\input texinfo @c -*-texinfo-*-
@setfilename message
-@settitle Pterodactyl Message 0.73 Manual
+@settitle T-gnus 6.14 Message Manual
@synindex fn cp
@synindex vr cp
@synindex pg cp
-@c @direntry
-@c * Message: (message). Mail and news composition mode that goes with Gnus.
-@c @end direntry
+@dircategory Editors
+@direntry
+* Message: (message). Mail and news composition mode that goes with Gnus.
+@end direntry
@iftex
@finalout
@end iftex
@setchapternewpage odd
-@ifinfo
+@ifnottex
This file documents Message, the Emacs message composition mode.
-Copyright (C) 1996,97,98 Free Software Foundation, Inc.
+Copyright (C) 1996,97,98,99,2000 Free Software Foundation, Inc.
-Permission is granted to make and distribute verbatim copies of
-this manual provided the copyright notice and this permission notice
-are preserved on all copies.
+Permission is granted to copy, distribute and/or modify this document
+under the terms of the GNU Free Documentation License, Version 1.1 or
+any later version published by the Free Software Foundation; with no
+Invariant Sections, with the Front-Cover texts being ``A GNU
+Manual'', and with the Back-Cover Texts as in (a) below. A copy of the
+license is included in the section entitled ``GNU Free Documentation
+License'' in the Emacs manual.
-@ignore
-Permission is granted to process this file through Tex and print the
-results, provided the printed document carries copying permission
-notice identical to this one except for the removal of this paragraph
-(this paragraph not being relevant to the printed manual).
+(a) The FSF's Back-Cover Text is: ``You have freedom to copy and modify
+this GNU Manual, like GNU software. Copies published by the Free
+Software Foundation raise funds for GNU development.''
-@end ignore
-Permission is granted to copy and distribute modified versions of this
-manual under the conditions for verbatim copying, provided also that the
-entire resulting derived work is distributed under the terms of a
-permission notice identical to this one.
-
-Permission is granted to copy and distribute translations of this manual
-into another language, under the above conditions for modified versions.
-@end ifinfo
+This document is part of a collection distributed under the GNU Free
+Documentation License. If you want to distribute this document
+separately from the collection, you can do so by adding a copy of the
+license to the document, as described in section 6 of the license.
+@end ifnottex
@tex
@titlepage
-@title Pterodactyl Message 0.73 Manual
+@title T-gnus 6.14 Message Manual
@author by Lars Magne Ingebrigtsen
@page
@vskip 0pt plus 1filll
-Copyright @copyright{} 1996 Free Software Foundation, Inc.
-
-Permission is granted to make and distribute verbatim copies of
-this manual provided the copyright notice and this permission notice
-are preserved on all copies.
-
-Permission is granted to copy and distribute modified versions of this
-manual under the conditions for verbatim copying, provided that the
-entire resulting derived work is distributed under the terms of a
-permission notice identical to this one.
-
-Permission is granted to copy and distribute translations of this manual
-into another language, under the above conditions for modified versions.
-
+Copyright @copyright{} 1996,97,98,99,2000 Free Software Foundation, Inc.
+
+Permission is granted to copy, distribute and/or modify this document
+under the terms of the GNU Free Documentation License, Version 1.1 or
+any later version published by the Free Software Foundation; with the
+Invariant Sections being none, with the Front-Cover texts being ``A GNU
+Manual'', and with the Back-Cover Texts as in (a) below. A copy of the
+license is included in the section entitled ``GNU Free Documentation
+License'' in the Emacs manual.
+
+(a) The FSF's Back-Cover Text is: ``You have freedom to copy and modify
+this GNU Manual, like GNU software. Copies published by the Free
+Software Foundation raise funds for GNU development.''
+
+This document is part of a collection distributed under the GNU Free
+Documentation License. If you want to distribute this document
+separately from the collection, you can do so by adding a copy of the
+license to the document, as described in section 6 of the license.
@end titlepage
@page
* Key Index:: List of Message mode keys.
@end menu
-This manual corresponds to Pterodactyl Message 0.73. Message is
+This manual corresponds to T-gnus 6.14 Message. Message is
distributed with the Gnus distribution bearing the same version number
as this manual.
@section New Mail Message
@findex message-mail
-The @code{message-mail} command pops up a new message buffer.
+The @code{message-mail} command pops up a new message buffer.
Two optional parameters are accepted: The first will be used as the
@code{To} header and the second as the @code{Subject} header. If these
@section New News Message
@findex message-news
-The @code{message-news} command pops up a new message buffer.
+The @code{message-news} command pops up a new message buffer.
This function accepts two optional parameters. The first will be used
as the @code{Newsgroups} header and the second as the @code{Subject}
(setq message-reply-to-function
(lambda ()
(cond ((equal (mail-fetch-field "from") "somebody")
- (mail-fetch-field "sender"))
- (t
+ (list (cons 'To (mail-fetch-field "sender"))))
+ (t
nil))))
@end lisp
should be a cons, where the car should be the name of an header
(eg. @code{Cc}) and the cdr should be the header value
(eg. @samp{larsi@@ifi.uio.no}). All these headers will be inserted into
-the head of the outgoing mail.
+the head of the outgoing mail.
@node Wide Reply
Message uses the normal methods to determine where wide replies are to go,
but you can change the behavior to suit your needs by fiddling with the
@code{message-wide-reply-to-function}. It is used in the same way as
-@code{message-reply-to-function} (@pxref{Reply}).
+@code{message-reply-to-function} (@pxref{Reply}).
-@findex rmail-dont-reply-to-names
-Addresses that match the @code{rmail-dont-reply-to-names} regular
+@findex message-dont-reply-to-names
+Addresses that match the @code{message-dont-reply-to-names} regular
expression will be removed from the @code{Cc} header.
news.
@table @code
-@item message-forward-start-separator
-@vindex message-forward-start-separator
-Delimiter inserted before forwarded messages. The default is@*
-@samp{------- Start of forwarded message -------\n}.
-
-@vindex message-forward-end-separator
-@item message-forward-end-separator
-@vindex message-forward-end-separator
-Delimiter inserted after forwarded messages. The default is@*
-@samp{------- End of forwarded message -------\n}.
-
-@item message-signature-before-forwarded-message
-@vindex message-signature-before-forwarded-message
-If this variable is @code{t}, which it is by default, your personal
-signature will be inserted before the forwarded message. If not, the
-forwarded message will be inserted first in the new mail.
-
-@item message-included-forward-headers
-@vindex message-included-forward-headers
-Regexp matching header lines to be included in forwarded messages.
+@item message-forward-ignored-headers
+@vindex message-forward-ignored-headers
+All headers that match this regexp will be deleted when forwarding a message.
@item message-make-forward-subject-function
@vindex message-make-forward-subject-function
@item message-wash-forwarded-subjects
@vindex message-wash-forwarded-subjects
If this variable is @code{t}, the subjects of forwarded messages have
-the evidence of previous forwards (such as @samp{Fwd:}, @samp{Re:},
+the evidence of previous forwards (such as @samp{Fwd:}, @samp{Re:},
@samp{(fwd)}) removed before the new subject is
constructed. The default value is @code{nil}.
+@item message-forward-as-mime
+@vindex message-forward-as-mime
+If this variable is @code{t} (the default), forwarded messages are
+included as inline MIME RFC822 parts. If it's @code{nil}, forwarded
+messages will just be copied inline to the new message, like previous,
+non MIME-savvy versions of gnus would do.
@end table
@vindex message-ignored-resent-headers
Headers that match the @code{message-ignored-resent-headers} regexp will
be removed before sending the message. The default is
-@samp{^Return-receipt}.
+@samp{^Return-receipt}.
@node Bouncing
bounced mail message, pop up a message buffer stripped of the bounce
information. A @dfn{bounced message} is typically a mail you've sent
out that has been returned by some @code{mailer-daemon} as
-undeliverable.
+undeliverable.
@vindex message-ignored-bounced-headers
Headers that match the @code{message-ignored-bounced-headers} regexp
* Header Commands:: Commands for moving to headers.
* Movement:: Moving around in message buffers.
* Insertion:: Inserting things into message buffers.
+* MIME:: @sc{mime} considerations.
+* Security:: Signing and encrypting messages.
* Various Commands:: Various things.
* Sending:: Actually sending the message.
* Mail Aliases:: How to use mail aliases.
Describe the message mode.
@item C-c C-f C-t
-@kindex C-c C-f C-t
+@kindex C-c C-f C-t
@findex message-goto-to
Go to the @code{To} header (@code{message-goto-to}).
@item C-c C-f C-b
-@kindex C-c C-f C-b
+@kindex C-c C-f C-b
@findex message-goto-bcc
Go to the @code{Bcc} header (@code{message-goto-bcc}).
@item C-c C-f C-f
-@kindex C-c C-f C-f
+@kindex C-c C-f C-f
@findex message-goto-fcc
Go to the @code{Fcc} header (@code{message-goto-fcc}).
@item C-c C-f C-c
-@kindex C-c C-f C-c
+@kindex C-c C-f C-c
@findex message-goto-cc
Go to the @code{Cc} header (@code{message-goto-cc}).
@item C-c C-f C-s
-@kindex C-c C-f C-s
+@kindex C-c C-f C-s
@findex message-goto-subject
Go to the @code{Subject} header (@code{message-goto-subject}).
@item C-c C-f C-r
-@kindex C-c C-f C-r
+@kindex C-c C-f C-r
@findex message-goto-reply-to
Go to the @code{Reply-To} header (@code{message-goto-reply-to}).
@item C-c C-f C-n
-@kindex C-c C-f C-n
+@kindex C-c C-f C-n
@findex message-goto-newsgroups
Go to the @code{Newsgroups} header (@code{message-goto-newsgroups}).
@item C-c C-f C-d
-@kindex C-c C-f C-d
+@kindex C-c C-f C-d
@findex message-goto-distribution
Go to the @code{Distribution} header (@code{message-goto-distribution}).
@item C-c C-f C-o
-@kindex C-c C-f C-o
+@kindex C-c C-f C-o
@findex message-goto-followup-to
Go to the @code{Followup-To} header (@code{message-goto-followup-to}).
@item C-c C-f C-k
-@kindex C-c C-f C-k
+@kindex C-c C-f C-k
@findex message-goto-keywords
Go to the @code{Keywords} header (@code{message-goto-keywords}).
@item C-c C-f C-u
-@kindex C-c C-f C-u
+@kindex C-c C-f C-u
@findex message-goto-summary
Go to the @code{Summary} header (@code{message-goto-summary}).
@table @kbd
@item C-c C-b
-@kindex C-c C-b
+@kindex C-c C-b
@findex message-goto-body
Move to the beginning of the body of the message
-(@code{message-goto-body}).
+(@code{message-goto-body}).
@item C-c C-i
-@kindex C-c C-i
+@kindex C-c C-i
@findex message-goto-signature
Move to the signature of the message (@code{message-goto-signature}).
@table @kbd
@item C-c C-y
-@kindex C-c C-y
+@kindex C-c C-y
@findex message-yank-original
-Yank the message that's being replied to into the message buffer
-(@code{message-yank-original}).
+Yank the message in the buffer @code{gnus-article-copy} into the message
+buffer. Normally @code{gnus-article-copy} is what you are replying to
+(@code{message-yank-original}).
+
+@item C-c M-C-y
+@kindex C-c M-C-y
+@findex message-yank-buffer
+Prompt for a buffer name and yank the contents of that buffer into the
+message buffer (@code{message-yank-buffer}).
@item C-c C-q
-@kindex C-c C-q
+@kindex C-c C-q
@findex message-fill-yanked-message
Fill the yanked message (@code{message-fill-yanked-message}). Warning:
Can severely mess up the yanked text if its quoting conventions are
all right.
@item C-c C-w
-@kindex C-c C-w
+@kindex C-c C-w
@findex message-insert-signature
Insert a signature at the end of the buffer
-(@code{message-insert-signature}).
+(@code{message-insert-signature}).
@item C-c M-h
@kindex C-c M-h
messages. The default is @samp{.}, which means that all headers will be
removed.
+@item message-cite-prefix-regexp
+@vindex message-cite-prefix-regexp
+Regexp matching the longest possible citation prefix on a line.
+
@item message-citation-line-function
@vindex message-citation-line-function
Function called to insert the citation line. The default is
@dfn{yanking}, and each quoted line you yank will have
@code{message-yank-prefix} prepended to it. The default is @samp{> }.
+@item message-yank-add-new-references
+@vindex message-yank-add-new-references
+@cindex yanking
+Non-@code{nil} means new IDs will be added to References field when an
+article is yanked by the command @code{message-yank-original}
+interactively. If it is a symbol @code{message-id-only}, only an ID
+from Message-ID field is used, otherwise IDs extracted from References,
+In-Reply-To and Message-ID fields are used.
+
+@item message-list-references-add-position
+@vindex message-list-references-add-position
+@cindex yanking
+Integer value means position for adding to References field when an
+article is yanked by the command @code{message-yank-original}
+interactively.
+
@item message-indentation-spaces
@vindex message-indentation-spaces
Number of spaces to indent yanked messages.
that you are silly and have nothing important to say.
+@node MIME
+@section MIME
+@cindex MML
+@cindex MIME
+@cindex multipart
+@cindex attachment
+
+Message is a @sc{mime}-compliant posting agent. The user generally
+doesn't have to do anything to make the @sc{mime} happen---Message will
+automatically add the @code{Content-Type} and
+@code{Content-Transfer-Encoding} headers.
+
+The most typical thing users want to use the multipart things in
+@sc{mime} for is to add ``attachments'' to mail they send out. This can
+be done with the @code{C-c C-a} command, which will prompt for a file
+name and a @sc{mime} type.
+
+You can also create arbitrarily complex multiparts using the MML
+language (@pxref{Composing, , Composing, emacs-mime, The Emacs MIME
+Manual}).
+
+@node Security
+@section Security
+@cindex Security
+@cindex S/MIME
+@cindex PGP/MIME
+@cindex sign
+@cindex encrypt
+
+Using the MML language, Message is able to create digitally signed and
+digitally encrypted messages. Message (or rather MML) currently support
+PGP/MIME and S/MIME. Instructing MML to perform security operations on
+a MIME part is done using the @code{M-m s} key map for signing and the
+@code{M-m c} key map for encryption, as follows.
+
+@table @kbd
+
+@item M-m s s
+@kindex M-m s s
+@findex mml-secure-sign-smime
+
+Digitally sign current MIME part using S/MIME.
+
+@item M-m s p
+@kindex M-m s p
+@findex mml-secure-sign-pgp
+
+Digitally sign current MIME part using PGP/MIME.
+
+@item M-m c s
+@kindex M-m c s
+@findex mml-secure-encrypt-smime
+
+Digitally encrypt current MIME part using S/MIME.
+
+@item M-m c p
+@kindex M-m c p
+@findex mml-secure-encrypt-pgpmime
+
+Digitally encrypt current MIME part using PGP/MIME.
+
+@end table
+
+These commands do not immediately sign or encrypt the message, they
+merely insert proper MML tags to instruct the MML engine to perform that
+operation when the message is actually sent. They may perform other
+operations too, such as locating and retrieving a S/MIME certificate of
+the person you wish to send encrypted mail to.
+
+Since signing and especially encryption often is used when sensitive
+information is sent, you may want to have some way to ensure that your
+mail is actually signed or encrypted. After invoking the above
+sign/encrypt commands, it is possible to preview the raw article by
+using @code{C-u M-m P} (@code{mml-preview}). Then you can verify that
+your long rant about what your ex-significant other or whomever actually
+did with that funny looking person at that strange party the other
+night, actually will be sent encrypted.
+
+@emph{Note!} Neither PGP/MIME nor S/MIME encrypt/signs RFC822 headers.
+They only operate on the MIME object. Keep this in mind before sending
+mail with a sensitive Subject line.
+
+Actually using the security commands above is not very difficult. At
+least not compared with making sure all involved programs talk with each
+other properly. Thus, we now describe what external libraries or
+programs are required to make things work, and some small general hints.
+
+@subsection Using S/MIME
+
+@emph{Note!} This section assume you have a basic familiarity with
+modern cryptography, S/MIME, various PKCS standards, OpenSSL and so on.
+
+The S/MIME support in Message (and MML) require OpenSSL. OpenSSL
+perform the actual S/MIME sign/encrypt operations. OpenSSL can be found
+at @code{http://www.openssl.org/}. OpenSSL 0.9.5a and later should
+work. However, version 0.9.5a insert a spurious CR character into MIME
+separators so you may wish to avoid it if you would like to avoid being
+regarded as someone who send strange mail. (Although by sending S/MIME
+messages you've probably already lost that contest.)
+
+To be able to send encrypted mail, a personal certificate is not
+required. Message (MML) need a certificate for the person to whom you
+wish to communicate with though. You're asked for this when you type
+@code{M-m c s}. Currently there are two ways to retrieve this
+certificate, from a local file or from DNS. If you chose a local file,
+it need to contain a X.509 certificate in PEM format. If you chose DNS,
+you're asked for the domain name where the certificate is stored, the
+default is a good guess. To my belief, Message (MML) is the first mail
+agent in the world to support retrieving S/MIME certificates from DNS,
+so you're not likely to find very many certificates out there. At least
+there should be one, stored at the domain @code{simon.josefsson.org}.
+LDAP is a more popular method of distributing certificates, support for
+it is planned. (Meanwhile, you can use @code{ldapsearch} from the
+command line to retrieve a certificate into a file and use it.)
+
+As for signing messages, OpenSSL can't perform signing operations
+without some kind of configuration. Especially, you need to tell it
+where your private key and your certificate is stored. MML uses an
+Emacs interface to OpenSSL, aptly named @code{smime.el}, and it contain
+a @code{custom} group used for this configuration. So, try @code{M-x
+customize-group RET smime RET} and look around.
+
+Currently there is no support for talking to a CA (or RA) to create your
+own certificate. None is planned either. You need to do this manually
+with OpenSSL or using some other program. I used Netscape and got a
+free S/MIME certificate from one of the big CA's on the net. Netscape
+is able to export your private key and certificate in PKCS #12 format.
+Use OpenSSL to convert this into a plain X.509 certificate in PEM format
+as follows.
+
+@example
+$ openssl pkcs12 -in ns.p12 -clcerts -nodes > key+cert.pem
+@end example
+
+The @code{key+cert.pem} file should be pointed to from the
+@code{smime-keys} variable. You should now be able to send signed mail.
+
+@emph{Note!} Your private key is store unencrypted in the file, so take
+care in handling it.
+
+@subsection Using PGP/MIME
+
+PGP/MIME require an external OpenPGP implementation, such as GNU Privacy
+Guard (@code{http://www.gnupg.org/}. It also require a Emacs interface
+to it, such as Mailcrypt (available from
+@code{http://www.nb.net/~lbudney/linux/software/mailcrypt.html}) or
+Florian Weimer's @code{gpg.el}.
+
+Creating your own OpenPGP key is described in detail in the
+documentation of your OpenPGP implementation, so we refer to it.
@node Various Commands
@section Various Commands
@table @kbd
@item C-c C-r
-@kindex C-c C-r
+@kindex C-c C-r
@findex message-caesar-buffer-body
Caesar rotate (aka. rot13) the current message
(@code{message-caesar-buffer-body}). If narrowing is in effect, just
@kindex C-c C-e
@findex message-elide-region
Elide the text between point and mark (@code{message-elide-region}).
-The text is killed and an ellipsis (@samp{[...]}) will be inserted in
-its place.
+The text is killed and replaced with the contents of the variable
+@code{message-elide-ellipsis}. The default value is to use an ellipsis
+(@samp{[...]}).
@item C-c C-z
@kindex C-c C-x
> And here's more quoted text.
@end example
-@samp{*} says where point will be placed.
+@samp{*} says where point will be placed.
@item C-c C-t
-@kindex C-c C-t
+@kindex C-c C-t
@findex message-insert-to
Insert a @code{To} header that contains the @code{Reply-To} or
@code{From} header of the message you're following up
-(@code{message-insert-to}).
+(@code{message-insert-to}).
@item C-c C-n
-@kindex C-c C-n
+@kindex C-c C-n
@findex message-insert-newsgroups
Insert a @code{Newsgroups} header that reflects the @code{Followup-To}
or @code{Newsgroups} header of the article you're replying to
@table @kbd
@item C-c C-c
-@kindex C-c C-c
+@kindex C-c C-c
@findex message-send-and-exit
Send the message and bury the current buffer
-(@code{message-send-and-exit}).
+(@code{message-send-and-exit}).
@item C-c C-s
-@kindex C-c C-s
+@kindex C-c C-s
@findex message-send
-Send the message (@code{message-send}).
+Send the message (@code{message-send}).
@item C-c C-d
@kindex C-c C-d
@item message-generate-headers-first
@vindex message-generate-headers-first
If non-@code{nil}, generate all headers before starting to compose the
-message.
+message.
@item message-from-style
@vindex message-from-style
generated @code{Message-ID} is deleted, and a new one generated. If
this isn't done, the entire empire would probably crumble, anarchy would
prevail, and cats would start walking on two legs and rule the world.
-Allegedly.
+Allegedly.
@item message-default-headers
@vindex message-default-headers
set this variable to a regexp that matches these prefixes. Myself, I
just throw away non-compliant mail.
+@item message-alternative-emails
+@vindex message-alternative-emails
+A regexp to match the alternative email addresses. The first matched
+address (not primary one) is used in the @code{From} field.
+
@end table
@node Mail Variables
-@section Mail Variables
+@section Mail Variables
@table @code
@item message-send-mail-function
@item Subject
@cindex Subject
-This required header will be prompted for if not present already.
+This required header will be prompted for if not present already.
@item Newsgroups
@cindex Newsgroups
@findex system-name
@cindex Sun
This required header will be generated by Message. A unique ID will be
-created based on the date, time, user name and system name. Message will
-use @code{mail-host-address} as the fully qualified domain name (FQDN)
-of the machine if that variable is defined. If not, it will use
-@code{system-name}, which doesn't report a FQDN on some machines --
-notably Suns.
+created based on the date, time, user name and system name. Message
+will use @code{system-name} to determine the name of the system. If
+this isn't a fully qualified domain name (FQDN), Message will use
+@code{mail-host-address} as the FQDN of the machine.
@item X-Newsreader
@cindex X-Newsreader
Valid checks are:
@table @code
-@item subject-cmsg
+@item subject-cmsg
Check the subject for commands.
@item sender
@cindex Sender
-Insert a new @code{Sender} header if the @code{From} header looks odd.
-@item multiple-headers
+Insert a new @code{Sender} header if the @code{From} header looks odd.
+@item multiple-headers
Check for the existence of multiple equal headers.
-@item sendsys
+@item sendsys
@cindex sendsys
Check for the existence of version and sendsys commands.
@item message-id
Check whether the @code{Message-ID} looks ok.
@item from
Check whether the @code{From} header seems nice.
-@item long-lines
+@item long-lines
@cindex long lines
Check for too long lines.
@item control-chars
@item empty-headers
Check whether any of the headers are empty.
@item existing-newsgroups
-Check whether the newsgroups mentioned in the @code{Newsgroups} and
+Check whether the newsgroups mentioned in the @code{Newsgroups} and
@code{Followup-To} headers exist.
@item valid-newsgroups
Check whether the @code{Newsgroups} and @code{Followup-to} headers
@item message-send-news-function
@vindex message-send-news-function
Function used to send the current buffer as news. The default is
-@code{message-send-news}.
+@code{message-send-news}.
@item message-post-method
@vindex message-post-method
@section Various Message Variables
@table @code
+@item message-default-charset
+@vindex message-default-charset
+@cindex charset
+Symbol naming a @sc{mime} charset. Non-ASCII characters in messages are
+assumed to be encoded using this charset. The default is @code{nil},
+which means ask the user. (This variable is used only on non-@sc{mule}
+Emacsen.
+@xref{Charset Translation, , Charset Translation, emacs-mime,
+ Emacs MIME Manual}, for details on the @sc{mule}-to-@sc{mime}
+translation process.
+
@item message-signature-separator
@vindex message-signature-separator
Regexp matching the signature separator. It is @samp{^-- *$} by
-default.
+default.
@item mail-header-separator
@vindex mail-header-separator
@item message-directory
@vindex message-directory
-Directory used by many mailey things. The default is @file{~/Mail/}.
+Directory used by many mailey things. The default is @file{~/Mail/}.
@item message-signature-setup-hook
@vindex message-signature-setup-hook
Hook run when initializing the message buffer. It is run after the
-headers have been inserted but before the signature has been inserted.
+headers have been inserted but before the signature has been inserted.
@item message-setup-hook
@vindex message-setup-hook
@item message-header-setup-hook
@vindex message-header-setup-hook
-Hook called narrowed to the headers after initializing the headers.
+Hook called narrowed to the headers after initializing the headers.
For instance, if you're running Gnus and wish to insert a
@samp{Mail-Copies-To} header in all your news articles and all messages
(add-hook 'message-send-hook 'my-message-add-content)
(defun my-message-add-content ()
(message-add-header
- "Mime-Version: 1.0"
- "Content-Type: text/plain"
- "Content-Transfer-Encoding: 7bit"))
+ "X-In-No-Sense: Nonsense"
+ "X-Whatever: no"))
@end lisp
This function won't add the header if the header is already present.
@table @code
-@item message-fcc-handler-function
-@vindex message-fcc-handler-function
+@item message-fcc-handler-function
+@vindex message-fcc-handler-function
A function called to save outgoing articles. This function will be
-called with the name of the file to store the article in. The default
+called with the name of the file to store the article in. The default
function is @code{message-output} which saves in Unix mailbox format.
@item message-courtesy-message
newsgroups the article has been posted to will be inserted there. If
this variable is @code{nil}, no such courtesy message will be added.
The default value is @samp{"The following message is a courtesy copy of
-an article\nthat has been posted to %s as well.\n\n"}.
+an article\nthat has been posted to %s as well.\n\n"}.
@end table
the to address and the group name. (Any of these may be @code{nil}.)
The function should return the new buffer name.
+@item message-use-multi-frames
+@vindex message-use-multi-frames
+If non-@code{nil}, generate new frames. The default is @code{nil}.
+
+@item message-delete-frame-on-exit
+@vindex message-delete-frame-on-exit
+The @code{message-delete-frame-on-exit} variable says whether to delete
+the frame after sending the message or killing the message buffer. If it
+is @code{nil} (which is the default), don't delete the frame. If it is
+@code{ask}, ask wheter to delete the frame. If it is @code{t}, always
+delete the frame.
+
@item message-max-buffers
@vindex message-max-buffers
This variable says how many old message buffers to keep. If there are
When Message is being used from a news/mail reader, the reader is likely
to want to perform some task after the message has been sent. Perhaps
return to the previous window configuration or mark an article as
-replied.
+replied.
@vindex message-kill-actions
@vindex message-postpone-actions
and @kbd{C-c C-k} which kills the message buffer. Each of these actions
have lists associated with them that contains actions to be executed:
@code{message-send-actions}, @code{message-exit-actions},
-@code{message-postpone-actions}, and @code{message-kill-actions}.
+@code{message-postpone-actions}, and @code{message-kill-actions}.
Message provides a function to interface with these lists:
@code{message-add-action}. The first parameter is the action to be
projects / elisp / gnus.git- / blobdiff