-This is ../info/xemacs.info, produced by makeinfo version 3.12s from
+This is ../info/xemacs.info, produced by makeinfo version 4.0 from
xemacs/xemacs.texi.
INFO-DIR-SECTION XEmacs Editor
translation approved by the author instead of in the original English.
\1f
+File: xemacs.info, Node: Adding to Diary, Next: Special Diary Entries, Prev: Date Formats, Up: Diary
+
+Commands to Add to the Diary
+----------------------------
+
+ While in the calendar, there are several commands to create diary
+entries:
+
+`i d'
+ Add a diary entry for the selected date (`insert-diary-entry').
+
+`i w'
+ Add a diary entry for the selected day of the week
+ (`insert-weekly-diary-entry').
+
+`i m'
+ Add a diary entry for the selected day of the month
+ (`insert-monthly-diary-entry').
+
+`i y'
+ Add a diary entry for the selected day of the year
+ (`insert-yearly-diary-entry').
+
+ You can make a diary entry for a specific date by selecting that date
+in the calendar window and typing the `i d' command. This command
+displays the end of your diary file in another window and inserts the
+date; you can then type the rest of the diary entry.
+
+ If you want to make a diary entry that applies to a specific day of
+the week, select that day of the week (any occurrence will do) and type
+`i w'. This inserts the day-of-week as a generic date; you can then
+type the rest of the diary entry. You can make a monthly diary entry in
+the same fashion. Select the day of the month, use the `i m' command,
+and type rest of the entry. Similarly, you can insert a yearly diary
+entry with the `i y' command.
+
+ All of the above commands make marking diary entries by default. To
+make a nonmarking diary entry, give a numeric argument to the command.
+For example, `C-u i w' makes a nonmarking weekly diary entry.
+
+ When you modify the diary file, be sure to save the file before
+exiting Emacs.
+
+\1f
+File: xemacs.info, Node: Special Diary Entries, Prev: Adding to Diary, Up: Diary
+
+Special Diary Entries
+---------------------
+
+ In addition to entries based on calendar dates, the diary file can
+contain "sexp entries" for regular events such as anniversaries. These
+entries are based on Lisp expressions (sexps) that Emacs evaluates as
+it scans the diary file. Instead of a date, a sexp entry contains `%%'
+followed by a Lisp expression which must begin and end with
+parentheses. The Lisp expression determines which dates the entry
+applies to.
+
+ Calendar mode provides commands to insert certain commonly used sexp
+entries:
+
+`i a'
+ Add an anniversary diary entry for the selected date
+ (`insert-anniversary-diary-entry').
+
+`i b'
+ Add a block diary entry for the current region
+ (`insert-block-diary-entry').
+
+`i c'
+ Add a cyclic diary entry starting at the date
+ (`insert-cyclic-diary-entry').
+
+ If you want to make a diary entry that applies to the anniversary of
+a specific date, move point to that date and use the `i a' command.
+This displays the end of your diary file in another window and inserts
+the anniversary description; you can then type the rest of the diary
+entry. The entry looks like this:
+
+ The effect of `i a' is to add a `diary-anniversary' sexp to your
+diary file. You can also add one manually, for instance:
+
+ %%(diary-anniversary 10 31 1948) Arthur's birthday
+
+This entry applies to October 31 in any year after 1948; `10 31 1948'
+specifies the date. (If you are using the European calendar style, the
+month and day are interchanged.) The reason this expression requires a
+beginning year is that advanced diary functions can use it to calculate
+the number of elapsed years.
+
+ A "block" diary entry applies to a specified range of consecutive
+dates. Here is a block diary entry that applies to all dates from June
+24, 1990 through July 10, 1990:
+
+ %%(diary-block 6 24 1990 7 10 1990) Vacation
+
+The `6 24 1990' indicates the starting date and the `7 10 1990'
+indicates the stopping date. (Again, if you are using the European
+calendar style, the month and day are interchanged.)
+
+ To insert a block entry, place point and the mark on the two dates
+that begin and end the range, and type `i b'. This command displays
+the end of your diary file in another window and inserts the block
+description; you can then type the diary entry.
+
+ "Cyclic" diary entries repeat after a fixed interval of days. To
+create one, select the starting date and use the `i c' command. The
+command prompts for the length of interval, then inserts the entry,
+which looks like this:
+
+ %%(diary-cyclic 50 3 1 1990) Renew medication
+
+This entry applies to March 1, 1990 and every 50th day following; `3 1
+1990' specifies the starting date. (If you are using the European
+calendar style, the month and day are interchanged.)
+
+ All three of these commands make marking diary entries. To insert a
+nonmarking entry, give a numeric argument to the command. For example,
+`C-u i a' makes a nonmarking anniversary diary entry.
+
+ Marking sexp diary entries in the calendar is _extremely_
+time-consuming, since every date visible in the calendar window must be
+individually checked. So it's a good idea to make sexp diary entries
+nonmarking (with `&') when possible.
+
+ Another sophisticated kind of sexp entry, a "floating" diary entry,
+specifies a regularly occurring event by offsets specified in days,
+weeks, and months. It is comparable to a crontab entry interpreted by
+the `cron' utility. Here is a nonmarking, floating diary entry that
+applies to the last Thursday in November:
+
+ &%%(diary-float 11 4 -1) American Thanksgiving
+
+The 11 specifies November (the eleventh month), the 4 specifies Thursday
+(the fourth day of the week, where Sunday is numbered zero), and the -1
+specifies "last" (1 would mean "first", 2 would mean "second", -2 would
+mean "second-to-last", and so on). The month can be a single month or
+a list of months. Thus you could change the 11 above to `'(1 2 3)' and
+have the entry apply to the last Thursday of January, February, and
+March. If the month is `t', the entry applies to all months of the
+year.
+
+ The sexp feature of the diary allows you to specify diary entries
+based on any Emacs Lisp expression. You can use the library of built-in
+functions or you can write your own functions. The built-in functions
+include the ones shown in this section, plus a few others (*note Sexp
+Diary Entries::).
+
+ The generality of sexps lets you specify any diary entry that you can
+describe algorithmically. Suppose you get paid on the 21st of the month
+if it is a weekday, and to the Friday before if the 21st is on a
+weekend. The diary entry
+
+ &%%(let ((dayname (calendar-day-of-week date))
+ (day (car (cdr date))))
+ (or (and (= day 21) (memq dayname '(1 2 3 4 5)))
+ (and (memq day '(19 20)) (= dayname 5)))
+ ) Pay check deposited
+
+to just those dates. This example illustrates how the sexp can depend
+on the variable `date'; this variable is a list (MONTH DAY YEAR) that
+gives the Gregorian date for which the diary entries are being found.
+If the value of the sexp is `t', the entry applies to that date. If
+the sexp evaluates to `nil', the entry does _not_ apply to that date.
+
+\1f
+File: xemacs.info, Node: Calendar Customization, Prev: Diary, Up: Calendar/Diary
+
+Customizing the Calendar and Diary
+----------------------------------
+
+ There are many customizations that you can use to make the calendar
+and diary suit your personal tastes.
+
+* Menu:
+
+* Calendar Customizing:: Defaults you can set.
+* Holiday Customizing:: Defining your own holidays.
+* Date Display Format:: Changing the format.
+* Time Display Format:: Changing the format.
+* Daylight Savings:: Changing the default.
+* Diary Customizing:: Defaults you can set.
+* Hebrew/Islamic Entries:: How to obtain them.
+* Fancy Diary Display:: Enhancing the diary display, sorting entries.
+* Included Diary Files:: Sharing a common diary file.
+* Sexp Diary Entries:: Fancy things you can do.
+* Appt Customizing:: Customizing appointment reminders.
+
+\1f
+File: xemacs.info, Node: Calendar Customizing, Next: Holiday Customizing, Up: Calendar Customization
+
+Customizing the Calendar
+........................
+
+ If you set the variable `view-diary-entries-initially' to `t',
+calling up the calendar automatically displays the diary entries for
+the current date as well. The diary dates appear only if the current
+date is visible. If you add both of the following lines to your init
+file:
+
+ (setq view-diary-entries-initially t)
+ (calendar)
+
+this displays both the calendar and diary windows whenever you start
+Emacs. *Note Init File::.
+
+ Similarly, if you set the variable
+`view-calendar-holidays-initially' to `t', entering the calendar
+automatically displays a list of holidays for the current three-month
+period. The holiday list appears in a separate window.
+
+ You can set the variable `mark-diary-entries-in-calendar' to `t' in
+order to mark any dates with diary entries. This takes effect whenever
+the calendar window contents are recomputed. There are two ways of
+marking these dates: by changing the face (*note Faces::), if the
+display supports that, or by placing a plus sign (`+') beside the date
+otherwise.
+
+ Similarly, setting the variable `mark-holidays-in-calendar' to `t'
+marks holiday dates, either with a change of face or with an asterisk
+(`*').
+
+ The variable `calendar-holiday-marker' specifies how to mark a date
+as being a holiday. Its value may be a character to insert next to the
+date, or a face name to use for displaying the date. Likewise, the
+variable `diary-entry-marker' specifies how to mark a date that has
+diary entries. The calendar creates faces named `holiday-face' and
+`diary-face' for these purposes; those symbols are the default values
+of these variables, when Emacs supports multiple faces on your terminal.
+
+ The variable `calendar-load-hook' is a normal hook run when the
+calendar package is first loaded (before actually starting to display
+the calendar).
+
+ Starting the calendar runs the normal hook
+`initial-calendar-window-hook'. Recomputation of the calendar display
+does not run this hook. But if you leave the calendar with the `q'
+command and reenter it, the hook runs again.
+
+ The variable `today-visible-calendar-hook' is a normal hook run
+after the calendar buffer has been prepared with the calendar when the
+current date is visible in the window. One use of this hook is to
+replace today's date with asterisks; to do that, use the hook function
+`calendar-star-date'.
+
+ (add-hook 'today-visible-calendar-hook 'calendar-star-date)
+
+Another standard hook function marks the current date, either by
+changing its face or by adding an asterisk. Here's how to use it:
+
+ (add-hook 'today-visible-calendar-hook 'calendar-mark-today)
+
+The variable `calendar-today-marker' specifies how to mark today's
+date. Its value should be a character to insert next to the date or a
+face name to use for displaying the date. A face named
+`calendar-today-face' is provided for this purpose; that symbol is the
+default for this variable when Emacs supports multiple faces on your
+terminal.
+
+A similar normal hook, `today-invisible-calendar-hook' is run if the
+current date is _not_ visible in the window.
+
+\1f
+File: xemacs.info, Node: Holiday Customizing, Next: Date Display Format, Prev: Calendar Customizing, Up: Calendar Customization
+
+Customizing the Holidays
+........................
+
+ Emacs knows about holidays defined by entries on one of several
+lists. You can customize these lists of holidays to your own needs,
+adding or deleting holidays. The lists of holidays that Emacs uses are
+for general holidays (`general-holidays'), local holidays
+(`local-holidays'), Christian holidays (`christian-holidays'), Hebrew
+(Jewish) holidays (`hebrew-holidays'), Islamic (Moslem) holidays
+(`islamic-holidays'), and other holidays (`other-holidays').
+
+ The general holidays are, by default, holidays common throughout the
+United States. To eliminate these holidays, set `general-holidays' to
+`nil'.
+
+ There are no default local holidays (but sites may supply some). You
+can set the variable `local-holidays' to any list of holidays, as
+described below.
+
+ By default, Emacs does not include all the holidays of the religions
+that it knows, only those commonly found in secular calendars. For a
+more extensive collection of religious holidays, you can set any (or
+all) of the variables `all-christian-calendar-holidays',
+`all-hebrew-calendar-holidays', or `all-islamic-calendar-holidays' to
+`t'. If you want to eliminate the religious holidays, set any or all
+of the corresponding variables `christian-holidays', `hebrew-holidays',
+and `islamic-holidays' to `nil'.
+
+ You can set the variable `other-holidays' to any list of holidays.
+This list, normally empty, is intended for individual use.
+
+ Each of the lists (`general-holidays', `local-holidays',
+`christian-holidays', `hebrew-holidays', `islamic-holidays', and
+`other-holidays') is a list of "holiday forms", each holiday form
+describing a holiday (or sometimes a list of holidays).
+
+ Here is a table of the possible kinds of holiday form. Day numbers
+and month numbers count starting from 1, but "dayname" numbers count
+Sunday as 0. The element STRING is always the name of the holiday, as
+a string.
+
+`(holiday-fixed MONTH DAY STRING)'
+ A fixed date on the Gregorian calendar. MONTH and DAY are
+ numbers, STRING is the name of the holiday.
+
+`(holiday-float MONTH DAYNAME K STRING)'
+ The Kth DAYNAME in MONTH on the Gregorian calendar (DAYNAME=0 for
+ Sunday, and so on); negative K means count back from the end of
+ the month. STRING is the name of the holiday.
+
+`(holiday-hebrew MONTH DAY STRING)'
+ A fixed date on the Hebrew calendar. MONTH and DAY are numbers,
+ STRING is the name of the holiday.
+
+`(holiday-islamic MONTH DAY STRING)'
+ A fixed date on the Islamic calendar. MONTH and DAY are numbers,
+ STRING is the name of the holiday.
+
+`(holiday-julian MONTH DAY STRING)'
+ A fixed date on the Julian calendar. MONTH and DAY are numbers,
+ STRING is the name of the holiday.
+
+`(holiday-sexp SEXP STRING)'
+ A date calculated by the Lisp expression SEXP. The expression
+ should use the variable `year' to compute and return the date of a
+ holiday, or `nil' if the holiday doesn't happen this year. The
+ value of SEXP must represent the date as a list of the form
+ `(MONTH DAY YEAR)'. STRING is the name of the holiday.
+
+`(if CONDITION HOLIDAY-FORM &optional HOLIDAY-FORM)'
+ A holiday that happens only if CONDITION is true.
+
+`(FUNCTION [ARGS])'
+ A list of dates calculated by the function FUNCTION, called with
+ arguments ARGS.
+
+ For example, suppose you want to add Bastille Day, celebrated in
+France on July 14. You can do this by adding the following line to
+your init file:
+
+ (setq other-holidays '((holiday-fixed 7 14 "Bastille Day")))
+
+ *Note Init File::.
+
+The holiday form `(holiday-fixed 7 14 "Bastille Day")' specifies the
+fourteenth day of the seventh month (July).
+
+ Many holidays occur on a specific day of the week, at a specific time
+of month. Here is a holiday form describing Hurricane Supplication Day,
+celebrated in the Virgin Islands on the fourth Monday in August:
+
+ (holiday-float 8 1 4 "Hurricane Supplication Day")
+
+Here the 8 specifies August, the 1 specifies Monday (Sunday is 0,
+Tuesday is 2, and so on), and the 4 specifies the fourth occurrence in
+the month (1 specifies the first occurrence, 2 the second occurrence,
+-1 the last occurrence, -2 the second-to-last occurrence, and so on).
+
+ You can specify holidays that occur on fixed days of the Hebrew,
+Islamic, and Julian calendars too. For example,
+
+ (setq other-holidays
+ '((holiday-hebrew 10 2 "Last day of Hanukkah")
+ (holiday-islamic 3 12 "Mohammed's Birthday")
+ (holiday-julian 4 2 "Jefferson's Birthday")))
+
+adds the last day of Hanukkah (since the Hebrew months are numbered with
+1 starting from Nisan), the Islamic feast celebrating Mohammed's
+birthday (since the Islamic months are numbered from 1 starting with
+Muharram), and Thomas Jefferson's birthday, which is 2 April 1743 on the
+Julian calendar.
+
+ To include a holiday conditionally, use either Emacs Lisp's `if' or
+the `holiday-sexp' form. For example, American presidential elections
+occur on the first Tuesday after the first Monday in November of years
+divisible by 4:
+
+ (holiday-sexp (if (= 0 (% year 4))
+ (calendar-gregorian-from-absolute
+ (1+ (calendar-dayname-on-or-before
+ 1 (+ 6 (calendar-absolute-from-gregorian
+ (list 11 1 year))))))
+ "US Presidential Election"))
+
+or
+
+ (if (= 0 (% displayed-year 4))
+ (fixed 11
+ (extract-calendar-day
+ (calendar-gregorian-from-absolute
+ (1+ (calendar-dayname-on-or-before
+ 1 (+ 6 (calendar-absolute-from-gregorian
+ (list 11 1 displayed-year)))))))
+ "US Presidential Election"))
+
+ Some holidays just don't fit into any of these forms because special
+calculations are involved in their determination. In such cases you
+must write a Lisp function to do the calculation. To include eclipses,
+for example, add `(eclipses)' to `other-holidays' and write an Emacs
+Lisp function `eclipses' that returns a (possibly empty) list of the
+relevant Gregorian dates among the range visible in the calendar
+window, with descriptive strings, like this:
+
+ (((6 27 1991) "Lunar Eclipse") ((7 11 1991) "Solar Eclipse") ... )
+
+\1f
+File: xemacs.info, Node: Date Display Format, Next: Time Display Format, Prev: Holiday Customizing, Up: Calendar Customization
+
+Date Display Format
+...................
+
+ You can customize the manner of displaying dates in the diary, in
+mode lines, and in messages by setting `calendar-date-display-form'.
+This variable holds a list of expressions that can involve the variables
+`month', `day', and `year', which are all numbers in string form, and
+`monthname' and `dayname', which are both alphabetic strings. In the
+American style, the default value of this list is as follows:
+
+ ((if dayname (concat dayname ", ")) monthname " " day ", " year)
+
+while in the European style this value is the default:
+
+ ((if dayname (concat dayname ", ")) day " " monthname " " year)
+
+ + The ISO standard date representation is this:
+
+ (year "-" month "-" day)
+
+This specifies a typical American format:
+
+ (month "/" day "/" (substring year -2))
+
+\1f
+File: xemacs.info, Node: Time Display Format, Next: Daylight Savings, Prev: Date Display Format, Up: Calendar Customization
+
+Time Display Format
+...................
+
+ The calendar and diary by default display times of day in the
+conventional American style with the hours from 1 through 12, minutes,
+and either `am' or `pm'. If you prefer the European style, also known
+in the US as military, in which the hours go from 00 to 23, you can
+alter the variable `calendar-time-display-form'. This variable is a
+list of expressions that can involve the variables `12-hours',
+`24-hours', and `minutes', which are all numbers in string form, and
+`am-pm' and `time-zone', which are both alphabetic strings. The
+default value of `calendar-time-display-form' is as follows:
+
+ (12-hours ":" minutes am-pm
+ (if time-zone " (") time-zone (if time-zone ")"))
+
+Here is a value that provides European style times:
+
+ (24-hours ":" minutes
+ (if time-zone " (") time-zone (if time-zone ")"))
+
+gives military-style times like `21:07 (UT)' if time zone names are
+defined, and times like `21:07' if they are not.
+
+\1f
+File: xemacs.info, Node: Daylight Savings, Next: Diary Customizing, Prev: Time Display Format, Up: Calendar Customization
+
+Daylight Savings Time
+.....................
+
+ Emacs understands the difference between standard time and daylight
+savings time--the times given for sunrise, sunset, solstices,
+equinoxes, and the phases of the moon take that into account. The rules
+for daylight savings time vary from place to place and have also varied
+historically from year to year. To do the job properly, Emacs needs to
+know which rules to use.
+
+ Some operating systems keep track of the rules that apply to the
+place where you are; on these systems, Emacs gets the information it
+needs from the system automatically. If some or all of this
+information is missing, Emacs fills in the gaps with the rules
+currently used in Cambridge, Massachusetts. If the resulting rules are
+not what you want, you can tell Emacs the rules to use by setting
+certain variables.
+
+ If the default choice of rules is not appropriate for your location,
+you can tell Emacs the rules to use by setting the variables
+`calendar-daylight-savings-starts' and
+`calendar-daylight-savings-ends'. Their values should be Lisp
+expressions that refer to the variable `year', and evaluate to the
+Gregorian date on which daylight savings time starts or (respectively)
+ends, in the form of a list `(MONTH DAY YEAR)'. The values should be
+`nil' if your area does not use daylight savings time.
+
+ Emacs uses these expressions to determine the starting date of
+daylight savings time for the holiday list and for correcting times of
+day in the solar and lunar calculations.
+
+ The values for Cambridge, Massachusetts are as follows:
+
+ (calendar-nth-named-day 1 0 4 year)
+ (calendar-nth-named-day -1 0 10 year)
+
+That is, the first 0th day (Sunday) of the fourth month (April) in the
+year specified by `year', and the last Sunday of the tenth month
+(October) of that year. If daylight savings time were changed to start
+on October 1, you would set `calendar-daylight-savings-starts' to this:
+
+ (list 10 1 year)
+
+ For a more complex example, suppose daylight savings time begins on
+the first of Nisan on the Hebrew calendar. You should set
+`calendar-daylight-savings-starts' to this value:
+
+ (calendar-gregorian-from-absolute
+ (calendar-absolute-from-hebrew
+ (list 1 1 (+ year 3760))))
+
+because Nisan is the first month in the Hebrew calendar and the Hebrew
+year differs from the Gregorian year by 3760 at Nisan.
+
+ If there is no daylight savings time at your location, or if you want
+all times in standard time, set `calendar-daylight-savings-starts' and
+`calendar-daylight-savings-ends' to `nil'.
+
+ The variable `calendar-daylight-time-offset' specifies the
+difference between daylight savings time and standard time, measured in
+minutes. The value for Cambridge, Massachusetts is 60.
+
+ The two variables `calendar-daylight-savings-starts-time' and
+`calendar-daylight-savings-ends-time' specify the number of minutes
+after midnight local time when the transition to and from daylight
+savings time should occur. For Cambridge, Massachusetts both variables'
+values are 120.
+
+\1f
+File: xemacs.info, Node: Diary Customizing, Next: Hebrew/Islamic Entries, Prev: Daylight Savings, Up: Calendar Customization
+
+Customizing the Diary
+.....................
+
+ Ordinarily, the mode line of the diary buffer window indicates any
+holidays that fall on the date of the diary entries. The process of
+checking for holidays can take several seconds, so including holiday
+information delays the display of the diary buffer noticeably. If you'd
+prefer to have a faster display of the diary buffer but without the
+holiday information, set the variable `holidays-in-diary-buffer' to
+`nil'.
+
+ The variable `number-of-diary-entries' controls the number of days
+of diary entries to be displayed at one time. It affects the initial
+display when `view-diary-entries-initially' is `t', as well as the
+command `M-x diary'. For example, the default value is 1, which says
+to display only the current day's diary entries. If the value is 2,
+both the current day's and the next day's entries are displayed. The
+value can also be a vector of seven elements: for example, if the value
+is `[0 2 2 2 2 4 1]' then no diary entries appear on Sunday, the
+current date's and the next day's diary entries appear Monday through
+Thursday, Friday through Monday's entries appear on Friday, while on
+Saturday only that day's entries appear.
+
+ The variable `print-diary-entries-hook' is a normal hook run after
+preparation of a temporary buffer containing just the diary entries
+currently visible in the diary buffer. (The other, irrelevant diary
+entries are really absent from the temporary buffer; in the diary
+buffer, they are merely hidden.) The default value of this hook does
+the printing with the command `lpr-buffer'. If you want to use a
+different command to do the printing, just change the value of this
+hook. Other uses might include, for example, rearranging the lines into
+order by day and time.
+
+ You can customize the form of dates in your diary file, if neither
+the standard American nor European styles suits your needs, by setting
+the variable `diary-date-forms'. This variable is a list of patterns
+for recognizing a date. Each date pattern is a list whose elements may
+be regular expressions (*note Regexps::) or the symbols `month', `day',
+`year', `monthname', and `dayname'. All these elements serve as
+patterns that match certain kinds of text in the diary file. In order
+for the date pattern, as a whole, to match, all of its elements must
+match consecutively.
+
+ A regular expression in a date pattern matches in its usual fashion,
+using the standard syntax table altered so that `*' is a word
+constituent.
+
+ The symbols `month', `day', `year', `monthname', and `dayname' match
+the month number, day number, year number, month name, and day name of
+the date being considered. The symbols that match numbers allow
+leading zeros; those that match names allow three-letter abbreviations
+and capitalization. All the symbols can match `*'; since `*' in a
+diary entry means "any day", "any month", and so on, it should match
+regardless of the date being considered.
+
+ The default value of `diary-date-forms' in the American style is
+this:
+
+ ((month "/" day "[^/0-9]")
+ (month "/" day "/" year "[^0-9]")
+ (monthname " *" day "[^,0-9]")
+ (monthname " *" day ", *" year "[^0-9]")
+ (dayname "\\W"))
+
+Emacs matches of the diary entries with the date forms is done with the
+standard syntax table from Fundamental mode (*note Syntax Tables:
+(lispref)Syntax Tables.), but with the `*' changed so that it is a word
+constituent.
+
+ The date patterns in the list must be _mutually exclusive_ and must
+not match any portion of the diary entry itself, just the date and one
+character of whitespace. If, to be mutually exclusive, the pattern
+must match a portion of the diary entry text--beyond the whitespace
+that ends the date--then the first element of the date pattern _must_
+be `backup'. This causes the date recognizer to back up to the
+beginning of the current word of the diary entry, after finishing the
+match. Even if you use `backup', the date pattern must absolutely not
+match more than a portion of the first word of the diary entry. The
+default value of `diary-date-forms' in the European style is this list:
+
+ ((day "/" month "[^/0-9]")
+ (day "/" month "/" year "[^0-9]")
+ (backup day " *" monthname "\\W+\\<[^*0-9]")
+ (day " *" monthname " *" year "[^0-9]")
+ (dayname "\\W"))
+
+Notice the use of `backup' in the third pattern, because it needs to
+match part of a word beyond the date itself to distinguish it from the
+fourth pattern.
+
+\1f
+File: xemacs.info, Node: Hebrew/Islamic Entries, Next: Fancy Diary Display, Prev: Diary Customizing, Up: Calendar Customization
+
+Hebrew- and Islamic-Date Diary Entries
+......................................
+
+ Your diary file can have entries based on Hebrew or Islamic dates, as
+well as entries based on the world-standard Gregorian calendar.
+However, because recognition of such entries is time-consuming and most
+people don't use them, you must explicitly enable their use. If you
+want the diary to recognize Hebrew-date diary entries, for example, you
+must do this:
+
+ (add-hook 'nongregorian-diary-listing-hook 'list-hebrew-diary-entries)
+ (add-hook 'nongregorian-diary-marking-hook 'mark-hebrew-diary-entries)
+
+If you want Islamic-date entries, do this:
+
+ (add-hook 'nongregorian-diary-listing-hook 'list-islamic-diary-entries)
+ (add-hook 'nongregorian-diary-marking-hook 'mark-islamic-diary-entries)
+
+ Hebrew- and Islamic-date diary entries have the same formats as
+Gregorian-date diary entries, except that `H' precedes a Hebrew date
+and `I' precedes an Islamic date. Moreover, because the Hebrew and
+Islamic month names are not uniquely specified by the first three
+letters, you may not abbreviate them. For example, a diary entry for
+the Hebrew date Heshvan 25 could look like this:
+
+ HHeshvan 25 Happy Hebrew birthday!
+
+and would appear in the diary for any date that corresponds to Heshvan
+25 on the Hebrew calendar. And here is Islamic-date diary entry that
+matches Dhu al-Qada 25:
+
+ IDhu al-Qada 25 Happy Islamic birthday!
+
+and would appear in the diary for any date that corresponds to Dhu
+al-Qada 25 on the Islamic calendar.
+
+ As with Gregorian-date diary entries, Hebrew- and Islamic-date
+entries are nonmarking if they are preceded with an ampersand (`&').
+
+ Here is a table of commands used in the calendar to create diary
+entries that match the selected date and other dates that are similar
+in the Hebrew or Islamic calendar:
+
+`i h d'
+ Add a diary entry for the Hebrew date corresponding to the
+ selected date (`insert-hebrew-diary-entry').
+
+`i h m'
+ Add a diary entry for the day of the Hebrew month corresponding to
+ the selected date (`insert-monthly-hebrew-diary-entry'). This
+ diary entry matches any date that has the same Hebrew
+ day-within-month as the selected date.
+
+`i h y'
+ Add a diary entry for the day of the Hebrew year corresponding to
+ the selected date (`insert-yearly-hebrew-diary-entry'). This diary
+ entry matches any date which has the same Hebrew month and
+ day-within-month as the selected date.
+
+`i i d'
+ Add a diary entry for the Islamic date corresponding to the
+ selected date (`insert-islamic-diary-entry').
+
+`i i m'
+ Add a diary entry for the day of the Islamic month corresponding
+ to the selected date (`insert-monthly-islamic-diary-entry').
+
+`i i y'
+ Add a diary entry for the day of the Islamic year corresponding to
+ the selected date (`insert-yearly-islamic-diary-entry').
+
+ These commands work much like the corresponding commands for ordinary
+diary entries: they apply to the date that point is on in the calendar
+window, and what they do is insert just the date portion of a diary
+entry at the end of your diary file. You must then insert the rest of
+the diary entry.
+
+\1f
File: xemacs.info, Node: Fancy Diary Display, Next: Included Diary Files, Prev: Hebrew/Islamic Entries, Up: Calendar Customization
Fancy Diary Display
If you use the fancy diary display, you can use the normal hook
`list-diary-entries-hook' to sort each day's diary entries by their
-time of day. Add this line to your `.emacs' file:
+time of day. Add this line to your init file:
(add-hook 'list-diary-entries-hook 'sort-diary-entries t)
+ *Note Init File::.
+
For each day, this sorts diary entries that begin with a recognizable
time of day according to their times. Diary entries without times come
first within each day.
directory, the directories in the list `exec-path' are searched; this
list is initialized based on the `PATH' environment variable when you
start XEmacs. You can override either or both of these default
-initializations in your `.emacs' file.
+initializations in your init file. *Note Init File::.
When you use `M-!' and `M-|', XEmacs has to wait until the shell
command completes. You can quit with `C-g'; that terminates the shell
command.
-\1f
-File: xemacs.info, Node: Interactive Shell, Next: Shell Mode, Prev: Single Shell, Up: Shell
-
-Interactive Inferior Shell
---------------------------
-
- To run a subshell interactively with its typescript in an XEmacs
-buffer, use `M-x shell'. This creates (or reuses) a buffer named
-`*shell*' and runs a subshell with input coming from and output going
-to that buffer. That is to say, any "terminal output" from the subshell
-will go into the buffer, advancing point, and any "terminal input" for
-the subshell comes from text in the buffer. To give input to the
-subshell, go to the end of the buffer and type the input, terminated by
-<RET>.
-
- XEmacs does not wait for the subshell to do anything. You can switch
-windows or buffers and edit them while the shell is waiting, or while
-it is running a command. Output from the subshell waits until XEmacs
-has time to process it; this happens whenever XEmacs is waiting for
-keyboard input or for time to elapse.
-
- To get multiple subshells, change the name of buffer `*shell*' to
-something different by using `M-x rename-buffer'. The next use of `M-x
-shell' creates a new buffer `*shell*' with its own subshell. By
-renaming this buffer as well you can create a third one, and so on.
-All the subshells run independently and in parallel.
-
- The file name used to load the subshell is the value of the variable
-`explicit-shell-file-name', if that is non-`nil'. Otherwise, the
-environment variable `ESHELL' is used, or the environment variable
-`SHELL' if there is no `ESHELL'. If the file name specified is
-relative, the directories in the list `exec-path' are searched (*note
-Single Shell Commands: Single Shell.).
-
- As soon as the subshell is started, it is sent as input the contents
-of the file `~/.emacs_SHELLNAME', if that file exists, where SHELLNAME
-is the name of the file that the shell was loaded from. For example,
-if you use `csh', the file sent to it is `~/.emacs_csh'.
-
- `cd', `pushd', and `popd' commands given to the inferior shell are
-watched by XEmacs so it can keep the `*shell*' buffer's default
-directory the same as the shell's working directory. These commands
-are recognized syntactically by examining lines of input that are sent.
-If you use aliases for these commands, you can tell XEmacs to
-recognize them also. For example, if the value of the variable
-`shell-pushd-regexp' matches the beginning of a shell command line,
-that line is regarded as a `pushd' command. Change this variable when
-you add aliases for `pushd'. Likewise, `shell-popd-regexp' and
-`shell-cd-regexp' are used to recognize commands with the meaning of
-`popd' and `cd'.
-
- `M-x shell-resync-dirs' queries the shell and resynchronizes XEmacs'
-idea of what the current directory stack is. `M-x
-shell-dirtrack-toggle' turns directory tracking on and off.
-
- XEmacs keeps a history of the most recent commands you have typed in
-the `*shell*' buffer. If you are at the beginning of a shell command
-line and type <M-p>, the previous shell input is inserted into the
-buffer before point. Immediately typing <M-p> again deletes that input
-and inserts the one before it. By repeating <M-p> you can move
-backward through your commands until you find one you want to repeat.
-You may then edit the command before typing <RET> if you wish. <M-n>
-moves forward through the command history, in case you moved backward
-past the one you wanted while using <M-p>. If you type the first few
-characters of a previous command and then type <M-p>, the most recent
-shell input starting with those characters is inserted. This can be
-very convenient when you are repeating a sequence of shell commands.
-The variable `input-ring-size' controls how many commands are saved in
-your input history. The default is 30.
-
-\1f
-File: xemacs.info, Node: Shell Mode, Next: Terminal emulator, Prev: Interactive Shell, Up: Shell
-
-Shell Mode
-----------
-
- The shell buffer uses Shell mode, which defines several special keys
-attached to the `C-c' prefix. They are chosen to resemble the usual
-editing and job control characters present in shells that are not under
-XEmacs, except that you must type `C-c' first. Here is a list of the
-special key bindings of Shell mode:
-
-`<RET>'
- At end of buffer send line as input; otherwise, copy current line
- to end of buffer and send it (`send-shell-input'). When a line is
- copied, any text at the beginning of the line that matches the
- variable `shell-prompt-pattern' is left out; this variable's value
- should be a regexp string that matches the prompts that you use in
- your subshell.
-
-`C-c C-d'
- Send end-of-file as input, probably causing the shell or its
- current subjob to finish (`shell-send-eof').
-
-`C-d'
- If point is not at the end of the buffer, delete the next
- character just like most other modes. If point is at the end of
- the buffer, send end-of-file as input, instead of generating an
- error as in other modes (`comint-delchar-or-maybe-eof').
-
-`C-c C-u'
- Kill all text that has yet to be sent as input
- (`kill-shell-input').
-
-`C-c C-w'
- Kill a word before point (`backward-kill-word').
-
-`C-c C-c'
- Interrupt the shell or its current subjob if any
- (`interrupt-shell-subjob').
-
-`C-c C-z'
- Stop the shell or its current subjob if any (`stop-shell-subjob').
-
-`C-c C-\'
- Send quit signal to the shell or its current subjob if any
- (`quit-shell-subjob').
-
-`C-c C-o'
- Delete last batch of output from shell (`kill-output-from-shell').
-
-`C-c C-r'
- Scroll top of last batch of output to top of window
- (`show-output-from-shell').
-
-`C-c C-y'
- Copy the previous bunch of shell input and insert it into the
- buffer before point (`copy-last-shell-input'). No final newline
- is inserted, and the input copied is not resubmitted until you type
- <RET>.
-
-`M-p'
- Move backward through the input history. Search for a matching
- command if you have typed the beginning of a command
- (`comint-previous-input').
-
-`M-n'
- Move forward through the input history. Useful when you are using
- <M-p> quickly and go past the desired command
- (`comint-next-input').
-
-`<TAB>'
- Complete the file name preceding point (`comint-dynamic-complete').
-
-\1f
-File: xemacs.info, Node: Terminal emulator, Next: Term Mode, Prev: Shell Mode, Up: Shell
-
-Interactive Inferior Shell with Terminal Emulator
--------------------------------------------------
-
- To run a subshell in a terminal emulator, putting its typescript in
-an XEmacs buffer, use `M-x term'. This creates (or reuses) a buffer
-named `*term*' and runs a subshell with input coming from your keyboard
-and output going to that buffer.
-
- All the normal keys that you type are sent without any interpretation
-by XEmacs directly to the subshell, as "terminal input." Any "echo" of
-your input is the responsibility of the subshell. (The exception is
-the terminal escape character, which by default is `C-c'. *note Term
-Mode::.) Any "terminal output" from the subshell goes into the buffer,
-advancing point.
-
- Some programs (such as XEmacs itself) need to control the appearance
-on the terminal screen in detail. They do this by sending special
-control codes. The exact control codes needed vary from terminal to
-terminal, but nowadays most terminals and terminal emulators (including
-xterm) understand the so-called "ANSI escape sequences" (first
-popularized by the Digital's VT100 family of terminal). The term mode
-also understands these escape sequences, and for each control code does
-the appropriate thing to change the buffer so that the appearance of
-the window will match what it would be on a real terminal. Thus you
-can actually run XEmacs inside an XEmacs Term window!
-
- XEmacs does not wait for the subshell to do anything. You can switch
-windows or buffers and edit them while the shell is waiting, or while
-it is running a command. Output from the subshell waits until XEmacs
-has time to process it; this happens whenever XEmacs is waiting for
-keyboard input or for time to elapse.
-
- To make multiple terminal emulators, rename the buffer `*term*' to
-something different using `M-x rename-uniquely', just as with Shell
-mode.
-
- The file name used to load the subshell is determined the same way
-as for Shell mode.
-
- Unlike Shell mode, Term mode does not track the current directory by
-examining your input. Instead, if you use a programmable shell, you
-can have it tell Term what the current directory is. This is done
-automatically by bash for version 1.15 and later.
-
-\1f
-File: xemacs.info, Node: Term Mode, Next: Paging in Term, Prev: Terminal emulator, Up: Shell
-
-Term Mode
----------
-
- Term uses Term mode, which has two input modes: In line mode, Term
-basically acts like Shell mode. *Note Shell Mode::. In Char mode,
-each character is sent directly to the inferior subshell, except for
-the Term escape character, normally `C-c'.
-
- To switch between line and char mode, use these commands:
- findex term-char-mode
-
-`C-c C-k'
- Switch to line mode. Do nothing if already in line mode.
-
-`C-c C-j'
- Switch to char mode. Do nothing if already in char mode.
-
- The following commands are only available in Char mode:
-`C-c C-c'
- Send a literal <C-c> to the sub-shell.
-
-`C-c C-x'
- A prefix command to conveniently access the global <C-x> commands.
- For example, `C-c C-x o' invokes the global binding of `C-x o',
- which is normally `other-window'.
-
-\1f
-File: xemacs.info, Node: Paging in Term, Prev: Term Mode, Up: Shell
-
-Paging in the terminal emulator
--------------------------------
-
- Term mode has a pager feature. When the pager is enabled, term mode
-will pause at the end of each screenful.
-
-`C-c C-q'
- Toggles the pager feature: Disables the pager if it is enabled,
- and vice versa. This works in both line and char modes. If the
- pager enabled, the mode-line contains the word `page'.
-
- If the pager is enabled, and Term receives more than a screenful of
-output since your last input, Term will enter More break mode. This is
-indicated by `**MORE**' in the mode-line. Type a `Space' to display
-the next screenful of output. Type `?' to see your other options. The
-interface is similar to the Unix `more' program.
-
-\1f
-File: xemacs.info, Node: Narrowing, Next: Hardcopy, Prev: Shell, Up: Top
-
-Narrowing
-=========
-
- "Narrowing" means focusing in on some portion of the buffer, making
-the rest temporarily invisible and inaccessible. Cancelling the
-narrowing and making the entire buffer once again visible is called
-"widening". The amount of narrowing in effect in a buffer at any time
-is called the buffer's "restriction".
-
-`C-x n n'
- Narrow down to between point and mark (`narrow-to-region').
-
-`C-x n w'
- Widen to make the entire buffer visible again (`widen').
-
- Narrowing sometimes makes it easier to concentrate on a single
-subroutine or paragraph by eliminating clutter. It can also be used to
-restrict the range of operation of a replace command or repeating
-keyboard macro. The word `Narrow' appears in the mode line whenever
-narrowing is in effect. When you have narrowed to a part of the
-buffer, that part appears to be all there is. You can't see the rest,
-can't move into it (motion commands won't go outside the visible part),
-and can't change it in any way. However, the invisible text is not
-gone; if you save the file, it will be saved.
-
- The primary narrowing command is `C-x n n' (`narrow-to-region'). It
-sets the current buffer's restrictions so that the text in the current
-region remains visible but all text before the region or after the
-region is invisible. Point and mark do not change.
-
- Because narrowing can easily confuse users who do not understand it,
-`narrow-to-region' is normally a disabled command. Attempting to use
-this command asks for confirmation and gives you the option of enabling
-it; once you enable the command, confirmation will no longer be
-required. *Note Disabling::.
-
- To undo narrowing, use `C-x n w' (`widen'). This makes all text in
-the buffer accessible again.
-
- Use the `C-x =' command to get information on what part of the
-buffer you narrowed down. *Note Position Info::.
-
-\1f
-File: xemacs.info, Node: Hardcopy, Next: Recursive Edit, Prev: Narrowing, Up: Top
-
-Hardcopy Output
-===============
-
- The XEmacs commands for making hardcopy derive their names from the
-Unix commands `print' and `lpr'.
-
-`M-x print-buffer'
- Print hardcopy of current buffer using Unix command `print'
- (`lpr -p'). This command adds page headings containing the file
- name and page number.
-
-`M-x lpr-buffer'
- Print hardcopy of current buffer using Unix command `lpr'. This
- command does not add page headings.
-
-`M-x print-region'
- Like `print-buffer', but prints only the current region.
-
-`M-x lpr-region'
- Like `lpr-buffer', but prints only the current region.
-
- All the hardcopy commands pass extra switches to the `lpr' program
-based on the value of the variable `lpr-switches'. Its value should be
-a list of strings, each string a switch starting with `-'. For
-example, the value could be `("-Pfoo")' to print on printer `foo'.
-
-\1f
-File: xemacs.info, Node: Recursive Edit, Next: Dissociated Press, Prev: Hardcopy, Up: Top
-
-Recursive Editing Levels
-========================
-
- A "recursive edit" is a situation in which you are using XEmacs
-commands to perform arbitrary editing while in the middle of another
-XEmacs command. For example, when you type `C-r' inside a
-`query-replace', you enter a recursive edit in which you can change the
-current buffer. When you exit from the recursive edit, you go back to
-the `query-replace'.
-
- "Exiting" a recursive edit means returning to the unfinished
-command, which continues execution. For example, exiting the recursive
-edit requested by `C-r' in `query-replace' causes query replacing to
-resume. Exiting is done with `C-M-c' (`exit-recursive-edit').
-
- You can also "abort" a recursive edit. This is like exiting, but
-also quits the unfinished command immediately. Use the command `C-]'
-(`abort-recursive-edit') for this. *Note Quitting::.
-
- The mode line shows you when you are in a recursive edit by
-displaying square brackets around the parentheses that always surround
-the major and minor mode names. Every window's mode line shows the
-square brackets, since XEmacs as a whole, rather than any particular
-buffer, is in a recursive edit.
-
- It is possible to be in recursive edits within recursive edits. For
-example, after typing `C-r' in a `query-replace', you might type a
-command that entered the debugger. In such a case, two or more sets of
-square brackets appear in the mode line(s). Exiting the inner
-recursive edit (here with the debugger `c' command) resumes the
-query-replace command where it called the debugger. After the end of
-the query-replace command, you would be able to exit the first
-recursive edit. Aborting exits only one level of recursive edit; it
-returns to the command level of the previous recursive edit. You can
-then abort that one as well.
-
- The command `M-x top-level' aborts all levels of recursive edits,
-returning immediately to the top level command reader.
-
- The text you edit inside the recursive edit need not be the same text
-that you were editing at top level. If the command that invokes the
-recursive edit selects a different buffer first, that is the buffer you
-will edit recursively. You can switch buffers within the recursive edit
-in the normal manner (as long as the buffer-switching keys have not been
-rebound). While you could theoretically do the rest of your editing
-inside the recursive edit, including visiting files, this could have
-surprising effects (such as stack overflow) from time to time. It is
-best if you always exit or abort a recursive edit when you no longer
-need it.
-
- In general, XEmacs tries to avoid using recursive edits. It is
-usually preferable to allow users to switch among the possible editing
-modes in any order they like. With recursive edits, the only way to get
-to another state is to go "back" to the state that the recursive edit
-was invoked from.
-
-\1f
-File: xemacs.info, Node: Dissociated Press, Next: CONX, Prev: Recursive Edit, Up: Top
-
-Dissociated Press
-=================
-
- `M-x dissociated-press' is a command for scrambling a file of text
-either word by word or character by character. Starting from a buffer
-of straight English, it produces extremely amusing output. The input
-comes from the current XEmacs buffer. Dissociated Press writes its
-output in a buffer named `*Dissociation*', and redisplays that buffer
-after every couple of lines (approximately) to facilitate reading it.
-
- `dissociated-press' asks every so often whether to continue
-operating. Answer `n' to stop it. You can also stop at any time by
-typing `C-g'. The dissociation output remains in the `*Dissociation*'
-buffer for you to copy elsewhere if you wish.
-
- Dissociated Press operates by jumping at random from one point in the
-buffer to another. In order to produce plausible output rather than
-gibberish, it insists on a certain amount of overlap between the end of
-one run of consecutive words or characters and the start of the next.
-That is, if it has just printed out `president' and then decides to
-jump to a different point in the file, it might spot the `ent' in
-`pentagon' and continue from there, producing `presidentagon'. Long
-sample texts produce the best results.
-
- A positive argument to `M-x dissociated-press' tells it to operate
-character by character, and specifies the number of overlap characters.
-A negative argument tells it to operate word by word and specifies the
-number of overlap words. In this mode, whole words are treated as the
-elements to be permuted, rather than characters. No argument is
-equivalent to an argument of two. For your againformation, the output
-goes only into the buffer `*Dissociation*'. The buffer you start with
-is not changed.
-
- Dissociated Press produces nearly the same results as a Markov chain
-based on a frequency table constructed from the sample text. It is,
-however, an independent, ignoriginal invention. Dissociated Press
-techniquitously copies several consecutive characters from the sample
-between random choices, whereas a Markov chain would choose randomly for
-each word or character. This makes for more plausible sounding results
-and runs faster.
-
- It is a mustatement that too much use of Dissociated Press can be a
-developediment to your real work. Sometimes to the point of outragedy.
-And keep dissociwords out of your documentation, if you want it to be
-well userenced and properbose. Have fun. Your buggestions are welcome.
-
-\1f
-File: xemacs.info, Node: CONX, Next: Amusements, Prev: Dissociated Press, Up: Top
-
-CONX
-====
-
- Besides producing a file of scrambled text with Dissociated Press,
-you can generate random sentences by using CONX.
-
-`M-x conx'
- Generate random sentences in the `*conx*' buffer.
-
-`M-x conx-buffer'
- Absorb the text in the current buffer into the `conx' database.
-
-`M-x conx-init'
- Forget the current word-frequency tree.
-
-`M-x conx-load'
- Load a `conx' database that has been previously saved with `M-x
- conx-save'.
-
-`M-x conx-region'
- Absorb the text in the current buffer into the `conx' database.
-
-`M-x conx-save'
- Save the current `conx' database to a file for future retrieval.
-
- Copy text from a buffer using `M-x conx-buffer' or `M-x conx-region'
-and then type `M-x conx'. Output is continuously generated until you
-type <^G>. You can save the `conx' database to a file with `M-x
-conx-save', which you can retrieve with `M-x conx-load'. To clear the
-database, use `M-x conx-init'.
-
-\1f
-File: xemacs.info, Node: Amusements, Next: Emulation, Prev: CONX, Up: Top
-
-Other Amusements
-================
-
- If you are a little bit bored, you can try `M-x hanoi'. If you are
-considerably bored, give it a numeric argument. If you are very, very
-bored, try an argument of 9. Sit back and watch.
-
- When you are frustrated, try the famous Eliza program. Just do `M-x
-doctor'. End each input by typing `RET' twice.
-
- When you are feeling strange, type `M-x yow'.
-
-\1f
-File: xemacs.info, Node: Emulation, Next: Customization, Prev: Amusements, Up: Top
-
-Emulation
-=========
-
- XEmacs can be programmed to emulate (more or less) most other
-editors. Standard facilities can emulate these:
-
-Viper (a vi emulator)
- In XEmacs, Viper is the preferred emulation of vi within XEmacs.
- Viper is designed to allow you to take advantage of the best
- features of XEmacs while still doing your basic editing in a
- familiar, vi-like fashion. Viper provides various different
- levels of vi emulation, from a quite complete emulation that
- allows almost no access to native XEmacs commands, to an "expert"
- mode that combines the most useful vi commands with the most
- useful XEmacs commands.
-
- To start Viper, put the command
-
- (viper-mode)
-
- in your `.emacs' file.
-
- Viper comes with a separate manual that is provided standard with
- the XEmacs distribution.
-
-EDT (DEC VMS editor)
- Turn on EDT emulation with `M-x edt-emulation-on'. `M-x
- edt-emulation-off' restores normal Emacs command bindings.
-
- Most of the EDT emulation commands are keypad keys, and most
- standard Emacs key bindings are still available. The EDT
- emulation rebindings are done in the global keymap, so there is no
- problem switching buffers or major modes while in EDT emulation.
-
-Gosling Emacs
- Turn on emulation of Gosling Emacs (aka Unipress Emacs) with `M-x
- set-gosmacs-bindings'. This redefines many keys, mostly on the
- `C-x' and `ESC' prefixes, to work as they do in Gosmacs. `M-x
- set-gnu-bindings' returns to normal XEmacs by rebinding the same
- keys to the definitions they had at the time `M-x
- set-gosmacs-bindings' was done.
-
- It is also possible to run Mocklisp code written for Gosling Emacs.
- *Note Mocklisp::.
-
-\1f
-File: xemacs.info, Node: Customization, Next: Quitting, Prev: Emulation, Up: Top
-
-Customization
-*************
-
- This chapter talks about various topics relevant to adapting the
-behavior of Emacs in minor ways.
-
- All kinds of customization affect only the particular Emacs job that
-you do them in. They are completely lost when you kill the Emacs job,
-and have no effect on other Emacs jobs you may run at the same time or
-later. The only way an Emacs job can affect anything outside of it is
-by writing a file; in particular, the only way to make a customization
-`permanent' is to put something in your `.emacs' file or other
-appropriate file to do the customization in each session. *Note Init
-File::.
-
-* Menu:
-
-* Minor Modes:: Each minor mode is one feature you can turn on
- independently of any others.
-* Variables:: Many Emacs commands examine Emacs variables
- to decide what to do; by setting variables,
- you can control their functioning.
-* Keyboard Macros:: A keyboard macro records a sequence of keystrokes
- to be replayed with a single command.
-* Key Bindings:: The keymaps say what command each key runs.
- By changing them, you can "redefine keys".
-* Syntax:: The syntax table controls how words and expressions
- are parsed.
-* Init File:: How to write common customizations in the `.emacs'
- file.
-* Audible Bell:: Changing how Emacs sounds the bell.
-* Faces:: Changing the fonts and colors of a region of text.
-* X Resources:: X resources controlling various aspects of the
- behavior of XEmacs.
-
-\1f
-File: xemacs.info, Node: Minor Modes, Next: Variables, Up: Customization
-
-Minor Modes
-===========
-
- Minor modes are options which you can use or not. For example, Auto
-Fill mode is a minor mode in which <SPC> breaks lines between words as
-you type. All the minor modes are independent of each other and of the
-selected major mode. Most minor modes inform you in the mode line when
-they are on; for example, `Fill' in the mode line means that Auto Fill
-mode is on.
-
- Append `-mode' to the name of a minor mode to get the name of a
-command function that turns the mode on or off. Thus, the command to
-enable or disable Auto Fill mode is called `M-x auto-fill-mode'. These
-commands are usually invoked with `M-x', but you can bind keys to them
-if you wish. With no argument, the function turns the mode on if it was
-off and off if it was on. This is known as "toggling". A positive
-argument always turns the mode on, and an explicit zero argument or a
-negative argument always turns it off.
-
- Auto Fill mode allows you to enter filled text without breaking lines
-explicitly. Emacs inserts newlines as necessary to prevent lines from
-becoming too long. *Note Filling::.
-
- Overwrite mode causes ordinary printing characters to replace
-existing text instead of moving it to the right. For example, if point
-is in front of the `B' in `FOOBAR', and you type a `G' in Overwrite
-mode, it changes to `FOOGAR', instead of `FOOGBAR'.
-
- Abbrev mode allows you to define abbreviations that automatically
-expand as you type them. For example, `amd' might expand to `abbrev
-mode'. *Note Abbrevs::, for full information.
-
-\1f
-File: xemacs.info, Node: Variables, Next: Keyboard Macros, Prev: Minor Modes, Up: Customization
-
-Variables
-=========
-
- A "variable" is a Lisp symbol which has a value. Variable names can
-contain any characters, but by convention they are words separated by
-hyphens. A variable can also have a documentation string, which
-describes what kind of value it should have and how the value will be
-used.
-
- Lisp allows any variable to have any kind of value, but most
-variables that Emacs uses require a value of a certain type. Often the
-value has to be a string or a number. Sometimes we say that a certain
-feature is turned on if a variable is "non-`nil'," meaning that if the
-variable's value is `nil', the feature is off, but the feature is on
-for any other value. The conventional value to turn on the
-feature--since you have to pick one particular value when you set the
-variable--is `t'.
-
- Emacs uses many Lisp variables for internal recordkeeping, as any
-Lisp program must, but the most interesting variables for you are the
-ones that exist for the sake of customization. Emacs does not
-(usually) change the values of these variables; instead, you set the
-values, and thereby alter and control the behavior of certain Emacs
-commands. These variables are called "options". Most options are
-documented in this manual and appear in the Variable Index (*note
-Variable Index::).
-
- One example of a variable which is an option is `fill-column', which
-specifies the position of the right margin (as a number of characters
-from the left margin) to be used by the fill commands (*note Filling::).
-
-* Menu:
-
-* Examining:: Examining or setting one variable's value.
-* Easy Customization:: Convenient and easy customization of variables.
-* Edit Options:: Examining or editing list of all variables' values.
-* Locals:: Per-buffer values of variables.
-* File Variables:: How files can specify variable values.
-
-\1f
-File: xemacs.info, Node: Examining, Next: Easy Customization, Up: Variables
-
-Examining and Setting Variables
--------------------------------
-
-`C-h v'
-`M-x describe-variable'
- Print the value and documentation of a variable.
-
-`M-x set-variable'
- Change the value of a variable.
-
- To examine the value of a single variable, use `C-h v'
-(`describe-variable'), which reads a variable name using the
-minibuffer, with completion. It prints both the value and the
-documentation of the variable.
-
- C-h v fill-column <RET>
-
-prints something like:
-
- fill-column's value is 75
-
- Documentation:
- *Column beyond which automatic line-wrapping should happen.
- Automatically becomes local when set in any fashion.
-
-The star at the beginning of the documentation indicates that this
-variable is an option. `C-h v' is not restricted to options; it allows
-any variable name.
-
- If you know which option you want to set, you can use `M-x
-set-variable' to set it. This prompts for the variable name in the
-minibuffer (with completion), and then prompts for a Lisp expression
-for the new value using the minibuffer a second time. For example,
-
- M-x set-variable <RET> fill-column <RET> 75 <RET>
-
-sets `fill-column' to 75, as if you had executed the Lisp expression
-`(setq fill-column 75)'.
-
- Setting variables in this way, like all means of customizing Emacs
-except where explicitly stated, affects only the current Emacs session.
-
-\1f
-File: xemacs.info, Node: Easy Customization, Next: Edit Options, Prev: Examining, Up: Variables
-
-Easy Customization Interface
-----------------------------
-
- A convenient way to find the user option variables that you want to
-change, and then change them, is with `M-x customize'. This command
-creates a "customization buffer" with which you can browse through the
-Emacs user options in a logically organized structure, then edit and
-set their values. You can also use the customization buffer to save
-settings permanently. (Not all Emacs user options are included in this
-structure as of yet, but we are adding the rest.)
-
-* Menu:
-
-* Groups: Customization Groups.
- How options are classified in a structure.
-* Changing an Option:: How to edit a value and set an option.
-* Face Customization:: How to edit the attributes of a face.
-* Specific Customization:: Making a customization buffer for specific
- options, faces, or groups.
-
-\1f
-File: xemacs.info, Node: Customization Groups, Next: Changing an Option, Up: Easy Customization
-
-Customization Groups
-....................
-
- For customization purposes, user options are organized into "groups"
-to help you find them. Groups are collected into bigger groups, all
-the way up to a master group called `Emacs'.
-
- `M-x customize' creates a customization buffer that shows the
-top-level `Emacs' group and the second-level groups immediately under
-it. It looks like this, in part:
-
- /- Emacs group: ---------------------------------------------------\
- [State]: visible group members are all at standard settings.
- Customization of the One True Editor.
- See also [Manual].
-
- [Open] Editing group
- Basic text editing facilities.
-
- [Open] External group
- Interfacing to external utilities.
-
- MORE SECOND-LEVEL GROUPS
-
- \- Emacs group end ------------------------------------------------/
-
-This says that the buffer displays the contents of the `Emacs' group.
-The other groups are listed because they are its contents. But they
-are listed differently, without indentation and dashes, because _their_
-contents are not included. Each group has a single-line documentation
-string; the `Emacs' group also has a `[State]' line.
-
- Most of the text in the customization buffer is read-only, but it
-typically includes some "editable fields" that you can edit. There are
-also "active fields"; this means a field that does something when you
-"invoke" it. To invoke an active field, either click on it with
-`Mouse-1', or move point to it and type <RET>.
-
- For example, the phrase `[Open]' that appears in a second-level
-group is an active field. Invoking the `[Open]' field for a group
-opens up a new customization buffer, which shows that group and its
-contents. This field is a kind of hypertext link to another group.
-
- The `Emacs' group does not include any user options itself, but
-other groups do. By examining various groups, you will eventually find
-the options and faces that belong to the feature you are interested in
-customizing. Then you can use the customization buffer to set them.
-
- You can view the structure of customization groups on a larger scale
-with `M-x customize-browse'. This command creates a special kind of
-customization buffer which shows only the names of the groups (and
-options and faces), and their structure.
-
- In this buffer, you can show the contents of a group by invoking
-`[+]'. When the group contents are visible, this button changes to
-`[-]'; invoking that hides the group contents.
-
- Each group, option or face name in this buffer has an active field
-which says `[Group]', `[Option]' or `[Face]'. Invoking that active
-field creates an ordinary customization buffer showing just that group
-and its contents, just that option, or just that face. This is the way
-to set values in it.
-
projects / chise / xemacs-chise.git- / blobdiff