translation approved by the author instead of in the original English.
\1f
+File: xemacs.info, Node: Other Window, Next: Pop Up Window, Prev: Split Window, Up: Windows
+
+Using Other Windows
+===================
+
+`C-x o'
+ Select another window (`other-window'). That is the letter `o',
+ not zero.
+
+`M-C-v'
+ Scroll the next window (`scroll-other-window').
+
+`M-x compare-windows'
+ Find the next place where the text in the selected window does not
+ match the text in the next window.
+
+`M-x other-window-any-frame N'
+ Select the Nth different window on any frame.
+
+ To select a different window, use `C-x o' (`other-window'). That is
+an `o', for `other', not a zero. When there are more than two windows,
+the command moves through all the windows in a cyclic order, generally
+top to bottom and left to right. From the rightmost and bottommost
+window, it goes back to the one at the upper left corner. A numeric
+argument, N, moves several steps in the cyclic order of windows. A
+negative numeric argument moves around the cycle in the opposite order.
+If the optional second argument WHICH-FRAMES is non-`nil', the
+function cycles through all frames. When the minibuffer is active, the
+minibuffer is the last window in the cycle; you can switch from the
+minibuffer window to one of the other windows, and later switch back
+and finish supplying the minibuffer argument that is requested. *Note
+Minibuffer Edit::.
+
+ The command `M-x other-window-any-frame' also selects the window N
+steps away in the cyclic order. However, unlike `other-window', this
+command selects a window on the next or previous frame instead of
+wrapping around to the top or bottom of the current frame, when there
+are no more windows.
+
+ The usual scrolling commands (*note Display::) apply to the selected
+window only. `M-C-v' (`scroll-other-window') scrolls the window that
+`C-x o' would select. Like `C-v', it takes positive and negative
+arguments.
+
+ The command `M-x compare-windows' compares the text in the current
+window with the text in the next window. Comparison starts at point in
+each window. Point moves forward in each window, a character at a time,
+until the next set of characters in the two windows are different.
+Then the command is finished.
+
+ A prefix argument IGNORE-WHITESPACE means ignore changes in
+whitespace. The variable `compare-windows-whitespace' controls how
+whitespace is skipped.
+
+ If `compare-ignore-case' is non-`nil', changes in case are also
+ignored.
+
+\1f
+File: xemacs.info, Node: Pop Up Window, Next: Change Window, Prev: Other Window, Up: Windows
+
+Displaying in Another Window
+============================
+
+ `C-x 4' is a prefix key for commands that select another window
+(splitting the window if there is only one) and select a buffer in that
+window. Different `C-x 4' commands have different ways of finding the
+buffer to select.
+
+`C-x 4 b BUFNAME <RET>'
+ Select buffer BUFNAME in another window. This runs
+ `switch-to-buffer-other-window'.
+
+`C-x 4 f FILENAME <RET>'
+ Visit file FILENAME and select its buffer in another window. This
+ runs `find-file-other-window'. *Note Visiting::.
+
+`C-x 4 d DIRECTORY <RET>'
+ Select a Dired buffer for directory DIRECTORY in another window.
+ This runs `dired-other-window'. *Note Dired::.
+
+`C-x 4 m'
+ Start composing a mail message in another window. This runs
+ `mail-other-window', and its same-window version is `C-x m' (*note
+ Sending Mail::).
+
+`C-x 4 .'
+ Find a tag in the current tag table in another window. This runs
+ `find-tag-other-window', the multiple-window variant of `M-.'
+ (*note Tags::).
+
+ If the variable `display-buffer-function' is non-`nil', its value is
+the function to call to handle `display-buffer'. It receives two
+arguments, the buffer and a flag that if non-`nil' means that the
+currently selected window is not acceptable. Commands such as
+`switch-to-buffer-other-window' and `find-file-other-window' work using
+this function.
+
+\1f
File: xemacs.info, Node: Change Window, Prev: Pop Up Window, Up: Windows
Deleting and Rearranging Windows
Simplified Chinese script (for mainland of China), Traditional Chinese
script (for Taiwan and Hong-Kong), Greek script, Hebrew script, IPA
symbols, Japanese scripts (Hiragana, Katakana and Kanji), Korean scripts
-(Hangul and Hanja) and Cyrillic script (for Beylorussian, Bulgarian,
+(Hangul and Hanja) and Cyrillic script (for Byelorussian, Bulgarian,
Russian, Serbian and Ukrainian). These features have been merged from
the modified version of Emacs known as MULE (for "MULti-lingual
Enhancement to GNU Emacs").
serpentine recording for the SUN. Also, SystemV tapes can be written
in cpio format, blocked 5120 bytes, ASCII headers.
-\1f
-File: xemacs.info, Node: TeX Editing, Next: TeX Print, Prev: TeX Mode, Up: TeX Mode
-
-TeX Editing Commands
-....................
-
- Here are the special commands provided in TeX mode for editing the
-text of the file.
-
-`"'
- Insert, according to context, either ```' or `"' or `'''
- (`TeX-insert-quote').
-
-`<LFD>'
- Insert a paragraph break (two newlines) and check the previous
- paragraph for unbalanced braces or dollar signs (`tex-terminate-
- paragraph').
-
-`M-x validate-tex-buffer'
- Check each paragraph in the buffer for unbalanced braces or dollar
- signs.
-
-`C-c {'
- Insert `{}' and position point between them (`tex-insert-braces').
-
-`C-c }'
- Move forward past the next unmatched close brace (`up-list').
-
-`C-c C-e'
- Close a block for LaTeX (`tex-close-latex-block').
-
- In TeX, the character `"' is not normally used; you use ```' to
-start a quotation and `''' to end one. TeX mode defines the key `"' to
-insert ```' after whitespace or an open brace, `"' after a backslash,
-or `''' otherwise. This is done by the command `tex-insert-quote'. If
-you need the character `"' itself in unusual contexts, use `C-q' to
-insert it. Also, `"' with a numeric argument always inserts that
-number of `"' characters.
-
- In TeX mode, `$' has a special syntax code which attempts to
-understand the way TeX math mode delimiters match. When you insert a
-`$' that is meant to exit math mode, the position of the matching `$'
-that entered math mode is displayed for a second. This is the same
-feature that displays the open brace that matches a close brace that is
-inserted. However, there is no way to tell whether a `$' enters math
-mode or leaves it; so when you insert a `$' that enters math mode, the
-previous `$' position is shown as if it were a match, even though they
-are actually unrelated.
-
- If you prefer to keep braces balanced at all times, you can use `C-c
-{' (`tex-insert-braces') to insert a pair of braces. It leaves point
-between the two braces so you can insert the text that belongs inside.
-Afterward, use the command `C-c }' (`up-list') to move forward past the
-close brace.
-
- There are two commands for checking the matching of braces. <LFD>
-(`tex-terminate-paragraph') checks the paragraph before point, and
-inserts two newlines to start a new paragraph. It prints a message in
-the echo area if any mismatch is found. `M-x validate-tex-buffer'
-checks the entire buffer, paragraph by paragraph. When it finds a
-paragraph that contains a mismatch, it displays point at the beginning
-of the paragraph for a few seconds and pushes a mark at that spot.
-Scanning continues until the whole buffer has been checked or until you
-type another key. The positions of the last several paragraphs with
-mismatches can be found in the mark ring (*note Mark Ring::).
-
- Note that square brackets and parentheses, not just braces, are
-matched in TeX mode. This is wrong if you want to check TeX syntax.
-However, parentheses and square brackets are likely to be used in text
-as matching delimiters and it is useful for the various motion commands
-and automatic match display to work with them.
-
- In LaTeX input, `\begin' and `\end' commands must balance. After
-you insert a `\begin', use `C-c C-f' (`tex-close-latex-block') to
-insert automatically a matching `\end' (on a new line following the
-`\begin'). A blank line is inserted between the two, and point is left
-there.
-
projects / chise / xemacs-chise.git- / blobdiff