-\input texinfo @c -*-texinfo-*-
+\input texinfo
@setfilename gnus
-@settitle Pterodactyl Gnus 0.73 Manual
-@synindex fn cp
-@synindex vr cp
-@synindex pg cp
-@c @direntry
-@c * Gnus: (gnus). The newsreader Gnus.
-@c @end direntry
+@settitle T-gnus 6.17 Manual
+@syncodeindex fn cp
+@syncodeindex vr cp
+@syncodeindex pg cp
+@dircategory Emacs
+@direntry
+* Gnus: (gnus). The newsreader Gnus.
+@end direntry
+@documentencoding ISO-8859-1
@iftex
@finalout
@end iftex
\usepackage[latin1]{inputenc}
\usepackage{pagestyle}
\usepackage{epsfig}
-\usepackage{bembo}
\usepackage{pixidx}
+\input{gnusconfig.tex}
+
+\ifx\pdfoutput\undefined
+\else
+\usepackage[pdftex,bookmarks,colorlinks=true]{hyperref}
+\usepackage{thumbpdf}
+\pdfcompresslevel=9
+\fi
\makeindex
\begin{document}
+\newcommand{\gnusversionname}{T-gnus v6.17}
\newcommand{\gnuschaptername}{}
\newcommand{\gnussectionname}{}
\newcommand{\gnusbackslash}{/}
+\newcommand{\gnusref}[1]{``#1'' on page \pageref{#1}}
+\ifx\pdfoutput\undefined
+\newcommand{\gnusuref}[1]{\gnustt{#1}}
+\else
+\newcommand{\gnusuref}[1]{\href{#1}{\gnustt{#1}}}
+\fi
\newcommand{\gnusxref}[1]{See ``#1'' on page \pageref{#1}}
\newcommand{\gnuspxref}[1]{see ``#1'' on page \pageref{#1}}
\newcommand{\gnuskindex}[1]{\index{#1}}
\newcommand{\gnusindex}[1]{\index{#1}}
-\newcommand{\gnustt}[1]{{\fontfamily{pfu}\fontsize{10pt}{10}\selectfont #1}}
+\newcommand{\gnustt}[1]{{\gnusselectttfont{}#1}}
\newcommand{\gnuscode}[1]{\gnustt{#1}}
-\newcommand{\gnussamp}[1]{``{\fontencoding{OT1}\fontfamily{pfu}\fontsize{10pt}{10}\selectfont #1}''}
+\newcommand{\gnusasis}[1]{\gnustt{#1}}
+\newcommand{\gnusurl}[1]{\gnustt{#1}}
+\newcommand{\gnuscommand}[1]{\gnustt{#1}}
+\newcommand{\gnusenv}[1]{\gnustt{#1}}
+\newcommand{\gnussamp}[1]{``{\fontencoding{OT1}\gnusselectttfont{}#1}''}
\newcommand{\gnuslisp}[1]{\gnustt{#1}}
\newcommand{\gnuskbd}[1]{`\gnustt{#1}'}
+\newcommand{\gnuskey}[1]{`\gnustt{#1}'}
\newcommand{\gnusfile}[1]{`\gnustt{#1}'}
\newcommand{\gnusdfn}[1]{\textit{#1}}
\newcommand{\gnusi}[1]{\textit{#1}}
+\newcommand{\gnusr}[1]{\textrm{#1}}
\newcommand{\gnusstrong}[1]{\textbf{#1}}
\newcommand{\gnusemph}[1]{\textit{#1}}
\newcommand{\gnusvar}[1]{{\fontsize{10pt}{10}\selectfont\textsl{\textsf{#1}}}}
\newcommand{\gnussc}[1]{\textsc{#1}}
\newcommand{\gnustitle}[1]{{\huge\textbf{#1}}}
+\newcommand{\gnusversion}[1]{{\small\textit{#1}}}
\newcommand{\gnusauthor}[1]{{\large\textbf{#1}}}
+\newcommand{\gnusresult}[1]{\gnustt{=> #1}}
+\newcommand{\gnusacronym}[1]{\textsc{#1}}
+\newcommand{\gnusemail}[1]{\textit{#1}}
\newcommand{\gnusbullet}{{${\bullet}$}}
\newcommand{\gnusdollar}{\$}
\newcommand{\gnusbraceleft}{{$>$}}
\newcommand{\gnusbraceright}{{$>$}}
-\newcommand{\gnushead}{\raisebox{-1cm}{\epsfig{figure=ps/gnus-head.eps,height=1cm}}}
+\newcommand{\gnushead}{\raisebox{-1cm}{\epsfig{figure=ps/gnus-head,height=1cm}}}
\newcommand{\gnusinteresting}{
\marginpar[\mbox{}\hfill\gnushead]{\gnushead}
}
}
\newcommand{\gnusicon}[1]{
-\marginpar[\mbox{}\hfill\raisebox{-1.5cm}{\epsfig{figure=tmp/#1-up.ps,height=1.5cm}}]{\raisebox{-1cm}{\epsfig{figure=tmp/#1-up.ps,height=1cm}}}
+\marginpar[\mbox{}\hfill\raisebox{-1.5cm}{\epsfig{figure=ps/#1-up,height=1.5cm}}]{\raisebox{-1cm}{\epsfig{figure=ps/#1-up,height=1cm}}}
}
\newcommand{\gnuspicon}[1]{
}
}{\end{list}}
+\newenvironment{asislist}%
+{\begin{list}{}{
+}
+}{\end{list}}
+
\newenvironment{kbdlist}%
{\begin{list}{}{
\labelwidth=0cm
{
\ifodd\count0
\mbox{} \hfill
-\raisebox{-0.5cm}{\epsfig{figure=ps/gnus-big-logo.eps,height=1cm}}
+\raisebox{-0.5cm}{\epsfig{figure=ps/gnus-big-logo,height=1cm}}
\else
-\raisebox{-0.5cm}{\epsfig{figure=ps/gnus-big-logo.eps,height=1cm}}
+\raisebox{-0.5cm}{\epsfig{figure=ps/gnus-big-logo,height=1cm}}
\hfill \mbox{}
\fi
}
{
\ifodd\count0
\mbox{} \hfill
-\raisebox{-0.5cm}{\epsfig{figure=ps/gnus-big-logo.eps,height=1cm}}
+\raisebox{-0.5cm}{\epsfig{figure=ps/gnus-big-logo,height=1cm}}
\else
-\raisebox{-0.5cm}{\epsfig{figure=ps/gnus-big-logo.eps,height=1cm}}
+\raisebox{-0.5cm}{\epsfig{figure=ps/gnus-big-logo,height=1cm}}
\hfill \mbox{}
\fi
}
{
\ifodd\count0
\mbox{} \hfill
-\raisebox{-0.5cm}{\epsfig{figure=ps/gnus-big-logo.eps,height=1cm}}
+\raisebox{-0.5cm}{\epsfig{figure=ps/gnus-big-logo,height=1cm}}
\else
-\raisebox{-0.5cm}{\epsfig{figure=ps/gnus-big-logo.eps,height=1cm}}
+\raisebox{-0.5cm}{\epsfig{figure=ps/gnus-big-logo,height=1cm}}
\hfill \mbox{}
\fi
}
\parindent=0cm
\addtolength{\textheight}{2cm}
-\gnustitle{\gnustitlename}\\
+\gnustitle{\gnustitlename}\hfill\gnusversion{\gnusversionname}\\
\rule{15cm}{1mm}\\
\vfill
-\hspace*{0cm}\epsfig{figure=ps/gnus-big-logo.eps,height=15cm}
+\hspace*{0cm}\epsfig{figure=ps/gnus-big-logo,height=15cm}
\vfill
\rule{15cm}{1mm}\\
\gnusauthor{by Lars Magne Ingebrigtsen}
\thispagestyle{empty}
-Copyright \copyright{} 1995,96,97,98 Free Software Foundation, Inc.
+Copyright \copyright{} 1995, 1996, 1997, 1998, 1999, 2000, 2001,
+2002, 2003, 2004
+Free Software Foundation, Inc.
-Permission is granted to make and distribute verbatim copies of
-this manual provided the copyright notice and this permission notice
-are preserved on all copies.
-Permission is granted to copy and distribute modified versions of this
-manual under the conditions for verbatim copying, provided that the
-entire resulting derived work is distributed under the terms of a
-permission notice identical to this one.
+Permission is granted to copy, distribute and/or modify this document
+under the terms of the GNU Free Documentation License, Version 1.1 or
+any later version published by the Free Software Foundation; with no
+Invariant Sections, with the Front-Cover texts being ``A GNU
+Manual'', and with the Back-Cover Texts as in (a) below. A copy of the
+license is included in the section entitled ``GNU Free Documentation
+License'' in the Emacs manual.
-Permission is granted to copy and distribute translations of this manual
-into another language, under the above conditions for modified versions.
+(a) The FSF's Back-Cover Text is: ``You have freedom to copy and modify
+this GNU Manual, like GNU software. Copies published by the Free
+Software Foundation raise funds for GNU development.''
+This document is part of a collection distributed under the GNU Free
+Documentation License. If you want to distribute this document
+separately from the collection, you can do so by adding a copy of the
+license to the document, as described in section 6 of the license.
\newpage
\end{titlepage}
@end iflatex
@end iftex
-@ifinfo
-
-This file documents Gnus, the GNU Emacs newsreader.
+@ifnottex
-Copyright (C) 1995,96 Free Software Foundation, Inc.
+This file documents gnus, the GNU Emacs newsreader.
-Permission is granted to make and distribute verbatim copies of
-this manual provided the copyright notice and this permission notice
-are preserved on all copies.
+Copyright (C) 1995, 1996, 1997, 1998, 1999, 2000, 2001, 2002, 2003, 2004
+ Free Software Foundation, Inc.
-@ignore
-Permission is granted to process this file through Tex and print the
-results, provided the printed document carries copying permission
-notice identical to this one except for the removal of this paragraph
-(this paragraph not being relevant to the printed manual).
+Permission is granted to copy, distribute and/or modify this document
+under the terms of the GNU Free Documentation License, Version 1.1 or
+any later version published by the Free Software Foundation; with the
+Invariant Sections being none, with the Front-Cover texts being ``A GNU
+Manual'', and with the Back-Cover Texts as in (a) below. A copy of the
+license is included in the section entitled ``GNU Free Documentation
+License'' in the Emacs manual.
-@end ignore
-Permission is granted to copy and distribute modified versions of this
-manual under the conditions for verbatim copying, provided also that the
-entire resulting derived work is distributed under the terms of a
-permission notice identical to this one.
+(a) The FSF's Back-Cover Text is: ``You have freedom to copy and modify
+this GNU Manual, like GNU software. Copies published by the Free
+Software Foundation raise funds for GNU development.''
-Permission is granted to copy and distribute translations of this manual
-into another language, under the above conditions for modified versions.
-@end ifinfo
+This document is part of a collection distributed under the GNU Free
+Documentation License. If you want to distribute this document
+separately from the collection, you can do so by adding a copy of the
+license to the document, as described in section 6 of the license.
+@end ifnottex
@tex
@titlepage
-@title Pterodactyl Gnus 0.73 Manual
+@title T-gnus 6.17 Manual
@author by Lars Magne Ingebrigtsen
@page
@vskip 0pt plus 1filll
-Copyright @copyright{} 1995,96,97 Free Software Foundation, Inc.
-
-Permission is granted to make and distribute verbatim copies of
-this manual provided the copyright notice and this permission notice
-are preserved on all copies.
-
-Permission is granted to copy and distribute modified versions of this
-manual under the conditions for verbatim copying, provided that the
-entire resulting derived work is distributed under the terms of a
-permission notice identical to this one.
-
-Permission is granted to copy and distribute translations of this manual
-into another language, under the above conditions for modified versions.
+Copyright @copyright{} 1995, 1996, 1997, 1998, 1999, 2000, 2001,
+2002, 2003, 2004
+ Free Software Foundation, Inc.
+
+Permission is granted to copy, distribute and/or modify this document
+under the terms of the GNU Free Documentation License, Version 1.1 or
+any later version published by the Free Software Foundation; with no
+Invariant Sections, with the Front-Cover texts being ``A GNU
+Manual'', and with the Back-Cover Texts as in (a) below. A copy of the
+license is included in the section entitled ``GNU Free Documentation
+License'' in the Emacs manual.
+
+(a) The FSF's Back-Cover Text is: ``You have freedom to copy and modify
+this GNU Manual, like GNU software. Copies published by the Free
+Software Foundation raise funds for GNU development.''
+
+This document is part of a collection distributed under the GNU Free
+Documentation License. If you want to distribute this document
+separately from the collection, you can do so by adding a copy of the
+license to the document, as described in section 6 of the license.
@end titlepage
@page
@node Top
-@top The Gnus Newsreader
+@top The gnus Newsreader
@ifinfo
-You can read news (and mail) from within Emacs by using Gnus. The news
-can be gotten by any nefarious means you can think of---@sc{nntp}, local
+You can read news (and mail) from within Emacs by using T-gnus. The news
+can be gotten by any nefarious means you can think of---@acronym{NNTP}, local
spool or your mbox file. All at the same time, if you want to push your
luck.
-This manual corresponds to Pterodactyl Gnus 0.73.
+T-gnus provides @acronym{MIME} features based on @acronym{SEMI} API. So
+T-gnus supports your right to read strange messages including big images
+or other various kinds of formats. T-gnus also supports
+internationalization/localization and multiscript features based on MULE
+API. So T-gnus does not discriminate various language communities. Oh,
+if you are a Klingon, please wait Unicode Next Generation.
+
+This manual corresponds to T-gnus 6.17.
@end ifinfo
Gnus is a message-reading laboratory. It will let you look at just
about anything as if it were a newsgroup. You can read mail with it,
-you can browse directories with it, you can @code{ftp} with it---you can
-even read news with it!
+you can browse directories with it, you can @code{ftp} with it---you
+can even read news with it!
Gnus tries to empower people who read news the same way Emacs empowers
people who edit text. Gnus sets no limits to what the user should be
-allowed to do. Users are encouraged to extend Gnus to make it behave
+allowed to do. Users are encouraged to extend gnus to make it behave
like they want it to behave. A program should not control people;
people should be empowered to do what they want by using (or abusing)
the program.
@end iftex
-
@menu
-* Starting Up:: Finding news can be a pain.
-* The Group Buffer:: Selecting, subscribing and killing groups.
-* The Summary Buffer:: Reading, saving and posting articles.
-* The Article Buffer:: Displaying and handling articles.
-* Composing Messages:: Information on sending mail and news.
-* Select Methods:: Gnus reads all messages from various select methods.
-* Scoring:: Assigning values to articles.
-* Various:: General purpose settings.
-* The End:: Farewell and goodbye.
-* Appendices:: Terminology, Emacs intro, FAQ, History, Internals.
-* Index:: Variable, function and concept index.
-* Key Index:: Key Index.
+* Starting Up:: Finding news can be a pain.
+* Group Buffer:: Selecting, subscribing and killing groups.
+* Summary Buffer:: Reading, saving and posting articles.
+* Article Buffer:: Displaying and handling articles.
+* Composing Messages:: Information on sending mail and news.
+* Select Methods:: Gnus reads all messages from various select methods.
+* Scoring:: Assigning values to articles.
+* Various:: General purpose settings.
+* The End:: Farewell and goodbye.
+* Appendices:: Terminology, Emacs intro, @acronym{FAQ}, History, Internals.
+* Index:: Variable, function and concept index.
+* Key Index:: Key Index.
+
+Other related manuals
+
+* Message:(message). Composing messages.
+* Emacs-MIME:(emacs-mime). Composing messages; @acronym{MIME}-specific parts.
+* Sieve:(sieve). Managing Sieve scripts in Emacs.
+* PGG:(pgg). @acronym{PGP/MIME} with Gnus.
+* SASL:(sasl). @acronym{SASL} authentication in Emacs.
+
+@detailmenu
+ --- The Detailed Node Listing ---
+
+Starting Gnus
+
+* Finding the News:: Choosing a method for getting news.
+* The First Time:: What does Gnus do the first time you start it?
+* The Server is Down:: How can I read my mail then?
+* Slave Gnusae:: You can have more than one Gnus active at a time.
+* Fetching a Group:: Starting Gnus just to read a group.
+* New Groups:: What is Gnus supposed to do with new groups?
+* Changing Servers:: You may want to move from one server to another.
+* Startup Files:: Those pesky startup files---@file{.newsrc}.
+* Auto Save:: Recovering from a crash.
+* The Active File:: Reading the active file over a slow line Takes Time.
+* Startup Variables:: Other variables you might change.
+
+New Groups
+
+* Checking New Groups:: Determining what groups are new.
+* Subscription Methods:: What Gnus should do with new groups.
+* Filtering New Groups:: Making Gnus ignore certain new groups.
+
+Group Buffer
+
+* Group Buffer Format:: Information listed and how you can change it.
+* Group Maneuvering:: Commands for moving in the group buffer.
+* Selecting a Group:: Actually reading news.
+* Subscription Commands:: Unsubscribing, killing, subscribing.
+* Group Data:: Changing the info for a group.
+* Group Levels:: Levels? What are those, then?
+* Group Score:: A mechanism for finding out what groups you like.
+* Marking Groups:: You can mark groups for later processing.
+* Foreign Groups:: Creating and editing groups.
+* Group Parameters:: Each group may have different parameters set.
+* Listing Groups:: Gnus can list various subsets of the groups.
+* Sorting Groups:: Re-arrange the group order.
+* Group Maintenance:: Maintaining a tidy @file{.newsrc} file.
+* Browse Foreign Server:: You can browse a server. See what it has to offer.
+* Exiting Gnus:: Stop reading news and get some work done.
+* Group Topics:: A folding group mode divided into topics.
+* Misc Group Stuff:: Other stuff that you can to do.
+
+Group Buffer Format
+
+* Group Line Specification:: Deciding how the group buffer is to look.
+* Group Mode Line Specification:: The group buffer mode line.
+* Group Highlighting:: Having nice colors in the group buffer.
+
+Group Topics
+
+* Topic Commands:: Interactive E-Z commands.
+* Topic Variables:: How to customize the topics the Lisp Way.
+* Topic Sorting:: Sorting each topic individually.
+* Topic Topology:: A map of the world.
+* Topic Parameters:: Parameters that apply to all groups in a topic.
+
+Misc Group Stuff
+
+* Scanning New Messages:: Asking Gnus to see whether new messages have arrived.
+* Group Information:: Information and help on groups and Gnus.
+* Group Timestamp:: Making Gnus keep track of when you last read a group.
+* File Commands:: Reading and writing the Gnus files.
+* Sieve Commands:: Managing Sieve scripts.
+
+Summary Buffer
+
+* Summary Buffer Format:: Deciding how the summary buffer is to look.
+* Summary Maneuvering:: Moving around the summary buffer.
+* Choosing Articles:: Reading articles.
+* Paging the Article:: Scrolling the current article.
+* Reply Followup and Post:: Posting articles.
+* Delayed Articles:: Send articles at a later time.
+* Marking Articles:: Marking articles as read, expirable, etc.
+* Limiting:: You can limit the summary buffer.
+* Threading:: How threads are made.
+* Sorting the Summary Buffer:: How articles and threads are sorted.
+* Asynchronous Fetching:: Gnus might be able to pre-fetch articles.
+* Article Caching:: You may store articles in a cache.
+* Persistent Articles:: Making articles expiry-resistant.
+* Article Backlog:: Having already read articles hang around.
+* Saving Articles:: Ways of customizing article saving.
+* Decoding Articles:: Gnus can treat series of (uu)encoded articles.
+* Article Treatment:: The article buffer can be mangled at will.
+* MIME Commands:: Doing MIMEy things with the articles.
+* Charsets:: Character set issues.
+* Article Commands:: Doing various things with the article buffer.
+* Summary Sorting:: Sorting the summary buffer in various ways.
+* Finding the Parent:: No child support? Get the parent.
+* Alternative Approaches:: Reading using non-default summaries.
+* Tree Display:: A more visual display of threads.
+* Mail Group Commands:: Some commands can only be used in mail groups.
+* Various Summary Stuff:: What didn't fit anywhere else.
+* Exiting the Summary Buffer:: Returning to the Group buffer,
+ or reselecting the current group.
+* Crosspost Handling:: How crossposted articles are dealt with.
+* Duplicate Suppression:: An alternative when crosspost handling fails.
+* Security:: Decrypt and Verify.
+* Mailing List:: Mailing list minor mode.
+
+Summary Buffer Format
+
+* Summary Buffer Lines:: You can specify how summary lines should look.
+* To From Newsgroups:: How to not display your own name.
+* Summary Buffer Mode Line:: You can say how the mode line should look.
+* Summary Highlighting:: Making the summary buffer all pretty and nice.
+
+Choosing Articles
+
+* Choosing Commands:: Commands for choosing articles.
+* Choosing Variables:: Variables that influence these commands.
+
+Reply, Followup and Post
+
+* Summary Mail Commands:: Sending mail.
+* Summary Post Commands:: Sending news.
+* Summary Message Commands:: Other Message-related commands.
+* Canceling and Superseding::
+
+Marking Articles
+
+* Unread Articles:: Marks for unread articles.
+* Read Articles:: Marks for read articles.
+* Other Marks:: Marks that do not affect readedness.
+
+Marking Articles
+
+* Setting Marks:: How to set and remove marks.
+* Generic Marking Commands:: How to customize the marking.
+* Setting Process Marks:: How to mark articles for later processing.
+
+Threading
+
+* Customizing Threading:: Variables you can change to affect the threading.
+* Thread Commands:: Thread based commands in the summary buffer.
+
+Customizing Threading
+
+* Loose Threads:: How Gnus gathers loose threads into bigger threads.
+* Filling In Threads:: Making the threads displayed look fuller.
+* More Threading:: Even more variables for fiddling with threads.
+* Low-Level Threading:: You thought it was over@dots{} but you were wrong!
+
+Decoding Articles
+
+* Uuencoded Articles:: Uudecode articles.
+* Shell Archives:: Unshar articles.
+* PostScript Files:: Split PostScript.
+* Other Files:: Plain save and binhex.
+* Decoding Variables:: Variables for a happy decoding.
+* Viewing Files:: You want to look at the result of the decoding?
+
+Decoding Variables
+
+* Rule Variables:: Variables that say how a file is to be viewed.
+* Other Decode Variables:: Other decode variables.
+* Uuencoding and Posting:: Variables for customizing uuencoding.
+
+Article Treatment
+
+* Article Highlighting:: You want to make the article look like fruit salad.
+* Article Fontisizing:: Making emphasized text look nice.
+* Article Hiding:: You also want to make certain info go away.
+* Article Washing:: Lots of way-neat functions to make life better.
+* Article Header:: Doing various header transformations.
+* Article Buttons:: Click on URLs, Message-IDs, addresses and the like.
+* Article Button Levels:: Controlling appearance of buttons.
+* Article Date:: Grumble, UT!
+* Article Display:: Display various stuff---X-Face, Picons, Smileys
+* Article Signature:: What is a signature?
+* Article Miscellanea:: Various other stuff.
+
+Alternative Approaches
+
+* Pick and Read:: First mark articles and then read them.
+* Binary Groups:: Auto-decode all articles.
+
+Various Summary Stuff
+
+* Summary Group Information:: Information oriented commands.
+* Searching for Articles:: Multiple article commands.
+* Summary Generation Commands::
+* Really Various Summary Commands:: Those pesky non-conformant commands.
+
+Article Buffer
+
+* Hiding Headers:: Deciding what headers should be displayed.
+* Using MIME:: Pushing articles through @acronym{MIME} before reading them.
+* Customizing Articles:: Tailoring the look of the articles.
+* Article Keymap:: Keystrokes available in the article buffer.
+* Misc Article:: Other stuff.
+
+Composing Messages
+
+* Mail:: Mailing and replying.
+* Posting Server:: What server should you post and mail via?
+* POP before SMTP:: You cannot send a mail unless you read a mail.
+* Mail and Post:: Mailing and posting at the same time.
+* Archived Messages:: Where Gnus stores the messages you've sent.
+* Posting Styles:: An easier way to specify who you are.
+* Drafts:: Postponing messages and rejected messages.
+* Rejected Articles:: What happens if the server doesn't like your article?
+* Signing and encrypting:: How to compose secure messages.
+
+Select Methods
+
+* Server Buffer:: Making and editing virtual servers.
+* Getting News:: Reading USENET news with Gnus.
+* Getting Mail:: Reading your personal mail with Gnus.
+* Browsing the Web:: Getting messages from a plethora of Web sources.
+* IMAP:: Using Gnus as a @acronym{IMAP} client.
+* Other Sources:: Reading directories, files, SOUP packets.
+* Combined Groups:: Combining groups into one group.
+* Gnus Unplugged:: Reading news and mail offline.
+
+Server Buffer
+
+* Server Buffer Format:: You can customize the look of this buffer.
+* Server Commands:: Commands to manipulate servers.
+* Example Methods:: Examples server specifications.
+* Creating a Virtual Server:: An example session.
+* Server Variables:: Which variables to set.
+* Servers and Methods:: You can use server names as select methods.
+* Unavailable Servers:: Some servers you try to contact may be down.
+
+Getting News
+
+* NNTP:: Reading news from an @acronym{NNTP} server.
+* News Spool:: Reading news from the local spool.
+
+@acronym{NNTP}
+
+* Direct Functions:: Connecting directly to the server.
+* Indirect Functions:: Connecting indirectly to the server.
+* Common Variables:: Understood by several connection functions.
+
+Getting Mail
+
+* Mail in a Newsreader:: Important introductory notes.
+* Getting Started Reading Mail:: A simple cookbook example.
+* Splitting Mail:: How to create mail groups.
+* Mail Sources:: How to tell Gnus where to get mail from.
+* Mail Back End Variables:: Variables for customizing mail handling.
+* Fancy Mail Splitting:: Gnus can do hairy splitting of incoming mail.
+* Group Mail Splitting:: Use group customize to drive mail splitting.
+* Incorporating Old Mail:: What about the old mail you have?
+* Expiring Mail:: Getting rid of unwanted mail.
+* Washing Mail:: Removing cruft from the mail you get.
+* Duplicates:: Dealing with duplicated mail.
+* Not Reading Mail:: Using mail back ends for reading other files.
+* Choosing a Mail Back End:: Gnus can read a variety of mail formats.
+
+Mail Sources
+
+* Mail Source Specifiers:: How to specify what a mail source is.
+* Mail Source Customization:: Some variables that influence things.
+* Fetching Mail:: Using the mail source specifiers.
+
+Choosing a Mail Back End
+
+* Unix Mail Box:: Using the (quite) standard Un*x mbox.
+* Rmail Babyl:: Emacs programs use the Rmail Babyl format.
+* Mail Spool:: Store your mail in a private spool?
+* MH Spool:: An mhspool-like back end.
+* Maildir:: Another one-file-per-message format.
+* Mail Folders:: Having one file for each group.
+* Comparing Mail Back Ends:: An in-depth looks at pros and cons.
+
+Browsing the Web
+
+* Archiving Mail::
+* Web Searches:: Creating groups from articles that match a string.
+* Slashdot:: Reading the Slashdot comments.
+* Ultimate:: The Ultimate Bulletin Board systems.
+* Web Archive:: Reading mailing list archived on web.
+* RSS:: Reading RDF site summary.
+* Customizing w3:: Doing stuff to Emacs/w3 from Gnus.
+
+@acronym{IMAP}
+
+* Splitting in IMAP:: Splitting mail with nnimap.
+* Expiring in IMAP:: Expiring mail with nnimap.
+* Editing IMAP ACLs:: Limiting/enabling other users access to a mailbox.
+* Expunging mailboxes:: Equivalent of a ``compress mailbox'' button.
+* A note on namespaces:: How to (not) use @acronym{IMAP} namespace in Gnus.
+* Debugging IMAP:: What to do when things don't work.
+
+Other Sources
+
+* Directory Groups:: You can read a directory as if it was a newsgroup.
+* Anything Groups:: Dired? Who needs dired?
+* Document Groups:: Single files can be the basis of a group.
+* SOUP:: Reading @sc{soup} packets ``offline''.
+* Mail-To-News Gateways:: Posting articles via mail-to-news gateways.
+
+Document Groups
+
+* Document Server Internals:: How to add your own document types.
+
+SOUP
+
+* SOUP Commands:: Commands for creating and sending @sc{soup} packets
+* SOUP Groups:: A back end for reading @sc{soup} packets.
+* SOUP Replies:: How to enable @code{nnsoup} to take over mail and news.
+
+Combined Groups
+
+* Virtual Groups:: Combining articles from many groups.
+* Kibozed Groups:: Looking through parts of the newsfeed for articles.
+
+Gnus Unplugged
+
+* Agent Basics:: How it all is supposed to work.
+* Agent Categories:: How to tell the Gnus Agent what to download.
+* Agent Commands:: New commands for all the buffers.
+* Agent Visuals:: Ways that the agent may effect your summary buffer.
+* Agent as Cache:: The Agent is a big cache too.
+* Agent Expiry:: How to make old articles go away.
+* Agent Regeneration:: How to recover from lost connections and other accidents.
+* Agent and IMAP:: How to use the Agent with @acronym{IMAP}.
+* Outgoing Messages:: What happens when you post/mail something?
+* Agent Variables:: Customizing is fun.
+* Example Setup:: An example @file{~/.gnus.el} file for offline people.
+* Batching Agents:: How to fetch news from a @code{cron} job.
+* Agent Caveats:: What you think it'll do and what it does.
+
+Agent Categories
+
+* Category Syntax:: What a category looks like.
+* Category Buffer:: A buffer for maintaining categories.
+* Category Variables:: Customize'r'Us.
+
+Agent Commands
+
+* Group Agent Commands:: Configure groups and fetch their contents.
+* Summary Agent Commands:: Manually select then fetch specific articles.
+* Server Agent Commands:: Select the servers that are supported by the agent.
+
+Scoring
+
+* Summary Score Commands:: Adding score entries for the current group.
+* Group Score Commands:: General score commands.
+* Score Variables:: Customize your scoring. (My, what terminology).
+* Score File Format:: What a score file may contain.
+* Score File Editing:: You can edit score files by hand as well.
+* Adaptive Scoring:: Big Sister Gnus knows what you read.
+* Home Score File:: How to say where new score entries are to go.
+* Followups To Yourself:: Having Gnus notice when people answer you.
+* Scoring On Other Headers:: Scoring on non-standard headers.
+* Scoring Tips:: How to score effectively.
+* Reverse Scoring:: That problem child of old is not problem.
+* Global Score Files:: Earth-spanning, ear-splitting score files.
+* Kill Files:: They are still here, but they can be ignored.
+* Converting Kill Files:: Translating kill files to score files.
+* Advanced Scoring:: Using logical expressions to build score rules.
+* Score Decays:: It can be useful to let scores wither away.
+
+Advanced Scoring
+
+* Advanced Scoring Syntax:: A definition.
+* Advanced Scoring Examples:: What they look like.
+* Advanced Scoring Tips:: Getting the most out of it.
+
+Various
+
+* Process/Prefix:: A convention used by many treatment commands.
+* Interactive:: Making Gnus ask you many questions.
+* Symbolic Prefixes:: How to supply some Gnus functions with options.
+* Formatting Variables:: You can specify what buffers should look like.
+* Window Layout:: Configuring the Gnus buffer windows.
+* Faces and Fonts:: How to change how faces look.
+* Compilation:: How to speed Gnus up.
+* Mode Lines:: Displaying information in the mode lines.
+* Highlighting and Menus:: Making buffers look all nice and cozy.
+* Buttons:: Get tendinitis in ten easy steps!
+* Daemons:: Gnus can do things behind your back.
+* NoCeM:: How to avoid spam and other fatty foods.
+* Undo:: Some actions can be undone.
+* Predicate Specifiers:: Specifying predicates.
+* Moderation:: What to do if you're a moderator.
+* Image Enhancements:: Modern versions of Emacs/XEmacs can display images.
+* Fuzzy Matching:: What's the big fuzz?
+* Thwarting Email Spam:: A how-to on avoiding unsolicited commercial email.
+* Other modes:: Interaction with other modes.
+* Various Various:: Things that are really various.
+
+Formatting Variables
+
+* Formatting Basics:: A formatting variable is basically a format string.
+* Mode Line Formatting:: Some rules about mode line formatting variables.
+* Advanced Formatting:: Modifying output in various ways.
+* User-Defined Specs:: Having Gnus call your own functions.
+* Formatting Fonts:: Making the formatting look colorful and nice.
+* Positioning Point:: Moving point to a position after an operation.
+* Tabulation:: Tabulating your output.
+* Wide Characters:: Dealing with wide characters.
+
+Image Enhancements
+
+* X-Face:: Display a funky, teensy black-and-white image.
+* Face:: Display a funkier, teensier colored image.
+* Smileys:: Show all those happy faces the way they were meant to be shown.
+* Picons:: How to display pictures of what you're reading.
+* XVarious:: Other XEmacsy Gnusey variables.
+
+Thwarting Email Spam
+
+* The problem of spam:: Some background, and some solutions
+* Anti-Spam Basics:: Simple steps to reduce the amount of spam.
+* SpamAssassin:: How to use external anti-spam tools.
+* Hashcash:: Reduce spam by burning CPU time.
+* Filtering Spam Using The Spam ELisp Package::
+* Filtering Spam Using Statistics with spam-stat::
+
+Filtering Spam Using The Spam ELisp Package
+
+* Spam ELisp Package Sequence of Events::
+* Spam ELisp Package Filtering of Incoming Mail::
+* Spam ELisp Package Global Variables::
+* Spam ELisp Package Configuration Examples::
+* Blacklists and Whitelists::
+* BBDB Whitelists::
+* Gmane Spam Reporting::
+* Anti-spam Hashcash Payments::
+* Blackholes::
+* Regular Expressions Header Matching::
+* Bogofilter::
+* SpamAssassin backend::
+* ifile spam filtering::
+* spam-stat spam filtering::
+* SpamOracle::
+* Extending the Spam ELisp package::
+
+Filtering Spam Using Statistics with spam-stat
+
+* Creating a spam-stat dictionary::
+* Splitting mail using spam-stat::
+* Low-level interface to the spam-stat dictionary::
+
+Appendices
+
+* XEmacs:: Requirements for installing under XEmacs.
+* History:: How Gnus got where it is today.
+* On Writing Manuals:: Why this is not a beginner's guide.
+* Terminology:: We use really difficult, like, words here.
+* Customization:: Tailoring Gnus to your needs.
+* Troubleshooting:: What you might try if things do not work.
+* Gnus Reference Guide:: Rilly, rilly technical stuff.
+* Emacs for Heathens:: A short introduction to Emacsian terms.
+* Frequently Asked Questions:: The Gnus FAQ
+
+History
+
+* Gnus Versions:: What Gnus versions have been released.
+* Other Gnus Versions:: Other Gnus versions that also have been released.
+* Why?:: What's the point of Gnus?
+* Compatibility:: Just how compatible is Gnus with @sc{gnus}?
+* Conformity:: Gnus tries to conform to all standards.
+* Emacsen:: Gnus can be run on a few modern Emacsen.
+* Gnus Development:: How Gnus is developed.
+* Contributors:: Oodles of people.
+* New Features:: Pointers to some of the new stuff in Gnus.
+
+New Features
+
+* ding Gnus:: New things in Gnus 5.0/5.1, the first new Gnus.
+* September Gnus:: The Thing Formally Known As Gnus 5.2/5.3.
+* Red Gnus:: Third time best---Gnus 5.4/5.5.
+* Quassia Gnus:: Two times two is four, or Gnus 5.6/5.7.
+* Pterodactyl Gnus:: Pentad also starts with P, AKA Gnus 5.8/5.9.
+* Oort Gnus:: It's big. It's far out. Gnus 5.10.
+* No Gnus:: Lars, FIXME!
+
+Customization
+
+* Slow/Expensive Connection:: You run a local Emacs and get the news elsewhere.
+* Slow Terminal Connection:: You run a remote Emacs.
+* Little Disk Space:: You feel that having large setup files is icky.
+* Slow Machine:: You feel like buying a faster machine.
+
+Gnus Reference Guide
+
+* Gnus Utility Functions:: Common functions and variable to use.
+* Back End Interface:: How Gnus communicates with the servers.
+* Score File Syntax:: A BNF definition of the score file standard.
+* Headers:: How Gnus stores headers internally.
+* Ranges:: A handy format for storing mucho numbers.
+* Group Info:: The group info format.
+* Extended Interactive:: Symbolic prefixes and stuff.
+* Emacs/XEmacs Code:: Gnus can be run under all modern Emacsen.
+* Various File Formats:: Formats of files that Gnus use.
+
+Back End Interface
+
+* Required Back End Functions:: Functions that must be implemented.
+* Optional Back End Functions:: Functions that need not be implemented.
+* Error Messaging:: How to get messages and report errors.
+* Writing New Back Ends:: Extending old back ends.
+* Hooking New Back Ends Into Gnus:: What has to be done on the Gnus end.
+* Mail-like Back Ends:: Some tips on mail back ends.
+
+Various File Formats
+
+* Active File Format:: Information on articles and groups available.
+* Newsgroups File Format:: Group descriptions.
+
+Emacs for Heathens
+
+* Keystrokes:: Entering text and executing commands.
+* Emacs Lisp:: The built-in Emacs programming language.
+
+@end detailmenu
@end menu
@node Starting Up
-@chapter Starting Gnus
+@chapter Starting gnus
@cindex starting up
@kindex M-x gnus
@findex gnus
-If your system administrator has set things up properly, starting Gnus
+If your system administrator has set things up properly, starting gnus
and reading news is extremely easy---you just type @kbd{M-x gnus} in
your Emacs.
@findex gnus-other-frame
@kindex M-x gnus-other-frame
-If you want to start Gnus in a different frame, you can use the command
+If you want to start gnus in a different frame, you can use the command
@kbd{M-x gnus-other-frame} instead.
If things do not go smoothly at startup, you have to twiddle some
-variables in your @file{~/.gnus} file. This file is similar to
-@file{~/.emacs}, but is read when gnus starts.
+variables in your @file{~/.gnus.el} file. This file is similar to
+@file{~/.emacs}, but is read when Gnus starts.
If you puzzle at any terms used in this manual, please refer to the
terminology section (@pxref{Terminology}).
@menu
-* Finding the News:: Choosing a method for getting news.
-* The First Time:: What does Gnus do the first time you start it?
-* The Server is Down:: How can I read my mail then?
-* Slave Gnusae:: You can have more than one Gnus active at a time.
-* Fetching a Group:: Starting Gnus just to read a group.
-* New Groups:: What is Gnus supposed to do with new groups?
-* Startup Files:: Those pesky startup files---@file{.newsrc}.
-* Auto Save:: Recovering from a crash.
-* The Active File:: Reading the active file over a slow line Takes Time.
-* Changing Servers:: You may want to move from one server to another.
-* Startup Variables:: Other variables you might change.
+* Finding the News:: Choosing a method for getting news.
+* The First Time:: What does Gnus do the first time you start it?
+* The Server is Down:: How can I read my mail then?
+* Slave Gnusae:: You can have more than one Gnus active at a time.
+* Fetching a Group:: Starting Gnus just to read a group.
+* New Groups:: What is Gnus supposed to do with new groups?
+* Changing Servers:: You may want to move from one server to another.
+* Startup Files:: Those pesky startup files---@file{.newsrc}.
+* Auto Save:: Recovering from a crash.
+* The Active File:: Reading the active file over a slow line Takes Time.
+* Startup Variables:: Other variables you might change.
@end menu
@vindex gnus-select-method
@c @head
-The @code{gnus-select-method} variable says where Gnus should look for
+The @code{gnus-select-method} variable says where gnus should look for
news. This variable should be a list where the first element says
@dfn{how} and the second element says @dfn{where}. This method is your
native method. All groups not fetched with this method are
foreign groups.
-For instance, if the @samp{news.somewhere.edu} @sc{nntp} server is where
+For instance, if the @samp{news.somewhere.edu} @acronym{NNTP} server is where
you want to get your daily dosage of news from, you'd say:
@lisp
@end lisp
If you can use a local spool, you probably should, as it will almost
-certainly be much faster.
+certainly be much faster. But do not use the local spool if your
+server is running Leafnode; in this case, use @code{(nntp "localhost")}.
@vindex gnus-nntpserver-file
@cindex NNTPSERVER
-@cindex @sc{nntp} server
-If this variable is not set, Gnus will take a look at the
-@code{NNTPSERVER} environment variable. If that variable isn't set,
-Gnus will see whether @code{gnus-nntpserver-file}
-(@file{/etc/nntpserver} by default) has any opinions on the matter. If
-that fails as well, Gnus will try to use the machine running Emacs as an @sc{nntp} server. That's a long shot, though.
+@cindex @acronym{NNTP} server
+If this variable is not set, gnus will take a look at the
+@env{NNTPSERVER} environment variable. If that variable isn't set,
+gnus will see whether @code{gnus-nntpserver-file}
+(@file{/etc/nntpserver} by default) has any opinions on the matter.
+If that fails as well, gnus will try to use the machine running Emacs
+as an @acronym{NNTP} server. That's a long shot, though.
@vindex gnus-nntp-server
If @code{gnus-nntp-server} is set, this variable will override
@vindex gnus-secondary-servers
@vindex gnus-nntp-server
-You can also make Gnus prompt you interactively for the name of an
-@sc{nntp} server. If you give a non-numerical prefix to @code{gnus}
-(i.e., @kbd{C-u M-x gnus}), Gnus will let you choose between the servers
+You can also make gnus prompt you interactively for the name of an
+@acronym{NNTP} server. If you give a non-numerical prefix to @code{gnus}
+(i.e., @kbd{C-u M-x gnus}), gnus will let you choose between the servers
in the @code{gnus-secondary-servers} list (if any). You can also just
type in the name of any server you feel like visiting. (Note that this
will set @code{gnus-nntp-server}, which means that if you then @kbd{M-x
@findex gnus-group-browse-foreign-server
@kindex B (Group)
-However, if you use one @sc{nntp} server regularly and are just
+However, if you use one @acronym{NNTP} server regularly and are just
interested in a couple of groups from a different server, you would be
better served by using the @kbd{B} command in the group buffer. It will
let you have a look at what groups are available, and you can subscribe
appear on these servers will be subscribed (or not) just as native
groups are.
-For instance, if you use the @code{nnmbox} backend to read your mail, you
-would typically set this variable to
+For instance, if you use the @code{nnmbox} back end to read your mail,
+you would typically set this variable to
@lisp
(setq gnus-secondary-select-methods '((nnmbox "")))
@section The First Time
@cindex first time usage
-If no startup files exist, Gnus will try to determine what groups should
+If no startup files exist, gnus will try to determine what groups should
be subscribed by default.
@vindex gnus-default-subscribed-newsgroups
-If the variable @code{gnus-default-subscribed-newsgroups} is set, Gnus
+If the variable @code{gnus-default-subscribed-newsgroups} is set, gnus
will subscribe you to just those groups in that list, leaving the rest
killed. Your system administrator should have set this variable to
something useful.
-Since she hasn't, Gnus will just subscribe you to a few arbitrarily
+Since she hasn't, gnus will just subscribe you to a few arbitrarily
picked groups (i.e., @samp{*.newusers}). (@dfn{Arbitrary} is defined
here as @dfn{whatever Lars thinks you should read}.)
-You'll also be subscribed to the Gnus documentation group, which should
+You'll also be subscribed to the gnus documentation group, which should
help you with most common problems.
-If @code{gnus-default-subscribed-newsgroups} is @code{t}, Gnus will just
+If @code{gnus-default-subscribed-newsgroups} is @code{t}, gnus will just
use the normal functions for handling new groups, and not do anything
special.
@section The Server is Down
@cindex server errors
-If the default server is down, Gnus will understandably have some
+If the default server is down, gnus will understandably have some
problems starting. However, if you have some mail groups in addition to
-the news groups, you may want to start Gnus anyway.
+the news groups, you may want to start gnus anyway.
Gnus, being the trusting sort of program, will ask whether to proceed
without a native select method if that server can't be contacted. This
@c @head
If you know that the server is definitely down, or you just want to read
your mail without bothering with the server at all, you can use the
-@code{gnus-no-server} command to start Gnus. That might come in handy
+@code{gnus-no-server} command to start gnus. That might come in handy
if you're in a hurry as well. This command will not attempt to contact
your primary server---instead, it will just activate all groups on level
1 and 2. (You should preferably keep no native groups on those two
-levels.)
+levels.) Also @pxref{Group Levels}.
@node Slave Gnusae
@section Slave Gnusae
@cindex slave
-You might want to run more than one Emacs with more than one Gnus at the
+You might want to run more than one Emacs with more than one gnus at the
same time. If you are using different @file{.newsrc} files (e.g., if you
-are using the two different Gnusae to read from two different servers),
+are using the two different gnusae to read from two different servers),
that is no problem whatsoever. You just do it.
The problem appears when you want to run two Gnusae that use the same
-@code{.newsrc} file.
+@file{.newsrc} file.
-To work around that problem some, we here at the Think-Tank at the Gnus
+To work around that problem some, we here at the Think-Tank at the gnus
Towers have come up with a new concept: @dfn{Masters} and
@dfn{slaves}. (We have applied for a patent on this concept, and have
taken out a copyright on those words. If you wish to use those words in
me. Usage of the patent (@dfn{Master/Slave Relationships In Computer
Applications}) will be much more expensive, of course.)
-Anyways, you start one Gnus up the normal way with @kbd{M-x gnus} (or
-however you do it). Each subsequent slave Gnusae should be started with
+@findex gnus-slave
+Anyway, you start one gnus up the normal way with @kbd{M-x gnus} (or
+however you do it). Each subsequent slave gnusae should be started with
@kbd{M-x gnus-slave}. These slaves won't save normal @file{.newsrc}
files, but instead save @dfn{slave files} that contain information only
-on what groups have been read in the slave session. When a master Gnus
+on what groups have been read in the slave session. When a master gnus
starts, it will read (and delete) these slave files, incorporating all
information from them. (The slave files will be read in the sequence
they were created, so the latest changes will have precedence.)
Information from the slave files has, of course, precedence over the
-information in the normal (i.e., master) @code{.newsrc} file.
+information in the normal (i.e., master) @file{.newsrc} file.
+If the @file{.newsrc*} files have not been saved in the master when the
+slave starts, you may be prompted as to whether to read an auto-save
+file. If you answer ``yes'', the unsaved changes to the master will be
+incorporated into the slave. If you answer ``no'', the slave may see some
+messages as unread that have been read in the master.
@node Fetching a Group
@section Fetching a Group
@findex gnus-fetch-group
It is sometimes convenient to be able to just say ``I want to read this
-group and I don't care whether Gnus has been started or not''. This is
+group and I don't care whether gnus has been started or not''. This is
perhaps more useful for people who write code than for users, but the
command @code{gnus-fetch-group} provides this functionality in any case.
It takes the group name as a parameter.
@code{nil}, you can always subscribe to the new groups just by pressing
@kbd{U} in the group buffer (@pxref{Group Maintenance}). This variable
is @code{ask-server} by default. If you set this variable to
-@code{always}, then Gnus will query the backends for new groups even
+@code{always}, then Gnus will query the back ends for new groups even
when you do the @kbd{g} command (@pxref{Scanning New Messages}).
@menu
-* Checking New Groups:: Determining what groups are new.
-* Subscription Methods:: What Gnus should do with new groups.
-* Filtering New Groups:: Making Gnus ignore certain new groups.
+* Checking New Groups:: Determining what groups are new.
+* Subscription Methods:: What Gnus should do with new groups.
+* Filtering New Groups:: Making Gnus ignore certain new groups.
@end menu
Gnus normally determines whether a group is new or not by comparing the
list of groups from the active file(s) with the lists of subscribed and
dead groups. This isn't a particularly fast method. If
-@code{gnus-check-new-newsgroups} is @code{ask-server}, Gnus will ask the
+@code{gnus-check-new-newsgroups} is @code{ask-server}, gnus will ask the
server for new groups since the last time. This is both faster and
cheaper. This also means that you can get rid of the list of killed
groups altogether, so you may set @code{gnus-save-killed-list} to
fail-safe answer. I would suggest just setting this variable to
@code{ask-server} and see whether any new groups appear within the next
few days. If any do, then it works. If none do, then it doesn't
-work. I could write a function to make Gnus guess whether the server
+work. I could write a function to make gnus guess whether the server
supports @code{ask-server}, but it would just be a guess. So I won't.
You could @code{telnet} to the server and say @code{HELP} and see
whether it lists @samp{NEWGROUPS} among the commands it understands. If
it does, then it might work. (But there are servers that lists
@samp{NEWGROUPS} without supporting the function properly.)
-This variable can also be a list of select methods. If so, Gnus will
+This variable can also be a list of select methods. If so, gnus will
issue an @code{ask-server} command to each of the select methods, and
subscribe them (or not) using the normal methods. This might be handy
if you are monitoring a few servers for new groups. A side effect is
@subsection Subscription Methods
@vindex gnus-subscribe-newsgroup-method
-What Gnus does when it encounters a new group is determined by the
+What gnus does when it encounters a new group is determined by the
@code{gnus-subscribe-newsgroup-method} variable.
This variable should contain a function. This function will be called
Subscribe all new groups hierarchically. The difference between this
function and @code{gnus-subscribe-alphabetically} is slight.
@code{gnus-subscribe-alphabetically} will subscribe new groups in a strictly
-alphabetical fashion, while this function will enter groups into it's
+alphabetical fashion, while this function will enter groups into its
hierarchy. So if you want to have the @samp{rec} hierarchy before the
@samp{comp} hierarchy, this function will not mess that configuration
up. Or something like that.
@item gnus-subscribe-interactively
@vindex gnus-subscribe-interactively
-Subscribe new groups interactively. This means that Gnus will ask
+Subscribe new groups interactively. This means that gnus will ask
you about @strong{all} new groups. The groups you choose to subscribe
to will be subscribed hierarchically.
@vindex gnus-subscribe-killed
Kill all new groups.
+@item gnus-subscribe-topics
+@vindex gnus-subscribe-topics
+Put the groups into the topic that has a matching @code{subscribe} topic
+parameter (@pxref{Topic Parameters}). For instance, a @code{subscribe}
+topic parameter that looks like
+
+@example
+"nnslashdot"
+@end example
+
+will mean that all groups that match that regex will be subscribed under
+that topic.
+
+If no topics match the groups, the groups will be subscribed in the
+top-level topic.
+
@end table
@vindex gnus-subscribe-hierarchical-interactive
A closely related variable is
@code{gnus-subscribe-hierarchical-interactive}. (That's quite a
-mouthful.) If this variable is non-@code{nil}, Gnus will ask you in a
+mouthful.) If this variable is non-@code{nil}, gnus will ask you in a
hierarchical fashion whether to subscribe to new groups or not. Gnus
will ask you for each sub-hierarchy whether you want to descend the
hierarchy or not.
@vindex gnus-auto-subscribed-groups
Yet another variable that meddles here is
@code{gnus-auto-subscribed-groups}. It works exactly like
-@code{gnus-options-subscribe}, and is therefore really superfluous, but I
-thought it would be nice to have two of these. This variable is more
-meant for setting some ground rules, while the other variable is used
-more for user fiddling. By default this variable makes all new groups
-that come from mail backends (@code{nnml}, @code{nnbabyl},
-@code{nnfolder}, @code{nnmbox}, and @code{nnmh}) subscribed. If you
-don't like that, just set this variable to @code{nil}.
+@code{gnus-options-subscribe}, and is therefore really superfluous,
+but I thought it would be nice to have two of these. This variable is
+more meant for setting some ground rules, while the other variable is
+used more for user fiddling. By default this variable makes all new
+groups that come from mail back ends (@code{nnml}, @code{nnbabyl},
+@code{nnfolder}, @code{nnmbox}, @code{nnmh}, and @code{nnmaildir})
+subscribed. If you don't like that, just set this variable to
+@code{nil}.
New groups that match this regexp are subscribed using
@code{gnus-subscribe-options-newsgroup-method}.
@section Changing Servers
@cindex changing servers
-Sometimes it is necessary to move from one @sc{nntp} server to another.
+Sometimes it is necessary to move from one @acronym{NNTP} server to another.
This happens very rarely, but perhaps you change jobs, or one server is
very flaky and you want to use another.
@emph{Wrong!}
Article numbers are not (in any way) kept synchronized between different
-@sc{nntp} servers, and the only way Gnus keeps track of what articles
+@acronym{NNTP} servers, and the only way Gnus keeps track of what articles
you have read is by keeping track of article numbers. So when you
change @code{gnus-select-method}, your @file{.newsrc} file becomes
worthless.
gnus-group-clear-data-on-native-groups} command to clear out all data
that you have on your native groups. Use with caution.
+@kindex M-x gnus-group-clear-data
+@findex gnus-group-clear-data
+Clear the data from the current group only---nix out marks and the
+list of read articles (@code{gnus-group-clear-data}).
+
After changing servers, you @strong{must} move the cache hierarchy away,
since the cached articles will have wrong article numbers, which will
affect which articles Gnus thinks are read.
+@code{gnus-group-clear-data-on-native-groups} will ask you if you want
+to have it done automatically; for @code{gnus-group-clear-data}, you
+can use @kbd{M-x gnus-cache-move-cache} (but beware, it will move the
+cache for all groups).
@node Startup Files
not stored in the @file{.newsrc} file.
@vindex gnus-save-newsrc-file
+@vindex gnus-read-newsrc-file
You can turn off writing the @file{.newsrc} file by setting
@code{gnus-save-newsrc-file} to @code{nil}, which means you can delete
-the file and save some space, as well as exiting from Gnus faster.
+the file and save some space, as well as exiting from gnus faster.
However, this will make it impossible to use other newsreaders than
-Gnus. But hey, who would want to, right?
+gnus. But hey, who would want to, right? Similarly, setting
+@code{gnus-read-newsrc-file} to @code{nil} makes gnus ignore the
+@file{.newsrc} file and any @file{.newsrc-SERVER} files, which is
+convenient if you have a tendency to use Netscape once in a while.
@vindex gnus-save-killed-list
If @code{gnus-save-killed-list} (default @code{t}) is @code{nil}, Gnus
several servers where not all servers support @code{ask-server}.
@vindex gnus-startup-file
+@vindex gnus-backup-startup-file
+@vindex version-control
The @code{gnus-startup-file} variable says where the startup files are.
The default value is @file{~/.newsrc}, with the Gnus (El Dingo) startup
file being whatever that one is, with a @samp{.eld} appended.
+If you want version control for this file, set
+@code{gnus-backup-startup-file}. It respects the same values as the
+@code{version-control} variable.
@vindex gnus-save-newsrc-hook
@vindex gnus-save-quick-newsrc-hook
@end lisp
@vindex gnus-init-file
-When Gnus starts, it will read the @code{gnus-site-init-file}
+@vindex gnus-site-init-file
+When gnus starts, it will read the @code{gnus-site-init-file}
(@file{.../site-lisp/gnus} by default) and @code{gnus-init-file}
(@file{~/.gnus} by default) files. These are normal Emacs Lisp files
and can be used to avoid cluttering your @file{~/.emacs} and
-@file{site-init} files with Gnus stuff. Gnus will also check for files
+@file{site-init} files with gnus stuff. Gnus will also check for files
with the same names as these, but with @file{.elc} and @file{.el}
suffixes. In other words, if you have set @code{gnus-init-file} to
@file{~/.gnus}, it will look for @file{~/.gnus.elc}, @file{~/.gnus.el},
@cindex dribble file
@cindex auto-save
-Whenever you do something that changes the Gnus data (reading articles,
+Whenever you do something that changes the gnus data (reading articles,
catching up, killing/subscribing groups), the change is added to a
special @dfn{dribble buffer}. This buffer is auto-saved the normal
Emacs way. If your Emacs should crash before you have saved the
@file{.newsrc} files, all changes you have made can be recovered from
this file.
-If Gnus detects this file at startup, it will ask the user whether to
+If gnus detects this file at startup, it will ask the user whether to
read it. The auto save file is deleted whenever the real startup file is
saved.
@vindex gnus-use-dribble-file
-If @code{gnus-use-dribble-file} is @code{nil}, Gnus won't create and
+If @code{gnus-use-dribble-file} is @code{nil}, gnus won't create and
maintain a dribble buffer. The default is @code{t}.
@vindex gnus-dribble-directory
Gnus will put the dribble file(s) in @code{gnus-dribble-directory}. If
-this variable is @code{nil}, which it is by default, Gnus will dribble
+this variable is @code{nil}, which it is by default, gnus will dribble
into the directory where the @file{.newsrc} file is located. (This is
normally the user's home directory.) The dribble file will get the same
-file permissions as the @code{.newsrc} file.
+file permissions as the @file{.newsrc} file.
@vindex gnus-always-read-dribble-file
If @code{gnus-always-read-dribble-file} is non-@code{nil}, Gnus will
@cindex active file
@cindex ignored groups
-When Gnus starts, or indeed whenever it tries to determine whether new
+When gnus starts, or indeed whenever it tries to determine whether new
articles have arrived, it reads the active file. This is a very large
file that lists all the active groups and articles on the server.
@vindex gnus-ignored-newsgroups
-Before examining the active file, Gnus deletes all lines that match the
+Before examining the active file, gnus deletes all lines that match the
regexp @code{gnus-ignored-newsgroups}. This is done primarily to reject
-any groups with bogus names, but you can use this variable to make Gnus
+any groups with bogus names, but you can use this variable to make gnus
ignore hierarchies you aren't ever interested in. However, this is not
recommended. In fact, it's highly discouraged. Instead, @pxref{New
Groups} for an overview of other variables that can be used instead.
@vindex gnus-read-active-file
@c @head
The active file can be rather Huge, so if you have a slow network, you
-can set @code{gnus-read-active-file} to @code{nil} to prevent Gnus from
+can set @code{gnus-read-active-file} to @code{nil} to prevent gnus from
reading the active file. This variable is @code{some} by default.
Gnus will try to make do by getting information just on the groups that
you actually subscribe to.
Note that if you subscribe to lots and lots of groups, setting this
-variable to @code{nil} will probably make Gnus slower, not faster. At
-present, having this variable @code{nil} will slow Gnus down
+variable to @code{nil} will probably make gnus slower, not faster. At
+present, having this variable @code{nil} will slow gnus down
considerably, unless you read news over a 2400 baud modem.
This variable can also have the value @code{some}. Gnus will then
at all. In any case, @code{some} should be faster than @code{nil}, and
is certainly faster than @code{t} over slow lines.
-If this variable is @code{nil}, Gnus will ask for group info in total
+Some news servers (old versions of Leafnode and old versions of INN, for
+instance) do not support the @code{LIST ACTIVE group}. For these
+servers, @code{nil} is probably the most efficient value for this
+variable.
+
+If this variable is @code{nil}, gnus will ask for group info in total
lock-step, which isn't very fast. If it is @code{some} and you use an
-@sc{nntp} server, Gnus will pump out commands as fast as it can, and
+@acronym{NNTP} server, gnus will pump out commands as fast as it can, and
read all the replies in one swoop. This will normally result in better
performance, but if the server does not support the aforementioned
@code{LIST ACTIVE group} command, this isn't very nice to the server.
+If you think that starting up Gnus takes too long, try all the three
+different values for this variable and see what works best for you.
+
In any case, if you use @code{some} or @code{nil}, you should definitely
kill all groups that you aren't interested in to speed things up.
@item gnus-load-hook
@vindex gnus-load-hook
-A hook run while Gnus is being loaded. Note that this hook will
+A hook run while gnus is being loaded. Note that this hook will
normally be run just once in each Emacs session, no matter how many
-times you start Gnus.
+times you start gnus.
@item gnus-before-startup-hook
@vindex gnus-before-startup-hook
-A hook run after starting up Gnus successfully.
+A hook run after starting up gnus successfully.
@item gnus-startup-hook
@vindex gnus-startup-hook
-A hook run as the very last thing after starting up Gnus
+A hook run as the very last thing after starting up gnus
@item gnus-started-hook
@vindex gnus-started-hook
-A hook that is run as the very last thing after starting up Gnus
+A hook that is run as the very last thing after starting up gnus
successfully.
-@item gnus-started-hook
-@vindex gnus-started-hook
+@item gnus-setup-news-hook
+@vindex gnus-setup-news-hook
A hook that is run after reading the @file{.newsrc} file(s), but before
generating the group buffer.
@item gnus-check-bogus-newsgroups
@vindex gnus-check-bogus-newsgroups
-If non-@code{nil}, Gnus will check for and delete all bogus groups at
+If non-@code{nil}, gnus will check for and delete all bogus groups at
startup. A @dfn{bogus group} is a group that you have in your
@file{.newsrc} file, but doesn't exist on the news server. Checking for
bogus groups can take quite a while, so to save time and resources it's
If non-@code{nil}, the startup message won't be displayed. That way,
your boss might not notice as easily that you are reading news instead
of doing your job. Note that this variable is used before
-@file{.gnus.el} is loaded, so it should be set in @code{.emacs} instead.
+@file{~/.gnus.el} is loaded, so it should be set in @file{.emacs} instead.
@item gnus-no-groups-message
@vindex gnus-no-groups-message
-Message displayed by Gnus when no groups are available.
+Message displayed by gnus when no groups are available.
@item gnus-play-startup-jingle
@vindex gnus-play-startup-jingle
-If non-@code{nil}, play the Gnus jingle at startup.
+If non-@code{nil}, play the gnus jingle at startup.
@item gnus-startup-jingle
@vindex gnus-startup-jingle
@end table
-@node The Group Buffer
-@chapter The Group Buffer
+@node Group Buffer
+@chapter Group Buffer
@cindex group buffer
+@c Alex Schroeder suggests to rearrange this as follows:
+@c
+@c <kensanata> ok, just save it for reference. I'll go to bed in a minute.
+@c 1. Selecting a Group, 2. (new) Finding a Group, 3. Group Levels,
+@c 4. Subscription Commands, 5. Group Maneuvering, 6. Group Data,
+@c 7. Group Score, 8. Group Buffer Format
+@c <kensanata> Group Levels should have more information on levels 5 to 9. I
+@c suggest to split the 4th paragraph ("Gnus considers groups...") as follows:
+@c <kensanata> First, "Gnus considers groups... (default 9)."
+@c <kensanata> New, a table summarizing what levels 1 to 9 mean.
+@c <kensanata> Third, "Gnus treats subscribed ... reasons of efficiency"
+@c <kensanata> Then expand the next paragraph or add some more to it.
+@c This short one sentence explains levels 1 and 2, therefore I understand
+@c that I should keep important news at 3 and boring news at 4.
+@c Say so! Then go on to explain why I should bother with levels 6 to 9.
+@c Maybe keep those that you don't want to read temporarily at 6,
+@c those that you never want to read at 8, those that offend your
+@c human rights at 9...
+
+
The @dfn{group buffer} lists all (or parts) of the available groups. It
-is the first buffer shown when Gnus starts, and will never be killed as
-long as Gnus is active.
+is the first buffer shown when gnus starts, and will never be killed as
+long as gnus is active.
@iftex
@iflatex
\gnusfigure{The Group Buffer}{320}{
-\put(75,50){\epsfig{figure=tmp/group.ps,height=9cm}}
+\put(75,50){\epsfig{figure=ps/group,height=9cm}}
\put(120,37){\makebox(0,0)[t]{Buffer name}}
\put(120,38){\vector(1,2){10}}
\put(40,60){\makebox(0,0)[r]{Mode line}}
@end iftex
@menu
-* Group Buffer Format:: Information listed and how you can change it.
-* Group Maneuvering:: Commands for moving in the group buffer.
-* Selecting a Group:: Actually reading news.
-* Group Data:: Changing the info for a group.
-* Subscription Commands:: Unsubscribing, killing, subscribing.
-* Group Levels:: Levels? What are those, then?
-* Group Score:: A mechanism for finding out what groups you like.
-* Marking Groups:: You can mark groups for later processing.
-* Foreign Groups:: Creating and editing groups.
-* Group Parameters:: Each group may have different parameters set.
-* Listing Groups:: Gnus can list various subsets of the groups.
-* Sorting Groups:: Re-arrange the group order.
-* Group Maintenance:: Maintaining a tidy @file{.newsrc} file.
-* Browse Foreign Server:: You can browse a server. See what it has to offer.
-* Exiting Gnus:: Stop reading news and get some work done.
-* Group Topics:: A folding group mode divided into topics.
-* Misc Group Stuff:: Other stuff that you can to do.
+* Group Buffer Format:: Information listed and how you can change it.
+* Group Maneuvering:: Commands for moving in the group buffer.
+* Selecting a Group:: Actually reading news.
+* Subscription Commands:: Unsubscribing, killing, subscribing.
+* Group Data:: Changing the info for a group.
+* Group Levels:: Levels? What are those, then?
+* Group Score:: A mechanism for finding out what groups you like.
+* Marking Groups:: You can mark groups for later processing.
+* Foreign Groups:: Creating and editing groups.
+* Group Parameters:: Each group may have different parameters set.
+* Listing Groups:: Gnus can list various subsets of the groups.
+* Sorting Groups:: Re-arrange the group order.
+* Group Maintenance:: Maintaining a tidy @file{.newsrc} file.
+* Browse Foreign Server:: You can browse a server. See what it has to offer.
+* Exiting Gnus:: Stop reading news and get some work done.
+* Group Topics:: A folding group mode divided into topics.
+* Misc Group Stuff:: Other stuff that you can to do.
@end menu
@section Group Buffer Format
@menu
-* Group Line Specification:: Deciding how the group buffer is to look.
-* Group Modeline Specification:: The group buffer modeline.
-* Group Highlighting:: Having nice colors in the group buffer.
+* Group Line Specification:: Deciding how the group buffer is to look.
+* Group Mode Line Specification:: The group buffer mode line.
+* Group Highlighting:: Having nice colors in the group buffer.
@end menu
a @code{printf} specifications, for those of you who use (feh!) C.
@xref{Formatting Variables}.
-@samp{%M%S%5y: %(%g%)\n} is the value that produced those lines above.
+@samp{%M%S%5y:%B%(%g%)\n} is the value that produced those lines above.
There should always be a colon on the line; the cursor always moves to
-the colon after performing an operation. Nothing else is required---not
-even the group name. All displayed text is just window dressing, and is
-never examined by Gnus. Gnus stores all real information it needs using
-text properties.
+the colon after performing an operation. @xref{Positioning
+Point}. Nothing else is required---not even the group name. All
+displayed text is just window dressing, and is never examined by Gnus.
+Gnus stores all real information it needs using text properties.
(Note that if you make a really strange, wonderful, spreadsheet-like
layout, everybody will believe you are hard at work with the accounting
@item R
Number of read articles.
+@item U
+Number of unseen articles.
+
@item t
Estimated total number of articles. (This is really @var{max-number}
minus @var{min-number} plus 1.)
+Gnus uses this estimation because the @acronym{NNTP} protocol provides
+efficient access to @var{max-number} and @var{min-number} but getting
+the true unread message count is not possible efficiently. For
+hysterical raisins, even the mail back ends, where the true number of
+unread messages might be available efficiently, use the same limited
+interface. To remove this restriction from Gnus means that the back
+end interface has to be changed, which is not an easy job. If you
+want to work on this, please contact the Gnus mailing list.
+
@item y
Number of unread, unticked, non-dormant articles.
@item G
Group name.
+@item C
+Group comment (@pxref{Group Parameters}) or group name if there is no
+comment element in the group parameters.
+
@item D
-Newsgroup description.
+Newsgroup description. You need to read the group descriptions
+before these will appear, and to do that, you either have to set
+@code{gnus-read-active-file} or use the group buffer @kbd{M-d}
+command.
@item o
@samp{m} if moderated.
@item s
Select method.
+@item B
+If the summary buffer for the group is open or not.
+
@item n
Select from where.
Short (collapsed) group name. The @code{gnus-group-uncollapsed-levels}
variable says how many levels to leave at the end of the group name.
The default is 1---this will mean that group names like
-@samp{gnu.emacs.gnus} will be shortened to @samp{g.emacs.gnus}.
+@samp{gnu.emacs.gnus} will be shortened to @samp{g.e.gnus}.
@item m
@vindex gnus-new-mail-mark
@samp{%} (@code{gnus-new-mail-mark}) if there has arrived new mail to
the group lately.
+@item p
+@samp{#} (@code{gnus-process-mark}) if the group is process marked.
+
@item d
A string that says when you last read the group (@pxref{Group
Timestamp}).
+@item F
+The disk space used by the articles fetched by both the cache and
+agent. The value is automatically scaled to bytes(B), kilobytes(K),
+megabytes(M), or gigabytes(G) to minimize the column width. A format
+of %7F is sufficient for a fixed-width column.
+
@item u
User defined specifier. The next character in the format string should
be a letter. Gnus will call the function
group, or a bogus native group.
-@node Group Modeline Specification
-@subsection Group Modeline Specification
-@cindex group modeline
+@node Group Mode Line Specification
+@subsection Group Mode Line Specification
+@cindex group mode line
@vindex gnus-group-mode-line-format
The mode line can be changed by setting
@vindex gnus-group-highlight
Highlighting in the group buffer is controlled by the
@code{gnus-group-highlight} variable. This is an alist with elements
-that look like @var{(form . face)}. If @var{form} evaluates to
+that look like @code{(@var{form} . @var{face})}. If @var{form} evaluates to
something non-@code{nil}, the @var{face} will be used on the line.
Here's an example value for this variable that might look nice if the
background is dark:
@lisp
-(face-spec-set 'my-group-face-1
- '((t (:foreground "Red" :bold t))))
-(face-spec-set 'my-group-face-2
- '((t (:foreground "SeaGreen" :bold t))))
-(face-spec-set 'my-group-face-3
- '((t (:foreground "SpringGreen" :bold t))))
-(face-spec-set 'my-group-face-4
- '((t (:foreground "SteelBlue" :bold t))))
-(face-spec-set 'my-group-face-5
- '((t (:foreground "SkyBlue" :bold t))))
+(cond (window-system
+ (setq custom-background-mode 'light)
+ (defface my-group-face-1
+ '((t (:foreground "Red" :bold t))) "First group face")
+ (defface my-group-face-2
+ '((t (:foreground "DarkSeaGreen4" :bold t)))
+ "Second group face")
+ (defface my-group-face-3
+ '((t (:foreground "Green4" :bold t))) "Third group face")
+ (defface my-group-face-4
+ '((t (:foreground "SteelBlue" :bold t))) "Fourth group face")
+ (defface my-group-face-5
+ '((t (:foreground "Blue" :bold t))) "Fifth group face")))
(setq gnus-group-highlight
'(((> unread 200) . my-group-face-1)
@item ticked
The number of ticked articles in the group.
@item total
-The total number of articles in the group. Or rather, MAX-NUMBER minus
-MIN-NUMBER plus one.
+The total number of articles in the group. Or rather,
+@var{max-number} minus @var{min-number} plus one.
@item topic
When using the topic minor mode, this variable is bound to the current
topic being inserted.
@end table
When the forms are @code{eval}ed, point is at the beginning of the line
-of the group in question, so you can use many of the normal Gnus
+of the group in question, so you can use many of the normal gnus
functions for snarfing info on the group.
@vindex gnus-group-update-hook
Select the current group, switch to the summary buffer and display the
first unread article (@code{gnus-group-read-group}). If there are no
unread articles in the group, or if you give a non-numerical prefix to
-this command, Gnus will offer to fetch all the old articles in this
-group from the server. If you give a numerical prefix @var{N}, @var{N}
-determines the number of articles Gnus will fetch. If @var{N} is
-positive, Gnus fetches the @var{N} newest articles, if @var{N} is
-negative, Gnus fetches the @var{abs(N)} oldest articles.
+this command, gnus will offer to fetch all the old articles in this
+group from the server. If you give a numerical prefix @var{n}, @var{n}
+determines the number of articles Gnus will fetch. If @var{n} is
+positive, Gnus fetches the @var{n} newest articles, if @var{n} is
+negative, Gnus fetches the @code{abs(@var{n})} oldest articles.
+
+Thus, @kbd{SPC} enters the group normally, @kbd{C-u SPC} offers old
+articles, @kbd{C-u 4 2 SPC} fetches the 42 newest articles, and @kbd{C-u
+- 4 2 SPC} fetches the 42 oldest ones.
+
+When you are in the group (in the Summary buffer), you can type
+@kbd{M-g} to fetch new articles, or @kbd{C-u M-g} to also show the old
+ones.
@item RET
@kindex RET (Group)
scoring/killing will be performed, there will be no highlights and no
expunging. This might be useful if you're in a real hurry and have to
enter some humongous group. If you give a 0 prefix to this command
-(i.e., @kbd{0 M-RET}), Gnus won't even generate the summary buffer,
+(i.e., @kbd{0 M-RET}), gnus won't even generate the summary buffer,
which is useful if you want to toggle threading before generating the
summary buffer (@pxref{Summary Generation Commands}).
command, but this one does it without expunging and hiding dormants
(@code{gnus-group-visible-select-group}).
-@item M-C-RET
-@kindex M-C-RET (Group)
+@item C-M-RET
+@kindex C-M-RET (Group)
@findex gnus-group-select-group-ephemerally
Finally, this command selects the current group ephemerally without
doing any processing of its contents
@end table
@vindex gnus-large-newsgroup
-The @code{gnus-large-newsgroup} variable says what Gnus should consider
-to be a big group. This is 200 by default. If the group has more
-(unread and/or ticked) articles than this, Gnus will query the user
-before entering the group. The user can then specify how many articles
-should be fetched from the server. If the user specifies a negative
-number (@code{-n}), the @code{n} oldest articles will be fetched. If it
-is positive, the @code{n} articles that have arrived most recently will
-be fetched.
+The @code{gnus-large-newsgroup} variable says what Gnus should
+consider to be a big group. If it is @code{nil}, no groups are
+considered big. The default value is 200. If the group has more
+(unread and/or ticked) articles than this, gnus will query the user
+before entering the group. The user can then specify how many
+articles should be fetched from the server. If the user specifies a
+negative number (@var{-n}), the @var{n} oldest articles will be
+fetched. If it is positive, the @var{n} articles that have arrived
+most recently will be fetched.
+
+@vindex gnus-large-ephemeral-newsgroup
+@code{gnus-large-ephemeral-newsgroup} is the same as
+@code{gnus-large-newsgroup}, but is only used for ephemeral
+newsgroups.
@vindex gnus-select-group-hook
@vindex gnus-auto-select-first
-@code{gnus-auto-select-first} control whether any articles are selected
+@vindex gnus-auto-select-subject
+If @code{gnus-auto-select-first} is non-@code{nil}, select an article
automatically when entering a group with the @kbd{SPACE} command.
+Which article this is is controlled by the
+@code{gnus-auto-select-subject} variable. Valid values for this
+variable is:
@table @code
-@item nil
-Don't select any articles when entering the group. Just display the
-full summary buffer.
-
-@item t
-Select the first unread article when entering the group.
-
-@item best
-Select the highest scored article in the group when entering the
-group.
+@item unread
+Place point on the subject line of the first unread article.
-@end table
+@item first
+Place point on the subject line of the first article.
-This variable can also be a function. In that case, that function will
-be called to place point on a subject line, and/or select some article.
-Useful functions include:
+@item unseen
+Place point on the subject line of the first unseen article.
-@table @code
-@item gnus-summary-first-unread-subject
-Place point on the subject line of the first unread article, but
-don't select the article.
+@item unseen-or-unread
+Place point on the subject line of the first unseen article, and if
+there is no such article, place point on the subject line of the first
+unread article.
-@item gnus-summary-first-unread-article
-Select the first unread article.
+@item best
+Place point on the subject line of the highest-scored unread article.
-@item gnus-summary-best-unread-article
-Select the highest-scored unread article.
@end table
+This variable can also be a function. In that case, that function
+will be called to place point on a subject line.
If you want to prevent automatic selection in some group (say, in a
-binary group with Huge articles) you can set this variable to @code{nil}
-in @code{gnus-select-group-hook}, which is called when a group is
+binary group with Huge articles) you can set the
+@code{gnus-auto-select-first} variable to @code{nil} in
+@code{gnus-select-group-hook}, which is called when a group is
selected.
@item M-x gnus-group-clear-data-on-native-groups
@kindex M-x gnus-group-clear-data-on-native-groups
@findex gnus-group-clear-data-on-native-groups
-If you have switched from one @sc{nntp} server to another, all your marks
+If you have switched from one @acronym{NNTP} server to another, all your marks
and read ranges have become worthless. You can use this command to
clear out all data that you have on your native groups. Use with
caution.
All groups have a level of @dfn{subscribedness}. For instance, if a
group is on level 2, it is more subscribed than a group on level 5. You
-can ask Gnus to just list groups on a given level or lower
+can ask gnus to just list groups on a given level or lower
(@pxref{Listing Groups}), or to just check for new articles in groups on
a given level or lower (@pxref{Scanning New Messages}).
It is recommended that you keep all your mail groups (if any) on quite
low levels (e.g. 1 or 2).
+Maybe the following description of the default behavior of Gnus helps to
+understand what these levels are all about. By default, Gnus shows you
+subscribed nonempty groups, but by hitting @kbd{L} you can have it show
+empty subscribed groups and unsubscribed groups, too. Type @kbd{l} to
+go back to showing nonempty subscribed groups again. Thus, unsubscribed
+groups are hidden, in a way.
+
+Zombie and killed groups are similar to unsubscribed groups in that they
+are hidden by default. But they are different from subscribed and
+unsubscribed groups in that Gnus doesn't ask the news server for
+information (number of messages, number of unread messages) on zombie
+and killed groups. Normally, you use @kbd{C-k} to kill the groups you
+aren't interested in. If most groups are killed, Gnus is faster.
+
+Why does Gnus distinguish between zombie and killed groups? Well, when
+a new group arrives on the server, Gnus by default makes it a zombie
+group. This means that you are normally not bothered with new groups,
+but you can type @kbd{A z} to get a list of all new groups. Subscribe
+the ones you like and kill the ones you don't want. (@kbd{A k} shows a
+list of killed groups.)
+
If you want to play with the level variables, you should show some care.
Set them once, and don't touch them ever again. Better yet, don't touch
them at all unless you know exactly what you're doing.
handy if you want to read the most important groups before you read the
rest.
+If this variable is @code{best}, Gnus will make the next newsgroup the
+one with the best level.
+
@vindex gnus-group-default-list-level
All groups with a level less than or equal to
@code{gnus-group-default-list-level} will be listed in the group buffer
group buffer according to how often you read groups, perhaps? Within
reason?
-This is what @dfn{group score} is for. You can assign a score to each
-group. You can then sort the group buffer based on this score.
-Alternatively, you can sort on score and then level. (Taken together,
-the level and the score is called the @dfn{rank} of the group. A group
-that is on level 4 and has a score of 1 has a higher rank than a group
-on level 5 that has a score of 300. (The level is the most significant
-part and the score is the least significant part.))
+This is what @dfn{group score} is for. You can have Gnus assign a score
+to each group through the mechanism described below. You can then sort
+the group buffer based on this score. Alternatively, you can sort on
+score and then level. (Taken together, the level and the score is
+called the @dfn{rank} of the group. A group that is on level 4 and has
+a score of 1 has a higher rank than a group on level 5 that has a score
+of 300. (The level is the most significant part and the score is the
+least significant part.))
@findex gnus-summary-bubble-group
If you want groups you read often to get higher scores than groups you
@cindex making groups
Make a new group (@code{gnus-group-make-group}). Gnus will prompt you
for a name, a method and possibly an @dfn{address}. For an easier way
-to subscribe to @sc{nntp} groups, @pxref{Browse Foreign Server}.
+to subscribe to @acronym{NNTP} groups (@pxref{Browse Foreign Server}).
+
+@item G M
+@kindex G M (Group)
+@findex gnus-group-read-ephemeral-group
+Make an ephemeral group (@code{gnus-group-read-ephemeral-group}). Gnus
+will prompt you for a name, a method and an @dfn{address}.
@item G r
@kindex G r (Group)
Rename the current group to something else
(@code{gnus-group-rename-group}). This is valid only on some
groups---mail groups mostly. This command might very well be quite slow
-on some backends.
+on some back ends.
@item G c
@kindex G c (Group)
@kindex G h (Group)
@cindex help group
@findex gnus-group-make-help-group
-Make the Gnus help group (@code{gnus-group-make-help-group}).
+Make the gnus help group (@code{gnus-group-make-help-group}).
@item G a
@kindex G a (Group)
@findex gnus-group-make-archive-group
@vindex gnus-group-archive-directory
@vindex gnus-group-recent-archive-directory
-Make a Gnus archive group (@code{gnus-group-make-archive-group}). By
+Make a gnus archive group (@code{gnus-group-make-archive-group}). By
default a group pointing to the most recent articles will be created
(@code{gnus-group-recent-archive-directory}), but given a prefix, a full
group will be created from @code{gnus-group-archive-directory}.
@findex gnus-group-enter-directory
@cindex nneething
Read an arbitrary directory as if it were a newsgroup with the
-@code{nneething} backend (@code{gnus-group-enter-directory}).
+@code{nneething} back end (@code{gnus-group-enter-directory}).
@xref{Anything Groups}.
@item G f
Make a group based on some file or other
(@code{gnus-group-make-doc-group}). If you give a prefix to this
command, you will be prompted for a file name and a file type.
-Currently supported types are @code{babyl}, @code{mbox}, @code{digest},
-@code{mmdf}, @code{news}, @code{rnews}, @code{clari-briefs},
-@code{rfc934}, @code{rfc822-forward}, and @code{forward}. If you run
-this command without a prefix, Gnus will guess at the file type.
-@xref{Document Groups}.
+Currently supported types are @code{mbox}, @code{babyl},
+@code{digest}, @code{news}, @code{rnews}, @code{mmdf}, @code{forward},
+@code{rfc934}, @code{rfc822-forward}, @code{mime-parts},
+@code{standard-digest}, @code{slack-digest}, @code{clari-briefs},
+@code{nsmail}, @code{outlook}, @code{oe-dbx}, and @code{mailman}. If
+you run this command without a prefix, Gnus will guess at the file
+type. @xref{Document Groups}.
@item G u
@kindex G u (Group)
@item G w
@kindex G w (Group)
@findex gnus-group-make-web-group
-@cindex DejaNews
-@cindex Alta Vista
-@cindex InReference
+@cindex Google
@cindex nnweb
+@cindex gmane
Make an ephemeral group based on a web search
(@code{gnus-group-make-web-group}). If you give a prefix to this
command, make a solid group instead. You will be prompted for the
search engine type and the search string. Valid search engine types
-include @code{dejanews}, @code{altavista} and @code{reference}.
+include @code{google}, @code{dejanews}, and @code{gmane}.
@xref{Web Searches}.
-If you use the @code{dejanews} search engine, you can limit the search
+If you use the @code{google} search engine, you can limit the search
to a particular group by using a match string like
-@samp{~g alt.sysadmin.recovery shaving}.
+@samp{shaving group:alt.sysadmin.recovery}.
+
+@item G R
+@kindex G R (Group)
+@findex gnus-group-make-rss-group
+Make a group based on an @acronym{RSS} feed
+(@code{gnus-group-make-rss-group}). You will be prompted for an URL.
+@xref{RSS}.
@item G DEL
@kindex G DEL (Group)
actually delete all the articles in the group, and forcibly remove the
group itself from the face of the Earth. Use a prefix only if you are
absolutely sure of what you are doing. This command can't be used on
-read-only groups (like @code{nntp} group), though.
+read-only groups (like @code{nntp} groups), though.
@item G V
@kindex G V (Group)
(@code{gnus-group-add-to-virtual}). Uses the process/prefix convention.
@end table
-@xref{Select Methods} for more information on the various select
+@xref{Select Methods}, for more information on the various select
methods.
@vindex gnus-activate-foreign-newsgroups
If @code{gnus-activate-foreign-newsgroups} is a positive number,
-Gnus will check all foreign groups with this level or lower at startup.
+gnus will check all foreign groups with this level or lower at startup.
This might take quite a while, especially if you subscribe to lots of
-groups from different @sc{nntp} servers. Also @pxref{Group Levels};
+groups from different @acronym{NNTP} servers. Also @pxref{Group Levels};
@code{gnus-activate-level} also affects activation of foreign
newsgroups.
(auto-expire . t))
@end example
-We see that each element consists of a "dotted pair"---the thing before
+We see that each element consists of a ``dotted pair''---the thing before
the dot is the key, while the thing after the dot is the value. All the
parameters have this form @emph{except} local variable specs, which are
not dotted pairs, but proper lists.
+Some parameters have correspondent customizable variables, each of which
+is an alist of regexps and values.
+
The following group parameters can be used:
@table @code
Address used by when doing followups and new posts.
@example
-(to-address . "some@@where.com")
+(to-address . "some@@where.com")
@end example
This is primarily useful in mail groups that represent closed mailing
group is therefore impossible---you have to send mail to the mailing
list address instead.
+See also @code{gnus-parameter-to-address-alist}.
+
@item to-list
@cindex to-list
-Address used when doing a @kbd{a} in that group.
+Address used when doing @kbd{a} in that group.
@example
(to-list . "some@@where.com")
sending the message if @code{gnus-add-to-list} is set to @code{t}.
@vindex gnus-add-to-list
-If you do an @kbd{a} command in a mail group and you don't have a
-@code{to-list} group parameter, one will be added automatically upon
-sending the message.
+@findex gnus-mailing-list-mode
+@cindex mail list groups
+If this variable is set, @code{gnus-mailing-list-mode} is turned on when
+entering summary buffer.
+
+See also @code{gnus-parameter-to-list-alist}.
+
+@anchor{subscribed}
+@item subscribed
+@cindex subscribed
+@cindex Mail-Followup-To
+@findex gnus-find-subscribed-addresses
+If this parameter is set to @code{t}, Gnus will consider the
+to-address and to-list parameters for this group as addresses of
+mailing lists you are subscribed to. Giving Gnus this information is
+(only) a first step in getting it to generate correct Mail-Followup-To
+headers for your posts to these lists. The second step is to put the
+following in your @file{.gnus.el}
+
+@lisp
+(setq message-subscribed-address-functions
+ '(gnus-find-subscribed-addresses))
+@end lisp
+
+@xref{Mailing Lists, ,Mailing Lists, message, The Message Manual}, for
+a complete treatment of available MFT support.
@item visible
@cindex visible
@item broken-reply-to
@cindex broken-reply-to
Elements like @code{(broken-reply-to . t)} signals that @code{Reply-To}
-headers in this group are to be ignored. This can be useful if you're
-reading a mailing list group where the listserv has inserted
-@code{Reply-To} headers that point back to the listserv itself. This is
-broken behavior. So there!
+headers in this group are to be ignored, and for the header to be hidden
+if @code{reply-to} is part of @code{gnus-boring-article-headers}. This
+can be useful if you're reading a mailing list group where the listserv
+has inserted @code{Reply-To} headers that point back to the listserv
+itself. That is broken behavior. So there!
@item to-group
@cindex to-group
@item newsgroup
@cindex newsgroup
-If you have @code{(newsgroup . t)} in the group parameter list, Gnus
+If you have @code{(newsgroup . t)} in the group parameter list, gnus
will treat all responses as if they were responses to news articles.
This can be useful if you have a mail group that's really a mirror of a
news group.
@item gcc-self
@cindex gcc-self
If @code{(gcc-self . t)} is present in the group parameter list, newly
-composed messages will be @code{Gcc}'d to the current group. If
+composed messages will be @code{Gcc}'d to the current group. If
@code{(gcc-self . none)} is present, no @code{Gcc:} header will be
generated, if @code{(gcc-self . "string")} is present, this string will
be inserted literally as a @code{gcc} header. This parameter takes
precedence over any default @code{Gcc} rules as described later
(@pxref{Archived Messages}).
+@strong{Caveat}: Adding @code{(gcc-self . t)} to the parameter list of
+@code{nntp} groups (or the like) isn't valid. An @code{nntp} server
+doesn't accept articles.
+
@item auto-expire
@cindex auto-expire
If the group parameter has an element that looks like @code{(auto-expire
. t)}, all articles read will be marked as expirable. For an
alternative approach, @pxref{Expiring Mail}.
+See also @code{gnus-auto-expirable-newsgroups}.
+
@item total-expire
@cindex total-expire
If the group parameter has an element that looks like
caution. Unread, ticked and dormant articles are not eligible for
expiry.
+See also @code{gnus-total-expirable-newsgroups}.
+
@item expiry-wait
@cindex expiry-wait
@vindex nnmail-expiry-wait-function
-If the group parameter has an element that looks like @code{(expiry-wait
-. 10)}, this value will override any @code{nnmail-expiry-wait} and
-@code{nnmail-expiry-wait-function} when expiring expirable messages.
-The value can either be a number of days (not necessarily an integer) or
-the symbols @code{never} or @code{immediate}.
+If the group parameter has an element that looks like
+@code{(expiry-wait . 10)}, this value will override any
+@code{nnmail-expiry-wait} and @code{nnmail-expiry-wait-function}
+(@pxref{Expiring Mail}) when expiring expirable messages. The value
+can either be a number of days (not necessarily an integer) or the
+symbols @code{never} or @code{immediate}.
+
+@item expiry-target
+@cindex expiry-target
+Where expired messages end up. This parameter overrides
+@code{nnmail-expiry-target}.
@item score-file
@cindex score file group parameter
All adaptive score entries will be put into this file.
@item admin-address
+@cindex admin-address
When unsubscribing from a mailing list you should never send the
unsubscription notice to the mailing list itself. Instead, you'd send
messages to the administrative address. This parameter allows you to
put the admin address somewhere convenient.
@item display
+@cindex display
Elements that look like @code{(display . MODE)} say which articles to
display on entering the group. Valid values are:
@item all
Display all articles, both read and unread.
+@item an integer
+Display the last @var{integer} articles in the group. This is the same as
+entering the group with @kbd{C-u @var{integer}}.
+
@item default
Display the default visible articles, which normally includes unread and
ticked articles.
+
+@item an array
+Display articles that satisfy a predicate.
+
+Here are some examples:
+
+@table @code
+@item [unread]
+Display only unread articles.
+
+@item [not expire]
+Display everything except expirable articles.
+
+@item [and (not reply) (not expire)]
+Display everything except expirable and articles you've already
+responded to.
@end table
+The available operators are @code{not}, @code{and} and @code{or}.
+Predicates include @code{tick}, @code{unsend}, @code{undownload},
+@code{unread}, @code{dormant}, @code{expire}, @code{reply},
+@code{killed}, @code{bookmark}, @code{score}, @code{save},
+@code{cache}, @code{forward}, @code{unseen} and @code{recent}.
+
+@end table
+
+The @code{display} parameter works by limiting the summary buffer to
+the subset specified. You can pop the limit by using the @kbd{/ w}
+command (@pxref{Limiting}).
+
@item comment
-Elements that look like @code{(comment . "This is a comment")}
-are arbitrary comments on the group. They are currently ignored by
-Gnus, but provide a place for you to store information on particular
-groups.
+@cindex comment
+Elements that look like @code{(comment . "This is a comment")} are
+arbitrary comments on the group. You can display comments in the
+group line (@pxref{Group Line Specification}).
@item charset
+@cindex charset
Elements that look like @code{(charset . iso-8859-1)} will make
@code{iso-8859-1} the default charset; that is, the charset that will be
used for all articles that do not specify a charset.
-@item @var{(variable form)}
-You can use the group parameters to set variables local to the group you
-are entering. If you want to turn threading off in @samp{news.answers},
-you could put @code{(gnus-show-threads nil)} in the group parameters of
-that group. @code{gnus-show-threads} will be made into a local variable
-in the summary buffer you enter, and the form @code{nil} will be
-@code{eval}ed there.
+See also @code{gnus-group-charset-alist}.
+
+@item ignored-charsets
+@cindex ignored-charset
+Elements that look like @code{(ignored-charsets x-unknown iso-8859-1)}
+will make @code{iso-8859-1} and @code{x-unknown} ignored; that is, the
+default charset will be used for decoding articles.
-This can also be used as a group-specific hook function, if you'd like.
-If you want to hear a beep when you enter a group, you could put
-something like @code{(dummy-variable (ding))} in the parameters of that
-group. @code{dummy-variable} will be set to the result of the
-@code{(ding)} form, but who cares?
+See also @code{gnus-group-ignored-charsets-alist}.
@item posting-style
-You can store additional posting style information for this group only
-here (@pxref{Posting Styles}). The format is that of an entry in the
+@cindex posting-style
+You can store additional posting style information for this group
+here (@pxref{Posting Styles}). The format is that of an entry in the
@code{gnus-posting-styles} alist, except that there's no regexp matching
-the group name (of course). Style elements in this group parameter will
+the group name (of course). Style elements in this group parameter will
take precedence over the ones found in @code{gnus-posting-styles}.
For instance, if you want a funky name and signature in this group only,
@example
(posting-style
(name "Funky Name")
+ ("X-My-Header" "Funky Value")
(signature "Funky Signature"))
@end example
+@item post-method
+@cindex post-method
+If it is set, the value is used as the method for posting message
+instead of @code{gnus-post-method}.
+
+@item banner
+@cindex banner
+An item like @code{(banner . @var{regexp})} causes any part of an article
+that matches the regular expression @var{regexp} to be stripped. Instead of
+@var{regexp}, you can also use the symbol @code{signature} which strips the
+last signature or any of the elements of the alist
+@code{gnus-article-banner-alist}.
+
+@item sieve
+@cindex sieve
+This parameter contains a Sieve test that should match incoming mail
+that should be placed in this group. From this group parameter, a
+Sieve @samp{IF} control structure is generated, having the test as the
+condition and @samp{fileinto "group.name";} as the body.
+
+For example, if the @samp{INBOX.list.sieve} group has the @code{(sieve
+address "sender" "sieve-admin@@extundo.com")} group parameter, when
+translating the group parameter into a Sieve script (@pxref{Sieve
+Commands}) the following Sieve code is generated:
+
+@example
+if address \"sender\" \"sieve-admin@@extundo.com\" @{
+ fileinto \"INBOX.list.sieve\";
+@}
+@end example
+
+The Sieve language is described in RFC 3028. @xref{Top, Emacs Sieve,
+Top, sieve, Emacs Sieve}.
+
+@item (agent parameters)
+If the agent has been enabled, you can set any of the its parameters
+to control the behavior of the agent in individual groups. See Agent
+Parameters in @ref{Category Syntax}. Most users will choose to set
+agent parameters in either an agent category or group topic to
+minimize the configuration effort.
+
+@item (@var{variable} @var{form})
+You can use the group parameters to set variables local to the group you
+are entering. If you want to turn threading off in @samp{news.answers},
+you could put @code{(gnus-show-threads nil)} in the group parameters of
+that group. @code{gnus-show-threads} will be made into a local variable
+in the summary buffer you enter, and the form @code{nil} will be
+@code{eval}ed there.
+
+Note that this feature sets the variable locally to the summary buffer.
+But some variables are evaluated in the article buffer, or in the
+message buffer (of a reply or followup or otherwise newly created
+message). As a workaround, it might help to add the variable in
+question to @code{gnus-newsgroup-variables}. @xref{Various Summary
+Stuff}. So if you want to set @code{message-from-style} via the group
+parameters, then you may need the following statement elsewhere in your
+@file{~/.gnus} file:
+
+@lisp
+(add-to-list 'gnus-newsgroup-variables 'message-from-style)
+@end lisp
+
+@vindex gnus-list-identifiers
+A use for this feature is to remove a mailing list identifier tag in
+the subject fields of articles. E.g. if the news group
+
+@example
+nntp+news.gnus.org:gmane.text.docbook.apps
+@end example
+
+has the tag @samp{DOC-BOOK-APPS:} in the subject of all articles, this
+tag can be removed from the article subjects in the summary buffer for
+the group by putting @code{(gnus-list-identifiers "DOCBOOK-APPS:")}
+into the group parameters for the group.
+
+This can also be used as a group-specific hook function. If you want to
+hear a beep when you enter a group, you could put something like
+@code{(dummy-variable (ding))} in the parameters of that group.
+@code{dummy-variable} will be set to the (meaningless) result of the
+@code{(ding)} form.
+
+Alternatively, since the VARIABLE becomes local to the group, this
+pattern can be used to temporarily change a hook. For example, if the
+following is added to a group parameter
+
+@lisp
+(gnus-summary-prepared-hook
+ '(lambda nil (local-set-key "d" (local-key-binding "n"))))
+@end lisp
+
+when the group is entered, the 'd' key will not mark the article as
+expired.
+
@end table
-Use the @kbd{G p} command to edit group parameters of a group. You
-might also be interested in reading about topic parameters (@pxref{Topic
-Parameters}).
+Use the @kbd{G p} or the @kbd{G c} command to edit group parameters of a
+group. (@kbd{G p} presents you with a Lisp-based interface, @kbd{G c}
+presents you with a Customize-like interface. The latter helps avoid
+silly Lisp errors.) You might also be interested in reading about topic
+parameters (@pxref{Topic Parameters}).
+
+@vindex gnus-parameters
+Group parameters can be set via the @code{gnus-parameters} variable too.
+But some variables, such as @code{visible}, have no effect. For
+example:
+
+@lisp
+(setq gnus-parameters
+ '(("mail\\..*"
+ (gnus-show-threads nil)
+ (gnus-use-scoring nil)
+ (gnus-summary-line-format
+ "%U%R%z%I%(%[%d:%ub%-23,23f%]%) %s\n")
+ (gcc-self . t)
+ (display . all))
+
+ ("^nnimap:\\(foo.bar\\)$"
+ (to-group . "\\1"))
+
+ ("mail\\.me"
+ (gnus-use-scoring t))
+
+ ("list\\..*"
+ (total-expire . t)
+ (broken-reply-to . t))))
+@end lisp
+
+String value of parameters will be subjected to regexp substitution, as
+the @code{to-group} example shows.
@node Listing Groups
List all groups that have unread articles
(@code{gnus-group-list-groups}). If the numeric prefix is used, this
command will list only groups of level ARG and lower. By default, it
-only lists groups of level five (i. e.,
+only lists groups of level five (i.e.,
@code{gnus-group-default-list-level}) or lower (i.e., just subscribed
groups).
List all groups that have names or descriptions that match a regexp
(@code{gnus-group-description-apropos}).
+@item A c
+@kindex A c (Group)
+@findex gnus-group-list-cached
+List all groups with cached articles (@code{gnus-group-list-cached}).
+
+@item A ?
+@kindex A ? (Group)
+@findex gnus-group-list-dormant
+List all groups with dormant articles (@code{gnus-group-list-dormant}).
+
+@item A /
+@kindex A / (Group)
+@findex gnus-group-list-limit
+List groups limited within the current selection
+(@code{gnus-group-list-limit}).
+
+@item A f
+@kindex A f (Group)
+@findex gnus-group-list-flush
+Flush groups from the current selection (@code{gnus-group-list-flush}).
+
+@item A p
+@kindex A p (Group)
+@findex gnus-group-list-plus
+List groups plus the current selection (@code{gnus-group-list-plus}).
+
@end table
@vindex gnus-permanently-visible-groups
@findex gnus-group-sort-by-method
Sort alphabetically on the select method.
+@item gnus-group-sort-by-server
+@findex gnus-group-sort-by-server
+Sort alphabetically on the Gnus server name.
+
@end table
@item G S m
@kindex G S m (Group)
@findex gnus-group-sort-groups-by-method
-Sort the group buffer alphabetically by backend name
+Sort the group buffer alphabetically by back end name@*
(@code{gnus-group-sort-groups-by-method}).
+@item G S n
+@kindex G S n (Group)
+@findex gnus-group-sort-groups-by-real-name
+Sort the group buffer alphabetically by real (unprefixed) group name
+(@code{gnus-group-sort-groups-by-real-name}).
+
@end table
-All the commands below obeys the process/prefix convention
+All the commands below obey the process/prefix convention
(@pxref{Process/Prefix}).
When given a symbolic prefix (@pxref{Symbolic Prefixes}), all these
@item G P m
@kindex G P m (Group)
@findex gnus-group-sort-selected-groups-by-method
-Sort the groups alphabetically by backend name
+Sort the groups alphabetically by back end name@*
(@code{gnus-group-sort-selected-groups-by-method}).
+@item G P n
+@kindex G P n (Group)
+@findex gnus-group-sort-selected-groups-by-real-name
+Sort the groups alphabetically by real (unprefixed) group name
+(@code{gnus-group-sort-selected-groups-by-real-name}).
+
+@item G P s
+@kindex G P s (Group)
+@findex gnus-group-sort-selected-groups
+Sort the groups according to @code{gnus-group-sort-function}.
+
@end table
+And finally, note that you can use @kbd{C-k} and @kbd{C-y} to manually
+move groups around.
@node Group Maintenance
@kindex C-c C-x (Group)
@findex gnus-group-expire-articles
Run all expirable articles in the current group through the expiry
-process (if any) (@code{gnus-group-expire-articles}).
+process (if any) (@code{gnus-group-expire-articles}). That is, delete
+all expirable articles in the group that have been around for a while.
+(@pxref{Expiring Mail}).
-@item C-c M-C-x
-@kindex C-c M-C-x (Group)
+@item C-c C-M-x
+@kindex C-c C-M-x (Group)
@findex gnus-group-expire-all-groups
-Run all articles in all groups through the expiry process
+Run all expirable articles in all groups through the expiry process
(@code{gnus-group-expire-all-groups}).
@end table
@findex gnus-browse-exit
Exit browse mode (@code{gnus-browse-exit}).
+@item d
+@kindex d (Browse)
+@findex gnus-browse-describe-group
+Describe the current group (@code{gnus-browse-describe-group}).
+
@item ?
@kindex ? (Browse)
@findex gnus-browse-describe-briefly
@node Exiting Gnus
-@section Exiting Gnus
-@cindex exiting Gnus
+@section Exiting gnus
+@cindex exiting gnus
-Yes, Gnus is ex(c)iting.
+Yes, gnus is ex(c)iting.
@table @kbd
@item z
@kindex z (Group)
@findex gnus-group-suspend
-Suspend Gnus (@code{gnus-group-suspend}). This doesn't really exit Gnus,
+Suspend gnus (@code{gnus-group-suspend}). This doesn't really exit gnus,
but it kills all buffers except the Group buffer. I'm not sure why this
is a gain, but then who am I to judge?
@kindex q (Group)
@findex gnus-group-exit
@c @icon{gnus-group-exit}
-Quit Gnus (@code{gnus-group-exit}).
+Quit gnus (@code{gnus-group-exit}).
@item Q
@kindex Q (Group)
@findex gnus-group-quit
-Quit Gnus without saving the @file{.newsrc} files (@code{gnus-group-quit}).
+Quit gnus without saving the @file{.newsrc} files (@code{gnus-group-quit}).
The dribble file will be saved, though (@pxref{Auto Save}).
@end table
@vindex gnus-exit-gnus-hook
@vindex gnus-suspend-gnus-hook
-@code{gnus-suspend-gnus-hook} is called when you suspend Gnus and
-@code{gnus-exit-gnus-hook} is called when you quit Gnus, while
+@vindex gnus-after-exiting-gnus-hook
+@code{gnus-suspend-gnus-hook} is called when you suspend gnus and
+@code{gnus-exit-gnus-hook} is called when you quit gnus, while
@code{gnus-after-exiting-gnus-hook} is called as the final item when
-exiting Gnus.
-
-@findex gnus-unload
-@cindex unloading
-If you wish to completely unload Gnus and all its adherents, you can use
-the @code{gnus-unload} command. This command is also very handy when
-trying to customize meta-variables.
+exiting gnus.
Note:
@iftex
@iflatex
\gnusfigure{Group Topics}{400}{
-\put(75,50){\epsfig{figure=tmp/group-topic.ps,height=9cm}}
+\put(75,50){\epsfig{figure=ps/group-topic,height=9cm}}
}
@end iflatex
@end iftex
is a toggling command.)
Go ahead, just try it. I'll still be here when you get back. La de
-dum... Nice tune, that... la la la... What, you're back? Yes, and now
-press @kbd{l}. There. All your groups are now listed under
-@samp{misc}. Doesn't that make you feel all warm and fuzzy? Hot and
-bothered?
+dum@dots{} Nice tune, that@dots{} la la la@dots{} What, you're back?
+Yes, and now press @kbd{l}. There. All your groups are now listed
+under @samp{misc}. Doesn't that make you feel all warm and fuzzy?
+Hot and bothered?
If you want this permanently enabled, you should add that minor mode to
-the hook for the group mode:
+the hook for the group mode. Put the following line in your
+@file{~/.gnus.el} file:
@lisp
(add-hook 'gnus-group-mode-hook 'gnus-topic-mode)
@end lisp
@menu
-* Topic Variables:: How to customize the topics the Lisp Way.
-* Topic Commands:: Interactive E-Z commands.
-* Topic Sorting:: Sorting each topic individually.
-* Topic Topology:: A map of the world.
-* Topic Parameters:: Parameters that apply to all groups in a topic.
+* Topic Commands:: Interactive E-Z commands.
+* Topic Variables:: How to customize the topics the Lisp Way.
+* Topic Sorting:: Sorting each topic individually.
+* Topic Topology:: A map of the world.
+* Topic Parameters:: Parameters that apply to all groups in a topic.
@end menu
-@node Topic Variables
-@subsection Topic Variables
-@cindex topic variables
-
-Now, if you select a topic, it will fold/unfold that topic, which is
-really neat, I think.
-
-@vindex gnus-topic-line-format
-The topic lines themselves are created according to the
-@code{gnus-topic-line-format} variable (@pxref{Formatting Variables}).
-Valid elements are:
-
-@table @samp
-@item i
-Indentation.
-@item n
-Topic name.
-@item v
-Visibility.
-@item l
-Level.
-@item g
-Number of groups in the topic.
-@item a
-Number of unread articles in the topic.
-@item A
-Number of unread articles in the topic and all its subtopics.
-@end table
-
-@vindex gnus-topic-indent-level
-Each sub-topic (and the groups in the sub-topics) will be indented with
-@code{gnus-topic-indent-level} times the topic level number of spaces.
-The default is 2.
-
-@vindex gnus-topic-mode-hook
-@code{gnus-topic-mode-hook} is called in topic minor mode buffers.
-
-@vindex gnus-topic-display-empty-topics
-The @code{gnus-topic-display-empty-topics} says whether to display even
-topics that have no unread articles in them. The default is @code{t}.
-
-
@node Topic Commands
@subsection Topic Commands
@cindex topic commands
available. In addition, a few of the standard keys change their
definitions slightly.
+In general, the following kinds of operations are possible on topics.
+First of all, you want to create topics. Secondly, you want to put
+groups in topics and to move them around until you have an order you
+like. The third kind of operation is to show/hide parts of the whole
+shebang. You might want to hide a topic including its subtopics and
+groups, to get a better overview of the other groups.
+
+Here is a list of the basic keys that you might need to set up topics
+the way you like.
+
@table @kbd
@item T n
Prompt for a new topic name and create it
(@code{gnus-topic-create-topic}).
-@item T m
-@kindex T m (Topic)
+@item T TAB
+@itemx TAB
+@kindex T TAB (Topic)
+@kindex TAB (Topic)
+@findex gnus-topic-indent
+``Indent'' the current topic so that it becomes a sub-topic of the
+previous topic (@code{gnus-topic-indent}). If given a prefix,
+``un-indent'' the topic instead.
+
+@item M-TAB
+@kindex M-TAB (Topic)
+@findex gnus-topic-unindent
+``Un-indent'' the current topic so that it becomes a sub-topic of the
+parent of its current parent (@code{gnus-topic-unindent}).
+
+@end table
+
+The following two keys can be used to move groups and topics around.
+They work like the well-known cut and paste. @kbd{C-k} is like cut and
+@kbd{C-y} is like paste. Of course, this being Emacs, we use the terms
+kill and yank rather than cut and paste.
+
+@table @kbd
+
+@item C-k
+@kindex C-k (Topic)
+@findex gnus-topic-kill-group
+Kill a group or topic (@code{gnus-topic-kill-group}). All groups in the
+topic will be removed along with the topic.
+
+@item C-y
+@kindex C-y (Topic)
+@findex gnus-topic-yank-group
+Yank the previously killed group or topic
+(@code{gnus-topic-yank-group}). Note that all topics will be yanked
+before all groups.
+
+So, to move a topic to the beginning of the list of topics, just hit
+@kbd{C-k} on it. This is like the ``cut'' part of cut and paste. Then,
+move the cursor to the beginning of the buffer (just below the ``Gnus''
+topic) and hit @kbd{C-y}. This is like the ``paste'' part of cut and
+paste. Like I said -- E-Z.
+
+You can use @kbd{C-k} and @kbd{C-y} on groups as well as on topics. So
+you can move topics around as well as groups.
+
+@end table
+
+After setting up the topics the way you like them, you might wish to
+hide a topic, or to show it again. That's why we have the following
+key.
+
+@table @kbd
+
+@item RET
+@kindex RET (Topic)
+@findex gnus-topic-select-group
+@itemx SPACE
+Either select a group or fold a topic (@code{gnus-topic-select-group}).
+When you perform this command on a group, you'll enter the group, as
+usual. When done on a topic line, the topic will be folded (if it was
+visible) or unfolded (if it was folded already). So it's basically a
+toggling command on topics. In addition, if you give a numerical
+prefix, group on that level (and lower) will be displayed.
+
+@end table
+
+Now for a list of other commands, in no particular order.
+
+@table @kbd
+
+@item T m
+@kindex T m (Topic)
@findex gnus-topic-move-group
Move the current group to some other topic
(@code{gnus-topic-move-group}). This command uses the process/prefix
convention (@pxref{Process/Prefix}).
+@item T j
+@kindex T j (Topic)
+@findex gnus-topic-jump-to-topic
+Go to a topic (@code{gnus-topic-jump-to-topic}).
+
@item T c
@kindex T c (Topic)
@findex gnus-topic-copy-group
(@code{gnus-topic-copy-group}). This command uses the process/prefix
convention (@pxref{Process/Prefix}).
+@item T h
+@kindex T h (Topic)
+@findex gnus-topic-hide-topic
+Hide the current topic (@code{gnus-topic-hide-topic}). If given
+a prefix, hide the topic permanently.
+
+@item T s
+@kindex T s (Topic)
+@findex gnus-topic-show-topic
+Show the current topic (@code{gnus-topic-show-topic}). If given
+a prefix, show the topic permanently.
+
@item T D
@kindex T D (Topic)
@findex gnus-topic-remove-group
@kindex T # (Topic)
@findex gnus-topic-mark-topic
Mark all groups in the current topic with the process mark
-(@code{gnus-topic-mark-topic}).
+(@code{gnus-topic-mark-topic}). This command works recursively on
+sub-topics unless given a prefix.
@item T M-#
@kindex T M-# (Topic)
@findex gnus-topic-unmark-topic
Remove the process mark from all groups in the current topic
-(@code{gnus-topic-unmark-topic}).
-
-@item T TAB
-@itemx TAB
-@kindex T TAB (Topic)
-@kindex TAB (Topic)
-@findex gnus-topic-indent
-``Indent'' the current topic so that it becomes a sub-topic of the
-previous topic (@code{gnus-topic-indent}). If given a prefix,
-``un-indent'' the topic instead.
-
-@item M-TAB
-@kindex M-TAB (Topic)
-@findex gnus-topic-unindent
-``Un-indent'' the current topic so that it becomes a sub-topic of the
-parent of its current parent (@code{gnus-topic-unindent}).
-
-@item RET
-@kindex RET (Topic)
-@findex gnus-topic-select-group
-@itemx SPACE
-Either select a group or fold a topic (@code{gnus-topic-select-group}).
-When you perform this command on a group, you'll enter the group, as
-usual. When done on a topic line, the topic will be folded (if it was
-visible) or unfolded (if it was folded already). So it's basically a
-toggling command on topics. In addition, if you give a numerical
-prefix, group on that level (and lower) will be displayed.
+(@code{gnus-topic-unmark-topic}). This command works recursively on
+sub-topics unless given a prefix.
@item C-c C-x
@kindex C-c C-x (Topic)
@findex gnus-topic-expire-articles
-Run all expirable articles in the current group or topic through the expiry
-process (if any) (@code{gnus-topic-expire-articles}).
-
-@item C-k
-@kindex C-k (Topic)
-@findex gnus-topic-kill-group
-Kill a group or topic (@code{gnus-topic-kill-group}). All groups in the
-topic will be removed along with the topic.
-
-@item C-y
-@kindex C-y (Topic)
-@findex gnus-topic-yank-group
-Yank the previously killed group or topic
-(@code{gnus-topic-yank-group}). Note that all topics will be yanked
-before all groups.
+Run all expirable articles in the current group or topic through the
+expiry process (if any)
+(@code{gnus-topic-expire-articles}). (@pxref{Expiring Mail}).
@item T r
@kindex T r (Topic)
@item A T
@kindex A T (Topic)
@findex gnus-topic-list-active
-List all groups that Gnus knows about in a topics-ified way
+List all groups that gnus knows about in a topics-ified way
(@code{gnus-topic-list-active}).
+@item T M-n
+@kindex T M-n (Topic)
+@findex gnus-topic-goto-next-topic
+Go to the next topic (@code{gnus-topic-goto-next-topic}).
+
+@item T M-p
+@kindex T M-p (Topic)
+@findex gnus-topic-goto-previous-topic
+Go to the next topic (@code{gnus-topic-goto-previous-topic}).
+
@item G p
@kindex G p (Topic)
@findex gnus-topic-edit-parameters
@end table
+@node Topic Variables
+@subsection Topic Variables
+@cindex topic variables
+
+The previous section told you how to tell Gnus which topics to display.
+This section explains how to tell Gnus what to display about each topic.
+
+@vindex gnus-topic-line-format
+The topic lines themselves are created according to the
+@code{gnus-topic-line-format} variable (@pxref{Formatting Variables}).
+Valid elements are:
+
+@table @samp
+@item i
+Indentation.
+@item n
+Topic name.
+@item v
+Visibility.
+@item l
+Level.
+@item g
+Number of groups in the topic.
+@item a
+Number of unread articles in the topic.
+@item A
+Number of unread articles in the topic and all its subtopics.
+@end table
+
+@vindex gnus-topic-indent-level
+Each sub-topic (and the groups in the sub-topics) will be indented with
+@code{gnus-topic-indent-level} times the topic level number of spaces.
+The default is 2.
+
+@vindex gnus-topic-mode-hook
+@code{gnus-topic-mode-hook} is called in topic minor mode buffers.
+
+@vindex gnus-topic-display-empty-topics
+The @code{gnus-topic-display-empty-topics} says whether to display even
+topics that have no unread articles in them. The default is @code{t}.
+
+
@node Topic Sorting
@subsection Topic Sorting
@cindex topic sorting
@item T S m
@kindex T S m (Topic)
@findex gnus-topic-sort-groups-by-method
-Sort the current topic alphabetically by backend name
+Sort the current topic alphabetically by back end name
(@code{gnus-topic-sort-groups-by-method}).
+@item T S e
+@kindex T S e (Topic)
+@findex gnus-topic-sort-groups-by-server
+Sort the current topic alphabetically by server name
+(@code{gnus-topic-sort-groups-by-server}).
+
+@item T S s
+@kindex T S s (Topic)
+@findex gnus-topic-sort-groups
+Sort the current topic according to the function(s) given by the
+@code{gnus-group-sort-function} variable
+(@code{gnus-topic-sort-groups}).
+
@end table
-@xref{Sorting Groups} for more information about group sorting.
+When given a prefix argument, all these commands will sort in reverse
+order. @xref{Sorting Groups}, for more information about group
+sorting.
@node Topic Topology
So, let's have a look at an example group buffer:
@example
+@group
Gnus
Emacs -- I wuw it!
3: comp.emacs
Misc
8: comp.binaries.fractals
13: comp.sources.unix
+@end group
@end example
So, here we have one top-level topic (@samp{Gnus}), two topics under
@subsection Topic Parameters
@cindex topic parameters
-All groups in a topic will inherit group parameters from the parent (and
-ancestor) topic parameters. All valid group parameters are valid topic
-parameters (@pxref{Group Parameters}).
+All groups in a topic will inherit group parameters from the parent
+(and ancestor) topic parameters. All valid group parameters are valid
+topic parameters (@pxref{Group Parameters}). When the agent is
+enabled, all agent parameters (See Agent Parameters in @ref{Category
+Syntax}) are also valid topic parameters.
+
+In addition, the following parameters are only valid as topic
+parameters:
+
+@table @code
+@item subscribe
+When subscribing new groups by topic (@pxref{Subscription Methods}), the
+@code{subscribe} topic parameter says what groups go in what topic. Its
+value should be a regexp to match the groups that should go in that
+topic.
+
+@item subscribe-level
+When subscribing new groups by topic (see the @code{subscribe} parameter),
+the group will be subscribed with the level specified in the
+@code{subscribe-level} instead of @code{gnus-level-default-subscribed}.
+
+@end table
Group parameters (of course) override topic parameters, and topic
parameters in sub-topics override topic parameters in super-topics. You
verb, although you may feel free to disagree with me here.)
@example
+@group
Gnus
Emacs
3: comp.emacs
8: comp.binaries.fractals
13: comp.sources.unix
452: alt.sex.emacs
+@end group
@end example
The @samp{Emacs} topic has the topic parameter @code{(score-file
@section Misc Group Stuff
@menu
-* Scanning New Messages:: Asking Gnus to see whether new messages have arrived.
-* Group Information:: Information and help on groups and Gnus.
-* Group Timestamp:: Making Gnus keep track of when you last read a group.
-* File Commands:: Reading and writing the Gnus files.
+* Scanning New Messages:: Asking Gnus to see whether new messages have arrived.
+* Group Information:: Information and help on groups and Gnus.
+* Group Timestamp:: Making Gnus keep track of when you last read a group.
+* File Commands:: Reading and writing the Gnus files.
+* Sieve Commands:: Managing Sieve scripts.
@end menu
@table @kbd
@kindex ^ (Group)
@findex gnus-group-enter-server-mode
Enter the server buffer (@code{gnus-group-enter-server-mode}).
-@xref{The Server Buffer}.
+@xref{Server Buffer}.
@item a
@kindex a (Group)
@findex gnus-group-post-news
-Post an article to a group (@code{gnus-group-post-news}). If given a
-prefix, the current group name will be used as the default.
+Start composing a message (a news by default)
+(@code{gnus-group-post-news}). If given a prefix, post to the group
+under the point. If the prefix is 1, prompt for a group to post to.
+Contrary to what the name of this function suggests, the prepared
+article might be a mail instead of a news, if a mail group is specified
+with the prefix argument. @xref{Composing Messages}.
@item m
@kindex m (Group)
@findex gnus-group-mail
-Mail a message somewhere (@code{gnus-group-mail}).
+Mail a message somewhere (@code{gnus-group-mail}). If given a prefix,
+use the posting style of the group under the point. If the prefix is 1,
+prompt for a group name to find the posting style.
+@xref{Composing Messages}.
+
+@item i
+@kindex i (Group)
+@findex gnus-group-news
+Start composing a news (@code{gnus-group-news}). If given a prefix,
+post to the group under the point. If the prefix is 1, prompt
+for group to post to. @xref{Composing Messages}.
+
+This function actually prepares a news even when using mail groups.
+This is useful for ``posting'' messages to mail groups without actually
+sending them over the network: they're just saved directly to the group
+in question. The corresponding back end must have a request-post method
+for this to work though.
@end table
Groups matching this regexp will always be listed in the group buffer,
whether they are empty or not.
-@end table
+@item gnus-group-name-charset-method-alist
+@vindex gnus-group-name-charset-method-alist
+An alist of method and the charset for group names. It is used to show
+non-@acronym{ASCII} group names.
+
+For example:
+@lisp
+(setq gnus-group-name-charset-method-alist
+ '(((nntp "news.com.cn") . cn-gb-2312)))
+@end lisp
+
+@item gnus-group-name-charset-group-alist
+@cindex UTF-8 group names
+@vindex gnus-group-name-charset-group-alist
+An alist of regexp of group name and the charset for group names. It
+is used to show non-@acronym{ASCII} group names. @code{((".*"
+utf-8))} is the default value if UTF-8 is supported, otherwise the
+default is @code{nil}.
+For example:
+@lisp
+(setq gnus-group-name-charset-group-alist
+ '(("\\.com\\.cn:" . cn-gb-2312)))
+@end lisp
+
+@end table
@node Scanning New Messages
@subsection Scanning New Messages
this command will check only groups of level @var{arg} and lower
(@code{gnus-group-get-new-news}). If given a non-numerical prefix, this
command will force a total re-reading of the active file(s) from the
-backend(s).
+back end(s).
@item M-g
@kindex M-g (Group)
@kindex R (Group)
@cindex restarting
@findex gnus-group-restart
-Restart Gnus (@code{gnus-group-restart}). This saves the @file{.newsrc}
+Restart gnus (@code{gnus-group-restart}). This saves the @file{.newsrc}
file(s), closes the connection to all servers, clears up all run-time
-Gnus variables, and then starts Gnus all over again.
+gnus variables, and then starts gnus all over again.
@end table
@vindex gnus-group-faq-directory
@cindex FAQ
@cindex ange-ftp
-Try to fetch the FAQ for the current group
-(@code{gnus-group-fetch-faq}). Gnus will try to get the FAQ from
-@code{gnus-group-faq-directory}, which is usually a directory on a
-remote machine. This variable can also be a list of directories. In
-that case, giving a prefix to this command will allow you to choose
-between the various sites. @code{ange-ftp} (or @code{efs}) will be used
-for fetching the file.
-
-If fetching from the first site is unsuccessful, Gnus will attempt to go
+Try to fetch the @acronym{FAQ} for the current group
+(@code{gnus-group-fetch-faq}). Gnus will try to get the @acronym{FAQ}
+from @code{gnus-group-faq-directory}, which is usually a directory on
+a remote machine. This variable can also be a list of directories.
+In that case, giving a prefix to this command will allow you to choose
+between the various sites. @code{ange-ftp} (or @code{efs}) will be
+used for fetching the file.
+
+If fetching from the first site is unsuccessful, gnus will attempt to go
through @code{gnus-group-faq-directory} and try to open them one by one.
+@item H c
+@kindex H c (Group)
+@findex gnus-group-fetch-charter
+@vindex gnus-group-charter-alist
+@cindex charter
+Try to open the charter for the current group in a web browser
+(@code{gnus-group-fetch-charter}). Query for a group if given a
+prefix argument.
+
+Gnus will use @code{gnus-group-charter-alist} to find the location of
+the charter. If no location is known, Gnus will fetch the control
+messages for the group, which in some cases includes the charter.
+
+@item H C
+@kindex H C (Group)
+@findex gnus-group-fetch-control
+@vindex gnus-group-fetch-control-use-browse-url
+@cindex control message
+Fetch the control messages for the group from the archive at
+@code{ftp.isc.org} (@code{gnus-group-fetch-control}). Query for a
+group if given a prefix argument.
+
+If @code{gnus-group-fetch-control-use-browse-url} is non-@code{nil},
+Gnus will open the control messages in a browser using
+@code{browse-url}. Otherwise they are fetched using @code{ange-ftp}
+and displayed in an ephemeral group.
+
+Note that the control messages are compressed. To use this command
+you need to turn on @code{auto-compression-mode} (@pxref{Compressed
+Files, ,Compressed Files, emacs, The Emacs Manual}).
+
@item H d
@itemx C-c C-d
@c @icon{gnus-group-describe-group}
@kindex M-d (Group)
@findex gnus-group-describe-all-groups
Describe all groups (@code{gnus-group-describe-all-groups}). If given a
-prefix, force Gnus to re-read the description file from the server.
+prefix, force gnus to re-read the description file from the server.
@item H v
@itemx V
@kindex H v (Group)
@cindex version
@findex gnus-version
-Display current Gnus version numbers (@code{gnus-version}).
+Display current gnus version numbers (@code{gnus-version}).
@item ?
@kindex ? (Group)
@cindex info
@cindex manual
@findex gnus-info-find-node
-Go to the Gnus info node (@code{gnus-info-find-node}).
+Go to the gnus info node (@code{gnus-info-find-node}).
@end table
@cindex timestamps
@cindex group timestamps
-It can be convenient to let Gnus keep track of when you last read a
+It can be convenient to let gnus keep track of when you last read a
group. To set the ball rolling, you should add
@code{gnus-group-set-timestamp} to @code{gnus-select-group-hook}:
"%M\%S\%p\%P\%5y: %(%-40,40g%) %6,6~(cut 2)d\n")
@end lisp
+If you would like greater control of the time format, you can use a
+user-defined format spec. Something like the following should do the
+trick:
+
+@lisp
+(setq gnus-group-line-format
+ "%M\%S\%p\%P\%5y: %(%-40,40g%) %ud\n")
+(defun gnus-user-format-function-d (headers)
+ (let ((time (gnus-group-timestamp gnus-tmp-group)))
+ (if time
+ (format-time-string "%b %d %H:%M" time)
+ "")))
+@end lisp
+
@node File Commands
@subsection File Commands
@vindex gnus-init-file
@cindex reading init file
Re-read the init file (@code{gnus-init-file}, which defaults to
-@file{~/.gnus}) (@code{gnus-group-read-init-file}).
+@file{~/.gnus.el}) (@code{gnus-group-read-init-file}).
@item s
@kindex s (Group)
@end table
-@node The Summary Buffer
-@chapter The Summary Buffer
+@node Sieve Commands
+@subsection Sieve Commands
+@cindex group sieve commands
+
+Sieve is a server-side mail filtering language. In Gnus you can use
+the @code{sieve} group parameter (@pxref{Group Parameters}) to specify
+sieve rules that should apply to each group. Gnus provides two
+commands to translate all these group parameters into a proper Sieve
+script that can be transfered to the server somehow.
+
+@vindex gnus-sieve-file
+@vindex gnus-sieve-region-start
+@vindex gnus-sieve-region-end
+The generated Sieve script is placed in @code{gnus-sieve-file} (by
+default @file{~/.sieve}). The Sieve code that Gnus generate is placed
+between two delimiters, @code{gnus-sieve-region-start} and
+@code{gnus-sieve-region-end}, so you may write additional Sieve code
+outside these delimiters that will not be removed the next time you
+regenerate the Sieve script.
+
+@vindex gnus-sieve-crosspost
+The variable @code{gnus-sieve-crosspost} controls how the Sieve script
+is generated. If it is non-@code{nil} (the default) articles is
+placed in all groups that have matching rules, otherwise the article
+is only placed in the group with the first matching rule. For
+example, the group parameter @samp{(sieve address "sender"
+"owner-ding@@hpc.uh.edu")} will generate the following piece of Sieve
+code if @code{gnus-sieve-crosspost} is @code{nil}. (When
+@code{gnus-sieve-crosspost} is non-@code{nil}, it looks the same
+except that the line containing the call to @code{stop} is removed.)
+
+@example
+if address "sender" "owner-ding@@hpc.uh.edu" @{
+ fileinto "INBOX.ding";
+ stop;
+@}
+@end example
+
+@xref{Top, Emacs Sieve, Top, sieve, Emacs Sieve}.
+
+@table @kbd
+
+@item D g
+@kindex D g (Group)
+@findex gnus-sieve-generate
+@vindex gnus-sieve-file
+@cindex generating sieve script
+Regenerate a Sieve script from the @code{sieve} group parameters and
+put you into the @code{gnus-sieve-file} without saving it.
+
+@item D u
+@kindex D u (Group)
+@findex gnus-sieve-update
+@vindex gnus-sieve-file
+@cindex updating sieve script
+Regenerates the Gnus managed part of @code{gnus-sieve-file} using the
+@code{sieve} group parameters, save the file and upload it to the
+server using the @code{sieveshell} program.
+
+@end table
+
+
+@node Summary Buffer
+@chapter Summary Buffer
@cindex summary buffer
A line for each article is displayed in the summary buffer. You can
* Choosing Articles:: Reading articles.
* Paging the Article:: Scrolling the current article.
* Reply Followup and Post:: Posting articles.
-* Canceling and Superseding:: ``Whoops, I shouldn't have called him that.''
+* Delayed Articles:: Send articles at a later time.
* Marking Articles:: Marking articles as read, expirable, etc.
* Limiting:: You can limit the summary buffer.
* Threading:: How threads are made.
-* Sorting:: How articles and threads are sorted.
+* Sorting the Summary Buffer:: How articles and threads are sorted.
* Asynchronous Fetching:: Gnus might be able to pre-fetch articles.
* Article Caching:: You may store articles in a cache.
* Persistent Articles:: Making articles expiry-resistant.
* Decoding Articles:: Gnus can treat series of (uu)encoded articles.
* Article Treatment:: The article buffer can be mangled at will.
* MIME Commands:: Doing MIMEy things with the articles.
+* Charsets:: Character set issues.
* Article Commands:: Doing various things with the article buffer.
* Summary Sorting:: Sorting the summary buffer in various ways.
* Finding the Parent:: No child support? Get the parent.
* Tree Display:: A more visual display of threads.
* Mail Group Commands:: Some commands can only be used in mail groups.
* Various Summary Stuff:: What didn't fit anywhere else.
-* Exiting the Summary Buffer:: Returning to the Group buffer.
+* Exiting the Summary Buffer:: Returning to the Group buffer,
+ or reselecting the current group.
* Crosspost Handling:: How crossposted articles are dealt with.
* Duplicate Suppression:: An alternative when crosspost handling fails.
+* Security:: Decrypt and Verify.
+* Mailing List:: Mailing list minor mode.
@end menu
@iftex
@iflatex
\gnusfigure{The Summary Buffer}{180}{
-\put(0,0){\epsfig{figure=tmp/summary.ps,width=7.5cm}}
-\put(445,0){\makebox(0,0)[br]{\epsfig{figure=tmp/summary-article.ps,width=7.5cm}}}
+\put(0,0){\epsfig{figure=ps/summary,width=7.5cm}}
+\put(445,0){\makebox(0,0)[br]{\epsfig{figure=ps/summary-article,width=7.5cm}}}
}
@end iflatex
@end iftex
@menu
-* Summary Buffer Lines:: You can specify how summary lines should look.
-* To From Newsgroups:: How to not display your own name.
-* Summary Buffer Mode Line:: You can say how the mode line should look.
-* Summary Highlighting:: Making the summary buffer all pretty and nice.
+* Summary Buffer Lines:: You can specify how summary lines should look.
+* To From Newsgroups:: How to not display your own name.
+* Summary Buffer Mode Line:: You can say how the mode line should look.
+* Summary Highlighting:: Making the summary buffer all pretty and nice.
@end menu
@findex mail-extract-address-components
@vindex gnus-extract-address-components
Gnus will use the value of the @code{gnus-extract-address-components}
variable as a function for getting the name and address parts of a
-@code{From} header. Two pre-defined functions exist:
+@code{From} header. Three pre-defined functions exist:
@code{gnus-extract-address-components}, which is the default, quite
-fast, and too simplistic solution; and
-@code{mail-extract-address-components}, which works very nicely, but is
-slower. The default function will return the wrong answer in 5% of the
-cases. If this is unacceptable to you, use the other function instead:
+fast, and too simplistic solution;
+@code{mail-extract-address-components}, which works nicely, but is
+slower; and @code{std11-extract-address-components}, which works very
+nicely, but is slower. The default function will return the wrong
+answer in 5% of the cases. If this is unacceptable to you, use the
+other function instead:
@lisp
(setq gnus-extract-address-components
lines as a normal @code{format} string, with some extensions
(@pxref{Formatting Variables}).
-The default string is @samp{%U%R%z%I%(%[%4L: %-20,20n%]%) %s\n}.
+There should always be a colon or a point position marker on the line;
+the cursor always moves to the point position marker or the colon after
+performing an operation. (Of course, Gnus wouldn't be Gnus if it wasn't
+possible to change this. Just write a new function
+@code{gnus-goto-colon} which does whatever you like with the cursor.)
+@xref{Positioning Point}.
-The following format specification characters are understood:
+The default string is @samp{%U%R%z%I%(%[%4L: %-23,23f%]%) %s\n}.
+
+The following format specification characters and extended format
+specification(s) are understood:
@table @samp
@item N
Article number.
@item S
-Subject string.
+Subject string. List identifiers stripped,
+@code{gnus-list-identifies}. @xref{Article Hiding}.
@item s
Subject if the article is the root of the thread or the previous article
had a different subject, @code{gnus-summary-same-subject} otherwise.
@item n
The name (from the @code{From} header).
@item f
-The name, code @code{To} header or the @code{Newsgroups} header
-(@pxref{To From Newsgroups}).
+The name, @code{To} header or the @code{Newsgroups} header (@pxref{To
+From Newsgroups}).
@item a
The name (from the @code{From} header). This differs from the @code{n}
spec in that it uses the function designated by the
@item L
Number of lines in the article.
@item c
-Number of characters in the article.
+Number of characters in the article. This specifier is not supported
+in some methods (like nnfolder).
+@item k
+Pretty-printed version of the number of characters in the article;
+for example, @samp{1.2k} or @samp{0.4M}.
@item I
Indentation based on thread level (@pxref{Customizing Threading}).
+@item B
+A complex trn-style thread tree, showing response-connecting trace
+lines. A thread could be drawn like this:
+
+@example
+>
++->
+| +->
+| | \->
+| | \->
+| \->
++->
+\->
+@end example
+
+You can customize the appearance with the following options. Note
+that it is possible to make the thread display look really neat by
+replacing the default @acronym{ASCII} characters with graphic
+line-drawing glyphs.
+@table @code
+@item gnus-sum-thread-tree-root
+@vindex gnus-sum-thread-tree-root
+Used for the root of a thread. If @code{nil}, use subject
+instead. The default is @samp{> }.
+
+@item gnus-sum-thread-tree-false-root
+@vindex gnus-sum-thread-tree-false-root
+Used for the false root of a thread (@pxref{Loose Threads}). If
+@code{nil}, use subject instead. The default is @samp{> }.
+
+@item gnus-sum-thread-tree-single-indent
+@vindex gnus-sum-thread-tree-single-indent
+Used for a thread with just one message. If @code{nil}, use subject
+instead. The default is @samp{}.
+
+@item gnus-sum-thread-tree-vertical
+@vindex gnus-sum-thread-tree-vertical
+Used for drawing a vertical line. The default is @samp{| }.
+
+@item gnus-sum-thread-tree-indent
+@vindex gnus-sum-thread-tree-indent
+Used for indenting. The default is @samp{ }.
+
+@item gnus-sum-thread-tree-leaf-with-other
+@vindex gnus-sum-thread-tree-leaf-with-other
+Used for a leaf with brothers. The default is @samp{+-> }.
+
+@item gnus-sum-thread-tree-single-leaf
+@vindex gnus-sum-thread-tree-single-leaf
+Used for a leaf without brothers. The default is @samp{\-> }
+
+@end table
+
@item T
Nothing if the article is a root and lots of spaces if it isn't (it
pushes everything after it off the screen).
@item <
Twenty minus thread level spaces.
@item U
-Unread.
+Unread. @xref{Read Articles}.
@item R
This misleadingly named specifier is the @dfn{secondary mark}. This
mark will say whether the article has been replied to, has been cached,
-or has been saved.
+or has been saved. @xref{Other Marks}.
@item i
Score as a number (@pxref{Scoring}).
The line number.
@item O
Download mark.
+@item &user-date;
+Age sensitive date format. Various date format is defined in
+@code{gnus-user-date-format-alist}.
@item u
User defined specifier. The next character in the format string should
be a letter. Gnus will call the function
-@code{gnus-user-format-function-}@samp{X}, where @samp{X} is the letter
+@code{gnus-user-format-function-@var{x}}, where @var{x} is the letter
following @samp{%u}. The function will be passed the current header as
argument. The function should return a string, which will be inserted
into the summary just like information from any other summary specifier.
@end table
+Text between @samp{%(} and @samp{%)} will be highlighted with
+@code{gnus-mouse-face} when the mouse point is placed inside the area.
+There can only be one such area.
+
The @samp{%U} (status), @samp{%R} (replied) and @samp{%z} (zcore) specs
-have to be handled with care. For reasons of efficiency, Gnus will
+have to be handled with care. For reasons of efficiency, gnus will
compute what column these characters will end up in, and ``hard-code''
that. This means that it is invalid to have these specs after a
variable-length spec. Well, you might not be arrested, but your summary
The smart choice is to have these specs as far to the left as possible.
(Isn't that the case with everything, though? But I digress.)
-This restriction may disappear in later versions of Gnus.
+This restriction may disappear in later versions of gnus.
@node To From Newsgroups
@vindex nnmail-extra-headers
A related variable is @code{nnmail-extra-headers}, which controls when
-to include extra headers when generating overview (@sc{nov}) files. If
-you have old overview files, you should regenerate them after changing
-this variable.
+to include extra headers when generating overview (@acronym{NOV}) files.
+If you have old overview files, you should regenerate them after
+changing this variable, by entering the server buffer using @kbd{^},
+and then @kbd{g} on the appropriate mail server (e.g. nnml) to cause
+regeneration.
@vindex gnus-summary-line-format
You also have to instruct Gnus to display the data by changing the
@code{%n} spec to the @code{%f} spec in the
@code{gnus-summary-line-format} variable.
-In summary, you'd typically do something like the following:
+In summary, you'd typically put something like the following in
+@file{~/.gnus.el}:
@lisp
(setq gnus-extra-headers
'(To Newsgroups))
(setq nnmail-extra-headers gnus-extra-headers)
(setq gnus-summary-line-format
- "%U%R%z%I%(%[%4L: %-20,20f%]%) %s\n")
+ "%U%R%z%I%(%[%4L: %-23,23f%]%) %s\n")
(setq gnus-ignored-from-addresses
"Your Name Here")
@end lisp
-Now, this is mostly useful for mail groups, where you have control over
-the @sc{nov} files that are created. However, if you can persuade your
-nntp admin to add:
+(The values listed above are the default values in Gnus. Alter them
+to fit your needs.)
+
+A note for news server administrators, or for users who wish to try to
+convince their news server administrator to provide some additional
+support:
+
+The above is mostly useful for mail groups, where you have control over
+the @acronym{NOV} files that are created. However, if you can persuade your
+nntp admin to add (in the usual implementation, notably INN):
@example
Newsgroups:full
@item gnus-summary-highlight
@vindex gnus-summary-highlight
Summary lines are highlighted according to this variable, which is a
-list where the elements are of the format @var{(FORM . FACE)}. If you
-would, for instance, like ticked articles to be italic and high-scored
-articles to be bold, you could set this variable to something like
+list where the elements are of the format @code{(@var{form}
+. @var{face})}. If you would, for instance, like ticked articles to be
+italic and high-scored articles to be bold, you could set this variable
+to something like
@lisp
(((eq mark gnus-ticked-mark) . italic)
((> score default) . bold))
@end lisp
-As you may have guessed, if @var{FORM} returns a non-@code{nil} value,
-@var{FACE} will be applied to the line.
+As you may have guessed, if @var{form} returns a non-@code{nil} value,
+@var{face} will be applied to the line.
@end table
Go to the previous summary line of an unread article
(@code{gnus-summary-prev-unread-subject}).
-@item G j
-@itemx j
-@kindex j (Summary)
-@kindex G j (Summary)
-@findex gnus-summary-goto-article
-Ask for an article number or @code{Message-ID}, and then go to that
-article (@code{gnus-summary-goto-article}).
-
@item G g
@kindex G g (Summary)
@findex gnus-summary-goto-subject
without displaying the article (@code{gnus-summary-goto-subject}).
@end table
-If Gnus asks you to press a key to confirm going to the next group, you
+If gnus asks you to press a key to confirm going to the next group, you
can use the @kbd{C-n} and @kbd{C-p} keys to move around the group
buffer, searching for the next group to read without actually returning
to the group buffer.
@vindex gnus-auto-select-next
@item gnus-auto-select-next
If you issue one of the movement commands (like @kbd{n}) and there are
-no more unread articles after the current one, Gnus will offer to go to
+no more unread articles after the current one, gnus will offer to go to
the next group. If this variable is @code{t} and the next group is
-empty, Gnus will exit summary mode and return to the group buffer. If
-this variable is neither @code{t} nor @code{nil}, Gnus will select the
-next group, no matter whether it has any unread articles or not. As a
-special case, if this variable is @code{quietly}, Gnus will select the
-next group without asking for confirmation. If this variable is
-@code{almost-quietly}, the same will happen only if you are located on
-the last article in the group. Finally, if this variable is
-@code{slightly-quietly}, the @kbd{Z n} command will go to the next group
-without confirmation. Also @pxref{Group Levels}.
+empty, gnus will exit summary mode and return to the group buffer. If
+this variable is neither @code{t} nor @code{nil}, gnus will select the
+next group with unread articles. As a special case, if this variable
+is @code{quietly}, Gnus will select the next group without asking for
+confirmation. If this variable is @code{almost-quietly}, the same
+will happen only if you are located on the last article in the group.
+Finally, if this variable is @code{slightly-quietly}, the @kbd{Z n}
+command will go to the next group without confirmation. Also
+@pxref{Group Levels}.
@item gnus-auto-select-same
@vindex gnus-auto-select-same
@item gnus-auto-center-summary
@vindex gnus-auto-center-summary
-If non-@code{nil}, Gnus will keep the point in the summary buffer
+If non-@code{nil}, gnus will keep the point in the summary buffer
centered at all times. This makes things quite tidy, but if you have a
slow network connection, or simply do not like this un-Emacsism, you can
set this variable to @code{nil} to get the normal Emacs scrolling
@cindex selecting articles
@menu
-* Choosing Commands:: Commands for choosing articles.
-* Choosing Variables:: Variables that influence these commands.
+* Choosing Commands:: Commands for choosing articles.
+* Choosing Variables:: Variables that influence these commands.
@end menu
None of the following movement commands understand the numeric prefix,
and they all select and display an article.
+If you want to fetch new articles or redisplay the group, see
+@ref{Exiting the Summary Buffer}.
+
@table @kbd
@item SPACE
@kindex SPACE (Summary)
Select the current article, or, if that one's read already, the next
unread article (@code{gnus-summary-next-page}).
+If you have an article window open already and you press @kbd{SPACE}
+again, the article will be scrolled. This lets you conveniently
+@kbd{SPACE} through an entire newsgroup. @xref{Paging the Article}.
+
@item G n
@itemx n
@kindex n (Summary)
@kindex G b (Summary)
@kindex , (Summary)
@findex gnus-summary-best-unread-article
-Go to the article with the highest score
-(@code{gnus-summary-best-unread-article}).
+Go to the unread article with the highest score
+(@code{gnus-summary-best-unread-article}). If given a prefix argument,
+go to the first unread article that has a score over the default score.
@item G l
@itemx l
history as you like, while @kbd{l} toggles the two last read articles.
For a somewhat related issue (if you use these commands a lot),
@pxref{Article Backlog}.
+
+@item G j
+@itemx j
+@kindex j (Summary)
+@kindex G j (Summary)
+@findex gnus-summary-goto-article
+Ask for an article number or @code{Message-ID}, and then go to that
+article (@code{gnus-summary-goto-article}).
+
@end table
@item gnus-select-article-hook
@vindex gnus-select-article-hook
This hook is called whenever an article is selected. By default it
-exposes any threads hidden under the selected article.
+exposes any threads hidden under the selected article. If you would
+like each article to be saved in the Agent as you read it, putting
+@code{gnus-agent-fetch-selected-article} on this hook will do so.
@item gnus-mark-article-hook
@vindex gnus-mark-article-hook
or, if you have come to the end of the current article, will choose the
next article (@code{gnus-summary-next-page}).
+@vindex gnus-article-boring-faces
+@vindex gnus-article-skip-boring
+If @code{gnus-article-skip-boring} is non-@code{nil} and the rest of
+the article consists only of citations and signature, then it will be
+skipped; the next article will be shown instead. You can customize
+what is considered uninteresting with
+@code{gnus-article-boring-faces}. You can manually view the article's
+pages, no matter how boring, using @kbd{C-M-v}.
+
@item DEL
@kindex DEL (Summary)
@findex gnus-summary-prev-page
@kindex A g (Summary)
@kindex g (Summary)
@findex gnus-summary-show-article
+@vindex gnus-summary-show-article-charset-alist
(Re)fetch the current article (@code{gnus-summary-show-article}). If
given a prefix, fetch the current article, but don't run any of the
article treatment functions. This will give you a ``raw'' article, just
the way it came from the server.
+If given a numerical prefix, you can do semi-manual charset stuff.
+@kbd{C-u 0 g cn-gb-2312 RET} will decode the message as if it were
+encoded in the @code{cn-gb-2312} charset. If you have
+
+@lisp
+(setq gnus-summary-show-article-charset-alist
+ '((1 . cn-gb-2312)
+ (2 . big5)))
+@end lisp
+
+then you can say @kbd{C-u 1 g} to get the same effect.
+
@item A <
@itemx <
@kindex < (Summary)
@section Reply, Followup and Post
@menu
-* Summary Mail Commands:: Sending mail.
-* Summary Post Commands:: Sending news.
+* Summary Mail Commands:: Sending mail.
+* Summary Post Commands:: Sending news.
+* Summary Message Commands:: Other Message-related commands.
+* Canceling and Superseding::
@end menu
Mail a wide reply to the author of the current article
(@code{gnus-summary-wide-reply}). A @dfn{wide reply} is a reply that
goes out to all people listed in the @code{To}, @code{From} (or
-@code{Reply-to}) and @code{Cc} headers.
+@code{Reply-to}) and @code{Cc} headers. If @code{Mail-Followup-To} is
+present, that's used instead.
@item S W
@kindex S W (Summary)
message (@code{gnus-summary-wide-reply-with-original}). This command uses
the process/prefix convention.
+@item S v
+@kindex S v (Summary)
+@findex gnus-summary-very-wide-reply
+Mail a very wide reply to the author of the current article
+(@code{gnus-summary-wide-reply}). A @dfn{very wide reply} is a reply
+that goes out to all people listed in the @code{To}, @code{From} (or
+@code{Reply-to}) and @code{Cc} headers in all the process/prefixed
+articles. This command uses the process/prefix convention.
+
+@item S V
+@kindex S V (Summary)
+@findex gnus-summary-very-wide-reply-with-original
+Mail a very wide reply to the author of the current article and include the
+original message (@code{gnus-summary-very-wide-reply-with-original}). This
+command uses the process/prefix convention.
+
+@item S B r
+@kindex S B r (Summary)
+@findex gnus-summary-reply-broken-reply-to
+Mail a reply to the author of the current article but ignore the
+@code{Reply-To} field (@code{gnus-summary-reply-broken-reply-to}).
+If you need this because a mailing list incorrectly sets a
+@code{Reply-To} header pointing to the list, you probably want to set
+the @code{broken-reply-to} group parameter instead, so things will work
+correctly. @xref{Group Parameters}.
+
+@item S B R
+@kindex S B R (Summary)
+@findex gnus-summary-reply-broken-reply-to-with-original
+Mail a reply to the author of the current article and include the
+original message but ignore the @code{Reply-To} field
+(@code{gnus-summary-reply-broken-reply-to-with-original}).
+
@item S o m
+@itemx C-c C-f
@kindex S o m (Summary)
+@kindex C-c C-f (Summary)
@findex gnus-summary-mail-forward
@c @icon{gnus-summary-mail-forward}
Forward the current article to some other person
@kindex S m (Summary)
@findex gnus-summary-mail-other-window
@c @icon{gnus-summary-mail-originate}
-Send a mail to some other person
-(@code{gnus-summary-mail-other-window}).
+Prepare a mail (@code{gnus-summary-mail-other-window}). By default, use
+the posting style of the current group. If given a prefix, disable that.
+If the prefix is 1, prompt for a group name to find the posting style.
+
+@item S i
+@itemx i
+@kindex i (Summary)
+@kindex S i (Summary)
+@findex gnus-summary-news-other-window
+Prepare a news (@code{gnus-summary-news-other-window}). By default,
+post to the current group. If given a prefix, disable that. If the
+prefix is 1, prompt for a group to post to.
+
+This function actually prepares a news even when using mail groups.
+This is useful for ``posting'' messages to mail groups without actually
+sending them over the network: they're just saved directly to the group
+in question. The corresponding back end must have a request-post method
+for this to work though.
@item S D b
@kindex S D b (Summary)
resend that bounced mail (@code{gnus-summary-resend-bounced-mail}). You
will be popped into a mail buffer where you can edit the headers before
sending the mail off again. If you give a prefix to this command, and
-the bounced mail is a reply to some other mail, Gnus will try to fetch
+the bounced mail is a reply to some other mail, gnus will try to fetch
that mail and display it for easy perusal of its headers. This might
very well fail, though.
ship a mail to a different account of yours. (If you're both
@code{root} and @code{postmaster} and get a mail for @code{postmaster}
to the @code{root} account, you may want to resend it to
-@code{postmaster}. Ordnung muß sein!
+@code{postmaster}. Ordnung muss sein!
This command understands the process/prefix convention
(@pxref{Process/Prefix}).
+@item S D e
+@kindex S D e (Summary)
+@findex gnus-summary-resend-message-edit
+
+Like the previous command, but will allow you to edit the message as
+if it were a new message before resending.
+
@item S O m
@kindex S O m (Summary)
-@findex gnus-uu-digest-mail-forward
+@findex gnus-summary-digest-mail-forward
Digest the current series (@pxref{Decoding Articles}) and forward the
-result using mail (@code{gnus-uu-digest-mail-forward}). This command
-uses the process/prefix convention (@pxref{Process/Prefix}).
+result using mail (@code{gnus-summary-digest-mail-forward}). This
+command uses the process/prefix convention (@pxref{Process/Prefix}).
@item S M-c
@kindex S M-c (Summary)
@end table
-Also @pxref{(message)Header Commands} for more information.
+Also @xref{Header Commands, ,Header Commands, message, The Message
+Manual}, for more information.
@node Summary Post Commands
@kindex S p (Summary)
@findex gnus-summary-post-news
@c @icon{gnus-summary-post-news}
-Post an article to the current group
-(@code{gnus-summary-post-news}).
+Prepare for posting an article (@code{gnus-summary-post-news}). By
+default, post to the current group. If given a prefix, disable that.
+If the prefix is 1, prompt for another group instead.
@item S f
@itemx f
@c @icon{gnus-summary-followup-with-original}
@findex gnus-summary-followup-with-original
Post a followup to the current article and include the original message
-(@code{gnus-summary-followup-with-original}). This command uses the
+(@code{gnus-summary-followup-with-original}). This command uses the
process/prefix convention.
@item S n
@item S O p
@kindex S O p (Summary)
-@findex gnus-uu-digest-post-forward
+@findex gnus-summary-digest-post-forward
@cindex digests
@cindex making digests
Digest the current series and forward the result to a newsgroup
-(@code{gnus-uu-digest-mail-forward}). This command uses the
+(@code{gnus-summary-digest-post-forward}). This command uses the
process/prefix convention.
@item S u
@findex gnus-uu-post-news
@c @icon{gnus-uu-post-news}
Uuencode a file, split it into parts, and post it as a series
-(@code{gnus-uu-post-news}). (@pxref{Uuencoding and Posting}).
+(@code{gnus-uu-post-news}). (@pxref{Uuencoding and Posting}).
@end table
-Also @pxref{(message)Header Commands} for more information.
+Also @xref{Header Commands, ,Header Commands, message, The Message
+Manual}, for more information.
+
+
+@node Summary Message Commands
+@subsection Summary Message Commands
+
+@table @kbd
+@item S y
+@kindex S y (Summary)
+@findex gnus-summary-yank-message
+Yank the current article into an already existing Message composition
+buffer (@code{gnus-summary-yank-message}). This command prompts for
+what message buffer you want to yank into, and understands the
+process/prefix convention (@pxref{Process/Prefix}).
+
+@end table
@node Canceling and Superseding
-@section Canceling Articles
+@subsection Canceling Articles
@cindex canceling articles
@cindex superseding articles
want to use the standard posting method, use the @samp{a} symbolic
prefix (@pxref{Symbolic Prefixes}).
+Gnus ensures that only you can cancel your own messages using a
+@code{Cancel-Lock} header (@pxref{Canceling News, Canceling News, ,
+message, Message Manual}).
+
If you discover that you have made some mistakes and want to do some
corrections, you can post a @dfn{superseding} article that will replace
your original article.
Just remember, kids: There is no 'c' in 'supersede'.
+@node Delayed Articles
+@section Delayed Articles
+@cindex delayed sending
+@cindex send delayed
-@node Marking Articles
-@section Marking Articles
-@cindex article marking
-@cindex article ticking
-@cindex marks
+Sometimes, you might wish to delay the sending of a message. For
+example, you might wish to arrange for a message to turn up just in time
+to remind your about the birthday of your Significant Other. For this,
+there is the @code{gnus-delay} package. Setup is simple:
-There are several marks you can set on an article.
+@lisp
+(gnus-delay-initialize)
+@end lisp
-You have marks that decide the @dfn{readedness} (whoo, neato-keano
+@findex gnus-delay-article
+Normally, to send a message you use the @kbd{C-c C-c} command from
+Message mode. To delay a message, use @kbd{C-c C-j}
+(@code{gnus-delay-article}) instead. This will ask you for how long the
+message should be delayed. Possible answers are:
+
+@itemize @bullet
+@item
+A time span. Consists of an integer and a letter. For example,
+@code{42d} means to delay for 42 days. Available letters are @code{m}
+(minutes), @code{h} (hours), @code{d} (days), @code{w} (weeks), @code{M}
+(months) and @code{Y} (years).
+
+@item
+A specific date. Looks like @code{YYYY-MM-DD}. The message will be
+delayed until that day, at a specific time (eight o'clock by default).
+See also @code{gnus-delay-default-hour}.
+
+@item
+A specific time of day. Given in @code{hh:mm} format, 24h, no am/pm
+stuff. The deadline will be at that time today, except if that time has
+already passed, then it's at the given time tomorrow. So if it's ten
+o'clock in the morning and you specify @code{11:15}, then the deadline
+is one hour and fifteen minutes hence. But if you specify @code{9:20},
+that means a time tomorrow.
+@end itemize
+
+The action of the @code{gnus-delay-article} command is influenced by a
+couple of variables:
+
+@table @code
+@item gnus-delay-default-hour
+@vindex gnus-delay-default-hour
+When you specify a specific date, the message will be due on that hour
+on the given date. Possible values are integers 0 through 23.
+
+@item gnus-delay-default-delay
+@vindex gnus-delay-default-delay
+This is a string and gives the default delay. It can be of any of the
+formats described above.
+
+@item gnus-delay-group
+@vindex gnus-delay-group
+Delayed articles will be kept in this group on the drafts server until
+they are due. You probably don't need to change this. The default
+value is @code{"delayed"}.
+
+@item gnus-delay-header
+@vindex gnus-delay-header
+The deadline for each article will be stored in a header. This variable
+is a string and gives the header name. You probably don't need to
+change this. The default value is @code{"X-Gnus-Delayed"}.
+@end table
+
+The way delaying works is like this: when you use the
+@code{gnus-delay-article} command, you give a certain delay. Gnus
+calculates the deadline of the message and stores it in the
+@code{X-Gnus-Delayed} header and puts the message in the
+@code{nndraft:delayed} group.
+
+@findex gnus-delay-send-queue
+And whenever you get new news, Gnus looks through the group for articles
+which are due and sends them. It uses the @code{gnus-delay-send-queue}
+function for this. By default, this function is added to the hook
+@code{gnus-get-new-news-hook}. But of course, you can change this.
+Maybe you want to use the demon to send drafts? Just tell the demon to
+execute the @code{gnus-delay-send-queue} function.
+
+@table @code
+@item gnus-delay-initialize
+@findex gnus-delay-initialize
+
+By default, this function installs @code{gnus-delay-send-queue} in
+@code{gnus-get-new-news-hook}. But it accepts the optional second
+argument @code{no-check}. If it is non-@code{nil},
+@code{gnus-get-new-news-hook} is not changed. The optional first
+argument is ignored.
+
+For example, @code{(gnus-delay-initialize nil t)} means to do nothing.
+Presumably, you want to use the demon for sending due delayed articles.
+Just don't forget to set that up :-)
+@end table
+
+
+@node Marking Articles
+@section Marking Articles
+@cindex article marking
+@cindex article ticking
+@cindex marks
+
+There are several marks you can set on an article.
+
+You have marks that decide the @dfn{readedness} (whoo, neato-keano
neologism ohoy!) of the article. Alphabetic marks generally mean
@dfn{read}, while non-alphabetic characters generally mean @dfn{unread}.
In addition, you also have marks that do not affect readedness.
@menu
-* Unread Articles:: Marks for unread articles.
-* Read Articles:: Marks for read articles.
-* Other Marks:: Marks that do not affect readedness.
+* Unread Articles:: Marks for unread articles.
+* Read Articles:: Marks for read articles.
+* Other Marks:: Marks that do not affect readedness.
@end menu
@ifinfo
@end ifinfo
@menu
-* Setting Marks:: How to set and remove marks.
-* Setting Process Marks:: How to mark articles for later processing.
+* Setting Marks:: How to set and remove marks.
+* Generic Marking Commands:: How to customize the marking.
+* Setting Process Marks:: How to mark articles for later processing.
@end menu
@dfn{Ticked articles} are articles that will remain visible always. If
you see an article that you find interesting, or you want to put off
reading it, or replying to it, until sometime later, you'd typically
-tick it. However, articles can be expired, so if you want to keep an
-article forever, you'll have to make it persistent (@pxref{Persistent
-Articles}).
+tick it. However, articles can be expired (from news servers by the
+news server software, Gnus itself never expires ticked messages), so if
+you want to keep an article forever, you'll have to make it persistent
+(@pxref{Persistent Articles}).
@item ?
@vindex gnus-dormant-mark
@dfn{Dormant articles} will only appear in the summary buffer if there
are followups to it. If you want to see them even if they don't have
followups, you can use the @kbd{/ D} command (@pxref{Limiting}).
+Otherwise (except for the visibility issue), they are just like ticked
+messages.
@item SPACE
@vindex gnus-unread-mark
@item F
@vindex gnus-souped-mark
-@sc{SOUP}ed article (@code{gnus-souped-mark}). @xref{SOUP}.
+@sc{soup}ed article (@code{gnus-souped-mark}). @xref{SOUP}.
@item Q
@vindex gnus-sparse-mark
@item M
@vindex gnus-duplicate-mark
Article marked as read by duplicate suppression
-(@code{gnus-duplicated-mark}). @xref{Duplicate Suppression}.
+(@code{gnus-duplicate-mark}). @xref{Duplicate Suppression}.
@end table
Marking articles as @dfn{expirable} (or have them marked as such
automatically) doesn't make much sense in normal groups---a user doesn't
control expiring of news articles, but in mail groups, for instance,
-articles marked as @dfn{expirable} can be deleted by Gnus at
+articles marked as @dfn{expirable} can be deleted by gnus at
any time.
@end table
You can set a bookmark in the current article. Say you are reading a
long thesis on cats' urinary tracts, and have to go home for dinner
before you've finished reading the thesis. You can then set a bookmark
-in the article, and Gnus will jump to this bookmark the next time it
+in the article, and gnus will jump to this bookmark the next time it
encounters the article. @xref{Setting Marks}.
@item
(@code{gnus-replied-mark}).
@item
+@vindex gnus-forwarded-mark
+All articles that you have forwarded will be marked with an @samp{F} in
+the second column (@code{gnus-forwarded-mark}).
+
+@item
@vindex gnus-cached-mark
Articles stored in the article cache will be marked with an @samp{*} in
the second column (@code{gnus-cached-mark}). @xref{Article Caching}.
(@code{gnus-saved-mark}).
@item
+@vindex gnus-recent-mark
+Articles that according to the server haven't been shown to the user
+before are marked with a @samp{N} in the second column
+(@code{gnus-recent-mark}). Note that not all servers support this
+mark, in which case it simply never appears. Compare with
+@code{gnus-unseen-mark}.
+
+@item
+@vindex gnus-unseen-mark
+Articles that haven't been seen before in Gnus by the user are marked
+with a @samp{.} in the second column (@code{gnus-unseen-mark}).
+Compare with @code{gnus-recent-mark}.
+
+@item
+@vindex gnus-downloaded-mark
+When using the Gnus agent (@pxref{Agent Basics}), articles may be
+downloaded for unplugged (offline) viewing. If you are using the
+@samp{%O} spec, these articles get the @samp{+} mark in that spec.
+(The variable @code{gnus-downloaded-mark} controls which character to
+use.)
+
+@item
+@vindex gnus-undownloaded-mark
+When using the Gnus agent (@pxref{Agent Basics}), some articles might
+not have been downloaded. Such articles cannot be viewed while you
+are unplugged (offline). If you are using the @samp{%O} spec, these
+articles get the @samp{-} mark in that spec. (The variable
+@code{gnus-undownloaded-mark} controls which character to use.)
+
+@item
+@vindex gnus-downloadable-mark
+The Gnus agent (@pxref{Agent Basics}) downloads some articles
+automatically, but it is also possible to explicitly mark articles for
+download, even if they would not be downloaded automatically. Such
+explicitly-marked articles get the @samp{%} mark in the first column.
+(The variable @code{gnus-downloadable-mark} controls which character to
+use.)
+
+@item
@vindex gnus-not-empty-thread-mark
@vindex gnus-empty-thread-mark
If the @samp{%e} spec is used, the presence of threads or not will be
@item M H
@kindex M H (Summary)
@findex gnus-summary-catchup-to-here
-Catchup the current group to point
+Catchup the current group to point (before the point)
(@code{gnus-summary-catchup-to-here}).
+@item M h
+@kindex M h (Summary)
+@findex gnus-summary-catchup-from-here
+Catchup the current group from point (after the point)
+(@code{gnus-summary-catchup-from-here}).
+
@item C-w
@kindex C-w (Summary)
@findex gnus-summary-mark-region-as-read
The default is @code{t}.
+@node Generic Marking Commands
+@subsection Generic Marking Commands
+
+Some people would like the command that ticks an article (@kbd{!}) go to
+the next article. Others would like it to go to the next unread
+article. Yet others would like it to stay on the current article. And
+even though I haven't heard of anybody wanting it to go to the
+previous (unread) article, I'm sure there are people that want that as
+well.
+
+Multiply these five behaviors with five different marking commands, and
+you get a potentially complex set of variable to control what each
+command should do.
+
+To sidestep that mess, Gnus provides commands that do all these
+different things. They can be found on the @kbd{M M} map in the summary
+buffer. Type @kbd{M M C-h} to see them all---there are too many of them
+to list in this manual.
+
+While you can use these commands directly, most users would prefer
+altering the summary mode keymap. For instance, if you would like the
+@kbd{!} command to go to the next article instead of the next unread
+article, you could say something like:
+
+@lisp
+@group
+(add-hook 'gnus-summary-mode-hook 'my-alter-summary-map)
+(defun my-alter-summary-map ()
+ (local-set-key "!" 'gnus-summary-put-mark-as-ticked-next))
+@end group
+@end lisp
+
+@noindent
+or
+
+@lisp
+(defun my-alter-summary-map ()
+ (local-set-key "!" "MM!n"))
+@end lisp
+
+
@node Setting Process Marks
@subsection Setting Process Marks
@cindex setting process marks
+Process marks are displayed as @code{#} in the summary buffer, and are
+used for marking articles in such a way that other commands will
+process these articles. For instance, if you process mark four
+articles and then use the @kbd{*} command, Gnus will enter these four
+commands into the cache. For more information,
+@pxref{Process/Prefix}.
+
@table @kbd
@item M P p
Mark articles that have a @code{Subject} header that matches a regular
expression (@code{gnus-uu-mark-by-regexp}).
+@item M P G
+@kindex M P G (Summary)
+@findex gnus-uu-unmark-by-regexp
+Unmark articles that have a @code{Subject} header that matches a regular
+expression (@code{gnus-uu-unmark-by-regexp}).
+
@item M P r
@kindex M P r (Summary)
@findex gnus-uu-mark-region
Mark articles in region (@code{gnus-uu-mark-region}).
+@item M P g
+@kindex M P g (Summary)
+@findex gnus-uu-unmark-region
+Unmark articles in region (@code{gnus-uu-unmark-region}).
+
@item M P t
@kindex M P t (Summary)
@findex gnus-uu-mark-thread
@end table
+Also see the @kbd{&} command in @ref{Searching for Articles}, for how to
+set process marks based on article body contents.
+
@node Limiting
@section Limiting
@kindex / / (Summary)
@findex gnus-summary-limit-to-subject
Limit the summary buffer to articles that match some subject
-(@code{gnus-summary-limit-to-subject}).
+(@code{gnus-summary-limit-to-subject}). If given a prefix, exclude
+matching articles.
@item / a
@kindex / a (Summary)
@findex gnus-summary-limit-to-author
Limit the summary buffer to articles that match some author
-(@code{gnus-summary-limit-to-author}).
+(@code{gnus-summary-limit-to-author}). If given a prefix, exclude
+matching articles.
+
+@item / x
+@kindex / x (Summary)
+@findex gnus-summary-limit-to-extra
+Limit the summary buffer to articles that match one of the ``extra''
+headers (@pxref{To From Newsgroups})
+(@code{gnus-summary-limit-to-extra}). If given a prefix, exclude
+matching articles.
@item / u
@itemx x
@kindex / t (Summary)
@findex gnus-summary-limit-to-age
Ask for a number and then limit the summary buffer to articles older than (or equal to) that number of days
-(@code{gnus-summary-limit-to-marks}). If given a prefix, limit to
+(@code{gnus-summary-limit-to-age}). If given a prefix, limit to
articles younger than that number of days.
@item / n
(@code{gnus-summary-pop-limit}). If given a prefix, pop all limits off
the stack.
+@item / .
+@kindex / . (Summary)
+@findex gnus-summary-limit-to-unseen
+Limit the summary buffer to the unseen articles
+(@code{gnus-summary-limit-to-unseen}).
+
@item / v
@kindex / v (Summary)
@findex gnus-summary-limit-to-score
Limit the summary buffer to articles that have a score at or above some
score (@code{gnus-summary-limit-to-score}).
+@item / p
+@kindex / p (Summary)
+@findex gnus-summary-limit-to-display-predicate
+Limit the summary buffer to articles that satisfy the @code{display}
+group parameter predicate
+(@code{gnus-summary-limit-to-display-predicate}). @xref{Group
+Parameters}, for more on this predicate.
+
+@item / r
+@kindex / r (Summary)
+@findex gnus-summary-limit-to-replied
+Limit the summary buffer to replied articles
+(@code{gnus-summary-limit-to-replied}). If given a prefix, exclude
+replied articles.
+
@item / E
@itemx M S
@kindex M S (Summary)
Exclude all dormant articles from the limit
(@code{gnus-summary-limit-exclude-dormant}).
+@item / M
+@kindex / M (Summary)
+@findex gnus-summary-limit-exclude-marks
+Exclude all marked articles (@code{gnus-summary-limit-exclude-marks}).
+
@item / T
@kindex / T (Summary)
@findex gnus-summary-limit-include-thread
@item / c
@kindex / c (Summary)
@findex gnus-summary-limit-exclude-childless-dormant
-Exclude all dormant articles that have no children from the limit
+Exclude all dormant articles that have no children from the limit@*
(@code{gnus-summary-limit-exclude-childless-dormant}).
@item / C
@kindex / C (Summary)
@findex gnus-summary-limit-mark-excluded-as-read
Mark all excluded unread articles as read
-(@code{gnus-summary-limit-mark-excluded-as-read}). If given a prefix,
+(@code{gnus-summary-limit-mark-excluded-as-read}). If given a prefix,
also mark excluded ticked and dormant articles as read.
+@item / N
+@kindex / N (Summary)
+@findex gnus-summary-insert-new-articles
+Insert all new articles in the summary buffer. It scans for new emails
+if @var{back-end}@code{-get-new-mail} is non-@code{nil}.
+
+@item / o
+@kindex / o (Summary)
+@findex gnus-summary-insert-old-articles
+Insert all old articles in the summary buffer. If given a numbered
+prefix, fetch this number of articles.
+
@end table
Threading is done by looking at the @code{References} headers of the
articles. In a perfect world, this would be enough to build pretty
trees, but unfortunately, the @code{References} header is often broken
-or simply missing. Weird news propagation excarcerbates the problem,
+or simply missing. Weird news propagation exacerbates the problem,
so one has to employ other heuristics to get pleasing results. A
plethora of approaches exists, as detailed in horrible detail in
-@pxref{Customizing Threading}.
+@ref{Customizing Threading}.
First, a quick overview of the concepts:
@menu
-* Customizing Threading:: Variables you can change to affect the threading.
-* Thread Commands:: Thread based commands in the summary buffer.
+* Customizing Threading:: Variables you can change to affect the threading.
+* Thread Commands:: Thread based commands in the summary buffer.
@end menu
@cindex customizing threading
@menu
-* Loose Threads:: How Gnus gathers loose threads into bigger threads.
-* Filling In Threads:: Making the threads displayed look fuller.
-* More Threading:: Even more variables for fiddling with threads.
-* Low-Level Threading:: You thought it was over... but you were wrong!
+* Loose Threads:: How Gnus gathers loose threads into bigger threads.
+* Filling In Threads:: Making the threads displayed look fuller.
+* More Threading:: Even more variables for fiddling with threads.
+* Low-Level Threading:: You thought it was over@dots{} but you were wrong!
@end menu
@table @code
@item gnus-summary-make-false-root
@vindex gnus-summary-make-false-root
-If non-@code{nil}, Gnus will gather all loose subtrees into one big tree
+If non-@code{nil}, gnus will gather all loose subtrees into one big tree
and create a dummy root at the top. (Wait a minute. Root at the top?
Yup.) Loose subtrees occur when the real root has expired, or you've
read or killed the root in a previous session.
-When there is no real root of a thread, Gnus will have to fudge
-something. This variable says what fudging method Gnus should use.
+When there is no real root of a thread, gnus will have to fudge
+something. This variable says what fudging method gnus should use.
There are four possible values:
@iftex
@iflatex
\gnusfigure{The Summary Buffer}{390}{
-\put(0,0){\epsfig{figure=tmp/summary-adopt.ps,width=7.5cm}}
-\put(445,0){\makebox(0,0)[br]{\epsfig{figure=tmp/summary-empty.ps,width=7.5cm}}}
-\put(0,400){\makebox(0,0)[tl]{\epsfig{figure=tmp/summary-none.ps,width=7.5cm}}}
-\put(445,400){\makebox(0,0)[tr]{\epsfig{figure=tmp/summary-dummy.ps,width=7.5cm}}}
+\put(0,0){\epsfig{figure=ps/summary-adopt,width=7.5cm}}
+\put(445,0){\makebox(0,0)[br]{\epsfig{figure=ps/summary-empty,width=7.5cm}}}
+\put(0,400){\makebox(0,0)[tl]{\epsfig{figure=ps/summary-none,width=7.5cm}}}
+\put(445,400){\makebox(0,0)[tr]{\epsfig{figure=ps/summary-dummy,width=7.5cm}}}
}
@end iflatex
@end iftex
@item dummy
@vindex gnus-summary-dummy-line-format
+@vindex gnus-summary-make-false-root-always
Gnus will create a dummy summary line that will pretend to be the
parent. This dummy line does not correspond to any real article, so
selecting it will just select the first real article after the dummy
article. @code{gnus-summary-dummy-line-format} is used to specify the
format of the dummy roots. It accepts only one format spec: @samp{S},
which is the subject of the article. @xref{Formatting Variables}.
+If you want all threads to have a dummy root, even the non-gathered
+ones, set @code{gnus-summary-make-false-root-always} to @code{t}.
@item empty
Gnus won't actually make any article the parent, but simply leave the
@item gnus-summary-gather-subject-limit
@vindex gnus-summary-gather-subject-limit
Loose threads are gathered by comparing subjects of articles. If this
-variable is @code{nil}, Gnus requires an exact match between the
+variable is @code{nil}, gnus requires an exact match between the
subjects of the loose threads before gathering them into one big
super-thread. This might be too strict a requirement, what with the
presence of stupid newsreaders that chop off long subject lines. If
you think so, set this variable to, say, 20 to require that only the
first 20 characters of the subjects have to match. If you set this
-variable to a really low number, you'll find that Gnus will gather
+variable to a really low number, you'll find that gnus will gather
everything in sight into one thread, which isn't very helpful.
@cindex fuzzy article gathering
-If you set this variable to the special value @code{fuzzy}, Gnus will
+If you set this variable to the special value @code{fuzzy}, gnus will
use a fuzzy string comparison algorithm on the subjects (@pxref{Fuzzy
Matching}).
@item gnus-simplify-whitespace
@findex gnus-simplify-whitespace
Remove excessive whitespace.
+
+@item gnus-simplify-all-whitespace
+@findex gnus-simplify-all-whitespace
+Remove all whitespace.
@end table
You may also write your own functions, of course.
@table @code
@item gnus-fetch-old-headers
@vindex gnus-fetch-old-headers
-If non-@code{nil}, Gnus will attempt to build old threads by fetching
-more old headers---headers to articles marked as read. If you
-would like to display as few summary lines as possible, but still
-connect as many loose threads as possible, you should set this variable
-to @code{some} or a number. If you set it to a number, no more than
-that number of extra old headers will be fetched. In either case,
-fetching old headers only works if the backend you are using carries
-overview files---this would normally be @code{nntp}, @code{nnspool} and
-@code{nnml}. Also remember that if the root of the thread has been
-expired by the server, there's not much Gnus can do about that.
+If non-@code{nil}, gnus will attempt to build old threads by fetching
+more old headers---headers to articles marked as read. If you would
+like to display as few summary lines as possible, but still connect as
+many loose threads as possible, you should set this variable to
+@code{some} or a number. If you set it to a number, no more than that
+number of extra old headers will be fetched. In either case, fetching
+old headers only works if the back end you are using carries overview
+files---this would normally be @code{nntp}, @code{nnspool},
+@code{nnml}, and @code{nnmaildir}. Also remember that if the root of
+the thread has been expired by the server, there's not much Gnus can
+do about that.
This variable can also be set to @code{invisible}. This won't have any
visible effects, but is useful if you use the @kbd{A T} command a lot
(@pxref{Finding the Parent}).
+@item gnus-fetch-old-ephemeral-headers
+@vindex gnus-fetch-old-ephemeral-headers
+Same as @code{gnus-fetch-old-headers}, but only used for ephemeral
+newsgroups.
+
@item gnus-build-sparse-threads
@vindex gnus-build-sparse-threads
Fetching old headers can be slow. A low-rent similar effect can be
gotten by setting this variable to @code{some}. Gnus will then look at
the complete @code{References} headers of all articles and try to string
together articles that belong in the same thread. This will leave
-@dfn{gaps} in the threading display where Gnus guesses that an article
+@dfn{gaps} in the threading display where gnus guesses that an article
is missing from the thread. (These gaps appear like normal summary
-lines. If you select a gap, Gnus will try to fetch the article in
-question.) If this variable is @code{t}, Gnus will display all these
+lines. If you select a gap, gnus will try to fetch the article in
+question.) If this variable is @code{t}, gnus will display all these
``gaps'' without regard for whether they are useful for completing the
-thread or not. Finally, if this variable is @code{more}, Gnus won't cut
+thread or not. Finally, if this variable is @code{more}, gnus won't cut
off sparse leaf nodes that don't lead anywhere. This variable is
@code{nil} by default.
+@item gnus-read-all-available-headers
+@vindex gnus-read-all-available-headers
+This is a rather obscure variable that few will find useful. It's
+intended for those non-news newsgroups where the back end has to fetch
+quite a lot to present the summary buffer, and where it's impossible to
+go back to parents of articles. This is mostly the case in the
+web-based groups, like the @code{nnultimate} groups.
+
+If you don't use those, then it's safe to leave this as the default
+@code{nil}. If you want to use this variable, it should be a regexp
+that matches the group name, or @code{t} for all groups.
+
@end table
If non-@code{nil}, all threads will be hidden when the summary buffer is
generated.
+This can also be a predicate specifier (@pxref{Predicate Specifiers}).
+Available predicates are @code{gnus-article-unread-p} and
+@code{gnus-article-unseen-p}.
+
+Here's an example:
+
+@lisp
+(setq gnus-thread-hide-subtree
+ '(or gnus-article-unread-p
+ gnus-article-unseen-p))
+@end lisp
+
+(It's a pretty nonsensical example, since all unseen articles are also
+unread, but you get my drift.)
+
+
@item gnus-thread-expunge-below
@vindex gnus-thread-expunge-below
All threads that have a total score (as defined by
@item gnus-thread-ignore-subject
@vindex gnus-thread-ignore-subject
Sometimes somebody changes the subject in the middle of a thread. If
-this variable is non-@code{nil}, the subject change is ignored. If it
-is @code{nil}, which is the default, a change in the subject will result
-in a new thread.
+this variable is non-@code{nil}, which is the default, the subject
+change is ignored. If it is @code{nil}, a change in the subject will
+result in a new thread.
@item gnus-thread-indent-level
@vindex gnus-thread-indent-level
This is a number that says how much each sub-thread should be indented.
The default is 4.
+@item gnus-sort-gathered-threads-function
+@vindex gnus-sort-gathered-threads-function
+Sometimes, particularly with mailing lists, the order in which mails
+arrive locally is not necessarily the same as the order in which they
+arrived on the mailing list. Consequently, when sorting sub-threads
+using the default @code{gnus-thread-sort-by-number}, responses can end
+up appearing before the article to which they are responding to.
+Setting this variable to an alternate value
+(e.g. @code{gnus-thread-sort-by-date}), in a group's parameters or in an
+appropriate hook (e.g. @code{gnus-summary-generate-hook}) can produce a
+more logical sub-thread ordering in such instances.
+
@end table
@item gnus-parse-headers-hook
@vindex gnus-parse-headers-hook
-Hook run before parsing any headers.
+Hook run before parsing any headers. The default value is
+@code{(gnus-set-summary-default-charset)}, which sets up local value of
+@code{default-mime-charset} in summary buffer based on variable
+@code{gnus-newsgroup-default-charset-alist}.
@item gnus-alter-header-function
@vindex gnus-alter-header-function
@table @kbd
@item T k
-@itemx M-C-k
+@itemx C-M-k
@kindex T k (Summary)
-@kindex M-C-k (Summary)
+@kindex C-M-k (Summary)
@findex gnus-summary-kill-thread
Mark all articles in the current (sub-)thread as read
(@code{gnus-summary-kill-thread}). If the prefix argument is positive,
articles instead.
@item T l
-@itemx M-C-l
+@itemx C-M-l
@kindex T l (Summary)
-@kindex M-C-l (Summary)
+@kindex C-M-l (Summary)
@findex gnus-summary-lower-thread
Lower the score of the current (sub-)thread
(@code{gnus-summary-lower-thread}).
@item T s
@kindex T s (Summary)
@findex gnus-summary-show-thread
-Expose the (sub-)thread hidden under the current article, if any
+Expose the (sub-)thread hidden under the current article, if any@*
(@code{gnus-summary-show-thread}).
@item T h
@item T n
@kindex T n (Summary)
+@itemx C-M-f
+@kindex C-M-n (Summary)
+@itemx M-down
+@kindex M-down (Summary)
@findex gnus-summary-next-thread
Go to the next thread (@code{gnus-summary-next-thread}).
@item T p
@kindex T p (Summary)
+@itemx C-M-b
+@kindex C-M-p (Summary)
+@itemx M-up
+@kindex M-up (Summary)
@findex gnus-summary-prev-thread
Go to the previous thread (@code{gnus-summary-prev-thread}).
@vindex gnus-thread-operation-ignore-subject
If you ignore subject while threading, you'll naturally end up with
threads that have several different subjects in them. If you then issue
-a command like `T k' (@code{gnus-summary-kill-thread}) you might not
+a command like @kbd{T k} (@code{gnus-summary-kill-thread}) you might not
wish to kill the entire thread, but just those parts of the thread that
have the same subject as the current article. If you like this idea,
you can fiddle with @code{gnus-thread-operation-ignore-subject}. If it
Matching}).
-@node Sorting
-@section Sorting
+@node Sorting the Summary Buffer
+@section Sorting the Summary Buffer
@findex gnus-thread-sort-by-total-score
@findex gnus-thread-sort-by-date
@findex gnus-thread-sort-by-subject
@findex gnus-thread-sort-by-author
@findex gnus-thread-sort-by-number
+@findex gnus-thread-sort-by-random
@vindex gnus-thread-sort-functions
+@findex gnus-thread-sort-by-most-recent-number
+@findex gnus-thread-sort-by-most-recent-date
If you are using a threaded summary display, you can sort the threads by
setting @code{gnus-thread-sort-functions}, which can be either a single
function, a list of functions, or a list containing functions and
By default, sorting is done on article numbers. Ready-made sorting
predicate functions include @code{gnus-thread-sort-by-number},
@code{gnus-thread-sort-by-author}, @code{gnus-thread-sort-by-subject},
-@code{gnus-thread-sort-by-date}, @code{gnus-thread-sort-by-score}, and
+@code{gnus-thread-sort-by-date}, @code{gnus-thread-sort-by-score},
+@code{gnus-thread-sort-by-most-recent-number},
+@code{gnus-thread-sort-by-most-recent-date},
+@code{gnus-thread-sort-by-random} and
@code{gnus-thread-sort-by-total-score}.
Each function takes two threads and returns non-@code{nil} if the first
(setq gnus-thread-sort-functions
'(gnus-thread-sort-by-number
gnus-thread-sort-by-subject
- (reverse gnus-thread-sort-by-total-score)))
+ (not gnus-thread-sort-by-total-score)))
@end lisp
The threads that have highest score will be displayed first in the
@findex gnus-article-sort-by-score
@findex gnus-article-sort-by-subject
@findex gnus-article-sort-by-author
+@findex gnus-article-sort-by-random
@findex gnus-article-sort-by-number
-If you are using an unthreaded display for some strange reason or other,
-you have to fiddle with the @code{gnus-article-sort-functions} variable.
-It is very similar to the @code{gnus-thread-sort-functions}, except that
-it uses slightly different functions for article comparison. Available
-sorting predicate functions are @code{gnus-article-sort-by-number},
-@code{gnus-article-sort-by-author}, @code{gnus-article-sort-by-subject},
-@code{gnus-article-sort-by-date}, and @code{gnus-article-sort-by-score}.
+If you are using an unthreaded display for some strange reason or
+other, you have to fiddle with the @code{gnus-article-sort-functions}
+variable. It is very similar to the
+@code{gnus-thread-sort-functions}, except that it uses slightly
+different functions for article comparison. Available sorting
+predicate functions are @code{gnus-article-sort-by-number},
+@code{gnus-article-sort-by-author},
+@code{gnus-article-sort-by-subject}, @code{gnus-article-sort-by-date},
+@code{gnus-article-sort-by-random}, and
+@code{gnus-article-sort-by-score}.
If you want to sort an unthreaded summary display by subject, you could
say something like:
@cindex article pre-fetch
@cindex pre-fetch
-If you read your news from an @sc{nntp} server that's far away, the
+If you read your news from an @acronym{NNTP} server that's far away, the
network latencies may make reading articles a chore. You have to wait
for a while after pressing @kbd{n} to go to the next article before the
-article appears. Why can't Gnus just go ahead and fetch the article
+article appears. Why can't gnus just go ahead and fetch the article
while you are reading the previous one? Why not, indeed.
First, some caveats. There are some pitfalls to using asynchronous
-article fetching, especially the way Gnus does it.
+article fetching, especially the way gnus does it.
Let's say you are reading article 1, which is short, and article 2 is
quite long, and you are not interested in reading that. Gnus does not
know this, so it goes ahead and fetches article 2. You decide to read
-article 3, but since Gnus is in the process of fetching article 2, the
+article 3, but since gnus is in the process of fetching article 2, the
connection is blocked.
-To avoid these situations, Gnus will open two (count 'em two)
+To avoid these situations, gnus will open two (count 'em two)
connections to the server. Some people may think this isn't a very nice
thing to do, but I don't see any real alternatives. Setting up that
-extra connection takes some time, so Gnus startup will be slower.
+extra connection takes some time, so gnus startup will be slower.
Gnus will fetch more articles than you will read. This will mean that
-the link between your machine and the @sc{nntp} server will become more
+the link between your machine and the @acronym{NNTP} server will become more
loaded than if you didn't use article pre-fetch. The server itself will
also become more loaded---both with the extra article requests, and the
extra connection.
-Ok, so now you know that you shouldn't really use this thing... unless
+Ok, so now you know that you shouldn't really use this thing@dots{} unless
you really want to.
@vindex gnus-asynchronous
@vindex gnus-use-article-prefetch
You can control how many articles are to be pre-fetched by setting
@code{gnus-use-article-prefetch}. This is 30 by default, which means
-that when you read an article in the group, the backend will pre-fetch
-the next 30 articles. If this variable is @code{t}, the backend will
+that when you read an article in the group, the back end will pre-fetch
+the next 30 articles. If this variable is @code{t}, the back end will
pre-fetch all the articles it can without bound. If it is
@code{nil}, no pre-fetching will be done.
@vindex gnus-async-prefetch-article-p
@findex gnus-async-read-p
There are probably some articles that you don't want to pre-fetch---read
-articles, for instance. The @code{gnus-async-prefetch-article-p} variable controls whether an article is to be pre-fetched. This function should
-return non-@code{nil} when the article in question is to be
-pre-fetched. The default is @code{gnus-async-read-p}, which returns
-@code{nil} on read articles. The function is called with an article
-data structure as the only parameter.
+articles, for instance. The @code{gnus-async-prefetch-article-p}
+variable controls whether an article is to be pre-fetched. This
+function should return non-@code{nil} when the article in question is
+to be pre-fetched. The default is @code{gnus-async-read-p}, which
+returns @code{nil} on read articles. The function is called with an
+article data structure as the only parameter.
-If, for instance, you wish to pre-fetch only unread articles shorter than 100 lines, you could say something like:
+If, for instance, you wish to pre-fetch only unread articles shorter
+than 100 lines, you could say something like:
@lisp
(defun my-async-short-unread-p (data)
@end lisp
These functions will be called many, many times, so they should
-preferably be short and sweet to avoid slowing down Gnus too much.
+preferably be short and sweet to avoid slowing down gnus too much.
It's probably a good idea to byte-compile things like this.
@vindex gnus-prefetched-article-deletion-strategy
@cindex article caching
@cindex caching
-If you have an @emph{extremely} slow @sc{nntp} connection, you may
+If you have an @emph{extremely} slow @acronym{NNTP} connection, you may
consider turning article caching on. Each article will then be stored
locally under your home directory. As you may surmise, this could
potentially use @emph{huge} amounts of disk space, as well as eat up all
To turn caching on, set @code{gnus-use-cache} to @code{t}. By default,
all articles ticked or marked as dormant will then be copied
over to your local cache (@code{gnus-cache-directory}). Whether this
-cache is flat or hierarchal is controlled by the
+cache is flat or hierarchical is controlled by the
@code{gnus-use-long-file-name} variable, as usual.
When re-selecting a ticked or dormant article, it will be fetched from the
picture? The @code{gnus-jog-cache} command will go through all
subscribed newsgroups, request all unread articles, score them, and
store them in the cache. You should only ever, ever ever ever, use this
-command if 1) your connection to the @sc{nntp} server is really, really,
+command if 1) your connection to the @acronym{NNTP} server is really, really,
really slow and 2) you have a really, really, really huge disk.
Seriously. One way to cut down on the number of articles downloaded is
to score unwanted articles down and have them marked as read. They will
To limit the caching, you could set @code{gnus-cacheable-groups} to a
regexp of groups to cache, @samp{^nntp} for instance, or set the
@code{gnus-uncacheable-groups} regexp to @samp{^nnml}, for instance.
-Both variables are @code{nil} by default. If a group matches both
+Both variables are @code{nil} by default. If a group matches both
variables, the group is not cached.
@findex gnus-cache-generate-nov-databases
@vindex gnus-cache-active-file
The cache stores information on what articles it contains in its active
file (@code{gnus-cache-active-file}). If this file (or any other parts
-of the cache) becomes all messed up for some reason or other, Gnus
+of the cache) becomes all messed up for some reason or other, gnus
offers two functions that will try to set things right. @kbd{M-x
-gnus-cache-generate-nov-databases} will (re)build all the @sc{nov}
+gnus-cache-generate-nov-databases} will (re)build all the @acronym{NOV}
files, and @kbd{gnus-cache-generate-active} will (re)generate the active
file.
+@findex gnus-cache-move-cache
+@code{gnus-cache-move-cache} will move your whole
+@code{gnus-cache-directory} to some other location. You get asked to
+where, isn't that cool?
@node Persistent Articles
@section Persistent Articles
If you have a slow connection, but the idea of using caching seems
unappealing to you (and it is, really), you can help the situation some
-by switching on the @dfn{backlog}. This is where Gnus will buffer
+by switching on the @dfn{backlog}. This is where gnus will buffer
already read articles so that it doesn't have to re-fetch articles
you've already read. This only helps if you are in the habit of
re-selecting articles you've recently read, of course. If you never do
-that, turning the backlog on will slow Gnus down a little bit, and
+that, turning the backlog on will slow gnus down a little bit, and
increase memory usage some.
@vindex gnus-keep-backlog
-If you set @code{gnus-keep-backlog} to a number @var{n}, Gnus will store
+If you set @code{gnus-keep-backlog} to a number @var{n}, gnus will store
at most @var{n} old articles in a buffer for later re-fetching. If this
-variable is non-@code{nil} and is not a number, Gnus will store
+variable is non-@code{nil} and is not a number, gnus will store
@emph{all} read articles, which means that your Emacs will grow without
bound before exploding and taking your machine down with you. I put
that in there just to keep y'all on your toes.
-This variable is @code{nil} by default.
+The default value is 20.
@node Saving Articles
approach (uudecoding, unsharing) you should use @code{gnus-uu}
(@pxref{Decoding Articles}).
+For the commands listed here, the target is a file. If you want to
+save to a group, see the @kbd{B c} (@code{gnus-summary-copy-article})
+command (@pxref{Mail Group Commands}).
+
@vindex gnus-save-all-headers
-If @code{gnus-save-all-headers} is non-@code{nil}, Gnus will not delete
+If @code{gnus-save-all-headers} is non-@code{nil}, gnus will not delete
unwanted headers before saving the article.
@vindex gnus-saved-headers
@item O r
@kindex O r (Summary)
@findex gnus-summary-save-article-rmail
-Save the current article in rmail format
+Save the current article in Rmail format
(@code{gnus-summary-save-article-rmail}).
@item O f
(@code{gnus-summary-save-article-vm}).
@item O p
+@itemx |
@kindex O p (Summary)
+@kindex | (Summary)
@findex gnus-summary-pipe-output
Save the current article in a pipe. Uhm, like, what I mean is---Pipe
the current article to a process (@code{gnus-summary-pipe-output}).
+If given a symbolic prefix (@pxref{Symbolic Prefixes}), include the
+complete headers in the piped output.
+
+@item O P
+@kindex O P (Summary)
+@findex gnus-summary-muttprint
+@vindex gnus-summary-muttprint-program
+Save the current article into muttprint. That is, print it using the
+external program @uref{http://muttprint.sourceforge.net/,
+Muttprint}. The program name and options to use is controlled by the
+variable @code{gnus-summary-muttprint-program}.
+(@code{gnus-summary-muttprint}).
+
@end table
@vindex gnus-prompt-before-saving
@vindex gnus-default-article-saver
You can customize the @code{gnus-default-article-saver} variable to make
-Gnus do what you want it to. You can use any of the six ready-made
+gnus do what you want it to. You can use any of the six ready-made
functions below, or you can create your own.
@table @code
@findex gnus-summary-save-in-rmail
@vindex gnus-rmail-save-name
@findex gnus-plain-save-name
-This is the default format, @dfn{babyl}. Uses the function in the
+This is the default format, @dfn{Babyl}. Uses the function in the
@code{gnus-rmail-save-name} variable to get a file name to save the
article in. The default is @code{gnus-plain-save-name}.
the @code{gnus-file-save-name} variable to get a file name to save the
article in. The default is @code{gnus-numeric-save-name}.
+@item gnus-summary-write-to-file
+@findex gnus-summary-write-to-file
+Write the article straight to an ordinary file. The file is
+overwritten if it exists. Uses the function in the
+@code{gnus-file-save-name} variable to get a file name to save the
+article in. The default is @code{gnus-numeric-save-name}.
+
@item gnus-summary-save-body-in-file
@findex gnus-summary-save-body-in-file
Append the article body to an ordinary file. Uses the function in the
@vindex gnus-article-save-directory
All of these functions, except for the last one, will save the article
in the @code{gnus-article-save-directory}, which is initialized from the
-@code{SAVEDIR} environment variable. This is @file{~/News/} by
+@env{SAVEDIR} environment variable. This is @file{~/News/} by
default.
As you can see above, the functions use different functions to find a
@item gnus-plain-save-name
@findex gnus-plain-save-name
File names like @file{~/News/alt.andrea-dworkin}.
+
+@item gnus-sender-save-name
+@findex gnus-sender-save-name
+File names like @file{~/News/larsi}.
@end table
@vindex gnus-split-methods
-You can have Gnus suggest where to save articles by plonking a regexp into
+You can have gnus suggest where to save articles by plonking a regexp into
the @code{gnus-split-methods} alist. For instance, if you would like to
-save articles related to Gnus in the file @file{gnus-stuff}, and articles
-related to VM in @code{vm-stuff}, you could set this variable to something
+save articles related to gnus in the file @file{gnus-stuff}, and articles
+related to VM in @file{vm-stuff}, you could set this variable to something
like:
@lisp
name completion over the results from applying this variable.
This variable is @code{((gnus-article-archive-name))} by default, which
-means that Gnus will look at the articles it saves for an
+means that gnus will look at the articles it saves for an
@code{Archive-name} line and use that as a suggestion for the file
name.
a spool, you could
@lisp
-(setq gnus-use-long-file-name '(not-save)) ; to get a hierarchy
-(setq gnus-default-article-saver 'gnus-summary-save-in-file) ; no encoding
+(setq gnus-use-long-file-name '(not-save)) ; @r{to get a hierarchy}
+(setq gnus-default-article-saver
+ 'gnus-summary-save-in-file) ; @r{no encoding}
@end lisp
Then just save with @kbd{o}. You'd then read this hierarchy with
encoded in some way or other. Gnus can decode them for you.
@menu
-* Uuencoded Articles:: Uudecode articles.
-* Shell Archives:: Unshar articles.
-* PostScript Files:: Split PostScript.
-* Other Files:: Plain save and binhex.
-* Decoding Variables:: Variables for a happy decoding.
-* Viewing Files:: You want to look at the result of the decoding?
+* Uuencoded Articles:: Uudecode articles.
+* Shell Archives:: Unshar articles.
+* PostScript Files:: Split PostScript.
+* Other Files:: Plain save and binhex.
+* Decoding Variables:: Variables for a happy decoding.
+* Viewing Files:: You want to look at the result of the decoding?
@end menu
@cindex series
simplish rule: The subjects must be (nearly) identical, except for the
last two numbers of the line. (Spaces are largely ignored, however.)
-For example: If you choose a subject called @samp{cat.gif (2/3)}, Gnus
+For example: If you choose a subject called @samp{cat.gif (2/3)}, gnus
will find all the articles that match the regexp @samp{^cat.gif
([0-9]+/[0-9]+).*$}.
Adjective, not verb.
@menu
-* Rule Variables:: Variables that say how a file is to be viewed.
-* Other Decode Variables:: Other decode variables.
-* Uuencoding and Posting:: Variables for customizing uuencoding.
+* Rule Variables:: Variables that say how a file is to be viewed.
+* Other Decode Variables:: Other decode variables.
+* Uuencoding and Posting:: Variables for customizing uuencoding.
@end menu
@vindex gnus-uu-user-view-rules
@cindex sox
This variable is consulted first when viewing files. If you wish to use,
-for instance, @code{sox} to convert an @samp{.au} sound file, you could
+for instance, @code{sox} to convert an @file{.au} sound file, you could
say something like:
@lisp
(setq gnus-uu-user-view-rules
- (list '(\"\\\\.au$\" \"sox %s -t .aiff > /dev/audio\")))
+ (list '("\\\\.au$" "sox %s -t .aiff > /dev/audio")))
@end lisp
@item gnus-uu-user-view-rules-end
@vindex gnus-uu-user-view-rules-end
-This variable is consulted if Gnus couldn't make any matches from the
+This variable is consulted if gnus couldn't make any matches from the
user and default view rules.
@item gnus-uu-user-archive-rules
@item gnus-uu-ignore-files-by-type
@vindex gnus-uu-ignore-files-by-type
-Files with a @sc{mime} type matching this variable won't be viewed.
+Files with a @acronym{MIME} type matching this variable won't be viewed.
Note that Gnus tries to guess what type the file is based on the name.
-@code{gnus-uu} is not a @sc{mime} package (yet), so this is slightly
+@code{gnus-uu} is not a @acronym{MIME} package (yet), so this is slightly
kludgey.
@item gnus-uu-tmp-dir
@vindex gnus-uu-view-with-metamail
@cindex metamail
Non-@code{nil} means that @code{gnus-uu} will ignore the viewing
-commands defined by the rule variables and just fudge a @sc{mime}
+commands defined by the rule variables and just fudge a @acronym{MIME}
content type based on the file name. The result will be fed to
@code{metamail} for viewing.
Non-@code{nil} means that @code{gnus-uu}, when asked to save without
decoding, will save in digests. If this variable is @code{nil},
@code{gnus-uu} will just save everything in a file without any
-embellishments. The digesting almost conforms to RFC1153---no easy way
+embellishments. The digesting almost conforms to RFC 1153---no easy way
to specify any meaningful volume and issue numbers were found, so I
simply dropped them.
thread. This may not be smart, as no other decoder I have seen is able
to follow threads when collecting uuencoded articles. (Well, I have
seen one package that does that---@code{gnus-uu}, but somehow, I don't
-think that counts...) Default is @code{nil}.
+think that counts@dots{}) Default is @code{nil}.
@item gnus-uu-post-separate-description
@vindex gnus-uu-post-separate-description
@cindex viewing files
@cindex pseudo-articles
-After decoding, if the file is some sort of archive, Gnus will attempt
+After decoding, if the file is some sort of archive, gnus will attempt
to unpack the archive and see if any of the files in the archive can be
viewed. For instance, if you have a gzipped tar file @file{pics.tar.gz}
-containing the files @file{pic1.jpg} and @file{pic2.gif}, Gnus will
+containing the files @file{pic1.jpg} and @file{pic2.gif}, gnus will
uncompress and de-tar the main file, and then view the two pictures.
This unpacking process is recursive, so if the archive contains archives
of archives, it'll all be unpacked.
-Finally, Gnus will normally insert a @dfn{pseudo-article} for each
+Finally, gnus will normally insert a @dfn{pseudo-article} for each
extracted file into the summary buffer. If you go to these
``articles'', you will be prompted for a command to run (usually Gnus
will make a suggestion), and then the command will be run.
these articles easier.
@menu
-* Article Highlighting:: You want to make the article look like fruit salad.
-* Article Fontisizing:: Making emphasized text look nice.
-* Article Hiding:: You also want to make certain info go away.
-* Article Washing:: Lots of way-neat functions to make life better.
-* Article Buttons:: Click on URLs, Message-IDs, addresses and the like.
-* Article Date:: Grumble, UT!
-* Article Signature:: What is a signature?
+* Article Highlighting:: You want to make the article look like fruit salad.
+* Article Fontisizing:: Making emphasized text look nice.
+* Article Hiding:: You also want to make certain info go away.
+* Article Washing:: Lots of way-neat functions to make life better.
+* Article Header:: Doing various header transformations.
+* Article Buttons:: Click on URLs, Message-IDs, addresses and the like.
+* Article Button Levels:: Controlling appearance of buttons.
+* Article Date:: Grumble, UT!
+* Article Display:: Display various stuff---X-Face, Picons, Smileys
+* Article Signature:: What is a signature?
+* Article Miscellanea:: Various other stuff.
@end menu
@vindex gnus-header-face-alist
Highlight the headers (@code{gnus-article-highlight-headers}). The
highlighting will be done according to the @code{gnus-header-face-alist}
-variable, which is a list where each element has the form @var{(regexp
-name content)}. @var{regexp} is a regular expression for matching the
+variable, which is a list where each element has the form
+@code{(@var{regexp} @var{name} @var{content})}.
+@var{regexp} is a regular expression for matching the
header, @var{name} is the face used for highlighting the header name
(@pxref{Faces and Fonts}) and @var{content} is the face for highlighting
the header value. The first match made will be used. Note that
If the article size if bigger than this variable (which is 25000 by
default), no citation highlighting will be performed.
-@item gnus-cite-prefix-regexp
-@vindex gnus-cite-prefix-regexp
-Regexp matching the longest possible citation prefix on a line.
-
@item gnus-cite-max-prefix
@vindex gnus-cite-max-prefix
Maximum possible length for a citation prefix (default 20).
@vindex gnus-cite-face-list
List of faces used for highlighting citations (@pxref{Faces and Fonts}).
When there are citations from multiple articles in the same message,
-Gnus will try to give each citation from each article its own face.
+gnus will try to give each citation from each article its own face.
This should make it easier to see who wrote what.
@item gnus-supercite-regexp
@end table
-@xref{Customizing Articles} for how to highlight articles automatically.
+@xref{Customizing Articles}, for how to highlight articles automatically.
@node Article Fontisizing
@findex gnus-article-emphasize
@kindex W e (Summary)
People commonly add emphasis to words in news articles by writing things
-like @samp{_this_} or @samp{*this*}. Gnus can make this look nicer by
-running the article through the @kbd{W e}
+like @samp{_this_} or @samp{*this*} or @samp{/this/}. Gnus can make
+this look nicer by running the article through the @kbd{W e}
(@code{gnus-article-emphasize}) command.
@vindex gnus-emphasis-alist
highlighting.
@lisp
-(setq gnus-article-emphasis
+(setq gnus-emphasis-alist
'(("_\\(\\w+\\)_" 0 1 gnus-emphasis-underline)
("\\*\\(\\w+\\)\\*" 0 1 gnus-emphasis-bold)))
@end lisp
+@cindex slash
+@cindex asterisk
+@cindex underline
+@cindex /
+@cindex *
+
@vindex gnus-emphasis-underline
@vindex gnus-emphasis-bold
@vindex gnus-emphasis-italic
(copy-face 'red 'gnus-emphasis-italic)
@end lisp
-@xref{Customizing Articles} for how to fontize articles automatically.
+@vindex gnus-group-highlight-words-alist
+
+If you want to highlight arbitrary words, you can use the
+@code{gnus-group-highlight-words-alist} variable, which uses the same
+syntax as @code{gnus-emphasis-alist}. The @code{highlight-words} group
+parameter (@pxref{Group Parameters}) can also be used.
+
+@xref{Customizing Articles}, for how to fontize articles automatically.
@node Article Hiding
@findex gnus-article-hide
Do quite a lot of hiding on the article buffer
(@kbd{gnus-article-hide}). In particular, this function will hide
-headers, PGP, cited text and the signature.
+headers, @acronym{PGP}, cited text and the signature.
@item W W h
@kindex W W h (Summary)
Hide signature (@code{gnus-article-hide-signature}). @xref{Article
Signature}.
-@item W W p
-@kindex W W p (Summary)
-@findex gnus-article-hide-pgp
-@vindex gnus-article-hide-pgp-hook
-Hide @sc{pgp} signatures (@code{gnus-article-hide-pgp}). The
-@code{gnus-article-hide-pgp-hook} hook will be run after a @sc{pgp}
-signature has been hidden. For example, to automatically verify
-articles that have signatures in them do:
-@lisp
-;;; Hide pgp cruft if any.
+@item W W l
+@kindex W W l (Summary)
+@findex gnus-article-hide-list-identifiers
+@vindex gnus-list-identifiers
+Strip list identifiers specified in @code{gnus-list-identifiers}. These
+are strings some mailing list servers add to the beginning of all
+@code{Subject} headers---for example, @samp{[zebra 4711]}. Any leading
+@samp{Re: } is skipped before stripping. @code{gnus-list-identifiers}
+may not contain @code{\\(..\\)}.
-(setq gnus-treat-strip-pgp t)
+@table @code
-;;; After hiding pgp, verify the message;
-;;; only happens if pgp signature is found.
+@item gnus-list-identifiers
+@vindex gnus-list-identifiers
+A regular expression that matches list identifiers to be removed from
+subject. This can also be a list of regular expressions.
-(add-hook 'gnus-article-hide-pgp-hook
- (lambda ()
- (save-excursion
- (set-buffer gnus-original-article-buffer)
- (mc-verify))))
-@end lisp
+@end table
@item W W P
@kindex W W P (Summary)
@findex gnus-article-hide-pem
-Hide @sc{pem} (privacy enhanced messages) cruft
+Hide @acronym{PEM} (privacy enhanced messages) cruft
(@code{gnus-article-hide-pem}).
+@item W W B
+@kindex W W B (Summary)
+@findex gnus-article-strip-banner
+@vindex gnus-article-banner-alist
+@vindex gnus-article-address-banner-alist
+@cindex banner
+@cindex OneList
+@cindex stripping advertisements
+@cindex advertisements
+Strip the banner specified by the @code{banner} group parameter
+(@code{gnus-article-strip-banner}). This is mainly used to hide those
+annoying banners and/or signatures that some mailing lists and moderated
+groups adds to all the messages. The way to use this function is to add
+the @code{banner} group parameter (@pxref{Group Parameters}) to the
+group you want banners stripped from. The parameter either be a string,
+which will be interpreted as a regular expression matching text to be
+removed, or the symbol @code{signature}, meaning that the (last)
+signature should be removed, or other symbol, meaning that the
+corresponding regular expression in @code{gnus-article-banner-alist} is
+used.
+
+Regardless of a group, you can hide things like advertisements only when
+the sender of an article has a certain mail address specified in
+@code{gnus-article-address-banner-alist}.
+
+@table @code
+
+@item gnus-article-address-banner-alist
+@vindex gnus-article-address-banner-alist
+Alist of mail addresses and banners. Each element has the form
+@code{(@var{address} . @var{banner})}, where @var{address} is a regexp
+matching a mail address in the From header, @var{banner} is one of a
+symbol @code{signature}, an item in @code{gnus-article-banner-alist},
+a regexp and @code{nil}. If @var{address} matches author's mail
+address, it will remove things like advertisements. For example, if a
+sender has the mail address @samp{hail@@yoo-hoo.co.jp} and there is a
+banner something like @samp{Do You Yoo-hoo!?} in all articles he
+sends, you can use the following element to remove them:
+
+@lisp
+("@@yoo-hoo\\.co\\.jp\\'" .
+ "\n_+\nDo You Yoo-hoo!\\?\n.*\n.*\n")
+@end lisp
+
+@end table
+
@item W W c
@kindex W W c (Summary)
@findex gnus-article-hide-citation
@item gnus-cited-lines-visible
@vindex gnus-cited-lines-visible
-The number of lines at the beginning of the cited text to leave shown.
+The number of lines at the beginning of the cited text to leave
+shown. This can also be a cons cell with the number of lines at the top
+and bottom of the text, respectively, to remain visible.
@end table
Also @pxref{Article Highlighting} for further variables for
citation customization.
-@xref{Customizing Articles} for how to hide article elements
+@xref{Customizing Articles}, for how to hide article elements
automatically.
something else'', but normally results in something looking better.
Cleaner, perhaps.
+@xref{Customizing Articles}, if you want to change how Gnus displays
+articles by default.
+
@table @kbd
+@item C-u g
+This is not really washing, it's sort of the opposite of washing. If
+you type this, you see the article exactly as it exists on disk or on
+the server.
+
+@item g
+Force redisplaying of the current article
+(@code{gnus-summary-show-article}). This is also not really washing.
+If you type this, you see the article without any previously applied
+interactive Washing functions but with all default treatments
+(@pxref{Customizing Articles}).
+
@item W l
@kindex W l (Summary)
@findex gnus-summary-stop-page-breaking
Remove page breaks from the current article
-(@code{gnus-summary-stop-page-breaking}). @xref{Misc Article} for page
+(@code{gnus-summary-stop-page-breaking}). @xref{Misc Article}, for page
delimiters.
@item W r
#15). It is sometimes referred to as ``Caesar rotate'' because Caesar
is rumored to have employed this form of, uh, somewhat weak encryption.
+@item W m
+@kindex W m (Summary)
+@findex gnus-summary-morse-message
+Morse decode the article buffer (@code{gnus-summary-morse-message}).
+
@item W t
+@item t
@kindex W t (Summary)
+@kindex t (Summary)
@findex gnus-summary-toggle-header
Toggle whether to display all headers in the article buffer
(@code{gnus-summary-toggle-header}).
@item W v
@kindex W v (Summary)
-@findex gnus-summary-verbose-header
+@findex gnus-summary-verbose-headers
Toggle whether to display all headers in the article buffer permanently
-(@code{gnus-summary-verbose-header}).
+(@code{gnus-summary-verbose-headers}).
+
+@item W m
+@kindex W m (Summary)
+@findex gnus-summary-toggle-mime
+Toggle whether to run the article through @acronym{MIME} before
+displaying (@code{gnus-summary-toggle-mime}).
@item W o
@kindex W o (Summary)
@findex gnus-article-treat-dumbquotes
@vindex gnus-article-dumbquotes-map
@cindex Smartquotes
-@cindex M******** sm*rtq**t*s
+@cindex M****s*** sm*rtq**t*s
@cindex Latin 1
-Treat M******** sm*rtq**t*s according to
+Treat M****s*** sm*rtq**t*s according to
@code{gnus-article-dumbquotes-map}
(@code{gnus-article-treat-dumbquotes}). Note that this function guesses
whether a character is a sm*rtq**t* or not, so it should only be used
interactively.
+Sm*rtq**t*s are M****s***'s unilateral extension to the character map in
+an attempt to provide more quoting characters. If you see something
+like @code{\222} or @code{\264} where you're expecting some kind of
+apostrophe or quotation mark, then try this wash.
+
+@item W Y f
+@kindex W Y f (Summary)
+@findex gnus-article-outlook-deuglify-article
+@cindex Outlook Express
+Full deuglify of broken Outlook (Express) articles: Treat dumbquotes,
+unwrap lines, repair attribution and rearrange citation.
+(@code{gnus-article-outlook-deuglify-article}).
+
+@item W Y u
+@kindex W Y u (Summary)
+@findex gnus-article-outlook-unwrap-lines
+@vindex gnus-outlook-deuglify-unwrap-min
+@vindex gnus-outlook-deuglify-unwrap-max
+Unwrap lines that appear to be wrapped citation lines. You can control
+what lines will be unwrapped by frobbing
+@code{gnus-outlook-deuglify-unwrap-min} and
+@code{gnus-outlook-deuglify-unwrap-max}, indicating the minimum and
+maximum length of an unwrapped citation line.
+(@code{gnus-article-outlook-unwrap-lines}).
+
+@item W Y a
+@kindex W Y a (Summary)
+@findex gnus-article-outlook-repair-attribution
+Repair a broken attribution line.@*
+(@code{gnus-article-outlook-repair-attribution}).
+
+@item W Y c
+@kindex W Y c (Summary)
+@findex gnus-article-outlook-rearrange-citation
+Repair broken citations by rearranging the text.
+(@code{gnus-article-outlook-rearrange-citation}).
+
@item W w
@kindex W w (Summary)
@findex gnus-article-fill-cited-article
You can give the command a numerical prefix to specify the width to use
when filling.
+@item W Q
+@kindex W Q (Summary)
+@findex gnus-article-fill-long-lines
+Fill long lines (@code{gnus-article-fill-long-lines}).
+
+@item W C
+@kindex W C (Summary)
+@findex gnus-article-capitalize-sentences
+Capitalize the first word in each sentence
+(@code{gnus-article-capitalize-sentences}).
+
@item W c
@kindex W c (Summary)
@findex gnus-article-remove-cr
CRs into LF (this takes care of Mac line endings)
(@code{gnus-article-remove-cr}).
-@item W q
@kindex W q (Summary)
@findex gnus-article-de-quoted-unreadable
Treat quoted-printable (@code{gnus-article-de-quoted-unreadable}).
-Quoted-Printable is one common @sc{mime} encoding employed when sending
-non-ASCII (i. e., 8-bit) articles. It typically makes strings like
-@samp{déjà vu} look like @samp{d=E9j=E0 vu}, which doesn't look very
-readable to me. Note that the this is usually done automatically by
-Gnus if the message in question has a @code{Content-Transfer-Encoding}
-header that says that this encoding has been done.
+Quoted-Printable is one common @acronym{MIME} encoding employed when
+sending non-@acronym{ASCII} (i.e., 8-bit) articles. It typically
+makes strings like @samp{d@'ej@`a vu} look like @samp{d=E9j=E0 vu},
+which doesn't look very readable to me. Note that this is usually
+done automatically by Gnus if the message in question has a
+@code{Content-Transfer-Encoding} header that says that this encoding
+has been done. If a prefix is given, a charset will be asked for.
+
+@item W 6
+@kindex W 6 (Summary)
+@findex gnus-article-de-base64-unreadable
+Treat base64 (@code{gnus-article-de-base64-unreadable}). Base64 is
+one common @acronym{MIME} encoding employed when sending
+non-@acronym{ASCII} (i.e., 8-bit) articles. Note that this is
+usually done automatically by Gnus if the message in question has a
+@code{Content-Transfer-Encoding} header that says that this encoding
+has been done. If a prefix is given, a charset will be asked for.
+
+@item W Z
+@kindex W Z (Summary)
+@findex gnus-article-decode-HZ
+Treat HZ or HZP (@code{gnus-article-decode-HZ}). HZ (or HZP) is one
+common encoding employed when sending Chinese articles. It typically
+makes strings look like @samp{~@{<:Ky2;S@{#,NpJ)l6HK!#~@}}.
+
+@item W A
+@kindex W A (Summary)
+@findex gnus-article-treat-ansi-sequences
+@cindex @acronym{ANSI} control sequences
+Translate @acronym{ANSI} SGR control sequences into overlays or
+extents (@code{gnus-article-treat-ansi-sequences}). @acronym{ANSI}
+sequences are used in some Chinese hierarchies for highlighting.
+
+@item W u
+@kindex W u (Summary)
+@findex gnus-article-unsplit-urls
+Remove newlines from within URLs. Some mailers insert newlines into
+outgoing email messages to keep lines short. This reformatting can
+split long URLs onto multiple lines. Repair those URLs by removing
+the newlines (@code{gnus-article-unsplit-urls}).
+
+@item W h
+@kindex W h (Summary)
+@findex gnus-article-wash-html
+Treat @acronym{HTML} (@code{gnus-article-wash-html}). Note that this is
+usually done automatically by Gnus if the message in question has a
+@code{Content-Type} header that says that the message is @acronym{HTML}.
+
+If a prefix is given, a charset will be asked for.
+
+@vindex gnus-article-wash-function
+The default is to use the function specified by
+@code{mm-text-html-renderer} (@pxref{Display Customization, ,Display
+Customization, emacs-mime, The Emacs MIME Manual}) to convert the
+@acronym{HTML}, but this is controlled by the
+@code{gnus-article-wash-function} variable. Pre-defined functions you
+can use include:
-@item W f
-@kindex W f (Summary)
-@cindex x-face
-@findex gnus-article-display-x-face
-@findex gnus-article-x-face-command
-@vindex gnus-article-x-face-command
-@vindex gnus-article-x-face-too-ugly
-@iftex
-@iflatex
-\include{xface}
-@end iflatex
-@end iftex
-Look for and display any X-Face headers
-(@code{gnus-article-display-x-face}). The command executed by this
-function is given by the @code{gnus-article-x-face-command} variable.
-If this variable is a string, this string will be executed in a
-sub-shell. If it is a function, this function will be called with the
-face as the argument. If the @code{gnus-article-x-face-too-ugly} (which
-is a regexp) matches the @code{From} header, the face will not be shown.
-The default action under Emacs is to fork off an @code{xv} to view the
-face; under XEmacs the default action is to display the face before the
-@code{From} header. (It's nicer if XEmacs has been compiled with X-Face
-support---that will make display somewhat faster. If there's no native
-X-Face support, Gnus will try to convert the @code{X-Face} header using
-external programs from the @code{pbmplus} package and friends.) If you
-want to have this function in the display hook, it should probably come
-last.
+@table @code
+@item w3
+Use Emacs/w3.
+
+@item w3m
+Use @uref{http://emacs-w3m.namazu.org/, emacs-w3m}.
+
+@item links
+Use @uref{http://links.sf.net/, Links}.
+
+@item lynx
+Use @uref{http://lynx.isc.org/, Lynx}.
+
+@item html2text
+Use html2text---a simple @acronym{HTML} converter included with Gnus.
+
+@end table
@item W b
@kindex W b (Summary)
Add clickable buttons to the article headers
(@code{gnus-article-add-buttons-to-head}).
+@item W p
+@kindex W p (Summary)
+@findex gnus-article-verify-x-pgp-sig
+Verify a signed control message
+(@code{gnus-article-verify-x-pgp-sig}). Control messages such as
+@code{newgroup} and @code{checkgroups} are usually signed by the
+hierarchy maintainer. You need to add the @acronym{PGP} public key of
+the maintainer to your keyring to verify the
+message.@footnote{@acronym{PGP} keys for many hierarchies are
+available at @uref{ftp://ftp.isc.org/pub/pgpcontrol/README.html}}
+
+@item W s
+@kindex W s (Summary)
+@findex gnus-summary-force-verify-and-decrypt
+Verify a signed (@acronym{PGP}, @acronym{PGP/MIME} or
+@acronym{S/MIME}) message
+(@code{gnus-summary-force-verify-and-decrypt}). @xref{Security}.
+
+@item W a
+@kindex W a (Summary)
+@findex gnus-article-strip-headers-in-body
+Strip headers like the @code{X-No-Archive} header from the beginning of
+article bodies (@code{gnus-article-strip-headers-in-body}).
+
@item W E l
@kindex W E l (Summary)
@findex gnus-article-strip-leading-blank-lines
@end table
-@xref{Customizing Articles} for how to wash articles automatically.
+@xref{Customizing Articles}, for how to wash articles automatically.
+
+
+@node Article Header
+@subsection Article Header
+
+These commands perform various transformations of article header.
+
+@table @kbd
+
+@item W G u
+@kindex W G u (Summary)
+@findex gnus-article-treat-unfold-headers
+Unfold folded header lines (@code{gnus-article-treat-unfold-headers}).
+
+@item W G n
+@kindex W G n (Summary)
+@findex gnus-article-treat-fold-newsgroups
+Fold the @code{Newsgroups} and @code{Followup-To} headers
+(@code{gnus-article-treat-fold-newsgroups}).
+
+@item W G f
+@kindex W G f (Summary)
+@findex gnus-article-treat-fold-headers
+Fold all the message headers
+(@code{gnus-article-treat-fold-headers}).
+
+@item W E w
+@kindex W E w (Summary)
+@findex gnus-article-remove-leading-whitespace
+Remove excessive whitespace from all headers
+(@code{gnus-article-remove-leading-whitespace}).
+
+@end table
@node Article Buttons
with the minimum of fuzz when you hit @kbd{RET} or use the middle mouse
button on these references.
+@vindex gnus-button-man-handler
Gnus adds @dfn{buttons} to certain standard references by default:
-Well-formed URLs, mail addresses and Message-IDs. This is controlled by
-two variables, one that handles article bodies and one that handles
-article heads:
+Well-formed URLs, mail addresses, Message-IDs, Info links, man pages and
+Emacs or Gnus related references. This is controlled by two variables,
+one that handles article bodies and one that handles article heads:
@table @code
This is an alist where each entry has this form:
@lisp
-(REGEXP BUTTON-PAR USE-P FUNCTION DATA-PAR)
+(@var{regexp} @var{button-par} @var{use-p} @var{function} @var{data-par})
@end lisp
@table @var
@item regexp
-All text that match this regular expression will be considered an
-external reference. Here's a typical regexp that matches embedded URLs:
-@samp{<URL:\\([^\n\r>]*\\)>}.
+All text that match this regular expression (case insensitive) will be
+considered an external reference. Here's a typical regexp that matches
+embedded URLs: @samp{<URL:\\([^\n\r>]*\\)>}. This can also be a
+variable containing a regexp, useful variables to use include
+@code{gnus-button-url-regexp} and @code{gnus-button-mid-or-mail-regexp}.
@item button-par
Gnus has to know which parts of the matches is to be highlighted. This
@item use-p
This form will be @code{eval}ed, and if the result is non-@code{nil},
this is considered a match. This is useful if you want extra sifting to
-avoid false matches.
+avoid false matches. Often variables named
+@code{gnus-button-@var{*}-level} are used here, @xref{Article Button
+Levels}, but any other form may be used too.
+
+@c @code{use-p} is @code{eval}ed only if @code{regexp} matches.
@item function
This function will be called when you click on this button.
used to say what headers to apply the buttonize coding to:
@lisp
-(HEADER REGEXP BUTTON-PAR USE-P FUNCTION DATA-PAR)
+(@var{header} @var{regexp} @var{button-par} @var{use-p} @var{function} @var{data-par})
@end lisp
-@var{HEADER} is a regular expression.
+@var{header} is a regular expression.
+@end table
+
+@subsubsection Related variables and functions
+
+@table @code
+@item gnus-button-@var{*}-level
+@xref{Article Button Levels}.
+
+@c Stuff related to gnus-button-browse-level
@item gnus-button-url-regexp
@vindex gnus-button-url-regexp
A regular expression that matches embedded URLs. It is used in the
default values of the variables above.
+@c Stuff related to gnus-button-man-level
+
+@item gnus-button-man-handler
+@vindex gnus-button-man-handler
+The function to use for displaying man pages. It must take at least one
+argument with a string naming the man page.
+
+@c Stuff related to gnus-button-message-level
+
+@item gnus-button-mid-or-mail-regexp
+@vindex gnus-button-mid-or-mail-regexp
+Regular expression that matches a message ID or a mail address.
+
+@item gnus-button-prefer-mid-or-mail
+@vindex gnus-button-prefer-mid-or-mail
+This variable determines what to do when the button on a string as
+@samp{foo123@@bar.invalid} is pushed. Strings like this can be either a
+message ID or a mail address. If it is one of the symbols @code{mid} or
+@code{mail}, Gnus will always assume that the string is a message ID or
+a mail address, respectively. If this variable is set to the symbol
+@code{ask}, always query the user what do do. If it is a function, this
+function will be called with the string as its only argument. The
+function must return @code{mid}, @code{mail}, @code{invalid} or
+@code{ask}. The default value is the function
+@code{gnus-button-mid-or-mail-heuristic}.
+
+@item gnus-button-mid-or-mail-heuristic
+@findex gnus-button-mid-or-mail-heuristic
+Function that guesses whether its argument is a message ID or a mail
+address. Returns @code{mid} if it's a message IDs, @code{mail} if
+it's a mail address, @code{ask} if unsure and @code{invalid} if the
+string is invalid.
+
+@item gnus-button-mid-or-mail-heuristic-alist
+@vindex gnus-button-mid-or-mail-heuristic-alist
+An alist of @code{(RATE . REGEXP)} pairs used by the function
+@code{gnus-button-mid-or-mail-heuristic}.
+
+@c Stuff related to gnus-button-tex-level
+
+@item gnus-button-ctan-handler
+@findex gnus-button-ctan-handler
+The function to use for displaying CTAN links. It must take one
+argument, the string naming the URL.
+
+@item gnus-ctan-url
+@vindex gnus-ctan-url
+Top directory of a CTAN (Comprehensive TeX Archive Network) archive used
+by @code{gnus-button-ctan-handler}.
+
+@c Misc stuff
+
@item gnus-article-button-face
@vindex gnus-article-button-face
Face used on buttons.
@end table
-@xref{Customizing Articles} for how to buttonize articles automatically.
+@xref{Customizing Articles}, for how to buttonize articles automatically.
+
+
+@node Article Button Levels
+@subsection Article button levels
+@cindex button levels
+The higher the value of the variables @code{gnus-button-@var{*}-level},
+the more buttons will appear. If the level is zero, no corresponding
+buttons are displayed. With the default value (which is 5) you should
+already see quite a lot of buttons. With higher levels, you will see
+more buttons, but you may also get more false positives. To avoid them,
+you can set the variables @code{gnus-button-@var{*}-level} local to
+specific groups (@pxref{Group Parameters}). Here's an example for the
+variable @code{gnus-parameters}:
+
+@lisp
+;; @r{increase @code{gnus-button-*-level} in some groups:}
+(setq gnus-parameters
+ '(("\\<\\(emacs\\|gnus\\)\\>" (gnus-button-emacs-level 10))
+ ("\\<unix\\>" (gnus-button-man-level 10))
+ ("\\<tex\\>" (gnus-button-tex-level 10))))
+@end lisp
+
+@table @code
+
+@item gnus-button-browse-level
+@vindex gnus-button-browse-level
+Controls the display of references to message IDs, mail addresses and
+news URLs. Related variables and functions include
+@code{gnus-button-url-regexp}, @code{browse-url}, and
+@code{browse-url-browser-function}.
+
+@item gnus-button-emacs-level
+@vindex gnus-button-emacs-level
+Controls the display of Emacs or Gnus references. Related functions are
+@code{gnus-button-handle-custom},
+@code{gnus-button-handle-describe-function},
+@code{gnus-button-handle-describe-variable},
+@code{gnus-button-handle-symbol},
+@code{gnus-button-handle-describe-key},
+@code{gnus-button-handle-apropos},
+@code{gnus-button-handle-apropos-command},
+@code{gnus-button-handle-apropos-variable},
+@code{gnus-button-handle-apropos-documentation}, and
+@code{gnus-button-handle-library}.
+
+@item gnus-button-man-level
+@vindex gnus-button-man-level
+Controls the display of references to (Unix) man pages.
+See @code{gnus-button-man-handler}.
+
+@item gnus-button-message-level
+@vindex gnus-button-message-level
+Controls the display of message IDs, mail addresses and news URLs.
+Related variables and functions include
+@code{gnus-button-mid-or-mail-regexp},
+@code{gnus-button-prefer-mid-or-mail},
+@code{gnus-button-mid-or-mail-heuristic}, and
+@code{gnus-button-mid-or-mail-heuristic-alist}.
+
+@item gnus-button-tex-level
+@vindex gnus-button-tex-level
+Controls the display of references to @TeX{} or LaTeX stuff, e.g. for CTAN
+URLs. See the variables @code{gnus-ctan-url},
+@code{gnus-button-ctan-handler},
+@code{gnus-button-ctan-directory-regexp}, and
+@code{gnus-button-handle-ctan-bogus-regexp}.
+
+@end table
@node Article Date
@findex gnus-article-date-local
Display the date in the local timezone (@code{gnus-article-date-local}).
+@item W T p
+@kindex W T p (Summary)
+@findex gnus-article-date-english
+Display the date in a format that's easily pronounceable in English
+(@code{gnus-article-date-english}).
+
@item W T s
@kindex W T s (Summary)
@vindex gnus-article-time-format
@findex gnus-start-date-timer
@findex gnus-stop-date-timer
Say how much time has elapsed between the article was posted and now
-(@code{gnus-article-date-lapsed}). If you want to have this line
-updated continually, you can put
+(@code{gnus-article-date-lapsed}). It looks something like:
+
+@example
+X-Sent: 6 weeks, 4 days, 1 hour, 3 minutes, 8 seconds ago
+@end example
+
+@vindex gnus-article-date-lapsed-new-header
+The value of @code{gnus-article-date-lapsed-new-header} determines
+whether this header will just be added below the old Date one, or will
+replace it.
+
+An advantage of using Gnus to read mail is that it converts simple bugs
+into wonderful absurdities.
+
+If you want to have this line updated continually, you can put
@lisp
(gnus-start-date-timer)
@end lisp
-in your @file{.gnus.el} file, or you can run it off of some hook. If
+in your @file{~/.gnus.el} file, or you can run it off of some hook. If
you want to stop the timer, you can use the @code{gnus-stop-date-timer}
command.
@end table
-@xref{Customizing Articles} for how to display the date in your
+@xref{Customizing Articles}, for how to display the date in your
preferred format automatically.
+@node Article Display
+@subsection Article Display
+@cindex picons
+@cindex x-face
+@cindex smileys
+
+These commands add various frivolous display gimmicks to the article
+buffer in Emacs versions that support them.
+
+@code{X-Face} headers are small black-and-white images supplied by the
+message headers (@pxref{X-Face}).
+
+@code{Face} headers are small colored images supplied by the message
+headers (@pxref{Face}).
+
+Smileys are those little @samp{:-)} symbols that people like to litter
+their messages with (@pxref{Smileys}).
+
+Picons, on the other hand, reside on your own system, and Gnus will
+try to match the headers to what you have (@pxref{Picons}).
+
+All these functions are toggles---if the elements already exist,
+they'll be removed.
+
+@table @kbd
+@item W D x
+@kindex W D x (Summary)
+@findex gnus-article-display-x-face
+Display an @code{X-Face} in the @code{From} header.
+(@code{gnus-article-display-x-face}).
+
+@item W D d
+@kindex W D d (Summary)
+@findex gnus-article-display-face
+Display a @code{Face} in the @code{From} header.
+(@code{gnus-article-display-face}).
+
+@item W D s
+@kindex W D s (Summary)
+@findex gnus-treat-smiley
+Display smileys (@code{gnus-treat-smiley}).
+
+@item W D f
+@kindex W D f (Summary)
+@findex gnus-treat-from-picon
+Piconify the @code{From} header (@code{gnus-treat-from-picon}).
+
+@item W D m
+@kindex W D m (Summary)
+@findex gnus-treat-mail-picon
+Piconify all mail headers (i. e., @code{Cc}, @code{To})
+(@code{gnus-treat-mail-picon}).
+
+@item W D n
+@kindex W D n (Summary)
+@findex gnus-treat-newsgroups-picon
+Piconify all news headers (i. e., @code{Newsgroups} and
+@code{Followup-To}) (@code{gnus-treat-newsgroups-picon}).
+
+@item W D D
+@kindex W D D (Summary)
+@findex gnus-article-remove-images
+Remove all images from the article buffer
+(@code{gnus-article-remove-images}).
+
+@end table
+
+
+
@node Article Signature
@subsection Article Signature
@cindex signatures
@lisp
(setq gnus-signature-separator
- '("^-- $" ; The standard
- "^-- *$" ; A common mangling
- "^-------*$" ; Many people just use a looong
- ; line of dashes. Shame!
- "^ *--------*$" ; Double-shame!
- "^________*$" ; Underscores are also popular
- "^========*$")) ; Pervert!
+ '("^-- $" ; @r{The standard}
+ "^-- *$" ; @r{A common mangling}
+ "^-------*$" ; @r{Many people just use a looong}
+ ; @r{line of dashes. Shame!}
+ "^ *--------*$" ; @r{Double-shame!}
+ "^________*$" ; @r{Underscores are also popular}
+ "^========*$")) ; @r{Pervert!}
@end lisp
The more permissive you are, the more likely it is that you'll get false
@vindex gnus-signature-limit
@code{gnus-signature-limit} provides a limit to what is considered a
-signature.
+signature when displaying articles.
@enumerate
@item
signature after all.
+@node Article Miscellanea
+@subsection Article Miscellanea
+
+@table @kbd
+@item A t
+@kindex A t (Summary)
+@findex gnus-article-babel
+Translate the article from one language to another
+(@code{gnus-article-babel}).
+
+@end table
+
+
@node MIME Commands
@section MIME Commands
@cindex MIME decoding
+@cindex attachments
+@cindex viewing attachments
+
+The following commands all understand the numerical prefix. For
+instance, @kbd{3 b} means ``view the third @acronym{MIME} part''.
+
+@table @kbd
+@item b
+@itemx K v
+@kindex b (Summary)
+@kindex K v (Summary)
+View the @acronym{MIME} part.
+
+@item K o
+@kindex K o (Summary)
+Save the @acronym{MIME} part.
+
+@item K c
+@kindex K c (Summary)
+Copy the @acronym{MIME} part.
+
+@item K e
+@kindex K e (Summary)
+View the @acronym{MIME} part externally.
+
+@item K i
+@kindex K i (Summary)
+View the @acronym{MIME} part internally.
+
+@item K |
+@kindex K | (Summary)
+Pipe the @acronym{MIME} part to an external command.
+@end table
+
+The rest of these @acronym{MIME} commands do not use the numerical prefix in
+the same manner:
@table @kbd
+@item K b
+@kindex K b (Summary)
+Make all the @acronym{MIME} parts have buttons in front of them. This is
+mostly useful if you wish to save (or perform other actions) on inlined
+parts.
+
+@item K m
+@kindex K m (Summary)
+@findex gnus-summary-repair-multipart
+Some multipart messages are transmitted with missing or faulty headers.
+This command will attempt to ``repair'' these messages so that they can
+be viewed in a more pleasant manner
+(@code{gnus-summary-repair-multipart}).
+
+@item X m
+@kindex X m (Summary)
+@findex gnus-summary-save-parts
+Save all parts matching a @acronym{MIME} type to a directory
+(@code{gnus-summary-save-parts}). Understands the process/prefix
+convention (@pxref{Process/Prefix}).
+
@item M-t
@kindex M-t (Summary)
-@findex gnus-summary-display-buttonized
+@findex gnus-summary-toggle-display-buttonized
Toggle the buttonized display of the article buffer
(@code{gnus-summary-toggle-display-buttonized}).
@item W M w
@kindex W M w (Summary)
-Decode RFC2047-encoded words in the article headers
+@findex gnus-article-decode-mime-words
+Decode RFC 2047-encoded words in the article headers
(@code{gnus-article-decode-mime-words}).
@item W M c
@kindex W M c (Summary)
+@findex gnus-article-decode-charset
Decode encoded article bodies as well as charsets
(@code{gnus-article-decode-charset}).
This command looks in the @code{Content-Type} header to determine the
charset. If there is no such header in the article, you can give it a
prefix, which will prompt for the charset to decode as. In regional
-groups where people post using some common encoding (but do not include
-MIME headers), you can set the @code{charset} group/topic parameter to
-the required charset (@pxref{Group Parameters}).
+groups where people post using some common encoding (but do not
+include @acronym{MIME} headers), you can set the @code{charset} group/topic
+parameter to the required charset (@pxref{Group Parameters}).
@item W M v
@kindex W M v (Summary)
-View all the @sc{mime} parts in the current article
+@findex gnus-mime-view-all-parts
+View all the @acronym{MIME} parts in the current article
(@code{gnus-mime-view-all-parts}).
@end table
@table @code
@item gnus-ignored-mime-types
@vindex gnus-ignored-mime-types
-This is a list of regexps. @sc{mime} types that match a regexp from
+This is a list of regexps. @acronym{MIME} types that match a regexp from
this list will be completely ignored by Gnus. The default value is
@code{nil}.
'("text/x-vcard"))
@end lisp
+@item gnus-article-loose-mime
+@vindex gnus-article-loose-mime
+If non-@code{nil}, Gnus won't require the @samp{MIME-Version} header
+before interpreting the message as a @acronym{MIME} message. This helps
+when reading messages from certain broken mail user agents. The
+default is @code{nil}.
+
+@item gnus-article-emulate-mime
+@vindex gnus-article-emulate-mime
+There are other, non-@acronym{MIME} encoding methods used. The most common
+is @samp{uuencode}, but yEncode is also getting to be popular. If
+this variable is non-@code{nil}, Gnus will look in message bodies to
+see if it finds these encodings, and if so, it'll run them through the
+Gnus @acronym{MIME} machinery. The default is @code{t}.
+
@item gnus-unbuttonized-mime-types
@vindex gnus-unbuttonized-mime-types
-This is a list of regexps. @sc{mime} types that match a regexp from
-this list won't have @sc{mime} buttons inserted unless they aren't
-displayed. The default value is @code{(".*/.*")}.
+This is a list of regexps. @acronym{MIME} types that match a regexp from
+this list won't have @acronym{MIME} buttons inserted unless they aren't
+displayed or this variable is overridden by
+@code{gnus-buttonized-mime-types}. The default value is
+@code{(".*/.*")}. This variable is only used when
+@code{gnus-inhibit-mime-unbuttonizing} is @code{nil}.
+
+@item gnus-buttonized-mime-types
+@vindex gnus-buttonized-mime-types
+This is a list of regexps. @acronym{MIME} types that match a regexp from
+this list will have @acronym{MIME} buttons inserted unless they aren't
+displayed. This variable overrides
+@code{gnus-unbuttonized-mime-types}. The default value is @code{nil}.
+This variable is only used when @code{gnus-inhibit-mime-unbuttonizing}
+is @code{nil}.
+
+To see e.g. security buttons but no other buttons, you could set this
+variable to @code{("multipart/signed")} and leave
+@code{gnus-unbuttonized-mime-types} at the default value.
+
+@item gnus-inhibit-mime-unbuttonizing
+@vindex gnus-inhibit-mime-unbuttonizing
+If this is non-@code{nil}, then all @acronym{MIME} parts get buttons. The
+default value is @code{nil}.
@item gnus-article-mime-part-function
@vindex gnus-article-mime-part-function
-For each @sc{mime} part, this function will be called with the @sc{mime}
+For each @acronym{MIME} part, this function will be called with the @acronym{MIME}
handle as the parameter. The function is meant to be used to allow
users to gather information from the article (e. g., add Vcard info to
the bbdb database) or to do actions based on parts (e. g., automatically
'my-save-all-jpeg-parts)
@end lisp
+@vindex gnus-mime-multipart-functions
+@item gnus-mime-multipart-functions
+Alist of @acronym{MIME} multipart types and functions to handle them.
+
+@vindex gnus-mime-display-multipart-alternative-as-mixed
+@item gnus-mime-display-multipart-alternative-as-mixed
+Display "multipart/alternative" parts as "multipart/mixed".
+
+@vindex gnus-mime-display-multipart-related-as-mixed
+@item gnus-mime-display-multipart-related-as-mixed
+Display "multipart/related" parts as "multipart/mixed".
+
+If displaying "text/html" is discouraged, see
+@code{mm-discouraged-alternatives} in @ref{Display Customization,
+Display Customization, , emacs-mime, Emacs-Mime Manual}. Images or
+other material inside a "multipart/related" part might be overlooked
+when this variable is nil.
+
+@vindex gnus-mime-display-multipart-as-mixed
+@item gnus-mime-display-multipart-as-mixed
+Display "multipart" parts as "multipart/mixed". If t, it overrides nil
+values of @code{gnus-mime-display-multipart-alternative-as-mixed} and
+@code{gnus-mime-display-multipart-related-as-mixed}.
+
+@vindex mm-file-name-rewrite-functions
+@item mm-file-name-rewrite-functions
+List of functions used for rewriting file names of @acronym{MIME} parts.
+Each function takes a file name as input and returns a file name.
+
+Ready-made functions include@*
+@code{mm-file-name-delete-whitespace},
+@code{mm-file-name-trim-whitespace},
+@code{mm-file-name-collapse-whitespace}, and
+@code{mm-file-name-replace-whitespace}. The later uses the value of
+the variable @code{mm-file-name-replace-whitespace} to replace each
+whitespace character in a file name with that string; default value
+is @code{"_"} (a single underscore).
+@findex mm-file-name-delete-whitespace
+@findex mm-file-name-trim-whitespace
+@findex mm-file-name-collapse-whitespace
+@findex mm-file-name-replace-whitespace
+@vindex mm-file-name-replace-whitespace
+
+The standard functions @code{capitalize}, @code{downcase},
+@code{upcase}, and @code{upcase-initials} may be useful, too.
+
+Everybody knows that whitespace characters in file names are evil,
+except those who don't know. If you receive lots of attachments from
+such unenlightened users, you can make live easier by adding
+
+@lisp
+(setq mm-file-name-rewrite-functions
+ '(mm-file-name-trim-whitespace
+ mm-file-name-collapse-whitespace
+ mm-file-name-replace-whitespace))
+@end lisp
+
+@noindent
+to your @file{~/.gnus.el} file.
+
+@end table
+
+
+@node Charsets
+@section Charsets
+@cindex charsets
+
+People use different charsets, and we have @acronym{MIME} to let us know what
+charsets they use. Or rather, we wish we had. Many people use
+newsreaders and mailers that do not understand or use @acronym{MIME}, and
+just send out messages without saying what character sets they use. To
+help a bit with this, some local news hierarchies have policies that say
+what character set is the default. For instance, the @samp{fj}
+hierarchy uses @code{iso-2022-jp-2}.
+
+@vindex gnus-group-charset-alist
+This knowledge is encoded in the @code{gnus-group-charset-alist}
+variable, which is an alist of regexps (use the first item to match full
+group names) and default charsets to be used when reading these groups.
+
+@vindex gnus-newsgroup-ignored-charsets
+In addition, some people do use soi-disant @acronym{MIME}-aware agents that
+aren't. These blithely mark messages as being in @code{iso-8859-1}
+even if they really are in @code{koi-8}. To help here, the
+@code{gnus-newsgroup-ignored-charsets} variable can be used. The
+charsets that are listed here will be ignored. The variable can be
+set on a group-by-group basis using the group parameters (@pxref{Group
+Parameters}). The default value is @code{(unknown-8bit x-unknown)},
+which includes values some agents insist on having in there.
+
+@vindex gnus-group-posting-charset-alist
+When posting, @code{gnus-group-posting-charset-alist} is used to
+determine which charsets should not be encoded using the @acronym{MIME}
+encodings. For instance, some hierarchies discourage using
+quoted-printable header encoding.
+
+This variable is an alist of regexps and permitted unencoded charsets
+for posting. Each element of the alist has the form @code{(}@var{test
+header body-list}@code{)}, where:
+
+@table @var
+@item test
+is either a regular expression matching the newsgroup header or a
+variable to query,
+@item header
+is the charset which may be left unencoded in the header (@code{nil}
+means encode all charsets),
+@item body-list
+is a list of charsets which may be encoded using 8bit content-transfer
+encoding in the body, or one of the special values @code{nil} (always
+encode using quoted-printable) or @code{t} (always use 8bit).
@end table
+@cindex Russian
+@cindex koi8-r
+@cindex koi8-u
+@cindex iso-8859-5
+@cindex coding system aliases
+@cindex preferred charset
+
+@xref{Encoding Customization, , Encoding Customization, emacs-mime,
+The Emacs MIME Manual}, for additional variables that control which
+MIME charsets are used when sending messages.
+
+Other charset tricks that may be useful, although not Gnus-specific:
+
+If there are several @acronym{MIME} charsets that encode the same Emacs
+charset, you can choose what charset to use by saying the following:
+
+@lisp
+(put-charset-property 'cyrillic-iso8859-5
+ 'preferred-coding-system 'koi8-r)
+@end lisp
+
+This means that Russian will be encoded using @code{koi8-r} instead of
+the default @code{iso-8859-5} @acronym{MIME} charset.
+
+If you want to read messages in @code{koi8-u}, you can cheat and say
+
+@lisp
+(define-coding-system-alias 'koi8-u 'koi8-r)
+@end lisp
+
+This will almost do the right thing.
+
+And finally, to read charsets like @code{windows-1251}, you can say
+something like
+
+@lisp
+(codepage-setup 1251)
+(define-coding-system-alias 'windows-1251 'cp1251)
+@end lisp
+
@node Article Commands
@section Article Commands
@vindex gnus-ps-print-hook
@findex gnus-summary-print-article
Generate and print a PostScript image of the article buffer
-(@code{gnus-summary-print-article}). @code{gnus-ps-print-hook} will be
-run just before printing the buffer.
+(@code{gnus-summary-print-article}). @code{gnus-ps-print-hook} will
+be run just before printing the buffer. An alternative way to print
+article is to use Muttprint (@pxref{Saving Articles}).
@end table
@findex gnus-summary-sort-by-lines
Sort by lines (@code{gnus-summary-sort-by-lines}).
+@item C-c C-s C-c
+@kindex C-c C-s C-c (Summary)
+@findex gnus-summary-sort-by-chars
+Sort by article length (@code{gnus-summary-sort-by-chars}).
+
@item C-c C-s C-i
@kindex C-c C-s C-i (Summary)
@findex gnus-summary-sort-by-score
Sort by score (@code{gnus-summary-sort-by-score}).
+
+@item C-c C-s C-r
+@kindex C-c C-s C-r (Summary)
+@findex gnus-summary-sort-by-random
+Randomize (@code{gnus-summary-sort-by-random}).
+
+@item C-c C-s C-o
+@kindex C-c C-s C-o (Summary)
+@findex gnus-summary-sort-by-original
+Sort using the default sorting method
+(@code{gnus-summary-sort-by-original}).
@end table
These functions will work both when you use threading and when you don't
@findex gnus-summary-refer-parent-article
If you'd like to read the parent of the current article, and it is not
displayed in the summary buffer, you might still be able to. That is,
-if the current group is fetched by @sc{nntp}, the parent hasn't expired
+if the current group is fetched by @acronym{NNTP}, the parent hasn't expired
and the @code{References} in the current article are not mangled, you
can just press @kbd{^} or @kbd{A r}
(@code{gnus-summary-refer-parent-article}). If everything goes well,
If given a positive numerical prefix, fetch that many articles back into
the ancestry. If given a negative numerical prefix, fetch just that
-ancestor. So if you say @kbd{3 ^}, Gnus will fetch the parent, the
+ancestor. So if you say @kbd{3 ^}, gnus will fetch the parent, the
grandparent and the grandgrandparent of the current article. If you say
-@kbd{-3 ^}, Gnus will only fetch the grandgrandparent of the current
+@kbd{-3 ^}, gnus will only fetch the grandgrandparent of the current
article.
@item A R (Summary)
@kindex M-^ (Summary)
@cindex Message-ID
@cindex fetching by Message-ID
-You can also ask the @sc{nntp} server for an arbitrary article, no
+You can also ask the @acronym{NNTP} server for an arbitrary article, no
matter what group it belongs to. @kbd{M-^}
(@code{gnus-summary-refer-article}) will ask you for a
@code{Message-ID}, which is one of those long, hard-to-read thingies
by giving this command a prefix.
@vindex gnus-refer-article-method
-If the group you are reading is located on a backend that does not
+If the group you are reading is located on a back end that does not
support fetching by @code{Message-ID} very well (like @code{nnspool}),
-you can set @code{gnus-refer-article-method} to an @sc{nntp} method. It
-would, perhaps, be best if the @sc{nntp} server you consult is the one
+you can set @code{gnus-refer-article-method} to an @acronym{NNTP} method. It
+would, perhaps, be best if the @acronym{NNTP} server you consult is the one
updating the spool you are reading from, but that's not really
necessary.
-Most of the mail backends support fetching by @code{Message-ID}, but do
-not do a particularly excellent job at it. That is, @code{nnmbox} and
-@code{nnbabyl} are able to locate articles from any groups, while
-@code{nnml} and @code{nnfolder} are only able to locate articles that
-have been posted to the current group. (Anything else would be too time
-consuming.) @code{nnmh} does not support this at all.
+It can also be a list of select methods, as well as the special symbol
+@code{current}, which means to use the current select method. If it
+is a list, Gnus will try all the methods in the list until it finds a
+match.
+
+Here's an example setting that will first try the current method, and
+then ask Google if that fails:
+
+@lisp
+(setq gnus-refer-article-method
+ '(current
+ (nnweb "google" (nnweb-type google))))
+@end lisp
+
+Most of the mail back ends support fetching by @code{Message-ID}, but
+do not do a particularly excellent job at it. That is, @code{nnmbox},
+@code{nnbabyl}, @code{nnmaildir}, @code{nnml}, are able to locate
+articles from any groups, while @code{nnfolder}, and @code{nnimap} are
+only able to locate articles that have been posted to the current
+group. (Anything else would be too time consuming.) @code{nnmh} does
+not support this at all.
@node Alternative Approaches
@section Alternative Approaches
Different people like to read news using different methods. This being
-Gnus, we offer a small selection of minor modes for the summary buffers.
+gnus, we offer a small selection of minor modes for the summary buffers.
@menu
* Pick and Read:: First mark articles and then read them.
(@code{gnus-pick-article-or-thread}). If the variable
@code{gnus-thread-hide-subtree} is true, then this key selects the
entire thread when used at the first article of the thread. Otherwise,
-it selects just the article. If given a numerical prefix, go to that
+it selects just the article. If given a numerical prefix, go to that
thread or article and pick it. (The line number is normally displayed
at the beginning of the summary pick lines.)
@cindex trees
@vindex gnus-use-trees
-If you don't like the normal Gnus summary display, you might try setting
+If you don't like the normal gnus summary display, you might try setting
@code{gnus-use-trees} to @code{t}. This will create (by default) an
additional @dfn{tree buffer}. You can execute all summary mode commands
in the tree buffer.
@item gnus-tree-brackets
@vindex gnus-tree-brackets
This is used for differentiating between ``real'' articles and
-``sparse'' articles. The format is @var{((real-open . real-close)
-(sparse-open . sparse-close) (dummy-open . dummy-close))}, and the
-default is @code{((?[ . ?]) (?( . ?)) (?@{ . ?@}) (?< . ?>))}.
+``sparse'' articles. The format is
+@example
+((@var{real-open} . @var{real-close})
+ (@var{sparse-open} . @var{sparse-close})
+ (@var{dummy-open} . @var{dummy-close}))
+@end example
+and the default is @code{((?[ . ?]) (?( . ?)) (?@{ . ?@}) (?< . ?>))}.
@item gnus-tree-parent-child-edges
@vindex gnus-tree-parent-child-edges
@item gnus-tree-minimize-window
@vindex gnus-tree-minimize-window
-If this variable is non-@code{nil}, Gnus will try to keep the tree
-buffer as small as possible to allow more room for the other Gnus
+If this variable is non-@code{nil}, gnus will try to keep the tree
+buffer as small as possible to allow more room for the other gnus
windows. If this variable is a number, the tree buffer will never be
higher than that number. The default is @code{t}. Note that if you
have several windows displayed side-by-side in a frame and the tree
buffer is one of these, minimizing the tree window will also resize all
other windows displayed next to it.
+You may also wish to add the following hook to keep the window minimized
+at all times:
+
+@lisp
+(add-hook 'gnus-configure-windows-hook
+ 'gnus-tree-perhaps-minimize)
+@end lisp
+
@item gnus-generate-tree-function
@vindex gnus-generate-tree-function
@findex gnus-generate-horizontal-tree
Here's the same thread displayed in a vertical tree buffer:
@example
+@group
@{***@}
|--------------------------\-----\-----\
(***) [Bjo] [Gun] [Gun]
[Gun] [Eri] [Eri] [odd]
|
[Paa]
+@end group
@end example
If you're using horizontal trees, it might be nice to display the trees
side-by-side with the summary buffer. You could add something like the
-following to your @file{.gnus.el} file:
+following to your @file{~/.gnus.el} file:
@lisp
(setq gnus-use-trees t
(article 1.0))))
@end lisp
-@xref{Windows Configuration}.
+@xref{Window Layout}.
@node Mail Group Commands
@item B e
@kindex B e (Summary)
@findex gnus-summary-expire-articles
-Expire all expirable articles in the group
-(@code{gnus-summary-expire-articles}).
+Run all expirable articles in the current group through the expiry
+process (@code{gnus-summary-expire-articles}). That is, delete all
+expirable articles in the group that have been around for a while.
+(@pxref{Expiring Mail}).
-@item B M-C-e
-@kindex B M-C-e (Summary)
+@item B C-M-e
+@kindex B C-M-e (Summary)
@findex gnus-summary-expire-articles-now
Delete all the expirable articles in the group
(@code{gnus-summary-expire-articles-now}). This means that @strong{all}
@kindex B m (Summary)
@cindex move mail
@findex gnus-summary-move-article
+@vindex gnus-preserve-marks
Move the article from one mail group to another
-(@code{gnus-summary-move-article}).
+(@code{gnus-summary-move-article}). Marks will be preserved if
+@code{gnus-preserve-marks} is non-@code{nil} (which is the default).
@item B c
@kindex B c (Summary)
@findex gnus-summary-copy-article
@c @icon{gnus-summary-mail-copy}
Copy the article from one group (mail group or not) to a mail group
-(@code{gnus-summary-copy-article}).
+(@code{gnus-summary-copy-article}). Marks will be preserved if
+@code{gnus-preserve-marks} is non-@code{nil} (which is the default).
@item B B
@kindex B B (Summary)
(@code{gnus-summary-import-article}). You will be prompted for a file
name, a @code{From} header and a @code{Subject} header.
+@item B I
+@kindex B I (Summary)
+@findex gnus-summary-create-article
+Create an empty article in the current mail newsgroups
+(@code{gnus-summary-create-article}). You will be prompted for a
+@code{From} header and a @code{Subject} header.
+
@item B r
@kindex B r (Summary)
@findex gnus-summary-respool-article
+@vindex gnus-summary-respool-default-method
Respool the mail article (@code{gnus-summary-respool-article}).
@code{gnus-summary-respool-default-method} will be used as the default
select method when respooling. This variable is @code{nil} by default,
which means that the current group select method will be used instead.
+Marks will be preserved if @code{gnus-preserve-marks} is non-@code{nil}
+(which is the default).
@item B w
@itemx e
@kindex e (Summary)
@findex gnus-summary-edit-article
@kindex C-c C-c (Article)
+@findex gnus-summary-edit-article-done
Edit the current article (@code{gnus-summary-edit-article}). To finish
editing and make the changes permanent, type @kbd{C-c C-c}
-(@kbd{gnus-summary-edit-article-done}). If you give a prefix to the
-@kbd{C-c C-c} command, Gnus won't re-highlight the article.
+(@code{gnus-summary-edit-article-done}). If you give a prefix to the
+@kbd{C-c C-c} command, gnus won't re-highlight the article.
@item B q
@kindex B q (Summary)
@kindex B t (Summary)
@findex gnus-summary-respool-trace
Similarly, this command will display all fancy splitting patterns used
-when repooling, if any (@code{gnus-summary-respool-trace}).
+when respooling, if any (@code{gnus-summary-respool-trace}).
@item B p
@kindex B p (Summary)
@findex gnus-summary-article-posted-p
-Some people have a tendency to send you "courtesy" copies when they
+Some people have a tendency to send you ``courtesy'' copies when they
follow up to articles you have posted. These usually have a
@code{Newsgroups} header in them, but not always. This command
(@code{gnus-summary-article-posted-p}) will try to fetch the current
propagation is much faster than news propagation, and the news copy may
just not have arrived yet.
+@item K E
+@kindex K E (Summary)
+@findex gnus-article-encrypt-body
+@vindex gnus-article-encrypt-protocol
+Encrypt the body of an article (@code{gnus-article-encrypt-body}).
+The body is encrypted with the encryption protocol specified by the
+variable @code{gnus-article-encrypt-protocol}.
+
@end table
@vindex gnus-move-split-methods
@cindex moving articles
-If you move (or copy) articles regularly, you might wish to have Gnus
+If you move (or copy) articles regularly, you might wish to have gnus
suggest where to put the articles. @code{gnus-move-split-methods} is a
variable that uses the same syntax as @code{gnus-split-methods}
(@pxref{Saving Articles}). You may customize that variable to create
-suggestions you find reasonable.
+suggestions you find reasonable. (Note that
+@code{gnus-move-split-methods} uses group names where
+@code{gnus-split-methods} uses file names.)
@lisp
(setq gnus-move-split-methods
@section Various Summary Stuff
@menu
-* Summary Group Information:: Information oriented commands.
-* Searching for Articles:: Multiple article commands.
-* Summary Generation Commands:: (Re)generating the summary buffer.
-* Really Various Summary Commands:: Those pesky non-conformant commands.
+* Summary Group Information:: Information oriented commands.
+* Searching for Articles:: Multiple article commands.
+* Summary Generation Commands::
+* Really Various Summary Commands:: Those pesky non-conformant commands.
@end menu
@table @code
+@vindex gnus-summary-display-while-building
+@item gnus-summary-display-while-building
+If non-@code{nil}, show and update the summary buffer as it's being
+built. If @code{t}, update the buffer after every line is inserted.
+If the value is an integer, @var{n}, update the display every @var{n}
+lines. The default is @code{nil}.
+
+@vindex gnus-summary-display-arrow
+@item gnus-summary-display-arrow
+If non-@code{nil}, display an arrow in the fringe to indicate the
+current article.
+
@vindex gnus-summary-mode-hook
@item gnus-summary-mode-hook
This hook is called when creating a summary mode buffer.
@vindex gnus-summary-ignore-duplicates
@item gnus-summary-ignore-duplicates
-When Gnus discovers two articles that have the same @code{Message-ID},
+When gnus discovers two articles that have the same @code{Message-ID},
it has to do something drastic. No articles are allowed to have the
same @code{Message-ID}, but this may happen when reading mail from some
sources. Gnus allows you to customize what happens with this variable.
-If it is @code{nil} (which is the default), Gnus will rename the
+If it is @code{nil} (which is the default), gnus will rename the
@code{Message-ID} (for display purposes only) and display the article as
any other article. If this variable is @code{t}, it won't display the
article---it'll be as if it never existed.
-@end table
+@vindex gnus-alter-articles-to-read-function
+@item gnus-alter-articles-to-read-function
+This function, which takes two parameters (the group name and the list
+of articles to be selected), is called to allow the user to alter the
+list of articles to be selected.
+For instance, the following function adds the list of cached articles to
+the list in one particular group:
-@node Summary Group Information
-@subsection Summary Group Information
+@lisp
+(defun my-add-cached-articles (group articles)
+ (if (string= group "some.group")
+ (append gnus-newsgroup-cached articles)
+ articles))
+@end lisp
-@table @kbd
+@vindex gnus-newsgroup-variables
+@item gnus-newsgroup-variables
+A list of newsgroup (summary buffer) local variables, or cons of
+variables and their default expressions to be evalled (when the default
+values are not @code{nil}), that should be made global while the summary
+buffer is active.
-@item H f
-@kindex H f (Summary)
+Note: The default expressions will be evaluated (using function
+@code{eval}) before assignment to the local variable rather than just
+assigned to it. If the default expression is the symbol @code{global},
+that symbol will not be evaluated but the global value of the local
+variable will be used instead.
+
+These variables can be used to set variables in the group parameters
+while still allowing them to affect operations done in other
+buffers. For example:
+
+@lisp
+(setq gnus-newsgroup-variables
+ '(message-use-followup-to
+ (gnus-visible-headers .
+ "^From:\\|^Newsgroups:\\|^Subject:\\|^Date:\\|^To:")))
+@end lisp
+
+Also @pxref{Group Parameters}.
+@end table
+
+
+@node Summary Group Information
+@subsection Summary Group Information
+
+@table @kbd
+
+@item H f
+@kindex H f (Summary)
@findex gnus-summary-fetch-faq
@vindex gnus-group-faq-directory
-Try to fetch the FAQ (list of frequently asked questions) for the
-current group (@code{gnus-summary-fetch-faq}). Gnus will try to get the
-FAQ from @code{gnus-group-faq-directory}, which is usually a directory
-on a remote machine. This variable can also be a list of directories.
-In that case, giving a prefix to this command will allow you to choose
-between the various sites. @code{ange-ftp} or @code{efs} will probably
-be used for fetching the file.
+Try to fetch the @acronym{FAQ} (list of frequently asked questions)
+for the current group (@code{gnus-summary-fetch-faq}). Gnus will try
+to get the @acronym{FAQ} from @code{gnus-group-faq-directory}, which
+is usually a directory on a remote machine. This variable can also be
+a list of directories. In that case, giving a prefix to this command
+will allow you to choose between the various sites. @code{ange-ftp}
+or @code{efs} will probably be used for fetching the file.
@item H d
@kindex H d (Summary)
@item H i
@kindex H i (Summary)
@findex gnus-info-find-node
-Go to the Gnus info node (@code{gnus-info-find-node}).
+Go to the gnus info node (@code{gnus-info-find-node}).
@end table
@item M-s
@kindex M-s (Summary)
@findex gnus-summary-search-article-forward
-Search through all subsequent articles for a regexp
+Search through all subsequent (raw) articles for a regexp
(@code{gnus-summary-search-article-forward}).
@item M-r
@kindex M-r (Summary)
@findex gnus-summary-search-article-backward
-Search through all previous articles for a regexp
+Search through all previous (raw) articles for a regexp
(@code{gnus-summary-search-article-backward}).
@item &
@kindex & (Summary)
@findex gnus-summary-execute-command
-This command will prompt you for a header field, a regular expression to
-match on this field, and a command to be executed if the match is made
-(@code{gnus-summary-execute-command}). If given a prefix, search
-backward instead.
+This command will prompt you for a header, a regular expression to match
+on this field, and a command to be executed if the match is made
+(@code{gnus-summary-execute-command}). If the header is an empty
+string, the match is done on the entire article. If given a prefix,
+search backward instead.
+
+For instance, @kbd{& RET some.*string RET #} will put the process mark on
+all articles that have heads or bodies that match @samp{some.*string}.
@item M-&
@kindex M-& (Summary)
Pull all cached articles (for the current group) into the summary buffer
(@code{gnus-summary-insert-cached-articles}).
+@item Y d
+@kindex Y d (Summary)
+@findex gnus-summary-insert-dormant-articles
+Pull all dormant articles (for the current group) into the summary buffer
+(@code{gnus-summary-insert-dormant-articles}).
+
@end table
@table @kbd
-@item C-d
+@item A D
+@itemx C-d
@kindex C-d (Summary)
+@kindex A D (Summary)
@findex gnus-summary-enter-digest-group
If the current article is a collection of other articles (for instance,
a digest), you might use this command to enter a group based on the that
some format, you @kbd{C-d} and read these messages in a more convenient
fashion.
-@item M-C-d
-@kindex M-C-d (Summary)
+@item C-M-d
+@kindex C-M-d (Summary)
@findex gnus-summary-read-document
This command is very similar to the one above, but lets you gather
several documents into one biiig group
Expand the summary buffer window (@code{gnus-summary-expand-window}).
If given a prefix, force an @code{article} window configuration.
-@item M-C-e
-@kindex M-C-e (Summary)
+@item C-M-e
+@kindex C-M-e (Summary)
@findex gnus-summary-edit-parameters
Edit the group parameters (@pxref{Group Parameters}) of the current
group (@code{gnus-summary-edit-parameters}).
-@item M-C-g
-@kindex M-C-g (Summary)
+@item C-M-a
+@kindex C-M-a (Summary)
@findex gnus-summary-customize-parameters
Customize the group parameters (@pxref{Group Parameters}) of the current
group (@code{gnus-summary-customize-parameters}).
@table @kbd
@item Z Z
+@itemx Z Q
@itemx q
@kindex Z Z (Summary)
+@kindex Z Q (Summary)
@kindex q (Summary)
@findex gnus-summary-exit
@vindex gnus-summary-exit-hook
@vindex gnus-summary-prepare-exit-hook
+@vindex gnus-group-no-more-groups-hook
@c @icon{gnus-summary-exit}
Exit the current group and update all information on the group
-(@code{gnus-summary-exit}). @code{gnus-summary-prepare-exit-hook} is
+(@code{gnus-summary-exit}). @code{gnus-summary-prepare-exit-hook} is
called before doing much of the exiting, which calls
@code{gnus-summary-expire-articles} by default.
@code{gnus-summary-exit-hook} is called after finishing the exit
(@code{gnus-summary-catchup-and-goto-next-group}).
@item Z R
+@itemx C-x C-s
@kindex Z R (Summary)
+@kindex C-x C-s (Summary)
@findex gnus-summary-reselect-current-group
Exit this group, and then enter it again
(@code{gnus-summary-reselect-current-group}). If given a prefix, select
@end table
@vindex gnus-exit-group-hook
-@code{gnus-exit-group-hook} is called when you exit the current
-group.
+@code{gnus-exit-group-hook} is called when you exit the current group
+with an ``updating'' exit. For instance @kbd{Q}
+(@code{gnus-summary-exit-no-update}) does not call this hook.
@findex gnus-summary-wake-up-the-dead
@findex gnus-dead-summary-mode
@vindex gnus-kill-summary-on-exit
If you're in the habit of exiting groups, and then changing your mind
about it, you might set @code{gnus-kill-summary-on-exit} to @code{nil}.
-If you do that, Gnus won't kill the summary buffer when you exit it.
+If you do that, gnus won't kill the summary buffer when you exit it.
(Quelle surprise!) Instead it will change the name of the buffer to
something like @samp{*Dead Summary ... *} and install a minor mode
called @code{gnus-dead-summary-mode}. Now, if you switch back to this
@cindex cross-posting
@cindex Xref
-@cindex @sc{nov}
+@cindex @acronym{NOV}
One thing that may cause Gnus to not do the cross-posting thing
-correctly is if you use an @sc{nntp} server that supports @sc{xover}
+correctly is if you use an @acronym{NNTP} server that supports @sc{xover}
(which is very nice, because it speeds things up considerably) which
-does not include the @code{Xref} header in its @sc{nov} lines. This is
+does not include the @code{Xref} header in its @acronym{NOV} lines. This is
Evil, but all too common, alas, alack. Gnus tries to Do The Right Thing
even with @sc{xover} by registering the @code{Xref} lines of all
articles you actually read, but if you kill the articles, or just mark
@cindex LIST overview.fmt
@cindex overview.fmt
-To check whether your @sc{nntp} server includes the @code{Xref} header
+To check whether your @acronym{NNTP} server includes the @code{Xref} header
in its overview files, try @samp{telnet your.nntp.server nntp},
@samp{MODE READER} on @code{inn} servers, and then say @samp{LIST
overview.fmt}. This may not work, but if it does, and the last line you
@node Duplicate Suppression
@section Duplicate Suppression
-By default, Gnus tries to make sure that you don't have to read the same
+By default, gnus tries to make sure that you don't have to read the same
article more than once by utilizing the crossposting mechanism
(@pxref{Crosspost Handling}). However, that simple and efficient
approach may not work satisfactory for some users for various
@enumerate
@item
-The @sc{nntp} server may fail to generate the @code{Xref} header. This
+The @acronym{NNTP} server may fail to generate the @code{Xref} header. This
is evil and not very common.
@item
-The @sc{nntp} server may fail to include the @code{Xref} header in the
+The @acronym{NNTP} server may fail to include the @code{Xref} header in the
@file{.overview} data bases. This is evil and all too common, alas.
@item
You may be reading the same group (or several related groups) from
-different @sc{nntp} servers.
+different @acronym{NNTP} servers.
@item
You may be getting mail that duplicates articles posted to groups.
@vindex gnus-save-duplicate-list
If non-@code{nil}, save the list of duplicates to a file. This will
make startup and shutdown take longer, so the default is @code{nil}.
-However, this means that only duplicate articles read in a single Gnus
+However, this means that only duplicate articles read in a single gnus
session are suppressed.
@item gnus-duplicate-list-length
default is @file{~/News/suppression}.
@end table
-If you have a tendency to stop and start Gnus often, setting
+If you have a tendency to stop and start gnus often, setting
@code{gnus-save-duplicate-list} to @code{t} is probably a good idea. If
-you leave Gnus running for weeks on end, you may have it @code{nil}. On
+you leave gnus running for weeks on end, you may have it @code{nil}. On
the other hand, saving the list makes startup and shutdown much slower,
-so that means that if you stop and start Gnus often, you should set
+so that means that if you stop and start gnus often, you should set
@code{gnus-save-duplicate-list} to @code{nil}. Uhm. I'll leave this up
to you to figure out, I think.
+@node Security
+@section Security
+
+Gnus is able to verify signed messages or decrypt encrypted messages.
+The formats that are supported are @acronym{PGP}, @acronym{PGP/MIME}
+and @acronym{S/MIME}, however you need some external programs to get
+things to work:
+
+@enumerate
+@item
+To handle @acronym{PGP} and @acronym{PGP/MIME} messages, you have to
+install an OpenPGP implementation such as GnuPG. The Lisp interface
+to GnuPG included with Gnus is called PGG (@pxref{Top, ,PGG, pgg, PGG
+Manual}), but Mailcrypt and gpg.el are also supported.
+
+@item
+To handle @acronym{S/MIME} message, you need to install OpenSSL. OpenSSL 0.9.6
+or newer is recommended.
+
+@end enumerate
+
+More information on how to set things up can be found in the message
+manual (@pxref{Security, ,Security, message, Message Manual}).
+
+@table @code
+@item mm-verify-option
+@vindex mm-verify-option
+Option of verifying signed parts. @code{never}, not verify;
+@code{always}, always verify; @code{known}, only verify known
+protocols. Otherwise, ask user.
+
+@item mm-decrypt-option
+@vindex mm-decrypt-option
+Option of decrypting encrypted parts. @code{never}, no decryption;
+@code{always}, always decrypt; @code{known}, only decrypt known
+protocols. Otherwise, ask user.
+
+@item mml1991-use
+@vindex mml1991-use
+Symbol indicating elisp interface to OpenPGP implementation for
+@acronym{PGP} messages. The default is @code{pgg}, but
+@code{mailcrypt} and @code{gpg} are also supported although
+deprecated.
+
+@item mml2015-use
+@vindex mml2015-use
+Symbol indicating elisp interface to OpenPGP implementation for
+@acronym{PGP/MIME} messages. The default is @code{pgg}, but
+@code{mailcrypt} and @code{gpg} are also supported although
+deprecated.
+
+@end table
+
+@cindex snarfing keys
+@cindex importing PGP keys
+@cindex PGP key ring import
+Snarfing OpenPGP keys (i.e., importing keys from articles into your
+key ring) is not supported explicitly through a menu item or command,
+rather Gnus do detect and label keys as @samp{application/pgp-keys},
+allowing you to specify whatever action you think is appropriate
+through the usual @acronym{MIME} infrastructure. You can use a
+@file{~/.mailcap} entry (@pxref{mailcap, , mailcap, emacs-mime, The
+Emacs MIME Manual}) such as the following to import keys using GNU
+Privacy Guard when you click on the @acronym{MIME} button
+(@pxref{Using MIME}).
+
+@example
+application/pgp-keys; gpg --import --interactive --verbose; needsterminal
+@end example
+@noindent
+This happens to also be the default action defined in
+@code{mailcap-mime-data}.
+
+@node Mailing List
+@section Mailing List
+@cindex mailing list
+@cindex RFC 2396
+
+@kindex A M (summary)
+@findex gnus-mailing-list-insinuate
+Gnus understands some mailing list fields of RFC 2369. To enable it,
+add a @code{to-list} group parameter (@pxref{Group Parameters}),
+possibly using @kbd{A M} (@code{gnus-mailing-list-insinuate}) in the
+summary buffer.
+
+That enables the following commands to the summary buffer:
+
+@table @kbd
+
+@item C-c C-n h
+@kindex C-c C-n h (Summary)
+@findex gnus-mailing-list-help
+Send a message to fetch mailing list help, if List-Help field exists.
+
+@item C-c C-n s
+@kindex C-c C-n s (Summary)
+@findex gnus-mailing-list-subscribe
+Send a message to subscribe the mailing list, if List-Subscribe field exists.
+
+@item C-c C-n u
+@kindex C-c C-n u (Summary)
+@findex gnus-mailing-list-unsubscribe
+Send a message to unsubscribe the mailing list, if List-Unsubscribe
+field exists.
+
+@item C-c C-n p
+@kindex C-c C-n p (Summary)
+@findex gnus-mailing-list-post
+Post to the mailing list, if List-Post field exists.
+
+@item C-c C-n o
+@kindex C-c C-n o (Summary)
+@findex gnus-mailing-list-owner
+Send a message to the mailing list owner, if List-Owner field exists.
+
+@item C-c C-n a
+@kindex C-c C-n a (Summary)
+@findex gnus-mailing-list-archive
+Browse the mailing list archive, if List-Archive field exists.
+
+@end table
+
-@node The Article Buffer
-@chapter The Article Buffer
+@node Article Buffer
+@chapter Article Buffer
@cindex article buffer
The articles are displayed in the article buffer, of which there is only
one. All the summary buffers share the same article buffer unless you
-tell Gnus otherwise.
+tell gnus otherwise.
@menu
-* Hiding Headers:: Deciding what headers should be displayed.
-* Using MIME:: Pushing articles through @sc{mime} before reading them.
-* Customizing Articles:: Tailoring the look of the articles.
-* Article Keymap:: Keystrokes available in the article buffer.
-* Misc Article:: Other stuff.
+* Hiding Headers:: Deciding what headers should be displayed.
+* Using MIME:: Pushing articles through @acronym{MIME} before reading them.
+* Customizing Articles:: Tailoring the look of the articles.
+* Article Keymap:: Keystrokes available in the article buffer.
+* Misc Article:: Other stuff.
@end menu
article. That's well and nice, but there's also lots of information
most people do not want to see---what systems the article has passed
through before reaching you, the @code{Message-ID}, the
-@code{References}, etc. ad nauseum---and you'll probably want to get rid
+@code{References}, etc. ad nauseam---and you'll probably want to get rid
of some of those lines. If you want to keep all those lines in the
article buffer, you can set @code{gnus-show-all-headers} to @code{t}.
should be a regular expression that matches all lines that you want to
hide. All lines that do not match this variable will remain visible.
-For instance, if you just want to get rid of the @code{References} line
-and the @code{Xref} line, you might say:
+For instance, if you just want to get rid of the @code{References} field
+and the @code{Xref} field, you might say:
@lisp
(setq gnus-ignored-headers "^References:\\|^Xref:")
@findex gnus-article-hide-boring-headers
@vindex gnus-boring-article-headers
You can hide further boring headers by setting
-@code{gnus-treat-hide-boring-header} to @code{head}. What this function
+@code{gnus-treat-hide-boring-headers} to @code{head}. What this function
does depends on the @code{gnus-boring-article-headers} variable. It's a
-list, but this list doesn't actually contain header names. Instead is
+list, but this list doesn't actually contain header names. Instead it
lists various @dfn{boring conditions} that Gnus can check and remove
from sight.
Remove the @code{Followup-To} header if it is identical to the
@code{Newsgroups} header.
@item reply-to
-Remove the @code{Reply-To} header if it lists the same address as the
-@code{From} header.
+Remove the @code{Reply-To} header if it lists the same addresses as
+the @code{From} header, or if the @code{broken-reply-to} group
+parameter is set.
@item newsgroups
Remove the @code{Newsgroups} header if it only contains the current group
name.
+@item to-address
+Remove the @code{To} header if it only contains the address identical to
+the current group's @code{to-address} parameter.
+@item to-list
+Remove the @code{To} header if it only contains the address identical to
+the current group's @code{to-list} parameter.
+@item cc-list
+Remove the @code{CC} header if it only contains the address identical to
+the current group's @code{to-list} parameter.
@item date
Remove the @code{Date} header if the article is less than three days
old.
Remove all @code{To} headers if there are more than one.
@end table
-To include the four three elements, you could say something like;
+To include these three elements, you could say something like:
@lisp
(setq gnus-boring-article-headers
@node Using MIME
-@section Using @sc{mime}
-@cindex @sc{mime}
+@section Using MIME
+@cindex @acronym{MIME}
Mime is a standard for waving your hands through the air, aimlessly,
while people stand around yawning.
-@sc{mime}, however, is a standard for encoding your articles, aimlessly,
+@acronym{MIME}, however, is a standard for encoding your articles, aimlessly,
while all newsreaders die of fear.
-@sc{mime} may specify what character set the article uses, the encoding
+@acronym{MIME} may specify what character set the article uses, the encoding
of the characters, and it also makes it possible to embed pictures and
other naughty stuff in innocent-looking articles.
-@vindex gnus-display-mime-function
-@findex gnus-display-mime
-Gnus pushes @sc{mime} articles through @code{gnus-display-mime-function}
-to display the @sc{mime} parts. This is @code{gnus-display-mime} by
-default, which creates a bundle of clickable buttons that can be used to
-display, save and manipulate the @sc{mime} objects.
+@vindex gnus-show-mime
+@vindex gnus-article-display-method-for-mime
+@findex gnus-article-display-mime-message
+gnus handles @acronym{MIME} by pushing the articles through
+@code{gnus-article-display-method-for-mime}, which is
+@code{gnus-article-display-mime-message} by default. This function
+calls the @acronym{SEMI} MIME-View program to actually do the work. For
+more information on @acronym{SEMI} MIME-View, see its manual page
+(however it is not existed yet, sorry).
+
+Set @code{gnus-show-mime} to @code{t} if you want to use
+@acronym{MIME} all the time. If you have @code{gnus-show-mime} set,
+then you'll see some unfortunate display glitches in the article buffer.
+These can't be avoided.
+
+In GNUS or Gnus, it might be best to just use the toggling functions
+from the summary buffer to avoid getting nasty surprises. (For instance,
+you enter the group @samp{alt.sing-a-long} and, before you know it,
+@acronym{MIME} has decoded the sound file in the article and some
+horrible sing-a-long song comes screaming out your speakers, and you
+can't find the volume button, because there isn't one, and people are
+starting to look at you, and you try to stop the program, but you can't,
+and you can't find the program to control the volume, and everybody else
+in the room suddenly decides to look at you disdainfully, and you'll
+feel rather stupid.)
-The following commands are available when you have placed point over a
-@sc{mime} button:
+Any similarity to real events and people is purely coincidental. Ahem.
-@table @kbd
-@findex gnus-article-press-button
-@item RET (Article)
-@itemx BUTTON-2 (Article)
-Toggle displaying of the @sc{mime} object
-(@code{gnus-article-press-button}).
-
-@findex gnus-mime-view-part
-@item M-RET (Article)
-@itemx v (Article)
-Prompt for a method, and then view the @sc{mime} object using this
-method (@code{gnus-mime-view-part}).
-
-@findex gnus-mime-save-part
-@item o (Article)
-Prompt for a file name, and then save the @sc{mime} object
-(@code{gnus-mime-save-part}).
-
-@findex gnus-mime-copy-part
-@item c (Article)
-Copy the @sc{mime} object to a fresh buffer and display this buffer
-(@code{gnus-mime-copy-part}).
-
-@findex gnus-mime-pipe-part
-@item | (Article)
-Output the @sc{mime} object to a process (@code{gnus-mime-pipe-part}).
-@end table
-
-Gnus will display some @sc{mime} objects automatically. The way Gnus
-determines which parts to do this with is described in the Emacs MIME
-manual.
-
-It might be best to just use the toggling functions from the article
-buffer to avoid getting nasty surprises. (For instance, you enter the
-group @samp{alt.sing-a-long} and, before you know it, @sc{mime} has
-decoded the sound file in the article and some horrible sing-a-long song
-comes screaming out your speakers, and you can't find the volume button,
-because there isn't one, and people are starting to look at you, and you
-try to stop the program, but you can't, and you can't find the program
-to control the volume, and everybody else in the room suddenly decides
-to look at you disdainfully, and you'll feel rather stupid.)
+To avoid such kind of situation, gnus stops to use
+@code{metamail-buffer}. So now, you can set @code{gnus-show-mime} to
+non-@code{nil} every-time, then you can push button in the article
+buffer when there are nobody else.
-Any similarity to real events and people is purely coincidental. Ahem.
+Also @pxref{MIME Commands}.
@node Customizing Articles
@cindex article customization
A slew of functions for customizing how the articles are to look like
-exist. You can call these functions interactively, or you can have them
+exist. You can call these functions interactively
+(@pxref{Article Washing}), or you can have them
called automatically when you select the articles.
To have them called automatically, you should set the corresponding
@code{gnus-treat-hide-headers}. Below is a list of variables that can
be set, but first we discuss the values these variables can have.
+Note: Some values, while valid, make little sense. Check the list below
+for sensible values.
+
@enumerate
@item
@code{nil}: Don't do this treatment.
than this number.
@item
-A sexp: Do this treatment on all body parts where the sexp evals to a
-non-@code{nil} value.
+A list of strings: Do this treatment on all body parts that are in
+articles that are read in groups that have names that match one of the
+regexps in the list.
+
+@item
+A list where the first element is not a string:
+
+The list is evaluated recursively. The first element of the list is a
+predicate. The following predicates are recognized: @code{or},
+@code{and}, @code{not} and @code{typep}. Here's an example:
+
+@lisp
+(or last
+ (typep "text/x-vcard"))
+@end lisp
+
+@item
+@code{mime}: Do this treatment if the value of @code{gnus-show-mime}' is
+non-nil.
@end enumerate
You may have noticed that the word @dfn{part} is used here. This refers
-to the fact that some messages are @sc{mime} multipart articles that may
+to the fact that some messages are @acronym{MIME} multipart articles that may
be divided into several parts. Articles that are not multiparts are
considered to contain just a single part.
want to, but by default, only @samp{text/plain} parts are given the
treatment. This is controlled by the @code{gnus-article-treat-types}
variable, which is a list of regular expressions that are matched to the
-type of the part.
+type of the part. This variable is ignored if the value of the
+controlling variable is a predicate list, as described above.
The following treatment options are available. The easiest way to
customize this is to examine the @code{gnus-article-treat} customization
-group.
+group. Values in parenthesis are suggested sensible values. Others are
+possible but those listed are probably sufficient for most people.
@table @code
-@item gnus-treat-highlight-signature
-@item gnus-treat-buttonize
-@item gnus-treat-buttonize-head
-@item gnus-treat-emphasize
-@item gnus-treat-fill-article
-@item gnus-treat-strip-cr
-@item gnus-treat-hide-headers
-@item gnus-treat-hide-boring-headers
-@item gnus-treat-hide-signature
-@item gnus-treat-hide-citation
-@item gnus-treat-strip-pgp
-@item gnus-treat-strip-pem
-@item gnus-treat-highlight-headers
-@item gnus-treat-highlight-citation
-@item gnus-treat-highlight-signature
-@item gnus-treat-date-ut
-@item gnus-treat-date-local
-@item gnus-treat-date-lapsed
-@item gnus-treat-date-original
-@item gnus-treat-strip-trailing-blank-lines
-@item gnus-treat-strip-leading-blank-lines
-@item gnus-treat-strip-multiple-blank-lines
-@item gnus-treat-strip-blank-lines
-@item gnus-treat-overstrike
-@item gnus-treat-display-xface
-@item gnus-treat-display-smileys
-@item gnus-treat-display-picons
+@item gnus-treat-buttonize (t, integer)
+@item gnus-treat-buttonize-head (head)
+
+@xref{Article Buttons}.
+
+@item gnus-treat-capitalize-sentences (t, integer)
+@item gnus-treat-overstrike (t, integer)
+@item gnus-treat-strip-cr (t, integer)
+@item gnus-treat-strip-headers-in-body (t, integer)
+@item gnus-treat-strip-leading-blank-lines (t, integer)
+@item gnus-treat-strip-multiple-blank-lines (t, integer)
+@item gnus-treat-strip-pem (t, last, integer)
+@item gnus-treat-strip-trailing-blank-lines (t, last, integer)
+@item gnus-treat-unsplit-urls (t, integer)
+@item gnus-treat-wash-html (t, integer)
+@item gnus-treat-decode-article-as-default-mime-charset (t, integer)
+
+@xref{Article Washing}.
+
+@item gnus-treat-date-english (head)
+@item gnus-treat-date-iso8601 (head)
+@item gnus-treat-date-lapsed (head)
+@item gnus-treat-date-local (head)
+@item gnus-treat-date-original (head)
+@item gnus-treat-date-user-defined (head)
+@item gnus-treat-date-ut (head)
+
+@xref{Article Date}.
+
+@item gnus-treat-from-picon (head)
+@item gnus-treat-mail-picon (head)
+@item gnus-treat-newsgroups-picon (head)
+
+@xref{Picons}.
+
+@item gnus-treat-display-smileys (t, integer)
+
+@item gnus-treat-body-boundary (head)
+
+@vindex gnus-body-boundary-delimiter
+Adds a delimiter between header and body, the string used as delimiter
+is controlled by @code{gnus-body-boundary-delimiter}.
+
+@xref{Smileys}.
+
+@item gnus-treat-display-x-face (head)
+
+@xref{X-Face}.
+
+@item gnus-treat-display-face (head)
+
+@xref{Face}.
+
+@item gnus-treat-emphasize (t, head, integer)
+@item gnus-treat-fill-article (t, integer)
+@item gnus-treat-fill-long-lines (t, integer)
+@item gnus-treat-hide-boring-headers (head)
+@item gnus-treat-hide-citation (t, integer)
+@item gnus-treat-hide-citation-maybe (t, integer)
+@item gnus-treat-hide-headers (head)
+@item gnus-treat-hide-signature (t, last)
+@item gnus-treat-strip-banner (t, last)
+@item gnus-treat-strip-list-identifiers (head)
+
+@xref{Article Hiding}.
+
+@item gnus-treat-highlight-citation (t, integer)
+@item gnus-treat-highlight-headers (head)
+@item gnus-treat-highlight-signature (t, last, integer)
+
+@xref{Article Highlighting}.
+
+@item gnus-treat-play-sounds
+@item gnus-treat-translate
+@item gnus-treat-ansi-sequences (t)
+@item gnus-treat-x-pgp-sig (head)
+
+@item gnus-treat-unfold-headers (head)
+@item gnus-treat-fold-headers (head)
+@item gnus-treat-fold-newsgroups (head)
+@item gnus-treat-leading-whitespace (head)
+
+@xref{Article Header}.
+
+
@end table
@vindex gnus-part-display-hook
@code{gnus-part-display-hook}. The functions are called narrowed to the
part, and you can do anything you like, pretty much. There is no
information that you have to keep in the buffer---you can change
-everything. However, you shouldn't delete any headers. Instead make
-them invisible if you want to make them go away.
+everything.
@node Article Keymap
@kindex SPACE (Article)
@findex gnus-article-next-page
Scroll forwards one page (@code{gnus-article-next-page}).
+This is exactly the same as @kbd{h SPACE h}.
@item DEL
@kindex DEL (Article)
@findex gnus-article-prev-page
Scroll backwards one page (@code{gnus-article-prev-page}).
+This is exactly the same as @kbd{h DEL h}.
@item C-c ^
@kindex C-c ^ (Article)
@findex gnus-article-prev-button
Go to the previous button, if any (@code{gnus-article-prev-button}).
+@item R
+@kindex R (Article)
+@findex gnus-article-reply-with-original
+Send a reply to the current article and yank the current article
+(@code{gnus-article-reply-with-original}). If given a prefix, make a
+wide reply. If the region is active, only yank the text in the
+region.
+
+@item F
+@kindex F (Article)
+@findex gnus-article-followup-with-original
+Send a followup to the current article and yank the current article
+(@code{gnus-article-followup-with-original}). If given a prefix, make
+a wide reply. If the region is active, only yank the text in the
+region.
+
+
@end table
@vindex gnus-article-decode-hook
@item gnus-article-decode-hook
-@cindex MIME
-Hook used to decode @sc{mime} articles. The default value is
+@cindex @acronym{MIME}
+Hook used to decode @acronym{MIME} articles. The default value is
@code{(article-decode-charset article-decode-encoded-words)}
@vindex gnus-article-prepare-hook
Syntax table used in article buffers. It is initialized from
@code{text-mode-syntax-table}.
+@vindex gnus-article-over-scroll
+@item gnus-article-over-scroll
+If non-@code{nil}, allow scrolling the article buffer even when there
+no more new text to scroll in. The default is @code{nil}.
+
@vindex gnus-article-mode-line-format
@item gnus-article-mode-line-format
This variable is a format string along the same lines as
-@code{gnus-summary-mode-line-format} (@pxref{Mode Line Formatting}). It
-accepts the same format specifications as that variable, with one
-extension:
+@code{gnus-summary-mode-line-format} (@pxref{Summary Buffer Mode
+Line}). It accepts the same format specifications as that variable,
+with two extensions:
@table @samp
+
@item w
The @dfn{wash status} of the article. This is a short string with one
character for each possible article wash operation that may have been
-performed.
+performed. The characters and their meaning:
+
+@table @samp
+
+@item c
+Displayed when cited text may be hidden in the article buffer.
+
+@item h
+Displayed when headers are hidden in the article buffer.
+
+@item p
+Displayed when article is digitally signed or encrypted, and Gnus has
+hidden the security headers. (N.B. does not tell anything about
+security status, i.e. good or bad signature.)
+
+@item s
+Displayed when the signature has been hidden in the Article buffer.
+
+@item o
+Displayed when Gnus has treated overstrike characters in the article buffer.
+
+@item e
+Displayed when Gnus has treated emphasised strings in the article buffer.
+
+@end table
+
@item m
-The number of @sc{mime} parts in the article.
+The number of @acronym{MIME} parts in the article.
+
@end table
@vindex gnus-break-pages
@vindex gnus-page-delimiter
This is the delimiter mentioned above. By default, it is @samp{^L}
(formfeed).
+
+@cindex IDNA
+@cindex internationalized domain names
+@vindex gnus-use-idna
+@item gnus-use-idna
+This variable controls whether Gnus performs IDNA decoding of
+internationalized domain names inside @samp{From}, @samp{To} and
+@samp{Cc} headers. This requires
+@uref{http://www.gnu.org/software/libidn/, GNU Libidn}, and this
+variable is only enabled if you have installed it.
+
@end table
@cindex reply
@cindex followup
@cindex post
+@cindex using gpg
+@cindex using s/mime
+@cindex using smime
@kindex C-c C-c (Post)
All commands for posting and mailing will put you in a message buffer
-where you can edit the article all you like, before you send the article
-by pressing @kbd{C-c C-c}. @xref{Top, , Top, message, The Message
-Manual}. If you are in a foreign news group, and you wish to post the
-article using the foreign server, you can give a prefix to @kbd{C-c C-c}
-to make Gnus try to post using the foreign server.
+where you can edit the article all you like, before you send the
+article by pressing @kbd{C-c C-c}. @xref{Top, , Overview, message,
+Message Manual}. Where the message will be posted/mailed to depends
+on your setup (@pxref{Posting Server}).
@menu
-* Mail:: Mailing and replying.
-* Post:: Posting and following up.
-* Posting Server:: What server should you post via?
-* Mail and Post:: Mailing and posting at the same time.
-* Archived Messages:: Where Gnus stores the messages you've sent.
-* Posting Styles:: An easier way to specify who you are.
-* Drafts:: Postponing messages and rejected messages.
-* Rejected Articles:: What happens if the server doesn't like your article?
+* Mail:: Mailing and replying.
+* Posting Server:: What server should you post and mail via?
+* POP before SMTP:: You cannot send a mail unless you read a mail.
+* Mail and Post:: Mailing and posting at the same time.
+* Archived Messages:: Where Gnus stores the messages you've sent.
+* Posting Styles:: An easier way to specify who you are.
+* Drafts:: Postponing messages and rejected messages.
+* Rejected Articles:: What happens if the server doesn't like your article?
+* Signing and encrypting:: How to compose secure messages.
@end menu
-Also see @pxref{Canceling and Superseding} for information on how to
+Also @pxref{Canceling and Superseding} for information on how to
remove articles you shouldn't have posted.
@item gnus-uu-digest-headers
@vindex gnus-uu-digest-headers
List of regexps to match headers included in digested messages. The
-headers will be included in the sequence they are matched.
+headers will be included in the sequence they are matched. If
+@code{nil} include all headers.
@item gnus-add-to-list
@vindex gnus-add-to-list
If non-@code{nil}, add a @code{to-list} group parameter to mail groups
that have none when you do a @kbd{a}.
-@end table
-
-
-@node Post
-@section Post
-
-Variables for composing news articles:
+@item gnus-confirm-mail-reply-to-news
+@vindex gnus-confirm-mail-reply-to-news
+This can also be a function receiving the group name as the only
+parameter which should return non-@code{nil} if a confirmation is
+needed, or a regular expression matching group names, where
+confirmation is should be asked for.
-@table @code
-@item gnus-sent-message-ids-file
-@vindex gnus-sent-message-ids-file
-Gnus will keep a @code{Message-ID} history file of all the mails it has
-sent. If it discovers that it has already sent a mail, it will ask the
-user whether to re-send the mail. (This is primarily useful when
-dealing with @sc{soup} packets and the like where one is apt to send the
-same packet multiple times.) This variable says what the name of this
-history file is. It is @file{~/News/Sent-Message-IDs} by default. Set
-this variable to @code{nil} if you don't want Gnus to keep a history
-file.
+If you find yourself never wanting to reply to mail, but occasionally
+press R anyway, this variable might be for you.
-@item gnus-sent-message-ids-length
-@vindex gnus-sent-message-ids-length
-This variable says how many @code{Message-ID}s to keep in the history
-file. It is 1000 by default.
+@item gnus-confirm-treat-mail-like-news
+@vindex gnus-confirm-treat-mail-like-news
+If non-@code{nil}, Gnus also requests confirmation according to
+@code{gnus-confirm-mail-reply-to-news} when replying to mail. This is
+useful for treating mailing lists like newsgroups.
@end table
Thank you for asking. I hate you.
-@vindex gnus-post-method
+It can be quite complicated.
-It can be quite complicated. Normally, Gnus will use the same native
-server. However. If your native server doesn't allow posting, just
-reading, you probably want to use some other server to post your
-(extremely intelligent and fabulously interesting) articles. You can
-then set the @code{gnus-post-method} to some other method:
+@vindex gnus-post-method
+When posting news, Message usually invokes @code{message-send-news}
+(@pxref{News Variables, , News Variables, message, Message Manual}).
+Normally, Gnus will post using the same select method as you're
+reading from (which might be convenient if you're reading lots of
+groups from different private servers). However. If the server
+you're reading from doesn't allow posting, just reading, you probably
+want to use some other server to post your (extremely intelligent and
+fabulously interesting) articles. You can then set the
+@code{gnus-post-method} to some other method:
@lisp
(setq gnus-post-method '(nnspool ""))
Now, if you've done this, and then this server rejects your article, or
this server is down, what do you do then? To override this variable you
can use a non-zero prefix to the @kbd{C-c C-c} command to force using
-the ``current'' server for posting.
+the ``current'' server, to get back the default behavior, for posting.
If you give a zero prefix (i.e., @kbd{C-u 0 C-c C-c}) to that command,
-Gnus will prompt you for what method to use for posting.
+gnus will prompt you for what method to use for posting.
You can also set @code{gnus-post-method} to a list of select methods.
-If that's the case, Gnus will always prompt you for what method to use
+If that's the case, gnus will always prompt you for what method to use
for posting.
-Finally, if you want to always post using the same select method as
-you're reading from (which might be convenient if you're reading lots of
-groups from different private servers), you can set this variable to
-@code{current}.
+Finally, if you want to always post using the native select method,
+you can set this variable to @code{native}.
+
+When sending mail, Message invokes @code{message-send-mail-function}.
+The default function, @code{message-send-mail-with-sendmail}, pipes
+your article to the @code{sendmail} binary for further queuing and
+sending. When your local system is not configured for sending mail
+using @code{sendmail}, and you have access to a remote @acronym{SMTP}
+server, you can set @code{message-send-mail-function} to
+@code{smtpmail-send-it} and make sure to setup the @code{smtpmail}
+package correctly. An example:
+
+@lisp
+(setq message-send-mail-function 'smtpmail-send-it
+ smtpmail-default-smtp-server "YOUR SMTP HOST")
+;; The following variable needs to be set because of the FLIM version of
+;; smtpmail.el. Which smtpmail.el is used depends on the `load-path'.
+(setq smtp-default-smtp-server "YOUR SMTP HOST")
+@end lisp
+
+To the thing similar to this, there is
+@code{message-smtpmail-send-it}. It is useful if your @acronym{ISP}
+requires the @acronym{POP}-before-@acronym{SMTP} authentication.
+@xref{POP before SMTP}.
+
+Other possible choices for @code{message-send-mail-function} includes
+@code{message-send-mail-with-mh}, @code{message-send-mail-with-qmail},
+and @code{feedmail-send-it}.
+
+@node POP before SMTP
+@section POP before SMTP
+@cindex pop before smtp
+@findex message-smtpmail-send-it
+@findex mail-source-touch-pop
+
+Does your @acronym{ISP} require the @acronym{POP}-before-@acronym{SMTP}
+authentication? It is whether you need to connect to the @acronym{POP}
+mail server within a certain time before sending mails. If so, there is
+a convenient way. To do that, put the following lines in your
+@file{~/.gnus.el} file:
+@lisp
+(setq message-send-mail-function 'message-smtpmail-send-it)
+(add-hook 'message-send-mail-hook 'mail-source-touch-pop)
+@end lisp
+
+@noindent
+It means to let Gnus connect to the @acronym{POP} mail server in advance
+whenever you send a mail. The @code{mail-source-touch-pop} function
+does only a @acronym{POP} authentication according to the value of
+@code{mail-sources} without fetching mails, just before sending a mail.
+Note that you have to use @code{message-smtpmail-send-it} which runs
+@code{message-send-mail-hook} rather than @code{smtpmail-send-it} and
+set the value of @code{mail-sources} for a @acronym{POP} connection
+correctly. @xref{Mail Sources}.
+
+If you have two or more @acronym{POP} mail servers set in
+@code{mail-sources}, you may want to specify one of them to
+@code{mail-source-primary-source} as the @acronym{POP} mail server to be
+used for the @acronym{POP}-before-@acronym{SMTP} authentication. If it
+is your primary @acronym{POP} mail server (i.e., you are fetching mails
+mainly from that server), you can set it permanently as follows:
+
+@lisp
+(setq mail-source-primary-source
+ '(pop :server "pop3.mail.server"
+ :password "secret"))
+@end lisp
+
+@noindent
+Otherwise, bind it dynamically only when performing the
+@acronym{POP}-before-@acronym{SMTP} authentication as follows:
+
+@lisp
+(add-hook 'message-send-mail-hook
+ (lambda ()
+ (let ((mail-source-primary-source
+ '(pop :server "pop3.mail.server"
+ :password "secret")))
+ (mail-source-touch-pop))))
+@end lisp
@node Mail and Post
@section Mail and Post
@cindex mailing lists
If your news server offers groups that are really mailing lists
-gatewayed to the @sc{nntp} server, you can read those groups without
+gatewayed to the @acronym{NNTP} server, you can read those groups without
problems, but you can't post/followup to them without some difficulty.
One solution is to add a @code{to-address} to the group parameters
(@pxref{Group Parameters}). An easier thing to do is set the
lists will work most of the time. Posting to these groups (@kbd{a}) is
still a pain, though.
+@item gnus-user-agent
+@vindex gnus-user-agent
+@cindex User-Agent
+
+This variable controls which information should be exposed in the
+User-Agent header. It can be one of the symbols @code{gnus} (show only
+Gnus version), @code{emacs-gnus} (show only Emacs and Gnus versions),
+@code{emacs-gnus-config} (same as @code{emacs-gnus} plus system
+configuration), @code{emacs-gnus-type} (same as @code{emacs-gnus} plus
+system type) or a custom string. If you set it to a string, be sure to
+use a valid format, see RFC 2616.
+
@end table
You may want to do spell-checking on messages that you send out. Or, if
(add-hook 'message-send-hook 'ispell-message)
@end lisp
+If you want to change the @code{ispell} dictionary based on what group
+you're in, you could say something like the following:
+
+@lisp
+(add-hook 'gnus-select-group-hook
+ (lambda ()
+ (cond
+ ((string-match
+ "^de\\." (gnus-group-real-name gnus-newsgroup-name))
+ (ispell-change-dictionary "deutsch"))
+ (t
+ (ispell-change-dictionary "english")))))
+@end lisp
+
+Modify to suit your needs.
+
@node Archived Messages
@section Archived Messages
@code{gnus-message-archive-group} variable should be @code{nil}, which
is the default.
+For archiving interesting messages in a group you read, see the
+@kbd{B c} (@code{gnus-summary-copy-article}) command (@pxref{Mail
+Group Commands}).
+
@vindex gnus-message-archive-method
-@code{gnus-message-archive-method} says what virtual server Gnus is to
+@code{gnus-message-archive-method} says what virtual server gnus is to
use to store sent messages. The default is:
@lisp
@end lisp
You can, however, use any mail select method (@code{nnml},
-@code{nnmbox}, etc.). @code{nnfolder} is a quite likeable select method
+@code{nnmbox}, etc.). @code{nnfolder} is a quite likable select method
for doing this sort of thing, though. If you don't like the default
directory chosen, you could say something like:
This variable can be used to do the following:
-@itemize @bullet
+@table @asis
@item a string
Messages will be saved in that group.
+
+Note that you can include a select method in the group name, then the
+message will not be stored in the select method given by
+@code{gnus-message-archive-method}, but in the select method specified
+by the group name, instead. Suppose @code{gnus-message-archive-method}
+has the default value shown above. Then setting
+@code{gnus-message-archive-group} to @code{"foo"} means that outgoing
+messages are stored in @samp{nnfolder+archive:foo}, but if you use the
+value @code{"nnml:foo"}, then outgoing messages will be stored in
+@samp{nnml:foo}.
+
@item a list of strings
Messages will be saved in all those groups.
+
@item an alist of regexps, functions and forms
When a key ``matches'', the result is used.
+
@item @code{nil}
No message archiving will take place. This is the default.
-@end itemize
+@end table
Let's illustrate:
(setq gnus-message-archive-group
'((if (message-news-p)
"misc-news"
- (concat "mail." (format-time-string
- "%Y-%m" (current-time))))))
+ (concat "mail." (format-time-string "%Y-%m")))))
@end lisp
-(XEmacs 19.13 doesn't have @code{format-time-string}, so you'll have to
-use a different value for @code{gnus-message-archive-group} there.)
+@c (XEmacs 19.13 doesn't have @code{format-time-string}, so you'll have to
+@c use a different value for @code{gnus-message-archive-group} there.)
Now, when you send a message off, it will be stored in the appropriate
group. (If you want to disable storing for just one particular message,
you can just remove the @code{Gcc} header that has been inserted.) The
archive group will appear in the group buffer the next time you start
-Gnus, or the next time you press @kbd{F} in the group buffer. You can
+gnus, or the next time you press @kbd{F} in the group buffer. You can
enter it and read the articles in it just like you'd read any other
group. If the group gets really big and annoying, you can simply rename
if (using @kbd{G r} in the group buffer) to something
This variable can be used instead of @code{gnus-message-archive-group},
but the latter is the preferred method.
+
+@item gnus-gcc-mark-as-read
+@vindex gnus-gcc-mark-as-read
+If non-@code{nil}, automatically mark @code{Gcc} articles as read.
+
+@item gnus-gcc-externalize-attachments
+@vindex gnus-gcc-externalize-attachments
+If @code{nil}, attach files as normal parts in Gcc copies; if a regexp
+and matches the Gcc group name, attach files as external parts; if it is
+@code{all}, attach local files as external parts; if it is other
+non-@code{nil}, the behavior is the same as @code{all}, but it may be
+changed in the future.
+
@end table
The first element in each style is called the @code{match}. If it's a
string, then Gnus will try to regexp match it against the group name.
-If it's a function symbol, that function will be called with no
-arguments. If it's a variable symbol, then the variable will be
+If it is the form @code{(header @var{match} @var{regexp})}, then Gnus
+will look in the original article for a header whose name is
+@var{match} and compare that @var{regexp}. @var{match} and
+@var{regexp} are strings. (The original article is the one you are
+replying or following up to. If you are not composing a reply or a
+followup, then there is nothing to match against.) If the
+@code{match} is a function symbol, that function will be called with
+no arguments. If it's a variable symbol, then the variable will be
referenced. If it's a list, then that list will be @code{eval}ed. In
-any case, if this returns a non-@code{nil} value, then the style is said
-to @dfn{match}.
-
-Each style may contain a arbitrary amount of @dfn{attributes}. Each
-attribute consists of a @var{(name . value)} pair. The attribute name
-can be one of @code{signature}, @code{signature-file},
-@code{organization}, @code{address}, @code{name} or @code{body}. The
-attribute name can also be a string. In that case, this will be used as
-a header name, and the value will be inserted in the headers of the
-article.
+any case, if this returns a non-@code{nil} value, then the style is
+said to @dfn{match}.
+
+Each style may contain an arbitrary amount of @dfn{attributes}. Each
+attribute consists of a @code{(@var{name} @var{value})} pair. The
+attribute name can be one of:
+
+@itemize @bullet
+@item @code{signature}
+@item @code{signature-file}
+@item @code{x-face-file}
+@item @code{address}, overriding @code{user-mail-address}
+@item @code{name}, overriding @code{(user-full-name)}
+@item @code{body}
+@end itemize
+
+The attribute name can also be a string or a symbol. In that case,
+this will be used as a header name, and the value will be inserted in
+the headers of the article; if the value is @code{nil}, the header
+name will be removed. If the attribute name is @code{eval}, the form
+is evaluated, and the result is thrown away.
-The attribute value can be a string (used verbatim), a function (the
-return value will be used), a variable (its value will be used) or a
-list (it will be @code{eval}ed and the return value will be used).
+The attribute value can be a string (used verbatim), a function with
+zero arguments (the return value will be used), a variable (its value
+will be used) or a list (it will be @code{eval}ed and the return value
+will be used). The functions and sexps are called/@code{eval}ed in the
+message buffer that is being set up. The headers of the current article
+are available through the @code{message-reply-headers} variable, which
+is a vector of the following headers: number subject from date id
+references chars lines xref extra.
+
+@vindex message-reply-headers
If you wish to check whether the message you are about to compose is
meant to be a news article or a mail message, you can check the values
-of the two dynamically bound variables @code{message-this-is-news} and
-@code{message-this-is-mail}.
+of the @code{message-news-p} and @code{message-mail-p} functions.
-@vindex message-this-is-mail
-@vindex message-this-is-news
+@findex message-mail-p
+@findex message-news-p
So here's a new example:
(organization "People's Front Against MWM"))
("^rec.humor"
(signature my-funny-signature-randomizer))
- ((equal (system-name) "gnarly")
+ ((equal (system-name) "gnarly") ;; @r{A form}
(signature my-quote-randomizer))
- (message-this-is-news
+ (message-news-p ;; @r{A function symbol}
(signature my-news-signature))
- (posting-from-work-p
+ (window-system ;; @r{A value symbol}
+ ("X-Window-System" (format "%s" window-system)))
+ ;; @r{If I'm replying to Larsi, set the Organization header.}
+ ((header "from" "larsi.*org")
+ (Organization "Somewhere, Inc."))
+ ((posting-from-work-p) ;; @r{A user defined function}
(signature-file "~/.work-signature")
(address "user@@bar.foo")
(body "You are fired.\n\nSincerely, your boss.")
(organization "Important Work, Inc"))
+ ("nnml:.*"
+ (From (save-excursion
+ (set-buffer gnus-article-buffer)
+ (message-fetch-field "to"))))
("^nn.+:"
(signature-file "~/.mail-signature"))))
@end lisp
+The @samp{nnml:.*} rule means that you use the @code{To} address as the
+@code{From} address in all your outgoing replies, which might be handy
+if you fill many roles.
+
+Setting the @code{gnus-named-posting-styles} variable will make
+posting-styles allow to have distinctive names. You can specify an
+arbitrary posting-style when article posting with @kbd{S P} in the
+summary buffer. @code{gnus-named-posting-styles} is an alist which maps
+the names to styles. Once a posting-style is added to the alist, we can
+import it from @code{gnus-posting-styles}. If an attribute whose name
+is @code{import} is found, Gnus will look for the attribute value in
+@code{gnus-named-posting-styles} and expand it in place.
+
+Here's an example:
+
+@lisp
+(setq gnus-named-posting-styles
+ '(("Default"
+ (signature-file "~/.signature")
+ (name "User Name")
+ ("X-Home-Page" (getenv "WWW_HOME"))
+ (organization "People's Front Against MWM"))
+ ("Emacs"
+ (import "Default")
+ (organization "The Church of Emacs"))))
+@end lisp
+
+The posting-style named "Emacs" will inherit all the attributes from
+"Default" except @code{organization}.
+
@node Drafts
@section Drafts
other day, and send it when you feel its finished.
Well, don't worry about it. Whenever you start composing a message of
-some sort using the Gnus mail and post commands, the buffer you get will
+some sort using the gnus mail and post commands, the buffer you get will
automatically associate to an article in a special @dfn{draft} group.
If you save the buffer the normal way (@kbd{C-x C-s}, for instance), the
article will be saved there. (Auto-save files also go to the draft
If the group doesn't exist, it will be created and you'll be subscribed
to it. The only way to make it disappear from the Group buffer is to
-unsubscribe it.
+unsubscribe it. The special properties of the draft group comes from
+a group property (@pxref{Group Parameters}), and if lost the group
+behaves like any other group. This means the commands below will not
+be available. To restore the special properties of the group, the
+simplest way is to kill the group, using @kbd{C-k}, and restart
+Gnus. The group is automatically created again with the
+correct parameters. The content of the group is not lost.
@c @findex gnus-dissociate-buffer-from-draft
@c @kindex C-c M-d (Mail)
Articles}).
@findex gnus-draft-send-all-messages
+@kindex D s (Draft)
@findex gnus-draft-send-message
+@kindex D S (Draft)
If you have lots of rejected messages you want to post (or mail) without
doing further editing, you can use the @kbd{D s} command
(@code{gnus-draft-send-message}). This command understands the
command (@code{gnus-draft-send-all-messages}) will ship off all messages
in the buffer.
+@findex gnus-draft-toggle-sending
+@kindex D t (Draft)
If you have some messages that you wish not to send, you can use the
@kbd{D t} (@code{gnus-draft-toggle-sending}) command to mark the message
as unsendable. This is a toggling command.
@emph{there be demons}. Perhaps you have included too much cited text.
Perhaps the disk is full. Perhaps the server is down.
-These situations are, of course, totally beyond the control of Gnus.
+These situations are, of course, totally beyond the control of gnus.
(Gnus, of course, loves the way you look, always feels great, has angels
fluttering around inside of it, doesn't care about how much cited text
-you include, never runs full and never goes down.) So Gnus saves these
+you include, never runs full and never goes down.) So gnus saves these
articles until some later time when the server feels better.
The rejected articles will automatically be put in a special draft group
(@pxref{Drafts}). When the server comes back up again, you'd then
typically enter that group and send all the articles off.
+@node Signing and encrypting
+@section Signing and encrypting
+@cindex using gpg
+@cindex using s/mime
+@cindex using smime
+
+Gnus can digitally sign and encrypt your messages, using vanilla
+@acronym{PGP} format or @acronym{PGP/MIME} or @acronym{S/MIME}. For
+decoding such messages, see the @code{mm-verify-option} and
+@code{mm-decrypt-option} options (@pxref{Security}).
+
+@vindex gnus-message-replysign
+@vindex gnus-message-replyencrypt
+@vindex gnus-message-replysignencrypted
+Often, you would like to sign replies to people who send you signed
+messages. Even more often, you might want to encrypt messages which
+are in reply to encrypted messages. Gnus offers
+@code{gnus-message-replysign} to enable the former, and
+@code{gnus-message-replyencrypt} for the latter. In addition, setting
+@code{gnus-message-replysignencrypted} (on by default) will sign
+automatically encrypted messages.
+
+Instructing @acronym{MML} to perform security operations on a
+@acronym{MIME} part is done using the @kbd{C-c C-m s} key map for
+signing and the @kbd{C-c C-m c} key map for encryption, as follows.
+
+@table @kbd
+
+@item C-c C-m s s
+@kindex C-c C-m s s (Message)
+@findex mml-secure-message-sign-smime
+
+Digitally sign current message using @acronym{S/MIME}.
+
+@item C-c C-m s o
+@kindex C-c C-m s o (Message)
+@findex mml-secure-message-sign-pgp
+
+Digitally sign current message using @acronym{PGP}.
+
+@item C-c C-m s p
+@kindex C-c C-m s p (Message)
+@findex mml-secure-message-sign-pgp
+
+Digitally sign current message using @acronym{PGP/MIME}.
+
+@item C-c C-m c s
+@kindex C-c C-m c s (Message)
+@findex mml-secure-message-encrypt-smime
+
+Digitally encrypt current message using @acronym{S/MIME}.
+
+@item C-c C-m c o
+@kindex C-c C-m c o (Message)
+@findex mml-secure-message-encrypt-pgp
+
+Digitally encrypt current message using @acronym{PGP}.
+
+@item C-c C-m c p
+@kindex C-c C-m c p (Message)
+@findex mml-secure-message-encrypt-pgpmime
+
+Digitally encrypt current message using @acronym{PGP/MIME}.
+
+@item C-c C-m C-n
+@kindex C-c C-m C-n (Message)
+@findex mml-unsecure-message
+Remove security related @acronym{MML} tags from message.
+
+@end table
+
+@xref{Security, ,Security, message, Message Manual}, for more information.
@node Select Methods
@chapter Select Methods
A @dfn{foreign group} is a group not read by the usual (or
default) means. It could be, for instance, a group from a different
-@sc{nntp} server, it could be a virtual group, or it could be your own
+@acronym{NNTP} server, it could be a virtual group, or it could be your own
personal mail group.
A foreign group (or any group, really) is specified by a @dfn{name} and
a @dfn{select method}. To take the latter first, a select method is a
-list where the first element says what backend to use (e.g. @code{nntp},
+list where the first element says what back end to use (e.g. @code{nntp},
@code{nnspool}, @code{nnml}) and the second element is the @dfn{server
name}. There may be additional elements in the select method, where the
-value may have special meaning for the backend in question.
+value may have special meaning for the back end in question.
One could say that a select method defines a @dfn{virtual server}---so
-we do just that (@pxref{The Server Buffer}).
+we do just that (@pxref{Server Buffer}).
-The @dfn{name} of the group is the name the backend will recognize the
+The @dfn{name} of the group is the name the back end will recognize the
group as.
-For instance, the group @samp{soc.motss} on the @sc{nntp} server
+For instance, the group @samp{soc.motss} on the @acronym{NNTP} server
@samp{some.where.edu} will have the name @samp{soc.motss} and select
method @code{(nntp "some.where.edu")}. Gnus will call this group
@samp{nntp+some.where.edu:soc.motss}, even though the @code{nntp}
-backend just knows this group as @samp{soc.motss}.
+back end just knows this group as @samp{soc.motss}.
The different methods all have their peculiarities, of course.
@menu
-* The Server Buffer:: Making and editing virtual servers.
-* Getting News:: Reading USENET news with Gnus.
-* Getting Mail:: Reading your personal mail with Gnus.
-* Other Sources:: Reading directories, files, SOUP packets.
-* Combined Groups:: Combining groups into one group.
-* Gnus Unplugged:: Reading news and mail offline.
+* Server Buffer:: Making and editing virtual servers.
+* Getting News:: Reading USENET news with Gnus.
+* Getting Mail:: Reading your personal mail with Gnus.
+* Browsing the Web:: Getting messages from a plethora of Web sources.
+* IMAP:: Using Gnus as a @acronym{IMAP} client.
+* Other Sources:: Reading directories, files, SOUP packets.
+* Combined Groups:: Combining groups into one group.
+* Gnus Unplugged:: Reading news and mail offline.
@end menu
-@node The Server Buffer
-@section The Server Buffer
+@node Server Buffer
+@section Server Buffer
Traditionally, a @dfn{server} is a machine or a piece of software that
one connects to, and then requests information from. Gnus does not
connect directly to any real servers, but does all transactions through
-one backend or other. But that's just putting one layer more between
+one back end or other. But that's just putting one layer more between
the actual media and Gnus, so we might just as well say that each
-backend represents a virtual server.
+back end represents a virtual server.
-For instance, the @code{nntp} backend may be used to connect to several
-different actual @sc{nntp} servers, or, perhaps, to many different ports
-on the same actual @sc{nntp} server. You tell Gnus which backend to
+For instance, the @code{nntp} back end may be used to connect to several
+different actual @acronym{NNTP} servers, or, perhaps, to many different ports
+on the same actual @acronym{NNTP} server. You tell Gnus which back end to
use, and what parameters to set by specifying a @dfn{select method}.
These select method specifications can sometimes become quite
complicated---say, for instance, that you want to read from the
-@sc{nntp} server @samp{news.funet.fi} on port number 13, which
-hangs if queried for @sc{nov} headers and has a buggy select. Ahem.
-Anyways, if you had to specify that for each group that used this
+@acronym{NNTP} server @samp{news.funet.fi} on port number 13, which
+hangs if queried for @acronym{NOV} headers and has a buggy select. Ahem.
+Anyway, if you had to specify that for each group that used this
server, that would be too much work, so Gnus offers a way of naming
select methods, which is what you do in the server buffer.
(@code{gnus-group-enter-server-mode}) command in the group buffer.
@menu
-* Server Buffer Format:: You can customize the look of this buffer.
-* Server Commands:: Commands to manipulate servers.
-* Example Methods:: Examples server specifications.
-* Creating a Virtual Server:: An example session.
-* Server Variables:: Which variables to set.
-* Servers and Methods:: You can use server names as select methods.
-* Unavailable Servers:: Some servers you try to contact may be down.
+* Server Buffer Format:: You can customize the look of this buffer.
+* Server Commands:: Commands to manipulate servers.
+* Example Methods:: Examples server specifications.
+* Creating a Virtual Server:: An example session.
+* Server Variables:: Which variables to set.
+* Servers and Methods:: You can use server names as select methods.
+* Unavailable Servers:: Some servers you try to contact may be down.
@end menu
@vindex gnus-server-mode-hook
@table @samp
@item h
-How the news is fetched---the backend name.
+How the news is fetched---the back end name.
@item n
The name of this server.
@findex gnus-server-regenerate-server
Request that the server regenerate all its data structures
(@code{gnus-server-regenerate-server}). This can be useful if you have
-a mail backend that has gotten out of synch.
+a mail back end that has gotten out of sync.
@end table
@end lisp
As you can see, the first element in a select method is the name of the
-backend, and the second is the @dfn{address}, or @dfn{name}, if you
+back end, and the second is the @dfn{address}, or @dfn{name}, if you
will.
After these two elements, there may be an arbitrary number of
-@var{(variable form)} pairs.
+@code{(@var{variable} @var{form})} pairs.
To go back to the first example---imagine that you want to read from
port 15 on that machine. This is what the select method should
(nntp "news.funet.fi" (nntp-port-number 15))
@end lisp
-You should read the documentation to each backend to find out what
+You should read the documentation to each back end to find out what
variables are relevant, but here's an @code{nnmh} example:
-@code{nnmh} is a mail backend that reads a spool-like structure. Say
+@code{nnmh} is a mail back end that reads a spool-like structure. Say
you have two structures that you wish to access: One is your private
mail spool, and the other is a public one. Here's the possible spec for
your private mail:
(nnmh-get-new-mail nil))
@end lisp
-If you are behind a firewall and only have access to the @sc{nntp}
+@cindex proxy
+@cindex firewall
+
+If you are behind a firewall and only have access to the @acronym{NNTP}
server from the firewall machine, you can instruct Gnus to @code{rlogin}
-on the firewall machine and telnet from there to the @sc{nntp} server.
+on the firewall machine and telnet from there to the @acronym{NNTP} server.
Doing this can be rather fiddly, but your virtual server definition
should probably look something like this:
@lisp
(nntp "firewall"
- (nntp-address "the.firewall.machine")
- (nntp-open-connection-function nntp-open-rlogin)
- (nntp-end-of-line "\n")
- (nntp-rlogin-parameters
- ("telnet" "the.real.nntp.host" "nntp")))
+ (nntp-open-connection-function nntp-open-via-rlogin-and-telnet)
+ (nntp-via-address "the.firewall.machine")
+ (nntp-address "the.real.nntp.host")
+ (nntp-end-of-line "\n"))
@end lisp
If you want to use the wonderful @code{ssh} program to provide a
-compressed connection over the modem line, you could create a virtual
-server that would look something like this:
+compressed connection over the modem line, you could add the following
+configuration to the example above:
+
+@lisp
+ (nntp-via-rlogin-command "ssh")
+@end lisp
+
+See also @code{nntp-via-rlogin-command-switches}.
+
+If you're behind a firewall, but have direct access to the outside world
+through a wrapper command like "runsocks", you could open a socksified
+telnet connection to the news server as follows:
@lisp
-(nntp "news"
- (nntp-address "copper.uio.no")
- (nntp-rlogin-program "ssh")
- (nntp-open-connection-function nntp-open-rlogin)
- (nntp-end-of-line "\n")
- (nntp-rlogin-parameters
- ("telnet" "news.uio.no" "nntp")))
+(nntp "outside"
+ (nntp-pre-command "runsocks")
+ (nntp-open-connection-function nntp-open-via-telnet)
+ (nntp-address "the.news.server")
+ (nntp-end-of-line "\n"))
@end lisp
This means that you have to have set up @code{ssh-agent} correctly to
articles, you may want to create a virtual server to read the cache.
First you need to add a new server. The @kbd{a} command does that. It
-would probably be best to use @code{nnspool} to read the cache. You
-could also use @code{nnml} or @code{nnmh}, though.
+would probably be best to use @code{nnml} to read the cache. You
+could also use @code{nnspool} or @code{nnmh}, though.
-Type @kbd{a nnspool RET cache RET}.
+Type @kbd{a nnml RET cache RET}.
-You should now have a brand new @code{nnspool} virtual server called
+You should now have a brand new @code{nnml} virtual server called
@samp{cache}. You now need to edit it to have the right definitions.
Type @kbd{e} to edit the server. You'll be entered into a buffer that
will contain the following:
@lisp
-(nnspool "cache")
+(nnml "cache")
@end lisp
Change that to:
@lisp
-(nnspool "cache"
- (nnspool-spool-directory "~/News/cache/")
- (nnspool-nov-directory "~/News/cache/")
- (nnspool-active-file "~/News/cache/active"))
+(nnml "cache"
+ (nnml-directory "~/News/cache/")
+ (nnml-active-file "~/News/cache/active"))
@end lisp
Type @kbd{C-c C-c} to return to the server buffer. If you now press
@node Server Variables
@subsection Server Variables
+@cindex server variables
+@cindex server parameters
-One sticky point when defining variables (both on backends and in Emacs
+One sticky point when defining variables (both on back ends and in Emacs
in general) is that some variables are typically initialized from other
variables when the definition of the variables is being loaded. If you
-change the "base" variable after the variables have been loaded, you
-won't change the "derived" variables.
+change the ``base'' variable after the variables have been loaded, you
+won't change the ``derived'' variables.
This typically affects directory and file variables. For instance,
@code{nnml-directory} is @file{~/Mail/} by default, and all @code{nnml}
new virtual @code{nnml} server, it will @emph{not} suffice to set just
@code{nnml-directory}---you have to explicitly set all the file
variables to be what you want them to be. For a complete list of
-variables for each backend, see each backend's section later in this
+variables for each back end, see each back end's section later in this
manual, but here's an example @code{nnml} definition:
@lisp
(nnml-newsgroups-file "~/my-mail/newsgroups"))
@end lisp
+Server variables are often called @dfn{server parameters}.
@node Servers and Methods
@subsection Servers and Methods
So, what happens if the machine was only feeling unwell temporarily?
How do you test to see whether the machine has come up again?
-You jump to the server buffer (@pxref{The Server Buffer}) and poke it
+You jump to the server buffer (@pxref{Server Buffer}) and poke it
with the following commands:
@table @kbd
Remove all marks to whether Gnus was denied connection from any servers
(@code{gnus-server-remove-denials}).
+@item L
+@kindex L (Server)
+@findex gnus-server-offline-server
+Set server status to offline (@code{gnus-server-offline-server}).
+
@end table
@node Getting News
@section Getting News
@cindex reading news
-@cindex news backends
+@cindex news back ends
A newsreader is normally used for reading news. Gnus currently provides
-only two methods of getting news---it can read from an @sc{nntp} server,
+only two methods of getting news---it can read from an @acronym{NNTP} server,
or it can read from a local spool.
@menu
-* NNTP:: Reading news from an @sc{nntp} server.
-* News Spool:: Reading news from the local spool.
+* NNTP:: Reading news from an @acronym{NNTP} server.
+* News Spool:: Reading news from the local spool.
@end menu
@node NNTP
-@subsection @sc{nntp}
+@subsection NNTP
@cindex nntp
-Subscribing to a foreign group from an @sc{nntp} server is rather easy.
-You just specify @code{nntp} as method and the address of the @sc{nntp}
+Subscribing to a foreign group from an @acronym{NNTP} server is rather easy.
+You just specify @code{nntp} as method and the address of the @acronym{NNTP}
server as the, uhm, address.
-If the @sc{nntp} server is located at a non-standard port, setting the
+If the @acronym{NNTP} server is located at a non-standard port, setting the
third element of the select method to this port number should allow you
to connect to the right port. You'll have to edit the group info for
that (@pxref{Foreign Groups}).
@findex nntp-send-authinfo
@findex nntp-send-mode-reader
is run after a connection has been made. It can be used to send
-commands to the @sc{nntp} server after it has been contacted. By
+commands to the @acronym{NNTP} server after it has been contacted. By
default it sends the command @code{MODE READER} to the server with the
@code{nntp-send-mode-reader} function. This function should always be
present in this hook.
@vindex nntp-authinfo-function
@findex nntp-send-authinfo
@vindex nntp-authinfo-file
-This function will be used to send @samp{AUTHINFO} to the @sc{nntp}
+This function will be used to send @samp{AUTHINFO} to the @acronym{NNTP}
server. The default function is @code{nntp-send-authinfo}, which looks
through your @file{~/.authinfo} (or whatever you've set the
@code{nntp-authinfo-file} variable to) for applicable entries. If none
The file contains one or more line, each of which define one server.
@item
-Each line may contain an arbitrary number of token/value pairs. The
-valid tokens include @samp{machine}, @samp{login}, @samp{password},
-@samp{default} and @samp{force}. (The latter is not a valid
-@file{.netrc}/@code{ftp} token, which is the only way the
-@file{.authinfo} file format deviates from the @file{.netrc} file
-format.)
+Each line may contain an arbitrary number of token/value pairs.
+
+The valid tokens include @samp{machine}, @samp{login}, @samp{password},
+@samp{default}. In addition Gnus introduces two new tokens, not present
+in the original @file{.netrc}/@code{ftp} syntax, namely @samp{port} and
+@samp{force}. (This is the only way the @file{.authinfo} file format
+deviates from the @file{.netrc} file format.) @samp{port} is used to
+indicate what port on the server the credentials apply to and
+@samp{force} is explained below.
@end enumerate
@lisp
'(("nntpd 1\\.5\\.11t"
- (remove-hook 'nntp-server-opened-hook 'nntp-send-mode-reader)))
+ (remove-hook 'nntp-server-opened-hook
+ 'nntp-send-mode-reader)))
@end lisp
This ensures that Gnus doesn't send the @code{MODE READER} command to
@item nntp-maximum-request
@vindex nntp-maximum-request
-If the @sc{nntp} server doesn't support @sc{nov} headers, this backend
+If the @acronym{NNTP} server doesn't support @acronym{NOV} headers, this back end
will collect headers by sending a series of @code{head} commands. To
-speed things up, the backend sends lots of these commands without
+speed things up, the back end sends lots of these commands without
waiting for reply, and then reads all the replies. This is controlled
by the @code{nntp-maximum-request} variable, and is 400 by default. If
your network is buggy, you should set this to 1.
@item nntp-connection-timeout
@vindex nntp-connection-timeout
If you have lots of foreign @code{nntp} groups that you connect to
-regularly, you're sure to have problems with @sc{nntp} servers not
+regularly, you're sure to have problems with @acronym{NNTP} servers not
responding properly, or being too loaded to reply within reasonable
time. This is can lead to awkward problems, which can be helped
somewhat by setting @code{nntp-connection-timeout}. This is an integer
-that says how many seconds the @code{nntp} backend should wait for a
+that says how many seconds the @code{nntp} back end should wait for a
connection before giving up. If it is @code{nil}, which is the default,
no timeouts are done.
@c @cindex dynamic IP addresses
@c If you're running Gnus on a machine that has a dynamically assigned
@c address, Gnus may become confused. If the address of your machine
-@c changes after connecting to the @sc{nntp} server, Gnus will simply sit
+@c changes after connecting to the @acronym{NNTP} server, Gnus will simply sit
@c waiting forever for replies from the server. To help with this
@c unfortunate problem, you can set this command to a number. Gnus will
@c then, if it sits waiting for a reply from the server longer than that
@item nntp-server-hook
@vindex nntp-server-hook
-This hook is run as the last step when connecting to an @sc{nntp}
+This hook is run as the last step when connecting to an @acronym{NNTP}
server.
-@findex nntp-open-rlogin
-@findex nntp-open-telnet
-@findex nntp-open-network-stream
-@item nntp-open-connection-function
-@vindex nntp-open-connection-function
-This function is used to connect to the remote system. Four pre-made
-functions are supplied:
+@item nntp-buggy-select
+@vindex nntp-buggy-select
+Set this to non-@code{nil} if your select routine is buggy.
-@table @code
-@item nntp-open-network-stream
-This is the default, and simply connects to some port or other on the
-remote system.
+@item nntp-nov-is-evil
+@vindex nntp-nov-is-evil
+If the @acronym{NNTP} server does not support @acronym{NOV}, you could set this
+variable to @code{t}, but @code{nntp} usually checks automatically whether @acronym{NOV}
+can be used.
-@item nntp-open-rlogin
-Does an @samp{rlogin} on the
-remote system, and then does a @samp{telnet} to the @sc{nntp} server
-available there.
+@item nntp-xover-commands
+@vindex nntp-xover-commands
+@cindex @acronym{NOV}
+@cindex XOVER
+List of strings used as commands to fetch @acronym{NOV} lines from a
+server. The default value of this variable is @code{("XOVER"
+"XOVERVIEW")}.
-@code{nntp-open-rlogin}-related variables:
+@item nntp-nov-gap
+@vindex nntp-nov-gap
+@code{nntp} normally sends just one big request for @acronym{NOV} lines to
+the server. The server responds with one huge list of lines. However,
+if you have read articles 2-5000 in the group, and only want to read
+article 1 and 5001, that means that @code{nntp} will fetch 4999 @acronym{NOV}
+lines that you will not need. This variable says how
+big a gap between two consecutive articles is allowed to be before the
+@code{XOVER} request is split into several request. Note that if your
+network is fast, setting this variable to a really small number means
+that fetching will probably be slower. If this variable is @code{nil},
+@code{nntp} will never split requests. The default is 5.
-@table @code
+@item nntp-prepare-server-hook
+@vindex nntp-prepare-server-hook
+A hook run before attempting to connect to an @acronym{NNTP} server.
-@item nntp-rlogin-program
-@vindex nntp-rlogin-program
-Program used to log in on remote machines. The default is @samp{rsh},
-but @samp{ssh} is a popular alternative.
+@item nntp-warn-about-losing-connection
+@vindex nntp-warn-about-losing-connection
+If this variable is non-@code{nil}, some noise will be made when a
+server closes connection.
-@item nntp-rlogin-parameters
-@vindex nntp-rlogin-parameters
-This list will be used as the parameter list given to @code{rsh}.
+@item nntp-record-commands
+@vindex nntp-record-commands
+If non-@code{nil}, @code{nntp} will log all commands it sends to the
+@acronym{NNTP} server (along with a timestamp) in the @samp{*nntp-log*}
+buffer. This is useful if you are debugging a Gnus/@acronym{NNTP} connection
+that doesn't seem to work.
-@item nntp-rlogin-user-name
-@vindex nntp-rlogin-user-name
-User name on the remote system.
+@item nntp-open-connection-function
+@vindex nntp-open-connection-function
+It is possible to customize how the connection to the nntp server will
+be opened. If you specify an @code{nntp-open-connection-function}
+parameter, Gnus will use that function to establish the connection.
+Five pre-made functions are supplied. These functions can be grouped in
+two categories: direct connection functions (three pre-made), and
+indirect ones (two pre-made).
+
+@item nntp-prepare-post-hook
+@vindex nntp-prepare-post-hook
+A hook run just before posting an article. If there is no
+@code{Message-ID} header in the article and the news server provides the
+recommended ID, it will be added to the article before running this
+hook. It is useful to make @code{Cancel-Lock} headers even if you
+inhibit Gnus to add a @code{Message-ID} header, you could say:
-@end table
+@lisp
+(add-hook 'nntp-prepare-post-hook 'canlock-insert-header)
+@end lisp
-@item nntp-open-telnet
-Does a @samp{telnet} to the remote system and then another @samp{telnet}
-to get to the @sc{nntp} server.
+Note that not all servers support the recommended ID. This works for
+INN versions 2.3.0 and later, for instance.
+
+@item nntp-read-timeout
+@vindex nntp-read-timeout
+How long nntp should wait between checking for the end of output.
+Shorter values mean quicker response, but is more CPU intensive. The
+default is 0.1 seconds. If you have a slow line to the server (and
+don't like to see Emacs eat your available CPU power), you might set
+this to, say, 1.
+
+@item nntp-list-options
+@vindex nntp-list-options
+List of newsgroup name used for a option of the LIST command to restrict
+the listing output to only the specified newsgroups. Each newsgroup name
+can be a shell-style wildcard, for instance, @dfn{fj.*}, @dfn{japan.*},
+etc. Fortunately, if the server can accept such a option, it will
+probably make gnus run faster. You may use it as a server variable as
+follows:
-@code{nntp-open-telnet}-related variables:
+@lisp
+(setq gnus-select-method
+ '(nntp "news.somewhere.edu"
+ (nntp-list-options ("fj.*" "japan.*"))))
+@end lisp
-@table @code
-@item nntp-telnet-command
-@vindex nntp-telnet-command
-Command used to start @code{telnet}.
+@item nntp-options-subscribe
+@vindex nntp-options-subscribe
+Regexp matching the newsgroup names which will be subscribed
+unconditionally. Use @dfn{ } instead of @dfn{$} for a regexp string.
+It may be effective as well as @code{nntp-list-options} even though the
+server could not accept a shell-style wildcard as a option of the LIST
+command. You may use it as a server variable as follows:
-@item nntp-telnet-switches
-@vindex nntp-telnet-switches
-List of strings to be used as the switches to the @code{telnet} command.
+@lisp
+(setq gnus-select-method
+ '(nntp "news.somewhere.edu"
+ (nntp-options-subscribe "^fj\\.\\|^japan\\.")))
+@end lisp
-@item nntp-telnet-user-name
-@vindex nntp-telnet-user-name
-User name for log in on the remote system.
+@item nntp-options-not-subscribe
+@vindex nntp-options-not-subscribe
+Regexp matching the newsgroup names which will not be subscribed
+unconditionally. Use @dfn{ } instead of @dfn{$} for a regexp string.
+It may be effective as well as @code{nntp-list-options} even though the
+server could not accept a shell-style wildcard as a option of the LIST
+command. You may use it as a server variable as follows:
+
+@lisp
+(setq gnus-select-method
+ '(nntp "news.somewhere.edu"
+ (nntp-options-not-subscribe "\\.binaries\\.")))
+@end lisp
+@end table
-@item nntp-telnet-passwd
-@vindex nntp-telnet-passwd
-Password to use when logging in.
+@menu
+* Direct Functions:: Connecting directly to the server.
+* Indirect Functions:: Connecting indirectly to the server.
+* Common Variables:: Understood by several connection functions.
+@end menu
-@item nntp-telnet-parameters
-@vindex nntp-telnet-parameters
-A list of strings executed as a command after logging in
-via @code{telnet}.
-@item nntp-telnet-shell-prompt
-@vindex nntp-telnet-shell-prompt
-Regexp matching the shell prompt on the remote machine. The default is
-@samp{bash\\|\$ *\r?$\\|> *\r?}.
+@node Direct Functions
+@subsubsection Direct Functions
+@cindex direct connection functions
-@item nntp-open-telnet-envuser
-@vindex nntp-open-telnet-envuser
-If non-@code{nil}, the @code{telnet} session (client and server both)
-will support the @code{ENVIRON} option and not prompt for login name.
-This works for Solaris @code{telnet}, for instance.
+These functions are called direct because they open a direct connection
+between your machine and the @acronym{NNTP} server. The behavior of these
+functions is also affected by commonly understood variables
+(@pxref{Common Variables}).
-@end table
+@table @code
+@findex nntp-open-network-stream
+@item nntp-open-network-stream
+This is the default, and simply connects to some port or other on the
+remote system.
+
+@findex nntp-open-tls-stream
+@item nntp-open-tls-stream
+Opens a connection to a server over a @dfn{secure} channel. To use
+this you must have @uref{http://www.gnu.org/software/gnutls/, GNUTLS}
+installed. You then define a server as follows:
+
+@lisp
+;; @r{"nntps" is port 563 and is predefined in our @file{/etc/services}}
+;; @r{however, @samp{gnutls-cli -p} doesn't like named ports.}
+;;
+(nntp "snews.bar.com"
+ (nntp-open-connection-function nntp-open-tls-stream)
+ (nntp-port-number )
+ (nntp-address "snews.bar.com"))
+@end lisp
@findex nntp-open-ssl-stream
@item nntp-open-ssl-stream
-Opens a connection to a server over a @dfn{secure} channel. To use this
-you must have SSLay installed
-(@file{ftp://ftp.psy.uq.oz.au/pub/Crypto/SSL}, and you also need
-@file{ssl.el} (from the W3 distributeion, for instance). You then
-define a server as follows:
+Opens a connection to a server over a @dfn{secure} channel. To use
+this you must have @uref{http://www.openssl.org, OpenSSL} or
+@uref{ftp://ftp.psy.uq.oz.au/pub/Crypto/SSL, SSLeay} installed. You
+then define a server as follows:
@lisp
-;; Type `C-c C-c' after you've finished editing.
-;;
-;; "snews" is port 563 and is predefined in our /etc/services
+;; @r{"snews" is port 563 and is predefined in our @file{/etc/services}}
+;; @r{however, @samp{openssl s_client -port} doesn't like named ports.}
;;
(nntp "snews.bar.com"
(nntp-open-connection-function nntp-open-ssl-stream)
- (nntp-port-number "snews")
+ (nntp-port-number 563)
(nntp-address "snews.bar.com"))
@end lisp
+@findex nntp-open-telnet-stream
+@item nntp-open-telnet-stream
+Opens a connection to an @acronym{NNTP} server by simply @samp{telnet}'ing
+it. You might wonder why this function exists, since we have the
+default @code{nntp-open-network-stream} which would do the job. (One
+of) the reason(s) is that if you are behind a firewall but have direct
+connections to the outside world thanks to a command wrapper like
+@code{runsocks}, you can use it like this:
+
+@lisp
+(nntp "socksified"
+ (nntp-pre-command "runsocks")
+ (nntp-open-connection-function nntp-open-telnet-stream)
+ (nntp-address "the.news.server"))
+@end lisp
+
+With the default method, you would need to wrap your whole Emacs
+session, which is not a good idea.
@end table
-@item nntp-end-of-line
-@vindex nntp-end-of-line
-String to use as end-of-line marker when talking to the @sc{nntp}
-server. This is @samp{\r\n} by default, but should be @samp{\n} when
-using @code{rlogin} to talk to the server.
-@item nntp-rlogin-user-name
-@vindex nntp-rlogin-user-name
-User name on the remote system when using the @code{rlogin} connect
-function.
+@node Indirect Functions
+@subsubsection Indirect Functions
+@cindex indirect connection functions
-@item nntp-address
-@vindex nntp-address
-The address of the remote system running the @sc{nntp} server.
+These functions are called indirect because they connect to an
+intermediate host before actually connecting to the @acronym{NNTP} server.
+All of these functions and related variables are also said to belong to
+the ``via'' family of connection: they're all prefixed with ``via'' to make
+things cleaner. The behavior of these functions is also affected by
+commonly understood variables (@pxref{Common Variables}).
-@item nntp-port-number
-@vindex nntp-port-number
-Port number to connect to when using the @code{nntp-open-network-stream}
-connect function.
+@table @code
+@item nntp-open-via-rlogin-and-telnet
+@findex nntp-open-via-rlogin-and-telnet
+Does an @samp{rlogin} on a remote system, and then does a @samp{telnet}
+to the real @acronym{NNTP} server from there. This is useful for instance if
+you need to connect to a firewall machine first.
-@item nntp-buggy-select
-@vindex nntp-buggy-select
-Set this to non-@code{nil} if your select routine is buggy.
+@code{nntp-open-via-rlogin-and-telnet}-specific variables:
-@item nntp-nov-is-evil
-@vindex nntp-nov-is-evil
-If the @sc{nntp} server does not support @sc{nov}, you could set this
-variable to @code{t}, but @code{nntp} usually checks automatically whether @sc{nov}
-can be used.
+@table @code
+@item nntp-via-rlogin-command
+@vindex nntp-via-rlogin-command
+Command used to log in on the intermediate host. The default is
+@samp{rsh}, but @samp{ssh} is a popular alternative.
+
+@item nntp-via-rlogin-command-switches
+@vindex nntp-via-rlogin-command-switches
+List of strings to be used as the switches to
+@code{nntp-via-rlogin-command}. The default is @code{nil}. If you use
+@samp{ssh} for @code{nntp-via-rlogin-command}, you may set this to
+@samp{("-C")} in order to compress all data connections, otherwise set
+this to @samp{("-t" "-e" "none")} or @samp{("-C" "-t" "-e" "none")} if
+the telnet command requires a pseudo-tty allocation on an intermediate
+host.
+@end table
-@item nntp-xover-commands
-@vindex nntp-xover-commands
-@cindex nov
-@cindex XOVER
-List of strings used as commands to fetch @sc{nov} lines from a
-server. The default value of this variable is @code{("XOVER"
-"XOVERVIEW")}.
+Note that you may want to change the value for @code{nntp-end-of-line}
+to @samp{\n} (@pxref{Common Variables}).
-@item nntp-nov-gap
-@vindex nntp-nov-gap
-@code{nntp} normally sends just one big request for @sc{nov} lines to
-the server. The server responds with one huge list of lines. However,
-if you have read articles 2-5000 in the group, and only want to read
-article 1 and 5001, that means that @code{nntp} will fetch 4999 @sc{nov}
-lines that you will not need. This variable says how
-big a gap between two consecutive articles is allowed to be before the
-@code{XOVER} request is split into several request. Note that if your
-network is fast, setting this variable to a really small number means
-that fetching will probably be slower. If this variable is @code{nil},
-@code{nntp} will never split requests. The default is 5.
+@item nntp-open-via-rlogin-and-netcat
+@findex nntp-open-via-rlogin-and-netcat
+Does essentially the same, but uses @samp{netcat}
+(@uref{http://netcat.sourceforge.net/}) instead of @samp{telnet} to
+connect to the real @acronym{NNTP} server from the intermediate host.
-@item nntp-prepare-server-hook
-@vindex nntp-prepare-server-hook
-A hook run before attempting to connect to an @sc{nntp} server.
+@code{nntp-open-via-rlogin-and-netcat}-specific variables:
-@item nntp-warn-about-losing-connection
-@vindex nntp-warn-about-losing-connection
-If this variable is non-@code{nil}, some noise will be made when a
-server closes connection.
+@table @code
+@item nntp-via-netcat-command
+@vindex nntp-via-netcat-command
+Command used to connect to the real @acronym{NNTP} server from the
+intermediate host. The default is @samp{nc}. You can also use other
+programs like @samp{connect}
+(@uref{http://www.imasy.or.jp/~gotoh/ssh/connect.html}) instead.
+
+@item nntp-via-netcat-switches
+@vindex nntp-via-netcat-switches
+List of strings to be used as the switches to the
+@code{nntp-via-telnet-command} command. The default is @code{nil}.
+
+@item nntp-via-rlogin-command
+Command used to log in on the intermediate host. The default is
+@samp{rsh}, but @samp{ssh} is a popular alternative.
+
+@item nntp-via-rlogin-command-switches
+List of strings to be used as the switches to
+@code{nntp-via-rlogin-command}. The default is @code{nil}.
+@end table
-@item nntp-record-commands
-@vindex nntp-record-commands
-If non-@code{nil}, @code{nntp} will log all commands it sends to the
-@sc{nntp} server (along with a timestep) in the @samp{*nntp-log*}
-buffer. This is useful if you are debugging a Gnus/@sc{nntp} connection
-that doesn't seem to work.
+@item nntp-open-via-telnet-and-telnet
+@findex nntp-open-via-telnet-and-telnet
+Does essentially also the same, but uses @samp{telnet} instead of
+@samp{rlogin} to connect to the intermediate host.
+
+@code{nntp-open-via-telnet-and-telnet}-specific variables:
+
+@table @code
+@item nntp-via-telnet-command
+@vindex nntp-via-telnet-command
+Command used to @code{telnet} the intermediate host. The default is
+@samp{telnet}.
+
+@item nntp-via-telnet-switches
+@vindex nntp-via-telnet-switches
+List of strings to be used as the switches to the
+@code{nntp-via-telnet-command} command. The default is @samp{("-8")}.
+
+@item nntp-via-user-password
+@vindex nntp-via-user-password
+Password to use when logging in on the intermediate host.
+
+@item nntp-via-envuser
+@vindex nntp-via-envuser
+If non-@code{nil}, the intermediate @code{telnet} session (client and
+server both) will support the @code{ENVIRON} option and not prompt for
+login name. This works for Solaris @code{telnet}, for instance.
+
+@item nntp-via-shell-prompt
+@vindex nntp-via-shell-prompt
+Regexp matching the shell prompt on the intermediate host. The default
+is @samp{bash\\|\$ *\r?$\\|> *\r?}.
+
+@end table
+
+Note that you may want to change the value for @code{nntp-end-of-line}
+to @samp{\n} (@pxref{Common Variables}).
+@end table
+
+
+Here are some additional variables that are understood by all the above
+functions:
+
+@table @code
+
+@item nntp-via-user-name
+@vindex nntp-via-user-name
+User name to use when connecting to the intermediate host.
+
+@item nntp-via-address
+@vindex nntp-via-address
+Address of the intermediate host to connect to.
+
+@end table
+
+
+@node Common Variables
+@subsubsection Common Variables
+
+The following variables affect the behavior of all, or several of the
+pre-made connection functions. When not specified, all functions are
+affected.
+
+@table @code
+
+@item nntp-pre-command
+@vindex nntp-pre-command
+A command wrapper to use when connecting through a non native
+connection function (all except @code{nntp-open-network-stream},
+@code{nntp-open-tls-stream}, and @code{nntp-open-ssl-stream}. This is
+where you would put a @samp{SOCKS} wrapper for instance.
+
+@item nntp-address
+@vindex nntp-address
+The address of the @acronym{NNTP} server.
+
+@item nntp-port-number
+@vindex nntp-port-number
+Port number to connect to the @acronym{NNTP} server. The default is
+@samp{nntp}. If you use @acronym{NNTP} over
+@acronym{TLS}/@acronym{SSL}, you may want to use integer ports rather
+than named ports (i.e, use @samp{563} instead of @samp{snews} or
+@samp{nntps}), because external @acronym{TLS}/@acronym{SSL} tools may
+not work with named ports.
+
+@item nntp-end-of-line
+@vindex nntp-end-of-line
+String to use as end-of-line marker when talking to the @acronym{NNTP}
+server. This is @samp{\r\n} by default, but should be @samp{\n} when
+using a non native telnet connection function.
+
+@item nntp-telnet-command
+@vindex nntp-telnet-command
+Command to use when connecting to the @acronym{NNTP} server through
+@samp{telnet}. This is @emph{not} for an intermediate host. This is
+just for the real @acronym{NNTP} server. The default is
+@samp{telnet}.
+
+@item nntp-telnet-switches
+@vindex nntp-telnet-switches
+A list of switches to pass to @code{nntp-telnet-command}. The default
+is @samp{("-8")}.
@end table
contain very big articles---@samp{alt.binaries.pictures.furniture}, for
instance.
-Anyways, you just specify @code{nnspool} as the method and @code{""} (or
+Anyway, you just specify @code{nnspool} as the method and @code{""} (or
anything else) as the address.
If you have access to a local spool, you should probably use that as the
@item nnspool-nov-directory
@vindex nnspool-nov-directory
-Where @code{nnspool} will look for @sc{nov} files. This is normally
+Where @code{nnspool} will look for @acronym{NOV} files. This is normally@*
@file{/usr/spool/news/over.view/}.
@item nnspool-lib-dir
@item nnspool-active-file
@vindex nnspool-active-file
-The path to the active file.
+The name of the active file.
@item nnspool-newsgroups-file
@vindex nnspool-newsgroups-file
-The path to the group descriptions file.
+The name of the group descriptions file.
@item nnspool-history-file
@vindex nnspool-history-file
-The path to the news history file.
+The name of the news history file.
@item nnspool-active-times-file
@vindex nnspool-active-times-file
-The path to the active date file.
+The name of the active date file.
@item nnspool-nov-is-evil
@vindex nnspool-nov-is-evil
-If non-@code{nil}, @code{nnspool} won't try to use any @sc{nov} files
+If non-@code{nil}, @code{nnspool} won't try to use any @acronym{NOV} files
that it finds.
@item nnspool-sift-nov-with-sed
@vindex nnspool-sift-nov-with-sed
@cindex sed
If non-@code{nil}, which is the default, use @code{sed} to get the
-relevant portion from the overview file. If nil, @code{nnspool} will
-load the entire file into a buffer and process it there.
+relevant portion from the overview file. If @code{nil},
+@code{nnspool} will load the entire file into a buffer and process it
+there.
@end table
course.
@menu
-* Getting Started Reading Mail:: A simple cookbook example.
-* Splitting Mail:: How to create mail groups.
-* Mail Backend Variables:: Variables for customizing mail handling.
-* Fancy Mail Splitting:: Gnus can do hairy splitting of incoming mail.
-* Mail and Procmail:: Reading mail groups that procmail create.
-* Incorporating Old Mail:: What about the old mail you have?
-* Expiring Mail:: Getting rid of unwanted mail.
-* Washing Mail:: Removing gruft from the mail you get.
-* Duplicates:: Dealing with duplicated mail.
-* Not Reading Mail:: Using mail backends for reading other files.
-* Choosing a Mail Backend:: Gnus can read a variety of mail formats.
+* Mail in a Newsreader:: Important introductory notes.
+* Getting Started Reading Mail:: A simple cookbook example.
+* Splitting Mail:: How to create mail groups.
+* Mail Sources:: How to tell Gnus where to get mail from.
+* Mail Back End Variables:: Variables for customizing mail handling.
+* Fancy Mail Splitting:: Gnus can do hairy splitting of incoming mail.
+* Group Mail Splitting:: Use group customize to drive mail splitting.
+* Incorporating Old Mail:: What about the old mail you have?
+* Expiring Mail:: Getting rid of unwanted mail.
+* Washing Mail:: Removing cruft from the mail you get.
+* Duplicates:: Dealing with duplicated mail.
+* Not Reading Mail:: Using mail back ends for reading other files.
+* Choosing a Mail Back End:: Gnus can read a variety of mail formats.
@end menu
+@node Mail in a Newsreader
+@subsection Mail in a Newsreader
+
+If you are used to traditional mail readers, but have decided to switch
+to reading mail with Gnus, you may find yourself experiencing something
+of a culture shock.
+
+Gnus does not behave like traditional mail readers. If you want to make
+it behave that way, you can, but it's an uphill battle.
+
+Gnus, by default, handles all its groups using the same approach. This
+approach is very newsreaderly---you enter a group, see the new/unread
+messages, and when you read the messages, they get marked as read, and
+you don't see them any more. (Unless you explicitly ask for them.)
+
+In particular, you do not do anything explicitly to delete messages.
+
+Does this mean that all the messages that have been marked as read are
+deleted? How awful!
+
+But, no, it means that old messages are @dfn{expired} according to some
+scheme or other. For news messages, the expire process is controlled by
+the news administrator; for mail, the expire process is controlled by
+you. The expire process for mail is covered in depth in @ref{Expiring
+Mail}.
+
+What many Gnus users find, after using it a while for both news and
+mail, is that the transport mechanism has very little to do with how
+they want to treat a message.
+
+Many people subscribe to several mailing lists. These are transported
+via @acronym{SMTP}, and are therefore mail. But we might go for weeks without
+answering, or even reading these messages very carefully. We may not
+need to save them because if we should need to read one again, they are
+archived somewhere else.
+
+Some people have local news groups which have only a handful of readers.
+These are transported via @acronym{NNTP}, and are therefore news. But we may need
+to read and answer a large fraction of the messages very carefully in
+order to do our work. And there may not be an archive, so we may need
+to save the interesting messages the same way we would personal mail.
+
+The important distinction turns out to be not the transport mechanism,
+but other factors such as how interested we are in the subject matter,
+or how easy it is to retrieve the message if we need to read it again.
+
+Gnus provides many options for sorting mail into ``groups'' which behave
+like newsgroups, and for treating each group (whether mail or news)
+differently.
+
+Some users never get comfortable using the Gnus (ahem) paradigm and wish
+that Gnus should grow up and be a male, er, mail reader. It is possible
+to whip Gnus into a more mailreaderly being, but, as said before, it's
+not easy. People who prefer proper mail readers should try @sc{vm}
+instead, which is an excellent, and proper, mail reader.
+
+I don't mean to scare anybody off, but I want to make it clear that you
+may be required to learn a new way of thinking about messages. After
+you've been subjected to The Gnus Way, you will come to love it. I can
+guarantee it. (At least the guy who sold me the Emacs Subliminal
+Brain-Washing Functions that I've put into Gnus did guarantee it. You
+Will Be Assimilated. You Love Gnus. You Love The Gnus Mail Way.
+You Do.)
+
+
@node Getting Started Reading Mail
@subsection Getting Started Reading Mail
It's quite easy to use Gnus to read your new mail. You just plonk the
-mail backend of your choice into @code{gnus-secondary-select-methods},
+mail back end of your choice into @code{gnus-secondary-select-methods},
and things will happen automatically.
-For instance, if you want to use @code{nnml} (which is a "one file per
-mail" backend), you could put the following in your @file{.gnus} file:
+For instance, if you want to use @code{nnml} (which is a ``one file per
+mail'' back end), you could put the following in your @file{~/.gnus.el} file:
@lisp
-(setq gnus-secondary-select-methods
- '((nnml "private")))
+(setq gnus-secondary-select-methods '((nnml "")))
@end lisp
-Now, the next time you start Gnus, this backend will be queried for new
+Now, the next time you start Gnus, this back end will be queried for new
articles, and it will move all the messages in your spool file to its
-directory, which is @code{~/Mail/} by default. The new group that will
+directory, which is @file{~/Mail/} by default. The new group that will
be created (@samp{mail.misc}) will be subscribed, and you can read it
like any other group.
This should be sufficient for reading mail with Gnus. You might want to
give the other sections in this part of the manual a perusal, though.
-Especially @pxref{Choosing a Mail Backend} and @pxref{Expiring Mail}.
+Especially @pxref{Choosing a Mail Back End} and @pxref{Expiring Mail}.
@node Splitting Mail
@subsection Splitting Mail
@cindex splitting mail
@cindex mail splitting
+@cindex mail filtering (splitting)
@vindex nnmail-split-methods
The @code{nnmail-split-methods} variable says how the incoming mail is
mail belongs in that group.
The last of these groups should always be a general one, and the regular
-expression should @emph{always} be @samp{} so that it matches any mails
+expression should @emph{always} be @samp{*} so that it matches any mails
that haven't been matched by any of the other regexps. (These rules are
processed from the beginning of the alist toward the end. The first
-rule to make a match will "win", unless you have crossposting enabled.
-In that case, all matching rules will "win".)
+rule to make a match will ``win'', unless you have crossposting enabled.
+In that case, all matching rules will ``win''.)
If you like to tinker with this yourself, you can set this variable to a
function of your choice. This function will be called without any
message. The function should return a list of group names that it
thinks should carry this mail message.
-Note that the mail backends are free to maul the poor, innocent,
+Note that the mail back ends are free to maul the poor, innocent,
incoming headers all they want to. They all add @code{Lines} headers;
some add @code{X-Gnus-Group} headers; most rename the Unix mbox
@code{From<SPACE>} line to something else.
@vindex nnmail-crosspost
-The mail backends all support cross-posting. If several regexps match,
+The mail back ends all support cross-posting. If several regexps match,
the mail will be ``cross-posted'' to all those groups.
@code{nnmail-crosspost} says whether to use this mechanism or not. Note
-that no articles are crossposted to the general (@samp{}) group.
+that no articles are crossposted to the general (@samp{*}) group.
@vindex nnmail-crosspost-link-function
@cindex crosspost
@code{nnmail-crosspost-link-function} to @code{copy-file}. (This
variable is @code{add-name-to-file} by default.)
-@findex nnmail-split-header-length-limit
-Header lines may be arbitrarily long. However, the longer a line is,
-the longer it takes to match them. Very long lines may lead to Gnus
-taking forever to split the mail, so Gnus excludes lines that are longer
-than @code{nnmail-split-header-length-limit} (which defaults to 1024).
-
@kindex M-x nnmail-split-history
-@kindex nnmail-split-history
+@findex nnmail-split-history
If you wish to see where the previous mail split put the messages, you
-can use the @kbd{M-x nnmail-split-history} command.
+can use the @kbd{M-x nnmail-split-history} command. If you wish to see
+where re-spooling messages would put the messages, you can use
+@code{gnus-summary-respool-trace} and related commands (@pxref{Mail
+Group Commands}).
+
+@vindex nnmail-split-header-length-limit
+Header lines longer than the value of
+@code{nnmail-split-header-length-limit} are excluded from the split
+function.
+
+@vindex nnmail-mail-splitting-charset
+@vindex nnmail-mail-splitting-decodes
+By default the splitting codes @acronym{MIME} decodes headers so you
+can match on non-@acronym{ASCII} strings. The
+@code{nnmail-mail-splitting-charset} variable specifies the default
+charset for decoding. The behaviour can be turned off completely by
+binding @code{nnmail-mail-splitting-decodes} to @code{nil}, which is
+useful if you want to match articles based on the raw header data.
+
+@vindex nnmail-resplit-incoming
+By default, splitting is performed on all incoming messages. If you
+specify a @code{directory} entry for the variable @code{mail-sources}
+(@pxref{Mail Source Specifiers}), however, then splitting does
+@emph{not} happen by default. You can set the variable
+@code{nnmail-resplit-incoming} to a non-@code{nil} value to make
+splitting happen even in this case. (This variable has no effect on
+other kinds of entries.)
Gnus gives you all the opportunity you could possibly want for shooting
yourself in the foot. Let's say you create a group that will contain
month's rent money.
-@node Mail Backend Variables
-@subsection Mail Backend Variables
+@node Mail Sources
+@subsection Mail Sources
-These variables are (for the most part) pertinent to all the various
-mail backends.
-
-@table @code
-@vindex nnmail-read-incoming-hook
-@item nnmail-read-incoming-hook
-The mail backends all call this hook after reading new mail. You can
-use this hook to notify any mail watch programs, if you want to.
+Mail can be gotten from many different sources---the mail spool, from
+a @acronym{POP} mail server, from a procmail directory, or from a
+maildir, for instance.
-@vindex nnmail-spool-file
-@item nnmail-spool-file
-@cindex POP mail
-@cindex MAILHOST
-@cindex movemail
-@vindex nnmail-pop-password
-@vindex nnmail-pop-password-required
-The backends will look for new mail in this file. If this variable is
-@code{nil}, the mail backends will never attempt to fetch mail by
-themselves. If you are using a POP mail server and your name is
-@samp{larsi}, you should set this variable to @samp{po:larsi}. If
-your name is not @samp{larsi}, you should probably modify that
-slightly, but you may have guessed that already, you smart & handsome
-devil! You can also set this variable to @code{pop}, and Gnus will try
-to figure out the POP mail string by itself. In any case, Gnus will
-call @code{movemail} which will contact the POP server named in the
-@code{MAILHOST} environment variable. If the POP server needs a
-password, you can either set @code{nnmail-pop-password-required} to
-@code{t} and be prompted for the password, or set
-@code{nnmail-pop-password} to the password itself.
-
-@code{nnmail-spool-file} can also be a list of mailboxes.
-
-Your Emacs has to have been configured with @samp{--with-pop} before
-compilation. This is the default, but some installations have it
-switched off.
-
-When you use a mail backend, Gnus will slurp all your mail from your
-inbox and plonk it down in your home directory. Gnus doesn't move any
-mail if you're not using a mail backend---you have to do a lot of magic
-invocations first. At the time when you have finished drawing the
-pentagram, lightened the candles, and sacrificed the goat, you really
-shouldn't be too surprised when Gnus moves your mail.
+@menu
+* Mail Source Specifiers:: How to specify what a mail source is.
+* Mail Source Customization:: Some variables that influence things.
+* Fetching Mail:: Using the mail source specifiers.
+@end menu
-@vindex nnmail-use-procmail
-@vindex nnmail-procmail-suffix
-@item nnmail-use-procmail
-If non-@code{nil}, the mail backends will look in
-@code{nnmail-procmail-directory} for incoming mail. All the files in
-that directory that have names ending in @code{nnmail-procmail-suffix}
-will be considered incoming mailboxes, and will be searched for new
-mail.
-@vindex nnmail-crash-box
-@item nnmail-crash-box
-When a mail backend reads a spool file, mail is first moved to this
-file, which is @file{~/.gnus-crash-box} by default. If this file
-already exists, it will always be read (and incorporated) before any
-other spool files.
+@node Mail Source Specifiers
+@subsubsection Mail Source Specifiers
+@cindex POP
+@cindex mail server
+@cindex procmail
+@cindex mail spool
+@cindex mail source
-@vindex nnmail-split-hook
-@item nnmail-split-hook
-@findex article-decode-encoded-words
-@findex RFC1522 decoding
-@findex RFC2047 decoding
-Hook run in the buffer where the mail headers of each message is kept
-just before the splitting based on these headers is done. The hook is
-free to modify the buffer contents in any way it sees fit---the buffer
-is discarded after the splitting has been done, and no changes performed
-in the buffer will show up in any files.
-@code{gnus-article-decode-encoded-words} is one likely function to add
-to this hook.
+You tell Gnus how to fetch mail by setting @code{mail-sources}
+(@pxref{Fetching Mail}) to a @dfn{mail source specifier}.
-@vindex nnmail-pre-get-new-mail-hook
-@vindex nnmail-post-get-new-mail-hook
-@item nnmail-pre-get-new-mail-hook
-@itemx nnmail-post-get-new-mail-hook
-These are two useful hooks executed when treating new incoming
-mail---@code{nnmail-pre-get-new-mail-hook} (is called just before
-starting to handle the new mail) and
-@code{nnmail-post-get-new-mail-hook} (is called when the mail handling
-is done). Here's and example of using these two hooks to change the
-default file modes the new mail files get:
+Here's an example:
@lisp
-(add-hook 'gnus-pre-get-new-mail-hook
- (lambda () (set-default-file-modes 511)))
-
-(add-hook 'gnus-post-get-new-mail-hook
- (lambda () (set-default-file-modes 551)))
+(pop :server "pop3.mailserver.com" :user "myname")
@end lisp
-@item nnmail-tmp-directory
-@vindex nnmail-tmp-directory
-This variable says where to move incoming mail to -- while processing
-it. This is usually done in the same directory that the mail backend
-inhabits (e.g., @file{~/Mail/}), but if this variable is non-@code{nil},
-it will be used instead.
-
-@item nnmail-movemail-program
-@vindex nnmail-movemail-program
-This program is executed to move mail from the user's inbox to her home
-directory. The default is @samp{movemail}.
-
-This can also be a function. In that case, the function will be called
-with two parameters -- the name of the inbox, and the file to be moved
-to.
-
-@item nnmail-delete-incoming
-@vindex nnmail-delete-incoming
-@cindex incoming mail files
-@cindex deleting incoming files
-If non-@code{nil}, the mail backends will delete the temporary incoming
-file after splitting mail into the proper groups. This is @code{t} by
-default.
-
-@c This is @code{nil} by
-@c default for reasons of security.
+As can be observed, a mail source specifier is a list where the first
+element is a @dfn{mail source type}, followed by an arbitrary number of
+@dfn{keywords}. Keywords that are not explicitly specified are given
+default values.
-@c Since Red Gnus is an alpha release, it is to be expected to lose mail.
-(No Gnus release since (ding) Gnus 0.10 (or something like that) have
-lost mail, I think, but that's not the point. (Except certain versions
-of Red Gnus.)) By not deleting the Incoming* files, one can be sure not
-to lose mail -- if Gnus totally whacks out, one can always recover what
-was lost.
+The following mail source types are available:
-You may delete the @file{Incoming*} files at will.
-
-@item nnmail-use-long-file-names
-@vindex nnmail-use-long-file-names
-If non-@code{nil}, the mail backends will use long file and directory
-names. Groups like @samp{mail.misc} will end up in directories
-(assuming use of @code{nnml} backend) or files (assuming use of
-@code{nnfolder} backend) like @file{mail.misc}. If it is @code{nil},
-the same group will end up in @file{mail/misc}.
-
-@item nnmail-delete-file-function
-@vindex nnmail-delete-file-function
-@findex delete-file
-Function called to delete files. It is @code{delete-file} by default.
+@table @code
+@item file
+Get mail from a single file; typically from the mail spool.
-@item nnmail-cache-accepted-message-ids
-@vindex nnmail-cache-accepted-message-ids
-If non-@code{nil}, put the @code{Message-ID}s of articles imported into
-the backend (via @code{Gcc}, for instance) into the mail duplication
-discovery cache. The default is @code{nil}.
+Keywords:
+@table @code
+@item :path
+The file name. Defaults to the value of the @env{MAIL}
+environment variable or the value of @code{rmail-spool-directory}
+(usually something like @file{/usr/mail/spool/user-name}).
+
+@item :prescript
+@itemx :postscript
+Script run before/after fetching mail.
@end table
+An example file mail source:
-@node Fancy Mail Splitting
-@subsection Fancy Mail Splitting
-@cindex mail splitting
-@cindex fancy mail splitting
-
-@vindex nnmail-split-fancy
-@findex nnmail-split-fancy
-If the rather simple, standard method for specifying how to split mail
-doesn't allow you to do what you want, you can set
-@code{nnmail-split-methods} to @code{nnmail-split-fancy}. Then you can
-play with the @code{nnmail-split-fancy} variable.
+@lisp
+(file :path "/usr/spool/mail/user-name")
+@end lisp
-Let's look at an example value of this variable first:
+Or using the default file name:
@lisp
-;; Messages from the mailer daemon are not crossposted to any of
-;; the ordinary groups. Warnings are put in a separate group
-;; from real errors.
-(| ("from" mail (| ("subject" "warn.*" "mail.warning")
- "mail.misc"))
- ;; Non-error messages are crossposted to all relevant
- ;; groups, but we don't crosspost between the group for the
- ;; (ding) list and the group for other (ding) related mail.
- (& (| (any "ding@@ifi\\.uio\\.no" "ding.list")
- ("subject" "ding" "ding.misc"))
- ;; Other mailing lists...
- (any "procmail@@informatik\\.rwth-aachen\\.de" "procmail.list")
- (any "SmartList@@informatik\\.rwth-aachen\\.de" "SmartList.list")
- ;; People...
- (any "larsi@@ifi\\.uio\\.no" "people.Lars_Magne_Ingebrigtsen"))
- ;; Unmatched mail goes to the catch all group.
- "misc.misc")
+(file)
@end lisp
-This variable has the format of a @dfn{split}. A split is a (possibly)
-recursive structure where each split may contain other splits. Here are
-the five possible split syntaxes:
+If the mail spool file is not located on the local machine, it's best
+to use @acronym{POP} or @acronym{IMAP} or the like to fetch the mail.
+You can not use ange-ftp file names here---it has no way to lock the
+mail spool while moving the mail.
-@enumerate
+If it's impossible to set up a proper server, you can use ssh instead.
-@item
-@samp{group}: If the split is a string, that will be taken as a group
-name. Normal regexp match expansion will be done. See below for
-examples.
+@lisp
+(setq mail-sources
+ '((file :prescript "ssh host bin/getmail >%t")))
+@end lisp
-@item
-@var{(FIELD VALUE SPLIT)}: If the split is a list, the first element of
-which is a string, then store the message as specified by SPLIT, if
-header FIELD (a regexp) contains VALUE (also a regexp).
+The @samp{getmail} script would look something like the following:
-@item
-@var{(| SPLIT...)}: If the split is a list, and the first element is
-@code{|} (vertical bar), then process each SPLIT until one of them
-matches. A SPLIT is said to match if it will cause the mail message to
-be stored in one or more groups.
+@example
+#!/bin/sh
+# getmail - move mail from spool to stdout
+# flu@@iki.fi
-@item
-@var{(& SPLIT...)}: If the split is a list, and the first element is
-@code{&}, then process all SPLITs in the list.
+MOVEMAIL=/usr/lib/emacs/20.3/i386-redhat-linux/movemail
+TMP=$HOME/Mail/tmp
+rm -f $TMP; $MOVEMAIL $MAIL $TMP >/dev/null && cat $TMP
+@end example
-@item
-@code{junk}: If the split is the symbol @code{junk}, then don't save
-this message. Use with extreme caution.
+Alter this script to fit find the @samp{movemail} you want to use.
-@item
-@var{(: function arg1 arg2 ...)}: If the split is a list, and the first
-element is @code{:}, then the second element will be called as a
-function with @var{args} given as arguments. The function should return
-a SPLIT.
-@item
-@code{nil}: If the split is @code{nil}, it is ignored.
+@item directory
+@vindex nnmail-scan-directory-mail-source-once
+Get mail from several files in a directory. This is typically used
+when you have procmail split the incoming mail into several files.
+That is, there is a one-to-one correspondence between files in that
+directory and groups, so that mail from the file @file{foo.bar.spool}
+will be put in the group @code{foo.bar}. (You can change the suffix
+to be used instead of @code{.spool}.) Setting
+@code{nnmail-scan-directory-mail-source-once} to non-@code{nil} forces
+Gnus to scan the mail source only once. This is particularly useful
+if you want to scan mail groups at a specified level.
-@end enumerate
+@vindex nnmail-resplit-incoming
+There is also the variable @code{nnmail-resplit-incoming}, if you set
+that to a non-@code{nil} value, then the normal splitting process is
+applied to all the files from the directory, @ref{Splitting Mail}.
-In these splits, @var{FIELD} must match a complete field name.
-@var{VALUE} must match a complete word according to the fundamental mode
-syntax table. You can use @code{.*} in the regexps to match partial
-field names or words. In other words, all @var{VALUE}'s are wrapped in
-@samp{\<} and @samp{\>} pairs.
+Keywords:
-@vindex nnmail-split-abbrev-alist
-@var{FIELD} and @var{VALUE} can also be lisp symbols, in that case they
-are expanded as specified by the variable
-@code{nnmail-split-abbrev-alist}. This is an alist of cons cells, where
-the @code{car} of a cell contains the key, and the @code{cdr} contains the associated
+@table @code
+@item :path
+The name of the directory where the files are. There is no default
value.
-@vindex nnmail-split-fancy-syntax-table
-@code{nnmail-split-fancy-syntax-table} is the syntax table in effect
-when all this splitting is performed.
-
-If you want to have Gnus create groups dynamically based on some
-information in the headers (i.e., do @code{replace-match}-like
-substitutions in the group names), you can say things like:
-
-@example
-(any "debian-\\b\\(\\w+\\)@@lists.debian.org" "mail.debian.\\1")
-@end example
-
-If the string contains the element @samp{\&}, then the previously
-matched string will be substituted. Similarly, the elements @samp{\\1}
-up to @samp{\\9} will be substituted with the text matched by the
-groupings 1 through 9.
+@item :suffix
+Only files ending with this suffix are used. The default is
+@samp{.spool}.
+@item :predicate
+Only files that have this predicate return non-@code{nil} are returned.
+The default is @code{identity}. This is used as an additional
+filter---only files that have the right suffix @emph{and} satisfy this
+predicate are considered.
-@node Mail and Procmail
-@subsection Mail and Procmail
-@cindex procmail
+@item :prescript
+@itemx :postscript
+Script run before/after fetching mail.
-@cindex slocal
-@cindex elm
-Many people use @code{procmail} (or some other mail filter program or
-external delivery agent---@code{slocal}, @code{elm}, etc) to split
-incoming mail into groups. If you do that, you should set
-@code{nnmail-spool-file} to @code{procmail} to ensure that the mail
-backends never ever try to fetch mail by themselves.
+@end table
-If you have a combined @code{procmail}/POP/mailbox setup, you can do
-something like the following:
+An example directory mail source:
-@vindex nnmail-use-procmail
@lisp
-(setq nnmail-use-procmail t)
-(setq nnmail-spool-file
- '("/usr/spool/mail/my-name" "po:my-name"))
+(directory :path "/home/user-name/procmail-dir/"
+ :suffix ".prcml")
@end lisp
-This also means that you probably don't want to set
-@code{nnmail-split-methods} either, which has some, perhaps, unexpected
-side effects.
+@item pop
+Get mail from a @acronym{POP} server.
-When a mail backend is queried for what groups it carries, it replies
-with the contents of that variable, along with any groups it has figured
-out that it carries by other means. None of the backends, except
-@code{nnmh}, actually go out to the disk and check what groups actually
-exist. (It's not trivial to distinguish between what the user thinks is
-a basis for a newsgroup and what is just a plain old file or directory.)
+Keywords:
-This means that you have to tell Gnus (and the backends) by hand what
-groups exist.
+@table @code
+@item :server
+The name of the @acronym{POP} server. The default is taken from the
+@env{MAILHOST} environment variable.
+
+@item :port
+The port number of the @acronym{POP} server. This can be a number (eg,
+@samp{:port 1234}) or a string (eg, @samp{:port "pop3"}). If it is a
+string, it should be a service name as listed in @file{/etc/services} on
+Unix systems. The default is @samp{"pop3"}. On some systems you might
+need to specify it as @samp{"pop-3"} instead.
+
+@item :user
+The user name to give to the @acronym{POP} server. The default is the login
+name.
-Let's take the @code{nnmh} backend as an example:
+@item :password
+The password to give to the @acronym{POP} server. If not specified,
+the user is prompted.
-The folders are located in @code{nnmh-directory}, say, @file{~/Mail/}.
-There are three folders, @file{foo}, @file{bar} and @file{mail.baz}.
+@item :program
+The program to use to fetch mail from the @acronym{POP} server. This
+should be a @code{format}-like string. Here's an example:
-Go to the group buffer and type @kbd{G m}. When prompted, answer
-@samp{foo} for the name and @samp{nnmh} for the method. Repeat
-twice for the two other groups, @samp{bar} and @samp{mail.baz}. Be sure
-to include all your mail groups.
+@example
+fetchmail %u@@%s -P %p %t
+@end example
-That's it. You are now set to read your mail. An active file for this
-method will be created automatically.
+The valid format specifier characters are:
-@vindex nnmail-procmail-suffix
-@vindex nnmail-procmail-directory
-If you use @code{nnfolder} or any other backend that store more than a
-single article in each file, you should never have procmail add mails to
-the file that Gnus sees. Instead, procmail should put all incoming mail
-in @code{nnmail-procmail-directory}. To arrive at the file name to put
-the incoming mail in, append @code{nnmail-procmail-suffix} to the group
-name. The mail backends will read the mail from these files.
+@table @samp
+@item t
+The name of the file the mail is to be moved to. This must always be
+included in this string.
-@vindex nnmail-resplit-incoming
-When Gnus reads a file called @file{mail.misc.spool}, this mail will be
-put in the @code{mail.misc}, as one would expect. However, if you want
-Gnus to split the mail the normal way, you could set
-@code{nnmail-resplit-incoming} to @code{t}.
+@item s
+The name of the server.
-@vindex nnmail-keep-last-article
-If you use @code{procmail} to split things directly into an @code{nnmh}
-directory (which you shouldn't do), you should set
-@code{nnmail-keep-last-article} to non-@code{nil} to prevent Gnus from
-ever expiring the final article (i.e., the article with the highest
-article number) in a mail newsgroup. This is quite, quite important.
+@item P
+The port number of the server.
-Here's an example setup: The incoming spools are located in
-@file{~/incoming/} and have @samp{""} as suffixes (i.e., the incoming
-spool files have the same names as the equivalent groups). The
-@code{nnfolder} backend is to be used as the mail interface, and the
-@code{nnfolder} directory is @file{~/fMail/}.
+@item u
+The user name to use.
-@lisp
-(setq nnfolder-directory "~/fMail/")
-(setq nnmail-spool-file 'procmail)
-(setq nnmail-procmail-directory "~/incoming/")
-(setq gnus-secondary-select-methods '((nnfolder "")))
-(setq nnmail-procmail-suffix "")
-@end lisp
+@item p
+The password to use.
+@end table
+The values used for these specs are taken from the values you give the
+corresponding keywords.
-@node Incorporating Old Mail
-@subsection Incorporating Old Mail
+@item :prescript
+A script to be run before fetching the mail. The syntax is the same as
+the @code{:program} keyword. This can also be a function to be run.
-Most people have lots of old mail stored in various file formats. If
-you have set up Gnus to read mail using one of the spiffy Gnus mail
-backends, you'll probably wish to have that old mail incorporated into
-your mail groups.
+@item :postscript
+A script to be run after fetching the mail. The syntax is the same as
+the @code{:program} keyword. This can also be a function to be run.
-Doing so can be quite easy.
+@item :function
+The function to use to fetch mail from the @acronym{POP} server. The
+function is called with one parameter---the name of the file where the
+mail should be moved to.
-To take an example: You're reading mail using @code{nnml}
-(@pxref{Mail Spool}), and have set @code{nnmail-split-methods} to a
-satisfactory value (@pxref{Splitting Mail}). You have an old Unix mbox
-file filled with important, but old, mail. You want to move it into
-your @code{nnml} groups.
+@item :authentication
+This can be either the symbol @code{password} or the symbol @code{apop}
+and says what authentication scheme to use. The default is
+@code{password}.
-Here's how:
+@item :connection
+What stream to use for connecting to the server, this can be the symbol
+@code{ssl}, the symbol @code{tls} or others. The default is @code{nil}
+and use insecure connections. Note that for SSL/TLS, you need external
+programs and libraries:
-@enumerate
+@itemize @bullet
@item
-Go to the group buffer.
-
+@dfn{ssl:} Connect through SSL@. Requires OpenSSL (the program
+@samp{openssl}) or SSLeay (@samp{s_client}) as well as the external
+library @samp{ssl.el}.
@item
-Type `G f' and give the path to the mbox file when prompted to create an
-@code{nndoc} group from the mbox file (@pxref{Foreign Groups}).
+@dfn{starttls:} Connect via the STARTTLS extension (similar to SSL)@.
+Requires the external library @samp{starttls.el} and program
+@samp{starttls}.
+@end itemize
-@item
-Type `SPACE' to enter the newly created group.
+@item :leave
+Non-@code{nil} if mail is to be left on the server and UIDL used for
+message retrieval. The default is @code{nil}.
-@item
-Type `M P b' to process-mark all articles in this group's buffer
-(@pxref{Setting Process Marks}).
+@end table
-@item
-Type `B r' to respool all the process-marked articles, and answer
-@samp{nnml} when prompted (@pxref{Mail Group Commands}).
-@end enumerate
+If the @code{:program} and @code{:function} keywords aren't specified,
+@code{pop3-movemail} will be used.
-All the mail messages in the mbox file will now also be spread out over
-all your @code{nnml} groups. Try entering them and check whether things
-have gone without a glitch. If things look ok, you may consider
-deleting the mbox file, but I wouldn't do that unless I was absolutely
-sure that all the mail has ended up where it should be.
+Here are some examples. Fetch from the default @acronym{POP} server,
+using the default user name, and default fetcher:
-Respooling is also a handy thing to do if you're switching from one mail
-backend to another. Just respool all the mail in the old mail groups
-using the new mail backend.
+@lisp
+(pop)
+@end lisp
+Fetch from a named server with a named user and password:
-@node Expiring Mail
-@subsection Expiring Mail
-@cindex article expiry
+@lisp
+(pop :server "my.pop.server"
+ :user "user-name" :password "secret")
+@end lisp
-Traditional mail readers have a tendency to remove mail articles when
-you mark them as read, in some way. Gnus takes a fundamentally
-different approach to mail reading.
+Use @samp{movemail} to move the mail:
-Gnus basically considers mail just to be news that has been received in
-a rather peculiar manner. It does not think that it has the power to
-actually change the mail, or delete any mail messages. If you enter a
-mail group, and mark articles as ``read'', or kill them in some other
-fashion, the mail articles will still exist on the system. I repeat:
-Gnus will not delete your old, read mail. Unless you ask it to, of
-course.
+@lisp
+(pop :program "movemail po:%u %t %p")
+@end lisp
-To make Gnus get rid of your unwanted mail, you have to mark the
-articles as @dfn{expirable}. This does not mean that the articles will
-disappear right away, however. In general, a mail article will be
-deleted from your system if, 1) it is marked as expirable, AND 2) it is
-more than one week old. If you do not mark an article as expirable, it
-will remain on your system until hell freezes over. This bears
-repeating one more time, with some spurious capitalizations: IF you do
-NOT mark articles as EXPIRABLE, Gnus will NEVER delete those ARTICLES.
+@item maildir
+Get mail from a maildir. This is a type of mailbox that is supported by
+at least qmail and postfix, where each file in a special directory
+contains exactly one mail.
-@vindex gnus-auto-expirable-newsgroups
-You do not have to mark articles as expirable by hand. Groups that
-match the regular expression @code{gnus-auto-expirable-newsgroups} will
-have all articles that you read marked as expirable automatically. All
-articles marked as expirable have an @samp{E} in the first
-column in the summary buffer.
+Keywords:
-By default, if you have auto expiry switched on, Gnus will mark all the
-articles you read as expirable, no matter if they were read or unread
-before. To avoid having articles marked as read marked as expirable
-automatically, you can put something like the following in your
-@file{.gnus} file:
+@table @code
+@item :path
+The name of the directory where the mails are stored. The default is
+taken from the @env{MAILDIR} environment variable or
+@file{~/Maildir/}.
+@item :subdirs
+The subdirectories of the Maildir. The default is
+@samp{("new" "cur")}.
+
+@c If you sometimes look at your mail through a pop3 daemon before fetching
+@c them with Gnus, you may also have to fetch your mails from the
+@c @code{cur} directory inside the maildir, like in the first example
+@c below.
+
+You can also get mails from remote hosts (because maildirs don't suffer
+from locking problems).
-@vindex gnus-mark-article-hook
-@lisp
-(remove-hook 'gnus-mark-article-hook
- 'gnus-summary-mark-read-and-unread-as-read)
-(add-hook 'gnus-mark-article-hook 'gnus-summary-mark-unread-as-read)
-@end lisp
+@end table
-Note that making a group auto-expirable doesn't mean that all read
-articles are expired---only the articles marked as expirable
-will be expired. Also note that using the @kbd{d} command won't make
-groups expirable---only semi-automatic marking of articles as read will
-mark the articles as expirable in auto-expirable groups.
+Two example maildir mail sources:
-Let's say you subscribe to a couple of mailing lists, and you want the
-articles you have read to disappear after a while:
+@lisp
+(maildir :path "/home/user-name/Maildir/"
+ :subdirs ("cur" "new"))
+@end lisp
@lisp
-(setq gnus-auto-expirable-newsgroups
- "mail.nonsense-list\\|mail.nice-list")
+(maildir :path "/user@@remotehost.org:~/Maildir/"
+ :subdirs ("new"))
@end lisp
-Another way to have auto-expiry happen is to have the element
-@code{auto-expire} in the group parameters of the group.
+@item imap
+Get mail from a @acronym{IMAP} server. If you don't want to use
+@acronym{IMAP} as intended, as a network mail reading protocol (ie
+with nnimap), for some reason or other, Gnus let you treat it similar
+to a @acronym{POP} server and fetches articles from a given
+@acronym{IMAP} mailbox. @xref{IMAP}, for more information.
-If you use adaptive scoring (@pxref{Adaptive Scoring}) and
-auto-expiring, you'll have problems. Auto-expiring and adaptive scoring
-don't really mix very well.
+Note that for the Kerberos, GSSAPI, @acronym{TLS}/@acronym{SSL} and STARTTLS support you
+may need external programs and libraries, @xref{IMAP}.
-@vindex nnmail-expiry-wait
-The @code{nnmail-expiry-wait} variable supplies the default time an
-expirable article has to live. Gnus starts counting days from when the
-message @emph{arrived}, not from when it was sent. The default is seven
-days.
+Keywords:
-Gnus also supplies a function that lets you fine-tune how long articles
-are to live, based on what group they are in. Let's say you want to
-have one month expiry period in the @samp{mail.private} group, a one day
-expiry period in the @samp{mail.junk} group, and a six day expiry period
-everywhere else:
+@table @code
+@item :server
+The name of the @acronym{IMAP} server. The default is taken from the
+@env{MAILHOST} environment variable.
-@vindex nnmail-expiry-wait-function
-@lisp
-(setq nnmail-expiry-wait-function
- (lambda (group)
- (cond ((string= group "mail.private")
- 31)
- ((string= group "mail.junk")
- 1)
- ((string= group "important")
- 'never)
- (t
- 6))))
-@end lisp
+@item :port
+The port number of the @acronym{IMAP} server. The default is @samp{143}, or
+@samp{993} for @acronym{TLS}/@acronym{SSL} connections.
-The group names this function is fed are ``unadorned'' group
-names---no @samp{nnml:} prefixes and the like.
+@item :user
+The user name to give to the @acronym{IMAP} server. The default is the login
+name.
-The @code{nnmail-expiry-wait} variable and
-@code{nnmail-expiry-wait-function} function can either be a number (not
-necessarily an integer) or one of the symbols @code{immediate} or
-@code{never}.
+@item :password
+The password to give to the @acronym{IMAP} server. If not specified, the user is
+prompted.
-You can also use the @code{expiry-wait} group parameter to selectively
-change the expiry period (@pxref{Group Parameters}).
+@item :stream
+What stream to use for connecting to the server, this is one of the
+symbols in @code{imap-stream-alist}. Right now, this means
+@samp{gssapi}, @samp{kerberos4}, @samp{starttls}, @samp{tls},
+@samp{ssl}, @samp{shell} or the default @samp{network}.
-@vindex nnmail-keep-last-article
-If @code{nnmail-keep-last-article} is non-@code{nil}, Gnus will never
-expire the final article in a mail newsgroup. This is to make life
-easier for procmail users.
+@item :authentication
+Which authenticator to use for authenticating to the server, this is
+one of the symbols in @code{imap-authenticator-alist}. Right now,
+this means @samp{gssapi}, @samp{kerberos4}, @samp{digest-md5},
+@samp{cram-md5}, @samp{anonymous} or the default @samp{login}.
-@vindex gnus-total-expirable-newsgroups
-By the way: That line up there, about Gnus never expiring non-expirable
-articles, is a lie. If you put @code{total-expire} in the group
-parameters, articles will not be marked as expirable, but all read
-articles will be put through the expiry process. Use with extreme
-caution. Even more dangerous is the
-@code{gnus-total-expirable-newsgroups} variable. All groups that match
-this regexp will have all read articles put through the expiry process,
-which means that @emph{all} old mail articles in the groups in question
-will be deleted after a while. Use with extreme caution, and don't come
-crying to me when you discover that the regexp you used matched the
-wrong group and all your important mail has disappeared. Be a
-@emph{man}! Or a @emph{woman}! Whatever you feel more comfortable
-with! So there!
+@item :program
+When using the `shell' :stream, the contents of this variable is
+mapped into the @code{imap-shell-program} variable. This should be a
+@code{format}-like string (or list of strings). Here's an example:
-Most people make most of their mail groups total-expirable, though.
+@example
+ssh %s imapd
+@end example
-@vindex gnus-inhibit-user-auto-expire
-If @code{gnus-inhibit-user-auto-expire} is non-@code{nil}, user marking
-commands will not mark an article as expirable, even if the group has
-auto-expire turned on.
+The valid format specifier characters are:
+@table @samp
+@item s
+The name of the server.
-@node Washing Mail
-@subsection Washing Mail
-@cindex mail washing
-@cindex list server brain damage
-@cindex incoming mail treatment
+@item l
+User name from @code{imap-default-user}.
-Mailers and list servers are notorious for doing all sorts of really,
-really stupid things with mail. ``Hey, RFC822 doesn't explicitly
-prohibit us from adding the string @code{wE aRe ElItE!!!!!1!!} to the
-end of all lines passing through our server, so let's do that!!!!1!''
-Yes, but RFC822 wasn't designed to be read by morons. Things that were
-considered to be self-evident were not discussed. So. Here we are.
+@item p
+The port number of the server.
+@end table
-Case in point: The German version of Microsoft Exchange adds @samp{AW:
-} to the subjects of replies instead of @samp{Re: }. I could pretend to
-be shocked and dismayed by this, but I haven't got the energy. It is to
-laugh.
+The values used for these specs are taken from the values you give the
+corresponding keywords.
-Gnus provides a plethora of functions for washing articles while
-displaying them, but it might be nicer to do the filtering before
-storing the mail to disc. For that purpose, we have three hooks and
-various functions that can be put in these hooks.
+@item :mailbox
+The name of the mailbox to get mail from. The default is @samp{INBOX}
+which normally is the mailbox which receive incoming mail.
-@table @code
-@item nnmail-prepare-incoming-hook
-@vindex nnmail-prepare-incoming-hook
-This hook is called before doing anything with the mail and is meant for
-grand, sweeping gestures. It is called in a buffer that contains all
-the new, incoming mail. Functions to be used include:
+@item :predicate
+The predicate used to find articles to fetch. The default, @samp{UNSEEN
+UNDELETED}, is probably the best choice for most people, but if you
+sometimes peek in your mailbox with a @acronym{IMAP} client and mark some
+articles as read (or; SEEN) you might want to set this to @samp{1:*}.
+Then all articles in the mailbox is fetched, no matter what. For a
+complete list of predicates, see RFC 2060 section 6.4.4.
-@table @code
-@item nnheader-ms-strip-cr
-@findex nnheader-ms-strip-cr
-Remove trailing carriage returns from each line. This is default on
-Emacs running on MS machines.
+@item :fetchflag
+How to flag fetched articles on the server, the default @samp{\Deleted}
+will mark them as deleted, an alternative would be @samp{\Seen} which
+would simply mark them as read. These are the two most likely choices,
+but more flags are defined in RFC 2060 section 2.3.2.
+
+@item :dontexpunge
+If non-@code{nil}, don't remove all articles marked as deleted in the
+mailbox after finishing the fetch.
@end table
-@item nnmail-prepare-incoming-header-hook
-@vindex nnmail-prepare-incoming-header-hook
-This hook is called narrowed to each header. It can be used when
-cleaning up the headers. Functions that can be used include:
+An example @acronym{IMAP} mail source:
+
+@lisp
+(imap :server "mail.mycorp.com"
+ :stream kerberos4
+ :fetchflag "\\Seen")
+@end lisp
+
+@item webmail
+Get mail from a webmail server, such as @uref{http://www.hotmail.com/},
+@uref{http://webmail.netscape.com/}, @uref{http://www.netaddress.com/},
+@uref{http://mail.yahoo.com/}.
+
+NOTE: Webmail largely depends on cookies. A "one-line-cookie" patch is
+required for url "4.0pre.46".
+
+WARNING: Mails may be lost. NO WARRANTY.
+
+Keywords:
@table @code
-@item nnmail-remove-leading-whitespace
-@findex nnmail-remove-leading-whitespace
-Clear leading white space that ``helpful'' listservs have added to the
-headers to make them look nice. Aaah.
+@item :subtype
+The type of the webmail server. The default is @code{hotmail}. The
+alternatives are @code{netscape}, @code{netaddress}, @code{my-deja}.
-@item nnmail-remove-list-identifiers
-@findex nnmail-remove-list-identifiers
-Some list servers add an identifier---for example, @samp{(idm)}---to the
-beginning of all @code{Subject} headers. I'm sure that's nice for
-people who use stone age mail readers. This function will remove
-strings that match the @code{nnmail-list-identifiers} regexp, which can
-also be a list of regexp.
+@item :user
+The user name to give to the webmail server. The default is the login
+name.
-For instance, if you want to remove the @samp{(idm)} and the
-@samp{nagnagnag} identifiers:
+@item :password
+The password to give to the webmail server. If not specified, the user is
+prompted.
-@lisp
-(setq nnmail-list-identifiers
- '("(idm)" "nagnagnag"))
-@end lisp
+@item :dontexpunge
+If non-@code{nil}, only fetch unread articles and don't move them to
+trash folder after finishing the fetch.
-@item nnmail-remove-tabs
-@findex nnmail-remove-tabs
-Translate all @samp{TAB} characters into @samp{SPACE} characters.
+@end table
+
+An example webmail source:
+@lisp
+(webmail :subtype 'hotmail
+ :user "user-name"
+ :password "secret")
+@end lisp
@end table
-@item nnmail-prepare-incoming-message-hook
-@vindex nnmail-prepare-incoming-message-hook
-This hook is called narrowed to each message. Functions to be used
-include:
+@table @dfn
+@item Common Keywords
+Common keywords can be used in any type of mail source.
+
+Keywords:
@table @code
-@item article-de-quoted-unreadable
-@findex article-de-quoted-unreadable
-Decode Quoted Readable encoding.
+@item :plugged
+If non-@code{nil}, fetch the mail even when Gnus is unplugged. If you
+use directory source to get mail, you can specify it as in this
+example:
+
+@lisp
+(setq mail-sources
+ '((directory :path "/home/pavel/.Spool/"
+ :suffix ""
+ :plugged t)))
+@end lisp
+
+Gnus will then fetch your mail even when you are unplugged. This is
+useful when you use local mail and news.
@end table
@end table
+@subsubsection Function Interface
-@node Duplicates
-@subsection Duplicates
+Some of the above keywords specify a Lisp function to be executed.
+For each keyword @code{:foo}, the Lisp variable @code{foo} is bound to
+the value of the keyword while the function is executing. For example,
+consider the following mail-source setting:
-@vindex nnmail-treat-duplicates
-@vindex nnmail-message-id-cache-length
-@vindex nnmail-message-id-cache-file
-@cindex duplicate mails
-If you are a member of a couple of mailing lists, you will sometimes
-receive two copies of the same mail. This can be quite annoying, so
-@code{nnmail} checks for and treats any duplicates it might find. To do
-this, it keeps a cache of old @code{Message-ID}s---
-@code{nnmail-message-id-cache-file}, which is @file{~/.nnmail-cache} by
-default. The approximate maximum number of @code{Message-ID}s stored
-there is controlled by the @code{nnmail-message-id-cache-length}
-variable, which is 1000 by default. (So 1000 @code{Message-ID}s will be
-stored.) If all this sounds scary to you, you can set
-@code{nnmail-treat-duplicates} to @code{warn} (which is what it is by
-default), and @code{nnmail} won't delete duplicate mails. Instead it
-will insert a warning into the head of the mail saying that it thinks
-that this is a duplicate of a different message.
+@lisp
+(setq mail-sources '((pop :user "jrl"
+ :server "pophost" :function fetchfunc)))
+@end lisp
-This variable can also be a function. If that's the case, the function
-will be called from a buffer narrowed to the message in question with
-the @code{Message-ID} as a parameter. The function must return either
-@code{nil}, @code{warn}, or @code{delete}.
+While the function @code{fetchfunc} is executing, the symbol @code{user}
+is bound to @code{"jrl"}, and the symbol @code{server} is bound to
+@code{"pophost"}. The symbols @code{port}, @code{password},
+@code{program}, @code{prescript}, @code{postscript}, @code{function},
+and @code{authentication} are also bound (to their default values).
-You can turn this feature off completely by setting the variable to
+See above for a list of keywords for each type of mail source.
+
+
+@node Mail Source Customization
+@subsubsection Mail Source Customization
+
+The following is a list of variables that influence how the mail is
+fetched. You would normally not need to set or change any of these
+variables.
+
+@table @code
+@item mail-source-crash-box
+@vindex mail-source-crash-box
+File where mail will be stored while processing it. The default is@*
+@file{~/.emacs-mail-crash-box}.
+
+@item mail-source-delete-incoming
+@vindex mail-source-delete-incoming
+If non-@code{nil}, delete incoming files after handling them. If
+@code{t}, delete the files immediately, if @code{nil}, never delete any
+files. If a positive number, delete files older than number of days
+(This will only happen, when receiving new mail). You may also set
+@code{mail-source-delete-incoming} to @code{nil} and call
+@code{mail-source-delete-old-incoming} from a hook or interactively.
+
+@item mail-source-delete-old-incoming-confirm
+@vindex mail-source-delete-old-incoming-confirm
+If non-@code{nil}, ask for for confirmation before deleting old incoming
+files. This variable only applies when
+@code{mail-source-delete-incoming} is a positive number.
+
+@item mail-source-ignore-errors
+@vindex mail-source-ignore-errors
+If non-@code{nil}, ignore errors when reading mail from a mail source.
+
+@item mail-source-directory
+@vindex mail-source-directory
+Directory where files (if any) will be stored. The default is
+@file{~/Mail/}. At present, the only thing this is used for is to say
+where the incoming files will be stored if the previous variable is
@code{nil}.
-If you want all the duplicate mails to be put into a special
-@dfn{duplicates} group, you could do that using the normal mail split
-methods:
+@item mail-source-incoming-file-prefix
+@vindex mail-source-incoming-file-prefix
+Prefix for file name for storing incoming mail. The default is
+@file{Incoming}, in which case files will end up with names like
+@file{Incoming30630D_} or @file{Incoming298602ZD}. This is really only
+relevant if @code{mail-source-delete-incoming} is @code{nil}.
-@lisp
-(setq nnmail-split-fancy
- '(| ;; Messages duplicates go to a separate group.
- ("gnus-warning" "duplication of message" "duplicate")
- ;; Message from daemons, postmaster, and the like to another.
- (any mail "mail.misc")
- ;; Other rules.
- [ ... ] ))
-@end lisp
+@item mail-source-default-file-modes
+@vindex mail-source-default-file-modes
+All new mail files will get this file mode. The default is 384.
-Or something like:
-@lisp
-(setq nnmail-split-methods
- '(("duplicates" "^Gnus-Warning:")
- ;; Other rules.
- [...]))
-@end lisp
+@item mail-source-movemail-program
+@vindex mail-source-movemail-program
+If non-@code{nil}, name of program for fetching new mail. If
+@code{nil}, @code{movemail} in @var{exec-directory}.
-Here's a neat feature: If you know that the recipient reads her mail
-with Gnus, and that she has @code{nnmail-treat-duplicates} set to
-@code{delete}, you can send her as many insults as you like, just by
-using a @code{Message-ID} of a mail that you know that she's already
-received. Think of all the fun! She'll never see any of it! Whee!
+@end table
-@node Not Reading Mail
-@subsection Not Reading Mail
+@node Fetching Mail
+@subsubsection Fetching Mail
-If you start using any of the mail backends, they have the annoying
-habit of assuming that you want to read mail with them. This might not
-be unreasonable, but it might not be what you want.
+@vindex mail-sources
+@vindex nnmail-spool-file
+The way to actually tell Gnus where to get new mail from is to set
+@code{mail-sources} to a list of mail source specifiers
+(@pxref{Mail Source Specifiers}).
-If you set @code{nnmail-spool-file} to @code{nil}, none of the backends
-will ever attempt to read incoming mail, which should help.
+If this variable (and the obsolescent @code{nnmail-spool-file}) is
+@code{nil}, the mail back ends will never attempt to fetch mail by
+themselves.
-@vindex nnbabyl-get-new-mail
-@vindex nnmbox-get-new-mail
-@vindex nnml-get-new-mail
-@vindex nnmh-get-new-mail
-@vindex nnfolder-get-new-mail
-This might be too much, if, for instance, you are reading mail quite
-happily with @code{nnml} and just want to peek at some old @sc{rmail}
-file you have stashed away with @code{nnbabyl}. All backends have
-variables called backend-@code{get-new-mail}. If you want to disable
-the @code{nnbabyl} mail reading, you edit the virtual server for the
-group to have a setting where @code{nnbabyl-get-new-mail} to @code{nil}.
+If you want to fetch mail both from your local spool as well as a
+@acronym{POP} mail server, you'd say something like:
-All the mail backends will call @code{nn}*@code{-prepare-save-mail-hook}
-narrowed to the article to be saved before saving it when reading
-incoming mail.
+@lisp
+(setq mail-sources
+ '((file)
+ (pop :server "pop3.mail.server"
+ :password "secret")))
+@end lisp
+Or, if you don't want to use any of the keyword defaults:
-@node Choosing a Mail Backend
-@subsection Choosing a Mail Backend
+@lisp
+(setq mail-sources
+ '((file :path "/var/spool/mail/user-name")
+ (pop :server "pop3.mail.server"
+ :user "user-name"
+ :port "pop3"
+ :password "secret")))
+@end lisp
-Gnus will read the mail spool when you activate a mail group. The mail
-file is first copied to your home directory. What happens after that
-depends on what format you want to store your mail in.
-@menu
-* Unix Mail Box:: Using the (quite) standard Un*x mbox.
-* Rmail Babyl:: Emacs programs use the rmail babyl format.
-* Mail Spool:: Store your mail in a private spool?
-* MH Spool:: An mhspool-like backend.
-* Mail Folders:: Having one file for each group.
-@end menu
+When you use a mail back end, Gnus will slurp all your mail from your
+inbox and plonk it down in your home directory. Gnus doesn't move any
+mail if you're not using a mail back end---you have to do a lot of magic
+invocations first. At the time when you have finished drawing the
+pentagram, lightened the candles, and sacrificed the goat, you really
+shouldn't be too surprised when Gnus moves your mail.
-@node Unix Mail Box
-@subsubsection Unix Mail Box
-@cindex nnmbox
-@cindex unix mail box
-@vindex nnmbox-active-file
-@vindex nnmbox-mbox-file
-The @dfn{nnmbox} backend will use the standard Un*x mbox file to store
-mail. @code{nnmbox} will add extra headers to each mail article to say
-which group it belongs in.
+@node Mail Back End Variables
+@subsection Mail Back End Variables
-Virtual server settings:
+These variables are (for the most part) pertinent to all the various
+mail back ends.
@table @code
-@item nnmbox-mbox-file
-@vindex nnmbox-mbox-file
-The name of the mail box in the user's home directory.
+@vindex nnmail-read-incoming-hook
+@item nnmail-read-incoming-hook
+The mail back ends all call this hook after reading new mail. You can
+use this hook to notify any mail watch programs, if you want to.
-@item nnmbox-active-file
-@vindex nnmbox-active-file
-The name of the active file for the mail box.
+@vindex nnmail-split-hook
+@item nnmail-split-hook
+@findex gnus-article-decode-encoded-words
+@cindex RFC 1522 decoding
+@cindex RFC 2047 decoding
+Hook run in the buffer where the mail headers of each message is kept
+just before the splitting based on these headers is done. The hook is
+free to modify the buffer contents in any way it sees fit---the buffer
+is discarded after the splitting has been done, and no changes performed
+in the buffer will show up in any files.
+@code{gnus-article-decode-encoded-words} is one likely function to add
+to this hook.
-@item nnmbox-get-new-mail
-@vindex nnmbox-get-new-mail
-If non-@code{nil}, @code{nnmbox} will read incoming mail and split it
-into groups.
-@end table
+@vindex nnmail-pre-get-new-mail-hook
+@vindex nnmail-post-get-new-mail-hook
+@item nnmail-pre-get-new-mail-hook
+@itemx nnmail-post-get-new-mail-hook
+These are two useful hooks executed when treating new incoming
+mail---@code{nnmail-pre-get-new-mail-hook} (is called just before
+starting to handle the new mail) and
+@code{nnmail-post-get-new-mail-hook} (is called when the mail handling
+is done). Here's and example of using these two hooks to change the
+default file modes the new mail files get:
+@lisp
+(add-hook 'nnmail-pre-get-new-mail-hook
+ (lambda () (set-default-file-modes 511)))
-@node Rmail Babyl
-@subsubsection Rmail Babyl
-@cindex nnbabyl
-@cindex rmail mbox
+(add-hook 'nnmail-post-get-new-mail-hook
+ (lambda () (set-default-file-modes 551)))
+@end lisp
-@vindex nnbabyl-active-file
-@vindex nnbabyl-mbox-file
-The @dfn{nnbabyl} backend will use a babyl mail box (aka. @dfn{rmail
-mbox}) to store mail. @code{nnbabyl} will add extra headers to each mail
-article to say which group it belongs in.
+@item nnmail-use-long-file-names
+@vindex nnmail-use-long-file-names
+If non-@code{nil}, the mail back ends will use long file and directory
+names. Groups like @samp{mail.misc} will end up in directories
+(assuming use of @code{nnml} back end) or files (assuming use of
+@code{nnfolder} back end) like @file{mail.misc}. If it is @code{nil},
+the same group will end up in @file{mail/misc}.
-Virtual server settings:
+@item nnmail-delete-file-function
+@vindex nnmail-delete-file-function
+@findex delete-file
+Function called to delete files. It is @code{delete-file} by default.
-@table @code
-@item nnbabyl-mbox-file
-@vindex nnbabyl-mbox-file
-The name of the rmail mbox file.
+@item nnmail-cache-accepted-message-ids
+@vindex nnmail-cache-accepted-message-ids
+If non-@code{nil}, put the @code{Message-ID}s of articles imported into
+the back end (via @code{Gcc}, for instance) into the mail duplication
+discovery cache. The default is @code{nil}.
-@item nnbabyl-active-file
-@vindex nnbabyl-active-file
-The name of the active file for the rmail box.
+@item nnmail-cache-ignore-groups
+@vindex nnmail-cache-ignore-groups
+This can be a regular expression or a list of regular expressions.
+Group names that match any of the regular expressions will never be
+recorded in the @code{Message-ID} cache.
+
+This can be useful, for example, when using Fancy Splitting
+(@pxref{Fancy Mail Splitting}) together with the function
+@code{nnmail-split-fancy-with-parent}.
-@item nnbabyl-get-new-mail
-@vindex nnbabyl-get-new-mail
-If non-@code{nil}, @code{nnbabyl} will read incoming mail.
@end table
-@node Mail Spool
-@subsubsection Mail Spool
-@cindex nnml
-@cindex mail @sc{nov} spool
+@node Fancy Mail Splitting
+@subsection Fancy Mail Splitting
+@cindex mail splitting
+@cindex fancy mail splitting
-The @dfn{nnml} spool mail format isn't compatible with any other known
-format. It should be used with some caution.
+@vindex nnmail-split-fancy
+@findex nnmail-split-fancy
+If the rather simple, standard method for specifying how to split mail
+doesn't allow you to do what you want, you can set
+@code{nnmail-split-methods} to @code{nnmail-split-fancy}. Then you can
+play with the @code{nnmail-split-fancy} variable.
-@vindex nnml-directory
-If you use this backend, Gnus will split all incoming mail into files,
-one file for each mail, and put the articles into the corresponding
-directories under the directory specified by the @code{nnml-directory}
-variable. The default value is @file{~/Mail/}.
+Let's look at an example value of this variable first:
-You do not have to create any directories beforehand; Gnus will take
-care of all that.
+@lisp
+;; @r{Messages from the mailer daemon are not crossposted to any of}
+;; @r{the ordinary groups. Warnings are put in a separate group}
+;; @r{from real errors.}
+(| ("from" mail (| ("subject" "warn.*" "mail.warning")
+ "mail.misc"))
+ ;; @r{Non-error messages are crossposted to all relevant}
+ ;; @r{groups, but we don't crosspost between the group for the}
+ ;; @r{(ding) list and the group for other (ding) related mail.}
+ (& (| (any "ding@@ifi\\.uio\\.no" "ding.list")
+ ("subject" "ding" "ding.misc"))
+ ;; @r{Other mailing lists@dots{}}
+ (any "procmail@@informatik\\.rwth-aachen\\.de" "procmail.list")
+ (any "SmartList@@informatik\\.rwth-aachen\\.de" "SmartList.list")
+ ;; @r{Both lists below have the same suffix, so prevent}
+ ;; @r{cross-posting to mkpkg.list of messages posted only to}
+ ;; @r{the bugs- list, but allow cross-posting when the}
+ ;; @r{message was really cross-posted.}
+ (any "bugs-mypackage@@somewhere" "mypkg.bugs")
+ (any "mypackage@@somewhere\" - "bugs-mypackage" "mypkg.list")
+ ;; @r{People@dots{}}
+ (any "larsi@@ifi\\.uio\\.no" "people.Lars_Magne_Ingebrigtsen"))
+ ;; @r{Unmatched mail goes to the catch all group.}
+ "misc.misc")
+@end lisp
-If you have a strict limit as to how many files you are allowed to store
-in your account, you should not use this backend. As each mail gets its
-own file, you might very well occupy thousands of inodes within a few
-weeks. If this is no problem for you, and it isn't a problem for you
-having your friendly systems administrator walking around, madly,
-shouting ``Who is eating all my inodes?! Who? Who!?!'', then you should
-know that this is probably the fastest format to use. You do not have
-to trudge through a big mbox file just to read your new mail.
+This variable has the format of a @dfn{split}. A split is a
+(possibly) recursive structure where each split may contain other
+splits. Here are the possible split syntaxes:
-@code{nnml} is probably the slowest backend when it comes to article
-splitting. It has to create lots of files, and it also generates
-@sc{nov} databases for the incoming mails. This makes it the fastest
-backend when it comes to reading mail.
+@table @code
-Virtual server settings:
+@item group
+If the split is a string, that will be taken as a group name. Normal
+regexp match expansion will be done. See below for examples.
+
+@item (@var{field} @var{value} [- @var{restrict} [@dots{}] ] @var{split})
+If the split is a list, the first element of which is a string, then
+store the message as specified by @var{split}, if header @var{field}
+(a regexp) contains @var{value} (also a regexp). If @var{restrict}
+(yet another regexp) matches some string after @var{field} and before
+the end of the matched @var{value}, the @var{split} is ignored. If
+none of the @var{restrict} clauses match, @var{split} is processed.
+
+@item (| @var{split} @dots{})
+If the split is a list, and the first element is @code{|} (vertical
+bar), then process each @var{split} until one of them matches. A
+@var{split} is said to match if it will cause the mail message to be
+stored in one or more groups.
+
+@item (& @var{split} @dots{})
+If the split is a list, and the first element is @code{&}, then
+process all @var{split}s in the list.
+
+@item junk
+If the split is the symbol @code{junk}, then don't save (i.e., delete)
+this message. Use with extreme caution.
+
+@item (: @var{function} @var{arg1} @var{arg2} @dots{})
+If the split is a list, and the first element is @samp{:}, then the
+second element will be called as a function with @var{args} given as
+arguments. The function should return a @var{split}.
+
+@cindex body split
+For instance, the following function could be used to split based on the
+body of the messages:
-@table @code
-@item nnml-directory
-@vindex nnml-directory
-All @code{nnml} directories will be placed under this directory.
+@lisp
+(defun split-on-body ()
+ (save-excursion
+ (save-restriction
+ (widen)
+ (goto-char (point-min))
+ (when (re-search-forward "Some.*string" nil t)
+ "string.group"))))
+@end lisp
-@item nnml-active-file
-@vindex nnml-active-file
-The active file for the @code{nnml} server.
+The buffer is narrowed to the message in question when @var{function}
+is run. That's why @code{(widen)} needs to be called after
+@code{save-excursion} and @code{save-restriction} in the example
+above. Also note that with the nnimap backend, message bodies will
+not be downloaded by default. You need to set
+@code{nnimap-split-download-body} to @code{t} to do that
+(@pxref{Splitting in IMAP}).
-@item nnml-newsgroups-file
-@vindex nnml-newsgroups-file
-The @code{nnml} group descriptions file. @xref{Newsgroups File
-Format}.
+@item (! @var{func} @var{split})
+If the split is a list, and the first element is @code{!}, then
+@var{split} will be processed, and @var{func} will be called as a
+function with the result of @var{split} as argument. @var{func}
+should return a split.
-@item nnml-get-new-mail
-@vindex nnml-get-new-mail
-If non-@code{nil}, @code{nnml} will read incoming mail.
+@item nil
+If the split is @code{nil}, it is ignored.
-@item nnml-nov-is-evil
-@vindex nnml-nov-is-evil
-If non-@code{nil}, this backend will ignore any @sc{nov} files.
+@end table
-@item nnml-nov-file-name
-@vindex nnml-nov-file-name
-The name of the @sc{nov} files. The default is @file{.overview}.
+In these splits, @var{field} must match a complete field name.
+@var{value} must match a complete word according to the fundamental mode
+syntax table. You can use @code{.*} in the regexps to match partial
+field names or words. In other words, all @var{value}'s are wrapped in
+@samp{\<} and @samp{\>} pairs.
-@item nnml-prepare-save-mail-hook
-@vindex nnml-prepare-save-mail-hook
-Hook run narrowed to an article before saving.
+@vindex nnmail-split-abbrev-alist
+@var{field} and @var{value} can also be Lisp symbols, in that case
+they are expanded as specified by the variable
+@code{nnmail-split-abbrev-alist}. This is an alist of cons cells,
+where the @sc{car} of a cell contains the key, and the @sc{cdr}
+contains the associated value. Predefined entries in
+@code{nnmail-split-abbrev-alist} include:
+@table @code
+@item from
+Matches the @samp{From}, @samp{Sender} and @samp{Resent-From} fields.
+@item to
+Matches the @samp{To}, @samp{Cc}, @samp{Apparently-To},
+@samp{Resent-To} and @samp{Resent-Cc} fields.
+@item any
+Is the union of the @code{from} and @code{to} entries.
@end table
-@findex nnml-generate-nov-databases
-If your @code{nnml} groups and @sc{nov} files get totally out of whack,
-you can do a complete update by typing @kbd{M-x
-nnml-generate-nov-databases}. This command will trawl through the
-entire @code{nnml} hierarchy, looking at each and every article, so it
-might take a while to complete. A better interface to this
-functionality can be found in the server buffer (@pxref{Server
-Commands}).
+@vindex nnmail-split-fancy-syntax-table
+@code{nnmail-split-fancy-syntax-table} is the syntax table in effect
+when all this splitting is performed.
+If you want to have Gnus create groups dynamically based on some
+information in the headers (i.e., do @code{replace-match}-like
+substitutions in the group names), you can say things like:
-@node MH Spool
-@subsubsection MH Spool
-@cindex nnmh
-@cindex mh-e mail spool
+@example
+(any "debian-\\b\\(\\w+\\)@@lists.debian.org" "mail.debian.\\1")
+@end example
-@code{nnmh} is just like @code{nnml}, except that is doesn't generate
-@sc{nov} databases and it doesn't keep an active file. This makes
-@code{nnmh} a @emph{much} slower backend than @code{nnml}, but it also
-makes it easier to write procmail scripts for.
+In this example, messages sent to @samp{debian-foo@@lists.debian.org}
+will be filed in @samp{mail.debian.foo}.
-Virtual server settings:
+If the string contains the element @samp{\&}, then the previously
+matched string will be substituted. Similarly, the elements @samp{\\1}
+up to @samp{\\9} will be substituted with the text matched by the
+groupings 1 through 9.
-@table @code
-@item nnmh-directory
-@vindex nnmh-directory
-All @code{nnmh} directories will be located under this directory.
+@vindex nnmail-split-fancy-match-partial-words
+@code{nnmail-split-fancy-match-partial-words} controls whether partial
+words are matched during fancy splitting.
-@item nnmh-get-new-mail
-@vindex nnmh-get-new-mail
-If non-@code{nil}, @code{nnmh} will read incoming mail.
+Normally, regular expressions given in @code{nnmail-split-fancy} are
+implicitly surrounded by @code{\<...\>} markers, which are word
+delimiters. If this variable is true, they are not implicitly
+surrounded by anything.
-@item nnmh-be-safe
-@vindex nnmh-be-safe
-If non-@code{nil}, @code{nnmh} will go to ridiculous lengths to make
-sure that the articles in the folder are actually what Gnus thinks they
-are. It will check date stamps and stat everything in sight, so
-setting this to @code{t} will mean a serious slow-down. If you never
-use anything but Gnus to read the @code{nnmh} articles, you do not have
-to set this variable to @code{t}.
-@end table
+@example
+(any "joe" "joemail")
+@end example
+In this example, messages sent from @samp{joedavis@@foo.org} will
+normally not be filed in @samp{joemail}. With
+@code{nnmail-split-fancy-match-partial-words} set to t, however, the
+match will happen. In effect, the requirement of a word boundary is
+removed and instead the match becomes more like a grep.
+
+@findex nnmail-split-fancy-with-parent
+@code{nnmail-split-fancy-with-parent} is a function which allows you to
+split followups into the same groups their parents are in. Sometimes
+you can't make splitting rules for all your mail. For example, your
+boss might send you personal mail regarding different projects you are
+working on, and as you can't tell your boss to put a distinguishing
+string into the subject line, you have to resort to manually moving the
+messages into the right group. With this function, you only have to do
+it once per thread.
+
+To use this feature, you have to set @code{nnmail-treat-duplicates}
+and @code{nnmail-cache-accepted-message-ids} to a non-@code{nil}
+value. And then you can include @code{nnmail-split-fancy-with-parent}
+using the colon feature, like so:
+@lisp
+(setq nnmail-treat-duplicates 'warn ; @r{or @code{delete}}
+ nnmail-cache-accepted-message-ids t
+ nnmail-split-fancy
+ '(| (: nnmail-split-fancy-with-parent)
+ ;; @r{other splits go here}
+ ))
+@end lisp
-@node Mail Folders
-@subsubsection Mail Folders
-@cindex nnfolder
-@cindex mbox folders
-@cindex mail folders
+This feature works as follows: when @code{nnmail-treat-duplicates} is
+non-@code{nil}, Gnus records the message id of every message it sees
+in the file specified by the variable
+@code{nnmail-message-id-cache-file}, together with the group it is in
+(the group is omitted for non-mail messages). When mail splitting is
+invoked, the function @code{nnmail-split-fancy-with-parent} then looks
+at the References (and In-Reply-To) header of each message to split
+and searches the file specified by @code{nnmail-message-id-cache-file}
+for the message ids. When it has found a parent, it returns the
+corresponding group name unless the group name matches the regexp
+@code{nnmail-split-fancy-with-parent-ignore-groups}. It is
+recommended that you set @code{nnmail-message-id-cache-length} to a
+somewhat higher number than the default so that the message ids are
+still in the cache. (A value of 5000 appears to create a file some
+300 kBytes in size.)
+@vindex nnmail-cache-accepted-message-ids
+When @code{nnmail-cache-accepted-message-ids} is non-@code{nil}, Gnus
+also records the message ids of moved articles, so that the followup
+messages goes into the new group.
-@code{nnfolder} is a backend for storing each mail group in a separate
-file. Each file is in the standard Un*x mbox format. @code{nnfolder}
-will add extra headers to keep track of article numbers and arrival
-dates.
+Also see the variable @code{nnmail-cache-ignore-groups} if you don't
+want certain groups to be recorded in the cache. For example, if all
+outgoing messages are written to an ``outgoing'' group, you could set
+@code{nnmail-cache-ignore-groups} to match that group name.
+Otherwise, answers to all your messages would end up in the
+``outgoing'' group.
-Virtual server settings:
-@table @code
-@item nnfolder-directory
-@vindex nnfolder-directory
-All the @code{nnfolder} mail boxes will be stored under this directory.
+@node Group Mail Splitting
+@subsection Group Mail Splitting
+@cindex mail splitting
+@cindex group mail splitting
+
+@findex gnus-group-split
+If you subscribe to dozens of mailing lists but you don't want to
+maintain mail splitting rules manually, group mail splitting is for you.
+You just have to set @code{to-list} and/or @code{to-address} in group
+parameters or group customization and set @code{nnmail-split-methods} to
+@code{gnus-group-split}. This splitting function will scan all groups
+for those parameters and split mail accordingly, i.e., messages posted
+from or to the addresses specified in the parameters @code{to-list} or
+@code{to-address} of a mail group will be stored in that group.
+
+Sometimes, mailing lists have multiple addresses, and you may want mail
+splitting to recognize them all: just set the @code{extra-aliases} group
+parameter to the list of additional addresses and it's done. If you'd
+rather use a regular expression, set @code{split-regexp}.
+
+All these parameters in a group will be used to create an
+@code{nnmail-split-fancy} split, in which the @var{field} is @samp{any},
+the @var{value} is a single regular expression that matches
+@code{to-list}, @code{to-address}, all of @code{extra-aliases} and all
+matches of @code{split-regexp}, and the @var{split} is the name of the
+group. @var{restrict}s are also supported: just set the
+@code{split-exclude} parameter to a list of regular expressions.
+
+If you can't get the right split to be generated using all these
+parameters, or you just need something fancier, you can set the
+parameter @code{split-spec} to an @code{nnmail-split-fancy} split. In
+this case, all other aforementioned parameters will be ignored by
+@code{gnus-group-split}. In particular, @code{split-spec} may be set to
+@code{nil}, in which case the group will be ignored by
+@code{gnus-group-split}.
+
+@vindex gnus-group-split-default-catch-all-group
+@code{gnus-group-split} will do cross-posting on all groups that match,
+by defining a single @code{&} fancy split containing one split for each
+group. If a message doesn't match any split, it will be stored in the
+group named in @code{gnus-group-split-default-catch-all-group}, unless
+some group has @code{split-spec} set to @code{catch-all}, in which case
+that group is used as the catch-all group. Even though this variable is
+often used just to name a group, it may also be set to an arbitrarily
+complex fancy split (after all, a group name is a fancy split), and this
+may be useful to split mail that doesn't go to any mailing list to
+personal mail folders. Note that this fancy split is added as the last
+element of a @code{|} split list that also contains a @code{&} split
+with the rules extracted from group parameters.
+
+It's time for an example. Assume the following group parameters have
+been defined:
-@item nnfolder-active-file
-@vindex nnfolder-active-file
-The name of the active file.
+@example
+nnml:mail.bar:
+((to-address . "bar@@femail.com")
+ (split-regexp . ".*@@femail\\.com"))
+nnml:mail.foo:
+((to-list . "foo@@nowhere.gov")
+ (extra-aliases "foo@@localhost" "foo-redist@@home")
+ (split-exclude "bugs-foo" "rambling-foo")
+ (admin-address . "foo-request@@nowhere.gov"))
+nnml:mail.others:
+((split-spec . catch-all))
+@end example
-@item nnfolder-newsgroups-file
-@vindex nnfolder-newsgroups-file
-The name of the group descriptions file. @xref{Newsgroups File Format}.
+Setting @code{nnmail-split-methods} to @code{gnus-group-split} will
+behave as if @code{nnmail-split-fancy} had been selected and variable
+@code{nnmail-split-fancy} had been set as follows:
-@item nnfolder-get-new-mail
-@vindex nnfolder-get-new-mail
-If non-@code{nil}, @code{nnfolder} will read incoming mail.
+@lisp
+(| (& (any "\\(bar@@femail\\.com\\|.*@@femail\\.com\\)" "mail.bar")
+ (any "\\(foo@@nowhere\\.gov\\|foo@@localhost\\|foo-redist@@home\\)"
+ - "bugs-foo" - "rambling-foo" "mail.foo"))
+ "mail.others")
+@end lisp
-@item nnfolder-save-buffer-hook
-@vindex nnfolder-save-buffer-hook
-@cindex backup files
-Hook run before saving the folders. Note that Emacs does the normal
-backup renaming of files even with the @code{nnfolder} buffers. If you
-wish to switch this off, you could say something like the following in
-your @file{.emacs} file:
+@findex gnus-group-split-fancy
+If you'd rather not use group splitting for all your mail groups, you
+may use it for only some of them, by using @code{nnmail-split-fancy}
+splits like this:
@lisp
-(defun turn-off-backup ()
- (set (make-local-variable 'backup-inhibited) t))
-
-(add-hook 'nnfolder-save-buffer-hook 'turn-off-backup)
+(: gnus-group-split-fancy @var{groups} @var{no-crosspost} @var{catch-all})
@end lisp
-@item nnfolder-delete-mail-hook
-@vindex nnfolder-delete-mail-hook
-Hook run in a buffer narrowed to the message that is to be deleted.
-This function can be used to copy the message to somewhere else, or to
-extract some information from it before removing it.
-
-@end table
+@var{groups} may be a regular expression or a list of group names whose
+parameters will be scanned to generate the output split.
+@var{no-crosspost} can be used to disable cross-posting; in this case, a
+single @code{|} split will be output. @var{catch-all} is the fall back
+fancy split, used like @code{gnus-group-split-default-catch-all-group}.
+If @var{catch-all} is @code{nil}, or if @code{split-regexp} matches the
+empty string in any selected group, no catch-all split will be issued.
+Otherwise, if some group has @code{split-spec} set to @code{catch-all},
+this group will override the value of the @var{catch-all} argument.
+
+@findex gnus-group-split-setup
+Unfortunately, scanning all groups and their parameters can be quite
+slow, especially considering that it has to be done for every message.
+But don't despair! The function @code{gnus-group-split-setup} can be
+used to enable @code{gnus-group-split} in a much more efficient way. It
+sets @code{nnmail-split-methods} to @code{nnmail-split-fancy} and sets
+@code{nnmail-split-fancy} to the split produced by
+@code{gnus-group-split-fancy}. Thus, the group parameters are only
+scanned once, no matter how many messages are split.
+
+@findex gnus-group-split-update
+However, if you change group parameters, you'd have to update
+@code{nnmail-split-fancy} manually. You can do it by running
+@code{gnus-group-split-update}. If you'd rather have it updated
+automatically, just tell @code{gnus-group-split-setup} to do it for
+you. For example, add to your @file{~/.gnus.el}:
+@lisp
+(gnus-group-split-setup @var{auto-update} @var{catch-all})
+@end lisp
-@findex nnfolder-generate-active-file
-@kindex M-x nnfolder-generate-active-file
-If you have lots of @code{nnfolder}-like files you'd like to read with
-@code{nnfolder}, you can use the @kbd{M-x nnfolder-generate-active-file}
-command to make @code{nnfolder} aware of all likely files in
-@code{nnfolder-directory}.
+If @var{auto-update} is non-@code{nil}, @code{gnus-group-split-update}
+will be added to @code{nnmail-pre-get-new-mail-hook}, so you won't ever
+have to worry about updating @code{nnmail-split-fancy} again. If you
+don't omit @var{catch-all} (it's optional, equivalent to @code{nil}),
+@code{gnus-group-split-default-catch-all-group} will be set to its
+value.
+@vindex gnus-group-split-updated-hook
+Because you may want to change @code{nnmail-split-fancy} after it is set
+by @code{gnus-group-split-update}, this function will run
+@code{gnus-group-split-updated-hook} just before finishing.
-@node Other Sources
-@section Other Sources
+@node Incorporating Old Mail
+@subsection Incorporating Old Mail
+@cindex incorporating old mail
+@cindex import old mail
-Gnus can do more than just read news or mail. The methods described
-below allow Gnus to view directories and files as if they were
-newsgroups.
+Most people have lots of old mail stored in various file formats. If
+you have set up Gnus to read mail using one of the spiffy Gnus mail
+back ends, you'll probably wish to have that old mail incorporated into
+your mail groups.
-@menu
-* Directory Groups:: You can read a directory as if it was a newsgroup.
-* Anything Groups:: Dired? Who needs dired?
-* Document Groups:: Single files can be the basis of a group.
-* SOUP:: Reading @sc{SOUP} packets ``offline''.
-* Web Searches:: Creating groups from articles that match a string.
-* Mail-To-News Gateways:: Posting articles via mail-to-news gateways.
-@end menu
+Doing so can be quite easy.
+To take an example: You're reading mail using @code{nnml}
+(@pxref{Mail Spool}), and have set @code{nnmail-split-methods} to a
+satisfactory value (@pxref{Splitting Mail}). You have an old Unix mbox
+file filled with important, but old, mail. You want to move it into
+your @code{nnml} groups.
-@node Directory Groups
-@subsection Directory Groups
-@cindex nndir
-@cindex directory groups
+Here's how:
-If you have a directory that has lots of articles in separate files in
-it, you might treat it as a newsgroup. The files have to have numerical
-names, of course.
+@enumerate
+@item
+Go to the group buffer.
-This might be an opportune moment to mention @code{ange-ftp} (and its
-successor @code{efs}), that most wonderful of all wonderful Emacs
-packages. When I wrote @code{nndir}, I didn't think much about it---a
-backend to read directories. Big deal.
+@item
+Type @kbd{G f} and give the file name to the mbox file when prompted to create an
+@code{nndoc} group from the mbox file (@pxref{Foreign Groups}).
-@code{ange-ftp} changes that picture dramatically. For instance, if you
-enter the @code{ange-ftp} file name
-@file{/ftp.hpc.uh.edu:/pub/emacs/ding-list/} as the directory name,
-@code{ange-ftp} or @code{efs} will actually allow you to read this
-directory over at @samp{sina} as a newsgroup. Distributed news ahoy!
+@item
+Type @kbd{SPACE} to enter the newly created group.
-@code{nndir} will use @sc{nov} files if they are present.
+@item
+Type @kbd{M P b} to process-mark all articles in this group's buffer
+(@pxref{Setting Process Marks}).
-@code{nndir} is a ``read-only'' backend---you can't delete or expire
-articles with this method. You can use @code{nnmh} or @code{nnml} for
-whatever you use @code{nndir} for, so you could switch to any of those
-methods if you feel the need to have a non-read-only @code{nndir}.
+@item
+Type @kbd{B r} to respool all the process-marked articles, and answer
+@samp{nnml} when prompted (@pxref{Mail Group Commands}).
+@end enumerate
+All the mail messages in the mbox file will now also be spread out over
+all your @code{nnml} groups. Try entering them and check whether things
+have gone without a glitch. If things look ok, you may consider
+deleting the mbox file, but I wouldn't do that unless I was absolutely
+sure that all the mail has ended up where it should be.
-@node Anything Groups
-@subsection Anything Groups
-@cindex nneething
+Respooling is also a handy thing to do if you're switching from one mail
+back end to another. Just respool all the mail in the old mail groups
+using the new mail back end.
-From the @code{nndir} backend (which reads a single spool-like
-directory), it's just a hop and a skip to @code{nneething}, which
-pretends that any arbitrary directory is a newsgroup. Strange, but
-true.
-When @code{nneething} is presented with a directory, it will scan this
-directory and assign article numbers to each file. When you enter such
-a group, @code{nneething} must create ``headers'' that Gnus can use.
-After all, Gnus is a newsreader, in case you're
-forgetting. @code{nneething} does this in a two-step process. First, it
-snoops each file in question. If the file looks like an article (i.e.,
-the first few lines look like headers), it will use this as the head.
-If this is just some arbitrary file without a head (e.g. a C source
-file), @code{nneething} will cobble up a header out of thin air. It
-will use file ownership, name and date and do whatever it can with these
-elements.
+@node Expiring Mail
+@subsection Expiring Mail
+@cindex article expiry
-All this should happen automatically for you, and you will be presented
-with something that looks very much like a newsgroup. Totally like a
-newsgroup, to be precise. If you select an article, it will be displayed
-in the article buffer, just as usual.
+Traditional mail readers have a tendency to remove mail articles when
+you mark them as read, in some way. Gnus takes a fundamentally
+different approach to mail reading.
-If you select a line that represents a directory, Gnus will pop you into
-a new summary buffer for this @code{nneething} group. And so on. You can
-traverse the entire disk this way, if you feel like, but remember that
-Gnus is not dired, really, and does not intend to be, either.
+Gnus basically considers mail just to be news that has been received in
+a rather peculiar manner. It does not think that it has the power to
+actually change the mail, or delete any mail messages. If you enter a
+mail group, and mark articles as ``read'', or kill them in some other
+fashion, the mail articles will still exist on the system. I repeat:
+Gnus will not delete your old, read mail. Unless you ask it to, of
+course.
-There are two overall modes to this action---ephemeral or solid. When
-doing the ephemeral thing (i.e., @kbd{G D} from the group buffer), Gnus
-will not store information on what files you have read, and what files
-are new, and so on. If you create a solid @code{nneething} group the
-normal way with @kbd{G m}, Gnus will store a mapping table between
-article numbers and file names, and you can treat this group like any
-other groups. When you activate a solid @code{nneething} group, you will
-be told how many unread articles it contains, etc., etc.
+To make Gnus get rid of your unwanted mail, you have to mark the
+articles as @dfn{expirable}. (With the default key bindings, this means
+that you have to type @kbd{E}.) This does not mean that the articles
+will disappear right away, however. In general, a mail article will be
+deleted from your system if, 1) it is marked as expirable, AND 2) it is
+more than one week old. If you do not mark an article as expirable, it
+will remain on your system until hell freezes over. This bears
+repeating one more time, with some spurious capitalizations: IF you do
+NOT mark articles as EXPIRABLE, Gnus will NEVER delete those ARTICLES.
-Some variables:
+You do not have to mark articles as expirable by hand. Gnus provides
+two features, called ``auto-expire'' and ``total-expire'', that can help you
+with this. In a nutshell, ``auto-expire'' means that Gnus hits @kbd{E}
+for you when you select an article. And ``total-expire'' means that Gnus
+considers all articles as expirable that are read. So, in addition to
+the articles marked @samp{E}, also the articles marked @samp{r},
+@samp{R}, @samp{O}, @samp{K}, @samp{Y} and so on are considered
+expirable.
-@table @code
-@item nneething-map-file-directory
-@vindex nneething-map-file-directory
-All the mapping files for solid @code{nneething} groups will be stored
-in this directory, which defaults to @file{~/.nneething/}.
+When should either auto-expire or total-expire be used? Most people
+who are subscribed to mailing lists split each list into its own group
+and then turn on auto-expire or total-expire for those groups.
+(@xref{Splitting Mail}, for more information on splitting each list
+into its own group.)
+
+Which one is better, auto-expire or total-expire? It's not easy to
+answer. Generally speaking, auto-expire is probably faster. Another
+advantage of auto-expire is that you get more marks to work with: for
+the articles that are supposed to stick around, you can still choose
+between tick and dormant and read marks. But with total-expire, you
+only have dormant and ticked to choose from. The advantage of
+total-expire is that it works well with adaptive scoring (@pxref{Adaptive
+Scoring}). Auto-expire works with normal scoring but not with adaptive
+scoring.
-@item nneething-exclude-files
-@vindex nneething-exclude-files
-All files that match this regexp will be ignored. Nice to use to exclude
-auto-save files and the like, which is what it does by default.
+@vindex gnus-auto-expirable-newsgroups
+Groups that match the regular expression
+@code{gnus-auto-expirable-newsgroups} will have all articles that you
+read marked as expirable automatically. All articles marked as
+expirable have an @samp{E} in the first column in the summary buffer.
-@item nneething-include-files
-@vindex nneething-include-files
-Regexp saying what files to include in the group. If this variable is
-non-@code{nil}, only files matching this regexp will be included.
+By default, if you have auto expiry switched on, Gnus will mark all the
+articles you read as expirable, no matter if they were read or unread
+before. To avoid having articles marked as read marked as expirable
+automatically, you can put something like the following in your
+@file{~/.gnus.el} file:
-@item nneething-map-file
-@vindex nneething-map-file
-Name of the map files.
-@end table
+@vindex gnus-mark-article-hook
+@lisp
+(remove-hook 'gnus-mark-article-hook
+ 'gnus-summary-mark-read-and-unread-as-read)
+(add-hook 'gnus-mark-article-hook 'gnus-summary-mark-unread-as-read)
+@end lisp
+Note that making a group auto-expirable doesn't mean that all read
+articles are expired---only the articles marked as expirable
+will be expired. Also note that using the @kbd{d} command won't make
+articles expirable---only semi-automatic marking of articles as read will
+mark the articles as expirable in auto-expirable groups.
-@node Document Groups
-@subsection Document Groups
-@cindex nndoc
-@cindex documentation group
-@cindex help group
+Let's say you subscribe to a couple of mailing lists, and you want the
+articles you have read to disappear after a while:
-@code{nndoc} is a cute little thing that will let you read a single file
-as a newsgroup. Several files types are supported:
+@lisp
+(setq gnus-auto-expirable-newsgroups
+ "mail.nonsense-list\\|mail.nice-list")
+@end lisp
-@table @code
-@cindex babyl
-@cindex rmail mbox
+Another way to have auto-expiry happen is to have the element
+@code{auto-expire} in the group parameters of the group.
-@item babyl
-The babyl (rmail) mail box.
-@cindex mbox
-@cindex Unix mbox
+If you use adaptive scoring (@pxref{Adaptive Scoring}) and
+auto-expiring, you'll have problems. Auto-expiring and adaptive scoring
+don't really mix very well.
-@item mbox
-The standard Unix mbox file.
+@vindex nnmail-expiry-wait
+The @code{nnmail-expiry-wait} variable supplies the default time an
+expirable article has to live. Gnus starts counting days from when the
+message @emph{arrived}, not from when it was sent. The default is seven
+days.
-@cindex MMDF mail box
-@item mmdf
-The MMDF mail box format.
+Gnus also supplies a function that lets you fine-tune how long articles
+are to live, based on what group they are in. Let's say you want to
+have one month expiry period in the @samp{mail.private} group, a one day
+expiry period in the @samp{mail.junk} group, and a six day expiry period
+everywhere else:
-@item news
-Several news articles appended into a file.
+@vindex nnmail-expiry-wait-function
+@lisp
+(setq nnmail-expiry-wait-function
+ (lambda (group)
+ (cond ((string= group "mail.private")
+ 31)
+ ((string= group "mail.junk")
+ 1)
+ ((string= group "important")
+ 'never)
+ (t
+ 6))))
+@end lisp
-@item rnews
-@cindex rnews batch files
-The rnews batch transport format.
-@cindex forwarded messages
+The group names this function is fed are ``unadorned'' group
+names---no @samp{nnml:} prefixes and the like.
-@item forward
-Forwarded articles.
+The @code{nnmail-expiry-wait} variable and
+@code{nnmail-expiry-wait-function} function can either be a number (not
+necessarily an integer) or one of the symbols @code{immediate} or
+@code{never}.
-@item mime-parts
-MIME multipart messages, besides digests.
+You can also use the @code{expiry-wait} group parameter to selectively
+change the expiry period (@pxref{Group Parameters}).
-@item mime-digest
-@cindex digest
-@cindex MIME digest
-@cindex 1153 digest
-@cindex RFC 1153 digest
-@cindex RFC 341 digest
-MIME (RFC 1341) digest format.
+@vindex nnmail-expiry-target
+The normal action taken when expiring articles is to delete them.
+However, in some circumstances it might make more sense to move them
+to other groups instead of deleting them. The variable
+@code{nnmail-expiry-target} (and the @code{expiry-target} group
+parameter) controls this. The variable supplies a default value for
+all groups, which can be overridden for specific groups by the group
+parameter. default value is @code{delete}, but this can also be a
+string (which should be the name of the group the message should be
+moved to), or a function (which will be called in a buffer narrowed to
+the message in question, and with the name of the group being moved
+from as its parameter) which should return a target---either a group
+name or @code{delete}.
+
+Here's an example for specifying a group name:
+@lisp
+(setq nnmail-expiry-target "nnml:expired")
+@end lisp
-@item standard-digest
-The standard (RFC 1153) digest format.
+@findex nnmail-fancy-expiry-target
+@vindex nnmail-fancy-expiry-targets
+Gnus provides a function @code{nnmail-fancy-expiry-target} which will
+expire mail to groups according to the variable
+@code{nnmail-fancy-expiry-targets}. Here's an example:
-@item slack-digest
-Non-standard digest format---matches most things, but does it badly.
-@end table
+@lisp
+ (setq nnmail-expiry-target 'nnmail-fancy-expiry-target
+ nnmail-fancy-expiry-targets
+ '((to-from "boss" "nnfolder:Work")
+ ("subject" "IMPORTANT" "nnfolder:IMPORTANT.%Y.%b")
+ ("from" ".*" "nnfolder:Archive-%Y")))
+@end lisp
-You can also use the special ``file type'' @code{guess}, which means
-that @code{nndoc} will try to guess what file type it is looking at.
-@code{digest} means that @code{nndoc} should guess what digest type the
-file is.
+With this setup, any mail that has @code{IMPORTANT} in its Subject
+header and was sent in the year @code{YYYY} and month @code{MMM}, will
+get expired to the group @code{nnfolder:IMPORTANT.YYYY.MMM}. If its
+From or To header contains the string @code{boss}, it will get expired
+to @code{nnfolder:Work}. All other mail will get expired to
+@code{nnfolder:Archive-YYYY}.
-@code{nndoc} will not try to change the file or insert any extra headers into
-it---it will simply, like, let you use the file as the basis for a
-group. And that's it.
+@vindex nnmail-keep-last-article
+If @code{nnmail-keep-last-article} is non-@code{nil}, Gnus will never
+expire the final article in a mail newsgroup. This is to make life
+easier for procmail users.
-If you have some old archived articles that you want to insert into your
-new & spiffy Gnus mail backend, @code{nndoc} can probably help you with
-that. Say you have an old @file{RMAIL} file with mail that you now want
-to split into your new @code{nnml} groups. You look at that file using
-@code{nndoc} (using the @kbd{G f} command in the group buffer
-(@pxref{Foreign Groups})), set the process mark on all the articles in
-the buffer (@kbd{M P b}, for instance), and then re-spool (@kbd{B r})
-using @code{nnml}. If all goes well, all the mail in the @file{RMAIL}
-file is now also stored in lots of @code{nnml} directories, and you can
-delete that pesky @file{RMAIL} file. If you have the guts!
-
-Virtual server variables:
-
-@table @code
-@item nndoc-article-type
-@vindex nndoc-article-type
-This should be one of @code{mbox}, @code{babyl}, @code{digest},
-@code{news}, @code{rnews}, @code{mmdf}, @code{forward}, @code{rfc934},
-@code{rfc822-forward}, @code{mime-parts}, @code{mime-digest},
-@code{standard-digest}, @code{slack-digest}, @code{clari-briefs} or
-@code{guess}.
+@vindex gnus-total-expirable-newsgroups
+By the way: That line up there, about Gnus never expiring non-expirable
+articles, is a lie. If you put @code{total-expire} in the group
+parameters, articles will not be marked as expirable, but all read
+articles will be put through the expiry process. Use with extreme
+caution. Even more dangerous is the
+@code{gnus-total-expirable-newsgroups} variable. All groups that match
+this regexp will have all read articles put through the expiry process,
+which means that @emph{all} old mail articles in the groups in question
+will be deleted after a while. Use with extreme caution, and don't come
+crying to me when you discover that the regexp you used matched the
+wrong group and all your important mail has disappeared. Be a
+@emph{man}! Or a @emph{woman}! Whatever you feel more comfortable
+with! So there!
-@item nndoc-post-type
-@vindex nndoc-post-type
-This variable says whether Gnus is to consider the group a news group or
-a mail group. There are two valid values: @code{mail} (the default)
-and @code{news}.
-@end table
+Most people make most of their mail groups total-expirable, though.
-@menu
-* Document Server Internals:: How to add your own document types.
-@end menu
+@vindex gnus-inhibit-user-auto-expire
+If @code{gnus-inhibit-user-auto-expire} is non-@code{nil}, user marking
+commands will not mark an article as expirable, even if the group has
+auto-expire turned on.
-@node Document Server Internals
-@subsubsection Document Server Internals
+@node Washing Mail
+@subsection Washing Mail
+@cindex mail washing
+@cindex list server brain damage
+@cindex incoming mail treatment
-Adding new document types to be recognized by @code{nndoc} isn't
-difficult. You just have to whip up a definition of what the document
-looks like, write a predicate function to recognize that document type,
-and then hook into @code{nndoc}.
+Mailers and list servers are notorious for doing all sorts of really,
+really stupid things with mail. ``Hey, RFC 822 doesn't explicitly
+prohibit us from adding the string @code{wE aRe ElItE!!!!!1!!} to the
+end of all lines passing through our server, so let's do that!!!!1!''
+Yes, but RFC 822 wasn't designed to be read by morons. Things that were
+considered to be self-evident were not discussed. So. Here we are.
-First, here's an example document type definition:
+Case in point: The German version of Microsoft Exchange adds @samp{AW:
+} to the subjects of replies instead of @samp{Re: }. I could pretend to
+be shocked and dismayed by this, but I haven't got the energy. It is to
+laugh.
-@example
-(mmdf
- (article-begin . "^\^A\^A\^A\^A\n")
- (body-end . "^\^A\^A\^A\^A\n"))
-@end example
+Gnus provides a plethora of functions for washing articles while
+displaying them, but it might be nicer to do the filtering before
+storing the mail to disk. For that purpose, we have three hooks and
+various functions that can be put in these hooks.
-The definition is simply a unique @dfn{name} followed by a series of
-regexp pseudo-variable settings. Below are the possible
-variables---don't be daunted by the number of variables; most document
-types can be defined with very few settings:
+@table @code
+@item nnmail-prepare-incoming-hook
+@vindex nnmail-prepare-incoming-hook
+This hook is called before doing anything with the mail and is meant for
+grand, sweeping gestures. It is called in a buffer that contains all
+the new, incoming mail. Functions to be used include:
@table @code
-@item first-article
-If present, @code{nndoc} will skip past all text until it finds
-something that match this regexp. All text before this will be
-totally ignored.
+@item nnheader-ms-strip-cr
+@findex nnheader-ms-strip-cr
+Remove trailing carriage returns from each line. This is default on
+Emacs running on MS machines.
-@item article-begin
-This setting has to be present in all document type definitions. It
-says what the beginning of each article looks like.
+@end table
-@item head-begin-function
-If present, this should be a function that moves point to the head of
-the article.
+@item nnmail-prepare-incoming-header-hook
+@vindex nnmail-prepare-incoming-header-hook
+This hook is called narrowed to each header. It can be used when
+cleaning up the headers. Functions that can be used include:
-@item nndoc-head-begin
-If present, this should be a regexp that matches the head of the
-article.
+@table @code
+@item nnmail-remove-leading-whitespace
+@findex nnmail-remove-leading-whitespace
+Clear leading white space that ``helpful'' listservs have added to the
+headers to make them look nice. Aaah.
-@item nndoc-head-end
-This should match the end of the head of the article. It defaults to
-@samp{^$}---the empty line.
+(Note that this function works on both the header on the body of all
+messages, so it is a potentially dangerous function to use (if a body
+of a message contains something that looks like a header line). So
+rather than fix the bug, it is of course the right solution to make it
+into a feature by documenting it.)
-@item body-begin-function
-If present, this function should move point to the beginning of the body
-of the article.
+@item nnmail-remove-list-identifiers
+@findex nnmail-remove-list-identifiers
+Some list servers add an identifier---for example, @samp{(idm)}---to the
+beginning of all @code{Subject} headers. I'm sure that's nice for
+people who use stone age mail readers. This function will remove
+strings that match the @code{nnmail-list-identifiers} regexp, which can
+also be a list of regexp. @code{nnmail-list-identifiers} may not contain
+@code{\\(..\\)}.
-@item body-begin
-This should match the beginning of the body of the article. It defaults
-to @samp{^\n}.
+For instance, if you want to remove the @samp{(idm)} and the
+@samp{nagnagnag} identifiers:
-@item body-end-function
-If present, this function should move point to the end of the body of
-the article.
+@lisp
+(setq nnmail-list-identifiers
+ '("(idm)" "nagnagnag"))
+@end lisp
-@item body-end
-If present, this should match the end of the body of the article.
+This can also be done non-destructively with
+@code{gnus-list-identifiers}, @xref{Article Hiding}.
-@item file-end
-If present, this should match the end of the file. All text after this
-regexp will be totally ignored.
+@item nnmail-remove-tabs
+@findex nnmail-remove-tabs
+Translate all @samp{TAB} characters into @samp{SPACE} characters.
+
+@item nnmail-fix-eudora-headers
+@findex nnmail-fix-eudora-headers
+@cindex Eudora
+Eudora produces broken @code{References} headers, but OK
+@code{In-Reply-To} headers. This function will get rid of the
+@code{References} headers.
@end table
-So, using these variables @code{nndoc} is able to dissect a document
-file into a series of articles, each with a head and a body. However, a
-few more variables are needed since not all document types are all that
-news-like---variables needed to transform the head or the body into
-something that's palatable for Gnus:
+@item nnmail-prepare-incoming-message-hook
+@vindex nnmail-prepare-incoming-message-hook
+This hook is called narrowed to each message. Functions to be used
+include:
@table @code
-@item prepare-body-function
-If present, this function will be called when requesting an article. It
-will be called with point at the start of the body, and is useful if the
-document has encoded some parts of its contents.
+@item article-de-quoted-unreadable
+@findex article-de-quoted-unreadable
+Decode Quoted Readable encoding.
-@item article-transform-function
-If present, this function is called when requesting an article. It's
-meant to be used for more wide-ranging transformation of both head and
-body of the article.
+@end table
+@end table
-@item generate-head-function
-If present, this function is called to generate a head that Gnus can
-understand. It is called with the article number as a parameter, and is
-expected to generate a nice head for the article in question. It is
-called when requesting the headers of all articles.
-@end table
+@node Duplicates
+@subsection Duplicates
-Let's look at the most complicated example I can come up with---standard
-digests:
+@vindex nnmail-treat-duplicates
+@vindex nnmail-message-id-cache-length
+@vindex nnmail-message-id-cache-file
+@cindex duplicate mails
+If you are a member of a couple of mailing lists, you will sometimes
+receive two copies of the same mail. This can be quite annoying, so
+@code{nnmail} checks for and treats any duplicates it might find. To do
+this, it keeps a cache of old @code{Message-ID}s---
+@code{nnmail-message-id-cache-file}, which is @file{~/.nnmail-cache} by
+default. The approximate maximum number of @code{Message-ID}s stored
+there is controlled by the @code{nnmail-message-id-cache-length}
+variable, which is 1000 by default. (So 1000 @code{Message-ID}s will be
+stored.) If all this sounds scary to you, you can set
+@code{nnmail-treat-duplicates} to @code{warn} (which is what it is by
+default), and @code{nnmail} won't delete duplicate mails. Instead it
+will insert a warning into the head of the mail saying that it thinks
+that this is a duplicate of a different message.
-@example
-(standard-digest
- (first-article . ,(concat "^" (make-string 70 ?-) "\n\n+"))
- (article-begin . ,(concat "\n\n" (make-string 30 ?-) "\n\n+"))
- (prepare-body-function . nndoc-unquote-dashes)
- (body-end-function . nndoc-digest-body-end)
- (head-end . "^ ?$")
- (body-begin . "^ ?\n")
- (file-end . "^End of .*digest.*[0-9].*\n\\*\\*\\|^End of.*Digest *$")
- (subtype digest guess))
-@end example
+This variable can also be a function. If that's the case, the function
+will be called from a buffer narrowed to the message in question with
+the @code{Message-ID} as a parameter. The function must return either
+@code{nil}, @code{warn}, or @code{delete}.
-We see that all text before a 70-width line of dashes is ignored; all
-text after a line that starts with that @samp{^End of} is also ignored;
-each article begins with a 30-width line of dashes; the line separating
-the head from the body may contain a single space; and that the body is
-run through @code{nndoc-unquote-dashes} before being delivered.
+You can turn this feature off completely by setting the variable to
+@code{nil}.
-To hook your own document definition into @code{nndoc}, use the
-@code{nndoc-add-type} function. It takes two parameters---the first is
-the definition itself and the second (optional) parameter says where in
-the document type definition alist to put this definition. The alist is
-traversed sequentially, and @code{nndoc-TYPE-type-p} is called for a given type @code{TYPE}. So @code{nndoc-mmdf-type-p} is called to see whether a document
-is of @code{mmdf} type, and so on. These type predicates should return
-@code{nil} if the document is not of the correct type; @code{t} if it is
-of the correct type; and a number if the document might be of the
-correct type. A high number means high probability; a low number means
-low probability with @samp{0} being the lowest valid number.
+If you want all the duplicate mails to be put into a special
+@dfn{duplicates} group, you could do that using the normal mail split
+methods:
+@lisp
+(setq nnmail-split-fancy
+ '(| ;; @r{Messages duplicates go to a separate group.}
+ ("gnus-warning" "duplicat\\(e\\|ion\\) of message" "duplicate")
+ ;; @r{Message from daemons, postmaster, and the like to another.}
+ (any mail "mail.misc")
+ ;; @r{Other rules.}
+ [...] ))
+@end lisp
+@noindent
+Or something like:
+@lisp
+(setq nnmail-split-methods
+ '(("duplicates" "^Gnus-Warning:.*duplicate")
+ ;; @r{Other rules.}
+ [...]))
+@end lisp
-@node SOUP
-@subsection SOUP
-@cindex SOUP
-@cindex offline
+Here's a neat feature: If you know that the recipient reads her mail
+with Gnus, and that she has @code{nnmail-treat-duplicates} set to
+@code{delete}, you can send her as many insults as you like, just by
+using a @code{Message-ID} of a mail that you know that she's already
+received. Think of all the fun! She'll never see any of it! Whee!
-In the PC world people often talk about ``offline'' newsreaders. These
-are thingies that are combined reader/news transport monstrosities.
-With built-in modem programs. Yecchh!
-Of course, us Unix Weenie types of human beans use things like
-@code{uucp} and, like, @code{nntpd} and set up proper news and mail
-transport things like Ghod intended. And then we just use normal
-newsreaders.
+@node Not Reading Mail
+@subsection Not Reading Mail
-However, it can sometimes be convenient to do something a that's a bit
-easier on the brain if you have a very slow modem, and you're not really
-that interested in doing things properly.
+If you start using any of the mail back ends, they have the annoying
+habit of assuming that you want to read mail with them. This might not
+be unreasonable, but it might not be what you want.
-A file format called @sc{soup} has been developed for transporting news
-and mail from servers to home machines and back again. It can be a bit
-fiddly.
+If you set @code{mail-sources} and @code{nnmail-spool-file} to
+@code{nil}, none of the back ends will ever attempt to read incoming
+mail, which should help.
-First some terminology:
+@vindex nnbabyl-get-new-mail
+@vindex nnmbox-get-new-mail
+@vindex nnml-get-new-mail
+@vindex nnmh-get-new-mail
+@vindex nnfolder-get-new-mail
+This might be too much, if, for instance, you are reading mail quite
+happily with @code{nnml} and just want to peek at some old Rmail
+file you have stashed away with @code{nnbabyl}. All back ends have
+variables called back-end-@code{get-new-mail}. If you want to disable
+the @code{nnbabyl} mail reading, you edit the virtual server for the
+group to have a setting where @code{nnbabyl-get-new-mail} to @code{nil}.
-@table @dfn
+All the mail back ends will call @code{nn}*@code{-prepare-save-mail-hook}
+narrowed to the article to be saved before saving it when reading
+incoming mail.
-@item server
-This is the machine that is connected to the outside world and where you
-get news and/or mail from.
-@item home machine
-This is the machine that you want to do the actual reading and responding
-on. It is typically not connected to the rest of the world in any way.
+@node Choosing a Mail Back End
+@subsection Choosing a Mail Back End
-@item packet
-Something that contains messages and/or commands. There are two kinds
-of packets:
+Gnus will read the mail spool when you activate a mail group. The mail
+file is first copied to your home directory. What happens after that
+depends on what format you want to store your mail in.
-@table @dfn
-@item message packets
-These are packets made at the server, and typically contain lots of
-messages for you to read. These are called @file{SoupoutX.tgz} by
-default, where @var{X} is a number.
+There are six different mail back ends in the standard Gnus, and more
+back ends are available separately. The mail back end most people use
+(because it is possibly the fastest) is @code{nnml} (@pxref{Mail
+Spool}).
-@item response packets
-These are packets made at the home machine, and typically contains
-replies that you've written. These are called @file{SoupinX.tgz} by
-default, where @var{X} is a number.
+@menu
+* Unix Mail Box:: Using the (quite) standard Un*x mbox.
+* Rmail Babyl:: Emacs programs use the Rmail Babyl format.
+* Mail Spool:: Store your mail in a private spool?
+* MH Spool:: An mhspool-like back end.
+* Maildir:: Another one-file-per-message format.
+* Mail Folders:: Having one file for each group.
+* Comparing Mail Back Ends:: An in-depth looks at pros and cons.
+@end menu
-@end table
+@node Unix Mail Box
+@subsubsection Unix Mail Box
+@cindex nnmbox
+@cindex unix mail box
+
+@vindex nnmbox-active-file
+@vindex nnmbox-mbox-file
+The @dfn{nnmbox} back end will use the standard Un*x mbox file to store
+mail. @code{nnmbox} will add extra headers to each mail article to say
+which group it belongs in.
+
+Virtual server settings:
+
+@table @code
+@item nnmbox-mbox-file
+@vindex nnmbox-mbox-file
+The name of the mail box in the user's home directory. Default is
+@file{~/mbox}.
+
+@item nnmbox-active-file
+@vindex nnmbox-active-file
+The name of the active file for the mail box. Default is
+@file{~/.mbox-active}.
+
+@item nnmbox-get-new-mail
+@vindex nnmbox-get-new-mail
+If non-@code{nil}, @code{nnmbox} will read incoming mail and split it
+into groups. Default is @code{t}.
@end table
-@enumerate
+@node Rmail Babyl
+@subsubsection Rmail Babyl
+@cindex nnbabyl
+@cindex Rmail mbox
-@item
-You log in on the server and create a @sc{soup} packet. You can either
-use a dedicated @sc{soup} thingie (like the @code{awk} program), or you
-can use Gnus to create the packet with its @sc{soup} commands (@kbd{O
-s} and/or @kbd{G s b}; and then @kbd{G s p}) (@pxref{SOUP Commands}).
+@vindex nnbabyl-active-file
+@vindex nnbabyl-mbox-file
+The @dfn{nnbabyl} back end will use a Babyl mail box (aka. @dfn{Rmail
+mbox}) to store mail. @code{nnbabyl} will add extra headers to each
+mail article to say which group it belongs in.
-@item
-You transfer the packet home. Rail, boat, car or modem will do fine.
+Virtual server settings:
-@item
-You put the packet in your home directory.
+@table @code
+@item nnbabyl-mbox-file
+@vindex nnbabyl-mbox-file
+The name of the Rmail mbox file. The default is @file{~/RMAIL}
-@item
-You fire up Gnus on your home machine using the @code{nnsoup} backend as
-the native or secondary server.
+@item nnbabyl-active-file
+@vindex nnbabyl-active-file
+The name of the active file for the rmail box. The default is
+@file{~/.rmail-active}
-@item
-You read articles and mail and answer and followup to the things you
-want (@pxref{SOUP Replies}).
+@item nnbabyl-get-new-mail
+@vindex nnbabyl-get-new-mail
+If non-@code{nil}, @code{nnbabyl} will read incoming mail. Default is
+@code{t}
+@end table
-@item
-You do the @kbd{G s r} command to pack these replies into a @sc{soup}
-packet.
-@item
-You transfer this packet to the server.
+@node Mail Spool
+@subsubsection Mail Spool
+@cindex nnml
+@cindex mail @acronym{NOV} spool
-@item
-You use Gnus to mail this packet out with the @kbd{G s s} command.
+The @dfn{nnml} spool mail format isn't compatible with any other known
+format. It should be used with some caution.
-@item
-You then repeat until you die.
+@vindex nnml-directory
+If you use this back end, Gnus will split all incoming mail into files,
+one file for each mail, and put the articles into the corresponding
+directories under the directory specified by the @code{nnml-directory}
+variable. The default value is @file{~/Mail/}.
-@end enumerate
+You do not have to create any directories beforehand; Gnus will take
+care of all that.
-So you basically have a bipartite system---you use @code{nnsoup} for
-reading and Gnus for packing/sending these @sc{soup} packets.
+If you have a strict limit as to how many files you are allowed to store
+in your account, you should not use this back end. As each mail gets its
+own file, you might very well occupy thousands of inodes within a few
+weeks. If this is no problem for you, and it isn't a problem for you
+having your friendly systems administrator walking around, madly,
+shouting ``Who is eating all my inodes?! Who? Who!?!'', then you should
+know that this is probably the fastest format to use. You do not have
+to trudge through a big mbox file just to read your new mail.
-@menu
-* SOUP Commands:: Commands for creating and sending @sc{soup} packets
-* SOUP Groups:: A backend for reading @sc{soup} packets.
-* SOUP Replies:: How to enable @code{nnsoup} to take over mail and news.
-@end menu
+@code{nnml} is probably the slowest back end when it comes to article
+splitting. It has to create lots of files, and it also generates
+@acronym{NOV} databases for the incoming mails. This makes it possibly the
+fastest back end when it comes to reading mail.
+@cindex self contained nnml servers
+@cindex marks
+When the marks file is used (which it is by default), @code{nnml}
+servers have the property that you may backup them using @code{tar} or
+similar, and later be able to restore them into Gnus (by adding the
+proper @code{nnml} server) and have all your marks be preserved. Marks
+for a group is usually stored in the @code{.marks} file (but see
+@code{nnml-marks-file-name}) within each @code{nnml} group's directory.
+Individual @code{nnml} groups are also possible to backup, use @kbd{G m}
+to restore the group (after restoring the backup into the nnml
+directory).
+
+If for some reason you believe your @file{.marks} files are screwed
+up, you can just delete them all. Gnus will then correctly regenerate
+them next time it starts.
-@node SOUP Commands
-@subsubsection SOUP Commands
+Virtual server settings:
-These are commands for creating and manipulating @sc{soup} packets.
+@table @code
+@item nnml-directory
+@vindex nnml-directory
+All @code{nnml} directories will be placed under this directory. The
+default is the value of @code{message-directory} (whose default value
+is @file{~/Mail}).
-@table @kbd
-@item G s b
-@kindex G s b (Group)
-@findex gnus-group-brew-soup
-Pack all unread articles in the current group
-(@code{gnus-group-brew-soup}). This command understands the
-process/prefix convention.
+@item nnml-active-file
+@vindex nnml-active-file
+The active file for the @code{nnml} server. The default is
+@file{~/Mail/active}.
-@item G s w
-@kindex G s w (Group)
-@findex gnus-soup-save-areas
-Save all @sc{soup} data files (@code{gnus-soup-save-areas}).
+@item nnml-newsgroups-file
+@vindex nnml-newsgroups-file
+The @code{nnml} group descriptions file. @xref{Newsgroups File
+Format}. The default is @file{~/Mail/newsgroups}.
-@item G s s
-@kindex G s s (Group)
-@findex gnus-soup-send-replies
-Send all replies from the replies packet
-(@code{gnus-soup-send-replies}).
+@item nnml-get-new-mail
+@vindex nnml-get-new-mail
+If non-@code{nil}, @code{nnml} will read incoming mail. The default is
+@code{t}.
-@item G s p
-@kindex G s p (Group)
-@findex gnus-soup-pack-packet
-Pack all files into a @sc{soup} packet (@code{gnus-soup-pack-packet}).
+@item nnml-nov-is-evil
+@vindex nnml-nov-is-evil
+If non-@code{nil}, this back end will ignore any @acronym{NOV} files. The
+default is @code{nil}.
-@item G s r
-@kindex G s r (Group)
-@findex nnsoup-pack-replies
-Pack all replies into a replies packet (@code{nnsoup-pack-replies}).
+@item nnml-nov-file-name
+@vindex nnml-nov-file-name
+The name of the @acronym{NOV} files. The default is @file{.overview}.
-@item O s
-@kindex O s (Summary)
-@findex gnus-soup-add-article
-This summary-mode command adds the current article to a @sc{soup} packet
-(@code{gnus-soup-add-article}). It understands the process/prefix
-convention (@pxref{Process/Prefix}).
+@item nnml-prepare-save-mail-hook
+@vindex nnml-prepare-save-mail-hook
+Hook run narrowed to an article before saving.
-@end table
+@item nnml-marks-is-evil
+@vindex nnml-marks-is-evil
+If non-@code{nil}, this back end will ignore any @sc{marks} files. The
+default is @code{nil}.
+@item nnml-marks-file-name
+@vindex nnml-marks-file-name
+The name of the @dfn{marks} files. The default is @file{.marks}.
-There are a few variables to customize where Gnus will put all these
-thingies:
+@item nnml-use-compressed-files
+@vindex nnml-use-compressed-files
+If non-@code{nil}, @code{nnml} will allow using compressed message
+files.
-@table @code
+@end table
-@item gnus-soup-directory
-@vindex gnus-soup-directory
-Directory where Gnus will save intermediate files while composing
-@sc{soup} packets. The default is @file{~/SoupBrew/}.
+@findex nnml-generate-nov-databases
+If your @code{nnml} groups and @acronym{NOV} files get totally out of
+whack, you can do a complete update by typing @kbd{M-x
+nnml-generate-nov-databases}. This command will trawl through the
+entire @code{nnml} hierarchy, looking at each and every article, so it
+might take a while to complete. A better interface to this
+functionality can be found in the server buffer (@pxref{Server
+Commands}).
-@item gnus-soup-replies-directory
-@vindex gnus-soup-replies-directory
-This is what Gnus will use as a temporary directory while sending our
-reply packets. @file{~/SoupBrew/SoupReplies/} is the default.
-@item gnus-soup-prefix-file
-@vindex gnus-soup-prefix-file
-Name of the file where Gnus stores the last used prefix. The default is
-@samp{gnus-prefix}.
+@node MH Spool
+@subsubsection MH Spool
+@cindex nnmh
+@cindex mh-e mail spool
-@item gnus-soup-packer
-@vindex gnus-soup-packer
-A format string command for packing a @sc{soup} packet. The default is
-@samp{tar cf - %s | gzip > $HOME/Soupout%d.tgz}.
+@code{nnmh} is just like @code{nnml}, except that is doesn't generate
+@acronym{NOV} databases and it doesn't keep an active file or marks
+file. This makes @code{nnmh} a @emph{much} slower back end than
+@code{nnml}, but it also makes it easier to write procmail scripts
+for.
-@item gnus-soup-unpacker
-@vindex gnus-soup-unpacker
-Format string command for unpacking a @sc{soup} packet. The default is
-@samp{gunzip -c %s | tar xvf -}.
+Virtual server settings:
-@item gnus-soup-packet-directory
-@vindex gnus-soup-packet-directory
-Where Gnus will look for reply packets. The default is @file{~/}.
+@table @code
+@item nnmh-directory
+@vindex nnmh-directory
+All @code{nnmh} directories will be located under this directory. The
+default is the value of @code{message-directory} (whose default is
+@file{~/Mail})
-@item gnus-soup-packet-regexp
-@vindex gnus-soup-packet-regexp
-Regular expression matching @sc{soup} reply packets in
-@code{gnus-soup-packet-directory}.
+@item nnmh-get-new-mail
+@vindex nnmh-get-new-mail
+If non-@code{nil}, @code{nnmh} will read incoming mail. The default is
+@code{t}.
+@item nnmh-be-safe
+@vindex nnmh-be-safe
+If non-@code{nil}, @code{nnmh} will go to ridiculous lengths to make
+sure that the articles in the folder are actually what Gnus thinks
+they are. It will check date stamps and stat everything in sight, so
+setting this to @code{t} will mean a serious slow-down. If you never
+use anything but Gnus to read the @code{nnmh} articles, you do not
+have to set this variable to @code{t}. The default is @code{nil}.
@end table
-@node SOUP Groups
-@subsubsection @sc{soup} Groups
-@cindex nnsoup
+@node Maildir
+@subsubsection Maildir
+@cindex nnmaildir
+@cindex maildir
-@code{nnsoup} is the backend for reading @sc{soup} packets. It will
-read incoming packets, unpack them, and put them in a directory where
-you can read them at leisure.
+@code{nnmaildir} stores mail in the maildir format, with each maildir
+corresponding to a group in Gnus. This format is documented here:
+@uref{http://cr.yp.to/proto/maildir.html} and here:
+@uref{http://www.qmail.org/man/man5/maildir.html}. @code{nnmaildir}
+also stores extra information in the @file{.nnmaildir/} directory
+within a maildir.
-These are the variables you can use to customize its behavior:
+Maildir format was designed to allow concurrent deliveries and
+reading, without needing locks. With other back ends, you would have
+your mail delivered to a spool of some kind, and then you would
+configure Gnus to split mail from that spool into your groups. You
+can still do that with @code{nnmaildir}, but the more common
+configuration is to have your mail delivered directly to the maildirs
+that appear as group in Gnus.
+
+@code{nnmaildir} is designed to be perfectly reliable: @kbd{C-g} will
+never corrupt its data in memory, and @code{SIGKILL} will never
+corrupt its data in the filesystem.
+
+@code{nnmaildir} stores article marks and @acronym{NOV} data in each
+maildir. So you can copy a whole maildir from one Gnus setup to
+another, and you will keep your marks.
+
+Virtual server settings:
@table @code
+@item directory
+For each of your @code{nnmaildir} servers (it's very unlikely that
+you'd need more than one), you need to create a directory and populate
+it with maildirs or symlinks to maildirs (and nothing else; do not
+choose a directory already used for other purposes). Each maildir
+will be represented in Gnus as a newsgroup on that server; the
+filename of the symlink will be the name of the group. Any filenames
+in the directory starting with @samp{.} are ignored. The directory is
+scanned when you first start Gnus, and each time you type @kbd{g} in
+the group buffer; if any maildirs have been removed or added,
+@code{nnmaildir} notices at these times.
+
+The value of the @code{directory} parameter should be a Lisp form
+which is processed by @code{eval} and @code{expand-file-name} to get
+the path of the directory for this server. The form is @code{eval}ed
+only when the server is opened; the resulting string is used until the
+server is closed. (If you don't know about forms and @code{eval},
+don't worry---a simple string will work.) This parameter is not
+optional; you must specify it. I don't recommend using
+@code{"~/Mail"} or a subdirectory of it; several other parts of Gnus
+use that directory by default for various things, and may get confused
+if @code{nnmaildir} uses it too. @code{"~/.nnmaildir"} is a typical
+value.
-@item nnsoup-tmp-directory
-@vindex nnsoup-tmp-directory
-When @code{nnsoup} unpacks a @sc{soup} packet, it does it in this
-directory. (@file{/tmp/} by default.)
+@item target-prefix
+This should be a Lisp form which is processed by @code{eval} and
+@code{expand-file-name}. The form is @code{eval}ed only when the
+server is opened; the resulting string is used until the server is
+closed.
+
+When you create a group on an @code{nnmaildir} server, the maildir is
+created with @code{target-prefix} prepended to its name, and a symlink
+pointing to that maildir is created, named with the plain group name.
+So if @code{directory} is @code{"~/.nnmaildir"} and
+@code{target-prefix} is @code{"../maildirs/"}, then when you create
+the group @code{foo}, @code{nnmaildir} will create
+@file{~/.nnmaildir/../maildirs/foo} as a maildir, and will create
+@file{~/.nnmaildir/foo} as a symlink pointing to
+@file{../maildirs/foo}.
+
+You can set @code{target-prefix} to a string without any slashes to
+create both maildirs and symlinks in the same @code{directory}; in
+this case, any maildirs found in @code{directory} whose names start
+with @code{target-prefix} will not be listed as groups (but the
+symlinks pointing to them will be).
+
+As a special case, if @code{target-prefix} is @code{""} (the default),
+then when you create a group, the maildir will be created in
+@code{directory} without a corresponding symlink. Beware that you
+cannot use @code{gnus-group-delete-group} on such groups without the
+@code{force} argument.
+
+@item directory-files
+This should be a function with the same interface as
+@code{directory-files} (such as @code{directory-files} itself). It is
+used to scan the server's @code{directory} for maildirs. This
+parameter is optional; the default is
+@code{nnheader-directory-files-safe} if
+@code{nnheader-directory-files-is-safe} is @code{nil}, and
+@code{directory-files} otherwise.
+(@code{nnheader-directory-files-is-safe} is checked only once when the
+server is opened; if you want to check it each time the directory is
+scanned, you'll have to provide your own function that does that.)
+
+@item get-new-mail
+If non-@code{nil}, then after scanning for new mail in the group
+maildirs themselves as usual, this server will also incorporate mail
+the conventional Gnus way, from @code{mail-sources} according to
+@code{nnmail-split-methods} or @code{nnmail-split-fancy}. The default
+value is @code{nil}.
+
+Do @emph{not} use the same maildir both in @code{mail-sources} and as
+an @code{nnmaildir} group. The results might happen to be useful, but
+that would be by chance, not by design, and the results might be
+different in the future. If your split rules create new groups,
+remember to supply a @code{create-directory} server parameter.
+@end table
-@item nnsoup-directory
-@vindex nnsoup-directory
-@code{nnsoup} then moves each message and index file to this directory.
-The default is @file{~/SOUP/}.
+@subsubsection Group parameters
+
+@code{nnmaildir} uses several group parameters. It's safe to ignore
+all this; the default behavior for @code{nnmaildir} is the same as the
+default behavior for other mail back ends: articles are deleted after
+one week, etc. Except for the expiry parameters, all this
+functionality is unique to @code{nnmaildir}, so you can ignore it if
+you're just trying to duplicate the behavior you already have with
+another back end.
+
+If the value of any of these parameters is a vector, the first element
+is evaluated as a Lisp form and the result is used, rather than the
+original value. If the value is not a vector, the value itself is
+evaluated as a Lisp form. (This is why these parameters use names
+different from those of other, similar parameters supported by other
+back ends: they have different, though similar, meanings.) (For
+numbers, strings, @code{nil}, and @code{t}, you can ignore the
+@code{eval} business again; for other values, remember to use an extra
+quote and wrap the value in a vector when appropriate.)
-@item nnsoup-replies-directory
-@vindex nnsoup-replies-directory
-All replies will be stored in this directory before being packed into a
-reply packet. The default is @file{~/SOUP/replies/"}.
+@table @code
+@item expire-age
+An integer specifying the minimum age, in seconds, of an article
+before it will be expired, or the symbol @code{never} to specify that
+articles should never be expired. If this parameter is not set,
+@code{nnmaildir} falls back to the usual
+@code{nnmail-expiry-wait}(@code{-function}) variables (overrideable by
+the @code{expiry-wait}(@code{-function}) group parameters. If you
+wanted a value of 3 days, you could use something like @code{[(* 3 24
+60 60)]}; @code{nnmaildir} will evaluate the form and use the result.
+An article's age is measured starting from the article file's
+modification time. Normally, this is the same as the article's
+delivery time, but editing an article makes it younger. Moving an
+article (other than via expiry) may also make an article younger.
+
+@item expire-group
+If this is set to a string such as a full Gnus group name, like
+@example
+"backend+server.address.string:group.name"
+@end example
+and if it is not the name of the same group that the parameter belongs
+to, then articles will be moved to the specified group during expiry
+before being deleted. @emph{If this is set to an @code{nnmaildir}
+group, the article will be just as old in the destination group as it
+was in the source group.} So be careful with @code{expire-age} in the
+destination group. If this is set to the name of the same group that
+the parameter belongs to, then the article is not expired at all. If
+you use the vector form, the first element is evaluated once for each
+article. So that form can refer to
+@code{nnmaildir-article-file-name}, etc., to decide where to put the
+article. @emph{If this parameter is not set, @code{nnmaildir} does
+not fall back to the @code{expiry-target} group parameter or the
+@code{nnmail-expiry-target} variable.}
-@item nnsoup-replies-format-type
-@vindex nnsoup-replies-format-type
-The @sc{soup} format of the replies packets. The default is @samp{?n}
-(rnews), and I don't think you should touch that variable. I probably
-shouldn't even have documented it. Drats! Too late!
+@item read-only
+If this is set to @code{t}, @code{nnmaildir} will treat the articles
+in this maildir as read-only. This means: articles are not renamed
+from @file{new/} into @file{cur/}; articles are only found in
+@file{new/}, not @file{cur/}; articles are never deleted; articles
+cannot be edited. @file{new/} is expected to be a symlink to the
+@file{new/} directory of another maildir---e.g., a system-wide mailbox
+containing a mailing list of common interest. Everything in the
+maildir outside @file{new/} is @emph{not} treated as read-only, so for
+a shared mailbox, you do still need to set up your own maildir (or
+have write permission to the shared mailbox); your maildir just won't
+contain extra copies of the articles.
+
+@item directory-files
+A function with the same interface as @code{directory-files}. It is
+used to scan the directories in the maildir corresponding to this
+group to find articles. The default is the function specified by the
+server's @code{directory-files} parameter.
+
+@item distrust-Lines:
+If non-@code{nil}, @code{nnmaildir} will always count the lines of an
+article, rather than use the @code{Lines:} header field. If
+@code{nil}, the header field will be used if present.
+
+@item always-marks
+A list of mark symbols, such as @code{['(read expire)]}. Whenever
+Gnus asks @code{nnmaildir} for article marks, @code{nnmaildir} will
+say that all articles have these marks, regardless of whether the
+marks stored in the filesystem say so. This is a proof-of-concept
+feature that will probably be removed eventually; it ought to be done
+in Gnus proper, or abandoned if it's not worthwhile.
+
+@item never-marks
+A list of mark symbols, such as @code{['(tick expire)]}. Whenever
+Gnus asks @code{nnmaildir} for article marks, @code{nnmaildir} will
+say that no articles have these marks, regardless of whether the marks
+stored in the filesystem say so. @code{never-marks} overrides
+@code{always-marks}. This is a proof-of-concept feature that will
+probably be removed eventually; it ought to be done in Gnus proper, or
+abandoned if it's not worthwhile.
+
+@item nov-cache-size
+An integer specifying the size of the @acronym{NOV} memory cache. To
+speed things up, @code{nnmaildir} keeps @acronym{NOV} data in memory
+for a limited number of articles in each group. (This is probably not
+worthwhile, and will probably be removed in the future.) This
+parameter's value is noticed only the first time a group is seen after
+the server is opened---i.e., when you first start Gnus, typically.
+The @acronym{NOV} cache is never resized until the server is closed
+and reopened. The default is an estimate of the number of articles
+that would be displayed in the summary buffer: a count of articles
+that are either marked with @code{tick} or not marked with
+@code{read}, plus a little extra.
+@end table
-@item nnsoup-replies-index-type
-@vindex nnsoup-replies-index-type
-The index type of the replies packet. The default is @samp{?n}, which
-means ``none''. Don't fiddle with this one either!
+@subsubsection Article identification
+Articles are stored in the @file{cur/} subdirectory of each maildir.
+Each article file is named like @code{uniq:info}, where @code{uniq}
+contains no colons. @code{nnmaildir} ignores, but preserves, the
+@code{:info} part. (Other maildir readers typically use this part of
+the filename to store marks.) The @code{uniq} part uniquely
+identifies the article, and is used in various places in the
+@file{.nnmaildir/} subdirectory of the maildir to store information
+about the corresponding article. The full pathname of an article is
+available in the variable @code{nnmaildir-article-file-name} after you
+request the article in the summary buffer.
+
+@subsubsection NOV data
+An article identified by @code{uniq} has its @acronym{NOV} data (used
+to generate lines in the summary buffer) stored in
+@code{.nnmaildir/nov/uniq}. There is no
+@code{nnmaildir-generate-nov-databases} function. (There isn't much
+need for it---an article's @acronym{NOV} data is updated automatically
+when the article or @code{nnmail-extra-headers} has changed.) You can
+force @code{nnmaildir} to regenerate the @acronym{NOV} data for a
+single article simply by deleting the corresponding @acronym{NOV}
+file, but @emph{beware}: this will also cause @code{nnmaildir} to
+assign a new article number for this article, which may cause trouble
+with @code{seen} marks, the Agent, and the cache.
+
+@subsubsection Article marks
+An article identified by @code{uniq} is considered to have the mark
+@code{flag} when the file @file{.nnmaildir/marks/flag/uniq} exists.
+When Gnus asks @code{nnmaildir} for a group's marks, @code{nnmaildir}
+looks for such files and reports the set of marks it finds. When Gnus
+asks @code{nnmaildir} to store a new set of marks, @code{nnmaildir}
+creates and deletes the corresponding files as needed. (Actually,
+rather than create a new file for each mark, it just creates hard
+links to @file{.nnmaildir/markfile}, to save inodes.)
+
+You can invent new marks by creating a new directory in
+@file{.nnmaildir/marks/}. You can tar up a maildir and remove it from
+your server, untar it later, and keep your marks. You can add and
+remove marks yourself by creating and deleting mark files. If you do
+this while Gnus is running and your @code{nnmaildir} server is open,
+it's best to exit all summary buffers for @code{nnmaildir} groups and
+type @kbd{s} in the group buffer first, and to type @kbd{g} or
+@kbd{M-g} in the group buffer afterwards. Otherwise, Gnus might not
+pick up the changes, and might undo them.
-@item nnsoup-active-file
-@vindex nnsoup-active-file
-Where @code{nnsoup} stores lots of information. This is not an ``active
-file'' in the @code{nntp} sense; it's an Emacs Lisp file. If you lose
-this file or mess it up in any way, you're dead. The default is
-@file{~/SOUP/active}.
-@item nnsoup-packer
-@vindex nnsoup-packer
-Format string command for packing a reply @sc{soup} packet. The default
-is @samp{tar cf - %s | gzip > $HOME/Soupin%d.tgz}.
+@node Mail Folders
+@subsubsection Mail Folders
+@cindex nnfolder
+@cindex mbox folders
+@cindex mail folders
-@item nnsoup-unpacker
-@vindex nnsoup-unpacker
-Format string command for unpacking incoming @sc{soup} packets. The
-default is @samp{gunzip -c %s | tar xvf -}.
+@code{nnfolder} is a back end for storing each mail group in a
+separate file. Each file is in the standard Un*x mbox format.
+@code{nnfolder} will add extra headers to keep track of article
+numbers and arrival dates.
-@item nnsoup-packet-directory
-@vindex nnsoup-packet-directory
-Where @code{nnsoup} will look for incoming packets. The default is
-@file{~/}.
+@cindex self contained nnfolder servers
+@cindex marks
+When the marks file is used (which it is by default), @code{nnfolder}
+servers have the property that you may backup them using @code{tar} or
+similar, and later be able to restore them into Gnus (by adding the
+proper @code{nnfolder} server) and have all your marks be preserved.
+Marks for a group is usually stored in a file named as the mbox file
+with @code{.mrk} concatenated to it (but see
+@code{nnfolder-marks-file-suffix}) within the @code{nnfolder}
+directory. Individual @code{nnfolder} groups are also possible to
+backup, use @kbd{G m} to restore the group (after restoring the backup
+into the @code{nnfolder} directory).
-@item nnsoup-packet-regexp
-@vindex nnsoup-packet-regexp
-Regular expression matching incoming @sc{soup} packets. The default is
-@samp{Soupout}.
+Virtual server settings:
-@item nnsoup-always-save
-@vindex nnsoup-always-save
-If non-@code{nil}, save the replies buffer after each posted message.
+@table @code
+@item nnfolder-directory
+@vindex nnfolder-directory
+All the @code{nnfolder} mail boxes will be stored under this
+directory. The default is the value of @code{message-directory}
+(whose default is @file{~/Mail})
+
+@item nnfolder-active-file
+@vindex nnfolder-active-file
+The name of the active file. The default is @file{~/Mail/active}.
+
+@item nnfolder-newsgroups-file
+@vindex nnfolder-newsgroups-file
+The name of the group descriptions file. @xref{Newsgroups File
+Format}. The default is @file{~/Mail/newsgroups}
+
+@item nnfolder-get-new-mail
+@vindex nnfolder-get-new-mail
+If non-@code{nil}, @code{nnfolder} will read incoming mail. The
+default is @code{t}
+
+@item nnfolder-save-buffer-hook
+@vindex nnfolder-save-buffer-hook
+@cindex backup files
+Hook run before saving the folders. Note that Emacs does the normal
+backup renaming of files even with the @code{nnfolder} buffers. If
+you wish to switch this off, you could say something like the
+following in your @file{.emacs} file:
+
+@lisp
+(defun turn-off-backup ()
+ (set (make-local-variable 'backup-inhibited) t))
+
+(add-hook 'nnfolder-save-buffer-hook 'turn-off-backup)
+@end lisp
+
+@item nnfolder-delete-mail-hook
+@vindex nnfolder-delete-mail-hook
+Hook run in a buffer narrowed to the message that is to be deleted.
+This function can be used to copy the message to somewhere else, or to
+extract some information from it before removing it.
+
+@item nnfolder-nov-is-evil
+@vindex nnfolder-nov-is-evil
+If non-@code{nil}, this back end will ignore any @acronym{NOV} files. The
+default is @code{nil}.
+
+@item nnfolder-nov-file-suffix
+@vindex nnfolder-nov-file-suffix
+The extension for @acronym{NOV} files. The default is @file{.nov}.
+
+@item nnfolder-nov-directory
+@vindex nnfolder-nov-directory
+The directory where the @acronym{NOV} files should be stored. If
+@code{nil}, @code{nnfolder-directory} is used.
+
+@item nnfolder-marks-is-evil
+@vindex nnfolder-marks-is-evil
+If non-@code{nil}, this back end will ignore any @sc{marks} files. The
+default is @code{nil}.
+
+@item nnfolder-marks-file-suffix
+@vindex nnfolder-marks-file-suffix
+The extension for @sc{marks} files. The default is @file{.mrk}.
+
+@item nnfolder-marks-directory
+@vindex nnfolder-marks-directory
+The directory where the @sc{marks} files should be stored. If
+@code{nil}, @code{nnfolder-directory} is used.
@end table
-@node SOUP Replies
-@subsubsection SOUP Replies
+@findex nnfolder-generate-active-file
+@kindex M-x nnfolder-generate-active-file
+If you have lots of @code{nnfolder}-like files you'd like to read with
+@code{nnfolder}, you can use the @kbd{M-x nnfolder-generate-active-file}
+command to make @code{nnfolder} aware of all likely files in
+@code{nnfolder-directory}. This only works if you use long file names,
+though.
+
+@node Comparing Mail Back Ends
+@subsubsection Comparing Mail Back Ends
+
+First, just for terminology, the @dfn{back end} is the common word for a
+low-level access method---a transport, if you will, by which something
+is acquired. The sense is that one's mail has to come from somewhere,
+and so selection of a suitable back end is required in order to get that
+mail within spitting distance of Gnus.
+
+The same concept exists for Usenet itself: Though access to articles is
+typically done by @acronym{NNTP} these days, once upon a midnight dreary, everyone
+in the world got at Usenet by running a reader on the machine where the
+articles lay (the machine which today we call an @acronym{NNTP} server), and
+access was by the reader stepping into the articles' directory spool
+area directly. One can still select between either the @code{nntp} or
+@code{nnspool} back ends, to select between these methods, if one happens
+actually to live on the server (or can see its spool directly, anyway,
+via NFS).
+
+The goal in selecting a mail back end is to pick one which
+simultaneously represents a suitable way of dealing with the original
+format plus leaving mail in a form that is convenient to use in the
+future. Here are some high and low points on each:
-Just using @code{nnsoup} won't mean that your postings and mailings end
-up in @sc{soup} reply packets automagically. You have to work a bit
-more for that to happen.
+@table @code
+@item nnmbox
+
+UNIX systems have historically had a single, very common, and well-
+defined format. All messages arrive in a single @dfn{spool file}, and
+they are delineated by a line whose regular expression matches
+@samp{^From_}. (My notational use of @samp{_} is to indicate a space,
+to make it clear in this instance that this is not the RFC-specified
+@samp{From:} header.) Because Emacs and therefore Gnus emanate
+historically from the Unix environment, it is simplest if one does not
+mess a great deal with the original mailbox format, so if one chooses
+this back end, Gnus' primary activity in getting mail from the real spool
+area to Gnus' preferred directory is simply to copy it, with no
+(appreciable) format change in the process. It is the ``dumbest'' way
+to move mail into availability in the Gnus environment. This makes it
+fast to move into place, but slow to parse, when Gnus has to look at
+what's where.
+
+@item nnbabyl
+
+Once upon a time, there was the DEC-10 and DEC-20, running operating
+systems called TOPS and related things, and the usual (only?) mail
+reading environment was a thing called Babyl. I don't know what format
+was used for mail landing on the system, but Babyl had its own internal
+format to which mail was converted, primarily involving creating a
+spool-file-like entity with a scheme for inserting Babyl-specific
+headers and status bits above the top of each message in the file.
+Rmail was Emacs' first mail reader, it was written by Richard Stallman,
+and Stallman came out of that TOPS/Babyl environment, so he wrote Rmail
+to understand the mail files folks already had in existence. Gnus (and
+VM, for that matter) continue to support this format because it's
+perceived as having some good qualities in those mailer-specific
+headers/status bits stuff. Rmail itself still exists as well, of
+course, and is still maintained by Stallman.
+
+Both of the above forms leave your mail in a single file on your
+file system, and they must parse that entire file each time you take a
+look at your mail.
+
+@item nnml
+
+@code{nnml} is the back end which smells the most as though you were
+actually operating with an @code{nnspool}-accessed Usenet system. (In
+fact, I believe @code{nnml} actually derived from @code{nnspool} code,
+lo these years ago.) One's mail is taken from the original spool file,
+and is then cut up into individual message files, 1:1. It maintains a
+Usenet-style active file (analogous to what one finds in an INN- or
+CNews-based news system in (for instance) @file{/var/lib/news/active},
+or what is returned via the @samp{NNTP LIST} verb) and also creates
+@dfn{overview} files for efficient group entry, as has been defined for
+@acronym{NNTP} servers for some years now. It is slower in mail-splitting,
+due to the creation of lots of files, updates to the @code{nnml} active
+file, and additions to overview files on a per-message basis, but it is
+extremely fast on access because of what amounts to the indexing support
+provided by the active file and overviews.
+
+@code{nnml} costs @dfn{inodes} in a big way; that is, it soaks up the
+resource which defines available places in the file system to put new
+files. Sysadmins take a dim view of heavy inode occupation within
+tight, shared file systems. But if you live on a personal machine where
+the file system is your own and space is not at a premium, @code{nnml}
+wins big.
+
+It is also problematic using this back end if you are living in a
+FAT16-based Windows world, since much space will be wasted on all these
+tiny files.
+
+@item nnmh
+
+The Rand MH mail-reading system has been around UNIX systems for a very
+long time; it operates by splitting one's spool file of messages into
+individual files, but with little or no indexing support---@code{nnmh}
+is considered to be semantically equivalent to ``@code{nnml} without
+active file or overviews''. This is arguably the worst choice, because
+one gets the slowness of individual file creation married to the
+slowness of access parsing when learning what's new in one's groups.
+
+@item nnfolder
+
+Basically the effect of @code{nnfolder} is @code{nnmbox} (the first
+method described above) on a per-group basis. That is, @code{nnmbox}
+itself puts @emph{all} one's mail in one file; @code{nnfolder} provides a
+little bit of optimization to this so that each of one's mail groups has
+a Unix mail box file. It's faster than @code{nnmbox} because each group
+can be parsed separately, and still provides the simple Unix mail box
+format requiring minimal effort in moving the mail around. In addition,
+it maintains an ``active'' file making it much faster for Gnus to figure
+out how many messages there are in each separate group.
+
+If you have groups that are expected to have a massive amount of
+messages, @code{nnfolder} is not the best choice, but if you receive
+only a moderate amount of mail, @code{nnfolder} is probably the most
+friendly mail back end all over.
+
+@item nnmaildir
+
+For configuring expiry and other things, @code{nnmaildir} uses
+incompatible group parameters, slightly different from those of other
+mail back ends.
+
+@code{nnmaildir} is largely similar to @code{nnml}, with some notable
+differences. Each message is stored in a separate file, but the
+filename is unrelated to the article number in Gnus. @code{nnmaildir}
+also stores the equivalent of @code{nnml}'s overview files in one file
+per article, so it uses about twice as many inodes as @code{nnml}. (Use
+@code{df -i} to see how plentiful your inode supply is.) If this slows
+you down or takes up very much space, consider switching to
+@uref{http://www.namesys.com/, ReiserFS} or another non-block-structured
+file system.
+
+Since maildirs don't require locking for delivery, the maildirs you use
+as groups can also be the maildirs your mail is directly delivered to.
+This means you can skip Gnus' mail splitting if your mail is already
+organized into different mailboxes during delivery. A @code{directory}
+entry in @code{mail-sources} would have a similar effect, but would
+require one set of mailboxes for spooling deliveries (in mbox format,
+thus damaging message bodies), and another set to be used as groups (in
+whatever format you like). A maildir has a built-in spool, in the
+@code{new/} subdirectory. Beware that currently, mail moved from
+@code{new/} to @code{cur/} instead of via mail splitting will not
+undergo treatment such as duplicate checking.
+
+@code{nnmaildir} stores article marks for a given group in the
+corresponding maildir, in a way designed so that it's easy to manipulate
+them from outside Gnus. You can tar up a maildir, unpack it somewhere
+else, and still have your marks. @code{nnml} also stores marks, but
+it's not as easy to work with them from outside Gnus as with
+@code{nnmaildir}.
+
+@code{nnmaildir} uses a significant amount of memory to speed things up.
+(It keeps in memory some of the things that @code{nnml} stores in files
+and that @code{nnmh} repeatedly parses out of message files.) If this
+is a problem for you, you can set the @code{nov-cache-size} group
+parameter to something small (0 would probably not work, but 1 probably
+would) to make it use less memory. This caching will probably be
+removed in the future.
+
+Startup is likely to be slower with @code{nnmaildir} than with other
+back ends. Everything else is likely to be faster, depending in part
+on your file system.
+
+@code{nnmaildir} does not use @code{nnoo}, so you cannot use @code{nnoo}
+to write an @code{nnmaildir}-derived back end.
-@findex nnsoup-set-variables
-The @code{nnsoup-set-variables} command will set the appropriate
-variables to ensure that all your followups and replies end up in the
-@sc{soup} system.
+@end table
-In specific, this is what it does:
-@lisp
-(setq message-send-news-function 'nnsoup-request-post)
-(setq message-send-mail-function 'nnsoup-request-mail)
-@end lisp
+@node Browsing the Web
+@section Browsing the Web
+@cindex web
+@cindex browsing the web
+@cindex www
+@cindex http
-And that's it, really. If you only want news to go into the @sc{soup}
-system you just use the first line. If you only want mail to be
-@sc{soup}ed you use the second.
+Web-based discussion forums are getting more and more popular. On many
+subjects, the web-based forums have become the most important forums,
+eclipsing the importance of mailing lists and news groups. The reason
+is easy to understand---they are friendly to new users; you just point
+and click, and there's the discussion. With mailing lists, you have to
+go through a cumbersome subscription procedure, and most people don't
+even know what a news group is.
+
+The problem with this scenario is that web browsers are not very good at
+being newsreaders. They do not keep track of what articles you've read;
+they do not allow you to score on subjects you're interested in; they do
+not allow off-line browsing; they require you to click around and drive
+you mad in the end.
+
+So---if web browsers suck at reading discussion forums, why not use Gnus
+to do it instead?
+
+Gnus has been getting a bit of a collection of back ends for providing
+interfaces to these sources.
+
+@menu
+* Archiving Mail::
+* Web Searches:: Creating groups from articles that match a string.
+* Slashdot:: Reading the Slashdot comments.
+* Ultimate:: The Ultimate Bulletin Board systems.
+* Web Archive:: Reading mailing list archived on web.
+* RSS:: Reading RDF site summary.
+* Customizing w3:: Doing stuff to Emacs/w3 from Gnus.
+@end menu
+All the web sources require Emacs/w3 and the url library to work.
+
+The main caveat with all these web sources is that they probably won't
+work for a very long time. Gleaning information from the @acronym{HTML} data
+is guesswork at best, and when the layout is altered, the Gnus back end
+will fail. If you have reasonably new versions of these back ends,
+though, you should be ok.
+
+One thing all these Web methods have in common is that the Web sources
+are often down, unavailable or just plain too slow to be fun. In those
+cases, it makes a lot of sense to let the Gnus Agent (@pxref{Gnus
+Unplugged}) handle downloading articles, and then you can read them at
+leisure from your local disk. No more World Wide Wait for you.
+
+@node Archiving Mail
+@subsection Archiving Mail
+@cindex archiving mail
+@cindex backup of mail
+
+Some of the back ends, notably @code{nnml}, @code{nnfolder}, and
+@code{nnmaildir}, now actually store the article marks with each group.
+For these servers, archiving and restoring a group while preserving
+marks is fairly simple.
+
+(Preserving the group level and group parameters as well still
+requires ritual dancing and sacrifices to the @file{.newsrc.eld} deity
+though.)
+
+To archive an entire @code{nnml}, @code{nnfolder}, or @code{nnmaildir}
+server, take a recursive copy of the server directory. There is no need
+to shut down Gnus, so archiving may be invoked by @code{cron} or
+similar. You restore the data by restoring the directory tree, and
+adding a server definition pointing to that directory in Gnus. The
+@ref{Article Backlog}, @ref{Asynchronous Fetching} and other things
+might interfere with overwriting data, so you may want to shut down Gnus
+before you restore the data.
+
+It is also possible to archive individual @code{nnml},
+@code{nnfolder}, or @code{nnmaildir} groups, while preserving marks.
+For @code{nnml} or @code{nnmaildir}, you copy all files in the group's
+directory. For @code{nnfolder} you need to copy both the base folder
+file itself (@file{FOO}, say), and the marks file (@file{FOO.mrk} in
+this example). Restoring the group is done with @kbd{G m} from the Group
+buffer. The last step makes Gnus notice the new directory.
+@code{nnmaildir} notices the new directory automatically, so @kbd{G m}
+is unnecessary in that case.
@node Web Searches
@subsection Web Searches
@cindex nnweb
-@cindex DejaNews
-@cindex Alta Vista
-@cindex InReference
+@cindex Google
+@cindex dejanews
+@cindex gmane
@cindex Usenet searches
@cindex searching the Usenet
the commercials, so, like, with Gnus you can do @emph{rad}, rilly,
searches without having to use a browser.
-The @code{nnweb} backend allows an easy interface to the mighty search
+The @code{nnweb} back end allows an easy interface to the mighty search
engine. You create an @code{nnweb} group, enter a search pattern, and
then enter the group and read the articles like you would any normal
group. The @kbd{G w} command in the group buffer (@pxref{Foreign
manner. Not even using duplicate suppression (@pxref{Duplicate
Suppression}) will help, since @code{nnweb} doesn't even know the
@code{Message-ID} of the articles before reading them using some search
-engines (DejaNews, for instance). The only possible way to keep track
+engines (Google, for instance). The only possible way to keep track
of which articles you've read is by scoring on the @code{Date}
header---mark all articles posted before the last date you read the
group as read.
If the search engine changes its output substantially, @code{nnweb}
won't be able to parse it and will fail. One could hardly fault the Web
-providers if they were to do this---their @emph{raison d'être} is to
+providers if they were to do this---their @emph{raison d'@^etre} is to
make money off of advertisements, not to provide services to the
community. Since @code{nnweb} washes the ads off all the articles, one
might think that the providers might be somewhat miffed. We'll see.
@item nnweb-type
@vindex nnweb-type
What search engine type is being used. The currently supported types
-are @code{dejanews}, @code{dejanewsold}, @code{altavista} and
-@code{reference}.
+are @code{google}, @code{dejanews}, and @code{gmane}. Note that
+@code{dejanews} is an alias to @code{google}.
@item nnweb-search
@vindex nnweb-search
@item nnweb-max-hits
@vindex nnweb-max-hits
Advisory maximum number of hits per search to display. The default is
-100.
+999.
@item nnweb-type-definition
@vindex nnweb-type-definition
@end table
+@node Slashdot
+@subsection Slashdot
+@cindex Slashdot
+@cindex nnslashdot
-@node Mail-To-News Gateways
-@subsection Mail-To-News Gateways
-@cindex mail-to-news gateways
-@cindex gateways
+@uref{http://slashdot.org/, Slashdot} is a popular news site, with
+lively discussion following the news articles. @code{nnslashdot} will
+let you read this forum in a convenient manner.
-If your local @code{nntp} server doesn't allow posting, for some reason
-or other, you can post using one of the numerous mail-to-news gateways.
-The @code{nngateway} backend provides the interface.
+The easiest way to read this source is to put something like the
+following in your @file{~/.gnus.el} file:
-Note that you can't read anything from this backend---it can only be
-used to post with.
+@lisp
+(setq gnus-secondary-select-methods
+ '((nnslashdot "")))
+@end lisp
-Server variables:
+This will make Gnus query the @code{nnslashdot} back end for new comments
+and groups. The @kbd{F} command will subscribe each new news article as
+a new Gnus group, and you can read the comments by entering these
+groups. (Note that the default subscription method is to subscribe new
+groups as zombies. Other methods are available (@pxref{Subscription
+Methods}).
+
+If you want to remove an old @code{nnslashdot} group, the @kbd{G DEL}
+command is the most handy tool (@pxref{Foreign Groups}).
+
+When following up to @code{nnslashdot} comments (or posting new
+comments), some light @acronym{HTML}izations will be performed. In
+particular, text quoted with @samp{> } will be quoted with
+@samp{blockquote} instead, and signatures will have @samp{br} added to
+the end of each line. Other than that, you can just write @acronym{HTML}
+directly into the message buffer. Note that Slashdot filters out some
+@acronym{HTML} forms.
+
+The following variables can be altered to change its behavior:
@table @code
-@item nngateway-address
-@vindex nngateway-address
-This is the address of the mail-to-news gateway.
+@item nnslashdot-threaded
+Whether @code{nnslashdot} should display threaded groups or not. The
+default is @code{t}. To be able to display threads, @code{nnslashdot}
+has to retrieve absolutely all comments in a group upon entry. If a
+threaded display is not required, @code{nnslashdot} will only retrieve
+the comments that are actually wanted by the user. Threading is nicer,
+but much, much slower than unthreaded.
+
+@item nnslashdot-login-name
+@vindex nnslashdot-login-name
+The login name to use when posting.
+
+@item nnslashdot-password
+@vindex nnslashdot-password
+The password to use when posting.
+
+@item nnslashdot-directory
+@vindex nnslashdot-directory
+Where @code{nnslashdot} will store its files. The default is
+@file{~/News/slashdot/}.
+
+@item nnslashdot-active-url
+@vindex nnslashdot-active-url
+The @acronym{URL} format string that will be used to fetch the
+information on news articles and comments. The default is@*
+@samp{http://slashdot.org/search.pl?section=&min=%d}.
+
+@item nnslashdot-comments-url
+@vindex nnslashdot-comments-url
+The @acronym{URL} format string that will be used to fetch comments.
+
+@item nnslashdot-article-url
+@vindex nnslashdot-article-url
+The @acronym{URL} format string that will be used to fetch the news
+article. The default is
+@samp{http://slashdot.org/article.pl?sid=%s&mode=nocomment}.
+
+@item nnslashdot-threshold
+@vindex nnslashdot-threshold
+The score threshold. The default is -1.
+
+@item nnslashdot-group-number
+@vindex nnslashdot-group-number
+The number of old groups, in addition to the ten latest, to keep
+updated. The default is 0.
-@item nngateway-header-transformation
-@vindex nngateway-header-transformation
-News headers often have to be transformed in some odd way or other
-for the mail-to-news gateway to accept it. This variable says what
-transformation should be called, and defaults to
-@code{nngateway-simple-header-transformation}. The function is called
-narrowed to the headers to be transformed and with one parameter---the
-gateway address.
+@end table
-This default function just inserts a new @code{To} header based on the
-@code{Newsgroups} header and the gateway address.
-For instance, an article with this @code{Newsgroups} header:
-@example
-Newsgroups: alt.religion.emacs
-@end example
-will get this @code{From} header inserted:
+@node Ultimate
+@subsection Ultimate
+@cindex nnultimate
+@cindex Ultimate Bulletin Board
-@example
-To: alt-religion-emacs@@GATEWAY
-@end example
+@uref{http://www.ultimatebb.com/, The Ultimate Bulletin Board} is
+probably the most popular Web bulletin board system used. It has a
+quite regular and nice interface, and it's possible to get the
+information Gnus needs to keep groups updated.
-The following pre-defined functions exist:
+The easiest way to get started with @code{nnultimate} is to say
+something like the following in the group buffer: @kbd{B nnultimate RET
+http://www.tcj.com/messboard/ubbcgi/ RET}. (Substitute the @acronym{URL}
+(not including @samp{Ultimate.cgi} or the like at the end) for a forum
+you're interested in; there's quite a list of them on the Ultimate web
+site.) Then subscribe to the groups you're interested in from the
+server buffer, and read them from the group buffer.
+
+The following @code{nnultimate} variables can be altered:
-@findex nngateway-simple-header-transformation
@table @code
+@item nnultimate-directory
+@vindex nnultimate-directory
+The directory where @code{nnultimate} stores its files. The default is@*
+@file{~/News/ultimate/}.
+@end table
-@item nngateway-simple-header-transformation
-Creates a @code{To} header that looks like
-@var{newsgroup}@@@code{nngateway-address}.
-@findex nngateway-mail2news-header-transformation
+@node Web Archive
+@subsection Web Archive
+@cindex nnwarchive
+@cindex Web Archive
-@item nngateway-mail2news-header-transformation
-Creates a @code{To} header that looks like
-@code{nngateway-address}.
+Some mailing lists only have archives on Web servers, such as
+@uref{http://www.egroups.com/} and
+@uref{http://www.mail-archive.com/}. It has a quite regular and nice
+interface, and it's possible to get the information Gnus needs to keep
+groups updated.
-Here's an example:
+@findex gnus-group-make-warchive-group
+The easiest way to get started with @code{nnwarchive} is to say
+something like the following in the group buffer: @kbd{M-x
+gnus-group-make-warchive-group RET @var{an_egroup} RET egroups RET
+www.egroups.com RET @var{your@@email.address} RET}. (Substitute the
+@var{an_egroup} with the mailing list you subscribed, the
+@var{your@@email.address} with your email address.), or to browse the
+back end by @kbd{B nnwarchive RET mail-archive RET}.
-@lisp
-(setq gnus-post-method
- '(nngateway "mail2news@@replay.com"
- (nngateway-header-transformation
- nngateway-mail2news-header-transformation)))
-@end lisp
+The following @code{nnwarchive} variables can be altered:
+@table @code
+@item nnwarchive-directory
+@vindex nnwarchive-directory
+The directory where @code{nnwarchive} stores its files. The default is@*
+@file{~/News/warchive/}.
+
+@item nnwarchive-login
+@vindex nnwarchive-login
+The account name on the web server.
+
+@item nnwarchive-passwd
+@vindex nnwarchive-passwd
+The password for your account on the web server.
@end table
+@node RSS
+@subsection RSS
+@cindex nnrss
+@cindex RSS
-@end table
+Some web sites have an RDF Site Summary (@acronym{RSS}).
+@acronym{RSS} is a format for summarizing headlines from news related
+sites (such as BBC or CNN). But basically anything list-like can be
+presented as an @acronym{RSS} feed: weblogs, changelogs or recent
+changes to a wiki (e.g. @url{http://cliki.net/recent-changes.rdf}).
-So, to use this, simply say something like:
+@acronym{RSS} has a quite regular and nice interface, and it's
+possible to get the information Gnus needs to keep groups updated.
-@lisp
-(setq gnus-post-method '(nngateway "GATEWAY.ADDRESS"))
-@end lisp
+@kindex G R (Summary)
+Use @kbd{G R} from the summary buffer to subscribe to a feed---you
+will be prompted for the location of the feed.
+An easy way to get started with @code{nnrss} is to say something like
+the following in the group buffer: @kbd{B nnrss RET y}, then
+subscribe to groups.
-@node Combined Groups
-@section Combined Groups
+@cindex OPML
+You can also use the following commands to import and export your
+subscriptions from a file in @acronym{OPML} format (Outline Processor
+Markup Language).
-Gnus allows combining a mixture of all the other group types into bigger
-groups.
+@defun nnrss-opml-import file
+Prompt for an @acronym{OPML} file, and subscribe to each feed in the
+file.
+@end defun
-@menu
-* Virtual Groups:: Combining articles from many groups.
-* Kibozed Groups:: Looking through parts of the newsfeed for articles.
-@end menu
+@defun nnrss-opml-export
+Write your current @acronym{RSS} subscriptions to a buffer in
+@acronym{OPML} format.
+@end defun
+The following @code{nnrss} variables can be altered:
-@node Virtual Groups
-@subsection Virtual Groups
-@cindex nnvirtual
-@cindex virtual groups
-@cindex merging groups
+@table @code
+@item nnrss-directory
+@vindex nnrss-directory
+The directory where @code{nnrss} stores its files. The default is
+@file{~/News/rss/}.
+
+@item nnrss-use-local
+@vindex nnrss-use-local
+@findex nnrss-generate-download-script
+If you set @code{nnrss-use-local} to @code{t}, @code{nnrss} will read
+the feeds from local files in @code{nnrss-directory}. You can use
+the command @code{nnrss-generate-download-script} to generate a
+download script using @command{wget}.
+@end table
-An @dfn{nnvirtual group} is really nothing more than a collection of
-other groups.
+The following code may be helpful, if you want to show the description in
+the summary buffer.
-For instance, if you are tired of reading many small groups, you can
-put them all in one big group, and then grow tired of reading one
-big, unwieldy group. The joys of computing!
+@lisp
+(add-to-list 'nnmail-extra-headers nnrss-description-field)
+(setq gnus-summary-line-format "%U%R%z%I%(%[%4L: %-15,15f%]%) %s%uX\n")
-You specify @code{nnvirtual} as the method. The address should be a
-regexp to match component groups.
+(defun gnus-user-format-function-X (header)
+ (let ((descr
+ (assq nnrss-description-field (mail-header-extra header))))
+ (if descr (concat "\n\t" (cdr descr)) "")))
+@end lisp
-All marks in the virtual group will stick to the articles in the
-component groups. So if you tick an article in a virtual group, the
-article will also be ticked in the component group from whence it came.
-(And vice versa---marks from the component groups will also be shown in
-the virtual group.)
+The following code may be useful to open an nnrss url directly from the
+summary buffer.
+@lisp
+(require 'browse-url)
+
+(defun browse-nnrss-url( arg )
+ (interactive "p")
+ (let ((url (assq nnrss-url-field
+ (mail-header-extra
+ (gnus-data-header
+ (assq (gnus-summary-article-number)
+ gnus-newsgroup-data))))))
+ (if url
+ (progn
+ (browse-url (cdr url))
+ (gnus-summary-mark-as-read-forward 1))
+ (gnus-summary-scroll-up arg))))
+
+(eval-after-load "gnus"
+ #'(define-key gnus-summary-mode-map
+ (kbd "<RET>") 'browse-nnrss-url))
+(add-to-list 'nnmail-extra-headers nnrss-url-field)
+@end lisp
-Here's an example @code{nnvirtual} method that collects all Andrea Dworkin
-newsgroups into one, big, happy newsgroup:
+@node Customizing w3
+@subsection Customizing w3
+@cindex w3
+@cindex html
+@cindex url
+@cindex Netscape
+
+Gnus uses the url library to fetch web pages and Emacs/w3 to display web
+pages. Emacs/w3 is documented in its own manual, but there are some
+things that may be more relevant for Gnus users.
+
+For instance, a common question is how to make Emacs/w3 follow links
+using the @code{browse-url} functions (which will call some external web
+browser like Netscape). Here's one way:
@lisp
-(nnvirtual "^alt\\.fan\\.andrea-dworkin$\\|^rec\\.dworkin.*")
+(eval-after-load "w3"
+ '(progn
+ (fset 'w3-fetch-orig (symbol-function 'w3-fetch))
+ (defun w3-fetch (&optional url target)
+ (interactive (list (w3-read-url-with-default)))
+ (if (eq major-mode 'gnus-article-mode)
+ (browse-url url)
+ (w3-fetch-orig url target)))))
@end lisp
-The component groups can be native or foreign; everything should work
-smoothly, but if your computer explodes, it was probably my fault.
+Put that in your @file{.emacs} file, and hitting links in w3-rendered
+@acronym{HTML} in the Gnus article buffers will use @code{browse-url} to
+follow the link.
-Collecting the same group from several servers might actually be a good
-idea if users have set the Distribution header to limit distribution.
-If you would like to read @samp{soc.motss} both from a server in Japan
-and a server in Norway, you could use the following as the group regexp:
-@example
-"^nntp\\+server\\.jp:soc\\.motss$\\|^nntp\\+server\\.no:soc\\.motss$"
-@end example
+@node IMAP
+@section IMAP
+@cindex nnimap
+@cindex @acronym{IMAP}
-(Remember, though, that if you're creating the group with @kbd{G m}, you
-shouldn't double the backslashes, and you should leave off the quote
-characters at the beginning and the end of the string.)
+@acronym{IMAP} is a network protocol for reading mail (or news, or @dots{}),
+think of it as a modernized @acronym{NNTP}. Connecting to a @acronym{IMAP}
+server is much similar to connecting to a news server, you just
+specify the network address of the server.
-This should work kinda smoothly---all articles from both groups should
-end up in this one, and there should be no duplicates. Threading (and
-the rest) will still work as usual, but there might be problems with the
-sequence of articles. Sorting on date might be an option here
-(@pxref{Selecting a Group}).
+@acronym{IMAP} has two properties. First, @acronym{IMAP} can do
+everything that @acronym{POP} can, it can hence be viewed as a
+@acronym{POP++}. Secondly, @acronym{IMAP} is a mail storage protocol,
+similar to @acronym{NNTP} being a news storage protocol---however,
+@acronym{IMAP} offers more features than @acronym{NNTP} because news
+is more or less read-only whereas mail is read-write.
-One limitation, however---all groups included in a virtual
-group have to be alive (i.e., subscribed or unsubscribed). Killed or
-zombie groups can't be component groups for @code{nnvirtual} groups.
+If you want to use @acronym{IMAP} as a @acronym{POP++}, use an imap
+entry in @code{mail-sources}. With this, Gnus will fetch mails from
+the @acronym{IMAP} server and store them on the local disk. This is
+not the usage described in this section---@xref{Mail Sources}.
-@vindex nnvirtual-always-rescan
-If the @code{nnvirtual-always-rescan} is non-@code{nil},
-@code{nnvirtual} will always scan groups for unread articles when
-entering a virtual group. If this variable is @code{nil} (which is the
-default) and you read articles in a component group after the virtual
-group has been activated, the read articles from the component group
-will show up when you enter the virtual group. You'll also see this
-effect if you have two virtual groups that have a component group in
-common. If that's the case, you should set this variable to @code{t}.
-Or you can just tap @code{M-g} on the virtual group every time before
-you enter it---it'll have much the same effect.
+If you want to use @acronym{IMAP} as a mail storage protocol, use an nnimap
+entry in @code{gnus-secondary-select-methods}. With this, Gnus will
+manipulate mails stored on the @acronym{IMAP} server. This is the kind of
+usage explained in this section.
-@code{nnvirtual} can have both mail and news groups as component groups.
-When responding to articles in @code{nnvirtual} groups, @code{nnvirtual}
-has to ask the backend of the component group the article comes from
-whether it is a news or mail backend. However, when you do a @kbd{^},
-there is typically no sure way for the component backend to know this,
-and in that case @code{nnvirtual} tells Gnus that the article came from a
-not-news backend. (Just to be on the safe side.)
+A server configuration in @file{~/.gnus.el} with a few @acronym{IMAP}
+servers might look something like the following. (Note that for
+@acronym{TLS}/@acronym{SSL}, you need external programs and libraries,
+see below.)
-@kbd{C-c C-t} in the message buffer will insert the @code{Newsgroups}
-line from the article you respond to in these cases.
+@lisp
+(setq gnus-secondary-select-methods
+ '((nnimap "simpleserver") ; @r{no special configuration}
+ ; @r{perhaps a ssh port forwarded server:}
+ (nnimap "dolk"
+ (nnimap-address "localhost")
+ (nnimap-server-port 1430))
+ ; @r{a UW server running on localhost}
+ (nnimap "barbar"
+ (nnimap-server-port 143)
+ (nnimap-address "localhost")
+ (nnimap-list-pattern ("INBOX" "mail/*")))
+ ; @r{anonymous public cyrus server:}
+ (nnimap "cyrus.andrew.cmu.edu"
+ (nnimap-authenticator anonymous)
+ (nnimap-list-pattern "archive.*")
+ (nnimap-stream network))
+ ; @r{a ssl server on a non-standard port:}
+ (nnimap "vic20"
+ (nnimap-address "vic20.somewhere.com")
+ (nnimap-server-port 9930)
+ (nnimap-stream ssl))))
+@end lisp
+After defining the new server, you can subscribe to groups on the
+server using normal Gnus commands such as @kbd{U} in the Group Buffer
+(@pxref{Subscription Commands}) or via the Server Buffer
+(@pxref{Server Buffer}).
+The following variables can be used to create a virtual @code{nnimap}
+server:
-@node Kibozed Groups
-@subsection Kibozed Groups
-@cindex nnkiboze
-@cindex kibozing
+@table @code
-@dfn{Kibozing} is defined by @sc{oed} as ``grepping through (parts of)
-the news feed''. @code{nnkiboze} is a backend that will do this for
-you. Oh joy! Now you can grind any @sc{nntp} server down to a halt
-with useless requests! Oh happiness!
+@item nnimap-address
+@vindex nnimap-address
-@kindex G k (Group)
-To create a kibozed group, use the @kbd{G k} command in the group
-buffer.
+The address of the remote @acronym{IMAP} server. Defaults to the virtual
+server name if not specified.
-The address field of the @code{nnkiboze} method is, as with
-@code{nnvirtual}, a regexp to match groups to be ``included'' in the
-@code{nnkiboze} group. That's where most similarities between @code{nnkiboze}
-and @code{nnvirtual} end.
+@item nnimap-server-port
+@vindex nnimap-server-port
+Port on server to contact. Defaults to port 143, or 993 for @acronym{TLS}/@acronym{SSL}.
-In addition to this regexp detailing component groups, an @code{nnkiboze} group
-must have a score file to say what articles are to be included in
-the group (@pxref{Scoring}).
+Note that this should be an integer, example server specification:
-@kindex M-x nnkiboze-generate-groups
-@findex nnkiboze-generate-groups
-You must run @kbd{M-x nnkiboze-generate-groups} after creating the
-@code{nnkiboze} groups you want to have. This command will take time. Lots of
-time. Oodles and oodles of time. Gnus has to fetch the headers from
-all the articles in all the component groups and run them through the
-scoring process to determine if there are any articles in the groups
-that are to be part of the @code{nnkiboze} groups.
+@lisp
+(nnimap "mail.server.com"
+ (nnimap-server-port 4711))
+@end lisp
-Please limit the number of component groups by using restrictive
-regexps. Otherwise your sysadmin may become annoyed with you, and the
-@sc{nntp} site may throw you off and never let you back in again.
-Stranger things have happened.
+@item nnimap-list-pattern
+@vindex nnimap-list-pattern
+String or list of strings of mailboxes to limit available groups to.
+This is used when the server has very many mailboxes and you're only
+interested in a few---some servers export your home directory via
+@acronym{IMAP}, you'll probably want to limit the mailboxes to those in
+@file{~/Mail/*} then.
-@code{nnkiboze} component groups do not have to be alive---they can be dead,
-and they can be foreign. No restrictions.
+The string can also be a cons of REFERENCE and the string as above, what
+REFERENCE is used for is server specific, but on the University of
+Washington server it's a directory that will be concatenated with the
+mailbox.
-@vindex nnkiboze-directory
-The generation of an @code{nnkiboze} group means writing two files in
-@code{nnkiboze-directory}, which is @file{~/News/} by default. One
-contains the @sc{nov} header lines for all the articles in the group,
-and the other is an additional @file{.newsrc} file to store information
-on what groups have been searched through to find component articles.
+Example server specification:
-Articles marked as read in the @code{nnkiboze} group will have
-their @sc{nov} lines removed from the @sc{nov} file.
+@lisp
+(nnimap "mail.server.com"
+ (nnimap-list-pattern ("INBOX" "Mail/*" "alt.sex.*"
+ ("~friend/Mail/" . "list/*"))))
+@end lisp
+@item nnimap-stream
+@vindex nnimap-stream
+The type of stream used to connect to your server. By default, nnimap
+will detect and automatically use all of the below, with the exception
+of @acronym{TLS}/@acronym{SSL}. (@acronym{IMAP} over
+@acronym{TLS}/@acronym{SSL} is being replaced by STARTTLS, which can
+be automatically detected, but it's not widely deployed yet.)
-@node Gnus Unplugged
-@section Gnus Unplugged
-@cindex offline
-@cindex unplugged
-@cindex Agent
-@cindex Gnus Agent
-@cindex Gnus Unplugged
+Example server specification:
-In olden times (ca. February '88), people used to run their newsreaders
-on big machines with permanent connections to the net. News transport
-was dealt with by news servers, and all the newsreaders had to do was to
-read news. Believe it or not.
+@lisp
+(nnimap "mail.server.com"
+ (nnimap-stream ssl))
+@end lisp
-Nowadays most people read news and mail at home, and use some sort of
-modem to connect to the net. To avoid running up huge phone bills, it
-would be nice to have a way to slurp down all the news and mail, hang up
-the phone, read for several hours, and then upload any responses you
-have to make. And then you repeat the procedure.
-
-Of course, you can use news servers for doing this as well. I've used
-@code{inn} together with @code{slurp}, @code{pop} and @code{sendmail}
-for some years, but doing that's a bore. Moving the news server
-functionality up to the newsreader makes sense if you're the only person
-reading news on a machine.
-
-Using Gnus as an ``offline'' newsreader is quite simple.
+Please note that the value of @code{nnimap-stream} is a symbol!
@itemize @bullet
@item
-First, set up Gnus as you would do if you were running it on a machine
-that has full connection to the net. Go ahead. I'll still be waiting
-here.
-
+@dfn{gssapi:} Connect with GSSAPI (usually Kerberos 5). Requires the
+@samp{gsasl} or @samp{imtest} program.
+@item
+@dfn{kerberos4:} Connect with Kerberos 4. Requires the @samp{imtest} program.
+@item
+@dfn{starttls:} Connect via the STARTTLS extension (similar to
+@acronym{TLS}/@acronym{SSL}). Requires the external library @samp{starttls.el} and program
+@samp{starttls}.
@item
-Then, put the following magical incantation at the end of your
-@file{.gnus.el} file:
+@dfn{tls:} Connect through @acronym{TLS}. Requires GNUTLS (the program
+@samp{gnutls-cli}).
+@item
+@dfn{ssl:} Connect through @acronym{SSL}. Requires OpenSSL (the program
+@samp{openssl}) or SSLeay (@samp{s_client}).
+@item
+@dfn{shell:} Use a shell command to start @acronym{IMAP} connection.
+@item
+@dfn{network:} Plain, TCP/IP network connection.
+@end itemize
+
+@vindex imap-kerberos4-program
+The @samp{imtest} program is shipped with Cyrus IMAPD. If you're
+using @samp{imtest} from Cyrus IMAPD < 2.0.14 (which includes version
+1.5.x and 1.6.x) you need to frob @code{imap-process-connection-type}
+to make @code{imap.el} use a pty instead of a pipe when communicating
+with @samp{imtest}. You will then suffer from a line length
+restrictions on @acronym{IMAP} commands, which might make Gnus seem to hang
+indefinitely if you have many articles in a mailbox. The variable
+@code{imap-kerberos4-program} contain parameters to pass to the imtest
+program.
+
+For @acronym{TLS} connection, the @code{gnutls-cli} program from GNUTLS is
+needed. It is available from
+@uref{http://www.gnu.org/software/gnutls/}.
+
+@vindex imap-gssapi-program
+This parameter specifies a list of command lines that invoke a GSSAPI
+authenticated @acronym{IMAP} stream in a subshell. They are tried
+sequentially until a connection is made, or the list has been
+exhausted. By default, @samp{gsasl} from GNU SASL, available from
+@uref{http://www.gnu.org/software/gsasl/}, and the @samp{imtest}
+program from Cyrus IMAPD (see @code{imap-kerberos4-program}), are
+tried.
+
+@vindex imap-ssl-program
+For @acronym{SSL} connections, the OpenSSL program is available from
+@uref{http://www.openssl.org/}. OpenSSL was formerly known as SSLeay,
+and nnimap support it too---although the most recent versions of
+SSLeay, 0.9.x, are known to have serious bugs making it
+useless. Earlier versions, especially 0.8.x, of SSLeay are known to
+work. The variable @code{imap-ssl-program} contain parameters to pass
+to OpenSSL/SSLeay.
+
+@vindex imap-shell-program
+@vindex imap-shell-host
+For @acronym{IMAP} connections using the @code{shell} stream, the variable
+@code{imap-shell-program} specify what program to call.
+
+@item nnimap-authenticator
+@vindex nnimap-authenticator
+
+The authenticator used to connect to the server. By default, nnimap
+will use the most secure authenticator your server is capable of.
+
+Example server specification:
@lisp
-(gnus-agentize)
+(nnimap "mail.server.com"
+ (nnimap-authenticator anonymous))
@end lisp
+
+Please note that the value of @code{nnimap-authenticator} is a symbol!
+
+@itemize @bullet
+@item
+@dfn{gssapi:} GSSAPI (usually kerberos 5) authentication. Requires
+external program @code{gsasl} or @code{imtest}.
+@item
+@dfn{kerberos4:} Kerberos 4 authentication. Requires external program
+@code{imtest}.
+@item
+@dfn{digest-md5:} Encrypted username/password via DIGEST-MD5. Requires
+external library @code{digest-md5.el}.
+@item
+@dfn{cram-md5:} Encrypted username/password via CRAM-MD5.
+@item
+@dfn{login:} Plain-text username/password via LOGIN.
+@item
+@dfn{anonymous:} Login as ``anonymous'', supplying your email address as password.
@end itemize
-That's it. Gnus is now an ``offline'' newsreader.
+@item nnimap-expunge-on-close
+@cindex expunging
+@vindex nnimap-expunge-on-close
+Unlike Parmenides the @acronym{IMAP} designers have decided things that
+don't exist actually do exist. More specifically, @acronym{IMAP} has
+this concept of marking articles @code{Deleted} which doesn't actually
+delete them, and this (marking them @code{Deleted}, that is) is what
+nnimap does when you delete an article in Gnus (with @kbd{B DEL} or
+similar).
+
+Since the articles aren't really removed when we mark them with the
+@code{Deleted} flag we'll need a way to actually delete them. Feel like
+running in circles yet?
+
+Traditionally, nnimap has removed all articles marked as @code{Deleted}
+when closing a mailbox but this is now configurable by this server
+variable.
-Of course, to use it as such, you have to learn a few new commands.
+The possible options are:
-@menu
-* Agent Basics:: How it all is supposed to work.
-* Agent Categories:: How to tell the Gnus Agent what to download.
-* Agent Commands:: New commands for all the buffers.
-* Agent Expiry:: How to make old articles go away.
-* Outgoing Messages:: What happens when you post/mail something?
-* Agent Variables:: Customizing is fun.
-* Example Setup:: An example @file{.gnus.el} file for offline people.
-* Batching Agents:: How to fetch news from a @code{cron} job.
-* Agent Caveats:: What you think it'll do and what it does.
-@end menu
+@table @code
+@item always
+The default behavior, delete all articles marked as ``Deleted'' when
+closing a mailbox.
+@item never
+Never actually delete articles. Currently there is no way of showing
+the articles marked for deletion in nnimap, but other @acronym{IMAP} clients
+may allow you to do this. If you ever want to run the EXPUNGE command
+manually, @xref{Expunging mailboxes}.
+@item ask
+When closing mailboxes, nnimap will ask if you wish to expunge deleted
+articles or not.
-@node Agent Basics
-@subsection Agent Basics
+@end table
-First, let's get some terminology out of the way.
+@item nnimap-importantize-dormant
+@vindex nnimap-importantize-dormant
-The Gnus Agent is said to be @dfn{unplugged} when you have severed the
-connection to the net (and notified the Agent that this is the case).
-When the connection to the net is up again (and Gnus knows this), the
-Agent is @dfn{plugged}.
+If non-@code{nil} (the default), marks dormant articles as ticked (as
+well), for other @acronym{IMAP} clients. Within Gnus, dormant articles will
+naturally still (only) be marked as dormant. This is to make dormant
+articles stand out, just like ticked articles, in other @acronym{IMAP}
+clients. (In other words, Gnus has two ``Tick'' marks and @acronym{IMAP}
+has only one.)
-The @dfn{local} machine is the one you're running on, and which isn't
-connected to the net continuously.
+Probably the only reason for frobing this would be if you're trying
+enable per-user persistent dormant flags, using something like:
-@dfn{Downloading} means fetching things from the net to your local
-machine. @dfn{Uploading} is doing the opposite.
+@lisp
+(setcdr (assq 'dormant nnimap-mark-to-flag-alist)
+ (format "gnus-dormant-%s" (user-login-name)))
+(setcdr (assq 'dormant nnimap-mark-to-predicate-alist)
+ (format "KEYWORD gnus-dormant-%s" (user-login-name)))
+@end lisp
-Let's take a typical Gnus session using the Agent.
+In this case, you would not want the per-user dormant flag showing up
+as ticked for other users.
-@itemize @bullet
+@item nnimap-expunge-search-string
+@cindex expunging
+@vindex nnimap-expunge-search-string
-@item
-You start Gnus with @code{gnus-unplugged}. This brings up the Gnus
-Agent in a disconnected state. You can read all the news that you have
-already fetched while in this mode.
+This variable contain the @acronym{IMAP} search command sent to server when
+searching for articles eligible for expiring. The default is
+@code{"UID %s NOT SINCE %s"}, where the first @code{%s} is replaced by
+UID set and the second @code{%s} is replaced by a date.
-@item
-You then decide to see whether any new news has arrived. You connect
-your machine to the net (using PPP or whatever), and then hit @kbd{J j}
-to make Gnus become @dfn{plugged}.
+Probably the only useful value to change this to is
+@code{"UID %s NOT SENTSINCE %s"}, which makes nnimap use the Date: in
+messages instead of the internal article date. See section 6.4.4 of
+RFC 2060 for more information on valid strings.
-@item
-You can then read the new news immediately, or you can download the news
-onto your local machine. If you want to do the latter, you press @kbd{J
-s} to fetch all the eligible articles in all the groups. (To let Gnus
-know which articles you want to download, @pxref{Agent Categories}.)
+@item nnimap-authinfo-file
+@vindex nnimap-authinfo-file
-@item
-After fetching the articles, you press @kbd{J j} to make Gnus become
-unplugged again, and you shut down the PPP thing (or whatever). And
-then you read the news offline.
+A file containing credentials used to log in on servers. The format is
+(almost) the same as the @code{ftp} @file{~/.netrc} file. See the
+variable @code{nntp-authinfo-file} for exact syntax; also see
+@ref{NNTP}.
-@item
-And then you go to step 2.
-@end itemize
+@item nnimap-need-unselect-to-notice-new-mail
+@vindex nnimap-need-unselect-to-notice-new-mail
-Here are some things you should do the first time (or so) that you use
-the Agent.
+Unselect mailboxes before looking for new mail in them. Some servers
+seem to need this under some circumstances; it was reported that
+Courier 1.7.1 did.
-@itemize @bullet
+@end table
-@item
-Decide which servers should be covered by the Agent. If you have a mail
-backend, it would probably be nonsensical to have it covered by the
-Agent. Go to the server buffer (@kbd{^} in the group buffer) and press
-@kbd{J a} the server (or servers) that you wish to have covered by the
-Agent (@pxref{Server Agent Commands}). This will typically be only the
-primary select method, which is listed on the bottom in the buffer.
+@menu
+* Splitting in IMAP:: Splitting mail with nnimap.
+* Expiring in IMAP:: Expiring mail with nnimap.
+* Editing IMAP ACLs:: Limiting/enabling other users access to a mailbox.
+* Expunging mailboxes:: Equivalent of a ``compress mailbox'' button.
+* A note on namespaces:: How to (not) use @acronym{IMAP} namespace in Gnus.
+* Debugging IMAP:: What to do when things don't work.
+@end menu
-@item
-Decide on download policy. @xref{Agent Categories}.
-@item
-Uhm... that's it.
-@end itemize
+@node Splitting in IMAP
+@subsection Splitting in IMAP
+@cindex splitting imap mail
-@node Agent Categories
-@subsection Agent Categories
+Splitting is something Gnus users have loved and used for years, and now
+the rest of the world is catching up. Yeah, dream on, not many
+@acronym{IMAP} servers have server side splitting and those that have
+splitting seem to use some non-standard protocol. This means that
+@acronym{IMAP} support for Gnus has to do its own splitting.
-One of the main reasons to integrate the news transport layer into the
-newsreader is to allow greater control over what articles to download.
-There's not much point in downloading huge amounts of articles, just to
-find out that you're not interested in reading any of them. It's better
-to be somewhat more conservative in choosing what to download, and then
-mark the articles for downloading manually if it should turn out that
-you're interested in the articles anyway.
+And it does.
-The main way to control what is to be downloaded is to create a
-@dfn{category} and then assign some (or all) groups to this category.
-Gnus has its own buffer for creating and managing categories.
+(Incidentally, people seem to have been dreaming on, and Sieve has
+gaining a market share and is supported by several IMAP servers.
+Fortunately, Gnus support it too, @xref{Sieve Commands}.)
-@menu
-* Category Syntax:: What a category looks like.
-* The Category Buffer:: A buffer for maintaining categories.
-* Category Variables:: Customize'r'Us.
-@end menu
+Here are the variables of interest:
+@table @code
-@node Category Syntax
-@subsubsection Category Syntax
+@item nnimap-split-crosspost
+@cindex splitting, crosspost
+@cindex crosspost
+@vindex nnimap-split-crosspost
-A category consists of two things.
+If non-@code{nil}, do crossposting if several split methods match the
+mail. If @code{nil}, the first match in @code{nnimap-split-rule}
+found will be used.
-@enumerate
-@item
-A predicate which (generally) gives a rough outline of which articles
-are eligible for downloading; and
+Nnmail equivalent: @code{nnmail-crosspost}.
-@item
-a score rule which (generally) gives you a finer granularity when
-deciding what articles to download. (Note that this @dfn{download
-score} is not necessarily related to normal scores.)
-@end enumerate
+@item nnimap-split-inbox
+@cindex splitting, inbox
+@cindex inbox
+@vindex nnimap-split-inbox
-A predicate in its simplest form can be a single predicate such as
-@code{true} or @code{false}. These two will download every available
-article or nothing respectively. In the case of these two special
-predicates an additional score rule is superfluous.
+A string or a list of strings that gives the name(s) of @acronym{IMAP}
+mailboxes to split from. Defaults to @code{nil}, which means that
+splitting is disabled!
-Predicates of @code{high} or @code{low} download articles in respect of
-their scores in relationship to @code{gnus-agent-high-score} and
-@code{gnus-agent-low-score} as descibed below.
+@lisp
+(setq nnimap-split-inbox
+ '("INBOX" ("~/friend/Mail" . "lists/*") "lists.imap"))
+@end lisp
-To gain even finer control of what is to be regarded eligible for
-download a predicate can consist of a number of predicates with logical
-operators sprinkled in between.
+No nnmail equivalent.
-Perhaps some examples are in order.
+@item nnimap-split-rule
+@cindex splitting, rules
+@vindex nnimap-split-rule
-Here's a simple predicate. (It's the default predicate, in fact, used
-for all groups that don't belong to any other category.)
+New mail found in @code{nnimap-split-inbox} will be split according to
+this variable.
+
+This variable contains a list of lists, where the first element in the
+sublist gives the name of the @acronym{IMAP} mailbox to move articles
+matching the regexp in the second element in the sublist. Got that?
+Neither did I, we need examples.
@lisp
-short
+(setq nnimap-split-rule
+ '(("INBOX.nnimap"
+ "^Sender: owner-nnimap@@vic20.globalcom.se")
+ ("INBOX.junk" "^Subject:.*MAKE MONEY")
+ ("INBOX.private" "")))
@end lisp
-Quite simple, eh? This predicate is true if and only if the article is
-short (for some value of ``short'').
+This will put all articles from the nnimap mailing list into mailbox
+INBOX.nnimap, all articles containing MAKE MONEY in the Subject: line
+into INBOX.junk and everything else in INBOX.private.
-Here's a more complex predicate:
+The first string may contain @samp{\\1} forms, like the ones used by
+replace-match to insert sub-expressions from the matched text. For
+instance:
@lisp
-(or high
- (and
- (not low)
- (not long)))
+("INBOX.lists.\\1" "^Sender: owner-\\([a-z-]+\\)@@")
@end lisp
-This means that an article should be downloaded if it has a high score,
-or if the score is not low and the article is not long. You get the
-drift.
-
-The available logical operators are @code{or}, @code{and} and
-@code{not}. (If you prefer, you can use the more ``C''-ish operators
-@samp{|}, @code{&} and @code{!} instead.)
+The first element can also be the symbol @code{junk} to indicate that
+matching messages should simply be deleted. Use with care.
-The following predicates are pre-defined, but if none of these fit what
-you want to do, you can write your own.
+The second element can also be a function. In that case, it will be
+called with the first element of the rule as the argument, in a buffer
+containing the headers of the article. It should return a
+non-@code{nil} value if it thinks that the mail belongs in that group.
-@table @code
-@item short
-True iff the article is shorter than @code{gnus-agent-short-article}
-lines; default 100.
+Nnmail users might recollect that the last regexp had to be empty to
+match all articles (like in the example above). This is not required in
+nnimap. Articles not matching any of the regexps will not be moved out
+of your inbox. (This might affect performance if you keep lots of
+unread articles in your inbox, since the splitting code would go over
+them every time you fetch new mail.)
-@item long
-True iff the article is longer than @code{gnus-agent-long-article}
-lines; default 200.
+These rules are processed from the beginning of the alist toward the
+end. The first rule to make a match will ``win'', unless you have
+crossposting enabled. In that case, all matching rules will ``win''.
-@item low
-True iff the article has a download score less than
-@code{gnus-agent-low-score}; default 0.
+This variable can also have a function as its value, the function will
+be called with the headers narrowed and should return a group where it
+thinks the article should be split to. See @code{nnimap-split-fancy}.
-@item high
-True iff the article has a download score greater than
-@code{gnus-agent-high-score}; default 0.
+The splitting code tries to create mailboxes if it needs to.
-@item spam
-True iff the Gnus Agent guesses that the article is spam. The
-heuristics may change over time, but at present it just computes a
-checksum and sees whether articles match.
+To allow for different split rules on different virtual servers, and
+even different split rules in different inboxes on the same server,
+the syntax of this variable have been extended along the lines of:
-@item true
-Always true.
+@lisp
+(setq nnimap-split-rule
+ '(("my1server" (".*" (("ding" "ding@@gnus.org")
+ ("junk" "From:.*Simon"))))
+ ("my2server" ("INBOX" nnimap-split-fancy))
+ ("my[34]server" (".*" (("private" "To:.*Simon")
+ ("junk" my-junk-func))))))
+@end lisp
-@item false
-Always false.
-@end table
+The virtual server name is in fact a regexp, so that the same rules
+may apply to several servers. In the example, the servers
+@code{my3server} and @code{my4server} both use the same rules.
+Similarly, the inbox string is also a regexp. The actual splitting
+rules are as before, either a function, or a list with group/regexp or
+group/function elements.
-If you want to create your own predicate function, here's what you have
-to know: The functions are called with no parameters, but the
-@code{gnus-headers} and @code{gnus-score} dynamic variables are bound to
-useful values.
+Nnmail equivalent: @code{nnmail-split-methods}.
-For example, you could decide that you don't want to download articles
-that were posted more than a certain number of days ago (e.g. posted
-more than @code{gnus-agent-expire-days} ago) you might write a function
-something along the lines of the following:
+@item nnimap-split-predicate
+@cindex splitting
+@vindex nnimap-split-predicate
-@lisp
-(defun my-article-old-p ()
- "Say whether an article is old."
- (< (time-to-day (date-to-time (mail-header-date gnus-headers)))
- (- (time-to-day (current-time)) gnus-agent-expire-days)))
-@end lisp
+Mail matching this predicate in @code{nnimap-split-inbox} will be
+split, it is a string and the default is @samp{UNSEEN UNDELETED}.
-with the predicate then defined as:
+This might be useful if you use another @acronym{IMAP} client to read mail in
+your inbox but would like Gnus to split all articles in the inbox
+regardless of readedness. Then you might change this to
+@samp{UNDELETED}.
-@lisp
-(not my-article-old-p)
-@end lisp
+@item nnimap-split-fancy
+@cindex splitting, fancy
+@findex nnimap-split-fancy
+@vindex nnimap-split-fancy
-or you could append your predicate to the predefined
-@code{gnus-category-predicate-alist} in your @file{~/.gnus.el} or
-wherever. (Note: this would have to be at a point *after*
-@code{gnus-agent} has been loaded via @code{(gnus-agentize)})
+It's possible to set @code{nnimap-split-rule} to
+@code{nnmail-split-fancy} if you want to use fancy
+splitting. @xref{Fancy Mail Splitting}.
-@lisp
-(defvar gnus-category-predicate-alist
- (append gnus-category-predicate-alist
- '((old . my-article-old-p))))
-@end lisp
+However, to be able to have different fancy split rules for nnmail and
+nnimap back ends you can set @code{nnimap-split-rule} to
+@code{nnimap-split-fancy} and define the nnimap specific fancy split
+rule in @code{nnimap-split-fancy}.
-and simply specify your predicate as:
+Example:
@lisp
-(not old)
+(setq nnimap-split-rule 'nnimap-split-fancy
+ nnimap-split-fancy ...)
@end lisp
-If/when using something like the above, be aware that there are many
-misconfigured systems/mailers out there and so an article's date is not
-always a reliable indication of when it was posted. Hell, some people
-just don't give a damm.
+Nnmail equivalent: @code{nnmail-split-fancy}.
+@item nnimap-split-download-body
+@findex nnimap-split-download-body
+@vindex nnimap-split-download-body
-The above predicates apply to *all* the groups which belong to the
-category. However, if you wish to have a specific predicate for an
-individual group within a category, or you're just too lazy to set up a
-new category, you can enter a group's individual predicate in it's group
-parameters like so:
+Set to non-@code{nil} to download entire articles during splitting.
+This is generally not required, and will slow things down
+considerably. You may need it if you want to use an advanced
+splitting function that analyses the body to split the article.
-@lisp
-(agent-predicate . short)
-@end lisp
+@end table
-This is the group parameter equivalent of the agent category
-default. Note that when specifying a single word predicate like this,
-the @code{agent-predicate} specification must be in dotted pair
-notation.
+@node Expiring in IMAP
+@subsection Expiring in IMAP
+@cindex expiring imap mail
+
+Even though @code{nnimap} is not a proper @code{nnmail} derived back
+end, it supports most features in regular expiring (@pxref{Expiring
+Mail}). Unlike splitting in @acronym{IMAP} (@pxref{Splitting in
+IMAP}) it does not clone the @code{nnmail} variables (i.e., creating
+@var{nnimap-expiry-wait}) but reuse the @code{nnmail} variables. What
+follows below are the variables used by the @code{nnimap} expiry
+process.
+
+A note on how the expire mark is stored on the @acronym{IMAP} server is
+appropriate here as well. The expire mark is translated into a
+@code{imap} client specific mark, @code{gnus-expire}, and stored on the
+message. This means that likely only Gnus will understand and treat
+the @code{gnus-expire} mark properly, although other clients may allow
+you to view client specific flags on the message. It also means that
+your server must support permanent storage of client specific flags on
+messages. Most do, fortunately.
-The equivalent of the longer example from above would be:
+@table @code
-@lisp
-(agent-predicate or high (and (not low) (not long)))
-@end lisp
+@item nnmail-expiry-wait
+@item nnmail-expiry-wait-function
-The outer parenthesis required in the category specification are not
-entered here as, not being in dotted pair notation, the value of the
-predicate is assumed to be a list.
+These variables are fully supported. The expire value can be a
+number, the symbol @code{immediate} or @code{never}.
+@item nnmail-expiry-target
-Now, the syntax of the download score is the same as the syntax of
-normal score files, except that all elements that require actually
-seeing the article itself are verboten. This means that only the
-following headers can be scored on: @code{Subject}, @code{From},
-@code{Date}, @code{Message-ID}, @code{References}, @code{Chars},
-@code{Lines}, and @code{Xref}.
+This variable is supported, and internally implemented by calling the
+@code{nnmail} functions that handle this. It contains an optimization
+that if the destination is a @acronym{IMAP} group on the same server, the
+article is copied instead of appended (that is, uploaded again).
-As with predicates, the specification of the @code{download score rule}
-to use in respect of a group can be in either the category definition if
-it's to be applicable to all groups in therein, or a group's parameters
-if it's to be specific to that group.
+@end table
-In both of these places the @code{download score rule} can take one of
-three forms:
+@node Editing IMAP ACLs
+@subsection Editing IMAP ACLs
+@cindex editing imap acls
+@cindex Access Control Lists
+@cindex Editing @acronym{IMAP} ACLs
+@kindex G l (Group)
+@findex gnus-group-nnimap-edit-acl
-@enumerate
-@item
-Score rule
+ACL stands for Access Control List. ACLs are used in @acronym{IMAP} for
+limiting (or enabling) other users access to your mail boxes. Not all
+@acronym{IMAP} servers support this, this function will give an error if it
+doesn't.
-This has the same syntax as a normal gnus score file except only a
-subset of scoring keywords are available as mentioned above.
+To edit an ACL for a mailbox, type @kbd{G l}
+(@code{gnus-group-edit-nnimap-acl}) and you'll be presented with an ACL
+editing window with detailed instructions.
-example:
+Some possible uses:
@itemize @bullet
@item
-Category specification
-
-@lisp
-(("from"
- ("Lars Ingebrigtsen" 1000000 nil s))
-("lines"
- (500 -100 nil <)))
-@end lisp
-
+Giving ``anyone'' the ``lrs'' rights (lookup, read, keep seen/unseen flags)
+on your mailing list mailboxes enables other users on the same server to
+follow the list without subscribing to it.
@item
-Group Parameter specification
+At least with the Cyrus server, you are required to give the user
+``anyone'' posting ("p") capabilities to have ``plussing'' work (that is,
+mail sent to user+mailbox@@domain ending up in the @acronym{IMAP} mailbox
+INBOX.mailbox).
+@end itemize
+
+@node Expunging mailboxes
+@subsection Expunging mailboxes
+@cindex expunging
+
+@cindex expunge
+@cindex manual expunging
+@kindex G x (Group)
+@findex gnus-group-nnimap-expunge
+
+If you're using the @code{never} setting of @code{nnimap-expunge-on-close},
+you may want the option of expunging all deleted articles in a mailbox
+manually. This is exactly what @kbd{G x} does.
+
+Currently there is no way of showing deleted articles, you can just
+delete them.
+
+@node A note on namespaces
+@subsection A note on namespaces
+@cindex IMAP namespace
+@cindex namespaces
+
+The @acronym{IMAP} protocol has a concept called namespaces, described
+by the following text in the RFC:
+
+@display
+5.1.2. Mailbox Namespace Naming Convention
+
+ By convention, the first hierarchical element of any mailbox name
+ which begins with "#" identifies the "namespace" of the remainder of
+ the name. This makes it possible to disambiguate between different
+ types of mailbox stores, each of which have their own namespaces.
+
+ For example, implementations which offer access to USENET
+ newsgroups MAY use the "#news" namespace to partition the USENET
+ newsgroup namespace from that of other mailboxes. Thus, the
+ comp.mail.misc newsgroup would have an mailbox name of
+ "#news.comp.mail.misc", and the name "comp.mail.misc" could refer
+ to a different object (e.g. a user's private mailbox).
+@end display
+
+While there is nothing in this text that warrants concern for the
+@acronym{IMAP} implementation in Gnus, some servers use namespace
+prefixes in a way that does not work with how Gnus uses mailbox names.
+
+Specifically, University of Washington's @acronym{IMAP} server uses
+mailbox names like @code{#driver.mbx/read-mail} which are valid only
+in the @sc{create} and @sc{append} commands. After the mailbox is
+created (or a messages is appended to a mailbox), it must be accessed
+without the namespace prefix, i.e. @code{read-mail}. Since Gnus do
+not make it possible for the user to guarantee that user entered
+mailbox names will only be used with the CREATE and APPEND commands,
+you should simply not use the namespace prefixed mailbox names in
+Gnus.
+
+See the UoW IMAPD documentation for the @code{#driver.*/} prefix
+for more information on how to use the prefixes. They are a power
+tool and should be used only if you are sure what the effects are.
+
+@node Debugging IMAP
+@subsection Debugging IMAP
+@cindex IMAP debugging
+@cindex protocol dump (IMAP)
+
+@acronym{IMAP} is a complex protocol, more so than @acronym{NNTP} or
+@acronym{POP3}. Implementation bugs are not unlikely, and we do our
+best to fix them right away. If you encounter odd behaviour, chances
+are that either the server or Gnus is buggy.
+
+If you are familiar with network protocols in general, you will
+probably be able to extract some clues from the protocol dump of the
+exchanges between Gnus and the server. Even if you are not familiar
+with network protocols, when you include the protocol dump in
+@acronym{IMAP}-related bug reports you are helping us with data
+critical to solving the problem. Therefore, we strongly encourage you
+to include the protocol dump when reporting IMAP bugs in Gnus.
+
+
+@vindex imap-log
+Because the protocol dump, when enabled, generates lots of data, it is
+disabled by default. You can enable it by setting @code{imap-log} as
+follows:
@lisp
-(agent-score ("from"
- ("Lars Ingebrigtsen" 1000000 nil s))
- ("lines"
- (500 -100 nil <)))
+(setq imap-log t)
@end lisp
-Again, note the omission of the outermost parenthesis here.
-@end itemize
+This instructs the @code{imap.el} package to log any exchanges with
+the server. The log is stored in the buffer @samp{*imap-log*}. Look
+for error messages, which sometimes are tagged with the keyword
+@code{BAD}---but when submitting a bug, make sure to include all the
+data.
-@item
-Agent score file
+@node Other Sources
+@section Other Sources
-These score files must *only* contain the permitted scoring keywords
-stated above.
+Gnus can do more than just read news or mail. The methods described
+below allow Gnus to view directories and files as if they were
+newsgroups.
-example:
+@menu
+* Directory Groups:: You can read a directory as if it was a newsgroup.
+* Anything Groups:: Dired? Who needs dired?
+* Document Groups:: Single files can be the basis of a group.
+* SOUP:: Reading @sc{soup} packets ``offline''.
+* Mail-To-News Gateways:: Posting articles via mail-to-news gateways.
+@end menu
-@itemize @bullet
-@item
-Category specification
-@lisp
-("~/News/agent.SCORE")
-@end lisp
+@node Directory Groups
+@subsection Directory Groups
+@cindex nndir
+@cindex directory groups
-or perhaps
+If you have a directory that has lots of articles in separate files in
+it, you might treat it as a newsgroup. The files have to have numerical
+names, of course.
-@lisp
-("~/News/agent.SCORE" "~/News/agent.group.SCORE")
-@end lisp
+This might be an opportune moment to mention @code{ange-ftp} (and its
+successor @code{efs}), that most wonderful of all wonderful Emacs
+packages. When I wrote @code{nndir}, I didn't think much about it---a
+back end to read directories. Big deal.
-@item
-Group Parameter specification
+@code{ange-ftp} changes that picture dramatically. For instance, if you
+enter the @code{ange-ftp} file name
+@file{/ftp.hpc.uh.edu:/pub/emacs/ding-list/} as the directory name,
+@code{ange-ftp} or @code{efs} will actually allow you to read this
+directory over at @samp{sina} as a newsgroup. Distributed news ahoy!
-@lisp
-(agent-score "~/News/agent.SCORE")
-@end lisp
+@code{nndir} will use @acronym{NOV} files if they are present.
-Additional score files can be specified as above. Need I say anything
-about parenthesis.
-@end itemize
+@code{nndir} is a ``read-only'' back end---you can't delete or expire
+articles with this method. You can use @code{nnmh} or @code{nnml} for
+whatever you use @code{nndir} for, so you could switch to any of those
+methods if you feel the need to have a non-read-only @code{nndir}.
-@item
-Use @code{normal} score files
-If you dont want to maintain two sets of scoring rules for a group, and
-your desired @code{downloading} criteria for a group are the same as your
-@code{reading} criteria then you can tell the agent to refer to your
-@code{normal} score files when deciding what to download.
+@node Anything Groups
+@subsection Anything Groups
+@cindex nneething
-These directives in either the category definition or a group's
-parameters will cause the agent to read in all the applicable score
-files for a group, *filtering out* those those sections that do not
-relate to one of the permitted subset of scoring keywords.
+From the @code{nndir} back end (which reads a single spool-like
+directory), it's just a hop and a skip to @code{nneething}, which
+pretends that any arbitrary directory is a newsgroup. Strange, but
+true.
-@itemize @bullet
-@item
-Category Specification
+When @code{nneething} is presented with a directory, it will scan this
+directory and assign article numbers to each file. When you enter such
+a group, @code{nneething} must create ``headers'' that Gnus can use.
+After all, Gnus is a newsreader, in case you're forgetting.
+@code{nneething} does this in a two-step process. First, it snoops each
+file in question. If the file looks like an article (i.e., the first
+few lines look like headers), it will use this as the head. If this is
+just some arbitrary file without a head (e.g. a C source file),
+@code{nneething} will cobble up a header out of thin air. It will use
+file ownership, name and date and do whatever it can with these
+elements.
-@lisp
-file
-@end lisp
+All this should happen automatically for you, and you will be presented
+with something that looks very much like a newsgroup. Totally like a
+newsgroup, to be precise. If you select an article, it will be displayed
+in the article buffer, just as usual.
-@item
-Group Parameter specification
+If you select a line that represents a directory, Gnus will pop you into
+a new summary buffer for this @code{nneething} group. And so on. You can
+traverse the entire disk this way, if you feel like, but remember that
+Gnus is not dired, really, and does not intend to be, either.
-@lisp
-(agent-score . file)
-@end lisp
-@end itemize
-@end enumerate
+There are two overall modes to this action---ephemeral or solid. When
+doing the ephemeral thing (i.e., @kbd{G D} from the group buffer), Gnus
+will not store information on what files you have read, and what files
+are new, and so on. If you create a solid @code{nneething} group the
+normal way with @kbd{G m}, Gnus will store a mapping table between
+article numbers and file names, and you can treat this group like any
+other groups. When you activate a solid @code{nneething} group, you will
+be told how many unread articles it contains, etc., etc.
-@node The Category Buffer
-@subsubsection The Category Buffer
+Some variables:
-You'd normally do all category maintenance from the category buffer.
-When you enter it for the first time (with the @kbd{J c} command from
-the group buffer), you'll only see the @code{default} category.
+@table @code
+@item nneething-map-file-directory
+@vindex nneething-map-file-directory
+All the mapping files for solid @code{nneething} groups will be stored
+in this directory, which defaults to @file{~/.nneething/}.
-The following commands are available in this buffer:
+@item nneething-exclude-files
+@vindex nneething-exclude-files
+All files that match this regexp will be ignored. Nice to use to exclude
+auto-save files and the like, which is what it does by default.
-@table @kbd
-@item q
-@kindex q (Category)
-@findex gnus-category-exit
-Return to the group buffer (@code{gnus-category-exit}).
+@item nneething-include-files
+@vindex nneething-include-files
+Regexp saying what files to include in the group. If this variable is
+non-@code{nil}, only files matching this regexp will be included.
-@item k
-@kindex k (Category)
-@findex gnus-category-kill
-Kill the current category (@code{gnus-category-kill}).
+@item nneething-map-file
+@vindex nneething-map-file
+Name of the map files.
+@end table
-@item c
-@kindex c (Category)
-@findex gnus-category-copy
-Copy the current category (@code{gnus-category-copy}).
-@item a
-@kindex a (Category)
-@findex gnus-category-add
-Add a new category (@code{gnus-category-add}).
+@node Document Groups
+@subsection Document Groups
+@cindex nndoc
+@cindex documentation group
+@cindex help group
-@item p
-@kindex p (Category)
-@findex gnus-category-edit-predicate
-Edit the predicate of the current category
-(@code{gnus-category-edit-predicate}).
+@code{nndoc} is a cute little thing that will let you read a single file
+as a newsgroup. Several files types are supported:
-@item g
-@kindex g (Category)
-@findex gnus-category-edit-groups
-Edit the list of groups belonging to the current category
-(@code{gnus-category-edit-groups}).
+@table @code
+@cindex Babyl
+@cindex Rmail mbox
-@item s
-@kindex s (Category)
-@findex gnus-category-edit-score
-Edit the download score rule of the current category
-(@code{gnus-category-edit-score}).
+@item babyl
+The Babyl (Rmail) mail box.
+@cindex mbox
+@cindex Unix mbox
-@item l
-@kindex l (Category)
-@findex gnus-category-list
-List all the categories (@code{gnus-category-list}).
-@end table
+@item mbox
+The standard Unix mbox file.
+@cindex MMDF mail box
+@item mmdf
+The MMDF mail box format.
-@node Category Variables
-@subsubsection Category Variables
+@item news
+Several news articles appended into a file.
-@table @code
-@item gnus-category-mode-hook
-@vindex gnus-category-mode-hook
-Hook run in category buffers.
+@item rnews
+@cindex rnews batch files
+The rnews batch transport format.
+@cindex forwarded messages
-@item gnus-category-line-format
-@vindex gnus-category-line-format
-Format of the lines in the category buffer (@pxref{Formatting
-Variables}). Valid elements are:
+@item forward
+Forwarded articles.
-@table @samp
-@item c
-The name of the category.
+@item nsmail
+Netscape mail boxes.
-@item g
-The number of groups in the category.
-@end table
+@item mime-parts
+@acronym{MIME} multipart messages.
-@item gnus-category-mode-line-format
-@vindex gnus-category-mode-line-format
-Format of the category mode line (@pxref{Mode Line Formatting}).
+@item standard-digest
+The standard (RFC 1153) digest format.
-@item gnus-agent-short-article
-@vindex gnus-agent-short-article
-Articles that have fewer lines than this are short. Default 100.
+@item mime-digest
+A @acronym{MIME} digest of messages.
-@item gnus-agent-long-article
-@vindex gnus-agent-long-article
-Articles that have more lines than this are long. Default 200.
+@item lanl-gov-announce
+Announcement messages from LANL Gov Announce.
-@item gnus-agent-low-score
-@vindex gnus-agent-low-score
-Articles that have a score lower than this have a low score. Default
-0.
+@item rfc822-forward
+A message forwarded according to RFC822.
-@item gnus-agent-high-score
-@vindex gnus-agent-high-score
-Articles that have a score higher than this have a high score. Default
-0.
+@item outlook
+The Outlook mail box.
-@end table
+@item oe-dbx
+The Outlook Express dbx mail box.
+@item exim-bounce
+A bounce message from the Exim MTA.
-@node Agent Commands
-@subsection Agent Commands
+@item forward
+A message forwarded according to informal rules.
-All the Gnus Agent commands are on the @kbd{J} submap. The @kbd{J j}
-(@code{gnus-agent-toggle-plugged} command works in all modes, and
-toggles the plugged/unplugged state of the Gnus Agent.
+@item rfc934
+An RFC934-forwarded message.
+@item mailman
+A mailman digest.
-@menu
-* Group Agent Commands::
-* Summary Agent Commands::
-* Server Agent Commands::
-@end menu
+@item clari-briefs
+A digest of Clarinet brief news items.
-You can run a complete batch fetch from the command line with the
-following incantation:
+@item slack-digest
+Non-standard digest format---matches most things, but does it badly.
-@cindex gnus-agent-batch-fetch
-@example
-$ emacs -batch -l ~/.gnus.el -f gnus-agent-batch-fetch
-@end example
+@item mail-in-mail
+The last resort.
+@end table
+You can also use the special ``file type'' @code{guess}, which means
+that @code{nndoc} will try to guess what file type it is looking at.
+@code{digest} means that @code{nndoc} should guess what digest type the
+file is.
+@code{nndoc} will not try to change the file or insert any extra headers into
+it---it will simply, like, let you use the file as the basis for a
+group. And that's it.
-@node Group Agent Commands
-@subsubsection Group Agent Commands
+If you have some old archived articles that you want to insert into your
+new & spiffy Gnus mail back end, @code{nndoc} can probably help you with
+that. Say you have an old @file{RMAIL} file with mail that you now want
+to split into your new @code{nnml} groups. You look at that file using
+@code{nndoc} (using the @kbd{G f} command in the group buffer
+(@pxref{Foreign Groups})), set the process mark on all the articles in
+the buffer (@kbd{M P b}, for instance), and then re-spool (@kbd{B r})
+using @code{nnml}. If all goes well, all the mail in the @file{RMAIL}
+file is now also stored in lots of @code{nnml} directories, and you can
+delete that pesky @file{RMAIL} file. If you have the guts!
-@table @kbd
-@item J u
-@kindex J u (Agent Group)
-@findex gnus-agent-fetch-groups
-Fetch all eligible articles in the current group
-(@code{gnus-agent-fetch-groups}).
+Virtual server variables:
-@item J c
-@kindex J c (Agent Group)
-@findex gnus-enter-category-buffer
-Enter the Agent category buffer (@code{gnus-enter-category-buffer}).
+@table @code
+@item nndoc-article-type
+@vindex nndoc-article-type
+This should be one of @code{mbox}, @code{babyl}, @code{digest},
+@code{news}, @code{rnews}, @code{mmdf}, @code{forward}, @code{rfc934},
+@code{rfc822-forward}, @code{mime-parts}, @code{standard-digest},
+@code{slack-digest}, @code{clari-briefs}, @code{nsmail}, @code{outlook},
+@code{oe-dbx}, @code{mailman}, and @code{mail-in-mail} or @code{guess}.
-@item J s
-@kindex J s (Agent Group)
-@findex gnus-agent-fetch-session
-Fetch all eligible articles in all groups
-(@code{gnus-agent-fetch-session}).
+@item nndoc-post-type
+@vindex nndoc-post-type
+This variable says whether Gnus is to consider the group a news group or
+a mail group. There are two valid values: @code{mail} (the default)
+and @code{news}.
+@end table
-@item J S
-@kindex J S (Agent Group)
-@findex gnus-group-send-drafts
-Send all sendable messages in the draft group
-(@code{gnus-agent-fetch-session}). @xref{Drafts}.
+@menu
+* Document Server Internals:: How to add your own document types.
+@end menu
-@item J a
-@kindex J a (Agent Group)
-@findex gnus-agent-add-group
-Add the current group to an Agent category
-(@code{gnus-agent-add-group}). This command understands the
-process/prefix convention (@pxref{Process/Prefix}).
-@item J r
-@kindex J r (Agent Group)
-@findex gnus-agent-remove-group
-Remove the current group from its category, if any
-(@code{gnus-agent-remove-group}). This command understands the
-process/prefix convention (@pxref{Process/Prefix}).
+@node Document Server Internals
+@subsubsection Document Server Internals
-@end table
+Adding new document types to be recognized by @code{nndoc} isn't
+difficult. You just have to whip up a definition of what the document
+looks like, write a predicate function to recognize that document type,
+and then hook into @code{nndoc}.
+First, here's an example document type definition:
-@node Summary Agent Commands
-@subsubsection Summary Agent Commands
+@example
+(mmdf
+ (article-begin . "^\^A\^A\^A\^A\n")
+ (body-end . "^\^A\^A\^A\^A\n"))
+@end example
-@table @kbd
-@item J #
-@kindex J # (Agent Summary)
-@findex gnus-agent-mark-article
-Mark the article for downloading (@code{gnus-agent-mark-article}).
+The definition is simply a unique @dfn{name} followed by a series of
+regexp pseudo-variable settings. Below are the possible
+variables---don't be daunted by the number of variables; most document
+types can be defined with very few settings:
-@item J M-#
-@kindex J M-# (Agent Summary)
-@findex gnus-agent-unmark-article
-Remove the downloading mark from the article
-(@code{gnus-agent-unmark-article}).
+@table @code
+@item first-article
+If present, @code{nndoc} will skip past all text until it finds
+something that match this regexp. All text before this will be
+totally ignored.
-@item @@
-@kindex @@ (Agent Summary)
-@findex gnus-agent-toggle-mark
-Toggle whether to download the article (@code{gnus-agent-toggle-mark}).
+@item article-begin
+This setting has to be present in all document type definitions. It
+says what the beginning of each article looks like.
-@item J c
-@kindex J c (Agent Summary)
-@findex gnus-agent-catchup
-Mark all undownloaded articles as read (@code{gnus-agent-catchup}).
+@item head-begin-function
+If present, this should be a function that moves point to the head of
+the article.
-@end table
+@item nndoc-head-begin
+If present, this should be a regexp that matches the head of the
+article.
+@item nndoc-head-end
+This should match the end of the head of the article. It defaults to
+@samp{^$}---the empty line.
-@node Server Agent Commands
-@subsubsection Server Agent Commands
+@item body-begin-function
+If present, this function should move point to the beginning of the body
+of the article.
-@table @kbd
-@item J a
-@kindex J a (Agent Server)
-@findex gnus-agent-add-server
-Add the current server to the list of servers covered by the Gnus Agent
-(@code{gnus-agent-add-server}).
+@item body-begin
+This should match the beginning of the body of the article. It defaults
+to @samp{^\n}.
-@item J r
-@kindex J r (Agent Server)
-@findex gnus-agent-remove-server
-Remove the current server from the list of servers covered by the Gnus
-Agent (@code{gnus-agent-remove-server}).
+@item body-end-function
+If present, this function should move point to the end of the body of
+the article.
-@end table
+@item body-end
+If present, this should match the end of the body of the article.
+@item file-end
+If present, this should match the end of the file. All text after this
+regexp will be totally ignored.
-@node Agent Expiry
-@subsection Agent Expiry
+@end table
-@vindex gnus-agent-expire-days
-@findex gnus-agent-expire
-@kindex M-x gnus-agent-expire
-@cindex Agent expiry
-@cindex Gnus Agent expiry
-@cindex expiry
+So, using these variables @code{nndoc} is able to dissect a document
+file into a series of articles, each with a head and a body. However, a
+few more variables are needed since not all document types are all that
+news-like---variables needed to transform the head or the body into
+something that's palatable for Gnus:
-@code{nnagent} doesn't handle expiry. Instead, there's a special
-@code{gnus-agent-expire} command that will expire all read articles that
-are older than @code{gnus-agent-expire-days} days. It can be run
-whenever you feel that you're running out of space. It's not
-particularly fast or efficient, and it's not a particularly good idea to
-interrupt it (with @kbd{C-g} or anything else) once you've started it.
+@table @code
+@item prepare-body-function
+If present, this function will be called when requesting an article. It
+will be called with point at the start of the body, and is useful if the
+document has encoded some parts of its contents.
-@vindex gnus-agent-expire-all
-if @code{gnus-agent-expire-all} is non-@code{nil}, this command will
-expire all articles---unread, read, ticked and dormant. If @code{nil}
-(which is the default), only read articles are eligible for expiry, and
-unread, ticked and dormant articles will be kept indefinitely.
+@item article-transform-function
+If present, this function is called when requesting an article. It's
+meant to be used for more wide-ranging transformation of both head and
+body of the article.
+@item generate-head-function
+If present, this function is called to generate a head that Gnus can
+understand. It is called with the article number as a parameter, and is
+expected to generate a nice head for the article in question. It is
+called when requesting the headers of all articles.
-@node Outgoing Messages
-@subsection Outgoing Messages
+@end table
-When Gnus is unplugged, all outgoing messages (both mail and news) are
-stored in the draft groups (@pxref{Drafts}). You can view them there
-after posting, and edit them at will.
+Let's look at the most complicated example I can come up with---standard
+digests:
-When Gnus is plugged again, you can send the messages either from the
-draft group with the special commands available there, or you can use
-the @kbd{J S} command in the group buffer to send all the sendable
-messages in the draft group.
+@example
+(standard-digest
+ (first-article . ,(concat "^" (make-string 70 ?-) "\n\n+"))
+ (article-begin . ,(concat "\n\n" (make-string 30 ?-) "\n\n+"))
+ (prepare-body-function . nndoc-unquote-dashes)
+ (body-end-function . nndoc-digest-body-end)
+ (head-end . "^ ?$")
+ (body-begin . "^ ?\n")
+ (file-end . "^End of .*digest.*[0-9].*\n\\*\\*\\|^End of.*Digest *$")
+ (subtype digest guess))
+@end example
+We see that all text before a 70-width line of dashes is ignored; all
+text after a line that starts with that @samp{^End of} is also ignored;
+each article begins with a 30-width line of dashes; the line separating
+the head from the body may contain a single space; and that the body is
+run through @code{nndoc-unquote-dashes} before being delivered.
+To hook your own document definition into @code{nndoc}, use the
+@code{nndoc-add-type} function. It takes two parameters---the first
+is the definition itself and the second (optional) parameter says
+where in the document type definition alist to put this definition.
+The alist is traversed sequentially, and
+@code{nndoc-@var{type}-type-p} is called for a given type @var{type}.
+So @code{nndoc-mmdf-type-p} is called to see whether a document is of
+@code{mmdf} type, and so on. These type predicates should return
+@code{nil} if the document is not of the correct type; @code{t} if it
+is of the correct type; and a number if the document might be of the
+correct type. A high number means high probability; a low number
+means low probability with @samp{0} being the lowest valid number.
-@node Agent Variables
-@subsection Agent Variables
-@table @code
-@item gnus-agent-directory
-@vindex gnus-agent-directory
-Where the Gnus Agent will store its files. The default is
-@file{~/News/agent/}.
+@node SOUP
+@subsection SOUP
+@cindex SOUP
+@cindex offline
-@item gnus-agent-handle-level
-@vindex gnus-agent-handle-level
-Groups on levels (@pxref{Group Levels}) higher than this variable will
-be ignored by the Agent. The default is @code{gnus-level-subscribed},
-which means that only subscribed group will be considered by the Agent
-by default.
+In the PC world people often talk about ``offline'' newsreaders. These
+are thingies that are combined reader/news transport monstrosities.
+With built-in modem programs. Yecchh!
-@item gnus-agent-plugged-hook
-@vindex gnus-agent-plugged-hook
-Hook run when connecting to the network.
+Of course, us Unix Weenie types of human beans use things like
+@code{uucp} and, like, @code{nntpd} and set up proper news and mail
+transport things like Ghod intended. And then we just use normal
+newsreaders.
-@item gnus-agent-unplugged-hook
-@vindex gnus-agent-unplugged-hook
-Hook run when disconnecting from the network.
+However, it can sometimes be convenient to do something that's a bit
+easier on the brain if you have a very slow modem, and you're not really
+that interested in doing things properly.
-@end table
+A file format called @sc{soup} has been developed for transporting news
+and mail from servers to home machines and back again. It can be a bit
+fiddly.
+First some terminology:
-@node Example Setup
-@subsection Example Setup
+@table @dfn
-If you don't want to read this manual, and you have a fairly standard
-setup, you may be able to use something like the following as your
-@file{.gnus.el} file to get started.
+@item server
+This is the machine that is connected to the outside world and where you
+get news and/or mail from.
-@lisp
-;;; Define how Gnus is to fetch news. We do this over NNTP
-;;; from your ISP's server.
-(setq gnus-select-method '(nntp "nntp.your-isp.com"))
+@item home machine
+This is the machine that you want to do the actual reading and responding
+on. It is typically not connected to the rest of the world in any way.
-;;; Define how Gnus is to read your mail. We read mail from
-;;; your ISP's POP server.
-(setenv "MAILHOST" "pop.your-isp.com")
-(setq nnmail-spool-file "po:username")
+@item packet
+Something that contains messages and/or commands. There are two kinds
+of packets:
-;;; Say how Gnus is to store the mail. We use nnml groups.
-(setq gnus-secondary-select-methods '((nnml "")))
+@table @dfn
+@item message packets
+These are packets made at the server, and typically contain lots of
+messages for you to read. These are called @file{SoupoutX.tgz} by
+default, where @var{x} is a number.
-;;; Make Gnus into an offline newsreader.
-(gnus-agentize)
-@end lisp
+@item response packets
+These are packets made at the home machine, and typically contains
+replies that you've written. These are called @file{SoupinX.tgz} by
+default, where @var{x} is a number.
-That should be it, basically. Put that in your @file{~/.gnus.el} file,
-edit to suit your needs, start up PPP (or whatever), and type @kbd{M-x
-gnus}.
+@end table
-If this is the first time you've run Gnus, you will be subscribed
-automatically to a few default newsgroups. You'll probably want to
-subscribe to more groups, and to do that, you have to query the
-@sc{nntp} server for a complete list of groups with the @kbd{A A}
-command. This usually takes quite a while, but you only have to do it
-once.
+@end table
-After reading and parsing a while, you'll be presented with a list of
-groups. Subscribe to the ones you want to read with the @kbd{u}
-command. @kbd{l} to make all the killed groups disappear after you've
-subscribe to all the groups you want to read. (@kbd{A k} will bring
-back all the killed groups.)
-You can now read the groups at once, or you can download the articles
-with the @kbd{J s} command. And then read the rest of this manual to
-find out which of the other gazillion things you want to customize.
+@enumerate
+@item
+You log in on the server and create a @sc{soup} packet. You can either
+use a dedicated @sc{soup} thingie (like the @code{awk} program), or you
+can use Gnus to create the packet with its @sc{soup} commands (@kbd{O
+s} and/or @kbd{G s b}; and then @kbd{G s p}) (@pxref{SOUP Commands}).
-@node Batching Agents
-@subsection Batching Agents
+@item
+You transfer the packet home. Rail, boat, car or modem will do fine.
-Having the Gnus Agent fetch articles (and post whatever messages you've
-written) is quite easy once you've gotten things set up properly. The
-following shell script will do everything that is necessary:
+@item
+You put the packet in your home directory.
-@example
-#!/bin/sh
-emacs -batch -l ~/.emacs -f gnus-agent-batch >/dev/null
-@end example
+@item
+You fire up Gnus on your home machine using the @code{nnsoup} back end as
+the native or secondary server.
+@item
+You read articles and mail and answer and followup to the things you
+want (@pxref{SOUP Replies}).
-@node Agent Caveats
-@subsection Agent Caveats
+@item
+You do the @kbd{G s r} command to pack these replies into a @sc{soup}
+packet.
-The Gnus Agent doesn't seem to work like most other offline
-newsreaders. Here are some common questions that some imaginary people
-may ask:
+@item
+You transfer this packet to the server.
-@table @dfn
-@item If I read an article while plugged, do they get entered into the
-Agent?
+@item
+You use Gnus to mail this packet out with the @kbd{G s s} command.
-@strong{No.}
+@item
+You then repeat until you die.
-@item If I read an article while plugged, and the article already exists
-in the Agent, will it get downloaded once more?
+@end enumerate
-@strong{Yes.}
+So you basically have a bipartite system---you use @code{nnsoup} for
+reading and Gnus for packing/sending these @sc{soup} packets.
-@end table
+@menu
+* SOUP Commands:: Commands for creating and sending @sc{soup} packets
+* SOUP Groups:: A back end for reading @sc{soup} packets.
+* SOUP Replies:: How to enable @code{nnsoup} to take over mail and news.
+@end menu
-In short, when Gnus is unplugged, it only looks into the locally stored
-articles; when it's plugged, it only talks to your ISP.
+@node SOUP Commands
+@subsubsection SOUP Commands
-@node Scoring
-@chapter Scoring
-@cindex scoring
+These are commands for creating and manipulating @sc{soup} packets.
-Other people use @dfn{kill files}, but we here at Gnus Towers like
-scoring better than killing, so we'd rather switch than fight. They do
-something completely different as well, so sit up straight and pay
-attention!
+@table @kbd
+@item G s b
+@kindex G s b (Group)
+@findex gnus-group-brew-soup
+Pack all unread articles in the current group
+(@code{gnus-group-brew-soup}). This command understands the
+process/prefix convention.
-@vindex gnus-summary-mark-below
-All articles have a default score (@code{gnus-summary-default-score}),
-which is 0 by default. This score may be raised or lowered either
-interactively or by score files. Articles that have a score lower than
-@code{gnus-summary-mark-below} are marked as read.
+@item G s w
+@kindex G s w (Group)
+@findex gnus-soup-save-areas
+Save all @sc{soup} data files (@code{gnus-soup-save-areas}).
-Gnus will read any @dfn{score files} that apply to the current group
-before generating the summary buffer.
+@item G s s
+@kindex G s s (Group)
+@findex gnus-soup-send-replies
+Send all replies from the replies packet
+(@code{gnus-soup-send-replies}).
-There are several commands in the summary buffer that insert score
-entries based on the current article. You can, for instance, ask Gnus to
-lower or increase the score of all articles with a certain subject.
+@item G s p
+@kindex G s p (Group)
+@findex gnus-soup-pack-packet
+Pack all files into a @sc{soup} packet (@code{gnus-soup-pack-packet}).
-There are two sorts of scoring entries: Permanent and temporary.
-Temporary score entries are self-expiring entries. Any entries that are
-temporary and have not been used for, say, a week, will be removed
-silently to help keep the sizes of the score files down.
+@item G s r
+@kindex G s r (Group)
+@findex nnsoup-pack-replies
+Pack all replies into a replies packet (@code{nnsoup-pack-replies}).
-@menu
-* Summary Score Commands:: Adding score entries for the current group.
-* Group Score Commands:: General score commands.
-* Score Variables:: Customize your scoring. (My, what terminology).
-* Score File Format:: What a score file may contain.
-* Score File Editing:: You can edit score files by hand as well.
-* Adaptive Scoring:: Big Sister Gnus knows what you read.
-* Home Score File:: How to say where new score entries are to go.
-* Followups To Yourself:: Having Gnus notice when people answer you.
-* Scoring Tips:: How to score effectively.
-* Reverse Scoring:: That problem child of old is not problem.
-* Global Score Files:: Earth-spanning, ear-splitting score files.
-* Kill Files:: They are still here, but they can be ignored.
-* Converting Kill Files:: Translating kill files to score files.
-* GroupLens:: Getting predictions on what you like to read.
-* Advanced Scoring:: Using logical expressions to build score rules.
-* Score Decays:: It can be useful to let scores wither away.
-@end menu
+@item O s
+@kindex O s (Summary)
+@findex gnus-soup-add-article
+This summary-mode command adds the current article to a @sc{soup} packet
+(@code{gnus-soup-add-article}). It understands the process/prefix
+convention (@pxref{Process/Prefix}).
+@end table
-@node Summary Score Commands
-@section Summary Score Commands
-@cindex score commands
-The score commands that alter score entries do not actually modify real
-score files. That would be too inefficient. Gnus maintains a cache of
-previously loaded score files, one of which is considered the
-@dfn{current score file alist}. The score commands simply insert
-entries into this list, and upon group exit, this list is saved.
+There are a few variables to customize where Gnus will put all these
+thingies:
-The current score file is by default the group's local score file, even
-if no such score file actually exists. To insert score commands into
-some other score file (e.g. @file{all.SCORE}), you must first make this
-score file the current one.
+@table @code
-General score commands that don't actually change the score file:
+@item gnus-soup-directory
+@vindex gnus-soup-directory
+Directory where Gnus will save intermediate files while composing
+@sc{soup} packets. The default is @file{~/SoupBrew/}.
-@table @kbd
+@item gnus-soup-replies-directory
+@vindex gnus-soup-replies-directory
+This is what Gnus will use as a temporary directory while sending our
+reply packets. @file{~/SoupBrew/SoupReplies/} is the default.
-@item V s
-@kindex V s (Summary)
-@findex gnus-summary-set-score
-Set the score of the current article (@code{gnus-summary-set-score}).
+@item gnus-soup-prefix-file
+@vindex gnus-soup-prefix-file
+Name of the file where Gnus stores the last used prefix. The default is
+@samp{gnus-prefix}.
-@item V S
-@kindex V S (Summary)
-@findex gnus-summary-current-score
-Display the score of the current article
-(@code{gnus-summary-current-score}).
+@item gnus-soup-packer
+@vindex gnus-soup-packer
+A format string command for packing a @sc{soup} packet. The default is
+@samp{tar cf - %s | gzip > $HOME/Soupout%d.tgz}.
-@item V t
-@kindex V t (Summary)
-@findex gnus-score-find-trace
-Display all score rules that have been used on the current article
-(@code{gnus-score-find-trace}).
+@item gnus-soup-unpacker
+@vindex gnus-soup-unpacker
+Format string command for unpacking a @sc{soup} packet. The default is
+@samp{gunzip -c %s | tar xvf -}.
-@item V R
-@kindex V R (Summary)
-@findex gnus-summary-rescore
-Run the current summary through the scoring process
-(@code{gnus-summary-rescore}). This might be useful if you're playing
-around with your score files behind Gnus' back and want to see the
-effect you're having.
+@item gnus-soup-packet-directory
+@vindex gnus-soup-packet-directory
+Where Gnus will look for reply packets. The default is @file{~/}.
-@item V c
-@kindex V c (Summary)
-@findex gnus-score-change-score-file
-Make a different score file the current
-(@code{gnus-score-change-score-file}).
+@item gnus-soup-packet-regexp
+@vindex gnus-soup-packet-regexp
+Regular expression matching @sc{soup} reply packets in
+@code{gnus-soup-packet-directory}.
-@item V e
-@kindex V e (Summary)
-@findex gnus-score-edit-current-scores
-Edit the current score file (@code{gnus-score-edit-current-scores}).
-You will be popped into a @code{gnus-score-mode} buffer (@pxref{Score
-File Editing}).
+@end table
-@item V f
-@kindex V f (Summary)
-@findex gnus-score-edit-file
-Edit a score file and make this score file the current one
-(@code{gnus-score-edit-file}).
-@item V F
-@kindex V F (Summary)
-@findex gnus-score-flush-cache
-Flush the score cache (@code{gnus-score-flush-cache}). This is useful
-after editing score files.
+@node SOUP Groups
+@subsubsection SOUP Groups
+@cindex nnsoup
-@item V C
-@kindex V C (Summary)
-@findex gnus-score-customize
-Customize a score file in a visually pleasing manner
-(@code{gnus-score-customize}).
+@code{nnsoup} is the back end for reading @sc{soup} packets. It will
+read incoming packets, unpack them, and put them in a directory where
+you can read them at leisure.
-@end table
+These are the variables you can use to customize its behavior:
-The rest of these commands modify the local score file.
+@table @code
-@table @kbd
+@item nnsoup-tmp-directory
+@vindex nnsoup-tmp-directory
+When @code{nnsoup} unpacks a @sc{soup} packet, it does it in this
+directory. (@file{/tmp/} by default.)
-@item V m
-@kindex V m (Summary)
-@findex gnus-score-set-mark-below
-Prompt for a score, and mark all articles with a score below this as
-read (@code{gnus-score-set-mark-below}).
+@item nnsoup-directory
+@vindex nnsoup-directory
+@code{nnsoup} then moves each message and index file to this directory.
+The default is @file{~/SOUP/}.
-@item V x
-@kindex V x (Summary)
-@findex gnus-score-set-expunge-below
-Prompt for a score, and add a score rule to the current score file to
-expunge all articles below this score
-(@code{gnus-score-set-expunge-below}).
-@end table
+@item nnsoup-replies-directory
+@vindex nnsoup-replies-directory
+All replies will be stored in this directory before being packed into a
+reply packet. The default is @file{~/SOUP/replies/}.
-The keystrokes for actually making score entries follow a very regular
-pattern, so there's no need to list all the commands. (Hundreds of
-them.)
+@item nnsoup-replies-format-type
+@vindex nnsoup-replies-format-type
+The @sc{soup} format of the replies packets. The default is @samp{?n}
+(rnews), and I don't think you should touch that variable. I probably
+shouldn't even have documented it. Drats! Too late!
-@findex gnus-summary-increase-score
-@findex gnus-summary-lower-score
+@item nnsoup-replies-index-type
+@vindex nnsoup-replies-index-type
+The index type of the replies packet. The default is @samp{?n}, which
+means ``none''. Don't fiddle with this one either!
-@enumerate
-@item
-The first key is either @kbd{I} (upper case i) for increasing the score
-or @kbd{L} for lowering the score.
-@item
-The second key says what header you want to score on. The following
-keys are available:
-@table @kbd
+@item nnsoup-active-file
+@vindex nnsoup-active-file
+Where @code{nnsoup} stores lots of information. This is not an ``active
+file'' in the @code{nntp} sense; it's an Emacs Lisp file. If you lose
+this file or mess it up in any way, you're dead. The default is
+@file{~/SOUP/active}.
-@item a
-Score on the author name.
+@item nnsoup-packer
+@vindex nnsoup-packer
+Format string command for packing a reply @sc{soup} packet. The default
+is @samp{tar cf - %s | gzip > $HOME/Soupin%d.tgz}.
-@item s
-Score on the subject line.
+@item nnsoup-unpacker
+@vindex nnsoup-unpacker
+Format string command for unpacking incoming @sc{soup} packets. The
+default is @samp{gunzip -c %s | tar xvf -}.
-@item x
-Score on the Xref line---i.e., the cross-posting line.
+@item nnsoup-packet-directory
+@vindex nnsoup-packet-directory
+Where @code{nnsoup} will look for incoming packets. The default is
+@file{~/}.
-@item r
-Score on the References line.
+@item nnsoup-packet-regexp
+@vindex nnsoup-packet-regexp
+Regular expression matching incoming @sc{soup} packets. The default is
+@samp{Soupout}.
-@item d
-Score on the date.
+@item nnsoup-always-save
+@vindex nnsoup-always-save
+If non-@code{nil}, save the replies buffer after each posted message.
-@item l
-Score on the number of lines.
+@end table
-@item i
-Score on the Message-ID.
-@item f
-Score on followups.
+@node SOUP Replies
+@subsubsection SOUP Replies
-@item b
-Score on the body.
+Just using @code{nnsoup} won't mean that your postings and mailings end
+up in @sc{soup} reply packets automagically. You have to work a bit
+more for that to happen.
-@item h
-Score on the head.
+@findex nnsoup-set-variables
+The @code{nnsoup-set-variables} command will set the appropriate
+variables to ensure that all your followups and replies end up in the
+@sc{soup} system.
-@item t
-Score on thead.
+In specific, this is what it does:
-@end table
+@lisp
+(setq message-send-news-function 'nnsoup-request-post)
+(setq message-send-mail-function 'nnsoup-request-mail)
+@end lisp
-@item
-The third key is the match type. Which match types are valid depends on
-what headers you are scoring on.
+And that's it, really. If you only want news to go into the @sc{soup}
+system you just use the first line. If you only want mail to be
+@sc{soup}ed you use the second.
-@table @code
-@item strings
+@node Mail-To-News Gateways
+@subsection Mail-To-News Gateways
+@cindex mail-to-news gateways
+@cindex gateways
-@table @kbd
+If your local @code{nntp} server doesn't allow posting, for some reason
+or other, you can post using one of the numerous mail-to-news gateways.
+The @code{nngateway} back end provides the interface.
-@item e
-Exact matching.
+Note that you can't read anything from this back end---it can only be
+used to post with.
-@item s
-Substring matching.
+Server variables:
-@item f
-Fuzzy matching (@pxref{Fuzzy Matching}).
+@table @code
+@item nngateway-address
+@vindex nngateway-address
+This is the address of the mail-to-news gateway.
-@item r
-Regexp matching
-@end table
+@item nngateway-header-transformation
+@vindex nngateway-header-transformation
+News headers often have to be transformed in some odd way or other
+for the mail-to-news gateway to accept it. This variable says what
+transformation should be called, and defaults to
+@code{nngateway-simple-header-transformation}. The function is called
+narrowed to the headers to be transformed and with one parameter---the
+gateway address.
-@item date
-@table @kbd
+This default function just inserts a new @code{To} header based on the
+@code{Newsgroups} header and the gateway address.
+For instance, an article with this @code{Newsgroups} header:
-@item b
-Before date.
+@example
+Newsgroups: alt.religion.emacs
+@end example
-@item a
-After date.
+will get this @code{To} header inserted:
-@item n
-This date.
-@end table
+@example
+To: alt-religion-emacs@@GATEWAY
+@end example
-@item number
-@table @kbd
+The following pre-defined functions exist:
-@item <
-Less than number.
+@findex nngateway-simple-header-transformation
+@table @code
-@item =
-Equal to number.
+@item nngateway-simple-header-transformation
+Creates a @code{To} header that looks like
+@var{newsgroup}@@@code{nngateway-address}.
-@item >
-Greater than number.
+@findex nngateway-mail2news-header-transformation
+
+@item nngateway-mail2news-header-transformation
+Creates a @code{To} header that looks like
+@code{nngateway-address}.
@end table
+
@end table
-@item
-The fourth and final key says whether this is a temporary (i.e., expiring)
-score entry, or a permanent (i.e., non-expiring) score entry, or whether
-it is to be done immediately, without adding to the score file.
-@table @kbd
+Here's an example:
-@item t
-Temporary score entry.
+@lisp
+(setq gnus-post-method
+ '(nngateway
+ "mail2news@@replay.com"
+ (nngateway-header-transformation
+ nngateway-mail2news-header-transformation)))
+@end lisp
-@item p
-Permanent score entry.
+So, to use this, simply say something like:
-@item i
-Immediately scoring.
-@end table
+@lisp
+(setq gnus-post-method '(nngateway "GATEWAY.ADDRESS"))
+@end lisp
-@end enumerate
-So, let's say you want to increase the score on the current author with
-exact matching permanently: @kbd{I a e p}. If you want to lower the
-score based on the subject line, using substring matching, and make a
-temporary score entry: @kbd{L s s t}. Pretty easy.
-To make things a bit more complicated, there are shortcuts. If you use
-a capital letter on either the second or third keys, Gnus will use
-defaults for the remaining one or two keystrokes. The defaults are
-``substring'' and ``temporary''. So @kbd{I A} is the same as @kbd{I a s
-t}, and @kbd{I a R} is the same as @kbd{I a r t}.
+@node Combined Groups
+@section Combined Groups
-These functions take both the numerical prefix and the symbolic prefix
-(@pxref{Symbolic Prefixes}). A numerical prefix says how much to lower
-(or increase) the score of the article. A symbolic prefix of @code{a}
-says to use the @file{all.SCORE} file for the command instead of the
-current score file.
+Gnus allows combining a mixture of all the other group types into bigger
+groups.
-@vindex gnus-score-mimic-keymap
-The @code{gnus-score-mimic-keymap} says whether these commands will
-pretend they are keymaps or not.
+@menu
+* Virtual Groups:: Combining articles from many groups.
+* Kibozed Groups:: Looking through parts of the newsfeed for articles.
+@end menu
-@node Group Score Commands
-@section Group Score Commands
-@cindex group score commands
+@node Virtual Groups
+@subsection Virtual Groups
+@cindex nnvirtual
+@cindex virtual groups
+@cindex merging groups
-There aren't many of these as yet, I'm afraid.
+An @dfn{nnvirtual group} is really nothing more than a collection of
+other groups.
-@table @kbd
+For instance, if you are tired of reading many small groups, you can
+put them all in one big group, and then grow tired of reading one
+big, unwieldy group. The joys of computing!
-@item W f
-@kindex W f (Group)
-@findex gnus-score-flush-cache
-Gnus maintains a cache of score alists to avoid having to reload them
-all the time. This command will flush the cache
-(@code{gnus-score-flush-cache}).
+You specify @code{nnvirtual} as the method. The address should be a
+regexp to match component groups.
-@end table
+All marks in the virtual group will stick to the articles in the
+component groups. So if you tick an article in a virtual group, the
+article will also be ticked in the component group from whence it
+came. (And vice versa---marks from the component groups will also be
+shown in the virtual group.). To create an empty virtual group, run
+@kbd{G V} (@code{gnus-group-make-empty-virtual}) in the group buffer
+and edit the method regexp with @kbd{M-e}
+(@code{gnus-group-edit-group-method})
-You can do scoring from the command line by saying something like:
+Here's an example @code{nnvirtual} method that collects all Andrea Dworkin
+newsgroups into one, big, happy newsgroup:
+
+@lisp
+(nnvirtual "^alt\\.fan\\.andrea-dworkin$\\|^rec\\.dworkin.*")
+@end lisp
+
+The component groups can be native or foreign; everything should work
+smoothly, but if your computer explodes, it was probably my fault.
+
+Collecting the same group from several servers might actually be a good
+idea if users have set the Distribution header to limit distribution.
+If you would like to read @samp{soc.motss} both from a server in Japan
+and a server in Norway, you could use the following as the group regexp:
-@findex gnus-batch-score
-@cindex batch scoring
@example
-$ emacs -batch -l ~/.emacs -l ~/.gnus.el -f gnus-batch-score
+"^nntp\\+server\\.jp:soc\\.motss$\\|^nntp\\+server\\.no:soc\\.motss$"
@end example
+(Remember, though, that if you're creating the group with @kbd{G m}, you
+shouldn't double the backslashes, and you should leave off the quote
+characters at the beginning and the end of the string.)
-@node Score Variables
-@section Score Variables
-@cindex score variables
+This should work kinda smoothly---all articles from both groups should
+end up in this one, and there should be no duplicates. Threading (and
+the rest) will still work as usual, but there might be problems with the
+sequence of articles. Sorting on date might be an option here
+(@pxref{Selecting a Group}).
-@table @code
+One limitation, however---all groups included in a virtual
+group have to be alive (i.e., subscribed or unsubscribed). Killed or
+zombie groups can't be component groups for @code{nnvirtual} groups.
-@item gnus-use-scoring
-@vindex gnus-use-scoring
-If @code{nil}, Gnus will not check for score files, and will not, in
-general, do any score-related work. This is @code{t} by default.
+@vindex nnvirtual-always-rescan
+If the @code{nnvirtual-always-rescan} is non-@code{nil},
+@code{nnvirtual} will always scan groups for unread articles when
+entering a virtual group. If this variable is @code{nil} (which is the
+default) and you read articles in a component group after the virtual
+group has been activated, the read articles from the component group
+will show up when you enter the virtual group. You'll also see this
+effect if you have two virtual groups that have a component group in
+common. If that's the case, you should set this variable to @code{t}.
+Or you can just tap @code{M-g} on the virtual group every time before
+you enter it---it'll have much the same effect.
-@item gnus-kill-killed
-@vindex gnus-kill-killed
-If this variable is @code{nil}, Gnus will never apply score files to
-articles that have already been through the kill process. While this
-may save you lots of time, it also means that if you apply a kill file
-to a group, and then change the kill file and want to run it over you
-group again to kill more articles, it won't work. You have to set this
-variable to @code{t} to do that. (It is @code{t} by default.)
+@code{nnvirtual} can have both mail and news groups as component groups.
+When responding to articles in @code{nnvirtual} groups, @code{nnvirtual}
+has to ask the back end of the component group the article comes from
+whether it is a news or mail back end. However, when you do a @kbd{^},
+there is typically no sure way for the component back end to know this,
+and in that case @code{nnvirtual} tells Gnus that the article came from a
+not-news back end. (Just to be on the safe side.)
-@item gnus-kill-files-directory
-@vindex gnus-kill-files-directory
-All kill and score files will be stored in this directory, which is
-initialized from the @code{SAVEDIR} environment variable by default.
-This is @file{~/News/} by default.
+@kbd{C-c C-n} in the message buffer will insert the @code{Newsgroups}
+line from the article you respond to in these cases.
-@item gnus-score-file-suffix
-@vindex gnus-score-file-suffix
-Suffix to add to the group name to arrive at the score file name
-(@samp{SCORE} by default.)
+@code{nnvirtual} groups do not inherit anything but articles and marks
+from component groups---group parameters, for instance, are not
+inherited.
-@item gnus-score-uncacheable-files
-@vindex gnus-score-uncacheable-files
-@cindex score cache
-All score files are normally cached to avoid excessive re-loading of
-score files. However, if this might make you Emacs grow big and
-bloated, so this regexp can be used to weed out score files unlikely to be needed again. It would be a bad idea to deny caching of
-@file{all.SCORE}, while it might be a good idea to not cache
-@file{comp.infosystems.www.authoring.misc.ADAPT}. In fact, this
-variable is @samp{ADAPT$} by default, so no adaptive score files will
-be cached.
-@item gnus-save-score
-@vindex gnus-save-score
-If you have really complicated score files, and do lots of batch
-scoring, then you might set this variable to @code{t}. This will make
-Gnus save the scores into the @file{.newsrc.eld} file.
+@node Kibozed Groups
+@subsection Kibozed Groups
+@cindex nnkiboze
+@cindex kibozing
-@item gnus-score-interactive-default-score
-@vindex gnus-score-interactive-default-score
-Score used by all the interactive raise/lower commands to raise/lower
-score with. Default is 1000, which may seem excessive, but this is to
-ensure that the adaptive scoring scheme gets enough room to play with.
-We don't want the small changes from the adaptive scoring to overwrite
-manually entered data.
+@dfn{Kibozing} is defined by the @acronym{OED} as ``grepping through
+(parts of) the news feed''. @code{nnkiboze} is a back end that will
+do this for you. Oh joy! Now you can grind any @acronym{NNTP} server
+down to a halt with useless requests! Oh happiness!
-@item gnus-summary-default-score
-@vindex gnus-summary-default-score
-Default score of an article, which is 0 by default.
+@kindex G k (Group)
+To create a kibozed group, use the @kbd{G k} command in the group
+buffer.
-@item gnus-summary-expunge-below
-@vindex gnus-summary-expunge-below
-Don't display the summary lines of articles that have scores lower than
-this variable. This is @code{nil} by default, which means that no
-articles will be hidden. This variable is local to the summary buffers,
-and has to be set from @code{gnus-summary-mode-hook}.
+The address field of the @code{nnkiboze} method is, as with
+@code{nnvirtual}, a regexp to match groups to be ``included'' in the
+@code{nnkiboze} group. That's where most similarities between
+@code{nnkiboze} and @code{nnvirtual} end.
-@item gnus-score-over-mark
-@vindex gnus-score-over-mark
-Mark (in the third column) used for articles with a score over the
-default. Default is @samp{+}.
+In addition to this regexp detailing component groups, an
+@code{nnkiboze} group must have a score file to say what articles are
+to be included in the group (@pxref{Scoring}).
-@item gnus-score-below-mark
-@vindex gnus-score-below-mark
-Mark (in the third column) used for articles with a score below the
-default. Default is @samp{-}.
+@kindex M-x nnkiboze-generate-groups
+@findex nnkiboze-generate-groups
+You must run @kbd{M-x nnkiboze-generate-groups} after creating the
+@code{nnkiboze} groups you want to have. This command will take time.
+Lots of time. Oodles and oodles of time. Gnus has to fetch the
+headers from all the articles in all the component groups and run them
+through the scoring process to determine if there are any articles in
+the groups that are to be part of the @code{nnkiboze} groups.
-@item gnus-score-find-score-files-function
-@vindex gnus-score-find-score-files-function
-Function used to find score files for the current group. This function
-is called with the name of the group as the argument.
+Please limit the number of component groups by using restrictive
+regexps. Otherwise your sysadmin may become annoyed with you, and the
+@acronym{NNTP} site may throw you off and never let you back in again.
+Stranger things have happened.
-Predefined functions available are:
-@table @code
+@code{nnkiboze} component groups do not have to be alive---they can be dead,
+and they can be foreign. No restrictions.
-@item gnus-score-find-single
-@findex gnus-score-find-single
-Only apply the group's own score file.
+@vindex nnkiboze-directory
+The generation of an @code{nnkiboze} group means writing two files in
+@code{nnkiboze-directory}, which is @file{~/News/kiboze/} by default.
+One contains the @acronym{NOV} header lines for all the articles in
+the group, and the other is an additional @file{.newsrc} file to store
+information on what groups have been searched through to find
+component articles.
-@item gnus-score-find-bnews
-@findex gnus-score-find-bnews
-Apply all score files that match, using bnews syntax. This is the
-default. If the current group is @samp{gnu.emacs.gnus}, for instance,
-@file{all.emacs.all.SCORE}, @file{not.alt.all.SCORE} and
-@file{gnu.all.SCORE} would all apply. In short, the instances of
-@samp{all} in the score file names are translated into @samp{.*}, and
-then a regexp match is done.
+Articles marked as read in the @code{nnkiboze} group will have
+their @acronym{NOV} lines removed from the @acronym{NOV} file.
-This means that if you have some score entries that you want to apply to
-all groups, then you put those entries in the @file{all.SCORE} file.
-The score files are applied in a semi-random order, although Gnus will
-try to apply the more general score files before the more specific score
-files. It does this by looking at the number of elements in the score
-file names---discarding the @samp{all} elements.
+@node Gnus Unplugged
+@section Gnus Unplugged
+@cindex offline
+@cindex unplugged
+@cindex agent
+@cindex Gnus agent
+@cindex Gnus unplugged
-@item gnus-score-find-hierarchical
-@findex gnus-score-find-hierarchical
-Apply all score files from all the parent groups. This means that you
-can't have score files like @file{all.SCORE}, but you can have
-@file{SCORE}, @file{comp.SCORE} and @file{comp.emacs.SCORE}.
+In olden times (ca. February '88), people used to run their newsreaders
+on big machines with permanent connections to the net. News transport
+was dealt with by news servers, and all the newsreaders had to do was to
+read news. Believe it or not.
-@end table
-This variable can also be a list of functions. In that case, all these
-functions will be called, and all the returned lists of score files will
-be applied. These functions can also return lists of score alists
-directly. In that case, the functions that return these non-file score
-alists should probably be placed before the ``real'' score file
-functions, to ensure that the last score file returned is the local
-score file. Phu.
+Nowadays most people read news and mail at home, and use some sort of
+modem to connect to the net. To avoid running up huge phone bills, it
+would be nice to have a way to slurp down all the news and mail, hang up
+the phone, read for several hours, and then upload any responses you
+have to make. And then you repeat the procedure.
-@item gnus-score-expiry-days
-@vindex gnus-score-expiry-days
-This variable says how many days should pass before an unused score file
-entry is expired. If this variable is @code{nil}, no score file entries
-are expired. It's 7 by default.
+Of course, you can use news servers for doing this as well. I've used
+@code{inn} together with @code{slurp}, @code{pop} and @code{sendmail}
+for some years, but doing that's a bore. Moving the news server
+functionality up to the newsreader makes sense if you're the only person
+reading news on a machine.
-@item gnus-update-score-entry-dates
-@vindex gnus-update-score-entry-dates
-If this variable is non-@code{nil}, matching score entries will have
-their dates updated. (This is how Gnus controls expiry---all
-non-matching entries will become too old while matching entries will
-stay fresh and young.) However, if you set this variable to @code{nil},
-even matching entries will grow old and will have to face that oh-so
-grim reaper.
+Setting up Gnus as an ``offline'' newsreader is quite simple. In
+fact, you don't have to configure anything as the agent is now enabled
+by default (@pxref{Agent Variables, gnus-agent}).
-@item gnus-score-after-write-file-function
-@vindex gnus-score-after-write-file-function
-Function called with the name of the score file just written.
+Of course, to use it as such, you have to learn a few new commands.
-@item gnus-score-thread-simplify
-@vindex gnus-score-thread-simplify
-If this variable is non-@code{nil}, article subjects will be simplified
-for subject scoring purposes in the same manner as with
-threading---according to the current value of
-gnus-simplify-subject-functions. If the scoring entry uses
-@code{substring} or @code{exact} matching, the match will also be
-simplified in this manner.
+@menu
+* Agent Basics:: How it all is supposed to work.
+* Agent Categories:: How to tell the Gnus Agent what to download.
+* Agent Commands:: New commands for all the buffers.
+* Agent Visuals:: Ways that the agent may effect your summary buffer.
+* Agent as Cache:: The Agent is a big cache too.
+* Agent Expiry:: How to make old articles go away.
+* Agent Regeneration:: How to recover from lost connections and other accidents.
+* Agent and IMAP:: How to use the Agent with @acronym{IMAP}.
+* Outgoing Messages:: What happens when you post/mail something?
+* Agent Variables:: Customizing is fun.
+* Example Setup:: An example @file{~/.gnus.el} file for offline people.
+* Batching Agents:: How to fetch news from a @code{cron} job.
+* Agent Caveats:: What you think it'll do and what it does.
+@end menu
-@end table
+@node Agent Basics
+@subsection Agent Basics
-@node Score File Format
-@section Score File Format
-@cindex score file format
+First, let's get some terminology out of the way.
-A score file is an @code{emacs-lisp} file that normally contains just a
-single form. Casual users are not expected to edit these files;
-everything can be changed from the summary buffer.
+The Gnus Agent is said to be @dfn{unplugged} when you have severed the
+connection to the net (and notified the Agent that this is the case).
+When the connection to the net is up again (and Gnus knows this), the
+Agent is @dfn{plugged}.
-Anyway, if you'd like to dig into it yourself, here's an example:
+The @dfn{local} machine is the one you're running on, and which isn't
+connected to the net continuously.
-@lisp
-(("from"
- ("Lars Ingebrigtsen" -10000)
- ("Per Abrahamsen")
- ("larsi\\|lmi" -50000 nil R))
- ("subject"
- ("Ding is Badd" nil 728373))
- ("xref"
- ("alt.politics" -1000 728372 s))
- ("lines"
- (2 -100 nil <))
- (mark 0)
- (expunge -1000)
- (mark-and-expunge -10)
- (read-only nil)
- (orphan -10)
- (adapt t)
- (files "/hom/larsi/News/gnu.SCORE")
- (exclude-files "all.SCORE")
- (local (gnus-newsgroup-auto-expire t)
- (gnus-summary-make-false-root empty))
- (eval (ding)))
-@end lisp
+@dfn{Downloading} means fetching things from the net to your local
+machine. @dfn{Uploading} is doing the opposite.
-This example demonstrates most score file elements. For a different
-approach, see @pxref{Advanced Scoring}.
+You know that Gnus gives you all the opportunity you'd ever want for
+shooting yourself in the foot. Some people call it flexibility. Gnus
+is also customizable to a great extent, which means that the user has a
+say on how Gnus behaves. Other newsreaders might unconditionally shoot
+you in your foot, but with Gnus, you have a choice!
+
+Gnus is never really in plugged or unplugged state. Rather, it applies
+that state to each server individually. This means that some servers
+can be plugged while others can be unplugged. Additionally, some
+servers can be ignored by the Agent altogether (which means that
+they're kinda like plugged always).
+
+So when you unplug the Agent and then wonder why is Gnus opening a
+connection to the Net, the next step to do is to look whether all
+servers are agentized. If there is an unagentized server, you found
+the culprit.
+
+Another thing is the @dfn{offline} state. Sometimes, servers aren't
+reachable. When Gnus notices this, it asks you whether you want the
+server to be switched to offline state. If you say yes, then the
+server will behave somewhat as if it was unplugged, except that Gnus
+will ask you whether you want to switch it back online again.
-Even though this looks much like lisp code, nothing here is actually
-@code{eval}ed. The lisp reader is used to read this form, though, so it
-has to be valid syntactically, if not semantically.
+Let's take a typical Gnus session using the Agent.
-Six keys are supported by this alist:
+@itemize @bullet
-@table @code
+@item
+@findex gnus-unplugged
+You start Gnus with @code{gnus-unplugged}. This brings up the Gnus
+Agent in a disconnected state. You can read all the news that you have
+already fetched while in this mode.
-@item STRING
-If the key is a string, it is the name of the header to perform the
-match on. Scoring can only be performed on these eight headers:
-@code{From}, @code{Subject}, @code{References}, @code{Message-ID},
-@code{Xref}, @code{Lines}, @code{Chars} and @code{Date}. In addition to
-these headers, there are three strings to tell Gnus to fetch the entire
-article and do the match on larger parts of the article: @code{Body}
-will perform the match on the body of the article, @code{Head} will
-perform the match on the head of the article, and @code{All} will
-perform the match on the entire article. Note that using any of these
-last three keys will slow down group entry @emph{considerably}. The
-final ``header'' you can score on is @code{Followup}. These score
-entries will result in new score entries being added for all follow-ups
-to articles that matches these score entries.
+@item
+You then decide to see whether any new news has arrived. You connect
+your machine to the net (using PPP or whatever), and then hit @kbd{J j}
+to make Gnus become @dfn{plugged} and use @kbd{g} to check for new mail
+as usual. To check for new mail in unplugged mode (@pxref{Mail
+Source Specifiers}).
-Following this key is a arbitrary number of score entries, where each
-score entry has one to four elements.
-@enumerate
+@item
+You can then read the new news immediately, or you can download the
+news onto your local machine. If you want to do the latter, you press
+@kbd{g} to check if there are any new news and then @kbd{J s} to fetch
+all the eligible articles in all the groups. (To let Gnus know which
+articles you want to download, @pxref{Agent Categories}).
@item
-The first element is the @dfn{match element}. On most headers this will
-be a string, but on the Lines and Chars headers, this must be an
-integer.
+After fetching the articles, you press @kbd{J j} to make Gnus become
+unplugged again, and you shut down the PPP thing (or whatever). And
+then you read the news offline.
@item
-If the second element is present, it should be a number---the @dfn{score
-element}. This number should be an integer in the neginf to posinf
-interval. This number is added to the score of the article if the match
-is successful. If this element is not present, the
-@code{gnus-score-interactive-default-score} number will be used
-instead. This is 1000 by default.
+And then you go to step 2.
+@end itemize
+
+Here are some things you should do the first time (or so) that you use
+the Agent.
+
+@itemize @bullet
@item
-If the third element is present, it should be a number---the @dfn{date
-element}. This date says when the last time this score entry matched,
-which provides a mechanism for expiring the score entries. It this
-element is not present, the score entry is permanent. The date is
-represented by the number of days since December 31, 1 BCE.
+Decide which servers should be covered by the Agent. If you have a mail
+back end, it would probably be nonsensical to have it covered by the
+Agent. Go to the server buffer (@kbd{^} in the group buffer) and press
+@kbd{J a} on the server (or servers) that you wish to have covered by the
+Agent (@pxref{Server Agent Commands}), or @kbd{J r} on automatically
+added servers you do not wish to have covered by the Agent. By default,
+all @code{nntp} and @code{nnimap} servers in @code{gnus-select-method} and
+@code{gnus-secondary-select-methods} are agentized.
@item
-If the fourth element is present, it should be a symbol---the @dfn{type
-element}. This element specifies what function should be used to see
-whether this score entry matches the article. What match types that can
-be used depends on what header you wish to perform the match on.
-@table @dfn
+Decide on download policy. It's fairly simple once you decide whether
+you are going to use agent categories, topic parameters, and/or group
+parameters to implement your policy. If you're new to gnus, it
+is probably best to start with a category, @xref{Agent Categories}.
-@item From, Subject, References, Xref, Message-ID
-For most header types, there are the @code{r} and @code{R} (regexp), as
-well as @code{s} and @code{S} (substring) types, and @code{e} and
-@code{E} (exact match), and @code{w} (word match) types. If this
-element is not present, Gnus will assume that substring matching should
-be used. @code{R}, @code{S}, and @code{E} differ from the others in
-that the matches will be done in a case-sensitive manner. All these
-one-letter types are really just abbreviations for the @code{regexp},
-@code{string}, @code{exact}, and @code{word} types, which you can use
-instead, if you feel like.
+Both topic parameters (@pxref{Topic Parameters}) and agent categories
+(@pxref{Agent Categories}) provide for setting a policy that applies
+to multiple groups. Which you use is entirely up to you. Topic
+parameters do override categories so, if you mix the two, you'll have
+to take that into account. If you have a few groups that deviate from
+your policy, you can use group parameters (@pxref{Group Parameters}) to
+configure them.
-@item Lines, Chars
-These two headers use different match types: @code{<}, @code{>},
-@code{=}, @code{>=} and @code{<=}.
+@item
+Uhm@dots{} that's it.
+@end itemize
-These predicates are true if
-@example
-(PREDICATE HEADER MATCH)
-@end example
+@node Agent Categories
+@subsection Agent Categories
-evaluates to non-@code{nil}. For instance, the advanced match
-@code{("lines" 4 <)} (@pxref{Advanced Scoring}) will result in the
-following form:
+One of the main reasons to integrate the news transport layer into the
+newsreader is to allow greater control over what articles to download.
+There's not much point in downloading huge amounts of articles, just to
+find out that you're not interested in reading any of them. It's better
+to be somewhat more conservative in choosing what to download, and then
+mark the articles for downloading manually if it should turn out that
+you're interested in the articles anyway.
-@lisp
-(< header-value 4)
-@end lisp
+One of the more effective methods for controlling what is to be
+downloaded is to create a @dfn{category} and then assign some (or all)
+groups to this category. Groups that do not belong in any other
+category belong to the @code{default} category. Gnus has its own
+buffer for creating and managing categories.
+
+If you prefer, you can also use group parameters (@pxref{Group
+Parameters}) and topic parameters (@pxref{Topic Parameters}) for an
+alternative approach to controlling the agent. The only real
+difference is that categories are specific to the agent (so there is
+less to learn) while group and topic parameters include the kitchen
+sink.
+
+Since you can set agent parameters in several different places we have
+a rule to decide which source to believe. This rule specifies that
+the parameter sources are checked in the following order: group
+parameters, topic parameters, agent category, and finally customizable
+variables. So you can mix all of these sources to produce a wide range
+of behavior, just don't blame me if you don't remember where you put
+your settings.
-Or to put it another way: When using @code{<} on @code{Lines} with 4 as
-the match, we get the score added if the article has less than 4 lines.
-(It's easy to get confused and think it's the other way around. But
-it's not. I think.)
+@menu
+* Category Syntax:: What a category looks like.
+* Category Buffer:: A buffer for maintaining categories.
+* Category Variables:: Customize'r'Us.
+@end menu
-When matching on @code{Lines}, be careful because some backends (like
-@code{nndir}) do not generate @code{Lines} header, so every article ends
-up being marked as having 0 lines. This can lead to strange results if
-you happen to lower score of the articles with few lines.
-@item Date
-For the Date header we have three kinda silly match types:
-@code{before}, @code{at} and @code{after}. I can't really imagine this
-ever being useful, but, like, it would feel kinda silly not to provide
-this function. Just in case. You never know. Better safe than sorry.
-Once burnt, twice shy. Don't judge a book by its cover. Never not have
-sex on a first date. (I have been told that at least one person, and I
-quote, ``found this function indispensable'', however.)
+@node Category Syntax
+@subsubsection Category Syntax
-@cindex ISO8601
-@cindex date
-A more useful match type is @code{regexp}. With it, you can match the
-date string using a regular expression. The date is normalized to
-ISO8601 compact format first---@var{YYYYMMDD}@code{T}@var{HHMMSS}. If
-you want to match all articles that have been posted on April 1st in
-every year, you could use @samp{....0401.........} as a match string,
-for instance. (Note that the date is kept in its original time zone, so
-this will match articles that were posted when it was April 1st where
-the article was posted from. Time zones are such wholesome fun for the
-whole family, eh?)
+A category consists of a name, the list of groups belonging to the
+category, and a number of optional parameters that override the
+customizable variables. The complete list of agent parameters are
+listed below.
-@item Head, Body, All
-These three match keys use the same match types as the @code{From} (etc)
-header uses.
+@cindex Agent Parameters
+@table @code
+@item agent-cat-name
+The name of the category.
-@item Followup
-This match key is somewhat special, in that it will match the
-@code{From} header, and affect the score of not only the matching
-articles, but also all followups to the matching articles. This allows
-you e.g. increase the score of followups to your own articles, or
-decrease the score of followups to the articles of some known
-trouble-maker. Uses the same match types as the @code{From} header
-uses. (Using this match key will lead to creation of @file{ADAPT}
-files.)
-
-@item Thread
-This match key works along the same lines as the @code{Followup} match
-key. If you say that you want to score on a (sub-)thread started by an article with a @code{Message-ID} @var{X}, then you add a
-@samp{thread} match. This will add a new @samp{thread} match for each
-article that has @var{X} in its @code{References} header. (These new
-@samp{thread} matches will use the @code{Message-ID}s of these matching
-articles.) This will ensure that you can raise/lower the score of an
-entire thread, even though some articles in the thread may not have
-complete @code{References} headers. Note that using this may lead to
-undeterministic scores of the articles in the thread. (Using this match
-key will lead to creation of @file{ADAPT} files.)
-@end table
-@end enumerate
+@item agent-groups
+The list of groups that are in this category.
-@cindex Score File Atoms
-@item mark
-The value of this entry should be a number. Any articles with a score
-lower than this number will be marked as read.
+@item agent-predicate
+A predicate which (generally) gives a rough outline of which articles
+are eligible for downloading; and
-@item expunge
-The value of this entry should be a number. Any articles with a score
-lower than this number will be removed from the summary buffer.
+@item agent-score-file
+a score rule which (generally) gives you a finer granularity when
+deciding what articles to download. (Note that this @dfn{download
+score} is not necessarily related to normal scores.)
-@item mark-and-expunge
-The value of this entry should be a number. Any articles with a score
-lower than this number will be marked as read and removed from the
-summary buffer.
+@item agent-enable-expiration
+a boolean indicating whether the agent should expire old articles in
+this group. Most groups should be expired to conserve disk space. In
+fact, its probably safe to say that the gnus.* hierarchy contains the
+only groups that should not be expired.
-@item thread-mark-and-expunge
-The value of this entry should be a number. All articles that belong to
-a thread that has a total score below this number will be marked as read
-and removed from the summary buffer. @code{gnus-thread-score-function}
-says how to compute the total score for a thread.
+@item agent-days-until-old
+an integer indicating the number of days that the agent should wait
+before deciding that a read article is safe to expire.
-@item files
-The value of this entry should be any number of file names. These files
-are assumed to be score files as well, and will be loaded the same way
-this one was.
+@item agent-low-score
+an integer that overrides the value of @code{gnus-agent-low-score}.
-@item exclude-files
-The clue of this entry should be any number of files. These files will
-not be loaded, even though they would normally be so, for some reason or
-other.
+@item agent-high-score
+an integer that overrides the value of @code{gnus-agent-high-score}.
-@item eval
-The value of this entry will be @code{eval}el. This element will be
-ignored when handling global score files.
+@item agent-length-when-short
+an integer that overrides the value of
+@code{gnus-agent-short-article}.
-@item read-only
-Read-only score files will not be updated or saved. Global score files
-should feature this atom (@pxref{Global Score Files}). (Note:
-@dfn{Global} here really means @dfn{global}; not your personal
-apply-to-all-groups score files.)
+@item agent-length-when-long
+an integer that overrides the value of @code{gnus-agent-long-article}.
-@item orphan
-The value of this entry should be a number. Articles that do not have
-parents will get this number added to their scores. Imagine you follow
-some high-volume newsgroup, like @samp{comp.lang.c}. Most likely you
-will only follow a few of the threads, also want to see any new threads.
+@item agent-enable-undownloaded-faces
+a symbol indicating whether the summary buffer should display
+undownloaded articles using the @code{gnus-summary-*-undownloaded-face}
+faces. Any symbol other than @code{nil} will enable the use of
+undownloaded faces.
+@end table
-You can do this with the following two score file entries:
+The name of a category can not be changed once the category has been
+created.
-@example
- (orphan -500)
- (mark-and-expunge -100)
-@end example
+Each category maintains a list of groups that are exclusive members of
+that category. The exclusivity rule is automatically enforced, add a
+group to a new category and it is automatically removed from its old
+category.
-When you enter the group the first time, you will only see the new
-threads. You then raise the score of the threads that you find
-interesting (with @kbd{I T} or @kbd{I S}), and ignore (@kbd{C y}) the
-rest. Next time you enter the group, you will see new articles in the
-interesting threads, plus any new threads.
+A predicate in its simplest form can be a single predicate such as
+@code{true} or @code{false}. These two will download every available
+article or nothing respectively. In the case of these two special
+predicates an additional score rule is superfluous.
-I.e.---the orphan score atom is for high-volume groups where there
-exist a few interesting threads which can't be found automatically by
-ordinary scoring rules.
+Predicates of @code{high} or @code{low} download articles in respect of
+their scores in relationship to @code{gnus-agent-high-score} and
+@code{gnus-agent-low-score} as described below.
-@item adapt
-This entry controls the adaptive scoring. If it is @code{t}, the
-default adaptive scoring rules will be used. If it is @code{ignore}, no
-adaptive scoring will be performed on this group. If it is a list, this
-list will be used as the adaptive scoring rules. If it isn't present,
-or is something other than @code{t} or @code{ignore}, the default
-adaptive scoring rules will be used. If you want to use adaptive
-scoring on most groups, you'd set @code{gnus-use-adaptive-scoring} to
-@code{t}, and insert an @code{(adapt ignore)} in the groups where you do
-not want adaptive scoring. If you only want adaptive scoring in a few
-groups, you'd set @code{gnus-use-adaptive-scoring} to @code{nil}, and
-insert @code{(adapt t)} in the score files of the groups where you want
-it.
+To gain even finer control of what is to be regarded eligible for
+download a predicate can consist of a number of predicates with logical
+operators sprinkled in between.
-@item adapt-file
-All adaptive score entries will go to the file named by this entry. It
-will also be applied when entering the group. This atom might be handy
-if you want to adapt on several groups at once, using the same adaptive
-file for a number of groups.
+Perhaps some examples are in order.
-@item local
-@cindex local variables
-The value of this entry should be a list of @code{(VAR VALUE)} pairs.
-Each @var{var} will be made buffer-local to the current summary buffer,
-and set to the value specified. This is a convenient, if somewhat
-strange, way of setting variables in some groups if you don't like hooks
-much. Note that the @var{value} won't be evaluated.
-@end table
+Here's a simple predicate. (It's the default predicate, in fact, used
+for all groups that don't belong to any other category.)
+@lisp
+short
+@end lisp
-@node Score File Editing
-@section Score File Editing
+Quite simple, eh? This predicate is true if and only if the article is
+short (for some value of ``short'').
-You normally enter all scoring commands from the summary buffer, but you
-might feel the urge to edit them by hand as well, so we've supplied you
-with a mode for that.
+Here's a more complex predicate:
-It's simply a slightly customized @code{emacs-lisp} mode, with these
-additional commands:
+@lisp
+(or high
+ (and
+ (not low)
+ (not long)))
+@end lisp
-@table @kbd
+This means that an article should be downloaded if it has a high score,
+or if the score is not low and the article is not long. You get the
+drift.
-@item C-c C-c
-@kindex C-c C-c (Score)
-@findex gnus-score-edit-done
-Save the changes you have made and return to the summary buffer
-(@code{gnus-score-edit-done}).
+The available logical operators are @code{or}, @code{and} and
+@code{not}. (If you prefer, you can use the more ``C''-ish operators
+@samp{|}, @code{&} and @code{!} instead.)
-@item C-c C-d
-@kindex C-c C-d (Score)
-@findex gnus-score-edit-insert-date
-Insert the current date in numerical format
-(@code{gnus-score-edit-insert-date}). This is really the day number, if
-you were wondering.
+The following predicates are pre-defined, but if none of these fit what
+you want to do, you can write your own.
-@item C-c C-p
-@kindex C-c C-p (Score)
-@findex gnus-score-pretty-print
-The adaptive score files are saved in an unformatted fashion. If you
-intend to read one of these files, you want to @dfn{pretty print} it
-first. This command (@code{gnus-score-pretty-print}) does that for
-you.
+When evaluating each of these predicates, the named constant will be
+bound to the value determined by calling
+@code{gnus-agent-find-parameter} on the appropriate parameter. For
+example, gnus-agent-short-article will be bound to
+@code{(gnus-agent-find-parameter group 'agent-short-article)}. This
+means that you can specify a predicate in your category then tune that
+predicate to individual groups.
-@end table
+@table @code
+@item short
+True iff the article is shorter than @code{gnus-agent-short-article}
+lines; default 100.
-Type @kbd{M-x gnus-score-mode} to use this mode.
+@item long
+True iff the article is longer than @code{gnus-agent-long-article}
+lines; default 200.
-@vindex gnus-score-mode-hook
-@code{gnus-score-menu-hook} is run in score mode buffers.
+@item low
+True iff the article has a download score less than
+@code{gnus-agent-low-score}; default 0.
-In the summary buffer you can use commands like @kbd{V f} and @kbd{V
-e} to begin editing score files.
+@item high
+True iff the article has a download score greater than
+@code{gnus-agent-high-score}; default 0.
+@item spam
+True iff the Gnus Agent guesses that the article is spam. The
+heuristics may change over time, but at present it just computes a
+checksum and sees whether articles match.
-@node Adaptive Scoring
-@section Adaptive Scoring
-@cindex adaptive scoring
+@item true
+Always true.
-If all this scoring is getting you down, Gnus has a way of making it all
-happen automatically---as if by magic. Or rather, as if by artificial
-stupidity, to be precise.
+@item false
+Always false.
+@end table
-@vindex gnus-use-adaptive-scoring
-When you read an article, or mark an article as read, or kill an
-article, you leave marks behind. On exit from the group, Gnus can sniff
-these marks and add score elements depending on what marks it finds.
-You turn on this ability by setting @code{gnus-use-adaptive-scoring} to
-@code{t} or @code{(line)}. If you want score adaptively on separate
-words appearing in the subjects, you should set this variable to
-@code{(word)}. If you want to use both adaptive methods, set this
-variable to @code{(word line)}.
+If you want to create your own predicate function, here's what you have
+to know: The functions are called with no parameters, but the
+@code{gnus-headers} and @code{gnus-score} dynamic variables are bound to
+useful values.
-@vindex gnus-default-adaptive-score-alist
-To give you complete control over the scoring process, you can customize
-the @code{gnus-default-adaptive-score-alist} variable. For instance, it
-might look something like this:
+For example, you could decide that you don't want to download articles
+that were posted more than a certain number of days ago (e.g. posted
+more than @code{gnus-agent-expire-days} ago) you might write a function
+something along the lines of the following:
@lisp
-(defvar gnus-default-adaptive-score-alist
- '((gnus-unread-mark)
- (gnus-ticked-mark (from 4))
- (gnus-dormant-mark (from 5))
- (gnus-del-mark (from -4) (subject -1))
- (gnus-read-mark (from 4) (subject 2))
- (gnus-expirable-mark (from -1) (subject -1))
- (gnus-killed-mark (from -1) (subject -3))
- (gnus-kill-file-mark)
- (gnus-ancient-mark)
- (gnus-low-score-mark)
- (gnus-catchup-mark (from -1) (subject -1))))
+(defun my-article-old-p ()
+ "Say whether an article is old."
+ (< (time-to-days (date-to-time (mail-header-date gnus-headers)))
+ (- (time-to-days (current-time)) gnus-agent-expire-days)))
@end lisp
-As you see, each element in this alist has a mark as a key (either a
-variable name or a ``real'' mark---a character). Following this key is
-a arbitrary number of header/score pairs. If there are no header/score
-pairs following the key, no adaptive scoring will be done on articles
-that have that key as the article mark. For instance, articles with
-@code{gnus-unread-mark} in the example above will not get adaptive score
-entries.
+with the predicate then defined as:
-Each article can have only one mark, so just a single of these rules
-will be applied to each article.
+@lisp
+(not my-article-old-p)
+@end lisp
-To take @code{gnus-del-mark} as an example---this alist says that all
-articles that have that mark (i.e., are marked with @samp{D}) will have a
-score entry added to lower based on the @code{From} header by -4, and
-lowered by @code{Subject} by -1. Change this to fit your prejudices.
+or you could append your predicate to the predefined
+@code{gnus-category-predicate-alist} in your @file{~/.gnus.el} or
+wherever.
-If you have marked 10 articles with the same subject with
-@code{gnus-del-mark}, the rule for that mark will be applied ten times.
-That means that that subject will get a score of ten times -1, which
-should be, unless I'm much mistaken, -10.
+@lisp
+(require 'gnus-agent)
+(setq gnus-category-predicate-alist
+ (append gnus-category-predicate-alist
+ '((old . my-article-old-p))))
+@end lisp
-If you have auto-expirable (mail) groups (@pxref{Expiring Mail}), all
-the read articles will be marked with the @samp{E} mark. This'll
-probably make adaptive scoring slightly impossible, so auto-expiring and
-adaptive scoring doesn't really mix very well.
+and simply specify your predicate as:
-The headers you can score on are @code{from}, @code{subject},
-@code{message-id}, @code{references}, @code{xref}, @code{lines},
-@code{chars} and @code{date}. In addition, you can score on
-@code{followup}, which will create an adaptive score entry that matches
-on the @code{References} header using the @code{Message-ID} of the
-current article, thereby matching the following thread.
+@lisp
+(not old)
+@end lisp
-You can also score on @code{thread}, which will try to score all
-articles that appear in a thread. @code{thread} matches uses a
-@code{Message-ID} to match on the @code{References} header of the
-article. If the match is made, the @code{Message-ID} of the article is
-added to the @code{thread} rule. (Think about it. I'd recommend two
-aspirins afterwards.)
+If/when using something like the above, be aware that there are many
+misconfigured systems/mailers out there and so an article's date is not
+always a reliable indication of when it was posted. Hell, some people
+just don't give a damn.
-If you use this scheme, you should set the score file atom @code{mark}
-to something small---like -300, perhaps, to avoid having small random
-changes result in articles getting marked as read.
-
-After using adaptive scoring for a week or so, Gnus should start to
-become properly trained and enhance the authors you like best, and kill
-the authors you like least, without you having to say so explicitly.
-
-You can control what groups the adaptive scoring is to be performed on
-by using the score files (@pxref{Score File Format}). This will also
-let you use different rules in different groups.
-
-@vindex gnus-adaptive-file-suffix
-The adaptive score entries will be put into a file where the name is the
-group name with @code{gnus-adaptive-file-suffix} appended. The default
-is @samp{ADAPT}.
-
-@vindex gnus-score-exact-adapt-limit
-When doing adaptive scoring, substring or fuzzy matching would probably
-give you the best results in most cases. However, if the header one
-matches is short, the possibility for false positives is great, so if
-the length of the match is less than
-@code{gnus-score-exact-adapt-limit}, exact matching will be used. If
-this variable is @code{nil}, exact matching will always be used to avoid
-this problem.
-
-@vindex gnus-default-adaptive-word-score-alist
-As mentioned above, you can adapt either on individual words or entire
-headers. If you adapt on words, the
-@code{gnus-default-adaptive-word-score-alist} variable says what score
-each instance of a word should add given a mark.
+The above predicates apply to @emph{all} the groups which belong to the
+category. However, if you wish to have a specific predicate for an
+individual group within a category, or you're just too lazy to set up a
+new category, you can enter a group's individual predicate in its group
+parameters like so:
@lisp
-(setq gnus-default-adaptive-word-score-alist
- `((,gnus-read-mark . 30)
- (,gnus-catchup-mark . -10)
- (,gnus-killed-mark . -20)
- (,gnus-del-mark . -15)))
+(agent-predicate . short)
@end lisp
-This is the default value. If you have adaption on words enabled, every
-word that appears in subjects of articles marked with
-@code{gnus-read-mark} will result in a score rule that increase the
-score with 30 points.
-
-@vindex gnus-default-ignored-adaptive-words
-@vindex gnus-ignored-adaptive-words
-Words that appear in the @code{gnus-default-ignored-adaptive-words} list
-will be ignored. If you wish to add more words to be ignored, use the
-@code{gnus-ignored-adaptive-words} list instead.
+This is the group/topic parameter equivalent of the agent category default.
+Note that when specifying a single word predicate like this, the
+@code{agent-predicate} specification must be in dotted pair notation.
-@vindex gnus-adaptive-word-syntax-table
-When the scoring is done, @code{gnus-adaptive-word-syntax-table} is the
-syntax table in effect. It is similar to the standard syntax table, but
-it considers numbers to be non-word-constituent characters.
+The equivalent of the longer example from above would be:
-@vindex gnus-adaptive-word-minimum
-If @code{gnus-adaptive-word-minimum} is set to a number, the adaptive
-word scoring process will never bring down the score of an article to
-below this number. The default is @code{nil}.
+@lisp
+(agent-predicate or high (and (not low) (not long)))
+@end lisp
-@vindex gnus-adaptive-word-no-group-words
-If @code{gnus-adaptive-word-no-group-words} is set to @code{t}, gnus
-won't adaptively word score any of the words in the group name. Useful
-for groups like @samp{comp.editors.emacs}, where most of the subject
-lines contain the word @samp{emacs}.
+The outer parenthesis required in the category specification are not
+entered here as, not being in dotted pair notation, the value of the
+predicate is assumed to be a list.
-After using this scheme for a while, it might be nice to write a
-@code{gnus-psychoanalyze-user} command to go through the rules and see
-what words you like and what words you don't like. Or perhaps not.
-Note that the adaptive word scoring thing is highly experimental and is
-likely to change in the future. Initial impressions seem to indicate
-that it's totally useless as it stands. Some more work (involving more
-rigorous statistical methods) will have to be done to make this useful.
+Now, the syntax of the download score is the same as the syntax of
+normal score files, except that all elements that require actually
+seeing the article itself are verboten. This means that only the
+following headers can be scored on: @code{Subject}, @code{From},
+@code{Date}, @code{Message-ID}, @code{References}, @code{Chars},
+@code{Lines}, and @code{Xref}.
+As with predicates, the specification of the @code{download score rule}
+to use in respect of a group can be in either the category definition if
+it's to be applicable to all groups in therein, or a group's parameters
+if it's to be specific to that group.
-@node Home Score File
-@section Home Score File
+In both of these places the @code{download score rule} can take one of
+three forms:
-The score file where new score file entries will go is called the
-@dfn{home score file}. This is normally (and by default) the score file
-for the group itself. For instance, the home score file for
-@samp{gnu.emacs.gnus} is @file{gnu.emacs.gnus.SCORE}.
+@enumerate
+@item
+Score rule
-However, this may not be what you want. It is often convenient to share
-a common home score file among many groups---all @samp{emacs} groups
-could perhaps use the same home score file.
+This has the same syntax as a normal Gnus score file except only a
+subset of scoring keywords are available as mentioned above.
-@vindex gnus-home-score-file
-The variable that controls this is @code{gnus-home-score-file}. It can
-be:
+example:
-@enumerate
+@itemize @bullet
@item
-A string. Then this file will be used as the home score file for all
-groups.
+Category specification
-@item
-A function. The result of this function will be used as the home score
-file. The function will be called with the name of the group as the
-parameter.
+@lisp
+(("from"
+ ("Lars Ingebrigtsen" 1000000 nil s))
+("lines"
+ (500 -100 nil <)))
+@end lisp
@item
-A list. The elements in this list can be:
+Group/Topic Parameter specification
-@enumerate
-@item
-@var{(regexp file-name)}. If the @var{regexp} matches the group name,
-the @var{file-name} will will be used as the home score file.
+@lisp
+(agent-score ("from"
+ ("Lars Ingebrigtsen" 1000000 nil s))
+ ("lines"
+ (500 -100 nil <)))
+@end lisp
-@item
-A function. If the function returns non-nil, the result will be used as
-the home score file.
+Again, note the omission of the outermost parenthesis here.
+@end itemize
@item
-A string. Use the string as the home score file.
-@end enumerate
+Agent score file
-The list will be traversed from the beginning towards the end looking
-for matches.
+These score files must @emph{only} contain the permitted scoring
+keywords stated above.
-@end enumerate
+example:
-So, if you want to use just a single score file, you could say:
+@itemize @bullet
+@item
+Category specification
@lisp
-(setq gnus-home-score-file
- "my-total-score-file.SCORE")
+("~/News/agent.SCORE")
@end lisp
-If you want to use @file{gnu.SCORE} for all @samp{gnu} groups and
-@file{rec.SCORE} for all @samp{rec} groups (and so on), you can say:
+or perhaps
-@findex gnus-hierarchial-home-score-file
@lisp
-(setq gnus-home-score-file
- 'gnus-hierarchial-home-score-file)
+("~/News/agent.SCORE" "~/News/agent.group.SCORE")
@end lisp
-This is a ready-made function provided for your convenience.
-Other functions include
-
-@table @code
-@item gnus-current-home-score-file
-@findex gnus-current-home-score-file
-Return the ``current'' regular score file. This will make scoring
-commands add entry to the ``innermost'' matching score file.
-
-@end table
-
-If you want to have one score file for the @samp{emacs} groups and
-another for the @samp{comp} groups, while letting all other groups use
-their own home score files:
+@item
+Group Parameter specification
@lisp
-(setq gnus-home-score-file
- ;; All groups that match the regexp "\\.emacs"
- '(("\\.emacs" "emacs.SCORE")
- ;; All the comp groups in one score file
- ("^comp" "comp.SCORE")))
+(agent-score "~/News/agent.SCORE")
@end lisp
-@vindex gnus-home-adapt-file
-@code{gnus-home-adapt-file} works exactly the same way as
-@code{gnus-home-score-file}, but says what the home adaptive score file
-is instead. All new adaptive file entries will go into the file
-specified by this variable, and the same syntax is allowed.
-
-In addition to using @code{gnus-home-score-file} and
-@code{gnus-home-adapt-file}, you can also use group parameters
-(@pxref{Group Parameters}) and topic parameters (@pxref{Topic
-Parameters}) to achieve much the same. Group and topic parameters take
-precedence over this variable.
+Additional score files can be specified as above. Need I say anything
+about parenthesis?
+@end itemize
+@item
+Use @code{normal} score files
-@node Followups To Yourself
-@section Followups To Yourself
+If you don't want to maintain two sets of scoring rules for a group, and
+your desired @code{downloading} criteria for a group are the same as your
+@code{reading} criteria then you can tell the agent to refer to your
+@code{normal} score files when deciding what to download.
-Gnus offers two commands for picking out the @code{Message-ID} header in
-the current buffer. Gnus will then add a score rule that scores using
-this @code{Message-ID} on the @code{References} header of other
-articles. This will, in effect, increase the score of all articles that
-respond to the article in the current buffer. Quite useful if you want
-to easily note when people answer what you've said.
+These directives in either the category definition or a group's
+parameters will cause the agent to read in all the applicable score
+files for a group, @emph{filtering out} those sections that do not
+relate to one of the permitted subset of scoring keywords.
-@table @code
+@itemize @bullet
+@item
+Category Specification
-@item gnus-score-followup-article
-@findex gnus-score-followup-article
-This will add a score to articles that directly follow up your own
-article.
+@lisp
+file
+@end lisp
-@item gnus-score-followup-thread
-@findex gnus-score-followup-thread
-This will add a score to all articles that appear in a thread ``below''
-your own article.
-@end table
+@item
+Group Parameter specification
-@vindex message-sent-hook
-These two functions are both primarily meant to be used in hooks like
-@code{message-sent-hook}.
+@lisp
+(agent-score . file)
+@end lisp
+@end itemize
+@end enumerate
-If you look closely at your own @code{Message-ID}, you'll notice that
-the first two or three characters are always the same. Here's two of
-mine:
+@node Category Buffer
+@subsubsection Category Buffer
-@example
-<x6u3u47icf.fsf@@eyesore.no>
-<x6sp9o7ibw.fsf@@eyesore.no>
-@end example
+You'd normally do all category maintenance from the category buffer.
+When you enter it for the first time (with the @kbd{J c} command from
+the group buffer), you'll only see the @code{default} category.
-So ``my'' ident on this machine is @samp{x6}. This can be
-exploited---the following rule will raise the score on all followups to
-myself:
+The following commands are available in this buffer:
-@lisp
-("references"
- ("<x6[0-9a-z]+\\.fsf\\(_-_\\)?@@.*eyesore.no>"
- 1000 nil r))
-@end lisp
+@table @kbd
+@item q
+@kindex q (Category)
+@findex gnus-category-exit
+Return to the group buffer (@code{gnus-category-exit}).
-Whether it's the first two or first three characters that are ``yours''
-is system-dependent.
+@item e
+@kindex e (Category)
+@findex gnus-category-customize-category
+Use a customization buffer to set all of the selected category's
+parameters at one time (@code{gnus-category-customize-category}).
+@item k
+@kindex k (Category)
+@findex gnus-category-kill
+Kill the current category (@code{gnus-category-kill}).
-@node Scoring Tips
-@section Scoring Tips
-@cindex scoring tips
+@item c
+@kindex c (Category)
+@findex gnus-category-copy
+Copy the current category (@code{gnus-category-copy}).
-@table @dfn
-
-@item Crossposts
-@cindex crossposts
-@cindex scoring crossposts
-If you want to lower the score of crossposts, the line to match on is
-the @code{Xref} header.
-@lisp
-("xref" (" talk.politics.misc:" -1000))
-@end lisp
+@item a
+@kindex a (Category)
+@findex gnus-category-add
+Add a new category (@code{gnus-category-add}).
-@item Multiple crossposts
-If you want to lower the score of articles that have been crossposted to
-more than, say, 3 groups:
-@lisp
-("xref" ("[^:\n]+:[0-9]+ +[^:\n]+:[0-9]+ +[^:\n]+:[0-9]+" -1000 nil r))
-@end lisp
+@item p
+@kindex p (Category)
+@findex gnus-category-edit-predicate
+Edit the predicate of the current category
+(@code{gnus-category-edit-predicate}).
-@item Matching on the body
-This is generally not a very good idea---it takes a very long time.
-Gnus actually has to fetch each individual article from the server. But
-you might want to anyway, I guess. Even though there are three match
-keys (@code{Head}, @code{Body} and @code{All}), you should choose one
-and stick with it in each score file. If you use any two, each article
-will be fetched @emph{twice}. If you want to match a bit on the
-@code{Head} and a bit on the @code{Body}, just use @code{All} for all
-the matches.
+@item g
+@kindex g (Category)
+@findex gnus-category-edit-groups
+Edit the list of groups belonging to the current category
+(@code{gnus-category-edit-groups}).
-@item Marking as read
-You will probably want to mark articles that has a score below a certain
-number as read. This is most easily achieved by putting the following
-in your @file{all.SCORE} file:
-@lisp
-((mark -100))
-@end lisp
-You may also consider doing something similar with @code{expunge}.
+@item s
+@kindex s (Category)
+@findex gnus-category-edit-score
+Edit the download score rule of the current category
+(@code{gnus-category-edit-score}).
-@item Negated character classes
-If you say stuff like @code{[^abcd]*}, you may get unexpected results.
-That will match newlines, which might lead to, well, The Unknown. Say
-@code{[^abcd\n]*} instead.
+@item l
+@kindex l (Category)
+@findex gnus-category-list
+List all the categories (@code{gnus-category-list}).
@end table
-@node Reverse Scoring
-@section Reverse Scoring
-@cindex reverse scoring
-
-If you want to keep just articles that have @samp{Sex with Emacs} in the
-subject header, and expunge all other articles, you could put something
-like this in your score file:
-
-@lisp
-(("subject"
- ("Sex with Emacs" 2))
- (mark 1)
- (expunge 1))
-@end lisp
+@node Category Variables
+@subsubsection Category Variables
-So, you raise all articles that match @samp{Sex with Emacs} and mark the
-rest as read, and expunge them to boot.
+@table @code
+@item gnus-category-mode-hook
+@vindex gnus-category-mode-hook
+Hook run in category buffers.
+@item gnus-category-line-format
+@vindex gnus-category-line-format
+Format of the lines in the category buffer (@pxref{Formatting
+Variables}). Valid elements are:
-@node Global Score Files
-@section Global Score Files
-@cindex global score files
+@table @samp
+@item c
+The name of the category.
-Sure, other newsreaders have ``global kill files''. These are usually
-nothing more than a single kill file that applies to all groups, stored
-in the user's home directory. Bah! Puny, weak newsreaders!
+@item g
+The number of groups in the category.
+@end table
-What I'm talking about here are Global Score Files. Score files from
-all over the world, from users everywhere, uniting all nations in one
-big, happy score file union! Ange-score! New and untested!
+@item gnus-category-mode-line-format
+@vindex gnus-category-mode-line-format
+Format of the category mode line (@pxref{Mode Line Formatting}).
-@vindex gnus-global-score-files
-All you have to do to use other people's score files is to set the
-@code{gnus-global-score-files} variable. One entry for each score file,
-or each score file directory. Gnus will decide by itself what score
-files are applicable to which group.
+@item gnus-agent-short-article
+@vindex gnus-agent-short-article
+Articles that have fewer lines than this are short. Default 100.
-Say you want to use the score file
-@file{/ftp@@ftp.gnus.org:/pub/larsi/ding/score/soc.motss.SCORE} and
-all score files in the @file{/ftp@@ftp.some-where:/pub/score} directory:
+@item gnus-agent-long-article
+@vindex gnus-agent-long-article
+Articles that have more lines than this are long. Default 200.
-@lisp
-(setq gnus-global-score-files
- '("/ftp@@ftp.gnus.org:/pub/larsi/ding/score/soc.motss.SCORE"
- "/ftp@@ftp.some-where:/pub/score/"))
-@end lisp
+@item gnus-agent-low-score
+@vindex gnus-agent-low-score
+Articles that have a score lower than this have a low score. Default
+0.
-@findex gnus-score-search-global-directories
-Simple, eh? Directory names must end with a @samp{/}. These
-directories are typically scanned only once during each Gnus session.
-If you feel the need to manually re-scan the remote directories, you can
-use the @code{gnus-score-search-global-directories} command.
+@item gnus-agent-high-score
+@vindex gnus-agent-high-score
+Articles that have a score higher than this have a high score. Default
+0.
-Note that, at present, using this option will slow down group entry
-somewhat. (That is---a lot.)
+@item gnus-agent-expire-days
+@vindex gnus-agent-expire-days
+The number of days that a @samp{read} article must stay in the agent's
+local disk before becoming eligible for expiration (While the name is
+the same, this doesn't mean expiring the article on the server. It
+just means deleting the local copy of the article). What is also
+important to understand is that the counter starts with the time the
+article was written to the local disk and not the time the article was
+read.
+Default 7.
+
+@item gnus-agent-enable-expiration
+@vindex gnus-agent-enable-expiration
+Determines whether articles in a group are, by default, expired or
+retained indefinitely. The default is @code{ENABLE} which means that
+you'll have to disable expiration when desired. On the other hand,
+you could set this to @code{DISABLE}. In that case, you would then
+have to enable expiration in selected groups.
-If you want to start maintaining score files for other people to use,
-just put your score file up for anonymous ftp and announce it to the
-world. Become a retro-moderator! Participate in the retro-moderator
-wars sure to ensue, where retro-moderators battle it out for the
-sympathy of the people, luring them to use their score files on false
-premises! Yay! The net is saved!
+@end table
-Here are some tips for the would-be retro-moderator, off the top of my
-head:
-@itemize @bullet
+@node Agent Commands
+@subsection Agent Commands
+@findex gnus-agent-toggle-plugged
+@kindex J j (Agent)
-@item
-Articles heavily crossposted are probably junk.
-@item
-To lower a single inappropriate article, lower by @code{Message-ID}.
-@item
-Particularly brilliant authors can be raised on a permanent basis.
-@item
-Authors that repeatedly post off-charter for the group can safely be
-lowered out of existence.
-@item
-Set the @code{mark} and @code{expunge} atoms to obliterate the nastiest
-articles completely.
+All the Gnus Agent commands are on the @kbd{J} submap. The @kbd{J j}
+(@code{gnus-agent-toggle-plugged}) command works in all modes, and
+toggles the plugged/unplugged state of the Gnus Agent.
-@item
-Use expiring score entries to keep the size of the file down. You
-should probably have a long expiry period, though, as some sites keep
-old articles for a long time.
-@end itemize
-... I wonder whether other newsreaders will support global score files
-in the future. @emph{Snicker}. Yup, any day now, newsreaders like Blue
-Wave, xrn and 1stReader are bound to implement scoring. Should we start
-holding our breath yet?
+@menu
+* Group Agent Commands:: Configure groups and fetch their contents.
+* Summary Agent Commands:: Manually select then fetch specific articles.
+* Server Agent Commands:: Select the servers that are supported by the agent.
+@end menu
-@node Kill Files
-@section Kill Files
-@cindex kill files
-Gnus still supports those pesky old kill files. In fact, the kill file
-entries can now be expiring, which is something I wrote before Daniel
-Quinlan thought of doing score files, so I've left the code in there.
-In short, kill processing is a lot slower (and I do mean @emph{a lot})
-than score processing, so it might be a good idea to rewrite your kill
-files into score files.
+@node Group Agent Commands
+@subsubsection Group Agent Commands
-Anyway, a kill file is a normal @code{emacs-lisp} file. You can put any
-forms into this file, which means that you can use kill files as some
-sort of primitive hook function to be run on group entry, even though
-that isn't a very good idea.
+@table @kbd
+@item J u
+@kindex J u (Agent Group)
+@findex gnus-agent-fetch-groups
+Fetch all eligible articles in the current group
+(@code{gnus-agent-fetch-groups}).
-Normal kill files look like this:
+@item J c
+@kindex J c (Agent Group)
+@findex gnus-enter-category-buffer
+Enter the Agent category buffer (@code{gnus-enter-category-buffer}).
-@lisp
-(gnus-kill "From" "Lars Ingebrigtsen")
-(gnus-kill "Subject" "ding")
-(gnus-expunge "X")
-@end lisp
+@item J s
+@kindex J s (Agent Group)
+@findex gnus-agent-fetch-session
+Fetch all eligible articles in all groups
+(@code{gnus-agent-fetch-session}).
-This will mark every article written by me as read, and remove the
-marked articles from the summary buffer. Very useful, you'll agree.
+@item J S
+@kindex J S (Agent Group)
+@findex gnus-group-send-queue
+Send all sendable messages in the queue group
+(@code{gnus-group-send-queue}). @xref{Drafts}.
-Other programs use a totally different kill file syntax. If Gnus
-encounters what looks like a @code{rn} kill file, it will take a stab at
-interpreting it.
+@item J a
+@kindex J a (Agent Group)
+@findex gnus-agent-add-group
+Add the current group to an Agent category
+(@code{gnus-agent-add-group}). This command understands the
+process/prefix convention (@pxref{Process/Prefix}).
-Two summary functions for editing a GNUS kill file:
+@item J r
+@kindex J r (Agent Group)
+@findex gnus-agent-remove-group
+Remove the current group from its category, if any
+(@code{gnus-agent-remove-group}). This command understands the
+process/prefix convention (@pxref{Process/Prefix}).
-@table @kbd
+@item J Y
+@kindex J Y (Agent Group)
+@findex gnus-agent-synchronize-flags
+Synchronize flags changed while unplugged with remote server, if any.
-@item M-k
-@kindex M-k (Summary)
-@findex gnus-summary-edit-local-kill
-Edit this group's kill file (@code{gnus-summary-edit-local-kill}).
-@item M-K
-@kindex M-K (Summary)
-@findex gnus-summary-edit-global-kill
-Edit the general kill file (@code{gnus-summary-edit-global-kill}).
@end table
-Two group mode functions for editing the kill files:
+
+@node Summary Agent Commands
+@subsubsection Summary Agent Commands
@table @kbd
+@item J #
+@kindex J # (Agent Summary)
+@findex gnus-agent-mark-article
+Mark the article for downloading (@code{gnus-agent-mark-article}).
-@item M-k
-@kindex M-k (Group)
-@findex gnus-group-edit-local-kill
-Edit this group's kill file (@code{gnus-group-edit-local-kill}).
+@item J M-#
+@kindex J M-# (Agent Summary)
+@findex gnus-agent-unmark-article
+Remove the downloading mark from the article
+(@code{gnus-agent-unmark-article}).
-@item M-K
-@kindex M-K (Group)
-@findex gnus-group-edit-global-kill
-Edit the general kill file (@code{gnus-group-edit-global-kill}).
-@end table
-
-Kill file variables:
+@cindex %
+@item @@
+@kindex @@ (Agent Summary)
+@findex gnus-agent-toggle-mark
+Toggle whether to download the article
+(@code{gnus-agent-toggle-mark}). The download mark is @samp{%} by
+default.
-@table @code
-@item gnus-kill-file-name
-@vindex gnus-kill-file-name
-A kill file for the group @samp{soc.motss} is normally called
-@file{soc.motss.KILL}. The suffix appended to the group name to get
-this file name is detailed by the @code{gnus-kill-file-name} variable.
-The ``global'' kill file (not in the score file sense of ``global'', of
-course) is just called @file{KILL}.
+@item J c
+@kindex J c (Agent Summary)
+@findex gnus-agent-catchup
+Mark all articles as read (@code{gnus-agent-catchup}) that are neither cached, downloaded, nor downloadable.
-@vindex gnus-kill-save-kill-file
-@item gnus-kill-save-kill-file
-If this variable is non-@code{nil}, Gnus will save the
-kill file after processing, which is necessary if you use expiring
-kills.
+@item J S
+@kindex J S (Agent Summary)
+@findex gnus-agent-fetch-group
+Download all eligible (@pxref{Agent Categories}) articles in this group.
+(@code{gnus-agent-fetch-group}).
-@item gnus-apply-kill-hook
-@vindex gnus-apply-kill-hook
-@findex gnus-apply-kill-file-unless-scored
-@findex gnus-apply-kill-file
-A hook called to apply kill files to a group. It is
-@code{(gnus-apply-kill-file)} by default. If you want to ignore the
-kill file if you have a score file for the same group, you can set this
-hook to @code{(gnus-apply-kill-file-unless-scored)}. If you don't want
-kill files to be processed, you should set this variable to @code{nil}.
+@item J s
+@kindex J s (Agent Summary)
+@findex gnus-agent-fetch-series
+Download all processable articles in this group.
+(@code{gnus-agent-fetch-series}).
-@item gnus-kill-file-mode-hook
-@vindex gnus-kill-file-mode-hook
-A hook called in kill-file mode buffers.
+@item J u
+@kindex J u (Agent Summary)
+@findex gnus-agent-summary-fetch-group
+Download all downloadable articles in the current group
+(@code{gnus-agent-summary-fetch-group}).
@end table
-@node Converting Kill Files
-@section Converting Kill Files
-@cindex kill files
-@cindex converting kill files
+@node Server Agent Commands
+@subsubsection Server Agent Commands
-If you have loads of old kill files, you may want to convert them into
-score files. If they are ``regular'', you can use
-the @file{gnus-kill-to-score.el} package; if not, you'll have to do it
-by hand.
+@table @kbd
+@item J a
+@kindex J a (Agent Server)
+@findex gnus-agent-add-server
+Add the current server to the list of servers covered by the Gnus Agent
+(@code{gnus-agent-add-server}).
-The kill to score conversion package isn't included in Gnus by default.
-You can fetch it from
-@file{http://www.stud.ifi.uio.no/~larsi/ding-other/gnus-kill-to-score}.
+@item J r
+@kindex J r (Agent Server)
+@findex gnus-agent-remove-server
+Remove the current server from the list of servers covered by the Gnus
+Agent (@code{gnus-agent-remove-server}).
-If your old kill files are very complex---if they contain more
-non-@code{gnus-kill} forms than not, you'll have to convert them by
-hand. Or just let them be as they are. Gnus will still use them as
-before.
+@end table
-@node GroupLens
-@section GroupLens
-@cindex GroupLens
+@node Agent Visuals
+@subsection Agent Visuals
+
+If you open a summary while unplugged and, Gnus knows from the group's
+active range that there are more articles than the headers currently
+stored in the Agent, you may see some articles whose subject looks
+something like @samp{[Undownloaded article #####]}. These are
+placeholders for the missing headers. Aside from setting a mark,
+there is not much that can be done with one of these placeholders.
+When Gnus finally gets a chance to fetch the group's headers, the
+placeholders will automatically be replaced by the actual headers.
+You can configure the summary buffer's maneuvering to skip over the
+placeholders if you care (See @code{gnus-auto-goto-ignores}).
+
+While it may be obvious to all, the only headers and articles
+available while unplugged are those headers and articles that were
+fetched into the Agent while previously plugged. To put it another
+way, "If you forget to fetch something while plugged, you might have a
+less than satisfying unplugged session". For this reason, the Agent
+adds two visual effects to your summary buffer. These effects display
+the download status of each article so that you always know which
+articles will be available when unplugged.
+
+The first visual effect is the @samp{%O} spec. If you customize
+@code{gnus-summary-line-format} to include this specifier, you will add
+a single character field that indicates an article's download status.
+Articles that have been fetched into either the Agent or the Cache,
+will display @code{gnus-downloaded-mark} (defaults to @samp{+}). All
+other articles will display @code{gnus-undownloaded-mark} (defaults to
+@samp{-}). If you open a group that has not been agentized, a space
+(@samp{ }) will be displayed.
+
+The second visual effect are the undownloaded faces. The faces, there
+are three indicating the article's score (low, normal, high), seem to
+result in a love/hate response from many Gnus users. The problem is
+that the face selection is controlled by a list of condition tests and
+face names (See @code{gnus-summary-highlight}). Each condition is
+tested in the order in which it appears in the list so early
+conditions have precedence over later conditions. All of this means
+that, if you tick an undownloaded article, the article will continue
+to be displayed in the undownloaded face rather than the ticked face.
+
+If you use the Agent as a cache (to avoid downloading the same article
+each time you visit it or to minimize your connection time), the
+undownloaded face will probably seem like a good idea. The reason
+being that you do all of our work (marking, reading, deleting) with
+downloaded articles so the normal faces always appear. For those
+users using the agent to improve online performance by caching the NOV
+database (most users since 5.10.2), the undownloaded faces may appear
+to be an absolutely horrible idea. The issue being that, since none
+of their articles have been fetched into the Agent, all of the
+normal faces will be obscured by the undownloaded faces.
+
+If you would like to use the undownloaded faces, you must enable the
+undownloaded faces by setting the @code{agent-enable-undownloaded-faces}
+group parameter to t. This parameter, like all other agent
+parameters, may be set on an Agent Category (@pxref{Agent
+Categories}), a Group Topic (@pxref{Topic Parameters}), or an
+individual group (@pxref{Group Parameters}).
+
+The one problem common to all users using the agent is how quickly it
+can consume disk space. If you using the agent on many groups, it is
+even more difficult to effectively recover disk space. One solution
+is the @samp{%F} format available in @code{gnus-group-line-format}.
+This format will display the actual disk space used by articles
+fetched into both the agent and cache. By knowing which groups use
+the most space, users know where to focus their efforts when ``agent
+expiring'' articles.
+
+@node Agent as Cache
+@subsection Agent as Cache
+
+When Gnus is plugged, it is not efficient to download headers or
+articles from the server again, if they are already stored in the
+Agent. So, Gnus normally only downloads headers once, and stores them
+in the Agent. These headers are later used when generating the summary
+buffer, regardless of whether you are plugged or unplugged. Articles
+are not cached in the Agent by default though (that would potentially
+consume lots of disk space), but if you have already downloaded an
+article into the Agent, Gnus will not download the article from the
+server again but use the locally stored copy instead.
+
+If you so desire, you can configure the agent (see @code{gnus-agent-cache}
+@pxref{Agent Variables}) to always download headers and articles while
+plugged. Gnus will almost certainly be slower, but it will be kept
+synchronized with the server. That last point probably won't make any
+sense if you are using a nntp or nnimap back end.
-GroupLens is a collaborative filtering system that helps you work
-together with other people to find the quality news articles out of the
-huge volume of news articles generated every day.
+@node Agent Expiry
+@subsection Agent Expiry
-To accomplish this the GroupLens system combines your opinions about
-articles you have already read with the opinions of others who have done
-likewise and gives you a personalized prediction for each unread news
-article. Think of GroupLens as a matchmaker. GroupLens watches how you
-rate articles, and finds other people that rate articles the same way.
-Once it has found some people you agree with it tells you, in the form
-of a prediction, what they thought of the article. You can use this
-prediction to help you decide whether or not you want to read the
-article.
+@vindex gnus-agent-expire-days
+@findex gnus-agent-expire
+@kindex M-x gnus-agent-expire
+@kindex M-x gnus-agent-expire-group
+@findex gnus-agent-expire-group
+@cindex agent expiry
+@cindex Gnus agent expiry
+@cindex expiry
-@menu
-* Using GroupLens:: How to make Gnus use GroupLens.
-* Rating Articles:: Letting GroupLens know how you rate articles.
-* Displaying Predictions:: Displaying predictions given by GroupLens.
-* GroupLens Variables:: Customizing GroupLens.
-@end menu
+The Agent back end, @code{nnagent}, doesn't handle expiry. Well, at
+least it doesn't handle it like other back ends. Instead, there are
+special @code{gnus-agent-expire} and @code{gnus-agent-expire-group}
+commands that will expire all read articles that are older than
+@code{gnus-agent-expire-days} days. They can be run whenever you feel
+that you're running out of space. Neither are particularly fast or
+efficient, and it's not a particularly good idea to interrupt them (with
+@kbd{C-g} or anything else) once you've started one of them.
+Note that other functions, e.g. @code{gnus-request-expire-articles},
+might run @code{gnus-agent-expire} for you to keep the agent
+synchronized with the group.
-@node Using GroupLens
-@subsection Using GroupLens
+The agent parameter @code{agent-enable-expiration} may be used to
+prevent expiration in selected groups.
-To use GroupLens you must register a pseudonym with your local Better
-Bit Bureau (BBB).
-@samp{http://www.cs.umn.edu/Research/GroupLens/bbb.html} is the only
-better bit in town at the moment.
+@vindex gnus-agent-expire-all
+If @code{gnus-agent-expire-all} is non-@code{nil}, the agent
+expiration commands will expire all articles---unread, read, ticked
+and dormant. If @code{nil} (which is the default), only read articles
+are eligible for expiry, and unread, ticked and dormant articles will
+be kept indefinitely.
+
+If you find that some articles eligible for expiry are never expired,
+perhaps some Gnus Agent files are corrupted. There's are special
+commands, @code{gnus-agent-regenerate} and
+@code{gnus-agent-regenerate-group}, to fix possible problems.
+
+@node Agent Regeneration
+@subsection Agent Regeneration
+
+@cindex agent regeneration
+@cindex Gnus agent regeneration
+@cindex regeneration
+
+The local data structures used by @code{nnagent} may become corrupted
+due to certain exceptional conditions. When this happens,
+@code{nnagent} functionality may degrade or even fail. The solution
+to this problem is to repair the local data structures by removing all
+internal inconsistencies.
+
+For example, if your connection to your server is lost while
+downloaded articles into the agent, the local data structures will not
+know about articles successfully downloaded prior to the connection
+failure. Running @code{gnus-agent-regenerate} or
+@code{gnus-agent-regenerate-group} will update the data structures
+such that you don't need to download these articles a second time.
+
+@findex gnus-agent-regenerate
+@kindex M-x gnus-agent-regenerate
+The command @code{gnus-agent-regenerate} will perform
+@code{gnus-agent-regenerate-group} on every agentized group. While
+you can run @code{gnus-agent-regenerate} in any buffer, it is strongly
+recommended that you first close all summary buffers.
+
+@findex gnus-agent-regenerate-group
+@kindex M-x gnus-agent-regenerate-group
+The command @code{gnus-agent-regenerate-group} uses the local copies
+of individual articles to repair the local @acronym{NOV}(header) database. It
+then updates the internal data structures that document which articles
+are stored locally. An optional argument will mark articles in the
+agent as unread.
+
+@node Agent and IMAP
+@subsection Agent and IMAP
+
+The Agent works with any Gnus back end, including nnimap. However,
+since there are some conceptual differences between @acronym{NNTP} and
+@acronym{IMAP}, this section (should) provide you with some information to
+make Gnus Agent work smoother as a @acronym{IMAP} Disconnected Mode client.
+
+The first thing to keep in mind is that all flags (read, ticked, etc)
+are kept on the @acronym{IMAP} server, rather than in @file{.newsrc} as is the
+case for nntp. Thus Gnus need to remember flag changes when
+disconnected, and synchronize these flags when you plug back in.
+
+Gnus keeps track of flag changes when reading nnimap groups under the
+Agent. When you plug back in, Gnus will check if you have any changed
+any flags and ask if you wish to synchronize these with the server.
+The behavior is customizable by @code{gnus-agent-synchronize-flags}.
+
+@vindex gnus-agent-synchronize-flags
+If @code{gnus-agent-synchronize-flags} is @code{nil}, the Agent will
+never automatically synchronize flags. If it is @code{ask}, which is
+the default, the Agent will check if you made any changes and if so
+ask if you wish to synchronize these when you re-connect. If it has
+any other value, all flags will be synchronized automatically.
+
+If you do not wish to synchronize flags automatically when you
+re-connect, you can do it manually with the
+@code{gnus-agent-synchronize-flags} command that is bound to @kbd{J Y}
+in the group buffer.
+
+Some things are currently not implemented in the Agent that you'd might
+expect from a disconnected @acronym{IMAP} client, including:
-Once you have registered you'll need to set a couple of variables.
+@itemize @bullet
-@table @code
+@item
+Copying/moving articles into nnimap groups when unplugged.
-@item gnus-use-grouplens
-@vindex gnus-use-grouplens
-Setting this variable to a non-@code{nil} value will make Gnus hook into
-all the relevant GroupLens functions.
+@item
+Creating/deleting nnimap groups when unplugged.
-@item grouplens-pseudonym
-@vindex grouplens-pseudonym
-This variable should be set to the pseudonym you got when registering
-with the Better Bit Bureau.
+@end itemize
-@item grouplens-newsgroups
-@vindex grouplens-newsgroups
-A list of groups that you want to get GroupLens predictions for.
+Technical note: the synchronization algorithm does not work by ``pushing''
+all local flags to the server, but rather incrementally update the
+server view of flags by changing only those flags that were changed by
+the user. Thus, if you set one flag on an article, quit the group and
+re-select the group and remove the flag; the flag will be set and
+removed from the server when you ``synchronize''. The queued flag
+operations can be found in the per-server @code{flags} file in the Agent
+directory. It's emptied when you synchronize flags.
-@end table
-That's the minimum of what you need to get up and running with GroupLens.
-Once you've registered, GroupLens will start giving you scores for
-articles based on the average of what other people think. But, to get
-the real benefit of GroupLens you need to start rating articles
-yourself. Then the scores GroupLens gives you will be personalized for
-you, based on how the people you usually agree with have already rated.
+@node Outgoing Messages
+@subsection Outgoing Messages
+By default, when Gnus is unplugged, all outgoing messages (both mail
+and news) are stored in the draft group ``queue'' (@pxref{Drafts}).
+You can view them there after posting, and edit them at will.
-@node Rating Articles
-@subsection Rating Articles
+You can control the circumstances under which outgoing mail is queued
+(see @code{gnus-agent-queue-mail}, @pxref{Agent Variables}). Outgoing
+news is always queued when Gnus is unplugged, and never otherwise.
-In GroupLens, an article is rated on a scale from 1 to 5, inclusive.
-Where 1 means something like this article is a waste of bandwidth and 5
-means that the article was really good. The basic question to ask
-yourself is, "on a scale from 1 to 5 would I like to see more articles
-like this one?"
+You can send the messages either from the draft group with the special
+commands available there, or you can use the @kbd{J S} command in the
+group buffer to send all the sendable messages in the draft group.
+Posting news will only work when Gnus is plugged, but you can send
+mail at any time.
-There are four ways to enter a rating for an article in GroupLens.
+If sending mail while unplugged does not work for you and you worry
+about hitting @kbd{J S} by accident when unplugged, you can have Gnus
+ask you to confirm your action (see
+@code{gnus-agent-prompt-send-queue}, @pxref{Agent Variables}).
-@table @kbd
+@node Agent Variables
+@subsection Agent Variables
-@item r
-@kindex r (GroupLens)
-@findex bbb-summary-rate-article
-This function will prompt you for a rating on a scale of one to five.
+@table @code
+@item gnus-agent
+@vindex gnus-agent
+Is the agent enabled? The default is @code{t}. When first enabled,
+the agent will use @code{gnus-agent-auto-agentize-methods} to
+automatically mark some backends as agentized. You may change which
+backends are agentized using the agent commands in the server buffer.
-@item k
-@kindex k (GroupLens)
-@findex grouplens-score-thread
-This function will prompt you for a rating, and rate all the articles in
-the thread. This is really useful for some of those long running giant
-threads in rec.humor.
+To enter the server buffer, use the @kbd{^}
+(@code{gnus-group-enter-server-mode}) command in the group buffer.
-@end table
-The next two commands, @kbd{n} and @kbd{,} take a numerical prefix to be
-the score of the article you're reading.
+@item gnus-agent-directory
+@vindex gnus-agent-directory
+Where the Gnus Agent will store its files. The default is
+@file{~/News/agent/}.
+
+@item gnus-agent-handle-level
+@vindex gnus-agent-handle-level
+Groups on levels (@pxref{Group Levels}) higher than this variable will
+be ignored by the Agent. The default is @code{gnus-level-subscribed},
+which means that only subscribed group will be considered by the Agent
+by default.
-@table @kbd
+@item gnus-agent-plugged-hook
+@vindex gnus-agent-plugged-hook
+Hook run when connecting to the network.
-@item 1-5 n
-@kindex n (GroupLens)
-@findex grouplens-next-unread-article
-Rate the article and go to the next unread article.
+@item gnus-agent-unplugged-hook
+@vindex gnus-agent-unplugged-hook
+Hook run when disconnecting from the network.
-@item 1-5 ,
-@kindex , (GroupLens)
-@findex grouplens-best-unread-article
-Rate the article and go to the next unread article with the highest score.
+@item gnus-agent-fetched-hook
+@vindex gnus-agent-fetched-hook
+Hook run when finished fetching articles.
+
+@item gnus-agent-cache
+@vindex gnus-agent-cache
+Variable to control whether use the locally stored @acronym{NOV} and
+articles when plugged, e.g. essentially using the Agent as a cache.
+The default is non-@code{nil}, which means to use the Agent as a cache.
+
+@item gnus-agent-go-online
+@vindex gnus-agent-go-online
+If @code{gnus-agent-go-online} is @code{nil}, the Agent will never
+automatically switch offline servers into online status. If it is
+@code{ask}, the default, the Agent will ask if you wish to switch
+offline servers into online status when you re-connect. If it has any
+other value, all offline servers will be automatically switched into
+online status.
+
+@item gnus-agent-mark-unread-after-downloaded
+@vindex gnus-agent-mark-unread-after-downloaded
+If @code{gnus-agent-mark-unread-after-downloaded} is non-@code{nil},
+mark articles as unread after downloading. This is usually a safe
+thing to do as the newly downloaded article has obviously not been
+read. The default is t.
+
+@item gnus-agent-consider-all-articles
+@vindex gnus-agent-consider-all-articles
+If @code{gnus-agent-consider-all-articles} is non-@code{nil}, the
+agent will let the agent predicate decide whether articles need to be
+downloaded or not, for all articles. When @code{nil}, the default,
+the agent will only let the predicate decide whether unread articles
+are downloaded or not. If you enable this, you may also want to look
+into the agent expiry settings (@pxref{Category Variables}), so that
+the agent doesn't download articles which the agent will later expire,
+over and over again.
+
+@item gnus-agent-max-fetch-size
+@vindex gnus-agent-max-fetch-size
+The agent fetches articles into a temporary buffer prior to parsing
+them into individual files. To avoid exceeding the max. buffer size,
+the agent alternates between fetching and parsing until all articles
+have been fetched. @code{gnus-agent-max-fetch-size} provides a size
+limit to control how often the cycling occurs. A large value improves
+performance. A small value minimizes the time lost should the
+connection be lost while fetching (You may need to run
+@code{gnus-agent-regenerate-group} to update the group's state.
+However, all articles parsed prior to loosing the connection will be
+available while unplugged). The default is 10M so it is unusual to
+see any cycling.
+
+@item gnus-server-unopen-status
+@vindex gnus-server-unopen-status
+Perhaps not an Agent variable, but closely related to the Agent, this
+variable says what will happen if Gnus cannot open a server. If the
+Agent is enabled, the default, @code{nil}, makes Gnus ask the user
+whether to deny the server or whether to unplug the agent. If the
+Agent is disabled, Gnus always simply deny the server. Other choices
+for this variable include @code{denied} and @code{offline} the latter
+is only valid if the Agent is used.
+
+@item gnus-auto-goto-ignores
+@vindex gnus-auto-goto-ignores
+Another variable that isn't an Agent variable, yet so closely related
+that most will look for it here, this variable tells the summary
+buffer how to maneuver around undownloaded (only headers stored in the
+agent) and unfetched (neither article nor headers stored) articles.
+
+The legal values are @code{nil} (maneuver to any article),
+@code{undownloaded} (maneuvering while unplugged ignores articles that
+have not been fetched), @code{always-undownloaded} (maneuvering always
+ignores articles that have not been fetched), @code{unfetched}
+(maneuvering ignores articles whose headers have not been fetched).
+
+@item gnus-agent-queue-mail
+@vindex gnus-agent-queue-mail
+When @code{gnus-agent-queue-mail} is @code{always}, Gnus will always
+queue mail rather than sending it straight away. When @code{t}, Gnus
+will queue mail when unplugged only. When @code{nil}, never queue
+mail. The default is @code{t}.
+
+@item gnus-agent-prompt-send-queue
+@vindex gnus-agent-prompt-send-queue
+When @code{gnus-agent-prompt-send-queue} is non-@code{nil} Gnus will
+prompt you to confirm that you really wish to proceed if you hit
+@kbd{J S} while unplugged. The default is @code{nil}.
+
+@item gnus-agent-auto-agentize-methods
+@vindex gnus-agent-auto-agentize-methods
+If you have never used the Agent before (or more technically, if
+@file{~/News/agent/lib/servers} does not exist), Gnus will
+automatically agentize a few servers for you. This variable control
+which backends should be auto-agentized. It is typically only useful
+to agentize remote backends. The auto-agentizing has the same effect
+as running @kbd{J a} on the servers (@pxref{Server Agent Commands}).
+If the file exist, you must manage the servers manually by adding or
+removing them, this variable is only applicable the first time you
+start Gnus. The default is @samp{(nntp nnimap)}.
@end table
-If you want to give the current article a score of 4 and then go to the
-next article, just type @kbd{4 n}.
+@node Example Setup
+@subsection Example Setup
-@node Displaying Predictions
-@subsection Displaying Predictions
+If you don't want to read this manual, and you have a fairly standard
+setup, you may be able to use something like the following as your
+@file{~/.gnus.el} file to get started.
-GroupLens makes a prediction for you about how much you will like a
-news article. The predictions from GroupLens are on a scale from 1 to
-5, where 1 is the worst and 5 is the best. You can use the predictions
-from GroupLens in one of three ways controlled by the variable
-@code{gnus-grouplens-override-scoring}.
+@lisp
+;;; @r{Define how Gnus is to fetch news. We do this over @acronym{NNTP}}
+;;; @r{from your ISP's server.}
+(setq gnus-select-method '(nntp "news.your-isp.com"))
-@vindex gnus-grouplens-override-scoring
-There are three ways to display predictions in grouplens. You may
-choose to have the GroupLens scores contribute to, or override the
-regular gnus scoring mechanism. override is the default; however, some
-people prefer to see the Gnus scores plus the grouplens scores. To get
-the separate scoring behavior you need to set
-@code{gnus-grouplens-override-scoring} to @code{'separate}. To have the
-GroupLens predictions combined with the grouplens scores set it to
-@code{'override} and to combine the scores set
-@code{gnus-grouplens-override-scoring} to @code{'combine}. When you use
-the combine option you will also want to set the values for
-@code{grouplens-prediction-offset} and
-@code{grouplens-score-scale-factor}.
+;;; @r{Define how Gnus is to read your mail. We read mail from}
+;;; @r{your ISP's @acronym{POP} server.}
+(setq mail-sources '((pop :server "pop.your-isp.com")))
-@vindex grouplens-prediction-display
-In either case, GroupLens gives you a few choices for how you would like
-to see your predictions displayed. The display of predictions is
-controlled by the @code{grouplens-prediction-display} variable.
+;;; @r{Say how Gnus is to store the mail. We use nnml groups.}
+(setq gnus-secondary-select-methods '((nnml "")))
-The following are valid values for that variable.
+;;; @r{Make Gnus into an offline newsreader.}
+;;; (gnus-agentize) ; @r{The obsolete setting.}
+;;; (setq gnus-agent t) ; @r{Now the default.}
+@end lisp
-@table @code
-@item prediction-spot
-The higher the prediction, the further to the right an @samp{*} is
-displayed.
+That should be it, basically. Put that in your @file{~/.gnus.el} file,
+edit to suit your needs, start up PPP (or whatever), and type @kbd{M-x
+gnus}.
-@item confidence-interval
-A numeric confidence interval.
+If this is the first time you've run Gnus, you will be subscribed
+automatically to a few default newsgroups. You'll probably want to
+subscribe to more groups, and to do that, you have to query the
+@acronym{NNTP} server for a complete list of groups with the @kbd{A A}
+command. This usually takes quite a while, but you only have to do it
+once.
-@item prediction-bar
-The higher the prediction, the longer the bar.
+After reading and parsing a while, you'll be presented with a list of
+groups. Subscribe to the ones you want to read with the @kbd{u}
+command. @kbd{l} to make all the killed groups disappear after you've
+subscribe to all the groups you want to read. (@kbd{A k} will bring
+back all the killed groups.)
-@item confidence-bar
-Numerical confidence.
+You can now read the groups at once, or you can download the articles
+with the @kbd{J s} command. And then read the rest of this manual to
+find out which of the other gazillion things you want to customize.
-@item confidence-spot
-The spot gets bigger with more confidence.
-@item prediction-num
-Plain-old numeric value.
+@node Batching Agents
+@subsection Batching Agents
+@findex gnus-agent-batch
-@item confidence-plus-minus
-Prediction +/- confidence.
+Having the Gnus Agent fetch articles (and post whatever messages you've
+written) is quite easy once you've gotten things set up properly. The
+following shell script will do everything that is necessary:
-@end table
+You can run a complete batch command from the command line with the
+following incantation:
+@example
+#!/bin/sh
+emacs -batch -l ~/.emacs -l ~/.gnus.el gnus-agent-batch >/dev/null 2>&1
+@end example
-@node GroupLens Variables
-@subsection GroupLens Variables
-@table @code
+@node Agent Caveats
+@subsection Agent Caveats
-@item gnus-summary-grouplens-line-format
-The summary line format used in GroupLens-enhanced summary buffers. It
-accepts the same specs as the normal summary line format (@pxref{Summary
-Buffer Lines}). The default is @samp{%U%R%z%l%I%(%[%4L: %-20,20n%]%)
-%s\n}.
+The Gnus Agent doesn't seem to work like most other offline
+newsreaders. Here are some common questions that some imaginary people
+may ask:
-@item grouplens-bbb-host
-Host running the bbbd server. @samp{grouplens.cs.umn.edu} is the
-default.
+@table @dfn
+@item If I read an article while plugged, do they get entered into the Agent?
-@item grouplens-bbb-port
-Port of the host running the bbbd server. The default is 9000.
+@strong{No}. If you want this behaviour, add
+@code{gnus-agent-fetch-selected-article} to
+@code{gnus-select-article-hook}.
-@item grouplens-score-offset
-Offset the prediction by this value. In other words, subtract the
-prediction value by this number to arrive at the effective score. The
-default is 0.
+@item If I read an article while plugged, and the article already exists in
+the Agent, will it get downloaded once more?
-@item grouplens-score-scale-factor
-This variable allows the user to magnify the effect of GroupLens scores.
-The scale factor is applied after the offset. The default is 1.
+@strong{No}, unless @code{gnus-agent-cache} is @code{nil}.
@end table
+In short, when Gnus is unplugged, it only looks into the locally stored
+articles; when it's plugged, it talks to your ISP and may also use the
+locally stored articles.
-@node Advanced Scoring
-@section Advanced Scoring
-Scoring on Subjects and From headers is nice enough, but what if you're
-really interested in what a person has to say only when she's talking
-about a particular subject? Or what if you really don't want to
-read what person A has to say when she's following up to person B, but
-want to read what she says when she's following up to person C?
+@node Scoring
+@chapter Scoring
+@cindex scoring
-By using advanced scoring rules you may create arbitrarily complex
-scoring patterns.
+Other people use @dfn{kill files}, but we here at Gnus Towers like
+scoring better than killing, so we'd rather switch than fight. They do
+something completely different as well, so sit up straight and pay
+attention!
-@menu
-* Advanced Scoring Syntax:: A definition.
-* Advanced Scoring Examples:: What they look like.
-* Advanced Scoring Tips:: Getting the most out of it.
-@end menu
+@vindex gnus-summary-mark-below
+All articles have a default score (@code{gnus-summary-default-score}),
+which is 0 by default. This score may be raised or lowered either
+interactively or by score files. Articles that have a score lower than
+@code{gnus-summary-mark-below} are marked as read.
+Gnus will read any @dfn{score files} that apply to the current group
+before generating the summary buffer.
-@node Advanced Scoring Syntax
-@subsection Advanced Scoring Syntax
+There are several commands in the summary buffer that insert score
+entries based on the current article. You can, for instance, ask Gnus to
+lower or increase the score of all articles with a certain subject.
-Ordinary scoring rules have a string as the first element in the rule.
-Advanced scoring rules have a list as the first element. The second
-element is the score to be applied if the first element evaluated to a
-non-@code{nil} value.
+There are two sorts of scoring entries: Permanent and temporary.
+Temporary score entries are self-expiring entries. Any entries that are
+temporary and have not been used for, say, a week, will be removed
+silently to help keep the sizes of the score files down.
-These lists may consist of three logical operators, one redirection
-operator, and various match operators.
+@menu
+* Summary Score Commands:: Adding score entries for the current group.
+* Group Score Commands:: General score commands.
+* Score Variables:: Customize your scoring. (My, what terminology).
+* Score File Format:: What a score file may contain.
+* Score File Editing:: You can edit score files by hand as well.
+* Adaptive Scoring:: Big Sister Gnus knows what you read.
+* Home Score File:: How to say where new score entries are to go.
+* Followups To Yourself:: Having Gnus notice when people answer you.
+* Scoring On Other Headers:: Scoring on non-standard headers.
+* Scoring Tips:: How to score effectively.
+* Reverse Scoring:: That problem child of old is not problem.
+* Global Score Files:: Earth-spanning, ear-splitting score files.
+* Kill Files:: They are still here, but they can be ignored.
+* Converting Kill Files:: Translating kill files to score files.
+* Advanced Scoring:: Using logical expressions to build score rules.
+* Score Decays:: It can be useful to let scores wither away.
+@end menu
-Logical operators:
-@table @code
-@item &
-@itemx and
-This logical operator will evaluate each of its arguments until it finds
-one that evaluates to @code{false}, and then it'll stop. If all arguments
-evaluate to @code{true} values, then this operator will return
-@code{true}.
+@node Summary Score Commands
+@section Summary Score Commands
+@cindex score commands
-@item |
-@itemx or
-This logical operator will evaluate each of its arguments until it finds
-one that evaluates to @code{true}. If no arguments are @code{true},
-then this operator will return @code{false}.
+The score commands that alter score entries do not actually modify real
+score files. That would be too inefficient. Gnus maintains a cache of
+previously loaded score files, one of which is considered the
+@dfn{current score file alist}. The score commands simply insert
+entries into this list, and upon group exit, this list is saved.
-@item !
-@itemx not
-@itemx ¬
-This logical operator only takes a single argument. It returns the
-logical negation of the value of its argument.
+The current score file is by default the group's local score file, even
+if no such score file actually exists. To insert score commands into
+some other score file (e.g. @file{all.SCORE}), you must first make this
+score file the current one.
-@end table
+General score commands that don't actually change the score file:
-There is an @dfn{indirection operator} that will make its arguments
-apply to the ancestors of the current article being scored. For
-instance, @code{1-} will make score rules apply to the parent of the
-current article. @code{2-} will make score rules apply to the
-grandparent of the current article. Alternatively, you can write
-@code{^^}, where the number of @code{^}s (carets) says how far back into
-the ancestry you want to go.
+@table @kbd
-Finally, we have the match operators. These are the ones that do the
-real work. Match operators are header name strings followed by a match
-and a match type. A typical match operator looks like @samp{("from"
-"Lars Ingebrigtsen" s)}. The header names are the same as when using
-simple scoring, and the match types are also the same.
+@item V s
+@kindex V s (Summary)
+@findex gnus-summary-set-score
+Set the score of the current article (@code{gnus-summary-set-score}).
+@item V S
+@kindex V S (Summary)
+@findex gnus-summary-current-score
+Display the score of the current article
+(@code{gnus-summary-current-score}).
-@node Advanced Scoring Examples
-@subsection Advanced Scoring Examples
+@item V t
+@kindex V t (Summary)
+@findex gnus-score-find-trace
+Display all score rules that have been used on the current article
+(@code{gnus-score-find-trace}). In the @code{*Score Trace*} buffer, you
+may type @kbd{e} to edit score file corresponding to the score rule on
+current line and @kbd{f} to format (@code{gnus-score-pretty-print}) the
+score file and edit it.
-Let's say you want to increase the score of articles written by Lars
-when he's talking about Gnus:
+@item V w
+@kindex V w (Summary)
+@findex gnus-score-find-favourite-words
+List words used in scoring (@code{gnus-score-find-favourite-words}).
-@example
-((&
- ("from" "Lars Ingebrigtsen")
- ("subject" "Gnus"))
- 1000)
-@end example
+@item V R
+@kindex V R (Summary)
+@findex gnus-summary-rescore
+Run the current summary through the scoring process
+(@code{gnus-summary-rescore}). This might be useful if you're playing
+around with your score files behind Gnus' back and want to see the
+effect you're having.
-Quite simple, huh?
+@item V c
+@kindex V c (Summary)
+@findex gnus-score-change-score-file
+Make a different score file the current
+(@code{gnus-score-change-score-file}).
-When he writes long articles, he sometimes has something nice to say:
+@item V e
+@kindex V e (Summary)
+@findex gnus-score-edit-current-scores
+Edit the current score file (@code{gnus-score-edit-current-scores}).
+You will be popped into a @code{gnus-score-mode} buffer (@pxref{Score
+File Editing}).
-@example
-((&
- ("from" "Lars Ingebrigtsen")
- (|
- ("subject" "Gnus")
- ("lines" 100 >)))
- 1000)
-@end example
+@item V f
+@kindex V f (Summary)
+@findex gnus-score-edit-file
+Edit a score file and make this score file the current one
+(@code{gnus-score-edit-file}).
-However, when he responds to things written by Reig Eigil Logge, you
-really don't want to read what he's written:
+@item V F
+@kindex V F (Summary)
+@findex gnus-score-flush-cache
+Flush the score cache (@code{gnus-score-flush-cache}). This is useful
+after editing score files.
-@example
-((&
- ("from" "Lars Ingebrigtsen")
- (1- ("from" "Reig Eigir Logge")))
- -100000)
-@end example
+@item V C
+@kindex V C (Summary)
+@findex gnus-score-customize
+Customize a score file in a visually pleasing manner
+(@code{gnus-score-customize}).
-Everybody that follows up Redmondo when he writes about disappearing
-socks should have their scores raised, but only when they talk about
-white socks. However, when Lars talks about socks, it's usually not
-very interesting:
+@end table
-@example
-((&
- (1-
- (&
- ("from" "redmondo@@.*no" r)
- ("body" "disappearing.*socks" t)))
- (! ("from" "Lars Ingebrigtsen"))
- ("body" "white.*socks"))
- 1000)
-@end example
+The rest of these commands modify the local score file.
-The possibilities are endless.
+@table @kbd
+@item V m
+@kindex V m (Summary)
+@findex gnus-score-set-mark-below
+Prompt for a score, and mark all articles with a score below this as
+read (@code{gnus-score-set-mark-below}).
-@node Advanced Scoring Tips
-@subsection Advanced Scoring Tips
+@item V x
+@kindex V x (Summary)
+@findex gnus-score-set-expunge-below
+Prompt for a score, and add a score rule to the current score file to
+expunge all articles below this score
+(@code{gnus-score-set-expunge-below}).
+@end table
-The @code{&} and @code{|} logical operators do short-circuit logic.
-That is, they stop processing their arguments when it's clear what the
-result of the operation will be. For instance, if one of the arguments
-of an @code{&} evaluates to @code{false}, there's no point in evaluating
-the rest of the arguments. This means that you should put slow matches
-(@samp{body}, @samp{header}) last and quick matches (@samp{from},
-@samp{subject}) first.
+The keystrokes for actually making score entries follow a very regular
+pattern, so there's no need to list all the commands. (Hundreds of
+them.)
-The indirection arguments (@code{1-} and so on) will make their
-arguments work on previous generations of the thread. If you say
-something like:
+@findex gnus-summary-increase-score
+@findex gnus-summary-lower-score
-@example
-...
-(1-
- (1-
- ("from" "lars")))
-...
-@end example
+@enumerate
+@item
+The first key is either @kbd{I} (upper case i) for increasing the score
+or @kbd{L} for lowering the score.
+@item
+The second key says what header you want to score on. The following
+keys are available:
+@table @kbd
-Then that means "score on the from header of the grandparent of the
-current article". An indirection is quite fast, but it's better to say:
+@item a
+Score on the author name.
-@example
-(1-
- (&
- ("from" "Lars")
- ("subject" "Gnus")))
-@end example
+@item s
+Score on the subject line.
-than it is to say:
+@item x
+Score on the @code{Xref} line---i.e., the cross-posting line.
-@example
-(&
- (1- ("from" "Lars"))
- (1- ("subject" "Gnus")))
-@end example
+@item r
+Score on the @code{References} line.
+@item d
+Score on the date.
-@node Score Decays
-@section Score Decays
-@cindex score decays
-@cindex decays
+@item l
+Score on the number of lines.
-You may find that your scores have a tendency to grow without
-bounds, especially if you're using adaptive scoring. If scores get too
-big, they lose all meaning---they simply max out and it's difficult to
-use them in any sensible way.
+@item i
+Score on the @code{Message-ID} header.
-@vindex gnus-decay-scores
-@findex gnus-decay-score
-@vindex gnus-decay-score-function
-Gnus provides a mechanism for decaying scores to help with this problem.
-When score files are loaded and @code{gnus-decay-scores} is
-non-@code{nil}, Gnus will run the score files through the decaying
-mechanism thereby lowering the scores of all non-permanent score rules.
-The decay itself if performed by the @code{gnus-decay-score-function}
-function, which is @code{gnus-decay-score} by default. Here's the
-definition of that function:
+@item e
+Score on an ``extra'' header, that is, one of those in gnus-extra-headers,
+if your @acronym{NNTP} server tracks additional header data in overviews.
-@lisp
-(defun gnus-decay-score (score)
- "Decay SCORE.
-This is done according to `gnus-score-decay-constant'
-and `gnus-score-decay-scale'."
- (floor
- (- score
- (* (if (< score 0) 1 -1)
- (min (abs score)
- (max gnus-score-decay-constant
- (* (abs score)
- gnus-score-decay-scale)))))))
-@end lisp
+@item f
+Score on followups---this matches the author name, and adds scores to
+the followups to this author. (Using this key leads to the creation of
+@file{ADAPT} files.)
-@vindex gnus-score-decay-scale
-@vindex gnus-score-decay-constant
-@code{gnus-score-decay-constant} is 3 by default and
-@code{gnus-score-decay-scale} is 0.05. This should cause the following:
+@item b
+Score on the body.
-@enumerate
-@item
-Scores between -3 and 3 will be set to 0 when this function is called.
+@item h
+Score on the head.
-@item
-Scores with magnitudes between 3 and 60 will be shrunk by 3.
+@item t
+Score on thread. (Using this key leads to the creation of @file{ADAPT}
+files.)
-@item
-Scores with magnitudes greater than 60 will be shrunk by 5% of the
-score.
-@end enumerate
+@end table
-If you don't like this decay function, write your own. It is called
-with the score to be decayed as its only parameter, and it should return
-the new score, which should be an integer.
+@item
+The third key is the match type. Which match types are valid depends on
+what headers you are scoring on.
-Gnus will try to decay scores once a day. If you haven't run Gnus for
-four days, Gnus will decay the scores four times, for instance.
+@table @code
+@item strings
-@node Various
-@chapter Various
+@table @kbd
-@menu
-* Process/Prefix:: A convention used by many treatment commands.
-* Interactive:: Making Gnus ask you many questions.
-* Symbolic Prefixes:: How to supply some Gnus functions with options.
-* Formatting Variables:: You can specify what buffers should look like.
-* Windows Configuration:: Configuring the Gnus buffer windows.
-* Faces and Fonts:: How to change how faces look.
-* Compilation:: How to speed Gnus up.
-* Mode Lines:: Displaying information in the mode lines.
-* Highlighting and Menus:: Making buffers look all nice and cozy.
-* Buttons:: Get tendonitis in ten easy steps!
-* Daemons:: Gnus can do things behind your back.
-* NoCeM:: How to avoid spam and other fatty foods.
-* Undo:: Some actions can be undone.
-* Moderation:: What to do if you're a moderator.
-* XEmacs Enhancements:: There are more pictures and stuff under XEmacs.
-* Fuzzy Matching:: What's the big fuzz?
-* Thwarting Email Spam:: A how-to on avoiding unsolicited commercial email.
-* Various Various:: Things that are really various.
-@end menu
+@item e
+Exact matching.
+@item s
+Substring matching.
-@node Process/Prefix
-@section Process/Prefix
-@cindex process/prefix convention
+@item f
+Fuzzy matching (@pxref{Fuzzy Matching}).
-Many functions, among them functions for moving, decoding and saving
-articles, use what is known as the @dfn{Process/Prefix convention}.
+@item r
+Regexp matching
+@end table
-This is a method for figuring out what articles the user wants the
-command to be performed on.
+@item date
+@table @kbd
-It goes like this:
+@item b
+Before date.
-If the numeric prefix is N, perform the operation on the next N
-articles, starting with the current one. If the numeric prefix is
-negative, perform the operation on the previous N articles, starting
-with the current one.
+@item a
+After date.
-@vindex transient-mark-mode
-If @code{transient-mark-mode} in non-@code{nil} and the region is
-active, all articles in the region will be worked upon.
+@item n
+This date.
+@end table
-If there is no numeric prefix, but some articles are marked with the
-process mark, perform the operation on the articles marked with
-the process mark.
+@item number
+@table @kbd
-If there is neither a numeric prefix nor any articles marked with the
-process mark, just perform the operation on the current article.
+@item <
+Less than number.
-Quite simple, really, but it needs to be made clear so that surprises
-are avoided.
+@item =
+Equal to number.
-Commands that react to the process mark will push the current list of
-process marked articles onto a stack and will then clear all process
-marked articles. You can restore the previous configuration with the
-@kbd{M P y} command (@pxref{Setting Process Marks}).
-
-@vindex gnus-summary-goto-unread
-One thing that seems to shock & horrify lots of people is that, for
-instance, @kbd{3 d} does exactly the same as @kbd{d} @kbd{d} @kbd{d}.
-Since each @kbd{d} (which marks the current article as read) by default
-goes to the next unread article after marking, this means that @kbd{3 d}
-will mark the next three unread articles as read, no matter what the
-summary buffer looks like. Set @code{gnus-summary-goto-unread} to
-@code{nil} for a more straightforward action.
-
-
-@node Interactive
-@section Interactive
-@cindex interaction
-
-@table @code
+@item >
+Greater than number.
+@end table
+@end table
-@item gnus-novice-user
-@vindex gnus-novice-user
-If this variable is non-@code{nil}, you are either a newcomer to the
-World of Usenet, or you are very cautious, which is a nice thing to be,
-really. You will be given questions of the type ``Are you sure you want
-to do this?'' before doing anything dangerous. This is @code{t} by
-default.
+@item
+The fourth and usually final key says whether this is a temporary (i.e.,
+expiring) score entry, or a permanent (i.e., non-expiring) score entry,
+or whether it is to be done immediately, without adding to the score
+file.
+@table @kbd
-@item gnus-expert-user
-@vindex gnus-expert-user
-If this variable is non-@code{nil}, you will seldom be asked any
-questions by Gnus. It will simply assume you know what you're doing, no
-matter how strange.
+@item t
+Temporary score entry.
-@item gnus-interactive-catchup
-@vindex gnus-interactive-catchup
-Require confirmation before catching up a group if non-@code{nil}. It
-is @code{t} by default.
+@item p
+Permanent score entry.
-@item gnus-interactive-exit
-@vindex gnus-interactive-exit
-Require confirmation before exiting Gnus. This variable is @code{t} by
-default.
+@item i
+Immediately scoring.
@end table
+@item
+If you are scoring on `e' (extra) headers, you will then be prompted for
+the header name on which you wish to score. This must be a header named
+in gnus-extra-headers, and @samp{TAB} completion is available.
-@node Symbolic Prefixes
-@section Symbolic Prefixes
-@cindex symbolic prefixes
-
-Quite a lot of Emacs commands react to the (numeric) prefix. For
-instance, @kbd{C-u 4 C-f} moves point four characters forward, and
-@kbd{C-u 9 0 0 I s s p} adds a permanent @code{Subject} substring score
-rule of 900 to the current article.
+@end enumerate
-This is all nice and well, but what if you want to give a command some
-additional information? Well, what most commands do is interpret the
-``raw'' prefix in some special way. @kbd{C-u 0 C-x C-s} means that one
-doesn't want a backup file to be created when saving the current buffer,
-for instance. But what if you want to save without making a backup
-file, and you want Emacs to flash lights and play a nice tune at the
-same time? You can't, and you're probably perfectly happy that way.
+So, let's say you want to increase the score on the current author with
+exact matching permanently: @kbd{I a e p}. If you want to lower the
+score based on the subject line, using substring matching, and make a
+temporary score entry: @kbd{L s s t}. Pretty easy.
-@kindex M-i (Summary)
-@findex gnus-symbolic-argument
-I'm not, so I've added a second prefix---the @dfn{symbolic prefix}. The
-prefix key is @kbd{M-i} (@code{gnus-symbolic-argument}), and the next
-character typed in is the value. You can stack as many @kbd{M-i}
-prefixes as you want. @kbd{M-i a M-C-u} means ``feed the @kbd{M-C-u}
-command the symbolic prefix @code{a}''. @kbd{M-i a M-i b M-C-u} means
-``feed the @kbd{M-C-u} command the symbolic prefixes @code{a} and
-@code{b}''. You get the drift.
+To make things a bit more complicated, there are shortcuts. If you use
+a capital letter on either the second or third keys, Gnus will use
+defaults for the remaining one or two keystrokes. The defaults are
+``substring'' and ``temporary''. So @kbd{I A} is the same as @kbd{I a s
+t}, and @kbd{I a R} is the same as @kbd{I a r t}.
-Typing in symbolic prefixes to commands that don't accept them doesn't
-hurt, but it doesn't do any good either. Currently not many Gnus
-functions make use of the symbolic prefix.
+These functions take both the numerical prefix and the symbolic prefix
+(@pxref{Symbolic Prefixes}). A numerical prefix says how much to lower
+(or increase) the score of the article. A symbolic prefix of @code{a}
+says to use the @file{all.SCORE} file for the command instead of the
+current score file.
-If you're interested in how Gnus implements this, @pxref{Extended
-Interactive}.
+@vindex gnus-score-mimic-keymap
+The @code{gnus-score-mimic-keymap} says whether these commands will
+pretend they are keymaps or not.
-@node Formatting Variables
-@section Formatting Variables
-@cindex formatting variables
+@node Group Score Commands
+@section Group Score Commands
+@cindex group score commands
-Throughout this manual you've probably noticed lots of variables called
-things like @code{gnus-group-line-format} and
-@code{gnus-summary-mode-line-format}. These control how Gnus is to
-output lines in the various buffers. There's quite a lot of them.
-Fortunately, they all use the same syntax, so there's not that much to
-be annoyed by.
+There aren't many of these as yet, I'm afraid.
-Here's an example format spec (from the group buffer): @samp{%M%S%5y:
-%(%g%)\n}. We see that it is indeed extremely ugly, and that there are
-lots of percentages everywhere.
+@table @kbd
-@menu
-* Formatting Basics:: A formatting variable is basically a format string.
-* Mode Line Formatting:: Some rules about mode line formatting variables.
-* Advanced Formatting:: Modifying output in various ways.
-* User-Defined Specs:: Having Gnus call your own functions.
-* Formatting Fonts:: Making the formatting look colorful and nice.
-@end menu
+@item W e
+@kindex W e (Group)
+@findex gnus-score-edit-all-score
+Edit the apply-to-all-groups all.SCORE file. You will be popped into
+a @code{gnus-score-mode} buffer (@pxref{Score File Editing}).
-Currently Gnus uses the following formatting variables:
-@code{gnus-group-line-format}, @code{gnus-summary-line-format},
-@code{gnus-server-line-format}, @code{gnus-topic-line-format},
-@code{gnus-group-mode-line-format},
-@code{gnus-summary-mode-line-format},
-@code{gnus-article-mode-line-format},
-@code{gnus-server-mode-line-format}, and
-@code{gnus-summary-pick-line-format}.
+@item W f
+@kindex W f (Group)
+@findex gnus-score-flush-cache
+Gnus maintains a cache of score alists to avoid having to reload them
+all the time. This command will flush the cache
+(@code{gnus-score-flush-cache}).
-All these format variables can also be arbitrary elisp forms. In that
-case, they will be @code{eval}ed to insert the required lines.
+@end table
-@kindex M-x gnus-update-format
-@findex gnus-update-format
-Gnus includes a command to help you while creating your own format
-specs. @kbd{M-x gnus-update-format} will @code{eval} the current form,
-update the spec in question and pop you to a buffer where you can
-examine the resulting lisp code to be run to generate the line.
+You can do scoring from the command line by saying something like:
+@findex gnus-batch-score
+@cindex batch scoring
+@example
+$ emacs -batch -l ~/.emacs -l ~/.gnus.el -f gnus-batch-score
+@end example
-@node Formatting Basics
-@subsection Formatting Basics
+@node Score Variables
+@section Score Variables
+@cindex score variables
-Each @samp{%} element will be replaced by some string or other when the
-buffer in question is generated. @samp{%5y} means ``insert the @samp{y}
-spec, and pad with spaces to get a 5-character field''.
+@table @code
-As with normal C and Emacs Lisp formatting strings, the numerical
-modifier between the @samp{%} and the formatting type character will
-@dfn{pad} the output so that it is always at least that long.
-@samp{%5y} will make the field always (at least) five characters wide by
-padding with spaces to the left. If you say @samp{%-5y}, it will pad to
-the right instead.
+@item gnus-use-scoring
+@vindex gnus-use-scoring
+If @code{nil}, Gnus will not check for score files, and will not, in
+general, do any score-related work. This is @code{t} by default.
-You may also wish to limit the length of the field to protect against
-particularly wide values. For that you can say @samp{%4,6y}, which
-means that the field will never be more than 6 characters wide and never
-less than 4 characters wide.
+@item gnus-kill-killed
+@vindex gnus-kill-killed
+If this variable is @code{nil}, Gnus will never apply score files to
+articles that have already been through the kill process. While this
+may save you lots of time, it also means that if you apply a kill file
+to a group, and then change the kill file and want to run it over you
+group again to kill more articles, it won't work. You have to set this
+variable to @code{t} to do that. (It is @code{t} by default.)
+@item gnus-kill-files-directory
+@vindex gnus-kill-files-directory
+All kill and score files will be stored in this directory, which is
+initialized from the @env{SAVEDIR} environment variable by default.
+This is @file{~/News/} by default.
-@node Mode Line Formatting
-@subsection Mode Line Formatting
+@item gnus-score-file-suffix
+@vindex gnus-score-file-suffix
+Suffix to add to the group name to arrive at the score file name
+(@file{SCORE} by default.)
-Mode line formatting variables (e.g.,
-@code{gnus-summary-mode-line-format}) follow the same rules as other,
-buffer line oriented formatting variables (@pxref{Formatting Basics})
-with the following two differences:
+@item gnus-score-uncacheable-files
+@vindex gnus-score-uncacheable-files
+@cindex score cache
+All score files are normally cached to avoid excessive re-loading of
+score files. However, if this might make your Emacs grow big and
+bloated, so this regexp can be used to weed out score files unlikely
+to be needed again. It would be a bad idea to deny caching of
+@file{all.SCORE}, while it might be a good idea to not cache
+@file{comp.infosystems.www.authoring.misc.ADAPT}. In fact, this
+variable is @samp{ADAPT$} by default, so no adaptive score files will
+be cached.
-@enumerate
+@item gnus-save-score
+@vindex gnus-save-score
+If you have really complicated score files, and do lots of batch
+scoring, then you might set this variable to @code{t}. This will make
+Gnus save the scores into the @file{.newsrc.eld} file.
-@item
-There must be no newline (@samp{\n}) at the end.
+If you do not set this to @code{t}, then manual scores (like those set
+with @kbd{V s} (@code{gnus-summary-set-score})) will not be preserved
+across group visits.
-@item
-The special @samp{%%b} spec can be used to display the buffer name.
-Well, it's no spec at all, really---@samp{%%} is just a way to quote
-@samp{%} to allow it to pass through the formatting machinery unmangled,
-so that Emacs receives @samp{%b}, which is something the Emacs mode line
-display interprets to mean ``show the buffer name''. For a full list of
-mode line specs Emacs understands, see the documentation of the
-@code{mode-line-format} variable.
+@item gnus-score-interactive-default-score
+@vindex gnus-score-interactive-default-score
+Score used by all the interactive raise/lower commands to raise/lower
+score with. Default is 1000, which may seem excessive, but this is to
+ensure that the adaptive scoring scheme gets enough room to play with.
+We don't want the small changes from the adaptive scoring to overwrite
+manually entered data.
-@end enumerate
+@item gnus-summary-default-score
+@vindex gnus-summary-default-score
+Default score of an article, which is 0 by default.
+@item gnus-summary-expunge-below
+@vindex gnus-summary-expunge-below
+Don't display the summary lines of articles that have scores lower than
+this variable. This is @code{nil} by default, which means that no
+articles will be hidden. This variable is local to the summary buffers,
+and has to be set from @code{gnus-summary-mode-hook}.
-@node Advanced Formatting
-@subsection Advanced Formatting
+@item gnus-score-over-mark
+@vindex gnus-score-over-mark
+Mark (in the third column) used for articles with a score over the
+default. Default is @samp{+}.
-It is frequently useful to post-process the fields in some way.
-Padding, limiting, cutting off parts and suppressing certain values can
-be achieved by using @dfn{tilde modifiers}. A typical tilde spec might
-look like @samp{%~(cut 3)~(ignore "0")y}.
+@item gnus-score-below-mark
+@vindex gnus-score-below-mark
+Mark (in the third column) used for articles with a score below the
+default. Default is @samp{-}.
-These are the valid modifiers:
+@item gnus-score-find-score-files-function
+@vindex gnus-score-find-score-files-function
+Function used to find score files for the current group. This function
+is called with the name of the group as the argument.
+Predefined functions available are:
@table @code
-@item pad
-@itemx pad-left
-Pad the field to the left with spaces until it reaches the required
-length.
-@item pad-right
-Pad the field to the right with spaces until it reaches the required
-length.
-
-@item max
-@itemx max-left
-Cut off characters from the left until it reaches the specified length.
+@item gnus-score-find-single
+@findex gnus-score-find-single
+Only apply the group's own score file.
-@item max-right
-Cut off characters from the right until it reaches the specified
-length.
+@item gnus-score-find-bnews
+@findex gnus-score-find-bnews
+Apply all score files that match, using bnews syntax. This is the
+default. If the current group is @samp{gnu.emacs.gnus}, for instance,
+@file{all.emacs.all.SCORE}, @file{not.alt.all.SCORE} and
+@file{gnu.all.SCORE} would all apply. In short, the instances of
+@samp{all} in the score file names are translated into @samp{.*}, and
+then a regexp match is done.
-@item cut
-@itemx cut-left
-Cut off the specified number of characters from the left.
+This means that if you have some score entries that you want to apply to
+all groups, then you put those entries in the @file{all.SCORE} file.
-@item cut-right
-Cut off the specified number of characters from the right.
+The score files are applied in a semi-random order, although Gnus will
+try to apply the more general score files before the more specific score
+files. It does this by looking at the number of elements in the score
+file names---discarding the @samp{all} elements.
-@item ignore
-Return an empty string if the field is equal to the specified value.
+@item gnus-score-find-hierarchical
+@findex gnus-score-find-hierarchical
+Apply all score files from all the parent groups. This means that you
+can't have score files like @file{all.SCORE}, but you can have
+@file{SCORE}, @file{comp.SCORE} and @file{comp.emacs.SCORE} for each
+server.
-@item form
-Use the specified form as the field value when the @samp{@@} spec is
-used.
@end table
+This variable can also be a list of functions. In that case, all
+these functions will be called with the group name as argument, and
+all the returned lists of score files will be applied. These
+functions can also return lists of lists of score alists directly. In
+that case, the functions that return these non-file score alists
+should probably be placed before the ``real'' score file functions, to
+ensure that the last score file returned is the local score file.
+Phu.
+
+For example, to do hierarchical scoring but use a non-server-specific
+overall score file, you could use the value
+@example
+(list (lambda (group) ("all.SCORE"))
+ 'gnus-score-find-hierarchical)
+@end example
-Let's take an example. The @samp{%o} spec in the summary mode lines
-will return a date in compact ISO8601 format---@samp{19960809T230410}.
-This is quite a mouthful, so we want to shave off the century number and
-the time, leaving us with a six-character date. That would be
-@samp{%~(cut-left 2)~(max-right 6)~(pad 6)o}. (Cutting is done before
-maxing, and we need the padding to ensure that the date is never less
-than 6 characters to make it look nice in columns.)
-
-Ignoring is done first; then cutting; then maxing; and then as the very
-last operation, padding.
-
-If you use lots of these advanced thingies, you'll find that Gnus gets
-quite slow. This can be helped enormously by running @kbd{M-x
-gnus-compile} when you are satisfied with the look of your lines.
-@xref{Compilation}.
-
-
-@node User-Defined Specs
-@subsection User-Defined Specs
+@item gnus-score-expiry-days
+@vindex gnus-score-expiry-days
+This variable says how many days should pass before an unused score file
+entry is expired. If this variable is @code{nil}, no score file entries
+are expired. It's 7 by default.
-All the specs allow for inserting user defined specifiers---@samp{u}.
-The next character in the format string should be a letter. Gnus
-will call the function @code{gnus-user-format-function-}@samp{X}, where
-@samp{X} is the letter following @samp{%u}. The function will be passed
-a single parameter---what the parameter means depends on what buffer
-it's being called from. The function should return a string, which will
-be inserted into the buffer just like information from any other
-specifier. This function may also be called with dummy values, so it
-should protect against that.
+@item gnus-update-score-entry-dates
+@vindex gnus-update-score-entry-dates
+If this variable is non-@code{nil}, temporary score entries that have
+been triggered (matched) will have their dates updated. (This is how Gnus
+controls expiry---all non-matched-entries will become too old while
+matched entries will stay fresh and young.) However, if you set this
+variable to @code{nil}, even matched entries will grow old and will
+have to face that oh-so grim reaper.
-You can also use tilde modifiers (@pxref{Advanced Formatting} to achieve
-much the same without defining new functions. Here's an example:
-@samp{%~(form (count-lines (point-min) (point)))@@}. The form
-given here will be evaluated to yield the current line number, and then
-inserted.
+@item gnus-score-after-write-file-function
+@vindex gnus-score-after-write-file-function
+Function called with the name of the score file just written.
+@item gnus-score-thread-simplify
+@vindex gnus-score-thread-simplify
+If this variable is non-@code{nil}, article subjects will be
+simplified for subject scoring purposes in the same manner as with
+threading---according to the current value of
+@code{gnus-simplify-subject-functions}. If the scoring entry uses
+@code{substring} or @code{exact} matching, the match will also be
+simplified in this manner.
-@node Formatting Fonts
-@subsection Formatting Fonts
+@end table
-There are specs for highlighting, and these are shared by all the format
-variables. Text inside the @samp{%(} and @samp{%)} specifiers will get
-the special @code{mouse-face} property set, which means that it will be
-highlighted (with @code{gnus-mouse-face}) when you put the mouse pointer
-over it.
-Text inside the @samp{%@{} and @samp{%@}} specifiers will have their
-normal faces set using @code{gnus-face-0}, which is @code{bold} by
-default. If you say @samp{%1@{}, you'll get @code{gnus-face-1} instead,
-and so on. Create as many faces as you wish. The same goes for the
-@code{mouse-face} specs---you can say @samp{%3(hello%)} to have
-@samp{hello} mouse-highlighted with @code{gnus-mouse-face-3}.
+@node Score File Format
+@section Score File Format
+@cindex score file format
-Text inside the @samp{%<} and @samp{%>} specifiers will get the special
-@code{balloon-help} property set to @code{gnus-balloon-face-0}. If you say
-@samp{%1<}, you'll get @code{gnus-balloon-face-1} and so on. The
-@code{gnus-balloon-face-*} variables should be either strings or
-symbols naming functions that return a string. Under @code{balloon-help-mode},
-when the mouse passes over text with this property set, a balloon window
-will appear and display the string. Please refer to the doc string of
-@code{balloon-help-mode} for more information on this.
+A score file is an @code{emacs-lisp} file that normally contains just a
+single form. Casual users are not expected to edit these files;
+everything can be changed from the summary buffer.
-Here's an alternative recipe for the group buffer:
+Anyway, if you'd like to dig into it yourself, here's an example:
@lisp
-;; Create three face types.
-(setq gnus-face-1 'bold)
-(setq gnus-face-3 'italic)
-
-;; We want the article count to be in
-;; a bold and green face. So we create
-;; a new face called `my-green-bold'.
-(copy-face 'bold 'my-green-bold)
-;; Set the color.
-(set-face-foreground 'my-green-bold "ForestGreen")
-(setq gnus-face-2 'my-green-bold)
-
-;; Set the new & fancy format.
-(setq gnus-group-line-format
- "%M%S%3@{%5y%@}%2[:%] %(%1@{%g%@}%)\n")
+(("from"
+ ("Lars Ingebrigtsen" -10000)
+ ("Per Abrahamsen")
+ ("larsi\\|lmi" -50000 nil R))
+ ("subject"
+ ("Ding is Badd" nil 728373))
+ ("xref"
+ ("alt.politics" -1000 728372 s))
+ ("lines"
+ (2 -100 nil <))
+ (mark 0)
+ (expunge -1000)
+ (mark-and-expunge -10)
+ (read-only nil)
+ (orphan -10)
+ (adapt t)
+ (files "/hom/larsi/News/gnu.SCORE")
+ (exclude-files "all.SCORE")
+ (local (gnus-newsgroup-auto-expire t)
+ (gnus-summary-make-false-root empty))
+ (eval (ding)))
@end lisp
-I'm sure you'll be able to use this scheme to create totally unreadable
-and extremely vulgar displays. Have fun!
+This example demonstrates most score file elements. @xref{Advanced
+Scoring}, for a different approach.
-Note that the @samp{%(} specs (and friends) do not make any sense on the
-mode-line variables.
+Even though this looks much like Lisp code, nothing here is actually
+@code{eval}ed. The Lisp reader is used to read this form, though, so it
+has to be valid syntactically, if not semantically.
+Six keys are supported by this alist:
-@node Windows Configuration
-@section Windows Configuration
-@cindex windows configuration
+@table @code
-No, there's nothing here about X, so be quiet.
+@item STRING
+If the key is a string, it is the name of the header to perform the
+match on. Scoring can only be performed on these eight headers:
+@code{From}, @code{Subject}, @code{References}, @code{Message-ID},
+@code{Xref}, @code{Lines}, @code{Chars} and @code{Date}. In addition to
+these headers, there are three strings to tell Gnus to fetch the entire
+article and do the match on larger parts of the article: @code{Body}
+will perform the match on the body of the article, @code{Head} will
+perform the match on the head of the article, and @code{All} will
+perform the match on the entire article. Note that using any of these
+last three keys will slow down group entry @emph{considerably}. The
+final ``header'' you can score on is @code{Followup}. These score
+entries will result in new score entries being added for all follow-ups
+to articles that matches these score entries.
-@vindex gnus-use-full-window
-If @code{gnus-use-full-window} non-@code{nil}, Gnus will delete all
-other windows and occupy the entire Emacs screen by itself. It is
-@code{t} by default.
+Following this key is an arbitrary number of score entries, where each
+score entry has one to four elements.
+@enumerate
-Setting this variable to @code{nil} kinda works, but there are
-glitches. Use at your own peril.
+@item
+The first element is the @dfn{match element}. On most headers this will
+be a string, but on the Lines and Chars headers, this must be an
+integer.
-@vindex gnus-buffer-configuration
-@code{gnus-buffer-configuration} describes how much space each Gnus
-buffer should be given. Here's an excerpt of this variable:
+@item
+If the second element is present, it should be a number---the @dfn{score
+element}. This number should be an integer in the neginf to posinf
+interval. This number is added to the score of the article if the match
+is successful. If this element is not present, the
+@code{gnus-score-interactive-default-score} number will be used
+instead. This is 1000 by default.
-@lisp
-((group (vertical 1.0 (group 1.0 point)
- (if gnus-carpal (group-carpal 4))))
- (article (vertical 1.0 (summary 0.25 point)
- (article 1.0))))
-@end lisp
+@item
+If the third element is present, it should be a number---the @dfn{date
+element}. This date says when the last time this score entry matched,
+which provides a mechanism for expiring the score entries. It this
+element is not present, the score entry is permanent. The date is
+represented by the number of days since December 31, 1 BCE.
-This is an alist. The @dfn{key} is a symbol that names some action or
-other. For instance, when displaying the group buffer, the window
-configuration function will use @code{group} as the key. A full list of
-possible names is listed below.
+@item
+If the fourth element is present, it should be a symbol---the @dfn{type
+element}. This element specifies what function should be used to see
+whether this score entry matches the article. What match types that can
+be used depends on what header you wish to perform the match on.
+@table @dfn
-The @dfn{value} (i.e., the @dfn{split}) says how much space each buffer
-should occupy. To take the @code{article} split as an example -
+@item From, Subject, References, Xref, Message-ID
+For most header types, there are the @code{r} and @code{R} (regexp), as
+well as @code{s} and @code{S} (substring) types, and @code{e} and
+@code{E} (exact match), and @code{w} (word match) types. If this
+element is not present, Gnus will assume that substring matching should
+be used. @code{R}, @code{S}, and @code{E} differ from the others in
+that the matches will be done in a case-sensitive manner. All these
+one-letter types are really just abbreviations for the @code{regexp},
+@code{string}, @code{exact}, and @code{word} types, which you can use
+instead, if you feel like.
+
+@item Extra
+Just as for the standard string overview headers, if you are using
+gnus-extra-headers, you can score on these headers' values. In this
+case, there is a 5th element in the score entry, being the name of the
+header to be scored. The following entry is useful in your
+@file{all.SCORE} file in case of spam attacks from a single origin
+host, if your @acronym{NNTP} server tracks @samp{NNTP-Posting-Host} in
+overviews:
@lisp
-(article (vertical 1.0 (summary 0.25 point)
- (article 1.0)))
+("111.222.333.444" -1000 nil s
+ "NNTP-Posting-Host")
@end lisp
-This @dfn{split} says that the summary buffer should occupy 25% of upper
-half of the screen, and that it is placed over the article buffer. As
-you may have noticed, 100% + 25% is actually 125% (yup, I saw y'all
-reaching for that calculator there). However, the special number
-@code{1.0} is used to signal that this buffer should soak up all the
-rest of the space available after the rest of the buffers have taken
-whatever they need. There should be only one buffer with the @code{1.0}
-size spec per split.
+@item Lines, Chars
+These two headers use different match types: @code{<}, @code{>},
+@code{=}, @code{>=} and @code{<=}.
-Point will be put in the buffer that has the optional third element
-@code{point}. In a @code{frame} split, the last subsplit having a leaf
-split where the tag @code{frame-focus} is a member (i.e. is the third or
-fourth element in the list, depending on whether the @code{point} tag is
-present) gets focus.
+These predicates are true if
-Here's a more complicated example:
+@example
+(PREDICATE HEADER MATCH)
+@end example
+
+evaluates to non-@code{nil}. For instance, the advanced match
+@code{("lines" 4 <)} (@pxref{Advanced Scoring}) will result in the
+following form:
@lisp
-(article (vertical 1.0 (group 4)
- (summary 0.25 point)
- (if gnus-carpal (summary-carpal 4))
- (article 1.0)))
+(< header-value 4)
@end lisp
-If the size spec is an integer instead of a floating point number,
-then that number will be used to say how many lines a buffer should
-occupy, not a percentage.
-
-If the @dfn{split} looks like something that can be @code{eval}ed (to be
-precise---if the @code{car} of the split is a function or a subr), this
+Or to put it another way: When using @code{<} on @code{Lines} with 4 as
+the match, we get the score added if the article has less than 4 lines.
+(It's easy to get confused and think it's the other way around. But
+it's not. I think.)
+
+When matching on @code{Lines}, be careful because some back ends (like
+@code{nndir}) do not generate @code{Lines} header, so every article ends
+up being marked as having 0 lines. This can lead to strange results if
+you happen to lower score of the articles with few lines.
+
+@item Date
+For the Date header we have three kinda silly match types:
+@code{before}, @code{at} and @code{after}. I can't really imagine this
+ever being useful, but, like, it would feel kinda silly not to provide
+this function. Just in case. You never know. Better safe than sorry.
+Once burnt, twice shy. Don't judge a book by its cover. Never not have
+sex on a first date. (I have been told that at least one person, and I
+quote, ``found this function indispensable'', however.)
+
+@cindex ISO8601
+@cindex date
+A more useful match type is @code{regexp}. With it, you can match the
+date string using a regular expression. The date is normalized to
+ISO8601 compact format first---@var{YYYYMMDD}@code{T}@var{HHMMSS}. If
+you want to match all articles that have been posted on April 1st in
+every year, you could use @samp{....0401.........} as a match string,
+for instance. (Note that the date is kept in its original time zone, so
+this will match articles that were posted when it was April 1st where
+the article was posted from. Time zones are such wholesome fun for the
+whole family, eh?)
+
+@item Head, Body, All
+These three match keys use the same match types as the @code{From} (etc)
+header uses.
+
+@item Followup
+This match key is somewhat special, in that it will match the
+@code{From} header, and affect the score of not only the matching
+articles, but also all followups to the matching articles. This allows
+you e.g. increase the score of followups to your own articles, or
+decrease the score of followups to the articles of some known
+trouble-maker. Uses the same match types as the @code{From} header
+uses. (Using this match key will lead to creation of @file{ADAPT}
+files.)
+
+@item Thread
+This match key works along the same lines as the @code{Followup} match
+key. If you say that you want to score on a (sub-)thread started by an
+article with a @code{Message-ID} @var{x}, then you add a @samp{thread}
+match. This will add a new @samp{thread} match for each article that
+has @var{x} in its @code{References} header. (These new @samp{thread}
+matches will use the @code{Message-ID}s of these matching articles.)
+This will ensure that you can raise/lower the score of an entire thread,
+even though some articles in the thread may not have complete
+@code{References} headers. Note that using this may lead to
+undeterministic scores of the articles in the thread. (Using this match
+key will lead to creation of @file{ADAPT} files.)
+@end table
+@end enumerate
+
+@cindex score file atoms
+@item mark
+The value of this entry should be a number. Any articles with a score
+lower than this number will be marked as read.
+
+@item expunge
+The value of this entry should be a number. Any articles with a score
+lower than this number will be removed from the summary buffer.
+
+@item mark-and-expunge
+The value of this entry should be a number. Any articles with a score
+lower than this number will be marked as read and removed from the
+summary buffer.
+
+@item thread-mark-and-expunge
+The value of this entry should be a number. All articles that belong to
+a thread that has a total score below this number will be marked as read
+and removed from the summary buffer. @code{gnus-thread-score-function}
+says how to compute the total score for a thread.
+
+@item files
+The value of this entry should be any number of file names. These files
+are assumed to be score files as well, and will be loaded the same way
+this one was.
+
+@item exclude-files
+The clue of this entry should be any number of files. These files will
+not be loaded, even though they would normally be so, for some reason or
+other.
+
+@item eval
+The value of this entry will be @code{eval}el. This element will be
+ignored when handling global score files.
+
+@item read-only
+Read-only score files will not be updated or saved. Global score files
+should feature this atom (@pxref{Global Score Files}). (Note:
+@dfn{Global} here really means @dfn{global}; not your personal
+apply-to-all-groups score files.)
+
+@item orphan
+The value of this entry should be a number. Articles that do not have
+parents will get this number added to their scores. Imagine you follow
+some high-volume newsgroup, like @samp{comp.lang.c}. Most likely you
+will only follow a few of the threads, also want to see any new threads.
+
+You can do this with the following two score file entries:
+
+@example
+ (orphan -500)
+ (mark-and-expunge -100)
+@end example
+
+When you enter the group the first time, you will only see the new
+threads. You then raise the score of the threads that you find
+interesting (with @kbd{I T} or @kbd{I S}), and ignore (@kbd{C y}) the
+rest. Next time you enter the group, you will see new articles in the
+interesting threads, plus any new threads.
+
+I.e.---the orphan score atom is for high-volume groups where a few
+interesting threads which can't be found automatically by ordinary
+scoring rules exist.
+
+@item adapt
+This entry controls the adaptive scoring. If it is @code{t}, the
+default adaptive scoring rules will be used. If it is @code{ignore}, no
+adaptive scoring will be performed on this group. If it is a list, this
+list will be used as the adaptive scoring rules. If it isn't present,
+or is something other than @code{t} or @code{ignore}, the default
+adaptive scoring rules will be used. If you want to use adaptive
+scoring on most groups, you'd set @code{gnus-use-adaptive-scoring} to
+@code{t}, and insert an @code{(adapt ignore)} in the groups where you do
+not want adaptive scoring. If you only want adaptive scoring in a few
+groups, you'd set @code{gnus-use-adaptive-scoring} to @code{nil}, and
+insert @code{(adapt t)} in the score files of the groups where you want
+it.
+
+@item adapt-file
+All adaptive score entries will go to the file named by this entry. It
+will also be applied when entering the group. This atom might be handy
+if you want to adapt on several groups at once, using the same adaptive
+file for a number of groups.
+
+@item local
+@cindex local variables
+The value of this entry should be a list of @code{(@var{var}
+@var{value})} pairs. Each @var{var} will be made buffer-local to the
+current summary buffer, and set to the value specified. This is a
+convenient, if somewhat strange, way of setting variables in some
+groups if you don't like hooks much. Note that the @var{value} won't
+be evaluated.
+@end table
+
+
+@node Score File Editing
+@section Score File Editing
+
+You normally enter all scoring commands from the summary buffer, but you
+might feel the urge to edit them by hand as well, so we've supplied you
+with a mode for that.
+
+It's simply a slightly customized @code{emacs-lisp} mode, with these
+additional commands:
+
+@table @kbd
+
+@item C-c C-c
+@kindex C-c C-c (Score)
+@findex gnus-score-edit-done
+Save the changes you have made and return to the summary buffer
+(@code{gnus-score-edit-done}).
+
+@item C-c C-d
+@kindex C-c C-d (Score)
+@findex gnus-score-edit-insert-date
+Insert the current date in numerical format
+(@code{gnus-score-edit-insert-date}). This is really the day number, if
+you were wondering.
+
+@item C-c C-p
+@kindex C-c C-p (Score)
+@findex gnus-score-pretty-print
+The adaptive score files are saved in an unformatted fashion. If you
+intend to read one of these files, you want to @dfn{pretty print} it
+first. This command (@code{gnus-score-pretty-print}) does that for
+you.
+
+@end table
+
+Type @kbd{M-x gnus-score-mode} to use this mode.
+
+@vindex gnus-score-mode-hook
+@code{gnus-score-menu-hook} is run in score mode buffers.
+
+In the summary buffer you can use commands like @kbd{V f}, @kbd{V e} and
+@kbd{V t} to begin editing score files.
+
+
+@node Adaptive Scoring
+@section Adaptive Scoring
+@cindex adaptive scoring
+
+If all this scoring is getting you down, Gnus has a way of making it all
+happen automatically---as if by magic. Or rather, as if by artificial
+stupidity, to be precise.
+
+@vindex gnus-use-adaptive-scoring
+When you read an article, or mark an article as read, or kill an
+article, you leave marks behind. On exit from the group, Gnus can sniff
+these marks and add score elements depending on what marks it finds.
+You turn on this ability by setting @code{gnus-use-adaptive-scoring} to
+@code{t} or @code{(line)}. If you want score adaptively on separate
+words appearing in the subjects, you should set this variable to
+@code{(word)}. If you want to use both adaptive methods, set this
+variable to @code{(word line)}.
+
+@vindex gnus-default-adaptive-score-alist
+To give you complete control over the scoring process, you can customize
+the @code{gnus-default-adaptive-score-alist} variable. For instance, it
+might look something like this:
+
+@lisp
+(setq gnus-default-adaptive-score-alist
+ '((gnus-unread-mark)
+ (gnus-ticked-mark (from 4))
+ (gnus-dormant-mark (from 5))
+ (gnus-del-mark (from -4) (subject -1))
+ (gnus-read-mark (from 4) (subject 2))
+ (gnus-expirable-mark (from -1) (subject -1))
+ (gnus-killed-mark (from -1) (subject -3))
+ (gnus-kill-file-mark)
+ (gnus-ancient-mark)
+ (gnus-low-score-mark)
+ (gnus-catchup-mark (from -1) (subject -1))))
+@end lisp
+
+As you see, each element in this alist has a mark as a key (either a
+variable name or a ``real'' mark---a character). Following this key is
+a arbitrary number of header/score pairs. If there are no header/score
+pairs following the key, no adaptive scoring will be done on articles
+that have that key as the article mark. For instance, articles with
+@code{gnus-unread-mark} in the example above will not get adaptive score
+entries.
+
+Each article can have only one mark, so just a single of these rules
+will be applied to each article.
+
+To take @code{gnus-del-mark} as an example---this alist says that all
+articles that have that mark (i.e., are marked with @samp{e}) will have a
+score entry added to lower based on the @code{From} header by -4, and
+lowered by @code{Subject} by -1. Change this to fit your prejudices.
+
+If you have marked 10 articles with the same subject with
+@code{gnus-del-mark}, the rule for that mark will be applied ten times.
+That means that that subject will get a score of ten times -1, which
+should be, unless I'm much mistaken, -10.
+
+If you have auto-expirable (mail) groups (@pxref{Expiring Mail}), all
+the read articles will be marked with the @samp{E} mark. This'll
+probably make adaptive scoring slightly impossible, so auto-expiring and
+adaptive scoring doesn't really mix very well.
+
+The headers you can score on are @code{from}, @code{subject},
+@code{message-id}, @code{references}, @code{xref}, @code{lines},
+@code{chars} and @code{date}. In addition, you can score on
+@code{followup}, which will create an adaptive score entry that matches
+on the @code{References} header using the @code{Message-ID} of the
+current article, thereby matching the following thread.
+
+If you use this scheme, you should set the score file atom @code{mark}
+to something small---like -300, perhaps, to avoid having small random
+changes result in articles getting marked as read.
+
+After using adaptive scoring for a week or so, Gnus should start to
+become properly trained and enhance the authors you like best, and kill
+the authors you like least, without you having to say so explicitly.
+
+You can control what groups the adaptive scoring is to be performed on
+by using the score files (@pxref{Score File Format}). This will also
+let you use different rules in different groups.
+
+@vindex gnus-adaptive-file-suffix
+The adaptive score entries will be put into a file where the name is the
+group name with @code{gnus-adaptive-file-suffix} appended. The default
+is @file{ADAPT}.
+
+@vindex gnus-score-exact-adapt-limit
+When doing adaptive scoring, substring or fuzzy matching would probably
+give you the best results in most cases. However, if the header one
+matches is short, the possibility for false positives is great, so if
+the length of the match is less than
+@code{gnus-score-exact-adapt-limit}, exact matching will be used. If
+this variable is @code{nil}, exact matching will always be used to avoid
+this problem.
+
+@vindex gnus-default-adaptive-word-score-alist
+As mentioned above, you can adapt either on individual words or entire
+headers. If you adapt on words, the
+@code{gnus-default-adaptive-word-score-alist} variable says what score
+each instance of a word should add given a mark.
+
+@lisp
+(setq gnus-default-adaptive-word-score-alist
+ `((,gnus-read-mark . 30)
+ (,gnus-catchup-mark . -10)
+ (,gnus-killed-mark . -20)
+ (,gnus-del-mark . -15)))
+@end lisp
+
+This is the default value. If you have adaption on words enabled, every
+word that appears in subjects of articles marked with
+@code{gnus-read-mark} will result in a score rule that increase the
+score with 30 points.
+
+@vindex gnus-default-ignored-adaptive-words
+@vindex gnus-ignored-adaptive-words
+Words that appear in the @code{gnus-default-ignored-adaptive-words} list
+will be ignored. If you wish to add more words to be ignored, use the
+@code{gnus-ignored-adaptive-words} list instead.
+
+@vindex gnus-adaptive-word-length-limit
+Some may feel that short words shouldn't count when doing adaptive
+scoring. If so, you may set @code{gnus-adaptive-word-length-limit} to
+an integer. Words shorter than this number will be ignored. This
+variable defaults to @code{nil}.
+
+@vindex gnus-adaptive-word-syntax-table
+When the scoring is done, @code{gnus-adaptive-word-syntax-table} is the
+syntax table in effect. It is similar to the standard syntax table, but
+it considers numbers to be non-word-constituent characters.
+
+@vindex gnus-adaptive-word-minimum
+If @code{gnus-adaptive-word-minimum} is set to a number, the adaptive
+word scoring process will never bring down the score of an article to
+below this number. The default is @code{nil}.
+
+@vindex gnus-adaptive-word-no-group-words
+If @code{gnus-adaptive-word-no-group-words} is set to @code{t}, gnus
+won't adaptively word score any of the words in the group name. Useful
+for groups like @samp{comp.editors.emacs}, where most of the subject
+lines contain the word @samp{emacs}.
+
+After using this scheme for a while, it might be nice to write a
+@code{gnus-psychoanalyze-user} command to go through the rules and see
+what words you like and what words you don't like. Or perhaps not.
+
+Note that the adaptive word scoring thing is highly experimental and is
+likely to change in the future. Initial impressions seem to indicate
+that it's totally useless as it stands. Some more work (involving more
+rigorous statistical methods) will have to be done to make this useful.
+
+
+@node Home Score File
+@section Home Score File
+
+The score file where new score file entries will go is called the
+@dfn{home score file}. This is normally (and by default) the score file
+for the group itself. For instance, the home score file for
+@samp{gnu.emacs.gnus} is @file{gnu.emacs.gnus.SCORE}.
+
+However, this may not be what you want. It is often convenient to share
+a common home score file among many groups---all @samp{emacs} groups
+could perhaps use the same home score file.
+
+@vindex gnus-home-score-file
+The variable that controls this is @code{gnus-home-score-file}. It can
+be:
+
+@enumerate
+@item
+A string. Then this file will be used as the home score file for all
+groups.
+
+@item
+A function. The result of this function will be used as the home score
+file. The function will be called with the name of the group as the
+parameter.
+
+@item
+A list. The elements in this list can be:
+
+@enumerate
+@item
+@code{(@var{regexp} @var{file-name})}. If the @var{regexp} matches the
+group name, the @var{file-name} will be used as the home score file.
+
+@item
+A function. If the function returns non-@code{nil}, the result will
+be used as the home score file.
+
+@item
+A string. Use the string as the home score file.
+@end enumerate
+
+The list will be traversed from the beginning towards the end looking
+for matches.
+
+@end enumerate
+
+So, if you want to use just a single score file, you could say:
+
+@lisp
+(setq gnus-home-score-file
+ "my-total-score-file.SCORE")
+@end lisp
+
+If you want to use @file{gnu.SCORE} for all @samp{gnu} groups and
+@file{rec.SCORE} for all @samp{rec} groups (and so on), you can say:
+
+@findex gnus-hierarchial-home-score-file
+@lisp
+(setq gnus-home-score-file
+ 'gnus-hierarchial-home-score-file)
+@end lisp
+
+This is a ready-made function provided for your convenience.
+Other functions include
+
+@table @code
+@item gnus-current-home-score-file
+@findex gnus-current-home-score-file
+Return the ``current'' regular score file. This will make scoring
+commands add entry to the ``innermost'' matching score file.
+
+@end table
+
+If you want to have one score file for the @samp{emacs} groups and
+another for the @samp{comp} groups, while letting all other groups use
+their own home score files:
+
+@lisp
+(setq gnus-home-score-file
+ ;; @r{All groups that match the regexp @code{"\\.emacs"}}
+ '(("\\.emacs" "emacs.SCORE")
+ ;; @r{All the comp groups in one score file}
+ ("^comp" "comp.SCORE")))
+@end lisp
+
+@vindex gnus-home-adapt-file
+@code{gnus-home-adapt-file} works exactly the same way as
+@code{gnus-home-score-file}, but says what the home adaptive score file
+is instead. All new adaptive file entries will go into the file
+specified by this variable, and the same syntax is allowed.
+
+In addition to using @code{gnus-home-score-file} and
+@code{gnus-home-adapt-file}, you can also use group parameters
+(@pxref{Group Parameters}) and topic parameters (@pxref{Topic
+Parameters}) to achieve much the same. Group and topic parameters take
+precedence over this variable.
+
+
+@node Followups To Yourself
+@section Followups To Yourself
+
+Gnus offers two commands for picking out the @code{Message-ID} header in
+the current buffer. Gnus will then add a score rule that scores using
+this @code{Message-ID} on the @code{References} header of other
+articles. This will, in effect, increase the score of all articles that
+respond to the article in the current buffer. Quite useful if you want
+to easily note when people answer what you've said.
+
+@table @code
+
+@item gnus-score-followup-article
+@findex gnus-score-followup-article
+This will add a score to articles that directly follow up your own
+article.
+
+@item gnus-score-followup-thread
+@findex gnus-score-followup-thread
+This will add a score to all articles that appear in a thread ``below''
+your own article.
+@end table
+
+@vindex message-sent-hook
+These two functions are both primarily meant to be used in hooks like
+@code{message-sent-hook}, like this:
+@lisp
+(add-hook 'message-sent-hook 'gnus-score-followup-thread)
+@end lisp
+
+
+If you look closely at your own @code{Message-ID}, you'll notice that
+the first two or three characters are always the same. Here's two of
+mine:
+
+@example
+<x6u3u47icf.fsf@@eyesore.no>
+<x6sp9o7ibw.fsf@@eyesore.no>
+@end example
+
+So ``my'' ident on this machine is @samp{x6}. This can be
+exploited---the following rule will raise the score on all followups to
+myself:
+
+@lisp
+("references"
+ ("<x6[0-9a-z]+\\.fsf\\(_-_\\)?@@.*eyesore\\.no>"
+ 1000 nil r))
+@end lisp
+
+Whether it's the first two or first three characters that are ``yours''
+is system-dependent.
+
+
+@node Scoring On Other Headers
+@section Scoring On Other Headers
+@cindex scoring on other headers
+
+Gnus is quite fast when scoring the ``traditional''
+headers---@samp{From}, @samp{Subject} and so on. However, scoring
+other headers requires writing a @code{head} scoring rule, which means
+that Gnus has to request every single article from the back end to find
+matches. This takes a long time in big groups.
+
+Now, there's not much you can do about this for news groups, but for
+mail groups, you have greater control. In @ref{To From Newsgroups},
+it's explained in greater detail what this mechanism does, but here's
+a cookbook example for @code{nnml} on how to allow scoring on the
+@samp{To} and @samp{Cc} headers.
+
+Put the following in your @file{~/.gnus.el} file.
+
+@lisp
+(setq gnus-extra-headers '(To Cc Newsgroups Keywords)
+ nnmail-extra-headers gnus-extra-headers)
+@end lisp
+
+Restart Gnus and rebuild your @code{nnml} overview files with the
+@kbd{M-x nnml-generate-nov-databases} command. This will take a long
+time if you have much mail.
+
+Now you can score on @samp{To} and @samp{Cc} as ``extra headers'' like
+so: @kbd{I e s p To RET <your name> RET}.
+
+See? Simple.
+
+
+@node Scoring Tips
+@section Scoring Tips
+@cindex scoring tips
+
+@table @dfn
+
+@item Crossposts
+@cindex crossposts
+@cindex scoring crossposts
+If you want to lower the score of crossposts, the line to match on is
+the @code{Xref} header.
+@lisp
+("xref" (" talk.politics.misc:" -1000))
+@end lisp
+
+@item Multiple crossposts
+If you want to lower the score of articles that have been crossposted to
+more than, say, 3 groups:
+@lisp
+("xref"
+ ("[^:\n]+:[0-9]+ +[^:\n]+:[0-9]+ +[^:\n]+:[0-9]+"
+ -1000 nil r))
+@end lisp
+
+@item Matching on the body
+This is generally not a very good idea---it takes a very long time.
+Gnus actually has to fetch each individual article from the server. But
+you might want to anyway, I guess. Even though there are three match
+keys (@code{Head}, @code{Body} and @code{All}), you should choose one
+and stick with it in each score file. If you use any two, each article
+will be fetched @emph{twice}. If you want to match a bit on the
+@code{Head} and a bit on the @code{Body}, just use @code{All} for all
+the matches.
+
+@item Marking as read
+You will probably want to mark articles that have scores below a certain
+number as read. This is most easily achieved by putting the following
+in your @file{all.SCORE} file:
+@lisp
+((mark -100))
+@end lisp
+You may also consider doing something similar with @code{expunge}.
+
+@item Negated character classes
+If you say stuff like @code{[^abcd]*}, you may get unexpected results.
+That will match newlines, which might lead to, well, The Unknown. Say
+@code{[^abcd\n]*} instead.
+@end table
+
+
+@node Reverse Scoring
+@section Reverse Scoring
+@cindex reverse scoring
+
+If you want to keep just articles that have @samp{Sex with Emacs} in the
+subject header, and expunge all other articles, you could put something
+like this in your score file:
+
+@lisp
+(("subject"
+ ("Sex with Emacs" 2))
+ (mark 1)
+ (expunge 1))
+@end lisp
+
+So, you raise all articles that match @samp{Sex with Emacs} and mark the
+rest as read, and expunge them to boot.
+
+
+@node Global Score Files
+@section Global Score Files
+@cindex global score files
+
+Sure, other newsreaders have ``global kill files''. These are usually
+nothing more than a single kill file that applies to all groups, stored
+in the user's home directory. Bah! Puny, weak newsreaders!
+
+What I'm talking about here are Global Score Files. Score files from
+all over the world, from users everywhere, uniting all nations in one
+big, happy score file union! Ange-score! New and untested!
+
+@vindex gnus-global-score-files
+All you have to do to use other people's score files is to set the
+@code{gnus-global-score-files} variable. One entry for each score file,
+or each score file directory. Gnus will decide by itself what score
+files are applicable to which group.
+
+To use the score file
+@file{/ftp@@ftp.gnus.org:/pub/larsi/ding/score/soc.motss.SCORE} and
+all score files in the @file{/ftp@@ftp.some-where:/pub/score} directory,
+say this:
+
+@lisp
+(setq gnus-global-score-files
+ '("/ftp@@ftp.gnus.org:/pub/larsi/ding/score/soc.motss.SCORE"
+ "/ftp@@ftp.some-where:/pub/score/"))
+@end lisp
+
+@findex gnus-score-search-global-directories
+@noindent
+Simple, eh? Directory names must end with a @samp{/}. These
+directories are typically scanned only once during each Gnus session.
+If you feel the need to manually re-scan the remote directories, you can
+use the @code{gnus-score-search-global-directories} command.
+
+Note that, at present, using this option will slow down group entry
+somewhat. (That is---a lot.)
+
+If you want to start maintaining score files for other people to use,
+just put your score file up for anonymous ftp and announce it to the
+world. Become a retro-moderator! Participate in the retro-moderator
+wars sure to ensue, where retro-moderators battle it out for the
+sympathy of the people, luring them to use their score files on false
+premises! Yay! The net is saved!
+
+Here are some tips for the would-be retro-moderator, off the top of my
+head:
+
+@itemize @bullet
+
+@item
+Articles heavily crossposted are probably junk.
+@item
+To lower a single inappropriate article, lower by @code{Message-ID}.
+@item
+Particularly brilliant authors can be raised on a permanent basis.
+@item
+Authors that repeatedly post off-charter for the group can safely be
+lowered out of existence.
+@item
+Set the @code{mark} and @code{expunge} atoms to obliterate the nastiest
+articles completely.
+
+@item
+Use expiring score entries to keep the size of the file down. You
+should probably have a long expiry period, though, as some sites keep
+old articles for a long time.
+@end itemize
+
+@dots{} I wonder whether other newsreaders will support global score files
+in the future. @emph{Snicker}. Yup, any day now, newsreaders like Blue
+Wave, xrn and 1stReader are bound to implement scoring. Should we start
+holding our breath yet?
+
+
+@node Kill Files
+@section Kill Files
+@cindex kill files
+
+Gnus still supports those pesky old kill files. In fact, the kill file
+entries can now be expiring, which is something I wrote before Daniel
+Quinlan thought of doing score files, so I've left the code in there.
+
+In short, kill processing is a lot slower (and I do mean @emph{a lot})
+than score processing, so it might be a good idea to rewrite your kill
+files into score files.
+
+Anyway, a kill file is a normal @code{emacs-lisp} file. You can put any
+forms into this file, which means that you can use kill files as some
+sort of primitive hook function to be run on group entry, even though
+that isn't a very good idea.
+
+Normal kill files look like this:
+
+@lisp
+(gnus-kill "From" "Lars Ingebrigtsen")
+(gnus-kill "Subject" "ding")
+(gnus-expunge "X")
+@end lisp
+
+This will mark every article written by me as read, and remove the
+marked articles from the summary buffer. Very useful, you'll agree.
+
+Other programs use a totally different kill file syntax. If Gnus
+encounters what looks like a @code{rn} kill file, it will take a stab at
+interpreting it.
+
+Two summary functions for editing a @sc{gnus} kill file:
+
+@table @kbd
+
+@item M-k
+@kindex M-k (Summary)
+@findex gnus-summary-edit-local-kill
+Edit this group's kill file (@code{gnus-summary-edit-local-kill}).
+
+@item M-K
+@kindex M-K (Summary)
+@findex gnus-summary-edit-global-kill
+Edit the general kill file (@code{gnus-summary-edit-global-kill}).
+@end table
+
+Two group mode functions for editing the kill files:
+
+@table @kbd
+
+@item M-k
+@kindex M-k (Group)
+@findex gnus-group-edit-local-kill
+Edit this group's kill file (@code{gnus-group-edit-local-kill}).
+
+@item M-K
+@kindex M-K (Group)
+@findex gnus-group-edit-global-kill
+Edit the general kill file (@code{gnus-group-edit-global-kill}).
+@end table
+
+Kill file variables:
+
+@table @code
+@item gnus-kill-file-name
+@vindex gnus-kill-file-name
+A kill file for the group @samp{soc.motss} is normally called
+@file{soc.motss.KILL}. The suffix appended to the group name to get
+this file name is detailed by the @code{gnus-kill-file-name} variable.
+The ``global'' kill file (not in the score file sense of ``global'', of
+course) is just called @file{KILL}.
+
+@vindex gnus-kill-save-kill-file
+@item gnus-kill-save-kill-file
+If this variable is non-@code{nil}, Gnus will save the
+kill file after processing, which is necessary if you use expiring
+kills.
+
+@item gnus-apply-kill-hook
+@vindex gnus-apply-kill-hook
+@findex gnus-apply-kill-file-unless-scored
+@findex gnus-apply-kill-file
+A hook called to apply kill files to a group. It is
+@code{(gnus-apply-kill-file)} by default. If you want to ignore the
+kill file if you have a score file for the same group, you can set this
+hook to @code{(gnus-apply-kill-file-unless-scored)}. If you don't want
+kill files to be processed, you should set this variable to @code{nil}.
+
+@item gnus-kill-file-mode-hook
+@vindex gnus-kill-file-mode-hook
+A hook called in kill-file mode buffers.
+
+@end table
+
+
+@node Converting Kill Files
+@section Converting Kill Files
+@cindex kill files
+@cindex converting kill files
+
+If you have loads of old kill files, you may want to convert them into
+score files. If they are ``regular'', you can use
+the @file{gnus-kill-to-score.el} package; if not, you'll have to do it
+by hand.
+
+The kill to score conversion package isn't included in Gnus by default.
+You can fetch it from
+@uref{http://www.stud.ifi.uio.no/~larsi/ding-various/gnus-kill-to-score.el}.
+
+If your old kill files are very complex---if they contain more
+non-@code{gnus-kill} forms than not, you'll have to convert them by
+hand. Or just let them be as they are. Gnus will still use them as
+before.
+
+
+@node Advanced Scoring
+@section Advanced Scoring
+
+Scoring on Subjects and From headers is nice enough, but what if you're
+really interested in what a person has to say only when she's talking
+about a particular subject? Or what if you really don't want to
+read what person A has to say when she's following up to person B, but
+want to read what she says when she's following up to person C?
+
+By using advanced scoring rules you may create arbitrarily complex
+scoring patterns.
+
+@menu
+* Advanced Scoring Syntax:: A definition.
+* Advanced Scoring Examples:: What they look like.
+* Advanced Scoring Tips:: Getting the most out of it.
+@end menu
+
+
+@node Advanced Scoring Syntax
+@subsection Advanced Scoring Syntax
+
+Ordinary scoring rules have a string as the first element in the rule.
+Advanced scoring rules have a list as the first element. The second
+element is the score to be applied if the first element evaluated to a
+non-@code{nil} value.
+
+These lists may consist of three logical operators, one redirection
+operator, and various match operators.
+
+Logical operators:
+
+@table @code
+@item &
+@itemx and
+This logical operator will evaluate each of its arguments until it finds
+one that evaluates to @code{false}, and then it'll stop. If all arguments
+evaluate to @code{true} values, then this operator will return
+@code{true}.
+
+@item |
+@itemx or
+This logical operator will evaluate each of its arguments until it finds
+one that evaluates to @code{true}. If no arguments are @code{true},
+then this operator will return @code{false}.
+
+@item !
+@itemx not
+@itemx ¬
+This logical operator only takes a single argument. It returns the
+logical negation of the value of its argument.
+
+@end table
+
+There is an @dfn{indirection operator} that will make its arguments
+apply to the ancestors of the current article being scored. For
+instance, @code{1-} will make score rules apply to the parent of the
+current article. @code{2-} will make score rules apply to the
+grandparent of the current article. Alternatively, you can write
+@code{^^}, where the number of @code{^}s (carets) says how far back into
+the ancestry you want to go.
+
+Finally, we have the match operators. These are the ones that do the
+real work. Match operators are header name strings followed by a match
+and a match type. A typical match operator looks like @samp{("from"
+"Lars Ingebrigtsen" s)}. The header names are the same as when using
+simple scoring, and the match types are also the same.
+
+
+@node Advanced Scoring Examples
+@subsection Advanced Scoring Examples
+
+Please note that the following examples are score file rules. To
+make a complete score file from them, surround them with another pair
+of parentheses.
+
+Let's say you want to increase the score of articles written by Lars
+when he's talking about Gnus:
+
+@example
+@group
+((&
+ ("from" "Lars Ingebrigtsen")
+ ("subject" "Gnus"))
+ 1000)
+@end group
+@end example
+
+Quite simple, huh?
+
+When he writes long articles, he sometimes has something nice to say:
+
+@example
+((&
+ ("from" "Lars Ingebrigtsen")
+ (|
+ ("subject" "Gnus")
+ ("lines" 100 >)))
+ 1000)
+@end example
+
+However, when he responds to things written by Reig Eigil Logge, you
+really don't want to read what he's written:
+
+@example
+((&
+ ("from" "Lars Ingebrigtsen")
+ (1- ("from" "Reig Eigir Logge")))
+ -100000)
+@end example
+
+Everybody that follows up Redmondo when he writes about disappearing
+socks should have their scores raised, but only when they talk about
+white socks. However, when Lars talks about socks, it's usually not
+very interesting:
+
+@example
+((&
+ (1-
+ (&
+ ("from" "redmondo@@.*no" r)
+ ("body" "disappearing.*socks" t)))
+ (! ("from" "Lars Ingebrigtsen"))
+ ("body" "white.*socks"))
+ 1000)
+@end example
+
+The possibilities are endless.
+
+
+@node Advanced Scoring Tips
+@subsection Advanced Scoring Tips
+
+The @code{&} and @code{|} logical operators do short-circuit logic.
+That is, they stop processing their arguments when it's clear what the
+result of the operation will be. For instance, if one of the arguments
+of an @code{&} evaluates to @code{false}, there's no point in evaluating
+the rest of the arguments. This means that you should put slow matches
+(@samp{body}, @samp{header}) last and quick matches (@samp{from},
+@samp{subject}) first.
+
+The indirection arguments (@code{1-} and so on) will make their
+arguments work on previous generations of the thread. If you say
+something like:
+
+@example
+...
+(1-
+ (1-
+ ("from" "lars")))
+...
+@end example
+
+Then that means "score on the from header of the grandparent of the
+current article". An indirection is quite fast, but it's better to say:
+
+@example
+(1-
+ (&
+ ("from" "Lars")
+ ("subject" "Gnus")))
+@end example
+
+than it is to say:
+
+@example
+(&
+ (1- ("from" "Lars"))
+ (1- ("subject" "Gnus")))
+@end example
+
+
+@node Score Decays
+@section Score Decays
+@cindex score decays
+@cindex decays
+
+You may find that your scores have a tendency to grow without
+bounds, especially if you're using adaptive scoring. If scores get too
+big, they lose all meaning---they simply max out and it's difficult to
+use them in any sensible way.
+
+@vindex gnus-decay-scores
+@findex gnus-decay-score
+@vindex gnus-decay-score-function
+Gnus provides a mechanism for decaying scores to help with this problem.
+When score files are loaded and @code{gnus-decay-scores} is
+non-@code{nil}, Gnus will run the score files through the decaying
+mechanism thereby lowering the scores of all non-permanent score rules.
+The decay itself if performed by the @code{gnus-decay-score-function}
+function, which is @code{gnus-decay-score} by default. Here's the
+definition of that function:
+
+@lisp
+(defun gnus-decay-score (score)
+ "Decay SCORE according to `gnus-score-decay-constant'
+and `gnus-score-decay-scale'."
+ (let ((n (- score
+ (* (if (< score 0) -1 1)
+ (min (abs score)
+ (max gnus-score-decay-constant
+ (* (abs score)
+ gnus-score-decay-scale)))))))
+ (if (and (featurep 'xemacs)
+ ;; XEmacs' floor can handle only the floating point
+ ;; number below the half of the maximum integer.
+ (> (abs n) (lsh -1 -2)))
+ (string-to-number
+ (car (split-string (number-to-string n) "\\.")))
+ (floor n))))
+@end lisp
+
+@vindex gnus-score-decay-scale
+@vindex gnus-score-decay-constant
+@code{gnus-score-decay-constant} is 3 by default and
+@code{gnus-score-decay-scale} is 0.05. This should cause the following:
+
+@enumerate
+@item
+Scores between -3 and 3 will be set to 0 when this function is called.
+
+@item
+Scores with magnitudes between 3 and 60 will be shrunk by 3.
+
+@item
+Scores with magnitudes greater than 60 will be shrunk by 5% of the
+score.
+@end enumerate
+
+If you don't like this decay function, write your own. It is called
+with the score to be decayed as its only parameter, and it should return
+the new score, which should be an integer.
+
+Gnus will try to decay scores once a day. If you haven't run Gnus for
+four days, Gnus will decay the scores four times, for instance.
+
+@iftex
+@iflatex
+@chapter Message
+@include message.texi
+@chapter Emacs MIME
+@include emacs-mime.texi
+@chapter Sieve
+@include sieve.texi
+@c @chapter PGG
+@c @include pgg.texi
+@c @chapter SASL
+@c @include sasl.texi
+@end iflatex
+@end iftex
+
+@node Various
+@chapter Various
+
+@menu
+* Process/Prefix:: A convention used by many treatment commands.
+* Interactive:: Making Gnus ask you many questions.
+* Symbolic Prefixes:: How to supply some Gnus functions with options.
+* Formatting Variables:: You can specify what buffers should look like.
+* Window Layout:: Configuring the Gnus buffer windows.
+* Faces and Fonts:: How to change how faces look.
+* Compilation:: How to speed Gnus up.
+* Mode Lines:: Displaying information in the mode lines.
+* Highlighting and Menus:: Making buffers look all nice and cozy.
+* Buttons:: Get tendinitis in ten easy steps!
+* Daemons:: Gnus can do things behind your back.
+* NoCeM:: How to avoid spam and other fatty foods.
+* Undo:: Some actions can be undone.
+* Predicate Specifiers:: Specifying predicates.
+* Moderation:: What to do if you're a moderator.
+* Image Enhancements:: Modern versions of Emacs/XEmacs can display images.
+* Fuzzy Matching:: What's the big fuzz?
+* Thwarting Email Spam:: A how-to on avoiding unsolicited commercial email.
+* Other modes:: Interaction with other modes.
+* Various Various:: Things that are really various.
+@end menu
+
+
+@node Process/Prefix
+@section Process/Prefix
+@cindex process/prefix convention
+
+Many functions, among them functions for moving, decoding and saving
+articles, use what is known as the @dfn{Process/Prefix convention}.
+
+This is a method for figuring out what articles the user wants the
+command to be performed on.
+
+It goes like this:
+
+If the numeric prefix is N, perform the operation on the next N
+articles, starting with the current one. If the numeric prefix is
+negative, perform the operation on the previous N articles, starting
+with the current one.
+
+@vindex transient-mark-mode
+If @code{transient-mark-mode} in non-@code{nil} and the region is
+active, all articles in the region will be worked upon.
+
+If there is no numeric prefix, but some articles are marked with the
+process mark, perform the operation on the articles marked with
+the process mark.
+
+If there is neither a numeric prefix nor any articles marked with the
+process mark, just perform the operation on the current article.
+
+Quite simple, really, but it needs to be made clear so that surprises
+are avoided.
+
+Commands that react to the process mark will push the current list of
+process marked articles onto a stack and will then clear all process
+marked articles. You can restore the previous configuration with the
+@kbd{M P y} command (@pxref{Setting Process Marks}).
+
+@vindex gnus-summary-goto-unread
+One thing that seems to shock & horrify lots of people is that, for
+instance, @kbd{3 d} does exactly the same as @kbd{d} @kbd{d} @kbd{d}.
+Since each @kbd{d} (which marks the current article as read) by default
+goes to the next unread article after marking, this means that @kbd{3 d}
+will mark the next three unread articles as read, no matter what the
+summary buffer looks like. Set @code{gnus-summary-goto-unread} to
+@code{nil} for a more straightforward action.
+
+Many commands do not use the process/prefix convention. All commands
+that do explicitly say so in this manual. To apply the process/prefix
+convention to commands that do not use it, you can use the @kbd{M-&}
+command. For instance, to mark all the articles in the group as
+expirable, you could say @kbd{M P b M-& E}.
+
+
+@node Interactive
+@section Interactive
+@cindex interaction
+
+@table @code
+
+@item gnus-novice-user
+@vindex gnus-novice-user
+If this variable is non-@code{nil}, you are either a newcomer to the
+World of Usenet, or you are very cautious, which is a nice thing to be,
+really. You will be given questions of the type ``Are you sure you want
+to do this?'' before doing anything dangerous. This is @code{t} by
+default.
+
+@item gnus-expert-user
+@vindex gnus-expert-user
+If this variable is non-@code{nil}, you will seldom be asked any
+questions by Gnus. It will simply assume you know what you're doing, no
+matter how strange.
+
+@item gnus-interactive-catchup
+@vindex gnus-interactive-catchup
+Require confirmation before catching up a group if non-@code{nil}. It
+is @code{t} by default.
+
+@item gnus-interactive-exit
+@vindex gnus-interactive-exit
+Require confirmation before exiting Gnus. This variable is @code{t} by
+default.
+@end table
+
+
+@node Symbolic Prefixes
+@section Symbolic Prefixes
+@cindex symbolic prefixes
+
+Quite a lot of Emacs commands react to the (numeric) prefix. For
+instance, @kbd{C-u 4 C-f} moves point four characters forward, and
+@kbd{C-u 9 0 0 I s s p} adds a permanent @code{Subject} substring score
+rule of 900 to the current article.
+
+This is all nice and well, but what if you want to give a command some
+additional information? Well, what most commands do is interpret the
+``raw'' prefix in some special way. @kbd{C-u 0 C-x C-s} means that one
+doesn't want a backup file to be created when saving the current buffer,
+for instance. But what if you want to save without making a backup
+file, and you want Emacs to flash lights and play a nice tune at the
+same time? You can't, and you're probably perfectly happy that way.
+
+@kindex M-i (Summary)
+@findex gnus-symbolic-argument
+I'm not, so I've added a second prefix---the @dfn{symbolic prefix}. The
+prefix key is @kbd{M-i} (@code{gnus-symbolic-argument}), and the next
+character typed in is the value. You can stack as many @kbd{M-i}
+prefixes as you want. @kbd{M-i a C-M-u} means ``feed the @kbd{C-M-u}
+command the symbolic prefix @code{a}''. @kbd{M-i a M-i b C-M-u} means
+``feed the @kbd{C-M-u} command the symbolic prefixes @code{a} and
+@code{b}''. You get the drift.
+
+Typing in symbolic prefixes to commands that don't accept them doesn't
+hurt, but it doesn't do any good either. Currently not many Gnus
+functions make use of the symbolic prefix.
+
+If you're interested in how Gnus implements this, @pxref{Extended
+Interactive}.
+
+
+@node Formatting Variables
+@section Formatting Variables
+@cindex formatting variables
+
+Throughout this manual you've probably noticed lots of variables called
+things like @code{gnus-group-line-format} and
+@code{gnus-summary-mode-line-format}. These control how Gnus is to
+output lines in the various buffers. There's quite a lot of them.
+Fortunately, they all use the same syntax, so there's not that much to
+be annoyed by.
+
+Here's an example format spec (from the group buffer): @samp{%M%S%5y:
+%(%g%)\n}. We see that it is indeed extremely ugly, and that there are
+lots of percentages everywhere.
+
+@menu
+* Formatting Basics:: A formatting variable is basically a format string.
+* Mode Line Formatting:: Some rules about mode line formatting variables.
+* Advanced Formatting:: Modifying output in various ways.
+* User-Defined Specs:: Having Gnus call your own functions.
+* Formatting Fonts:: Making the formatting look colorful and nice.
+* Positioning Point:: Moving point to a position after an operation.
+* Tabulation:: Tabulating your output.
+* Wide Characters:: Dealing with wide characters.
+@end menu
+
+Currently Gnus uses the following formatting variables:
+@code{gnus-group-line-format}, @code{gnus-summary-line-format},
+@code{gnus-server-line-format}, @code{gnus-topic-line-format},
+@code{gnus-group-mode-line-format},
+@code{gnus-summary-mode-line-format},
+@code{gnus-article-mode-line-format},
+@code{gnus-server-mode-line-format}, and
+@code{gnus-summary-pick-line-format}.
+
+All these format variables can also be arbitrary elisp forms. In that
+case, they will be @code{eval}ed to insert the required lines.
+
+@kindex M-x gnus-update-format
+@findex gnus-update-format
+Gnus includes a command to help you while creating your own format
+specs. @kbd{M-x gnus-update-format} will @code{eval} the current form,
+update the spec in question and pop you to a buffer where you can
+examine the resulting Lisp code to be run to generate the line.
+
+
+
+@node Formatting Basics
+@subsection Formatting Basics
+
+Each @samp{%} element will be replaced by some string or other when the
+buffer in question is generated. @samp{%5y} means ``insert the @samp{y}
+spec, and pad with spaces to get a 5-character field''.
+
+As with normal C and Emacs Lisp formatting strings, the numerical
+modifier between the @samp{%} and the formatting type character will
+@dfn{pad} the output so that it is always at least that long.
+@samp{%5y} will make the field always (at least) five characters wide by
+padding with spaces to the left. If you say @samp{%-5y}, it will pad to
+the right instead.
+
+You may also wish to limit the length of the field to protect against
+particularly wide values. For that you can say @samp{%4,6y}, which
+means that the field will never be more than 6 characters wide and never
+less than 4 characters wide.
+
+Also Gnus supports some extended format specifications, such as
+@samp{%&user-date;}.
+
+
+@node Mode Line Formatting
+@subsection Mode Line Formatting
+
+Mode line formatting variables (e.g.,
+@code{gnus-summary-mode-line-format}) follow the same rules as other,
+buffer line oriented formatting variables (@pxref{Formatting Basics})
+with the following two differences:
+
+@enumerate
+
+@item
+There must be no newline (@samp{\n}) at the end.
+
+@item
+The special @samp{%%b} spec can be used to display the buffer name.
+Well, it's no spec at all, really---@samp{%%} is just a way to quote
+@samp{%} to allow it to pass through the formatting machinery unmangled,
+so that Emacs receives @samp{%b}, which is something the Emacs mode line
+display interprets to mean ``show the buffer name''. For a full list of
+mode line specs Emacs understands, see the documentation of the
+@code{mode-line-format} variable.
+
+@end enumerate
+
+
+@node Advanced Formatting
+@subsection Advanced Formatting
+
+It is frequently useful to post-process the fields in some way.
+Padding, limiting, cutting off parts and suppressing certain values can
+be achieved by using @dfn{tilde modifiers}. A typical tilde spec might
+look like @samp{%~(cut 3)~(ignore "0")y}.
+
+These are the valid modifiers:
+
+@table @code
+@item pad
+@itemx pad-left
+Pad the field to the left with spaces until it reaches the required
+length.
+
+@item pad-right
+Pad the field to the right with spaces until it reaches the required
+length.
+
+@item max
+@itemx max-left
+Cut off characters from the left until it reaches the specified length.
+
+@item max-right
+Cut off characters from the right until it reaches the specified
+length.
+
+@item cut
+@itemx cut-left
+Cut off the specified number of characters from the left.
+
+@item cut-right
+Cut off the specified number of characters from the right.
+
+@item ignore
+Return an empty string if the field is equal to the specified value.
+
+@item form
+Use the specified form as the field value when the @samp{@@} spec is
+used.
+
+Here's an example:
+
+@lisp
+"~(form (current-time-string))@@"
+@end lisp
+
+@end table
+
+Let's take an example. The @samp{%o} spec in the summary mode lines
+will return a date in compact ISO8601 format---@samp{19960809T230410}.
+This is quite a mouthful, so we want to shave off the century number and
+the time, leaving us with a six-character date. That would be
+@samp{%~(cut-left 2)~(max-right 6)~(pad 6)o}. (Cutting is done before
+maxing, and we need the padding to ensure that the date is never less
+than 6 characters to make it look nice in columns.)
+
+Ignoring is done first; then cutting; then maxing; and then as the very
+last operation, padding.
+
+@vindex gnus-compile-user-specs
+If @code{gnus-compile-user-specs} is set to @code{nil} (@code{t} by
+default) with your strong personality, and use a lots of these advanced
+thingies, you'll find that Gnus gets quite slow. This can be helped
+enormously by running @kbd{M-x gnus-compile} when you are satisfied with
+the look of your lines.
+@xref{Compilation}.
+
+
+@node User-Defined Specs
+@subsection User-Defined Specs
+
+All the specs allow for inserting user defined specifiers---@samp{u}.
+The next character in the format string should be a letter. Gnus
+will call the function @code{gnus-user-format-function-}@samp{X}, where
+@samp{X} is the letter following @samp{%u}. The function will be passed
+a single parameter---what the parameter means depends on what buffer
+it's being called from. The function should return a string, which will
+be inserted into the buffer just like information from any other
+specifier. This function may also be called with dummy values, so it
+should protect against that.
+
+Also Gnus supports extended user-defined specs, such as @samp{%u&foo;}.
+Gnus will call the function @code{gnus-user-format-function-}@samp{foo}.
+
+You can also use tilde modifiers (@pxref{Advanced Formatting} to achieve
+much the same without defining new functions. Here's an example:
+@samp{%~(form (count-lines (point-min) (point)))@@}. The form
+given here will be evaluated to yield the current line number, and then
+inserted.
+
+
+@node Formatting Fonts
+@subsection Formatting Fonts
+
+There are specs for highlighting, and these are shared by all the format
+variables. Text inside the @samp{%(} and @samp{%)} specifiers will get
+the special @code{mouse-face} property set, which means that it will be
+highlighted (with @code{gnus-mouse-face}) when you put the mouse pointer
+over it.
+
+Text inside the @samp{%@{} and @samp{%@}} specifiers will have their
+normal faces set using @code{gnus-face-0}, which is @code{bold} by
+default. If you say @samp{%1@{}, you'll get @code{gnus-face-1} instead,
+and so on. Create as many faces as you wish. The same goes for the
+@code{mouse-face} specs---you can say @samp{%3(hello%)} to have
+@samp{hello} mouse-highlighted with @code{gnus-mouse-face-3}.
+
+Text inside the @samp{%<<} and @samp{%>>} specifiers will get the
+special @code{balloon-help} property set to
+@code{gnus-balloon-face-0}. If you say @samp{%1<<}, you'll get
+@code{gnus-balloon-face-1} and so on. The @code{gnus-balloon-face-*}
+variables should be either strings or symbols naming functions that
+return a string. When the mouse passes over text with this property
+set, a balloon window will appear and display the string. Please
+refer to @ref{Tooltips, ,Tooltips, emacs, The Emacs Manual},
+(in GNU Emacs) or the doc string of @code{balloon-help-mode} (in
+XEmacs) for more information on this. (For technical reasons, the
+guillemets have been approximated as @samp{<<} and @samp{>>} in this
+paragraph.)
+
+Here's an alternative recipe for the group buffer:
+
+@lisp
+;; @r{Create three face types.}
+(setq gnus-face-1 'bold)
+(setq gnus-face-3 'italic)
+
+;; @r{We want the article count to be in}
+;; @r{a bold and green face. So we create}
+;; @r{a new face called @code{my-green-bold}.}
+(copy-face 'bold 'my-green-bold)
+;; @r{Set the color.}
+(set-face-foreground 'my-green-bold "ForestGreen")
+(setq gnus-face-2 'my-green-bold)
+
+;; @r{Set the new & fancy format.}
+(setq gnus-group-line-format
+ "%M%S%3@{%5y%@}%2[:%] %(%1@{%g%@}%)\n")
+@end lisp
+
+I'm sure you'll be able to use this scheme to create totally unreadable
+and extremely vulgar displays. Have fun!
+
+Note that the @samp{%(} specs (and friends) do not make any sense on the
+mode-line variables.
+
+@node Positioning Point
+@subsection Positioning Point
+
+Gnus usually moves point to a pre-defined place on each line in most
+buffers. By default, point move to the first colon character on the
+line. You can customize this behaviour in three different ways.
+
+You can move the colon character to somewhere else on the line.
+
+@findex gnus-goto-colon
+You can redefine the function that moves the point to the colon. The
+function is called @code{gnus-goto-colon}.
+
+But perhaps the most convenient way to deal with this, if you don't want
+to have a colon in your line, is to use the @samp{%*} specifier. If you
+put a @samp{%*} somewhere in your format line definition, Gnus will
+place point there.
+
+
+@node Tabulation
+@subsection Tabulation
+
+You can usually line up your displays by padding and cutting your
+strings. However, when combining various strings of different size, it
+can often be more convenient to just output the strings, and then worry
+about lining up the following text afterwards.
+
+To do that, Gnus supplies tabulator specs---@samp{%=}. There are two
+different types---@dfn{hard tabulators} and @dfn{soft tabulators}.
+
+@samp{%50=} will insert space characters to pad the line up to column
+50. If the text is already past column 50, nothing will be inserted.
+This is the soft tabulator.
+
+@samp{%-50=} will insert space characters to pad the line up to column
+50. If the text is already past column 50, the excess text past column
+50 will be removed. This is the hard tabulator.
+
+
+@node Wide Characters
+@subsection Wide Characters
+
+Fixed width fonts in most countries have characters of the same width.
+Some countries, however, use Latin characters mixed with wider
+characters---most notable East Asian countries.
+
+The problem is that when formatting, Gnus assumes that if a string is 10
+characters wide, it'll be 10 Latin characters wide on the screen. In
+these countries, that's not true.
+
+@vindex gnus-use-correct-string-widths
+To help fix this, you can set @code{gnus-use-correct-string-widths} to
+@code{t}. This makes buffer generation slower, but the results will be
+prettier. The default value under XEmacs is @code{t} but @code{nil}
+for Emacs.
+
+
+@node Window Layout
+@section Window Layout
+@cindex window layout
+
+No, there's nothing here about X, so be quiet.
+
+@vindex gnus-use-full-window
+If @code{gnus-use-full-window} non-@code{nil}, Gnus will delete all
+other windows and occupy the entire Emacs screen by itself. It is
+@code{t} by default.
+
+Setting this variable to @code{nil} kinda works, but there are
+glitches. Use at your own peril.
+
+@vindex gnus-buffer-configuration
+@code{gnus-buffer-configuration} describes how much space each Gnus
+buffer should be given. Here's an excerpt of this variable:
+
+@lisp
+((group (vertical 1.0 (group 1.0 point)
+ (if gnus-carpal (group-carpal 4))))
+ (article (vertical 1.0 (summary 0.25 point)
+ (article 1.0))))
+@end lisp
+
+This is an alist. The @dfn{key} is a symbol that names some action or
+other. For instance, when displaying the group buffer, the window
+configuration function will use @code{group} as the key. A full list of
+possible names is listed below.
+
+The @dfn{value} (i.e., the @dfn{split}) says how much space each buffer
+should occupy. To take the @code{article} split as an example -
+
+@lisp
+(article (vertical 1.0 (summary 0.25 point)
+ (article 1.0)))
+@end lisp
+
+This @dfn{split} says that the summary buffer should occupy 25% of upper
+half of the screen, and that it is placed over the article buffer. As
+you may have noticed, 100% + 25% is actually 125% (yup, I saw y'all
+reaching for that calculator there). However, the special number
+@code{1.0} is used to signal that this buffer should soak up all the
+rest of the space available after the rest of the buffers have taken
+whatever they need. There should be only one buffer with the @code{1.0}
+size spec per split.
+
+Point will be put in the buffer that has the optional third element
+@code{point}. In a @code{frame} split, the last subsplit having a leaf
+split where the tag @code{frame-focus} is a member (i.e. is the third or
+fourth element in the list, depending on whether the @code{point} tag is
+present) gets focus.
+
+Here's a more complicated example:
+
+@lisp
+(article (vertical 1.0 (group 4)
+ (summary 0.25 point)
+ (if gnus-carpal (summary-carpal 4))
+ (article 1.0)))
+@end lisp
+
+If the size spec is an integer instead of a floating point number,
+then that number will be used to say how many lines a buffer should
+occupy, not a percentage.
+
+If the @dfn{split} looks like something that can be @code{eval}ed (to be
+precise---if the @code{car} of the split is a function or a subr), this
split will be @code{eval}ed. If the result is non-@code{nil}, it will
be used as a split. This means that there will be three buffers if
@code{gnus-carpal} is @code{nil}, and four buffers if @code{gnus-carpal}
may look like:
@example
-split = frame | horizontal | vertical | buffer | form
-frame = "(frame " size *split ")"
-horizontal = "(horizontal " size *split ")"
-vertical = "(vertical " size *split ")"
-buffer = "(" buffer-name " " size *[ "point" ] *[ "frame-focus"] ")"
-size = number | frame-params
-buffer-name = group | article | summary ...
+@group
+split = frame | horizontal | vertical | buffer | form
+frame = "(frame " size *split ")"
+horizontal = "(horizontal " size *split ")"
+vertical = "(vertical " size *split ")"
+buffer = "(" buf-name " " size *[ "point" ] *[ "frame-focus"] ")"
+size = number | frame-params
+buf-name = group | article | summary ...
+@end group
@end example
The limitations are that the @code{frame} split can only appear as the
(vertical 0.24
(if (buffer-live-p gnus-summary-buffer)
'(summary 0.5))
- (group 1.0)))))
+ (group 1.0))))
@end lisp
One common desire for a multiple frame split is to have a separate frame
accomplish that, something like the following can be done:
@lisp
-(message (frame 1.0
- (if (not (buffer-live-p gnus-summary-buffer))
- (car (cdr (assoc 'group gnus-buffer-configuration)))
- (car (cdr (assoc 'summary gnus-buffer-configuration))))
- (vertical ((user-position . t) (top . 1) (left . 1)
- (name . "Message"))
- (message 1.0 point))))
+(message
+ (frame 1.0
+ (if (not (buffer-live-p gnus-summary-buffer))
+ (car (cdr (assoc 'group gnus-buffer-configuration)))
+ (car (cdr (assoc 'summary gnus-buffer-configuration))))
+ (vertical ((user-position . t) (top . 1) (left . 1)
+ (name . "Message"))
+ (message 1.0 point))))
@end lisp
@findex gnus-add-configuration
@end lisp
You'd typically stick these @code{gnus-add-configuration} calls in your
-@file{.gnus.el} file or in some startup hook---they should be run after
+@file{~/.gnus.el} file or in some startup hook---they should be run after
Gnus has been loaded.
@vindex gnus-always-force-window-configuration
to fiddle with @code{gnus-tree-minimize-window} to avoid having the
windows resized.
+@subsection Example Window Configurations
+
+@itemize @bullet
+@item
+Narrow left hand side occupied by group buffer. Right hand side split
+between summary buffer (top one-sixth) and article buffer (bottom).
+
+@ifinfo
+@example
++---+---------+
+| G | Summary |
+| r +---------+
+| o | |
+| u | Article |
+| p | |
++---+---------+
+@end example
+@end ifinfo
+
+@lisp
+(gnus-add-configuration
+ '(article
+ (horizontal 1.0
+ (vertical 25 (group 1.0))
+ (vertical 1.0
+ (summary 0.16 point)
+ (article 1.0)))))
+
+(gnus-add-configuration
+ '(summary
+ (horizontal 1.0
+ (vertical 25 (group 1.0))
+ (vertical 1.0 (summary 1.0 point)))))
+@end lisp
+
+@end itemize
+
@node Faces and Fonts
@section Faces and Fonts
Remember all those line format specification variables?
@code{gnus-summary-line-format}, @code{gnus-group-line-format}, and so
-on. Now, Gnus will of course heed whatever these variables are, but,
+on. By default, T-gnus will use the byte-compiled codes of these
+variables and we can keep a slow-down to a minimum. However, if you set
+@code{gnus-compile-user-specs} to @code{nil} (@code{t} by default),
unfortunately, changing them will mean a quite significant slow-down.
(The default values of these variables have byte-compiled functions
associated with them, while the user-generated versions do not, of
To help with this, you can run @kbd{M-x gnus-compile} after you've
fiddled around with the variables and feel that you're (kind of)
satisfied. This will result in the new specs being byte-compiled, and
-you'll get top speed again. Gnus will save these compiled specs in the
-@file{.newsrc.eld} file. (User-defined functions aren't compiled by
-this function, though---you should compile them yourself by sticking
-them into the @code{.gnus.el} file and byte-compiling that file.)
+you'll get top speed again. Note that T-gnus will not save these
+compiled specs in the @file{.newsrc.eld} file.
+
+@table @code
+@item gnus-compile-user-specs
+@vindex gnus-compile-user-specs
+If it is non-nil, the user-defined format specs will be byte-compiled
+automatically. The default value of this variable is @code{t}. It has
+an effect on the values of @code{gnus-*-line-format-spec}.
+@end table
@node Mode Lines
(gnus-demon-close-connections nil 30)
@end lisp
-Here's a handler that scans for PGP headers every hour when Emacs is
-idle:
+Here's a handler that scans for @acronym{PGP} headers every hour when
+Emacs is idle:
@lisp
(gnus-demon-scan-pgp 60 t)
@end lisp
-This @var{time} parameter and than @var{idle} parameter work together
+This @var{time} parameter and that @var{idle} parameter work together
in a strange, but wonderful fashion. Basically, if @var{idle} is
@code{nil}, then the function will be called every @var{time} minutes.
all the timings in the handlers will be affected.)
So, if you want to add a handler, you could put something like this in
-your @file{.gnus} file:
+your @file{~/.gnus.el} file:
@findex gnus-demon-add-handler
@lisp
@code{gnus-demon-add-nntp-close-connection},
@code{gnus-demon-add-scan-timestamps}, @code{gnus-demon-add-rescan}, and
@code{gnus-demon-add-scanmail}. Just put those functions in your
-@file{.gnus} if you want those abilities.
+@file{~/.gnus.el} if you want those abilities.
@findex gnus-demon-init
@findex gnus-demon-cancel
@item gnus-nocem-groups
@vindex gnus-nocem-groups
Gnus will look for NoCeM messages in the groups in this list. The
-default is @code{("news.lists.filters" "news.admin.net-abuse.bulletins"
-"alt.nocem.misc" "news.admin.net-abuse.announce")}.
+default is
+@lisp
+("news.lists.filters" "news.admin.net-abuse.bulletins"
+ "alt.nocem.misc" "news.admin.net-abuse.announce")
+@end lisp
@item gnus-nocem-issuers
@vindex gnus-nocem-issuers
There are many people issuing NoCeM messages. This list says what
-people you want to listen to. The default is @code{("Automoose-1"
-"rbraver@@ohww.norman.ok.us" "clewis@@ferret.ocunix.on.ca"
-"jem@@xpat.com" "snowhare@@xmission.com" "red@@redpoll.mrfs.oh.us
-(Richard E. Depew)")}; fine, upstanding citizens all of them.
-
-Known despammers that you can put in this list include:
-
-@table @samp
-@item clewis@@ferret.ocunix.on.ca;
-@cindex Chris Lewis
-Chris Lewis---Major Canadian despammer who has probably canceled more
-usenet abuse than anybody else.
-
-@item Automoose-1
-@cindex CancelMoose[tm]
-The CancelMoose[tm] on autopilot. The CancelMoose[tm] is reputed to be
-Norwegian, and was the person(s) who invented NoCeM.
-
-@item jem@@xpat.com;
-@cindex Jem
-John Milburn---despammer located in Korea who is getting very busy these
-days.
+people you want to listen to. The default is
+@lisp
+("Automoose-1" "clewis@@ferret.ocunix.on.ca"
+ "cosmo.roadkill" "SpamHippo" "hweede@@snafu.de")
+@end lisp
+fine, upstanding citizens all of them.
-@item red@@redpoll.mrfs.oh.us (Richard E. Depew)
-Richard E. Depew---lone American despammer. He mostly cancels binary
-postings to non-binary groups and removes spews (regurgitated articles).
-@end table
+Known despammers that you can put in this list are listed at@*
+@uref{http://www.xs4all.nl/~rosalind/nocemreg/nocemreg.html}.
You do not have to heed NoCeM messages from all these people---just the
ones you want to listen to. You also don't have to accept all NoCeM
header that gives the message a (more or less, usually less) rigorous
definition. Common types are @samp{spam}, @samp{spew}, @samp{mmf},
@samp{binary}, and @samp{troll}. To specify this, you have to use
-@var{(issuer conditions ...)} elements in the list. Each condition is
-either a string (which is a regexp that matches types you want to use)
-or a list on the form @code{(not STRING)}, where @var{string} is a
-regexp that matches types you don't want to use.
+@code{(@var{issuer} @var{conditions} @dots{})} elements in the list.
+Each condition is either a string (which is a regexp that matches types
+you want to use) or a list on the form @code{(not @var{string})}, where
+@var{string} is a regexp that matches types you don't want to use.
For instance, if you want all NoCeM messages from Chris Lewis except his
@samp{troll} messages, you'd say:
@item gnus-nocem-directory
@vindex gnus-nocem-directory
-This is where Gnus will store its NoCeM cache files. The default is
+This is where Gnus will store its NoCeM cache files. The default is@*
@file{~/News/NoCeM/}.
@item gnus-nocem-expiry-wait
The default is 15. If you make it shorter Gnus will be faster, but you
might then see old spam.
+@item gnus-nocem-check-from
+@vindex gnus-nocem-check-from
+Non-@code{nil} means check for valid issuers in message bodies.
+Otherwise don't bother fetching articles unless their author matches a
+valid issuer; that is much faster if you are selective about the
+issuers.
+
+@item gnus-nocem-check-article-limit
+@vindex gnus-nocem-check-article-limit
+If non-@code{nil}, the maximum number of articles to check in any NoCeM
+group. NoCeM groups can be huge and very slow to process.
+
@end table
Using NoCeM could potentially be a memory hog. If you have many living
@findex gnus-undo
The undoability is provided by the @code{gnus-undo-mode} minor mode. It
is used if @code{gnus-use-undo} is non-@code{nil}, which is the
-default. The @kbd{M-C-_} key performs the @code{gnus-undo} command
+default. The @kbd{C-M-_} key performs the @code{gnus-undo}
command, which should feel kinda like the normal Emacs @code{undo}
command.
+@node Predicate Specifiers
+@section Predicate Specifiers
+@cindex predicate specifiers
+
+Some Gnus variables are @dfn{predicate specifiers}. This is a special
+form that allows flexible specification of predicates without having
+to type all that much.
+
+These specifiers are lists consisting of functions, symbols and lists.
+
+Here's an example:
+
+@lisp
+(or gnus-article-unseen-p
+ gnus-article-unread-p)
+@end lisp
+
+The available symbols are @code{or}, @code{and} and @code{not}. The
+functions all take one parameter.
+
+@findex gnus-make-predicate
+Internally, Gnus calls @code{gnus-make-predicate} on these specifiers
+to create a function that can be called. This input parameter to this
+function will be passed along to all the functions in the predicate
+specifier.
+
+
@node Moderation
@section Moderation
@cindex moderation
(add-hook 'gnus-summary-mode-hook 'gnus-moderate)
@end lisp
-in your @file{.gnus.el} file.
+in your @file{~/.gnus.el} file.
If you are the moderator of @samp{rec.zoofle}, this is how it's
supposed to work:
@end lisp
-@node XEmacs Enhancements
-@section XEmacs Enhancements
-@cindex XEmacs
-
-XEmacs is able to display pictures and stuff, so Gnus has taken
-advantage of that.
-
-@menu
-* Picons:: How to display pictures of what your reading.
-* Smileys:: Show all those happy faces the way they were meant to be shown.
-* Toolbar:: Click'n'drool.
-* XVarious:: Other XEmacsy Gnusey variables.
-@end menu
-
-
-@node Picons
-@subsection Picons
-
-@iftex
-@iflatex
-\include{picons}
-@end iflatex
-@end iftex
+@node Image Enhancements
+@section Image Enhancements
-So... You want to slow down your news reader even more! This is a
-good way to do so. Its also a great way to impress people staring
-over your shoulder as you read news.
+XEmacs, as well as Emacs 21@footnote{Emacs 21 on MS Windows doesn't
+support images yet.}, is able to display pictures and stuff, so Gnus has
+taken advantage of that.
@menu
-* Picon Basics:: What are picons and How do I get them.
-* Picon Requirements:: Don't go further if you aren't using XEmacs.
-* Easy Picons:: Displaying Picons---the easy way.
-* Hard Picons:: The way you should do it. You'll learn something.
-* Picon Useless Configuration:: Other variables you can trash/tweak/munge/play with.
+* X-Face:: Display a funky, teensy black-and-white image.
+* Face:: Display a funkier, teensier colored image.
+* Smileys:: Show all those happy faces the way they were meant to be shown.
+* Picons:: How to display pictures of what you're reading.
+* XVarious:: Other XEmacsy Gnusey variables.
@end menu
-@node Picon Basics
-@subsubsection Picon Basics
-
-What are Picons? To quote directly from the Picons Web site:
-
-@iftex
-@iflatex
-\margindex{}
-@end iflatex
-@end iftex
-
-@quotation
-@dfn{Picons} is short for ``personal icons''. They're small,
-constrained images used to represent users and domains on the net,
-organized into databases so that the appropriate image for a given
-e-mail address can be found. Besides users and domains, there are picon
-databases for Usenet newsgroups and weather forecasts. The picons are
-in either monochrome @code{XBM} format or color @code{XPM} and
-@code{GIF} formats.
-@end quotation
-
-@vindex gnus-picons-piconsearch-url
-If you have a permanent connection to the Internet you can use Steve
-Kinzler's Picons Search engine by setting
-@code{gnus-picons-piconsearch-url} to the string @*
-@file{http://www.cs.indiana.edu/picons/search.html}.
-
-@vindex gnus-picons-database
-Otherwise you need a local copy of his database. For instructions on
-obtaining and installing the picons databases, point your Web browser at @*
-@file{http://www.cs.indiana.edu/picons/ftp/index.html}. Gnus expects
-picons to be installed into a location pointed to by
-@code{gnus-picons-database}.
-
-
-@node Picon Requirements
-@subsubsection Picon Requirements
-
-To have Gnus display Picons for you, you must be running XEmacs
-19.13 or greater since all other versions of Emacs aren't yet able to
-display images.
-
-Additionally, you must have @code{x} support compiled into XEmacs. To
-display color picons which are much nicer than the black & white one,
-you also need one of @code{xpm} or @code{gif} compiled into XEmacs.
-
-@vindex gnus-picons-convert-x-face
-If you want to display faces from @code{X-Face} headers, you should have
-the @code{xface} support compiled into XEmacs. Otherwise you must have
-the @code{netpbm} utilities installed, or munge the
-@code{gnus-picons-convert-x-face} variable to use something else.
-
-
-@node Easy Picons
-@subsubsection Easy Picons
-
-To enable displaying picons, simply put the following line in your
-@file{~/.gnus} file and start Gnus.
-
-@lisp
-(setq gnus-use-picons t)
-(setq gnus-treat-display-picons t)
-@end lisp
-
-and make sure @code{gnus-picons-database} points to the directory
-containing the Picons databases.
-
-Alternatively if you want to use the web piconsearch engine add this:
-
-@lisp
-(setq gnus-picons-piconsearch-url
- "http://www.cs.indiana.edu:800/piconsearch")
-@end lisp
-
+@node X-Face
+@subsection X-Face
+@cindex x-face
-@node Hard Picons
-@subsubsection Hard Picons
+@code{X-Face} headers describe a 48x48 pixel black-and-white (1 bit
+depth) image that's supposed to represent the author of the message.
+It seems to be supported by an ever-growing number of mail and news
+readers.
+@cindex x-face
+@findex gnus-article-display-x-face
+@vindex gnus-article-x-face-command
+@vindex gnus-article-x-face-too-ugly
@iftex
@iflatex
-\margindex{}
+\include{xface}
@end iflatex
@end iftex
+@c @anchor{X-Face}
-Gnus can display picons for you as you enter and leave groups and
-articles. It knows how to interact with three sections of the picons
-database. Namely, it can display the picons newsgroup pictures,
-author's face picture(s), and the authors domain. To enable this
-feature, you need to select where to get the picons from, and where to
-display them.
+Gnus now uses the internal ELisp-based @code{uncompface} program for
+decoding an @code{X-Face} header normally in Emacs. While it doesn't
+require any other external program, you may feel it is slow if you are
+using a slow machine. In such a case, you can modify the following
+variables:
@table @code
-
-@item gnus-picons-database
-@vindex gnus-picons-database
-The location of the picons database. Should point to a directory
-containing the @file{news}, @file{domains}, @file{users} (and so on)
-subdirectories. This is only useful if
-@code{gnus-picons-piconsearch-url} is @code{nil}. Defaults to
-@file{/usr/local/faces/}.
-
-@item gnus-picons-piconsearch-url
-@vindex gnus-picons-piconsearch-url
-The URL for the web picons search engine. The only currently known
-engine is @file{http://www.cs.indiana.edu:800/piconsearch}. To
-workaround network delays, icons will be fetched in the background. If
-this is @code{nil} 'the default), then picons are fetched from local
-database indicated by @code{gnus-picons-database}.
-
-@item gnus-picons-display-where
-@vindex gnus-picons-display-where
-Where the picon images should be displayed. It is @code{picons} by
-default (which by default maps to the buffer @samp{*Picons*}). Other
-valid places could be @code{article}, @code{summary}, or
-@samp{*scratch*} for all I care. Just make sure that you've made the
-buffer visible using the standard Gnus window configuration
-routines---@pxref{Windows Configuration}.
-
-@item gnus-picons-group-excluded-groups
-@vindex gnus-picons-group-excluded-groups
-Groups that are matched by this regexp won't have their group icons
-displayed.
-
+@item uncompface-use-external
+@vindex uncompface-use-external
+Specify which of the internal or the external decoder should be used.
+@code{nil} means to use the internal ELisp-based @code{uncompface}
+program. @code{t} means to use the external decoder. The default value
+is normally @code{undecided} which means to determine it by checking
+whether the host machine is slow, being controlled by
+@code{uncompface-use-external-threshold} (which see).
+
+@item uncompface-use-external-threshold
+@vindex uncompface-use-external-threshold
+A number of seconds to check whether the host machine is slow. If the
+host takes time larger than this value for decoding an @code{X-Face}
+using the internal ELisp-based @code{uncompface} program, it will be
+changed to using the external decoder. The default is 0.1 seconds.
@end table
-Note: If you set @code{gnus-use-picons} to @code{t}, it will set up your
-window configuration for you to include the @code{picons} buffer.
+If the internal decoder is invalidated or if you are using XEmacs,
+decoding an @code{X-Face} header either requires an Emacs that has
+@samp{compface} support (which most XEmacs versions has), or that you
+have @samp{compface} installed on your system. If either is true,
+Gnus will default to displaying @code{X-Face} headers.
+
+The variable that controls this is the
+@code{gnus-article-x-face-command} variable. If this variable is a
+string, this string will be executed in a sub-shell. If it is a
+function, this function will be called with the face as the argument.
+If the @code{gnus-article-x-face-too-ugly} (which is a regexp) matches
+the @code{From} header, the face will not be shown.
+
+The default action under Emacs 20 is to fork off the @code{display}
+program@footnote{@code{display} is from the ImageMagick package. For
+the @code{uncompface} and @code{icontopbm} programs look for a package
+like @code{compface} or @code{faces-xface} on a GNU/Linux system.} to
+view the face.
+
+Under XEmacs or Emacs 21+ with suitable image support, the default
+action is to display the face before the @code{From} header. (It's
+nicer if XEmacs has been compiled with @code{X-Face} support---that
+will make display somewhat faster. If there's no native @code{X-Face}
+support, Gnus will try to convert the @code{X-Face} header using
+external programs from the @code{pbmplus} package and
+friends.@footnote{On a GNU/Linux system look for packages with names
+like @code{netpbm}, @code{libgr-progs} and @code{compface}.})
+
+(Note: @code{x-face} is used in the variable/function names, not
+@code{xface}).
+
+@noindent
+Face and variable:
-Now that you've made those decision, you need to add the following
-functions to the appropriate hooks so these pictures will get displayed
-at the right time.
-
-@vindex gnus-picons-display-where
@table @code
-@item gnus-article-display-picons
-@findex gnus-article-display-picons
-Looks up and displays the picons for the author and the author's domain
-in the @code{gnus-picons-display-where} buffer.
+@item gnus-x-face
+@vindex gnus-x-face
+Face to show X-Face. The colors from this face are used as the
+foreground and background colors of the displayed X-Faces. The
+default colors are black and white.
+
+@item gnus-face-properties-alist
+@vindex gnus-face-properties-alist
+Alist of image types and properties applied to Face (@pxref{Face}) and
+X-Face images. The default value is @code{((pbm . (:face gnus-x-face))
+(png . nil))} for Emacs or @code{((xface . (:face gnus-x-face)))} for
+XEmacs. Here are examples:
-@item gnus-picons-article-display-x-face
-@findex gnus-article-display-picons
-Decodes and displays the X-Face header if present.
+@lisp
+;; Specify the altitude of Face and X-Face images in the From header.
+(setq gnus-face-properties-alist
+ '((pbm . (:face gnus-x-face :ascent 80))
+ (png . (:ascent 80))))
+
+;; Show Face and X-Face images as pressed buttons.
+(setq gnus-face-properties-alist
+ '((pbm . (:face gnus-x-face :relief -2))
+ (png . (:relief -2))))
+@end lisp
+@pxref{Image Descriptors, ,Image Descriptors, elisp, The Emacs Lisp
+Reference Manual} for the valid properties for various image types.
+Currently, @code{pbm} is used for X-Face images and @code{png} is used
+for Face images in Emacs. Only the @code{:face} property is effective
+on the @code{xface} image type in XEmacs if it is built with the
+@samp{libcompface} library.
@end table
+Gnus provides a few convenience functions and variables to allow
+easier insertion of X-Face headers in outgoing messages.
+
+@findex gnus-random-x-face
+@vindex gnus-convert-pbm-to-x-face-command
+@vindex gnus-x-face-directory
+@code{gnus-random-x-face} goes through all the @samp{pbm} files in
+@code{gnus-x-face-directory} and picks one at random, and then
+converts it to the X-Face format by using the
+@code{gnus-convert-pbm-to-x-face-command} shell command. The
+@samp{pbm} files should be 48x48 pixels big. It returns the X-Face
+header data as a string.
+
+@findex gnus-insert-random-x-face-header
+@code{gnus-insert-random-x-face-header} calls
+@code{gnus-random-x-face} and inserts a @samp{X-Face} header with the
+randomly generated data.
+
+@findex gnus-x-face-from-file
+@vindex gnus-convert-image-to-x-face-command
+@code{gnus-x-face-from-file} takes a GIF file as the parameter, and then
+converts the file to X-Face format by using the
+@code{gnus-convert-image-to-x-face-command} shell command.
+
+Here's how you would typically use the first function. Put something
+like the following in your @file{~/.gnus.el} file:
+@lisp
+(setq message-required-news-headers
+ (nconc message-required-news-headers
+ (list '(X-Face . gnus-random-x-face))))
+@end lisp
-@node Picon Useless Configuration
-@subsubsection Picon Useless Configuration
+Using the last function would be something like this:
-@iftex
-@iflatex
-\margindex{}
-@end iflatex
-@end iftex
+@lisp
+(setq message-required-news-headers
+ (nconc message-required-news-headers
+ (list '(X-Face . (lambda ()
+ (gnus-x-face-from-file
+ "~/My-face.gif"))))))
+@end lisp
-The following variables offer further control over how things are
-done, where things are located, and other useless stuff you really
-don't need to worry about.
-@table @code
+@node Face
+@subsection Face
+@cindex face
-@item gnus-picons-news-directories
-@vindex gnus-picons-news-directories
-List of subdirectories to search in @code{gnus-picons-database} for
-newsgroups faces. @code{("news")} is the default.
+@c #### FIXME: faces and x-faces'implementations should really be harmonized.
-@item gnus-picons-user-directories
-@vindex gnus-picons-user-directories
-List of subdirectories to search in @code{gnus-picons-database} for user
-faces. @code{("local" "users" "usenix" "misc")} is the default.
+@code{Face} headers are essentially a funkier version of @code{X-Face}
+ones. They describe a 48x48 pixel colored image that's supposed to
+represent the author of the message.
-@item gnus-picons-domain-directories
-@vindex gnus-picons-domain-directories
-List of subdirectories to search in @code{gnus-picons-database} for
-domain name faces. Defaults to @code{("domains")}. Some people may
-want to add @samp{"unknown"} to this list.
+@cindex face
+@findex gnus-article-display-face
+The contents of a @code{Face} header must be a base64 encoded PNG image.
+See @uref{http://quimby.gnus.org/circus/face/} for the precise
+specifications.
-@item gnus-picons-convert-x-face
-@vindex gnus-picons-convert-x-face
-If you don't have @code{xface} support builtin XEmacs, this is the
-command to use to convert the @code{X-Face} header to an X bitmap
-(@code{xbm}). Defaults to @code{(format "@{ echo '/* Width=48,
-Height=48 */'; uncompface; @} | icontopbm | pbmtoxbm > %s"
-gnus-picons-x-face-file-name)}
-
-@item gnus-picons-x-face-file-name
-@vindex gnus-picons-x-face-file-name
-Names a temporary file to store the @code{X-Face} bitmap in. Defaults
-to @code{(format "/tmp/picon-xface.%s.xbm" (user-login-name))}.
-
-@item gnus-picons-has-modeline-p
-@vindex gnus-picons-has-modeline-p
-If you have set @code{gnus-picons-display-where} to @code{picons}, your
-XEmacs frame will become really cluttered. To alleviate this a bit you
-can set @code{gnus-picons-has-modeline-p} to @code{nil}; this will
-remove the mode line from the Picons buffer. This is only useful if
-@code{gnus-picons-display-where} is @code{picons}.
-
-@item gnus-picons-refresh-before-display
-@vindex gnus-picons-refresh-before-display
-If non-nil, display the article buffer before computing the picons.
-Defaults to @code{nil}.
-
-@item gnus-picons-display-as-address
-@vindex gnus-picons-display-as-address
-If @code{t} display textual email addresses along with pictures.
-Defaults to @code{t}.
-
-@item gnus-picons-file-suffixes
-@vindex gnus-picons-file-suffixes
-Ordered list of suffixes on picon file names to try. Defaults to
-@code{("xpm" "gif" "xbm")} minus those not builtin your XEmacs.
+The @code{gnus-face-properties-alist} variable affects the appearance of
+displayed Face images. @xref{X-Face}.
-@item gnus-picons-setup-hook
-@vindex gnus-picons-setup-hook
-Hook run in the picon buffer, if that is displayed.
+Gnus provides a few convenience functions and variables to allow
+easier insertion of Face headers in outgoing messages.
-@item gnus-picons-display-article-move-p
-@vindex gnus-picons-display-article-move-p
-Whether to move point to first empty line when displaying picons. This
-has only an effect if `gnus-picons-display-where' has value `article'.
+@findex gnus-convert-png-to-face
+@code{gnus-convert-png-to-face} takes a 48x48 PNG image, no longer than
+726 bytes long, and converts it to a face.
-If @code{nil}, display the picons in the @code{From} and
-@code{Newsgroups} lines. This is the defailt.
+@findex gnus-face-from-file
+@vindex gnus-convert-image-to-face-command
+@code{gnus-face-from-file} takes a JPEG file as the parameter, and then
+converts the file to Face format by using the
+@code{gnus-convert-image-to-face-command} shell command.
-@item gnus-picons-clear-cache-on-shutdown
-@vindex gnus-picons-clear-cache-on-shutdown
-Whether to clear the picons cache when exiting gnus. Gnus caches every
-picons it finds while it is running. This saves some time in the search
-process but eats some memory. If this variable is set to @code{nil},
-Gnus will never clear the cache itself; you will have to manually call
-@code{gnus-picons-clear-cache} to clear it. Otherwise the cache will be
-cleared every time you exit Gnus. Defaults to @code{t}.
+Here's how you would typically use this function. Put something like the
+following in your @file{~/.gnus.el} file:
-@iftex
-@iflatex
-\margindex{}
-@end iflatex
-@end iftex
+@lisp
+(setq message-required-news-headers
+ (nconc message-required-news-headers
+ (list '(Face . (lambda ()
+ (gnus-face-from-file "~/face.jpg"))))))
+@end lisp
-@end table
@node Smileys
@subsection Smileys
@iftex
@iflatex
-\gnusfig{-3cm}{0.5cm}{\epsfig{figure=tmp/BigFace.ps,height=20cm}}
+\gnusfig{-3cm}{0.5cm}{\epsfig{figure=ps/BigFace,height=20cm}}
\input{smiley}
@end iflatex
@end iftex
currently the only package that uses Smiley, it is documented here.
In short---to use Smiley in Gnus, put the following in your
-@file{.gnus.el} file:
+@file{~/.gnus.el} file:
@lisp
-(setq gnus-treat-display-smiley t)
+(setq gnus-treat-display-smileys t)
@end lisp
-Smiley maps text smiley faces---@samp{:-)}, @samp{:-=}, @samp{:-(} and
+Smiley maps text smiley faces---@samp{:-)}, @samp{8-)}, @samp{:-(} and
the like---to pictures and displays those instead of the text smiley
faces. The conversion is controlled by a list of regexps that matches
text and maps that to file names.
-@vindex smiley-nosey-regexp-alist
-@vindex smiley-deformed-regexp-alist
-Smiley supplies two example conversion alists by default:
-@code{smiley-deformed-regexp-alist} (which matches @samp{:)}, @samp{:(}
-and so on), and @code{smiley-nosey-regexp-alist} (which matches
-@samp{:-)}, @samp{:-(} and so on).
-
-The alist used is specified by the @code{smiley-regexp-alist} variable,
-which defaults to the value of @code{smiley-deformed-regexp-alist}.
-
-The first item in each element is the regexp to be matched; the second
-element is the regexp match group that is to be replaced by the picture;
-and the third element is the name of the file to be displayed.
+@vindex smiley-regexp-alist
+The alist used is specified by the @code{smiley-regexp-alist}
+variable. The first item in each element is the regexp to be matched;
+the second element is the regexp match group that is to be replaced by
+the picture; and the third element is the name of the file to be
+displayed.
The following variables customize where Smiley will look for these
-files, as well as the color to be used and stuff:
+files:
@table @code
@vindex smiley-data-directory
Where Smiley will look for smiley faces files.
-@item smiley-flesh-color
-@vindex smiley-flesh-color
-Skin color. The default is @samp{yellow}, which is really racist.
+@item gnus-smiley-file-types
+@vindex gnus-smiley-file-types
+List of suffixes on smiley file names to try.
-@item smiley-features-color
-@vindex smiley-features-color
-Color of the features of the face. The default is @samp{black}.
-
-@item smiley-tongue-color
-@vindex smiley-tongue-color
-Color of the tongue. The default is @samp{red}.
-
-@item smiley-circle-color
-@vindex smiley-circle-color
-Color of the circle around the face. The default is @samp{black}.
+@end table
-@item smiley-mouse-face
-@vindex smiley-mouse-face
-Face used for mouse highlighting over the smiley face.
-@end table
+@node Picons
+@subsection Picons
+@iftex
+@iflatex
+\include{picons}
+@end iflatex
+@end iftex
-@node Toolbar
-@subsection Toolbar
+So@dots{} You want to slow down your news reader even more! This is a
+good way to do so. It's also a great way to impress people staring
+over your shoulder as you read news.
-@table @code
+What are Picons? To quote directly from the Picons Web site:
@iftex
@iflatex
@end iflatex
@end iftex
-@item gnus-use-toolbar
-@vindex gnus-use-toolbar
-If @code{nil}, don't display toolbars. If non-@code{nil}, it should be
-one of @code{default-toolbar}, @code{top-toolbar}, @code{bottom-toolbar},
-@code{right-toolbar}, or @code{left-toolbar}.
+@quotation
+@dfn{Picons} is short for ``personal icons''. They're small,
+constrained images used to represent users and domains on the net,
+organized into databases so that the appropriate image for a given
+e-mail address can be found. Besides users and domains, there are picon
+databases for Usenet newsgroups and weather forecasts. The picons are
+in either monochrome @code{XBM} format or color @code{XPM} and
+@code{GIF} formats.
+@end quotation
-@item gnus-group-toolbar
-@vindex gnus-group-toolbar
-The toolbar in the group buffer.
+@vindex gnus-picon-databases
+For instructions on obtaining and installing the picons databases,
+point your Web browser at
+@uref{http://www.cs.indiana.edu/picons/ftp/index.html}.
-@item gnus-summary-toolbar
-@vindex gnus-summary-toolbar
-The toolbar in the summary buffer.
+If you are using Debian GNU/Linux, saying @samp{apt-get install
+picons.*} will install the picons where Gnus can find them.
-@item gnus-summary-mail-toolbar
-@vindex gnus-summary-mail-toolbar
-The toolbar in the summary buffer of mail groups.
+To enable displaying picons, simply make sure that
+@code{gnus-picon-databases} points to the directory containing the
+Picons databases.
+
+The following variables offer control over where things are located.
+
+@table @code
+
+@item gnus-picon-databases
+@vindex gnus-picon-databases
+The location of the picons database. This is a list of directories
+containing the @file{news}, @file{domains}, @file{users} (and so on)
+subdirectories. Defaults to @code{("/usr/lib/picon"
+"/usr/local/faces")}.
+
+@item gnus-picon-news-directories
+@vindex gnus-picon-news-directories
+List of subdirectories to search in @code{gnus-picon-databases} for
+newsgroups faces. @code{("news")} is the default.
+
+@item gnus-picon-user-directories
+@vindex gnus-picon-user-directories
+List of subdirectories to search in @code{gnus-picon-databases} for user
+faces. @code{("users" "usenix" "local" "misc")} is the default.
+
+@item gnus-picon-domain-directories
+@vindex gnus-picon-domain-directories
+List of subdirectories to search in @code{gnus-picon-databases} for
+domain name faces. Defaults to @code{("domains")}. Some people may
+want to add @samp{"unknown"} to this list.
+
+@item gnus-picon-file-types
+@vindex gnus-picon-file-types
+Ordered list of suffixes on picon file names to try. Defaults to
+@code{("xpm" "gif" "xbm")} minus those not built-in your Emacs.
@end table
A glyph displayed in all Gnus mode lines. It is a tiny gnu head by
default.
-@iftex
-@iflatex
-\margindex{}
-@end iflatex
-@end iftex
-
@end table
+@subsubsection Toolbar
+
+@table @code
+
+@item gnus-use-toolbar
+@vindex gnus-use-toolbar
+If @code{nil}, don't display toolbars. If non-@code{nil}, it should be
+one of @code{default-toolbar}, @code{top-toolbar}, @code{bottom-toolbar},
+@code{right-toolbar}, or @code{left-toolbar}.
+
+@item gnus-group-toolbar
+@vindex gnus-group-toolbar
+The toolbar in the group buffer.
+
+@item gnus-summary-toolbar
+@vindex gnus-summary-toolbar
+The toolbar in the summary buffer.
+
+@item gnus-summary-mail-toolbar
+@vindex gnus-summary-mail-toolbar
+The toolbar in the summary buffer of mail groups.
+
+@end table
+@iftex
+@iflatex
+\margindex{}
+@end iflatex
+@end iftex
@node Fuzzy Matching
(``New! Miracle tonic for growing full, lustrous hair on your toes!'')
and one mail asking me to repent and find some god.
-This is annoying.
+This is annoying. Here's what you can do about it.
+
+@menu
+* The problem of spam:: Some background, and some solutions
+* Anti-Spam Basics:: Simple steps to reduce the amount of spam.
+* SpamAssassin:: How to use external anti-spam tools.
+* Hashcash:: Reduce spam by burning CPU time.
+* Filtering Spam Using The Spam ELisp Package::
+* Filtering Spam Using Statistics with spam-stat::
+@end menu
+
+@node The problem of spam
+@subsection The problem of spam
+@cindex email spam
+@cindex spam filtering approaches
+@cindex filtering approaches, spam
+@cindex UCE
+@cindex unsolicited commercial email
+
+First, some background on spam.
+
+If you have access to e-mail, you are familiar with spam (technically
+termed @acronym{UCE}, Unsolicited Commercial E-mail). Simply put, it
+exists because e-mail delivery is very cheap compared to paper mail,
+so only a very small percentage of people need to respond to an UCE to
+make it worthwhile to the advertiser. Ironically, one of the most
+common spams is the one offering a database of e-mail addresses for
+further spamming. Senders of spam are usually called @emph{spammers},
+but terms like @emph{vermin}, @emph{scum}, @emph{sociopaths}, and
+@emph{morons} are in common use as well.
+
+Spam comes from a wide variety of sources. It is simply impossible to
+dispose of all spam without discarding useful messages. A good
+example is the TMDA system, which requires senders
+unknown to you to confirm themselves as legitimate senders before
+their e-mail can reach you. Without getting into the technical side
+of TMDA, a downside is clearly that e-mail from legitimate sources may
+be discarded if those sources can't or won't confirm themselves
+through the TMDA system. Another problem with TMDA is that it
+requires its users to have a basic understanding of e-mail delivery
+and processing.
+
+The simplest approach to filtering spam is filtering, at the mail
+server or when you sort through incoming mail. If you get 200 spam
+messages per day from @samp{random-address@@vmadmin.com}, you block
+@samp{vmadmin.com}. If you get 200 messages about @samp{VIAGRA}, you
+discard all messages with @samp{VIAGRA} in the message. If you get
+lots of spam from Bulgaria, for example, you try to filter all mail
+from Bulgarian IPs.
+
+This, unfortunately, is a great way to discard legitimate e-mail. The
+risks of blocking a whole country (Bulgaria, Norway, Nigeria, China,
+etc.) or even a continent (Asia, Africa, Europe, etc.) from contacting
+you should be obvious, so don't do it if you have the choice.
+
+In another instance, the very informative and useful RISKS digest has
+been blocked by overzealous mail filters because it @strong{contained}
+words that were common in spam messages. Nevertheless, in isolated
+cases, with great care, direct filtering of mail can be useful.
+
+Another approach to filtering e-mail is the distributed spam
+processing, for instance DCC implements such a system. In essence,
+@var{N} systems around the world agree that a machine @var{X} in
+Ghana, Estonia, or California is sending out spam e-mail, and these
+@var{N} systems enter @var{X} or the spam e-mail from @var{X} into a
+database. The criteria for spam detection vary---it may be the number
+of messages sent, the content of the messages, and so on. When a user
+of the distributed processing system wants to find out if a message is
+spam, he consults one of those @var{N} systems.
+
+Distributed spam processing works very well against spammers that send
+a large number of messages at once, but it requires the user to set up
+fairly complicated checks. There are commercial and free distributed
+spam processing systems. Distributed spam processing has its risks as
+well. For instance legitimate e-mail senders have been accused of
+sending spam, and their web sites and mailing lists have been shut
+down for some time because of the incident.
+
+The statistical approach to spam filtering is also popular. It is
+based on a statistical analysis of previous spam messages. Usually
+the analysis is a simple word frequency count, with perhaps pairs of
+words or 3-word combinations thrown into the mix. Statistical
+analysis of spam works very well in most of the cases, but it can
+classify legitimate e-mail as spam in some cases. It takes time to
+run the analysis, the full message must be analyzed, and the user has
+to store the database of spam analyses. Statistical analysis on the
+server is gaining popularity. This has the advantage of letting the
+user Just Read Mail, but has the disadvantage that it's harder to tell
+the server that it has misclassified mail.
+
+Fighting spam is not easy, no matter what anyone says. There is no
+magic switch that will distinguish Viagra ads from Mom's e-mails.
+Even people are having a hard time telling spam apart from non-spam,
+because spammers are actively looking to fool us into thinking they
+are Mom, essentially. Spamming is irritating, irresponsible, and
+idiotic behavior from a bunch of people who think the world owes them
+a favor. We hope the following sections will help you in fighting the
+spam plague.
+
+@node Anti-Spam Basics
+@subsection Anti-Spam Basics
+@cindex email spam
+@cindex spam
+@cindex UCE
+@cindex unsolicited commercial email
-The way to deal with this is having Gnus split out all spam into a
+One way of dealing with spam is having Gnus split out all spam into a
@samp{spam} mail group (@pxref{Splitting Mail}).
First, pick one (1) valid mail address that you can be reached at, and
put it in your @code{From} header of all your news articles. (I've
chosen @samp{larsi@@trym.ifi.uio.no}, but for many addresses on the form
@samp{larsi+usenet@@ifi.uio.no} will be a better choice. Ask your
-sysadm whether your sendmail installation accepts keywords in the local
+sysadmin whether your sendmail installation accepts keywords in the local
part of the mail address.)
@lisp
(@pxref{Fancy Mail Splitting}):
@lisp
-(
- ...
+(...
(to "larsi@@trym.ifi.uio.no"
- (| ("subject" "re:.*" "misc")
- ("references" ".*@@.*" "misc")
- "spam"))
- ...
-)
+ (| ("subject" "re:.*" "misc")
+ ("references" ".*@@.*" "misc")
+ "spam"))
+ ...)
@end lisp
This says that all mail to this address is suspect, but if it has a
header, it's probably ok. All the rest goes to the @samp{spam} group.
(This idea probably comes from Tim Pierce.)
-In addition, many mail spammers talk directly to your @code{smtp} server
+In addition, many mail spammers talk directly to your @acronym{SMTP} server
and do not include your email address explicitly in the @code{To}
header. Why they do this is unknown---perhaps it's to thwart this
thwarting scheme? In any case, this is trivial to deal with---you just
citizen, you can even send off complaints to the proper authorities on
each unsolicited commercial email---at your leisure.
-If you are also a lazy net citizen, you will probably prefer complaining
-automatically with the @file{gnus-junk.el} package, available FOR FREE
-at @* @file{<URL:http://stud2.tuwien.ac.at/~e9426626/gnus-junk.html>}.
-Since most e-mail spam is sent automatically, this may reconcile the
-cosmic balance somewhat.
-
This works for me. It allows people an easy way to contact me (they can
just press @kbd{r} in the usual way), and I'm not bothered at all with
spam. It's a win-win situation. Forging @code{From} headers to point
to non-existent domains is yucky, in my opinion.
+Be careful with this approach. Spammers are wise to it.
-@node Various Various
-@section Various Various
-@cindex mode lines
-@cindex highlights
+
+@node SpamAssassin
+@subsection SpamAssassin, Vipul's Razor, DCC, etc
+@cindex SpamAssassin
+@cindex Vipul's Razor
+@cindex DCC
+
+The days where the hints in the previous section were sufficient in
+avoiding spam are coming to an end. There are many tools out there
+that claim to reduce the amount of spam you get. This section could
+easily become outdated fast, as new products replace old, but
+fortunately most of these tools seem to have similar interfaces. Even
+though this section will use SpamAssassin as an example, it should be
+easy to adapt it to most other tools.
+
+Note that this section does not involve the @code{spam.el} package,
+which is discussed in the next section. If you don't care for all
+the features of @code{spam.el}, you can make do with these simple
+recipes.
+
+If the tool you are using is not installed on the mail server, you
+need to invoke it yourself. Ideas on how to use the
+@code{:postscript} mail source parameter (@pxref{Mail Source
+Specifiers}) follow.
+
+@lisp
+(setq mail-sources
+ '((file :prescript "formail -bs spamassassin < /var/mail/%u")
+ (pop :user "jrl"
+ :server "pophost"
+ :postscript
+ "mv %t /tmp/foo; formail -bs spamc < /tmp/foo > %t")))
+@end lisp
+
+Once you manage to process your incoming spool somehow, thus making
+the mail contain e.g.@: a header indicating it is spam, you are ready to
+filter it out. Using normal split methods (@pxref{Splitting Mail}):
+
+@lisp
+(setq nnmail-split-methods '(("spam" "^X-Spam-Flag: YES")
+ ...))
+@end lisp
+
+Or using fancy split methods (@pxref{Fancy Mail Splitting}):
+
+@lisp
+(setq nnmail-split-methods 'nnmail-split-fancy
+ nnmail-split-fancy '(| ("X-Spam-Flag" "YES" "spam")
+ ...))
+@end lisp
+
+Some people might not like the idea of piping the mail through various
+programs using a @code{:prescript} (if some program is buggy, you
+might lose all mail). If you are one of them, another solution is to
+call the external tools during splitting. Example fancy split method:
+
+@lisp
+(setq nnmail-split-fancy '(| (: kevin-spamassassin)
+ ...))
+(defun kevin-spamassassin ()
+ (save-excursion
+ (save-restriction
+ (widen)
+ (if (eq 1 (call-process-region (point-min) (point-max)
+ "spamc" nil nil nil "-c"))
+ "spam"))))
+@end lisp
+
+Note that with the nnimap backend, message bodies will not be
+downloaded by default. You need to set
+@code{nnimap-split-download-body} to @code{t} to do that
+(@pxref{Splitting in IMAP}).
+
+That is about it. As some spam is likely to get through anyway, you
+might want to have a nifty function to call when you happen to read
+spam. And here is the nifty function:
+
+@lisp
+ (defun my-gnus-raze-spam ()
+ "Submit SPAM to Vipul's Razor, then mark it as expirable."
+ (interactive)
+ (gnus-summary-show-raw-article)
+ (gnus-summary-save-in-pipe "razor-report -f -d")
+ (gnus-summary-mark-as-expirable 1))
+@end lisp
+
+@node Hashcash
+@subsection Hashcash
+@cindex hashcash
+
+A novel technique to fight spam is to require senders to do something
+costly for each message they send. This has the obvious drawback that
+you cannot rely on everyone in the world using this technique,
+since it is not part of the Internet standards, but it may be useful
+in smaller communities.
+
+While the tools in the previous section work well in practice, they
+work only because the tools are constantly maintained and updated as
+new form of spam appears. This means that a small percentage of spam
+will always get through. It also means that somewhere, someone needs
+to read lots of spam to update these tools. Hashcash avoids that, but
+instead prefers that everyone you contact through e-mail supports the
+scheme. You can view the two approaches as pragmatic vs dogmatic.
+The approaches have their own advantages and disadvantages, but as
+often in the real world, a combination of them is stronger than either
+one of them separately.
+
+@cindex X-Hashcash
+The ``something costly'' is to burn CPU time, more specifically to
+compute a hash collision up to a certain number of bits. The
+resulting hashcash cookie is inserted in a @samp{X-Hashcash:}
+header. For more details, and for the external application
+@code{hashcash} you need to install to use this feature, see
+@uref{http://www.cypherspace.org/~adam/hashcash/}. Even more
+information can be found at @uref{http://www.camram.org/}.
+
+If you wish to call hashcash for each message you send, say something
+like:
+
+@lisp
+(require 'hashcash)
+(add-hook 'message-send-hook 'mail-add-payment)
+@end lisp
+
+The @file{hashcash.el} library can be found in the Gnus development
+contrib directory or at
+@uref{http://users.actrix.gen.nz/mycroft/hashcash.el}.
+
+You will need to set up some additional variables as well:
@table @code
-@item gnus-home-directory
-All Gnus path variables will be initialized from this variable, which
-defaults to @file{~/}.
+@item hashcash-default-payment
+@vindex hashcash-default-payment
+This variable indicates the default number of bits the hash collision
+should consist of. By default this is 0, meaning nothing will be
+done. Suggested useful values include 17 to 29.
+
+@item hashcash-payment-alist
+@vindex hashcash-payment-alist
+Some receivers may require you to spend burn more CPU time than the
+default. This variable contains a list of @samp{(@var{addr}
+@var{amount})} cells, where @var{addr} is the receiver (email address
+or newsgroup) and @var{amount} is the number of bits in the collision
+that is needed. It can also contain @samp{(@var{addr} @var{string}
+@var{amount})} cells, where the @var{string} is the string to use
+(normally the email address or newsgroup name is used).
+
+@item hashcash
+@vindex hashcash
+Where the @code{hashcash} binary is installed.
-@item gnus-directory
-@vindex gnus-directory
-Most Gnus storage path variables will be initialized from this variable,
-which defaults to the @samp{SAVEDIR} environment variable, or
-@file{~/News/} if that variable isn't set.
+@end table
-Note that Gnus is mostly loaded when the @file{.gnus.el} file is read.
-This means that other directory variables that are initialized from this
-variable won't be set properly if you set this variable in
-@file{.gnus.el}. Set this variable in @file{.emacs} instead.
+Currently there is no built in functionality in Gnus to verify
+hashcash cookies, it is expected that this is performed by your hand
+customized mail filtering scripts. Improvements in this area would be
+a useful contribution, however.
-@item gnus-default-directory
-@vindex gnus-default-directory
-Not related to the above variable at all---this variable says what the
-default directory of all Gnus buffers should be. If you issue commands
-like @kbd{C-x C-f}, the prompt you'll get starts in the current buffer's
-default directory. If this variable is @code{nil} (which is the
-default), the default directory will be the default directory of the
-buffer you were in when you started Gnus.
+@node Filtering Spam Using The Spam ELisp Package
+@subsection Filtering Spam Using The Spam ELisp Package
+@cindex spam filtering
+@cindex spam
-@item gnus-verbose
-@vindex gnus-verbose
-This variable is an integer between zero and ten. The higher the value,
-the more messages will be displayed. If this variable is zero, Gnus
-will never flash any messages, if it is seven (which is the default),
-most important messages will be shown, and if it is ten, Gnus won't ever
-shut up, but will flash so many messages it will make your head swim.
+The idea behind @file{spam.el} is to have a control center for spam detection
+and filtering in Gnus. To that end, @file{spam.el} does two things: it
+filters new mail, and it analyzes mail known to be spam or ham.
+@dfn{Ham} is the name used throughout @file{spam.el} to indicate
+non-spam messages.
-@item gnus-verbose-backends
-@vindex gnus-verbose-backends
-This variable works the same way as @code{gnus-verbose}, but it applies
-to the Gnus backends instead of Gnus proper.
+First of all, you @strong{must} run the function
+@code{spam-initialize} to autoload @code{spam.el} and to install the
+@code{spam.el} hooks. There is one exception: if you use the
+@code{spam-use-stat} (@pxref{spam-stat spam filtering}) setting, you
+should turn it on before @code{spam-initialize}:
-@item nnheader-max-head-length
-@vindex nnheader-max-head-length
-When the backends read straight heads of articles, they all try to read
-as little as possible. This variable (default 4096) specifies
-the absolute max length the backends will try to read before giving up
-on finding a separator line between the head and the body. If this
-variable is @code{nil}, there is no upper read bound. If it is
-@code{t}, the backends won't try to read the articles piece by piece,
-but read the entire articles. This makes sense with some versions of
-@code{ange-ftp} or @code{efs}.
+@example
+(setq spam-use-stat t) ;; if needed
+(spam-initialize)
+@end example
-@item nnheader-head-chop-length
-@vindex nnheader-head-chop-length
-This variable (default 2048) says how big a piece of each article to
-read when doing the operation described above.
+So, what happens when you load @file{spam.el}?
-@item nnheader-file-name-translation-alist
-@vindex nnheader-file-name-translation-alist
-@cindex file names
-@cindex invalid characters in file names
-@cindex characters in file names
-This is an alist that says how to translate characters in file names.
-For instance, if @samp{:} is invalid as a file character in file names
-on your system (you OS/2 user you), you could say something like:
+First, some hooks will get installed by @code{spam-initialize}. There
+are some hooks for @code{spam-stat} so it can save its databases, and
+there are hooks so interesting things will happen when you enter and
+leave a group. More on the sequence of events later (@pxref{Spam
+ELisp Package Sequence of Events}).
+
+You get the following keyboard commands:
+
+@table @kbd
+
+@item M-d
+@itemx M s x
+@itemx S x
+@kindex M-d
+@kindex S x
+@kindex M s x
+@findex gnus-summary-mark-as-spam
+@code{gnus-summary-mark-as-spam}.
+
+Mark current article as spam, showing it with the @samp{$} mark.
+Whenever you see a spam article, make sure to mark its summary line
+with @kbd{M-d} before leaving the group. This is done automatically
+for unread articles in @emph{spam} groups.
+
+@item M s t
+@itemx S t
+@kindex M s t
+@kindex S t
+@findex spam-bogofilter-score
+@code{spam-bogofilter-score}.
+
+You must have Bogofilter installed for that command to work properly.
+
+@xref{Bogofilter}.
+
+@end table
+
+Also, when you load @file{spam.el}, you will be able to customize its
+variables. Try @code{customize-group} on the @samp{spam} variable
+group.
+
+@menu
+* Spam ELisp Package Sequence of Events::
+* Spam ELisp Package Filtering of Incoming Mail::
+* Spam ELisp Package Global Variables::
+* Spam ELisp Package Configuration Examples::
+* Blacklists and Whitelists::
+* BBDB Whitelists::
+* Gmane Spam Reporting::
+* Anti-spam Hashcash Payments::
+* Blackholes::
+* Regular Expressions Header Matching::
+* Bogofilter::
+* SpamAssassin backend::
+* ifile spam filtering::
+* spam-stat spam filtering::
+* SpamOracle::
+* Extending the Spam ELisp package::
+@end menu
+
+@node Spam ELisp Package Sequence of Events
+@subsubsection Spam ELisp Package Sequence of Events
+@cindex spam filtering
+@cindex spam filtering sequence of events
+@cindex spam
+
+You must read this section to understand how @code{spam.el} works.
+Do not skip, speed-read, or glance through this section.
+
+There are two @emph{contact points}, if you will, between
+@code{spam.el} and the rest of Gnus: checking new mail for spam, and
+leaving a group.
+
+Getting new mail is done in one of two ways. You can either split
+your incoming mail or you can classify new articles as ham or spam
+when you enter the group.
+
+Splitting incoming mail is better suited to mail backends such as
+@code{nnml} or @code{nnimap} where new mail appears in a single file
+called a @dfn{Spool File}. See @xref{Spam ELisp Package Filtering of
+Incoming Mail}.
+
+@vindex gnus-spam-autodetect
+@vindex gnus-spam-autodetect-methods
+For backends such as @code{nntp} there is no incoming mail spool, so
+an alternate mechanism must be used. This may also happen for
+backends where the server is in charge of splitting incoming mail, and
+Gnus does not do further splitting. The @code{spam-autodetect} and
+@code{spam-autodetect-methods} group parameters (accessible with
+@kbd{G c} and @kbd{G p} as usual), and the corresponding variables
+@code{gnus-spam-autodetect} and @code{gnus-spam-autodetect-methods}
+(accessible with @kbd{M-x customize-variable} as usual) can help.
+
+When @code{spam-autodetect} is used (you can turn it on for a
+group/topic or wholesale by regex, as needed), it hooks into the
+process of entering a group. Thus, entering a group with unseen or
+unread articles becomes the substitute for checking incoming mail.
+Whether only unseen articles or all unread articles will be processed
+is determined by the @code{spam-autodetect-recheck-messages}. When
+set to @code{t}, unread messages will be rechecked.
+
+@code{spam-autodetect} grants the user at once more and less control
+of spam filtering. The user will have more control over each group's
+spam methods, so for instance the @samp{ding} group may have
+@code{spam-use-BBDB} as the autodetection method, while the
+@samp{suspect} group may have the @code{spam-use-blacklist} and
+@code{spam-use-bogofilter} methods enabled. Every article detected to
+be spam will be marked with the spam mark @samp{$} and processed on
+exit from the group as normal spam. The user has less control over
+the @emph{sequence} of checks, as he might with @code{spam-split}.
+
+When the newly split mail goes into groups, or messages are
+autodetected to be ham or spam, those groups must be exited (after
+entering, if needed) for further spam processing to happen. It
+matters whether the group is considered a ham group, a spam group, or
+is unclassified, based on its @code{spam-content} parameter
+(@pxref{Spam ELisp Package Global Variables}). Spam groups have the
+additional characteristic that, when entered, any unseen or unread
+articles (depending on the @code{spam-mark-only-unseen-as-spam}
+variable) will be marked as spam. Thus, mail split into a spam group
+gets automatically marked as spam when you enter the group.
+
+So, when you exit a group, the @code{spam-processors} are applied, if
+any are set, and the processed mail is moved to the
+@code{ham-process-destination} or the @code{spam-process-destination}
+depending on the article's classification. If the
+@code{ham-process-destination} or the @code{spam-process-destination},
+whichever is appropriate, are @code{nil}, the article is left in the
+current group.
+
+If a spam is found in any group (this can be changed to only non-spam
+groups with @code{spam-move-spam-nonspam-groups-only}), it is
+processed by the active @code{spam-processors} (@pxref{Spam ELisp
+Package Global Variables}) when the group is exited. Furthermore, the
+spam is moved to the @code{spam-process-destination} (@pxref{Spam
+ELisp Package Global Variables}) for further training or deletion.
+You have to load the @code{gnus-registry.el} package and enable the
+@code{spam-log-to-registry} variable if you want spam to be processed
+no more than once. Thus, spam is detected and processed everywhere,
+which is what most people want. If the
+@code{spam-process-destination} is @code{nil}, the spam is marked as
+expired, which is usually the right thing to do.
+
+If spam can not be moved---because of a read-only backend such as
+@acronym{NNTP}, for example, it will be copied.
+
+If a ham mail is found in a ham group, as determined by the
+@code{ham-marks} parameter, it is processed as ham by the active ham
+@code{spam-processor} when the group is exited. With the variables
+@code{spam-process-ham-in-spam-groups} and
+@code{spam-process-ham-in-nonham-groups} the behavior can be further
+altered so ham found anywhere can be processed. You have to load the
+@code{gnus-registry.el} package and enable the
+@code{spam-log-to-registry} variable if you want ham to be processed
+no more than once. Thus, ham is detected and processed only when
+necessary, which is what most people want. More on this in
+@xref{Spam ELisp Package Configuration Examples}.
+
+If ham can not be moved---because of a read-only backend such as
+@acronym{NNTP}, for example, it will be copied.
+
+If all this seems confusing, don't worry. Soon it will be as natural
+as typing Lisp one-liners on a neural interface@dots{} err, sorry, that's
+50 years in the future yet. Just trust us, it's not so bad.
+
+@node Spam ELisp Package Filtering of Incoming Mail
+@subsubsection Spam ELisp Package Filtering of Incoming Mail
+@cindex spam filtering
+@cindex spam filtering incoming mail
+@cindex spam
+
+To use the @file{spam.el} facilities for incoming mail filtering, you
+must add the following to your fancy split list
+@code{nnmail-split-fancy} or @code{nnimap-split-fancy}:
+
+@example
+(: spam-split)
+@end example
+
+Note that the fancy split may be called @code{nnmail-split-fancy} or
+@code{nnimap-split-fancy}, depending on whether you use the nnmail or
+nnimap back ends to retrieve your mail.
+
+Also, @code{spam-split} will not modify incoming mail in any way.
+
+The @code{spam-split} function will process incoming mail and send the
+mail considered to be spam into the group name given by the variable
+@code{spam-split-group}. By default that group name is @samp{spam},
+but you can customize @code{spam-split-group}. Make sure the contents
+of @code{spam-split-group} are an @emph{unqualified} group name, for
+instance in an @code{nnimap} server @samp{your-server} the value
+@samp{spam} will turn out to be @samp{nnimap+your-server:spam}. The
+value @samp{nnimap+server:spam}, therefore, is wrong and will
+actually give you the group
+@samp{nnimap+your-server:nnimap+server:spam} which may or may not
+work depending on your server's tolerance for strange group names.
+
+You can also give @code{spam-split} a parameter,
+e.g. @code{spam-use-regex-headers} or @code{"maybe-spam"}. Why is
+this useful?
+
+Take these split rules (with @code{spam-use-regex-headers} and
+@code{spam-use-blackholes} set):
+
+@example
+ nnimap-split-fancy '(|
+ (any "ding" "ding")
+ (: spam-split)
+ ;; @r{default mailbox}
+ "mail")
+@end example
+
+Now, the problem is that you want all ding messages to make it to the
+ding folder. But that will let obvious spam (for example, spam
+detected by SpamAssassin, and @code{spam-use-regex-headers}) through,
+when it's sent to the ding list. On the other hand, some messages to
+the ding list are from a mail server in the blackhole list, so the
+invocation of @code{spam-split} can't be before the ding rule.
+
+You can let SpamAssassin headers supersede ding rules, but all other
+@code{spam-split} rules (including a second invocation of the
+regex-headers check) will be after the ding rule:
+
+@example
+nnimap-split-fancy
+ '(|
+ ;; @r{all spam detected by @code{spam-use-regex-headers} goes to @samp{regex-spam}}
+ (: spam-split "regex-spam" 'spam-use-regex-headers)
+ (any "ding" "ding")
+ ;; @r{all other spam detected by spam-split goes to @code{spam-split-group}}
+ (: spam-split)
+ ;; @r{default mailbox}
+ "mail")
+@end example
+
+This lets you invoke specific @code{spam-split} checks depending on
+your particular needs, and to target the results of those checks to a
+particular spam group. You don't have to throw all mail into all the
+spam tests. Another reason why this is nice is that messages to
+mailing lists you have rules for don't have to have resource-intensive
+blackhole checks performed on them. You could also specify different
+spam checks for your nnmail split vs. your nnimap split. Go crazy.
+
+You should still have specific checks such as
+@code{spam-use-regex-headers} set to @code{t}, even if you
+specifically invoke @code{spam-split} with the check. The reason is
+that when loading @file{spam.el}, some conditional loading is done
+depending on what @code{spam-use-xyz} variables you have set. This
+is usually not critical, though.
+
+@emph{Note for IMAP users}
+
+The boolean variable @code{nnimap-split-download-body} needs to be
+set, if you want to split based on the whole message instead of just
+the headers. By default, the nnimap back end will only retrieve the
+message headers. If you use @code{spam-check-bogofilter},
+@code{spam-check-ifile}, or @code{spam-check-stat} (the splitters that
+can benefit from the full message body), you should set this variable.
+It is not set by default because it will slow @acronym{IMAP} down, and
+that is not an appropriate decision to make on behalf of the user.
+
+@xref{Splitting in IMAP}.
+
+@emph{TODO: spam.el needs to provide a uniform way of training all the
+statistical databases. Some have that functionality built-in, others
+don't.}
+
+@node Spam ELisp Package Global Variables
+@subsubsection Spam ELisp Package Global Variables
+@cindex spam filtering
+@cindex spam filtering variables
+@cindex spam variables
+@cindex spam
+
+@vindex gnus-spam-process-newsgroups
+The concepts of ham processors and spam processors are very important.
+Ham processors and spam processors for a group can be set with the
+@code{spam-process} group parameter, or the
+@code{gnus-spam-process-newsgroups} variable. Ham processors take
+mail known to be non-spam (@emph{ham}) and process it in some way so
+that later similar mail will also be considered non-spam. Spam
+processors take mail known to be spam and process it so similar spam
+will be detected later.
+
+The format of the spam or ham processor entry used to be a symbol,
+but now it is a @sc{cons} cell. See the individual spam processor entries
+for more information.
+
+@vindex gnus-spam-newsgroup-contents
+Gnus learns from the spam you get. You have to collect your spam in
+one or more spam groups, and set or customize the variable
+@code{spam-junk-mailgroups} as appropriate. You can also declare
+groups to contain spam by setting their group parameter
+@code{spam-contents} to @code{gnus-group-spam-classification-spam}, or
+by customizing the corresponding variable
+@code{gnus-spam-newsgroup-contents}. The @code{spam-contents} group
+parameter and the @code{gnus-spam-newsgroup-contents} variable can
+also be used to declare groups as @emph{ham} groups if you set their
+classification to @code{gnus-group-spam-classification-ham}. If
+groups are not classified by means of @code{spam-junk-mailgroups},
+@code{spam-contents}, or @code{gnus-spam-newsgroup-contents}, they are
+considered @emph{unclassified}. All groups are unclassified by
+default.
+
+@vindex gnus-spam-mark
+@cindex $
+In spam groups, all messages are considered to be spam by default:
+they get the @samp{$} mark (@code{gnus-spam-mark}) when you enter the
+group. If you have seen a message, had it marked as spam, then
+unmarked it, it won't be marked as spam when you enter the group
+thereafter. You can disable that behavior, so all unread messages
+will get the @samp{$} mark, if you set the
+@code{spam-mark-only-unseen-as-spam} parameter to @code{nil}. You
+should remove the @samp{$} mark when you are in the group summary
+buffer for every message that is not spam after all. To remove the
+@samp{$} mark, you can use @kbd{M-u} to ``unread'' the article, or
+@kbd{d} for declaring it read the non-spam way. When you leave a
+group, all spam-marked (@samp{$}) articles are sent to a spam
+processor which will study them as spam samples.
+
+Messages may also be deleted in various other ways, and unless
+@code{ham-marks} group parameter gets overridden below, marks @samp{R}
+and @samp{r} for default read or explicit delete, marks @samp{X} and
+@samp{K} for automatic or explicit kills, as well as mark @samp{Y} for
+low scores, are all considered to be associated with articles which
+are not spam. This assumption might be false, in particular if you
+use kill files or score files as means for detecting genuine spam, you
+should then adjust the @code{ham-marks} group parameter.
+
+@defvar ham-marks
+You can customize this group or topic parameter to be the list of
+marks you want to consider ham. By default, the list contains the
+deleted, read, killed, kill-filed, and low-score marks (the idea is
+that these articles have been read, but are not spam). It can be
+useful to also include the tick mark in the ham marks. It is not
+recommended to make the unread mark a ham mark, because it normally
+indicates a lack of classification. But you can do it, and we'll be
+happy for you.
+@end defvar
+
+@defvar spam-marks
+You can customize this group or topic parameter to be the list of
+marks you want to consider spam. By default, the list contains only
+the spam mark. It is not recommended to change that, but you can if
+you really want to.
+@end defvar
+
+When you leave @emph{any} group, regardless of its
+@code{spam-contents} classification, all spam-marked articles are sent
+to a spam processor, which will study these as spam samples. If you
+explicit kill a lot, you might sometimes end up with articles marked
+@samp{K} which you never saw, and which might accidentally contain
+spam. Best is to make sure that real spam is marked with @samp{$},
+and nothing else.
+
+@vindex gnus-ham-process-destinations
+When you leave a @emph{spam} group, all spam-marked articles are
+marked as expired after processing with the spam processor. This is
+not done for @emph{unclassified} or @emph{ham} groups. Also, any
+@strong{ham} articles in a spam group will be moved to a location
+determined by either the @code{ham-process-destination} group
+parameter or a match in the @code{gnus-ham-process-destinations}
+variable, which is a list of regular expressions matched with group
+names (it's easiest to customize this variable with @kbd{M-x
+customize-variable @key{RET} gnus-ham-process-destinations}). Each
+group name list is a standard Lisp list, if you prefer to customize
+the variable manually. If the @code{ham-process-destination}
+parameter is not set, ham articles are left in place. If the
+@code{spam-mark-ham-unread-before-move-from-spam-group} parameter is
+set, the ham articles are marked as unread before being moved.
+
+If ham can not be moved---because of a read-only backend such as
+@acronym{NNTP}, for example, it will be copied.
+
+Note that you can use multiples destinations per group or regular
+expression! This enables you to send your ham to a regular mail
+group and to a @emph{ham training} group.
+
+When you leave a @emph{ham} group, all ham-marked articles are sent to
+a ham processor, which will study these as non-spam samples.
+
+@vindex spam-process-ham-in-spam-groups
+By default the variable @code{spam-process-ham-in-spam-groups} is
+@code{nil}. Set it to @code{t} if you want ham found in spam groups
+to be processed. Normally this is not done, you are expected instead
+to send your ham to a ham group and process it there.
+
+@vindex spam-process-ham-in-nonham-groups
+By default the variable @code{spam-process-ham-in-nonham-groups} is
+@code{nil}. Set it to @code{t} if you want ham found in non-ham (spam
+or unclassified) groups to be processed. Normally this is not done,
+you are expected instead to send your ham to a ham group and process
+it there.
+
+@vindex gnus-spam-process-destinations
+When you leave a @emph{ham} or @emph{unclassified} group, all
+@strong{spam} articles are moved to a location determined by either
+the @code{spam-process-destination} group parameter or a match in the
+@code{gnus-spam-process-destinations} variable, which is a list of
+regular expressions matched with group names (it's easiest to
+customize this variable with @kbd{M-x customize-variable @key{RET}
+gnus-spam-process-destinations}). Each group name list is a standard
+Lisp list, if you prefer to customize the variable manually. If the
+@code{spam-process-destination} parameter is not set, the spam
+articles are only expired. The group name is fully qualified, meaning
+that if you see @samp{nntp:servername} before the group name in the
+group buffer then you need it here as well.
+
+If spam can not be moved---because of a read-only backend such as
+@acronym{NNTP}, for example, it will be copied.
+
+Note that you can use multiples destinations per group or regular
+expression! This enables you to send your spam to multiple @emph{spam
+training} groups.
+
+@vindex spam-log-to-registry
+The problem with processing ham and spam is that Gnus doesn't track
+this processing by default. Enable the @code{spam-log-to-registry}
+variable so @code{spam.el} will use @code{gnus-registry.el} to track
+what articles have been processed, and avoid processing articles
+multiple times. Keep in mind that if you limit the number of registry
+entries, this won't work as well as it does without a limit.
+
+@vindex spam-mark-only-unseen-as-spam
+Set this variable if you want only unseen articles in spam groups to
+be marked as spam. By default, it is set. If you set it to
+@code{nil}, unread articles will also be marked as spam.
+
+@vindex spam-mark-ham-unread-before-move-from-spam-group
+Set this variable if you want ham to be unmarked before it is moved
+out of the spam group. This is very useful when you use something
+like the tick mark @samp{!} to mark ham---the article will be placed
+in your @code{ham-process-destination}, unmarked as if it came fresh
+from the mail server.
+
+@vindex spam-autodetect-recheck-messages
+When autodetecting spam, this variable tells @code{spam.el} whether
+only unseen articles or all unread articles should be checked for
+spam. It is recommended that you leave it off.
+
+@node Spam ELisp Package Configuration Examples
+@subsubsection Spam ELisp Package Configuration Examples
+@cindex spam filtering
+@cindex spam filtering configuration examples
+@cindex spam configuration examples
+@cindex spam
+
+@subsubheading Ted's setup
+
+From Ted Zlatanov <tzz@@lifelogs.com>.
+@example
+;; @r{for @code{gnus-registry-split-fancy-with-parent} and spam autodetection}
+;; @r{see @file{gnus-registry.el} for more information}
+(gnus-registry-initialize)
+(spam-initialize)
+
+;; @r{I like @kbd{C-s} for marking spam}
+(define-key gnus-summary-mode-map "\C-s" 'gnus-summary-mark-as-spam)
+
+(setq
+ spam-log-to-registry t ; @r{for spam autodetection}
+ spam-use-BBDB t
+ spam-use-regex-headers t ; @r{catch X-Spam-Flag (SpamAssassin)}
+ ;; @r{all groups with @samp{spam} in the name contain spam}
+ gnus-spam-newsgroup-contents
+ '(("spam" gnus-group-spam-classification-spam))
+ ;; @r{see documentation for these}
+ spam-move-spam-nonspam-groups-only nil
+ spam-mark-only-unseen-as-spam t
+ spam-mark-ham-unread-before-move-from-spam-group t
+ nnimap-split-rule 'nnimap-split-fancy
+ ;; @r{understand what this does before you copy it to your own setup!}
+ nnimap-split-fancy '(|
+ ;; @r{trace references to parents and put in their group}
+ (: gnus-registry-split-fancy-with-parent)
+ ;; @r{this will catch server-side SpamAssassin tags}
+ (: spam-split 'spam-use-regex-headers)
+ (any "ding" "ding")
+ ;; @r{note that spam by default will go to @samp{spam}}
+ (: spam-split)
+ ;; @r{default mailbox}
+ "mail"))
+
+;; @r{my parameters, set with @kbd{G p}}
+
+;; @r{all nnml groups, and all nnimap groups except}
+;; @r{@samp{nnimap+mail.lifelogs.com:train} and}
+;; @r{@samp{nnimap+mail.lifelogs.com:spam}: any spam goes to nnimap training,}
+;; @r{because it must have been detected manually}
+
+((spam-process-destination . "nnimap+mail.lifelogs.com:train"))
+
+;; @r{all @acronym{NNTP} groups}
+;; @r{autodetect spam with the blacklist and ham with the BBDB}
+((spam-autodetect-methods spam-use-blacklist spam-use-BBDB)
+;; @r{send all spam to the training group}
+ (spam-process-destination . "nnimap+mail.lifelogs.com:train"))
+
+;; @r{only some @acronym{NNTP} groups, where I want to autodetect spam}
+((spam-autodetect . t))
+
+;; @r{my nnimap @samp{nnimap+mail.lifelogs.com:spam} group}
+
+;; @r{this is a spam group}
+((spam-contents gnus-group-spam-classification-spam)
+
+ ;; @r{any spam (which happens when I enter for all unseen messages,}
+ ;; @r{because of the @code{gnus-spam-newsgroup-contents} setting above), goes to}
+ ;; @r{@samp{nnimap+mail.lifelogs.com:train} unless I mark it as ham}
+
+ (spam-process-destination "nnimap+mail.lifelogs.com:train")
+
+ ;; @r{any ham goes to my @samp{nnimap+mail.lifelogs.com:mail} folder, but}
+ ;; @r{also to my @samp{nnimap+mail.lifelogs.com:trainham} folder for training}
+
+ (ham-process-destination "nnimap+mail.lifelogs.com:mail"
+ "nnimap+mail.lifelogs.com:trainham")
+ ;; @r{in this group, only @samp{!} marks are ham}
+ (ham-marks
+ (gnus-ticked-mark))
+ ;; @r{remembers senders in the blacklist on the way out---this is}
+ ;; @r{definitely not needed, it just makes me feel better}
+ (spam-process (gnus-group-spam-exit-processor-blacklist)))
+
+;; @r{Later, on the @acronym{IMAP} server I use the @samp{train} group for training}
+;; @r{SpamAssassin to recognize spam, and the @samp{trainham} group fora}
+;; @r{recognizing ham---but Gnus has nothing to do with it.}
+
+@end example
+
+@subsubheading Using @file{spam.el} on an IMAP server with a statistical filter on the server
+From Reiner Steib <reiner.steib@@gmx.de>.
+
+My provider has set up bogofilter (in combination with @acronym{DCC}) on
+the mail server (@acronym{IMAP}). Recognized spam goes to
+@samp{spam.detected}, the rest goes through the normal filter rules,
+i.e. to @samp{some.folder} or to @samp{INBOX}. Training on false
+positives or negatives is done by copying or moving the article to
+@samp{training.ham} or @samp{training.spam} respectively. A cron job on
+the server feeds those to bogofilter with the suitable ham or spam
+options and deletes them from the @samp{training.ham} and
+@samp{training.spam} folders.
+
+With the following entries in @code{gnus-parameters}, @code{spam.el}
+does most of the job for me:
@lisp
-(setq nnheader-file-name-translation-alist
- '((?: . ?_)))
+ ("nnimap:spam\\.detected"
+ (gnus-article-sort-functions '(gnus-article-sort-by-chars))
+ (ham-process-destination "nnimap:INBOX" "nnimap:training.ham")
+ (spam-contents gnus-group-spam-classification-spam))
+ ("nnimap:\\(INBOX\\|other-folders\\)"
+ (spam-process-destination . "nnimap:training.spam")
+ (spam-contents gnus-group-spam-classification-ham))
@end lisp
-In fact, this is the default value for this variable on OS/2 and MS
-Windows (phooey) systems.
+@itemize
-@item gnus-hidden-properties
-@vindex gnus-hidden-properties
-This is a list of properties to use to hide ``invisible'' text. It is
-@code{(invisible t intangible t)} by default on most systems, which
-makes invisible text invisible and intangible.
+@item @b{The Spam folder:}
-@item gnus-parse-headers-hook
-@vindex gnus-parse-headers-hook
-A hook called before parsing headers. It can be used, for instance, to
-gather statistics on the headers fetched, or perhaps you'd like to prune
-some headers. I don't see why you'd want that, though.
+In the folder @samp{spam.detected}, I have to check for false positives
+(i.e. legitimate mails, that were wrongly judged as spam by
+bogofilter or DCC).
+
+Because of the @code{gnus-group-spam-classification-spam} entry, all
+messages are marked as spam (with @code{$}). When I find a false
+positive, I mark the message with some other ham mark (@code{ham-marks},
+@ref{Spam ELisp Package Global Variables}). On group exit, those
+messages are copied to both groups, @samp{INBOX} (where I want to have
+the article) and @samp{training.ham} (for training bogofilter) and
+deleted from the @samp{spam.detected} folder.
+
+The @code{gnus-article-sort-by-chars} entry simplifies detection of
+false positives for me. I receive lots of worms (sweN, @dots{}), that all
+have a similar size. Grouping them by size (i.e. chars) makes finding
+other false positives easier. (Of course worms aren't @i{spam}
+(@acronym{UCE}, @acronym{UBE}) strictly speaking. Anyhow, bogofilter is
+an excellent tool for filtering those unwanted mails for me.)
+
+@item @b{Ham folders:}
+
+In my ham folders, I just hit @kbd{S x}
+(@code{gnus-summary-mark-as-spam}) whenever I see an unrecognized spam
+mail (false negative). On group exit, those messages are moved to
+@samp{training.ham}.
+@end itemize
+
+@subsubheading Reporting spam articles in Gmane groups with @code{spam-report.el}
+
+From Reiner Steib <reiner.steib@@gmx.de>.
+
+With following entry in @code{gnus-parameters}, @kbd{S x}
+(@code{gnus-summary-mark-as-spam}) marks articles in @code{gmane.*}
+groups as spam and reports the to Gmane at group exit:
+
+@lisp
+ ("^gmane\\."
+ (spam-process (gnus-group-spam-exit-processor-report-gmane)))
+@end lisp
+
+Additionally, I use @code{(setq spam-report-gmane-use-article-number nil)}
+because I don't read the groups directly from news.gmane.org, but
+through my local news server (leafnode). I.e. the article numbers are
+not the same as on news.gmane.org, thus @code{spam-report.el} has to check
+the @code{X-Report-Spam} header to find the correct number.
+
+@node Blacklists and Whitelists
+@subsubsection Blacklists and Whitelists
+@cindex spam filtering
+@cindex whitelists, spam filtering
+@cindex blacklists, spam filtering
+@cindex spam
+
+@defvar spam-use-blacklist
+
+Set this variable to @code{t} if you want to use blacklists when
+splitting incoming mail. Messages whose senders are in the blacklist
+will be sent to the @code{spam-split-group}. This is an explicit
+filter, meaning that it acts only on mail senders @emph{declared} to
+be spammers.
+
+@end defvar
+
+@defvar spam-use-whitelist
+
+Set this variable to @code{t} if you want to use whitelists when
+splitting incoming mail. Messages whose senders are not in the
+whitelist will be sent to the next spam-split rule. This is an
+explicit filter, meaning that unless someone is in the whitelist, their
+messages are not assumed to be spam or ham.
+
+@end defvar
+
+@defvar spam-use-whitelist-exclusive
+
+Set this variable to @code{t} if you want to use whitelists as an
+implicit filter, meaning that every message will be considered spam
+unless the sender is in the whitelist. Use with care.
+
+@end defvar
+
+@defvar gnus-group-spam-exit-processor-blacklist
+
+Add this symbol to a group's @code{spam-process} parameter by
+customizing the group parameters or the
+@code{gnus-spam-process-newsgroups} variable. When this symbol is
+added to a group's @code{spam-process} parameter, the senders of
+spam-marked articles will be added to the blacklist.
+
+@emph{WARNING}
+
+Instead of the obsolete
+@code{gnus-group-spam-exit-processor-blacklist}, it is recommended
+that you use @code{'(spam spam-use-blacklist)}. Everything will work
+the same way, we promise.
+
+@end defvar
+
+@defvar gnus-group-ham-exit-processor-whitelist
+
+Add this symbol to a group's @code{spam-process} parameter by
+customizing the group parameters or the
+@code{gnus-spam-process-newsgroups} variable. When this symbol is
+added to a group's @code{spam-process} parameter, the senders of
+ham-marked articles in @emph{ham} groups will be added to the
+whitelist.
+
+@emph{WARNING}
+
+Instead of the obsolete
+@code{gnus-group-ham-exit-processor-whitelist}, it is recommended
+that you use @code{'(ham spam-use-whitelist)}. Everything will work
+the same way, we promise.
+
+@end defvar
+
+Blacklists are lists of regular expressions matching addresses you
+consider to be spam senders. For instance, to block mail from any
+sender at @samp{vmadmin.com}, you can put @samp{vmadmin.com} in your
+blacklist. You start out with an empty blacklist. Blacklist entries
+use the Emacs regular expression syntax.
+
+Conversely, whitelists tell Gnus what addresses are considered
+legitimate. All messages from whitelisted addresses are considered
+non-spam. Also see @ref{BBDB Whitelists}. Whitelist entries use the
+Emacs regular expression syntax.
+
+The blacklist and whitelist file locations can be customized with the
+@code{spam-directory} variable (@file{~/News/spam} by default), or
+the @code{spam-whitelist} and @code{spam-blacklist} variables
+directly. The whitelist and blacklist files will by default be in the
+@code{spam-directory} directory, named @file{whitelist} and
+@file{blacklist} respectively.
+
+@node BBDB Whitelists
+@subsubsection BBDB Whitelists
+@cindex spam filtering
+@cindex BBDB whitelists, spam filtering
+@cindex BBDB, spam filtering
+@cindex spam
+
+@defvar spam-use-BBDB
+
+Analogous to @code{spam-use-whitelist} (@pxref{Blacklists and
+Whitelists}), but uses the BBDB as the source of whitelisted
+addresses, without regular expressions. You must have the BBDB loaded
+for @code{spam-use-BBDB} to work properly. Messages whose senders are
+not in the BBDB will be sent to the next spam-split rule. This is an
+explicit filter, meaning that unless someone is in the BBDB, their
+messages are not assumed to be spam or ham.
+
+@end defvar
+
+@defvar spam-use-BBDB-exclusive
+
+Set this variable to @code{t} if you want to use the BBDB as an
+implicit filter, meaning that every message will be considered spam
+unless the sender is in the BBDB. Use with care. Only sender
+addresses in the BBDB will be allowed through; all others will be
+classified as spammers.
+
+@end defvar
+
+@defvar gnus-group-ham-exit-processor-BBDB
+
+Add this symbol to a group's @code{spam-process} parameter by
+customizing the group parameters or the
+@code{gnus-spam-process-newsgroups} variable. When this symbol is
+added to a group's @code{spam-process} parameter, the senders of
+ham-marked articles in @emph{ham} groups will be added to the
+BBDB.
+
+@emph{WARNING}
+
+Instead of the obsolete
+@code{gnus-group-ham-exit-processor-BBDB}, it is recommended
+that you use @code{'(ham spam-use-BBDB)}. Everything will work
+the same way, we promise.
+
+@end defvar
+
+@node Gmane Spam Reporting
+@subsubsection Gmane Spam Reporting
+@cindex spam reporting
+@cindex Gmane, spam reporting
+@cindex Gmane, spam reporting
+@cindex spam
+
+@defvar gnus-group-spam-exit-processor-report-gmane
+
+Add this symbol to a group's @code{spam-process} parameter by
+customizing the group parameters or the
+@code{gnus-spam-process-newsgroups} variable. When this symbol is
+added to a group's @code{spam-process} parameter, the spam-marked
+articles groups will be reported to the Gmane administrators via a
+HTTP request.
+
+Gmane can be found at @uref{http://gmane.org}.
+
+@emph{WARNING}
+
+Instead of the obsolete
+@code{gnus-group-spam-exit-processor-report-gmane}, it is recommended
+that you use @code{'(spam spam-use-gmane)}. Everything will work the
+same way, we promise.
+
+@end defvar
+
+@defvar spam-report-gmane-use-article-number
+
+This variable is @code{t} by default. Set it to @code{nil} if you are
+running your own news server, for instance, and the local article
+numbers don't correspond to the Gmane article numbers. When
+@code{spam-report-gmane-use-article-number} is @code{nil},
+@code{spam-report.el} will use the @code{X-Report-Spam} header that
+Gmane provides.
+
+@end defvar
+
+@node Anti-spam Hashcash Payments
+@subsubsection Anti-spam Hashcash Payments
+@cindex spam filtering
+@cindex hashcash, spam filtering
+@cindex spam
+
+@defvar spam-use-hashcash
+
+Similar to @code{spam-use-whitelist} (@pxref{Blacklists and
+Whitelists}), but uses hashcash tokens for whitelisting messages
+instead of the sender address. You must have the @code{hashcash.el}
+package loaded for @code{spam-use-hashcash} to work properly.
+Messages without a hashcash payment token will be sent to the next
+spam-split rule. This is an explicit filter, meaning that unless a
+hashcash token is found, the messages are not assumed to be spam or
+ham.
+
+@end defvar
+
+@node Blackholes
+@subsubsection Blackholes
+@cindex spam filtering
+@cindex blackholes, spam filtering
+@cindex spam
+
+@defvar spam-use-blackholes
+
+This option is disabled by default. You can let Gnus consult the
+blackhole-type distributed spam processing systems (DCC, for instance)
+when you set this option. The variable @code{spam-blackhole-servers}
+holds the list of blackhole servers Gnus will consult. The current
+list is fairly comprehensive, but make sure to let us know if it
+contains outdated servers.
+
+The blackhole check uses the @code{dig.el} package, but you can tell
+@file{spam.el} to use @code{dns.el} instead for better performance if
+you set @code{spam-use-dig} to @code{nil}. It is not recommended at
+this time to set @code{spam-use-dig} to @code{nil} despite the
+possible performance improvements, because some users may be unable to
+use it, but you can try it and see if it works for you.
+
+@end defvar
+
+@defvar spam-blackhole-servers
+
+The list of servers to consult for blackhole checks.
+
+@end defvar
+
+@defvar spam-blackhole-good-server-regex
+
+A regular expression for IPs that should not be checked against the
+blackhole server list. When set to @code{nil}, it has no effect.
+
+@end defvar
+
+@defvar spam-use-dig
+
+Use the @code{dig.el} package instead of the @code{dns.el} package.
+The default setting of @code{t} is recommended.
+
+@end defvar
+
+Blackhole checks are done only on incoming mail. There is no spam or
+ham processor for blackholes.
+
+@node Regular Expressions Header Matching
+@subsubsection Regular Expressions Header Matching
+@cindex spam filtering
+@cindex regular expressions header matching, spam filtering
+@cindex spam
+
+@defvar spam-use-regex-headers
+
+This option is disabled by default. You can let Gnus check the
+message headers against lists of regular expressions when you set this
+option. The variables @code{spam-regex-headers-spam} and
+@code{spam-regex-headers-ham} hold the list of regular expressions.
+Gnus will check against the message headers to determine if the
+message is spam or ham, respectively.
+
+@end defvar
+
+@defvar spam-regex-headers-spam
+
+The list of regular expressions that, when matched in the headers of
+the message, positively identify it as spam.
+
+@end defvar
+
+@defvar spam-regex-headers-ham
+
+The list of regular expressions that, when matched in the headers of
+the message, positively identify it as ham.
+
+@end defvar
-@item gnus-shell-command-separator
-@vindex gnus-shell-command-separator
-String used to separate two shell commands. The default is @samp{;}.
+Regular expression header checks are done only on incoming mail.
+There is no specific spam or ham processor for regular expressions.
+@node Bogofilter
+@subsubsection Bogofilter
+@cindex spam filtering
+@cindex bogofilter, spam filtering
+@cindex spam
-@end table
+@defvar spam-use-bogofilter
+Set this variable if you want @code{spam-split} to use Eric Raymond's
+speedy Bogofilter.
-@node The End
-@chapter The End
+With a minimum of care for associating the @samp{$} mark for spam
+articles only, Bogofilter training all gets fairly automatic. You
+should do this until you get a few hundreds of articles in each
+category, spam or not. The command @kbd{S t} in summary mode, either
+for debugging or for curiosity, shows the @emph{spamicity} score of
+the current article (between 0.0 and 1.0).
-Well, that's the manual---you can get on with your life now. Keep in
-touch. Say hello to your cats from me.
+Bogofilter determines if a message is spam based on a specific
+threshold. That threshold can be customized, consult the Bogofilter
+documentation.
-My @strong{ghod}---I just can't stand goodbyes. Sniffle.
+If the @code{bogofilter} executable is not in your path, Bogofilter
+processing will be turned off.
-Ol' Charles Reznikoff said it pretty well, so I leave the floor to him:
+You should not enable this if you use @code{spam-use-bogofilter-headers}.
-@quotation
-@strong{Te Deum}
+@end defvar
-@sp 1
-Not because of victories @*
-I sing,@*
-having none,@*
-but for the common sunshine,@*
-the breeze,@*
-the largess of the spring.
+@defvar spam-use-bogofilter-headers
-@sp 1
-Not for victory@*
-but for the day's work done@*
-as well as I was able;@*
-not for a seat upon the dais@*
-but at the common table.@*
-@end quotation
+Set this variable if you want @code{spam-split} to use Eric Raymond's
+speedy Bogofilter, looking only at the message headers. It works
+similarly to @code{spam-use-bogofilter}, but the @code{X-Bogosity} header
+must be in the message already. Normally you would do this with a
+procmail recipe or something similar; consult the Bogofilter
+installation documents for details.
+You should not enable this if you use @code{spam-use-bogofilter}.
-@node Appendices
-@chapter Appendices
+@end defvar
-@menu
-* History:: How Gnus got where it is today.
-* Terminology:: We use really difficult, like, words here.
-* Customization:: Tailoring Gnus to your needs.
-* Troubleshooting:: What you might try if things do not work.
-* Gnus Reference Guide:: Rilly, rilly technical stuff.
-* Emacs for Heathens:: A short introduction to Emacsian terms.
-* Frequently Asked Questions:: A question-and-answer session.
-@end menu
+@defvar gnus-group-spam-exit-processor-bogofilter
+Add this symbol to a group's @code{spam-process} parameter by
+customizing the group parameters or the
+@code{gnus-spam-process-newsgroups} variable. When this symbol is
+added to a group's @code{spam-process} parameter, spam-marked articles
+will be added to the Bogofilter spam database.
+@emph{WARNING}
-@node History
-@section History
+Instead of the obsolete
+@code{gnus-group-spam-exit-processor-bogofilter}, it is recommended
+that you use @code{'(spam spam-use-bogofilter)}. Everything will work
+the same way, we promise.
+@end defvar
-@cindex history
-@sc{gnus} was written by Masanobu @sc{Umeda}. When autumn crept up in
-'94, Lars Magne Ingebrigtsen grew bored and decided to rewrite Gnus.
+@defvar gnus-group-ham-exit-processor-bogofilter
+Add this symbol to a group's @code{spam-process} parameter by
+customizing the group parameters or the
+@code{gnus-spam-process-newsgroups} variable. When this symbol is
+added to a group's @code{spam-process} parameter, the ham-marked
+articles in @emph{ham} groups will be added to the Bogofilter database
+of non-spam messages.
-If you want to investigate the person responsible for this outrage, you
-can point your (feh!) web browser to
-@file{http://www.stud.ifi.uio.no/~larsi/}. This is also the primary
-distribution point for the new and spiffy versions of Gnus, and is known
-as The Site That Destroys Newsrcs And Drives People Mad.
+@emph{WARNING}
-During the first extended alpha period of development, the new Gnus was
-called ``(ding) Gnus''. @dfn{(ding)} is, of course, short for
-@dfn{ding is not Gnus}, which is a total and utter lie, but who cares?
-(Besides, the ``Gnus'' in this abbreviation should probably be
-pronounced ``news'' as @sc{Umeda} intended, which makes it a more
-appropriate name, don't you think?)
+Instead of the obsolete
+@code{gnus-group-ham-exit-processor-bogofilter}, it is recommended
+that you use @code{'(ham spam-use-bogofilter)}. Everything will work
+the same way, we promise.
+@end defvar
-In any case, after spending all that energy on coming up with a new and
-spunky name, we decided that the name was @emph{too} spunky, so we
-renamed it back again to ``Gnus''. But in mixed case. ``Gnus'' vs.
-``@sc{gnus}''. New vs. old.
+@defvar spam-bogofilter-database-directory
-The first ``proper'' release of Gnus 5 was done in November 1995 when it
-was included in the Emacs 19.30 distribution (132 (ding) Gnus releases
-plus 15 Gnus 5.0 releases).
+This is the directory where Bogofilter will store its databases. It
+is not specified by default, so Bogofilter will use its own default
+database directory.
-In May 1996 the next Gnus generation (aka. ``September Gnus'' (after 99
-releases)) was released under the name ``Gnus 5.2'' (40 releases).
+@end defvar
-On July 28th 1996 work on Red Gnus was begun, and it was released on
-January 25th 1997 (after 84 releases) as ``Gnus 5.4'' (67 releases).
+The Bogofilter mail classifier is similar to @command{ifile} in intent and
+purpose. A ham and a spam processor are provided, plus the
+@code{spam-use-bogofilter} and @code{spam-use-bogofilter-headers}
+variables to indicate to spam-split that Bogofilter should either be
+used, or has already been used on the article. The 0.9.2.1 version of
+Bogofilter was used to test this functionality.
-On September 13th 1997, Quassia Gnus was started and lasted 37
-releases. If was released as ``Gnus 5.6 on March 8th 1998.
+@node SpamAssassin backend
+@subsubsection SpamAssassin backend
+@cindex spam filtering
+@cindex spamassassin, spam filtering
+@cindex spam
-If you happen upon a version of Gnus that has a prefixed name --
-``(ding) Gnus'', ``September Gnus'', ``Red Gnus'', ``Quassia Gnus'' --
-don't panic. Don't let it know that you're frightened. Back away.
-Slowly. Whatever you do, don't run. Walk away, calmly, until you're
-out of its reach. Find a proper released version of Gnus and snuggle up
-to that instead.
+@defvar spam-use-spamassassin
-@menu
-* Why?:: What's the point of Gnus?
-* Compatibility:: Just how compatible is Gnus with @sc{gnus}?
-* Conformity:: Gnus tries to conform to all standards.
-* Emacsen:: Gnus can be run on a few modern Emacsen.
-* Contributors:: Oodles of people.
-* New Features:: Pointers to some of the new stuff in Gnus.
-* Newest Features:: Features so new that they haven't been written yet.
-@end menu
+Set this variable if you want @code{spam-split} to use SpamAssassin.
+SpamAssassin assigns a score to each article based on a set of rules
+and tests, including a Bayesian filter. The Bayesian filter can be
+trained by associating the @samp{$} mark for spam articles. The
+spam score can be viewed by using the command @kbd{S t} in summary
+mode.
-@node Why?
-@subsection Why?
+If you set this variable, each article will be processed by
+SpamAssassin when @code{spam-split} is called. If your mail is
+preprocessed by SpamAssassin, and you want to just use the
+SpamAssassin headers, set @code{spam-use-spamassassin-headers}
+instead.
-What's the point of Gnus?
+You should not enable this is you use
+@code{spam-use-spamassassin-headers}.
-I want to provide a ``rad'', ``happening'', ``way cool'' and ``hep''
-newsreader, that lets you do anything you can think of. That was my
-original motivation, but while working on Gnus, it has become clear to
-me that this generation of newsreaders really belong in the stone age.
-Newsreaders haven't developed much since the infancy of the net. If the
-volume continues to rise with the current rate of increase, all current
-newsreaders will be pretty much useless. How do you deal with
-newsgroups that have thousands of new articles each day? How do you
-keep track of millions of people who post?
+@end defvar
-Gnus offers no real solutions to these questions, but I would very much
-like to see Gnus being used as a testing ground for new methods of
-reading and fetching news. Expanding on @sc{Umeda}-san's wise decision
-to separate the newsreader from the backends, Gnus now offers a simple
-interface for anybody who wants to write new backends for fetching mail
-and news from different sources. I have added hooks for customizations
-everywhere I could imagine it being useful. By doing so, I'm inviting
-every one of you to explore and invent.
+@defvar spam-use-spamassassin-headers
-May Gnus never be complete. @kbd{C-u 100 M-x all-hail-emacs} and
-@kbd{C-u 100 M-x all-hail-xemacs}.
+Set this variable if your mail is preprocessed by SpamAssassin and
+want @code{spam-split} to split based on the SpamAssassin headers.
+You should not enable this is you use @code{spam-use-spamassassin}.
-@node Compatibility
-@subsection Compatibility
+@end defvar
-@cindex compatibility
-Gnus was designed to be fully compatible with @sc{gnus}. Almost all key
-bindings have been kept. More key bindings have been added, of course,
-but only in one or two obscure cases have old bindings been changed.
+@defvar spam-spamassassin-path
-Our motto is:
-@quotation
-@cartouche
-@center In a cloud bones of steel.
-@end cartouche
-@end quotation
+This variable points to the SpamAssassin executable. If you have
+@code{spamd} running, you can set this variable to the @code{spamc}
+executable for faster processing. See the SpamAssassin documentation
+for more information on @code{spamd}/@code{spamc}.
-All commands have kept their names. Some internal functions have changed
-their names.
+@end defvar
-The @code{gnus-uu} package has changed drastically. @xref{Decoding
-Articles}.
+SpamAssassin is a powerful and flexible spam filter that uses a wide
+variety of tests to identify spam. A ham and a spam processors are
+provided, plus the @code{spam-use-spamassassin} and
+@code{spam-use-spamassassin-headers} variables to indicate to
+spam-split that SpamAssassin should be either used, or has already
+been used on the article. The 2.63 version of SpamAssassin was used
+to test this functionality.
-One major compatibility question is the presence of several summary
-buffers. All variables relevant while reading a group are
-buffer-local to the summary buffer they belong in. Although many
-important variables have their values copied into their global
-counterparts whenever a command is executed in the summary buffer, this
-change might lead to incorrect values being used unless you are careful.
+@node ifile spam filtering
+@subsubsection ifile spam filtering
+@cindex spam filtering
+@cindex ifile, spam filtering
+@cindex spam
-All code that relies on knowledge of @sc{gnus} internals will probably
-fail. To take two examples: Sorting @code{gnus-newsrc-alist} (or
-changing it in any way, as a matter of fact) is strictly verboten. Gnus
-maintains a hash table that points to the entries in this alist (which
-speeds up many functions), and changing the alist directly will lead to
-peculiar results.
+@defvar spam-use-ifile
-@cindex hilit19
-@cindex highlighting
-Old hilit19 code does not work at all. In fact, you should probably
-remove all hilit code from all Gnus hooks
-(@code{gnus-group-prepare-hook} and @code{gnus-summary-prepare-hook}).
-Gnus provides various integrated functions for highlighting. These are
-faster and more accurate. To make life easier for everybody, Gnus will
-by default remove all hilit calls from all hilit hooks. Uncleanliness!
-Away!
+Enable this variable if you want @code{spam-split} to use @command{ifile}, a
+statistical analyzer similar to Bogofilter.
-Packages like @code{expire-kill} will no longer work. As a matter of
-fact, you should probably remove all old @sc{gnus} packages (and other
-code) when you start using Gnus. More likely than not, Gnus already
-does what you have written code to make @sc{gnus} do. (Snicker.)
+@end defvar
-Even though old methods of doing things are still supported, only the
-new methods are documented in this manual. If you detect a new method of
-doing something while reading this manual, that does not mean you have
-to stop doing it the old way.
+@defvar spam-ifile-all-categories
-Gnus understands all @sc{gnus} startup files.
+Enable this variable if you want @code{spam-use-ifile} to give you all
+the ifile categories, not just spam/non-spam. If you use this, make
+sure you train ifile as described in its documentation.
-@kindex M-x gnus-bug
-@findex gnus-bug
-@cindex reporting bugs
-@cindex bugs
-Overall, a casual user who hasn't written much code that depends on
-@sc{gnus} internals should suffer no problems. If problems occur,
-please let me know by issuing that magic command @kbd{M-x gnus-bug}.
+@end defvar
-@vindex gnus-bug-create-help-buffer
-If you are in the habit of sending bug reports @emph{very} often, you
-may find the helpful help buffer annoying after a while. If so, set
-@code{gnus-bug-create-help-buffer} to @code{nil} to avoid having it pop
-up at you.
+@defvar spam-ifile-spam-category
+This is the category of spam messages as far as ifile is concerned.
+The actual string used is irrelevant, but you probably want to leave
+the default value of @samp{spam}.
+@end defvar
-@node Conformity
-@subsection Conformity
+@defvar spam-ifile-database-path
-No rebels without a clue here, ma'am. We conform to all standards known
-to (wo)man. Except for those standards and/or conventions we disagree
-with, of course.
+This is the filename for the ifile database. It is not specified by
+default, so ifile will use its own default database name.
-@table @strong
+@end defvar
-@item RFC 822
-@cindex RFC 822
-There are no known breaches of this standard.
+The ifile mail classifier is similar to Bogofilter in intent and
+purpose. A ham and a spam processor are provided, plus the
+@code{spam-use-ifile} variable to indicate to spam-split that ifile
+should be used. The 1.2.1 version of ifile was used to test this
+functionality.
-@item RFC 1036
-@cindex RFC 1036
-There are no known breaches of this standard, either.
+@node spam-stat spam filtering
+@subsubsection spam-stat spam filtering
+@cindex spam filtering
+@cindex spam-stat, spam filtering
+@cindex spam-stat
+@cindex spam
-@item Son-of-RFC 1036
-@cindex Son-of-RFC 1036
-We do have some breaches to this one.
+@xref{Filtering Spam Using Statistics with spam-stat}.
-@table @emph
+@defvar spam-use-stat
-@item X-Newsreader
-This is considered to be a ``vanity header'', while I consider it to be
-consumer information. After seeing so many badly formatted articles
-coming from @code{tin} and @code{Netscape} I know not to use either of
-those for posting articles. I would not have known that if it wasn't
-for the @code{X-Newsreader} header.
-@end table
+Enable this variable if you want @code{spam-split} to use
+spam-stat.el, an Emacs Lisp statistical analyzer.
-@item USEFOR
-@cindex USEFOR
-USEFOR is an IETF working group writing a successor to RFC 1036, based
-on Son-of-RFC 1036. They have produced a number of drafts proposing
-various changes to the format of news articles. The Gnus towers will
-look into implementing the changes when the draft is accepted as an RFC.
+@end defvar
-@end table
+@defvar gnus-group-spam-exit-processor-stat
+Add this symbol to a group's @code{spam-process} parameter by
+customizing the group parameters or the
+@code{gnus-spam-process-newsgroups} variable. When this symbol is
+added to a group's @code{spam-process} parameter, the spam-marked
+articles will be added to the spam-stat database of spam messages.
-If you ever notice Gnus acting non-compliant with regards to the texts
-mentioned above, don't hesitate to drop a note to Gnus Towers and let us
-know.
+@emph{WARNING}
+Instead of the obsolete
+@code{gnus-group-spam-exit-processor-stat}, it is recommended
+that you use @code{'(spam spam-use-stat)}. Everything will work
+the same way, we promise.
+@end defvar
-@node Emacsen
-@subsection Emacsen
-@cindex Emacsen
-@cindex XEmacs
-@cindex Mule
-@cindex Emacs
+@defvar gnus-group-ham-exit-processor-stat
+Add this symbol to a group's @code{spam-process} parameter by
+customizing the group parameters or the
+@code{gnus-spam-process-newsgroups} variable. When this symbol is
+added to a group's @code{spam-process} parameter, the ham-marked
+articles in @emph{ham} groups will be added to the spam-stat database
+of non-spam messages.
-Gnus should work on :
+@emph{WARNING}
-@itemize @bullet
+Instead of the obsolete
+@code{gnus-group-ham-exit-processor-stat}, it is recommended
+that you use @code{'(ham spam-use-stat)}. Everything will work
+the same way, we promise.
+@end defvar
-@item
-Emacs 20.3 and up.
+This enables @file{spam.el} to cooperate with @file{spam-stat.el}.
+@file{spam-stat.el} provides an internal (Lisp-only) spam database,
+which unlike ifile or Bogofilter does not require external programs.
+A spam and a ham processor, and the @code{spam-use-stat} variable for
+@code{spam-split} are provided.
-@item
-XEmacs 20.4 and up.
+@node SpamOracle
+@subsubsection Using SpamOracle with Gnus
+@cindex spam filtering
+@cindex SpamOracle
+@cindex spam
-@end itemize
+An easy way to filter out spam is to use SpamOracle. SpamOracle is an
+statistical mail filtering tool written by Xavier Leroy and needs to be
+installed separately.
-This Gnus version will absolutely not work on any Emacsen older than
-that. Not reliably, at least. Older versions of Gnus may work on older
-Emacs versions.
+There are several ways to use SpamOracle with Gnus. In all cases, your
+mail is piped through SpamOracle in its @emph{mark} mode. SpamOracle will
+then enter an @samp{X-Spam} header indicating whether it regards the
+mail as a spam mail or not.
-There are some vague differences between Gnus on the various
-platforms---XEmacs features more graphics (a logo and a toolbar)---but
-other than that, things should look pretty much the same under all
-Emacsen.
+One possibility is to run SpamOracle as a @code{:prescript} from the
+@xref{Mail Source Specifiers}, (@pxref{SpamAssassin}). This method has
+the advantage that the user can see the @emph{X-Spam} headers.
+The easiest method is to make @file{spam.el} (@pxref{Filtering Spam
+Using The Spam ELisp Package}) call SpamOracle.
-@node Contributors
-@subsection Contributors
-@cindex contributors
+@vindex spam-use-spamoracle
+To enable SpamOracle usage by @file{spam.el}, set the variable
+@code{spam-use-spamoracle} to @code{t} and configure the
+@code{nnmail-split-fancy} or @code{nnimap-split-fancy} as described in
+the section @xref{Filtering Spam Using The Spam ELisp Package}. In
+this example the @samp{INBOX} of an nnimap server is filtered using
+SpamOracle. Mails recognized as spam mails will be moved to
+@code{spam-split-group}, @samp{Junk} in this case. Ham messages stay
+in @samp{INBOX}:
-The new Gnus version couldn't have been done without the help of all the
-people on the (ding) mailing list. Every day for over a year I have
-gotten billions of nice bug reports from them, filling me with joy,
-every single one of them. Smooches. The people on the list have been
-tried beyond endurance, what with my ``oh, that's a neat idea <type
-type>, yup, I'll release it right away <ship off> no wait, that doesn't
-work at all <type type>, yup, I'll ship that one off right away <ship
-off> no, wait, that absolutely does not work'' policy for releases.
-Micro$oft---bah. Amateurs. I'm @emph{much} worse. (Or is that
-``worser''? ``much worser''? ``worsest''?)
+@example
+(setq spam-use-spamoracle t
+ spam-split-group "Junk"
+ nnimap-split-inbox '("INBOX")
+ nnimap-split-rule 'nnimap-split-fancy
+ nnimap-split-fancy '(| (: spam-split) "INBOX"))
+@end example
-I would like to take this opportunity to thank the Academy for... oops,
-wrong show.
+@defvar spam-use-spamoracle
+Set to @code{t} if you want Gnus to enable spam filtering using
+SpamOracle.
+@end defvar
+
+@defvar spam-spamoracle-binary
+Gnus uses the SpamOracle binary called @file{spamoracle} found in the
+user's PATH. Using the variable @code{spam-spamoracle-binary}, this
+can be customized.
+@end defvar
+
+@defvar spam-spamoracle-database
+By default, SpamOracle uses the file @file{~/.spamoracle.db} as a database to
+store its analyses. This is controlled by the variable
+@code{spam-spamoracle-database} which defaults to @code{nil}. That means
+the default SpamOracle database will be used. In case you want your
+database to live somewhere special, set
+@code{spam-spamoracle-database} to this path.
+@end defvar
+
+SpamOracle employs a statistical algorithm to determine whether a
+message is spam or ham. In order to get good results, meaning few
+false hits or misses, SpamOracle needs training. SpamOracle learns the
+characteristics of your spam mails. Using the @emph{add} mode
+(training mode) one has to feed good (ham) and spam mails to
+SpamOracle. This can be done by pressing @kbd{|} in the Summary buffer
+and pipe the mail to a SpamOracle process or using @file{spam.el}'s
+spam- and ham-processors, which is much more convenient. For a
+detailed description of spam- and ham-processors, @xref{Filtering Spam
+Using The Spam ELisp Package}.
+
+@defvar gnus-group-spam-exit-processor-spamoracle
+Add this symbol to a group's @code{spam-process} parameter by
+customizing the group parameter or the
+@code{gnus-spam-process-newsgroups} variable. When this symbol is added
+to a group's @code{spam-process} parameter, spam-marked articles will be
+sent to SpamOracle as spam samples.
+
+@emph{WARNING}
+
+Instead of the obsolete
+@code{gnus-group-spam-exit-processor-spamoracle}, it is recommended
+that you use @code{'(spam spam-use-spamoracle)}. Everything will work
+the same way, we promise.
+@end defvar
+
+@defvar gnus-group-ham-exit-processor-spamoracle
+Add this symbol to a group's @code{spam-process} parameter by
+customizing the group parameter or the
+@code{gnus-spam-process-newsgroups} variable. When this symbol is added
+to a group's @code{spam-process} parameter, the ham-marked articles in
+@emph{ham} groups will be sent to the SpamOracle as samples of ham
+messages.
+
+@emph{WARNING}
+
+Instead of the obsolete
+@code{gnus-group-ham-exit-processor-spamoracle}, it is recommended
+that you use @code{'(ham spam-use-spamoracle)}. Everything will work
+the same way, we promise.
+@end defvar
+
+@emph{Example:} These are the Group Parameters of a group that has been
+classified as a ham group, meaning that it should only contain ham
+messages.
+@example
+ ((spam-contents gnus-group-spam-classification-ham)
+ (spam-process ((ham spam-use-spamoracle)
+ (spam spam-use-spamoracle))))
+@end example
+For this group the @code{spam-use-spamoracle} is installed for both
+ham and spam processing. If the group contains spam message
+(e.g. because SpamOracle has not had enough sample messages yet) and
+the user marks some messages as spam messages, these messages will be
+processed by SpamOracle. The processor sends the messages to
+SpamOracle as new samples for spam.
+
+@node Extending the Spam ELisp package
+@subsubsection Extending the Spam ELisp package
+@cindex spam filtering
+@cindex spam elisp package, extending
+@cindex extending the spam elisp package
+
+Say you want to add a new back end called blackbox. For filtering
+incoming mail, provide the following:
-@itemize @bullet
+@enumerate
@item
-Masanobu @sc{Umeda}---the writer of the original @sc{gnus}.
+Code
-@item
-Per Abrahamsen---custom, scoring, highlighting and @sc{soup} code (as
-well as numerous other things).
+@lisp
+(defvar spam-use-blackbox nil
+ "True if blackbox should be used.")
+@end lisp
-@item
-Luis Fernandes---design and graphics.
+Add
+@lisp
+(spam-use-blackbox . spam-check-blackbox)
+@end lisp
+to @code{spam-list-of-checks}.
-@item
-Erik Naggum---help, ideas, support, code and stuff.
+Add
+@lisp
+(gnus-group-ham-exit-processor-blackbox ham spam-use-blackbox)
+(gnus-group-spam-exit-processor-blackbox spam spam-use-blackbox)
+@end lisp
-@item
-Shenghuo Zhu---uudecode.el, mm-uu.el, rfc1843.el and many other things
-connected with @sc{mime} and other types of en/decoding.
+to @code{spam-list-of-processors}.
-@item
-Wes Hardaker---@file{gnus-picon.el} and the manual section on
-@dfn{picons} (@pxref{Picons}).
+Add
+@lisp
+(spam-use-blackbox spam-blackbox-register-routine
+ nil
+ spam-blackbox-unregister-routine
+ nil)
+@end lisp
-@item
-Kim-Minh Kaplan---further work on the picon code.
+to @code{spam-registration-functions}. Write the register/unregister
+routines using the bogofilter register/unregister routines as a
+start, or other restister/unregister routines more appropriate to
+Blackbox.
@item
-Brad Miller---@file{gnus-gl.el} and the GroupLens manual section
-(@pxref{GroupLens}).
+Functionality
-@item
-Sudish Joseph---innumerable bug fixes.
+Write the @code{spam-check-blackbox} function. It should return
+@samp{nil} or @code{spam-split-group}, observing the other
+conventions. See the existing @code{spam-check-*} functions for
+examples of what you can do, and stick to the template unless you
+fully understand the reasons why you aren't.
-@item
-Ilja Weis---@file{gnus-topic.el}.
+Make sure to add @code{spam-use-blackbox} to
+@code{spam-list-of-statistical-checks} if Blackbox is a statistical
+mail analyzer that needs the full message body to operate.
-@item
-Steven L. Baur---lots and lots and lots of bugs detections and fixes.
+@end enumerate
-@item
-Vladimir Alexiev---the refcard and reference booklets.
+For processing spam and ham messages, provide the following:
-@item
-Felix Lee & Jamie Zawinski---I stole some pieces from the XGnus
-distribution by Felix Lee and JWZ.
+@enumerate
@item
-Scott Byer---@file{nnfolder.el} enhancements & rewrite.
+Code
+
+Note you don't have to provide a spam or a ham processor. Only
+provide them if Blackbox supports spam or ham processing.
+
+Also, ham and spam processors are being phased out as single
+variables. Instead the form @code{'(spam spam-use-blackbox)} or
+@code{'(ham spam-use-blackbox)} is favored. For now, spam/ham
+processor variables are still around but they won't be for long.
+
+@lisp
+(defvar gnus-group-spam-exit-processor-blackbox "blackbox-spam"
+ "The Blackbox summary exit spam processor.
+Only applicable to spam groups.")
+
+(defvar gnus-group-ham-exit-processor-blackbox "blackbox-ham"
+ "The whitelist summary exit ham processor.
+Only applicable to non-spam (unclassified and ham) groups.")
+
+@end lisp
@item
-Peter Mutsaers---orphan article scoring code.
+Gnus parameters
+
+Add
+@lisp
+(const :tag "Spam: Blackbox" (spam spam-use-blackbox))
+(const :tag "Ham: Blackbox" (ham spam-use-blackbox))
+@end lisp
+to the @code{spam-process} group parameter in @code{gnus.el}. Make
+sure you do it twice, once for the parameter and once for the
+variable customization.
+
+Add
+@lisp
+(variable-item spam-use-blackbox)
+@end lisp
+to the @code{spam-autodetect-methods} group parameter in
+@code{gnus.el}.
+
+@end enumerate
+
+
+@node Filtering Spam Using Statistics with spam-stat
+@subsection Filtering Spam Using Statistics with spam-stat
+@cindex Paul Graham
+@cindex Graham, Paul
+@cindex naive Bayesian spam filtering
+@cindex Bayesian spam filtering, naive
+@cindex spam filtering, naive Bayesian
+
+Paul Graham has written an excellent essay about spam filtering using
+statistics: @uref{http://www.paulgraham.com/spam.html,A Plan for
+Spam}. In it he describes the inherent deficiency of rule-based
+filtering as used by SpamAssassin, for example: Somebody has to write
+the rules, and everybody else has to install these rules. You are
+always late. It would be much better, he argues, to filter mail based
+on whether it somehow resembles spam or non-spam. One way to measure
+this is word distribution. He then goes on to describe a solution
+that checks whether a new mail resembles any of your other spam mails
+or not.
+
+The basic idea is this: Create a two collections of your mail, one
+with spam, one with non-spam. Count how often each word appears in
+either collection, weight this by the total number of mails in the
+collections, and store this information in a dictionary. For every
+word in a new mail, determine its probability to belong to a spam or a
+non-spam mail. Use the 15 most conspicuous words, compute the total
+probability of the mail being spam. If this probability is higher
+than a certain threshold, the mail is considered to be spam.
+
+Gnus supports this kind of filtering. But it needs some setting up.
+First, you need two collections of your mail, one with spam, one with
+non-spam. Then you need to create a dictionary using these two
+collections, and save it. And last but not least, you need to use
+this dictionary in your fancy mail splitting rules.
+
+@menu
+* Creating a spam-stat dictionary::
+* Splitting mail using spam-stat::
+* Low-level interface to the spam-stat dictionary::
+@end menu
-@item
-Ken Raeburn---POP mail support.
+@node Creating a spam-stat dictionary
+@subsubsection Creating a spam-stat dictionary
+
+Before you can begin to filter spam based on statistics, you must
+create these statistics based on two mail collections, one with spam,
+one with non-spam. These statistics are then stored in a dictionary
+for later use. In order for these statistics to be meaningful, you
+need several hundred emails in both collections.
+
+Gnus currently supports only the nnml back end for automated dictionary
+creation. The nnml back end stores all mails in a directory, one file
+per mail. Use the following:
+
+@defun spam-stat-process-spam-directory
+Create spam statistics for every file in this directory. Every file
+is treated as one spam mail.
+@end defun
+
+@defun spam-stat-process-non-spam-directory
+Create non-spam statistics for every file in this directory. Every
+file is treated as one non-spam mail.
+@end defun
+
+Usually you would call @code{spam-stat-process-spam-directory} on a
+directory such as @file{~/Mail/mail/spam} (this usually corresponds
+the the group @samp{nnml:mail.spam}), and you would call
+@code{spam-stat-process-non-spam-directory} on a directory such as
+@file{~/Mail/mail/misc} (this usually corresponds the the group
+@samp{nnml:mail.misc}).
+
+When you are using @acronym{IMAP}, you won't have the mails available
+locally, so that will not work. One solution is to use the Gnus Agent
+to cache the articles. Then you can use directories such as
+@file{"~/News/agent/nnimap/mail.yourisp.com/personal_spam"} for
+@code{spam-stat-process-spam-directory}. @xref{Agent as Cache}.
+
+@defvar spam-stat
+This variable holds the hash-table with all the statistics---the
+dictionary we have been talking about. For every word in either
+collection, this hash-table stores a vector describing how often the
+word appeared in spam and often it appeared in non-spam mails.
+@end defvar
+
+If you want to regenerate the statistics from scratch, you need to
+reset the dictionary.
+
+@defun spam-stat-reset
+Reset the @code{spam-stat} hash-table, deleting all the statistics.
+@end defun
+
+When you are done, you must save the dictionary. The dictionary may
+be rather large. If you will not update the dictionary incrementally
+(instead, you will recreate it once a month, for example), then you
+can reduce the size of the dictionary by deleting all words that did
+not appear often enough or that do not clearly belong to only spam or
+only non-spam mails.
+
+@defun spam-stat-reduce-size
+Reduce the size of the dictionary. Use this only if you do not want
+to update the dictionary incrementally.
+@end defun
+
+@defun spam-stat-save
+Save the dictionary.
+@end defun
+
+@defvar spam-stat-file
+The filename used to store the dictionary. This defaults to
+@file{~/.spam-stat.el}.
+@end defvar
+
+@node Splitting mail using spam-stat
+@subsubsection Splitting mail using spam-stat
+
+In order to use @code{spam-stat} to split your mail, you need to add the
+following to your @file{~/.gnus.el} file:
-@item
-Hallvard B Furuseth---various bits and pieces, especially dealing with
-.newsrc files.
+@lisp
+(require 'spam-stat)
+(spam-stat-load)
+@end lisp
-@item
-Brian Edmonds---@file{gnus-bbdb.el}.
+This will load the necessary Gnus code, and the dictionary you
+created.
-@item
-David Moore---rewrite of @file{nnvirtual.el} and many other things.
+Next, you need to adapt your fancy splitting rules: You need to
+determine how to use @code{spam-stat}. The following examples are for
+the nnml back end. Using the nnimap back end works just as well. Just
+use @code{nnimap-split-fancy} instead of @code{nnmail-split-fancy}.
-@item
-Kevin Davidson---came up with the name @dfn{ding}, so blame him.
+In the simplest case, you only have two groups, @samp{mail.misc} and
+@samp{mail.spam}. The following expression says that mail is either
+spam or it should go into @samp{mail.misc}. If it is spam, then
+@code{spam-stat-split-fancy} will return @samp{mail.spam}.
-@item
-François Pinard---many, many interesting and thorough bug reports, as
-well as autoconf support.
+@lisp
+(setq nnmail-split-fancy
+ `(| (: spam-stat-split-fancy)
+ "mail.misc"))
+@end lisp
-@end itemize
+@defvar spam-stat-split-fancy-spam-group
+The group to use for spam. Default is @samp{mail.spam}.
+@end defvar
-This manual was proof-read by Adrian Aichner, with Ricardo Nassif, Mark
-Borges, and Jost Krieger proof-reading parts of the manual.
+If you also filter mail with specific subjects into other groups, use
+the following expression. Only mails not matching the regular
+expression are considered potential spam.
-The following people have contributed many patches and suggestions:
+@lisp
+(setq nnmail-split-fancy
+ `(| ("Subject" "\\bspam-stat\\b" "mail.emacs")
+ (: spam-stat-split-fancy)
+ "mail.misc"))
+@end lisp
-Christopher Davis,
-Andrew Eskilsson,
-Kai Grossjohann,
-David KÃ¥gedal,
-Richard Pieri,
-Fabrice Popineau,
-Daniel Quinlan,
-Jason L. Tibbitts, III,
-and
-Jack Vinson.
+If you want to filter for spam first, then you must be careful when
+creating the dictionary. Note that @code{spam-stat-split-fancy} must
+consider both mails in @samp{mail.emacs} and in @samp{mail.misc} as
+non-spam, therefore both should be in your collection of non-spam
+mails, when creating the dictionary!
-Also thanks to the following for patches and stuff:
+@lisp
+(setq nnmail-split-fancy
+ `(| (: spam-stat-split-fancy)
+ ("Subject" "\\bspam-stat\\b" "mail.emacs")
+ "mail.misc"))
+@end lisp
-Jari Aalto,
-Adrian Aichner,
-Vladimir Alexiev,
-Russ Allbery,
-Peter Arius,
-Matt Armstrong,
-Marc Auslander,
-Miles Bader,
-Frank Bennett,
-Robert Bihlmeyer,
-Chris Bone,
-Mark Borges,
-Mark Boyns,
-Lance A. Brown,
-Kees de Bruin,
-Martin Buchholz,
-Joe Buehler,
-Kevin Buhr,
-Alastair Burt,
-Joao Cachopo,
-Zlatko Calusic,
-Massimo Campostrini,
-Castor,
-David Charlap,
-Dan Christensen,
-Kevin Christian,
-Michael R. Cook,
-Glenn Coombs,
-Frank D. Cringle,
-Geoffrey T. Dairiki,
-Andre Deparade,
-Ulrik Dickow,
-Dave Disser,
-Rui-Tao Dong, @c ?
-Joev Dubach,
-Michael Welsh Duggan,
-Dave Edmondson,
-Paul Eggert,
-Karl Eichwalder,
-Enami Tsugutomo, @c Enami
-Michael Ernst,
-Luc Van Eycken,
-Sam Falkner,
-Nelson Jose dos Santos Ferreira,
-Sigbjorn Finne,
-Paul Fisher,
-Decklin Foster,
-Gary D. Foster,
-Paul Franklin,
-Guy Geens,
-Arne Georg Gleditsch,
-David S. Goldberg,
-Michelangelo Grigni,
-Dale Hagglund,
-D. Hall,
-Magnus Hammerin,
-Kenichi Handa, @c Handa
-Raja R. Harinath,
-Yoshiki Hayashi, @c ?
-P. E. Jareth Hein,
-Hisashige Kenji, @c Hisashige
-Marc Horowitz,
-Gunnar Horrigmo,
-Richard Hoskins,
-Brad Howes,
-François Felix Ingrand,
-Ishikawa Ichiro, @c Ishikawa
-Lee Iverson,
-Iwamuro Motonori, @c Iwamuro
-Rajappa Iyer,
-Andreas Jaeger,
-Randell Jesup,
-Fred Johansen,
-Gareth Jones,
-Simon Josefsson,
-Greg Klanderman,
-Karl Kleinpaste,
-Peter Skov Knudsen,
-Shuhei Kobayashi, @c Kobayashi
-Koseki Yoshinori, @c Koseki
-Thor Kristoffersen,
-Jens Lautenbacher,
-Martin Larose,
-Seokchan Lee, @c Lee
-Joerg Lenneis,
-Carsten Leonhardt,
-James LewisMoss,
-Christian Limpach,
-Markus Linnala,
-Dave Love,
-Mike McEwan,
-Tonny Madsen,
-Shlomo Mahlab,
-Nat Makarevitch,
-Istvan Marko,
-David Martin,
-Jason R. Mastaler,
-Gordon Matzigkeit,
-Timo Metzemakers,
-Richard Mlynarik,
-Lantz Moore,
-Morioka Tomohiko, @c Morioka
-Erik Toubro Nielsen,
-Hrvoje Niksic,
-Andy Norman,
-Fred Oberhauser,
-C. R. Oldham,
-Alexandre Oliva,
-Ken Olstad,
-Masaharu Onishi, @c Onishi
-Hideki Ono, @c Ono
-William Perry,
-Stephen Peters,
-Jens-Ulrik Holger Petersen,
-Ulrich Pfeifer,
-Matt Pharr,
-Andy Piper,
-John McClary Prevost,
-Bill Pringlemeir,
-Mike Pullen,
-Jim Radford,
-Colin Rafferty,
-Lasse Rasinen,
-Lars Balker Rasmussen,
-Joe Reiss,
-Renaud Rioboo,
-Roland B. Roberts,
-Bart Robinson,
-Christian von Roques,
-Markus Rost,
-Jason Rumney,
-Wolfgang Rupprecht,
-Jay Sachs,
-Dewey M. Sasser,
-Conrad Sauerwald,
-Loren Schall,
-Dan Schmidt,
-Ralph Schleicher,
-Philippe Schnoebelen,
-Andreas Schwab,
-Randal L. Schwartz,
-Justin Sheehy,
-Danny Siu,
-Matt Simmons,
-Paul D. Smith,
-Jeff Sparkes,
-Toby Speight,
-Michael Sperber,
-Darren Stalder,
-Richard Stallman,
-Greg Stark,
-Sam Steingold,
-Jonas Steverud,
-Paul Stodghill,
-Kurt Swanson,
-Samuel Tardieu,
-Teddy,
-Chuck Thompson,
-Philippe Troin,
-James Troup,
-Trung Tran-Duc,
-Aaron M. Ucko,
-Aki Vehtari,
-Didier Verna,
-Jan Vroonhof,
-Stefan Waldherr,
-Pete Ware,
-Barry A. Warsaw,
-Christoph Wedler,
-Joe Wells,
-Lee Willis,
-Katsumi Yamaoka @c Yamaoka
-and
-Lloyd Zusman.
+You can combine this with traditional filtering. Here, we move all
+HTML-only mails into the @samp{mail.spam.filtered} group. Note that since
+@code{spam-stat-split-fancy} will never see them, the mails in
+@samp{mail.spam.filtered} should be neither in your collection of spam mails,
+nor in your collection of non-spam mails, when creating the
+dictionary!
+@lisp
+(setq nnmail-split-fancy
+ `(| ("Content-Type" "text/html" "mail.spam.filtered")
+ (: spam-stat-split-fancy)
+ ("Subject" "\\bspam-stat\\b" "mail.emacs")
+ "mail.misc"))
+@end lisp
-For a full overview of what each person has done, the ChangeLogs
-included in the Gnus alpha distributions should give ample reading
-(550kB and counting).
-Apologies to everybody that I've forgotten, of which there are many, I'm
-sure.
+@node Low-level interface to the spam-stat dictionary
+@subsubsection Low-level interface to the spam-stat dictionary
-Gee, that's quite a list of people. I guess that must mean that there
-actually are people who are using Gnus. Who'd'a thunk it!
+The main interface to using @code{spam-stat}, are the following functions:
+@defun spam-stat-buffer-is-spam
+Called in a buffer, that buffer is considered to be a new spam mail.
+Use this for new mail that has not been processed before.
+@end defun
-@node New Features
-@subsection New Features
-@cindex new features
+@defun spam-stat-buffer-is-no-spam
+Called in a buffer, that buffer is considered to be a new non-spam
+mail. Use this for new mail that has not been processed before.
+@end defun
-@menu
-* ding Gnus:: New things in Gnus 5.0/5.1, the first new Gnus.
-* September Gnus:: The Thing Formally Known As Gnus 5.3/5.3.
-* Red Gnus:: Third time best---Gnus 5.4/5.5.
-* Quassia Gnus:: Two times two is four, or Gnus 5.6/5.7.
-@end menu
+@defun spam-stat-buffer-change-to-spam
+Called in a buffer, that buffer is no longer considered to be normal
+mail but spam. Use this to change the status of a mail that has
+already been processed as non-spam.
+@end defun
-These lists are, of course, just @emph{short} overviews of the
-@emph{most} important new features. No, really. There are tons more.
-Yes, we have feeping creaturism in full effect.
+@defun spam-stat-buffer-change-to-non-spam
+Called in a buffer, that buffer is no longer considered to be spam but
+normal mail. Use this to change the status of a mail that has already
+been processed as spam.
+@end defun
+@defun spam-stat-save
+Save the hash table to the file. The filename used is stored in the
+variable @code{spam-stat-file}.
+@end defun
-@node ding Gnus
-@subsubsection (ding) Gnus
+@defun spam-stat-load
+Load the hash table from a file. The filename used is stored in the
+variable @code{spam-stat-file}.
+@end defun
-New features in Gnus 5.0/5.1:
+@defun spam-stat-score-word
+Return the spam score for a word.
+@end defun
-@itemize @bullet
+@defun spam-stat-score-buffer
+Return the spam score for a buffer.
+@end defun
-@item
-The look of all buffers can be changed by setting format-like variables
-(@pxref{Group Buffer Format} and @pxref{Summary Buffer Format}).
+@defun spam-stat-split-fancy
+Use this function for fancy mail splitting. Add the rule @samp{(:
+spam-stat-split-fancy)} to @code{nnmail-split-fancy}
+@end defun
-@item
-Local spool and several @sc{nntp} servers can be used at once
-(@pxref{Select Methods}).
+Make sure you load the dictionary before using it. This requires the
+following in your @file{~/.gnus.el} file:
-@item
-You can combine groups into virtual groups (@pxref{Virtual Groups}).
+@lisp
+(require 'spam-stat)
+(spam-stat-load)
+@end lisp
-@item
-You can read a number of different mail formats (@pxref{Getting Mail}).
-All the mail backends implement a convenient mail expiry scheme
-(@pxref{Expiring Mail}).
+Typical test will involve calls to the following functions:
+
+@smallexample
+Reset: (setq spam-stat (make-hash-table :test 'equal))
+Learn spam: (spam-stat-process-spam-directory "~/Mail/mail/spam")
+Learn non-spam: (spam-stat-process-non-spam-directory "~/Mail/mail/misc")
+Save table: (spam-stat-save)
+File size: (nth 7 (file-attributes spam-stat-file))
+Number of words: (hash-table-count spam-stat)
+Test spam: (spam-stat-test-directory "~/Mail/mail/spam")
+Test non-spam: (spam-stat-test-directory "~/Mail/mail/misc")
+Reduce table size: (spam-stat-reduce-size)
+Save table: (spam-stat-save)
+File size: (nth 7 (file-attributes spam-stat-file))
+Number of words: (hash-table-count spam-stat)
+Test spam: (spam-stat-test-directory "~/Mail/mail/spam")
+Test non-spam: (spam-stat-test-directory "~/Mail/mail/misc")
+@end smallexample
+
+Here is how you would create your dictionary:
+
+@smallexample
+Reset: (setq spam-stat (make-hash-table :test 'equal))
+Learn spam: (spam-stat-process-spam-directory "~/Mail/mail/spam")
+Learn non-spam: (spam-stat-process-non-spam-directory "~/Mail/mail/misc")
+Repeat for any other non-spam group you need...
+Reduce table size: (spam-stat-reduce-size)
+Save table: (spam-stat-save)
+@end smallexample
+
+@node Other modes
+@section Interaction with other modes
+
+@subsection Dired
+@cindex dired
+
+@code{gnus-dired-minor-mode} provided some useful functions for dired
+buffers. It is enabled with
+@lisp
+(add-hook 'dired-mode-hook 'turn-on-gnus-dired-mode)
+@end lisp
-@item
-Gnus can use various strategies for gathering threads that have lost
-their roots (thereby gathering loose sub-threads into one thread) or it
-can go back and retrieve enough headers to build a complete thread
-(@pxref{Customizing Threading}).
+@table @kbd
+@item C-c C-m C-a
+@findex gnus-dired-attach
+Send dired's marked files as an attachment (@code{gnus-dired-attach}).
+You will be prompted for a message buffer.
+
+@item C-c C-m C-l
+@findex gnus-dired-find-file-mailcap
+Visit a file according to the appropriate mailcap entry
+(@code{gnus-dired-find-file-mailcap}). With prefix, open file in a new
+buffer.
-@item
-Killed groups can be displayed in the group buffer, and you can read
-them as well (@pxref{Listing Groups}).
+@item C-c C-m C-p
+@findex gnus-dired-print
+Print file according to the mailcap entry (@code{gnus-dired-print}). If
+there is no print command, print in a PostScript image.
+@end table
+
+@node Various Various
+@section Various Various
+@cindex mode lines
+@cindex highlights
-@item
-Gnus can do partial group updates---you do not have to retrieve the
-entire active file just to check for new articles in a few groups
-(@pxref{The Active File}).
+@table @code
-@item
-Gnus implements a sliding scale of subscribedness to groups
-(@pxref{Group Levels}).
+@item gnus-home-directory
+@vindex gnus-home-directory
+All Gnus file and directory variables will be initialized from this
+variable, which defaults to @file{~/}.
-@item
-You can score articles according to any number of criteria
-(@pxref{Scoring}). You can even get Gnus to find out how to score
-articles for you (@pxref{Adaptive Scoring}).
+@item gnus-directory
+@vindex gnus-directory
+Most Gnus storage file and directory variables will be initialized from
+this variable, which defaults to the @env{SAVEDIR} environment
+variable, or @file{~/News/} if that variable isn't set.
-@item
-Gnus maintains a dribble buffer that is auto-saved the normal Emacs
-manner, so it should be difficult to lose much data on what you have
-read if your machine should go down (@pxref{Auto Save}).
+Note that gnus is mostly loaded when the @file{.gnus.el} file is read.
+This means that other directory variables that are initialized from this
+variable won't be set properly if you set this variable in
+@file{.gnus.el}. Set this variable in @file{.emacs} instead.
-@item
-Gnus now has its own startup file (@file{.gnus}) to avoid cluttering up
-the @file{.emacs} file.
+@item gnus-default-directory
+@vindex gnus-default-directory
+Not related to the above variable at all---this variable says what the
+default directory of all Gnus buffers should be. If you issue commands
+like @kbd{C-x C-f}, the prompt you'll get starts in the current buffer's
+default directory. If this variable is @code{nil} (which is the
+default), the default directory will be the default directory of the
+buffer you were in when you started Gnus.
-@item
-You can set the process mark on both groups and articles and perform
-operations on all the marked items (@pxref{Process/Prefix}).
+@item gnus-verbose
+@vindex gnus-verbose
+This variable is an integer between zero and ten. The higher the value,
+the more messages will be displayed. If this variable is zero, Gnus
+will never flash any messages, if it is seven (which is the default),
+most important messages will be shown, and if it is ten, Gnus won't ever
+shut up, but will flash so many messages it will make your head swim.
-@item
-You can grep through a subset of groups and create a group from the
-results (@pxref{Kibozed Groups}).
+@item gnus-verbose-backends
+@vindex gnus-verbose-backends
+This variable works the same way as @code{gnus-verbose}, but it applies
+to the Gnus back ends instead of Gnus proper.
-@item
-You can list subsets of groups according to, well, anything
-(@pxref{Listing Groups}).
+@item nnheader-max-head-length
+@vindex nnheader-max-head-length
+When the back ends read straight heads of articles, they all try to read
+as little as possible. This variable (default 4096) specifies
+the absolute max length the back ends will try to read before giving up
+on finding a separator line between the head and the body. If this
+variable is @code{nil}, there is no upper read bound. If it is
+@code{t}, the back ends won't try to read the articles piece by piece,
+but read the entire articles. This makes sense with some versions of
+@code{ange-ftp} or @code{efs}.
-@item
-You can browse foreign servers and subscribe to groups from those
-servers (@pxref{Browse Foreign Server}).
+@item nnheader-head-chop-length
+@vindex nnheader-head-chop-length
+This variable (default 2048) says how big a piece of each article to
+read when doing the operation described above.
-@item
-Gnus can fetch articles, asynchronously, on a second connection to the
-server (@pxref{Asynchronous Fetching}).
+@item nnheader-file-name-translation-alist
+@vindex nnheader-file-name-translation-alist
+@cindex file names
+@cindex invalid characters in file names
+@cindex characters in file names
+This is an alist that says how to translate characters in file names.
+For instance, if @samp{:} is invalid as a file character in file names
+on your system (you OS/2 user you), you could say something like:
-@item
-You can cache articles locally (@pxref{Article Caching}).
+@lisp
+@group
+(setq nnheader-file-name-translation-alist
+ '((?: . ?_)))
+@end group
+@end lisp
-@item
-The uudecode functions have been expanded and generalized
-(@pxref{Decoding Articles}).
+In fact, this is the default value for this variable on OS/2 and MS
+Windows (phooey) systems.
-@item
-You can still post uuencoded articles, which was a little-known feature
-of @sc{gnus}' past (@pxref{Uuencoding and Posting}).
+@item gnus-hidden-properties
+@vindex gnus-hidden-properties
+This is a list of properties to use to hide ``invisible'' text. It is
+@code{(invisible t intangible t)} by default on most systems, which
+makes invisible text invisible and intangible.
-@item
-Fetching parents (and other articles) now actually works without
-glitches (@pxref{Finding the Parent}).
+@item gnus-parse-headers-hook
+@vindex gnus-parse-headers-hook
+A hook called before parsing headers. It can be used, for instance, to
+gather statistics on the headers fetched, or perhaps you'd like to prune
+some headers. I don't see why you'd want that, though.
-@item
-Gnus can fetch FAQs and group descriptions (@pxref{Group Information}).
+@item gnus-shell-command-separator
+@vindex gnus-shell-command-separator
+String used to separate two shell commands. The default is @samp{;}.
-@item
-Digests (and other files) can be used as the basis for groups
-(@pxref{Document Groups}).
+@item gnus-invalid-group-regexp
+@vindex gnus-invalid-group-regexp
-@item
-Articles can be highlighted and customized (@pxref{Customizing
-Articles}).
+Regexp to match ``invalid'' group names when querying user for a group
+name. The default value catches some @strong{really} invalid group
+names who could possibly mess up Gnus internally (like allowing
+@samp{:} in a group name, which is normally used to delimit method and
+group).
-@item
-URLs and other external references can be buttonized (@pxref{Article
-Buttons}).
+@acronym{IMAP} users might want to allow @samp{/} in group names though.
-@item
-You can do lots of strange stuff with the Gnus window & frame
-configuration (@pxref{Windows Configuration}).
-@item
-You can click on buttons instead of using the keyboard
-(@pxref{Buttons}).
+@end table
-@end itemize
+@node The End
+@chapter The End
+Well, that's the manual---you can get on with your life now. Keep in
+touch. Say hello to your cats from me.
-@node September Gnus
-@subsubsection September Gnus
+My @strong{ghod}---I just can't stand goodbyes. Sniffle.
-@iftex
-@iflatex
-\gnusfig{-28cm}{0cm}{\epsfig{figure=tmp/september.ps,height=20cm}}
-@end iflatex
-@end iftex
+Ol' Charles Reznikoff said it pretty well, so I leave the floor to him:
-New features in Gnus 5.2/5.3:
+@quotation
+@strong{Te Deum}
-@itemize @bullet
+@sp 1
+Not because of victories @*
+I sing,@*
+having none,@*
+but for the common sunshine,@*
+the breeze,@*
+the largess of the spring.
-@item
-A new message composition mode is used. All old customization variables
-for @code{mail-mode}, @code{rnews-reply-mode} and @code{gnus-msg} are
-now obsolete.
+@sp 1
+Not for victory@*
+but for the day's work done@*
+as well as I was able;@*
+not for a seat upon the dais@*
+but at the common table.@*
+@end quotation
-@item
-Gnus is now able to generate @dfn{sparse} threads---threads where
-missing articles are represented by empty nodes (@pxref{Customizing
-Threading}).
-@lisp
-(setq gnus-build-sparse-threads 'some)
-@end lisp
+@node Appendices
+@chapter Appendices
-@item
-Outgoing articles are stored on a special archive server
-(@pxref{Archived Messages}).
+@menu
+* XEmacs:: Requirements for installing under XEmacs.
+* History:: How Gnus got where it is today.
+* On Writing Manuals:: Why this is not a beginner's guide.
+* Terminology:: We use really difficult, like, words here.
+* Customization:: Tailoring Gnus to your needs.
+* Troubleshooting:: What you might try if things do not work.
+* Gnus Reference Guide:: Rilly, rilly technical stuff.
+* Emacs for Heathens:: A short introduction to Emacsian terms.
+* Frequently Asked Questions:: The Gnus FAQ
+@end menu
-@item
-Partial thread regeneration now happens when articles are
-referred.
-@item
-Gnus can make use of GroupLens predictions (@pxref{GroupLens}).
+@node XEmacs
+@section XEmacs
+@cindex XEmacs
+@cindex installing under XEmacs
-@item
-Picons (personal icons) can be displayed under XEmacs (@pxref{Picons}).
+XEmacs is distributed as a collection of packages. You should install
+whatever packages the Gnus XEmacs package requires. The current
+requirements are @samp{gnus}, @samp{mail-lib}, @samp{xemacs-base},
+@samp{eterm}, @samp{sh-script}, @samp{net-utils}, @samp{os-utils},
+@samp{dired}, @samp{mh-e}, @samp{sieve}, @samp{ps-print}, @samp{w3},
+@samp{pgg}, @samp{mailcrypt}, @samp{ecrypto}, and @samp{sasl}.
-@item
-A @code{trn}-like tree buffer can be displayed (@pxref{Tree Display}).
-@lisp
-(setq gnus-use-trees t)
-@end lisp
+@node History
+@section History
-@item
-An @code{nn}-like pick-and-read minor mode is available for the summary
-buffers (@pxref{Pick and Read}).
+@cindex history
+@sc{gnus} was written by Masanobu @sc{Umeda}. When autumn crept up in
+'94, Lars Magne Ingebrigtsen grew bored and decided to rewrite Gnus.
-@lisp
-(add-hook 'gnus-summary-mode-hook 'gnus-pick-mode)
-@end lisp
+If you want to investigate the person responsible for this outrage,
+you can point your (feh!) web browser to
+@uref{http://quimby.gnus.org/}. This is also the primary
+distribution point for the new and spiffy versions of Gnus, and is
+known as The Site That Destroys Newsrcs And Drives People Mad.
-@item
-In binary groups you can use a special binary minor mode (@pxref{Binary
-Groups}).
+During the first extended alpha period of development, the new Gnus was
+called ``(ding) Gnus''. @dfn{(ding)} is, of course, short for
+@dfn{ding is not Gnus}, which is a total and utter lie, but who cares?
+(Besides, the ``Gnus'' in this abbreviation should probably be
+pronounced ``news'' as @sc{Umeda} intended, which makes it a more
+appropriate name, don't you think?)
-@item
-Groups can be grouped in a folding topic hierarchy (@pxref{Group
-Topics}).
+In any case, after spending all that energy on coming up with a new and
+spunky name, we decided that the name was @emph{too} spunky, so we
+renamed it back again to ``Gnus''. But in mixed case. ``Gnus'' vs.
+``@sc{gnus}''. New vs. old.
-@lisp
-(add-hook 'gnus-group-mode-hook 'gnus-topic-mode)
-@end lisp
+@menu
+* Gnus Versions:: What Gnus versions have been released.
+* Other Gnus Versions:: Other Gnus versions that also have been released.
+* Why?:: What's the point of Gnus?
+* Compatibility:: Just how compatible is Gnus with @sc{gnus}?
+* Conformity:: Gnus tries to conform to all standards.
+* Emacsen:: Gnus can be run on a few modern Emacsen.
+* Gnus Development:: How Gnus is developed.
+* Contributors:: Oodles of people.
+* New Features:: Pointers to some of the new stuff in Gnus.
+@end menu
-@item
-Gnus can re-send and bounce mail (@pxref{Summary Mail Commands}).
-@item
-Groups can now have a score, and bubbling based on entry frequency
-is possible (@pxref{Group Score}).
+@node Gnus Versions
+@subsection Gnus Versions
+@cindex ding Gnus
+@cindex September Gnus
+@cindex Red Gnus
+@cindex Quassia Gnus
+@cindex Pterodactyl Gnus
+@cindex Oort Gnus
+@cindex No Gnus
+@cindex Gnus versions
-@lisp
-(add-hook 'gnus-summary-exit-hook 'gnus-summary-bubble-group)
-@end lisp
+The first ``proper'' release of Gnus 5 was done in November 1995 when it
+was included in the Emacs 19.30 distribution (132 (ding) Gnus releases
+plus 15 Gnus 5.0 releases).
-@item
-Groups can be process-marked, and commands can be performed on
-groups of groups (@pxref{Marking Groups}).
+In May 1996 the next Gnus generation (aka. ``September Gnus'' (after 99
+releases)) was released under the name ``Gnus 5.2'' (40 releases).
-@item
-Caching is possible in virtual groups.
+On July 28th 1996 work on Red Gnus was begun, and it was released on
+January 25th 1997 (after 84 releases) as ``Gnus 5.4'' (67 releases).
-@item
-@code{nndoc} now understands all kinds of digests, mail boxes, rnews
-news batches, ClariNet briefs collections, and just about everything
-else (@pxref{Document Groups}).
+On September 13th 1997, Quassia Gnus was started and lasted 37 releases.
+If was released as ``Gnus 5.6'' on March 8th 1998 (46 releases).
-@item
-Gnus has a new backend (@code{nnsoup}) to create/read SOUP packets
-(@pxref{SOUP}).
+Gnus 5.6 begat Pterodactyl Gnus on August 29th 1998 and was released as
+``Gnus 5.8'' (after 99 releases and a CVS repository) on December 3rd
+1999.
-@item
-The Gnus cache is much faster.
+On the 26th of October 2000, Oort Gnus was begun.
-@item
-Groups can be sorted according to many criteria (@pxref{Sorting
-Groups}).
+If you happen upon a version of Gnus that has a prefixed name --
+``(ding) Gnus'', ``September Gnus'', ``Red Gnus'', ``Quassia Gnus'',
+``Pterodactyl Gnus'', ``Oort Gnus'' -- don't panic. Don't let it know
+that you're frightened. Back away. Slowly. Whatever you do, don't
+run. Walk away, calmly, until you're out of its reach. Find a proper
+released version of Gnus and snuggle up to that instead.
-@item
-New group parameters have been introduced to set list-addresses and
-expiry times (@pxref{Group Parameters}).
-@item
-All formatting specs allow specifying faces to be used
-(@pxref{Formatting Fonts}).
+@node Other Gnus Versions
+@subsection Other Gnus Versions
+@cindex Semi-gnus
-@item
-There are several more commands for setting/removing/acting on process
-marked articles on the @kbd{M P} submap (@pxref{Setting Process Marks}).
+In addition to the versions of Gnus which have had their releases
+coordinated by Lars, one major development has been Semi-gnus from
+Japan. It's based on a library called @acronym{SEMI}, which provides
+@acronym{MIME} capabilities.
-@item
-The summary buffer can be limited to show parts of the available
-articles based on a wide range of criteria. These commands have been
-bound to keys on the @kbd{/} submap (@pxref{Limiting}).
+These Gnusae are based mainly on Gnus 5.6 and Pterodactyl Gnus.
+Collectively, they are called ``Semi-gnus'', and different strains are
+called T-gnus, ET-gnus, Nana-gnus and Chaos. These provide powerful
+@acronym{MIME} and multilingualization things, especially important for
+Japanese users.
-@item
-Articles can be made persistent with the @kbd{*} command
-(@pxref{Persistent Articles}).
-@item
-All functions for hiding article elements are now toggles.
+@node Why?
+@subsection Why?
-@item
-Article headers can be buttonized (@pxref{Article Washing}).
+What's the point of Gnus?
-@item
-All mail backends support fetching articles by @code{Message-ID}.
+I want to provide a ``rad'', ``happening'', ``way cool'' and ``hep''
+newsreader, that lets you do anything you can think of. That was my
+original motivation, but while working on Gnus, it has become clear to
+me that this generation of newsreaders really belong in the stone age.
+Newsreaders haven't developed much since the infancy of the net. If the
+volume continues to rise with the current rate of increase, all current
+newsreaders will be pretty much useless. How do you deal with
+newsgroups that have thousands of new articles each day? How do you
+keep track of millions of people who post?
-@item
-Duplicate mail can now be treated properly (@pxref{Duplicates}).
+Gnus offers no real solutions to these questions, but I would very much
+like to see Gnus being used as a testing ground for new methods of
+reading and fetching news. Expanding on @sc{Umeda}-san's wise decision
+to separate the newsreader from the back ends, Gnus now offers a simple
+interface for anybody who wants to write new back ends for fetching mail
+and news from different sources. I have added hooks for customizations
+everywhere I could imagine it being useful. By doing so, I'm inviting
+every one of you to explore and invent.
-@item
-All summary mode commands are available directly from the article
-buffer (@pxref{Article Keymap}).
+May Gnus never be complete. @kbd{C-u 100 M-x all-hail-emacs} and
+@kbd{C-u 100 M-x all-hail-xemacs}.
-@item
-Frames can be part of @code{gnus-buffer-configuration} (@pxref{Windows
-Configuration}).
-@item
-Mail can be re-scanned by a daemonic process (@pxref{Daemons}).
-@iftex
-@iflatex
-\marginpar[\mbox{}\hfill\epsfig{figure=tmp/fseptember.ps,height=5cm}]{\epsfig{figure=tmp/fseptember.ps,height=5cm}}
-@end iflatex
-@end iftex
+@node Compatibility
+@subsection Compatibility
-@item
-Gnus can make use of NoCeM files to weed out spam (@pxref{NoCeM}).
+@cindex compatibility
+Gnus was designed to be fully compatible with @sc{gnus}. Almost all key
+bindings have been kept. More key bindings have been added, of course,
+but only in one or two obscure cases have old bindings been changed.
-@lisp
-(setq gnus-use-nocem t)
-@end lisp
+Our motto is:
+@quotation
+@cartouche
+@center In a cloud bones of steel.
+@end cartouche
+@end quotation
-@item
-Groups can be made permanently visible (@pxref{Listing Groups}).
+All commands have kept their names. Some internal functions have changed
+their names.
-@lisp
-(setq gnus-permanently-visible-groups "^nnml:")
-@end lisp
+The @code{gnus-uu} package has changed drastically. @xref{Decoding
+Articles}.
-@item
-Many new hooks have been introduced to make customizing easier.
+One major compatibility question is the presence of several summary
+buffers. All variables relevant while reading a group are
+buffer-local to the summary buffer they belong in. Although many
+important variables have their values copied into their global
+counterparts whenever a command is executed in the summary buffer, this
+change might lead to incorrect values being used unless you are careful.
-@item
-Gnus respects the @code{Mail-Copies-To} header.
+All code that relies on knowledge of @sc{gnus} internals will probably
+fail. To take two examples: Sorting @code{gnus-newsrc-alist} (or
+changing it in any way, as a matter of fact) is strictly verboten. Gnus
+maintains a hash table that points to the entries in this alist (which
+speeds up many functions), and changing the alist directly will lead to
+peculiar results.
-@item
-Threads can be gathered by looking at the @code{References} header
-(@pxref{Customizing Threading}).
+@cindex hilit19
+@cindex highlighting
+Old hilit19 code does not work at all. In fact, you should probably
+remove all hilit code from all Gnus hooks
+(@code{gnus-group-prepare-hook} and @code{gnus-summary-prepare-hook}).
+Gnus provides various integrated functions for highlighting. These are
+faster and more accurate. To make life easier for everybody, Gnus will
+by default remove all hilit calls from all hilit hooks. Uncleanliness!
+Away!
-@lisp
-(setq gnus-summary-thread-gathering-function
- 'gnus-gather-threads-by-references)
-@end lisp
+Packages like @code{expire-kill} will no longer work. As a matter of
+fact, you should probably remove all old @sc{gnus} packages (and other
+code) when you start using Gnus. More likely than not, Gnus already
+does what you have written code to make @sc{gnus} do. (Snicker.)
-@item
-Read articles can be stored in a special backlog buffer to avoid
-refetching (@pxref{Article Backlog}).
+Even though old methods of doing things are still supported, only the
+new methods are documented in this manual. If you detect a new method of
+doing something while reading this manual, that does not mean you have
+to stop doing it the old way.
-@lisp
-(setq gnus-keep-backlog 50)
-@end lisp
+Gnus understands all @sc{gnus} startup files.
-@item
-A clean copy of the current article is always stored in a separate
-buffer to allow easier treatment.
+@kindex M-x gnus-bug
+@findex gnus-bug
+@cindex reporting bugs
+@cindex bugs
+Overall, a casual user who hasn't written much code that depends on
+@sc{gnus} internals should suffer no problems. If problems occur,
+please let me know by issuing that magic command @kbd{M-x gnus-bug}.
-@item
-Gnus can suggest where to save articles (@pxref{Saving Articles}).
+@vindex gnus-bug-create-help-buffer
+If you are in the habit of sending bug reports @emph{very} often, you
+may find the helpful help buffer annoying after a while. If so, set
+@code{gnus-bug-create-help-buffer} to @code{nil} to avoid having it pop
+up at you.
-@item
-Gnus doesn't have to do as much prompting when saving (@pxref{Saving
-Articles}).
-@lisp
-(setq gnus-prompt-before-saving t)
-@end lisp
+@node Conformity
+@subsection Conformity
-@item
-@code{gnus-uu} can view decoded files asynchronously while fetching
-articles (@pxref{Other Decode Variables}).
+No rebels without a clue here, ma'am. We conform to all standards known
+to (wo)man. Except for those standards and/or conventions we disagree
+with, of course.
-@lisp
-(setq gnus-uu-grabbed-file-functions 'gnus-uu-grab-view)
-@end lisp
+@table @strong
-@item
-Filling in the article buffer now works properly on cited text
-(@pxref{Article Washing}).
+@item RFC (2)822
+@cindex RFC 822
+@cindex RFC 2822
+There are no known breaches of this standard.
-@item
-Hiding cited text adds buttons to toggle hiding, and how much
-cited text to hide is now customizable (@pxref{Article Hiding}).
+@item RFC 1036
+@cindex RFC 1036
+There are no known breaches of this standard, either.
-@lisp
-(setq gnus-cited-lines-visible 2)
-@end lisp
+@item Son-of-RFC 1036
+@cindex Son-of-RFC 1036
+We do have some breaches to this one.
-@item
-Boring headers can be hidden (@pxref{Article Hiding}).
+@table @emph
-@item
-Default scoring values can now be set from the menu bar.
+@item X-Newsreader
+@itemx User-Agent
+These are considered to be ``vanity headers'', while I consider them
+to be consumer information. After seeing so many badly formatted
+articles coming from @code{tin} and @code{Netscape} I know not to use
+either of those for posting articles. I would not have known that if
+it wasn't for the @code{X-Newsreader} header.
+@end table
-@item
-Further syntax checking of outgoing articles have been added.
+@item USEFOR
+@cindex USEFOR
+USEFOR is an IETF working group writing a successor to RFC 1036, based
+on Son-of-RFC 1036. They have produced a number of drafts proposing
+various changes to the format of news articles. The Gnus towers will
+look into implementing the changes when the draft is accepted as an RFC.
-@end itemize
+@item MIME - RFC 2045-2049 etc
+@cindex @acronym{MIME}
+All the various @acronym{MIME} RFCs are supported.
+
+@item Disposition Notifications - RFC 2298
+Message Mode is able to request notifications from the receiver.
+
+@item PGP - RFC 1991 and RFC 2440
+@cindex RFC 1991
+@cindex RFC 2440
+RFC 1991 is the original @acronym{PGP} message specification,
+published as an informational RFC. RFC 2440 was the follow-up, now
+called Open PGP, and put on the Standards Track. Both document a
+non-@acronym{MIME} aware @acronym{PGP} format. Gnus supports both
+encoding (signing and encryption) and decoding (verification and
+decryption).
+
+@item PGP/MIME - RFC 2015/3156
+RFC 2015 (superseded by 3156 which references RFC 2440 instead of RFC
+1991) describes the @acronym{MIME}-wrapping around the RF 1991/2440 format.
+Gnus supports both encoding and decoding.
+
+@item S/MIME - RFC 2633
+RFC 2633 describes the @acronym{S/MIME} format.
+
+@item IMAP - RFC 1730/2060, RFC 2195, RFC 2086, RFC 2359, RFC 2595, RFC 1731
+RFC 1730 is @acronym{IMAP} version 4, updated somewhat by RFC 2060
+(@acronym{IMAP} 4 revision 1). RFC 2195 describes CRAM-MD5
+authentication for @acronym{IMAP}. RFC 2086 describes access control
+lists (ACLs) for @acronym{IMAP}. RFC 2359 describes a @acronym{IMAP}
+protocol enhancement. RFC 2595 describes the proper @acronym{TLS}
+integration (STARTTLS) with @acronym{IMAP}. RFC 1731 describes the
+GSSAPI/Kerberos4 mechanisms for @acronym{IMAP}.
+@end table
-@node Red Gnus
-@subsubsection Red Gnus
+If you ever notice Gnus acting non-compliant with regards to the texts
+mentioned above, don't hesitate to drop a note to Gnus Towers and let us
+know.
-New features in Gnus 5.4/5.5:
-@iftex
-@iflatex
-\gnusfig{-5.5cm}{-4cm}{\epsfig{figure=tmp/red.ps,height=20cm}}
-@end iflatex
-@end iftex
+@node Emacsen
+@subsection Emacsen
+@cindex Emacsen
+@cindex XEmacs
+@cindex Mule
+@cindex Emacs
+
+Gnus should work on:
@itemize @bullet
@item
-@file{nntp.el} has been totally rewritten in an asynchronous fashion.
+Emacs 21.1 and up.
@item
-Article prefetching functionality has been moved up into
-Gnus (@pxref{Asynchronous Fetching}).
+XEmacs 21.4 and up.
-@item
-Scoring can now be performed with logical operators like @code{and},
-@code{or}, @code{not}, and parent redirection (@pxref{Advanced
-Scoring}).
+@end itemize
-@item
-Article washing status can be displayed in the
-article mode line (@pxref{Misc Article}).
+This Gnus version will absolutely not work on any Emacsen older than
+that. Not reliably, at least. Older versions of Gnus may work on older
+Emacs versions. However, T-gnus does support ``Mule 2.3 based on Emacs
+19.34'' and possibly the versions of XEmacs prior to 21.1.1, e.g. 20.4.
+See the file ``README'' in the T-gnus distribution for more details.
-@item
-@file{gnus.el} has been split into many smaller files.
+There are some vague differences between Gnus on the various
+platforms---XEmacs features more graphics (a logo and a toolbar)---but
+other than that, things should look pretty much the same under all
+Emacsen.
-@item
-Suppression of duplicate articles based on Message-ID can be done
-(@pxref{Duplicate Suppression}).
-@lisp
-(setq gnus-suppress-duplicates t)
-@end lisp
+@node Gnus Development
+@subsection Gnus Development
+
+Gnus is developed in a two-phased cycle. The first phase involves much
+discussion on the @samp{ding@@gnus.org} mailing list, where people
+propose changes and new features, post patches and new back ends. This
+phase is called the @dfn{alpha} phase, since the Gnusae released in this
+phase are @dfn{alpha releases}, or (perhaps more commonly in other
+circles) @dfn{snapshots}. During this phase, Gnus is assumed to be
+unstable and should not be used by casual users. Gnus alpha releases
+have names like ``Red Gnus'' and ``Quassia Gnus''.
+
+After futzing around for 50-100 alpha releases, Gnus is declared
+@dfn{frozen}, and only bug fixes are applied. Gnus loses the prefix,
+and is called things like ``Gnus 5.6.32'' instead. Normal people are
+supposed to be able to use these, and these are mostly discussed on the
+@samp{gnu.emacs.gnus} newsgroup.
+
+@cindex Incoming*
+@vindex mail-source-delete-incoming
+Some variable defaults differ between alpha Gnusae and released Gnusae.
+In particular, @code{mail-source-delete-incoming} defaults to @code{nil} in
+alpha Gnusae and @code{t} in released Gnusae. This is to prevent
+lossage of mail if an alpha release hiccups while handling the mail.
+
+The division of discussion between the ding mailing list and the Gnus
+newsgroup is not purely based on publicity concerns. It's true that
+having people write about the horrible things that an alpha Gnus release
+can do (sometimes) in a public forum may scare people off, but more
+importantly, talking about new experimental features that have been
+introduced may confuse casual users. New features are frequently
+introduced, fiddled with, and judged to be found wanting, and then
+either discarded or totally rewritten. People reading the mailing list
+usually keep up with these rapid changes, while people on the newsgroup
+can't be assumed to do so.
-@item
-New variables for specifying what score and adapt files are to be
-considered home score and adapt files (@pxref{Home Score File}) have
-been added.
-@item
-@code{nndoc} was rewritten to be easily extendable (@pxref{Document
-Server Internals}).
-@item
-Groups can inherit group parameters from parent topics (@pxref{Topic
-Parameters}).
+@node Contributors
+@subsection Contributors
+@cindex contributors
+
+The new Gnus version couldn't have been done without the help of all the
+people on the (ding) mailing list. Every day for over a year I have
+gotten billions of nice bug reports from them, filling me with joy,
+every single one of them. Smooches. The people on the list have been
+tried beyond endurance, what with my ``oh, that's a neat idea <type
+type>, yup, I'll release it right away <ship off> no wait, that doesn't
+work at all <type type>, yup, I'll ship that one off right away <ship
+off> no, wait, that absolutely does not work'' policy for releases.
+Micro$oft---bah. Amateurs. I'm @emph{much} worse. (Or is that
+``worser''? ``much worser''? ``worsest''?)
+
+I would like to take this opportunity to thank the Academy for@dots{} oops,
+wrong show.
+
+@itemize @bullet
@item
-Article editing has been revamped and is now actually usable.
+Masanobu @sc{Umeda}---the writer of the original @sc{gnus}.
@item
-Signatures can be recognized in more intelligent fashions
-(@pxref{Article Signature}).
+Shenghuo Zhu---uudecode.el, mm-uu.el, rfc1843.el, webmail.el,
+nnwarchive and many, many other things connected with @acronym{MIME} and
+other types of en/decoding, as well as general bug fixing, new
+functionality and stuff.
@item
-Summary pick mode has been made to look more @code{nn}-like. Line
-numbers are displayed and the @kbd{.} command can be used to pick
-articles (@code{Pick and Read}).
+Per Abrahamsen---custom, scoring, highlighting and @sc{soup} code (as
+well as numerous other things).
@item
-Commands for moving the @file{.newsrc.eld} from one server to
-another have been added (@pxref{Changing Servers}).
+Luis Fernandes---design and graphics.
@item
-There's a way now to specify that ``uninteresting'' fields be suppressed
-when generating lines in buffers (@pxref{Advanced Formatting}).
+Joe Reiss---creator of the smiley faces.
@item
-Several commands in the group buffer can be undone with @kbd{M-C-_}
-(@pxref{Undo}).
+Justin Sheehy---the @acronym{FAQ} maintainer.
@item
-Scoring can be done on words using the new score type @code{w}
-(@pxref{Score File Format}).
+Erik Naggum---help, ideas, support, code and stuff.
@item
-Adaptive scoring can be done on a Subject word-by-word basis
-(@pxref{Adaptive Scoring}).
-
-@lisp
-(setq gnus-use-adaptive-scoring '(word))
-@end lisp
+Wes Hardaker---@file{gnus-picon.el} and the manual section on
+@dfn{picons} (@pxref{Picons}).
@item
-Scores can be decayed (@pxref{Score Decays}).
-
-@lisp
-(setq gnus-decay-scores t)
-@end lisp
+Kim-Minh Kaplan---further work on the picon code.
@item
-Scoring can be performed using a regexp on the Date header. The Date is
-normalized to compact ISO 8601 format first (@pxref{Score File Format}).
+Brad Miller---@file{gnus-gl.el} and the GroupLens manual section.
@item
-A new command has been added to remove all data on articles from
-the native server (@pxref{Changing Servers}).
+Sudish Joseph---innumerable bug fixes.
@item
-A new command for reading collections of documents
-(@code{nndoc} with @code{nnvirtual} on top) has been added---@kbd{M-C-d}
-(@pxref{Really Various Summary Commands}).
+Ilja Weis---@file{gnus-topic.el}.
@item
-Process mark sets can be pushed and popped (@pxref{Setting Process
-Marks}).
+Steven L. Baur---lots and lots and lots of bugs detections and fixes.
@item
-A new mail-to-news backend makes it possible to post even when the NNTP
-server doesn't allow posting (@pxref{Mail-To-News Gateways}).
+Vladimir Alexiev---the refcard and reference booklets.
@item
-A new backend for reading searches from Web search engines
-(@dfn{DejaNews}, @dfn{Alta Vista}, @dfn{InReference}) has been added
-(@pxref{Web Searches}).
+Felix Lee & Jamie Zawinski---I stole some pieces from the XGnus
+distribution by Felix Lee and JWZ.
@item
-Groups inside topics can now be sorted using the standard sorting
-functions, and each topic can be sorted independently (@pxref{Topic
-Sorting}).
+Scott Byer---@file{nnfolder.el} enhancements & rewrite.
@item
-Subsets of the groups can be sorted independently (@code{Sorting
-Groups}).
+Peter Mutsaers---orphan article scoring code.
@item
-Cached articles can be pulled into the groups (@pxref{Summary Generation
-Commands}).
-@iftex
-@iflatex
-\marginpar[\mbox{}\hfill\epsfig{figure=tmp/fred.ps,width=3cm}]{\epsfig{figure=tmp/fred.ps,width=3cm}}
-@end iflatex
-@end iftex
+Ken Raeburn---POP mail support.
@item
-Score files are now applied in a more reliable order (@pxref{Score
-Variables}).
+Hallvard B Furuseth---various bits and pieces, especially dealing with
+.newsrc files.
@item
-Reports on where mail messages end up can be generated (@pxref{Splitting
-Mail}).
+Brian Edmonds---@file{gnus-bbdb.el}.
@item
-More hooks and functions have been added to remove junk from incoming
-mail before saving the mail (@pxref{Washing Mail}).
+David Moore---rewrite of @file{nnvirtual.el} and many other things.
@item
-Emphasized text can be properly fontisized:
-
-@end itemize
-
-
-@node Quassia Gnus
-@subsubsection Quassia Gnus
-
-New features in Gnus 5.6:
-
-@itemize @bullet
+Kevin Davidson---came up with the name @dfn{ding}, so blame him.
@item
-New functionality for using Gnus as an offline newsreader has been
-added. A plethora of new commands and modes have been added. See
-@pxref{Gnus Unplugged} for the full story.
+Fran@,{c}ois Pinard---many, many interesting and thorough bug reports, as
+well as autoconf support.
-@item
- The @code{nndraft} backend has returned, but works differently than
-before. All Message buffers are now also articles in the @code{nndraft}
-group, which is created automatically.
+@end itemize
-@item
-@code{gnus-alter-header-function} can now be used to alter header
-values.
+This manual was proof-read by Adrian Aichner, with Ricardo Nassif, Mark
+Borges, and Jost Krieger proof-reading parts of the manual.
-@item
- @code{gnus-summary-goto-article} now accept Message-ID's.
+The following people have contributed many patches and suggestions:
-@item
- A new Message command for deleting text in the body of a message
-outside the region: @kbd{C-c C-v}.
+Christopher Davis,
+Andrew Eskilsson,
+Kai Grossjohann,
+Kevin Greiner,
+Jesper Harder,
+Paul Jarc,
+Simon Josefsson,
+David K@aa{}gedal,
+Richard Pieri,
+Fabrice Popineau,
+Daniel Quinlan,
+Michael Shields,
+Reiner Steib,
+Jason L. Tibbitts, III,
+Jack Vinson,
+Katsumi Yamaoka, @c Yamaoka
+and
+Teodor Zlatanov.
-@item
- You can now post to component group in @code{nnvirtual} groups with
-@kbd{C-u C-c C-c}.
+Also thanks to the following for patches and stuff:
-@item
- @code{nntp-rlogin-program}---new variable to ease customization.
+Jari Aalto,
+Adrian Aichner,
+Vladimir Alexiev,
+Russ Allbery,
+Peter Arius,
+Matt Armstrong,
+Marc Auslander,
+Miles Bader,
+Alexei V. Barantsev,
+Frank Bennett,
+Robert Bihlmeyer,
+Chris Bone,
+Mark Borges,
+Mark Boyns,
+Lance A. Brown,
+Rob Browning,
+Kees de Bruin,
+Martin Buchholz,
+Joe Buehler,
+Kevin Buhr,
+Alastair Burt,
+Joao Cachopo,
+Zlatko Calusic,
+Massimo Campostrini,
+Castor,
+David Charlap,
+Dan Christensen,
+Kevin Christian,
+Jae-you Chung, @c ?
+James H. Cloos, Jr.,
+Laura Conrad,
+Michael R. Cook,
+Glenn Coombs,
+Andrew J. Cosgriff,
+Neil Crellin,
+Frank D. Cringle,
+Geoffrey T. Dairiki,
+Andre Deparade,
+Ulrik Dickow,
+Dave Disser,
+Rui-Tao Dong, @c ?
+Joev Dubach,
+Michael Welsh Duggan,
+Dave Edmondson,
+Paul Eggert,
+Mark W. Eichin,
+Karl Eichwalder,
+Enami Tsugutomo, @c Enami
+Michael Ernst,
+Luc Van Eycken,
+Sam Falkner,
+Nelson Jose dos Santos Ferreira,
+Sigbjorn Finne,
+Sven Fischer,
+Paul Fisher,
+Decklin Foster,
+Gary D. Foster,
+Paul Franklin,
+Guy Geens,
+Arne Georg Gleditsch,
+David S. Goldberg,
+Michelangelo Grigni,
+Dale Hagglund,
+D. Hall,
+Magnus Hammerin,
+Kenichi Handa, @c Handa
+Raja R. Harinath,
+Yoshiki Hayashi, @c Hayashi
+P. E. Jareth Hein,
+Hisashige Kenji, @c Hisashige
+Scott Hofmann,
+Marc Horowitz,
+Gunnar Horrigmo,
+Richard Hoskins,
+Brad Howes,
+Miguel de Icaza,
+Fran@,{c}ois Felix Ingrand,
+Tatsuya Ichikawa, @c Ichikawa
+Ishikawa Ichiro, @c Ishikawa
+Lee Iverson,
+Iwamuro Motonori, @c Iwamuro
+Rajappa Iyer,
+Andreas Jaeger,
+Adam P. Jenkins,
+Randell Jesup,
+Fred Johansen,
+Gareth Jones,
+Greg Klanderman,
+Karl Kleinpaste,
+Michael Klingbeil,
+Peter Skov Knudsen,
+Shuhei Kobayashi, @c Kobayashi
+Petr Konecny,
+Koseki Yoshinori, @c Koseki
+Thor Kristoffersen,
+Jens Lautenbacher,
+Martin Larose,
+Seokchan Lee, @c Lee
+Joerg Lenneis,
+Carsten Leonhardt,
+James LewisMoss,
+Christian Limpach,
+Markus Linnala,
+Dave Love,
+Mike McEwan,
+Tonny Madsen,
+Shlomo Mahlab,
+Nat Makarevitch,
+Istvan Marko,
+David Martin,
+Jason R. Mastaler,
+Gordon Matzigkeit,
+Timo Metzemakers,
+Richard Mlynarik,
+Lantz Moore,
+Morioka Tomohiko, @c Morioka
+Erik Toubro Nielsen,
+Hrvoje Niksic,
+Andy Norman,
+Fred Oberhauser,
+C. R. Oldham,
+Alexandre Oliva,
+Ken Olstad,
+Masaharu Onishi, @c Onishi
+Hideki Ono, @c Ono
+Ettore Perazzoli,
+William Perry,
+Stephen Peters,
+Jens-Ulrik Holger Petersen,
+Ulrich Pfeifer,
+Matt Pharr,
+Andy Piper,
+John McClary Prevost,
+Bill Pringlemeir,
+Mike Pullen,
+Jim Radford,
+Colin Rafferty,
+Lasse Rasinen,
+Lars Balker Rasmussen,
+Joe Reiss,
+Renaud Rioboo,
+Roland B. Roberts,
+Bart Robinson,
+Christian von Roques,
+Markus Rost,
+Jason Rumney,
+Wolfgang Rupprecht,
+Jay Sachs,
+Dewey M. Sasser,
+Conrad Sauerwald,
+Loren Schall,
+Dan Schmidt,
+Ralph Schleicher,
+Philippe Schnoebelen,
+Andreas Schwab,
+Randal L. Schwartz,
+Danny Siu,
+Matt Simmons,
+Paul D. Smith,
+Jeff Sparkes,
+Toby Speight,
+Michael Sperber,
+Darren Stalder,
+Richard Stallman,
+Greg Stark,
+Sam Steingold,
+Paul Stevenson,
+Jonas Steverud,
+Paul Stodghill,
+Kiyokazu Suto, @c Suto
+Kurt Swanson,
+Samuel Tardieu,
+Teddy,
+Chuck Thompson,
+Tozawa Akihiko, @c Tozawa
+Philippe Troin,
+James Troup,
+Trung Tran-Duc,
+Jack Twilley,
+Aaron M. Ucko,
+Aki Vehtari,
+Didier Verna,
+Vladimir Volovich,
+Jan Vroonhof,
+Stefan Waldherr,
+Pete Ware,
+Barry A. Warsaw,
+Christoph Wedler,
+Joe Wells,
+Lee Willis,
+and
+Lloyd Zusman.
-@item
- @code{C-u C-c C-c} in @code{gnus-article-edit-mode} will now inhibit
-re-highlighting of the article buffer.
-@item
- New element in @code{gnus-boring-article-headers}---@code{long-to}.
+For a full overview of what each person has done, the ChangeLogs
+included in the Gnus alpha distributions should give ample reading
+(550kB and counting).
-@item
- @kbd{M-i} symbolic prefix command. See the section "Symbolic
-Prefixes" in the Gnus manual for details.
+Apologies to everybody that I've forgotten, of which there are many, I'm
+sure.
-@item
- @kbd{L} and @kbd{I} in the summary buffer now take the symbolic prefix
-@kbd{a} to add the score rule to the "all.SCORE" file.
+Gee, that's quite a list of people. I guess that must mean that there
+actually are people who are using Gnus. Who'd'a thunk it!
-@item
- @code{gnus-simplify-subject-functions} variable to allow greater
-control over simplification.
-@item
- @kbd{A T}---new command for fetching the current thread.
+@node New Features
+@subsection New Features
+@cindex new features
-@item
- @kbd{/ T}---new command for including the current thread in the
-limit.
+@menu
+* ding Gnus:: New things in Gnus 5.0/5.1, the first new Gnus.
+* September Gnus:: The Thing Formally Known As Gnus 5.2/5.3.
+* Red Gnus:: Third time best---Gnus 5.4/5.5.
+* Quassia Gnus:: Two times two is four, or Gnus 5.6/5.7.
+* Pterodactyl Gnus:: Pentad also starts with P, AKA Gnus 5.8/5.9.
+* Oort Gnus:: It's big. It's far out. Gnus 5.10.
+* No Gnus:: Lars, FIXME!
+@end menu
-@item
- @kbd{M-RET} is a new Message command for breaking cited text.
+These lists are, of course, just @emph{short} overviews of the
+@emph{most} important new features. No, really. There are tons more.
+Yes, we have feeping creaturism in full effect.
-@item
- @samp{\\1}-expressions are now valid in @code{nnmail-split-methods}.
+@node ding Gnus
+@subsubsection (ding) Gnus
-@item
- The @code{custom-face-lookup} function has been removed.
-If you used this function in your initialization files, you must
-rewrite them to use @code{face-spec-set} instead.
+New features in Gnus 5.0/5.1:
-@item
- Canceling now uses the current select method. Symbolic prefix
-@kbd{a} forces normal posting method.
+@itemize @bullet
@item
- New command to translate M******** sm*rtq**t*s into proper
-text---@kbd{W d}.
+The look of all buffers can be changed by setting format-like variables
+(@pxref{Group Buffer Format} and @pxref{Summary Buffer Format}).
@item
- For easier debugging of @code{nntp}, you can set
-@code{nntp-record-commands} to a non-@code{nil} value.
+Local spool and several @acronym{NNTP} servers can be used at once
+(@pxref{Select Methods}).
@item
- @code{nntp} now uses @file{~/.authinfo}, a @file{.netrc}-like file, for
-controlling where and how to send @sc{authinfo} to @sc{nntp} servers.
+You can combine groups into virtual groups (@pxref{Virtual Groups}).
@item
- A command for editing group parameters from the summary buffer
-has been added.
+You can read a number of different mail formats (@pxref{Getting Mail}).
+All the mail back ends implement a convenient mail expiry scheme
+(@pxref{Expiring Mail}).
@item
- A history of where mails have been split is available.
+Gnus can use various strategies for gathering threads that have lost
+their roots (thereby gathering loose sub-threads into one thread) or it
+can go back and retrieve enough headers to build a complete thread
+(@pxref{Customizing Threading}).
@item
- A new article date command has been added---@code{article-date-iso8601}.
+Killed groups can be displayed in the group buffer, and you can read
+them as well (@pxref{Listing Groups}).
@item
- Subjects can be simplified when threading by setting
-@code{gnus-score-thread-simplify}.
+Gnus can do partial group updates---you do not have to retrieve the
+entire active file just to check for new articles in a few groups
+(@pxref{The Active File}).
@item
- A new function for citing in Message has been
-added---@code{message-cite-original-without-signature}.
+Gnus implements a sliding scale of subscribedness to groups
+(@pxref{Group Levels}).
@item
- @code{article-strip-all-blank-lines}---new article command.
+You can score articles according to any number of criteria
+(@pxref{Scoring}). You can even get Gnus to find out how to score
+articles for you (@pxref{Adaptive Scoring}).
@item
- A new Message command to kill to the end of the article has
-been added.
+Gnus maintains a dribble buffer that is auto-saved the normal Emacs
+manner, so it should be difficult to lose much data on what you have
+read if your machine should go down (@pxref{Auto Save}).
@item
- A minimum adaptive score can be specified by using the
-@code{gnus-adaptive-word-minimum} variable.
+Gnus now has its own startup file (@file{~/.gnus.el}) to avoid
+cluttering up the @file{.emacs} file.
@item
- The "lapsed date" article header can be kept continually
-updated by the @code{gnus-start-date-timer} command.
+You can set the process mark on both groups and articles and perform
+operations on all the marked items (@pxref{Process/Prefix}).
@item
- Web listserv archives can be read with the @code{nnlistserv} backend.
+You can grep through a subset of groups and create a group from the
+results (@pxref{Kibozed Groups}).
@item
- Old dejanews archives can now be read by @code{nnweb}.
-
-@end itemize
-
-
-@node Newest Features
-@subsection Newest Features
-@cindex todo
-
-Also known as the @dfn{todo list}. Sure to be implemented before the
-next millennium.
-
-Be afraid. Be very afraid.
-
-(That a feature appears in this list doesn't necessarily mean that I've
-decided to actually implement it. It just means that I think it sounds
-interesting.)
-
-(Yes, this is the actual, up-to-the-second todo list.)
-
-@itemize @bullet
+You can list subsets of groups according to, well, anything
+(@pxref{Listing Groups}).
@item
- I would like the zombie-page to contain an URL to the source of the
-latest version of gnus or some explanation on where to find it.
+You can browse foreign servers and subscribe to groups from those
+servers (@pxref{Browse Foreign Server}).
@item
- A way to continue editing the latest Message composition.
+Gnus can fetch articles, asynchronously, on a second connection to the
+server (@pxref{Asynchronous Fetching}).
@item
- http://www.sonicnet.com/feature/ari3/
+You can cache articles locally (@pxref{Article Caching}).
@item
- facep is not declared.
+The uudecode functions have been expanded and generalized
+(@pxref{Decoding Articles}).
@item
- Include a section in the manual on why the number of articles
-isn't the same in the group buffer and on the SPC prompt.
+You can still post uuencoded articles, which was a little-known feature
+of @sc{gnus}' past (@pxref{Uuencoding and Posting}).
@item
- Interacting with rmail fcc isn't easy.
+Fetching parents (and other articles) now actually works without
+glitches (@pxref{Finding the Parent}).
@item
-@example
- Hypermail:
-<URL:http://www.falch.no/people/pepper/DSSSL-Lite/archives/>
-<URL:http://www.eit.com/software/hypermail/hypermail.html>
-<URL:http://homer.ncm.com/>
-<URL:http://www.yahoo.com/Computers_and_Internet/Internet/World_Wide_Web/HTML_Converters/>
-http://www.uwsg.indiana.edu/hypermail/linux/kernel/9610/index.html
-<URL:http://union.ncsa.uiuc.edu/HyperNews/get/www/html/converters.html>
-http://www.miranova.com/gnus-list/
-
-@end example
+Gnus can fetch @acronym{FAQ}s and group descriptions (@pxref{Group Information}).
@item
-@samp{^-- } is made into - in LaTeX.
+Digests (and other files) can be used as the basis for groups
+(@pxref{Document Groups}).
@item
- gnus-kill is much slower than it was in GNUS 4.1.3.
+Articles can be highlighted and customized (@pxref{Customizing
+Articles}).
@item
- when expunging articles on low score, the sparse nodes keep hanging on?
-@item
- starting the first time seems to hang Gnus on some systems. Does
-NEWGROUPS answer too fast?
-@item
- nndir doesn't read gzipped files.
-@item
- FAQ doesn't have an up node?
-@item
- when moving mail from a procmail spool to the crash-box,
-the crash-box is only appropriate to one specific group.
-@item
- `t' `t' makes X-Faces disappear.
-@item
- nnmh-be-safe means that crossposted articles will
-be marked as unread.
-@item
- Orphan score entries don't show on "V t" score trace
-@item
- when clearing out data, the cache data should also be reset.
-@item
- rewrite gnus-summary-limit-children to be non-recursive
-to avoid exceeding lisp nesting on huge groups.
-@item
- expunged articles are counted when computing scores.
-@item
- implement gnus-batch-brew-soup
-@item
- ticked articles aren't easy to read in pick mode -- `n' and
-stuff just skips past them. Read articles are the same.
-@item
- topics that contain just groups with ticked
-articles aren't displayed.
-@item
- nndoc should always allocate unique Message-IDs.
-@item
- If there are mail groups the first time you use Gnus, Gnus'll
-make the mail groups killed.
-@item
- no "no news is good news" when using topics.
-@item
- when doing crosspost marking, the cache has to be consulted
-and articles have to be removed.
-@item
- nnweb should fetch complete articles when they are split into several
-parts.
-@item
- scoring on head immediate doesn't work.
-@item
- finding short score file names takes forever.
-@item
- canceling articles in foreign groups.
-@item
- nntp-open-rlogin no longer works.
-@item
- C-u C-x C-s (Summary) switches to the group buffer.
-@item
- move nnmail-split-history out to the backends.
-@item
- nnweb doesn't work properly.
-@item
- using a virtual server name as `gnus-select-method' doesn't work?
-@item
- when killing/yanking a group from one topic to another in a slave, the
-master will yank it first to one topic and then add it to another.
-Perhaps.
+URLs and other external references can be buttonized (@pxref{Article
+Buttons}).
@item
- warn user about `=' redirection of a group in the active file?
-@item
- take over the XEmacs menubar and offer a toggle between the XEmacs
-bar and the Gnus bar.
-@item
-@example
- push active file and NOV file parsing down into C code.
-`(canonize-message-id id)'
-`(mail-parent-message-id references n)'
-`(parse-news-nov-line &optional dependency-hashtb)'
-`(parse-news-nov-region beg end &optional dependency-hashtb fullp)'
-`(parse-news-active-region beg end hashtb)'
-
-@end example
+You can do lots of strange stuff with the Gnus window & frame
+configuration (@pxref{Window Layout}).
@item
- nnml .overview directory with splits.
-@item
- asynchronous cache
-@item
- postponed commands.
-@item
- the selected article show have its Subject displayed in its summary line.
-@item
- when entering groups, get the real number of unread articles from
-the server?
-@item
- sort after gathering threads -- make false roots have the
-headers of the oldest orphan with a 0 article number?
-@item
- nndoc groups should inherit the score files of their parents? Also
-inherit copy prompts and save files.
-@item
- command to start up Gnus (if not running) and enter a mail mode buffer.
-@item
- allow editing the group description from the group buffer
-for backends that support that.
-@item
-gnus-hide,show-all-topics
-@item
- groups and sub-topics should be allowed to mingle inside each topic,
-and not just list all subtopics at the end.
-@item
- a command to remove all read articles that are not needed to connect
-threads -- `gnus-summary-limit-to-sparse-unread'?
-@item
- a variable to turn off limiting/cutting of threads in the tree buffer.
-@item
- a variable to limit how many files are uudecoded.
-@item
- add zombie groups to a special "New Groups" topic.
-@item
- server mode command: close/open all connections
-@item
- put a file date in gnus-score-alist and check whether the file
-has been changed before using it.
-@item
- on exit from a digest group, go to the next article in the parent group.
-@item
- hide (sub)threads with low score.
-@item
- when expiring, remove all marks from expired articles.
-@item
- gnus-summary-limit-to-body
-@item
- a regexp alist that says what level groups are to be subscribed
-on. Eg. -- `(("nnml:" . 1))'.
-@item
- easier interface to nnkiboze to create ephemeral groups that
-contain groups that match a regexp.
-@item
- allow newlines in <URL:> urls, but remove them before using
-the URL.
-@item
- If there is no From line, the mail backends should fudge one from the
-"From " line.
-@item
- fuzzy simplifying should strip all non-alpha-numerical info
-from subject lines.
-@item
- gnus-soup-brew-soup-with-high-scores.
-@item
- nntp-ping-before-connect
-@item
- command to check whether NOV is evil. "list overview.fmt".
-@item
- when entering a group, Gnus should look through the score
-files very early for `local' atoms and set those local variables.
-@item
- message annotations.
-@item
- topics are always yanked before groups, and that's not good.
-@item
- (set-extent-property extent 'help-echo "String to display in minibuf")
-to display help in the minibuffer on buttons under XEmacs.
-@item
- allow group line format spec to say how many articles there
-are in the cache.
-@item
- AUTHINFO GENERIC
-@item
- support qmail maildir spools
-@item
- `run-with-idle-timer' in gnus-demon.
-@item
- stop using invisible text properties and start using overlays instead
-@item
- C-c C-f C-e to add an Expires header.
-@item
- go from one group to the next; everything is expunged; go to the
-next group instead of going to the group buffer.
-@item
- gnus-renumber-cache -- to renumber the cache using "low" numbers.
-@item
- record topic changes in the dribble buffer.
-@item
- `nnfolder-generate-active-file' should look at the folders it
-finds and generate proper active ranges.
-@item
- nneething-look-in-files-for-article-heads variable to control
-whether nneething should sniff all files in the directories.
-@item
- gnus-fetch-article -- start Gnus, enter group, display article
-@item
- gnus-dont-move-articles-to-same-group variable when respooling.
-@item
- when messages are crossposted between several auto-expirable groups,
-articles aren't properly marked as expirable.
-@item
- nneething should allow deletion/moving.
-@item
- TAB on the last button should go to the first button.
-@item
- if the car of an element in `mail-split-methods' is a function,
-and the function returns non-nil, use that as the name of the group(s) to
-save mail in.
-@item
- command for listing all score files that have been applied.
-@item
- a command in the article buffer to return to `summary' config.
-@item
- `gnus-always-post-using-current-server' -- variable to override
-`C-c C-c' when posting.
-@item
- nnmail-group-spool-alist -- says where each group should use
-as a spool file.
-@item
- when an article is crossposted to an auto-expirable group, the article
-should be marker as expirable.
-@item
- article mode command/menu for "send region as URL to browser".
-@item
- on errors, jump to info nodes that explain the error. For instance,
-on invalid From headers, or on error messages from the nntp server.
-@item
- when gathering threads, make the article that has no "Re: " the parent.
-Also consult Date headers.
-@item
- a token in splits to call shrink-window-if-larger-than-buffer
-@item
- `1 0 A M' to do matches on the active hashtb.
-@item
- duplicates -- command to remove Gnus-Warning header, use the read
-Message-ID, delete the "original".
-@item
- when replying to several messages at once, put the "other" message-ids
-into a See-Also header.
-@item
- support setext: URL:http://www.bsdi.com/setext/
-@item
- support ProleText: <URL:http://proletext.clari.net/prole/proletext.html>
-@item
- when browsing a foreign server, the groups that are already subscribed
-should be listed as such and not as "K".
-@item
- generate font names dynamically.
-@item
- score file mode auto-alist.
-@item
- allow nndoc to change/add/delete things from documents. Implement
-methods for each format for adding an article to the document.
-@item
- `gnus-fetch-old-headers' `all' value to incorporate
-absolutely all headers there is.
-@item
- function like `|', but concatenate all marked articles
-and pipe them to the process.
-@item
- cache the list of killed (or active) groups in a separate file. Update
-the file whenever we read the active file or the list
-of killed groups in the .eld file reaches a certain length.
-@item
- function for starting to edit a file to put into
-the current mail group.
-@item
- score-find-trace should display the total score of the article.
-@item
- "ghettozie" -- score on Xref header and nix it out after using it
-to avoid marking as read in other groups it has been crossposted to.
-@item
- look at procmail splitting. The backends should create
-the groups automatically if a spool file exists for that group.
-@item
- function for backends to register themselves with Gnus.
-@item
- when replying to several process-marked articles,
-have all the From end up in Cc headers? Variable to toggle.
-@item
- command to delete a crossposted mail article from all
-groups it has been mailed to.
-@item
- `B c' and `B m' should be crosspost aware.
-@item
- hide-pgp should also hide PGP public key blocks.
-@item
- Command in the group buffer to respool process-marked groups.
-@item
- `gnus-summary-find-matching' should accept
-pseudo-"headers" like "body", "head" and "all"
-@item
- When buttifying <URL: > things, all white space (including
-newlines) should be ignored.
-@item
- Process-marking all groups in a topic should process-mark
-groups in subtopics as well.
-@item
- Add non-native groups to the list of killed groups when killing them.
-@item
- nntp-suggest-kewl-config to probe the nntp server and suggest
-variable settings.
-@item
- add edit and forward secondary marks.
-@item
- nnml shouldn't visit its .overview files.
-@item
- allow customizing sorting within gathered threads.
-@item
- `B q' shouldn't select the current article.
-@item
- nnmbox should support a newsgroups file for descriptions.
+You can click on buttons instead of using the keyboard
+(@pxref{Buttons}).
+
+@end itemize
+
+
+@node September Gnus
+@subsubsection September Gnus
+
+@iftex
+@iflatex
+\gnusfig{-28cm}{0cm}{\epsfig{figure=ps/september,height=20cm}}
+@end iflatex
+@end iftex
+
+New features in Gnus 5.2/5.3:
+
+@itemize @bullet
+
@item
- allow fetching mail from several pop servers.
+A new message composition mode is used. All old customization variables
+for @code{mail-mode}, @code{rnews-reply-mode} and @code{gnus-msg} are
+now obsolete.
+
@item
- Be able to specify whether the saving commands save the original
-or the formatted article.
+Gnus is now able to generate @dfn{sparse} threads---threads where
+missing articles are represented by empty nodes (@pxref{Customizing
+Threading}).
+
+@lisp
+(setq gnus-build-sparse-threads 'some)
+@end lisp
+
@item
- a command to reparent with the child process-marked (cf. `T ^'.).
+Outgoing articles are stored on a special archive server
+(@pxref{Archived Messages}).
+
@item
- I think the possibility to send a password with nntp-open-rlogin
-should be a feature in Red Gnus.
+Partial thread regeneration now happens when articles are
+referred.
+
@item
- The `Z n' command should be possible to execute from a mouse click.
+Gnus can make use of GroupLens predictions.
+
@item
- more limiting functions -- date, etc.
+Picons (personal icons) can be displayed under XEmacs (@pxref{Picons}).
+
@item
- be able to limit on a random header; on body; using reverse matches.
+A @code{trn}-like tree buffer can be displayed (@pxref{Tree Display}).
+
+@lisp
+(setq gnus-use-trees t)
+@end lisp
+
@item
- a group parameter (`absofucking-total-expiry') that will make Gnus expire
-even unread articles.
+An @code{nn}-like pick-and-read minor mode is available for the summary
+buffers (@pxref{Pick and Read}).
+
+@lisp
+(add-hook 'gnus-summary-mode-hook 'gnus-pick-mode)
+@end lisp
+
@item
- a command to print the article buffer as postscript.
+In binary groups you can use a special binary minor mode (@pxref{Binary
+Groups}).
+
@item
- variable to disable password fetching when opening by nntp-open-telnet.
+Groups can be grouped in a folding topic hierarchy (@pxref{Group
+Topics}).
+
+@lisp
+(add-hook 'gnus-group-mode-hook 'gnus-topic-mode)
+@end lisp
+
@item
- manual: more example servers -- nntp with rlogin, telnet
+Gnus can re-send and bounce mail (@pxref{Summary Mail Commands}).
+
@item
- checking for bogus groups should clean topic alists as well.
+Groups can now have a score, and bubbling based on entry frequency
+is possible (@pxref{Group Score}).
+
+@lisp
+(add-hook 'gnus-summary-exit-hook 'gnus-summary-bubble-group)
+@end lisp
+
@item
- canceling articles in foreign groups.
+Groups can be process-marked, and commands can be performed on
+groups of groups (@pxref{Marking Groups}).
+
@item
- article number in folded topics isn't properly updated by
-Xref handling.
+Caching is possible in virtual groups.
+
@item
- Movement in the group buffer to the next unread group should go to the
-next closed topic with unread messages if no group can be found.
+@code{nndoc} now understands all kinds of digests, mail boxes, rnews
+news batches, ClariNet briefs collections, and just about everything
+else (@pxref{Document Groups}).
+
@item
- Extensive info pages generated on the fly with help everywhere --
-in the "*Gnus edit*" buffers, for instance.
+Gnus has a new back end (@code{nnsoup}) to create/read SOUP packets
+(@pxref{SOUP}).
+
@item
- Topic movement commands -- like thread movement. Up, down, forward, next.
+The Gnus cache is much faster.
+
@item
- a way to tick/mark as read Gcc'd articles.
+Groups can be sorted according to many criteria (@pxref{Sorting
+Groups}).
+
@item
- a way to say that all groups within a specific topic comes
-from a particular server? Hm.
+New group parameters have been introduced to set list-addresses and
+expiry times (@pxref{Group Parameters}).
+
@item
- `gnus-article-fill-if-long-lines' -- a function to fill
-the article buffer if there are any looong lines there.
+All formatting specs allow specifying faces to be used
+(@pxref{Formatting Fonts}).
+
@item
- `T h' should jump to the parent topic and fold it.
+There are several more commands for setting/removing/acting on process
+marked articles on the @kbd{M P} submap (@pxref{Setting Process Marks}).
+
@item
- a command to create an ephemeral nndoc group out of a file,
-and then splitting it/moving it to some other group/backend.
+The summary buffer can be limited to show parts of the available
+articles based on a wide range of criteria. These commands have been
+bound to keys on the @kbd{/} submap (@pxref{Limiting}).
+
@item
- a group parameter for nnkiboze groups that says that
-all kibozed articles should be entered into the cache.
+Articles can be made persistent with the @kbd{*} command
+(@pxref{Persistent Articles}).
+
@item
- It should also probably be possible to delimit what
-`gnus-jog-cache' does -- for instance, work on just some groups, or on
-some levels, and entering just articles that have a score higher than
-a certain number.
+All functions for hiding article elements are now toggles.
+
@item
- nnfolder should append to the folder instead of re-writing
-the entire folder to disk when accepting new messages.
+Article headers can be buttonized (@pxref{Article Washing}).
+
@item
- allow all backends to do the proper thing with .gz files.
+All mail back ends support fetching articles by @code{Message-ID}.
+
@item
- a backend for reading collections of babyl files nnbabylfolder?
+Duplicate mail can now be treated properly (@pxref{Duplicates}).
+
@item
- a command for making the native groups into foreign groups.
+All summary mode commands are available directly from the article
+buffer (@pxref{Article Keymap}).
+
@item
- server mode command for clearing read marks from all groups
-from a server.
+Frames can be part of @code{gnus-buffer-configuration} (@pxref{Window
+Layout}).
+
@item
- when following up multiple articles, include all To, Cc, etc headers
-from all articles.
+Mail can be re-scanned by a daemonic process (@pxref{Daemons}).
+@iftex
+@iflatex
+\marginpar[\mbox{}\hfill\epsfig{figure=ps/fseptember,height=5cm}]{\epsfig{figure=ps/fseptember,height=5cm}}
+@end iflatex
+@end iftex
+
@item
- a command for deciding what the total score of the current
-thread is. Also a way to highlight based on this.
+Gnus can make use of NoCeM files to weed out spam (@pxref{NoCeM}).
+
+@lisp
+(setq gnus-use-nocem t)
+@end lisp
+
@item
- command to show and edit group scores
+Groups can be made permanently visible (@pxref{Listing Groups}).
+
+@lisp
+(setq gnus-permanently-visible-groups "^nnml:")
+@end lisp
+
@item
- a gnus-tree-minimize-horizontal to minimize tree buffers
-horizontally.
+Many new hooks have been introduced to make customizing easier.
+
@item
- command to generate nnml overview file for one group.
+Gnus respects the @code{Mail-Copies-To} header.
+
@item
- `C-u C-u a' -- prompt for many crossposted groups.
+Threads can be gathered by looking at the @code{References} header
+(@pxref{Customizing Threading}).
+
+@lisp
+(setq gnus-summary-thread-gathering-function
+ 'gnus-gather-threads-by-references)
+@end lisp
+
@item
- keep track of which mail groups have received new articles (in this session).
-Be able to generate a report and perhaps do some marking in the group
-buffer.
+Read articles can be stored in a special backlog buffer to avoid
+refetching (@pxref{Article Backlog}).
+
+@lisp
+(setq gnus-keep-backlog 50)
+@end lisp
+
@item
- gnus-build-sparse-threads to a number -- build only sparse threads
-that are of that length.
+A clean copy of the current article is always stored in a separate
+buffer to allow easier treatment.
+
@item
- have nnmh respect mh's unseen sequence in .mh_profile.
+Gnus can suggest where to save articles (@pxref{Saving Articles}).
+
@item
- cache the newsgroups descriptions locally.
+Gnus doesn't have to do as much prompting when saving (@pxref{Saving
+Articles}).
+
+@lisp
+(setq gnus-prompt-before-saving t)
+@end lisp
+
@item
- asynchronous posting under nntp.
+@code{gnus-uu} can view decoded files asynchronously while fetching
+articles (@pxref{Other Decode Variables}).
+
+@lisp
+(setq gnus-uu-grabbed-file-functions 'gnus-uu-grab-view)
+@end lisp
+
@item
- be able to control word adaptive scoring from the score files.
+Filling in the article buffer now works properly on cited text
+(@pxref{Article Washing}).
+
@item
- a variable to make `C-c C-c' post using the "current" select method.
+Hiding cited text adds buttons to toggle hiding, and how much
+cited text to hide is now customizable (@pxref{Article Hiding}).
+
+@lisp
+(setq gnus-cited-lines-visible 2)
+@end lisp
+
@item
- `limit-exclude-low-scored-articles'.
+Boring headers can be hidden (@pxref{Article Hiding}).
+
@item
- if `gnus-summary-show-thread' is a number, hide threads that have
-a score lower than this number.
+Default scoring values can now be set from the menu bar.
+
@item
- split newsgroup subscription variable up into "order" and "method".
+Further syntax checking of outgoing articles have been added.
+
+@end itemize
+
+
+@node Red Gnus
+@subsubsection Red Gnus
+
+New features in Gnus 5.4/5.5:
+
+@iftex
+@iflatex
+\gnusfig{-5.5cm}{-4cm}{\epsfig{figure=ps/red,height=20cm}}
+@end iflatex
+@end iftex
+
+@itemize @bullet
+
@item
- buttonize ange-ftp file names.
+@file{nntp.el} has been totally rewritten in an asynchronous fashion.
+
@item
- a command to make a duplicate copy of the current article
-so that each copy can be edited separately.
+Article prefetching functionality has been moved up into
+Gnus (@pxref{Asynchronous Fetching}).
+
@item
- nnweb should allow fetching from the local nntp server.
+Scoring can now be performed with logical operators like @code{and},
+@code{or}, @code{not}, and parent redirection (@pxref{Advanced
+Scoring}).
+
@item
- record the sorting done in the summary buffer so that
-it can be repeated when limiting/regenerating the buffer.
+Article washing status can be displayed in the
+article mode line (@pxref{Misc Article}).
+
@item
- nnml-generate-nov-databses should generate for
-all nnml servers.
+@file{gnus.el} has been split into many smaller files.
+
@item
- when the user does commands in the group buffer, check
-the modification time of the .newsrc.eld file and use
-ask-user-about-supersession-threat. Also warn when trying
-to save .newsrc.eld and it has changed.
+Suppression of duplicate articles based on Message-ID can be done
+(@pxref{Duplicate Suppression}).
+
+@lisp
+(setq gnus-suppress-duplicates t)
+@end lisp
+
@item
- M-g on a topic will display all groups with 0 articles in
-the topic.
+New variables for specifying what score and adapt files are to be
+considered home score and adapt files (@pxref{Home Score File}) have
+been added.
+
@item
- command to remove all topic stuff.
+@code{nndoc} was rewritten to be easily extendable (@pxref{Document
+Server Internals}).
+
@item
- allow exploding incoming digests when reading incoming mail
-and splitting the resulting digests.
+Groups can inherit group parameters from parent topics (@pxref{Topic
+Parameters}).
+
@item
- nnsoup shouldn't set the `message-' variables.
+Article editing has been revamped and is now actually usable.
+
@item
- command to nix out all nnoo state information.
+Signatures can be recognized in more intelligent fashions
+(@pxref{Article Signature}).
+
@item
- nnmail-process-alist that calls functions if group names
-matches an alist -- before saving.
+Summary pick mode has been made to look more @code{nn}-like. Line
+numbers are displayed and the @kbd{.} command can be used to pick
+articles (@code{Pick and Read}).
+
@item
- use buffer-invisibility-spec everywhere for hiding text.
+Commands for moving the @file{.newsrc.eld} from one server to
+another have been added (@pxref{Changing Servers}).
+
@item
- variable to activate each group before entering them
-to get the (new) number of articles. `gnus-activate-before-entering'.
+There's a way now to specify that ``uninteresting'' fields be suppressed
+when generating lines in buffers (@pxref{Advanced Formatting}).
+
@item
- command to fetch a Message-ID from any buffer, even
-starting Gnus first if necessary.
+Several commands in the group buffer can be undone with @kbd{C-M-_}
+(@pxref{Undo}).
+
@item
- when posting and checking whether a group exists or not, just
-ask the nntp server instead of relying on the active hashtb.
+Scoring can be done on words using the new score type @code{w}
+(@pxref{Score File Format}).
+
@item
- buttonize the output of `C-c C-a' in an apropos-like way.
+Adaptive scoring can be done on a Subject word-by-word basis
+(@pxref{Adaptive Scoring}).
+
+@lisp
+(setq gnus-use-adaptive-scoring '(word))
+@end lisp
+
@item
- `G p' should understand process/prefix, and allow editing
-of several groups at once.
+Scores can be decayed (@pxref{Score Decays}).
+
+@lisp
+(setq gnus-decay-scores t)
+@end lisp
+
@item
- command to create an ephemeral nnvirtual group that
-matches some regexp(s).
+Scoring can be performed using a regexp on the Date header. The Date is
+normalized to compact ISO 8601 format first (@pxref{Score File Format}).
+
@item
- nndoc should understand "Content-Type: message/rfc822" forwarded messages.
+A new command has been added to remove all data on articles from
+the native server (@pxref{Changing Servers}).
+
@item
- it should be possible to score "thread" on the From header.
+A new command for reading collections of documents
+(@code{nndoc} with @code{nnvirtual} on top) has been added---@kbd{C-M-d}
+(@pxref{Really Various Summary Commands}).
+
@item
- hitting RET on a "gnus-uu-archive" pseudo article should unpack it.
+Process mark sets can be pushed and popped (@pxref{Setting Process
+Marks}).
+
@item
- `B i' should display the article at once in the summary buffer.
+A new mail-to-news back end makes it possible to post even when the @acronym{NNTP}
+server doesn't allow posting (@pxref{Mail-To-News Gateways}).
+
@item
- remove the "*" mark at once when unticking an article.
+A new back end for reading searches from Web search engines
+(@dfn{DejaNews}, @dfn{Alta Vista}, @dfn{InReference}) has been added
+(@pxref{Web Searches}).
+
@item
- `M-s' should highlight the matching text.
+Groups inside topics can now be sorted using the standard sorting
+functions, and each topic can be sorted independently (@pxref{Topic
+Sorting}).
+
@item
- when checking for duplicated mails, use Resent-Message-ID if present.
+Subsets of the groups can be sorted independently (@code{Sorting
+Groups}).
+
@item
- killing and yanking groups in topics should be better. If killing one copy
-of a group that exists in multiple topics, only that copy should
-be removed. Yanking should insert the copy, and yanking topics
-should be possible to be interspersed with the other yankings.
+Cached articles can be pulled into the groups (@pxref{Summary Generation
+Commands}).
+@iftex
+@iflatex
+\marginpar[\mbox{}\hfill\epsfig{figure=ps/fred,width=3cm}]{\epsfig{figure=ps/fred,width=3cm}}
+@end iflatex
+@end iftex
+
@item
- command for enter a group just to read the cached articles. A way to say
-"ignore the nntp connection; just read from the cache."
+Score files are now applied in a more reliable order (@pxref{Score
+Variables}).
+
@item
- `X u' should decode base64 articles.
+Reports on where mail messages end up can be generated (@pxref{Splitting
+Mail}).
+
@item
- a way to hide all "inner" cited text, leaving just the most
-recently cited text.
+More hooks and functions have been added to remove junk from incoming
+mail before saving the mail (@pxref{Washing Mail}).
+
@item
- nnvirtual should be asynchronous.
+Emphasized text can be properly fontisized:
+
+@end itemize
+
+
+@node Quassia Gnus
+@subsubsection Quassia Gnus
+
+New features in Gnus 5.6:
+
+@itemize @bullet
+
@item
- after editing an article, gnus-original-article-buffer should
-be invalidated.
+New functionality for using Gnus as an offline newsreader has been
+added. A plethora of new commands and modes have been added.
+@xref{Gnus Unplugged}, for the full story.
+
@item
- there should probably be a way to make Gnus not connect to the
-server and just read the articles in the server
+The @code{nndraft} back end has returned, but works differently than
+before. All Message buffers are now also articles in the @code{nndraft}
+group, which is created automatically.
+
@item
- allow a `set-default' (or something) to change the default
-value of nnoo variables.
+@code{gnus-alter-header-function} can now be used to alter header
+values.
+
@item
- a command to import group infos from a .newsrc.eld file.
+@code{gnus-summary-goto-article} now accept Message-ID's.
+
@item
- groups from secondary servers have the entire select method
-listed in each group info.
+A new Message command for deleting text in the body of a message
+outside the region: @kbd{C-c C-v}.
+
@item
- a command for just switching from the summary buffer to the group
-buffer.
+You can now post to component group in @code{nnvirtual} groups with
+@kbd{C-u C-c C-c}.
+
@item
- a way to specify that some incoming mail washing functions
-should only be applied to some groups.
+ @code{nntp-rlogin-program}---new variable to ease customization.
+
@item
- Message `C-f C-t' should ask the user whether to heed
-mail-copies-to: never.
+@code{C-u C-c C-c} in @code{gnus-article-edit-mode} will now inhibit
+re-highlighting of the article buffer.
+
@item
- new group parameter -- `post-to-server' that says to post
-using the current server. Also a variable to do the same.
+New element in @code{gnus-boring-article-headers}---@code{long-to}.
+
@item
- the slave dribble files should auto-save to the slave file names.
+@kbd{M-i} symbolic prefix command. @xref{Symbolic Prefixes}, for
+details.
+
@item
- a group parameter that says what articles to display on group entry, based
-on article marks.
+@kbd{L} and @kbd{I} in the summary buffer now take the symbolic prefix
+@kbd{a} to add the score rule to the @file{all.SCORE} file.
+
@item
- a way to visually distinguish slave Gnusae from masters. (Whip instead
-of normal logo?)
+@code{gnus-simplify-subject-functions} variable to allow greater
+control over simplification.
+
@item
- Use DJ Bernstein "From " quoting/dequoting, where applicable.
+@kbd{A T}---new command for fetching the current thread.
+
@item
- Why is hide-citation-maybe and hide-citation different? Also
-clear up info.
+@kbd{/ T}---new command for including the current thread in the
+limit.
+
@item
- group user-defined meta-parameters.
+@kbd{M-RET} is a new Message command for breaking cited text.
+@item
+@samp{\\1}-expressions are now valid in @code{nnmail-split-methods}.
+@item
+The @code{custom-face-lookup} function has been removed.
+If you used this function in your initialization files, you must
+rewrite them to use @code{face-spec-set} instead.
-From: John Griffith <griffith@@sfs.nphil.uni-tuebingen.de>
@item
- I like the option for trying to retrieve the FAQ for a group and I was
-thinking it would be great if for those newsgroups that had archives
-you could also try to read the archive for that group. Part of the
-problem is that archives are spread all over the net, unlike FAQs.
-What would be best I suppose is to find the one closest to your site.
+Canceling now uses the current select method. Symbolic prefix
+@kbd{a} forces normal posting method.
-In any case, there is a list of general news group archives at @*
-ftp://ftp.neosoft.com/pub/users/claird/news.lists/newsgroup_archives.html
+@item
+New command to translate M******** sm*rtq**t*s into proper
+text---@kbd{W d}.
+@item
+For easier debugging of @code{nntp}, you can set
+@code{nntp-record-commands} to a non-@code{nil} value.
+@item
+@code{nntp} now uses @file{~/.authinfo}, a @file{.netrc}-like file, for
+controlling where and how to send @sc{authinfo} to @acronym{NNTP} servers.
+@item
+A command for editing group parameters from the summary buffer
+has been added.
@item
-@example
-From: Jason L Tibbitts III <tibbs@@hpc.uh.edu>
-(add-hook 'gnus-select-group-hook
- (lambda ()
- (gnus-group-add-parameter group
- (cons 'gnus-group-date-last-entered (list (current-time-string))))))
+A history of where mails have been split is available.
-(defun gnus-user-format-function-d (headers)
- "Return the date the group was last read."
- (cond ((car (gnus-group-get-parameter gnus-tmp-group 'gnus-group-date-last-entered)))
- (t "")))
-@end example
+@item
+A new article date command has been added---@code{article-date-iso8601}.
@item
- tanken var at når du bruker `gnus-startup-file' som prefix (FOO) til å lete
-opp en fil FOO-SERVER, FOO-SERVER.el, FOO-SERVER.eld, kan du la den være en
-liste hvor du bruker hvert element i listen som FOO, istedet. da kunne man
-hatt forskjellige serveres startup-filer forskjellige steder.
+Subjects can be simplified when threading by setting
+@code{gnus-score-thread-simplify}.
+@item
+A new function for citing in Message has been
+added---@code{message-cite-original-without-signature}.
@item
-LMI> Well, nnbabyl could alter the group info to heed labels like
-LMI> answered and read, I guess.
+@code{article-strip-all-blank-lines}---new article command.
-It could also keep them updated (the same for the Status: header of
-unix mbox files).
+@item
+A new Message command to kill to the end of the article has
+been added.
-They could be used like this:
+@item
+A minimum adaptive score can be specified by using the
+@code{gnus-adaptive-word-minimum} variable.
+@item
+The ``lapsed date'' article header can be kept continually
+updated by the @code{gnus-start-date-timer} command.
-@example
-`M l <name> RET' add label <name> to current message.
-`M u <name> RET' remove label <name> from current message.
-`/ l <expr> RET' limit summary buffer according to <expr>.
+@item
+Web listserv archives can be read with the @code{nnlistserv} back end.
-<expr> would be a boolean expression on the labels, e.g.
+@item
+Old dejanews archives can now be read by @code{nnweb}.
-`/ l bug & !fixed RET'
-@end example
+@end itemize
-would show all the messages which are labeled `bug' but not labeled
-`fixed'.
+@node Pterodactyl Gnus
+@subsubsection Pterodactyl Gnus
-One could also imagine the labels being used for highlighting, or
-affect the summary line format.
+New features in Gnus 5.8:
+@itemize @bullet
@item
-Sender: abraham@@dina.kvl.dk
-
-I'd like a gnus-find-file which work like find file, except that it
-would recognize things that looks like messages or folders:
+The mail-fetching functions have changed. See the manual for the
+many details. In particular, all procmail fetching variables are gone.
-- If it is a directory containing numbered files, create an nndir
-summary buffer.
-
-- For other directories, create a nneething summary buffer.
+If you used procmail like in
-- For files matching "\\`From ", create a nndoc/mbox summary.
-
-- For files matching "\\`BABYL OPTIONS:", create a nndoc/baby summary.
+@lisp
+(setq nnmail-use-procmail t)
+(setq nnmail-spool-file 'procmail)
+(setq nnmail-procmail-directory "~/mail/incoming/")
+(setq nnmail-procmail-suffix "\\.in")
+@end lisp
-- For files matching "\\`[^ \t\n]+:", create an *Article* buffer.
+this now has changed to
-- For other files, just find them normally.
+@lisp
+(setq mail-sources
+ '((directory :path "~/mail/incoming/"
+ :suffix ".in")))
+@end lisp
-I'd like `nneething' to use this function, so it would work on a
-directory potentially containing mboxes or babyl files.
+@xref{Mail Source Specifiers}.
@item
-Please send a mail to bwarsaw@@cnri.reston.va.us (Barry A. Warsaw) and
-tell him what you are doing.
+Gnus is now a @acronym{MIME}-capable reader. This affects many parts of
+Gnus, and adds a slew of new commands. See the manual for details.
@item
-Currently, I get prompted:
+Gnus has also been multilingualized. This also affects too
+many parts of Gnus to summarize here, and adds many new variables.
-decend into sci?
-- type y
-decend into sci.something ?
-- type n
-decend into ucd?
+@item
+@code{gnus-auto-select-first} can now be a function to be
+called to position point.
-The problem above is that since there is really only one subsection of
-science, shouldn't it prompt you for only descending sci.something? If
-there was a sci.somethingelse group or section, then it should prompt
-for sci? first the sci.something? then sci.somethingelse?...
+@item
+The user can now decide which extra headers should be included in
+summary buffers and @acronym{NOV} files.
@item
-Ja, det burde være en måte å si slikt. Kanskje en ny variabel?
-`gnus-use-few-score-files'? SÃ¥ kunne score-regler legges til den
-"mest" lokale score-fila. F. eks. ville no-gruppene betjenes av
-"no.all.SCORE", osv.
+@code{gnus-article-display-hook} has been removed. Instead, a number
+of variables starting with @code{gnus-treat-} have been added.
@item
-What i want is for Gnus to treat any sequence or combination of the following
-as a single spoiler warning and hide it all, replacing it with a "Next Page"
-button:
+The Gnus posting styles have been redone again and now works in a
+subtly different manner.
+@item
+New web-based back ends have been added: @code{nnslashdot},
+@code{nnwarchive} and @code{nnultimate}. nnweb has been revamped,
+again, to keep up with ever-changing layouts.
-^L's
+@item
+Gnus can now read @acronym{IMAP} mail via @code{nnimap}.
-more than n blank lines
+@end itemize
-more than m identical lines
-(which should be replaced with button to show them)
+@node Oort Gnus
+@subsubsection Oort Gnus
+@cindex Oort Gnus
-any whitespace surrounding any of the above
+New features in Gnus 5.10:
+@itemize @bullet
@item
-Well, we could allow a new value to `gnus-thread-ignore-subject' --
-`spaces', or something. (We could even default to that.) And then
-subjects that differ in white space only could be considered the
-"same" subject for threading purposes.
+@kbd{F} (@code{gnus-article-followup-with-original}) and @kbd{R}
+(@code{gnus-article-reply-with-original}) only yank the text in the
+region if the region is active.
@item
-Modes to preprocess the contents (e.g. jka-compr) use the second form
-"(REGEXP FUNCTION NON-NIL)" while ordinary modes (e.g. tex) use the first
-form "(REGEXP . FUNCTION)", so you could use it to distinguish between
-those two types of modes. (auto-modes-alist, insert-file-contents-literally.)
+@code{gnus-group-read-ephemeral-group} can be called interactively,
+using @kbd{G M}.
@item
- Under XEmacs -- do funny article marks:
-tick - thumb tack
-killed - skull
-soup - bowl of soup
-score below - dim light bulb
-score over - bright light bulb
+In draft groups, @kbd{e} is now bound to @code{gnus-draft-edit-message}.
+Use @kbd{B w} for @code{gnus-summary-edit-article} instead.
@item
-Yes. I think the algorithm is as follows:
-
-@example
-Group-mode
-
- show-list-of-articles-in-group
- if (key-pressed == SPACE)
- if (no-more-articles-in-group-to-select)
- if (articles-selected)
- start-reading-selected-articles;
- junk-unread-articles;
- next-group;
- else
- show-next-page;
-
- else if (key-pressed = '.')
- if (consolidated-menus) # same as hide-thread in Gnus
- select-thread-under-cursor;
- else
- select-article-under-cursor;
-
-
-Article-mode
- if (key-pressed == SPACE)
- if (more-pages-in-article)
- next-page;
- else if (more-selected-articles-to-read)
- next-article;
- else
- next-group;
-@end example
+The revised Gnus @acronym{FAQ} is included in the manual,
+@xref{Frequently Asked Questions}.
@item
-My precise need here would have been to limit files to Incoming*.
-One could think of some `nneething-only-files' variable, but I guess
-it would have been unacceptable if one was using many unrelated such
-nneething groups.
+Upgrading from previous (stable) version if you have used Oort.
-A more useful approach would be to, in response to the `G D' prompt, be
-allowed to say something like: `~/.mail/Incoming*', somewhat limiting
-the top-level directory only (in case directories would be matched by
-the wildcard expression).
+If you have tried Oort (the unstable Gnus branch leading to this
+release) but went back to a stable version, be careful when upgrading to
+this version. In particular, you will probably want to remove all
+@file{.marks} (nnml) and @file{.mrk} (nnfolder) files, so that flags are
+read from your @file{.newsrc.eld} instead of from the
+@file{.marks}/@file{.mrk} file where this release store flags. See a
+later entry for more information about marks. Note that downgrading
+isn't save in general.
@item
-It would be nice if it also handled
+Article Buttons
- <URL:news://sunsite.auc.dk/>
+More buttons for URLs, mail addresses, Message-IDs, Info links, man
+pages and Emacs or Gnus related references. @xref{Article Buttons}. The
+variables @code{gnus-button-@var{*}-level} can be used to control the
+appearance of all article buttons. @xref{Article Button Levels}.
-which should correspond to `B nntp RET sunsite.auc.dk' in *Group*.
+@item
+Dired integration
+@code{gnus-dired-minor-mode} (see @ref{Other modes}) installs key
+bindings in dired buffers to send a file as an attachment, open a file
+using the appropriate mailcap entry, and print a file using the mailcap
+entry.
@item
+Gnus can display RSS newsfeeds as a newsgroup. @xref{RSS}.
- Take a look at w3-menu.el in the Emacs-W3 distribution - this works out
-really well. Each menu is 'named' by a symbol that would be on a
-gnus-*-menus (where * would be whatever, but at least group, summary, and
-article versions) variable.
+@item
+Single-part yenc encoded attachments can be decoded.
- So for gnus-summary-menus, I would set to '(sort mark dispose ...)
+@item
+Picons
- A value of '1' would just put _all_ the menus in a single 'GNUS' menu in
-the main menubar. This approach works really well for Emacs-W3 and VM.
+The picons code has been reimplemented to work in GNU Emacs---some of
+the previous options have been removed or renamed.
+Picons are small ``personal icons'' representing users, domain and
+newsgroups, which can be displayed in the Article buffer.
+@xref{Picons}.
@item
- nndoc should take care to create unique Message-IDs for all its
-articles.
-@item
- gnus-score-followup-article only works when you have a summary buffer
-active. Make it work when posting from the group buffer as well.
-(message-sent-hook).
-@item
- rewrite gnus-demon to use run-with-idle-timers.
+If the new option @code{gnus-treat-body-boundary} is non-@code{nil}, a
+boundary line is drawn at the end of the headers.
@item
- * Enhancements to Gnus:
+Retrieval of charters and control messages
- Add two commands:
-
- * gnus-servers (gnus-start-server-buffer?)--enters Gnus and goes
- straight to the server buffer, without opening any connections to
- servers first.
-
- * gnus-server-read-server-newsrc--produces a buffer very similar to
- the group buffer, but with only groups from that server listed;
- quitting this buffer returns to the server buffer.
+There are new commands for fetching newsgroup charters (@kbd{H c}) and
+control messages (@kbd{H C}).
@item
- add a command to check the integrity of an nnfolder folder --
-go through the article numbers and see that there are no duplicates,
-and stuff.
+Delayed articles
-@item
- `unsmileyfy-buffer' to undo smileification.
+You can delay the sending of a message with @kbd{C-c C-j} in the Message
+buffer. The messages are delivered at specified time. This is useful
+for sending yourself reminders. @xref{Delayed Articles}.
@item
- a command to give all relevant info on an article, including all
-secondary marks.
+If @code{auto-compression-mode} is enabled, attachments are automatically
+decompressed when activated.
@item
- when doing `-request-accept-article', the backends should do
-the nnmail duplicate checking.
+If the new option @code{nnml-use-compressed-files} is non-@code{nil},
+the nnml back end allows compressed message files.
@item
- allow `message-signature-file' to be a function to return the
-value of the signature file.
+Signed article headers (X-PGP-Sig) can be verified with @kbd{W p}.
@item
- In addition, I would love it if I could configure message-tab so that it
-could call `bbdb-complete-name' in other headers. So, some sort of
-interface like
+The Summary Buffer uses an arrow in the fringe to indicate the current
+article. Use @code{(setq gnus-summary-display-arrow nil)} to disable it.
-(setq message-tab-alist
- '((message-header-regexp message-expand-group)
- ("^\\(To\\|[cC]c\\|[bB]cc\\)" bbdb-complete-name)))
+@item
+Warn about email replies to news
-then you could run the relevant function to complete the information in
-the header
+Do you often find yourself replying to news by email by mistake? Then
+the new option @code{gnus-confirm-mail-reply-to-news} is just the thing for
+you.
@item
- cache the newsgroups file locally to avoid reloading it all the time.
+If the new option @code{gnus-summary-display-while-building} is
+non-@code{nil}, the summary buffer is shown and updated as it's being
+built.
@item
- a command to import a buffer into a group.
+The new @code{recent} mark @samp{.} indicates newly arrived messages (as
+opposed to old but unread messages).
@item
- nnweb should allow fetching by Message-ID from servers.
+The new option @code{gnus-gcc-mark-as-read} automatically marks
+Gcc articles as read.
@item
- point in the article buffer doesn't always go to the
-beginning of the buffer when selecting new articles.
+The nndoc back end now supports mailman digests and exim bounces.
@item
- a command to process mark all unread articles.
+Gnus supports RFC 2369 mailing list headers, and adds a number of
+related commands in mailing list groups. @xref{Mailing List}.
@item
- `gnus-gather-threads-by-references-and-subject' -- first
-do gathering by references, and then go through the dummy roots and
-do more gathering by subject.
+The Date header can be displayed in a format that can be read aloud
+in English. @xref{Article Date}.
@item
- gnus-uu-mark-in-numerical-order -- process mark articles in
-article numerical order.
+The envelope sender address can be customized when using Sendmail.
+@xref{Mail Variables, Mail Variables,, message, Message Manual}.
@item
- (gnus-thread-total-score
- (gnus-id-to-thread (mail-header-id (gnus-summary-article-header))))
-bind to a key.
+diffs are automatically highlighted in groups matching
+@code{mm-uu-diff-groups-regexp}
@item
- sorting by score is wrong when using sparse threads.
+@acronym{TLS} wrapper shipped with Gnus
-@item
- a command to fetch an arbitrary article -- without having to be
-in the summary buffer.
+@acronym{TLS}/@acronym{SSL} is now supported in @acronym{IMAP} and
+@acronym{NNTP} via @file{tls.el} and GNUTLS. The old
+@acronym{TLS}/@acronym{SSL} support via (external third party)
+@file{ssl.el} and OpenSSL still works.
@item
- a new nncvs backend. Each group would show an article, using
-version branches as threading, checkin date as the date, etc.
+New @file{make.bat} for compiling and installing Gnus under MS Windows
-@item
- http://www.dejanews.com/forms/dnsetfilter_exp.html ?
-This filter allows one to construct advance queries on the Dejanews
-database such as specifying start and end dates, subject, author,
-and/or newsgroup name.
+Use @file{make.bat} if you want to install Gnus under MS Windows, the
+first argument to the batch-program should be the directory where
+@file{xemacs.exe} respectively @file{emacs.exe} is located, iff you want
+to install Gnus after compiling it, give @file{make.bat} @code{/copy} as
+the second parameter.
-@item
- new Date header scoring type -- older, newer
+@file{make.bat} has been rewritten from scratch, it now features
+automatic recognition of XEmacs and GNU Emacs, generates
+@file{gnus-load.el}, checks if errors occur while compilation and
+generation of info files and reports them at the end of the build
+process. It now uses @code{makeinfo} if it is available and falls
+back to @file{infohack.el} otherwise. @file{make.bat} should now
+install all files which are necessary to run Gnus and be generally a
+complete replacement for the @code{configure; make; make install}
+cycle used under Unix systems.
-@item
- use the summary toolbar in the article buffer.
+The new @file{make.bat} makes @file{make-x.bat} superfluous, so it has
+been removed.
@item
- a command to fetch all articles that are less than X days old.
+Support for non-@acronym{ASCII} domain names
-@item
- in pick mode, `q' should save the list of selected articles in the
-group info. The next time the group is selected, these articles
-will automatically get the process mark.
+Message supports non-@acronym{ASCII} domain names in From:, To: and
+Cc: and will query you whether to perform encoding when you try to
+send a message. The variable @code{message-use-idna} controls this.
+Gnus will also decode non-@acronym{ASCII} domain names in From:, To:
+and Cc: when you view a message. The variable @code{gnus-use-idna}
+controls this.
@item
- Isn't it possible to (also?) allow M-^ to automatically try the
-default server if it fails on the current server? (controlled by a
-user variable, (nil, t, 'ask)).
+Better handling of Microsoft citation styles
-@item
- make it possible to cancel articles using the select method for the
-current group.
+Gnus now tries to recognize the mangled header block that some Microsoft
+mailers use to indicate that the rest of the message is a citation, even
+though it is not quoted in any way. The variable
+@code{gnus-cite-unsightly-citation-regexp} matches the start of these
+citations.
@item
- `gnus-summary-select-article-on-entry' or something. It'll default
-to t and will select whatever article decided by `gnus-auto-select-first'.
+@code{gnus-article-skip-boring}
-@item
- a new variable to control which selection commands should be unselecting.
-`first', `best', `next', `prev', `next-unread', `prev-unread' are
-candidates.
+If you set @code{gnus-article-skip-boring} to @code{t}, then Gnus will
+not scroll down to show you a page that contains only boring text,
+which by default means cited text and signature. You can customize
+what is skippable using @code{gnus-article-boring-faces}.
-@item
- be able to select groups that have no articles in them
-to be able to post in them (using the current select method).
+This feature is especially useful if you read many articles that
+consist of a little new content at the top with a long, untrimmed
+message cited below.
@item
- be able to post via DejaNews.
+The format spec @code{%C} for positioning point has changed to @code{%*}.
@item
- `x' should retain any sortings that have been performed.
+The new variable @code{gnus-parameters} can be used to set group parameters.
-@item
- allow the user to specify the precedence of the secondary marks. Also
-allow them to be displayed separately.
+Earlier this was done only via @kbd{G p} (or @kbd{G c}), which stored
+the parameters in @file{~/.newsrc.eld}, but via this variable you can
+enjoy the powers of customize, and simplified backups since you set the
+variable in @file{~/.emacs} instead of @file{~/.newsrc.eld}. The
+variable maps regular expressions matching group names to group
+parameters, a'la:
+@lisp
+(setq gnus-parameters
+ '(("mail\\..*"
+ (gnus-show-threads nil)
+ (gnus-use-scoring nil))
+ ("^nnimap:\\(foo.bar\\)$"
+ (to-group . "\\1"))))
+@end lisp
@item
- gnus-summary-save-in-pipe should concatenate the results from
-the processes when doing a process marked pipe.
+Smileys (@samp{:-)}, @samp{;-)} etc) are now iconized for Emacs too.
-@item
- a new match type, like Followup, but which adds Thread matches on all
-articles that match a certain From header.
+Put @code{(setq gnus-treat-display-smileys nil)} in @file{~/.emacs} to
+disable it.
@item
- a function that can be read from kill-emacs-query-functions to offer
-saving living summary buffers.
+Gnus no longer generate the Sender: header automatically.
-@item
- a function for selecting a particular group which will contain
-the articles listed in a list of article numbers/id's.
+Earlier it was generated iff the user configurable email address was
+different from the Gnus guessed default user address. As the guessing
+algorithm is rarely correct these days, and (more controversially) the
+only use of the Sender: header was to check if you are entitled to
+cancel/supersede news (which is now solved by Cancel Locks instead,
+see another entry), generation of the header has been disabled by
+default. See the variables @code{message-required-headers},
+@code{message-required-news-headers}, and
+@code{message-required-mail-headers}.
@item
- a battery of character translation functions to translate common
-Mac, MS (etc) characters into ISO 8859-1.
+Features from third party @file{message-utils.el} added to @file{message.el}.
-@example
-(defun article-fix-m$word ()
- "Fix M$Word smartquotes in an article."
- (interactive)
- (save-excursion
- (let ((buffer-read-only nil))
- (goto-char (point-min))
- (while (search-forward "\221" nil t)
- (replace-match "`" t t))
- (goto-char (point-min))
- (while (search-forward "\222" nil t)
- (replace-match "'" t t))
- (goto-char (point-min))
- (while (search-forward "\223" nil t)
- (replace-match "\"" t t))
- (goto-char (point-min))
- (while (search-forward "\224" nil t)
- (replace-match "\"" t t)))))
-@end example
+Message now asks if you wish to remove @samp{(was: <old subject>)} from
+subject lines (see @code{message-subject-trailing-was-query}). @kbd{C-c
+M-m} and @kbd{C-c M-f} inserts markers indicating included text.
+@kbd{C-c C-f a} adds a X-No-Archive: header. @kbd{C-c C-f x} inserts
+appropriate headers and a note in the body for cross-postings and
+followups (see the variables @code{message-cross-post-@var{*}}).
@item
-@example
- (add-hook 'gnus-exit-query-functions
-'(lambda ()
- (if (and (file-exists-p nnmail-spool-file)
- (> (nnheader-file-size nnmail-spool-file) 0))
- (yes-or-no-p "New mail has arrived. Quit Gnus anyways? ")
- (y-or-n-p "Are you sure you want to quit Gnus? "))))
-@end example
+References and X-Draft-Headers are no longer generated when you start
+composing messages and @code{message-generate-headers-first} is
+@code{nil}.
@item
- allow message-default-headers to be a function.
+Improved anti-spam features.
-@item
- new Date score match types -- < > = (etc) that take floating point
-numbers and match on the age of the article.
+Gnus is now able to take out spam from your mail and news streams
+using a wide variety of programs and filter rules. Among the supported
+methods are RBL blocklists, bogofilter and white/blacklists. Hooks
+for easy use of external packages such as SpamAssassin and Hashcash
+are also new. @xref{Thwarting Email Spam}.
@item
-@example
-> > > If so, I've got one gripe: It seems that when I fire up gnus 5.2.25
-> > > under xemacs-19.14, it's creating a new frame, but is erasing the
-> > > buffer in the frame that it was called from =:-O
->
-> > Hm. How do you start up Gnus? From the toolbar or with
-> > `M-x gnus-other-frame'?
->
-> I normally start it up from the toolbar; at
-> least that's the way I've caught it doing the
-> deed before.
-@end example
+Easy inclusion of X-Faces headers.
@item
- all commands that react to the process mark should push
-the current process mark set onto the stack.
+Face headers handling.
@item
- gnus-article-hide-pgp
-Selv ville jeg nok ha valgt å slette den dersom teksten matcher
-@example
-"\\(This\s+\\)?[^ ]+ has been automatically signed by"
-@end example
-og det er maks hundre tegn mellom match-end og ----linja. Men -det-
-er min type heuristikk og langt fra alles.
+In the summary buffer, the new command @kbd{/ N} inserts new messages
+and @kbd{/ o} inserts old messages.
@item
- `gnus-subscribe-sorted' -- insert new groups where they would have been
-sorted to if `gnus-group-sort-function' were run.
+Gnus decodes morse encoded messages if you press @kbd{W m}.
@item
- gnus-(group,summary)-highlight should respect any `face' text props set
-on the lines.
+Unread count correct in nnimap groups.
-@item
- use run-with-idle-timer for gnus-demon instead of the
-home-brewed stuff for better reliability.
+The estimated number of unread articles in the group buffer should now
+be correct for nnimap groups. This is achieved by calling
+@code{nnimap-fixup-unread-after-getting-new-news} from the
+@code{gnus-setup-news-hook} (called on startup) and
+@code{gnus-after-getting-new-news-hook}. (called after getting new
+mail). If you have modified those variables from the default, you may
+want to add @code{nnimap-fixup-unread-after-getting-new-news} again. If
+you were happy with the estimate and want to save some (minimal) time
+when getting new mail, remove the function.
@item
- add a way to select which NoCeM type to apply -- spam, troll, etc.
+Group Carbon Copy (GCC) quoting
-@item
- nndraft-request-group should tally auto-save files.
+To support groups that contains SPC and other weird characters, groups
+are quoted before they are placed in the Gcc: header. This means
+variables such as @code{gnus-message-archive-group} should no longer
+contain quote characters to make groups containing SPC work. Also, if
+you are using the string @samp{nnml:foo, nnml:bar} (indicating Gcc
+into two groups) you must change it to return the list
+@code{("nnml:foo" "nnml:bar")}, otherwise the Gcc: line will be quoted
+incorrectly. Note that returning the string @samp{nnml:foo, nnml:bar}
+was incorrect earlier, it just didn't generate any problems since it
+was inserted directly.
@item
- implement nntp-retry-on-break and nntp-command-timeout.
+@file{~/News/overview/} not used.
-@item
- gnus-article-highlight-limit that says when not to highlight (long)
-articles.
+As a result of the following change, the @file{~/News/overview/}
+directory is not used any more. You can safely delete the entire
+hierarchy.
@item
- (nnoo-set SERVER VARIABLE VALUE)
+@code{gnus-agent}
-@item
- nn*-spool-methods
+The Gnus Agent has seen a major updated and is now enabled by default,
+and all nntp and nnimap servers from @code{gnus-select-method} and
+@code{gnus-secondary-select-method} are agentized by default. Earlier
+only the server in @code{gnus-select-method} was agentized by the
+default, and the agent was disabled by default. When the agent is
+enabled, headers are now also retrieved from the Agent cache instead
+of the back ends when possible. Earlier this only happened in the
+unplugged state. You can enroll or remove servers with @kbd{J a} and
+@kbd{J r} in the server buffer. Gnus will not download articles into
+the Agent cache, unless you instruct it to do so, though, by using
+@kbd{J u} or @kbd{J s} from the Group buffer. You revert to the old
+behaviour of having the Agent disabled with @code{(setq gnus-agent
+nil)}. Note that putting @code{(gnus-agentize)} in @file{~/.gnus.el}
+is not needed any more.
@item
- interrupitng agent fetching of articles should save articles.
+@code{gnus-summary-line-format}
-@item
- command to open a digest group, and copy all the articles there to the
-current group.
+The default value changed to @samp{%U%R%z%I%(%[%4L: %-23,23f%]%)
+%s\n}. Moreover @code{gnus-extra-headers},
+@code{nnmail-extra-headers} and @code{gnus-ignored-from-addresses}
+changed their default so that the users name will be replaced by the
+recipient's name or the group name posting to for @acronym{NNTP}
+groups.
@item
- a variable to disable article body highlights if there's more than
-X characters in the body.
+@file{deuglify.el} (@code{gnus-article-outlook-deuglify-article})
-@item
- handle 480/381 authinfo requests separately.
+A new file from Raymond Scholz @email{rscholz@@zonix.de} for deuglifying
+broken Outlook (Express) articles.
@item
- include the texi/dir file in the distribution.
+@code{(require 'gnus-load)}
-@item
- format spec to "tab" to a position.
+If you use a stand-alone Gnus distribution, you'd better add
+@code{(require 'gnus-load)} into your @file{~/.emacs} after adding the Gnus
+lisp directory into load-path.
-@item
- Move all prompting to the new `M-n' default style.
+File @file{gnus-load.el} contains autoload commands, functions and variables,
+some of which may not be included in distributions of Emacsen.
@item
- command to display all dormant articles.
+@code{gnus-slave-unplugged}
-@item
- gnus-auto-select-next makeover -- list of things it should do.
+A new command which starts Gnus offline in slave mode.
@item
- a score match type that adds scores matching on From if From has replied
-to something someone else has said.
+@code{message-insinuate-rmail}
-@item
- Read Netscape discussion groups:
-snews://secnews.netscape.com/netscape.communicator.unix
+Adding @code{(message-insinuate-rmail)} and @code{(setq
+mail-user-agent 'gnus-user-agent)} in @file{.emacs} convinces Rmail to
+compose, reply and forward messages in message-mode, where you can
+enjoy the power of @acronym{MML}.
@item
-One command to edit the original version if an article, and one to edit
-the displayed version.
+@code{message-minibuffer-local-map}
-@item
-@kbd{T v} -- make all process-marked articles the children of the
-current article.
+The line below enables BBDB in resending a message:
+@lisp
+(define-key message-minibuffer-local-map [(tab)]
+ 'bbdb-complete-name)
+@end lisp
@item
-Switch from initial text to the new default text mechanism.
+Externalizing and deleting of attachments.
-@item
-How about making it possible to expire local articles? Will it be
-possible to make various constraints on when an article can be
-expired, e.g. (read), (age > 14 days), or the more interesting (read
-& age > 14 days)?
+If @code{gnus-gcc-externalize-attachments} or
+@code{message-fcc-externalize-attachments} is non-@code{nil}, attach
+local files as external parts.
-@item
-New limit command---limit to articles that have a certain string
-in the head or body.
+The command @code{gnus-mime-save-part-and-strip} (bound to @kbd{C-o}
+on @acronym{MIME} buttons) saves a part and replaces the part with an
+external one. @code{gnus-mime-delete-part} (bound to @kbd{d} on
+@acronym{MIME} buttons) removes a part. It works only on back ends
+that support editing.
@item
-Allow breaking lengthy NNTP commands.
+@code{gnus-default-charset}
-@item
-gnus-article-highlight-limit, to disable highlighting in big articles.
+The default value is determined from the
+@code{current-language-environment} variable, instead of
+@code{iso-8859-1}. Also the @samp{.*} item in
+@code{gnus-group-charset-alist} is removed.
@item
-Editing an article should put the article to be edited
-in a special, unique buffer.
+@code{gnus-posting-styles}
-@item
-A command to send a mail to the admin-address group param.
+Add a new format of match like
+@lisp
+((header "to" "larsi.*org")
+ (Organization "Somewhere, Inc."))
+@end lisp
+The old format like the lines below is obsolete, but still accepted.
+@lisp
+(header "to" "larsi.*org"
+ (Organization "Somewhere, Inc."))
+@end lisp
@item
-A Date scoring type that will match if the article
-is less than a certain number of days old.
+@code{message-ignored-news-headers} and @code{message-ignored-mail-headers}
-@item
-New spec: %~(tab 56) to put point on column 56
+@samp{X-Draft-From} and @samp{X-Gnus-Agent-Meta-Information} have been
+added into these two variables. If you customized those, perhaps you
+need add those two headers too.
@item
-Allow Gnus Agent scoring to use normal score files.
+Gnus reads the @acronym{NOV} and articles in the Agent if plugged.
-@item
-Rething the Agent active file thing. `M-g' doesn't update the active
-file, for instance.
+If one reads an article while plugged, and the article already exists
+in the Agent, it won't get downloaded once more. @code{(setq
+gnus-agent-cache nil)} reverts to the old behavior.
@item
-With dummy roots, `^' and then selecing the first article
-in any other dummy thread will make Gnus highlight the
-dummy root instead of the first article.
+Gnus supports the ``format=flowed'' (RFC 2646) parameter. On
+composing messages, it is enabled by @code{use-hard-newlines}.
+Decoding format=flowed was present but not documented in earlier
+versions.
@item
-Propagate all group properties (marks, article numbers, etc) up to the
-topics for displaying.
+Gnus supports the generation of RFC 2298 Disposition Notification requests.
-@item
-`n' in the group buffer with topics should go to the next group
-with unread articles, even if that group is hidden in a topic.
+This is invoked with the @kbd{C-c M-n} key binding from message mode.
@item
-gnus-posting-styles doesn't work in drafts.
+Gnus supports Maildir groups.
+
+Gnus includes a new back end @file{nnmaildir.el}. @xref{Maildir}.
@item
-gnus-summary-limit-include-cached is slow when there are
-many articles in the cache, since it regenerates big parts of the
-summary buffer for each article.
+Printing capabilities are enhanced.
+
+Gnus supports Muttprint natively with @kbd{O P} from the Summary and
+Article buffers. Also, each individual @acronym{MIME} part can be
+printed using @kbd{p} on the @acronym{MIME} button.
@item
-Implement gnus-batch-brew-soup.
+Message supports the Importance: (RFC 2156) header.
+
+In the message buffer, @kbd{C-c C-f C-i} or @kbd{C-c C-u} cycles through
+the valid values.
@item
-Group parameters and summary commands for un/subscribing to mailing
-lists.
+Gnus supports Cancel Locks in News.
+
+This means a header @samp{Cancel-Lock} is inserted in news posting. It is
+used to determine if you wrote an article or not (for canceling and
+superseding). Gnus generates a random password string the first time
+you post a message, and saves it in your @file{~/.emacs} using the Custom
+system. While the variable is called @code{canlock-password}, it is not
+security sensitive data. Publishing your canlock string on the web
+will not allow anyone to be able to anything she could not already do.
+The behaviour can be changed by customizing @code{message-insert-canlock}.
@item
-Introduce nnmail-home-directory.
+Gnus supports server-side mail filtering using Sieve.
+
+Sieve rules can be added as Group Parameters for groups, and the
+complete Sieve script is generated using @kbd{D g} from the Group
+buffer, and then uploaded to the server using @kbd{C-c C-l} in the
+generated Sieve buffer. @xref{Sieve Commands}, and the new Sieve
+manual @ref{Top, , Top, sieve, Emacs Sieve}.
@item
-gnus-fetch-group and friends should exit Gnus when the user
-exits the group.
+Extended format specs.
+
+Format spec @samp{%&user-date;} is added into
+@code{gnus-summary-line-format-alist}. Also, user defined extended
+format specs are supported. The extended format specs look like
+@samp{%u&foo;}, which invokes function
+@code{gnus-user-format-function-@var{foo}}. Because @samp{&} is used as the
+escape character, old user defined format @samp{%u&} is no longer supported.
@item
-The jingle is only played on the second invocation of Gnus.
+@kbd{/ *} (@code{gnus-summary-limit-include-cached}) is rewritten.
+
+It was aliased to @kbd{Y c}
+(@code{gnus-summary-insert-cached-articles}). The new function filters
+out other articles.
+
+@item Some limiting commands accept a @kbd{C-u} prefix to negate the match.
+
+If @kbd{C-u} is used on subject, author or extra headers, i.e., @kbd{/
+s}, @kbd{/ a}, and @kbd{/ x}
+(@code{gnus-summary-limit-to-@{subject,author,extra@}}) respectively, the
+result will be to display all articles that do not match the expression.
@item
-Bouncing articles should do MIME.
+Group names are treated as UTF-8 by default.
+
+This is supposedly what USEFOR wanted to migrate to. See
+@code{gnus-group-name-charset-group-alist} and
+@code{gnus-group-name-charset-method-alist} for customization.
@item
-Crossposted articles should "inherit" the % or @ mark from the other
-groups it has been crossposted to, or something. (Agent.)
+The nnml and nnfolder back ends store marks for each groups.
+
+This makes it possible to take backup of nnml/nnfolder servers/groups
+separately of @file{~/.newsrc.eld}, while preserving marks. It also
+makes it possible to share articles and marks between users (without
+sharing the @file{~/.newsrc.eld} file) within e.g. a department. It
+works by storing the marks stored in @file{~/.newsrc.eld} in a per-group
+file @file{.marks} (for nnml) and @file{@var{groupname}.mrk} (for
+nnfolder, named @var{groupname}). If the nnml/nnfolder is moved to
+another machine, Gnus will automatically use the @file{.marks} or
+@file{.mrk} file instead of the information in @file{~/.newsrc.eld}.
+The new server variables @code{nnml-marks-is-evil} and
+@code{nnfolder-marks-is-evil} can be used to disable this feature.
@item
-`S D r' should allow expansion of aliases.
+The menu bar item (in Group and Summary buffer) named ``Misc'' has
+been renamed to ``Gnus''.
@item
-If point is on a group that appears multiple times in topics, and
-you press `l', point will move to the first instance of the group.
+The menu bar item (in Message mode) named ``@acronym{MML}'' has been
+renamed to ``Attachments''. Note that this menu also contains security
+related stuff, like signing and encryption (@pxref{Security, Security,,
+message, Message Manual}).
@item
-The documentation should mention pop3.el, fetchmail, smtpmail and why
-po:username often fails.
+@code{gnus-group-charset-alist} and
+@code{gnus-group-ignored-charsets-alist}.
+
+The regexps in these variables are compared with full group names
+instead of real group names in 5.8. Users who customize these
+variables should change those regexps accordingly. For example:
+@lisp
+("^han\\>" euc-kr) -> ("\\(^\\|:\\)han\\>" euc-kr)
+@end lisp
@item
-Fetch by Message-ID from dejanews.
+Gnus supports @acronym{PGP} (RFC 1991/2440), @acronym{PGP/MIME} (RFC
+2015/3156) and @acronym{S/MIME} (RFC 2630-2633).
-<URL:http://search.dejanews.com/msgid.xp?MID=%3C62h9l9$hm4@@basement.replay.com%3E&fmt=raw>
+It needs an external @acronym{S/MIME} and OpenPGP implementation, but no
+additional Lisp libraries. This add several menu items to the
+Attachments menu, and @kbd{C-c RET} key bindings, when composing
+messages. This also obsoletes @code{gnus-article-hide-pgp-hook}.
@item
-A spec for the group line format to display the number of
-agent-downloaded articles in the group.
+Gnus inlines external parts (message/external).
@item
-Some nntp servers never respond when posting, so there should be a
-timeout for all commands.
+@acronym{MML} (Mime compose) prefix changed from @kbd{M-m} to @kbd{C-c
+C-m}.
+
+This change was made to avoid conflict with the standard binding of
+@code{back-to-indentation}, which is also useful in message mode.
@item
-Solve the halting problem.
+The default for @code{message-forward-show-mml} changed to symbol @code{best}.
-@c TODO
+The behaviour for the @code{best} value is to show @acronym{MML} (i.e.,
+convert to @acronym{MIME}) when appropriate. @acronym{MML} will not be
+used when forwarding signed or encrypted messages, as the conversion
+invalidate the digital signature.
@end itemize
+@node No Gnus
+@subsubsection No Gnus
+@cindex No Gnus
+
+New features in No Gnus:
+@c FIXME: Gnus 5.12?
+
+@include gnus-news.texi
+
@iftex
@page
@end iftex
+@node On Writing Manuals
+@section On Writing Manuals
+
+I guess most manuals are written after-the-fact; documenting a program
+that's already there. This is not how this manual is written. When
+implementing something, I write the manual entry for that something
+straight away. I then see that it's difficult to explain the
+functionality, so I write how it's supposed to be, and then I change the
+implementation. Writing the documentation and writing the code goes
+hand in hand.
+
+This, of course, means that this manual has no, or little, flow. It
+documents absolutely everything in Gnus, but often not where you're
+looking for it. It is a reference manual, and not a guide to how to get
+started with Gnus.
+
+That would be a totally different book, that should be written using the
+reference manual as source material. It would look quite differently.
+
+
@page
@node Terminology
@section Terminology
@item news
@cindex news
This is what you are supposed to use this thing for---reading news.
-News is generally fetched from a nearby @sc{nntp} server, and is
+News is generally fetched from a nearby @acronym{NNTP} server, and is
generally publicly available to everybody. If you post news, the entire
world is likely to read just what you have written, and they'll all
snigger mischievously. Behind your back.
Post an article to the current newsgroup responding to the article you
are reading.
-@item backend
-@cindex backend
-Gnus gets fed articles from a number of backends, both news and mail
-backends. Gnus does not handle the underlying media, so to speak---this
-is all done by the backends.
+@item back end
+@cindex back end
+Gnus considers mail and news to be mostly the same, really. The only
+difference is how to access the actual articles. News articles are
+commonly fetched via the protocol @acronym{NNTP}, whereas mail
+messages could be read from a file on the local disk. The internal
+architecture of Gnus thus comprises a ``front end'' and a number of
+``back ends''. Internally, when you enter a group (by hitting
+@key{RET}, say), you thereby invoke a function in the front end in
+Gnus. The front end then ``talks'' to a back end and says things like
+``Give me the list of articles in the foo group'' or ``Show me article
+number 4711''.
+
+So a back end mainly defines either a protocol (the @code{nntp} back
+end accesses news via @acronym{NNTP}, the @code{nnimap} back end
+accesses mail via @acronym{IMAP}) or a file format and directory
+layout (the @code{nnspool} back end accesses news via the common
+``spool directory'' format, the @code{nnml} back end access mail via a
+file format and directory layout that's quite similar).
+
+Gnus does not handle the underlying media, so to speak---this is all
+done by the back ends. A back end is a collection of functions to
+access the articles.
+
+However, sometimes the term ``back end'' is also used where ``server''
+would have been more appropriate. And then there is the term ``select
+method'' which can mean either. The Gnus terminology can be quite
+confusing.
@item native
@cindex native
-Gnus will always use one method (and backend) as the @dfn{native}, or
+Gnus will always use one method (and back end) as the @dfn{native}, or
default, way of getting news.
@item foreign
@cindex foreign
You can also have any number of foreign groups active at the same time.
-These are groups that use non-native non-secondary backends for getting
+These are groups that use non-native non-secondary back ends for getting
news.
@item secondary
@cindex secondary
-Secondary backends are somewhere half-way between being native and being
+Secondary back ends are somewhere half-way between being native and being
foreign, but they mostly act like they are native.
@item article
@item headers
@cindex headers
A collection of such lines, or a collection of heads. Or even a
-collection of @sc{nov} lines.
+collection of @acronym{NOV} lines.
-@item @sc{nov}
-@cindex nov
-When Gnus enters a group, it asks the backend for the headers of all
+@item @acronym{NOV}
+@cindex @acronym{NOV}
+When Gnus enters a group, it asks the back end for the headers of all
unread articles in the group. Most servers support the News OverView
format, which is more compact and much faster to read and parse than the
normal @sc{head} format.
@item select method
@cindex select method
-A structure that specifies the backend, the server and the virtual
+A structure that specifies the back end, the server and the virtual
server settings.
@item virtual server
@item ephemeral groups
@cindex ephemeral groups
+@cindex temporary groups
Most groups store data on what articles you have read. @dfn{Ephemeral}
groups are groups that will have no data stored---when you exit the
group, it'll disappear into the aether.
@item digest
@cindex digest
A collection of messages in one file. The most common digest format is
-specified by RFC1153.
+specified by RFC 1153.
+
+@item splitting
+@cindex splitting, terminolgy
+@cindex mail sorting
+@cindex mail filtering (splitting)
+The action of sorting your emails according to certain rules. Sometimes
+incorrectly called mail filtering.
@end table
for some quite common situations.
@menu
-* Slow/Expensive Connection:: You run a local Emacs and get the news elsewhere.
-* Slow Terminal Connection:: You run a remote Emacs.
-* Little Disk Space:: You feel that having large setup files is icky.
-* Slow Machine:: You feel like buying a faster machine.
+* Slow/Expensive Connection:: You run a local Emacs and get the news elsewhere.
+* Slow Terminal Connection:: You run a remote Emacs.
+* Little Disk Space:: You feel that having large setup files is icky.
+* Slow Machine:: You feel like buying a faster machine.
@end menu
@node Slow/Expensive Connection
-@subsection Slow/Expensive @sc{nntp} Connection
+@subsection Slow/Expensive NNTP Connection
If you run Emacs on a machine locally, and get your news from a machine
over some very thin strings, you want to cut down on the amount of data
-Gnus has to get from the @sc{nntp} server.
+Gnus has to get from the @acronym{NNTP} server.
@table @code
@item gnus-nov-is-evil
This one has to be @code{nil}. If not, grabbing article headers from
-the @sc{nntp} server will not be very fast. Not all @sc{nntp} servers
+the @acronym{NNTP} server will not be very fast. Not all @acronym{NNTP} servers
support @sc{xover}; Gnus will detect this by itself.
@end table
If this is non-@code{nil}, all threads in the summary buffer will be
hidden initially.
+
@item gnus-updated-mode-lines
If this is @code{nil}, Gnus will not put information in the buffer mode
lines, which might save some time.
use any other newsreaders than Gnus. This variable is @code{t} by
default.
+@item gnus-read-newsrc-file
+If this is @code{nil}, Gnus will never read @file{.newsrc}---it will
+only read @file{.newsrc.eld}. This means that you will not be able to
+use any other newsreaders than Gnus. This variable is @code{t} by
+default.
+
@item gnus-save-killed-list
If this is @code{nil}, Gnus will not save the list of dead groups. You
should also set @code{gnus-check-new-newsgroups} to @code{ask-server}
@code{gnus-nov-is-evil} to @code{nil} to make entering and exiting the
summary buffer faster.
+Gnus uses the internal ELisp-based @code{uncompface} program for
+decoding an @code{X-Face} header normally in Emacs. If you feel it is
+slow, set @code{uncompface-use-external} to @code{t}. @xref{X-Face}.
+
@page
@node Troubleshooting
@item
Try doing an @kbd{M-x gnus-version}. If you get something that looks
-like @samp{Gnus v5.46; nntp 4.0} you have the right files loaded. If,
-on the other hand, you get something like @samp{NNTP 3.x} or @samp{nntp
-flee}, you have some old @file{.el} files lying around. Delete these.
+like @samp{T-gnus 6.17.* (based on Gnus v5.10.*; for SEMI 1.1*, FLIM
+1.1*)} you have the right files loaded. Otherwise you have some old
+@file{.el} files lying around. Delete these.
@item
-Read the help group (@kbd{G h} in the group buffer) for a FAQ and a
-how-to.
+Read the help group (@kbd{G h} in the group buffer) for a
+@acronym{FAQ} and a how-to.
@item
@vindex max-lisp-eval-depth
@kindex M-x gnus-bug
@findex gnus-bug
If you find a bug in Gnus, you can report it with the @kbd{M-x gnus-bug}
-command. @kbd{M-x set-variable RET debug-on-error RET t RET}, and send
+command. @kbd{M-x set-variable RET debug-on-error RET t RET}, and send
me the backtrace. I will fix bugs, but I can only fix them if you send
me a precise description as to how to reproduce the bug.
it somewhere it can be reached, and include the URL of the picture in
the bug report.
-If you just need help, you are better off asking on
-@samp{gnu.emacs.gnus}. I'm not very helpful.
+@cindex patches
+If you would like to contribute a patch to fix bugs or make
+improvements, please produce the patch using @samp{diff -u}.
+
+@cindex edebug
+If you want to debug your problem further before reporting, possibly
+in order to solve the problem yourself and send a patch, you can use
+edebug. Debugging Lisp code is documented in the Elisp manual
+(@pxref{Debugging, , Debugging Lisp Programs, elisp, The GNU Emacs
+Lisp Reference Manual}). To get you started with edebug, consider if
+you discover some weird behaviour when pressing @kbd{c}, the first
+step is to do @kbd{C-h k c} and click on the hyperlink (Emacs only) in
+the documentation buffer that leads you to the function definition,
+then press @kbd{M-x edebug-defun RET} with point inside that function,
+return to Gnus and press @kbd{c} to invoke the code. You will be
+placed in the lisp buffer and can single step using @kbd{SPC} and
+evaluate expressions using @kbd{M-:} or inspect variables using
+@kbd{C-h v}, abort execution with @kbd{q}, and resume execution with
+@kbd{c} or @kbd{g}.
+
+@cindex elp
+@cindex profile
+@cindex slow
+Sometimes, a problem do not directly generate an elisp error but
+manifests itself by causing Gnus to be very slow. In these cases, you
+can use @kbd{M-x toggle-debug-on-quit} and press @kbd{C-g} when things are
+slow, and then try to analyze the backtrace (repeating the procedure
+helps isolating the real problem areas).
+
+A fancier approach is to use the elisp profiler, ELP. The profiler is
+(or should be) fully documented elsewhere, but to get you started
+there are a few steps that need to be followed. First, instrument the
+part of Gnus you are interested in for profiling, e.g. @kbd{M-x
+elp-instrument-package RET gnus} or @kbd{M-x elp-instrument-package
+RET message}. Then perform the operation that is slow and press
+@kbd{M-x elp-results}. You will then see which operations that takes
+time, and can debug them further. If the entire operation takes much
+longer than the time spent in the slowest function in the profiler
+output, you probably profiled the wrong part of Gnus. To reset
+profiling statistics, use @kbd{M-x elp-reset-all}. @kbd{M-x
+elp-restore-all} is supposed to remove profiling, but given the
+complexities and dynamic code generation in Gnus, it might not always
+work perfectly.
@cindex gnu.emacs.gnus
@cindex ding mailing list
-You can also ask on the ding mailing list---@samp{ding@@gnus.org}.
-Write to @samp{ding-request@@gnus.org} to subscribe.
+If you just need help, you are better off asking on
+@samp{gnu.emacs.gnus}. I'm not very helpful. You can also ask on
+@email{ding@@gnus.org, the ding mailing list}. Write to
+@email{ding-request@@gnus.org} to subscribe.
@page
You can never expect the internals of a program not to change, but I
will be defining (in some details) the interface between Gnus and its
-backends (this is written in stone), the format of the score files
+back ends (this is written in stone), the format of the score files
(ditto), data structures (some are less likely to change than others)
and general methods of operation.
@menu
-* Gnus Utility Functions:: Common functions and variable to use.
-* Backend Interface:: How Gnus communicates with the servers.
-* Score File Syntax:: A BNF definition of the score file standard.
-* Headers:: How Gnus stores headers internally.
-* Ranges:: A handy format for storing mucho numbers.
-* Group Info:: The group info format.
-* Extended Interactive:: Symbolic prefixes and stuff.
-* Emacs/XEmacs Code:: Gnus can be run under all modern Emacsen.
-* Various File Formats:: Formats of files that Gnus use.
+* Gnus Utility Functions:: Common functions and variable to use.
+* Back End Interface:: How Gnus communicates with the servers.
+* Score File Syntax:: A BNF definition of the score file standard.
+* Headers:: How Gnus stores headers internally.
+* Ranges:: A handy format for storing mucho numbers.
+* Group Info:: The group info format.
+* Extended Interactive:: Symbolic prefixes and stuff.
+* Emacs/XEmacs Code:: Gnus can be run under all modern Emacsen.
+* Various File Formats:: Formats of files that Gnus use.
@end menu
@item gnus-news-group-p
@findex gnus-news-group-p
-Says whether @var{group} came from a news backend.
+Says whether @var{group} came from a news back end.
@item gnus-ephemeral-group-p
@findex gnus-ephemeral-group-p
@findex gnus-group-foreign-p
Says whether @var{group} is foreign or not.
-@item group-group-find-parameter
-@findex group-group-find-parameter
+@item gnus-group-find-parameter
+@findex gnus-group-find-parameter
Returns the parameter list of @var{group}. If given a second parameter,
returns the value of that parameter for @var{group}.
@item gnus-check-backend-function
@findex gnus-check-backend-function
-Takes two parameters, @var{function} and @var{group}. If the backend
+Takes two parameters, @var{function} and @var{group}. If the back end
@var{group} comes from supports @var{function}, return non-@code{nil}.
@lisp
@end table
-@node Backend Interface
-@subsection Backend Interface
+@node Back End Interface
+@subsection Back End Interface
-Gnus doesn't know anything about @sc{nntp}, spools, mail or virtual
+Gnus doesn't know anything about @acronym{NNTP}, spools, mail or virtual
groups. It only knows how to talk to @dfn{virtual servers}. A virtual
-server is a @dfn{backend} and some @dfn{backend variables}. As examples
+server is a @dfn{back end} and some @dfn{back end variables}. As examples
of the first, we have @code{nntp}, @code{nnspool} and @code{nnmbox}. As
examples of the latter we have @code{nntp-port-number} and
@code{nnmbox-directory}.
-When Gnus asks for information from a backend---say @code{nntp}---on
+When Gnus asks for information from a back end---say @code{nntp}---on
something, it will normally include a virtual server name in the
-function parameters. (If not, the backend should use the ``current''
+function parameters. (If not, the back end should use the ``current''
virtual server.) For instance, @code{nntp-request-list} takes a virtual
server as its only (optional) parameter. If this virtual server hasn't
been opened, the function should fail.
Here the virtual server name is @samp{odd-one} while the name of
the physical server is @samp{ifi.uio.no}.
-The backends should be able to switch between several virtual servers.
-The standard backends implement this by keeping an alist of virtual
+The back ends should be able to switch between several virtual servers.
+The standard back ends implement this by keeping an alist of virtual
server environments that they pull down/push up when needed.
There are two groups of interface functions: @dfn{required functions},
the function call. Functions that fail should return @code{nil} as the
return value.
-Some backends could be said to be @dfn{server-forming} backends, and
-some might be said not to be. The latter are backends that generally
+Some back ends could be said to be @dfn{server-forming} back ends, and
+some might be said not to be. The latter are back ends that generally
only operate on one group at a time, and have no concept of ``server''
--- they have a group, and they deliver info on that group and nothing
+---they have a group, and they deliver info on that group and nothing
more.
-In the examples and definitions I will refer to the imaginary backend
+Gnus identifies each message by way of group name and article number. A
+few remarks about these article numbers might be useful. First of all,
+the numbers are positive integers. Secondly, it is normally not
+possible for later articles to ``re-use'' older article numbers without
+confusing Gnus. That is, if a group has ever contained a message
+numbered 42, then no other message may get that number, or Gnus will get
+mightily confused.@footnote{See the function
+@code{nnchoke-request-update-info}, @ref{Optional Back End Functions}.}
+Third, article numbers must be assigned in order of arrival in the
+group; this is not necessarily the same as the date of the message.
+
+The previous paragraph already mentions all the ``hard'' restrictions that
+article numbers must fulfill. But it seems that it might be useful to
+assign @emph{consecutive} article numbers, for Gnus gets quite confused
+if there are holes in the article numbering sequence. However, due to
+the ``no-reuse'' restriction, holes cannot be avoided altogether. It's
+also useful for the article numbers to start at 1 to avoid running out
+of numbers as long as possible.
+
+Note that by convention, back ends are named @code{nnsomething}, but
+Gnus also comes with some @code{nnnotbackends}, such as
+@file{nnheader.el}, @file{nnmail.el} and @file{nnoo.el}.
+
+In the examples and definitions I will refer to the imaginary back end
@code{nnchoke}.
@cindex @code{nnchoke}
@menu
-* Required Backend Functions:: Functions that must be implemented.
-* Optional Backend Functions:: Functions that need not be implemented.
-* Error Messaging:: How to get messages and report errors.
-* Writing New Backends:: Extending old backends.
-* Hooking New Backends Into Gnus:: What has to be done on the Gnus end.
-* Mail-like Backends:: Some tips on mail backends.
+* Required Back End Functions:: Functions that must be implemented.
+* Optional Back End Functions:: Functions that need not be implemented.
+* Error Messaging:: How to get messages and report errors.
+* Writing New Back Ends:: Extending old back ends.
+* Hooking New Back Ends Into Gnus:: What has to be done on the Gnus end.
+* Mail-like Back Ends:: Some tips on mail back ends.
@end menu
-@node Required Backend Functions
-@subsubsection Required Backend Functions
+@node Required Back End Functions
+@subsubsection Required Back End Functions
@table @code
@item (nnchoke-retrieve-headers ARTICLES &optional GROUP SERVER FETCH-OLD)
@var{articles} is either a range of article numbers or a list of
-@code{Message-ID}s. Current backends do not fully support either---only
-sequences (lists) of article numbers, and most backends do not support
+@code{Message-ID}s. Current back ends do not fully support either---only
+sequences (lists) of article numbers, and most back ends do not support
retrieval of @code{Message-ID}s. But they should try for both.
-The result data should either be HEADs or NOV lines, and the result
+The result data should either be HEADs or @acronym{NOV} lines, and the result
value should either be @code{headers} or @code{nov} to reflect this.
This might later be expanded to @code{various}, which will be a mixture
-of HEADs and NOV lines, but this is currently not supported by Gnus.
+of HEADs and @acronym{NOV} lines, but this is currently not supported by Gnus.
-If @var{fetch-old} is non-@code{nil} it says to try fetching "extra
-headers", in some meaning of the word. This is generally done by
+If @var{fetch-old} is non-@code{nil} it says to try fetching ``extra
+headers'', in some meaning of the word. This is generally done by
fetching (at most) @var{fetch-old} extra headers less than the smallest
article number in @code{articles}, and filling the gaps as well. The
-presence of this parameter can be ignored if the backend finds it
+presence of this parameter can be ignored if the back end finds it
cumbersome to follow the request. If this is non-@code{nil} and not a
number, do maximum fetches.
header = <text> eol
@end example
+@cindex BNF
+(The version of BNF used here is the one used in RFC822.)
+
If the return value is @code{nov}, the data buffer should contain
@dfn{network overview database} lines. These are basically fields
separated by tabs.
@example
nov-buffer = *nov-line
-nov-line = 8*9 [ field <TAB> ] eol
+nov-line = field 7*8[ <TAB> field ] eol
field = <text except TAB>
@end example
@var{server} is here the virtual server name. @var{definitions} is a
list of @code{(VARIABLE VALUE)} pairs that define this virtual server.
-If the server can't be opened, no error should be signaled. The backend
+If the server can't be opened, no error should be signaled. The back end
may then choose to refuse further attempts at connecting to this
server. In fact, it should do so.
@item (nnchoke-request-close)
-Close connection to all servers and free all resources that the backend
-have reserved. All buffers that have been created by that backend
+Close connection to all servers and free all resources that the back end
+have reserved. All buffers that have been created by that back end
should be killed. (Not the @code{nntp-server-buffer}, though.) This
function is generally only called when Gnus is shutting down.
If @var{server} is the current virtual server, and the connection to the
physical server is alive, then this function should return a
-non-@code{nil} vlue. This function should under no circumstances
+non-@code{nil} value. This function should under no circumstances
attempt to reconnect to a server we have lost connection to.
There should be no data returned.
Get data on @var{group}. This function also has the side effect of
making @var{group} the current group.
-If @var{FAST}, don't bother to return useful data, just make @var{group}
+If @var{fast}, don't bother to return useful data, just make @var{group}
the current group.
Here's an example of some result data and a definition of the same:
considering the highest and lowest article numbers, but some articles
may have been canceled. Gnus just discards the total-number, so
whether one should take the bother to generate it properly (if that is a
-problem) is left as an exercise to the reader.
+problem) is left as an exercise to the reader. If the group contains no
+articles, the lowest article number should be reported as 1 and the
+highest as 0.
@example
group-status = [ error / info ] eol
@item (nnchoke-close-group GROUP &optional SERVER)
Close @var{group} and free any resources connected to it. This will be
-a no-op on most backends.
+a no-op on most back ends.
There should be no data returned.
@end example
On each line we have a group name, then the highest article number in
-that group, the lowest article number, and finally a flag.
+that group, the lowest article number, and finally a flag. If the group
+contains no articles, the lowest article number should be reported as 1
+and the highest as 0.
@example
active-file = *active-line
@end table
-@node Optional Backend Functions
-@subsubsection Optional Backend Functions
+@node Optional Back End Functions
+@subsubsection Optional Back End Functions
@table @code
@item (nnchoke-request-update-info GROUP INFO &optional SERVER)
-A Gnus group info (@pxref{Group Info}) is handed to the backend for
-alterations. This comes in handy if the backend really carries all the
-information (as is the case with virtual and imap groups). This
+A Gnus group info (@pxref{Group Info}) is handed to the back end for
+alterations. This comes in handy if the back end really carries all
+the information (as is the case with virtual and imap groups). This
function should destructively alter the info to suit its needs, and
-should return the (altered) group info.
+should return a non-@code{nil} value.
There should be no result data from this function.
@item (nnchoke-request-set-mark GROUP ACTION &optional SERVER)
-Set/remove/add marks on articles. Normally Gnus handles the article
+Set/remove/add marks on articles. Normally Gnus handles the article
marks (such as read, ticked, expired etc) internally, and store them in
-@code{~/.newsrc.eld}. Some backends (such as IMAP) however carry all
-information about the articles on the server, so Gnus need to propagate
-the mark information to the server.
+@file{~/.newsrc.eld}. Some back ends (such as @acronym{IMAP}) however carry
+all information about the articles on the server, so Gnus need to
+propagate the mark information to the server.
-ACTION is a list of mark setting requests, having this format:
+@var{action} is a list of mark setting requests, having this format:
@example
(RANGE ACTION MARK)
@end example
-Range is a range of articles you wish to update marks on. Action is
-@code{set}, @code{add} or @code{del}, respectively used for removing all
-existing marks and setting them as specified, adding (preserving the
-marks not mentioned) mark and removing (preserving the marks not
-mentioned) marks. Mark is a list of marks; where each mark is a
-symbol. Currently used marks are @code{read}, @code{tick}, @code{reply},
-@code{expire}, @code{killed}, @code{dormant}, @code{save},
-@code{download} and @code{unsend}, but your backend should, if possible,
-not limit itself to theese.
+@var{range} is a range of articles you wish to update marks on.
+@var{action} is @code{add} or @code{del}, used to add marks or remove
+marks (preserving all marks not mentioned). @var{mark} is a list of
+marks; where each mark is a symbol. Currently used marks are
+@code{read}, @code{tick}, @code{reply}, @code{expire}, @code{killed},
+@code{dormant}, @code{save}, @code{download}, @code{unsend},
+@code{forward} and @code{recent}, but your back end should, if
+possible, not limit itself to these.
Given contradictory actions, the last action in the list should be the
-effective one. That is, if your action contains a request to add the
+effective one. That is, if your action contains a request to add the
@code{tick} mark on article 1 and, later in the list, a request to
remove the mark on the same article, the mark should in fact be removed.
@item (nnchoke-request-update-mark GROUP ARTICLE MARK)
-If the user tries to set a mark that the backend doesn't like, this
+If the user tries to set a mark that the back end doesn't like, this
function may change the mark. Gnus will use whatever this function
returns as the mark for @var{article} instead of the original
-@var{mark}. If the backend doesn't care, it must return the original
+@var{mark}. If the back end doesn't care, it must return the original
@var{mark}, and not @code{nil} or any other type of garbage.
The only use for this I can see is what @code{nnvirtual} does with
@item (nnchoke-request-scan &optional GROUP SERVER)
This function may be called at any time (by Gnus or anything else) to
-request that the backend check for incoming articles, in one way or
-another. A mail backend will typically read the spool file or query the
-POP server when this function is invoked. The @var{group} doesn't have
-to be heeded---if the backend decides that it is too much work just
-scanning for a single group, it may do a total scan of all groups. It
-would be nice, however, to keep things local if that's practical.
+request that the back end check for incoming articles, in one way or
+another. A mail back end will typically read the spool file or query
+the @acronym{POP} server when this function is invoked. The
+@var{group} doesn't have to be heeded---if the back end decides that
+it is too much work just scanning for a single group, it may do a
+total scan of all groups. It would be nice, however, to keep things
+local if that's practical.
There should be no result data from this function.
@item (nnchoke-request-newgroups DATE &optional SERVER)
The result data from this function should be all groups that were
-created after @samp{date}, which is in normal human-readable date
-format. The data should be in the active buffer format.
+created after @samp{date}, which is in normal human-readable date format
+(i.e., the date format used in mail and news headers, and returned by
+the function @code{message-make-date} by default). The data should be
+in the active buffer format.
+
+It is okay for this function to return ``too many'' groups; some back ends
+might find it cheaper to return the full list of groups, rather than
+just the new groups. But don't do this for back ends with many groups.
+Normally, if the user creates the groups herself, there won't be too
+many groups, so @code{nnml} and the like are probably safe. But for
+back ends like @code{nntp}, where the groups have been created by the
+server, it is quite likely that there can be many groups.
@item (nnchoke-request-create-group GROUP &optional SERVER)
This function should run the expiry process on all articles in the
@var{articles} range (which is currently a simple list of article
-numbers.) It is left up to the backend to decide how old articles
+numbers.) It is left up to the back end to decide how old articles
should be before they are removed by this function. If @var{force} is
non-@code{nil}, all @var{articles} should be deleted, no matter how new
they are.
There should be no result data returned.
-@item (nnchoke-request-move-article ARTICLE GROUP SERVER ACCEPT-FORM
-&optional LAST)
+@item (nnchoke-request-move-article ARTICLE GROUP SERVER ACCEPT-FORM &optional LAST)
This function should move @var{article} (which is a number) from
@var{group} by calling @var{accept-form}.
The function should return a cons where the @code{car} is the group name and
the @code{cdr} is the article number that the article was entered as.
+The group should exist before the back end is asked to accept the
+article for that group.
+
There should be no data returned.
@findex nnheader-report
@findex nnheader-get-report
-The backends should use the function @code{nnheader-report} to report
+The back ends should use the function @code{nnheader-report} to report
error conditions---they should not raise errors when they aren't able to
-perform a request. The first argument to this function is the backend
+perform a request. The first argument to this function is the back end
symbol, and the rest are interpreted as arguments to @code{format} if
there are multiple of them, or just a string if there is one of them.
This function must always returns @code{nil}.
Gnus, in turn, will call @code{nnheader-get-report} when it gets a
@code{nil} back from a server, and this function returns the most
-recently reported message for the backend in question. This function
+recently reported message for the back end in question. This function
takes one argument---the server symbol.
-Internally, these functions access @var{backend}@code{-status-string},
-so the @code{nnchoke} backend will have its error message stored in
+Internally, these functions access @var{back-end}@code{-status-string},
+so the @code{nnchoke} back end will have its error message stored in
@code{nnchoke-status-string}.
-@node Writing New Backends
-@subsubsection Writing New Backends
+@node Writing New Back Ends
+@subsubsection Writing New Back Ends
-Many backends are quite similar. @code{nnml} is just like
+Many back ends are quite similar. @code{nnml} is just like
@code{nnspool}, but it allows you to edit the articles on the server.
@code{nnmh} is just like @code{nnml}, but it doesn't use an active file,
and it doesn't maintain overview databases. @code{nndir} is just like
editing articles.
It would make sense if it were possible to ``inherit'' functions from
-backends when writing new backends. And, indeed, you can do that if you
+back ends when writing new back ends. And, indeed, you can do that if you
want to. (You don't have to if you don't want to, of course.)
-All the backends declare their public variables and functions by using a
+All the back ends declare their public variables and functions by using a
package called @code{nnoo}.
-To inherit functions from other backends (and allow other backends to
-inherit functions from the current backend), you should use the
+To inherit functions from other back ends (and allow other back ends to
+inherit functions from the current back end), you should use the
following macros:
@table @code
declared with @code{defvoo} instead of @code{defvar}.
In addition to the normal @code{defvar} parameters, it takes a list of
-variables in the parent backends to map the variable to when executing
-a function in those backends.
+variables in the parent back ends to map the variable to when executing
+a function in those back ends.
@lisp
(defvoo nndir-directory nil
of @code{nndir}. (The same with @code{nnmh}.)
@item nnoo-define-basics
-This macro defines some common functions that almost all backends should
+This macro defines some common functions that almost all back ends should
have.
-@example
+@lisp
(nnoo-define-basics nndir)
-@end example
+@end lisp
@item deffoo
This macro is just like @code{defun} and takes the same parameters. In
addition to doing the normal @code{defun} things, it registers the
-function as being public so that other backends can inherit it.
+function as being public so that other back ends can inherit it.
@item nnoo-map-functions
-This macro allows mapping of functions from the current backend to
-functions from the parent backends.
+This macro allows mapping of functions from the current back end to
+functions from the parent back ends.
-@example
+@lisp
(nnoo-map-functions nndir
(nnml-retrieve-headers 0 nndir-current-group 0 0)
(nnmh-request-article 0 nndir-current-group 0 0))
-@end example
+@end lisp
This means that when @code{nndir-retrieve-headers} is called, the first,
third, and fourth parameters will be passed on to
value of @code{nndir-current-group}.
@item nnoo-import
-This macro allows importing functions from backends. It should be the
+This macro allows importing functions from back ends. It should be the
last thing in the source file, since it will only define functions that
haven't already been defined.
-@example
+@lisp
(nnoo-import nndir
(nnmh
nnmh-request-list
nnmh-request-newgroups)
(nnml))
-@end example
+@end lisp
This means that calls to @code{nndir-request-list} should just be passed
on to @code{nnmh-request-list}, while all public functions from
@end table
-Below is a slightly shortened version of the @code{nndir} backend.
+Below is a slightly shortened version of the @code{nndir} back end.
@lisp
-;;; nndir.el --- single directory newsgroup access for Gnus
-;; Copyright (C) 1995,96 Free Software Foundation, Inc.
+;;; @r{nndir.el --- single directory newsgroup access for Gnus}
+;; @r{Copyright (C) 1995,96 Free Software Foundation, Inc.}
-;;; Code:
+;;; @r{Code:}
(require 'nnheader)
(require 'nnmh)
"*Non-nil means that nndir will never retrieve NOV headers."
nnml-nov-is-evil)
-(defvoo nndir-current-group "" nil nnml-current-group nnmh-current-group)
+(defvoo nndir-current-group ""
+ nil
+ nnml-current-group nnmh-current-group)
(defvoo nndir-top-directory nil nil nnml-directory nnmh-directory)
(defvoo nndir-get-new-mail nil nil nnml-get-new-mail nnmh-get-new-mail)
(defvoo nndir-status-string "" nil nnmh-status-string)
(defconst nndir-version "nndir 1.0")
-;;; Interface functions.
+;;; @r{Interface functions.}
(nnoo-define-basics nndir)
(unless (assq 'nndir-directory defs)
(push `(nndir-directory ,server) defs))
(push `(nndir-current-group
- ,(file-name-nondirectory (directory-file-name nndir-directory)))
+ ,(file-name-nondirectory
+ (directory-file-name nndir-directory)))
defs)
(push `(nndir-top-directory
,(file-name-directory (directory-file-name nndir-directory)))
@end lisp
-@node Hooking New Backends Into Gnus
-@subsubsection Hooking New Backends Into Gnus
+@node Hooking New Back Ends Into Gnus
+@subsubsection Hooking New Back Ends Into Gnus
@vindex gnus-valid-select-methods
-Having Gnus start using your new backend is rather easy---you just
+@findex gnus-declare-backend
+Having Gnus start using your new back end is rather easy---you just
declare it with the @code{gnus-declare-backend} functions. This will
-enter the backend into the @code{gnus-valid-select-methods} variable.
+enter the back end into the @code{gnus-valid-select-methods} variable.
-@code{gnus-declare-backend} takes two parameters---the backend name and
+@code{gnus-declare-backend} takes two parameters---the back end name and
an arbitrary number of @dfn{abilities}.
Here's an example:
(gnus-declare-backend "nnchoke" 'mail 'respool 'address)
@end lisp
+The above line would then go in the @file{nnchoke.el} file.
+
The abilities can be:
@table @code
@item mail
-This is a mailish backend---followups should (probably) go via mail.
+This is a mailish back end---followups should (probably) go via mail.
@item post
-This is a newsish backend---followups should (probably) go via news.
+This is a newsish back end---followups should (probably) go via news.
@item post-mail
-This backend supports both mail and news.
+This back end supports both mail and news.
@item none
-This is neither a post nor mail backend---it's something completely
+This is neither a post nor mail back end---it's something completely
different.
@item respool
It supports respooling---or rather, it is able to modify its source
articles and groups.
@item address
The name of the server should be in the virtual server name. This is
-true for almost all backends.
+true for almost all back ends.
@item prompt-address
The user should be prompted for an address when doing commands like
-@kbd{B} in the group buffer. This is true for backends like
+@kbd{B} in the group buffer. This is true for back ends like
@code{nntp}, but not @code{nnmbox}, for instance.
@end table
-@node Mail-like Backends
-@subsubsection Mail-like Backends
+@node Mail-like Back Ends
+@subsubsection Mail-like Back Ends
-One of the things that separate the mail backends from the rest of the
-backends is the heavy dependence by the mail backends on common
-functions in @file{nnmail.el}. For instance, here's the definition of
-@code{nnml-request-scan}:
+One of the things that separate the mail back ends from the rest of the
+back ends is the heavy dependence by most of the mail back ends on
+common functions in @file{nnmail.el}. For instance, here's the
+definition of @code{nnml-request-scan}:
@lisp
(deffoo nnml-request-scan (&optional group server)
@table @var
@item method
-This should be a symbol to designate which backend is responsible for
+This should be a symbol to designate which back end is responsible for
the call.
@item exit-function
performed for one group only.
@end table
-@code{nnmail-get-new-mail} will call @var{backend}@code{-save-mail} to
-save each article. @var{backend}@code{-active-number} will be called to
+@code{nnmail-get-new-mail} will call @var{back-end}@code{-save-mail} to
+save each article. @var{back-end}@code{-active-number} will be called to
find the article number assigned to this article.
The function also uses the following variables:
-@var{backend}@code{-get-new-mail} (to see whether to get new mail for
-this backend); and @var{backend}@code{-group-alist} and
-@var{backend}@code{-active-file} to generate the new active file.
-@var{backend}@code{-group-alist} should be a group-active alist, like
+@var{back-end}@code{-get-new-mail} (to see whether to get new mail for
+this back end); and @var{back-end}@code{-group-alist} and
+@var{back-end}@code{-active-file} to generate the new active file.
+@var{back-end}@code{-group-alist} should be a group-active alist, like
this:
@example
@subsection Score File Syntax
Score files are meant to be easily parseable, but yet extremely
-mallable. It was decided that something that had the same read syntax
+mallable. It was decided that something that had the same read syntax
as an Emacs Lisp list would fit that spec.
Here's a typical score file:
BNF definition of a score file:
@example
-score-file = "" / "(" *element ")"
-element = rule / atom
-rule = string-rule / number-rule / date-rule
-string-rule = "(" quote string-header quote space *string-match ")"
-number-rule = "(" quote number-header quote space *number-match ")"
-date-rule = "(" quote date-header quote space *date-match ")"
-quote = <ascii 34>
-string-header = "subject" / "from" / "references" / "message-id" /
- "xref" / "body" / "head" / "all" / "followup"
-number-header = "lines" / "chars"
-date-header = "date"
-string-match = "(" quote <string> quote [ "" / [ space score [ "" /
- space date [ "" / [ space string-match-t ] ] ] ] ] ")"
-score = "nil" / <integer>
-date = "nil" / <natural number>
-string-match-t = "nil" / "s" / "substring" / "S" / "Substring" /
- "r" / "regex" / "R" / "Regex" /
- "e" / "exact" / "E" / "Exact" /
- "f" / "fuzzy" / "F" / "Fuzzy"
-number-match = "(" <integer> [ "" / [ space score [ "" /
- space date [ "" / [ space number-match-t ] ] ] ] ] ")"
-number-match-t = "nil" / "=" / "<" / ">" / ">=" / "<="
-date-match = "(" quote <string> quote [ "" / [ space score [ "" /
- space date [ "" / [ space date-match-t ] ] ] ] ")"
-date-match-t = "nil" / "at" / "before" / "after"
-atom = "(" [ required-atom / optional-atom ] ")"
-required-atom = mark / expunge / mark-and-expunge / files /
- exclude-files / read-only / touched
-optional-atom = adapt / local / eval
-mark = "mark" space nil-or-number
-nil-or-number = "nil" / <integer>
-expunge = "expunge" space nil-or-number
+score-file = "" / "(" *element ")"
+element = rule / atom
+rule = string-rule / number-rule / date-rule
+string-rule = "(" quote string-header quote space *string-match ")"
+number-rule = "(" quote number-header quote space *number-match ")"
+date-rule = "(" quote date-header quote space *date-match ")"
+quote = <ascii 34>
+string-header = "subject" / "from" / "references" / "message-id" /
+ "xref" / "body" / "head" / "all" / "followup"
+number-header = "lines" / "chars"
+date-header = "date"
+string-match = "(" quote <string> quote [ "" / [ space score [ "" /
+ space date [ "" / [ space string-match-t ] ] ] ] ] ")"
+score = "nil" / <integer>
+date = "nil" / <natural number>
+string-match-t = "nil" / "s" / "substring" / "S" / "Substring" /
+ "r" / "regex" / "R" / "Regex" /
+ "e" / "exact" / "E" / "Exact" /
+ "f" / "fuzzy" / "F" / "Fuzzy"
+number-match = "(" <integer> [ "" / [ space score [ "" /
+ space date [ "" / [ space number-match-t ] ] ] ] ] ")"
+number-match-t = "nil" / "=" / "<" / ">" / ">=" / "<="
+date-match = "(" quote <string> quote [ "" / [ space score [ "" /
+ space date [ "" / [ space date-match-t ] ] ] ] ")"
+date-match-t = "nil" / "at" / "before" / "after"
+atom = "(" [ required-atom / optional-atom ] ")"
+required-atom = mark / expunge / mark-and-expunge / files /
+ exclude-files / read-only / touched
+optional-atom = adapt / local / eval
+mark = "mark" space nil-or-number
+nil-or-number = "nil" / <integer>
+expunge = "expunge" space nil-or-number
mark-and-expunge = "mark-and-expunge" space nil-or-number
-files = "files" *[ space <string> ]
-exclude-files = "exclude-files" *[ space <string> ]
-read-only = "read-only" [ space "nil" / space "t" ]
-adapt = "adapt" [ space "ignore" / space "t" / space adapt-rule ]
-adapt-rule = "(" *[ <string> *[ "(" <string> <integer> ")" ] ")"
-local = "local" *[ space "(" <string> space <form> ")" ]
-eval = "eval" space <form>
-space = *[ " " / <TAB> / <NEWLINE> ]
+files = "files" *[ space <string> ]
+exclude-files = "exclude-files" *[ space <string> ]
+read-only = "read-only" [ space "nil" / space "t" ]
+adapt = "adapt" [ space "ignore" / space "t" / space adapt-rule ]
+adapt-rule = "(" *[ <string> *[ "(" <string> <integer> ")" ] ")"
+local = "local" *[ space "(" <string> space <form> ")" ]
+eval = "eval" space <form>
+space = *[ " " / <TAB> / <NEWLINE> ]
@end example
Any unrecognized elements in a score file should be ignored, but not
@subsection Headers
Internally Gnus uses a format for storing article headers that
-corresponds to the @sc{nov} format in a mysterious fashion. One could
-almost suspect that the author looked at the @sc{nov} specification and
+corresponds to the @acronym{NOV} format in a mysterious fashion. One could
+almost suspect that the author looked at the @acronym{NOV} specification and
just shamelessly @emph{stole} the entire thing, and one would be right.
@dfn{Header} is a severely overloaded term. ``Header'' is used in
-RFC1036 to talk about lines in the head of an article (e.g.,
+RFC 1036 to talk about lines in the head of an article (e.g.,
@code{From}). It is used by many people as a synonym for
``head''---``the header and the body''. (That should be avoided, in my
opinion.) And Gnus uses a format internally that it calls ``header'',
@subsection Various File Formats
@menu
-* Active File Format:: Information on articles and groups available.
-* Newsgroups File Format:: Group descriptions.
+* Active File Format:: Information on articles and groups available.
+* Newsgroups File Format:: Group descriptions.
@end menu
@example
active = *group-line
-group-line = group space high-number space low-number space flag <NEWLINE>
+group-line = group spc high-number spc low-number spc flag <NEWLINE>
group = <non-white-space string>
-space = " "
+spc = " "
high-number = <non-negative integer>
low-number = <positive integer>
flag = "y" / "n" / "m" / "j" / "x" / "=" group
Believe it or not, but some people who use Gnus haven't really used
Emacs much before they embarked on their journey on the Gnus Love Boat.
-If you are one of those unfortunates whom ``@kbd{M-C-a}'', ``kill the
+If you are one of those unfortunates whom ``@kbd{C-M-a}'', ``kill the
region'', and ``set @code{gnus-flargblossen} to an alist where the key
is a regexp that is used for matching on the group name'' are magical
phrases with little or no meaning, then this appendix is for you. If
cat instead.
@menu
-* Keystrokes:: Entering text and executing commands.
-* Emacs Lisp:: The built-in Emacs programming language.
+* Keystrokes:: Entering text and executing commands.
+* Emacs Lisp:: The built-in Emacs programming language.
@end menu
to the left hand side of the keyboard, usually on the bottom row.
Now, us Emacs people don't say ``press the meta-control-m key'',
-because that's just too inconvenient. We say ``press the @kbd{M-C-m}
+because that's just too inconvenient. We say ``press the @kbd{C-M-m}
key''. @kbd{M-} is the prefix that means ``meta'' and ``C-'' is the
prefix that means ``control''. So ``press @kbd{C-k}'' means ``press
down the control key, and hold it down while you press @kbd{k}''.
-``Press @kbd{M-C-k}'' means ``press down and hold down the meta key and
+``Press @kbd{C-M-k}'' means ``press down and hold down the meta key and
the control key and then press @kbd{k}''. Simple, ay?
This is somewhat complicated by the fact that not all keyboards have a
This function (really ``special form'') @code{setq} is the one that can
set a variable to some value. This is really all you need to know. Now
-you can go and fill your @code{.emacs} file with lots of these to change
+you can go and fill your @file{.emacs} file with lots of these to change
how Gnus works.
-If you have put that thing in your @code{.emacs} file, it will be read
+If you have put that thing in your @file{.emacs} file, it will be read
and @code{eval}ed (which is lisp-ese for ``run'') the next time you
start Emacs. If you want to change the variable right away, simply say
@kbd{C-x C-e} after the closing parenthesis. That will @code{eval} the
@end iflatex
@end iftex
+@c Local Variables:
+@c mode: texinfo
+@c coding: iso-8859-1
@c End: