-This is Info file ../info/xemacs.info, produced by Makeinfo version
-1.68 from the input file xemacs/xemacs.texi.
+This is ../info/xemacs.info, produced by makeinfo version 4.0 from
+xemacs/xemacs.texi.
INFO-DIR-SECTION XEmacs Editor
START-INFO-DIR-ENTRY
translation approved by the author instead of in the original English.
\1f
+File: xemacs.info, Node: Adding to Diary, Next: Special Diary Entries, Prev: Date Formats, Up: Diary
+
+Commands to Add to the Diary
+----------------------------
+
+ While in the calendar, there are several commands to create diary
+entries:
+
+`i d'
+ Add a diary entry for the selected date (`insert-diary-entry').
+
+`i w'
+ Add a diary entry for the selected day of the week
+ (`insert-weekly-diary-entry').
+
+`i m'
+ Add a diary entry for the selected day of the month
+ (`insert-monthly-diary-entry').
+
+`i y'
+ Add a diary entry for the selected day of the year
+ (`insert-yearly-diary-entry').
+
+ You can make a diary entry for a specific date by selecting that date
+in the calendar window and typing the `i d' command. This command
+displays the end of your diary file in another window and inserts the
+date; you can then type the rest of the diary entry.
+
+ If you want to make a diary entry that applies to a specific day of
+the week, select that day of the week (any occurrence will do) and type
+`i w'. This inserts the day-of-week as a generic date; you can then
+type the rest of the diary entry. You can make a monthly diary entry in
+the same fashion. Select the day of the month, use the `i m' command,
+and type rest of the entry. Similarly, you can insert a yearly diary
+entry with the `i y' command.
+
+ All of the above commands make marking diary entries by default. To
+make a nonmarking diary entry, give a numeric argument to the command.
+For example, `C-u i w' makes a nonmarking weekly diary entry.
+
+ When you modify the diary file, be sure to save the file before
+exiting Emacs.
+
+\1f
+File: xemacs.info, Node: Special Diary Entries, Prev: Adding to Diary, Up: Diary
+
+Special Diary Entries
+---------------------
+
+ In addition to entries based on calendar dates, the diary file can
+contain "sexp entries" for regular events such as anniversaries. These
+entries are based on Lisp expressions (sexps) that Emacs evaluates as
+it scans the diary file. Instead of a date, a sexp entry contains `%%'
+followed by a Lisp expression which must begin and end with
+parentheses. The Lisp expression determines which dates the entry
+applies to.
+
+ Calendar mode provides commands to insert certain commonly used sexp
+entries:
+
+`i a'
+ Add an anniversary diary entry for the selected date
+ (`insert-anniversary-diary-entry').
+
+`i b'
+ Add a block diary entry for the current region
+ (`insert-block-diary-entry').
+
+`i c'
+ Add a cyclic diary entry starting at the date
+ (`insert-cyclic-diary-entry').
+
+ If you want to make a diary entry that applies to the anniversary of
+a specific date, move point to that date and use the `i a' command.
+This displays the end of your diary file in another window and inserts
+the anniversary description; you can then type the rest of the diary
+entry. The entry looks like this:
+
+ The effect of `i a' is to add a `diary-anniversary' sexp to your
+diary file. You can also add one manually, for instance:
+
+ %%(diary-anniversary 10 31 1948) Arthur's birthday
+
+This entry applies to October 31 in any year after 1948; `10 31 1948'
+specifies the date. (If you are using the European calendar style, the
+month and day are interchanged.) The reason this expression requires a
+beginning year is that advanced diary functions can use it to calculate
+the number of elapsed years.
+
+ A "block" diary entry applies to a specified range of consecutive
+dates. Here is a block diary entry that applies to all dates from June
+24, 1990 through July 10, 1990:
+
+ %%(diary-block 6 24 1990 7 10 1990) Vacation
+
+The `6 24 1990' indicates the starting date and the `7 10 1990'
+indicates the stopping date. (Again, if you are using the European
+calendar style, the month and day are interchanged.)
+
+ To insert a block entry, place point and the mark on the two dates
+that begin and end the range, and type `i b'. This command displays
+the end of your diary file in another window and inserts the block
+description; you can then type the diary entry.
+
+ "Cyclic" diary entries repeat after a fixed interval of days. To
+create one, select the starting date and use the `i c' command. The
+command prompts for the length of interval, then inserts the entry,
+which looks like this:
+
+ %%(diary-cyclic 50 3 1 1990) Renew medication
+
+This entry applies to March 1, 1990 and every 50th day following; `3 1
+1990' specifies the starting date. (If you are using the European
+calendar style, the month and day are interchanged.)
+
+ All three of these commands make marking diary entries. To insert a
+nonmarking entry, give a numeric argument to the command. For example,
+`C-u i a' makes a nonmarking anniversary diary entry.
+
+ Marking sexp diary entries in the calendar is _extremely_
+time-consuming, since every date visible in the calendar window must be
+individually checked. So it's a good idea to make sexp diary entries
+nonmarking (with `&') when possible.
+
+ Another sophisticated kind of sexp entry, a "floating" diary entry,
+specifies a regularly occurring event by offsets specified in days,
+weeks, and months. It is comparable to a crontab entry interpreted by
+the `cron' utility. Here is a nonmarking, floating diary entry that
+applies to the last Thursday in November:
+
+ &%%(diary-float 11 4 -1) American Thanksgiving
+
+The 11 specifies November (the eleventh month), the 4 specifies Thursday
+(the fourth day of the week, where Sunday is numbered zero), and the -1
+specifies "last" (1 would mean "first", 2 would mean "second", -2 would
+mean "second-to-last", and so on). The month can be a single month or
+a list of months. Thus you could change the 11 above to `'(1 2 3)' and
+have the entry apply to the last Thursday of January, February, and
+March. If the month is `t', the entry applies to all months of the
+year.
+
+ The sexp feature of the diary allows you to specify diary entries
+based on any Emacs Lisp expression. You can use the library of built-in
+functions or you can write your own functions. The built-in functions
+include the ones shown in this section, plus a few others (*note Sexp
+Diary Entries::).
+
+ The generality of sexps lets you specify any diary entry that you can
+describe algorithmically. Suppose you get paid on the 21st of the month
+if it is a weekday, and to the Friday before if the 21st is on a
+weekend. The diary entry
+
+ &%%(let ((dayname (calendar-day-of-week date))
+ (day (car (cdr date))))
+ (or (and (= day 21) (memq dayname '(1 2 3 4 5)))
+ (and (memq day '(19 20)) (= dayname 5)))
+ ) Pay check deposited
+
+to just those dates. This example illustrates how the sexp can depend
+on the variable `date'; this variable is a list (MONTH DAY YEAR) that
+gives the Gregorian date for which the diary entries are being found.
+If the value of the sexp is `t', the entry applies to that date. If
+the sexp evaluates to `nil', the entry does _not_ apply to that date.
+
+\1f
+File: xemacs.info, Node: Calendar Customization, Prev: Diary, Up: Calendar/Diary
+
+Customizing the Calendar and Diary
+----------------------------------
+
+ There are many customizations that you can use to make the calendar
+and diary suit your personal tastes.
+
+* Menu:
+
+* Calendar Customizing:: Defaults you can set.
+* Holiday Customizing:: Defining your own holidays.
+* Date Display Format:: Changing the format.
+* Time Display Format:: Changing the format.
+* Daylight Savings:: Changing the default.
+* Diary Customizing:: Defaults you can set.
+* Hebrew/Islamic Entries:: How to obtain them.
+* Fancy Diary Display:: Enhancing the diary display, sorting entries.
+* Included Diary Files:: Sharing a common diary file.
+* Sexp Diary Entries:: Fancy things you can do.
+* Appt Customizing:: Customizing appointment reminders.
+
+\1f
+File: xemacs.info, Node: Calendar Customizing, Next: Holiday Customizing, Up: Calendar Customization
+
+Customizing the Calendar
+........................
+
+ If you set the variable `view-diary-entries-initially' to `t',
+calling up the calendar automatically displays the diary entries for
+the current date as well. The diary dates appear only if the current
+date is visible. If you add both of the following lines to your init
+file:
+
+ (setq view-diary-entries-initially t)
+ (calendar)
+
+this displays both the calendar and diary windows whenever you start
+Emacs. *Note Init File::.
+
+ Similarly, if you set the variable
+`view-calendar-holidays-initially' to `t', entering the calendar
+automatically displays a list of holidays for the current three-month
+period. The holiday list appears in a separate window.
+
+ You can set the variable `mark-diary-entries-in-calendar' to `t' in
+order to mark any dates with diary entries. This takes effect whenever
+the calendar window contents are recomputed. There are two ways of
+marking these dates: by changing the face (*note Faces::), if the
+display supports that, or by placing a plus sign (`+') beside the date
+otherwise.
+
+ Similarly, setting the variable `mark-holidays-in-calendar' to `t'
+marks holiday dates, either with a change of face or with an asterisk
+(`*').
+
+ The variable `calendar-holiday-marker' specifies how to mark a date
+as being a holiday. Its value may be a character to insert next to the
+date, or a face name to use for displaying the date. Likewise, the
+variable `diary-entry-marker' specifies how to mark a date that has
+diary entries. The calendar creates faces named `holiday-face' and
+`diary-face' for these purposes; those symbols are the default values
+of these variables, when Emacs supports multiple faces on your terminal.
+
+ The variable `calendar-load-hook' is a normal hook run when the
+calendar package is first loaded (before actually starting to display
+the calendar).
+
+ Starting the calendar runs the normal hook
+`initial-calendar-window-hook'. Recomputation of the calendar display
+does not run this hook. But if you leave the calendar with the `q'
+command and reenter it, the hook runs again.
+
+ The variable `today-visible-calendar-hook' is a normal hook run
+after the calendar buffer has been prepared with the calendar when the
+current date is visible in the window. One use of this hook is to
+replace today's date with asterisks; to do that, use the hook function
+`calendar-star-date'.
+
+ (add-hook 'today-visible-calendar-hook 'calendar-star-date)
+
+Another standard hook function marks the current date, either by
+changing its face or by adding an asterisk. Here's how to use it:
+
+ (add-hook 'today-visible-calendar-hook 'calendar-mark-today)
+
+The variable `calendar-today-marker' specifies how to mark today's
+date. Its value should be a character to insert next to the date or a
+face name to use for displaying the date. A face named
+`calendar-today-face' is provided for this purpose; that symbol is the
+default for this variable when Emacs supports multiple faces on your
+terminal.
+
+A similar normal hook, `today-invisible-calendar-hook' is run if the
+current date is _not_ visible in the window.
+
+\1f
+File: xemacs.info, Node: Holiday Customizing, Next: Date Display Format, Prev: Calendar Customizing, Up: Calendar Customization
+
+Customizing the Holidays
+........................
+
+ Emacs knows about holidays defined by entries on one of several
+lists. You can customize these lists of holidays to your own needs,
+adding or deleting holidays. The lists of holidays that Emacs uses are
+for general holidays (`general-holidays'), local holidays
+(`local-holidays'), Christian holidays (`christian-holidays'), Hebrew
+(Jewish) holidays (`hebrew-holidays'), Islamic (Moslem) holidays
+(`islamic-holidays'), and other holidays (`other-holidays').
+
+ The general holidays are, by default, holidays common throughout the
+United States. To eliminate these holidays, set `general-holidays' to
+`nil'.
+
+ There are no default local holidays (but sites may supply some). You
+can set the variable `local-holidays' to any list of holidays, as
+described below.
+
+ By default, Emacs does not include all the holidays of the religions
+that it knows, only those commonly found in secular calendars. For a
+more extensive collection of religious holidays, you can set any (or
+all) of the variables `all-christian-calendar-holidays',
+`all-hebrew-calendar-holidays', or `all-islamic-calendar-holidays' to
+`t'. If you want to eliminate the religious holidays, set any or all
+of the corresponding variables `christian-holidays', `hebrew-holidays',
+and `islamic-holidays' to `nil'.
+
+ You can set the variable `other-holidays' to any list of holidays.
+This list, normally empty, is intended for individual use.
+
+ Each of the lists (`general-holidays', `local-holidays',
+`christian-holidays', `hebrew-holidays', `islamic-holidays', and
+`other-holidays') is a list of "holiday forms", each holiday form
+describing a holiday (or sometimes a list of holidays).
+
+ Here is a table of the possible kinds of holiday form. Day numbers
+and month numbers count starting from 1, but "dayname" numbers count
+Sunday as 0. The element STRING is always the name of the holiday, as
+a string.
+
+`(holiday-fixed MONTH DAY STRING)'
+ A fixed date on the Gregorian calendar. MONTH and DAY are
+ numbers, STRING is the name of the holiday.
+
+`(holiday-float MONTH DAYNAME K STRING)'
+ The Kth DAYNAME in MONTH on the Gregorian calendar (DAYNAME=0 for
+ Sunday, and so on); negative K means count back from the end of
+ the month. STRING is the name of the holiday.
+
+`(holiday-hebrew MONTH DAY STRING)'
+ A fixed date on the Hebrew calendar. MONTH and DAY are numbers,
+ STRING is the name of the holiday.
+
+`(holiday-islamic MONTH DAY STRING)'
+ A fixed date on the Islamic calendar. MONTH and DAY are numbers,
+ STRING is the name of the holiday.
+
+`(holiday-julian MONTH DAY STRING)'
+ A fixed date on the Julian calendar. MONTH and DAY are numbers,
+ STRING is the name of the holiday.
+
+`(holiday-sexp SEXP STRING)'
+ A date calculated by the Lisp expression SEXP. The expression
+ should use the variable `year' to compute and return the date of a
+ holiday, or `nil' if the holiday doesn't happen this year. The
+ value of SEXP must represent the date as a list of the form
+ `(MONTH DAY YEAR)'. STRING is the name of the holiday.
+
+`(if CONDITION HOLIDAY-FORM &optional HOLIDAY-FORM)'
+ A holiday that happens only if CONDITION is true.
+
+`(FUNCTION [ARGS])'
+ A list of dates calculated by the function FUNCTION, called with
+ arguments ARGS.
+
+ For example, suppose you want to add Bastille Day, celebrated in
+France on July 14. You can do this by adding the following line to
+your init file:
+
+ (setq other-holidays '((holiday-fixed 7 14 "Bastille Day")))
+
+ *Note Init File::.
+
+The holiday form `(holiday-fixed 7 14 "Bastille Day")' specifies the
+fourteenth day of the seventh month (July).
+
+ Many holidays occur on a specific day of the week, at a specific time
+of month. Here is a holiday form describing Hurricane Supplication Day,
+celebrated in the Virgin Islands on the fourth Monday in August:
+
+ (holiday-float 8 1 4 "Hurricane Supplication Day")
+
+Here the 8 specifies August, the 1 specifies Monday (Sunday is 0,
+Tuesday is 2, and so on), and the 4 specifies the fourth occurrence in
+the month (1 specifies the first occurrence, 2 the second occurrence,
+-1 the last occurrence, -2 the second-to-last occurrence, and so on).
+
+ You can specify holidays that occur on fixed days of the Hebrew,
+Islamic, and Julian calendars too. For example,
+
+ (setq other-holidays
+ '((holiday-hebrew 10 2 "Last day of Hanukkah")
+ (holiday-islamic 3 12 "Mohammed's Birthday")
+ (holiday-julian 4 2 "Jefferson's Birthday")))
+
+adds the last day of Hanukkah (since the Hebrew months are numbered with
+1 starting from Nisan), the Islamic feast celebrating Mohammed's
+birthday (since the Islamic months are numbered from 1 starting with
+Muharram), and Thomas Jefferson's birthday, which is 2 April 1743 on the
+Julian calendar.
+
+ To include a holiday conditionally, use either Emacs Lisp's `if' or
+the `holiday-sexp' form. For example, American presidential elections
+occur on the first Tuesday after the first Monday in November of years
+divisible by 4:
+
+ (holiday-sexp (if (= 0 (% year 4))
+ (calendar-gregorian-from-absolute
+ (1+ (calendar-dayname-on-or-before
+ 1 (+ 6 (calendar-absolute-from-gregorian
+ (list 11 1 year))))))
+ "US Presidential Election"))
+
+or
+
+ (if (= 0 (% displayed-year 4))
+ (fixed 11
+ (extract-calendar-day
+ (calendar-gregorian-from-absolute
+ (1+ (calendar-dayname-on-or-before
+ 1 (+ 6 (calendar-absolute-from-gregorian
+ (list 11 1 displayed-year)))))))
+ "US Presidential Election"))
+
+ Some holidays just don't fit into any of these forms because special
+calculations are involved in their determination. In such cases you
+must write a Lisp function to do the calculation. To include eclipses,
+for example, add `(eclipses)' to `other-holidays' and write an Emacs
+Lisp function `eclipses' that returns a (possibly empty) list of the
+relevant Gregorian dates among the range visible in the calendar
+window, with descriptive strings, like this:
+
+ (((6 27 1991) "Lunar Eclipse") ((7 11 1991) "Solar Eclipse") ... )
+
+\1f
+File: xemacs.info, Node: Date Display Format, Next: Time Display Format, Prev: Holiday Customizing, Up: Calendar Customization
+
+Date Display Format
+...................
+
+ You can customize the manner of displaying dates in the diary, in
+mode lines, and in messages by setting `calendar-date-display-form'.
+This variable holds a list of expressions that can involve the variables
+`month', `day', and `year', which are all numbers in string form, and
+`monthname' and `dayname', which are both alphabetic strings. In the
+American style, the default value of this list is as follows:
+
+ ((if dayname (concat dayname ", ")) monthname " " day ", " year)
+
+while in the European style this value is the default:
+
+ ((if dayname (concat dayname ", ")) day " " monthname " " year)
+
+ + The ISO standard date representation is this:
+
+ (year "-" month "-" day)
+
+This specifies a typical American format:
+
+ (month "/" day "/" (substring year -2))
+
+\1f
+File: xemacs.info, Node: Time Display Format, Next: Daylight Savings, Prev: Date Display Format, Up: Calendar Customization
+
+Time Display Format
+...................
+
+ The calendar and diary by default display times of day in the
+conventional American style with the hours from 1 through 12, minutes,
+and either `am' or `pm'. If you prefer the European style, also known
+in the US as military, in which the hours go from 00 to 23, you can
+alter the variable `calendar-time-display-form'. This variable is a
+list of expressions that can involve the variables `12-hours',
+`24-hours', and `minutes', which are all numbers in string form, and
+`am-pm' and `time-zone', which are both alphabetic strings. The
+default value of `calendar-time-display-form' is as follows:
+
+ (12-hours ":" minutes am-pm
+ (if time-zone " (") time-zone (if time-zone ")"))
+
+Here is a value that provides European style times:
+
+ (24-hours ":" minutes
+ (if time-zone " (") time-zone (if time-zone ")"))
+
+gives military-style times like `21:07 (UT)' if time zone names are
+defined, and times like `21:07' if they are not.
+
+\1f
+File: xemacs.info, Node: Daylight Savings, Next: Diary Customizing, Prev: Time Display Format, Up: Calendar Customization
+
+Daylight Savings Time
+.....................
+
+ Emacs understands the difference between standard time and daylight
+savings time--the times given for sunrise, sunset, solstices,
+equinoxes, and the phases of the moon take that into account. The rules
+for daylight savings time vary from place to place and have also varied
+historically from year to year. To do the job properly, Emacs needs to
+know which rules to use.
+
+ Some operating systems keep track of the rules that apply to the
+place where you are; on these systems, Emacs gets the information it
+needs from the system automatically. If some or all of this
+information is missing, Emacs fills in the gaps with the rules
+currently used in Cambridge, Massachusetts. If the resulting rules are
+not what you want, you can tell Emacs the rules to use by setting
+certain variables.
+
+ If the default choice of rules is not appropriate for your location,
+you can tell Emacs the rules to use by setting the variables
+`calendar-daylight-savings-starts' and
+`calendar-daylight-savings-ends'. Their values should be Lisp
+expressions that refer to the variable `year', and evaluate to the
+Gregorian date on which daylight savings time starts or (respectively)
+ends, in the form of a list `(MONTH DAY YEAR)'. The values should be
+`nil' if your area does not use daylight savings time.
+
+ Emacs uses these expressions to determine the starting date of
+daylight savings time for the holiday list and for correcting times of
+day in the solar and lunar calculations.
+
+ The values for Cambridge, Massachusetts are as follows:
+
+ (calendar-nth-named-day 1 0 4 year)
+ (calendar-nth-named-day -1 0 10 year)
+
+That is, the first 0th day (Sunday) of the fourth month (April) in the
+year specified by `year', and the last Sunday of the tenth month
+(October) of that year. If daylight savings time were changed to start
+on October 1, you would set `calendar-daylight-savings-starts' to this:
+
+ (list 10 1 year)
+
+ For a more complex example, suppose daylight savings time begins on
+the first of Nisan on the Hebrew calendar. You should set
+`calendar-daylight-savings-starts' to this value:
+
+ (calendar-gregorian-from-absolute
+ (calendar-absolute-from-hebrew
+ (list 1 1 (+ year 3760))))
+
+because Nisan is the first month in the Hebrew calendar and the Hebrew
+year differs from the Gregorian year by 3760 at Nisan.
+
+ If there is no daylight savings time at your location, or if you want
+all times in standard time, set `calendar-daylight-savings-starts' and
+`calendar-daylight-savings-ends' to `nil'.
+
+ The variable `calendar-daylight-time-offset' specifies the
+difference between daylight savings time and standard time, measured in
+minutes. The value for Cambridge, Massachusetts is 60.
+
+ The two variables `calendar-daylight-savings-starts-time' and
+`calendar-daylight-savings-ends-time' specify the number of minutes
+after midnight local time when the transition to and from daylight
+savings time should occur. For Cambridge, Massachusetts both variables'
+values are 120.
+
+\1f
+File: xemacs.info, Node: Diary Customizing, Next: Hebrew/Islamic Entries, Prev: Daylight Savings, Up: Calendar Customization
+
+Customizing the Diary
+.....................
+
+ Ordinarily, the mode line of the diary buffer window indicates any
+holidays that fall on the date of the diary entries. The process of
+checking for holidays can take several seconds, so including holiday
+information delays the display of the diary buffer noticeably. If you'd
+prefer to have a faster display of the diary buffer but without the
+holiday information, set the variable `holidays-in-diary-buffer' to
+`nil'.
+
+ The variable `number-of-diary-entries' controls the number of days
+of diary entries to be displayed at one time. It affects the initial
+display when `view-diary-entries-initially' is `t', as well as the
+command `M-x diary'. For example, the default value is 1, which says
+to display only the current day's diary entries. If the value is 2,
+both the current day's and the next day's entries are displayed. The
+value can also be a vector of seven elements: for example, if the value
+is `[0 2 2 2 2 4 1]' then no diary entries appear on Sunday, the
+current date's and the next day's diary entries appear Monday through
+Thursday, Friday through Monday's entries appear on Friday, while on
+Saturday only that day's entries appear.
+
+ The variable `print-diary-entries-hook' is a normal hook run after
+preparation of a temporary buffer containing just the diary entries
+currently visible in the diary buffer. (The other, irrelevant diary
+entries are really absent from the temporary buffer; in the diary
+buffer, they are merely hidden.) The default value of this hook does
+the printing with the command `lpr-buffer'. If you want to use a
+different command to do the printing, just change the value of this
+hook. Other uses might include, for example, rearranging the lines into
+order by day and time.
+
+ You can customize the form of dates in your diary file, if neither
+the standard American nor European styles suits your needs, by setting
+the variable `diary-date-forms'. This variable is a list of patterns
+for recognizing a date. Each date pattern is a list whose elements may
+be regular expressions (*note Regexps::) or the symbols `month', `day',
+`year', `monthname', and `dayname'. All these elements serve as
+patterns that match certain kinds of text in the diary file. In order
+for the date pattern, as a whole, to match, all of its elements must
+match consecutively.
+
+ A regular expression in a date pattern matches in its usual fashion,
+using the standard syntax table altered so that `*' is a word
+constituent.
+
+ The symbols `month', `day', `year', `monthname', and `dayname' match
+the month number, day number, year number, month name, and day name of
+the date being considered. The symbols that match numbers allow
+leading zeros; those that match names allow three-letter abbreviations
+and capitalization. All the symbols can match `*'; since `*' in a
+diary entry means "any day", "any month", and so on, it should match
+regardless of the date being considered.
+
+ The default value of `diary-date-forms' in the American style is
+this:
+
+ ((month "/" day "[^/0-9]")
+ (month "/" day "/" year "[^0-9]")
+ (monthname " *" day "[^,0-9]")
+ (monthname " *" day ", *" year "[^0-9]")
+ (dayname "\\W"))
+
+Emacs matches of the diary entries with the date forms is done with the
+standard syntax table from Fundamental mode (*note Syntax Tables:
+(lispref)Syntax Tables.), but with the `*' changed so that it is a word
+constituent.
+
+ The date patterns in the list must be _mutually exclusive_ and must
+not match any portion of the diary entry itself, just the date and one
+character of whitespace. If, to be mutually exclusive, the pattern
+must match a portion of the diary entry text--beyond the whitespace
+that ends the date--then the first element of the date pattern _must_
+be `backup'. This causes the date recognizer to back up to the
+beginning of the current word of the diary entry, after finishing the
+match. Even if you use `backup', the date pattern must absolutely not
+match more than a portion of the first word of the diary entry. The
+default value of `diary-date-forms' in the European style is this list:
+
+ ((day "/" month "[^/0-9]")
+ (day "/" month "/" year "[^0-9]")
+ (backup day " *" monthname "\\W+\\<[^*0-9]")
+ (day " *" monthname " *" year "[^0-9]")
+ (dayname "\\W"))
+
+Notice the use of `backup' in the third pattern, because it needs to
+match part of a word beyond the date itself to distinguish it from the
+fourth pattern.
+
+\1f
+File: xemacs.info, Node: Hebrew/Islamic Entries, Next: Fancy Diary Display, Prev: Diary Customizing, Up: Calendar Customization
+
+Hebrew- and Islamic-Date Diary Entries
+......................................
+
+ Your diary file can have entries based on Hebrew or Islamic dates, as
+well as entries based on the world-standard Gregorian calendar.
+However, because recognition of such entries is time-consuming and most
+people don't use them, you must explicitly enable their use. If you
+want the diary to recognize Hebrew-date diary entries, for example, you
+must do this:
+
+ (add-hook 'nongregorian-diary-listing-hook 'list-hebrew-diary-entries)
+ (add-hook 'nongregorian-diary-marking-hook 'mark-hebrew-diary-entries)
+
+If you want Islamic-date entries, do this:
+
+ (add-hook 'nongregorian-diary-listing-hook 'list-islamic-diary-entries)
+ (add-hook 'nongregorian-diary-marking-hook 'mark-islamic-diary-entries)
+
+ Hebrew- and Islamic-date diary entries have the same formats as
+Gregorian-date diary entries, except that `H' precedes a Hebrew date
+and `I' precedes an Islamic date. Moreover, because the Hebrew and
+Islamic month names are not uniquely specified by the first three
+letters, you may not abbreviate them. For example, a diary entry for
+the Hebrew date Heshvan 25 could look like this:
+
+ HHeshvan 25 Happy Hebrew birthday!
+
+and would appear in the diary for any date that corresponds to Heshvan
+25 on the Hebrew calendar. And here is Islamic-date diary entry that
+matches Dhu al-Qada 25:
+
+ IDhu al-Qada 25 Happy Islamic birthday!
+
+and would appear in the diary for any date that corresponds to Dhu
+al-Qada 25 on the Islamic calendar.
+
+ As with Gregorian-date diary entries, Hebrew- and Islamic-date
+entries are nonmarking if they are preceded with an ampersand (`&').
+
+ Here is a table of commands used in the calendar to create diary
+entries that match the selected date and other dates that are similar
+in the Hebrew or Islamic calendar:
+
+`i h d'
+ Add a diary entry for the Hebrew date corresponding to the
+ selected date (`insert-hebrew-diary-entry').
+
+`i h m'
+ Add a diary entry for the day of the Hebrew month corresponding to
+ the selected date (`insert-monthly-hebrew-diary-entry'). This
+ diary entry matches any date that has the same Hebrew
+ day-within-month as the selected date.
+
+`i h y'
+ Add a diary entry for the day of the Hebrew year corresponding to
+ the selected date (`insert-yearly-hebrew-diary-entry'). This diary
+ entry matches any date which has the same Hebrew month and
+ day-within-month as the selected date.
+
+`i i d'
+ Add a diary entry for the Islamic date corresponding to the
+ selected date (`insert-islamic-diary-entry').
+
+`i i m'
+ Add a diary entry for the day of the Islamic month corresponding
+ to the selected date (`insert-monthly-islamic-diary-entry').
+
+`i i y'
+ Add a diary entry for the day of the Islamic year corresponding to
+ the selected date (`insert-yearly-islamic-diary-entry').
+
+ These commands work much like the corresponding commands for ordinary
+diary entries: they apply to the date that point is on in the calendar
+window, and what they do is insert just the date portion of a diary
+entry at the end of your diary file. You must then insert the rest of
+the diary entry.
+
+\1f
File: xemacs.info, Node: Fancy Diary Display, Next: Included Diary Files, Prev: Hebrew/Islamic Entries, Up: Calendar Customization
Fancy Diary Display
If you use the fancy diary display, you can use the normal hook
`list-diary-entries-hook' to sort each day's diary entries by their
-time of day. Add this line to your `.emacs' file:
+time of day. Add this line to your init file:
(add-hook 'list-diary-entries-hook 'sort-diary-entries t)
+ *Note Init File::.
+
For each day, this sorts diary entries that begin with a recognizable
time of day according to their times. Diary entries without times come
first within each day.
depend on the variable `date'; this variable is a list (MONTH DAY YEAR)
that gives the Gregorian date for which the diary entries are being
found. If the value of the expression is `t', the entry applies to
-that date. If the expression evaluates to `nil', the entry does *not*
+that date. If the expression evaluates to `nil', the entry does _not_
apply to that date.
The following sexp diary entries take advantage of the ability (in
scripture reading.
`%%(diary-sabbath-candles)'
- Make a Friday diary entry that tells the *local time* of Sabbath
+ Make a Friday diary entry that tells the _local time_ of Sabbath
candle lighting.
`%%(diary-omer)'
`%%(diary-yahrzeit MONTH DAY YEAR) NAME'
Make a diary entry marking the anniversary of a date of death.
- The date is the *Gregorian* (civil) date of death. The diary
+ The date is the _Gregorian_ (civil) date of death. The diary
entry appears on the proper Hebrew calendar anniversary and on the
day before. (In the European style, the order of the parameters
is changed to DAY, MONTH, YEAR.)
directory, the directories in the list `exec-path' are searched; this
list is initialized based on the `PATH' environment variable when you
start XEmacs. You can override either or both of these default
-initializations in your `.emacs' file.
+initializations in your init file. *Note Init File::.
When you use `M-!' and `M-|', XEmacs has to wait until the shell
command completes. You can quit with `C-g'; that terminates the shell
command.
-\1f
-File: xemacs.info, Node: Interactive Shell, Next: Shell Mode, Prev: Single Shell, Up: Shell
-
-Interactive Inferior Shell
---------------------------
-
- To run a subshell interactively with its typescript in an XEmacs
-buffer, use `M-x shell'. This creates (or reuses) a buffer named
-`*shell*' and runs a subshell with input coming from and output going
-to that buffer. That is to say, any "terminal output" from the subshell
-will go into the buffer, advancing point, and any "terminal input" for
-the subshell comes from text in the buffer. To give input to the
-subshell, go to the end of the buffer and type the input, terminated by
-<RET>.
-
- XEmacs does not wait for the subshell to do anything. You can switch
-windows or buffers and edit them while the shell is waiting, or while
-it is running a command. Output from the subshell waits until XEmacs
-has time to process it; this happens whenever XEmacs is waiting for
-keyboard input or for time to elapse.
-
- To get multiple subshells, change the name of buffer `*shell*' to
-something different by using `M-x rename-buffer'. The next use of `M-x
-shell' creates a new buffer `*shell*' with its own subshell. By
-renaming this buffer as well you can create a third one, and so on.
-All the subshells run independently and in parallel.
-
- The file name used to load the subshell is the value of the variable
-`explicit-shell-file-name', if that is non-`nil'. Otherwise, the
-environment variable `ESHELL' is used, or the environment variable
-`SHELL' if there is no `ESHELL'. If the file name specified is
-relative, the directories in the list `exec-path' are searched (*note
-Single Shell Commands: Single Shell.).
-
- As soon as the subshell is started, it is sent as input the contents
-of the file `~/.emacs_SHELLNAME', if that file exists, where SHELLNAME
-is the name of the file that the shell was loaded from. For example,
-if you use `csh', the file sent to it is `~/.emacs_csh'.
-
- `cd', `pushd', and `popd' commands given to the inferior shell are
-watched by XEmacs so it can keep the `*shell*' buffer's default
-directory the same as the shell's working directory. These commands
-are recognized syntactically by examining lines of input that are sent.
-If you use aliases for these commands, you can tell XEmacs to
-recognize them also. For example, if the value of the variable
-`shell-pushd-regexp' matches the beginning of a shell command line,
-that line is regarded as a `pushd' command. Change this variable when
-you add aliases for `pushd'. Likewise, `shell-popd-regexp' and
-`shell-cd-regexp' are used to recognize commands with the meaning of
-`popd' and `cd'.
-
- `M-x shell-resync-dirs' queries the shell and resynchronizes XEmacs'
-idea of what the current directory stack is. `M-x
-shell-dirtrack-toggle' turns directory tracking on and off.
-
- XEmacs keeps a history of the most recent commands you have typed in
-the `*shell*' buffer. If you are at the beginning of a shell command
-line and type <M-p>, the previous shell input is inserted into the
-buffer before point. Immediately typing <M-p> again deletes that input
-and inserts the one before it. By repeating <M-p> you can move
-backward through your commands until you find one you want to repeat.
-You may then edit the command before typing <RET> if you wish. <M-n>
-moves forward through the command history, in case you moved backward
-past the one you wanted while using <M-p>. If you type the first few
-characters of a previous command and then type <M-p>, the most recent
-shell input starting with those characters is inserted. This can be
-very convenient when you are repeating a sequence of shell commands.
-The variable `input-ring-size' controls how many commands are saved in
-your input history. The default is 30.
-
-\1f
-File: xemacs.info, Node: Shell Mode, Next: Terminal emulator, Prev: Interactive Shell, Up: Shell
-
-Shell Mode
-----------
-
- The shell buffer uses Shell mode, which defines several special keys
-attached to the `C-c' prefix. They are chosen to resemble the usual
-editing and job control characters present in shells that are not under
-XEmacs, except that you must type `C-c' first. Here is a list of the
-special key bindings of Shell mode:
-
-`<RET>'
- At end of buffer send line as input; otherwise, copy current line
- to end of buffer and send it (`send-shell-input'). When a line is
- copied, any text at the beginning of the line that matches the
- variable `shell-prompt-pattern' is left out; this variable's value
- should be a regexp string that matches the prompts that you use in
- your subshell.
-
-`C-c C-d'
- Send end-of-file as input, probably causing the shell or its
- current subjob to finish (`shell-send-eof').
-
-`C-d'
- If point is not at the end of the buffer, delete the next
- character just like most other modes. If point is at the end of
- the buffer, send end-of-file as input, instead of generating an
- error as in other modes (`comint-delchar-or-maybe-eof').
-
-`C-c C-u'
- Kill all text that has yet to be sent as input
- (`kill-shell-input').
-
-`C-c C-w'
- Kill a word before point (`backward-kill-word').
-
-`C-c C-c'
- Interrupt the shell or its current subjob if any
- (`interrupt-shell-subjob').
-
-`C-c C-z'
- Stop the shell or its current subjob if any (`stop-shell-subjob').
-
-`C-c C-\'
- Send quit signal to the shell or its current subjob if any
- (`quit-shell-subjob').
-
-`C-c C-o'
- Delete last batch of output from shell (`kill-output-from-shell').
-
-`C-c C-r'
- Scroll top of last batch of output to top of window
- (`show-output-from-shell').
-
-`C-c C-y'
- Copy the previous bunch of shell input and insert it into the
- buffer before point (`copy-last-shell-input'). No final newline
- is inserted, and the input copied is not resubmitted until you type
- <RET>.
-
-`M-p'
- Move backward through the input history. Search for a matching
- command if you have typed the beginning of a command
- (`comint-previous-input').
-
-`M-n'
- Move forward through the input history. Useful when you are using
- <M-p> quickly and go past the desired command
- (`comint-next-input').
-
-`<TAB>'
- Complete the file name preceding point (`comint-dynamic-complete').
-
-\1f
-File: xemacs.info, Node: Terminal emulator, Next: Term Mode, Prev: Shell Mode, Up: Shell
-
-Interactive Inferior Shell with Terminal Emulator
--------------------------------------------------
-
- To run a subshell in a terminal emulator, putting its typescript in
-an XEmacs buffer, use `M-x term'. This creates (or reuses) a buffer
-named `*term*' and runs a subshell with input coming from your keyboard
-and output going to that buffer.
-
- All the normal keys that you type are sent without any interpretation
-by XEmacs directly to the subshell, as "terminal input." Any "echo" of
-your input is the responsibility of the subshell. (The exception is
-the terminal escape character, which by default is `C-c'. *note Term
-Mode::..) Any "terminal output" from the subshell goes into the buffer,
-advancing point.
-
- Some programs (such as XEmacs itself) need to control the appearance
-on the terminal screen in detail. They do this by sending special
-control codes. The exact control codes needed vary from terminal to
-terminal, but nowadays most terminals and terminal emulators (including
-xterm) understand the so-called "ANSI escape sequences" (first
-popularized by the Digital's VT100 family of terminal). The term mode
-also understands these escape sequences, and for each control code does
-the appropriate thing to change the buffer so that the appearance of
-the window will match what it would be on a real terminal. Thus you
-can actually run XEmacs inside an XEmacs Term window!
-
- XEmacs does not wait for the subshell to do anything. You can switch
-windows or buffers and edit them while the shell is waiting, or while
-it is running a command. Output from the subshell waits until XEmacs
-has time to process it; this happens whenever XEmacs is waiting for
-keyboard input or for time to elapse.
-
- To make multiple terminal emulators, rename the buffer `*term*' to
-something different using `M-x rename-uniquely', just as with Shell
-mode.
-
- The file name used to load the subshell is determined the same way
-as for Shell mode.
-
- Unlike Shell mode, Term mode does not track the current directory by
-examining your input. Instead, if you use a programmable shell, you
-can have it tell Term what the current directory is. This is done
-automatically by bash for version 1.15 and later.
-
-\1f
-File: xemacs.info, Node: Term Mode, Next: Paging in Term, Prev: Terminal emulator, Up: Shell
-
-Term Mode
----------
-
- Term uses Term mode, which has two input modes: In line mode, Term
-basically acts like Shell mode. *Note Shell Mode::. In Char mode,
-each character is sent directly to the inferior subshell, except for
-the Term escape character, normally `C-c'.
-
- To switch between line and char mode, use these commands:
- findex term-char-mode
-
-`C-c C-k'
- Switch to line mode. Do nothing if already in line mode.
-
-`C-c C-j'
- Switch to char mode. Do nothing if already in char mode.
-
- The following commands are only available in Char mode:
-`C-c C-c'
- Send a literal <C-c> to the sub-shell.
-
-`C-c C-x'
- A prefix command to conveniently access the global <C-x> commands.
- For example, `C-c C-x o' invokes the global binding of `C-x o',
- which is normally `other-window'.
-
-\1f
-File: xemacs.info, Node: Paging in Term, Prev: Term Mode, Up: Shell
-
-Paging in the terminal emulator
--------------------------------
-
- Term mode has a pager feature. When the pager is enabled, term mode
-will pause at the end of each screenful.
-
-`C-c C-q'
- Toggles the pager feature: Disables the pager if it is enabled,
- and vice versa. This works in both line and char modes. If the
- pager enabled, the mode-line contains the word `page'.
-
- If the pager is enabled, and Term receives more than a screenful of
-output since your last input, Term will enter More break mode. This is
-indicated by `**MORE**' in the mode-line. Type a `Space' to display
-the next screenful of output. Type `?' to see your other options. The
-interface is similar to the Unix `more' program.
-
-\1f
-File: xemacs.info, Node: Narrowing, Next: Hardcopy, Prev: Shell, Up: Top
-
-Narrowing
-=========
-
- "Narrowing" means focusing in on some portion of the buffer, making
-the rest temporarily invisible and inaccessible. Cancelling the
-narrowing and making the entire buffer once again visible is called
-"widening". The amount of narrowing in effect in a buffer at any time
-is called the buffer's "restriction".
-
-`C-x n n'
- Narrow down to between point and mark (`narrow-to-region').
-
-`C-x n w'
- Widen to make the entire buffer visible again (`widen').
-
- Narrowing sometimes makes it easier to concentrate on a single
-subroutine or paragraph by eliminating clutter. It can also be used to
-restrict the range of operation of a replace command or repeating
-keyboard macro. The word `Narrow' appears in the mode line whenever
-narrowing is in effect. When you have narrowed to a part of the
-buffer, that part appears to be all there is. You can't see the rest,
-can't move into it (motion commands won't go outside the visible part),
-and can't change it in any way. However, the invisible text is not
-gone; if you save the file, it will be saved.
-
- The primary narrowing command is `C-x n n' (`narrow-to-region'). It
-sets the current buffer's restrictions so that the text in the current
-region remains visible but all text before the region or after the
-region is invisible. Point and mark do not change.
-
- Because narrowing can easily confuse users who do not understand it,
-`narrow-to-region' is normally a disabled command. Attempting to use
-this command asks for confirmation and gives you the option of enabling
-it; once you enable the command, confirmation will no longer be
-required. *Note Disabling::.
-
- To undo narrowing, use `C-x n w' (`widen'). This makes all text in
-the buffer accessible again.
-
- Use the `C-x =' command to get information on what part of the
-buffer you narrowed down. *Note Position Info::.
-
-\1f
-File: xemacs.info, Node: Hardcopy, Next: Recursive Edit, Prev: Narrowing, Up: Top
-
-Hardcopy Output
-===============
-
- The XEmacs commands for making hardcopy derive their names from the
-Unix commands `print' and `lpr'.
-
-`M-x print-buffer'
- Print hardcopy of current buffer using Unix command `print'
- (`lpr -p'). This command adds page headings containing the file
- name and page number.
-
-`M-x lpr-buffer'
- Print hardcopy of current buffer using Unix command `lpr'. This
- command does not add page headings.
-
-`M-x print-region'
- Like `print-buffer', but prints only the current region.
-
-`M-x lpr-region'
- Like `lpr-buffer', but prints only the current region.
-
- All the hardcopy commands pass extra switches to the `lpr' program
-based on the value of the variable `lpr-switches'. Its value should be
-a list of strings, each string a switch starting with `-'. For
-example, the value could be `("-Pfoo")' to print on printer `foo'.
-
-\1f
-File: xemacs.info, Node: Recursive Edit, Next: Dissociated Press, Prev: Hardcopy, Up: Top
-
-Recursive Editing Levels
-========================
-
- A "recursive edit" is a situation in which you are using XEmacs
-commands to perform arbitrary editing while in the middle of another
-XEmacs command. For example, when you type `C-r' inside a
-`query-replace', you enter a recursive edit in which you can change the
-current buffer. When you exit from the recursive edit, you go back to
-the `query-replace'.
-
- "Exiting" a recursive edit means returning to the unfinished
-command, which continues execution. For example, exiting the recursive
-edit requested by `C-r' in `query-replace' causes query replacing to
-resume. Exiting is done with `C-M-c' (`exit-recursive-edit').
-
- You can also "abort" a recursive edit. This is like exiting, but
-also quits the unfinished command immediately. Use the command `C-]'
-(`abort-recursive-edit') for this. *Note Quitting::.
-
- The mode line shows you when you are in a recursive edit by
-displaying square brackets around the parentheses that always surround
-the major and minor mode names. Every window's mode line shows the
-square brackets, since XEmacs as a whole, rather than any particular
-buffer, is in a recursive edit.
-
- It is possible to be in recursive edits within recursive edits. For
-example, after typing `C-r' in a `query-replace', you might type a
-command that entered the debugger. In such a case, two or more sets of
-square brackets appear in the mode line(s). Exiting the inner
-recursive edit (here with the debugger `c' command) resumes the
-query-replace command where it called the debugger. After the end of
-the query-replace command, you would be able to exit the first
-recursive edit. Aborting exits only one level of recursive edit; it
-returns to the command level of the previous recursive edit. You can
-then abort that one as well.
-
- The command `M-x top-level' aborts all levels of recursive edits,
-returning immediately to the top level command reader.
-
- The text you edit inside the recursive edit need not be the same text
-that you were editing at top level. If the command that invokes the
-recursive edit selects a different buffer first, that is the buffer you
-will edit recursively. You can switch buffers within the recursive edit
-in the normal manner (as long as the buffer-switching keys have not been
-rebound). While you could theoretically do the rest of your editing
-inside the recursive edit, including visiting files, this could have
-surprising effects (such as stack overflow) from time to time. It is
-best if you always exit or abort a recursive edit when you no longer
-need it.
-
- In general, XEmacs tries to avoid using recursive edits. It is
-usually preferable to allow users to switch among the possible editing
-modes in any order they like. With recursive edits, the only way to get
-to another state is to go "back" to the state that the recursive edit
-was invoked from.
-
-\1f
-File: xemacs.info, Node: Dissociated Press, Next: CONX, Prev: Recursive Edit, Up: Top
-
-Dissociated Press
-=================
-
- `M-x dissociated-press' is a command for scrambling a file of text
-either word by word or character by character. Starting from a buffer
-of straight English, it produces extremely amusing output. The input
-comes from the current XEmacs buffer. Dissociated Press writes its
-output in a buffer named `*Dissociation*', and redisplays that buffer
-after every couple of lines (approximately) to facilitate reading it.
-
- `dissociated-press' asks every so often whether to continue
-operating. Answer `n' to stop it. You can also stop at any time by
-typing `C-g'. The dissociation output remains in the `*Dissociation*'
-buffer for you to copy elsewhere if you wish.
-
- Dissociated Press operates by jumping at random from one point in the
-buffer to another. In order to produce plausible output rather than
-gibberish, it insists on a certain amount of overlap between the end of
-one run of consecutive words or characters and the start of the next.
-That is, if it has just printed out `president' and then decides to
-jump to a different point in the file, it might spot the `ent' in
-`pentagon' and continue from there, producing `presidentagon'. Long
-sample texts produce the best results.
-
- A positive argument to `M-x dissociated-press' tells it to operate
-character by character, and specifies the number of overlap characters.
-A negative argument tells it to operate word by word and specifies the
-number of overlap words. In this mode, whole words are treated as the
-elements to be permuted, rather than characters. No argument is
-equivalent to an argument of two. For your againformation, the output
-goes only into the buffer `*Dissociation*'. The buffer you start with
-is not changed.
-
- Dissociated Press produces nearly the same results as a Markov chain
-based on a frequency table constructed from the sample text. It is,
-however, an independent, ignoriginal invention. Dissociated Press
-techniquitously copies several consecutive characters from the sample
-between random choices, whereas a Markov chain would choose randomly for
-each word or character. This makes for more plausible sounding results
-and runs faster.
-
- It is a mustatement that too much use of Dissociated Press can be a
-developediment to your real work. Sometimes to the point of outragedy.
-And keep dissociwords out of your documentation, if you want it to be
-well userenced and properbose. Have fun. Your buggestions are welcome.
-
-\1f
-File: xemacs.info, Node: CONX, Next: Amusements, Prev: Dissociated Press, Up: Top
-
-CONX
-====
-
- Besides producing a file of scrambled text with Dissociated Press,
-you can generate random sentences by using CONX.
-
-`M-x conx'
- Generate random sentences in the `*conx*' buffer.
-
-`M-x conx-buffer'
- Absorb the text in the current buffer into the `conx' database.
-
-`M-x conx-init'
- Forget the current word-frequency tree.
-
-`M-x conx-load'
- Load a `conx' database that has been previously saved with `M-x
- conx-save'.
-
-`M-x conx-region'
- Absorb the text in the current buffer into the `conx' database.
-
-`M-x conx-save'
- Save the current `conx' database to a file for future retrieval.
-
- Copy text from a buffer using `M-x conx-buffer' or `M-x conx-region'
-and then type `M-x conx'. Output is continuously generated until you
-type <^G>. You can save the `conx' database to a file with `M-x
-conx-save', which you can retrieve with `M-x conx-load'. To clear the
-database, use `M-x conx-init'.
-
-\1f
-File: xemacs.info, Node: Amusements, Next: Emulation, Prev: CONX, Up: Top
-
-Other Amusements
-================
-
- If you are a little bit bored, you can try `M-x hanoi'. If you are
-considerably bored, give it a numeric argument. If you are very, very
-bored, try an argument of 9. Sit back and watch.
-
- When you are frustrated, try the famous Eliza program. Just do `M-x
-doctor'. End each input by typing `RET' twice.
-
- When you are feeling strange, type `M-x yow'.
-
-\1f
-File: xemacs.info, Node: Emulation, Next: Customization, Prev: Amusements, Up: Top
-
-Emulation
-=========
-
- XEmacs can be programmed to emulate (more or less) most other
-editors. Standard facilities can emulate these:
-
-Viper (a vi emulator)
- In XEmacs, Viper is the preferred emulation of vi within XEmacs.
- Viper is designed to allow you to take advantage of the best
- features of XEmacs while still doing your basic editing in a
- familiar, vi-like fashion. Viper provides various different
- levels of vi emulation, from a quite complete emulation that
- allows almost no access to native XEmacs commands, to an "expert"
- mode that combines the most useful vi commands with the most
- useful XEmacs commands.
-
- To start Viper, put the command
-
- (viper-mode)
-
- in your `.emacs' file.
-
- Viper comes with a separate manual that is provided standard with
- the XEmacs distribution.
-
-EDT (DEC VMS editor)
- Turn on EDT emulation with `M-x edt-emulation-on'. `M-x
- edt-emulation-off' restores normal Emacs command bindings.
-
- Most of the EDT emulation commands are keypad keys, and most
- standard Emacs key bindings are still available. The EDT
- emulation rebindings are done in the global keymap, so there is no
- problem switching buffers or major modes while in EDT emulation.
-
-Gosling Emacs
- Turn on emulation of Gosling Emacs (aka Unipress Emacs) with `M-x
- set-gosmacs-bindings'. This redefines many keys, mostly on the
- `C-x' and `ESC' prefixes, to work as they do in Gosmacs. `M-x
- set-gnu-bindings' returns to normal XEmacs by rebinding the same
- keys to the definitions they had at the time `M-x
- set-gosmacs-bindings' was done.
-
- It is also possible to run Mocklisp code written for Gosling Emacs.
- *Note Mocklisp::.
-
-\1f
-File: xemacs.info, Node: Customization, Next: Quitting, Prev: Emulation, Up: Top
-
-Customization
-*************
-
- This chapter talks about various topics relevant to adapting the
-behavior of Emacs in minor ways.
-
- All kinds of customization affect only the particular Emacs job that
-you do them in. They are completely lost when you kill the Emacs job,
-and have no effect on other Emacs jobs you may run at the same time or
-later. The only way an Emacs job can affect anything outside of it is
-by writing a file; in particular, the only way to make a customization
-`permanent' is to put something in your `.emacs' file or other
-appropriate file to do the customization in each session. *Note Init
-File::.
-
-* Menu:
-
-* Minor Modes:: Each minor mode is one feature you can turn on
- independently of any others.
-* Variables:: Many Emacs commands examine Emacs variables
- to decide what to do; by setting variables,
- you can control their functioning.
-* Keyboard Macros:: A keyboard macro records a sequence of keystrokes
- to be replayed with a single command.
-* Key Bindings:: The keymaps say what command each key runs.
- By changing them, you can "redefine keys".
-* Syntax:: The syntax table controls how words and expressions
- are parsed.
-* Init File:: How to write common customizations in the `.emacs'
- file.
-* Audible Bell:: Changing how Emacs sounds the bell.
-* Faces:: Changing the fonts and colors of a region of text.
-* X Resources:: X resources controlling various aspects of the
- behavior of XEmacs.
-
-\1f
-File: xemacs.info, Node: Minor Modes, Next: Variables, Up: Customization
-
-Minor Modes
-===========
-
- Minor modes are options which you can use or not. For example, Auto
-Fill mode is a minor mode in which <SPC> breaks lines between words as
-you type. All the minor modes are independent of each other and of the
-selected major mode. Most minor modes inform you in the mode line when
-they are on; for example, `Fill' in the mode line means that Auto Fill
-mode is on.
-
- Append `-mode' to the name of a minor mode to get the name of a
-command function that turns the mode on or off. Thus, the command to
-enable or disable Auto Fill mode is called `M-x auto-fill-mode'. These
-commands are usually invoked with `M-x', but you can bind keys to them
-if you wish. With no argument, the function turns the mode on if it was
-off and off if it was on. This is known as "toggling". A positive
-argument always turns the mode on, and an explicit zero argument or a
-negative argument always turns it off.
-
- Auto Fill mode allows you to enter filled text without breaking lines
-explicitly. Emacs inserts newlines as necessary to prevent lines from
-becoming too long. *Note Filling::.
-
- Overwrite mode causes ordinary printing characters to replace
-existing text instead of moving it to the right. For example, if point
-is in front of the `B' in `FOOBAR', and you type a `G' in Overwrite
-mode, it changes to `FOOGAR', instead of `FOOGBAR'.
-
- Abbrev mode allows you to define abbreviations that automatically
-expand as you type them. For example, `amd' might expand to `abbrev
-mode'. *Note Abbrevs::, for full information.
-
-\1f
-File: xemacs.info, Node: Variables, Next: Keyboard Macros, Prev: Minor Modes, Up: Customization
-
-Variables
-=========
-
- A "variable" is a Lisp symbol which has a value. Variable names can
-contain any characters, but by convention they are words separated by
-hyphens. A variable can also have a documentation string, which
-describes what kind of value it should have and how the value will be
-used.
-
- Lisp allows any variable to have any kind of value, but most
-variables that Emacs uses require a value of a certain type. Often the
-value has to be a string or a number. Sometimes we say that a certain
-feature is turned on if a variable is "non-`nil'," meaning that if the
-variable's value is `nil', the feature is off, but the feature is on
-for any other value. The conventional value to turn on the
-feature--since you have to pick one particular value when you set the
-variable--is `t'.
-
- Emacs uses many Lisp variables for internal recordkeeping, as any
-Lisp program must, but the most interesting variables for you are the
-ones that exist for the sake of customization. Emacs does not
-(usually) change the values of these variables; instead, you set the
-values, and thereby alter and control the behavior of certain Emacs
-commands. These variables are called "options". Most options are
-documented in this manual and appear in the Variable Index (*note
-Variable Index::.).
-
- One example of a variable which is an option is `fill-column', which
-specifies the position of the right margin (as a number of characters
-from the left margin) to be used by the fill commands (*note
-Filling::.).
-
-* Menu:
-
-* Examining:: Examining or setting one variable's value.
-* Easy Customization:: Convenient and easy customization of variables.
-* Edit Options:: Examining or editing list of all variables' values.
-* Locals:: Per-buffer values of variables.
-* File Variables:: How files can specify variable values.
-
-\1f
-File: xemacs.info, Node: Examining, Next: Easy Customization, Up: Variables
-
-Examining and Setting Variables
--------------------------------
-
-`C-h v'
-`M-x describe-variable'
- Print the value and documentation of a variable.
-
-`M-x set-variable'
- Change the value of a variable.
-
- To examine the value of a single variable, use `C-h v'
-(`describe-variable'), which reads a variable name using the
-minibuffer, with completion. It prints both the value and the
-documentation of the variable.
-
- C-h v fill-column <RET>
-
-prints something like:
-
- fill-column's value is 75
-
- Documentation:
- *Column beyond which automatic line-wrapping should happen.
- Automatically becomes local when set in any fashion.
-
-The star at the beginning of the documentation indicates that this
-variable is an option. `C-h v' is not restricted to options; it allows
-any variable name.
-
- If you know which option you want to set, you can use `M-x
-set-variable' to set it. This prompts for the variable name in the
-minibuffer (with completion), and then prompts for a Lisp expression
-for the new value using the minibuffer a second time. For example,
-
- M-x set-variable <RET> fill-column <RET> 75 <RET>
-
-sets `fill-column' to 75, as if you had executed the Lisp expression
-`(setq fill-column 75)'.
-
- Setting variables in this way, like all means of customizing Emacs
-except where explicitly stated, affects only the current Emacs session.
-
-\1f
-File: xemacs.info, Node: Easy Customization, Next: Edit Options, Prev: Examining, Up: Variables
-
-Easy Customization Interface
-----------------------------
-
- A convenient way to find the user option variables that you want to
-change, and then change them, is with `M-x customize'. This command
-creates a "customization buffer" with which you can browse through the
-Emacs user options in a logically organized structure, then edit and
-set their values. You can also use the customization buffer to save
-settings permanently. (Not all Emacs user options are included in this
-structure as of yet, but we are adding the rest.)
-
-* Menu:
-
-* Groups: Customization Groups.
- How options are classified in a structure.
-* Changing an Option:: How to edit a value and set an option.
-* Face Customization:: How to edit the attributes of a face.
-* Specific Customization:: Making a customization buffer for specific
- options, faces, or groups.
-
-\1f
-File: xemacs.info, Node: Customization Groups, Next: Changing an Option, Up: Easy Customization
-
-Customization Groups
-....................
-
- For customization purposes, user options are organized into "groups"
-to help you find them. Groups are collected into bigger groups, all
-the way up to a master group called `Emacs'.
-
- `M-x customize' creates a customization buffer that shows the
-top-level `Emacs' group and the second-level groups immediately under
-it. It looks like this, in part:
-
- /- Emacs group: ---------------------------------------------------\
- [State]: visible group members are all at standard settings.
- Customization of the One True Editor.
- See also [Manual].
-
- [Open] Editing group
- Basic text editing facilities.
-
- [Open] External group
- Interfacing to external utilities.
-
- MORE SECOND-LEVEL GROUPS
-
- \- Emacs group end ------------------------------------------------/
-
-This says that the buffer displays the contents of the `Emacs' group.
-The other groups are listed because they are its contents. But they
-are listed differently, without indentation and dashes, because *their*
-contents are not included. Each group has a single-line documentation
-string; the `Emacs' group also has a `[State]' line.
-
- Most of the text in the customization buffer is read-only, but it
-typically includes some "editable fields" that you can edit. There are
-also "active fields"; this means a field that does something when you
-"invoke" it. To invoke an active field, either click on it with
-`Mouse-1', or move point to it and type <RET>.
-
- For example, the phrase `[Open]' that appears in a second-level
-group is an active field. Invoking the `[Open]' field for a group
-opens up a new customization buffer, which shows that group and its
-contents. This field is a kind of hypertext link to another group.
-
- The `Emacs' group does not include any user options itself, but
-other groups do. By examining various groups, you will eventually find
-the options and faces that belong to the feature you are interested in
-customizing. Then you can use the customization buffer to set them.
-
- You can view the structure of customization groups on a larger scale
-with `M-x customize-browse'. This command creates a special kind of
-customization buffer which shows only the names of the groups (and
-options and faces), and their structure.
-
- In this buffer, you can show the contents of a group by invoking
-`[+]'. When the group contents are visible, this button changes to
-`[-]'; invoking that hides the group contents.
-
- Each group, option or face name in this buffer has an active field
-which says `[Group]', `[Option]' or `[Face]'. Invoking that active
-field creates an ordinary customization buffer showing just that group
-and its contents, just that option, or just that face. This is the way
-to set values in it.
-
projects / chise / xemacs-chise.git / blobdiff