\input texinfo @c -*-texinfo-*-
@setfilename gnus
-@settitle Semi-gnus 6.7.1 Manual
+@settitle Semi-gnus 6.7.9 Manual
@synindex fn cp
@synindex vr cp
@synindex pg cp
@tex
@titlepage
-@title Semi-gnus 6.7.1 Manual
+@title Semi-gnus 6.7.9 Manual
@author by Lars Magne Ingebrigtsen
@page
API. So Semi-gnus does not discriminate various language communities.
Oh, if you are a Klingon, please wait Unicode Next Generation.
-This manual corresponds to Semi-gnus 6.7.1.
+This manual corresponds to Semi-gnus 6.7.9.
@end ifinfo
@vindex gnus-group-mode-line-format
The mode line can be changed by setting
-@code{gnus-group-mode-line-format} (@pxref{Formatting Variables}). It
+@code{gnus-group-mode-line-format} (@pxref{Mode Line Formatting}). It
doesn't understand that many format specifiers:
@table @samp
methods.
@vindex gnus-activate-foreign-newsgroups
-If @code{gnus-activate-foreign-newsgroups} is a positive number, gnus
-will check all foreign groups with this level or lower at startup. This
-might take quite a while, especially if you subscribe to lots of groups
-from different @sc{nntp} servers.
+If @code{gnus-activate-foreign-newsgroups} is a positive number,
+gnus will check all foreign groups with this level or lower at startup.
+This might take quite a while, especially if you subscribe to lots of
+groups from different @sc{nntp} servers. Also @pxref{Group Levels};
+@code{gnus-activate-level} also affects activation of foreign
+newsgroups.
@node Group Parameters
@kindex T D (Topic)
@findex gnus-topic-remove-group
Remove a group from the current topic (@code{gnus-topic-remove-group}).
+This command is mainly useful if you have the same group in several
+topics and wish to remove it from one of the topics. You may also
+remove a group from all topics, but in that case, Gnus will add it to
+the root topic the next time you start Gnus. In fact, all new groups
+(which, naturally, don't belong to any topic) will show up in the root
+topic.
+
This command uses the process/prefix convention
(@pxref{Process/Prefix}).
@vindex gnus-summary-zcore-fuzz
Zcore, @samp{+} if above the default level and @samp{-} if below the
default level. If the difference between
-@code{gnus-summary-default-level} and the score is less than
+@code{gnus-summary-default-score} and the score is less than
@code{gnus-summary-zcore-fuzz}, this spec will not be used.
@item V
Total thread score.
@subsection Summary Buffer Mode Line
@vindex gnus-summary-mode-line-format
-You can also change the format of the summary mode bar. Set
-@code{gnus-summary-mode-line-format} to whatever you like. The default
-is @samp{Gnus: %%b [%A] %Z}.
+You can also change the format of the summary mode bar (@pxref{Mode Line
+Formatting}). Set @code{gnus-summary-mode-line-format} to whatever you
+like. The default is @samp{Gnus: %%b [%A] %Z}.
Here are the elements you can play with:
Unprefixed group name.
@item A
Current article number.
+@item z
+Current article score.
@item V
Gnus version.
@item U
@kindex W l (Summary)
@findex gnus-summary-stop-page-breaking
Remove page breaks from the current article
-(@code{gnus-summary-stop-page-breaking}).
+(@code{gnus-summary-stop-page-breaking}). @xref{Misc Article} for page
+delimiters.
@item W r
@kindex W r (Summary)
@item gnus-tree-mode-line-format
@vindex gnus-tree-mode-line-format
-A format string for the mode bar in the tree mode buffers. The default
-is @samp{Gnus: %%b %S %Z}. For a list of valid specs, @pxref{Summary
-Buffer Mode Line}.
+A format string for the mode bar in the tree mode buffers (@pxref{Mode
+Line Formatting}). The default is @samp{Gnus: %%b %S %Z}. For a list
+of valid specs, @pxref{Summary Buffer Mode Line}.
@item gnus-selected-tree-face
@vindex gnus-selected-tree-face
@kindex C-c ^ (Article)
@findex gnus-article-refer-article
If point is in the neighborhood of a @code{Message-ID} and you press
-@kbd{r}, gnus will try to get that article from the server
+@kbd{C-c ^}, gnus will try to get that article from the server
(@code{gnus-article-refer-article}).
@item C-c C-m
@vindex gnus-article-mode-line-format
@item gnus-article-mode-line-format
This variable is a format string along the same lines as
-@code{gnus-summary-mode-line-format}. It accepts the same
-format specifications as that variable, with one extension:
+@code{gnus-summary-mode-line-format} (@pxref{Mode Line Formatting}). It
+accepts the same format specifications as that variable, with one
+extension:
@table @samp
@item w
@vindex gnus-server-mode-line-format
The mode line can also be customized by using the
-@code{gnus-server-mode-line-format} variable. The following specs are
-understood:
+@code{gnus-server-mode-line-format} variable (@pxref{Mode Line
+Formatting}). The following specs are understood:
@table @samp
@item S
@enumerate
@item
-@samp{group}: If the split is a string, that will be taken as a group name.
+@samp{group}: If the split is a string, that will be taken as a group
+name. Normal regexp match expansion will be done. See below for
+examples.
@item
@var{(FIELD VALUE SPLIT)}: If the split is a list, the first element of
(any "debian-\\(\\w*\\)@@lists.debian.org" "mail.debian.\\1")
@end example
+If the string contains the element @samp{\&}, then the previously
+matched string will be substituted. Similarly, the elements @samp{\1}
+up to @samp{\9} will be substituted with the text matched by the
+groupings 1 through 9.
+
+
@node Mail and Procmail
@subsection Mail and Procmail
@cindex procmail
@item nngateway-mail2news-header-transformation
Creates a @code{To} header that looks like
-@samp{mail2news}@@@code{nngateway-address}.
+@code{nngateway-address}.
+
+Here's an example:
+
+@lisp
+(setq gnus-post-method
+ '(nngateway "mail2news@@replay.com"
+ (nngateway-header-transformation
+ nngateway-mail2news-header-transformation)))
+@end lisp
@end table
@item gnus-category-mode-line-format
@vindex gnus-category-mode-line-format
-Format of the category mode line.
+Format of the category mode line (@pxref{Mode Line Formatting}).
@item gnus-agent-short-article
@vindex gnus-agent-short-article
around with your score files behind Gnus' back and want to see the
effect you're having.
-@item V a
-@kindex V a (Summary)
-@findex gnus-summary-score-entry
-Add a new score entry, and allow specifying all elements
-(@code{gnus-summary-score-entry}).
-
@item V c
@kindex V c (Summary)
@findex gnus-score-change-score-file
@item Lines, Chars
These two headers use different match types: @code{<}, @code{>},
-@code{=}, @code{>=} and @code{<=}. When matching on @code{Lines}, be
-careful because some backends (like @code{nndir}) do not generate
-@code{Lines} header, so every article ends up being marked as having 0
-lines. This can lead to strange results if you happen to lower score of
-the articles with few lines.
+@code{=}, @code{>=} and @code{<=}.
+
+These predicates are true if
+
+@example
+(PREDICATE HEADER MATCH)
+@end example
+
+evaluates to non-@code{nil}. For instance, the advanced match
+@code{("lines" 4 <)} (@pxref{Advanced Scoring}) will result in the
+following form:
+
+@lisp
+(< header-value 4)
+@end lisp
+
+Or to put it another way: When using @code{<} on @code{Lines} with 4 as
+the match, we get the score added if the article has less than 4 lines.
+(It's easy to get confused and think it's the other way around. But
+it's not. I think.)
+
+When matching on @code{Lines}, be careful because some backends (like
+@code{nndir}) do not generate @code{Lines} header, so every article ends
+up being marked as having 0 lines. This can lead to strange results if
+you happen to lower score of the articles with few lines.
@item Date
For the Date header we have three kinda silly match types:
The kill to score conversion package isn't included in Gnus by default.
You can fetch it from
-@file{http://www.ifi.uio.no/~larsi/ding-other/gnus-kill-to-score}.
+@file{http://www.stud.ifi.uio.no/~larsi/ding-other/gnus-kill-to-score}.
If your old kill files are very complex---if they contain more
non-@code{gnus-kill} forms than not, you'll have to convert them by
@section Formatting Variables
@cindex formatting variables
-Throughout this manual you've probably noticed lots of variables called things like @code{gnus-group-line-format} and
+Throughout this manual you've probably noticed lots of variables called
+things like @code{gnus-group-line-format} and
@code{gnus-summary-mode-line-format}. These control how Gnus is to
output lines in the various buffers. There's quite a lot of them.
Fortunately, they all use the same syntax, so there's not that much to
@menu
* Formatting Basics:: A formatting variable is basically a format string.
+* Mode Line Formatting:: Some rules about mode line formatting variables.
* Advanced Formatting:: Modifying output in various ways.
* User-Defined Specs:: Having Gnus call your own functions.
* Formatting Fonts:: Making the formatting look colorful and nice.
less than 4 characters wide.
+@node Mode Line Formatting
+@subsection Mode Line Formatting
+
+Mode line formatting variables (e.g.,
+@code{gnus-summary-mode-line-format}) follow the same rules as other,
+buffer line oriented formatting variables (@pxref{Formatting Basics})
+with the following two differences:
+
+@enumerate
+
+@item
+There must be no newline (@samp{\n}) at the end.
+
+@item
+The special @samp{%%b} spec can be used to display the buffer name.
+Well, it's no spec at all, really---@samp{%%} is just a way to quote
+@samp{%} to allow it to pass through the formatting machinery unmangled,
+so that Emacs receives @samp{%b}, which is something the Emacs mode line
+display interprets to mean ``show the buffer name''. For a full list of
+mode line specs Emacs understands, see the documentation of the
+@code{mode-line-format} variable.
+
+@end enumerate
+
+
@node Advanced Formatting
@subsection Advanced Formatting
highlighted (with @code{gnus-mouse-face}) when you put the mouse pointer
over it.
-Text inside the @samp{%[} and @samp{%]} specifiers will have their
+Text inside the @samp{%@{} and @samp{%@}} specifiers will have their
normal faces set using @code{gnus-face-0}, which is @code{bold} by
-default. If you say @samp{%1[}, you'll get @code{gnus-face-1} instead,
+default. If you say @samp{%1@{}, you'll get @code{gnus-face-1} instead,
and so on. Create as many faces as you wish. The same goes for the
@code{mouse-face} specs---you can say @samp{%3(hello%)} to have
@samp{hello} mouse-highlighted with @code{gnus-mouse-face-3}.
If you want to investigate the person responsible for this outrage, you
can point your (feh!) web browser to
-@file{http://www.ifi.uio.no/~larsi/}. This is also the primary
+@file{http://www.stud.ifi.uio.no/~larsi/}. This is also the primary
distribution point for the new and spiffy versions of Gnus, and is known
as The Site That Destroys Newsrcs And Drives People Mad.
Jari Aalto,
Adrian Aichner,
+Vladimir Alexiev,
Russ Allbery,
Peter Arius,
Matt Armstrong,
Joao Cachopo,
Zlatko Calusic,
Massimo Campostrini,
+Castor,
Dan Christensen,
+Kevin Christian,
Michael R. Cook,
Glenn Coombs,
Frank D. Cringle,
Sam Falkner,
Nelson Jose dos Santos Ferreira,
Sigbjorn Finne,
+Decklin Foster,
Gary D. Foster,
Paul Franklin,
Guy Geens,
Dan Schmidt,
Ralph Schleicher,
Philippe Schnoebelen,
+Andreas Schwab,
Randal L. Schwartz,
Justin Sheehy,
Danny Siu,
Darren Stalder,
Richard Stallman,
Greg Stark,
+Sam Steingold,
Paul Stodghill,
Kurt Swanson,
Samuel Tardieu,
* ding Gnus:: New things in Gnus 5.0/5.1, the first new Gnus.
* September Gnus:: The Thing Formally Known As Gnus 5.3/5.3.
* Red Gnus:: Third time best---Gnus 5.4/5.5.
-* Quassia Gnus:: Two times two is four, or Gnus 5.6.13.
+* Quassia Gnus:: Two times two is four, or Gnus 5.6.23.
@end menu
These lists are, of course, just @emph{short} overviews of the
@node Quassia Gnus
@subsubsection Quassia Gnus
-New features in Gnus 5.6.13:
+New features in Gnus 5.6.23:
@itemize @bullet
@end example
@item
- tanken var at når du bruker `gnus-startup-file' som prefix (FOO) til å lete
+ tanken var at når du bruker `gnus-startup-file' som prefix (FOO) til lete
opp en fil FOO-SERVER, FOO-SERVER.el, FOO-SERVER.eld, kan du la den være en
liste hvor du bruker hvert element i listen som FOO, istedet. da kunne man
hatt forskjellige serveres startup-filer forskjellige steder.
for sci? first the sci.something? then sci.somethingelse?...
@item
-Ja, det burde være en måte å si slikt. Kanskje en ny variabel?
-`gnus-use-few-score-files'? Så kunne score-regler legges til den
+Ja, det burde være en måte si slikt. Kanskje en ny variabel?
+`gnus-use-few-score-files'? S kunne score-regler legges til den
"mest" lokale score-fila. F. eks. ville no-gruppene betjenes av
"no.all.SCORE", osv.
@item
gnus-article-hide-pgp
-Selv ville jeg nok ha valgt å slette den dersom teksten matcher
+Selv ville jeg nok ha valgt slette den dersom teksten matcher
@example
"\\(This\s+\\)?[^ ]+ has been automatically signed by"
@end example
file, for instance.
@item
+With dummy roots, `^' and then selecing the first article
+in any other dummy thread will make gnus highlight the
+dummy root instead of the first article.
+
+@item
+Propagate all group properties (marks, article numbers, etc) up to the
+topics for displaying.
+
+@item
+`n' in the group buffer with topics should go to the next group
+with unread articles, even if that group is hidden in a topic.
+
+@item
Solve the halting problem.
@c TODO
projects / elisp / gnus.git- / blobdiff