-This is ../info/xemacs.info, produced by makeinfo version 4.0 from
+This is ../info/xemacs.info, produced by makeinfo version 4.0b from
xemacs/xemacs.texi.
INFO-DIR-SECTION XEmacs Editor
translation approved by the author instead of in the original English.
\1f
+File: xemacs.info, Node: Regexps, Next: Search Case, Prev: Regexp Search, Up: Search
+
+Syntax of Regular Expressions
+=============================
+
+ Regular expressions have a syntax in which a few characters are
+special constructs and the rest are "ordinary". An ordinary character
+is a simple regular expression that matches that character and nothing
+else. The special characters are `.', `*', `+', `?', `[', `]', `^',
+`$', and `\'; no new special characters will be defined in the future.
+Any other character appearing in a regular expression is ordinary,
+unless a `\' precedes it.
+
+ For example, `f' is not a special character, so it is ordinary, and
+therefore `f' is a regular expression that matches the string `f' and
+no other string. (It does _not_ match the string `ff'.) Likewise, `o'
+is a regular expression that matches only `o'.
+
+ Any two regular expressions A and B can be concatenated. The result
+is a regular expression that matches a string if A matches some amount
+of the beginning of that string and B matches the rest of the string.
+
+ As a simple example, we can concatenate the regular expressions `f'
+and `o' to get the regular expression `fo', which matches only the
+string `fo'. Still trivial. To do something more powerful, you need
+to use one of the special characters. Here is a list of them:
+
+`. (Period)'
+ is a special character that matches any single character except a
+ newline. Using concatenation, we can make regular expressions
+ like `a.b', which matches any three-character string that begins
+ with `a' and ends with `b'.
+
+`*'
+ is not a construct by itself; it is a quantifying suffix operator
+ that means to repeat the preceding regular expression as many
+ times as possible. In `fo*', the `*' applies to the `o', so `fo*'
+ matches one `f' followed by any number of `o's. The case of zero
+ `o's is allowed: `fo*' does match `f'.
+
+ `*' always applies to the _smallest_ possible preceding
+ expression. Thus, `fo*' has a repeating `o', not a repeating `fo'.
+
+ The matcher processes a `*' construct by matching, immediately, as
+ many repetitions as can be found; it is "greedy". Then it
+ continues with the rest of the pattern. If that fails,
+ backtracking occurs, discarding some of the matches of the
+ `*'-modified construct in case that makes it possible to match the
+ rest of the pattern. For example, in matching `ca*ar' against the
+ string `caaar', the `a*' first tries to match all three `a's; but
+ the rest of the pattern is `ar' and there is only `r' left to
+ match, so this try fails. The next alternative is for `a*' to
+ match only two `a's. With this choice, the rest of the regexp
+ matches successfully.
+
+ Nested repetition operators can be extremely slow if they specify
+ backtracking loops. For example, it could take hours for the
+ regular expression `\(x+y*\)*a' to match the sequence
+ `xxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxz'. The slowness is because
+ Emacs must try each imaginable way of grouping the 35 `x''s before
+ concluding that none of them can work. To make sure your regular
+ expressions run fast, check nested repetitions carefully.
+
+`+'
+ is a quantifying suffix operator similar to `*' except that the
+ preceding expression must match at least once. It is also
+ "greedy". So, for example, `ca+r' matches the strings `car' and
+ `caaaar' but not the string `cr', whereas `ca*r' matches all three
+ strings.
+
+`?'
+ is a quantifying suffix operator similar to `*', except that the
+ preceding expression can match either once or not at all. For
+ example, `ca?r' matches `car' or `cr', but does not match anything
+ else.
+
+`*?'
+ works just like `*', except that rather than matching the longest
+ match, it matches the shortest match. `*?' is known as a
+ "non-greedy" quantifier, a regexp construct borrowed from Perl.
+
+ This construct is very useful for when you want to match the text
+ inside a pair of delimiters. For instance, `/\*.*?\*/' will match
+ C comments in a string. This could not easily be achieved without
+ the use of a non-greedy quantifier.
+
+ This construct has not been available prior to XEmacs 20.4. It is
+ not available in FSF Emacs.
+
+`+?'
+ is the non-greedy version of `+'.
+
+`??'
+ is the non-greedy version of `?'.
+
+`\{n,m\}'
+ serves as an interval quantifier, analogous to `*' or `+', but
+ specifies that the expression must match at least N times, but no
+ more than M times. This syntax is supported by most Unix regexp
+ utilities, and has been introduced to XEmacs for the version 20.3.
+
+ Unfortunately, the non-greedy version of this quantifier does not
+ exist currently, although it does in Perl.
+
+`[ ... ]'
+ `[' begins a "character set", which is terminated by a `]'. In
+ the simplest case, the characters between the two brackets form
+ the set. Thus, `[ad]' matches either one `a' or one `d', and
+ `[ad]*' matches any string composed of just `a's and `d's
+ (including the empty string), from which it follows that `c[ad]*r'
+ matches `cr', `car', `cdr', `caddaar', etc.
+
+ The usual regular expression special characters are not special
+ inside a character set. A completely different set of special
+ characters exists inside character sets: `]', `-' and `^'.
+
+ `-' is used for ranges of characters. To write a range, write two
+ characters with a `-' between them. Thus, `[a-z]' matches any
+ lower case letter. Ranges may be intermixed freely with individual
+ characters, as in `[a-z$%.]', which matches any lower case letter
+ or `$', `%', or a period.
+
+ To include a `]' in a character set, make it the first character.
+ For example, `[]a]' matches `]' or `a'. To include a `-', write
+ `-' as the first character in the set, or put it immediately after
+ a range. (You can replace one individual character C with the
+ range `C-C' to make a place to put the `-'.) There is no way to
+ write a set containing just `-' and `]'.
+
+ To include `^' in a set, put it anywhere but at the beginning of
+ the set.
+
+`[^ ... ]'
+ `[^' begins a "complement character set", which matches any
+ character except the ones specified. Thus, `[^a-z0-9A-Z]' matches
+ all characters _except_ letters and digits.
+
+ `^' is not special in a character set unless it is the first
+ character. The character following the `^' is treated as if it
+ were first (thus, `-' and `]' are not special there).
+
+ Note that a complement character set can match a newline, unless
+ newline is mentioned as one of the characters not to match.
+
+`^'
+ is a special character that matches the empty string, but only at
+ the beginning of a line in the text being matched. Otherwise it
+ fails to match anything. Thus, `^foo' matches a `foo' that occurs
+ at the beginning of a line.
+
+ When matching a string instead of a buffer, `^' matches at the
+ beginning of the string or after a newline character `\n'.
+
+`$'
+ is similar to `^' but matches only at the end of a line. Thus,
+ `x+$' matches a string of one `x' or more at the end of a line.
+
+ When matching a string instead of a buffer, `$' matches at the end
+ of the string or before a newline character `\n'.
+
+`\'
+ has two functions: it quotes the special characters (including
+ `\'), and it introduces additional special constructs.
+
+ Because `\' quotes special characters, `\$' is a regular
+ expression that matches only `$', and `\[' is a regular expression
+ that matches only `[', and so on.
+
+ *Please note:* For historical compatibility, special characters are
+treated as ordinary ones if they are in contexts where their special
+meanings make no sense. For example, `*foo' treats `*' as ordinary
+since there is no preceding expression on which the `*' can act. It is
+poor practice to depend on this behavior; quote the special character
+anyway, regardless of where it appears.
+
+ For the most part, `\' followed by any character matches only that
+character. However, there are several exceptions: characters that,
+when preceded by `\', are special constructs. Such characters are
+always ordinary when encountered on their own. Here is a table of `\'
+constructs:
+
+`\|'
+ specifies an alternative. Two regular expressions A and B with
+ `\|' in between form an expression that matches anything that
+ either A or B matches.
+
+ Thus, `foo\|bar' matches either `foo' or `bar' but no other string.
+
+ `\|' applies to the largest possible surrounding expressions.
+ Only a surrounding `\( ... \)' grouping can limit the grouping
+ power of `\|'.
+
+ Full backtracking capability exists to handle multiple uses of
+ `\|'.
+
+`\( ... \)'
+ is a grouping construct that serves three purposes:
+
+ 1. To enclose a set of `\|' alternatives for other operations.
+ Thus, `\(foo\|bar\)x' matches either `foox' or `barx'.
+
+ 2. To enclose an expression for a suffix operator such as `*' to
+ act on. Thus, `ba\(na\)*' matches `bananana', etc., with any
+ (zero or more) number of `na' strings.
+
+ 3. To record a matched substring for future reference.
+
+ This last application is not a consequence of the idea of a
+ parenthetical grouping; it is a separate feature that happens to be
+ assigned as a second meaning to the same `\( ... \)' construct
+ because there is no conflict in practice between the two meanings.
+ Here is an explanation of this feature:
+
+`\DIGIT'
+ matches the same text that matched the DIGITth occurrence of a `\(
+ ... \)' construct.
+
+ In other words, after the end of a `\( ... \)' construct. the
+ matcher remembers the beginning and end of the text matched by that
+ construct. Then, later on in the regular expression, you can use
+ `\' followed by DIGIT to match that same text, whatever it may
+ have been.
+
+ The strings matching the first nine `\( ... \)' constructs
+ appearing in a regular expression are assigned numbers 1 through 9
+ in the order that the open parentheses appear in the regular
+ expression. So you can use `\1' through `\9' to refer to the text
+ matched by the corresponding `\( ... \)' constructs.
+
+ For example, `\(.*\)\1' matches any newline-free string that is
+ composed of two identical halves. The `\(.*\)' matches the first
+ half, which may be anything, but the `\1' that follows must match
+ the same exact text.
+
+`\(?: ... \)'
+ is called a "shy" grouping operator, and it is used just like `\(
+ ... \)', except that it does not cause the matched substring to be
+ recorded for future reference.
+
+ This is useful when you need a lot of grouping `\( ... \)'
+ constructs, but only want to remember one or two - or if you have
+ more than nine groupings and need to use backreferences to refer to
+ the groupings at the end.
+
+ Using `\(?: ... \)' rather than `\( ... \)' when you don't need
+ the captured substrings ought to speed up your programs some,
+ since it shortens the code path followed by the regular expression
+ engine, as well as the amount of memory allocation and string
+ copying it must do. The actual performance gain to be observed
+ has not been measured or quantified as of this writing.
+
+ The shy grouping operator has been borrowed from Perl, and has not
+ been available prior to XEmacs 20.3, nor is it available in FSF
+ Emacs.
+
+`\w'
+ matches any word-constituent character. The editor syntax table
+ determines which characters these are. *Note Syntax::.
+
+`\W'
+ matches any character that is not a word constituent.
+
+`\sCODE'
+ matches any character whose syntax is CODE. Here CODE is a
+ character that represents a syntax code: thus, `w' for word
+ constituent, `-' for whitespace, `(' for open parenthesis, etc.
+ *Note Syntax::, for a list of syntax codes and the characters that
+ stand for them.
+
+`\SCODE'
+ matches any character whose syntax is not CODE.
+
+ The following regular expression constructs match the empty
+string--that is, they don't use up any characters--but whether they
+match depends on the context.
+
+`\`'
+ matches the empty string, but only at the beginning of the buffer
+ or string being matched against.
+
+`\''
+ matches the empty string, but only at the end of the buffer or
+ string being matched against.
+
+`\='
+ matches the empty string, but only at point. (This construct is
+ not defined when matching against a string.)
+
+`\b'
+ matches the empty string, but only at the beginning or end of a
+ word. Thus, `\bfoo\b' matches any occurrence of `foo' as a
+ separate word. `\bballs?\b' matches `ball' or `balls' as a
+ separate word.
+
+`\B'
+ matches the empty string, but _not_ at the beginning or end of a
+ word.
+
+`\<'
+ matches the empty string, but only at the beginning of a word.
+
+`\>'
+ matches the empty string, but only at the end of a word.
+
+ Here is a complicated regexp used by Emacs to recognize the end of a
+sentence together with any whitespace that follows. It is given in Lisp
+syntax to enable you to distinguish the spaces from the tab characters.
+In Lisp syntax, the string constant begins and ends with a
+double-quote. `\"' stands for a double-quote as part of the regexp,
+`\\' for a backslash as part of the regexp, `\t' for a tab and `\n' for
+a newline.
+
+ "[.?!][]\"')]*\\($\\|\t\\| \\)[ \t\n]*"
+
+This regexp contains four parts: a character set matching period, `?'
+or `!'; a character set matching close-brackets, quotes or parentheses,
+repeated any number of times; an alternative in backslash-parentheses
+that matches end-of-line, a tab or two spaces; and a character set
+matching whitespace characters, repeated any number of times.
+
+\1f
+File: xemacs.info, Node: Search Case, Next: Replace, Prev: Regexps, Up: Search
+
+Searching and Case
+==================
+
+ All searches in Emacs normally ignore the case of the text they are
+searching through; if you specify searching for `FOO', `Foo' and `foo'
+are also considered a match. Regexps, and in particular character
+sets, are included: `[aB]' matches `a' or `A' or `b' or `B'.
+
+ If you want a case-sensitive search, set the variable
+`case-fold-search' to `nil'. Then all letters must match exactly,
+including case. `case-fold-search' is a per-buffer variable; altering
+it affects only the current buffer, but there is a default value which
+you can change as well. *Note Locals::. You can also use Case
+Sensitive Search from the Options menu on your screen.
+
+\1f
+File: xemacs.info, Node: Replace, Next: Other Repeating Search, Prev: Search Case, Up: Search
+
+Replacement Commands
+====================
+
+ Global search-and-replace operations are not needed as often in
+Emacs as they are in other editors, but they are available. In
+addition to the simple `replace-string' command which is like that
+found in most editors, there is a `query-replace' command which asks
+you, for each occurrence of a pattern, whether to replace it.
+
+ The replace commands all replace one string (or regexp) with one
+replacement string. It is possible to perform several replacements in
+parallel using the command `expand-region-abbrevs'. *Note Expanding
+Abbrevs::.
+
+* Menu:
+
+* Unconditional Replace:: Replacing all matches for a string.
+* Regexp Replace:: Replacing all matches for a regexp.
+* Replacement and Case:: How replacements preserve case of letters.
+* Query Replace:: How to use querying.
+
+\1f
+File: xemacs.info, Node: Unconditional Replace, Next: Regexp Replace, Prev: Replace, Up: Replace
+
+Unconditional Replacement
+-------------------------
+
+`M-x replace-string <RET> STRING <RET> NEWSTRING <RET>'
+ Replace every occurrence of STRING with NEWSTRING.
+
+`M-x replace-regexp <RET> REGEXP <RET> NEWSTRING <RET>'
+ Replace every match for REGEXP with NEWSTRING.
+
+ To replace every instance of `foo' after point with `bar', use the
+command `M-x replace-string' with the two arguments `foo' and `bar'.
+Replacement occurs only after point: if you want to cover the whole
+buffer you must go to the beginning first. By default, all occurrences
+up to the end of the buffer are replaced. To limit replacement to part
+of the buffer, narrow to that part of the buffer before doing the
+replacement (*note Narrowing::).
+
+ When `replace-string' exits, point is left at the last occurrence
+replaced. The value of point when the `replace-string' command was
+issued is remembered on the mark ring; `C-u C-<SPC>' moves back there.
+
+ A numeric argument restricts replacement to matches that are
+surrounded by word boundaries.
+
+\1f
+File: xemacs.info, Node: Regexp Replace, Next: Replacement and Case, Prev: Unconditional Replace, Up: Replace
+
+Regexp Replacement
+------------------
+
+ `replace-string' replaces exact matches for a single string. The
+similar command `replace-regexp' replaces any match for a specified
+pattern.
+
+ In `replace-regexp', the NEWSTRING need not be constant. It can
+refer to all or part of what is matched by the REGEXP. `\&' in
+NEWSTRING stands for the entire text being replaced. `\D' in
+NEWSTRING, where D is a digit, stands for whatever matched the D'th
+parenthesized grouping in REGEXP. For example,
+
+ M-x replace-regexp <RET> c[ad]+r <RET> \&-safe <RET>
+
+would replace (for example) `cadr' with `cadr-safe' and `cddr' with
+`cddr-safe'.
+
+ M-x replace-regexp <RET> \(c[ad]+r\)-safe <RET> \1 <RET>
+
+would perform exactly the opposite replacements. To include a `\' in
+the text to replace with, you must give `\\'.
+
+\1f
+File: xemacs.info, Node: Replacement and Case, Next: Query Replace, Prev: Regexp Replace, Up: Replace
+
+Replace Commands and Case
+-------------------------
+
+ If the arguments to a replace command are in lower case, the command
+preserves case when it makes a replacement. Thus, the following
+command:
+
+ M-x replace-string <RET> foo <RET> bar <RET>
+
+replaces a lower-case `foo' with a lower case `bar', `FOO' with `BAR',
+and `Foo' with `Bar'. If upper-case letters are used in the second
+argument, they remain upper-case every time that argument is inserted.
+If upper-case letters are used in the first argument, the second
+argument is always substituted exactly as given, with no case
+conversion. Likewise, if the variable `case-replace' is set to `nil',
+replacement is done without case conversion. If `case-fold-search' is
+set to `nil', case is significant in matching occurrences of `foo' to
+replace; also, case conversion of the replacement string is not done.
+
+\1f
+File: xemacs.info, Node: Query Replace, Prev: Replacement and Case, Up: Replace
+
+Query Replace
+-------------
+
+`M-% STRING <RET> NEWSTRING <RET>'
+`M-x query-replace <RET> STRING <RET> NEWSTRING <RET>'
+ Replace some occurrences of STRING with NEWSTRING.
+
+`M-x query-replace-regexp <RET> REGEXP <RET> NEWSTRING <RET>'
+ Replace some matches for REGEXP with NEWSTRING.
+
+ If you want to change only some of the occurrences of `foo' to
+`bar', not all of them, you can use `query-replace' instead of `M-%'.
+This command finds occurrences of `foo' one by one, displays each
+occurrence, and asks you whether to replace it. A numeric argument to
+`query-replace' tells it to consider only occurrences that are bounded
+by word-delimiter characters.
+
+ Aside from querying, `query-replace' works just like
+`replace-string', and `query-replace-regexp' works just like
+`replace-regexp'.
+
+ The things you can type when you are shown an occurrence of STRING
+or a match for REGEXP are:
+
+`<SPC>'
+ to replace the occurrence with NEWSTRING. This preserves case,
+ just like `replace-string', provided `case-replace' is non-`nil',
+ as it normally is.
+
+`<DEL>'
+ to skip to the next occurrence without replacing this one.
+
+`, (Comma)'
+ to replace this occurrence and display the result. You are then
+ prompted for another input character. However, since the
+ replacement has already been made, <DEL> and <SPC> are equivalent.
+ At this point, you can type `C-r' (see below) to alter the
+ replaced text. To undo the replacement, you can type `C-x u'.
+ This exits the `query-replace'. If you want to do further
+ replacement you must use `C-x ESC' to restart (*note Repetition::).
+
+`<ESC>'
+ to exit without doing any more replacements.
+
+`. (Period)'
+ to replace this occurrence and then exit.
+
+`!'
+ to replace all remaining occurrences without asking again.
+
+`^'
+ to go back to the location of the previous occurrence (or what
+ used to be an occurrence), in case you changed it by mistake.
+ This works by popping the mark ring. Only one `^' in a row is
+ allowed, because only one previous replacement location is kept
+ during `query-replace'.
+
+`C-r'
+ to enter a recursive editing level, in case the occurrence needs
+ to be edited rather than just replaced with NEWSTRING. When you
+ are done, exit the recursive editing level with `C-M-c' and the
+ next occurrence will be displayed. *Note Recursive Edit::.
+
+`C-w'
+ to delete the occurrence, and then enter a recursive editing level
+ as in `C-r'. Use the recursive edit to insert text to replace the
+ deleted occurrence of STRING. When done, exit the recursive
+ editing level with `C-M-c' and the next occurrence will be
+ displayed.
+
+`C-l'
+ to redisplay the screen and then give another answer.
+
+`C-h'
+ to display a message summarizing these options, then give another
+ answer.
+
+ If you type any other character, Emacs exits the `query-replace', and
+executes the character as a command. To restart the `query-replace',
+use `C-x <ESC>', which repeats the `query-replace' because it used the
+minibuffer to read its arguments. *Note C-x ESC: Repetition.
+
+\1f
+File: xemacs.info, Node: Other Repeating Search, Prev: Replace, Up: Search
+
+Other Search-and-Loop Commands
+==============================
+
+ Here are some other commands that find matches for a regular
+expression. They all operate from point to the end of the buffer.
+
+`M-x occur'
+ Print each line that follows point and contains a match for the
+ specified regexp. A numeric argument specifies the number of
+ context lines to print before and after each matching line; the
+ default is none.
+
+ The buffer `*Occur*' containing the output serves as a menu for
+ finding occurrences in their original context. Find an occurrence
+ as listed in `*Occur*', position point there, and type `C-c C-c';
+ this switches to the buffer that was searched and moves point to
+ the original of the same occurrence.
+
+`M-x list-matching-lines'
+ Synonym for `M-x occur'.
+
+`M-x count-matches'
+ Print the number of matches following point for the specified
+ regexp.
+
+`M-x delete-non-matching-lines'
+ Delete each line that follows point and does not contain a match
+ for the specified regexp.
+
+`M-x delete-matching-lines'
+ Delete each line that follows point and contains a match for the
+ specified regexp.
+
+\1f
+File: xemacs.info, Node: Fixit, Next: Files, Prev: Search, Up: Top
+
+Commands for Fixing Typos
+*************************
+
+ This chapter describes commands that are especially useful when you
+catch a mistake in your text just after you have made it, or when you
+change your mind while composing text on line.
+
+* Menu:
+
+* Kill Errors:: Commands to kill a batch of recently entered text.
+* Transpose:: Exchanging two characters, words, lines, lists...
+* Fixing Case:: Correcting case of last word entered.
+* Spelling:: Apply spelling checker to a word, or a whole file.
+
+\1f
+File: xemacs.info, Node: Kill Errors, Next: Transpose, Prev: Fixit, Up: Fixit
+
+Killing Your Mistakes
+=====================
+
+`<DEL>'
+ Delete last character (`delete-backward-char').
+
+`M-<DEL>'
+ Kill last word (`backward-kill-word').
+
+`C-x <DEL>'
+ Kill to beginning of sentence (`backward-kill-sentence').
+
+ The <DEL> character (`delete-backward-char') is the most important
+correction command. When used among graphic (self-inserting)
+characters, it can be thought of as canceling the last character typed.
+
+ When your mistake is longer than a couple of characters, it might be
+more convenient to use `M-<DEL>' or `C-x <DEL>'. `M-<DEL>' kills back
+to the start of the last word, and `C-x <DEL>' kills back to the start
+of the last sentence. `C-x <DEL>' is particularly useful when you are
+thinking of what to write as you type it, in case you change your mind
+about phrasing. `M-<DEL>' and `C-x <DEL>' save the killed text for
+`C-y' and `M-y' to retrieve. *Note Yanking::.
+
+ `M-<DEL>' is often useful even when you have typed only a few
+characters wrong, if you know you are confused in your typing and aren't
+sure exactly what you typed. At such a time, you cannot correct with
+<DEL> except by looking at the screen to see what you did. It requires
+less thought to kill the whole word and start over.
+
+\1f
+File: xemacs.info, Node: Transpose, Next: Fixing Case, Prev: Kill Errors, Up: Fixit
+
+Transposing Text
+================
+
+`C-t'
+ Transpose two characters (`transpose-chars').
+
+`M-t'
+ Transpose two words (`transpose-words').
+
+`C-M-t'
+ Transpose two balanced expressions (`transpose-sexps').
+
+`C-x C-t'
+ Transpose two lines (`transpose-lines').
+
+ The common error of transposing two adjacent characters can be fixed
+with the `C-t' command (`transpose-chars'). Normally, `C-t' transposes
+the two characters on either side of point. When given at the end of a
+line, `C-t' transposes the last two characters on the line, rather than
+transposing the last character of the line with the newline, which
+would be useless. If you catch a transposition error right away, you
+can fix it with just `C-t'. If you catch the error later, move the
+cursor back to between the two transposed characters. If you
+transposed a space with the last character of the word before it, the
+word motion commands are a good way of getting there. Otherwise, a
+reverse search (`C-r') is often the best way. *Note Search::.
+
+ `Meta-t' (`transpose-words') transposes the word before point with
+the word after point. It moves point forward over a word, dragging the
+word preceding or containing point forward as well. The punctuation
+characters between the words do not move. For example, `FOO, BAR'
+transposes into `BAR, FOO' rather than `BAR FOO,'.
+
+ `C-M-t' (`transpose-sexps') is a similar command for transposing two
+expressions (*note Lists::), and `C-x C-t' (`transpose-lines')
+exchanges lines. It works like `M-t' but in determines the division of
+the text into syntactic units differently.
+
+ A numeric argument to a transpose command serves as a repeat count:
+it tells the transpose command to move the character (word, sexp, line)
+before or containing point across several other characters (words,
+sexps, lines). For example, `C-u 3 C-t' moves the character before
+point forward across three other characters. This is equivalent to
+repeating `C-t' three times. `C-u - 4 M-t' moves the word before point
+backward across four words. `C-u - C-M-t' would cancel the effect of
+plain `C-M-t'.
+
+ A numeric argument of zero transposes the character (word, sexp,
+line) ending after point with the one ending after the mark (otherwise a
+command with a repeat count of zero would do nothing).
+
+\1f
+File: xemacs.info, Node: Fixing Case, Next: Spelling, Prev: Transpose, Up: Fixit
+
+Case Conversion
+===============
+
+`M-- M-l'
+ Convert last word to lower case. Note that `Meta--' is
+ "Meta-minus."
+
+`M-- M-u'
+ Convert last word to all upper case.
+
+`M-- M-c'
+ Convert last word to lower case with capital initial.
+
+ A common error is to type words in the wrong case. Because of this,
+the word case-conversion commands `M-l', `M-u', and `M-c' do not move
+the cursor when used with a negative argument. As soon as you see you
+have mistyped the last word, you can simply case-convert it and
+continue typing. *Note Case::.
+
+\1f
+File: xemacs.info, Node: Spelling, Prev: Fixing Case, Up: Fixit
+
+Checking and Correcting Spelling
+================================
+
+`M-$'
+ Check and correct spelling of word (`spell-word').
+
+`M-x spell-buffer'
+ Check and correct spelling of each word in the buffer.
+
+`M-x spell-region'
+ Check and correct spelling of each word in the region.
+
+`M-x spell-string'
+ Check spelling of specified word.
+
+ To check the spelling of the word before point, and optionally
+correct it, use the command `M-$' (`spell-word'). This command runs an
+inferior process containing the `spell' program to see whether the word
+is correct English. If it is not, it asks you to edit the word (in the
+minibuffer) into a corrected spelling, and then performs a
+`query-replace' to substitute the corrected spelling for the old one
+throughout the buffer.
+
+ If you exit the minibuffer without altering the original spelling, it
+means you do not want to do anything to that word. In that case, the
+`query-replace' is not done.
+
+ `M-x spell-buffer' checks each word in the buffer the same way that
+`spell-word' does, doing a `query-replace' for every incorrect word if
+appropriate.
+
+ `M-x spell-region' is similar to `spell-buffer' but operates only on
+the region, not the entire buffer.
+
+ `M-x spell-string' reads a string as an argument and checks whether
+that is a correctly spelled English word. It prints a message giving
+the answer in the echo area.
+
+\1f
+File: xemacs.info, Node: Files, Next: Buffers, Prev: Fixit, Up: Top
+
+File Handling
+*************
+
+ The basic unit of stored data in Unix is the "file". To edit a file,
+you must tell Emacs to examine the file and prepare a buffer containing
+a copy of the file's text. This is called "visiting" the file. Editing
+commands apply directly to text in the buffer; that is, to the copy
+inside Emacs. Your changes appear in the file itself only when you
+"save" the buffer back into the file.
+
+ In addition to visiting and saving files, Emacs can delete, copy,
+rename, and append to files, and operate on file directories.
+
+* Menu:
+
+* File Names:: How to type and edit file name arguments.
+* Visiting:: Visiting a file prepares Emacs to edit the file.
+* Saving:: Saving makes your changes permanent.
+* Reverting:: Reverting cancels all the changes not saved.
+* Auto Save:: Auto Save periodically protects against loss of data.
+* Version Control:: Version control systems (RCS and SCCS).
+* ListDir:: Listing the contents of a file directory.
+* Comparing Files:: Finding where two files differ.
+* Dired:: ``Editing'' a directory to delete, rename, etc.
+ the files in it.
+* Misc File Ops:: Other things you can do on files.
+
+\1f
File: xemacs.info, Node: File Names, Next: Visiting, Prev: Files, Up: Files
File Names
the `find-file' command will check the `buffer-file-truename' of all
visited files when deciding whether a given file is already in a
buffer, instead of just `buffer-file-name'. If you attempt to visit
-another file which is a hard-link or symbolic-link to a file that is
-already in a buffer, the existing buffer will be found instead of a
-newly created one.
+another file which is a symbolic link to a file that is already in a
+buffer, the existing buffer will be found instead of a newly created
+one. This works if any component of the pathname (including a
+non-terminal component) is a symbolic link as well, but doesn't work
+with hard links (nothing does).
If you want to create a file, just visit it. Emacs prints `(New
File)' in the echo area, but in other respects behaves as if you had
locally sets `version-control' to `never' to make sure that there is
only one backup for an Rmail file. *Note Locals::.
-\1f
-File: xemacs.info, Node: Backup Deletion, Next: Backup Copying, Prev: Backup Names, Up: Backup
-
-Automatic Deletion of Backups
-.............................
-
- To prevent unlimited consumption of disk space, Emacs can delete
-numbered backup versions automatically. Generally Emacs keeps the
-first few backups and the latest few backups, deleting any in between.
-This happens every time a new backup is made. The two variables that
-control the deletion are `kept-old-versions' and `kept-new-versions'.
-Their values are, respectively the number of oldest (lowest-numbered)
-backups to keep and the number of newest (highest-numbered) ones to
-keep, each time a new backup is made. The values are used just after a
-new backup version is made; that newly made backup is included in the
-count in `kept-new-versions'. By default, both variables are 2.
-
- If `delete-old-versions' is non-`nil', excess middle versions are
-deleted without notification. If it is `nil', the default, you are
-asked whether the excess middle versions should really be deleted.
-
- You can also use Dired's `.' (Period) command to delete old versions.
-*Note Dired::.
-
-\1f
-File: xemacs.info, Node: Backup Copying, Prev: Backup Deletion, Up: Backup
-
-Copying vs. Renaming
-....................
-
- You can make backup files by copying the old file or by renaming it.
-This makes a difference when the old file has multiple names. If you
-rename the old file into the backup file, the alternate names become
-names for the backup file. If you copy the old file instead, the
-alternate names remain names for the file that you are editing, and the
-contents accessed by those names will be the new contents.
-
- How you make a backup file may also affect the file's owner and
-group. If you use copying, they do not change. If renaming is used,
-you become the file's owner, and the file's group becomes the default
-(different operating systems have different defaults for the group).
-
- Having the owner change is usually a good idea, because then the
-owner is always the person who last edited the file. Occasionally
-there is a file whose owner should not change. Since most files should
-change owners, it is a good idea to use local variable lists to set
-`backup-by-copying-when-mismatch' for the special cases where the owner
-should not change (*note File Variables::).
-
- Three variables control the choice of renaming or copying.
-Normally, renaming is done. If the variable `backup-by-copying' is
-non-`nil', copying is used. Otherwise, if the variable
-`backup-by-copying-when-linked' is non-`nil', copying is done for files
-that have multiple names, but renaming may still be done when the file
-being edited has only one name. If the variable
-`backup-by-copying-when-mismatch' is non-`nil', copying is done if
-renaming would cause the file's owner or group to change.
-
-\1f
-File: xemacs.info, Node: Interlocking, Prev: Backup, Up: Saving
-
-Protection Against Simultaneous Editing
----------------------------------------
-
- Simultaneous editing occurs when two users visit the same file, both
-make changes, and both save their changes. If no one was informed that
-this was happening, and you saved first, you would later find that your
-changes were lost. On some systems, Emacs notices immediately when the
-second user starts to change a file already being edited, and issues a
-warning. When this is not possible, or if the second user has started
-to change the file despite the warning, Emacs checks when the file is
-saved, and issues a second warning when a user is about to overwrite a
-file containing another user's changes. If you are the user editing the
-file, you can take corrective action at this point and prevent actual
-loss of work.
-
- When you make the first modification in an Emacs buffer that is
-visiting a file, Emacs records that you have locked the file. (It does
-this by writing another file in a directory reserved for this purpose.)
-The lock is removed when you save the changes. The idea is that the
-file is locked whenever the buffer is modified. If you begin to modify
-the buffer while the visited file is locked by someone else, this
-constitutes a collision, and Emacs asks you what to do. It does this
-by calling the Lisp function `ask-user-about-lock', which you can
-redefine to customize what it does. The standard definition of this
-function asks you a question and accepts three possible answers:
-
-`s'
- Steal the lock. Whoever was already changing the file loses the
- lock, and you get the lock.
-
-`p'
- Proceed. Go ahead and edit the file despite its being locked by
- someone else.
-
-`q'
- Quit. This causes an error (`file-locked') and the modification
- you were trying to make in the buffer does not actually take place.
-
- Note that locking works on the basis of a file name; if a file has
-multiple names, Emacs does not realize that the two names are the same
-file and cannot prevent two users from editing it simultaneously under
-different names. However, basing locking on names means that Emacs can
-interlock the editing of new files that do not really exist until they
-are saved.
-
- Some systems are not configured to allow Emacs to make locks. On
-these systems, Emacs cannot detect trouble in advance, but it can still
-detect it in time to prevent you from overwriting someone else's
-changes.
-
- Every time Emacs saves a buffer, it first checks the
-last-modification date of the existing file on disk to see that it has
-not changed since the file was last visited or saved. If the date does
-not match, it implies that changes were made in the file in some other
-way, and these changes are about to be lost if Emacs actually does
-save. To prevent this, Emacs prints a warning message and asks for
-confirmation before saving. Occasionally you will know why the file
-was changed and know that it does not matter; then you can answer `yes'
-and proceed. Otherwise, you should cancel the save with `C-g' and
-investigate the situation.
-
- The first thing you should do when notified that simultaneous editing
-has already taken place is to list the directory with `C-u C-x C-d'
-(*note Directory Listing: ListDir.). This will show the file's current
-author. You should attempt to contact that person and ask him not to
-continue editing. Often the next step is to save the contents of your
-Emacs buffer under a different name, and use `diff' to compare the two
-files.
-
- Simultaneous editing checks are also made when you visit a file that
-is already visited with `C-x C-f' and when you start to modify a file.
-This is not strictly necessary, but it is useful to find out about such
-a problem as early as possible, when corrective action takes less work.
-
- Another way to protect your file is to set the read, write, and
-executable permissions for the file. Use the function
-`set-default-file-modes' to set the UNIX `umask' value to the NMASK
-argument. The `umask' value is the default protection mode for new
-files.
-
-\1f
-File: xemacs.info, Node: Reverting, Next: Auto Save, Prev: Saving, Up: Files
-
-Reverting a Buffer
-==================
-
- If you have made extensive changes to a file and then change your
-mind about them, you can get rid of all changes by reading in the
-previous version of the file. To do this, use `M-x revert-buffer',
-which operates on the current buffer. Since reverting a buffer can
-result in very extensive changes, you must confirm it with `yes'.
-
- If the current buffer has been auto-saved more recently than it has
-been saved explicitly, `revert-buffer' offers to read the auto save file
-instead of the visited file (*note Auto Save::). Emacs asks you about
-the auto-save file before the request for confirmation of the
-`revert-buffer' operation, and demands `y' or `n' as an answer. If you
-have started to type `yes' for confirmation without realizing that the
-auto-save question was going to be asked, the `y' will answer that
-question, but the `es' will not be valid confirmation. This gives you
-a chance to cancel the operation with `C-g' and try again with the
-answers you really intend.
-
- `revert-buffer' keeps point at the same distance (measured in
-characters) from the beginning of the file. If the file was edited only
-slightly, you will be at approximately the same piece of text after
-reverting as before. If you have made more extensive changes, the
-value of point in the old file may bring you to a totally different
-piece of text than your last editing point.
-
- A buffer reverted from its visited file is marked "not modified"
-until you make a change.
-
- Some kinds of buffers whose contents reflect data bases other than
-files, such as Dired buffers, can also be reverted. For them,
-reverting means recalculating their contents from the appropriate data.
-Buffers created randomly with `C-x b' cannot be reverted;
-`revert-buffer' reports an error when asked to do so.
-
-\1f
-File: xemacs.info, Node: Auto Save, Next: Version Control, Prev: Reverting, Up: Files
-
-Auto-Saving: Protection Against Disasters
-=========================================
-
- Emacs saves all the visited files from time to time (based on
-counting your keystrokes) without being asked. This is called
-"auto-saving". It prevents you from losing more than a limited amount
-of work if the system crashes.
-
- When Emacs determines it is time for auto-saving, each buffer is
-considered and is auto-saved if auto-saving is turned on for it and it
-has changed since the last time it was auto-saved. If any auto-saving
-is done, the message `Auto-saving...' is displayed in the echo area
-until auto-saving is finished. Errors occurring during auto-saving are
-caught so that they do not interfere with the execution of commands you
-have been typing.
-
-* Menu:
-
-* Files: Auto Save Files.
-* Control: Auto Save Control.
-* Recover:: Recovering text from auto-save files.
-
-\1f
-File: xemacs.info, Node: Auto Save Files, Next: Auto Save Control, Prev: Auto Save, Up: Auto Save
-
-Auto-Save Files
----------------
-
- Auto-saving does not normally write to the files you visited, because
-it can be undesirable to save a program that is in an inconsistent
-state when you have made only half of a planned change. Instead,
-auto-saving is done in a different file called the "auto-save file",
-and the visited file is changed only when you save explicitly, for
-example, with `C-x C-s'.
-
- Normally, the name of the auto-save file is generated by appending
-`#' to the front and back of the visited file name. Thus, a buffer
-visiting file `foo.c' would be auto-saved in a file `#foo.c#'. Most
-buffers that are not visiting files are auto-saved only if you request
-it explicitly; when they are auto-saved, the auto-save file name is
-generated by appending `#%' to the front and `#' to the back of buffer
-name. For example, the `*mail*' buffer in which you compose messages
-to be sent is auto-saved in a file named `#%*mail*#'. Names of
-auto-save files are generated this way unless you customize the
-functions `make-auto-save-file-name' and `auto-save-file-name-p' to do
-something different. The file name to be used for auto-saving a buffer
-is calculated at the time auto-saving is turned on in that buffer.
-
- If you want auto-saving to be done in the visited file, set the
-variable `auto-save-visited-file-name' to be non-`nil'. In this mode,
-there is really no difference between auto-saving and explicit saving.
-
- Emacs deletes a buffer's auto-save file when you explicitly save the
-buffer. To inhibit the deletion, set the variable
-`delete-auto-save-files' to `nil'. Changing the visited file name with
-`C-x C-w' or `set-visited-file-name' renames any auto-save file to
-correspond to the new visited name.
-
-\1f
-File: xemacs.info, Node: Auto Save Control, Next: Recover, Prev: Auto Save Files, Up: Auto Save
-
-Controlling Auto-Saving
------------------------
-
- Each time you visit a file, auto-saving is turned on for that file's
-buffer if the variable `auto-save-default' is non-`nil' (but not in
-batch mode; *note Entering Emacs::). The default for this variable is
-`t', so Emacs auto-saves buffers that visit files by default. You can
-use the command `M-x auto-save-mode' to turn auto-saving for a buffer
-on or off. Like other minor mode commands, `M-x auto-save-mode' turns
-auto-saving on with a positive argument, off with a zero or negative
-argument; with no argument, it toggles.
-
- Emacs performs auto-saving periodically based on counting how many
-characters you have typed since the last time auto-saving happened. The
-variable `auto-save-interval' specifies the number of characters
-between auto-saves. By default, it is 300. Emacs also auto-saves
-whenever you call the function `do-auto-save'.
-
- Emacs also does auto-saving whenever it gets a fatal error. This
-includes killing the Emacs job with a shell command such as `kill
--emacs', or disconnecting a phone line or network connection.
-
- You can set the number of seconds of idle time before an auto-save is
-done. Setting the value of the variable `auto-save-timeout' to zero or
-`nil' will disable auto-saving due to idleness.
-
- The actual amount of idle time between auto-saves is logarithmically
-related to the size of the current buffer. This variable is the number
-of seconds after which an auto-save will happen when the current buffer
-is 50k or less; the timeout will be 2 1/4 times this in a 200k buffer, 3
-3/4 times this in a 1000k buffer, and 4 1/2 times this in a 2000k
-buffer.
-
- For this variable to have any effect, you must do `(require 'timer)'.
-
-\1f
-File: xemacs.info, Node: Recover, Prev: Auto Save Control, Up: Auto Save
-
-Recovering Data from Auto-Saves
--------------------------------
-
- If you want to use the contents of an auto-save file to recover from
-a loss of data, use the command `M-x recover-file <RET> FILE <RET>'.
-Emacs visits FILE and then (after your confirmation) restores the
-contents from the auto-save file `#FILE#'. You can then save the file
-with `C-x C-s' to put the recovered text into FILE itself. For
-example, to recover file `foo.c' from its auto-save file `#foo.c#', do:
-
- M-x recover-file <RET> foo.c <RET>
- C-x C-s
-
- Before asking for confirmation, `M-x recover-file' displays a
-directory listing describing the specified file and the auto-save file,
-so you can compare their sizes and dates. If the auto-save file is
-older, `M-x recover-file' does not offer to read it.
-
- Auto-saving is disabled by `M-x recover-file' because using this
-command implies that the auto-save file contains valuable data from a
-past session. If you save the data in the visited file and then go on
-to make new changes, turn auto-saving back on with `M-x auto-save-mode'.
-
-\1f
-File: xemacs.info, Node: Version Control, Next: ListDir, Prev: Auto Save, Up: Files
-
-Version Control
-===============
-
- "Version control systems" are packages that can record multiple
-versions of a source file, usually storing the unchanged parts of the
-file just once. Version control systems also record history information
-such as the creation time of each version, who created it, and a
-description of what was changed in that version.
-
- The GNU project recommends the version control system known as RCS,
-which is free software and available from the Free Software Foundation.
-Emacs supports use of either RCS or SCCS (a proprietary, but widely
-used, version control system that is not quite as powerful as RCS)
-through a facility called VC. The same Emacs commands work with either
-RCS or SCCS, so you hardly have to know which one of them you are using.
-
-* Menu:
-
-* Concepts of VC:: Basic version control information;
- checking files in and out.
-* Editing with VC:: Commands for editing a file maintained
- with version control.
-* Variables for Check-in/out:: Variables that affect the commands used
- to check files in or out.
-* Log Entries:: Logging your changes.
-* Change Logs and VC:: Generating a change log file from log
- entries.
-* Old Versions:: Examining and comparing old versions.
-* VC Status:: Commands to view the VC status of files and
- look at log entries.
-* Renaming and VC:: A command to rename both the source and
- master file correctly.
-* Snapshots:: How to make and use snapshots, a set of
- file versions that can be treated as a unit.
-* Version Headers:: Inserting version control headers into
- working files.
-
-\1f
-File: xemacs.info, Node: Concepts of VC, Next: Editing with VC, Prev: Version Control, Up: Version Control
-
-Concepts of Version Control
----------------------------
-
- When a file is under version control, we also say that it is
-"registered" in the version control system. Each registered file has a
-corresponding "master file" which represents the file's present state
-plus its change history, so that you can reconstruct from it either the
-current version or any specified earlier version. Usually the master
-file also records a "log entry" for each version describing what was
-changed in that version.
-
- The file that is maintained under version control is sometimes called
-the "work file" corresponding to its master file.
-
- To examine a file, you "check it out". This extracts a version of
-the source file (typically, the most recent) from the master file. If
-you want to edit the file, you must check it out "locked". Only one
-user can do this at a time for any given source file. (This kind of
-locking is completely unrelated to the locking that Emacs uses to
-detect simultaneous editing of a file.)
-
- When you are done with your editing, you must "check in" the new
-version. This records the new version in the master file, and unlocks
-the source file so that other people can lock it and thus modify it.
-
- Checkin and checkout are the basic operations of version control.
-You can do both of them with a single Emacs command: `C-x C-q'
-(`vc-toggle-read-only').
-
- A "snapshot" is a coherent collection of versions of the various
-files that make up a program. *Note Snapshots::.
-
-\1f
-File: xemacs.info, Node: Editing with VC, Next: Variables for Check-in/out, Prev: Concepts of VC, Up: Version Control
-
-Editing with Version Control
-----------------------------
-
- When you visit a file that is maintained using version control, the
-mode line displays `RCS' or `SCCS' to inform you that version control
-is in use, and also (in case you care) which low-level system the file
-is actually stored in. Normally, such a source file is read-only, and
-the mode line indicates this with `%%'. With RCS, the mode line also
-indicates the number of the head version, which is normally also the
-version you are looking at.
-
- These are the commands for editing a file maintained with version
-control:
-
-`C-x C-q'
- Check the visited file in or out.
-
-`C-x v u'
- Revert the buffer and the file to the last checked in version.
-
-`C-x v c'
- Remove the last-entered change from the master for the visited
- file. This undoes your last check-in.
-
-`C-x v i'
- Register the visited file in version control.
-
-(`C-x v' is the prefix key for version control commands; all of these
-commands except for `C-x C-q' start with `C-x v'.)
-
- When you want to modify a file maintained with version control, type
-`C-x C-q' (`vc-toggle-read-only'). This "checks out" the file, and
-tells RCS or SCCS to lock the file. This means making the file
-writable for you (but not for anyone else).
-
- When you are finished editing the file, type `C-x C-q' again. When
-used on a file that is checked out, this command checks the file in.
-But check-in does not start immediately; first, you must enter the "log
-entry"--a description of the changes in the new version. `C-x C-q'
-pops up a buffer for you to enter this in. When you are finished
-typing in the log entry, type `C-c C-c' to terminate it; this is when
-actual check-in takes place.
-
- Once you have checked in your changes, the file is unlocked, so that
-other users can lock it and modify it.
-
- Emacs does not save backup files for source files that are maintained
-with version control. If you want to make backup files despite version
-control, set the variable `vc-make-backup-files' to a non-`nil' value.
-
- Normally the work file exists all the time, whether it is locked or
-not. If you set `vc-keep-workfiles' to `nil', then checking in a new
-version with `C-x C-q' deletes the work file; but any attempt to visit
-the file with Emacs creates it again.
-
- It is not impossible to lock a file that someone else has locked. If
-you try to check out a file that is locked, `C-x C-q' asks you whether
-you want to "steal the lock." If you say yes, the file becomes locked
-by you, but a message is sent to the person who had formerly locked the
-file, to inform him of what has happened. The mode line indicates that
-a file is locked by someone else by displaying the login name of that
-person, before the version number.
-
- If you want to discard your current set of changes and revert to the
-last version checked in, use `C-x v u' (`vc-revert-buffer'). This
-cancels your last check-out, leaving the file unlocked. If you want to
-make a different set of changes, you must first check the file out
-again. `C-x v u' requires confirmation, unless it sees that you
-haven't made any changes since the last checked-in version.
-
- `C-x v u' is also the command to use if you lock a file and then
-don't actually change it.
-
- You can cancel a change after checking it in, with `C-x v c'
-(`vc-cancel-version'). This command discards all record of the most
-recent checked in version, so be careful about using it. It requires
-confirmation with `yes'. By default, `C-x v c' reverts your workfile
-and buffer to the previous version (the one that precedes the version
-that is deleted), but you can prevent the reversion by giving the
-command a prefix argument. Then the buffer does not change.
-
- This command with a prefix argument is useful when you have checked
-in a change and then discover a trivial error in it; you can cancel the
-erroneous check-in, fix the error, and repeat the check-in.
-
- Be careful when invoking `C-x v c', as it is easy to throw away a
-lot of work with it. To help you be careful, this command always
-requires confirmation with `yes'.
-
- You can register the visited file for version control using
-`C-x v i' (`vc-register'). If the variable `vc-default-back-end' is
-non-`nil', it specifies which version control system to use; otherwise,
-this uses RCS if it is installed on your system and SCCS if not. After
-`C-x v i', the file is unlocked and read-only. Type `C-x C-q' if you
-wish to edit it.
-
- By default, the initial version number is 1.1. If you want to use a
-different number, give `C-x v i' a prefix argument; then it reads the
-initial version number using the minibuffer.
-
- If `vc-initial-comment' is non-`nil', `C-x v i' reads an initial
-comment (much like a log entry) to describe the purpose of this source
-file.
-
- To specify the version number for a subsequent checkin, use the
-command `C-u C-x v v'. `C-x v v' (`vc-next-action') is the command
-that `C-x C-q' uses to do the "real work" when the visited file uses
-version control. When used for checkin, and given a prefix argument,
-it reads the version number with the minibuffer.
-
-\1f
-File: xemacs.info, Node: Variables for Check-in/out, Next: Log Entries, Prev: Editing with VC, Up: Version Control
-
-Variables Affecting Check-in and Check-out
-------------------------------------------
-
- If `vc-suppress-confirm' is non-`nil', then `C-x C-q' and `C-x v i'
-can save the current buffer without asking, and `C-x v u' also operates
-without asking for confirmation. (This variable does not affect `C-x v
-c'; that is so drastic that it should always ask for confirmation.)
-
- VC mode does much of its work by running the shell commands for RCS
-and SCCS. If `vc-command-messages' is non-`nil', VC displays messages
-to indicate which shell commands it runs, and additional messages when
-the commands finish.
-
- Normally, VC assumes that it can deduce the locked/unlocked state of
-files by looking at the file permissions of the work file; this is
-fast. However, if the `RCS' or `SCCS' subdirectory is actually a
-symbolic link, then VC does not trust the file permissions to reflect
-this status.
-
- You can specify the criterion for whether to trust the file
-permissions by setting the variable `vc-mistrust-permissions'. Its
-value may be `t' (always mistrust the file permissions and check the
-master file), `nil' (always trust the file permissions), or a function
-of one argument which makes the decision. The argument is the directory
-name of the `RCS' or `SCCS' subdirectory. A non-`nil' value from the
-function says to mistrust the file permissions.
-
- If you find that the file permissions of work files are changed
-erroneously, set `vc-mistrust-permissions' to `t'. Then VC always
-checks the master file to determine the file's status.
-
- You can specify additional directories to search for version control
-programs by setting the variable `vc-path'. These directories are
-searched before the usual search path. The proper result usually
-happens automatically.
-
-\1f
-File: xemacs.info, Node: Log Entries, Next: Change Logs and VC, Prev: Variables for Check-in/out, Up: Version Control
-
-Log Entries
------------
-
- When you're editing an initial comment or log entry for inclusion in
-a master file, finish your entry by typing `C-c C-c'.
-
-`C-c C-c'
- Finish the comment edit normally (`vc-finish-logentry'). This
- finishes check-in.
-
- To abort check-in, just don't type `C-c C-c' in that buffer. You
-can switch buffers and do other editing. As long as you don't try to
-check in another file, the entry you were editing remains in its
-buffer, and you can go back to that buffer at any time to complete the
-check-in.
-
- If you change several source files for the same reason, it is often
-convenient to specify the same log entry for many of the files. To do
-this, use the history of previous log entries. The commands `M-n',
-`M-p', `M-s' and `M-r' for doing this work just like the minibuffer
-history commands (except that these versions are used outside the
-minibuffer).
-
- Each time you check in a file, the log entry buffer is put into VC
-Log mode, which involves running two hooks: `text-mode-hook' and
-`vc-log-mode-hook'.
-
-\1f
-File: xemacs.info, Node: Change Logs and VC, Next: Old Versions, Prev: Log Entries, Up: Version Control
-
-Change Logs and VC
-------------------
-
- If you use RCS for a program and also maintain a change log file for
-it (*note Change Log::), you can generate change log entries
-automatically from the version control log entries:
-
-`C-x v a'
- Visit the current directory's change log file and create new
- entries for versions checked in since the most recent entry in the
- change log file (`vc-update-change-log').
-
- This command works with RCS only; it does not work with SCCS.
-
- For example, suppose the first line of `ChangeLog' is dated 10 April
-1992, and that the only check-in since then was by Nathaniel Bowditch
-to `rcs2log' on 8 May 1992 with log text `Ignore log messages that
-start with `#'.'. Then `C-x v a' visits `ChangeLog' and inserts text
-like this:
-
- Fri May 8 21:45:00 1992 Nathaniel Bowditch (nat@apn.org)
-
- * rcs2log: Ignore log messages that start with `#'.
-
-You can then edit the new change log entry further as you wish.
-
- Normally, the log entry for file `foo' is displayed as `* foo: TEXT
-OF LOG ENTRY'. The `:' after `foo' is omitted if the text of the log
-entry starts with `(FUNCTIONNAME): '. For example, if the log entry
-for `vc.el' is `(vc-do-command): Check call-process status.', then the
-text in `ChangeLog' looks like this:
-
- Wed May 6 10:53:00 1992 Nathaniel Bowditch (nat@apn.org)
-
- * vc.el (vc-do-command): Check call-process status.
-
- When `C-x v a' adds several change log entries at once, it groups
-related log entries together if they all are checked in by the same
-author at nearly the same time. If the log entries for several such
-files all have the same text, it coalesces them into a single entry.
-For example, suppose the most recent checkins have the following log
-entries:
-
-For `vc.texinfo':
- Fix expansion typos.
-For `vc.el':
- Don't call expand-file-name.
-For `vc-hooks.el':
- Don't call expand-file-name.
-
- They appear like this in `ChangeLog':
-
- Wed Apr 1 08:57:59 1992 Nathaniel Bowditch (nat@apn.org)
-
- * vc.texinfo: Fix expansion typos.
-
- * vc.el, vc-hooks.el: Don't call expand-file-name.
-
- Normally, `C-x v a' separates log entries by a blank line, but you
-can mark several related log entries to be clumped together (without an
-intervening blank line) by starting the text of each related log entry
-with a label of the form `{CLUMPNAME} '. The label itself is not
-copied to `ChangeLog'. For example, suppose the log entries are:
-
-For `vc.texinfo':
- {expand} Fix expansion typos.
-For `vc.el':
- {expand} Don't call expand-file-name.
-For `vc-hooks.el':
- {expand} Don't call expand-file-name.
-
-Then the text in `ChangeLog' looks like this:
-
- Wed Apr 1 08:57:59 1992 Nathaniel Bowditch (nat@apn.org)
-
- * vc.texinfo: Fix expansion typos.
- * vc.el, vc-hooks.el: Don't call expand-file-name.
-
- A log entry whose text begins with `#' is not copied to `ChangeLog'.
-For example, if you merely fix some misspellings in comments, you can
-log the change with an entry beginning with `#' to avoid putting such
-trivia into `ChangeLog'.
-