return FRAME_MINIBUF_WINDOW (decode_frame_or_selected (con_dev_or_frame));
}
-DEFUN ("window-minibuffer-p", Fwindow_minibuffer_p, 1, 1, 0, /*
+DEFUN ("window-minibuffer-p", Fwindow_minibuffer_p, 0, 1, 0, /*
Return non-nil if WINDOW is a minibuffer window.
*/
(window))
return make_int (decode_window (window)->hscroll);
}
-#ifdef MODELINE_IS_SCROLLABLE
DEFUN ("modeline-hscroll", Fmodeline_hscroll, 0, 1, 0, /*
-Return the number of columns by which WINDOW's modeline is scrolled from
-left margin. If the window has no modeline, return nil.
+Return the horizontal scrolling ammount of WINDOW's modeline.
+If the window has no modeline, return nil.
*/
(window))
{
struct window *w = decode_window (window);
- return (WINDOW_HAS_MODELINE_P (w)) ? make_int (w->modeline_hscroll) : Qnil;
+ return (WINDOW_HAS_MODELINE_P (w)) ? make_int ((int) w->modeline_hscroll) :
+ Qnil;
}
DEFUN ("set-modeline-hscroll", Fset_modeline_hscroll, 2, 2, 0, /*
-Set number of columns WINDOW's modeline is scrolled from left margin to NCOL.
-NCOL should be zero or positive. If NCOL is negative, it will be forced to 0.
-If the window has no modeline, do nothing and return nil.
+Set the horizontal scrolling ammount of WINDOW's modeline to NCOL.
+If NCOL is negative, it will silently be forced to 0.
+If the window has no modeline, return nil. Otherwise, return the actual
+value that was set.
*/
(window, ncol))
{
if (WINDOW_HAS_MODELINE_P (w))
{
- int ncols;
+ Charcount ncols;
+
CHECK_INT (ncol);
- ncols = XINT (ncol);
- if (ncols < 0) ncols = 0;
- if (w->modeline_hscroll != ncols)
- MARK_MODELINE_CHANGED;
- w->modeline_hscroll = ncols;
- return ncol;
+ ncols = (XINT (ncol) <= 0) ? 0 : (Charcount) XINT (ncol);
+ if (ncols != w->modeline_hscroll)
+ {
+ MARK_MODELINE_CHANGED;
+ w->modeline_hscroll = ncols;
+ }
+ return make_int ((int) ncols);
}
+
return Qnil;
}
-#endif /* MODELINE_IS_SCROLLABLE */
DEFUN ("set-window-hscroll", Fset_window_hscroll, 2, 2, 0, /*
Set number of columns WINDOW is scrolled from left margin to NCOL.
fheight = XINT (Vwindow_pixel_scroll_increment);
else if (!NILP (Vwindow_pixel_scroll_increment));
default_face_height_and_width (window, &fheight, &fwidth);
-
+
if (Dynarr_length (dla) >= 1)
modeline = Dynarr_atp (dla, 0)->modeline;
dl = Dynarr_atp (dla, modeline);
-
+
if (value > 0)
{
/* Go for partial display line scrolling. This just means bumping
{
int vtarget;
Bufpos startp, old_start;
-
+
if (WINDOW_TEXT_TOP_CLIP (w))
{
WINDOW_TEXT_TOP_CLIP (w) = 0;
old_start = marker_position (w->start[CURRENT_DISP]);
startp = vmotion (w, old_start, value, &vtarget);
-
+
if (vtarget < value &&
(w->window_end_pos[CURRENT_DISP] == -1
|| (BUF_Z (b) - w->window_end_pos[CURRENT_DISP] > BUF_ZV (b))))
w->force_start = 1;
w->start_at_line_beg = beginning_of_line_p (b, startp);
MARK_WINDOWS_CHANGED (w);
-
+
if (!point_would_be_visible (w, startp, XINT (point)))
{
if (selected)
{
int vtarget;
Bufpos startp, old_start;
-
+
if (WINDOW_TEXT_TOP_CLIP (w))
{
WINDOW_TEXT_TOP_CLIP (w) = 0;
MARK_WINDOWS_CHANGED (w);
}
-
+
old_start = marker_position (w->start[CURRENT_DISP]);
startp = vmotion (w, old_start, value, &vtarget);
-
+
if (vtarget > value
&& marker_position (w->start[CURRENT_DISP]) == BUF_BEGV (b))
{
w->force_start = 1;
w->start_at_line_beg = beginning_of_line_p (b, startp);
MARK_WINDOWS_CHANGED (w);
-
+
if (!point_would_be_visible (w, startp, XINT (point)))
{
Bufpos new_point;
-
+
if (MINI_WINDOW_P (w))
new_point = startp;
else
new_point = start_of_last_line (w, startp);
-
+
if (selected)
BUF_SET_PT (b, new_point);
else
int pixel_width;
int pixel_height;
int hscroll;
- int modeline_hscroll;
+ Charcount modeline_hscroll;
int parent_index; /* index into saved_windows */
int prev_index; /* index into saved_windows */
char start_at_line_beg; /* boolean */
#define XWINDOW_CONFIGURATION(x) XRECORD (x, window_configuration, struct window_config)
#define XSETWINDOW_CONFIGURATION(x, p) XSETRECORD (x, p, window_configuration)
#define WINDOW_CONFIGURATIONP(x) RECORDP (x, window_configuration)
-#define GC_WINDOW_CONFIGURATIONP(x) GC_RECORDP (x, window_configuration)
#define CHECK_WINDOW_CONFIGURATION(x) CHECK_RECORD (x, window_configuration)
static Lisp_Object
int previous_pixel_width;
int previous_minibuf_height, previous_minibuf_top,previous_minibuf_width;
int real_font_height;
- int converted_minibuf_height,target_minibuf_height;
+ int converted_minibuf_height,target_minibuf_height;
int specpdl_count = specpdl_depth ();
GCPRO1 (configuration);
#if 0
/* JV: This is bogus,
First of all, the units are inconsistent. The frame sizes are measured
- in characters but the window sizes are stored in pixels. So if a
+ in characters but the window sizes are stored in pixels. So if a
font size change happened between saving and restoring, the
frame "sizes" maybe equal but the windows still should be
resized. This is tickled alot by the new "character size
|| config->frame_width != FRAME_WIDTH (f))
change_frame_size (f, config->frame_height, config->frame_width, 0);
#endif
-
+
previous_pixel_top = XWINDOW (FRAME_ROOT_WINDOW (f))->pixel_top;
previous_pixel_height = XWINDOW (FRAME_ROOT_WINDOW (f))->pixel_height;
previous_pixel_left = XWINDOW (FRAME_ROOT_WINDOW (f))->pixel_left;
default_face_height_and_width (frame, &real_font_height, 0);
assert(real_font_height > 0);
-
+
if (FRAME_HAS_MINIBUF_P (f) && ! FRAME_MINIBUF_ONLY_P (f))
{
previous_minibuf_height
else
{
previous_minibuf_height = 0;
+ previous_minibuf_top = 0;
previous_minibuf_width = 0;
}
converted_minibuf_height =
(previous_minibuf_height % real_font_height) == 0 ?
- (previous_minibuf_height / real_font_height ) : /* lines */
previous_minibuf_height; /* pixels */
-
+
/* Temporarily avoid any problems with windows that are smaller
than they are supposed to be. */
window_min_height = 1;
#### Now we get more cases correct then ever before, but
are we treating all? For instance what if the frames minibuf window
- is no longer the same one?
+ is no longer the same one?
*/
target_minibuf_height = previous_minibuf_height;
if (converted_minibuf_height &&
set_window_pixwidth (FRAME_MINIBUF_WINDOW (f),
previous_minibuf_width, 0);
}
-
+
/* This is a better way to deal with frame resizing, etc.
What we _actually_ want is for the old (just restored)
root window to fit
/* Note that this function also updates the subwindow
"pixel_left"s */
set_window_pixwidth (FRAME_ROOT_WINDOW (f), previous_pixel_width, 0);
-
+
/* If restoring in the current frame make the window current,
otherwise just update the frame selected_window slot to be
the restored current_window. */
/* save the minibuffer height using the heuristics from
change_frame_size_1 */
-
+
XSETFRAME (frame, f); /* frame could have been nil ! */
default_face_height_and_width (frame, &real_font_height, 0);
assert(real_font_height > 0);
-
+
if (FRAME_HAS_MINIBUF_P (f) && ! FRAME_MINIBUF_ONLY_P (f))
minibuf_height = XWINDOW(FRAME_MINIBUF_WINDOW(f))->pixel_height;
else
if (NILP (pos))
pos = Fwindow_point (window);
-
+
CHECK_INT (pos);
point = XINT (pos);
DEFSUBR (Fwindow_displayed_text_pixel_height);
DEFSUBR (Fwindow_text_area_pixel_width);
DEFSUBR (Fwindow_hscroll);
-#ifdef MODELINE_IS_SCROLLABLE
+ DEFSUBR (Fset_window_hscroll);
DEFSUBR (Fmodeline_hscroll);
DEFSUBR (Fset_modeline_hscroll);
-#endif /* MODELINE_IS_SCROLLABLE */
#if 0 /* bogus FSF crock */
DEFSUBR (Fwindow_redisplay_end_trigger);
DEFSUBR (Fset_window_redisplay_end_trigger);
#endif
- DEFSUBR (Fset_window_hscroll);
DEFSUBR (Fwindow_pixel_edges);
DEFSUBR (Fwindow_text_area_pixel_edges);
DEFSUBR (Fwindow_point);
Fadd_spec_to_specifier (Vmodeline_shadow_thickness, make_int (2),
Qnil, Qnil, Qnil);
set_specifier_caching (Vmodeline_shadow_thickness,
- slot_offset (struct window,
- modeline_shadow_thickness),
+ offsetof (struct window, modeline_shadow_thickness),
modeline_shadow_thickness_changed,
0, 0);
set_specifier_fallback (Vhas_modeline_p,
list1 (Fcons (Qnil, Qt)));
set_specifier_caching (Vhas_modeline_p,
- slot_offset (struct window,
- has_modeline_p),
+ offsetof (struct window, has_modeline_p),
/* #### It's strange that we need a special
flag to indicate that the shadow-thickness
has changed, but not one to indicate that
set_specifier_fallback (Vvertical_divider_always_visible_p,
list1 (Fcons (Qnil, Qt)));
set_specifier_caching (Vvertical_divider_always_visible_p,
- slot_offset (struct window,
- vertical_divider_always_visible_p),
+ offsetof (struct window,
+ vertical_divider_always_visible_p),
vertical_divider_changed_in_window,
0, 0);
Fadd_spec_to_specifier (Vvertical_divider_shadow_thickness, make_int (2),
Qnil, Qnil, Qnil);
set_specifier_caching (Vvertical_divider_shadow_thickness,
- slot_offset (struct window,
- vertical_divider_shadow_thickness),
+ offsetof (struct window,
+ vertical_divider_shadow_thickness),
vertical_divider_changed_in_window,
0, 0);
DEFVAR_SPECIFIER ("vertical-divider-line-width", &Vvertical_divider_line_width /*
set_specifier_fallback (Vvertical_divider_line_width, fb);
}
set_specifier_caching (Vvertical_divider_line_width,
- slot_offset (struct window,
- vertical_divider_line_width),
+ offsetof (struct window,
+ vertical_divider_line_width),
vertical_divider_changed_in_window,
0, 0);
set_specifier_fallback (Vvertical_divider_spacing, fb);
}
set_specifier_caching (Vvertical_divider_spacing,
- slot_offset (struct window,
- vertical_divider_spacing),
+ offsetof (struct window, vertical_divider_spacing),
vertical_divider_changed_in_window,
0, 0);
}