+2000-05-30 MORIOKA Tomohiko <tomo@kanji.zinbun.kyoto-u.ac.jp>
+
+ * mule/mule-charset.el (default-coded-charset-priority-list):
+ Delete `ucs'.
+
+2000-04-28 MORIOKA Tomohiko <tomo@kanji.zinbun.kyoto-u.ac.jp>
+
+ * dumped-lisp.el (preloaded-file-list): Don't add "mojikyo".
+
+ * mule/mule-charset.el (default-coded-charset-priority-list): Add
+ `mojikyo' instead of `mojikyo-pj-[1..21]'.
+
+2000-04-27 MORIOKA Tomohiko <tomo@kanji.zinbun.kyoto-u.ac.jp>
+
+ * mule/vietnamese.el (vscii-2): Delete abolished property
+ `composite'; now composite mode is default.
+
+2000-04-26 MORIOKA Tomohiko <tomo@kanji.zinbun.kyoto-u.ac.jp>
+
+ * bytecomp.el (byte-compile-insert-header): Use `binary' instead
+ of `raw-text'; check \uHHHH representation even if non-ascii
+ characters are not found.
+
+ * dumped-lisp.el (preloaded-file-list): Add "ccs-tcvn5712.el" in
+ UTF-2000; add "viet-ccl" in non-UTF-2000 Mule; add "vietnamese"
+ unconditionally.
+
+ * mule/viet-ccl.el: New file.
+
+ * mule/vietnamese.el (vscii-2): New coding-system in UTF-2000.
+ (tcvn-5712): New coding-system alias of `vscii-2' in UTF-2000.
+ - Separate CCL based implementations to viet-ccl.el.
+
+2000-02-24 MORIOKA Tomohiko <tomo@m17n.org>
+
+ * mule/mule-conf.el (japanese-jisx0213-1): Allow
+ "jisx0213.2000-1".
+ (japanese-jisx0213-2): Allow "jisx0213.2000-2".
+
+ * mule/mule-charset.el (default-coded-charset-priority-list):
+ Prefer `japanese-jisx0213-1' and `japanese-jisx0213-2' to
+ `japanese-jisx0208-1978' and `japanese-jisx0208-1990'.
+
+2000-01-31 MORIOKA Tomohiko <tomo@etl.go.jp>
+
+ * dumped-lisp.el (preloaded-file-list): Add "mojikyo" in UTF-2000.
+
+2000-01-27 MORIOKA Tomohiko <tomo@m17n.org>
+
+ * mule/mule-charset.el (default-coded-charset-priority-list): Add
+ `ucs' in UTF-2000.
+
+2000-01-26 MORIOKA Tomohiko <tomo@etl.go.jp>
+
+ * mule/mule-charset.el (default-coded-charset-priority-list):
+ Prefer `mojikyo-pj-*' and `ideograph-daikanwa' to `ucs-bmp' and
+ `arabic-iso8859-6'.
+
+2000-01-12 MORIOKA Tomohiko <tomo@etl.go.jp>
+
+ * mule/mule-charset.el (default-coded-charset-priority-list): Add
+ `mojikyo-pj-[1 .. 21]' in UTF-2000.
+
+2000-01-14 MORIOKA Tomohiko <tomo@etl.go.jp>
+
+ * mule/mule-charset.el (default-coded-charset-priority-list): Add
+ `katakana-jisx0201' in UTF-2000.
+
+1999-12-23 MORIOKA Tomohiko <tomo@urania.m17n.org>
+
+ * dumped-lisp.el (preloaded-file-list): Add "u0A000-Yi-Syllables",
+ "u0AC00-Hangul-Syllables", "u0FB00-Alphabetic-Presentation-Forms",
+ "u0FB50-Arabic-Presentation-Forms-A",
+ "u0FE20-Combining-Half-Marks", "u0FE30-CJK-Compatibility-Forms",
+ "u0FE50-Small-Form-Variants",
+ "u0FE70-Arabic-Presentation-Forms-B",
+ "u0FF00-Halfwidth-and-Fullwidth-Forms" and "u0FFF0-Specials" in
+ UTF-2000.
+
+1999-12-22 MORIOKA Tomohiko <tomo@etl.go.jp>
+
+ * dumped-lisp.el (preloaded-file-list): Delete
+ "ccs-jisx0208-1983.el"; add "Ideograph-R031-Enclosure"
+ ... "Ideograph-R214-Flute" in UTF-2000.
+
+1999-11-21 MORIOKA Tomohiko <tomo@etl.go.jp>
+
+ * mule/mule-conf.el (japanese-jisx0213-1): New coded-charset.
+ (japanese-jisx0213-2): New coded-charset.
+
+ * dumped-lisp.el (preloaded-file-list): Add
+ "Ideograph-R028-Private", "Ideograph-R029-Again" and
+ "Ideograph-R030-Mouth".
+
+1999-11-19 MORIOKA Tomohiko <tomo@etl.go.jp>
+
+ * dumped-lisp.el (preloaded-file-list): Add "Ideograph-R012-Eight",
+ "Ideograph-R013-Down-Box", "Ideograph-R014-Cover",
+ "Ideograph-R015-Ice", "Ideograph-R016-Table",
+ "Ideograph-R017-Open-Box", "Ideograph-R018-Knife",
+ "Ideograph-R019-Power", "Ideograph-R020-Wrap", "Ideograph-R021-Spoon",
+ "Ideograph-R022-Right-Open-Box", "Ideograph-R023-Hiding-Enclosure",
+ "Ideograph-R024-Ten", "Ideograph-R025-Divination",
+ "Ideograph-R026-Seal" and "Ideograph-R027-Cliff" in UTF-2000.
+
+1999-11-18 MORIOKA Tomohiko <tomo@etl.go.jp>
+
+ * dumped-lisp.el (preloaded-file-list): Add "Ideograph-R002-Line",
+ "Ideograph-R003-Dot", "Ideograph-R004-Slash",
+ "Ideograph-R005-Second", "Ideograph-R006-Hook",
+ "Ideograph-R007-Two", "Ideograph-R008-Lid", "Ideograph-R009-Man",
+ "Ideograph-R010-Legs" and "Ideograph-R011-Enter".
+
+ * mule/mule-charset.el (default-coded-charset-priority-list): Add
+ `japanese-jisx0208-1990' and `japanese-jisx0208-1978'.
+
+1999-11-16 MORIOKA Tomohiko <tomo@urania.m17n.org>
+
+ * dumped-lisp.el (preloaded-file-list): Add "Ideograph-R001-One"
+ in UTF-2000.
+
+1999-11-16 MORIOKA Tomohiko <tomo@urania.m17n.org>
+
+ * mule/mule-conf.el (sisheng): Moved from mule/chinese.el.
+ (chinese-isoir165): Moved from mule/chinese.el.
+ (chinese-cns11643-3): Moved from mule/chinese.el.
+ (chinese-cns11643-4): Moved from mule/chinese.el.
+ (chinese-cns11643-5): Moved from mule/chinese.el.
+ (chinese-cns11643-6): Moved from mule/chinese.el.
+ (chinese-cns11643-7): Moved from mule/chinese.el.
+
+ * mule/chinese.el: Move definition of coded-charsets to
+ mule/mule-conf.el.
+
+1999-11-15 MORIOKA Tomohiko <tomo@urania.m17n.org>
+
+ * mule/mule-charset.el (default-coded-charset-priority-list): Add
+ `ideograph-daikanwa'.
+
+1999-11-15 MORIOKA Tomohiko <tomo@urania.m17n.org>
+
+ * dumped-lisp.el (preloaded-file-list): Delete
+ "ccs-jisx0201-latin.el".
+
+1999-11-15 MORIOKA Tomohiko <tomo@etl.go.jp>
+
+ * dumped-lisp.el (preloaded-file-list): Add
+ "u031A0-Extended-Bopomofo" in UTF-2000.
+
+1999-11-15 MORIOKA Tomohiko <tomo@etl.go.jp>
+
+ * dumped-lisp.el (preloaded-file-list): u02E00-CJK-Radicals was
+ renamed to u02E00-CJK-Radical-Supplement.
+
+1999-11-14 MORIOKA Tomohiko <tomo@urania.m17n.org>
+
+ * dumped-lisp.el (preloaded-file-list): Add
+ "u03000-CJK-Symbols-and-Punctuation", "u03040-Hiragana",
+ "u030A0-Katakana", "u03100-Bopomofo",
+ "u03130-Hangul-Compatibility-Jamo", "u03190-Kanbun",
+ "u03200-Enclosed-CJK-Letters-and-Months" and
+ "u03300-CJK-Compatibility".
+
+1999-11-14 MORIOKA Tomohiko <tomo@urania.m17n.org>
+
+ * dumped-lisp.el (preloaded-file-list): Add "u02E00-CJK-Radicals",
+ "u02F00-Kangxi-Radicals" and
+ "u02FF0-Ideographic-Description-Characters".
+
+1999-11-14 MORIOKA Tomohiko <tomo@urania.m17n.org>
+
+ * dumped-lisp.el (preloaded-file-list): Add
+ "u02600-Miscellaneous-Symbols", "u02700-Dingbats" and
+ "u02800-Braille-Patterns" in UTF-2000.
+
+1999-11-14 MORIOKA Tomohiko <tomo@urania.m17n.org>
+
+ * dumped-lisp.el (preloaded-file-list): Load "uXXXXX-*" instead of
+ "uXXXXX-*.el" in UTF-2000.
+
+ * bytecomp.el (byte-compile-insert-header): Delete comments if
+ non-ASCII characters are found; allow `byte-compile-dynamic' and
+ `byte-compile-dynamic-docstrings' if *.elc will be encoded by
+ `raw-text'.
+
+1999-11-14 MORIOKA Tomohiko <tomo@urania.m17n.org>
+
+ * dumped-lisp.el (preloaded-file-list): Add
+ "u02500-Box-Drawing.el", "u02580-Block-Elements.el" and
+ "u025A0-Geometric-Shapes.el".
+
+1999-11-14 MORIOKA Tomohiko <tomo@urania.m17n.org>
+
+ * dumped-lisp.el (preloaded-file-list): Add
+ "u02400-Control-Pictures.el", "u02440-OCR.el" and
+ "u02460-Enclosed-Alphanumerics.el".
+
+1999-11-14 MORIOKA Tomohiko <tomo@urania.m17n.org>
+
+ * mule/mule-charset.el (default-coded-charset-priority-list): Add
+ `chinese-gb2312'.
+
+ * dumped-lisp.el (preloaded-file-list): Add
+ "u02200-Mathematical-Operators.el" and
+ "u02300-Miscellaneous-Technical.el".
+
+1999-11-14 MORIOKA Tomohiko <tomo@urania.m17n.org>
+
+ * mule/mule-charset.el (default-coded-charset-priority-list): Add
+ `chinese-cns11643-*'.
+
+ * dumped-lisp.el (preloaded-file-list): Add
+ "u02100-Letterlike-Symbols.el", "u02150-Number-Forms.el" and
+ "u02190-Arrows.el" in UTF-2000.
+
+1999-11-14 MORIOKA Tomohiko <tomo@urania.m17n.org>
+
+ * mule/mule-charset.el (default-coded-charset-priority-list): Add
+ `korean-ksc5601'.
+
+ * dumped-lisp.el (preloaded-file-list): Add
+ "u02000-General-Punctuation.el", "u02070-Superscripts.el",
+ "u02080-Subscripts.el", "u020A0-Currency-Symbols.el" and
+ "u020D0-Combining-Diacritical-Marks-for-Symbols.el" in UTF-2000.
+
+1999-11-14 MORIOKA Tomohiko <tomo@urania.m17n.org>
+
+ * dumped-lisp.el (preloaded-file-list): Delete "ccs-viscii.el".
+
+1999-11-14 MORIOKA Tomohiko <tomo@urania.m17n.org>
+
+ * dumped-lisp.el (preloaded-file-list): Add "u013A0-Cherokee.el",
+ "u01400-Canadian.el", "u01680-Ogham.el", "u016A0-Runic.el",
+ "u01780-Khmer.el", "u01800-Mongolian.el",
+ "u01E00-Latin-Extended-Additional.el" and
+ "u01F00-Greek-Extended.el" in UTF-2000.
+
+1999-11-13 MORIOKA Tomohiko <tomo@urania.m17n.org>
+
+ * mule/mule-charset.el (default-coded-charset-priority-list): Add
+ `ethiopic-ucs' and `ethiopic'.
+
+ * dumped-lisp.el (preloaded-file-list): Add "u010A0-Georgian.el",
+ "u01100-Hangul-Jamo.el" and "u01200-Ethiopic.el".
+
+ * mule/mule-conf.el: Move definition of coded-charset `ethiopic'
+ from mule/ethiopic.el.
+
+ * mule/ethiopic.el: Move definition of coded-charset `ethiopic' to
+ mule/mule-conf.el.
+
+1999-11-13 MORIOKA Tomohiko <tomo@urania.m17n.org>
+
+ * mule/mule-charset.el (default-coded-charset-priority-list): Add
+ `lao'.
+
+ * mule/mule-conf.el (lao): New coded-charset.
+
+ * dumped-lisp.el (preloaded-file-list): Add
+ "u00900-Devanagari.el", "u00980-Bengali.el", "u00A00-Gurmukhi.el",
+ "u00A80-Gujarati.el", "u00B00-Oriya.el", "u00B80-Tamil.el",
+ "u00C00-Telugu.el", "u00C80-Kannada.el", "u00D00-Malayalam.el",
+ "u00D80-Sinhala.el", "u00E00-Thai.el", "u00E80-Lao.el",
+ "u00F00-Tibetan.el" and "u01000-Myanmar.el".
+
+1999-11-13 MORIOKA Tomohiko <tomo@urania.m17n.org>
+
+ * mule/mule-charset.el (default-coded-charset-priority-list): Add
+ `ucs-bmp' and `arabic-iso8859-6'.
+
+1999-11-13 MORIOKA Tomohiko <tomo@urania.m17n.org>
+
+ * dumped-lisp.el (preloaded-file-list): Add "u00400-Cyrillic.el",
+ "u00530-Armenian.el", "u00590-Hebrew.el", "u00600-Arabic.el",
+ "u00700-Syriac.el" and "u00780-Thaana.el" in UTF-2000.
+
+1999-11-12 MORIOKA Tomohiko <tomo@urania.m17n.org>
+
+ * startup.el (normal-top-level): Load autoload file for UTF-2000
+ in UTF-2000.
+
+1999-11-11 MORIOKA Tomohiko <tomo@etl.go.jp>
+
+ * dumped-lisp.el (preloaded-file-list): Add "mule-conf" in Mule;
+ delete "ccs-iso8859-*.el"; add "u00000-C0.el",
+ "u00020-Basic-Latin.el", "u00080-C1.el",
+ "u000A0-Latin-1-Supplement.el", "u00100-Latin-Extended-A.el",
+ "u00180-Latin-Extended-B.el", "u00250-IPA-Extensions.el",
+ "u002B0-Spacing-Modifier-Letters.el",
+ "u00300-Combining-Diacritical-Marks.el" and "u00370-Greek.el" in
+ UTF-2000.
+
+1999-11-10 MORIOKA Tomohiko <tomo@etl.go.jp>
+
+ * mule/mule-charset.el (default-coded-charset-priority-list): Add
+ `japanese-jisx0212' and `ipa' in UTF-2000; use `latin-viscii-*'
+ instead of `vietnamese-viscii-*'.
+
+1999-11-09 MORIOKA Tomohiko <tomo@etl.go.jp>
+
+ * mule/mule-conf.el: New file.
+
+ * mule/misc-lang.el: Move definition of charset `ipa' to
+ mule/mule-conf.el.
+
+1999-10-10 MORIOKA Tomohiko <tomo@urania.m17n.org>
+
+ * mule/mule-charset.el (default-coded-charset-priority-list): Add
+ `latin-viscii'; prefer it for characters used in Vietnamese.
+
+1999-10-08 Daiki Ueno <ueno@ueda.info.waseda.ac.jp>
+
+ * bytecomp.el (byte-compile-insert-header): Fix regexp.
+
+1999-10-07 MORIOKA Tomohiko <tomo@etl.go.jp>
+
+ * mule/viet-chars.el (latin-viscii-lower): Renamed from charset
+ `vietnamese-viscii-lower'.
+ (latin-viscii-upper): Renamed from charset
+ `vietnamese-viscii-upper'.
+ (vietnamese-viscii-lower): New alias for charset
+ `latin-viscii-lower'.
+ (vietnamese-viscii-upper): New alias for charset
+ `latin-viscii-upper'.
+
+1999-10-05 MORIOKA Tomohiko <tomo@etl.go.jp>
+
+ * mule/mule-charset.el (default-coded-charset-priority-list):
+ Comment out `hiragana-jisx0208' and `katakana-jisx0208'.
+
+1999-10-04 MORIOKA Tomohiko <tomo@etl.go.jp>
+
+ * mule/ccs-jisx0208-1983.el, mule/ccs-tcvn5712.el,
+ mule/ccs-viscii.el, mule/ccs-iso8859-9.el,
+ mule/ccs-jisx0201-latin.el, mule/ccs-iso8859-2.el,
+ mule/ccs-iso8859-3.el, mule/ccs-iso8859-4.el: Moved to
+ lisp/utf-2000.
+
+1999-10-03 MORIOKA Tomohiko <tomo@urania.m17n.org>
+
+ * mule/ccs-tcvn5712.el: New file.
+
+1999-10-03 MORIOKA Tomohiko <tomo@urania.m17n.org>
+
+ * dumped-lisp.el (preloaded-file-list): Add "ccs-jisx0208-1983.el"
+ in UTF-2000.
+
+1999-10-02 MORIOKA Tomohiko <tomo@urania.m17n.org>
+
+ * mule/mule-charset.el (default-coded-charset-priority-list): Add
+ `japanese-jisx0208'.
+
+1999-10-02 MORIOKA Tomohiko <tomo@urania.m17n.org>
+
+ * dumped-lisp.el (preloaded-file-list): Add
+ "ccs-jisx0201-latin.el", "ccs-iso8859-2.el", "ccs-iso8859-3.el",
+ "ccs-iso8859-4.el", "ccs-iso8859-9.el" and "ccs-viscii.el" in
+ UTF-2000.
+
+ * mule/ccs-iso8859-2.el, mule/ccs-iso8859-3.el,
+ mule/ccs-iso8859-4.el, mule/ccs-iso8859-9.el,
+ mule/ccs-jisx0201-latin.el, mule/ccs-jisx0208-1983.el,
+ mule/ccs-viscii.el: New files.
+
+ * bytecomp.el (byte-compile-insert-header): Don't use `raw-text'
+ if \uXXXX is found.
+
+1999-09-30 MORIOKA Tomohiko <tomo@urania.m17n.org>
+
+ * mule/mule-charset.el (default-coded-charset-priority-list): Add
+ `hiragana-jisx0208' and `katakana-jisx0208'.
+
+1999-09-21 MORIOKA Tomohiko <tomo@etl.go.jp>
+
+ * mule/chinese.el (chinese-cns11643-3): Define it even if
+ `utf-2000' is provided.
+ (chinese-cns11643-4): Likewise.
+ (chinese-cns11643-5): Likewise.
+ (chinese-cns11643-6): Likewise.
+ (chinese-cns11643-7): Likewise.
+
+1999-09-14 MORIOKA Tomohiko <tomo@etl.go.jp>
+
+ * mule/mule-charset.el (default-coded-charset-priority-list): Add
+ thai-tis620 and hebrew-iso8859-8; namely all BMP are covered.
+
+1999-09-13 MORIOKA Tomohiko <tomo@urania.m17n.org>
+
+ * mule/mule-charset.el (default-coded-charset-priority-list): Add
+ `cyrillic-iso8859-5' and `greek-iso8859-7'.
+
+1999-09-13 MORIOKA Tomohiko <tomo@urania.m17n.org>
+
+ * mule/mule-charset.el (default-coded-charset-priority-list):
+ Setup in UTF-2000.
+
+1999-09-09 MORIOKA Tomohiko <tomo@etl.go.jp>
+
+ * mule/viet-chars.el: Don't define charset
+ `vietnamese-viscii-lower' and `vietnamese-viscii-upper' because
+ they are defined as builtin charsets.
+
+1999-08-31 MORIOKA Tomohiko <tomo@etl.go.jp>
+
+ * version.el (emacs-version): Add more space just before UTF-2000
+ version string.
+
+1999-08-29 MORIOKA Tomohiko <tomo@etl.go.jp>
+
+ * version.el ([constant] emacs-version): Don't add a space in the
+ preceding place of `xemacs-betaname' because it is duplicated.
+ (emacs-version): Add UTF-2000 version if `utf-2000' is provided.
+
+ * startup.el (splash-frame-body): Add ETL.
+
+1999-08-28 MORIOKA Tomohiko <tomo@etl.go.jp>
+
+ * mule/chinese.el (chinese-cns11643-3): Don't define if `utf-2000'
+ is provided because it is defined as builtin charset.
+ (chinese-cns11643-4): Likewise.
+ (chinese-cns11643-5): Likewise.
+ (chinese-cns11643-6): Likewise.
+ (chinese-cns11643-7): Likewise.
+
+1999-08-24 MORIOKA Tomohiko <tomo@etl.go.jp>
+
+ * mule/mule-cmds.el (reset-language-environment): Fix problem when
+ coding-system `iso-10646-ucs-4' is not defined.
+
+1999-06-17 MORIOKA Tomohiko <tomo@etl.go.jp>
+
+ * bytecomp.el (byte-compile-insert-header): Use utf-8 as
+ coding-system if `utf-2000' is provided.
+
+1999-06-15 MORIOKA Tomohiko <tomo@etl.go.jp>
+
+ * mule/mule-coding.el: Add `utf-8' to coding-priority-list if
+ `utf-2000' is provided.
+
+1999-06-15 MORIOKA Tomohiko <tomo@etl.go.jp>
+
+ * dumped-lisp.el (preloaded-file-list): Don't load vietnamese.el
+ if utf-2000 is provided temporally.
+
+1999-06-10 MORIOKA Tomohiko <tomo@etl.go.jp>
+
+ * mule/vietnamese.el (leading-code-private-11): Deleted [defined
+ as builtin variable].
+
+1999-06-04 MORIOKA Tomohiko <tomo@etl.go.jp>
+
+ * files.el (insert-file-contents-literally): Treat file as binary;
+ call file-name-handlers. [sync with Emacs 20.3.10]
+
+2000-05-28 Martin Buchholz <martin@xemacs.org>
+
+ * XEmacs 21.2.34 is released.
+
+2000-05-20 Karl M. Hegbloom <karlheg@bittersweet.inetarena.com>
+
+ * font-lock.el (font-lock-keywords): Rewrote docstring
+
+2000-05-22 Karl M. Hegbloom <karlheg@debian.org>
+
+ * loadhist.el (unload-feature): handle case where x is both boundp
+ and fboundp
+
+2000-05-22 Karl M. Hegbloom <karlheg@debian.org>
+
+ * packages.el: It's ok to use built-in macros, but not lisp
+ defined ones.
+
+2000-05-20 Ben Wing <ben@xemacs.org>
+
+ * font-lock.el:
+ * font-lock.el (font-lock-message-threshold):
+ * font-lock.el (font-lock-mode):
+ * font-lock.el (font-lock-default-fontify-buffer):
+ * font-lock.el (font-lock-always-fontify-immediately):
+ * font-lock.el (font-lock-old-extent): Removed.
+ * font-lock.el (font-lock-old-len): Removed.
+ * font-lock.el (font-lock-fontify-glumped-region): Removed.
+ * font-lock.el (font-lock-pending-extent-table): New.
+ * font-lock.el (font-lock-range-table): New.
+ * font-lock.el (font-lock-after-change-function):
+ * font-lock.el (font-lock-after-change-function-1): Removed.
+ * font-lock.el (font-lock-fontify-pending-extents): New.
+ * font-lock.el ('font-lock-revert-cleanup): Removed.
+ * font-lock.el ('font-lock-revert-setup): Removed.
+ Rewrite deferral code to handle any number of changes, merging
+ them properly. Remove hacked-up code for revert-buffer, now
+ unnecessary.
+
+ * menubar-items.el (default-menubar):
+ In Options->Edit Init File, don't switch to emacs-lisp-mode
+ unless necessary; doing this turns off font-lock.
+
+2000-05-15 Yoshiki Hayashi <yoshiki@xemacs.org>
+
+ * keydefs.el: Define C-x BS to backward-kill-sentence.
+
+2000-05-15 Yoshiki Hayashi <yoshiki@xemacs.org>
+
+ * files.el (hack-local-variables-prop-line): Use non-greedy
+ matching to process -*-texinfo-*- -*-.
+
+2000-05-11 Jonathan Marten <jonathan.marten@uk.sun.com>
+
+ * minibuf.el (minibuf-directory-files): new function.
+ (read-file-name-activate-callback): use minibuf-directory-files.
+ (read-directory-name-internal): ditto.
+ (mouse-file-display-completion-list): ditto.
+ (mouse-directory-display-completion-list): ditto.
+ (read-file-name-internal): remove "./" from completion list unless
+ explicitly matched, for consistency.
+
+2000-05-11 Ben Wing <ben@xemacs.org>
+
+ * gutter-items.el (gutter-buffers-tab):
+ * gutter-items.el (add-tab-to-gutter):
+ * gutter-items.el (update-tab-in-gutter):
+ * gutter-items.el (remove-buffer-from-gutter-tab): Removed.
+ * gutter-items.el (append-progress-display):
+ * gutter-items.el (abort-progress-display):
+ * gutter-items.el (raw-append-progress-display):
+ Further fixes. Use set-glyph-image not set-image-instance-property,
+ to fix problems with multiple windows in a frame.
+
+ * menubar-items.el (tutorials-menu-filter):
+ Fix typo.
+
+ * startup.el (early-error-handler):
+ Display message box under windows; otherwise, message will disappear
+ before it can be viewed.
+
+ * update-elc.el:
+ Fix bug in NEEDTODUMP processing.
+
+2000-05-08 Yoshiki Hayashi <yoshiki@xemacs.org>
+
+ * startup.el (lock-directory): Removed.
+ (superlock-file): Ditto.
+ (startup-set-paths): Remove lockdir.
+ (startup-setup-paths-warning): Remove lock-directory.
+
+ * setup-paths.el (paths-find-lock-directory): Removed.
+ (paths-find-superlock-file): Ditto.
+
+2000-05-09 Ben Wing <ben@xemacs.org>
+
+ * faces.el (set-face-property):
+ * faces.el (set-face-font):
+ * faces.el (set-face-foreground):
+ * faces.el (set-face-background):
+ * faces.el (set-face-background-pixmap):
+ * faces.el (set-face-underline-p):
+ * faces.el (set-face-strikethru-p):
+ * faces.el (set-face-highlight-p):
+ * faces.el (set-face-dim-p):
+ * faces.el (set-face-blinking-p):
+ * faces.el (set-face-reverse-p):
+ doc string changes.
+
+ * glyphs.el:
+ * glyphs.el (make-image-specifier):
+ * glyphs.el (glyph-property):
+ * glyphs.el (set-glyph-image):
+ * glyphs.el (make-glyph):
+ * glyphs.el (make-pointer-glyph):
+ * glyphs.el (make-icon-glyph):
+ * glyphs.el (widget-image-instance-p): New.
+ authorship info, lots of doc changes. New predicate, inadvertently
+ omitted. the general principle with specifier docs is now that
+ the description of instantiators should go with the make-foo-specifier
+ fun's doc string, rather than in foo-specifier-p. this follows
+ conventions elsewhere in XEmacs and in general is a lot more obvious
+ of a place to look. sometimes the make-foo-specifier function needs
+ to be created in the process.
+
+ * gutter.el:
+ * gutter.el (make-gutter-specifier): New.
+ * gutter.el (make-gutter-size-specifier): New.
+ * gutter.el (make-gutter-visible-specifier): New.
+ specifier doc updates according to the conventions specified before.
+
+ * objects.el:
+ * objects.el (make-font-specifier):
+ * objects.el (make-color-specifier):
+ * objects.el (make-face-boolean-specifier): New.
+ specifier doc updates according to the conventions specified before.
+
+ * specifier.el:
+ * specifier.el (set-specifier):
+ * specifier.el (make-integer-specifier): New.
+ * specifier.el (make-boolean-specifier): New.
+ * specifier.el (make-natnum-specifier): New.
+ * specifier.el (make-generic-specifier): New.
+ * specifier.el (make-display-table-specifier): New.
+ specifier doc updates according to the conventions specified before.
+
+ * toolbar.el:
+ * toolbar.el (make-toolbar-specifier): New.
+ specifier doc updates according to the conventions specified before.
+
+2000-05-09 Ben Wing <ben@xemacs.org>
+
+ * process.el (call-process-internal): Revert to previous version
+ because Mike's change clashed with a change I did not long before.
+ Changed progn to prog1 to fix the bug pointed out by Mike Alexander.
+ Thanks very much Mike for pointing out the bug and submitting a
+ patch!
+
+2000-04-13 Mike Alexander <mta@arbortext.com>
+
+ * process.el (call-process-internal): Send the correct input buffer
+ (call-process-internal): Return the exit status of the process
+
+2000-05-07 Ben Wing <ben@xemacs.org>
+
+ * winnt.el:
+ * winnt.el (nt-quote-args-verbatim): Removed.
+ * winnt.el (nt-quote-args-prefix-quote): Removed.
+ * winnt.el (nt-quote-args-backslash-quote): Removed.
+ * winnt.el (nt-quote-args-double-quote): Removed.
+ * winnt.el (nt-quote-args-functions-alist): Removed.
+ * winnt.el (nt-quote-process-args): Removed.
+ Remove all stuff for argument quoting. We borrow the code instead
+ from Emacs 20.6, which is much more careful in its quoting
+ (e.g. in handling runs of the escape character) and avoids most of
+ the need for this Lisp mechanism by checking to see whether we're
+ running a Cygwin or normal program and doing the appropriate
+ quoting. If we end up needing such a mechanism, we should add
+ it by extending the variable `mswindows-quote-process-args' so it
+ can take an alist of regexps.
+
+2000-05-07 Ben Wing <ben@xemacs.org>
+
+ * keydefs.el:
+ Restore M-up, M-down to 21.1 state. Put *ward-sentence on
+ C-M-left, C-M-right instead. Define C-M-up, C-M-down to scroll
+ the window without moving point.
+
+ * simple.el:
+ * simple.el (scroll-up-one): New.
+ * simple.el (scroll-down-one): New.
+ Functions for use with C-M-up/down.
+
+2000-05-01 Martin Buchholz <martin@xemacs.org>
+
+ * XEmacs 21.2.33 is released.
+
+2000-04-29 Martin Buchholz <martin@xemacs.org>
+
+ * dialog.el (yes-or-no-p-dialog-box):
+ Fix docstring.
+ Fix following horrible bug in X11 mode with focus-follows-mouse:
+ 1. Visit two files in two different frames.
+ 2. do File->Revert Buffer in one of those frames.
+ 3. Dialog box appears.
+ 4. Arrange things so that the mouse passes over the *other*
+ frame, then to the dialog box, and click on "Yes".
+ 5. The file contents end up in the *wrong* buffer!
+ Add TODO comment.
+
+2000-04-28 Ben Wing <ben@xemacs.org>
+
+ * help.el (describe-installation): correct typo introduced
+ in last patch: boundp -> fboundp.
+
+ * etags.el (buffer-tag-table-list):
+ canonicalize filenames to Unix format so that tag-table-alist
+ searching works under Windows.
+
+ * autoload.el:
+ Bowdlerize the supposedly objectionable words
+ "who couldn't quite manage to cleanly modify batch-update-autoloads".
+
+ * gutter-items.el (set-progress-display-style):
+ * gutter-items.el (search-dialog-callback):
+ * gutter-items.el (make-search-dialog):
+ Change to new callback-ex api.
+
+2000-04-26 Björn Torkelsson <torkel@hpc2n.umu.se>
+
+ * help.el: (describe-installation): decode-coding-string is not
+ defined in a non MULE environment.
+
+2000-04-28 Ben Wing <ben@xemacs.org>
+
+ * gutter-items.el (buffer-list-changed-hook):
+ use it, not record-buffer-hook.
+
+ * subr.el (record-buffer-hook): Removed.
+
+2000-04-27 Ben Wing <ben@xemacs.org>
+
+ * gutter-items.el (buffers-tab-switch-to-buffer): do not
+ use NORECORD option. Andy will not like this, but the existing
+ gutter behavior is just wrong, as per this comment:
+
+ ;; this used to add the norecord flag to both calls below.
+ ;; this is bogus because it is a pervasive assumption in XEmacs
+ ;; that the current buffer is at the front of the buffers list.
+ ;; for example, select an item and then do M-C-l
+ ;; (switch-to-other-buffer). Things get way confused.
+ ;;
+ ;; Andy, if you want to maintain the current look, you must
+ ;; *uncouple* the gutter order and buffers order.
+
+ * loaddefs.el (completion-ignored-extensions): unfuckify.
+
+ * bytecomp.el (batch-byte-compile-one-file): new function, used in
+ xemacs.mak.
+
+ * autoload.el (batch-update-one-directory): new function, used in
+ xemacs.mak.
+
+ * loadup.el: set gc-cons-threshold very high unless dumping --
+ loadup during update-elc is much much much faster. also do this
+ when quick-building.
+
+ add commented-out code for profiling loadup.
+
+
+ * update-elc.el (preloaded-file-list): add bytecomp.el, since it
+ is required in order to build xemacs.
+
+2000-04-26 Ben Wing <ben@xemacs.org>
+
+ * loadup.el: don't garbage collect during loadup if quick-build
+ compile-time option is set.
+
+2000-04-23 Ben Wing <ben@xemacs.org>
+
+ * update-elc.el: compute whether any dumped .el or .elc files
+ are newer than the dumped exe, and touch the file ../src/NEEDTODUMP
+ if so.
+
+ * update-elc.el (update-elc-files-to-compile): always change
+ NOBYTECOMPILE in the src directory rather than current dir,
+ so it will work under NT.
+
+ * autoload.el (autoload-trim-file-name): canonicalize to slashes so
+ the form of this file is identical between Unix and Windows.
+ (autoload-target-directory): Fixed to be lisp/ not lisp/prim/.
+ Added comment.
+ (update-autoloads-from-directory): updated doc string.
+ updated doc strings in a few other places.
+
+2000-04-18 Yoshiki Hayashi <yoshiki@xemacs.org>
+
+ * bytecomp.el (byte-force-recompile): Fix argument to
+ byte-recompile-directory.
+
+2000-04-17 Yoshiki Hayashi <yoshiki@xemacs.org>
+
+ * gutter-items.el (progress-display-clear-when-idle): Use
+ add-one-shot-hook.
+ * gutter-items.el (clear-progress-display): Adjust number of
+ arguments.
+
+2000-04-13 Yoshiki Hayashi <yoshiki@xemacs.org>
+
+ * dumped-lisp.el (preloaded-file-list): Always dump select.el.
+
+2000-04-16 Ben Wing <ben@xemacs.org>
+
+ * printer.el: New file.
+
+ * dumped-lisp.el (preloaded-file-list): Declare printer.el.
+
+ * help.el (describe-installation): Fix decoding for Windows.
+
+ * menubar-items.el:
+ * menubar-items.el (default-menubar):
+ * menubar-items.el (tutorials-menu-filter): New.
+ * menubar-items.el (popup-menubar-menu):
+ Add authorship. Redo Help menu and Tutorials filter.
+
+ * menubar.el: Correct comment.
+
+ * modeline.el (modeline-buffer-identification): Correct doc string.
+
+ * simple.el:
+ * simple.el (printing): Removed.
+ * simple.el (printer-name): Removed.
+ * simple.el (generic-print-buffer): Removed.
+ * simple.el (generic-print-region): Removed.
+ Move generic print code to printer.el.
+
+2000-04-15 Ben Wing <ben@xemacs.org>
+
+ * simple.el (generic-print-region): New.
+ make this function actually work.
+ (generic-print-buffer): call generic-print-region.
+
+2000-04-14 Andy Piper <andy@xemacs.org>
+
+ * gutter-items.el (make-search-dialog): avoid unneccessary futzing
+ by using the new widget-callback-current-channel.
+ (search-dialog-callback): ditto.
+
+2000-04-12 Andy Piper <andy@xemacs.org>
+
+ * gutter.el (default-gutter-position): moved from gutter-items.el.
+ (default-gutter-position-changed-hook): ditto.
+ (gutter-element-visibility-changed-hook): ditto.
+ (set-gutter-element): ditto.
+ (remove-gutter-element): ditto.
+ (set-gutter-element-visible-p): ditto.
+ (gutter-element-visible-p): ditto.
+ (init-gutter): ditto.
+
+ * dialog.el (make-dialog-box): renamed and moved from
+ gutter-items.el
+
+ * gutter-items.el: move various functions elsewhere.
+
+2000-04-13 Katsumi Yamaoka <yamaoka@jpl.org>
+
+ * menubar-items.el: Fixed place of parenthesis.
+
+2000-04-12 Ben Wing <ben@xemacs.org>
+
+ * etags.el (find-tag-at-point): New. Lets you do find-tag
+ without constantly being prompted for the tag.
+ * simple.el: Added a number of section headings, to clarify the
+ organization of this file.
+ * simple.el (activate-region):
+ * simple.el (region-exists-p):
+ * simple.el (region-active-p):
+ Moved these three function down to the other side of
+ the case-changing functions, so they join the rest of
+ the region code.
+ * simple.el (printing): New.
+ * simple.el (printer-name): New.
+ * simple.el (generic-print-buffer): New.
+ New functions, a very simple prototype for a unified
+ printing interface.
+
+ * process.el (call-process-internal): Real fix for null BUFFER,
+ other problems with BUFFER specs.
+
+ * menubar-items.el:
+ Fixed up File->Print to use new printing functions.
+ Various corrections and expansions to Grep/Compile menus.
+ New options for Printing.
+ New options for SMTP Mail, the way to send mail under
+ MS Windows. (There's also a package patch to make SMTP
+ Mail be the default under MSWin.)
+
+2000-04-09 Jeff Miller <jmiller@cablespeed.com>
+
+ * menubar-items.el: Selecting Rectangle Mousing from menubar
+ did not work. Needed to quote mouse-track-rectangle-p.
+
+2000-04-06 Yoshiki Hayashi <yoshiki@xemacs.org>
+
+ * cl-compat.el (keywordp): Removed.
+
+2000-04-05 Andy Piper <andy@xemacs.org>
+
+ * gutter-items.el (progress-layout-glyph): don't initialize here.
+ (progress-gauge-glyph): use dynamic sizing.
+ (set-progress-display-style): new function. Set progress glyphs
+ appropriately depending on the style.
+ (progress-display-style): new variable. Custom version of
+ set-progress-display-style.
+ (progress-abort-glyph): switch to dynamic sizes.
+ (search-dialog-text): make the edit field active.
+
+2000-04-04 Andy Piper <andy@xemacs.org>
+
+ * gutter-items.el (make-search-dialog): need to make the search
+ dialog visible after creation.
+
+ * menubar-items.el (default-menubar): use the search dialog for
+ searching. Remove some extraneous search menu items.
+
+ * gutter-items.el (set-gutter-element): allow glyphs to be used as
+ well as strings.
+ (make-gutter-only-dialog-frame): allow the user to create the
+ frame unmapped. Allow the gutter spec to be given as a glyph.
+ (search-dialog-direction): new variable.
+ (search-dialog-text): new variable.
+ (search-dialog-callback): new function. Callback for the search
+ dialog action.
+ (make-search-dialog): new function. Create a user-friendly search
+ dialog.
+
+2000-04-04 Hrvoje Niksic <hniksic@iskon.hr>
+
+ * faces.el (set-face-stipple): Use mswindows-bitmap-file-path
+ under Windows.
+
+2000-04-01 Andy Piper <andy@xemacs.org>
+
+ * font-lock.el (font-lock-fontify-keywords-region): Calculate
+ progress more accurately.
+
+2000-02-02 Hirokazu FUKUI <hfukui@sannet.ne.jp>
+
+ * finder.el (finder-compile-keywords): Process readable files only.
+ Because error in process of .#finder-inf.el when compile xemacs
+ with --with-clash-detection option.
+
+2000-03-31 Andy Piper <andy@xemacs.org>
+
+ * gutter-items.el (append-progress-display): don't delay after a
+ successful font-lock.
+ (make-gutter-only-dialog-frame): new function. Allow users to
+ create gutter-only dialogs.
+
+2000-03-27 Mike Alexander <mta@arbortext.com>
+
+ * process.el (call-process-internal): Handle a null BUFFER
+ parameter correctly.
+
+2000-03-28 Andy Piper <andy@xemacs.org>
+
+ * gutter-items.el (abort-progress-display): put strings in the
+ gutter not extents.
+ (progress-layout-glyph): signal special 'quit callback.
+ (progress-display-quit-function): deleted.
+ (progress-display-stop-callback): deleted.
+ (progress-display-dispatch-command-events): deleted.
+ (append-progress-display): remove calls to
+ progress-display-dispatch-command-events.
+ (raw-append-progress-display): ditto.
+
+2000-03-23 Hrvoje Niksic <hniksic@iskon.hr>
+
+ * faces.el (set-face-stipple): Rewrite to correctly handle PIXMAP
+ being a list. Actually define `stipple-pixmap-p' which is used as
+ an error predicate. Correctly handle PIXMAP being either relative
+ or absolute file name.
+
+2000-03-24 Andy Piper <andy@xemacs.org>
+
+ * gutter-items.el (add-tab-to-gutter): use copy-sequence.
+ (abort-progress-display): ditto. Don't delete the created extent.
+ (raw-append-progress-display): ditto.
+ (progress-display-dispatch-non-command-events): new
+ function. Encapsulates what we want to do when no command input is
+ required.
+ (progress-display-dispatch-command-events): likewise, but disable
+ for now since it causes too many problems.
+ (append-progress-display): use them.
+ (raw-append-progress-display): ditto.
+ (default-gutter-position-changed-hook): set this rather than
+ default-gutter-position-changed.
+ (default-gutter-position-changed-hook): lambda with zero arguments
+ rather than one.
+ (raw-append-progress-display): trap errors in pending input since
+ allowing them to signal will hose the gauge well and
+ truly. Ideally we would like to delay these until we are more able
+ to cope.
+ (append-progress-display): ditto.
+
+2000-03-20 Jeff Miller <jmiller@cablespeed.com>
+
+ * lisp/make-docfile.el: call-process-internal is now implemented
+ in process.el.
+
+2000-03-21 Ben Wing <ben@xemacs.org>
+
+ * mule\mule-cmds.el (set-language-info-alist):
+ Fix to correspond to new menu arrangement.
+
+2000-03-21 Ben Wing <ben@xemacs.org>
+
+ * process.el:
+ * process.el (call-process-internal): New.
+ New implementation of call-process. Only enabled under NT, so far.
+ stderr handling not implemented yet in CVS'd C code.
+
+2000-03-20 Ben Wing <ben@xemacs.org>
+
+ * lisp-mode.el:
+ * lisp-mode.el (lisp-interaction-mode-menubar-menu): New.
+ * lisp-mode.el (lisp-interaction-mode):
+ Put back Lisp Interaction menubar for Jan V's sake.
+
+ * simple.el:
+ * simple.el (mark-ring):
+ * simple.el (dont-record-current-mark): New.
+ * simple.el (in-shifted-motion-command): New.
+ * simple.el (mark-ring-unrecorded-commands): New.
+ * simple.el (mark-ring-max):
+ * simple.el (set-mark-command):
+ * simple.el (push-mark):
+ * simple.el (handle-pre-motion-command):
+ Implement scheme for not recording unimportant marks.
+
+ * subr.el:
+ * subr.el (function-allows-args): New.
+ New function function-allows-args.
+
+2000-03-20 Martin Buchholz <martin@xemacs.org>
+
+ * XEmacs 21.2.32 is released.
+
+2000-03-20 Andy Piper <andy@xemacs.org>
+
+ * gutter-items.el (update-tab-in-gutter): force selection of the
+ selected-window if required to do so.
+ (buffers-tab-items): ditto.
+ (add-tab-to-gutter): ditto.
+ (create-frame-hook): use force-selection.
+ (default-gutter-position-changed): lambdify.
+ (update-tab-hook): deleted since it was only used in one place.
+
+2000-03-18 Andy Piper <andy@xemacs.org>
+
+ * files.el (find-file-noselect): undo change that shouldn't have
+ gone in.
+
+2000-03-17 Andy Piper <andy@xemacs.org>
+
+ * buffer.el (switch-to-buffer): use last-nonminibuf-window instead
+ of selected-window trickery.
+
+ * gutter-items.el (update-tab-in-gutter): don't give dedicated
+ frames tabs.
+ (progress-display-stop-callback): progress -> progress-display
+ (progress-display-quit-function): ditto.
+ (clear-progress-display): ditto.
+ (remove-progress-display): ditto.
+ (append-progress-display): ditto.
+ (abort-progress-display): ditto.
+ (raw-append-progress-display): ditto.
+ (display-progress-display): ditto.
+ (current-progress-display-label): ditto.
+ (current-progress-display): ditto.
+ (lprogress-display): ditto and save the buffer
+ (progress-display): ditto. Otherwise the buffer sometimes gets
+ changed which confuses font-lock.
+
+ * font-lock.el (font-lock-default-fontify-buffer): catch all
+ errors, not just quit.
+ (font-lock-mode): progress -> display-progress
+ (font-lock-default-fontify-buffer): ditto.
+ (font-lock-fontify-syntactically-region): ditto.
+ (font-lock-fontify-keywords-region): ditto.
+
+2000-03-14 Hrvoje Niksic <hniksic@iskon.hr>
+
+ * cl.el (gensym): Move to here from cl-macs.el.
+ (gentemp): Ditto.
+
+2000-03-16 Andy Piper <andy@xemacs.org>
+
+ * font-lock.el (font-lock-mode): use lprogress and friends for
+ progress management.
+ (font-lock-default-fontify-buffer): ditto.
+ (font-lock-fontify-syntactically-region): ditto.
+ (font-lock-fontify-keywords-region): ditto.
+ (font-lock-revert-cleanup): fix reverting.
+ (font-lock-revert-setup): ditto.
+
+ * gutter-items.el (progress-use-echo-area): new variable. Use the
+ echo area for progress gauges if non-nil.
+ (clear-progress): remove echo area stuff and defer to
+ clear-message.
+ (append-progress): dispatch non-command events after each progress
+ increment. Remove echo area stuff.
+ (abort-progress): remove echo area stuff and defer to
+ display-message.
+ (raw-append-progress): ditto. Dispatch non-command events after
+ gutter redisplay.
+ (display-progress): defer echo area stuff to display-message.
+
+ * gutter-items.el (clear-progress):
+ (abort-progress): indentation changes.
+ (display-progress): don't clear progress.
+ (append-progress): compare messages with equal.
+ (raw-append-progress): use dispatch-non-command-events to flush
+ widget creation events.
+
+2000-03-13 Ben Wing <ben@xemacs.org>
+
+ * abbrev.el:
+ * abbrev.el (abbrev-string-to-be-defined): New.
+ * abbrev.el (inverse-abbrev-string-to-be-defined): New.
+ Changes for use with the menubar.
+
+2000-03-12 Ben Wing <ben@xemacs.org>
+
+ * alist.el (vassoc): moved here from font-menu.el.
+
+ * custom.el (defface): typo fix.
+
+ * dialog.el (yes-or-no-p-dialog-box):
+ * dialog.el (message-box):
+ * files.el (save-some-buffers-1):
+ Put accelerators in the button names.
+
+ * font-lock.el (font-lock-comment-face):
+ * font-lock.el (font-lock-keyword-face):
+ * font-lock.el (font-lock-function-name-face):
+ Fixed some of the colors under MS Windows because the existing
+ default colors were hardly different from black and needed to be
+ made lighter.
+
+ * font-menu.el:
+ * font-menu.el (font-menu-split-long-menu):
+ * font-menu.el (font-menu-family-constructor):
+ * font-menu.el (font-menu-size-constructor):
+ * font-menu.el (font-menu-weight-constructor):
+ * font-menu.el (font-menu-set-font):
+ vassoc moved to alist.el.
+ Accelerators added to all menus.
+ Unused bound var new-props removed.
+
+ * keydefs.el: I did a whole lot of rearranging to put things in a
+ more consistent order and fixed a number of cases where key
+ combinations involving up, down, left, right and so on were
+ defined but the corresponding keypad combinations were not
+ defined.
+
+ * lisp-mode.el:
+ * lisp-mode.el (lisp-interaction-mode-popup-menu):
+ * lisp-mode.el (emacs-lisp-mode):
+ * lisp-mode.el (lisp-interaction-mode):
+ * lisp-mode.el (flet):
+ Added accelerators onto the menus.
+ Made all the different versions of the let function be indented
+ the same way.
+ Undid Steve's easy-menu-ification, because it makes it impossible
+ to have the menubar and popup menus different.
+ Cleaned up the menu; added items for find-function &c and some
+ indenting, and removed debug-on-*.
+
+ * list-mode.el (list-mode-hook):
+ * list-mode.el (list-mode):
+ * list-mode.el (completion-setup-hook):
+ * list-mode.el (display-completion-list):
+ Added support for the :window-height keyword, which is required
+ because of other changes that I made for the file dialog box. I
+ also made the hook variables list-mode-hook and
+ completion-setup-hook and also minibuffer-setup-hook in
+ minibuf.el be permanent-local; see comment in list-mode.el.
+
+ * map-ynp.el (map-y-or-n-p):
+ Added accelerators to the dialog buttons.
+
+ * menubar-items.el (menu-truncate-list):
+ New internal function.
+ * menubar-items.el (submenu-generate-accelerator-spec):
+ * menubar-items.el (menu-item-strip-accelerator-spec):
+ * menubar-items.el (menu-item-generate-accelerator-spec):
+ New exported functions, for use in auto-generating accelerator specs.
+
+ * menubar-items.el:
+ * menubar-items.el (default-menubar):
+ * menubar-items.el (maybe-add-init-button):
+ * menubar-items.el (bookmark-menu-filter):
+ * menubar-items.el (slow-format-buffers-menu-line):
+ * menubar-items.el (build-buffers-menu-internal):
+ * menubar-items.el (language-environment-menu-filter):
+ * menubar-items.el (default-popup-menu):
+ * menubar-items.el (popup-buffer-menu):
+ * menubar-items.el (popup-menubar-menu):
+ Did a major overhaul on this file, and in fact I'm nowhere near
+ done working on the menubar, and there will be more patches to
+ come. A basic summary of what I've done:
+
+ a) I added accelerators to all of the menu items. For menus that
+ are auto-generated, such as the buffers menu, the accelerators are
+ automatically added to the beginning of each line using the
+ numbers 1 through 9, then zero, and then letters starting with A,
+ but omitting the letters that are already in use for the fixed
+ menu items at the top of the buffers menu. To facilitate adding
+ accelerators of this kind, I created some new functions
+ (*-accelerator-spec), which are also being used by other filters
+ that auto generate lists of things such as ftp sites to download
+ packages. If people really don't like these accelerators
+ appearing at the beginning of the menu items, a variable can be
+ added to optionally turn them off, but I think this is rather
+ pointless because other menu items have accelerators and many or
+ most of the menu users will use the accelerators if the support is
+ there.
+
+ b) I combined the top level Tools and Apps menus into a single
+ Tools menu, because the distinction between the two is not
+ obvious, and the items on the menus are not used often enough that
+ putting some of them onto submenus is a problem.
+
+ c) I created two new top level menus called View and Cmds because
+ there were too many items on the File and Edit menus, and I'm going
+ to be adding more items to these menus. In contrast to the Tools
+ menu, the items on these menus may be used quite often during an
+ editing session, and so should be available with fewer
+ keystrokes.
+
+ d) I added a number of options to the options menu, including one
+ for controlling whether the alt key can be used to traverse to
+ menu items using the accelerators, one for controlling behavior of
+ control-k, one for controlling how the kill and yank functions
+ interact with the clipboard, a few additional buffers-menu
+ options, and various other things. I also did a bit of
+ rearranging, for example, combining the keyboard and mouse options
+ into a single keyboard and mouse submenu to facilitate the
+ accelerators on that level.
+
+ e) I changed the variable buffers-menu-format-buffer-line-function
+ to take two arguments instead of one, the second argument being
+ the line number for use in creating an accelerator. I added a
+ hack to support existing functions with one argument (although I
+ doubt that very many of these exist), for backward compatibility.
+
+ f) I moved the top level mule menu to be a submenu of the edit
+ menu. I think that most of the items on this menu are fairly
+ useless and there are certainly not enough frequently used items
+ to justify this being its own top level menu.
+
+ g) I combined most of the items in big-menubar.el into the main menu.
+ If people think the main menu is too big, it would be possible to
+ create different configurations, some smaller.
+
+ * menubar.el (check-menu-syntax):
+ Deleted some syntax checks that were no longer valid, partly
+ because of changes that were already made a long time ago, and
+ partly because of a change I made where I allow the name of the
+ menu item to be an evaluated expression rather than just a string,
+ similar to all of the other parameters of a menu item.
+
+ * minibuf.el:
+ * minibuf.el (read-file-name-1):
+ * minibuf.el (mouse-read-file-name-1):
+ I made a number of changes to improve the appearance
+ and functioning of the file dialog box. They include:
+
+ a) Fixing the problem where closing the dialog box by clicking on
+ the close button of the window didn't properly exit the
+ minibuffer.
+
+ b) Fixing the problem that if you typed part of a file name, and
+ then clicked on a completion with the mouse, the file was not
+ correctly selected.
+
+ c) Changing the title of the dialog box to reflect the operation
+ being done in accordance with user interface conventions, rather
+ than the name of the dialog box buffer, which is rather useless.
+
+ d) Remove the words "possible completions are" which didn't
+ belong.
+
+ e) Fix things so that the completions scroll off the end of the
+ completions windows only to the right, rather than both to the
+ right and down, which is in accordance with Windows user interface
+ conventions.
+
+ * msw-init.el (init-post-mswindows-win):
+ Added a binding for meta-F4, which is the standard windows binding
+ for exiting a program.
+
+ * select.el (get-selection-no-error):
+ * select.el (own-selection):
+ * select.el (own-clipboard):
+ Added an optional argument called append to the functions
+ own-selection and own-clipboard. This adds support for appending
+ text to the existing selection and allows the function
+ own-clipboard to be used as the value of the variable
+ interprogram- cut-function.
+
+ Fixed a bug in own-selection in handling zmacs-region-stays.
+
+ * simple.el (historical-kill-line): New.
+
+ * simple.el (kill-line):
+ * simple.el (interprogram-cut-function):
+ * simple.el (interprogram-paste-function):
+ * simple.el (handle-pre-motion-command):
+ * simple.el (next-line):
+ * simple.el (previous-line):
+ a) Expanded the variable kill-whole-line, so that function
+ kill-line can be set to delete the entire line always, not just
+ when cursor is at the beginning of the line. This is controlled
+ by setting the variable kill-whole-line to the symbol 'always.
+ This behavior, as well as the existing kill-whole-line behavior,
+ now only take effect when kill-line is called interactively,
+ although this is a departure from a previous behavior in the case
+ of setting this variable kill-whole-line to t. It is almost
+ certainly what has always been intended, and most likely the old
+ way of doing things introduced bugs. I also created a function
+ called historical-kill-line, which ignores the kill-whole-line
+ setting and always gives the historical behavior of only killing
+ to the end of the line. I bound this function to shift- control-k
+ so that the kill to end of line behavior is available, even when
+ kill-whole-line has been set to change control-k into the simple
+ delete-whole-line behavior. (This can be set using the options
+ menu.)
+
+ b) I changed things so that kill and yank now interact with the
+ clipboard by default under windows. This was done by changing the
+ default value of interprogram-cut- function and
+ interprogram-paste-function. You can get the old behavior by
+ setting these to nil, and there is an option on the options menu
+ to do this.
+
+ c) I added support for selecting text using shifted motion keys.
+ This support is on by default and can be controlled by the
+ variable shifted-motion-keys-select-region. There is also a
+ variable called unshifted-motion-keys-deselect-region that
+ controls more specifically how the shifted motion key behavior
+ works. I did not put an option on the options menu to turn this
+ off, because I can't imagine why this would be useful.
+
+ * simple.el (forward-block-of-lines):
+ * simple.el (backward-block-of-lines):
+ * simple.el (block-movement-size):
+ New.
+
+ * simple.el (uncapitalized-title-words):
+ * simple.el (uncapitalized-title-word-regexp):
+ * simple.el (capitalize-string-as-title):
+ * simple.el (capitalize-region-as-title):
+ New.
+
+
+ * subr.el (add-hook):
+ * subr.el (make-local-hook): New.
+ * subr.el (remove-local-hook): New.
+ * subr.el (add-one-shot-hook): New.
+ * subr.el (add-local-one-shot-hook): New.
+ Added some functions to make using hooks easier.
+ These include:
+
+ a) Functions add-local-hook and remove-local-hook to make it easy
+ to use local hooks.
+
+ b) Functions add-one-shot-hook and add-local-one-shot-hook, which
+ make it possible to add a "one-shot" hook, which is to say a hook
+ that runs only once, and automatically removes itself after the
+ first time it has run.
+
+2000-03-09 Andy Piper <andy@xemacs.org>
+
+ * files.el (auto-mode-alist): pick up jsp, jhtml and xml files.
+
+2000-03-09 Yoshiki Hayashi <yoshiki@xemacs.org>
+
+ * buff-menu.el (buffers-menu-omit-invisible-buffers):
+ Moved from menubar-items.el.
+ * dumped-lisp.el: Dump gutter-items regardless of menubar.
+
+2000-03-08 Andy Piper <andy@xemacs.org>
+
+ * gutter-items.el (build-buffers-tab-internal): add selected field
+ to buffers tab spec.
+
+2000-03-07 Yoshiki Hayashi <yoshiki@xemacs.org>
+
+ * minibuf.el (last-exact-completion): Initialize to nil.
+
+2000-03-07 Didier Verna <didier@xemacs.org>
+
+ * startup.el (command-line-1): remove unused variable
+ `first-file-buffer'.
+
+2000-02-29 Hrvoje Niksic <hniksic@iskon.hr>
+
+ * loaddefs.el (completion-ignored-extensions): Removed ".log",
+ which is also used for Web server log files.
+
+2000-02-03 IKEYAMA Tomonori <tomonori@suiyokai.org>
+
+ * mule/mule-charset.el: Setup auto-fill-chars.
+
+2000-03-02 SL Baur <steve@beopen.com>
+
+ * subr.el (with-string-as-buffer-contents): Reimplement using
+ `with-temp-buffer'. Fixes non-unique buffer name problem, fixes
+ non-deletion of buffer after execution problem.
+ (with-output-to-string): Use unique buffer name.
+
+2000-02-29 Stephen J. Turnbull <stephen@xemacs.org>
+
+ * gutter-items.el (buffers-tab-sort-function): New variable.
+ (buffers-tab-items): Funcall it to sort the buffer tab list.
+
+2000-02-29 Stephen J. Turnbull <stephen@xemacs.org>
+
+ * startup.el (load-user-init-file): Merge two `if's to one `or'.
+
+2000-02-28 Martin Buchholz <martin@xemacs.org>
+
+ * menubar-items.el (maybe-add-init-button): Remove the "Load
+ .emacs" button from all menubars.
+
+2000-03-01 Didier Verna <didier@xemacs.org>
+
+ * rect.el (string-rectangle): depend on `pending-delete-mode' for
+ region rectangle replacement (from Jan Vroonhof).
+ (replace-rectangle): new function.
+
+2000-01-05 Yoshiki Hayashi <t90553@mail.ecc.u-tokyo.ac.jp>
+
+ * mule/mule-cmds.el (set-default-coding-systems): Use
+ set-terminal-coding-system and set-keyboard-coding-system.
+ * coding.el (set-terminal-coding-system): Use
+ set-console-tty-output-coding-system.
+ (set-keyboard-coding-system): Use
+ set-console-tty-input-coding-system.
+
+2000-02-21 Yoshiki Hayashi <yoshiki@xemacs.org>
+
+ * minibuf.el (read-variable): Allow symbol to default argument.
+
+2000-02-27 Andy Piper <andy@xemacs.org>
+
+ * gutter-items.el (update-tab-hook): new function to be used for
+ hooks.
+ (create-frame-hook): add update-tab-hook.
+ (record-buffer-hook): ditto.
+ (default-gutter-position-changed): ditto.
+ (default-gutter-position): updating the buffers tab is now handled
+ by a hook.
+ (default-gutter-position-changed-hook): new variable.
+ (gutter-element-visibility-changed-hook): ditto.
+ (set-gutter-element-visible-p): call it.
+ (set-gutter-element): use modify-specifier-instances. Set extents
+ as duplicable before using.
+ (remove-gutter-element): ditto.
+ (set-gutter-element-visible-p): ditto.
+ (init-gutter): new function.
+ (add-tab-to-gutter): use new gutter-element functions rather than
+ setting specifiers directly.
+ (clear-progress): ditto.
+ (abort-progress): ditto.
+ (gutter-buffers-tab-visible-p): renamed from
+ default-gutter-visible-p
+
+ * specifier.el (modify-specifier-instances): new function from Jan
+ Vroonhof.
+
+ * x-init.el (init-post-x-win): call init-gutter.
+
+ * msw-init.el (init-post-mswindows-win): call init-gutter.
+
+ * menubar-items.el (default-menubar): Update to reflect new gutter
+ variables.
+
+2000-02-26 Andy Piper <andy@xemacs.org>
+
+ * gutter-items.el (set-gutter-element): new function. Add gutter
+ elements to the specified gutter.
+ (remove-gutter-element): new function. Remove gutter elements from
+ the specified gutter.
+ (set-gutter-element-visible-p): new function. Set gutter element
+ visibility for the provided gutter-visible specifier.
+
+2000-02-23 Andy Piper <andy@xemacs.org>
+
+ * gutter-items.el (add-tab-to-gutter): specify dimensions
+ dynamically.
+
+2000-02-24 Martin Buchholz <martin@xemacs.org>
+
+ * gutter-items.el (add-tab-to-gutter):
+ * package-get.el (package-get-interactive-package-query):
+ * package-ui.el (pui-directory-exists):
+ (pui-install-selected-packages):
+ (pui-list-packages):
+ Use #'(lambda ...) instead of '(lambda ...).
+
+2000-02-21 Gregory Neil Shapiro <gshapiro@gshapiro.net>
+
+ * startup.el (load-user-init-file): Check to make sure user
+ has an init-file before calling load().
+
+2000-02-20 Kirill 'Big K' Katsnelson <kkm@dtmx.com>
+
+ * msw-glyphs.el (msgdi-device-p): Added this and 'msgdi specifier tag.
+
+2000-02-23 Martin Buchholz <martin@xemacs.org>
+
+ * XEmacs 21.2.31 is released.
+
+2000-02-21 Mike Sperber <mike@xemacs.org>
+
+ * loadup.el (really-early-error-handler):
+ * update-elc.el:
+ * make-docfile.el:
+ Remove dependency on EMACSBOOTSTRAP... environment variables.
+
2000-02-21 Martin Buchholz <martin@xemacs.org>
* XEmacs 21.2.30 is released.
2000-02-19 Martin Buchholz <martin@xemacs.org>
- * byte-optimize.el (byte-optimize-plus):
- (byte-optimize-minus):
- (byte-optimize-multiply):
+ * byte-optimize.el (byte-optimize-plus):
+ (byte-optimize-minus):
+ (byte-optimize-multiply):
Optimize (- 0) to 0, not (-)
Optimize (+ 5 3.0) to 8.0
Optimize (* 5 3.0) to 15.0
defaults.
2000-02-09 Stef Epardaud <stef@lunatech.com>
-
- * font-lock.el: Javadoc enhancements
+
+ * font-lock.el: Javadoc enhancements
1999-11-27 Oscar Figueiredo <Oscar.Figueiredo@di.epfl.ch>
Conditionalize message display on ldap-verbose
(ldap-add-entries, ldap-modify-entries, ldap-delete-entries): New
defuns
- (ldap-search): Is now defined as an obsolete wrapper calling
+ (ldap-search): Is now defined as an obsolete wrapper calling
ldap-search-basic or ldap-search-entries
-1999-12-06 Hirokazu FUKUI <hfukui@sannet.ne.jp>
+1999-12-06 Hirokazu FUKUI <hfukui@sannet.ne.jp>
Shuhei KOBAYASHI <shuhei@aqua.ocn.ne.jp>
Jan Vroonhof <jan@xemacs.org>
-
- * byte-optimize.el (byte-optimize-form-code-walker): Fixed.
- When for-effect is true, didn't call `byte-optimize-form'
- in and/or subforms without last.
-
-1999-12-07 Jan Vroonhof <vroonhof@math.ethz.ch>
-
- * package-get.el (package-get-download-sites): Use correct custom
- type.
-
+
+ * byte-optimize.el (byte-optimize-form-code-walker): Fixed.
+ When for-effect is true, didn't call `byte-optimize-form'
+ in and/or subforms without last.
+
+1999-12-07 Jan Vroonhof <vroonhof@math.ethz.ch>
+
+ * package-get.el (package-get-download-sites): Use correct custom
+ type.
+
2000-02-15 Kirill 'Big K' Katsnelson <kkm@dtmx.com>
* files.el (write-file): Ask for coding system when compiled with
unexist function to help-map.
(describe-coding-system): Don't use already assigend `C'.
-2000-01-23 Björn Torkelsson <torkel@hpc2n.umu.se>
+2000-01-23 Bjrn Torkelsson <torkel@hpc2n.umu.se>
* info.el (Info-save-auto-generated-dir): nil -> 'never to make it
work in custom.
part of the tag entry first instead of only looking in
the context area.
-2000-01-23 Björn Torkelsson <torkel@hpc2n.umu.se>
+2000-01-23 Bjrn Torkelsson <torkel@hpc2n.umu.se>
* gutter-items.el: fixed typo(s) in customizing default-gutter-position
* toobar.el: fixed typo(s) in customizing default-toolbar-position
2000-02-02 Per Abrahamsen <abraham@dina.kvl.dk>
* wid-edit.el (widget-match-inline): An atom never matches a
- list.
+ list.
2000-01-29 Kirill 'Big K' Katsnelson <kkm@dtmx.com>
2000-01-28 Martin Buchholz <martin@xemacs.org>
- * coding.el (dontusethis-set-value-file-name-coding-system-handler):
- (dontusethis-set-value-terminal-coding-system-handler):
- (dontusethis-set-value-keyboard-coding-system-handler):
+ * coding.el (dontusethis-set-value-file-name-coding-system-handler):
+ (dontusethis-set-value-terminal-coding-system-handler):
+ (dontusethis-set-value-keyboard-coding-system-handler):
Never undefine coding system aliases. Emergency fix for gnus.
2000-01-26 Hrvoje Niksic <hniksic@iskon.hr>
* process.el (shell-quote-argument): Use (nt-quote-process-args)
for windows-nt.
- * version.el:
- * startup.el (user-init-file-base):
- * process.el (call-process-region):
- * files.el (make-backup-file-name):
- (backup-file-name-p):
- (file-relative-name):
- (abbreviate-file-name):
- (set-auto-mode):
+ * version.el:
+ * startup.el (user-init-file-base):
+ * process.el (call-process-region):
+ * files.el (make-backup-file-name):
+ (backup-file-name-p):
+ (file-relative-name):
+ (abbreviate-file-name):
+ (set-auto-mode):
* code-process.el (call-process-region): Removed unnecessary
branching on 'windows-nt and 'ms-dos system types. Phased 'ms-dos
support out of the universe.
* process.el:
- * code-process.el:
+ * code-process.el:
* bytecomp.el (byte-compile-file): Removed reference to
buffer-file-type, and commented usage of binary-process-output
NTEmacs variables.
(ldap-encode-string): Guard against `encode-coding-string' not
being defined
-1999-08-23 Didier Verna <verna@inf.enst.fr>
+1999-08-23 Didier Verna <didier@xemacs.org>
* rect.el: Cosmetics suggested by Dave Love <d.love@dl.ac.uk>.
Some doc strings improvements, and add a star to the `interactive'
* gutter-items.el (remove-buffer-from-gutter-tab): fix *scratch*
deletion problem.
-1999-07-30 Didier Verna <verna@inf.enst.fr>
+1999-07-30 Didier Verna <didier@xemacs.org>
* cus-edit.el (custom-save-variables): I said, use prin1 instead
of princ to output symbols.
(custom-save-face-internal): ditto.
(custom-save-resets): ditto.
-1999-08-09 Didier Verna <verna@inf.enst.fr>
+1999-08-09 Didier Verna <didier@xemacs.org>
* gutter-items.el (select-buffers-tab-buffers-by-mode): use
`regexp-quote' to protect the major mode name for use as a regular
doc-directory.
From Karl M. Hegbloom <karlheg@cathcart.sysc.pdx.edu>
-1999-07-19 Didier Verna <verna@inf.enst.fr>
+1999-07-19 Didier Verna <didier@xemacs.org>
* rect.el: all functions rewritten, except when noted. Below is a
list of interface changes.
* gui.el (make-dialog-frame): turn off gutters for dialogs.
-1999-07-15 Didier Verna <verna@inf.enst.fr>
+1999-07-15 Didier Verna <didier@xemacs.org>
* cus-edit.el (custom-prompt-variable): optional third arg makes
prompt for a comment string.
* simple.el (delete-key-deletes-forward): Revert to previous
behavior.
-1999-01-18 Didier Verna <verna@inf.enst.fr>
+1999-01-18 Didier Verna <didier@xemacs.org>
* menubar-items.el (xemacs-splash-buffer): handle the case of
multiple elements in the splash buffer body.
* package-get.el (package-get-custom): don't load
package-get-custom as it is auto-generated. Fix group definition.
-1999-03-05 Didier Verna <verna@inf.enst.fr>
+1999-03-05 Didier Verna <didier@xemacs.org>
* cus-dep.el (Custom-make-dependencies): use `prin1-to-string'
instead of `symbol-name' (Thanks Kyle).
* font-lock.el (font-lock-revert-cleanup): Null out to avoid repeated
calls to font-lock during buffer reversion.
-1999-02-12 Didier Verna <verna@inf.enst.fr>
+1999-02-12 Didier Verna <didier@xemacs.org>
* info.el (Info-build-node-completions): unconditionally widen the
tag table buffer.
* XEmacs 21.2.9 is released
-1999-01-19 Didier Verna <verna@inf.enst.fr>
+1999-01-19 Didier Verna <didier@xemacs.org>
* replace.el (replace-search-function): new variable containing a
function to perform a search-forward.
to perform a re-search-forward.
(perform-replace): use them.
-1999-01-25 Didier Verna <verna@inf.enst.fr>
+1999-01-25 Didier Verna <didier@xemacs.org>
* select.el (selection-owner-p): use the name `XEmacs'.
(cut-copy-clear-internal): ditto.
* minibuf.el (minibuffer-completion-table): ditto.
* cl-macs.el (return-from): ditto.
-1999-01-04 Didier Verna <verna@inf.enst.fr>
+1999-01-04 Didier Verna <didier@xemacs.org>
* replace.el (delete-non-matching-lines): temporarily disable
case-folding when called interactively with a regexp containing
(pui-list-packages): Add warning when `package-get-remote' is nil.
(package-ui-add-site): New function.
-1998-12-01 Didier Verna <verna@inf.enst.fr>
+1998-12-01 Didier Verna <didier@xemacs.org>
* hyper-apropos.el (hyper-where-is): added the missing autoload.
* package-get-base.el: removed.
-1998-09-23 Didier Verna <verna@inf.enst.fr>
+1998-09-23 Didier Verna <didier@xemacs.org>
* simple.el (search-caps-disable-folding): moved from isearch-mode.el
(no-upper-case-p): new function.
* lisp-mode.el (with-string-as-buffer-contents): Set indentation.
-1998-07-17 Didier Verna <verna@inf.enst.fr>
+1998-07-17 Didier Verna <didier@xemacs.org>
* faces.el (set-face-property):
(set-face-dim-p):
`save-some-buffers'.
(save-some-buffers): Force redisplay only if windows were deleted.
-1998-06-02 Didier Verna <verna@inf.enst.fr>
+1998-06-02 Didier Verna <didier@xemacs.org>
* cus-face.el (custom-face-attributes): generalized the use of
toggle buttons for boolean attributes.
* simple.el (zap-up-to-char): New function. Behaves like `zap-to-char'
in Emacs 18.
-1998-05-13 Didier Verna <verna@inf.enst.fr>
+1998-05-13 Didier Verna <didier@xemacs.org>
* mouse.el (drag-window-divider): give the vertical divider a
pressed look when dragging it.
* default.el: Removed.
* site-start.el: Removed.
-1998-04-29 Didier Verna <verna@inf.enst.fr>
+1998-04-29 Didier Verna <didier@xemacs.org>
* minibuf.el (minibuffer-history-minimum-string-length): Default
to nil.
* msw-glyphs.el: enable graphics support.
-1998-04-23 Didier Verna <verna@inf.enst.fr>
+1998-04-23 Didier Verna <didier@xemacs.org>
* x-menubar.el (default-menubar): restored the line-number-mode
option.
* package-get.el (package-get-all): add `\n' separator to
interactive specification so that both variables are read
-1998-04-22 Didier Verna <verna@inf.enst.fr>
+1998-04-22 Didier Verna <didier@xemacs.org>
* x-menubar.el: ported the options menu to Custom.
Moved the "read only" toggle button to the buffers menu.
1998-04-16 SL Baur <steve@altair.xemacs.org>
* files.el (toggle-read-only): Fix docstring.
- From Didier Verna <verna@inf.enst.fr>
+ From Didier Verna <didier@xemacs.org>
1998-04-14 Michael Sperber [Mr. Preprocessor] <sperber@informatik.uni-tuebingen.de>
windows on the currently selected fgrame before searching
other frames.
-1998-02-25 Didier Verna <verna@inf.enst.fr>
+1998-02-25 Didier Verna <didier@xemacs.org>
* modeline.el (modeline-swap-buffers): originally named
`mouse-release-modeline'. Whether to actually swap the buffers is
configuration, hosing temp-buffer-show-function.
-1998-02-23 Didier Verna <verna@inf.enst.fr>
+1998-02-23 Didier Verna <didier@xemacs.org>
* modeline.el (mouse-drag-modeline):
- Always scroll the modeline that was originally clicked on.
keep on dragging the modeline even if the motion event occurs in
another window.
-1998-02-23 Didier Verna <verna@inf.enst.fr>
+1998-02-23 Didier Verna <didier@xemacs.org>
* x-mouse.el (x-init-pointer-shape): use a crossed-arrows cursor
glyph on the modeline to indicate that dragging the mouse has an
Prevents display flickering when the mouse pointer
moves.
-1998-02-17 Didier Verna <verna@inf.enst.fr>
+1998-02-17 Didier Verna <didier@xemacs.org>
* mouse.el (default-mouse-track-set-point-in-window): rewrote this
function to handle correctly the case of a toolbar one side of the
* loadup.el: test-atoms debugging stuffs removed.
-1998-02-03 Martin Buchholz <Martin Buchholz <martin@xemacs.org>>
+1998-02-03 Martin Buchholz <Martin Buchholz <martin@xemacs.org>
* lisp/loaddefs.el (completion-ignored-extensions): Add ".class"
* (abbrev-mode): (put)'ed a `:menu-tag' on it and
`auto-fill-function'.
-1998-01-02 Karl M. Hegbloom <<karlheg@bittersweet.inetarena.com>>
+1998-01-02 Karl M. Hegbloom <karlheg@bittersweet.inetarena.com>
* modeline.el (modeline-minor-mode-menu): Changed the string-only
menus to :style 'toggle.
(toolbar-mail-reader): Add support for `send'.
From Jonathan Marten <jonathan.marten@UK.Sun.COM>
-1998-01-05 Karl M. Hegbloom <<karlheg@bittersweet.inetarena.com>>
+1998-01-05 Karl M. Hegbloom <karlheg@bittersweet.inetarena.com>
* info.el (Info-emacs-info-file-name): Add defvar for
`Info-emacs-info-file-name' so that `Info-goto-emacs-command-node'
* packages.el (package-require): Update to reflect new data format.
-1998-01-02 Didier Verna <verna@inf.enst.fr>
+1998-01-02 Didier Verna <didier@xemacs.org>
* x-menubar.el (default-menubar): make the tutorials available
through the menubar. (Plus some compilation warnings cleanup).
* cl.el (eql): Compare integers with `eq'.
(cl-map-extents): Check for `map-extents' first.
-1997-12-17 Didier Verna <verna@inf.enst.fr>
+1997-12-17 Didier Verna <didier@xemacs.org>
* leim/quail/latin-pre.el ("french-prefix"): doc string cleanup +
added the 'numero', 'copyright' and 'trademark' symbols.