translation approved by the author instead of in the original English.
\1f
+File: xemacs.info, Node: Interactive Shell, Next: Shell Mode, Prev: Single Shell, Up: Shell
+
+Interactive Inferior Shell
+--------------------------
+
+ To run a subshell interactively with its typescript in an XEmacs
+buffer, use `M-x shell'. This creates (or reuses) a buffer named
+`*shell*' and runs a subshell with input coming from and output going
+to that buffer. That is to say, any "terminal output" from the subshell
+will go into the buffer, advancing point, and any "terminal input" for
+the subshell comes from text in the buffer. To give input to the
+subshell, go to the end of the buffer and type the input, terminated by
+<RET>.
+
+ XEmacs does not wait for the subshell to do anything. You can switch
+windows or buffers and edit them while the shell is waiting, or while
+it is running a command. Output from the subshell waits until XEmacs
+has time to process it; this happens whenever XEmacs is waiting for
+keyboard input or for time to elapse.
+
+ To get multiple subshells, change the name of buffer `*shell*' to
+something different by using `M-x rename-buffer'. The next use of `M-x
+shell' creates a new buffer `*shell*' with its own subshell. By
+renaming this buffer as well you can create a third one, and so on.
+All the subshells run independently and in parallel.
+
+ The file name used to load the subshell is the value of the variable
+`explicit-shell-file-name', if that is non-`nil'. Otherwise, the
+environment variable `ESHELL' is used, or the environment variable
+`SHELL' if there is no `ESHELL'. If the file name specified is
+relative, the directories in the list `exec-path' are searched (*note
+Single Shell Commands: Single Shell.).
+
+ As soon as the subshell is started, it is sent as input the contents
+of the file `~/.emacs_SHELLNAME', if that file exists, where SHELLNAME
+is the name of the file that the shell was loaded from. For example,
+if you use `csh', the file sent to it is `~/.emacs_csh'.
+
+ `cd', `pushd', and `popd' commands given to the inferior shell are
+watched by XEmacs so it can keep the `*shell*' buffer's default
+directory the same as the shell's working directory. These commands
+are recognized syntactically by examining lines of input that are sent.
+If you use aliases for these commands, you can tell XEmacs to
+recognize them also. For example, if the value of the variable
+`shell-pushd-regexp' matches the beginning of a shell command line,
+that line is regarded as a `pushd' command. Change this variable when
+you add aliases for `pushd'. Likewise, `shell-popd-regexp' and
+`shell-cd-regexp' are used to recognize commands with the meaning of
+`popd' and `cd'.
+
+ `M-x shell-resync-dirs' queries the shell and resynchronizes XEmacs'
+idea of what the current directory stack is. `M-x
+shell-dirtrack-toggle' turns directory tracking on and off.
+
+ XEmacs keeps a history of the most recent commands you have typed in
+the `*shell*' buffer. If you are at the beginning of a shell command
+line and type <M-p>, the previous shell input is inserted into the
+buffer before point. Immediately typing <M-p> again deletes that input
+and inserts the one before it. By repeating <M-p> you can move
+backward through your commands until you find one you want to repeat.
+You may then edit the command before typing <RET> if you wish. <M-n>
+moves forward through the command history, in case you moved backward
+past the one you wanted while using <M-p>. If you type the first few
+characters of a previous command and then type <M-p>, the most recent
+shell input starting with those characters is inserted. This can be
+very convenient when you are repeating a sequence of shell commands.
+The variable `input-ring-size' controls how many commands are saved in
+your input history. The default is 30.
+
+\1f
+File: xemacs.info, Node: Shell Mode, Next: Terminal emulator, Prev: Interactive Shell, Up: Shell
+
+Shell Mode
+----------
+
+ The shell buffer uses Shell mode, which defines several special keys
+attached to the `C-c' prefix. They are chosen to resemble the usual
+editing and job control characters present in shells that are not under
+XEmacs, except that you must type `C-c' first. Here is a list of the
+special key bindings of Shell mode:
+
+`<RET>'
+ At end of buffer send line as input; otherwise, copy current line
+ to end of buffer and send it (`send-shell-input'). When a line is
+ copied, any text at the beginning of the line that matches the
+ variable `shell-prompt-pattern' is left out; this variable's value
+ should be a regexp string that matches the prompts that you use in
+ your subshell.
+
+`C-c C-d'
+ Send end-of-file as input, probably causing the shell or its
+ current subjob to finish (`shell-send-eof').
+
+`C-d'
+ If point is not at the end of the buffer, delete the next
+ character just like most other modes. If point is at the end of
+ the buffer, send end-of-file as input, instead of generating an
+ error as in other modes (`comint-delchar-or-maybe-eof').
+
+`C-c C-u'
+ Kill all text that has yet to be sent as input
+ (`kill-shell-input').
+
+`C-c C-w'
+ Kill a word before point (`backward-kill-word').
+
+`C-c C-c'
+ Interrupt the shell or its current subjob if any
+ (`interrupt-shell-subjob').
+
+`C-c C-z'
+ Stop the shell or its current subjob if any (`stop-shell-subjob').
+
+`C-c C-\'
+ Send quit signal to the shell or its current subjob if any
+ (`quit-shell-subjob').
+
+`C-c C-o'
+ Delete last batch of output from shell (`kill-output-from-shell').
+
+`C-c C-r'
+ Scroll top of last batch of output to top of window
+ (`show-output-from-shell').
+
+`C-c C-y'
+ Copy the previous bunch of shell input and insert it into the
+ buffer before point (`copy-last-shell-input'). No final newline
+ is inserted, and the input copied is not resubmitted until you type
+ <RET>.
+
+`M-p'
+ Move backward through the input history. Search for a matching
+ command if you have typed the beginning of a command
+ (`comint-previous-input').
+
+`M-n'
+ Move forward through the input history. Useful when you are using
+ <M-p> quickly and go past the desired command
+ (`comint-next-input').
+
+`<TAB>'
+ Complete the file name preceding point (`comint-dynamic-complete').
+
+\1f
+File: xemacs.info, Node: Terminal emulator, Next: Term Mode, Prev: Shell Mode, Up: Shell
+
+Interactive Inferior Shell with Terminal Emulator
+-------------------------------------------------
+
+ To run a subshell in a terminal emulator, putting its typescript in
+an XEmacs buffer, use `M-x term'. This creates (or reuses) a buffer
+named `*term*' and runs a subshell with input coming from your keyboard
+and output going to that buffer.
+
+ All the normal keys that you type are sent without any interpretation
+by XEmacs directly to the subshell, as "terminal input." Any "echo" of
+your input is the responsibility of the subshell. (The exception is
+the terminal escape character, which by default is `C-c'. *note Term
+Mode::.) Any "terminal output" from the subshell goes into the buffer,
+advancing point.
+
+ Some programs (such as XEmacs itself) need to control the appearance
+on the terminal screen in detail. They do this by sending special
+control codes. The exact control codes needed vary from terminal to
+terminal, but nowadays most terminals and terminal emulators (including
+xterm) understand the so-called "ANSI escape sequences" (first
+popularized by the Digital's VT100 family of terminal). The term mode
+also understands these escape sequences, and for each control code does
+the appropriate thing to change the buffer so that the appearance of
+the window will match what it would be on a real terminal. Thus you
+can actually run XEmacs inside an XEmacs Term window!
+
+ XEmacs does not wait for the subshell to do anything. You can switch
+windows or buffers and edit them while the shell is waiting, or while
+it is running a command. Output from the subshell waits until XEmacs
+has time to process it; this happens whenever XEmacs is waiting for
+keyboard input or for time to elapse.
+
+ To make multiple terminal emulators, rename the buffer `*term*' to
+something different using `M-x rename-uniquely', just as with Shell
+mode.
+
+ The file name used to load the subshell is determined the same way
+as for Shell mode.
+
+ Unlike Shell mode, Term mode does not track the current directory by
+examining your input. Instead, if you use a programmable shell, you
+can have it tell Term what the current directory is. This is done
+automatically by bash for version 1.15 and later.
+
+\1f
+File: xemacs.info, Node: Term Mode, Next: Paging in Term, Prev: Terminal emulator, Up: Shell
+
+Term Mode
+---------
+
+ Term uses Term mode, which has two input modes: In line mode, Term
+basically acts like Shell mode. *Note Shell Mode::. In Char mode,
+each character is sent directly to the inferior subshell, except for
+the Term escape character, normally `C-c'.
+
+ To switch between line and char mode, use these commands:
+ findex term-char-mode
+
+`C-c C-k'
+ Switch to line mode. Do nothing if already in line mode.
+
+`C-c C-j'
+ Switch to char mode. Do nothing if already in char mode.
+
+ The following commands are only available in Char mode:
+`C-c C-c'
+ Send a literal <C-c> to the sub-shell.
+
+`C-c C-x'
+ A prefix command to conveniently access the global <C-x> commands.
+ For example, `C-c C-x o' invokes the global binding of `C-x o',
+ which is normally `other-window'.
+
+\1f
File: xemacs.info, Node: Paging in Term, Prev: Term Mode, Up: Shell
Paging in the terminal emulator
(viper-mode)
- in your `.emacs' file.
+ in your init file. *Note Init File::.
Viper comes with a separate manual that is provided standard with
the XEmacs distribution.
and have no effect on other Emacs jobs you may run at the same time or
later. The only way an Emacs job can affect anything outside of it is
by writing a file; in particular, the only way to make a customization
-`permanent' is to put something in your `.emacs' file or other
-appropriate file to do the customization in each session. *Note Init
-File::.
+`permanent' is to put something in your init file or other appropriate
+file to do the customization in each session. *Note Init File::.
* Menu:
By changing them, you can "redefine keys".
* Syntax:: The syntax table controls how words and expressions
are parsed.
-* Init File:: How to write common customizations in the `.emacs'
- file.
+* Init File:: How to write common customizations in the init file.
* Audible Bell:: Changing how Emacs sounds the bell.
* Faces:: Changing the fonts and colors of a region of text.
* Frame Components:: Controlling the presence and positions of the
Setting the option changes its value in the current Emacs session;
"saving" the value changes it for future sessions as well. This works
-by writing code into your `~/.emacs' file so as to set the option
-variable again each time you start Emacs. To save the option, invoke
-`[State]' and select the `Save for Future Sessions' operation.
+by writing code into your init file so as to set the option variable
+again each time you start Emacs. *Note Init File::. To save the
+option, invoke `[State]' and select the `Save for Future Sessions'
+operation.
You can also restore the option to its standard value by invoking
`[State]' and selecting the `Reset' operation. There are actually
(default-value 'fill-column)
-\1f
-File: xemacs.info, Node: File Variables, Prev: Locals, Up: Variables
-
-Local Variables in Files
-------------------------
-
- A file can contain a "local variables list", which specifies the
-values to use for certain Emacs variables when that file is edited.
-Visiting the file checks for a local variables list and makes each
-variable in the list local to the buffer in which the file is visited,
-with the value specified in the file.
-
- A local variables list goes near the end of the file, in the last
-page. (It is often best to put it on a page by itself.) The local
-variables list starts with a line containing the string `Local
-Variables:', and ends with a line containing the string `End:'. In
-between come the variable names and values, one set per line, as
-`VARIABLE: VALUE'. The VALUEs are not evaluated; they are used
-literally.
-
- The line which starts the local variables list does not have to say
-just `Local Variables:'. If there is other text before `Local
-Variables:', that text is called the "prefix", and if there is other
-text after, that is called the "suffix". If a prefix or suffix are
-present, each entry in the local variables list should have the prefix
-before it and the suffix after it. This includes the `End:' line. The
-prefix and suffix are included to disguise the local variables list as
-a comment so the compiler or text formatter will ignore it. If you do
-not need to disguise the local variables list as a comment in this way,
-there is no need to include a prefix or a suffix.
-
- Two "variable" names are special in a local variables list: a value
-for the variable `mode' sets the major mode, and a value for the
-variable `eval' is simply evaluated as an expression and the value is
-ignored. These are not real variables; setting them in any other
-context does not have the same effect. If `mode' is used in a local
-variables list, it should be the first entry in the list.
-
- Here is an example of a local variables list:
- ;;; Local Variables: ***
- ;;; mode:lisp ***
- ;;; comment-column:0 ***
- ;;; comment-start: ";;; " ***
- ;;; comment-end:"***" ***
- ;;; End: ***
-
- Note that the prefix is `;;; ' and the suffix is ` ***'. Note also
-that comments in the file begin with and end with the same strings.
-Presumably the file contains code in a language which is enough like
-Lisp for Lisp mode to be useful but in which comments start and end
-differently. The prefix and suffix are used in the local variables
-list to make the list look like several lines of comments when the
-compiler or interpreter for that language reads the file.
-
- The start of the local variables list must be no more than 3000
-characters from the end of the file, and must be in the last page if the
-file is divided into pages. Otherwise, Emacs will not notice it is
-there. The purpose is twofold: a stray `Local Variables:' not in the
-last page does not confuse Emacs, and Emacs never needs to search a
-long file that contains no page markers and has no local variables list.
-
- You may be tempted to turn on Auto Fill mode with a local variable
-list. That is inappropriate. Whether you use Auto Fill mode or not is
-a matter of personal taste, not a matter of the contents of particular
-files. If you want to use Auto Fill, set up major mode hooks with your
-`.emacs' file to turn it on (when appropriate) for you alone (*note
-Init File::). Don't try to use a local variable list that would impose
-your taste on everyone working with the file.
-
- XEmacs allows you to specify local variables in the first line of a
-file, in addition to specifying them in the `Local Variables' section
-at the end of a file.
-
- If the first line of a file contains two occurrences of ``-*-'',
-XEmacs uses the information between them to determine what the major
-mode and variable settings should be. For example, these are all legal:
-
- ;;; -*- mode: emacs-lisp -*-
- ;;; -*- mode: postscript; version-control: never -*-
- ;;; -*- tags-file-name: "/foo/bar/TAGS" -*-
-
- For historical reasons, the syntax ``-*- modename -*-'' is allowed
-as well; for example, you can use:
-
- ;;; -*- emacs-lisp -*-
-
- The variable `enable-local-variables' controls the use of local
-variables lists in files you visit. The value can be `t', `nil', or
-something else. A value of `t' means local variables lists are obeyed;
-`nil' means they are ignored; anything else means query.
-
- The command `M-x normal-mode' always obeys local variables lists and
-ignores this variable.
-
-\1f
-File: xemacs.info, Node: Keyboard Macros, Next: Key Bindings, Prev: Variables, Up: Customization
-
-Keyboard Macros
-===============
-
- A "keyboard macro" is a command defined by the user to abbreviate a
-sequence of keys. For example, if you discover that you are about to
-type `C-n C-d' forty times, you can speed your work by defining a
-keyboard macro to invoke `C-n C-d' and calling it with a repeat count
-of forty.
-
-`C-x ('
- Start defining a keyboard macro (`start-kbd-macro').
-
-`C-x )'
- End the definition of a keyboard macro (`end-kbd-macro').
-
-`C-x e'
- Execute the most recent keyboard macro (`call-last-kbd-macro').
-
-`C-u C-x ('
- Re-execute last keyboard macro, then add more keys to its
- definition.
-
-`C-x q'
- When this point is reached during macro execution, ask for
- confirmation (`kbd-macro-query').
-
-`M-x name-last-kbd-macro'
- Give a command name (for the duration of the session) to the most
- recently defined keyboard macro.
-
-`M-x insert-kbd-macro'
- Insert in the buffer a keyboard macro's definition, as Lisp code.
-
- Keyboard macros differ from other Emacs commands in that they are
-written in the Emacs command language rather than in Lisp. This makes
-it easier for the novice to write them and makes them more convenient as
-temporary hacks. However, the Emacs command language is not powerful
-enough as a programming language to be useful for writing anything
-general or complex. For such things, Lisp must be used.
-
- You define a keyboard macro by executing the commands which are its
-definition. Put differently, as you are defining a keyboard macro, the
-definition is being executed for the first time. This way, you see
-what the effects of your commands are, and don't have to figure them
-out in your head. When you are finished, the keyboard macro is defined
-and also has been executed once. You can then execute the same set of
-commands again by invoking the macro.
-
-* Menu:
-
-* Basic Kbd Macro:: Defining and running keyboard macros.
-* Save Kbd Macro:: Giving keyboard macros names; saving them in files.
-* Kbd Macro Query:: Keyboard macros that do different things each use.
-
-\1f
-File: xemacs.info, Node: Basic Kbd Macro, Next: Save Kbd Macro, Up: Keyboard Macros
-
-Basic Use
----------
-
- To start defining a keyboard macro, type `C-x ('
-(`start-kbd-macro'). From then on, anything you type continues to be
-executed, but also becomes part of the definition of the macro. `Def'
-appears in the mode line to remind you of what is going on. When you
-are finished, the `C-x )' command (`end-kbd-macro') terminates the
-definition, without becoming part of it.
-
- For example,
-
- C-x ( M-f foo C-x )
-
-defines a macro to move forward a word and then insert `foo'.
-
- You can give `C-x )' a repeat count as an argument, in which case it
-repeats the macro that many times right after defining it, but defining
-the macro counts as the first repetition (since it is executed as you
-define it). If you give `C-x )' an argument of 4, it executes the
-macro immediately 3 additional times. An argument of zero to `C-x e'
-or `C-x )' means repeat the macro indefinitely (until it gets an error
-or you type `C-g').
-
- Once you have defined a macro, you can invoke it again with the `C-x
-e' command (`call-last-kbd-macro'). You can give the command a repeat
-count numeric argument to execute the macro many times.
-
- To repeat an operation at regularly spaced places in the text,
-define a macro and include as part of the macro the commands to move to
-the next place you want to use it. For example, if you want to change
-each line, you should position point at the start of a line, and define
-a macro to change that line and leave point at the start of the next
-line. Repeating the macro will then operate on successive lines.
-
- After you have terminated the definition of a keyboard macro, you
-can add to the end of its definition by typing `C-u C-x ('. This is
-equivalent to plain `C-x (' followed by retyping the whole definition
-so far. As a consequence it re-executes the macro as previously
-defined.
-
-\1f
-File: xemacs.info, Node: Save Kbd Macro, Next: Kbd Macro Query, Prev: Basic Kbd Macro, Up: Keyboard Macros
-
-Naming and Saving Keyboard Macros
----------------------------------
-
- To save a keyboard macro for longer than until you define the next
-one, you must give it a name using `M-x name-last-kbd-macro'. This
-reads a name as an argument using the minibuffer and defines that name
-to execute the macro. The macro name is a Lisp symbol, and defining it
-in this way makes it a valid command name for calling with `M-x' or for
-binding a key to with `global-set-key' (*note Keymaps::). If you
-specify a name that has a prior definition other than another keyboard
-macro, Emacs prints an error message and nothing is changed.
-
- Once a macro has a command name, you can save its definition in a
-file. You can then use it in another editing session. First visit the
-file you want to save the definition in. Then use the command:
-
- M-x insert-kbd-macro <RET> MACRONAME <RET>
-
-This inserts some Lisp code that, when executed later, will define the
-same macro with the same definition it has now. You need not
-understand Lisp code to do this, because `insert-kbd-macro' writes the
-Lisp code for you. Then save the file. You can load the file with
-`load-file' (*note Lisp Libraries::). If the file you save in is your
-initialization file `~/.emacs' (*note Init File::), then the macro will
-be defined each time you run Emacs.
-
- If you give `insert-kbd-macro' a prefix argument, it creates
-additional Lisp code to record the keys (if any) that you have bound to
-the keyboard macro, so that the macro is reassigned the same keys when
-you load the file.
-
projects / chise / xemacs-chise.git / blobdiff