down. *Note Position Info::.
+ Many users like to receive notice of events in their diary as email.
+To send such mail to yourself, use the command `M-x
+diary-mail-entries'. A prefix argument specifies how many days
+(starting with today) to check; otherwise, the variable
+`diary-mail-days' says how many days.
\1f
-File: xemacs.info, Node: Hardcopy, Next: Recursive Edit, Prev: Narrowing, Up: Top
-
-Hardcopy Output
-===============
-
- The XEmacs commands for making hardcopy derive their names from the
-Unix commands `print' and `lpr'.
-
-`M-x print-buffer'
- Print hardcopy of current buffer using Unix command `print'
- (`lpr -p'). This command adds page headings containing the file
- name and page number.
-
-`M-x lpr-buffer'
- Print hardcopy of current buffer using Unix command `lpr'. This
- command does not add page headings.
-
-`M-x print-region'
- Like `print-buffer', but prints only the current region.
-
-`M-x lpr-region'
- Like `lpr-buffer', but prints only the current region.
-
- All the hardcopy commands pass extra switches to the `lpr' program
-based on the value of the variable `lpr-switches'. Its value should be
-a list of strings, each string a switch starting with `-'. For
-example, the value could be `("-Pfoo")' to print on printer `foo'.
-
-\1f
-File: xemacs.info, Node: Recursive Edit, Next: Dissociated Press, Prev: Hardcopy, Up: Top
-
-Recursive Editing Levels
-========================
-
- A "recursive edit" is a situation in which you are using XEmacs
-commands to perform arbitrary editing while in the middle of another
-XEmacs command. For example, when you type `C-r' inside a
-`query-replace', you enter a recursive edit in which you can change the
-current buffer. When you exit from the recursive edit, you go back to
-the `query-replace'.
-
- "Exiting" a recursive edit means returning to the unfinished
-command, which continues execution. For example, exiting the recursive
-edit requested by `C-r' in `query-replace' causes query replacing to
-resume. Exiting is done with `C-M-c' (`exit-recursive-edit').
-
- You can also "abort" a recursive edit. This is like exiting, but
-also quits the unfinished command immediately. Use the command `C-]'
-(`abort-recursive-edit') for this. *Note Quitting::.
-
- The mode line shows you when you are in a recursive edit by
-displaying square brackets around the parentheses that always surround
-the major and minor mode names. Every window's mode line shows the
-square brackets, since XEmacs as a whole, rather than any particular
-buffer, is in a recursive edit.
-
- It is possible to be in recursive edits within recursive edits. For
-example, after typing `C-r' in a `query-replace', you might type a
-command that entered the debugger. In such a case, two or more sets of
-square brackets appear in the mode line(s). Exiting the inner
-recursive edit (here with the debugger `c' command) resumes the
-query-replace command where it called the debugger. After the end of
-the query-replace command, you would be able to exit the first
-recursive edit. Aborting exits only one level of recursive edit; it
-returns to the command level of the previous recursive edit. You can
-then abort that one as well.
-
- The command `M-x top-level' aborts all levels of recursive edits,
-returning immediately to the top level command reader.
-
- The text you edit inside the recursive edit need not be the same text
-that you were editing at top level. If the command that invokes the
-recursive edit selects a different buffer first, that is the buffer you
-will edit recursively. You can switch buffers within the recursive edit
-in the normal manner (as long as the buffer-switching keys have not been
-rebound). While you could theoretically do the rest of your editing
-inside the recursive edit, including visiting files, this could have
-surprising effects (such as stack overflow) from time to time. It is
-best if you always exit or abort a recursive edit when you no longer
-need it.
-
- In general, XEmacs tries to avoid using recursive edits. It is
-usually preferable to allow users to switch among the possible editing
-modes in any order they like. With recursive edits, the only way to get
-to another state is to go "back" to the state that the recursive edit
-was invoked from.
+File: xemacs.info, Node: Format of Diary File, Next: Date Formats, Prev: Diary Commands, Up: Diary
+
+The Diary File
+--------------
+
+ Your "diary file" is a file that records events associated with
+particular dates. The name of the diary file is specified by the
+variable `diary-file'; `~/diary' is the default. The `calendar'
+utility program supports a subset of the format allowed by the Emacs
+diary facilities, so you can use that utility to view the diary file,
+with reasonable results aside from the entries it cannot understand.
+
+ Each entry in the diary file describes one event and consists of one
+or more lines. An entry always begins with a date specification at the
+left margin. The rest of the entry is simply text to describe the
+event. If the entry has more than one line, then the lines after the
+first must begin with whitespace to indicate they continue a previous
+entry. Lines that do not begin with valid dates and do not continue a
+preceding entry are ignored.
+
+ You can inhibit the marking of certain diary entries in the calendar
+window; to do this, insert an ampersand (`&') at the beginning of the
+entry, before the date. This has no effect on display of the entry in
+the diary window; it affects only marks on dates in the calendar
+window. Nonmarking entries are especially useful for generic entries
+that would otherwise mark many different dates.
+
+ If the first line of a diary entry consists only of the date or day
+name with no following blanks or punctuation, then the diary window
+display doesn't include that line; only the continuation lines appear.
+For example, this entry:
+
+ 02/11/1989
+ Bill B. visits Princeton today
+ 2pm Cognitive Studies Committee meeting
+ 2:30-5:30 Liz at Lawrenceville
+ 4:00pm Dentist appt
+ 7:30pm Dinner at George's
+ 8:00-10:00pm concert
+
+appears in the diary window without the date line at the beginning.
+This style of entry looks neater when you display just a single day's
+entries, but can cause confusion if you ask for more than one day's
+entries.
+
+ You can edit the diary entries as they appear in the window, but it
+is important to remember that the buffer displayed contains the _entire_
+diary file, with portions of it concealed from view. This means, for
+instance, that the `C-f' (`forward-char') command can put point at what
+appears to be the end of the line, but what is in reality the middle of
+some concealed line.
+
+ _Be careful when editing the diary entries!_ Inserting additional
+lines or adding/deleting characters in the middle of a visible line
+cannot cause problems, but editing at the end of a line may not do what
+you expect. Deleting a line may delete other invisible entries that
+follow it. Before editing the diary, it is best to display the entire
+file with `s' (`show-all-diary-entries').
\1f
-File: xemacs.info, Node: Dissociated Press, Next: CONX, Prev: Recursive Edit, Up: Top
-
-Dissociated Press
-=================
-
- `M-x dissociated-press' is a command for scrambling a file of text
-either word by word or character by character. Starting from a buffer
-of straight English, it produces extremely amusing output. The input
-comes from the current XEmacs buffer. Dissociated Press writes its
-output in a buffer named `*Dissociation*', and redisplays that buffer
-after every couple of lines (approximately) to facilitate reading it.
-
- `dissociated-press' asks every so often whether to continue
-operating. Answer `n' to stop it. You can also stop at any time by
-typing `C-g'. The dissociation output remains in the `*Dissociation*'
-buffer for you to copy elsewhere if you wish.
-
- Dissociated Press operates by jumping at random from one point in the
-buffer to another. In order to produce plausible output rather than
-gibberish, it insists on a certain amount of overlap between the end of
-one run of consecutive words or characters and the start of the next.
-That is, if it has just printed out `president' and then decides to
-jump to a different point in the file, it might spot the `ent' in
-`pentagon' and continue from there, producing `presidentagon'. Long
-sample texts produce the best results.
-
- A positive argument to `M-x dissociated-press' tells it to operate
-character by character, and specifies the number of overlap characters.
-A negative argument tells it to operate word by word and specifies the
-number of overlap words. In this mode, whole words are treated as the
-elements to be permuted, rather than characters. No argument is
-equivalent to an argument of two. For your againformation, the output
-goes only into the buffer `*Dissociation*'. The buffer you start with
-is not changed.
-
- Dissociated Press produces nearly the same results as a Markov chain
-based on a frequency table constructed from the sample text. It is,
-however, an independent, ignoriginal invention. Dissociated Press
-techniquitously copies several consecutive characters from the sample
-between random choices, whereas a Markov chain would choose randomly for
-each word or character. This makes for more plausible sounding results
-and runs faster.
-
- It is a mustatement that too much use of Dissociated Press can be a
-developediment to your real work. Sometimes to the point of outragedy.
-And keep dissociwords out of your documentation, if you want it to be
-well userenced and properbose. Have fun. Your buggestions are welcome.
+File: xemacs.info, Node: Date Formats, Next: Adding to Diary, Prev: Format of Diary File, Up: Diary
+
+Date Formats
+------------
+
+ Here are some sample diary entries, illustrating different ways of
+formatting a date. The examples all show dates in American order
+(month, day, year), but Calendar mode supports European order (day,
+month, year) as an option.
+
+ 4/20/93 Switch-over to new tabulation system
+ apr. 25 Start tabulating annual results
+ 4/30 Results for April are due
+ */25 Monthly cycle finishes
+ Friday Don't leave without backing up files
+
+ The first entry appears only once, on April 20, 1993. The second and
+third appear every year on the specified dates, and the fourth uses a
+wildcard (asterisk) for the month, so it appears on the 25th of every
+month. The final entry appears every week on Friday.
+
+ You can use just numbers to express a date, as in `MONTH/DAY' or
+`MONTH/DAY/YEAR'. This must be followed by a nondigit. In the date
+itself, MONTH and DAY are numbers of one or two digits. The optional
+YEAR is also a number, and may be abbreviated to the last two digits;
+that is, you can use `11/12/1989' or `11/12/89'.
+
+ Dates can also have the form `MONTHNAME DAY' or `MONTHNAME DAY,
+YEAR', where the month's name can be spelled in full or abbreviated to
+three characters (with or without a period). Case is not significant.
+
+ A date may be "generic"; that is, partially unspecified. Then the
+entry applies to all dates that match the specification. If the date
+does not contain a year, it is generic and applies to any year.
+Alternatively, MONTH, DAY, or YEAR can be a `*'; this matches any
+month, day, or year, respectively. Thus, a diary entry `3/*/*' matches
+any day in March of any year; so does `march *'.
+
+ If you prefer the European style of writing dates--in which the day
+comes before the month--type `M-x european-calendar' while in the
+calendar, or set the variable `european-calendar-style' to `t' _before_
+using any calendar or diary command. This mode interprets all dates in
+the diary in the European manner, and also uses European style for
+displaying diary dates. (Note that there is no comma after the
+MONTHNAME in the European style.) To go back to the (default) American
+style of writing dates, type `M-x american-calendar'.
+
+ You can use the name of a day of the week as a generic date which
+applies to any date falling on that day of the week. You can abbreviate
+the day of the week to three letters (with or without a period) or spell
+it in full; case is not significant.
\1f
-File: xemacs.info, Node: CONX, Next: Amusements, Prev: Dissociated Press, Up: Top
-
-CONX
-====
-
- Besides producing a file of scrambled text with Dissociated Press,
-you can generate random sentences by using CONX.
-
-`M-x conx'
- Generate random sentences in the `*conx*' buffer.
+File: xemacs.info, Node: Adding to Diary, Next: Special Diary Entries, Prev: Date Formats, Up: Diary
-`M-x conx-buffer'
- Absorb the text in the current buffer into the `conx' database.
-
-`M-x conx-init'
- Forget the current word-frequency tree.
+Commands to Add to the Diary
+----------------------------
-`M-x conx-load'
- Load a `conx' database that has been previously saved with `M-x
- conx-save'.
+ While in the calendar, there are several commands to create diary
+entries:
-`M-x conx-region'
- Absorb the text in the current buffer into the `conx' database.
+`i d'
+ Add a diary entry for the selected date (`insert-diary-entry').
-`M-x conx-save'
- Save the current `conx' database to a file for future retrieval.
+`i w'
+ Add a diary entry for the selected day of the week
+ (`insert-weekly-diary-entry').
- Copy text from a buffer using `M-x conx-buffer' or `M-x conx-region'
-and then type `M-x conx'. Output is continuously generated until you
-type <^G>. You can save the `conx' database to a file with `M-x
-conx-save', which you can retrieve with `M-x conx-load'. To clear the
-database, use `M-x conx-init'.
+`i m'
+ Add a diary entry for the selected day of the month
+ (`insert-monthly-diary-entry').
-\1f
-File: xemacs.info, Node: Amusements, Next: Emulation, Prev: CONX, Up: Top
+`i y'
+ Add a diary entry for the selected day of the year
+ (`insert-yearly-diary-entry').
-Other Amusements
-================
+ You can make a diary entry for a specific date by selecting that date
+in the calendar window and typing the `i d' command. This command
+displays the end of your diary file in another window and inserts the
+date; you can then type the rest of the diary entry.
- If you are a little bit bored, you can try `M-x hanoi'. If you are
-considerably bored, give it a numeric argument. If you are very, very
-bored, try an argument of 9. Sit back and watch.
+ If you want to make a diary entry that applies to a specific day of
+the week, select that day of the week (any occurrence will do) and type
+`i w'. This inserts the day-of-week as a generic date; you can then
+type the rest of the diary entry. You can make a monthly diary entry in
+the same fashion. Select the day of the month, use the `i m' command,
+and type rest of the entry. Similarly, you can insert a yearly diary
+entry with the `i y' command.
- When you are frustrated, try the famous Eliza program. Just do `M-x
-doctor'. End each input by typing `RET' twice.
+ All of the above commands make marking diary entries by default. To
+make a nonmarking diary entry, give a numeric argument to the command.
+For example, `C-u i w' makes a nonmarking weekly diary entry.
- When you are feeling strange, type `M-x yow'.
+ When you modify the diary file, be sure to save the file before
+exiting Emacs.
\1f
-File: xemacs.info, Node: Emulation, Next: Customization, Prev: Amusements, Up: Top
-
-Emulation
-=========
-
- XEmacs can be programmed to emulate (more or less) most other
-editors. Standard facilities can emulate these:
+File: xemacs.info, Node: Special Diary Entries, Prev: Adding to Diary, Up: Diary
-Viper (a vi emulator)
- In XEmacs, Viper is the preferred emulation of vi within XEmacs.
- Viper is designed to allow you to take advantage of the best
- features of XEmacs while still doing your basic editing in a
- familiar, vi-like fashion. Viper provides various different
- levels of vi emulation, from a quite complete emulation that
- allows almost no access to native XEmacs commands, to an "expert"
- mode that combines the most useful vi commands with the most
- useful XEmacs commands.
-
- To start Viper, put the command
-
- (viper-mode)
-
- in your `.emacs' file.
-
- Viper comes with a separate manual that is provided standard with
- the XEmacs distribution.
-
-EDT (DEC VMS editor)
- Turn on EDT emulation with `M-x edt-emulation-on'. `M-x
- edt-emulation-off' restores normal Emacs command bindings.
+Special Diary Entries
+---------------------
- Most of the EDT emulation commands are keypad keys, and most
- standard Emacs key bindings are still available. The EDT
- emulation rebindings are done in the global keymap, so there is no
- problem switching buffers or major modes while in EDT emulation.
+ In addition to entries based on calendar dates, the diary file can
+contain "sexp entries" for regular events such as anniversaries. These
+entries are based on Lisp expressions (sexps) that Emacs evaluates as
+it scans the diary file. Instead of a date, a sexp entry contains `%%'
+followed by a Lisp expression which must begin and end with
+parentheses. The Lisp expression determines which dates the entry
+applies to.
+
+ Calendar mode provides commands to insert certain commonly used sexp
+entries:
+
+`i a'
+ Add an anniversary diary entry for the selected date
+ (`insert-anniversary-diary-entry').
+
+`i b'
+ Add a block diary entry for the current region
+ (`insert-block-diary-entry').
+
+`i c'
+ Add a cyclic diary entry starting at the date
+ (`insert-cyclic-diary-entry').
+
+ If you want to make a diary entry that applies to the anniversary of
+a specific date, move point to that date and use the `i a' command.
+This displays the end of your diary file in another window and inserts
+the anniversary description; you can then type the rest of the diary
+entry. The entry looks like this:
+
+ The effect of `i a' is to add a `diary-anniversary' sexp to your
+diary file. You can also add one manually, for instance:
+
+ %%(diary-anniversary 10 31 1948) Arthur's birthday
+
+This entry applies to October 31 in any year after 1948; `10 31 1948'
+specifies the date. (If you are using the European calendar style, the
+month and day are interchanged.) The reason this expression requires a
+beginning year is that advanced diary functions can use it to calculate
+the number of elapsed years.
+
+ A "block" diary entry applies to a specified range of consecutive
+dates. Here is a block diary entry that applies to all dates from June
+24, 1990 through July 10, 1990:
+
+ %%(diary-block 6 24 1990 7 10 1990) Vacation
+
+The `6 24 1990' indicates the starting date and the `7 10 1990'
+indicates the stopping date. (Again, if you are using the European
+calendar style, the month and day are interchanged.)
+
+ To insert a block entry, place point and the mark on the two dates
+that begin and end the range, and type `i b'. This command displays
+the end of your diary file in another window and inserts the block
+description; you can then type the diary entry.
+
+ "Cyclic" diary entries repeat after a fixed interval of days. To
+create one, select the starting date and use the `i c' command. The
+command prompts for the length of interval, then inserts the entry,
+which looks like this:
+
+ %%(diary-cyclic 50 3 1 1990) Renew medication
+
+This entry applies to March 1, 1990 and every 50th day following; `3 1
+1990' specifies the starting date. (If you are using the European
+calendar style, the month and day are interchanged.)
+
+ All three of these commands make marking diary entries. To insert a
+nonmarking entry, give a numeric argument to the command. For example,
+`C-u i a' makes a nonmarking anniversary diary entry.
+
+ Marking sexp diary entries in the calendar is _extremely_
+time-consuming, since every date visible in the calendar window must be
+individually checked. So it's a good idea to make sexp diary entries
+nonmarking (with `&') when possible.
+
+ Another sophisticated kind of sexp entry, a "floating" diary entry,
+specifies a regularly occurring event by offsets specified in days,
+weeks, and months. It is comparable to a crontab entry interpreted by
+the `cron' utility. Here is a nonmarking, floating diary entry that
+applies to the last Thursday in November:
+
+ &%%(diary-float 11 4 -1) American Thanksgiving
+
+The 11 specifies November (the eleventh month), the 4 specifies Thursday
+(the fourth day of the week, where Sunday is numbered zero), and the -1
+specifies "last" (1 would mean "first", 2 would mean "second", -2 would
+mean "second-to-last", and so on). The month can be a single month or
+a list of months. Thus you could change the 11 above to `'(1 2 3)' and
+have the entry apply to the last Thursday of January, February, and
+March. If the month is `t', the entry applies to all months of the
+year.
+
+ The sexp feature of the diary allows you to specify diary entries
+based on any Emacs Lisp expression. You can use the library of built-in
+functions or you can write your own functions. The built-in functions
+include the ones shown in this section, plus a few others (*note Sexp
+Diary Entries::).
+
+ The generality of sexps lets you specify any diary entry that you can
+describe algorithmically. Suppose you get paid on the 21st of the month
+if it is a weekday, and to the Friday before if the 21st is on a
+weekend. The diary entry
-Gosling Emacs
- Turn on emulation of Gosling Emacs (aka Unipress Emacs) with `M-x
- set-gosmacs-bindings'. This redefines many keys, mostly on the
- `C-x' and `ESC' prefixes, to work as they do in Gosmacs. `M-x
- set-gnu-bindings' returns to normal XEmacs by rebinding the same
- keys to the definitions they had at the time `M-x
- set-gosmacs-bindings' was done.
+ &%%(let ((dayname (calendar-day-of-week date))
+ (day (car (cdr date))))
+ (or (and (= day 21) (memq dayname '(1 2 3 4 5)))
+ (and (memq day '(19 20)) (= dayname 5)))
+ ) Pay check deposited
- It is also possible to run Mocklisp code written for Gosling Emacs.
- *Note Mocklisp::.
+to just those dates. This example illustrates how the sexp can depend
+on the variable `date'; this variable is a list (MONTH DAY YEAR) that
+gives the Gregorian date for which the diary entries are being found.
+If the value of the sexp is `t', the entry applies to that date. If
+the sexp evaluates to `nil', the entry does _not_ apply to that date.
\1f
-File: xemacs.info, Node: Customization, Next: Quitting, Prev: Emulation, Up: Top
+File: xemacs.info, Node: Calendar Customization, Prev: Diary, Up: Calendar/Diary
-Customization
-*************
+Customizing the Calendar and Diary
+----------------------------------
- This chapter talks about various topics relevant to adapting the
-behavior of Emacs in minor ways.
-
- All kinds of customization affect only the particular Emacs job that
-you do them in. They are completely lost when you kill the Emacs job,
-and have no effect on other Emacs jobs you may run at the same time or
-later. The only way an Emacs job can affect anything outside of it is
-by writing a file; in particular, the only way to make a customization
-`permanent' is to put something in your `.emacs' file or other
-appropriate file to do the customization in each session. *Note Init
-File::.
+ There are many customizations that you can use to make the calendar
+and diary suit your personal tastes.
* Menu:
-* Minor Modes:: Each minor mode is one feature you can turn on
- independently of any others.
-* Variables:: Many Emacs commands examine Emacs variables
- to decide what to do; by setting variables,
- you can control their functioning.
-* Keyboard Macros:: A keyboard macro records a sequence of keystrokes
- to be replayed with a single command.
-* Key Bindings:: The keymaps say what command each key runs.
- By changing them, you can "redefine keys".
-* Syntax:: The syntax table controls how words and expressions
- are parsed.
-* Init File:: How to write common customizations in the `.emacs'
- file.
-* Audible Bell:: Changing how Emacs sounds the bell.
-* Faces:: Changing the fonts and colors of a region of text.
-* X Resources:: X resources controlling various aspects of the
- behavior of XEmacs.
+* Calendar Customizing:: Defaults you can set.
+* Holiday Customizing:: Defining your own holidays.
+* Date Display Format:: Changing the format.
+* Time Display Format:: Changing the format.
+* Daylight Savings:: Changing the default.
+* Diary Customizing:: Defaults you can set.
+* Hebrew/Islamic Entries:: How to obtain them.
+* Fancy Diary Display:: Enhancing the diary display, sorting entries.
+* Included Diary Files:: Sharing a common diary file.
+* Sexp Diary Entries:: Fancy things you can do.
+* Appt Customizing:: Customizing appointment reminders.
\1f
-File: xemacs.info, Node: Minor Modes, Next: Variables, Up: Customization
-
-Minor Modes
-===========
-
- Minor modes are options which you can use or not. For example, Auto
-Fill mode is a minor mode in which <SPC> breaks lines between words as
-you type. All the minor modes are independent of each other and of the
-selected major mode. Most minor modes inform you in the mode line when
-they are on; for example, `Fill' in the mode line means that Auto Fill
-mode is on.
-
- Append `-mode' to the name of a minor mode to get the name of a
-command function that turns the mode on or off. Thus, the command to
-enable or disable Auto Fill mode is called `M-x auto-fill-mode'. These
-commands are usually invoked with `M-x', but you can bind keys to them
-if you wish. With no argument, the function turns the mode on if it was
-off and off if it was on. This is known as "toggling". A positive
-argument always turns the mode on, and an explicit zero argument or a
-negative argument always turns it off.
-
- Auto Fill mode allows you to enter filled text without breaking lines
-explicitly. Emacs inserts newlines as necessary to prevent lines from
-becoming too long. *Note Filling::.
-
- Overwrite mode causes ordinary printing characters to replace
-existing text instead of moving it to the right. For example, if point
-is in front of the `B' in `FOOBAR', and you type a `G' in Overwrite
-mode, it changes to `FOOGAR', instead of `FOOGBAR'.
-
- Abbrev mode allows you to define abbreviations that automatically
-expand as you type them. For example, `amd' might expand to `abbrev
-mode'. *Note Abbrevs::, for full information.
+File: xemacs.info, Node: Calendar Customizing, Next: Holiday Customizing, Up: Calendar Customization
+
+Customizing the Calendar
+........................
+
+ If you set the variable `view-diary-entries-initially' to `t',
+calling up the calendar automatically displays the diary entries for
+the current date as well. The diary dates appear only if the current
+date is visible. If you add both of the following lines to your init
+file:
+
+ (setq view-diary-entries-initially t)
+ (calendar)
+
+this displays both the calendar and diary windows whenever you start
+Emacs. *Note Init File::.
+
+ Similarly, if you set the variable
+`view-calendar-holidays-initially' to `t', entering the calendar
+automatically displays a list of holidays for the current three-month
+period. The holiday list appears in a separate window.
+
+ You can set the variable `mark-diary-entries-in-calendar' to `t' in
+order to mark any dates with diary entries. This takes effect whenever
+the calendar window contents are recomputed. There are two ways of
+marking these dates: by changing the face (*note Faces::), if the
+display supports that, or by placing a plus sign (`+') beside the date
+otherwise.
+
+ Similarly, setting the variable `mark-holidays-in-calendar' to `t'
+marks holiday dates, either with a change of face or with an asterisk
+(`*').
+
+ The variable `calendar-holiday-marker' specifies how to mark a date
+as being a holiday. Its value may be a character to insert next to the
+date, or a face name to use for displaying the date. Likewise, the
+variable `diary-entry-marker' specifies how to mark a date that has
+diary entries. The calendar creates faces named `holiday-face' and
+`diary-face' for these purposes; those symbols are the default values
+of these variables, when Emacs supports multiple faces on your terminal.
+
+ The variable `calendar-load-hook' is a normal hook run when the
+calendar package is first loaded (before actually starting to display
+the calendar).
+
+ Starting the calendar runs the normal hook
+`initial-calendar-window-hook'. Recomputation of the calendar display
+does not run this hook. But if you leave the calendar with the `q'
+command and reenter it, the hook runs again.
+
+ The variable `today-visible-calendar-hook' is a normal hook run
+after the calendar buffer has been prepared with the calendar when the
+current date is visible in the window. One use of this hook is to
+replace today's date with asterisks; to do that, use the hook function
+`calendar-star-date'.
+
+ (add-hook 'today-visible-calendar-hook 'calendar-star-date)
+
+Another standard hook function marks the current date, either by
+changing its face or by adding an asterisk. Here's how to use it:
+
+ (add-hook 'today-visible-calendar-hook 'calendar-mark-today)
+
+The variable `calendar-today-marker' specifies how to mark today's
+date. Its value should be a character to insert next to the date or a
+face name to use for displaying the date. A face named
+`calendar-today-face' is provided for this purpose; that symbol is the
+default for this variable when Emacs supports multiple faces on your
+terminal.
+
+A similar normal hook, `today-invisible-calendar-hook' is run if the
+current date is _not_ visible in the window.
\1f
-File: xemacs.info, Node: Variables, Next: Keyboard Macros, Prev: Minor Modes, Up: Customization
-
-Variables
-=========
-
- A "variable" is a Lisp symbol which has a value. Variable names can
-contain any characters, but by convention they are words separated by
-hyphens. A variable can also have a documentation string, which
-describes what kind of value it should have and how the value will be
-used.
-
- Lisp allows any variable to have any kind of value, but most
-variables that Emacs uses require a value of a certain type. Often the
-value has to be a string or a number. Sometimes we say that a certain
-feature is turned on if a variable is "non-`nil'," meaning that if the
-variable's value is `nil', the feature is off, but the feature is on
-for any other value. The conventional value to turn on the
-feature--since you have to pick one particular value when you set the
-variable--is `t'.
-
- Emacs uses many Lisp variables for internal recordkeeping, as any
-Lisp program must, but the most interesting variables for you are the
-ones that exist for the sake of customization. Emacs does not
-(usually) change the values of these variables; instead, you set the
-values, and thereby alter and control the behavior of certain Emacs
-commands. These variables are called "options". Most options are
-documented in this manual and appear in the Variable Index (*note
-Variable Index::.).
-
- One example of a variable which is an option is `fill-column', which
-specifies the position of the right margin (as a number of characters
-from the left margin) to be used by the fill commands (*note
-Filling::.).
-
-* Menu:
-
-* Examining:: Examining or setting one variable's value.
-* Easy Customization:: Convenient and easy customization of variables.
-* Edit Options:: Examining or editing list of all variables' values.
-* Locals:: Per-buffer values of variables.
-* File Variables:: How files can specify variable values.
+File: xemacs.info, Node: Holiday Customizing, Next: Date Display Format, Prev: Calendar Customizing, Up: Calendar Customization
+
+Customizing the Holidays
+........................
+
+ Emacs knows about holidays defined by entries on one of several
+lists. You can customize these lists of holidays to your own needs,
+adding or deleting holidays. The lists of holidays that Emacs uses are
+for general holidays (`general-holidays'), local holidays
+(`local-holidays'), Christian holidays (`christian-holidays'), Hebrew
+(Jewish) holidays (`hebrew-holidays'), Islamic (Moslem) holidays
+(`islamic-holidays'), and other holidays (`other-holidays').
+
+ The general holidays are, by default, holidays common throughout the
+United States. To eliminate these holidays, set `general-holidays' to
+`nil'.
+
+ There are no default local holidays (but sites may supply some). You
+can set the variable `local-holidays' to any list of holidays, as
+described below.
+
+ By default, Emacs does not include all the holidays of the religions
+that it knows, only those commonly found in secular calendars. For a
+more extensive collection of religious holidays, you can set any (or
+all) of the variables `all-christian-calendar-holidays',
+`all-hebrew-calendar-holidays', or `all-islamic-calendar-holidays' to
+`t'. If you want to eliminate the religious holidays, set any or all
+of the corresponding variables `christian-holidays', `hebrew-holidays',
+and `islamic-holidays' to `nil'.
+
+ You can set the variable `other-holidays' to any list of holidays.
+This list, normally empty, is intended for individual use.
+
+ Each of the lists (`general-holidays', `local-holidays',
+`christian-holidays', `hebrew-holidays', `islamic-holidays', and
+`other-holidays') is a list of "holiday forms", each holiday form
+describing a holiday (or sometimes a list of holidays).
+
+ Here is a table of the possible kinds of holiday form. Day numbers
+and month numbers count starting from 1, but "dayname" numbers count
+Sunday as 0. The element STRING is always the name of the holiday, as
+a string.
+
+`(holiday-fixed MONTH DAY STRING)'
+ A fixed date on the Gregorian calendar. MONTH and DAY are
+ numbers, STRING is the name of the holiday.
+
+`(holiday-float MONTH DAYNAME K STRING)'
+ The Kth DAYNAME in MONTH on the Gregorian calendar (DAYNAME=0 for
+ Sunday, and so on); negative K means count back from the end of
+ the month. STRING is the name of the holiday.
+
+`(holiday-hebrew MONTH DAY STRING)'
+ A fixed date on the Hebrew calendar. MONTH and DAY are numbers,
+ STRING is the name of the holiday.
+
+`(holiday-islamic MONTH DAY STRING)'
+ A fixed date on the Islamic calendar. MONTH and DAY are numbers,
+ STRING is the name of the holiday.
+
+`(holiday-julian MONTH DAY STRING)'
+ A fixed date on the Julian calendar. MONTH and DAY are numbers,
+ STRING is the name of the holiday.
+
+`(holiday-sexp SEXP STRING)'
+ A date calculated by the Lisp expression SEXP. The expression
+ should use the variable `year' to compute and return the date of a
+ holiday, or `nil' if the holiday doesn't happen this year. The
+ value of SEXP must represent the date as a list of the form
+ `(MONTH DAY YEAR)'. STRING is the name of the holiday.
+
+`(if CONDITION HOLIDAY-FORM &optional HOLIDAY-FORM)'
+ A holiday that happens only if CONDITION is true.
+
+`(FUNCTION [ARGS])'
+ A list of dates calculated by the function FUNCTION, called with
+ arguments ARGS.
+
+ For example, suppose you want to add Bastille Day, celebrated in
+France on July 14. You can do this by adding the following line to
+your init file:
+
+ (setq other-holidays '((holiday-fixed 7 14 "Bastille Day")))
+
+ *Note Init File::.
+
+The holiday form `(holiday-fixed 7 14 "Bastille Day")' specifies the
+fourteenth day of the seventh month (July).
+
+ Many holidays occur on a specific day of the week, at a specific time
+of month. Here is a holiday form describing Hurricane Supplication Day,
+celebrated in the Virgin Islands on the fourth Monday in August:
+
+ (holiday-float 8 1 4 "Hurricane Supplication Day")
+
+Here the 8 specifies August, the 1 specifies Monday (Sunday is 0,
+Tuesday is 2, and so on), and the 4 specifies the fourth occurrence in
+the month (1 specifies the first occurrence, 2 the second occurrence,
+-1 the last occurrence, -2 the second-to-last occurrence, and so on).
+
+ You can specify holidays that occur on fixed days of the Hebrew,
+Islamic, and Julian calendars too. For example,
+
+ (setq other-holidays
+ '((holiday-hebrew 10 2 "Last day of Hanukkah")
+ (holiday-islamic 3 12 "Mohammed's Birthday")
+ (holiday-julian 4 2 "Jefferson's Birthday")))
+
+adds the last day of Hanukkah (since the Hebrew months are numbered with
+1 starting from Nisan), the Islamic feast celebrating Mohammed's
+birthday (since the Islamic months are numbered from 1 starting with
+Muharram), and Thomas Jefferson's birthday, which is 2 April 1743 on the
+Julian calendar.
+
+ To include a holiday conditionally, use either Emacs Lisp's `if' or
+the `holiday-sexp' form. For example, American presidential elections
+occur on the first Tuesday after the first Monday in November of years
+divisible by 4:
+
+ (holiday-sexp (if (= 0 (% year 4))
+ (calendar-gregorian-from-absolute
+ (1+ (calendar-dayname-on-or-before
+ 1 (+ 6 (calendar-absolute-from-gregorian
+ (list 11 1 year))))))
+ "US Presidential Election"))
+
+or
+
+ (if (= 0 (% displayed-year 4))
+ (fixed 11
+ (extract-calendar-day
+ (calendar-gregorian-from-absolute
+ (1+ (calendar-dayname-on-or-before
+ 1 (+ 6 (calendar-absolute-from-gregorian
+ (list 11 1 displayed-year)))))))
+ "US Presidential Election"))
+
+ Some holidays just don't fit into any of these forms because special
+calculations are involved in their determination. In such cases you
+must write a Lisp function to do the calculation. To include eclipses,
+for example, add `(eclipses)' to `other-holidays' and write an Emacs
+Lisp function `eclipses' that returns a (possibly empty) list of the
+relevant Gregorian dates among the range visible in the calendar
+window, with descriptive strings, like this:
+
+ (((6 27 1991) "Lunar Eclipse") ((7 11 1991) "Solar Eclipse") ... )
\1f
-File: xemacs.info, Node: Examining, Next: Easy Customization, Up: Variables
-
-Examining and Setting Variables
--------------------------------
+File: xemacs.info, Node: Date Display Format, Next: Time Display Format, Prev: Holiday Customizing, Up: Calendar Customization
-`C-h v'
-`M-x describe-variable'
- Print the value and documentation of a variable.
+Date Display Format
+...................
-`M-x set-variable'
- Change the value of a variable.
+ You can customize the manner of displaying dates in the diary, in
+mode lines, and in messages by setting `calendar-date-display-form'.
+This variable holds a list of expressions that can involve the variables
+`month', `day', and `year', which are all numbers in string form, and
+`monthname' and `dayname', which are both alphabetic strings. In the
+American style, the default value of this list is as follows:
- To examine the value of a single variable, use `C-h v'
-(`describe-variable'), which reads a variable name using the
-minibuffer, with completion. It prints both the value and the
-documentation of the variable.
+ ((if dayname (concat dayname ", ")) monthname " " day ", " year)
- C-h v fill-column <RET>
+while in the European style this value is the default:
-prints something like:
+ ((if dayname (concat dayname ", ")) day " " monthname " " year)
- fill-column's value is 75
-
- Documentation:
- *Column beyond which automatic line-wrapping should happen.
- Automatically becomes local when set in any fashion.
+ + The ISO standard date representation is this:
-The star at the beginning of the documentation indicates that this
-variable is an option. `C-h v' is not restricted to options; it allows
-any variable name.
+ (year "-" month "-" day)
- If you know which option you want to set, you can use `M-x
-set-variable' to set it. This prompts for the variable name in the
-minibuffer (with completion), and then prompts for a Lisp expression
-for the new value using the minibuffer a second time. For example,
+This specifies a typical American format:
- M-x set-variable <RET> fill-column <RET> 75 <RET>
+ (month "/" day "/" (substring year -2))
-sets `fill-column' to 75, as if you had executed the Lisp expression
-`(setq fill-column 75)'.
+\1f
+File: xemacs.info, Node: Time Display Format, Next: Daylight Savings, Prev: Date Display Format, Up: Calendar Customization
- Setting variables in this way, like all means of customizing Emacs
-except where explicitly stated, affects only the current Emacs session.
+Time Display Format
+...................
-\1f
-File: xemacs.info, Node: Easy Customization, Next: Edit Options, Prev: Examining, Up: Variables
+ The calendar and diary by default display times of day in the
+conventional American style with the hours from 1 through 12, minutes,
+and either `am' or `pm'. If you prefer the European style, also known
+in the US as military, in which the hours go from 00 to 23, you can
+alter the variable `calendar-time-display-form'. This variable is a
+list of expressions that can involve the variables `12-hours',
+`24-hours', and `minutes', which are all numbers in string form, and
+`am-pm' and `time-zone', which are both alphabetic strings. The
+default value of `calendar-time-display-form' is as follows:
-Easy Customization Interface
-----------------------------
+ (12-hours ":" minutes am-pm
+ (if time-zone " (") time-zone (if time-zone ")"))
- A convenient way to find the user option variables that you want to
-change, and then change them, is with `M-x customize'. This command
-creates a "customization buffer" with which you can browse through the
-Emacs user options in a logically organized structure, then edit and
-set their values. You can also use the customization buffer to save
-settings permanently. (Not all Emacs user options are included in this
-structure as of yet, but we are adding the rest.)
+Here is a value that provides European style times:
-* Menu:
+ (24-hours ":" minutes
+ (if time-zone " (") time-zone (if time-zone ")"))
-* Groups: Customization Groups.
- How options are classified in a structure.
-* Changing an Option:: How to edit a value and set an option.
-* Face Customization:: How to edit the attributes of a face.
-* Specific Customization:: Making a customization buffer for specific
- options, faces, or groups.
+gives military-style times like `21:07 (UT)' if time zone names are
+defined, and times like `21:07' if they are not.
\1f
-File: xemacs.info, Node: Customization Groups, Next: Changing an Option, Up: Easy Customization
-
-Customization Groups
-....................
-
- For customization purposes, user options are organized into "groups"
-to help you find them. Groups are collected into bigger groups, all
-the way up to a master group called `Emacs'.
-
- `M-x customize' creates a customization buffer that shows the
-top-level `Emacs' group and the second-level groups immediately under
-it. It looks like this, in part:
-
- /- Emacs group: ---------------------------------------------------\
- [State]: visible group members are all at standard settings.
- Customization of the One True Editor.
- See also [Manual].
-
- [Open] Editing group
- Basic text editing facilities.
-
- [Open] External group
- Interfacing to external utilities.
-
- MORE SECOND-LEVEL GROUPS
-
- \- Emacs group end ------------------------------------------------/
-
-This says that the buffer displays the contents of the `Emacs' group.
-The other groups are listed because they are its contents. But they
-are listed differently, without indentation and dashes, because *their*
-contents are not included. Each group has a single-line documentation
-string; the `Emacs' group also has a `[State]' line.
-
- Most of the text in the customization buffer is read-only, but it
-typically includes some "editable fields" that you can edit. There are
-also "active fields"; this means a field that does something when you
-"invoke" it. To invoke an active field, either click on it with
-`Mouse-1', or move point to it and type <RET>.
-
- For example, the phrase `[Open]' that appears in a second-level
-group is an active field. Invoking the `[Open]' field for a group
-opens up a new customization buffer, which shows that group and its
-contents. This field is a kind of hypertext link to another group.
-
- The `Emacs' group does not include any user options itself, but
-other groups do. By examining various groups, you will eventually find
-the options and faces that belong to the feature you are interested in
-customizing. Then you can use the customization buffer to set them.
-
- You can view the structure of customization groups on a larger scale
-with `M-x customize-browse'. This command creates a special kind of
-customization buffer which shows only the names of the groups (and
-options and faces), and their structure.
-
- In this buffer, you can show the contents of a group by invoking
-`[+]'. When the group contents are visible, this button changes to
-`[-]'; invoking that hides the group contents.
-
- Each group, option or face name in this buffer has an active field
-which says `[Group]', `[Option]' or `[Face]'. Invoking that active
-field creates an ordinary customization buffer showing just that group
-and its contents, just that option, or just that face. This is the way
-to set values in it.
+File: xemacs.info, Node: Daylight Savings, Next: Diary Customizing, Prev: Time Display Format, Up: Calendar Customization
+
+Daylight Savings Time
+.....................
+
+ Emacs understands the difference between standard time and daylight
+savings time--the times given for sunrise, sunset, solstices,
+equinoxes, and the phases of the moon take that into account. The rules
+for daylight savings time vary from place to place and have also varied
+historically from year to year. To do the job properly, Emacs needs to
+know which rules to use.
+
+ Some operating systems keep track of the rules that apply to the
+place where you are; on these systems, Emacs gets the information it
+needs from the system automatically. If some or all of this
+information is missing, Emacs fills in the gaps with the rules
+currently used in Cambridge, Massachusetts. If the resulting rules are
+not what you want, you can tell Emacs the rules to use by setting
+certain variables.
+
+ If the default choice of rules is not appropriate for your location,
+you can tell Emacs the rules to use by setting the variables
+`calendar-daylight-savings-starts' and
+`calendar-daylight-savings-ends'. Their values should be Lisp
+expressions that refer to the variable `year', and evaluate to the
+Gregorian date on which daylight savings time starts or (respectively)
+ends, in the form of a list `(MONTH DAY YEAR)'. The values should be
+`nil' if your area does not use daylight savings time.
+
+ Emacs uses these expressions to determine the starting date of
+daylight savings time for the holiday list and for correcting times of
+day in the solar and lunar calculations.
+
+ The values for Cambridge, Massachusetts are as follows:
+
+ (calendar-nth-named-day 1 0 4 year)
+ (calendar-nth-named-day -1 0 10 year)
+
+That is, the first 0th day (Sunday) of the fourth month (April) in the
+year specified by `year', and the last Sunday of the tenth month
+(October) of that year. If daylight savings time were changed to start
+on October 1, you would set `calendar-daylight-savings-starts' to this:
+
+ (list 10 1 year)
+
+ For a more complex example, suppose daylight savings time begins on
+the first of Nisan on the Hebrew calendar. You should set
+`calendar-daylight-savings-starts' to this value:
+
+ (calendar-gregorian-from-absolute
+ (calendar-absolute-from-hebrew
+ (list 1 1 (+ year 3760))))
+
+because Nisan is the first month in the Hebrew calendar and the Hebrew
+year differs from the Gregorian year by 3760 at Nisan.
+
+ If there is no daylight savings time at your location, or if you want
+all times in standard time, set `calendar-daylight-savings-starts' and
+`calendar-daylight-savings-ends' to `nil'.
+
+ The variable `calendar-daylight-time-offset' specifies the
+difference between daylight savings time and standard time, measured in
+minutes. The value for Cambridge, Massachusetts is 60.
+
+ The two variables `calendar-daylight-savings-starts-time' and
+`calendar-daylight-savings-ends-time' specify the number of minutes
+after midnight local time when the transition to and from daylight
+savings time should occur. For Cambridge, Massachusetts both variables'
+values are 120.