@c
@ifset XEMACS
-@macro emacs
-XEmacs
-@end macro
+@set emacs XEmacs
@clear EMACS
-@set HAVE_EMACS
+@set HAVE-EMACS
@end ifset
@ifset EMACS
-@macro emacs
-Emacs
-@end macro
+@set emacs Emacs
@clear XEMACS
-@set HAVE_EMACS
+@set HAVE-EMACS
@end ifset
-@ifclear HAVE_EMACS
+@ifclear HAVE-EMACS
@set XEMACS
-@macro emacs
-XEmacs
-@end macro
+@set emacs XEmacs
@end ifclear
@ifinfo
-This file documents the module loading technology of @emacs{}.
+This file documents the module loading technology of @value{emacs}.
Copyright @copyright{} 1998 J. Kean Johnston.
@finalout
@titlepage
-@title Extending @emacs{} using C and C++
+@title Extending @value{emacs} using C and C++
@subtitle Version 1.0, September 1998
@author J. Kean Johnston
@ifinfo
@node Top, Introduction, (dir), (dir)
-This Info file contains v1.0 of the @emacs{} dynamic loadable module
+This Info file contains v1.0 of the @value{emacs} dynamic loadable module
support documentation.
@menu
* Introduction:: Introducing Emacs Modules
-* Annatomy of a Module:: Basic module layout and technology
+* Anatomy of a Module:: Basic module layout and technology
* Using ellcc:: How to use the module compiler
* Defining Functions:: Creating new Lisp primitives
* Defining Variables:: Creating new Lisp variables
--- The Detailed Node Listing ---
-Annatomy of a Module
+Anatomy of a Module
* Required Header File:: Always include <emodules.h>
* Required Functions:: Functions you must always provide
* Required Variables:: Variables whose values you must provide
-* Loading other Modules:: How to load dependant modules
+* Loading other Modules:: How to load dependent modules
Using @code{ellcc}
@end ifinfo
-@node Introduction, Annatomy of a Module, Top, Top
+@node Introduction, Anatomy of a Module, Top, Top
@chapter Introduction
- @emacs{} is a powerful, extensible editor. The traditional way of
-extending the functionality of @emacs{} is to use its built-in Lisp
+ @value{emacs} is a powerful, extensible editor. The traditional way of
+extending the functionality of @value{emacs} is to use its built-in Lisp
language (called Emacs Lisp, or Elisp for short). However, while Elisp
-is a full programming language and capable of extending @emacs{} in more
+is a full programming language and capable of extending @value{emacs} in more
ways than you can imagine, it does have its short-comings.
Firstly, Elisp is an interpreted language, and this has serious speed
implications. Like all other interpreted languages (like Java), Elisp
is often suitable only for certain types of application or extension.
-So although Elisp is a general purpose language, and very ligh level,
-there are times when it is desirable to descend to a lower level compiled
+So although Elisp is a general purpose language, and very high level,
+there are times when it is desirable to descend to a lower level compiled
language for speed purposes.
Secondly, Elisp (or Lisp in general) is not a very common language any
more, except for certain circles in the computer industry. C is a far
-more commonly known language, and because it is compiled, more suited to
+more commonly known language, and because it is compiled, more suited to
a wider range of applications, especially those that require low level
access to a system or need to be as quick as possible.
@cindex DLL
@cindex DSO
@cindex shared object
- This manual describes a new way of extending @emacs{}, by using dynamic
-loadable modules (also knows as dynamicaly loadable libraries (DLLs),
-dynamic shared objects (DSOs) or just simply shared objectcs), which can
-be written in C or C++ and loaded into @emacs{} at any time. I sometimes
+ This manual describes a new way of extending @value{emacs}, by using dynamic
+loadable modules (also known as dynamically loadable libraries (DLLs),
+dynamic shared objects (DSOs) or just simply shared objects), which can
+be written in C or C++ and loaded into @value{emacs} at any time. I sometimes
refer to this technology as @dfn{CEmacs}, which is short for @dfn{C
Extensible Emacs}.
- @emacs{} modules are configured into and installed with @emacs{} by
+ @value{emacs} modules are configured into and installed with @value{emacs} by
default on all systems that support loading of shared objects. From a
-users perspective, the internals of @emacs{} modules are irrelevant.
+users perspective, the internals of @value{emacs} modules are irrelevant.
All a user will ever need to know about shared objects is the name of
the shared object when they want to load a given module. From a
developers perspective though, a lot more is provided.
compile and link all objects that will make up the final shared object,
and accepts all common C compiler flags. @code{ellcc} also sets up the
correct environment for compiling modules by enabling any special
-compiler modes (such as PIC mode), setting the correct include paths for
-the location of @emacs{} internal header files etc. The program will also
+compiler modes (such as PIC mode), setting the correct include paths for
+the location of @value{emacs} internal header files etc. The program will also
invoke the linker correctly to created the final shared object which is
-loaded into @emacs{}.
+loaded into @value{emacs}.
@item
@cindex header files
- CEmacs also makes all of the relevant @emacs{} internal header files
-availible for module authors to use. This is often required to get data
+ CEmacs also makes all of the relevant @value{emacs} internal header files
+available for module authors to use. This is often required to get data
structure definitions and external variable declarations. The header
files installed include the module specific header file
@file{emodules.h}. Due to the nature of dynamic modules, most of the
-internals of @emacs{} are exposed.
-@xref{Top,,,internals,@emacs{} Internals Manual}, for a
-more complete discussion on how to extend and understand @emacs{}. All of
+internals of @value{emacs} are exposed.
+@xref{Top,,,internals,@value{emacs} Internals Manual}, for a
+more complete discussion on how to extend and understand @value{emacs}. All of
the rules for C modules are discussed there.
@item
@cindex samples
- Part of the @emacs{} distribution is a set of sample modules. These are
-not installed when @emacs{} is, but remain in the @emacs{} source tree.
+ Part of the @value{emacs} distribution is a set of sample modules. These are
+not installed when @value{emacs} is, but remain in the @value{emacs} source tree.
These modules live in the directory @file{modules}, which is a
-sub-directory of the main @emacs{} source code directory. Please look at
+sub-directory of the main @value{emacs} source code directory. Please look at
the samples carefully, and maybe even use them as a basis for making
your own modules. Most of the concepts required for writing extension
modules are covered in the samples.
@cindex documentation
@cindex help
Last, but not least is this manual. This can be viewed from within
-@emacs{}, and it can be printed out as well. It is the intention of this
+@value{emacs}, and it can be printed out as well. It is the intention of this
document that it will describe everything you need to know about
-extending @emacs{} in C. If you do not find this to be the case, please
+extending @value{emacs} in C. If you do not find this to be the case, please
contact the author(s).
@end itemize
The rest of this document will discuss the actual mechanics of
-@emacs{} modules and work through several of the samples. Please be
-sure that you have read the @emacs{} Internals Manual and understand
+@value{emacs} modules and work through several of the samples. Please be
+sure that you have read the @value{emacs} Internals Manual and understand
everything in it. The concepts there apply to all modules. This
document may have some overlap, but it is the internals manual which
should be considered the final authority. It will also help a great
-deal to look at the actual @emacs{} source code to see how things are
+deal to look at the actual @value{emacs} source code to see how things are
done.
-@node Annatomy of a Module, Using ellcc, Introduction, Top
-@chapter Annatomy of a Module
-@cindex annatomy
+@node Anatomy of a Module, Using ellcc, Introduction, Top
+@chapter Anatomy of a Module
+@cindex anatomy
@cindex module skeleton
@cindex skeleton, module
@cindex module format
@cindex format, module
- Each dynamically loadable @emacs{} extension (hereafter refered to as a
-module) has a certain compulsory format, and must contain several
-pieces of information and several mandatory functions. This chapter
+ Each dynamically loadable @value{emacs} extension (hereafter referred to as a
+module) has a certain compulsory format, and must contain several
+pieces of information and several mandatory functions. This chapter
describes the basic layout of a module, and provides a very simple
sample. The source for this sample can be found in the file
-@file{modules/simple/sample.c} in the main @emacs{} source code tree.
+@file{modules/simple/sample.c} in the main @value{emacs} source code tree.
@menu
* Required Header File:: Always include <emodules.h>
* Required Functions:: Functions you must always provide
* Required Variables:: Variables whose values you must provide
-* Loading other Modules:: How to load dependant modules
+* Loading other Modules:: How to load dependent modules
@end menu
-@node Required Header File, Required Functions, Annatomy of a Module, Annatomy of a Module
+@node Required Header File, Required Functions, Anatomy of a Module, Anatomy of a Module
@section Required Header File
@cindex required header
@cindex include files
@cindex emodules.h
@cindex config.h
Every module must include the file @file{<emodules.h>}. This
-will include several other @emacs{} internal header files, and will set up
+will include several other @value{emacs} internal header files, and will set up
certain vital macros. One of the most important files included by
@file{emodules.h} is the generated @file{config.h} file, which contains
all of the required system abstraction macros and definitions. Most
constants defined in @file{config.h}. Please read that file to
familiarize yourself with the macros defined there.
- Depending on exactly what your module will be doing, you will probably
-need to include one or more of the @emacs{} internal header files. When
-you @code{#include <emodules.h>}, you will get a few of the most important
-@emacs{} header files included automatically for you. The files included
+ Depending on exactly what your module will be doing, you will probably
+need to include one or more of the @value{emacs} internal header files. When
+you @code{#include <emodules.h>}, you will get a few of the most important
+@value{emacs} header files included automatically for you. The files included
are:
@table @file
@item lisp.h
-This file contains most of the macros required for declaring Lisp object
+This file contains most of the macros required for declaring Lisp object
types, macros for accessing Lisp objects, and global variable
declarations.
@item sysdep.h
-All system dependant declarations and abstraction macros live here. You
+All system dependent declarations and abstraction macros live here. You
should never call low level system functions directly. Rather, you
should use the abstraction macros provided in this header file.
@item window.h
This header file defines the window structures and Lisp types, and
-provides functions and macros for manipulating multiple @emacs{} windows.
+provides functions and macros for manipulating multiple @value{emacs} windows.
@item buffer.h
All macros and function declarations for manipulating internal and user
@item frame.h
Provides the required structure, macro and function definitions for
-manipulating @emacs{} frames.
+manipulating @value{emacs} frames.
@end table
-@node Required Functions, Required Variables, Required Header File, Annatomy of a Module
+@node Required Functions, Required Variables, Required Header File, Anatomy of a Module
@section Required Functions
@cindex initialization
@cindex functions, required
@cindex required functions
Every module requires several initialization functions. It is the
-responsibility of these functions to load in any dependant modules, and to
-declare all variables and functions which are to be made visibile to the
-@emacs{} Lisp reader. Each of these functions performs a very specific
-task, and they are executed in the correct order by @emacs{}. All of
+responsibility of these functions to load in any dependent modules, and to
+declare all variables and functions which are to be made visible to the
+@value{emacs} Lisp reader. Each of these functions performs a very specific
+task, and they are executed in the correct order by @value{emacs}. All of
these functions are @code{void} functions which take no arguments.
Here, briefly, are the required module functions. Note that the actual
function names do not end with the string @code{_module}, but rather
@table @code
@item syms_of_module
@findex syms_of_module
-This required function is responsible for introducing to the Lisp reader
+This required function is responsible for introducing to the Lisp reader
all functions that you have defined in your module using
@code{DEFUN()}. Note that @emph{only} functions are declared here, using
the @code{DEFSUBR()} macro. No variables are declared.
@code{DEFVAR_LISP()}, @code{DEFVAR_BOOL()} etc, and its purpose is to
declare and initialize all and any variables that your module defines.
They syntax for declaring variables is identical to the syntax used for
-all internal @emacs{} source code.
+all internal @value{emacs} source code. If the module is intended to be
+usable statically linked into XEmacs, the actions of this function are
+severely restricted. @xref{General Coding Rules,,,internals,
+@value{emacs} Internals Manual}. Also see the comments in
+@file{src/emacs.c} (@code{main_1}). Modules which perform
+initializations not permitted by these rules will probably work, but
+dual-use (dynamic loading and static linking) modules will require very
+careful, and possibly fragile, coding.
@item modules_of_module
@findex modules_of_module
This optional function should be used to load in any modules which your
-module depends on. The @emacs{} module loading code makes sure that the
+module depends on. The @value{emacs} module loading code makes sure that the
same module is not loaded twice, so several modules can safely call the
module load function for the same module. Only one copy of each module
(at a given version) will ever be loaded.
functions and variables declared in your module.
@end table
-@node Required Variables, Loading other Modules, Required Functions, Annatomy of a Module
+@node Required Variables, Loading other Modules, Required Functions, Anatomy of a Module
@section Required Variables
@cindex initialization
@cindex variables, required
Not only does a module need to declare the initialization functions
mentioned above, it is also required to provide certain variables which
-the module loading code searches for in order to determine the viability
+the module loading code searches for in order to determine the viability
of a module. You are @emph{not} required to provide these variables in
your source files. They are automatically set up in the module
initialization file by the @code{ellcc} compiler. These variables are
@table @code
@item emodules_compiler
This is a variable of type @code{long}, and is used to indicate the
-version of the @emacs{} loading technology that was used to produce the
+version of the @value{emacs} loading technology that was used to produce the
module being loaded. This version number is completely unrelated to
-the @emacs{} version number, as a given module may quite well work
-regardless of the version of @emacs{} that was installed at the time the
+the @value{emacs} version number, as a given module may quite well work
+regardless of the version of @value{emacs} that was installed at the time the
module was created.
-The @emacs{} modules version is used to differentiate between major
-changes in the module loading technology, not versions of @emacs{}.
+The @value{emacs} modules version is used to differentiate between major
+changes in the module loading technology, not versions of @value{emacs}.
@item emodules_name
This is a short (typically 10 characters or less) name for the module,
and it is used as a suffix for all of the required functions. This is
-also the name by which the module is recognised when loading dependant
+also the name by which the module is recognized when loading dependent
modules. The name does not necessarily have to be the same as the
physical file name, although keeping the two names in sync is a pretty
-good idea. The name must not be empty, and it must be a valid part of a
-C function name. The value of this variable is appended to the function
+good idea. The name must not be empty, and it must be a valid part of a
+C function name. The value of this variable is appended to the function
names @code{syms_of_}, @code{vars_of_}, @code{modules_of_} and
@code{docs_of_} to form the actual function names that the module
loading code looks for when loading a module.
@code{--mod-title} argument to @code{ellcc}.
@end table
-@node Loading other Modules, , Required Variables, Annatomy of a Module
+@node Loading other Modules, , Required Variables, Anatomy of a Module
@section Loading other Modules
-@cindex dependancies
+@cindex dependencies
@findex modules_of_module
@findex emodules_load
@code{modules_of_module} to load in any modules which the current module
depends on. If the module is stand-alone, and does not depend on other
modules, then this function can be left empty or even undeclared.
-However, if it does have dependnacies, it must call
+However, if it does have dependencies, it must call
@code{emodules_load}:
-@example @code
+@example
@cartouche
-int emodules_load (CONST char *module,
- CONST char *modname,
- CONST char *modver)
+int emodules_load (const char *module,
+ const char *modname,
+ const char *modver)
@end cartouche
@end example
-The first argument @var{module} is the name of the actual shared object
+The first argument @var{module} is the name of the actual shared object
or DLL. You can omit the @file{.so}, @file{.ell} or @file{.dll}
extension of you wish. If you do not specify an absolute path name,
then the same rules as apply to loading Lisp modules are applied when
searching for the module. If the module cannot be found in any of the
standard places, and an absolute path name was not specified,
-@code{emodules_load} will signal an error and loading of the module
+@code{emodules_load} will signal an error and loading of the module
will stop.
The second argument (@var{modname}) is the module name to load, and
must match the contents of the variable @var{emodule_name} in the
-module to be loaded. A mis-match will cause the module load to fail. If
+module to be loaded. A mis-match will cause the module load to fail. If
this parameter is @code{NULL} or empty, then no checks are performed
against the target module's @var{emodule_name} variable.
or empty, and the match fails, then the load of the module will fail.
@code{emodules_load} can be called recursively. If, at any point
-during the loading of modules a failure is encountered, then all modules
+during the loading of modules a failure is encountered, then all modules
that were loaded since the top level call to @code{emodules_load}
will be unloaded. This means that if any child modules fail to load,
then their parents will also fail to load. This does not include
previous successful calls to @code{emodules_load} at the top level.
-@node Using ellcc, Defining Functions, Annatomy of a Module, Top
+@node Using ellcc, Defining Functions, Anatomy of a Module, Top
@chapter Using @code{ellcc}
@cindex @code{ellcc}
@cindex module compiler
Before discussing the anatomy of a module in greater detail, you should
be aware of the steps required in order to correctly compile and link a
-module for use within @emacs{}. There is little difference between
+module for use within @value{emacs}. There is little difference between
compiling normal C code and compiling a module. In fact, all that
changes is the command used to compile the module, and a few extra
arguments to the compiler.
-@emacs{} now ships with a new user utility, called @code{ellcc}. This
+@value{emacs} now ships with a new user utility, called @code{ellcc}. This
is the @dfn{Emacs Loadable Library C Compiler}. This is a wrapper
program that will invoke the real C compiler with the correct arguments
to compile and link your module. With the exception of a few command
an Emacs module rather than a static C object.
@code{ellcc} has three distinct modes of operation. It can be run in
-compile, link or initialization mode. These modes are discussed in more
+compile, link or initialization mode. These modes are discussed in more
detail below. If you want @code{ellcc} to show the commands it is
executing, you can specify the option @code{--mode=verbose} to
@code{ellcc}. Specifying this option twice will enable certain extra
@cindex compiling
By default, @code{ellcc} is in @dfn{compile} mode. This means that it
-assumes that all of the command line arguments are C compiler arguments,
+assumes that all of the command line arguments are C compiler arguments,
and that you want to compile the specified source file or files. You
can force compile mode by specifying the @code{--mode=compile} argument
to @code{ellcc}.
In this mode, @code{ellcc} is simply a front-end to the same C compiler
-that was used to create the @emacs{} binary itself. All @code{ellcc}
+that was used to create the @value{emacs} binary itself. All @code{ellcc}
does in this mode is insert a few extra command line arguments before
the arguments you specify to @code{ellcc} itself. @code{ellcc} will
then invoke the C compiler to compile your module, and will return the
same exit codes and messages that your C compiler does.
By far the easiest way to compile modules is to construct a
-@file{Makefile} as you would for a normal program, and simply insert, at
+@file{Makefile} as you would for a normal program, and simply insert, at
some appropriate place something similar to:
-@example @code
+@example
@cartouche
CC=ellcc --mode=compile
@cindex initialization
@cindex documentation
-@emacs{} uses a rather bizarre way of documenting variables and
+@value{emacs} uses a rather bizarre way of documenting variables and
functions. Rather than have the documentation for compiled functions
and variables passed as static strings in the source code, the
documentation is included as a C comment. A special program, called
@file{make-docfile}, is used to scan the source code files and extract
-the documentation from these comments, producing the @emacs{} @file{DOC}
+the documentation from these comments, producing the @value{emacs} @file{DOC}
file, which the internal help engine scans when the documentation for a
function or variable is requested.
Due to the internal construction of Lisp objects, subrs and other such
things, adding documentation for a compiled function or variable in a
-compiled module, at any time after @emacs{} has been @dfn{dumped} is
-somewhat problematic. Fortunately, as a module writer you are insulated
+compiled module, at any time after @value{emacs} has been @dfn{dumped} is
+somewhat problematic. Fortunately, as a module writer you are insulated
from the difficulties thanks to your friend @code{ellcc} and some
internal trickery in the module loading code. This is all done using
the @dfn{initialization} mode of @code{ellcc}.
The result of running @code{ellcc} in initialization mode is a C source
file which you compile with (you guessed it) @code{ellcc} in compile
mode. Initialization mode is where you set the module name, version,
-title and gather together all of the documentaion strings for the
-functions and vairables in your module. There are several options that
+title and gather together all of the documentation strings for the
+functions and variables in your module. There are several options that
you are required to pass @code{ellcc} in initialization mode, the first
of which is the mode switch itself, @code{--mode=init}.
screen.
Following all of these parameters, you need to provide the list of all
-source code modules that make up your module. These are the files which
-are scanned by @file{make-docfile}, and provide the information required
+source code modules that make up your module. These are the files which
+are scanned by @file{make-docfile}, and provide the information required
to populate the @code{docs_of_module} function. Below is a sample
@file{Makefile} fragment which indicates how all of this is used.
-@example @code
+@example
@cartouche
CC=ellcc --mode=compile
LD=ellcc --mode=link
The above @file{Makefile} is, in fact, complete, and would compile the
sample module, and optionally install it. The @code{--mod-location}
argument to @code{ellcc} will produce, on the standard output, the base
-location of the @emacs{} module directory. Each sub-directory of that
+location of the @value{emacs} module directory. Each sub-directory of that
directory is automatically searched for for modules when they are loaded
with @code{load-module}. An alternative location would be
@file{/usr/local/lib/xemacs/site-modules}. That path can change
-depending on the options the person who compiled @emacs{} chose, so you
+depending on the options the person who compiled @value{emacs} chose, so you
can always determine the correct site location using the
@code{--mod-site-location} option. This directory is treated the same
way as the main module directory. Each sub-directory within it is
searched for a given module when the user attempts to load it. The
valid extensions that the loader attempts to use are @file{.so},
@file{.ell} and @file{.dll}. You can use any of these extensions,
-although @file{.ell} is the prefered extension.
+although @file{.ell} is the preferred extension.
@node Link Mode, Other ellcc options, Initialization Mode, Using ellcc
@section Link Mode
@cindex linking
Once all of your source code files have been compiled (including the
-generated init file) you need to link them all together to created the
+generated init file) you need to link them all together to create the
loadable module. To do this, you invoke @code{ellcc} in link mode, by
-pasing the @code{--mode-link} command. You need to specify the final
-output file using the @code{--mod-output=NAME} command, but other than
+passing the @code{--mode=link} option. You need to specify the final
+output file using the @code{--mod-output=NAME} option, but other than
that all other arguments are passed on directly to the system compiler
or linker, along with any other required arguments to create the
loadable module.
The module has complete access to all symbols that were present in the
-dumped @emacs{}, so you do not need to link against libraries that were
+dumped @value{emacs}, so you do not need to link against libraries that were
linked in with the main executable. If your library uses some other
extra libraries, you will need to link with those. There is nothing
particularly complicated about link mode. All you need to do is make
Aside from the three main @code{ellcc} modes described above,
@code{ellcc} can accept several other options. These are typically used
-in a @file{Makefile} to determine installation paths. @code{ellcc} also
+in a @file{Makefile} to determine installation paths. @code{ellcc} also
allows you to over-ride several of its built-in compiler and linker
options using environment variables. Here is the complete list of
options that @code{ellcc} accepts.
@item --mode=init
Used to create the documentation function and to initialize other
-required variables. Produces a C source file that must be compiled with
+required variables. Produces a C source file that must be compiled with
@code{ellcc} in compile mode before linking the final module.
@item --mode=verbose
Enables verbose mode. This will show you the commands that are being
-executed, as well as the version number of @code{ellcc}. If you specify
+executed, as well as the version number of @code{ellcc}. If you specify
this option twice, then some extra debugging information is displayed.
@item --mod-name=NAME
-Sets the short internaml module @var{NAME} to the string specified,
+Sets the short internal module @var{NAME} to the string specified,
which must consist only of valid C identifiers. Required during
initialization mode.
final loadable module to @var{FILENAME}.
@item --mod-location
-This will print the name of the standard module installation path on the
+This will print the name of the standard module installation path on the
standard output and immediately exit @code{ellcc}. Use this option to
determine the directory prefix of where you should install your modules.
This will print the name of the site specific module location and exit.
@item --mod-archdir
-Prints the name of the root of the architecture-dependant directory that
-@emacs{} searches for architecture-dependant files.
+Prints the name of the root of the architecture-dependent directory that
+@value{emacs} searches for architecture-dependent files.
@item --mod-config
-Prints the name of the configuration for which @emacs{} and @code{ellcc}
+Prints the name of the configuration for which @value{emacs} and @code{ellcc}
were compiled.
@end table
@cindex environment variables
During its normal operation, @code{ellcc} uses the compiler and linker
-flags that were determined at the time @emacs{} was configured. In
-certain rare circumstances you may wish to over-ride the flags passed to
+flags that were determined at the time @value{emacs} was configured. In
+certain rare circumstances you may wish to over-ride the flags passed to
the compiler or linker, and you can do so using environment variables.
-The table below lists all of the environment variables that @code{ellcc}
-recognises.
+The table below lists all of the environment variables that @code{ellcc}
+recognizes.
@table @code
@item ELLCC
@cindex @code{ELLMAKEDOC}
Sets the name of the @file{make-docfile} program to use. Usually
@code{ellcc} will use the version that was compiled and installed with
-@emacs{}, but this option allows you to specify an alternative path.
-Used during the compile phase of @emacs{} itself.
+@value{emacs}, but this option allows you to specify an alternative path.
+Used during the compile phase of @value{emacs} itself.
@end table
@node Defining Functions, Defining Variables, Using ellcc, Top
One of the main reasons you would ever write a module is to
provide one or more @dfn{functions} for the user or the editor to use.
-The term
+The term
@dfn{function} is a bit overloaded here, as it refers to both a C
function and the way it appears to Lisp, which is a @dfn{subroutine}, or
simply a @dfn{subr}. A Lisp subr is also known as a Lisp primitive, but
that term applies less to dynamic modules. @xref{Writing Lisp
-Primitives,,,internals,@emacs{} Internals Manual}, for details on how to
+Primitives,,,internals,@value{emacs} Internals Manual}, for details on how to
declare functions. You should familiarize yourself with the
-instructions there. The format of the function declaration is identical
+instructions there. The format of the function declaration is identical
in modules.
- Normal Lisp primitives document the functions they defining by including
+ Normal Lisp primitives document the functions they defining by including
the documentation as a C comment. During the build process, a program
called @file{make-docfile} is run, which will extract all of these
comments, build up a single large documentation file, and will store
-pointers to the start of each documentation entry in the dumped @emacs{}.
+pointers to the start of each documentation entry in the dumped @value{emacs}.
This, of course, will not work for dynamic modules, as they are loaded
-long after @emacs{} has been dumped. For this reason, we require a
+long after @value{emacs} has been dumped. For this reason, we require a
special means for adding documentation for new subrs. This is what the
macro @code{CDOCSUBR} is used for, and this is used extensively during
@code{ellcc} initialization mode.
- When using @code{DEFUN} in normal @emacs{} C code, the sixth
+ When using @code{DEFUN} in normal @value{emacs} C code, the sixth
``parameter'' is a C comment which documents the function. For a
dynamic module, we of course need to convert the C comment to a usable
-string, and we need to set the documentation pointer of the subr to this
+string, and we need to set the documentation pointer of the subr to this
string. As a module programmer, you don't actually need to do any work
for this to happen. It is all taken care of in the
@code{docs_of_module} function created by @code{ellcc}.
@cindex functions, Lisp
@cindex functions, defining
- Although the full syntax of a function declaration is discussed in the
-@emacs{} internals manual in greater depth, what follows is a brief
+ Although the full syntax of a function declaration is discussed in the
+@value{emacs} internals manual in greater depth, what follows is a brief
description of how to define and implement a new Lisp primitive in a
module. This is done using the @code{DEFUN} macro. Here is a small
example:
-@example @code
+@example
@cartouche
DEFUN ("my-function", Fmy_function, 1, 1, "FFile name: ", /*
Sample Emacs primitive function.
-The specified FILE is frobricated before it is fnozzled.
+The specified FILE is frobnicated before it is fnozzled.
*/
(file))
@{
@end example
The first argument is the name of the function as it will appear to the
-Lisp reader. This must be provided as a string. The second argument is
+Lisp reader. This must be provided as a string. The second argument is
the name of the actual C function that will be created. This is
-typically the Lisp function name with a preceding capital @code{F}, with
+typically the Lisp function name with a preceding capital @code{F}, with
hyphens converted to underscores. This must be a valid C function
name. Next come the minimum and maximum number of arguments,
respectively. This is used to ensure that the correct number of
arguments are passed to the function. Next is the @code{interactive}
definition. If this function is meant to be run by a user
interactively, then you need to specify the argument types and prompts
-in this string. Please consult the @emacs{} Lisp manual for more
+in this string. Please consult the @value{emacs} Lisp manual for more
details. Next comes a C comment that is the documentation for this
function. This comment @strong{must} exist. Last comes the list of
function argument names, if any.
@cindex functions, declaring
Simply writing the code for a function is not enough to make it
-availible to the Lisp reader. You have to, during module
+available to the Lisp reader. You have to, during module
initialization, let the Lisp reader know about the new function. This
is done by calling @code{DEFSUBR} with the name of the function. This
is the sole purpose of the initialization function
@code{DEFUN}. Using the example function above, you would insert the
following code in the @code{syms_of_module} function:
-@example @code
+@example
@cartouche
DEFSUBR(Fmy_function);
@end cartouche
@end example
-This call will instruct @emacs{} to make the function visible to the Lisp
+This call will instruct @value{emacs} to make the function visible to the Lisp
reader and will prepare for the insertion of the documentation into
the right place. Once this is done, the user can call the Lisp
function @code{my-function}, if it was defined as an interactive
Thats all there is to defining and announcing new functions. The rules
for what goes inside the functions, and how to write good modules, is
-beyond the scope of this document. Please consult the @emacs{}
+beyond the scope of this document. Please consult the @value{emacs}
internals manual for more details.
@node Defining Variables, Index, Defining Functions, Top
Rarely will you write a module that only contains functions. It is
common to also provide variables which can be used to control the
-behaviour of the function, or store the results of the function being
+behavior of the function, or store the results of the function being
executed. The actual C variable types are the same for modules
-and internal @emacs{} primitives, and the declaration of the variables
+and internal @value{emacs} primitives, and the declaration of the variables
is identical.
- @xref{Adding Global Lisp Variables,,,internals,XEmacs Internals Manual},
+ @xref{Adding Global Lisp Variables,,,internals,XEmacs Internals Manual},
for more information on variables and naming conventions.
Once your variables are defined, you need to initialize them and make
the Lisp reader aware of them. This is done in the
-@code{vars_of_module} initialization function using special @emacs{}
-macros such as @code{DEFVAR_LISP}, @code{DEFVAR_BOOL}, @code{DEFVAR_INT}
-etc. The best way to see how to use these macros is to look at existing
+@code{vars_of_module} initialization function using special @value{emacs}
+macros such as @code{DEFVAR_LISP}, @code{DEFVAR_BOOL}, @code{DEFVAR_INT}
+etc. The best way to see how to use these macros is to look at existing
source code, or read the internals manual.
- One @emph{very} important difference between @emacs{} variables and
+ One @emph{very} important difference between @value{emacs} variables and
module variables is how you use pure space. Simply put, you
-@strong{never} use pure space in @emacs{} modules. The pure space
-storage is of a limited size, and is initialized propperly during the
-dumping of @emacs{}. Because variables are being added dynamically to
-an already running @emacs{} when you load a module, you cannot use pure
+@strong{never} use pure space in @value{emacs} modules. The pure space
+storage is of a limited size, and is initialized properly during the
+dumping of @value{emacs}. Because variables are being added dynamically to
+an already running @value{emacs} when you load a module, you cannot use pure
space. Be warned: @strong{do not use pure space in modules. Repeat, do
not use pure space in modules.} Once again, to remove all doubts:
@strong{DO NOT USE PURE SPACE IN MODULES!!!}
Below is a small example which declares and initializes two
variables. You will note that this code takes into account the fact
-that this module may very well be compiled into @emacs{} itself. This
+that this module may very well be compiled into @value{emacs} itself. This
is a prudent thing to do.
-@example @code
+@example
@cartouche
Lisp_Object Vsample_string;
int sample_boolean;