--- /dev/null
+;; font-menu.el --- Managing menus of fonts.
+
+;; Copyright (C) 1994 Free Software Foundation, Inc.
+;; Copyright (C) 1995 Tinker Systems and INS Engineering Corp.
+;; Copyright (C) 1997 Sun Microsystems
+
+;; Adapted from x-font-menu.el by Andy Piper <andy@xemacs.org>
+
+;; This file is part of XEmacs.
+
+;; XEmacs is free software; you can redistribute it and/or modify it
+;; under the terms of the GNU General Public License as published by
+;; the Free Software Foundation; either version 2, or (at your option)
+;; any later version.
+
+;; XEmacs is distributed in the hope that it will be useful, but
+;; WITHOUT ANY WARRANTY; without even the implied warranty of
+;; MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU
+;; General Public License for more details.
+
+;; You should have received a copy of the GNU General Public License
+;; along with XEmacs; see the file COPYING. If not, write to the
+;; Free Software Foundation, 59 Temple Place - Suite 330,
+;; Boston, MA 02111-1307, USA.
+
+;; This file contains the device-nospecific font menu stuff
+
+;;; Commentary:
+;;;
+;;; Creates three menus, "Font", "Size", and "Weight", and puts them on the
+;;; "Options" menu. The contents of these menus are the superset of those
+;;; properties available on any fonts, but only the intersection of the three
+;;; sets is selectable at one time.
+;;;
+;;; Known Problems:
+;;; ===============
+;;; Items on the Font menu are selectable if and only if that font exists in
+;;; the same size and weight as the current font. This means that some fonts
+;;; are simply not reachable from some other fonts - if only one font comes
+;;; in only one point size (like "Nil", which comes only in 2), you will never
+;;; be able to select it. It would be better if the items on the Fonts menu
+;;; were always selectable, and selecting them would set the size to be the
+;;; closest size to the current font's size.
+;;;
+;;; This attempts to change all other faces in an analogous way to the change
+;;; that was made to the default face; if it can't, it will skip over the face.
+;;; However, this could leave incongruous font sizes around, which may cause
+;;; some nonreversibility problems if further changes are made. Perhaps it
+;;; should remember the initial fonts of all faces, and derive all subsequent
+;;; fonts from that initial state.
+;;;
+;;; xfontsel(1) is a lot more flexible (but probably harder to understand).
+;;;
+;;; The code to construct menus from all of the x11 fonts available from the
+;;; server is autoloaded and executed the very first time that one of the Font
+;;; menus is selected on each device. That is, if XEmacs has frames on two
+;;; different devices, then separate font menu information will be maintained
+;;; for each X display. If the font path changes after emacs has already
+;;; asked the X server on a particular display for its list of fonts, this
+;;; won't notice. Also, the first time that a font menu is posted on each
+;;; display will entail a lengthy delay, but that's better than slowing down
+;;; XEmacs startup. At any time (i.e.: after a font-path change or
+;;; immediately after device creation), you can call
+;;; `reset-device-font-menus' to rebuild the menus from all currently
+;;; available fonts.
+;;;
+;;; There is knowledge here about the regexp match numbers in
+;;; `mswindows-font-regexp' and `mswindows-font-regexp-foundry-and-family' defined in
+;;; mswindows-faces.el.
+;;;
+;;; There are at least three kinds of fonts under X11r5:
+;;;
+;;; - bitmap fonts, which can be assumed to look as good as possible;
+;;; - bitmap fonts which have been (or can be) automatically scaled to
+;;; a new size, and which almost always look awful;
+;;; - and true outline fonts, which should look ok at any size, but in
+;;; practice (on at least some systems) look awful at any size, and
+;;; even in theory are unlikely ever to look as good as non-scaled
+;;; bitmap fonts.
+;;;
+;;; It would be nice to get this code to look for non-scaled bitmap fonts
+;;; first, then outline fonts, then scaled bitmap fonts as a last resort.
+;;; But it's not clear to me how to tell them apart based on their truenames
+;;; and/or the result of XListFonts(). I welcome any and all explanations
+;;; of the subtleties involved...
+;;;
+;;;
+;;; If You Think You'Re Seeing A Bug:
+;;; =================================
+;;; When reporting problems, send the following information:
+;;;
+;;; - Exactly what behavior you're seeing;
+;;; - The output of the `xlsfonts' program;
+;;; - The value of the variable `device-fonts-cache';
+;;; - The values of the following expressions, both before and after
+;;; making a selection from any of the fonts-related menus:
+;;; (face-font 'default)
+;;; (font-truename (face-font 'default))
+;;; (font-properties (face-font 'default))
+;;; - The values of the following variables after making a selection:
+;;; font-menu-preferred-resolution
+;;; font-menu-registry-encoding
+;;;
+;;; There is a common misconception that "*-courier-medium-r-*-11-*", also
+;;; known as "-adobe-courier-medium-r-normal--11-80-100-100-m-60-iso8859-1",
+;;; is an 11-point font. It is not -- it is an 11-pixel font at 100dpi,
+;;; which is an 8-point font (the number after -11- is the size in tenths
+;;; of points). So if you expect to be seeing an "11" entry in the "Size"
+;;; menu and are not, this may be why.
+;;;
+;;; In the real world (aka Solaris), one has to deal with fonts that
+;;; appear to be medium-i but are really light-r, and fonts that
+;;; resolve to different resolutions depending on the charset:
+;;;
+;;; (font-instance-truename
+;;; (make-font-instance "-*-mincho-medium-i-normal-*-*-*-*-*-*-*-jisx0201*-*"))
+;;; ==>
+;;; "-morisawa-ryumin light kl-light-r-normal--10-100-72-72-m-50-jisx0201.1976-0"
+;;;
+;;; (list-fonts "-dt-interface user-medium-r-normal-s*-*-*-*-*-*-*-*-*")
+;;; ==>
+;;; ("-dt-interface user-medium-r-normal-s sans-12-120-72-72-m-70-iso8859-1"
+;;; "-dt-interface user-medium-r-normal-s-14-120-75-75-m-120-jisx0208.1983-0"
+;;; "-dt-interface user-medium-r-normal-s-14-120-75-75-m-60-jisx0201.1976-0")
+
+;;;###autoload
+(defcustom font-menu-ignore-scaled-fonts nil
+ "*If non-nil, then the font menu will try to show only bitmap fonts."
+ :type 'boolean
+ :group 'font-menu)
+
+;;;###autoload
+(defcustom font-menu-this-frame-only-p nil
+ "*If non-nil, then changing the default font from the font menu will only
+affect one frame instead of all frames."
+ :type 'boolean
+ :group 'font-menu)
+
+(defcustom font-menu-max-items 25
+ "*Maximum number of items in the font menu
+If number of entries in a menu is larger than this value, split menu
+into submenus of nearly equal length. If nil, never split menu into
+submenus."
+ :group 'font-menu
+ :type '(choice (const :tag "no submenus" nil)
+ (integer)))
+
+(defcustom font-menu-submenu-name-format "%-12.12s ... %.12s"
+ "*Format specification of the submenu name.
+Used by `font-menu-split-long-menu' if the number of entries in a menu is
+larger than `font-menu-menu-max-items'.
+This string should contain one %s for the name of the first entry and
+one %s for the name of the last entry in the submenu.
+If the value is a function, it should return the submenu name. The
+function is be called with two arguments, the names of the first and
+the last entry in the menu."
+ :group 'font-menu
+ :type '(choice (string :tag "Format string")
+ (function)))
+
+(defvar font-menu-preferred-resolution
+ (make-specifier-and-init 'generic '((global ((mswindows) . ":")
+ ((gtk) . "*-*")
+ ((x) . "*-*"))) t)
+ "Preferred horizontal and vertical font menu resolution (e.g. \"75:75\").")
+
+(defvar font-menu-size-scaling
+ (make-specifier-and-init 'integer '((global ((mswindows) . 1)
+ ((gtk) . 10)
+ ((x) . 10))) t)
+ "Scale factor used in defining font sizes.")
+
+;; only call XListFonts (and parse) once per device.
+;; ( (device . [parsed-list-fonts family-menu size-menu weight-menu]) ...)
+(defvar device-fonts-cache nil)
+
+(defsubst device-fonts-cache ()
+ (or (cdr (assq (selected-device) device-fonts-cache))
+ (and (reset-device-font-menus (selected-device))
+ (cdr (assq (selected-device) device-fonts-cache)))))
+
+;;;###autoload
+(fset 'install-font-menus 'reset-device-font-menus)
+(make-obsolete 'install-font-menus 'reset-device-font-menus)
+
+;;;###autoload
+(defun reset-device-font-menus (&optional device debug)
+ "Generates the `Font', `Size', and `Weight' submenus for the Options menu.
+This is run the first time that a font-menu is needed for each device.
+If you don't like the lazy invocation of this function, you can add it to
+`create-device-hook' and that will make the font menus respond more quickly
+when they are selected for the first time. If you add fonts to your system,
+or if you change your font path, you can call this to re-initialize the menus."
+ (message "Getting list of fonts from server... ")
+ (if (or noninteractive
+ (not (or device (setq device (selected-device)))))
+ nil
+ (call-device-method 'reset-device-font-menus device device debug)
+ (message "Getting list of fonts from server... done.")))
+
+(defun font-menu-split-long-menu (menu)
+ "Split MENU according to `font-menu-max-items' and add accelerator specs."
+ (let ((len (length menu)))
+ (if (or (null font-menu-max-items)
+ (null (featurep 'lisp-float-type))
+ (<= len font-menu-max-items))
+ (submenu-generate-accelerator-spec menu)
+ ;; Submenu is max 2 entries longer than menu, never shorter, number of
+ ;; entries in submenus differ by at most one (with longer submenus first)
+ (let* ((outer (floor (sqrt len)))
+ (inner (/ len outer))
+ (rest (% len outer))
+ (result nil))
+ (setq menu (reverse menu))
+ (while menu
+ (let ((in inner)
+ (sub nil)
+ (to (car menu)))
+ (while (> in 0)
+ (setq in (1- in)
+ sub (cons (car menu) sub)
+ menu (cdr menu)))
+ (setq result
+ (cons (cons (if (stringp font-menu-submenu-name-format)
+ (format font-menu-submenu-name-format
+ (menu-item-strip-accelerator-spec
+ (aref (car sub) 0))
+ (menu-item-strip-accelerator-spec
+ (aref to 0)))
+ (funcall font-menu-submenu-name-format
+ (menu-item-strip-accelerator-spec
+ (aref (car sub) 0))
+ (menu-item-strip-accelerator-spec
+ (aref to 0))))
+ (submenu-generate-accelerator-spec sub))
+ result)
+ rest (1+ rest))
+ (if (= rest outer) (setq inner (1+ inner)))))
+ (submenu-generate-accelerator-spec result)))))
+
+;;;###autoload
+(defun font-menu-family-constructor (ignored)
+ (catch 'menu
+ (unless (console-on-window-system-p)
+ (throw 'menu '(["Cannot parse current font" ding nil])))
+ (let* ((dcache (device-fonts-cache))
+ (font-data (font-menu-font-data 'default dcache))
+ (entry (aref font-data 0))
+ (family (aref font-data 1))
+ (size (aref font-data 2))
+ (weight (aref font-data 3))
+ f)
+ (unless family
+ (throw 'menu '(["Cannot parse current font" ding nil])))
+ ;; Items on the Font menu are enabled iff that font exists in
+ ;; the same size and weight as the current font (scalable fonts
+ ;; exist in every size). Only the current font is marked as
+ ;; selected.
+ (font-menu-split-long-menu
+ (mapcar
+ (lambda (item)
+ (setq f (menu-item-strip-accelerator-spec (aref item 0))
+ entry (vassoc f (aref dcache 0)))
+ (if (and (or (member weight (aref entry 1))
+ ;; mswindows often allows any weight
+ (member "" (aref entry 1)))
+ (or (member size (aref entry 2))
+ (and (not font-menu-ignore-scaled-fonts)
+ (member 0 (aref entry 2)))))
+ (enable-menu-item item)
+ (disable-menu-item item))
+ (if (string-equal family f)
+ (select-toggle-menu-item item)
+ (deselect-toggle-menu-item item))
+ item)
+ (aref dcache 1))))))
+
+(define-device-method* font-menu-font-data)
+
+;;;###autoload
+(defun font-menu-size-constructor (ignored)
+ (catch 'menu
+ (unless (console-on-window-system-p)
+ (throw 'menu '(["Cannot parse current font" ding nil])))
+ (let* ((dcache (device-fonts-cache))
+ (font-data (font-menu-font-data 'default dcache))
+ (entry (aref font-data 0))
+ (family (aref font-data 1))
+ (size (aref font-data 2))
+ ;;(weight (aref font-data 3))
+ s)
+ (unless family
+ (throw 'menu '(["Cannot parse current font" ding nil])))
+ ;; Items on the Size menu are enabled iff current font has
+ ;; that size. Only the size of the current font is selected.
+ ;; (If the current font comes in size 0, it is scalable, and
+ ;; thus has every size.)
+ (mapcar
+ (lambda (item)
+ (setq s (nth 3 (aref item 1)))
+ (if (or (member s (aref entry 2))
+ (and (not font-menu-ignore-scaled-fonts)
+ (member 0 (aref entry 2))))
+ (enable-menu-item item)
+ (disable-menu-item item))
+ (if (eq size s)
+ (select-toggle-menu-item item)
+ (deselect-toggle-menu-item item))
+ item)
+ (submenu-generate-accelerator-spec (aref dcache 2))))))
+
+;;;###autoload
+(defun font-menu-weight-constructor (ignored)
+ (catch 'menu
+ (unless (console-on-window-system-p)
+ (throw 'menu '(["Cannot parse current font" ding nil])))
+ (let* ((dcache (device-fonts-cache))
+ (font-data (font-menu-font-data 'default dcache))
+ (entry (aref font-data 0))
+ (family (aref font-data 1))
+ ;;(size (aref font-data 2))
+ (weight (aref font-data 3))
+ w)
+ (unless family
+ (throw 'menu '(["Cannot parse current font" ding nil])))
+ ;; Items on the Weight menu are enabled iff current font
+ ;; has that weight. Only the weight of the current font
+ ;; is selected.
+ (mapcar
+ (lambda (item)
+ (setq w (aref item 0))
+ (if (member w (aref entry 1))
+ (enable-menu-item item)
+ (disable-menu-item item))
+ (if (string-equal weight w)
+ (select-toggle-menu-item item)
+ (deselect-toggle-menu-item item))
+ item)
+ (submenu-generate-accelerator-spec (aref dcache 3))))))
+
+\f
+;;; Changing font sizes
+
+(defun font-menu-set-font (family weight size)
+ ;; This is what gets run when an item is selected from any of the three
+ ;; fonts menus. It needs to be rather clever.
+ ;; (size is measured in 10ths of points.)
+ (let* ((dcache (device-fonts-cache))
+ (font-data (font-menu-font-data 'default dcache))
+ (from-family (aref font-data 1))
+ (from-size (aref font-data 2))
+ (from-weight (aref font-data 3))
+ (from-slant (aref font-data 4))
+ (face-list-to-change (delq 'default (face-list)))
+ new-default-face-font)
+ (unless from-family
+ (signal 'error '("couldn't parse font name for default face")))
+ (when weight
+ (signal 'error '("Setting weight currently not supported")))
+ (setq new-default-face-font
+ (font-menu-load-font
+ (or family from-family)
+ (or weight from-weight)
+ (or size from-size)
+ from-slant
+ (specifier-instance
+ font-menu-preferred-resolution (selected-device))))
+ ;; This is such a gross hack. The border-glyph face under
+ ;; mswindows is in a symbol font. Thus it will not appear in the
+ ;; cache - being a junk family. What we should do is change the
+ ;; size but not the family, but this is more work than I care to
+ ;; invest at the moment.
+ (when (eq (device-type) 'mswindows)
+ (setq face-list-to-change
+ (delq 'border-glyph face-list-to-change)))
+ (dolist (face face-list-to-change)
+ (when (face-font-instance face)
+ (message "Changing font of `%s'..." face)
+ (condition-case c
+ (font-menu-change-face face
+ from-family from-weight from-size
+ (or family from-family)
+ (or weight from-weight)
+ (or size from-size))
+ (error
+ (display-error c nil)
+ (sit-for 1)))))
+ ;; Set the default face's font after hacking the other faces, so that
+ ;; the frame size doesn't change until we are all done.
+
+ ;; If we need to be frame local we do the changes ourselves.
+ (if font-menu-this-frame-only-p
+ ;;; WMP - we need to honor font-menu-this-frame-only-p here!
+ (set-face-font 'default new-default-face-font
+ (and font-menu-this-frame-only-p (selected-frame)))
+ ;; OK Let Customize do it.
+ (custom-set-face-update-spec 'default
+ (list (list 'type (device-type)))
+ (list :family (or family from-family)
+ :size (concat
+ (int-to-string
+ (/ (or size from-size)
+ (specifier-instance font-menu-size-scaling
+ (selected-device))))
+ "pt")))
+ (message "Font %s" (face-font-name 'default)))))
+
+
+(defun font-menu-change-face (face
+ from-family from-weight from-size
+ to-family to-weight to-size)
+ (check-type face symbol)
+ (let* ((dcache (device-fonts-cache))
+ (font-data (font-menu-font-data face dcache))
+ (face-family (aref font-data 1))
+ (face-size (aref font-data 2))
+ (face-weight (aref font-data 3))
+ (face-slant (aref font-data 4)))
+
+ (or face-family
+ (signal 'error (list "couldn't parse font name for face" face)))
+
+ ;; If this face matches the old default face in the attribute we
+ ;; are changing, then change it to the new attribute along that
+ ;; dimension. Also, the face must have its own global attribute.
+ ;; If its value is inherited, we don't touch it. If any of this
+ ;; is not true, we leave it alone.
+ (when (and (face-font face 'global)
+ (cond
+ (to-family (string-equal face-family from-family))
+ (to-weight (string-equal face-weight from-weight))
+ (to-size (= face-size from-size))))
+ (set-face-font face
+ (font-menu-load-font (or to-family face-family)
+ (or to-weight face-weight)
+ (or to-size face-size)
+ face-slant
+ (specifier-instance
+ font-menu-preferred-resolution
+ (selected-device)))
+ (and font-menu-this-frame-only-p
+ (selected-frame))))))
+
+(define-device-method font-menu-load-font)
+
+(defun flush-device-fonts-cache (device)
+ ;; by Stig@hackvan.com
+ (let ((elt (assq device device-fonts-cache)))
+ (and elt
+ (setq device-fonts-cache (delq elt device-fonts-cache)))))
+
+(add-hook 'delete-device-hook 'flush-device-fonts-cache)
+
+(provide 'font-menu)
+
+;; font-menu ends here