+++ /dev/null
-\input texinfo @c -*-texinfo-*-
-
-@setfilename gnus
-@settitle Pterodactyl Gnus 0.56 Manual
-@synindex fn cp
-@synindex vr cp
-@synindex pg cp
-@c @direntry
-@c * Gnus: (gnus). The newsreader Gnus.
-@c @end direntry
-@iftex
-@finalout
-@end iftex
-@setchapternewpage odd
-
-@iftex
-@iflatex
-\documentclass[twoside,a4paper,openright,11pt]{book}
-\usepackage[latin1]{inputenc}
-\usepackage{pagestyle}
-\usepackage{epsfig}
-\usepackage{bembo}
-\usepackage{pixidx}
-
-\makeindex
-\begin{document}
-
-\newcommand{\gnuschaptername}{}
-\newcommand{\gnussectionname}{}
-
-\newcommand{\gnusbackslash}{/}
-
-\newcommand{\gnusxref}[1]{See ``#1'' on page \pageref{#1}}
-\newcommand{\gnuspxref}[1]{see ``#1'' on page \pageref{#1}}
-
-\newcommand{\gnuskindex}[1]{\index{#1}}
-\newcommand{\gnusindex}[1]{\index{#1}}
-
-\newcommand{\gnustt}[1]{{\fontfamily{pfu}\fontsize{10pt}{10}\selectfont #1}}
-\newcommand{\gnuscode}[1]{\gnustt{#1}}
-\newcommand{\gnussamp}[1]{``{\fontencoding{OT1}\fontfamily{pfu}\fontsize{10pt}{10}\selectfont #1}''}
-\newcommand{\gnuslisp}[1]{\gnustt{#1}}
-\newcommand{\gnuskbd}[1]{`\gnustt{#1}'}
-\newcommand{\gnusfile}[1]{`\gnustt{#1}'}
-\newcommand{\gnusdfn}[1]{\textit{#1}}
-\newcommand{\gnusi}[1]{\textit{#1}}
-\newcommand{\gnusstrong}[1]{\textbf{#1}}
-\newcommand{\gnusemph}[1]{\textit{#1}}
-\newcommand{\gnusvar}[1]{{\fontsize{10pt}{10}\selectfont\textsl{\textsf{#1}}}}
-\newcommand{\gnussc}[1]{\textsc{#1}}
-\newcommand{\gnustitle}[1]{{\huge\textbf{#1}}}
-\newcommand{\gnusauthor}[1]{{\large\textbf{#1}}}
-
-\newcommand{\gnusbullet}{{${\bullet}$}}
-\newcommand{\gnusdollar}{\$}
-\newcommand{\gnusampersand}{\&}
-\newcommand{\gnuspercent}{\%}
-\newcommand{\gnushash}{\#}
-\newcommand{\gnushat}{\symbol{"5E}}
-\newcommand{\gnusunderline}{\symbol{"5F}}
-\newcommand{\gnusnot}{$\neg$}
-\newcommand{\gnustilde}{\symbol{"7E}}
-\newcommand{\gnusless}{{$<$}}
-\newcommand{\gnusgreater}{{$>$}}
-\newcommand{\gnusbraceleft}{{$>$}}
-\newcommand{\gnusbraceright}{{$>$}}
-
-\newcommand{\gnushead}{\raisebox{-1cm}{\epsfig{figure=ps/gnus-head.eps,height=1cm}}}
-\newcommand{\gnusinteresting}{
-\marginpar[\mbox{}\hfill\gnushead]{\gnushead}
-}
-
-\newcommand{\gnuscleardoublepage}{\ifodd\count0\mbox{}\clearpage\thispagestyle{empty}\mbox{}\clearpage\else\clearpage\fi}
-
-\newcommand{\gnuspagechapter}[1]{
-{\mbox{}}
-}
-
-\newdimen{\gnusdimen}
-\gnusdimen 0pt
-
-\newcommand{\gnuschapter}[2]{
-\gnuscleardoublepage
-\ifdim \gnusdimen = 0pt\setcounter{page}{1}\pagestyle{gnus}\pagenumbering{arabic} \gnusdimen 1pt\fi
-\chapter{#2}
-\renewcommand{\gnussectionname}{}
-\renewcommand{\gnuschaptername}{#2}
-\thispagestyle{empty}
-\hspace*{-2cm}
-\begin{picture}(500,500)(0,0)
-\put(480,350){\makebox(0,0)[tr]{#1}}
-\put(40,300){\makebox(500,50)[bl]{{\Huge\bf{#2}}}}
-\end{picture}
-\clearpage
-}
-
-\newcommand{\gnusfigure}[3]{
-\begin{figure}
-\mbox{}\ifodd\count0\hspace*{-0.8cm}\else\hspace*{-3cm}\fi\begin{picture}(440,#2)
-#3
-\end{picture}
-\caption{#1}
-\end{figure}
-}
-
-\newcommand{\gnusicon}[1]{
-\marginpar[\mbox{}\hfill\raisebox{-1.5cm}{\epsfig{figure=tmp/#1-up.ps,height=1.5cm}}]{\raisebox{-1cm}{\epsfig{figure=tmp/#1-up.ps,height=1cm}}}
-}
-
-\newcommand{\gnuspicon}[1]{
-\margindex{\epsfig{figure=#1,width=2cm}}
-}
-
-\newcommand{\gnusxface}[2]{
-\margindex{\epsfig{figure=#1,width=1cm}\epsfig{figure=#2,width=1cm}}
-}
-
-\newcommand{\gnussmiley}[2]{
-\margindex{\makebox[2cm]{\hfill\epsfig{figure=#1,width=0.5cm}\hfill\epsfig{figure=#2,width=0.5cm}\hfill}}
-}
-
-\newcommand{\gnusitemx}[1]{\mbox{}\vspace*{-\itemsep}\vspace*{-\parsep}\item#1}
-
-\newcommand{\gnussection}[1]{
-\renewcommand{\gnussectionname}{#1}
-\section{#1}
-}
-
-\newenvironment{codelist}%
-{\begin{list}{}{
-}
-}{\end{list}}
-
-\newenvironment{kbdlist}%
-{\begin{list}{}{
-\labelwidth=0cm
-}
-}{\end{list}}
-
-\newenvironment{dfnlist}%
-{\begin{list}{}{
-}
-}{\end{list}}
-
-\newenvironment{stronglist}%
-{\begin{list}{}{
-}
-}{\end{list}}
-
-\newenvironment{samplist}%
-{\begin{list}{}{
-}
-}{\end{list}}
-
-\newenvironment{varlist}%
-{\begin{list}{}{
-}
-}{\end{list}}
-
-\newenvironment{emphlist}%
-{\begin{list}{}{
-}
-}{\end{list}}
-
-\newlength\gnusheadtextwidth
-\setlength{\gnusheadtextwidth}{\headtextwidth}
-\addtolength{\gnusheadtextwidth}{1cm}
-
-\newpagestyle{gnuspreamble}%
-{
-{
-\ifodd\count0
-{
-\hspace*{-0.23cm}\underline{\makebox[\gnusheadtextwidth]{\mbox{}}\textbf{\hfill\roman{page}}}
-}
-\else
-{
-\hspace*{-3.25cm}\underline{\makebox[\gnusheadtextwidth]{\textbf{\roman{page}\hfill\mbox{}}}
-}
-}
-\fi
-}
-}
-{
-\ifodd\count0
-\mbox{} \hfill
-\raisebox{-0.5cm}{\epsfig{figure=ps/gnus-big-logo.eps,height=1cm}}
-\else
-\raisebox{-0.5cm}{\epsfig{figure=ps/gnus-big-logo.eps,height=1cm}}
-\hfill \mbox{}
-\fi
-}
-
-\newpagestyle{gnusindex}%
-{
-{
-\ifodd\count0
-{
-\hspace*{-0.23cm}\underline{\makebox[\gnusheadtextwidth]{\textbf{\gnuschaptername\hfill\arabic{page}}}}
-}
-\else
-{
-\hspace*{-3.25cm}\underline{\makebox[\gnusheadtextwidth]{\textbf{\arabic{page}\hfill\gnuschaptername}}}
-}
-\fi
-}
-}
-{
-\ifodd\count0
-\mbox{} \hfill
-\raisebox{-0.5cm}{\epsfig{figure=ps/gnus-big-logo.eps,height=1cm}}
-\else
-\raisebox{-0.5cm}{\epsfig{figure=ps/gnus-big-logo.eps,height=1cm}}
-\hfill \mbox{}
-\fi
-}
-
-\newpagestyle{gnus}%
-{
-{
-\ifodd\count0
-{
-\makebox[12cm]{\hspace*{3.1cm}\underline{\makebox[\gnusheadtextwidth]{\textbf{\arabic{chapter}.\arabic{section}} \textbf{\gnussectionname\hfill\arabic{page}}}}}
-}
-\else
-{
-\makebox[12cm]{\hspace*{-2.95cm}\underline{\makebox[\gnusheadtextwidth]{\textbf{\arabic{page}\hfill\gnuschaptername}}}}
-}
-\fi
-}
-}
-{
-\ifodd\count0
-\mbox{} \hfill
-\raisebox{-0.5cm}{\epsfig{figure=ps/gnus-big-logo.eps,height=1cm}}
-\else
-\raisebox{-0.5cm}{\epsfig{figure=ps/gnus-big-logo.eps,height=1cm}}
-\hfill \mbox{}
-\fi
-}
-
-\pagenumbering{roman}
-\pagestyle{gnuspreamble}
-
-@end iflatex
-@end iftex
-
-@iftex
-@iflatex
-\begin{titlepage}
-{
-
-%\addtolength{\oddsidemargin}{-5cm}
-%\addtolength{\evensidemargin}{-5cm}
-\parindent=0cm
-\addtolength{\textheight}{2cm}
-
-\gnustitle{\gnustitlename}\\
-\rule{15cm}{1mm}\\
-\vfill
-\hspace*{0cm}\epsfig{figure=ps/gnus-big-logo.eps,height=15cm}
-\vfill
-\rule{15cm}{1mm}\\
-\gnusauthor{by Lars Magne Ingebrigtsen}
-\newpage
-}
-
-\mbox{}
-\vfill
-
-\thispagestyle{empty}
-
-Copyright \copyright{} 1995,96,97,98 Free Software Foundation, Inc.
-
-Permission is granted to make and distribute verbatim copies of
-this manual provided the copyright notice and this permission notice
-are preserved on all copies.
-
-Permission is granted to copy and distribute modified versions of this
-manual under the conditions for verbatim copying, provided that the
-entire resulting derived work is distributed under the terms of a
-permission notice identical to this one.
-
-Permission is granted to copy and distribute translations of this manual
-into another language, under the above conditions for modified versions.
-
-\newpage
-\end{titlepage}
-@end iflatex
-@end iftex
-
-@ifinfo
-
-This file documents Gnus, the GNU Emacs newsreader.
-
-Copyright (C) 1995,96 Free Software Foundation, Inc.
-
-Permission is granted to make and distribute verbatim copies of
-this manual provided the copyright notice and this permission notice
-are preserved on all copies.
-
-@ignore
-Permission is granted to process this file through Tex and print the
-results, provided the printed document carries copying permission
-notice identical to this one except for the removal of this paragraph
-(this paragraph not being relevant to the printed manual).
-
-@end ignore
-Permission is granted to copy and distribute modified versions of this
-manual under the conditions for verbatim copying, provided also that the
-entire resulting derived work is distributed under the terms of a
-permission notice identical to this one.
-
-Permission is granted to copy and distribute translations of this manual
-into another language, under the above conditions for modified versions.
-@end ifinfo
-
-@tex
-
-@titlepage
-@title Pterodactyl Gnus 0.56 Manual
-
-@author by Lars Magne Ingebrigtsen
-@page
-
-@vskip 0pt plus 1filll
-Copyright @copyright{} 1995,96,97 Free Software Foundation, Inc.
-
-Permission is granted to make and distribute verbatim copies of
-this manual provided the copyright notice and this permission notice
-are preserved on all copies.
-
-Permission is granted to copy and distribute modified versions of this
-manual under the conditions for verbatim copying, provided that the
-entire resulting derived work is distributed under the terms of a
-permission notice identical to this one.
-
-Permission is granted to copy and distribute translations of this manual
-into another language, under the above conditions for modified versions.
-
-@end titlepage
-@page
-
-@end tex
-
-
-@node Top
-@top The Gnus Newsreader
-
-@ifinfo
-
-You can read news (and mail) from within Emacs by using Gnus. The news
-can be gotten by any nefarious means you can think of---@sc{nntp}, local
-spool or your mbox file. All at the same time, if you want to push your
-luck.
-
-This manual corresponds to Pterodactyl Gnus 0.56.
-
-@end ifinfo
-
-@iftex
-
-@iflatex
-\tableofcontents
-\gnuscleardoublepage
-@end iflatex
-
-Gnus is the advanced, self-documenting, customizable, extensible
-unreal-time newsreader for GNU Emacs.
-
-Oops. That sounds oddly familiar, so let's start over again to avoid
-being accused of plagiarism:
-
-Gnus is a message-reading laboratory. It will let you look at just
-about anything as if it were a newsgroup. You can read mail with it,
-you can browse directories with it, you can @code{ftp} with it---you can
-even read news with it!
-
-Gnus tries to empower people who read news the same way Emacs empowers
-people who edit text. Gnus sets no limits to what the user should be
-allowed to do. Users are encouraged to extend Gnus to make it behave
-like they want it to behave. A program should not control people;
-people should be empowered to do what they want by using (or abusing)
-the program.
-
-@end iftex
-
-
-@menu
-* Starting Up:: Finding news can be a pain.
-* The Group Buffer:: Selecting, subscribing and killing groups.
-* The Summary Buffer:: Reading, saving and posting articles.
-* The Article Buffer:: Displaying and handling articles.
-* Composing Messages:: Information on sending mail and news.
-* Select Methods:: Gnus reads all messages from various select methods.
-* Scoring:: Assigning values to articles.
-* Various:: General purpose settings.
-* The End:: Farewell and goodbye.
-* Appendices:: Terminology, Emacs intro, FAQ, History, Internals.
-* Index:: Variable, function and concept index.
-* Key Index:: Key Index.
-@end menu
-
-@node Starting Up
-@chapter Starting Gnus
-@cindex starting up
-
-@kindex M-x gnus
-@findex gnus
-If your system administrator has set things up properly, starting Gnus
-and reading news is extremely easy---you just type @kbd{M-x gnus} in
-your Emacs.
-
-@findex gnus-other-frame
-@kindex M-x gnus-other-frame
-If you want to start Gnus in a different frame, you can use the command
-@kbd{M-x gnus-other-frame} instead.
-
-If things do not go smoothly at startup, you have to twiddle some
-variables in your @file{~/.gnus} file. This file is similar to
-@file{~/.emacs}, but is read when gnus starts.
-
-If you puzzle at any terms used in this manual, please refer to the
-terminology section (@pxref{Terminology}).
-
-@menu
-* Finding the News:: Choosing a method for getting news.
-* The First Time:: What does Gnus do the first time you start it?
-* The Server is Down:: How can I read my mail then?
-* Slave Gnusae:: You can have more than one Gnus active at a time.
-* Fetching a Group:: Starting Gnus just to read a group.
-* New Groups:: What is Gnus supposed to do with new groups?
-* Startup Files:: Those pesky startup files---@file{.newsrc}.
-* Auto Save:: Recovering from a crash.
-* The Active File:: Reading the active file over a slow line Takes Time.
-* Changing Servers:: You may want to move from one server to another.
-* Startup Variables:: Other variables you might change.
-@end menu
-
-
-@node Finding the News
-@section Finding the News
-@cindex finding news
-
-@vindex gnus-select-method
-@c @head
-The @code{gnus-select-method} variable says where Gnus should look for
-news. This variable should be a list where the first element says
-@dfn{how} and the second element says @dfn{where}. This method is your
-native method. All groups not fetched with this method are
-foreign groups.
-
-For instance, if the @samp{news.somewhere.edu} @sc{nntp} server is where
-you want to get your daily dosage of news from, you'd say:
-
-@lisp
-(setq gnus-select-method '(nntp "news.somewhere.edu"))
-@end lisp
-
-If you want to read directly from the local spool, say:
-
-@lisp
-(setq gnus-select-method '(nnspool ""))
-@end lisp
-
-If you can use a local spool, you probably should, as it will almost
-certainly be much faster.
-
-@vindex gnus-nntpserver-file
-@cindex NNTPSERVER
-@cindex @sc{nntp} server
-If this variable is not set, Gnus will take a look at the
-@code{NNTPSERVER} environment variable. If that variable isn't set,
-Gnus will see whether @code{gnus-nntpserver-file}
-(@file{/etc/nntpserver} by default) has any opinions on the matter. If
-that fails as well, Gnus will try to use the machine running Emacs as an @sc{nntp} server. That's a long shot, though.
-
-@vindex gnus-nntp-server
-If @code{gnus-nntp-server} is set, this variable will override
-@code{gnus-select-method}. You should therefore set
-@code{gnus-nntp-server} to @code{nil}, which is what it is by default.
-
-@vindex gnus-secondary-servers
-@vindex gnus-nntp-server
-You can also make Gnus prompt you interactively for the name of an
-@sc{nntp} server. If you give a non-numerical prefix to @code{gnus}
-(i.e., @kbd{C-u M-x gnus}), Gnus will let you choose between the servers
-in the @code{gnus-secondary-servers} list (if any). You can also just
-type in the name of any server you feel like visiting. (Note that this
-will set @code{gnus-nntp-server}, which means that if you then @kbd{M-x
-gnus} later in the same Emacs session, Gnus will contact the same
-server.)
-
-@findex gnus-group-browse-foreign-server
-@kindex B (Group)
-However, if you use one @sc{nntp} server regularly and are just
-interested in a couple of groups from a different server, you would be
-better served by using the @kbd{B} command in the group buffer. It will
-let you have a look at what groups are available, and you can subscribe
-to any of the groups you want to. This also makes @file{.newsrc}
-maintenance much tidier. @xref{Foreign Groups}.
-
-@vindex gnus-secondary-select-methods
-@c @head
-A slightly different approach to foreign groups is to set the
-@code{gnus-secondary-select-methods} variable. The select methods
-listed in this variable are in many ways just as native as the
-@code{gnus-select-method} server. They will also be queried for active
-files during startup (if that's required), and new newsgroups that
-appear on these servers will be subscribed (or not) just as native
-groups are.
-
-For instance, if you use the @code{nnmbox} backend to read your mail, you
-would typically set this variable to
-
-@lisp
-(setq gnus-secondary-select-methods '((nnmbox "")))
-@end lisp
-
-
-@node The First Time
-@section The First Time
-@cindex first time usage
-
-If no startup files exist, Gnus will try to determine what groups should
-be subscribed by default.
-
-@vindex gnus-default-subscribed-newsgroups
-If the variable @code{gnus-default-subscribed-newsgroups} is set, Gnus
-will subscribe you to just those groups in that list, leaving the rest
-killed. Your system administrator should have set this variable to
-something useful.
-
-Since she hasn't, Gnus will just subscribe you to a few arbitrarily
-picked groups (i.e., @samp{*.newusers}). (@dfn{Arbitrary} is defined
-here as @dfn{whatever Lars thinks you should read}.)
-
-You'll also be subscribed to the Gnus documentation group, which should
-help you with most common problems.
-
-If @code{gnus-default-subscribed-newsgroups} is @code{t}, Gnus will just
-use the normal functions for handling new groups, and not do anything
-special.
-
-
-@node The Server is Down
-@section The Server is Down
-@cindex server errors
-
-If the default server is down, Gnus will understandably have some
-problems starting. However, if you have some mail groups in addition to
-the news groups, you may want to start Gnus anyway.
-
-Gnus, being the trusting sort of program, will ask whether to proceed
-without a native select method if that server can't be contacted. This
-will happen whether the server doesn't actually exist (i.e., you have
-given the wrong address) or the server has just momentarily taken ill
-for some reason or other. If you decide to continue and have no foreign
-groups, you'll find it difficult to actually do anything in the group
-buffer. But, hey, that's your problem. Blllrph!
-
-@findex gnus-no-server
-@kindex M-x gnus-no-server
-@c @head
-If you know that the server is definitely down, or you just want to read
-your mail without bothering with the server at all, you can use the
-@code{gnus-no-server} command to start Gnus. That might come in handy
-if you're in a hurry as well. This command will not attempt to contact
-your primary server---instead, it will just activate all groups on level
-1 and 2. (You should preferably keep no native groups on those two
-levels.)
-
-
-@node Slave Gnusae
-@section Slave Gnusae
-@cindex slave
-
-You might want to run more than one Emacs with more than one Gnus at the
-same time. If you are using different @file{.newsrc} files (e.g., if you
-are using the two different Gnusae to read from two different servers),
-that is no problem whatsoever. You just do it.
-
-The problem appears when you want to run two Gnusae that use the same
-@code{.newsrc} file.
-
-To work around that problem some, we here at the Think-Tank at the Gnus
-Towers have come up with a new concept: @dfn{Masters} and
-@dfn{slaves}. (We have applied for a patent on this concept, and have
-taken out a copyright on those words. If you wish to use those words in
-conjunction with each other, you have to send $1 per usage instance to
-me. Usage of the patent (@dfn{Master/Slave Relationships In Computer
-Applications}) will be much more expensive, of course.)
-
-Anyways, you start one Gnus up the normal way with @kbd{M-x gnus} (or
-however you do it). Each subsequent slave Gnusae should be started with
-@kbd{M-x gnus-slave}. These slaves won't save normal @file{.newsrc}
-files, but instead save @dfn{slave files} that contain information only
-on what groups have been read in the slave session. When a master Gnus
-starts, it will read (and delete) these slave files, incorporating all
-information from them. (The slave files will be read in the sequence
-they were created, so the latest changes will have precedence.)
-
-Information from the slave files has, of course, precedence over the
-information in the normal (i.e., master) @code{.newsrc} file.
-
-
-@node Fetching a Group
-@section Fetching a Group
-@cindex fetching a group
-
-@findex gnus-fetch-group
-It is sometimes convenient to be able to just say ``I want to read this
-group and I don't care whether Gnus has been started or not''. This is
-perhaps more useful for people who write code than for users, but the
-command @code{gnus-fetch-group} provides this functionality in any case.
-It takes the group name as a parameter.
-
-
-@node New Groups
-@section New Groups
-@cindex new groups
-@cindex subscription
-
-@vindex gnus-check-new-newsgroups
-If you are satisfied that you really never want to see any new groups,
-you can set @code{gnus-check-new-newsgroups} to @code{nil}. This will
-also save you some time at startup. Even if this variable is
-@code{nil}, you can always subscribe to the new groups just by pressing
-@kbd{U} in the group buffer (@pxref{Group Maintenance}). This variable
-is @code{ask-server} by default. If you set this variable to
-@code{always}, then Gnus will query the backends for new groups even
-when you do the @kbd{g} command (@pxref{Scanning New Messages}).
-
-@menu
-* Checking New Groups:: Determining what groups are new.
-* Subscription Methods:: What Gnus should do with new groups.
-* Filtering New Groups:: Making Gnus ignore certain new groups.
-@end menu
-
-
-@node Checking New Groups
-@subsection Checking New Groups
-
-Gnus normally determines whether a group is new or not by comparing the
-list of groups from the active file(s) with the lists of subscribed and
-dead groups. This isn't a particularly fast method. If
-@code{gnus-check-new-newsgroups} is @code{ask-server}, Gnus will ask the
-server for new groups since the last time. This is both faster and
-cheaper. This also means that you can get rid of the list of killed
-groups altogether, so you may set @code{gnus-save-killed-list} to
-@code{nil}, which will save time both at startup, at exit, and all over.
-Saves disk space, too. Why isn't this the default, then?
-Unfortunately, not all servers support this command.
-
-I bet I know what you're thinking now: How do I find out whether my
-server supports @code{ask-server}? No? Good, because I don't have a
-fail-safe answer. I would suggest just setting this variable to
-@code{ask-server} and see whether any new groups appear within the next
-few days. If any do, then it works. If none do, then it doesn't
-work. I could write a function to make Gnus guess whether the server
-supports @code{ask-server}, but it would just be a guess. So I won't.
-You could @code{telnet} to the server and say @code{HELP} and see
-whether it lists @samp{NEWGROUPS} among the commands it understands. If
-it does, then it might work. (But there are servers that lists
-@samp{NEWGROUPS} without supporting the function properly.)
-
-This variable can also be a list of select methods. If so, Gnus will
-issue an @code{ask-server} command to each of the select methods, and
-subscribe them (or not) using the normal methods. This might be handy
-if you are monitoring a few servers for new groups. A side effect is
-that startup will take much longer, so you can meditate while waiting.
-Use the mantra ``dingnusdingnusdingnus'' to achieve permanent bliss.
-
-
-@node Subscription Methods
-@subsection Subscription Methods
-
-@vindex gnus-subscribe-newsgroup-method
-What Gnus does when it encounters a new group is determined by the
-@code{gnus-subscribe-newsgroup-method} variable.
-
-This variable should contain a function. This function will be called
-with the name of the new group as the only parameter.
-
-Some handy pre-fab functions are:
-
-@table @code
-
-@item gnus-subscribe-zombies
-@vindex gnus-subscribe-zombies
-Make all new groups zombies. This is the default. You can browse the
-zombies later (with @kbd{A z}) and either kill them all off properly
-(with @kbd{S z}), or subscribe to them (with @kbd{u}).
-
-@item gnus-subscribe-randomly
-@vindex gnus-subscribe-randomly
-Subscribe all new groups in arbitrary order. This really means that all
-new groups will be added at ``the top'' of the group buffer.
-
-@item gnus-subscribe-alphabetically
-@vindex gnus-subscribe-alphabetically
-Subscribe all new groups in alphabetical order.
-
-@item gnus-subscribe-hierarchically
-@vindex gnus-subscribe-hierarchically
-Subscribe all new groups hierarchically. The difference between this
-function and @code{gnus-subscribe-alphabetically} is slight.
-@code{gnus-subscribe-alphabetically} will subscribe new groups in a strictly
-alphabetical fashion, while this function will enter groups into it's
-hierarchy. So if you want to have the @samp{rec} hierarchy before the
-@samp{comp} hierarchy, this function will not mess that configuration
-up. Or something like that.
-
-@item gnus-subscribe-interactively
-@vindex gnus-subscribe-interactively
-Subscribe new groups interactively. This means that Gnus will ask
-you about @strong{all} new groups. The groups you choose to subscribe
-to will be subscribed hierarchically.
-
-@item gnus-subscribe-killed
-@vindex gnus-subscribe-killed
-Kill all new groups.
-
-@end table
-
-@vindex gnus-subscribe-hierarchical-interactive
-A closely related variable is
-@code{gnus-subscribe-hierarchical-interactive}. (That's quite a
-mouthful.) If this variable is non-@code{nil}, Gnus will ask you in a
-hierarchical fashion whether to subscribe to new groups or not. Gnus
-will ask you for each sub-hierarchy whether you want to descend the
-hierarchy or not.
-
-One common mistake is to set the variable a few paragraphs above
-(@code{gnus-subscribe-newsgroup-method}) to
-@code{gnus-subscribe-hierarchical-interactive}. This is an error. This
-will not work. This is ga-ga. So don't do it.
-
-
-@node Filtering New Groups
-@subsection Filtering New Groups
-
-A nice and portable way to control which new newsgroups should be
-subscribed (or ignored) is to put an @dfn{options} line at the start of
-the @file{.newsrc} file. Here's an example:
-
-@example
-options -n !alt.all !rec.all sci.all
-@end example
-
-@vindex gnus-subscribe-options-newsgroup-method
-This line obviously belongs to a serious-minded intellectual scientific
-person (or she may just be plain old boring), because it says that all
-groups that have names beginning with @samp{alt} and @samp{rec} should
-be ignored, and all groups with names beginning with @samp{sci} should
-be subscribed. Gnus will not use the normal subscription method for
-subscribing these groups.
-@code{gnus-subscribe-options-newsgroup-method} is used instead. This
-variable defaults to @code{gnus-subscribe-alphabetically}.
-
-@vindex gnus-options-not-subscribe
-@vindex gnus-options-subscribe
-If you don't want to mess with your @file{.newsrc} file, you can just
-set the two variables @code{gnus-options-subscribe} and
-@code{gnus-options-not-subscribe}. These two variables do exactly the
-same as the @file{.newsrc} @samp{options -n} trick. Both are regexps,
-and if the new group matches the former, it will be unconditionally
-subscribed, and if it matches the latter, it will be ignored.
-
-@vindex gnus-auto-subscribed-groups
-Yet another variable that meddles here is
-@code{gnus-auto-subscribed-groups}. It works exactly like
-@code{gnus-options-subscribe}, and is therefore really superfluous, but I
-thought it would be nice to have two of these. This variable is more
-meant for setting some ground rules, while the other variable is used
-more for user fiddling. By default this variable makes all new groups
-that come from mail backends (@code{nnml}, @code{nnbabyl},
-@code{nnfolder}, @code{nnmbox}, and @code{nnmh}) subscribed. If you
-don't like that, just set this variable to @code{nil}.
-
-New groups that match this regexp are subscribed using
-@code{gnus-subscribe-options-newsgroup-method}.
-
-
-@node Changing Servers
-@section Changing Servers
-@cindex changing servers
-
-Sometimes it is necessary to move from one @sc{nntp} server to another.
-This happens very rarely, but perhaps you change jobs, or one server is
-very flaky and you want to use another.
-
-Changing the server is pretty easy, right? You just change
-@code{gnus-select-method} to point to the new server?
-
-@emph{Wrong!}
-
-Article numbers are not (in any way) kept synchronized between different
-@sc{nntp} servers, and the only way Gnus keeps track of what articles
-you have read is by keeping track of article numbers. So when you
-change @code{gnus-select-method}, your @file{.newsrc} file becomes
-worthless.
-
-Gnus provides a few functions to attempt to translate a @file{.newsrc}
-file from one server to another. They all have one thing in
-common---they take a looong time to run. You don't want to use these
-functions more than absolutely necessary.
-
-@kindex M-x gnus-change-server
-@findex gnus-change-server
-If you have access to both servers, Gnus can request the headers for all
-the articles you have read and compare @code{Message-ID}s and map the
-article numbers of the read articles and article marks. The @kbd{M-x
-gnus-change-server} command will do this for all your native groups. It
-will prompt for the method you want to move to.
-
-@kindex M-x gnus-group-move-group-to-server
-@findex gnus-group-move-group-to-server
-You can also move individual groups with the @kbd{M-x
-gnus-group-move-group-to-server} command. This is useful if you want to
-move a (foreign) group from one server to another.
-
-@kindex M-x gnus-group-clear-data-on-native-groups
-@findex gnus-group-clear-data-on-native-groups
-If you don't have access to both the old and new server, all your marks
-and read ranges have become worthless. You can use the @kbd{M-x
-gnus-group-clear-data-on-native-groups} command to clear out all data
-that you have on your native groups. Use with caution.
-
-After changing servers, you @strong{must} move the cache hierarchy away,
-since the cached articles will have wrong article numbers, which will
-affect which articles Gnus thinks are read.
-
-
-@node Startup Files
-@section Startup Files
-@cindex startup files
-@cindex .newsrc
-@cindex .newsrc.el
-@cindex .newsrc.eld
-
-Now, you all know about the @file{.newsrc} file. All subscription
-information is traditionally stored in this file.
-
-Things got a bit more complicated with @sc{gnus}. In addition to
-keeping the @file{.newsrc} file updated, it also used a file called
-@file{.newsrc.el} for storing all the information that didn't fit into
-the @file{.newsrc} file. (Actually, it also duplicated everything in
-the @file{.newsrc} file.) @sc{gnus} would read whichever one of these
-files was the most recently saved, which enabled people to swap between
-@sc{gnus} and other newsreaders.
-
-That was kinda silly, so Gnus went one better: In addition to the
-@file{.newsrc} and @file{.newsrc.el} files, Gnus also has a file called
-@file{.newsrc.eld}. It will read whichever of these files that are most
-recent, but it will never write a @file{.newsrc.el} file. You should
-never delete the @file{.newsrc.eld} file---it contains much information
-not stored in the @file{.newsrc} file.
-
-@vindex gnus-save-newsrc-file
-You can turn off writing the @file{.newsrc} file by setting
-@code{gnus-save-newsrc-file} to @code{nil}, which means you can delete
-the file and save some space, as well as exiting from Gnus faster.
-However, this will make it impossible to use other newsreaders than
-Gnus. But hey, who would want to, right?
-
-@vindex gnus-save-killed-list
-If @code{gnus-save-killed-list} (default @code{t}) is @code{nil}, Gnus
-will not save the list of killed groups to the startup file. This will
-save both time (when starting and quitting) and space (on disk). It
-will also mean that Gnus has no record of what groups are new or old,
-so the automatic new groups subscription methods become meaningless.
-You should always set @code{gnus-check-new-newsgroups} to @code{nil} or
-@code{ask-server} if you set this variable to @code{nil} (@pxref{New
-Groups}). This variable can also be a regular expression. If that's
-the case, remove all groups that do not match this regexp before
-saving. This can be useful in certain obscure situations that involve
-several servers where not all servers support @code{ask-server}.
-
-@vindex gnus-startup-file
-The @code{gnus-startup-file} variable says where the startup files are.
-The default value is @file{~/.newsrc}, with the Gnus (El Dingo) startup
-file being whatever that one is, with a @samp{.eld} appended.
-
-@vindex gnus-save-newsrc-hook
-@vindex gnus-save-quick-newsrc-hook
-@vindex gnus-save-standard-newsrc-hook
-@code{gnus-save-newsrc-hook} is called before saving any of the newsrc
-files, while @code{gnus-save-quick-newsrc-hook} is called just before
-saving the @file{.newsrc.eld} file, and
-@code{gnus-save-standard-newsrc-hook} is called just before saving the
-@file{.newsrc} file. The latter two are commonly used to turn version
-control on or off. Version control is on by default when saving the
-startup files. If you want to turn backup creation off, say something like:
-
-@lisp
-(defun turn-off-backup ()
- (set (make-local-variable 'backup-inhibited) t))
-
-(add-hook 'gnus-save-quick-newsrc-hook 'turn-off-backup)
-(add-hook 'gnus-save-standard-newsrc-hook 'turn-off-backup)
-@end lisp
-
-@vindex gnus-init-file
-When Gnus starts, it will read the @code{gnus-site-init-file}
-(@file{.../site-lisp/gnus} by default) and @code{gnus-init-file}
-(@file{~/.gnus} by default) files. These are normal Emacs Lisp files
-and can be used to avoid cluttering your @file{~/.emacs} and
-@file{site-init} files with Gnus stuff. Gnus will also check for files
-with the same names as these, but with @file{.elc} and @file{.el}
-suffixes. In other words, if you have set @code{gnus-init-file} to
-@file{~/.gnus}, it will look for @file{~/.gnus.elc}, @file{~/.gnus.el},
-and finally @file{~/.gnus} (in this order).
-
-
-
-@node Auto Save
-@section Auto Save
-@cindex dribble file
-@cindex auto-save
-
-Whenever you do something that changes the Gnus data (reading articles,
-catching up, killing/subscribing groups), the change is added to a
-special @dfn{dribble buffer}. This buffer is auto-saved the normal
-Emacs way. If your Emacs should crash before you have saved the
-@file{.newsrc} files, all changes you have made can be recovered from
-this file.
-
-If Gnus detects this file at startup, it will ask the user whether to
-read it. The auto save file is deleted whenever the real startup file is
-saved.
-
-@vindex gnus-use-dribble-file
-If @code{gnus-use-dribble-file} is @code{nil}, Gnus won't create and
-maintain a dribble buffer. The default is @code{t}.
-
-@vindex gnus-dribble-directory
-Gnus will put the dribble file(s) in @code{gnus-dribble-directory}. If
-this variable is @code{nil}, which it is by default, Gnus will dribble
-into the directory where the @file{.newsrc} file is located. (This is
-normally the user's home directory.) The dribble file will get the same
-file permissions as the @code{.newsrc} file.
-
-@vindex gnus-always-read-dribble-file
-If @code{gnus-always-read-dribble-file} is non-@code{nil}, Gnus will
-read the dribble file on startup without querying the user.
-
-
-@node The Active File
-@section The Active File
-@cindex active file
-@cindex ignored groups
-
-When Gnus starts, or indeed whenever it tries to determine whether new
-articles have arrived, it reads the active file. This is a very large
-file that lists all the active groups and articles on the server.
-
-@vindex gnus-ignored-newsgroups
-Before examining the active file, Gnus deletes all lines that match the
-regexp @code{gnus-ignored-newsgroups}. This is done primarily to reject
-any groups with bogus names, but you can use this variable to make Gnus
-ignore hierarchies you aren't ever interested in. However, this is not
-recommended. In fact, it's highly discouraged. Instead, @pxref{New
-Groups} for an overview of other variables that can be used instead.
-
-@c This variable is
-@c @code{nil} by default, and will slow down active file handling somewhat
-@c if you set it to anything else.
-
-@vindex gnus-read-active-file
-@c @head
-The active file can be rather Huge, so if you have a slow network, you
-can set @code{gnus-read-active-file} to @code{nil} to prevent Gnus from
-reading the active file. This variable is @code{some} by default.
-
-Gnus will try to make do by getting information just on the groups that
-you actually subscribe to.
-
-Note that if you subscribe to lots and lots of groups, setting this
-variable to @code{nil} will probably make Gnus slower, not faster. At
-present, having this variable @code{nil} will slow Gnus down
-considerably, unless you read news over a 2400 baud modem.
-
-This variable can also have the value @code{some}. Gnus will then
-attempt to read active info only on the subscribed groups. On some
-servers this is quite fast (on sparkling, brand new INN servers that
-support the @code{LIST ACTIVE group} command), on others this isn't fast
-at all. In any case, @code{some} should be faster than @code{nil}, and
-is certainly faster than @code{t} over slow lines.
-
-If this variable is @code{nil}, Gnus will ask for group info in total
-lock-step, which isn't very fast. If it is @code{some} and you use an
-@sc{nntp} server, Gnus will pump out commands as fast as it can, and
-read all the replies in one swoop. This will normally result in better
-performance, but if the server does not support the aforementioned
-@code{LIST ACTIVE group} command, this isn't very nice to the server.
-
-In any case, if you use @code{some} or @code{nil}, you should definitely
-kill all groups that you aren't interested in to speed things up.
-
-Note that this variable also affects active file retrieval from
-secondary select methods.
-
-
-@node Startup Variables
-@section Startup Variables
-
-@table @code
-
-@item gnus-load-hook
-@vindex gnus-load-hook
-A hook run while Gnus is being loaded. Note that this hook will
-normally be run just once in each Emacs session, no matter how many
-times you start Gnus.
-
-@item gnus-before-startup-hook
-@vindex gnus-before-startup-hook
-A hook run after starting up Gnus successfully.
-
-@item gnus-startup-hook
-@vindex gnus-startup-hook
-A hook run as the very last thing after starting up Gnus
-
-@item gnus-started-hook
-@vindex gnus-started-hook
-A hook that is run as the very last thing after starting up Gnus
-successfully.
-
-@item gnus-started-hook
-@vindex gnus-started-hook
-A hook that is run after reading the @file{.newsrc} file(s), but before
-generating the group buffer.
-
-@item gnus-check-bogus-newsgroups
-@vindex gnus-check-bogus-newsgroups
-If non-@code{nil}, Gnus will check for and delete all bogus groups at
-startup. A @dfn{bogus group} is a group that you have in your
-@file{.newsrc} file, but doesn't exist on the news server. Checking for
-bogus groups can take quite a while, so to save time and resources it's
-best to leave this option off, and do the checking for bogus groups once
-in a while from the group buffer instead (@pxref{Group Maintenance}).
-
-@item gnus-inhibit-startup-message
-@vindex gnus-inhibit-startup-message
-If non-@code{nil}, the startup message won't be displayed. That way,
-your boss might not notice as easily that you are reading news instead
-of doing your job. Note that this variable is used before
-@file{.gnus.el} is loaded, so it should be set in @code{.emacs} instead.
-
-@item gnus-no-groups-message
-@vindex gnus-no-groups-message
-Message displayed by Gnus when no groups are available.
-
-@item gnus-play-startup-jingle
-@vindex gnus-play-startup-jingle
-If non-@code{nil}, play the Gnus jingle at startup.
-
-@item gnus-startup-jingle
-@vindex gnus-startup-jingle
-Jingle to be played if the above variable is non-@code{nil}. The
-default is @samp{Tuxedomoon.Jingle4.au}.
-
-@end table
-
-
-@node The Group Buffer
-@chapter The Group Buffer
-@cindex group buffer
-
-The @dfn{group buffer} lists all (or parts) of the available groups. It
-is the first buffer shown when Gnus starts, and will never be killed as
-long as Gnus is active.
-
-@iftex
-@iflatex
-\gnusfigure{The Group Buffer}{320}{
-\put(75,50){\epsfig{figure=tmp/group.ps,height=9cm}}
-\put(120,37){\makebox(0,0)[t]{Buffer name}}
-\put(120,38){\vector(1,2){10}}
-\put(40,60){\makebox(0,0)[r]{Mode line}}
-\put(40,58){\vector(1,0){30}}
-\put(200,28){\makebox(0,0)[t]{Native select method}}
-\put(200,26){\vector(-1,2){15}}
-}
-@end iflatex
-@end iftex
-
-@menu
-* Group Buffer Format:: Information listed and how you can change it.
-* Group Maneuvering:: Commands for moving in the group buffer.
-* Selecting a Group:: Actually reading news.
-* Group Data:: Changing the info for a group.
-* Subscription Commands:: Unsubscribing, killing, subscribing.
-* Group Levels:: Levels? What are those, then?
-* Group Score:: A mechanism for finding out what groups you like.
-* Marking Groups:: You can mark groups for later processing.
-* Foreign Groups:: Creating and editing groups.
-* Group Parameters:: Each group may have different parameters set.
-* Listing Groups:: Gnus can list various subsets of the groups.
-* Sorting Groups:: Re-arrange the group order.
-* Group Maintenance:: Maintaining a tidy @file{.newsrc} file.
-* Browse Foreign Server:: You can browse a server. See what it has to offer.
-* Exiting Gnus:: Stop reading news and get some work done.
-* Group Topics:: A folding group mode divided into topics.
-* Misc Group Stuff:: Other stuff that you can to do.
-@end menu
-
-
-@node Group Buffer Format
-@section Group Buffer Format
-
-@menu
-* Group Line Specification:: Deciding how the group buffer is to look.
-* Group Modeline Specification:: The group buffer modeline.
-* Group Highlighting:: Having nice colors in the group buffer.
-@end menu
-
-
-@node Group Line Specification
-@subsection Group Line Specification
-@cindex group buffer format
-
-The default format of the group buffer is nice and dull, but you can
-make it as exciting and ugly as you feel like.
-
-Here's a couple of example group lines:
-
-@example
- 25: news.announce.newusers
- * 0: alt.fan.andrea-dworkin
-@end example
-
-Quite simple, huh?
-
-You can see that there are 25 unread articles in
-@samp{news.announce.newusers}. There are no unread articles, but some
-ticked articles, in @samp{alt.fan.andrea-dworkin} (see that little
-asterisk at the beginning of the line?).
-
-@vindex gnus-group-line-format
-You can change that format to whatever you want by fiddling with the
-@code{gnus-group-line-format} variable. This variable works along the
-lines of a @code{format} specification, which is pretty much the same as
-a @code{printf} specifications, for those of you who use (feh!) C.
-@xref{Formatting Variables}.
-
-@samp{%M%S%5y: %(%g%)\n} is the value that produced those lines above.
-
-There should always be a colon on the line; the cursor always moves to
-the colon after performing an operation. Nothing else is required---not
-even the group name. All displayed text is just window dressing, and is
-never examined by Gnus. Gnus stores all real information it needs using
-text properties.
-
-(Note that if you make a really strange, wonderful, spreadsheet-like
-layout, everybody will believe you are hard at work with the accounting
-instead of wasting time reading news.)
-
-Here's a list of all available format characters:
-
-@table @samp
-
-@item M
-An asterisk if the group only has marked articles.
-
-@item S
-Whether the group is subscribed.
-
-@item L
-Level of subscribedness.
-
-@item N
-Number of unread articles.
-
-@item I
-Number of dormant articles.
-
-@item T
-Number of ticked articles.
-
-@item R
-Number of read articles.
-
-@item t
-Estimated total number of articles. (This is really @var{max-number}
-minus @var{min-number} plus 1.)
-
-@item y
-Number of unread, unticked, non-dormant articles.
-
-@item i
-Number of ticked and dormant articles.
-
-@item g
-Full group name.
-
-@item G
-Group name.
-
-@item D
-Newsgroup description.
-
-@item o
-@samp{m} if moderated.
-
-@item O
-@samp{(m)} if moderated.
-
-@item s
-Select method.
-
-@item n
-Select from where.
-
-@item z
-A string that looks like @samp{<%s:%n>} if a foreign select method is
-used.
-
-@item P
-Indentation based on the level of the topic (@pxref{Group Topics}).
-
-@item c
-@vindex gnus-group-uncollapsed-levels
-Short (collapsed) group name. The @code{gnus-group-uncollapsed-levels}
-variable says how many levels to leave at the end of the group name.
-The default is 1---this will mean that group names like
-@samp{gnu.emacs.gnus} will be shortened to @samp{g.emacs.gnus}.
-
-@item m
-@vindex gnus-new-mail-mark
-@cindex %
-@samp{%} (@code{gnus-new-mail-mark}) if there has arrived new mail to
-the group lately.
-
-@item d
-A string that says when you last read the group (@pxref{Group
-Timestamp}).
-
-@item u
-User defined specifier. The next character in the format string should
-be a letter. Gnus will call the function
-@code{gnus-user-format-function-}@samp{X}, where @samp{X} is the letter
-following @samp{%u}. The function will be passed a single dummy
-parameter as argument. The function should return a string, which will
-be inserted into the buffer just like information from any other
-specifier.
-@end table
-
-@cindex *
-All the ``number-of'' specs will be filled with an asterisk (@samp{*})
-if no info is available---for instance, if it is a non-activated foreign
-group, or a bogus native group.
-
-
-@node Group Modeline Specification
-@subsection Group Modeline Specification
-@cindex group modeline
-
-@vindex gnus-group-mode-line-format
-The mode line can be changed by setting
-@code{gnus-group-mode-line-format} (@pxref{Mode Line Formatting}). It
-doesn't understand that many format specifiers:
-
-@table @samp
-@item S
-The native news server.
-@item M
-The native select method.
-@end table
-
-
-@node Group Highlighting
-@subsection Group Highlighting
-@cindex highlighting
-@cindex group highlighting
-
-@vindex gnus-group-highlight
-Highlighting in the group buffer is controlled by the
-@code{gnus-group-highlight} variable. This is an alist with elements
-that look like @var{(form . face)}. If @var{form} evaluates to
-something non-@code{nil}, the @var{face} will be used on the line.
-
-Here's an example value for this variable that might look nice if the
-background is dark:
-
-@lisp
-(face-spec-set 'my-group-face-1
- '((t (:foreground "Red" :bold t))))
-(face-spec-set 'my-group-face-2
- '((t (:foreground "SeaGreen" :bold t))))
-(face-spec-set 'my-group-face-3
- '((t (:foreground "SpringGreen" :bold t))))
-(face-spec-set 'my-group-face-4
- '((t (:foreground "SteelBlue" :bold t))))
-(face-spec-set 'my-group-face-5
- '((t (:foreground "SkyBlue" :bold t))))
-
-(setq gnus-group-highlight
- '(((> unread 200) . my-group-face-1)
- ((and (< level 3) (zerop unread)) . my-group-face-2)
- ((< level 3) . my-group-face-3)
- ((zerop unread) . my-group-face-4)
- (t . my-group-face-5)))
-@end lisp
-
-Also @pxref{Faces and Fonts}.
-
-Variables that are dynamically bound when the forms are evaluated
-include:
-
-@table @code
-@item group
-The group name.
-@item unread
-The number of unread articles in the group.
-@item method
-The select method.
-@item mailp
-Whether the group is a mail group.
-@item level
-The level of the group.
-@item score
-The score of the group.
-@item ticked
-The number of ticked articles in the group.
-@item total
-The total number of articles in the group. Or rather, MAX-NUMBER minus
-MIN-NUMBER plus one.
-@item topic
-When using the topic minor mode, this variable is bound to the current
-topic being inserted.
-@end table
-
-When the forms are @code{eval}ed, point is at the beginning of the line
-of the group in question, so you can use many of the normal Gnus
-functions for snarfing info on the group.
-
-@vindex gnus-group-update-hook
-@findex gnus-group-highlight-line
-@code{gnus-group-update-hook} is called when a group line is changed.
-It will not be called when @code{gnus-visual} is @code{nil}. This hook
-calls @code{gnus-group-highlight-line} by default.
-
-
-@node Group Maneuvering
-@section Group Maneuvering
-@cindex group movement
-
-All movement commands understand the numeric prefix and will behave as
-expected, hopefully.
-
-@table @kbd
-
-@item n
-@kindex n (Group)
-@findex gnus-group-next-unread-group
-Go to the next group that has unread articles
-(@code{gnus-group-next-unread-group}).
-
-@item p
-@itemx DEL
-@kindex DEL (Group)
-@kindex p (Group)
-@findex gnus-group-prev-unread-group
-Go to the previous group that has unread articles
-(@code{gnus-group-prev-unread-group}).
-
-@item N
-@kindex N (Group)
-@findex gnus-group-next-group
-Go to the next group (@code{gnus-group-next-group}).
-
-@item P
-@kindex P (Group)
-@findex gnus-group-prev-group
-Go to the previous group (@code{gnus-group-prev-group}).
-
-@item M-n
-@kindex M-n (Group)
-@findex gnus-group-next-unread-group-same-level
-Go to the next unread group on the same (or lower) level
-(@code{gnus-group-next-unread-group-same-level}).
-
-@item M-p
-@kindex M-p (Group)
-@findex gnus-group-prev-unread-group-same-level
-Go to the previous unread group on the same (or lower) level
-(@code{gnus-group-prev-unread-group-same-level}).
-@end table
-
-Three commands for jumping to groups:
-
-@table @kbd
-
-@item j
-@kindex j (Group)
-@findex gnus-group-jump-to-group
-Jump to a group (and make it visible if it isn't already)
-(@code{gnus-group-jump-to-group}). Killed groups can be jumped to, just
-like living groups.
-
-@item ,
-@kindex , (Group)
-@findex gnus-group-best-unread-group
-Jump to the unread group with the lowest level
-(@code{gnus-group-best-unread-group}).
-
-@item .
-@kindex . (Group)
-@findex gnus-group-first-unread-group
-Jump to the first group with unread articles
-(@code{gnus-group-first-unread-group}).
-@end table
-
-@vindex gnus-group-goto-unread
-If @code{gnus-group-goto-unread} is @code{nil}, all the movement
-commands will move to the next group, not the next unread group. Even
-the commands that say they move to the next unread group. The default
-is @code{t}.
-
-
-@node Selecting a Group
-@section Selecting a Group
-@cindex group selection
-
-@table @kbd
-
-@item SPACE
-@kindex SPACE (Group)
-@findex gnus-group-read-group
-Select the current group, switch to the summary buffer and display the
-first unread article (@code{gnus-group-read-group}). If there are no
-unread articles in the group, or if you give a non-numerical prefix to
-this command, Gnus will offer to fetch all the old articles in this
-group from the server. If you give a numerical prefix @var{N}, @var{N}
-determines the number of articles Gnus will fetch. If @var{N} is
-positive, Gnus fetches the @var{N} newest articles, if @var{N} is
-negative, Gnus fetches the @var{abs(N)} oldest articles.
-
-@item RET
-@kindex RET (Group)
-@findex gnus-group-select-group
-Select the current group and switch to the summary buffer
-(@code{gnus-group-select-group}). Takes the same arguments as
-@code{gnus-group-read-group}---the only difference is that this command
-does not display the first unread article automatically upon group
-entry.
-
-@item M-RET
-@kindex M-RET (Group)
-@findex gnus-group-quick-select-group
-This does the same as the command above, but tries to do it with the
-minimum amount of fuzz (@code{gnus-group-quick-select-group}). No
-scoring/killing will be performed, there will be no highlights and no
-expunging. This might be useful if you're in a real hurry and have to
-enter some humongous group. If you give a 0 prefix to this command
-(i.e., @kbd{0 M-RET}), Gnus won't even generate the summary buffer,
-which is useful if you want to toggle threading before generating the
-summary buffer (@pxref{Summary Generation Commands}).
-
-@item M-SPACE
-@kindex M-SPACE (Group)
-@findex gnus-group-visible-select-group
-This is yet one more command that does the same as the @kbd{RET}
-command, but this one does it without expunging and hiding dormants
-(@code{gnus-group-visible-select-group}).
-
-@item M-C-RET
-@kindex M-C-RET (Group)
-@findex gnus-group-select-group-ephemerally
-Finally, this command selects the current group ephemerally without
-doing any processing of its contents
-(@code{gnus-group-select-group-ephemerally}). Even threading has been
-turned off. Everything you do in the group after selecting it in this
-manner will have no permanent effects.
-
-@end table
-
-@vindex gnus-large-newsgroup
-The @code{gnus-large-newsgroup} variable says what Gnus should consider
-to be a big group. This is 200 by default. If the group has more
-(unread and/or ticked) articles than this, Gnus will query the user
-before entering the group. The user can then specify how many articles
-should be fetched from the server. If the user specifies a negative
-number (@code{-n}), the @code{n} oldest articles will be fetched. If it
-is positive, the @code{n} articles that have arrived most recently will
-be fetched.
-
-@vindex gnus-select-group-hook
-@vindex gnus-auto-select-first
-@code{gnus-auto-select-first} control whether any articles are selected
-automatically when entering a group with the @kbd{SPACE} command.
-
-@table @code
-
-@item nil
-Don't select any articles when entering the group. Just display the
-full summary buffer.
-
-@item t
-Select the first unread article when entering the group.
-
-@item best
-Select the highest scored article in the group when entering the
-group.
-
-@end table
-
-This variable can also be a function. In that case, that function will
-be called to place point on a subject line, and/or select some article.
-Useful functions include:
-
-@table @code
-@item gnus-summary-first-unread-subject
-Place point on the subject line of the first unread article, but
-don't select the article.
-
-@item gnus-summary-first-unread-article
-Select the first unread article.
-
-@item gnus-summary-best-unread-article
-Select the highest-scored unread article.
-@end table
-
-
-If you want to prevent automatic selection in some group (say, in a
-binary group with Huge articles) you can set this variable to @code{nil}
-in @code{gnus-select-group-hook}, which is called when a group is
-selected.
-
-
-@node Subscription Commands
-@section Subscription Commands
-@cindex subscription
-
-@table @kbd
-
-@item S t
-@itemx u
-@kindex S t (Group)
-@kindex u (Group)
-@findex gnus-group-unsubscribe-current-group
-@c @icon{gnus-group-unsubscribe}
-Toggle subscription to the current group
-(@code{gnus-group-unsubscribe-current-group}).
-
-@item S s
-@itemx U
-@kindex S s (Group)
-@kindex U (Group)
-@findex gnus-group-unsubscribe-group
-Prompt for a group to subscribe, and then subscribe it. If it was
-subscribed already, unsubscribe it instead
-(@code{gnus-group-unsubscribe-group}).
-
-@item S k
-@itemx C-k
-@kindex S k (Group)
-@kindex C-k (Group)
-@findex gnus-group-kill-group
-@c @icon{gnus-group-kill-group}
-Kill the current group (@code{gnus-group-kill-group}).
-
-@item S y
-@itemx C-y
-@kindex S y (Group)
-@kindex C-y (Group)
-@findex gnus-group-yank-group
-Yank the last killed group (@code{gnus-group-yank-group}).
-
-@item C-x C-t
-@kindex C-x C-t (Group)
-@findex gnus-group-transpose-groups
-Transpose two groups (@code{gnus-group-transpose-groups}). This isn't
-really a subscription command, but you can use it instead of a
-kill-and-yank sequence sometimes.
-
-@item S w
-@itemx C-w
-@kindex S w (Group)
-@kindex C-w (Group)
-@findex gnus-group-kill-region
-Kill all groups in the region (@code{gnus-group-kill-region}).
-
-@item S z
-@kindex S z (Group)
-@findex gnus-group-kill-all-zombies
-Kill all zombie groups (@code{gnus-group-kill-all-zombies}).
-
-@item S C-k
-@kindex S C-k (Group)
-@findex gnus-group-kill-level
-Kill all groups on a certain level (@code{gnus-group-kill-level}).
-These groups can't be yanked back after killing, so this command should
-be used with some caution. The only time where this command comes in
-really handy is when you have a @file{.newsrc} with lots of unsubscribed
-groups that you want to get rid off. @kbd{S C-k} on level 7 will
-kill off all unsubscribed groups that do not have message numbers in the
-@file{.newsrc} file.
-
-@end table
-
-Also @pxref{Group Levels}.
-
-
-@node Group Data
-@section Group Data
-
-@table @kbd
-
-@item c
-@kindex c (Group)
-@findex gnus-group-catchup-current
-@vindex gnus-group-catchup-group-hook
-@c @icon{gnus-group-catchup-current}
-Mark all unticked articles in this group as read
-(@code{gnus-group-catchup-current}).
-@code{gnus-group-catchup-group-hook} is called when catching up a group from
-the group buffer.
-
-@item C
-@kindex C (Group)
-@findex gnus-group-catchup-current-all
-Mark all articles in this group, even the ticked ones, as read
-(@code{gnus-group-catchup-current-all}).
-
-@item M-c
-@kindex M-c (Group)
-@findex gnus-group-clear-data
-Clear the data from the current group---nix out marks and the list of
-read articles (@code{gnus-group-clear-data}).
-
-@item M-x gnus-group-clear-data-on-native-groups
-@kindex M-x gnus-group-clear-data-on-native-groups
-@findex gnus-group-clear-data-on-native-groups
-If you have switched from one @sc{nntp} server to another, all your marks
-and read ranges have become worthless. You can use this command to
-clear out all data that you have on your native groups. Use with
-caution.
-
-@end table
-
-
-@node Group Levels
-@section Group Levels
-@cindex group level
-@cindex level
-
-All groups have a level of @dfn{subscribedness}. For instance, if a
-group is on level 2, it is more subscribed than a group on level 5. You
-can ask Gnus to just list groups on a given level or lower
-(@pxref{Listing Groups}), or to just check for new articles in groups on
-a given level or lower (@pxref{Scanning New Messages}).
-
-Remember: The higher the level of the group, the less important it is.
-
-@table @kbd
-
-@item S l
-@kindex S l (Group)
-@findex gnus-group-set-current-level
-Set the level of the current group. If a numeric prefix is given, the
-next @var{n} groups will have their levels set. The user will be
-prompted for a level.
-@end table
-
-@vindex gnus-level-killed
-@vindex gnus-level-zombie
-@vindex gnus-level-unsubscribed
-@vindex gnus-level-subscribed
-Gnus considers groups from levels 1 to
-@code{gnus-level-subscribed} (inclusive) (default 5) to be subscribed,
-@code{gnus-level-subscribed} (exclusive) and
-@code{gnus-level-unsubscribed} (inclusive) (default 7) to be
-unsubscribed, @code{gnus-level-zombie} to be zombies (walking dead)
-(default 8) and @code{gnus-level-killed} to be killed (completely dead)
-(default 9). Gnus treats subscribed and unsubscribed groups exactly the
-same, but zombie and killed groups have no information on what articles
-you have read, etc, stored. This distinction between dead and living
-groups isn't done because it is nice or clever, it is done purely for
-reasons of efficiency.
-
-It is recommended that you keep all your mail groups (if any) on quite
-low levels (e.g. 1 or 2).
-
-If you want to play with the level variables, you should show some care.
-Set them once, and don't touch them ever again. Better yet, don't touch
-them at all unless you know exactly what you're doing.
-
-@vindex gnus-level-default-unsubscribed
-@vindex gnus-level-default-subscribed
-Two closely related variables are @code{gnus-level-default-subscribed}
-(default 3) and @code{gnus-level-default-unsubscribed} (default 6),
-which are the levels that new groups will be put on if they are
-(un)subscribed. These two variables should, of course, be inside the
-relevant valid ranges.
-
-@vindex gnus-keep-same-level
-If @code{gnus-keep-same-level} is non-@code{nil}, some movement commands
-will only move to groups of the same level (or lower). In
-particular, going from the last article in one group to the next group
-will go to the next group of the same level (or lower). This might be
-handy if you want to read the most important groups before you read the
-rest.
-
-@vindex gnus-group-default-list-level
-All groups with a level less than or equal to
-@code{gnus-group-default-list-level} will be listed in the group buffer
-by default.
-
-@vindex gnus-group-list-inactive-groups
-If @code{gnus-group-list-inactive-groups} is non-@code{nil}, non-active
-groups will be listed along with the unread groups. This variable is
-@code{t} by default. If it is @code{nil}, inactive groups won't be
-listed.
-
-@vindex gnus-group-use-permanent-levels
-If @code{gnus-group-use-permanent-levels} is non-@code{nil}, once you
-give a level prefix to @kbd{g} or @kbd{l}, all subsequent commands will
-use this level as the ``work'' level.
-
-@vindex gnus-activate-level
-Gnus will normally just activate (i. e., query the server about) groups
-on level @code{gnus-activate-level} or less. If you don't want to
-activate unsubscribed groups, for instance, you might set this variable
-to 5. The default is 6.
-
-
-@node Group Score
-@section Group Score
-@cindex group score
-@cindex group rank
-@cindex rank
-
-You would normally keep important groups on high levels, but that scheme
-is somewhat restrictive. Don't you wish you could have Gnus sort the
-group buffer according to how often you read groups, perhaps? Within
-reason?
-
-This is what @dfn{group score} is for. You can assign a score to each
-group. You can then sort the group buffer based on this score.
-Alternatively, you can sort on score and then level. (Taken together,
-the level and the score is called the @dfn{rank} of the group. A group
-that is on level 4 and has a score of 1 has a higher rank than a group
-on level 5 that has a score of 300. (The level is the most significant
-part and the score is the least significant part.))
-
-@findex gnus-summary-bubble-group
-If you want groups you read often to get higher scores than groups you
-read seldom you can add the @code{gnus-summary-bubble-group} function to
-the @code{gnus-summary-exit-hook} hook. This will result (after
-sorting) in a bubbling sort of action. If you want to see that in
-action after each summary exit, you can add
-@code{gnus-group-sort-groups-by-rank} or
-@code{gnus-group-sort-groups-by-score} to the same hook, but that will
-slow things down somewhat.
-
-
-@node Marking Groups
-@section Marking Groups
-@cindex marking groups
-
-If you want to perform some command on several groups, and they appear
-subsequently in the group buffer, you would normally just give a
-numerical prefix to the command. Most group commands will then do your
-bidding on those groups.
-
-However, if the groups are not in sequential order, you can still
-perform a command on several groups. You simply mark the groups first
-with the process mark and then execute the command.
-
-@table @kbd
-
-@item #
-@kindex # (Group)
-@itemx M m
-@kindex M m (Group)
-@findex gnus-group-mark-group
-Set the mark on the current group (@code{gnus-group-mark-group}).
-
-@item M-#
-@kindex M-# (Group)
-@itemx M u
-@kindex M u (Group)
-@findex gnus-group-unmark-group
-Remove the mark from the current group
-(@code{gnus-group-unmark-group}).
-
-@item M U
-@kindex M U (Group)
-@findex gnus-group-unmark-all-groups
-Remove the mark from all groups (@code{gnus-group-unmark-all-groups}).
-
-@item M w
-@kindex M w (Group)
-@findex gnus-group-mark-region
-Mark all groups between point and mark (@code{gnus-group-mark-region}).
-
-@item M b
-@kindex M b (Group)
-@findex gnus-group-mark-buffer
-Mark all groups in the buffer (@code{gnus-group-mark-buffer}).
-
-@item M r
-@kindex M r (Group)
-@findex gnus-group-mark-regexp
-Mark all groups that match some regular expression
-(@code{gnus-group-mark-regexp}).
-@end table
-
-Also @pxref{Process/Prefix}.
-
-@findex gnus-group-universal-argument
-If you want to execute some command on all groups that have been marked
-with the process mark, you can use the @kbd{M-&}
-(@code{gnus-group-universal-argument}) command. It will prompt you for
-the command to be executed.
-
-
-@node Foreign Groups
-@section Foreign Groups
-@cindex foreign groups
-
-Below are some group mode commands for making and editing general foreign
-groups, as well as commands to ease the creation of a few
-special-purpose groups. All these commands insert the newly created
-groups under point---@code{gnus-subscribe-newsgroup-method} is not
-consulted.
-
-@table @kbd
-
-@item G m
-@kindex G m (Group)
-@findex gnus-group-make-group
-@cindex making groups
-Make a new group (@code{gnus-group-make-group}). Gnus will prompt you
-for a name, a method and possibly an @dfn{address}. For an easier way
-to subscribe to @sc{nntp} groups, @pxref{Browse Foreign Server}.
-
-@item G r
-@kindex G r (Group)
-@findex gnus-group-rename-group
-@cindex renaming groups
-Rename the current group to something else
-(@code{gnus-group-rename-group}). This is valid only on some
-groups---mail groups mostly. This command might very well be quite slow
-on some backends.
-
-@item G c
-@kindex G c (Group)
-@cindex customizing
-@findex gnus-group-customize
-Customize the group parameters (@code{gnus-group-customize}).
-
-@item G e
-@kindex G e (Group)
-@findex gnus-group-edit-group-method
-@cindex renaming groups
-Enter a buffer where you can edit the select method of the current
-group (@code{gnus-group-edit-group-method}).
-
-@item G p
-@kindex G p (Group)
-@findex gnus-group-edit-group-parameters
-Enter a buffer where you can edit the group parameters
-(@code{gnus-group-edit-group-parameters}).
-
-@item G E
-@kindex G E (Group)
-@findex gnus-group-edit-group
-Enter a buffer where you can edit the group info
-(@code{gnus-group-edit-group}).
-
-@item G d
-@kindex G d (Group)
-@findex gnus-group-make-directory-group
-@cindex nndir
-Make a directory group (@pxref{Directory Groups}). You will be prompted
-for a directory name (@code{gnus-group-make-directory-group}).
-
-@item G h
-@kindex G h (Group)
-@cindex help group
-@findex gnus-group-make-help-group
-Make the Gnus help group (@code{gnus-group-make-help-group}).
-
-@item G a
-@kindex G a (Group)
-@cindex (ding) archive
-@cindex archive group
-@findex gnus-group-make-archive-group
-@vindex gnus-group-archive-directory
-@vindex gnus-group-recent-archive-directory
-Make a Gnus archive group (@code{gnus-group-make-archive-group}). By
-default a group pointing to the most recent articles will be created
-(@code{gnus-group-recent-archive-directory}), but given a prefix, a full
-group will be created from @code{gnus-group-archive-directory}.
-
-@item G k
-@kindex G k (Group)
-@findex gnus-group-make-kiboze-group
-@cindex nnkiboze
-Make a kiboze group. You will be prompted for a name, for a regexp to
-match groups to be ``included'' in the kiboze group, and a series of
-strings to match on headers (@code{gnus-group-make-kiboze-group}).
-@xref{Kibozed Groups}.
-
-@item G D
-@kindex G D (Group)
-@findex gnus-group-enter-directory
-@cindex nneething
-Read an arbitrary directory as if it were a newsgroup with the
-@code{nneething} backend (@code{gnus-group-enter-directory}).
-@xref{Anything Groups}.
-
-@item G f
-@kindex G f (Group)
-@findex gnus-group-make-doc-group
-@cindex ClariNet Briefs
-@cindex nndoc
-Make a group based on some file or other
-(@code{gnus-group-make-doc-group}). If you give a prefix to this
-command, you will be prompted for a file name and a file type.
-Currently supported types are @code{babyl}, @code{mbox}, @code{digest},
-@code{mmdf}, @code{news}, @code{rnews}, @code{clari-briefs},
-@code{rfc934}, @code{rfc822-forward}, and @code{forward}. If you run
-this command without a prefix, Gnus will guess at the file type.
-@xref{Document Groups}.
-
-@item G u
-@kindex G u (Group)
-@vindex gnus-useful-groups
-@findex gnus-group-make-useful-group
-Create one of the groups mentioned in @code{gnus-useful-groups}
-(@code{gnus-group-make-useful-group}).
-
-@item G w
-@kindex G w (Group)
-@findex gnus-group-make-web-group
-@cindex DejaNews
-@cindex Alta Vista
-@cindex InReference
-@cindex nnweb
-Make an ephemeral group based on a web search
-(@code{gnus-group-make-web-group}). If you give a prefix to this
-command, make a solid group instead. You will be prompted for the
-search engine type and the search string. Valid search engine types
-include @code{dejanews}, @code{altavista} and @code{reference}.
-@xref{Web Searches}.
-
-If you use the @code{dejanews} search engine, you can limit the search
-to a particular group by using a match string like
-@samp{~g alt.sysadmin.recovery shaving}.
-
-@item G DEL
-@kindex G DEL (Group)
-@findex gnus-group-delete-group
-This function will delete the current group
-(@code{gnus-group-delete-group}). If given a prefix, this function will
-actually delete all the articles in the group, and forcibly remove the
-group itself from the face of the Earth. Use a prefix only if you are
-absolutely sure of what you are doing. This command can't be used on
-read-only groups (like @code{nntp} group), though.
-
-@item G V
-@kindex G V (Group)
-@findex gnus-group-make-empty-virtual
-Make a new, fresh, empty @code{nnvirtual} group
-(@code{gnus-group-make-empty-virtual}). @xref{Virtual Groups}.
-
-@item G v
-@kindex G v (Group)
-@findex gnus-group-add-to-virtual
-Add the current group to an @code{nnvirtual} group
-(@code{gnus-group-add-to-virtual}). Uses the process/prefix convention.
-@end table
-
-@xref{Select Methods} for more information on the various select
-methods.
-
-@vindex gnus-activate-foreign-newsgroups
-If @code{gnus-activate-foreign-newsgroups} is a positive number,
-Gnus will check all foreign groups with this level or lower at startup.
-This might take quite a while, especially if you subscribe to lots of
-groups from different @sc{nntp} servers. Also @pxref{Group Levels};
-@code{gnus-activate-level} also affects activation of foreign
-newsgroups.
-
-
-@node Group Parameters
-@section Group Parameters
-@cindex group parameters
-
-The group parameters store information local to a particular group.
-Here's an example group parameter list:
-
-@example
-((to-address . "ding@@gnus.org")
- (auto-expire . t))
-@end example
-
-We see that each element consists of a "dotted pair"---the thing before
-the dot is the key, while the thing after the dot is the value. All the
-parameters have this form @emph{except} local variable specs, which are
-not dotted pairs, but proper lists.
-
-The following group parameters can be used:
-
-@table @code
-@item to-address
-@cindex to-address
-Address used by when doing followups and new posts.
-
-@example
-(to-address . "some@@where.com")
-@end example
-
-This is primarily useful in mail groups that represent closed mailing
-lists---mailing lists where it's expected that everybody that writes to
-the mailing list is subscribed to it. Since using this parameter
-ensures that the mail only goes to the mailing list itself, it means
-that members won't receive two copies of your followups.
-
-Using @code{to-address} will actually work whether the group is foreign
-or not. Let's say there's a group on the server that is called
-@samp{fa.4ad-l}. This is a real newsgroup, but the server has gotten
-the articles from a mail-to-news gateway. Posting directly to this
-group is therefore impossible---you have to send mail to the mailing
-list address instead.
-
-@item to-list
-@cindex to-list
-Address used when doing a @kbd{a} in that group.
-
-@example
-(to-list . "some@@where.com")
-@end example
-
-It is totally ignored
-when doing a followup---except that if it is present in a news group,
-you'll get mail group semantics when doing @kbd{f}.
-
-If you do an @kbd{a} command in a mail group and you have neither a
-@code{to-list} group parameter nor a @code{to-address} group parameter,
-then a @code{to-list} group parameter will be added automatically upon
-sending the message if @code{gnus-add-to-list} is set to @code{t}.
-@vindex gnus-add-to-list
-
-If you do an @kbd{a} command in a mail group and you don't have a
-@code{to-list} group parameter, one will be added automatically upon
-sending the message.
-
-@item visible
-@cindex visible
-If the group parameter list has the element @code{(visible . t)},
-that group will always be visible in the Group buffer, regardless
-of whether it has any unread articles.
-
-@item broken-reply-to
-@cindex broken-reply-to
-Elements like @code{(broken-reply-to . t)} signals that @code{Reply-To}
-headers in this group are to be ignored. This can be useful if you're
-reading a mailing list group where the listserv has inserted
-@code{Reply-To} headers that point back to the listserv itself. This is
-broken behavior. So there!
-
-@item to-group
-@cindex to-group
-Elements like @code{(to-group . "some.group.name")} means that all
-posts in that group will be sent to @code{some.group.name}.
-
-@item newsgroup
-@cindex newsgroup
-If you have @code{(newsgroup . t)} in the group parameter list, Gnus
-will treat all responses as if they were responses to news articles.
-This can be useful if you have a mail group that's really a mirror of a
-news group.
-
-@item gcc-self
-@cindex gcc-self
-If @code{(gcc-self . t)} is present in the group parameter list, newly
-composed messages will be @code{Gcc}'d to the current group. If
-@code{(gcc-self . none)} is present, no @code{Gcc:} header will be
-generated, if @code{(gcc-self . "string")} is present, this string will
-be inserted literally as a @code{gcc} header. This parameter takes
-precedence over any default @code{Gcc} rules as described later
-(@pxref{Archived Messages}).
-
-@item auto-expire
-@cindex auto-expire
-If the group parameter has an element that looks like @code{(auto-expire
-. t)}, all articles read will be marked as expirable. For an
-alternative approach, @pxref{Expiring Mail}.
-
-@item total-expire
-@cindex total-expire
-If the group parameter has an element that looks like
-@code{(total-expire . t)}, all read articles will be put through the
-expiry process, even if they are not marked as expirable. Use with
-caution. Unread, ticked and dormant articles are not eligible for
-expiry.
-
-@item expiry-wait
-@cindex expiry-wait
-@vindex nnmail-expiry-wait-function
-If the group parameter has an element that looks like @code{(expiry-wait
-. 10)}, this value will override any @code{nnmail-expiry-wait} and
-@code{nnmail-expiry-wait-function} when expiring expirable messages.
-The value can either be a number of days (not necessarily an integer) or
-the symbols @code{never} or @code{immediate}.
-
-@item score-file
-@cindex score file group parameter
-Elements that look like @code{(score-file . "file")} will make
-@file{file} into the current score file for the group in question. All
-interactive score entries will be put into this file.
-
-@item adapt-file
-@cindex adapt file group parameter
-Elements that look like @code{(adapt-file . "file")} will make
-@file{file} into the current adaptive file for the group in question.
-All adaptive score entries will be put into this file.
-
-@item admin-address
-When unsubscribing from a mailing list you should never send the
-unsubscription notice to the mailing list itself. Instead, you'd send
-messages to the administrative address. This parameter allows you to
-put the admin address somewhere convenient.
-
-@item display
-Elements that look like @code{(display . MODE)} say which articles to
-display on entering the group. Valid values are:
-
-@table @code
-@item all
-Display all articles, both read and unread.
-
-@item default
-Display the default visible articles, which normally includes unread and
-ticked articles.
-@end table
-
-@item comment
-Elements that look like @code{(comment . "This is a comment")}
-are arbitrary comments on the group. They are currently ignored by
-Gnus, but provide a place for you to store information on particular
-groups.
-
-@item charset
-Elements that look like @code{(charset . iso-8859-1)} will make
-@code{iso-8859-1} the default charset; that is, the charset that will be
-used for all articles that do not specify a charset.
-
-@item @var{(variable form)}
-You can use the group parameters to set variables local to the group you
-are entering. If you want to turn threading off in @samp{news.answers},
-you could put @code{(gnus-show-threads nil)} in the group parameters of
-that group. @code{gnus-show-threads} will be made into a local variable
-in the summary buffer you enter, and the form @code{nil} will be
-@code{eval}ed there.
-
-This can also be used as a group-specific hook function, if you'd like.
-If you want to hear a beep when you enter a group, you could put
-something like @code{(dummy-variable (ding))} in the parameters of that
-group. @code{dummy-variable} will be set to the result of the
-@code{(ding)} form, but who cares?
-
-@end table
-
-Use the @kbd{G p} command to edit group parameters of a group. You
-might also be interested in reading about topic parameters (@pxref{Topic
-Parameters}).
-
-
-@node Listing Groups
-@section Listing Groups
-@cindex group listing
-
-These commands all list various slices of the groups available.
-
-@table @kbd
-
-@item l
-@itemx A s
-@kindex A s (Group)
-@kindex l (Group)
-@findex gnus-group-list-groups
-List all groups that have unread articles
-(@code{gnus-group-list-groups}). If the numeric prefix is used, this
-command will list only groups of level ARG and lower. By default, it
-only lists groups of level five (i. e.,
-@code{gnus-group-default-list-level}) or lower (i.e., just subscribed
-groups).
-
-@item L
-@itemx A u
-@kindex A u (Group)
-@kindex L (Group)
-@findex gnus-group-list-all-groups
-List all groups, whether they have unread articles or not
-(@code{gnus-group-list-all-groups}). If the numeric prefix is used,
-this command will list only groups of level ARG and lower. By default,
-it lists groups of level seven or lower (i.e., just subscribed and
-unsubscribed groups).
-
-@item A l
-@kindex A l (Group)
-@findex gnus-group-list-level
-List all unread groups on a specific level
-(@code{gnus-group-list-level}). If given a prefix, also list the groups
-with no unread articles.
-
-@item A k
-@kindex A k (Group)
-@findex gnus-group-list-killed
-List all killed groups (@code{gnus-group-list-killed}). If given a
-prefix argument, really list all groups that are available, but aren't
-currently (un)subscribed. This could entail reading the active file
-from the server.
-
-@item A z
-@kindex A z (Group)
-@findex gnus-group-list-zombies
-List all zombie groups (@code{gnus-group-list-zombies}).
-
-@item A m
-@kindex A m (Group)
-@findex gnus-group-list-matching
-List all unread, subscribed groups with names that match a regexp
-(@code{gnus-group-list-matching}).
-
-@item A M
-@kindex A M (Group)
-@findex gnus-group-list-all-matching
-List groups that match a regexp (@code{gnus-group-list-all-matching}).
-
-@item A A
-@kindex A A (Group)
-@findex gnus-group-list-active
-List absolutely all groups in the active file(s) of the
-server(s) you are connected to (@code{gnus-group-list-active}). This
-might very well take quite a while. It might actually be a better idea
-to do a @kbd{A M} to list all matching, and just give @samp{.} as the
-thing to match on. Also note that this command may list groups that
-don't exist (yet)---these will be listed as if they were killed groups.
-Take the output with some grains of salt.
-
-@item A a
-@kindex A a (Group)
-@findex gnus-group-apropos
-List all groups that have names that match a regexp
-(@code{gnus-group-apropos}).
-
-@item A d
-@kindex A d (Group)
-@findex gnus-group-description-apropos
-List all groups that have names or descriptions that match a regexp
-(@code{gnus-group-description-apropos}).
-
-@end table
-
-@vindex gnus-permanently-visible-groups
-@cindex visible group parameter
-Groups that match the @code{gnus-permanently-visible-groups} regexp will
-always be shown, whether they have unread articles or not. You can also
-add the @code{visible} element to the group parameters in question to
-get the same effect.
-
-@vindex gnus-list-groups-with-ticked-articles
-Groups that have just ticked articles in it are normally listed in the
-group buffer. If @code{gnus-list-groups-with-ticked-articles} is
-@code{nil}, these groups will be treated just like totally empty
-groups. It is @code{t} by default.
-
-
-@node Sorting Groups
-@section Sorting Groups
-@cindex sorting groups
-
-@kindex C-c C-s (Group)
-@findex gnus-group-sort-groups
-@vindex gnus-group-sort-function
-The @kbd{C-c C-s} (@code{gnus-group-sort-groups}) command sorts the
-group buffer according to the function(s) given by the
-@code{gnus-group-sort-function} variable. Available sorting functions
-include:
-
-@table @code
-
-@item gnus-group-sort-by-alphabet
-@findex gnus-group-sort-by-alphabet
-Sort the group names alphabetically. This is the default.
-
-@item gnus-group-sort-by-real-name
-@findex gnus-group-sort-by-real-name
-Sort the group alphabetically on the real (unprefixed) group names.
-
-@item gnus-group-sort-by-level
-@findex gnus-group-sort-by-level
-Sort by group level.
-
-@item gnus-group-sort-by-score
-@findex gnus-group-sort-by-score
-Sort by group score. @xref{Group Score}.
-
-@item gnus-group-sort-by-rank
-@findex gnus-group-sort-by-rank
-Sort by group score and then the group level. The level and the score
-are, when taken together, the group's @dfn{rank}. @xref{Group Score}.
-
-@item gnus-group-sort-by-unread
-@findex gnus-group-sort-by-unread
-Sort by number of unread articles.
-
-@item gnus-group-sort-by-method
-@findex gnus-group-sort-by-method
-Sort alphabetically on the select method.
-
-
-@end table
-
-@code{gnus-group-sort-function} can also be a list of sorting
-functions. In that case, the most significant sort key function must be
-the last one.
-
-
-There are also a number of commands for sorting directly according to
-some sorting criteria:
-
-@table @kbd
-@item G S a
-@kindex G S a (Group)
-@findex gnus-group-sort-groups-by-alphabet
-Sort the group buffer alphabetically by group name
-(@code{gnus-group-sort-groups-by-alphabet}).
-
-@item G S u
-@kindex G S u (Group)
-@findex gnus-group-sort-groups-by-unread
-Sort the group buffer by the number of unread articles
-(@code{gnus-group-sort-groups-by-unread}).
-
-@item G S l
-@kindex G S l (Group)
-@findex gnus-group-sort-groups-by-level
-Sort the group buffer by group level
-(@code{gnus-group-sort-groups-by-level}).
-
-@item G S v
-@kindex G S v (Group)
-@findex gnus-group-sort-groups-by-score
-Sort the group buffer by group score
-(@code{gnus-group-sort-groups-by-score}). @xref{Group Score}.
-
-@item G S r
-@kindex G S r (Group)
-@findex gnus-group-sort-groups-by-rank
-Sort the group buffer by group rank
-(@code{gnus-group-sort-groups-by-rank}). @xref{Group Score}.
-
-@item G S m
-@kindex G S m (Group)
-@findex gnus-group-sort-groups-by-method
-Sort the group buffer alphabetically by backend name
-(@code{gnus-group-sort-groups-by-method}).
-
-@end table
-
-All the commands below obeys the process/prefix convention
-(@pxref{Process/Prefix}).
-
-When given a symbolic prefix (@pxref{Symbolic Prefixes}), all these
-commands will sort in reverse order.
-
-You can also sort a subset of the groups:
-
-@table @kbd
-@item G P a
-@kindex G P a (Group)
-@findex gnus-group-sort-selected-groups-by-alphabet
-Sort the groups alphabetically by group name
-(@code{gnus-group-sort-selected-groups-by-alphabet}).
-
-@item G P u
-@kindex G P u (Group)
-@findex gnus-group-sort-selected-groups-by-unread
-Sort the groups by the number of unread articles
-(@code{gnus-group-sort-selected-groups-by-unread}).
-
-@item G P l
-@kindex G P l (Group)
-@findex gnus-group-sort-selected-groups-by-level
-Sort the groups by group level
-(@code{gnus-group-sort-selected-groups-by-level}).
-
-@item G P v
-@kindex G P v (Group)
-@findex gnus-group-sort-selected-groups-by-score
-Sort the groups by group score
-(@code{gnus-group-sort-selected-groups-by-score}). @xref{Group Score}.
-
-@item G P r
-@kindex G P r (Group)
-@findex gnus-group-sort-selected-groups-by-rank
-Sort the groups by group rank
-(@code{gnus-group-sort-selected-groups-by-rank}). @xref{Group Score}.
-
-@item G P m
-@kindex G P m (Group)
-@findex gnus-group-sort-selected-groups-by-method
-Sort the groups alphabetically by backend name
-(@code{gnus-group-sort-selected-groups-by-method}).
-
-@end table
-
-
-
-@node Group Maintenance
-@section Group Maintenance
-@cindex bogus groups
-
-@table @kbd
-@item b
-@kindex b (Group)
-@findex gnus-group-check-bogus-groups
-Find bogus groups and delete them
-(@code{gnus-group-check-bogus-groups}).
-
-@item F
-@kindex F (Group)
-@findex gnus-group-find-new-groups
-Find new groups and process them (@code{gnus-group-find-new-groups}).
-With 1 @kbd{C-u}, use the @code{ask-server} method to query the server
-for new groups. With 2 @kbd{C-u}'s, use most complete method possible
-to query the server for new groups, and subscribe the new groups as
-zombies.
-
-@item C-c C-x
-@kindex C-c C-x (Group)
-@findex gnus-group-expire-articles
-Run all expirable articles in the current group through the expiry
-process (if any) (@code{gnus-group-expire-articles}).
-
-@item C-c M-C-x
-@kindex C-c M-C-x (Group)
-@findex gnus-group-expire-all-groups
-Run all articles in all groups through the expiry process
-(@code{gnus-group-expire-all-groups}).
-
-@end table
-
-
-@node Browse Foreign Server
-@section Browse Foreign Server
-@cindex foreign servers
-@cindex browsing servers
-
-@table @kbd
-@item B
-@kindex B (Group)
-@findex gnus-group-browse-foreign-server
-You will be queried for a select method and a server name. Gnus will
-then attempt to contact this server and let you browse the groups there
-(@code{gnus-group-browse-foreign-server}).
-@end table
-
-@findex gnus-browse-mode
-A new buffer with a list of available groups will appear. This buffer
-will use the @code{gnus-browse-mode}. This buffer looks a bit (well,
-a lot) like a normal group buffer.
-
-Here's a list of keystrokes available in the browse mode:
-
-@table @kbd
-@item n
-@kindex n (Browse)
-@findex gnus-group-next-group
-Go to the next group (@code{gnus-group-next-group}).
-
-@item p
-@kindex p (Browse)
-@findex gnus-group-prev-group
-Go to the previous group (@code{gnus-group-prev-group}).
-
-@item SPACE
-@kindex SPACE (Browse)
-@findex gnus-browse-read-group
-Enter the current group and display the first article
-(@code{gnus-browse-read-group}).
-
-@item RET
-@kindex RET (Browse)
-@findex gnus-browse-select-group
-Enter the current group (@code{gnus-browse-select-group}).
-
-@item u
-@kindex u (Browse)
-@findex gnus-browse-unsubscribe-current-group
-Unsubscribe to the current group, or, as will be the case here,
-subscribe to it (@code{gnus-browse-unsubscribe-current-group}).
-
-@item l
-@itemx q
-@kindex q (Browse)
-@kindex l (Browse)
-@findex gnus-browse-exit
-Exit browse mode (@code{gnus-browse-exit}).
-
-@item ?
-@kindex ? (Browse)
-@findex gnus-browse-describe-briefly
-Describe browse mode briefly (well, there's not much to describe, is
-there) (@code{gnus-browse-describe-briefly}).
-@end table
-
-
-@node Exiting Gnus
-@section Exiting Gnus
-@cindex exiting Gnus
-
-Yes, Gnus is ex(c)iting.
-
-@table @kbd
-@item z
-@kindex z (Group)
-@findex gnus-group-suspend
-Suspend Gnus (@code{gnus-group-suspend}). This doesn't really exit Gnus,
-but it kills all buffers except the Group buffer. I'm not sure why this
-is a gain, but then who am I to judge?
-
-@item q
-@kindex q (Group)
-@findex gnus-group-exit
-@c @icon{gnus-group-exit}
-Quit Gnus (@code{gnus-group-exit}).
-
-@item Q
-@kindex Q (Group)
-@findex gnus-group-quit
-Quit Gnus without saving the @file{.newsrc} files (@code{gnus-group-quit}).
-The dribble file will be saved, though (@pxref{Auto Save}).
-@end table
-
-@vindex gnus-exit-gnus-hook
-@vindex gnus-suspend-gnus-hook
-@code{gnus-suspend-gnus-hook} is called when you suspend Gnus and
-@code{gnus-exit-gnus-hook} is called when you quit Gnus, while
-@code{gnus-after-exiting-gnus-hook} is called as the final item when
-exiting Gnus.
-
-@findex gnus-unload
-@cindex unloading
-If you wish to completely unload Gnus and all its adherents, you can use
-the @code{gnus-unload} command. This command is also very handy when
-trying to customize meta-variables.
-
-Note:
-
-@quotation
-Miss Lisa Cannifax, while sitting in English class, felt her feet go
-numbly heavy and herself fall into a hazy trance as the boy sitting
-behind her drew repeated lines with his pencil across the back of her
-plastic chair.
-@end quotation
-
-
-@node Group Topics
-@section Group Topics
-@cindex topics
-
-If you read lots and lots of groups, it might be convenient to group
-them hierarchically according to topics. You put your Emacs groups over
-here, your sex groups over there, and the rest (what, two groups or so?)
-you put in some misc section that you never bother with anyway. You can
-even group the Emacs sex groups as a sub-topic to either the Emacs
-groups or the sex groups---or both! Go wild!
-
-@iftex
-@iflatex
-\gnusfigure{Group Topics}{400}{
-\put(75,50){\epsfig{figure=tmp/group-topic.ps,height=9cm}}
-}
-@end iflatex
-@end iftex
-
-Here's an example:
-
-@example
-Gnus
- Emacs -- I wuw it!
- 3: comp.emacs
- 2: alt.religion.emacs
- Naughty Emacs
- 452: alt.sex.emacs
- 0: comp.talk.emacs.recovery
- Misc
- 8: comp.binaries.fractals
- 13: comp.sources.unix
-@end example
-
-@findex gnus-topic-mode
-@kindex t (Group)
-To get this @emph{fab} functionality you simply turn on (ooh!) the
-@code{gnus-topic} minor mode---type @kbd{t} in the group buffer. (This
-is a toggling command.)
-
-Go ahead, just try it. I'll still be here when you get back. La de
-dum... Nice tune, that... la la la... What, you're back? Yes, and now
-press @kbd{l}. There. All your groups are now listed under
-@samp{misc}. Doesn't that make you feel all warm and fuzzy? Hot and
-bothered?
-
-If you want this permanently enabled, you should add that minor mode to
-the hook for the group mode:
-
-@lisp
-(add-hook 'gnus-group-mode-hook 'gnus-topic-mode)
-@end lisp
-
-@menu
-* Topic Variables:: How to customize the topics the Lisp Way.
-* Topic Commands:: Interactive E-Z commands.
-* Topic Sorting:: Sorting each topic individually.
-* Topic Topology:: A map of the world.
-* Topic Parameters:: Parameters that apply to all groups in a topic.
-@end menu
-
-
-@node Topic Variables
-@subsection Topic Variables
-@cindex topic variables
-
-Now, if you select a topic, it will fold/unfold that topic, which is
-really neat, I think.
-
-@vindex gnus-topic-line-format
-The topic lines themselves are created according to the
-@code{gnus-topic-line-format} variable (@pxref{Formatting Variables}).
-Valid elements are:
-
-@table @samp
-@item i
-Indentation.
-@item n
-Topic name.
-@item v
-Visibility.
-@item l
-Level.
-@item g
-Number of groups in the topic.
-@item a
-Number of unread articles in the topic.
-@item A
-Number of unread articles in the topic and all its subtopics.
-@end table
-
-@vindex gnus-topic-indent-level
-Each sub-topic (and the groups in the sub-topics) will be indented with
-@code{gnus-topic-indent-level} times the topic level number of spaces.
-The default is 2.
-
-@vindex gnus-topic-mode-hook
-@code{gnus-topic-mode-hook} is called in topic minor mode buffers.
-
-@vindex gnus-topic-display-empty-topics
-The @code{gnus-topic-display-empty-topics} says whether to display even
-topics that have no unread articles in them. The default is @code{t}.
-
-
-@node Topic Commands
-@subsection Topic Commands
-@cindex topic commands
-
-When the topic minor mode is turned on, a new @kbd{T} submap will be
-available. In addition, a few of the standard keys change their
-definitions slightly.
-
-@table @kbd
-
-@item T n
-@kindex T n (Topic)
-@findex gnus-topic-create-topic
-Prompt for a new topic name and create it
-(@code{gnus-topic-create-topic}).
-
-@item T m
-@kindex T m (Topic)
-@findex gnus-topic-move-group
-Move the current group to some other topic
-(@code{gnus-topic-move-group}). This command uses the process/prefix
-convention (@pxref{Process/Prefix}).
-
-@item T c
-@kindex T c (Topic)
-@findex gnus-topic-copy-group
-Copy the current group to some other topic
-(@code{gnus-topic-copy-group}). This command uses the process/prefix
-convention (@pxref{Process/Prefix}).
-
-@item T D
-@kindex T D (Topic)
-@findex gnus-topic-remove-group
-Remove a group from the current topic (@code{gnus-topic-remove-group}).
-This command is mainly useful if you have the same group in several
-topics and wish to remove it from one of the topics. You may also
-remove a group from all topics, but in that case, Gnus will add it to
-the root topic the next time you start Gnus. In fact, all new groups
-(which, naturally, don't belong to any topic) will show up in the root
-topic.
-
-This command uses the process/prefix convention
-(@pxref{Process/Prefix}).
-
-@item T M
-@kindex T M (Topic)
-@findex gnus-topic-move-matching
-Move all groups that match some regular expression to a topic
-(@code{gnus-topic-move-matching}).
-
-@item T C
-@kindex T C (Topic)
-@findex gnus-topic-copy-matching
-Copy all groups that match some regular expression to a topic
-(@code{gnus-topic-copy-matching}).
-
-@item T H
-@kindex T H (Topic)
-@findex gnus-topic-toggle-display-empty-topics
-Toggle hiding empty topics
-(@code{gnus-topic-toggle-display-empty-topics}).
-
-@item T #
-@kindex T # (Topic)
-@findex gnus-topic-mark-topic
-Mark all groups in the current topic with the process mark
-(@code{gnus-topic-mark-topic}).
-
-@item T M-#
-@kindex T M-# (Topic)
-@findex gnus-topic-unmark-topic
-Remove the process mark from all groups in the current topic
-(@code{gnus-topic-unmark-topic}).
-
-@item T TAB
-@itemx TAB
-@kindex T TAB (Topic)
-@kindex TAB (Topic)
-@findex gnus-topic-indent
-``Indent'' the current topic so that it becomes a sub-topic of the
-previous topic (@code{gnus-topic-indent}). If given a prefix,
-``un-indent'' the topic instead.
-
-@item M-TAB
-@kindex M-TAB (Topic)
-@findex gnus-topic-unindent
-``Un-indent'' the current topic so that it becomes a sub-topic of the
-parent of its current parent (@code{gnus-topic-unindent}).
-
-@item RET
-@kindex RET (Topic)
-@findex gnus-topic-select-group
-@itemx SPACE
-Either select a group or fold a topic (@code{gnus-topic-select-group}).
-When you perform this command on a group, you'll enter the group, as
-usual. When done on a topic line, the topic will be folded (if it was
-visible) or unfolded (if it was folded already). So it's basically a
-toggling command on topics. In addition, if you give a numerical
-prefix, group on that level (and lower) will be displayed.
-
-@item C-c C-x
-@kindex C-c C-x (Topic)
-@findex gnus-topic-expire-articles
-Run all expirable articles in the current group or topic through the expiry
-process (if any) (@code{gnus-topic-expire-articles}).
-
-@item C-k
-@kindex C-k (Topic)
-@findex gnus-topic-kill-group
-Kill a group or topic (@code{gnus-topic-kill-group}). All groups in the
-topic will be removed along with the topic.
-
-@item C-y
-@kindex C-y (Topic)
-@findex gnus-topic-yank-group
-Yank the previously killed group or topic
-(@code{gnus-topic-yank-group}). Note that all topics will be yanked
-before all groups.
-
-@item T r
-@kindex T r (Topic)
-@findex gnus-topic-rename
-Rename a topic (@code{gnus-topic-rename}).
-
-@item T DEL
-@kindex T DEL (Topic)
-@findex gnus-topic-delete
-Delete an empty topic (@code{gnus-topic-delete}).
-
-@item A T
-@kindex A T (Topic)
-@findex gnus-topic-list-active
-List all groups that Gnus knows about in a topics-ified way
-(@code{gnus-topic-list-active}).
-
-@item G p
-@kindex G p (Topic)
-@findex gnus-topic-edit-parameters
-@cindex group parameters
-@cindex topic parameters
-@cindex parameters
-Edit the topic parameters (@code{gnus-topic-edit-parameters}).
-@xref{Topic Parameters}.
-
-@end table
-
-
-@node Topic Sorting
-@subsection Topic Sorting
-@cindex topic sorting
-
-You can sort the groups in each topic individually with the following
-commands:
-
-
-@table @kbd
-@item T S a
-@kindex T S a (Topic)
-@findex gnus-topic-sort-groups-by-alphabet
-Sort the current topic alphabetically by group name
-(@code{gnus-topic-sort-groups-by-alphabet}).
-
-@item T S u
-@kindex T S u (Topic)
-@findex gnus-topic-sort-groups-by-unread
-Sort the current topic by the number of unread articles
-(@code{gnus-topic-sort-groups-by-unread}).
-
-@item T S l
-@kindex T S l (Topic)
-@findex gnus-topic-sort-groups-by-level
-Sort the current topic by group level
-(@code{gnus-topic-sort-groups-by-level}).
-
-@item T S v
-@kindex T S v (Topic)
-@findex gnus-topic-sort-groups-by-score
-Sort the current topic by group score
-(@code{gnus-topic-sort-groups-by-score}). @xref{Group Score}.
-
-@item T S r
-@kindex T S r (Topic)
-@findex gnus-topic-sort-groups-by-rank
-Sort the current topic by group rank
-(@code{gnus-topic-sort-groups-by-rank}). @xref{Group Score}.
-
-@item T S m
-@kindex T S m (Topic)
-@findex gnus-topic-sort-groups-by-method
-Sort the current topic alphabetically by backend name
-(@code{gnus-topic-sort-groups-by-method}).
-
-@end table
-
-@xref{Sorting Groups} for more information about group sorting.
-
-
-@node Topic Topology
-@subsection Topic Topology
-@cindex topic topology
-@cindex topology
-
-So, let's have a look at an example group buffer:
-
-@example
-Gnus
- Emacs -- I wuw it!
- 3: comp.emacs
- 2: alt.religion.emacs
- Naughty Emacs
- 452: alt.sex.emacs
- 0: comp.talk.emacs.recovery
- Misc
- 8: comp.binaries.fractals
- 13: comp.sources.unix
-@end example
-
-So, here we have one top-level topic (@samp{Gnus}), two topics under
-that, and one sub-topic under one of the sub-topics. (There is always
-just one (1) top-level topic). This topology can be expressed as
-follows:
-
-@lisp
-(("Gnus" visible)
- (("Emacs -- I wuw it!" visible)
- (("Naughty Emacs" visible)))
- (("Misc" visible)))
-@end lisp
-
-@vindex gnus-topic-topology
-This is in fact how the variable @code{gnus-topic-topology} would look
-for the display above. That variable is saved in the @file{.newsrc.eld}
-file, and shouldn't be messed with manually---unless you really want
-to. Since this variable is read from the @file{.newsrc.eld} file,
-setting it in any other startup files will have no effect.
-
-This topology shows what topics are sub-topics of what topics (right),
-and which topics are visible. Two settings are currently
-allowed---@code{visible} and @code{invisible}.
-
-
-@node Topic Parameters
-@subsection Topic Parameters
-@cindex topic parameters
-
-All groups in a topic will inherit group parameters from the parent (and
-ancestor) topic parameters. All valid group parameters are valid topic
-parameters (@pxref{Group Parameters}).
-
-Group parameters (of course) override topic parameters, and topic
-parameters in sub-topics override topic parameters in super-topics. You
-know. Normal inheritance rules. (@dfn{Rules} is here a noun, not a
-verb, although you may feel free to disagree with me here.)
-
-@example
-Gnus
- Emacs
- 3: comp.emacs
- 2: alt.religion.emacs
- 452: alt.sex.emacs
- Relief
- 452: alt.sex.emacs
- 0: comp.talk.emacs.recovery
- Misc
- 8: comp.binaries.fractals
- 13: comp.sources.unix
- 452: alt.sex.emacs
-@end example
-
-The @samp{Emacs} topic has the topic parameter @code{(score-file
-. "emacs.SCORE")}; the @samp{Relief} topic has the topic parameter
-@code{(score-file . "relief.SCORE")}; and the @samp{Misc} topic has the
-topic parameter @code{(score-file . "emacs.SCORE")}. In addition,
-@* @samp{alt.religion.emacs} has the group parameter @code{(score-file
-. "religion.SCORE")}.
-
-Now, when you enter @samp{alt.sex.emacs} in the @samp{Relief} topic, you
-will get the @file{relief.SCORE} home score file. If you enter the same
-group in the @samp{Emacs} topic, you'll get the @file{emacs.SCORE} home
-score file. If you enter the group @samp{alt.religion.emacs}, you'll
-get the @file{religion.SCORE} home score file.
-
-This seems rather simple and self-evident, doesn't it? Well, yes. But
-there are some problems, especially with the @code{total-expiry}
-parameter. Say you have a mail group in two topics; one with
-@code{total-expiry} and one without. What happens when you do @kbd{M-x
-gnus-expire-all-expirable-groups}? Gnus has no way of telling which one
-of these topics you mean to expire articles from, so anything may
-happen. In fact, I hereby declare that it is @dfn{undefined} what
-happens. You just have to be careful if you do stuff like that.
-
-
-@node Misc Group Stuff
-@section Misc Group Stuff
-
-@menu
-* Scanning New Messages:: Asking Gnus to see whether new messages have arrived.
-* Group Information:: Information and help on groups and Gnus.
-* Group Timestamp:: Making Gnus keep track of when you last read a group.
-* File Commands:: Reading and writing the Gnus files.
-@end menu
-
-@table @kbd
-
-@item ^
-@kindex ^ (Group)
-@findex gnus-group-enter-server-mode
-Enter the server buffer (@code{gnus-group-enter-server-mode}).
-@xref{The Server Buffer}.
-
-@item a
-@kindex a (Group)
-@findex gnus-group-post-news
-Post an article to a group (@code{gnus-group-post-news}). If given a
-prefix, the current group name will be used as the default.
-
-@item m
-@kindex m (Group)
-@findex gnus-group-mail
-Mail a message somewhere (@code{gnus-group-mail}).
-
-@end table
-
-Variables for the group buffer:
-
-@table @code
-
-@item gnus-group-mode-hook
-@vindex gnus-group-mode-hook
-is called after the group buffer has been
-created.
-
-@item gnus-group-prepare-hook
-@vindex gnus-group-prepare-hook
-is called after the group buffer is
-generated. It may be used to modify the buffer in some strange,
-unnatural way.
-
-@item gnus-group-prepared-hook
-@vindex gnus-group-prepare-hook
-is called as the very last thing after the group buffer has been
-generated. It may be used to move point around, for instance.
-
-@item gnus-permanently-visible-groups
-@vindex gnus-permanently-visible-groups
-Groups matching this regexp will always be listed in the group buffer,
-whether they are empty or not.
-
-@end table
-
-
-@node Scanning New Messages
-@subsection Scanning New Messages
-@cindex new messages
-@cindex scanning new news
-
-@table @kbd
-
-@item g
-@kindex g (Group)
-@findex gnus-group-get-new-news
-@c @icon{gnus-group-get-new-news}
-Check the server(s) for new articles. If the numerical prefix is used,
-this command will check only groups of level @var{arg} and lower
-(@code{gnus-group-get-new-news}). If given a non-numerical prefix, this
-command will force a total re-reading of the active file(s) from the
-backend(s).
-
-@item M-g
-@kindex M-g (Group)
-@findex gnus-group-get-new-news-this-group
-@vindex gnus-goto-next-group-when-activating
-@c @icon{gnus-group-get-new-news-this-group}
-Check whether new articles have arrived in the current group
-(@code{gnus-group-get-new-news-this-group}).
-@code{gnus-goto-next-group-when-activating} says whether this command is
-to move point to the next group or not. It is @code{t} by default.
-
-@findex gnus-activate-all-groups
-@cindex activating groups
-@item C-c M-g
-@kindex C-c M-g (Group)
-Activate absolutely all groups (@code{gnus-activate-all-groups}).
-
-@item R
-@kindex R (Group)
-@cindex restarting
-@findex gnus-group-restart
-Restart Gnus (@code{gnus-group-restart}). This saves the @file{.newsrc}
-file(s), closes the connection to all servers, clears up all run-time
-Gnus variables, and then starts Gnus all over again.
-
-@end table
-
-@vindex gnus-get-new-news-hook
-@code{gnus-get-new-news-hook} is run just before checking for new news.
-
-@vindex gnus-after-getting-new-news-hook
-@code{gnus-after-getting-new-news-hook} is run after checking for new
-news.
-
-
-@node Group Information
-@subsection Group Information
-@cindex group information
-@cindex information on groups
-
-@table @kbd
-
-
-@item H f
-@kindex H f (Group)
-@findex gnus-group-fetch-faq
-@vindex gnus-group-faq-directory
-@cindex FAQ
-@cindex ange-ftp
-Try to fetch the FAQ for the current group
-(@code{gnus-group-fetch-faq}). Gnus will try to get the FAQ from
-@code{gnus-group-faq-directory}, which is usually a directory on a
-remote machine. This variable can also be a list of directories. In
-that case, giving a prefix to this command will allow you to choose
-between the various sites. @code{ange-ftp} (or @code{efs}) will be used
-for fetching the file.
-
-If fetching from the first site is unsuccessful, Gnus will attempt to go
-through @code{gnus-group-faq-directory} and try to open them one by one.
-
-@item H d
-@itemx C-c C-d
-@c @icon{gnus-group-describe-group}
-@kindex H d (Group)
-@kindex C-c C-d (Group)
-@cindex describing groups
-@cindex group description
-@findex gnus-group-describe-group
-Describe the current group (@code{gnus-group-describe-group}). If given
-a prefix, force Gnus to re-read the description from the server.
-
-@item M-d
-@kindex M-d (Group)
-@findex gnus-group-describe-all-groups
-Describe all groups (@code{gnus-group-describe-all-groups}). If given a
-prefix, force Gnus to re-read the description file from the server.
-
-@item H v
-@itemx V
-@kindex V (Group)
-@kindex H v (Group)
-@cindex version
-@findex gnus-version
-Display current Gnus version numbers (@code{gnus-version}).
-
-@item ?
-@kindex ? (Group)
-@findex gnus-group-describe-briefly
-Give a very short help message (@code{gnus-group-describe-briefly}).
-
-@item C-c C-i
-@kindex C-c C-i (Group)
-@cindex info
-@cindex manual
-@findex gnus-info-find-node
-Go to the Gnus info node (@code{gnus-info-find-node}).
-@end table
-
-
-@node Group Timestamp
-@subsection Group Timestamp
-@cindex timestamps
-@cindex group timestamps
-
-It can be convenient to let Gnus keep track of when you last read a
-group. To set the ball rolling, you should add
-@code{gnus-group-set-timestamp} to @code{gnus-select-group-hook}:
-
-@lisp
-(add-hook 'gnus-select-group-hook 'gnus-group-set-timestamp)
-@end lisp
-
-After doing this, each time you enter a group, it'll be recorded.
-
-This information can be displayed in various ways---the easiest is to
-use the @samp{%d} spec in the group line format:
-
-@lisp
-(setq gnus-group-line-format
- "%M\%S\%p\%P\%5y: %(%-40,40g%) %d\n")
-@end lisp
-
-This will result in lines looking like:
-
-@example
-* 0: mail.ding 19961002T012943
- 0: custom 19961002T012713
-@end example
-
-As you can see, the date is displayed in compact ISO 8601 format. This
-may be a bit too much, so to just display the date, you could say
-something like:
-
-@lisp
-(setq gnus-group-line-format
- "%M\%S\%p\%P\%5y: %(%-40,40g%) %6,6~(cut 2)d\n")
-@end lisp
-
-
-@node File Commands
-@subsection File Commands
-@cindex file commands
-
-@table @kbd
-
-@item r
-@kindex r (Group)
-@findex gnus-group-read-init-file
-@vindex gnus-init-file
-@cindex reading init file
-Re-read the init file (@code{gnus-init-file}, which defaults to
-@file{~/.gnus}) (@code{gnus-group-read-init-file}).
-
-@item s
-@kindex s (Group)
-@findex gnus-group-save-newsrc
-@cindex saving .newsrc
-Save the @file{.newsrc.eld} file (and @file{.newsrc} if wanted)
-(@code{gnus-group-save-newsrc}). If given a prefix, force saving the
-file(s) whether Gnus thinks it is necessary or not.
-
-@c @item Z
-@c @kindex Z (Group)
-@c @findex gnus-group-clear-dribble
-@c Clear the dribble buffer (@code{gnus-group-clear-dribble}).
-
-@end table
-
-
-@node The Summary Buffer
-@chapter The Summary Buffer
-@cindex summary buffer
-
-A line for each article is displayed in the summary buffer. You can
-move around, read articles, post articles and reply to articles.
-
-The most common way to a summary buffer is to select a group from the
-group buffer (@pxref{Selecting a Group}).
-
-You can have as many summary buffers open as you wish.
-
-@menu
-* Summary Buffer Format:: Deciding how the summary buffer is to look.
-* Summary Maneuvering:: Moving around the summary buffer.
-* Choosing Articles:: Reading articles.
-* Paging the Article:: Scrolling the current article.
-* Reply Followup and Post:: Posting articles.
-* Canceling and Superseding:: ``Whoops, I shouldn't have called him that.''
-* Marking Articles:: Marking articles as read, expirable, etc.
-* Limiting:: You can limit the summary buffer.
-* Threading:: How threads are made.
-* Sorting:: How articles and threads are sorted.
-* Asynchronous Fetching:: Gnus might be able to pre-fetch articles.
-* Article Caching:: You may store articles in a cache.
-* Persistent Articles:: Making articles expiry-resistant.
-* Article Backlog:: Having already read articles hang around.
-* Saving Articles:: Ways of customizing article saving.
-* Decoding Articles:: Gnus can treat series of (uu)encoded articles.
-* Article Treatment:: The article buffer can be mangled at will.
-* MIME Commands:: Doing MIMEy things with the articles.
-* Article Commands:: Doing various things with the article buffer.
-* Summary Sorting:: Sorting the summary buffer in various ways.
-* Finding the Parent:: No child support? Get the parent.
-* Alternative Approaches:: Reading using non-default summaries.
-* Tree Display:: A more visual display of threads.
-* Mail Group Commands:: Some commands can only be used in mail groups.
-* Various Summary Stuff:: What didn't fit anywhere else.
-* Exiting the Summary Buffer:: Returning to the Group buffer.
-* Crosspost Handling:: How crossposted articles are dealt with.
-* Duplicate Suppression:: An alternative when crosspost handling fails.
-@end menu
-
-
-@node Summary Buffer Format
-@section Summary Buffer Format
-@cindex summary buffer format
-
-@iftex
-@iflatex
-\gnusfigure{The Summary Buffer}{180}{
-\put(0,0){\epsfig{figure=tmp/summary.ps,width=7.5cm}}
-\put(445,0){\makebox(0,0)[br]{\epsfig{figure=tmp/summary-article.ps,width=7.5cm}}}
-}
-@end iflatex
-@end iftex
-
-@menu
-* Summary Buffer Lines:: You can specify how summary lines should look.
-* To From Newsgroups:: How to not display your own name.
-* Summary Buffer Mode Line:: You can say how the mode line should look.
-* Summary Highlighting:: Making the summary buffer all pretty and nice.
-@end menu
-
-@findex mail-extract-address-components
-@findex gnus-extract-address-components
-@vindex gnus-extract-address-components
-Gnus will use the value of the @code{gnus-extract-address-components}
-variable as a function for getting the name and address parts of a
-@code{From} header. Two pre-defined functions exist:
-@code{gnus-extract-address-components}, which is the default, quite
-fast, and too simplistic solution; and
-@code{mail-extract-address-components}, which works very nicely, but is
-slower. The default function will return the wrong answer in 5% of the
-cases. If this is unacceptable to you, use the other function instead:
-
-@lisp
-(setq gnus-extract-address-components
- 'mail-extract-address-components)
-@end lisp
-
-@vindex gnus-summary-same-subject
-@code{gnus-summary-same-subject} is a string indicating that the current
-article has the same subject as the previous. This string will be used
-with those specs that require it. The default is @code{""}.
-
-
-@node Summary Buffer Lines
-@subsection Summary Buffer Lines
-
-@vindex gnus-summary-line-format
-You can change the format of the lines in the summary buffer by changing
-the @code{gnus-summary-line-format} variable. It works along the same
-lines as a normal @code{format} string, with some extensions
-(@pxref{Formatting Variables}).
-
-The default string is @samp{%U%R%z%I%(%[%4L: %-20,20n%]%) %s\n}.
-
-The following format specification characters are understood:
-
-@table @samp
-@item N
-Article number.
-@item S
-Subject string.
-@item s
-Subject if the article is the root of the thread or the previous article
-had a different subject, @code{gnus-summary-same-subject} otherwise.
-(@code{gnus-summary-same-subject} defaults to @code{""}.)
-@item F
-Full @code{From} header.
-@item n
-The name (from the @code{From} header).
-@item f
-The name, code @code{To} header or the @code{Newsgroups} header
-(@pxref{To From Newsgroups}).
-@item a
-The name (from the @code{From} header). This differs from the @code{n}
-spec in that it uses the function designated by the
-@code{gnus-extract-address-components} variable, which is slower, but
-may be more thorough.
-@item A
-The address (from the @code{From} header). This works the same way as
-the @code{a} spec.
-@item L
-Number of lines in the article.
-@item c
-Number of characters in the article.
-@item I
-Indentation based on thread level (@pxref{Customizing Threading}).
-@item T
-Nothing if the article is a root and lots of spaces if it isn't (it
-pushes everything after it off the screen).
-@item [
-Opening bracket, which is normally @samp{[}, but can also be @samp{<}
-for adopted articles (@pxref{Customizing Threading}).
-@item ]
-Closing bracket, which is normally @samp{]}, but can also be @samp{>}
-for adopted articles.
-@item >
-One space for each thread level.
-@item <
-Twenty minus thread level spaces.
-@item U
-Unread.
-
-@item R
-This misleadingly named specifier is the @dfn{secondary mark}. This
-mark will say whether the article has been replied to, has been cached,
-or has been saved.
-
-@item i
-Score as a number (@pxref{Scoring}).
-@item z
-@vindex gnus-summary-zcore-fuzz
-Zcore, @samp{+} if above the default level and @samp{-} if below the
-default level. If the difference between
-@code{gnus-summary-default-score} and the score is less than
-@code{gnus-summary-zcore-fuzz}, this spec will not be used.
-@item V
-Total thread score.
-@item x
-@code{Xref}.
-@item D
-@code{Date}.
-@item d
-The @code{Date} in @code{DD-MMM} format.
-@item o
-The @code{Date} in @var{YYYYMMDD}@code{T}@var{HHMMSS} format.
-@item M
-@code{Message-ID}.
-@item r
-@code{References}.
-@item t
-Number of articles in the current sub-thread. Using this spec will slow
-down summary buffer generation somewhat.
-@item e
-An @samp{=} (@code{gnus-not-empty-thread-mark}) will be displayed if the
-article has any children.
-@item P
-The line number.
-@item O
-Download mark.
-@item u
-User defined specifier. The next character in the format string should
-be a letter. Gnus will call the function
-@code{gnus-user-format-function-}@samp{X}, where @samp{X} is the letter
-following @samp{%u}. The function will be passed the current header as
-argument. The function should return a string, which will be inserted
-into the summary just like information from any other summary specifier.
-@end table
-
-The @samp{%U} (status), @samp{%R} (replied) and @samp{%z} (zcore) specs
-have to be handled with care. For reasons of efficiency, Gnus will
-compute what column these characters will end up in, and ``hard-code''
-that. This means that it is invalid to have these specs after a
-variable-length spec. Well, you might not be arrested, but your summary
-buffer will look strange, which is bad enough.
-
-The smart choice is to have these specs as far to the left as possible.
-(Isn't that the case with everything, though? But I digress.)
-
-This restriction may disappear in later versions of Gnus.
-
-
-@node To From Newsgroups
-@subsection To From Newsgroups
-@cindex To
-@cindex Newsgroups
-
-In some groups (particularly in archive groups), the @code{From} header
-isn't very interesting, since all the articles there are written by
-you. To display the information in the @code{To} or @code{Newsgroups}
-headers instead, you need to decide three things: What information to
-gather; where to display it; and when to display it.
-
-@enumerate
-@item
-@vindex gnus-extra-headers
-The reading of extra header information is controlled by the
-@code{gnus-extra-headers}. This is a list of header symbols. For
-instance:
-
-@lisp
-(setq gnus-extra-headers
- '(To Newsgroups X-Newsreader))
-@end lisp
-
-This will result in Gnus trying to obtain these three headers, and
-storing it in header structures for later easy retrieval.
-
-@item
-@findex gnus-extra-header
-The value of these extra headers can be accessed via the
-@code{gnus-extra-header} function. Here's a format line spec that will
-access the @code{X-Newsreader} header:
-
-@example
-"%~(form (gnus-extra-header 'X-Newsreader))@@"
-@end example
-
-@item
-@vindex gnus-ignored-from-addresses
-The @code{gnus-ignored-from-addresses} variable says when the @samp{%f}
-summary line spec returns the @code{To}, @code{Newsreader} or
-@code{From} header. If this regexp matches the contents of the
-@code{From} header, the value of the @code{To} or @code{Newsreader}
-headers are used instead.
-
-@end enumerate
-
-@vindex nnmail-extra-headers
-A related variable is @code{nnmail-extra-headers}, which controls when
-to include extra headers when generating overview (@sc{nov}) files.
-
-In summary, you'd typically do something like the following:
-
-@lisp
-(setq gnus-extra-headers
- '(To Newsgroups))
-(setq nnmail-extra-headers gnus-extra-headers)
-(setq gnus-summary-line-format
- "%U%R%z%I%(%[%4L: %-20,20f%]%) %s\n")
-(setq gnus-ignored-from-addresses
- "Your Name Here")
-@end lisp
-
-Now, this is mostly useful for mail groups, where you have control over
-the @sc{nov} files that are created. However, if you can persuade your
-nntp admin to add:
-
-@example
-Newsgroups:full
-@end example
-
-to the end of her @file{overview.fmt} file, then you can use that just
-as you would the extra headers from the mail groups.
-
-
-@node Summary Buffer Mode Line
-@subsection Summary Buffer Mode Line
-
-@vindex gnus-summary-mode-line-format
-You can also change the format of the summary mode bar (@pxref{Mode Line
-Formatting}). Set @code{gnus-summary-mode-line-format} to whatever you
-like. The default is @samp{Gnus: %%b [%A] %Z}.
-
-Here are the elements you can play with:
-
-@table @samp
-@item G
-Group name.
-@item p
-Unprefixed group name.
-@item A
-Current article number.
-@item z
-Current article score.
-@item V
-Gnus version.
-@item U
-Number of unread articles in this group.
-@item e
-Number of unread articles in this group that aren't displayed in the
-summary buffer.
-@item Z
-A string with the number of unread and unselected articles represented
-either as @samp{<%U(+%e) more>} if there are both unread and unselected
-articles, and just as @samp{<%U more>} if there are just unread articles
-and no unselected ones.
-@item g
-Shortish group name. For instance, @samp{rec.arts.anime} will be
-shortened to @samp{r.a.anime}.
-@item S
-Subject of the current article.
-@item u
-User-defined spec (@pxref{User-Defined Specs}).
-@item s
-Name of the current score file (@pxref{Scoring}).
-@item d
-Number of dormant articles (@pxref{Unread Articles}).
-@item t
-Number of ticked articles (@pxref{Unread Articles}).
-@item r
-Number of articles that have been marked as read in this session.
-@item E
-Number of articles expunged by the score files.
-@end table
-
-
-@node Summary Highlighting
-@subsection Summary Highlighting
-
-@table @code
-
-@item gnus-visual-mark-article-hook
-@vindex gnus-visual-mark-article-hook
-This hook is run after selecting an article. It is meant to be used for
-highlighting the article in some way. It is not run if
-@code{gnus-visual} is @code{nil}.
-
-@item gnus-summary-update-hook
-@vindex gnus-summary-update-hook
-This hook is called when a summary line is changed. It is not run if
-@code{gnus-visual} is @code{nil}.
-
-@item gnus-summary-selected-face
-@vindex gnus-summary-selected-face
-This is the face (or @dfn{font} as some people call it) used to
-highlight the current article in the summary buffer.
-
-@item gnus-summary-highlight
-@vindex gnus-summary-highlight
-Summary lines are highlighted according to this variable, which is a
-list where the elements are of the format @var{(FORM . FACE)}. If you
-would, for instance, like ticked articles to be italic and high-scored
-articles to be bold, you could set this variable to something like
-@lisp
-(((eq mark gnus-ticked-mark) . italic)
- ((> score default) . bold))
-@end lisp
-As you may have guessed, if @var{FORM} returns a non-@code{nil} value,
-@var{FACE} will be applied to the line.
-@end table
-
-
-@node Summary Maneuvering
-@section Summary Maneuvering
-@cindex summary movement
-
-All the straight movement commands understand the numeric prefix and
-behave pretty much as you'd expect.
-
-None of these commands select articles.
-
-@table @kbd
-@item G M-n
-@itemx M-n
-@kindex M-n (Summary)
-@kindex G M-n (Summary)
-@findex gnus-summary-next-unread-subject
-Go to the next summary line of an unread article
-(@code{gnus-summary-next-unread-subject}).
-
-@item G M-p
-@itemx M-p
-@kindex M-p (Summary)
-@kindex G M-p (Summary)
-@findex gnus-summary-prev-unread-subject
-Go to the previous summary line of an unread article
-(@code{gnus-summary-prev-unread-subject}).
-
-@item G j
-@itemx j
-@kindex j (Summary)
-@kindex G j (Summary)
-@findex gnus-summary-goto-article
-Ask for an article number or @code{Message-ID}, and then go to that
-article (@code{gnus-summary-goto-article}).
-
-@item G g
-@kindex G g (Summary)
-@findex gnus-summary-goto-subject
-Ask for an article number and then go to the summary line of that article
-without displaying the article (@code{gnus-summary-goto-subject}).
-@end table
-
-If Gnus asks you to press a key to confirm going to the next group, you
-can use the @kbd{C-n} and @kbd{C-p} keys to move around the group
-buffer, searching for the next group to read without actually returning
-to the group buffer.
-
-Variables related to summary movement:
-
-@table @code
-
-@vindex gnus-auto-select-next
-@item gnus-auto-select-next
-If you issue one of the movement commands (like @kbd{n}) and there are
-no more unread articles after the current one, Gnus will offer to go to
-the next group. If this variable is @code{t} and the next group is
-empty, Gnus will exit summary mode and return to the group buffer. If
-this variable is neither @code{t} nor @code{nil}, Gnus will select the
-next group, no matter whether it has any unread articles or not. As a
-special case, if this variable is @code{quietly}, Gnus will select the
-next group without asking for confirmation. If this variable is
-@code{almost-quietly}, the same will happen only if you are located on
-the last article in the group. Finally, if this variable is
-@code{slightly-quietly}, the @kbd{Z n} command will go to the next group
-without confirmation. Also @pxref{Group Levels}.
-
-@item gnus-auto-select-same
-@vindex gnus-auto-select-same
-If non-@code{nil}, all the movement commands will try to go to the next
-article with the same subject as the current. (@dfn{Same} here might
-mean @dfn{roughly equal}. See @code{gnus-summary-gather-subject-limit}
-for details (@pxref{Customizing Threading}).) If there are no more
-articles with the same subject, go to the first unread article.
-
-This variable is not particularly useful if you use a threaded display.
-
-@item gnus-summary-check-current
-@vindex gnus-summary-check-current
-If non-@code{nil}, all the ``unread'' movement commands will not proceed
-to the next (or previous) article if the current article is unread.
-Instead, they will choose the current article.
-
-@item gnus-auto-center-summary
-@vindex gnus-auto-center-summary
-If non-@code{nil}, Gnus will keep the point in the summary buffer
-centered at all times. This makes things quite tidy, but if you have a
-slow network connection, or simply do not like this un-Emacsism, you can
-set this variable to @code{nil} to get the normal Emacs scrolling
-action. This will also inhibit horizontal re-centering of the summary
-buffer, which might make it more inconvenient to read extremely long
-threads.
-
-This variable can also be a number. In that case, center the window at
-the given number of lines from the top.
-
-@end table
-
-
-@node Choosing Articles
-@section Choosing Articles
-@cindex selecting articles
-
-@menu
-* Choosing Commands:: Commands for choosing articles.
-* Choosing Variables:: Variables that influence these commands.
-@end menu
-
-
-@node Choosing Commands
-@subsection Choosing Commands
-
-None of the following movement commands understand the numeric prefix,
-and they all select and display an article.
-
-@table @kbd
-@item SPACE
-@kindex SPACE (Summary)
-@findex gnus-summary-next-page
-Select the current article, or, if that one's read already, the next
-unread article (@code{gnus-summary-next-page}).
-
-@item G n
-@itemx n
-@kindex n (Summary)
-@kindex G n (Summary)
-@findex gnus-summary-next-unread-article
-@c @icon{gnus-summary-next-unread}
-Go to next unread article (@code{gnus-summary-next-unread-article}).
-
-@item G p
-@itemx p
-@kindex p (Summary)
-@findex gnus-summary-prev-unread-article
-@c @icon{gnus-summary-prev-unread}
-Go to previous unread article (@code{gnus-summary-prev-unread-article}).
-
-@item G N
-@itemx N
-@kindex N (Summary)
-@kindex G N (Summary)
-@findex gnus-summary-next-article
-Go to the next article (@code{gnus-summary-next-article}).
-
-@item G P
-@itemx P
-@kindex P (Summary)
-@kindex G P (Summary)
-@findex gnus-summary-prev-article
-Go to the previous article (@code{gnus-summary-prev-article}).
-
-@item G C-n
-@kindex G C-n (Summary)
-@findex gnus-summary-next-same-subject
-Go to the next article with the same subject
-(@code{gnus-summary-next-same-subject}).
-
-@item G C-p
-@kindex G C-p (Summary)
-@findex gnus-summary-prev-same-subject
-Go to the previous article with the same subject
-(@code{gnus-summary-prev-same-subject}).
-
-@item G f
-@itemx .
-@kindex G f (Summary)
-@kindex . (Summary)
-@findex gnus-summary-first-unread-article
-Go to the first unread article
-(@code{gnus-summary-first-unread-article}).
-
-@item G b
-@itemx ,
-@kindex G b (Summary)
-@kindex , (Summary)
-@findex gnus-summary-best-unread-article
-Go to the article with the highest score
-(@code{gnus-summary-best-unread-article}).
-
-@item G l
-@itemx l
-@kindex l (Summary)
-@kindex G l (Summary)
-@findex gnus-summary-goto-last-article
-Go to the previous article read (@code{gnus-summary-goto-last-article}).
-
-@item G o
-@kindex G o (Summary)
-@findex gnus-summary-pop-article
-@cindex history
-@cindex article history
-Pop an article off the summary history and go to this article
-(@code{gnus-summary-pop-article}). This command differs from the
-command above in that you can pop as many previous articles off the
-history as you like, while @kbd{l} toggles the two last read articles.
-For a somewhat related issue (if you use these commands a lot),
-@pxref{Article Backlog}.
-@end table
-
-
-@node Choosing Variables
-@subsection Choosing Variables
-
-Some variables relevant for moving and selecting articles:
-
-@table @code
-@item gnus-auto-extend-newsgroup
-@vindex gnus-auto-extend-newsgroup
-All the movement commands will try to go to the previous (or next)
-article, even if that article isn't displayed in the Summary buffer if
-this variable is non-@code{nil}. Gnus will then fetch the article from
-the server and display it in the article buffer.
-
-@item gnus-select-article-hook
-@vindex gnus-select-article-hook
-This hook is called whenever an article is selected. By default it
-exposes any threads hidden under the selected article.
-
-@item gnus-mark-article-hook
-@vindex gnus-mark-article-hook
-@findex gnus-summary-mark-unread-as-read
-@findex gnus-summary-mark-read-and-unread-as-read
-@findex gnus-unread-mark
-This hook is called whenever an article is selected. It is intended to
-be used for marking articles as read. The default value is
-@code{gnus-summary-mark-read-and-unread-as-read}, and will change the
-mark of almost any article you read to @code{gnus-unread-mark}. The
-only articles not affected by this function are ticked, dormant, and
-expirable articles. If you'd instead like to just have unread articles
-marked as read, you can use @code{gnus-summary-mark-unread-as-read}
-instead. It will leave marks like @code{gnus-low-score-mark},
-@code{gnus-del-mark} (and so on) alone.
-
-@end table
-
-
-@node Paging the Article
-@section Scrolling the Article
-@cindex article scrolling
-
-@table @kbd
-
-@item SPACE
-@kindex SPACE (Summary)
-@findex gnus-summary-next-page
-Pressing @kbd{SPACE} will scroll the current article forward one page,
-or, if you have come to the end of the current article, will choose the
-next article (@code{gnus-summary-next-page}).
-
-@item DEL
-@kindex DEL (Summary)
-@findex gnus-summary-prev-page
-Scroll the current article back one page (@code{gnus-summary-prev-page}).
-
-@item RET
-@kindex RET (Summary)
-@findex gnus-summary-scroll-up
-Scroll the current article one line forward
-(@code{gnus-summary-scroll-up}).
-
-@item M-RET
-@kindex M-RET (Summary)
-@findex gnus-summary-scroll-down
-Scroll the current article one line backward
-(@code{gnus-summary-scroll-down}).
-
-@item A g
-@itemx g
-@kindex A g (Summary)
-@kindex g (Summary)
-@findex gnus-summary-show-article
-(Re)fetch the current article (@code{gnus-summary-show-article}). If
-given a prefix, fetch the current article, but don't run any of the
-article treatment functions. This will give you a ``raw'' article, just
-the way it came from the server.
-
-@item A <
-@itemx <
-@kindex < (Summary)
-@kindex A < (Summary)
-@findex gnus-summary-beginning-of-article
-Scroll to the beginning of the article
-(@code{gnus-summary-beginning-of-article}).
-
-@item A >
-@itemx >
-@kindex > (Summary)
-@kindex A > (Summary)
-@findex gnus-summary-end-of-article
-Scroll to the end of the article (@code{gnus-summary-end-of-article}).
-
-@item A s
-@itemx s
-@kindex A s (Summary)
-@kindex s (Summary)
-@findex gnus-summary-isearch-article
-Perform an isearch in the article buffer
-(@code{gnus-summary-isearch-article}).
-
-@item h
-@kindex h (Summary)
-@findex gnus-summary-select-article-buffer
-Select the article buffer (@code{gnus-summary-select-article-buffer}).
-
-@end table
-
-
-@node Reply Followup and Post
-@section Reply, Followup and Post
-
-@menu
-* Summary Mail Commands:: Sending mail.
-* Summary Post Commands:: Sending news.
-@end menu
-
-
-@node Summary Mail Commands
-@subsection Summary Mail Commands
-@cindex mail
-@cindex composing mail
-
-Commands for composing a mail message:
-
-@table @kbd
-
-@item S r
-@itemx r
-@kindex S r (Summary)
-@kindex r (Summary)
-@findex gnus-summary-reply
-@c @icon{gnus-summary-mail-reply}
-@c @icon{gnus-summary-reply}
-Mail a reply to the author of the current article
-(@code{gnus-summary-reply}).
-
-@item S R
-@itemx R
-@kindex R (Summary)
-@kindex S R (Summary)
-@findex gnus-summary-reply-with-original
-@c @icon{gnus-summary-reply-with-original}
-Mail a reply to the author of the current article and include the
-original message (@code{gnus-summary-reply-with-original}). This
-command uses the process/prefix convention.
-
-@item S w
-@kindex S w (Summary)
-@findex gnus-summary-wide-reply
-Mail a wide reply to the author of the current article
-(@code{gnus-summary-wide-reply}). A @dfn{wide reply} is a reply that
-goes out to all people listed in the @code{To}, @code{From} (or
-@code{Reply-to}) and @code{Cc} headers.
-
-@item S W
-@kindex S W (Summary)
-@findex gnus-summary-wide-reply-with-original
-Mail a wide reply to the current article and include the original
-message (@code{gnus-summary-wide-reply-with-original}). This command uses
-the process/prefix convention.
-
-@item S o m
-@kindex S o m (Summary)
-@findex gnus-summary-mail-forward
-@c @icon{gnus-summary-mail-forward}
-Forward the current article to some other person
-(@code{gnus-summary-mail-forward}). If given a prefix, include the full
-headers of the forwarded article.
-
-@item S m
-@itemx m
-@kindex m (Summary)
-@kindex S m (Summary)
-@findex gnus-summary-mail-other-window
-@c @icon{gnus-summary-mail-originate}
-Send a mail to some other person
-(@code{gnus-summary-mail-other-window}).
-
-@item S D b
-@kindex S D b (Summary)
-@findex gnus-summary-resend-bounced-mail
-@cindex bouncing mail
-If you have sent a mail, but the mail was bounced back to you for some
-reason (wrong address, transient failure), you can use this command to
-resend that bounced mail (@code{gnus-summary-resend-bounced-mail}). You
-will be popped into a mail buffer where you can edit the headers before
-sending the mail off again. If you give a prefix to this command, and
-the bounced mail is a reply to some other mail, Gnus will try to fetch
-that mail and display it for easy perusal of its headers. This might
-very well fail, though.
-
-@item S D r
-@kindex S D r (Summary)
-@findex gnus-summary-resend-message
-Not to be confused with the previous command,
-@code{gnus-summary-resend-message} will prompt you for an address to
-send the current message off to, and then send it to that place. The
-headers of the message won't be altered---but lots of headers that say
-@code{Resent-To}, @code{Resent-From} and so on will be added. This
-means that you actually send a mail to someone that has a @code{To}
-header that (probably) points to yourself. This will confuse people.
-So, natcherly you'll only do that if you're really eVIl.
-
-This command is mainly used if you have several accounts and want to
-ship a mail to a different account of yours. (If you're both
-@code{root} and @code{postmaster} and get a mail for @code{postmaster}
-to the @code{root} account, you may want to resend it to
-@code{postmaster}. Ordnung muß sein!
-
-This command understands the process/prefix convention
-(@pxref{Process/Prefix}).
-
-@item S O m
-@kindex S O m (Summary)
-@findex gnus-uu-digest-mail-forward
-Digest the current series (@pxref{Decoding Articles}) and forward the
-result using mail (@code{gnus-uu-digest-mail-forward}). This command
-uses the process/prefix convention (@pxref{Process/Prefix}).
-
-@item S M-c
-@kindex S M-c (Summary)
-@findex gnus-summary-mail-crosspost-complaint
-@cindex crossposting
-@cindex excessive crossposting
-Send a complaint about excessive crossposting to the author of the
-current article (@code{gnus-summary-mail-crosspost-complaint}).
-
-@findex gnus-crosspost-complaint
-This command is provided as a way to fight back against the current
-crossposting pandemic that's sweeping Usenet. It will compose a reply
-using the @code{gnus-crosspost-complaint} variable as a preamble. This
-command understands the process/prefix convention
-(@pxref{Process/Prefix}) and will prompt you before sending each mail.
-
-@end table
-
-Also @pxref{(message)Header Commands} for more information.
-
-
-@node Summary Post Commands
-@subsection Summary Post Commands
-@cindex post
-@cindex composing news
-
-Commands for posting a news article:
-
-@table @kbd
-@item S p
-@itemx a
-@kindex a (Summary)
-@kindex S p (Summary)
-@findex gnus-summary-post-news
-@c @icon{gnus-summary-post-news}
-Post an article to the current group
-(@code{gnus-summary-post-news}).
-
-@item S f
-@itemx f
-@kindex f (Summary)
-@kindex S f (Summary)
-@findex gnus-summary-followup
-@c @icon{gnus-summary-followup}
-Post a followup to the current article (@code{gnus-summary-followup}).
-
-@item S F
-@itemx F
-@kindex S F (Summary)
-@kindex F (Summary)
-@c @icon{gnus-summary-followup-with-original}
-@findex gnus-summary-followup-with-original
-Post a followup to the current article and include the original message
-(@code{gnus-summary-followup-with-original}). This command uses the
-process/prefix convention.
-
-@item S n
-@kindex S n (Summary)
-@findex gnus-summary-followup-to-mail
-Post a followup to the current article via news, even if you got the
-message through mail (@code{gnus-summary-followup-to-mail}).
-
-@item S N
-@kindex S N (Summary)
-@findex gnus-summary-followup-to-mail-with-original
-Post a followup to the current article via news, even if you got the
-message through mail and include the original message
-(@code{gnus-summary-followup-to-mail-with-original}). This command uses
-the process/prefix convention.
-
-@item S o p
-@kindex S o p (Summary)
-@findex gnus-summary-post-forward
-Forward the current article to a newsgroup
-(@code{gnus-summary-post-forward}). If given a prefix, include the full
-headers of the forwarded article.
-
-@item S O p
-@kindex S O p (Summary)
-@findex gnus-uu-digest-post-forward
-@cindex digests
-@cindex making digests
-Digest the current series and forward the result to a newsgroup
-(@code{gnus-uu-digest-mail-forward}). This command uses the
-process/prefix convention.
-
-@item S u
-@kindex S u (Summary)
-@findex gnus-uu-post-news
-@c @icon{gnus-uu-post-news}
-Uuencode a file, split it into parts, and post it as a series
-(@code{gnus-uu-post-news}). (@pxref{Uuencoding and Posting}).
-@end table
-
-Also @pxref{(message)Header Commands} for more information.
-
-
-@node Canceling and Superseding
-@section Canceling Articles
-@cindex canceling articles
-@cindex superseding articles
-
-Have you ever written something, and then decided that you really,
-really, really wish you hadn't posted that?
-
-Well, you can't cancel mail, but you can cancel posts.
-
-@findex gnus-summary-cancel-article
-@kindex C (Summary)
-@c @icon{gnus-summary-cancel-article}
-Find the article you wish to cancel (you can only cancel your own
-articles, so don't try any funny stuff). Then press @kbd{C} or @kbd{S
-c} (@code{gnus-summary-cancel-article}). Your article will be
-canceled---machines all over the world will be deleting your article.
-This command uses the process/prefix convention (@pxref{Process/Prefix}).
-
-Be aware, however, that not all sites honor cancels, so your article may
-live on here and there, while most sites will delete the article in
-question.
-
-Gnus will use the ``current'' select method when canceling. If you
-want to use the standard posting method, use the @samp{a} symbolic
-prefix (@pxref{Symbolic Prefixes}).
-
-If you discover that you have made some mistakes and want to do some
-corrections, you can post a @dfn{superseding} article that will replace
-your original article.
-
-@findex gnus-summary-supersede-article
-@kindex S (Summary)
-Go to the original article and press @kbd{S s}
-(@code{gnus-summary-supersede-article}). You will be put in a buffer
-where you can edit the article all you want before sending it off the
-usual way.
-
-The same goes for superseding as for canceling, only more so: Some
-sites do not honor superseding. On those sites, it will appear that you
-have posted almost the same article twice.
-
-If you have just posted the article, and change your mind right away,
-there is a trick you can use to cancel/supersede the article without
-waiting for the article to appear on your site first. You simply return
-to the post buffer (which is called @code{*sent ...*}). There you will
-find the article you just posted, with all the headers intact. Change
-the @code{Message-ID} header to a @code{Cancel} or @code{Supersedes}
-header by substituting one of those words for the word
-@code{Message-ID}. Then just press @kbd{C-c C-c} to send the article as
-you would do normally. The previous article will be
-canceled/superseded.
-
-Just remember, kids: There is no 'c' in 'supersede'.
-
-
-@node Marking Articles
-@section Marking Articles
-@cindex article marking
-@cindex article ticking
-@cindex marks
-
-There are several marks you can set on an article.
-
-You have marks that decide the @dfn{readedness} (whoo, neato-keano
-neologism ohoy!) of the article. Alphabetic marks generally mean
-@dfn{read}, while non-alphabetic characters generally mean @dfn{unread}.
-
-In addition, you also have marks that do not affect readedness.
-
-@menu
-* Unread Articles:: Marks for unread articles.
-* Read Articles:: Marks for read articles.
-* Other Marks:: Marks that do not affect readedness.
-@end menu
-
-@ifinfo
-There's a plethora of commands for manipulating these marks:
-@end ifinfo
-
-@menu
-* Setting Marks:: How to set and remove marks.
-* Setting Process Marks:: How to mark articles for later processing.
-@end menu
-
-
-@node Unread Articles
-@subsection Unread Articles
-
-The following marks mark articles as (kinda) unread, in one form or
-other.
-
-@table @samp
-@item !
-@vindex gnus-ticked-mark
-Marked as ticked (@code{gnus-ticked-mark}).
-
-@dfn{Ticked articles} are articles that will remain visible always. If
-you see an article that you find interesting, or you want to put off
-reading it, or replying to it, until sometime later, you'd typically
-tick it. However, articles can be expired, so if you want to keep an
-article forever, you'll have to make it persistent (@pxref{Persistent
-Articles}).
-
-@item ?
-@vindex gnus-dormant-mark
-Marked as dormant (@code{gnus-dormant-mark}).
-
-@dfn{Dormant articles} will only appear in the summary buffer if there
-are followups to it. If you want to see them even if they don't have
-followups, you can use the @kbd{/ D} command (@pxref{Limiting}).
-
-@item SPACE
-@vindex gnus-unread-mark
-Marked as unread (@code{gnus-unread-mark}).
-
-@dfn{Unread articles} are articles that haven't been read at all yet.
-@end table
-
-
-@node Read Articles
-@subsection Read Articles
-@cindex expirable mark
-
-All the following marks mark articles as read.
-
-@table @samp
-
-@item r
-@vindex gnus-del-mark
-These are articles that the user has marked as read with the @kbd{d}
-command manually, more or less (@code{gnus-del-mark}).
-
-@item R
-@vindex gnus-read-mark
-Articles that have actually been read (@code{gnus-read-mark}).
-
-@item O
-@vindex gnus-ancient-mark
-Articles that were marked as read in previous sessions and are now
-@dfn{old} (@code{gnus-ancient-mark}).
-
-@item K
-@vindex gnus-killed-mark
-Marked as killed (@code{gnus-killed-mark}).
-
-@item X
-@vindex gnus-kill-file-mark
-Marked as killed by kill files (@code{gnus-kill-file-mark}).
-
-@item Y
-@vindex gnus-low-score-mark
-Marked as read by having too low a score (@code{gnus-low-score-mark}).
-
-@item C
-@vindex gnus-catchup-mark
-Marked as read by a catchup (@code{gnus-catchup-mark}).
-
-@item G
-@vindex gnus-canceled-mark
-Canceled article (@code{gnus-canceled-mark})
-
-@item F
-@vindex gnus-souped-mark
-@sc{SOUP}ed article (@code{gnus-souped-mark}). @xref{SOUP}.
-
-@item Q
-@vindex gnus-sparse-mark
-Sparsely reffed article (@code{gnus-sparse-mark}). @xref{Customizing
-Threading}.
-
-@item M
-@vindex gnus-duplicate-mark
-Article marked as read by duplicate suppression
-(@code{gnus-duplicated-mark}). @xref{Duplicate Suppression}.
-
-@end table
-
-All these marks just mean that the article is marked as read, really.
-They are interpreted differently when doing adaptive scoring, though.
-
-One more special mark, though:
-
-@table @samp
-@item E
-@vindex gnus-expirable-mark
-Marked as expirable (@code{gnus-expirable-mark}).
-
-Marking articles as @dfn{expirable} (or have them marked as such
-automatically) doesn't make much sense in normal groups---a user doesn't
-control expiring of news articles, but in mail groups, for instance,
-articles marked as @dfn{expirable} can be deleted by Gnus at
-any time.
-@end table
-
-
-@node Other Marks
-@subsection Other Marks
-@cindex process mark
-@cindex bookmarks
-
-There are some marks that have nothing to do with whether the article is
-read or not.
-
-@itemize @bullet
-
-@item
-You can set a bookmark in the current article. Say you are reading a
-long thesis on cats' urinary tracts, and have to go home for dinner
-before you've finished reading the thesis. You can then set a bookmark
-in the article, and Gnus will jump to this bookmark the next time it
-encounters the article. @xref{Setting Marks}.
-
-@item
-@vindex gnus-replied-mark
-All articles that you have replied to or made a followup to (i.e., have
-answered) will be marked with an @samp{A} in the second column
-(@code{gnus-replied-mark}).
-
-@item
-@vindex gnus-cached-mark
-Articles stored in the article cache will be marked with an @samp{*} in
-the second column (@code{gnus-cached-mark}). @xref{Article Caching}.
-
-@item
-@vindex gnus-saved-mark
-Articles ``saved'' (in some manner or other; not necessarily
-religiously) are marked with an @samp{S} in the second column
-(@code{gnus-saved-mark}).
-
-@item
-@vindex gnus-not-empty-thread-mark
-@vindex gnus-empty-thread-mark
-If the @samp{%e} spec is used, the presence of threads or not will be
-marked with @code{gnus-not-empty-thread-mark} and
-@code{gnus-empty-thread-mark} in the third column, respectively.
-
-@item
-@vindex gnus-process-mark
-Finally we have the @dfn{process mark} (@code{gnus-process-mark}). A
-variety of commands react to the presence of the process mark. For
-instance, @kbd{X u} (@code{gnus-uu-decode-uu}) will uudecode and view
-all articles that have been marked with the process mark. Articles
-marked with the process mark have a @samp{#} in the second column.
-
-@end itemize
-
-You might have noticed that most of these ``non-readedness'' marks
-appear in the second column by default. So if you have a cached, saved,
-replied article that you have process-marked, what will that look like?
-
-Nothing much. The precedence rules go as follows: process -> cache ->
-replied -> saved. So if the article is in the cache and is replied,
-you'll only see the cache mark and not the replied mark.
-
-
-@node Setting Marks
-@subsection Setting Marks
-@cindex setting marks
-
-All the marking commands understand the numeric prefix.
-
-@table @kbd
-@item M c
-@itemx M-u
-@kindex M c (Summary)
-@kindex M-u (Summary)
-@findex gnus-summary-clear-mark-forward
-@cindex mark as unread
-Clear all readedness-marks from the current article
-(@code{gnus-summary-clear-mark-forward}). In other words, mark the
-article as unread.
-
-@item M t
-@itemx !
-@kindex ! (Summary)
-@kindex M t (Summary)
-@findex gnus-summary-tick-article-forward
-Tick the current article (@code{gnus-summary-tick-article-forward}).
-@xref{Article Caching}.
-
-@item M ?
-@itemx ?
-@kindex ? (Summary)
-@kindex M ? (Summary)
-@findex gnus-summary-mark-as-dormant
-Mark the current article as dormant
-(@code{gnus-summary-mark-as-dormant}). @xref{Article Caching}.
-
-@item M d
-@itemx d
-@kindex M d (Summary)
-@kindex d (Summary)
-@findex gnus-summary-mark-as-read-forward
-Mark the current article as read
-(@code{gnus-summary-mark-as-read-forward}).
-
-@item D
-@kindex D (Summary)
-@findex gnus-summary-mark-as-read-backward
-Mark the current article as read and move point to the previous line
-(@code{gnus-summary-mark-as-read-backward}).
-
-@item M k
-@itemx k
-@kindex k (Summary)
-@kindex M k (Summary)
-@findex gnus-summary-kill-same-subject-and-select
-Mark all articles that have the same subject as the current one as read,
-and then select the next unread article
-(@code{gnus-summary-kill-same-subject-and-select}).
-
-@item M K
-@itemx C-k
-@kindex M K (Summary)
-@kindex C-k (Summary)
-@findex gnus-summary-kill-same-subject
-Mark all articles that have the same subject as the current one as read
-(@code{gnus-summary-kill-same-subject}).
-
-@item M C
-@kindex M C (Summary)
-@findex gnus-summary-catchup
-@c @icon{gnus-summary-catchup}
-Mark all unread articles as read (@code{gnus-summary-catchup}).
-
-@item M C-c
-@kindex M C-c (Summary)
-@findex gnus-summary-catchup-all
-Mark all articles in the group as read---even the ticked and dormant
-articles (@code{gnus-summary-catchup-all}).
-
-@item M H
-@kindex M H (Summary)
-@findex gnus-summary-catchup-to-here
-Catchup the current group to point
-(@code{gnus-summary-catchup-to-here}).
-
-@item C-w
-@kindex C-w (Summary)
-@findex gnus-summary-mark-region-as-read
-Mark all articles between point and mark as read
-(@code{gnus-summary-mark-region-as-read}).
-
-@item M V k
-@kindex M V k (Summary)
-@findex gnus-summary-kill-below
-Kill all articles with scores below the default score (or below the
-numeric prefix) (@code{gnus-summary-kill-below}).
-
-@item M e
-@itemx E
-@kindex M e (Summary)
-@kindex E (Summary)
-@findex gnus-summary-mark-as-expirable
-Mark the current article as expirable
-(@code{gnus-summary-mark-as-expirable}).
-
-@item M b
-@kindex M b (Summary)
-@findex gnus-summary-set-bookmark
-Set a bookmark in the current article
-(@code{gnus-summary-set-bookmark}).
-
-@item M B
-@kindex M B (Summary)
-@findex gnus-summary-remove-bookmark
-Remove the bookmark from the current article
-(@code{gnus-summary-remove-bookmark}).
-
-@item M V c
-@kindex M V c (Summary)
-@findex gnus-summary-clear-above
-Clear all marks from articles with scores over the default score (or
-over the numeric prefix) (@code{gnus-summary-clear-above}).
-
-@item M V u
-@kindex M V u (Summary)
-@findex gnus-summary-tick-above
-Tick all articles with scores over the default score (or over the
-numeric prefix) (@code{gnus-summary-tick-above}).
-
-@item M V m
-@kindex M V m (Summary)
-@findex gnus-summary-mark-above
-Prompt for a mark, and mark all articles with scores over the default
-score (or over the numeric prefix) with this mark
-(@code{gnus-summary-clear-above}).
-@end table
-
-@vindex gnus-summary-goto-unread
-The @code{gnus-summary-goto-unread} variable controls what action should
-be taken after setting a mark. If non-@code{nil}, point will move to
-the next/previous unread article. If @code{nil}, point will just move
-one line up or down. As a special case, if this variable is
-@code{never}, all the marking commands as well as other commands (like
-@kbd{SPACE}) will move to the next article, whether it is unread or not.
-The default is @code{t}.
-
-
-@node Setting Process Marks
-@subsection Setting Process Marks
-@cindex setting process marks
-
-@table @kbd
-
-@item M P p
-@itemx #
-@kindex # (Summary)
-@kindex M P p (Summary)
-@findex gnus-summary-mark-as-processable
-Mark the current article with the process mark
-(@code{gnus-summary-mark-as-processable}).
-@findex gnus-summary-unmark-as-processable
-
-@item M P u
-@itemx M-#
-@kindex M P u (Summary)
-@kindex M-# (Summary)
-Remove the process mark, if any, from the current article
-(@code{gnus-summary-unmark-as-processable}).
-
-@item M P U
-@kindex M P U (Summary)
-@findex gnus-summary-unmark-all-processable
-Remove the process mark from all articles
-(@code{gnus-summary-unmark-all-processable}).
-
-@item M P i
-@kindex M P i (Summary)
-@findex gnus-uu-invert-processable
-Invert the list of process marked articles
-(@code{gnus-uu-invert-processable}).
-
-@item M P R
-@kindex M P R (Summary)
-@findex gnus-uu-mark-by-regexp
-Mark articles that have a @code{Subject} header that matches a regular
-expression (@code{gnus-uu-mark-by-regexp}).
-
-@item M P r
-@kindex M P r (Summary)
-@findex gnus-uu-mark-region
-Mark articles in region (@code{gnus-uu-mark-region}).
-
-@item M P t
-@kindex M P t (Summary)
-@findex gnus-uu-mark-thread
-Mark all articles in the current (sub)thread
-(@code{gnus-uu-mark-thread}).
-
-@item M P T
-@kindex M P T (Summary)
-@findex gnus-uu-unmark-thread
-Unmark all articles in the current (sub)thread
-(@code{gnus-uu-unmark-thread}).
-
-@item M P v
-@kindex M P v (Summary)
-@findex gnus-uu-mark-over
-Mark all articles that have a score above the prefix argument
-(@code{gnus-uu-mark-over}).
-
-@item M P s
-@kindex M P s (Summary)
-@findex gnus-uu-mark-series
-Mark all articles in the current series (@code{gnus-uu-mark-series}).
-
-@item M P S
-@kindex M P S (Summary)
-@findex gnus-uu-mark-sparse
-Mark all series that have already had some articles marked
-(@code{gnus-uu-mark-sparse}).
-
-@item M P a
-@kindex M P a (Summary)
-@findex gnus-uu-mark-all
-Mark all articles in series order (@code{gnus-uu-mark-series}).
-
-@item M P b
-@kindex M P b (Summary)
-@findex gnus-uu-mark-buffer
-Mark all articles in the buffer in the order they appear
-(@code{gnus-uu-mark-buffer}).
-
-@item M P k
-@kindex M P k (Summary)
-@findex gnus-summary-kill-process-mark
-Push the current process mark set onto the stack and unmark all articles
-(@code{gnus-summary-kill-process-mark}).
-
-@item M P y
-@kindex M P y (Summary)
-@findex gnus-summary-yank-process-mark
-Pop the previous process mark set from the stack and restore it
-(@code{gnus-summary-yank-process-mark}).
-
-@item M P w
-@kindex M P w (Summary)
-@findex gnus-summary-save-process-mark
-Push the current process mark set onto the stack
-(@code{gnus-summary-save-process-mark}).
-
-@end table
-
-
-@node Limiting
-@section Limiting
-@cindex limiting
-
-It can be convenient to limit the summary buffer to just show some
-subset of the articles currently in the group. The effect most limit
-commands have is to remove a few (or many) articles from the summary
-buffer.
-
-All limiting commands work on subsets of the articles already fetched
-from the servers. None of these commands query the server for
-additional articles.
-
-@table @kbd
-
-@item / /
-@itemx / s
-@kindex / / (Summary)
-@findex gnus-summary-limit-to-subject
-Limit the summary buffer to articles that match some subject
-(@code{gnus-summary-limit-to-subject}).
-
-@item / a
-@kindex / a (Summary)
-@findex gnus-summary-limit-to-author
-Limit the summary buffer to articles that match some author
-(@code{gnus-summary-limit-to-author}).
-
-@item / u
-@itemx x
-@kindex / u (Summary)
-@kindex x (Summary)
-@findex gnus-summary-limit-to-unread
-Limit the summary buffer to articles not marked as read
-(@code{gnus-summary-limit-to-unread}). If given a prefix, limit the
-buffer to articles strictly unread. This means that ticked and
-dormant articles will also be excluded.
-
-@item / m
-@kindex / m (Summary)
-@findex gnus-summary-limit-to-marks
-Ask for a mark and then limit to all articles that have been marked
-with that mark (@code{gnus-summary-limit-to-marks}).
-
-@item / t
-@kindex / t (Summary)
-@findex gnus-summary-limit-to-age
-Ask for a number and then limit the summary buffer to articles older than (or equal to) that number of days
-(@code{gnus-summary-limit-to-marks}). If given a prefix, limit to
-articles younger than that number of days.
-
-@item / n
-@kindex / n (Summary)
-@findex gnus-summary-limit-to-articles
-Limit the summary buffer to the current article
-(@code{gnus-summary-limit-to-articles}). Uses the process/prefix
-convention (@pxref{Process/Prefix}).
-
-@item / w
-@kindex / w (Summary)
-@findex gnus-summary-pop-limit
-Pop the previous limit off the stack and restore it
-(@code{gnus-summary-pop-limit}). If given a prefix, pop all limits off
-the stack.
-
-@item / v
-@kindex / v (Summary)
-@findex gnus-summary-limit-to-score
-Limit the summary buffer to articles that have a score at or above some
-score (@code{gnus-summary-limit-to-score}).
-
-@item / E
-@itemx M S
-@kindex M S (Summary)
-@kindex / E (Summary)
-@findex gnus-summary-limit-include-expunged
-Include all expunged articles in the limit
-(@code{gnus-summary-limit-include-expunged}).
-
-@item / D
-@kindex / D (Summary)
-@findex gnus-summary-limit-include-dormant
-Include all dormant articles in the limit
-(@code{gnus-summary-limit-include-dormant}).
-
-@item / *
-@kindex / * (Summary)
-@findex gnus-summary-limit-include-cached
-Include all cached articles in the limit
-(@code{gnus-summary-limit-include-cached}).
-
-@item / d
-@kindex / d (Summary)
-@findex gnus-summary-limit-exclude-dormant
-Exclude all dormant articles from the limit
-(@code{gnus-summary-limit-exclude-dormant}).
-
-@item / T
-@kindex / T (Summary)
-@findex gnus-summary-limit-include-thread
-Include all the articles in the current thread in the limit.
-
-@item / c
-@kindex / c (Summary)
-@findex gnus-summary-limit-exclude-childless-dormant
-Exclude all dormant articles that have no children from the limit
-(@code{gnus-summary-limit-exclude-childless-dormant}).
-
-@item / C
-@kindex / C (Summary)
-@findex gnus-summary-limit-mark-excluded-as-read
-Mark all excluded unread articles as read
-(@code{gnus-summary-limit-mark-excluded-as-read}). If given a prefix,
-also mark excluded ticked and dormant articles as read.
-
-@end table
-
-
-@node Threading
-@section Threading
-@cindex threading
-@cindex article threading
-
-Gnus threads articles by default. @dfn{To thread} is to put responses
-to articles directly after the articles they respond to---in a
-hierarchical fashion.
-
-Threading is done by looking at the @code{References} headers of the
-articles. In a perfect world, this would be enough to build pretty
-trees, but unfortunately, the @code{References} header is often broken
-or simply missing. Weird news propagation excarcerbates the problem,
-so one has to employ other heuristics to get pleasing results. A
-plethora of approaches exists, as detailed in horrible detail in
-@pxref{Customizing Threading}.
-
-First, a quick overview of the concepts:
-
-@table @dfn
-@item root
-The top-most article in a thread; the first article in the thread.
-
-@item thread
-A tree-like article structure.
-
-@item sub-thread
-A small(er) section of this tree-like structure.
-
-@item loose threads
-Threads often lose their roots due to article expiry, or due to the root
-already having been read in a previous session, and not displayed in the
-summary buffer. We then typically have many sub-threads that really
-belong to one thread, but are without connecting roots. These are
-called loose threads.
-
-@item thread gathering
-An attempt to gather loose threads into bigger threads.
-
-@item sparse threads
-A thread where the missing articles have been ``guessed'' at, and are
-displayed as empty lines in the summary buffer.
-
-@end table
-
-
-@menu
-* Customizing Threading:: Variables you can change to affect the threading.
-* Thread Commands:: Thread based commands in the summary buffer.
-@end menu
-
-
-@node Customizing Threading
-@subsection Customizing Threading
-@cindex customizing threading
-
-@menu
-* Loose Threads:: How Gnus gathers loose threads into bigger threads.
-* Filling In Threads:: Making the threads displayed look fuller.
-* More Threading:: Even more variables for fiddling with threads.
-* Low-Level Threading:: You thought it was over... but you were wrong!
-@end menu
-
-
-@node Loose Threads
-@subsubsection Loose Threads
-@cindex <
-@cindex >
-@cindex loose threads
-
-@table @code
-@item gnus-summary-make-false-root
-@vindex gnus-summary-make-false-root
-If non-@code{nil}, Gnus will gather all loose subtrees into one big tree
-and create a dummy root at the top. (Wait a minute. Root at the top?
-Yup.) Loose subtrees occur when the real root has expired, or you've
-read or killed the root in a previous session.
-
-When there is no real root of a thread, Gnus will have to fudge
-something. This variable says what fudging method Gnus should use.
-There are four possible values:
-
-@iftex
-@iflatex
-\gnusfigure{The Summary Buffer}{390}{
-\put(0,0){\epsfig{figure=tmp/summary-adopt.ps,width=7.5cm}}
-\put(445,0){\makebox(0,0)[br]{\epsfig{figure=tmp/summary-empty.ps,width=7.5cm}}}
-\put(0,400){\makebox(0,0)[tl]{\epsfig{figure=tmp/summary-none.ps,width=7.5cm}}}
-\put(445,400){\makebox(0,0)[tr]{\epsfig{figure=tmp/summary-dummy.ps,width=7.5cm}}}
-}
-@end iflatex
-@end iftex
-
-@cindex adopting articles
-
-@table @code
-
-@item adopt
-Gnus will make the first of the orphaned articles the parent. This
-parent will adopt all the other articles. The adopted articles will be
-marked as such by pointy brackets (@samp{<>}) instead of the standard
-square brackets (@samp{[]}). This is the default method.
-
-@item dummy
-@vindex gnus-summary-dummy-line-format
-Gnus will create a dummy summary line that will pretend to be the
-parent. This dummy line does not correspond to any real article, so
-selecting it will just select the first real article after the dummy
-article. @code{gnus-summary-dummy-line-format} is used to specify the
-format of the dummy roots. It accepts only one format spec: @samp{S},
-which is the subject of the article. @xref{Formatting Variables}.
-
-@item empty
-Gnus won't actually make any article the parent, but simply leave the
-subject field of all orphans except the first empty. (Actually, it will
-use @code{gnus-summary-same-subject} as the subject (@pxref{Summary
-Buffer Format}).)
-
-@item none
-Don't make any article parent at all. Just gather the threads and
-display them after one another.
-
-@item nil
-Don't gather loose threads.
-@end table
-
-@item gnus-summary-gather-subject-limit
-@vindex gnus-summary-gather-subject-limit
-Loose threads are gathered by comparing subjects of articles. If this
-variable is @code{nil}, Gnus requires an exact match between the
-subjects of the loose threads before gathering them into one big
-super-thread. This might be too strict a requirement, what with the
-presence of stupid newsreaders that chop off long subject lines. If
-you think so, set this variable to, say, 20 to require that only the
-first 20 characters of the subjects have to match. If you set this
-variable to a really low number, you'll find that Gnus will gather
-everything in sight into one thread, which isn't very helpful.
-
-@cindex fuzzy article gathering
-If you set this variable to the special value @code{fuzzy}, Gnus will
-use a fuzzy string comparison algorithm on the subjects (@pxref{Fuzzy
-Matching}).
-
-@item gnus-simplify-subject-fuzzy-regexp
-@vindex gnus-simplify-subject-fuzzy-regexp
-This can either be a regular expression or list of regular expressions
-that match strings that will be removed from subjects if fuzzy subject
-simplification is used.
-
-@item gnus-simplify-ignored-prefixes
-@vindex gnus-simplify-ignored-prefixes
-If you set @code{gnus-summary-gather-subject-limit} to something as low
-as 10, you might consider setting this variable to something sensible:
-
-@c Written by Michael Ernst <mernst@cs.rice.edu>
-@lisp
-(setq gnus-simplify-ignored-prefixes
- (concat
- "\\`\\[?\\("
- (mapconcat
- 'identity
- '("looking"
- "wanted" "followup" "summary\\( of\\)?"
- "help" "query" "problem" "question"
- "answer" "reference" "announce"
- "How can I" "How to" "Comparison of"
- ;; ...
- )
- "\\|")
- "\\)\\s *\\("
- (mapconcat 'identity
- '("for" "for reference" "with" "about")
- "\\|")
- "\\)?\\]?:?[ \t]*"))
-@end lisp
-
-All words that match this regexp will be removed before comparing two
-subjects.
-
-@item gnus-simplify-subject-functions
-@vindex gnus-simplify-subject-functions
-If non-@code{nil}, this variable overrides
-@code{gnus-summary-gather-subject-limit}. This variable should be a
-list of functions to apply to the @code{Subject} string iteratively to
-arrive at the simplified version of the string.
-
-Useful functions to put in this list include:
-
-@table @code
-@item gnus-simplify-subject-re
-@findex gnus-simplify-subject-re
-Strip the leading @samp{Re:}.
-
-@item gnus-simplify-subject-fuzzy
-@findex gnus-simplify-subject-fuzzy
-Simplify fuzzily.
-
-@item gnus-simplify-whitespace
-@findex gnus-simplify-whitespace
-Remove excessive whitespace.
-@end table
-
-You may also write your own functions, of course.
-
-
-@item gnus-summary-gather-exclude-subject
-@vindex gnus-summary-gather-exclude-subject
-Since loose thread gathering is done on subjects only, that might lead
-to many false hits, especially with certain common subjects like
-@samp{} and @samp{(none)}. To make the situation slightly better,
-you can use the regexp @code{gnus-summary-gather-exclude-subject} to say
-what subjects should be excluded from the gathering process.@*
-The default is @samp{^ *$\\|^(none)$}.
-
-@item gnus-summary-thread-gathering-function
-@vindex gnus-summary-thread-gathering-function
-Gnus gathers threads by looking at @code{Subject} headers. This means
-that totally unrelated articles may end up in the same ``thread'', which
-is confusing. An alternate approach is to look at all the
-@code{Message-ID}s in all the @code{References} headers to find matches.
-This will ensure that no gathered threads ever include unrelated
-articles, but it also means that people who have posted with broken
-newsreaders won't be gathered properly. The choice is yours---plague or
-cholera:
-
-@table @code
-@item gnus-gather-threads-by-subject
-@findex gnus-gather-threads-by-subject
-This function is the default gathering function and looks at
-@code{Subject}s exclusively.
-
-@item gnus-gather-threads-by-references
-@findex gnus-gather-threads-by-references
-This function looks at @code{References} headers exclusively.
-@end table
-
-If you want to test gathering by @code{References}, you could say
-something like:
-
-@lisp
-(setq gnus-summary-thread-gathering-function
- 'gnus-gather-threads-by-references)
-@end lisp
-
-@end table
-
-
-@node Filling In Threads
-@subsubsection Filling In Threads
-
-@table @code
-@item gnus-fetch-old-headers
-@vindex gnus-fetch-old-headers
-If non-@code{nil}, Gnus will attempt to build old threads by fetching
-more old headers---headers to articles marked as read. If you
-would like to display as few summary lines as possible, but still
-connect as many loose threads as possible, you should set this variable
-to @code{some} or a number. If you set it to a number, no more than
-that number of extra old headers will be fetched. In either case,
-fetching old headers only works if the backend you are using carries
-overview files---this would normally be @code{nntp}, @code{nnspool} and
-@code{nnml}. Also remember that if the root of the thread has been
-expired by the server, there's not much Gnus can do about that.
-
-This variable can also be set to @code{invisible}. This won't have any
-visible effects, but is useful if you use the @kbd{A T} command a lot
-(@pxref{Finding the Parent}).
-
-@item gnus-build-sparse-threads
-@vindex gnus-build-sparse-threads
-Fetching old headers can be slow. A low-rent similar effect can be
-gotten by setting this variable to @code{some}. Gnus will then look at
-the complete @code{References} headers of all articles and try to string
-together articles that belong in the same thread. This will leave
-@dfn{gaps} in the threading display where Gnus guesses that an article
-is missing from the thread. (These gaps appear like normal summary
-lines. If you select a gap, Gnus will try to fetch the article in
-question.) If this variable is @code{t}, Gnus will display all these
-``gaps'' without regard for whether they are useful for completing the
-thread or not. Finally, if this variable is @code{more}, Gnus won't cut
-off sparse leaf nodes that don't lead anywhere. This variable is
-@code{nil} by default.
-
-@end table
-
-
-@node More Threading
-@subsubsection More Threading
-
-@table @code
-@item gnus-show-threads
-@vindex gnus-show-threads
-If this variable is @code{nil}, no threading will be done, and all of
-the rest of the variables here will have no effect. Turning threading
-off will speed group selection up a bit, but it is sure to make reading
-slower and more awkward.
-
-@item gnus-thread-hide-subtree
-@vindex gnus-thread-hide-subtree
-If non-@code{nil}, all threads will be hidden when the summary buffer is
-generated.
-
-@item gnus-thread-expunge-below
-@vindex gnus-thread-expunge-below
-All threads that have a total score (as defined by
-@code{gnus-thread-score-function}) less than this number will be
-expunged. This variable is @code{nil} by default, which means that no
-threads are expunged.
-
-@item gnus-thread-hide-killed
-@vindex gnus-thread-hide-killed
-if you kill a thread and this variable is non-@code{nil}, the subtree
-will be hidden.
-
-@item gnus-thread-ignore-subject
-@vindex gnus-thread-ignore-subject
-Sometimes somebody changes the subject in the middle of a thread. If
-this variable is non-@code{nil}, the subject change is ignored. If it
-is @code{nil}, which is the default, a change in the subject will result
-in a new thread.
-
-@item gnus-thread-indent-level
-@vindex gnus-thread-indent-level
-This is a number that says how much each sub-thread should be indented.
-The default is 4.
-
-@end table
-
-
-@node Low-Level Threading
-@subsubsection Low-Level Threading
-
-@table @code
-
-@item gnus-parse-headers-hook
-@vindex gnus-parse-headers-hook
-Hook run before parsing any headers.
-
-@item gnus-alter-header-function
-@vindex gnus-alter-header-function
-If non-@code{nil}, this function will be called to allow alteration of
-article header structures. The function is called with one parameter,
-the article header vector, which it may alter in any way. For instance,
-if you have a mail-to-news gateway which alters the @code{Message-ID}s
-in systematic ways (by adding prefixes and such), you can use this
-variable to un-scramble the @code{Message-ID}s so that they are more
-meaningful. Here's one example:
-
-@lisp
-(setq gnus-alter-header-function 'my-alter-message-id)
-
-(defun my-alter-message-id (header)
- (let ((id (mail-header-id header)))
- (when (string-match
- "\\(<[^<>@@]*\\)\\.?cygnus\\..*@@\\([^<>@@]*>\\)" id)
- (mail-header-set-id
- (concat (match-string 1 id) "@@" (match-string 2 id))
- header))))
-@end lisp
-
-@end table
-
-
-@node Thread Commands
-@subsection Thread Commands
-@cindex thread commands
-
-@table @kbd
-
-@item T k
-@itemx M-C-k
-@kindex T k (Summary)
-@kindex M-C-k (Summary)
-@findex gnus-summary-kill-thread
-Mark all articles in the current (sub-)thread as read
-(@code{gnus-summary-kill-thread}). If the prefix argument is positive,
-remove all marks instead. If the prefix argument is negative, tick
-articles instead.
-
-@item T l
-@itemx M-C-l
-@kindex T l (Summary)
-@kindex M-C-l (Summary)
-@findex gnus-summary-lower-thread
-Lower the score of the current (sub-)thread
-(@code{gnus-summary-lower-thread}).
-
-@item T i
-@kindex T i (Summary)
-@findex gnus-summary-raise-thread
-Increase the score of the current (sub-)thread
-(@code{gnus-summary-raise-thread}).
-
-@item T #
-@kindex T # (Summary)
-@findex gnus-uu-mark-thread
-Set the process mark on the current (sub-)thread
-(@code{gnus-uu-mark-thread}).
-
-@item T M-#
-@kindex T M-# (Summary)
-@findex gnus-uu-unmark-thread
-Remove the process mark from the current (sub-)thread
-(@code{gnus-uu-unmark-thread}).
-
-@item T T
-@kindex T T (Summary)
-@findex gnus-summary-toggle-threads
-Toggle threading (@code{gnus-summary-toggle-threads}).
-
-@item T s
-@kindex T s (Summary)
-@findex gnus-summary-show-thread
-Expose the (sub-)thread hidden under the current article, if any
-(@code{gnus-summary-show-thread}).
-
-@item T h
-@kindex T h (Summary)
-@findex gnus-summary-hide-thread
-Hide the current (sub-)thread (@code{gnus-summary-hide-thread}).
-
-@item T S
-@kindex T S (Summary)
-@findex gnus-summary-show-all-threads
-Expose all hidden threads (@code{gnus-summary-show-all-threads}).
-
-@item T H
-@kindex T H (Summary)
-@findex gnus-summary-hide-all-threads
-Hide all threads (@code{gnus-summary-hide-all-threads}).
-
-@item T t
-@kindex T t (Summary)
-@findex gnus-summary-rethread-current
-Re-thread the current article's thread
-(@code{gnus-summary-rethread-current}). This works even when the
-summary buffer is otherwise unthreaded.
-
-@item T ^
-@kindex T ^ (Summary)
-@findex gnus-summary-reparent-thread
-Make the current article the child of the marked (or previous) article
-(@code{gnus-summary-reparent-thread}).
-
-@end table
-
-The following commands are thread movement commands. They all
-understand the numeric prefix.
-
-@table @kbd
-
-@item T n
-@kindex T n (Summary)
-@findex gnus-summary-next-thread
-Go to the next thread (@code{gnus-summary-next-thread}).
-
-@item T p
-@kindex T p (Summary)
-@findex gnus-summary-prev-thread
-Go to the previous thread (@code{gnus-summary-prev-thread}).
-
-@item T d
-@kindex T d (Summary)
-@findex gnus-summary-down-thread
-Descend the thread (@code{gnus-summary-down-thread}).
-
-@item T u
-@kindex T u (Summary)
-@findex gnus-summary-up-thread
-Ascend the thread (@code{gnus-summary-up-thread}).
-
-@item T o
-@kindex T o (Summary)
-@findex gnus-summary-top-thread
-Go to the top of the thread (@code{gnus-summary-top-thread}).
-@end table
-
-@vindex gnus-thread-operation-ignore-subject
-If you ignore subject while threading, you'll naturally end up with
-threads that have several different subjects in them. If you then issue
-a command like `T k' (@code{gnus-summary-kill-thread}) you might not
-wish to kill the entire thread, but just those parts of the thread that
-have the same subject as the current article. If you like this idea,
-you can fiddle with @code{gnus-thread-operation-ignore-subject}. If it
-is non-@code{nil} (which it is by default), subjects will be ignored
-when doing thread commands. If this variable is @code{nil}, articles in
-the same thread with different subjects will not be included in the
-operation in question. If this variable is @code{fuzzy}, only articles
-that have subjects fuzzily equal will be included (@pxref{Fuzzy
-Matching}).
-
-
-@node Sorting
-@section Sorting
-
-@findex gnus-thread-sort-by-total-score
-@findex gnus-thread-sort-by-date
-@findex gnus-thread-sort-by-score
-@findex gnus-thread-sort-by-subject
-@findex gnus-thread-sort-by-author
-@findex gnus-thread-sort-by-number
-@vindex gnus-thread-sort-functions
-If you are using a threaded summary display, you can sort the threads by
-setting @code{gnus-thread-sort-functions}, which can be either a single
-function, a list of functions, or a list containing functions and
-@code{(not some-function)} elements.
-
-By default, sorting is done on article numbers. Ready-made sorting
-predicate functions include @code{gnus-thread-sort-by-number},
-@code{gnus-thread-sort-by-author}, @code{gnus-thread-sort-by-subject},
-@code{gnus-thread-sort-by-date}, @code{gnus-thread-sort-by-score}, and
-@code{gnus-thread-sort-by-total-score}.
-
-Each function takes two threads and returns non-@code{nil} if the first
-thread should be sorted before the other. Note that sorting really is
-normally done by looking only at the roots of each thread.
-
-If you use more than one function, the primary sort key should be the
-last function in the list. You should probably always include
-@code{gnus-thread-sort-by-number} in the list of sorting
-functions---preferably first. This will ensure that threads that are
-equal with respect to the other sort criteria will be displayed in
-ascending article order.
-
-If you would like to sort by reverse score, then by subject, and finally
-by number, you could do something like:
-
-@lisp
-(setq gnus-thread-sort-functions
- '(gnus-thread-sort-by-number
- gnus-thread-sort-by-subject
- (reverse gnus-thread-sort-by-total-score)))
-@end lisp
-
-The threads that have highest score will be displayed first in the
-summary buffer. When threads have the same score, they will be sorted
-alphabetically. The threads that have the same score and the same
-subject will be sorted by number, which is (normally) the sequence in
-which the articles arrived.
-
-If you want to sort by score and then reverse arrival order, you could
-say something like:
-
-@lisp
-(setq gnus-thread-sort-functions
- '((lambda (t1 t2)
- (not (gnus-thread-sort-by-number t1 t2)))
- gnus-thread-sort-by-score))
-@end lisp
-
-@vindex gnus-thread-score-function
-The function in the @code{gnus-thread-score-function} variable (default
-@code{+}) is used for calculating the total score of a thread. Useful
-functions might be @code{max}, @code{min}, or squared means, or whatever
-tickles your fancy.
-
-@findex gnus-article-sort-functions
-@findex gnus-article-sort-by-date
-@findex gnus-article-sort-by-score
-@findex gnus-article-sort-by-subject
-@findex gnus-article-sort-by-author
-@findex gnus-article-sort-by-number
-If you are using an unthreaded display for some strange reason or other,
-you have to fiddle with the @code{gnus-article-sort-functions} variable.
-It is very similar to the @code{gnus-thread-sort-functions}, except that
-it uses slightly different functions for article comparison. Available
-sorting predicate functions are @code{gnus-article-sort-by-number},
-@code{gnus-article-sort-by-author}, @code{gnus-article-sort-by-subject},
-@code{gnus-article-sort-by-date}, and @code{gnus-article-sort-by-score}.
-
-If you want to sort an unthreaded summary display by subject, you could
-say something like:
-
-@lisp
-(setq gnus-article-sort-functions
- '(gnus-article-sort-by-number
- gnus-article-sort-by-subject))
-@end lisp
-
-
-
-@node Asynchronous Fetching
-@section Asynchronous Article Fetching
-@cindex asynchronous article fetching
-@cindex article pre-fetch
-@cindex pre-fetch
-
-If you read your news from an @sc{nntp} server that's far away, the
-network latencies may make reading articles a chore. You have to wait
-for a while after pressing @kbd{n} to go to the next article before the
-article appears. Why can't Gnus just go ahead and fetch the article
-while you are reading the previous one? Why not, indeed.
-
-First, some caveats. There are some pitfalls to using asynchronous
-article fetching, especially the way Gnus does it.
-
-Let's say you are reading article 1, which is short, and article 2 is
-quite long, and you are not interested in reading that. Gnus does not
-know this, so it goes ahead and fetches article 2. You decide to read
-article 3, but since Gnus is in the process of fetching article 2, the
-connection is blocked.
-
-To avoid these situations, Gnus will open two (count 'em two)
-connections to the server. Some people may think this isn't a very nice
-thing to do, but I don't see any real alternatives. Setting up that
-extra connection takes some time, so Gnus startup will be slower.
-
-Gnus will fetch more articles than you will read. This will mean that
-the link between your machine and the @sc{nntp} server will become more
-loaded than if you didn't use article pre-fetch. The server itself will
-also become more loaded---both with the extra article requests, and the
-extra connection.
-
-Ok, so now you know that you shouldn't really use this thing... unless
-you really want to.
-
-@vindex gnus-asynchronous
-Here's how: Set @code{gnus-asynchronous} to @code{t}. The rest should
-happen automatically.
-
-@vindex gnus-use-article-prefetch
-You can control how many articles are to be pre-fetched by setting
-@code{gnus-use-article-prefetch}. This is 30 by default, which means
-that when you read an article in the group, the backend will pre-fetch
-the next 30 articles. If this variable is @code{t}, the backend will
-pre-fetch all the articles it can without bound. If it is
-@code{nil}, no pre-fetching will be done.
-
-@vindex gnus-async-prefetch-article-p
-@findex gnus-async-read-p
-There are probably some articles that you don't want to pre-fetch---read
-articles, for instance. The @code{gnus-async-prefetch-article-p} variable controls whether an article is to be pre-fetched. This function should
-return non-@code{nil} when the article in question is to be
-pre-fetched. The default is @code{gnus-async-read-p}, which returns
-@code{nil} on read articles. The function is called with an article
-data structure as the only parameter.
-
-If, for instance, you wish to pre-fetch only unread articles shorter than 100 lines, you could say something like:
-
-@lisp
-(defun my-async-short-unread-p (data)
- "Return non-nil for short, unread articles."
- (and (gnus-data-unread-p data)
- (< (mail-header-lines (gnus-data-header data))
- 100)))
-
-(setq gnus-async-prefetch-article-p 'my-async-short-unread-p)
-@end lisp
-
-These functions will be called many, many times, so they should
-preferably be short and sweet to avoid slowing down Gnus too much.
-It's probably a good idea to byte-compile things like this.
-
-@vindex gnus-prefetched-article-deletion-strategy
-Articles have to be removed from the asynch buffer sooner or later. The
-@code{gnus-prefetched-article-deletion-strategy} says when to remove
-articles. This is a list that may contain the following elements:
-
-@table @code
-@item read
-Remove articles when they are read.
-
-@item exit
-Remove articles when exiting the group.
-@end table
-
-The default value is @code{(read exit)}.
-
-@c @vindex gnus-use-header-prefetch
-@c If @code{gnus-use-header-prefetch} is non-@code{nil}, prefetch articles
-@c from the next group.
-
-
-@node Article Caching
-@section Article Caching
-@cindex article caching
-@cindex caching
-
-If you have an @emph{extremely} slow @sc{nntp} connection, you may
-consider turning article caching on. Each article will then be stored
-locally under your home directory. As you may surmise, this could
-potentially use @emph{huge} amounts of disk space, as well as eat up all
-your inodes so fast it will make your head swim. In vodka.
-
-Used carefully, though, it could be just an easier way to save articles.
-
-@vindex gnus-use-long-file-name
-@vindex gnus-cache-directory
-@vindex gnus-use-cache
-To turn caching on, set @code{gnus-use-cache} to @code{t}. By default,
-all articles ticked or marked as dormant will then be copied
-over to your local cache (@code{gnus-cache-directory}). Whether this
-cache is flat or hierarchal is controlled by the
-@code{gnus-use-long-file-name} variable, as usual.
-
-When re-selecting a ticked or dormant article, it will be fetched from the
-cache instead of from the server. As articles in your cache will never
-expire, this might serve as a method of saving articles while still
-keeping them where they belong. Just mark all articles you want to save
-as dormant, and don't worry.
-
-When an article is marked as read, is it removed from the cache.
-
-@vindex gnus-cache-remove-articles
-@vindex gnus-cache-enter-articles
-The entering/removal of articles from the cache is controlled by the
-@code{gnus-cache-enter-articles} and @code{gnus-cache-remove-articles}
-variables. Both are lists of symbols. The first is @code{(ticked
-dormant)} by default, meaning that ticked and dormant articles will be
-put in the cache. The latter is @code{(read)} by default, meaning that
-articles marked as read are removed from the cache. Possibly
-symbols in these two lists are @code{ticked}, @code{dormant},
-@code{unread} and @code{read}.
-
-@findex gnus-jog-cache
-So where does the massive article-fetching and storing come into the
-picture? The @code{gnus-jog-cache} command will go through all
-subscribed newsgroups, request all unread articles, score them, and
-store them in the cache. You should only ever, ever ever ever, use this
-command if 1) your connection to the @sc{nntp} server is really, really,
-really slow and 2) you have a really, really, really huge disk.
-Seriously. One way to cut down on the number of articles downloaded is
-to score unwanted articles down and have them marked as read. They will
-not then be downloaded by this command.
-
-@vindex gnus-uncacheable-groups
-@vindex gnus-cacheable-groups
-It is likely that you do not want caching on all groups. For instance,
-if your @code{nnml} mail is located under your home directory, it makes no
-sense to cache it somewhere else under your home directory. Unless you
-feel that it's neat to use twice as much space.
-
-To limit the caching, you could set @code{gnus-cacheable-groups} to a
-regexp of groups to cache, @samp{^nntp} for instance, or set the
-@code{gnus-uncacheable-groups} regexp to @samp{^nnml}, for instance.
-Both variables are @code{nil} by default. If a group matches both
-variables, the group is not cached.
-
-@findex gnus-cache-generate-nov-databases
-@findex gnus-cache-generate-active
-@vindex gnus-cache-active-file
-The cache stores information on what articles it contains in its active
-file (@code{gnus-cache-active-file}). If this file (or any other parts
-of the cache) becomes all messed up for some reason or other, Gnus
-offers two functions that will try to set things right. @kbd{M-x
-gnus-cache-generate-nov-databases} will (re)build all the @sc{nov}
-files, and @kbd{gnus-cache-generate-active} will (re)generate the active
-file.
-
-
-@node Persistent Articles
-@section Persistent Articles
-@cindex persistent articles
-
-Closely related to article caching, we have @dfn{persistent articles}.
-In fact, it's just a different way of looking at caching, and much more
-useful in my opinion.
-
-Say you're reading a newsgroup, and you happen on to some valuable gem
-that you want to keep and treasure forever. You'd normally just save it
-(using one of the many saving commands) in some file. The problem with
-that is that it's just, well, yucky. Ideally you'd prefer just having
-the article remain in the group where you found it forever; untouched by
-the expiry going on at the news server.
-
-This is what a @dfn{persistent article} is---an article that just won't
-be deleted. It's implemented using the normal cache functions, but
-you use two explicit commands for managing persistent articles:
-
-@table @kbd
-
-@item *
-@kindex * (Summary)
-@findex gnus-cache-enter-article
-Make the current article persistent (@code{gnus-cache-enter-article}).
-
-@item M-*
-@kindex M-* (Summary)
-@findex gnus-cache-remove-article
-Remove the current article from the persistent articles
-(@code{gnus-cache-remove-article}). This will normally delete the
-article.
-@end table
-
-Both these commands understand the process/prefix convention.
-
-To avoid having all ticked articles (and stuff) entered into the cache,
-you should set @code{gnus-use-cache} to @code{passive} if you're just
-interested in persistent articles:
-
-@lisp
-(setq gnus-use-cache 'passive)
-@end lisp
-
-
-@node Article Backlog
-@section Article Backlog
-@cindex backlog
-@cindex article backlog
-
-If you have a slow connection, but the idea of using caching seems
-unappealing to you (and it is, really), you can help the situation some
-by switching on the @dfn{backlog}. This is where Gnus will buffer
-already read articles so that it doesn't have to re-fetch articles
-you've already read. This only helps if you are in the habit of
-re-selecting articles you've recently read, of course. If you never do
-that, turning the backlog on will slow Gnus down a little bit, and
-increase memory usage some.
-
-@vindex gnus-keep-backlog
-If you set @code{gnus-keep-backlog} to a number @var{n}, Gnus will store
-at most @var{n} old articles in a buffer for later re-fetching. If this
-variable is non-@code{nil} and is not a number, Gnus will store
-@emph{all} read articles, which means that your Emacs will grow without
-bound before exploding and taking your machine down with you. I put
-that in there just to keep y'all on your toes.
-
-This variable is @code{nil} by default.
-
-
-@node Saving Articles
-@section Saving Articles
-@cindex saving articles
-
-Gnus can save articles in a number of ways. Below is the documentation
-for saving articles in a fairly straight-forward fashion (i.e., little
-processing of the article is done before it is saved). For a different
-approach (uudecoding, unsharing) you should use @code{gnus-uu}
-(@pxref{Decoding Articles}).
-
-@vindex gnus-save-all-headers
-If @code{gnus-save-all-headers} is non-@code{nil}, Gnus will not delete
-unwanted headers before saving the article.
-
-@vindex gnus-saved-headers
-If the preceding variable is @code{nil}, all headers that match the
-@code{gnus-saved-headers} regexp will be kept, while the rest will be
-deleted before saving.
-
-@table @kbd
-
-@item O o
-@itemx o
-@kindex O o (Summary)
-@kindex o (Summary)
-@findex gnus-summary-save-article
-@c @icon{gnus-summary-save-article}
-Save the current article using the default article saver
-(@code{gnus-summary-save-article}).
-
-@item O m
-@kindex O m (Summary)
-@findex gnus-summary-save-article-mail
-Save the current article in mail format
-(@code{gnus-summary-save-article-mail}).
-
-@item O r
-@kindex O r (Summary)
-@findex gnus-summary-save-article-rmail
-Save the current article in rmail format
-(@code{gnus-summary-save-article-rmail}).
-
-@item O f
-@kindex O f (Summary)
-@findex gnus-summary-save-article-file
-@c @icon{gnus-summary-save-article-file}
-Save the current article in plain file format
-(@code{gnus-summary-save-article-file}).
-
-@item O F
-@kindex O F (Summary)
-@findex gnus-summary-write-article-file
-Write the current article in plain file format, overwriting any previous
-file contents (@code{gnus-summary-write-article-file}).
-
-@item O b
-@kindex O b (Summary)
-@findex gnus-summary-save-article-body-file
-Save the current article body in plain file format
-(@code{gnus-summary-save-article-body-file}).
-
-@item O h
-@kindex O h (Summary)
-@findex gnus-summary-save-article-folder
-Save the current article in mh folder format
-(@code{gnus-summary-save-article-folder}).
-
-@item O v
-@kindex O v (Summary)
-@findex gnus-summary-save-article-vm
-Save the current article in a VM folder
-(@code{gnus-summary-save-article-vm}).
-
-@item O p
-@kindex O p (Summary)
-@findex gnus-summary-pipe-output
-Save the current article in a pipe. Uhm, like, what I mean is---Pipe
-the current article to a process (@code{gnus-summary-pipe-output}).
-@end table
-
-@vindex gnus-prompt-before-saving
-All these commands use the process/prefix convention
-(@pxref{Process/Prefix}). If you save bunches of articles using these
-functions, you might get tired of being prompted for files to save each
-and every article in. The prompting action is controlled by
-the @code{gnus-prompt-before-saving} variable, which is @code{always} by
-default, giving you that excessive prompting action you know and
-loathe. If you set this variable to @code{t} instead, you'll be prompted
-just once for each series of articles you save. If you like to really
-have Gnus do all your thinking for you, you can even set this variable
-to @code{nil}, which means that you will never be prompted for files to
-save articles in. Gnus will simply save all the articles in the default
-files.
-
-
-@vindex gnus-default-article-saver
-You can customize the @code{gnus-default-article-saver} variable to make
-Gnus do what you want it to. You can use any of the six ready-made
-functions below, or you can create your own.
-
-@table @code
-
-@item gnus-summary-save-in-rmail
-@findex gnus-summary-save-in-rmail
-@vindex gnus-rmail-save-name
-@findex gnus-plain-save-name
-This is the default format, @dfn{babyl}. Uses the function in the
-@code{gnus-rmail-save-name} variable to get a file name to save the
-article in. The default is @code{gnus-plain-save-name}.
-
-@item gnus-summary-save-in-mail
-@findex gnus-summary-save-in-mail
-@vindex gnus-mail-save-name
-Save in a Unix mail (mbox) file. Uses the function in the
-@code{gnus-mail-save-name} variable to get a file name to save the
-article in. The default is @code{gnus-plain-save-name}.
-
-@item gnus-summary-save-in-file
-@findex gnus-summary-save-in-file
-@vindex gnus-file-save-name
-@findex gnus-numeric-save-name
-Append the article straight to an ordinary file. Uses the function in
-the @code{gnus-file-save-name} variable to get a file name to save the
-article in. The default is @code{gnus-numeric-save-name}.
-
-@item gnus-summary-save-body-in-file
-@findex gnus-summary-save-body-in-file
-Append the article body to an ordinary file. Uses the function in the
-@code{gnus-file-save-name} variable to get a file name to save the
-article in. The default is @code{gnus-numeric-save-name}.
-
-@item gnus-summary-save-in-folder
-@findex gnus-summary-save-in-folder
-@findex gnus-folder-save-name
-@findex gnus-Folder-save-name
-@vindex gnus-folder-save-name
-@cindex rcvstore
-@cindex MH folders
-Save the article to an MH folder using @code{rcvstore} from the MH
-library. Uses the function in the @code{gnus-folder-save-name} variable
-to get a file name to save the article in. The default is
-@code{gnus-folder-save-name}, but you can also use
-@code{gnus-Folder-save-name}, which creates capitalized names.
-
-@item gnus-summary-save-in-vm
-@findex gnus-summary-save-in-vm
-Save the article in a VM folder. You have to have the VM mail
-reader to use this setting.
-@end table
-
-@vindex gnus-article-save-directory
-All of these functions, except for the last one, will save the article
-in the @code{gnus-article-save-directory}, which is initialized from the
-@code{SAVEDIR} environment variable. This is @file{~/News/} by
-default.
-
-As you can see above, the functions use different functions to find a
-suitable name of a file to save the article in. Below is a list of
-available functions that generate names:
-
-@table @code
-
-@item gnus-Numeric-save-name
-@findex gnus-Numeric-save-name
-File names like @file{~/News/Alt.andrea-dworkin/45}.
-
-@item gnus-numeric-save-name
-@findex gnus-numeric-save-name
-File names like @file{~/News/alt.andrea-dworkin/45}.
-
-@item gnus-Plain-save-name
-@findex gnus-Plain-save-name
-File names like @file{~/News/Alt.andrea-dworkin}.
-
-@item gnus-plain-save-name
-@findex gnus-plain-save-name
-File names like @file{~/News/alt.andrea-dworkin}.
-@end table
-
-@vindex gnus-split-methods
-You can have Gnus suggest where to save articles by plonking a regexp into
-the @code{gnus-split-methods} alist. For instance, if you would like to
-save articles related to Gnus in the file @file{gnus-stuff}, and articles
-related to VM in @code{vm-stuff}, you could set this variable to something
-like:
-
-@lisp
-(("^Subject:.*gnus\\|^Newsgroups:.*gnus" "gnus-stuff")
- ("^Subject:.*vm\\|^Xref:.*vm" "vm-stuff")
- (my-choosing-function "../other-dir/my-stuff")
- ((equal gnus-newsgroup-name "mail.misc") "mail-stuff"))
-@end lisp
-
-We see that this is a list where each element is a list that has two
-elements---the @dfn{match} and the @dfn{file}. The match can either be
-a string (in which case it is used as a regexp to match on the article
-head); it can be a symbol (which will be called as a function with the
-group name as a parameter); or it can be a list (which will be
-@code{eval}ed). If any of these actions have a non-@code{nil} result,
-the @dfn{file} will be used as a default prompt. In addition, the
-result of the operation itself will be used if the function or form
-called returns a string or a list of strings.
-
-You basically end up with a list of file names that might be used when
-saving the current article. (All ``matches'' will be used.) You will
-then be prompted for what you really want to use as a name, with file
-name completion over the results from applying this variable.
-
-This variable is @code{((gnus-article-archive-name))} by default, which
-means that Gnus will look at the articles it saves for an
-@code{Archive-name} line and use that as a suggestion for the file
-name.
-
-Here's an example function to clean up file names somewhat. If you have
-lots of mail groups called things like
-@samp{nnml:mail.whatever}, you may want to chop off the beginning of
-these group names before creating the file name to save to. The
-following will do just that:
-
-@lisp
-(defun my-save-name (group)
- (when (string-match "^nnml:mail." group)
- (substring group (match-end 0))))
-
-(setq gnus-split-methods
- '((gnus-article-archive-name)
- (my-save-name)))
-@end lisp
-
-
-@vindex gnus-use-long-file-name
-Finally, you have the @code{gnus-use-long-file-name} variable. If it is
-@code{nil}, all the preceding functions will replace all periods
-(@samp{.}) in the group names with slashes (@samp{/})---which means that
-the functions will generate hierarchies of directories instead of having
-all the files in the top level directory
-(@file{~/News/alt/andrea-dworkin} instead of
-@file{~/News/alt.andrea-dworkin}.) This variable is @code{t} by default
-on most systems. However, for historical reasons, this is @code{nil} on
-Xenix and usg-unix-v machines by default.
-
-This function also affects kill and score file names. If this variable
-is a list, and the list contains the element @code{not-score}, long file
-names will not be used for score files, if it contains the element
-@code{not-save}, long file names will not be used for saving, and if it
-contains the element @code{not-kill}, long file names will not be used
-for kill files.
-
-If you'd like to save articles in a hierarchy that looks something like
-a spool, you could
-
-@lisp
-(setq gnus-use-long-file-name '(not-save)) ; to get a hierarchy
-(setq gnus-default-article-saver 'gnus-summary-save-in-file) ; no encoding
-@end lisp
-
-Then just save with @kbd{o}. You'd then read this hierarchy with
-ephemeral @code{nneething} groups---@kbd{G D} in the group buffer, and
-the top level directory as the argument (@file{~/News/}). Then just walk
-around to the groups/directories with @code{nneething}.
-
-
-@node Decoding Articles
-@section Decoding Articles
-@cindex decoding articles
-
-Sometime users post articles (or series of articles) that have been
-encoded in some way or other. Gnus can decode them for you.
-
-@menu
-* Uuencoded Articles:: Uudecode articles.
-* Shell Archives:: Unshar articles.
-* PostScript Files:: Split PostScript.
-* Other Files:: Plain save and binhex.
-* Decoding Variables:: Variables for a happy decoding.
-* Viewing Files:: You want to look at the result of the decoding?
-@end menu
-
-@cindex series
-@cindex article series
-All these functions use the process/prefix convention
-(@pxref{Process/Prefix}) for finding out what articles to work on, with
-the extension that a ``single article'' means ``a single series''. Gnus
-can find out by itself what articles belong to a series, decode all the
-articles and unpack/view/save the resulting file(s).
-
-Gnus guesses what articles are in the series according to the following
-simplish rule: The subjects must be (nearly) identical, except for the
-last two numbers of the line. (Spaces are largely ignored, however.)
-
-For example: If you choose a subject called @samp{cat.gif (2/3)}, Gnus
-will find all the articles that match the regexp @samp{^cat.gif
-([0-9]+/[0-9]+).*$}.
-
-Subjects that are non-standard, like @samp{cat.gif (2/3) Part 6 of a
-series}, will not be properly recognized by any of the automatic viewing
-commands, and you have to mark the articles manually with @kbd{#}.
-
-
-@node Uuencoded Articles
-@subsection Uuencoded Articles
-@cindex uudecode
-@cindex uuencoded articles
-
-@table @kbd
-
-@item X u
-@kindex X u (Summary)
-@findex gnus-uu-decode-uu
-@c @icon{gnus-uu-decode-uu}
-Uudecodes the current series (@code{gnus-uu-decode-uu}).
-
-@item X U
-@kindex X U (Summary)
-@findex gnus-uu-decode-uu-and-save
-Uudecodes and saves the current series
-(@code{gnus-uu-decode-uu-and-save}).
-
-@item X v u
-@kindex X v u (Summary)
-@findex gnus-uu-decode-uu-view
-Uudecodes and views the current series (@code{gnus-uu-decode-uu-view}).
-
-@item X v U
-@kindex X v U (Summary)
-@findex gnus-uu-decode-uu-and-save-view
-Uudecodes, views and saves the current series
-(@code{gnus-uu-decode-uu-and-save-view}).
-
-@end table
-
-Remember that these all react to the presence of articles marked with
-the process mark. If, for instance, you'd like to decode and save an
-entire newsgroup, you'd typically do @kbd{M P a}
-(@code{gnus-uu-mark-all}) and then @kbd{X U}
-(@code{gnus-uu-decode-uu-and-save}).
-
-All this is very much different from how @code{gnus-uu} worked with
-@sc{gnus 4.1}, where you had explicit keystrokes for everything under
-the sun. This version of @code{gnus-uu} generally assumes that you mark
-articles in some way (@pxref{Setting Process Marks}) and then press
-@kbd{X u}.
-
-@vindex gnus-uu-notify-files
-Note: When trying to decode articles that have names matching
-@code{gnus-uu-notify-files}, which is hard-coded to
-@samp{[Cc][Ii][Nn][Dd][Yy][0-9]+.\\(gif\\|jpg\\)}, @code{gnus-uu} will
-automatically post an article on @samp{comp.unix.wizards} saying that
-you have just viewed the file in question. This feature can't be turned
-off.
-
-
-@node Shell Archives
-@subsection Shell Archives
-@cindex unshar
-@cindex shell archives
-@cindex shared articles
-
-Shell archives (``shar files'') used to be a popular way to distribute
-sources, but it isn't used all that much today. In any case, we have
-some commands to deal with these:
-
-@table @kbd
-
-@item X s
-@kindex X s (Summary)
-@findex gnus-uu-decode-unshar
-Unshars the current series (@code{gnus-uu-decode-unshar}).
-
-@item X S
-@kindex X S (Summary)
-@findex gnus-uu-decode-unshar-and-save
-Unshars and saves the current series (@code{gnus-uu-decode-unshar-and-save}).
-
-@item X v s
-@kindex X v s (Summary)
-@findex gnus-uu-decode-unshar-view
-Unshars and views the current series (@code{gnus-uu-decode-unshar-view}).
-
-@item X v S
-@kindex X v S (Summary)
-@findex gnus-uu-decode-unshar-and-save-view
-Unshars, views and saves the current series
-(@code{gnus-uu-decode-unshar-and-save-view}).
-@end table
-
-
-@node PostScript Files
-@subsection PostScript Files
-@cindex PostScript
-
-@table @kbd
-
-@item X p
-@kindex X p (Summary)
-@findex gnus-uu-decode-postscript
-Unpack the current PostScript series (@code{gnus-uu-decode-postscript}).
-
-@item X P
-@kindex X P (Summary)
-@findex gnus-uu-decode-postscript-and-save
-Unpack and save the current PostScript series
-(@code{gnus-uu-decode-postscript-and-save}).
-
-@item X v p
-@kindex X v p (Summary)
-@findex gnus-uu-decode-postscript-view
-View the current PostScript series
-(@code{gnus-uu-decode-postscript-view}).
-
-@item X v P
-@kindex X v P (Summary)
-@findex gnus-uu-decode-postscript-and-save-view
-View and save the current PostScript series
-(@code{gnus-uu-decode-postscript-and-save-view}).
-@end table
-
-
-@node Other Files
-@subsection Other Files
-
-@table @kbd
-@item X o
-@kindex X o (Summary)
-@findex gnus-uu-decode-save
-Save the current series
-(@code{gnus-uu-decode-save}).
-
-@item X b
-@kindex X b (Summary)
-@findex gnus-uu-decode-binhex
-Unbinhex the current series (@code{gnus-uu-decode-binhex}). This
-doesn't really work yet.
-@end table
-
-
-@node Decoding Variables
-@subsection Decoding Variables
-
-Adjective, not verb.
-
-@menu
-* Rule Variables:: Variables that say how a file is to be viewed.
-* Other Decode Variables:: Other decode variables.
-* Uuencoding and Posting:: Variables for customizing uuencoding.
-@end menu
-
-
-@node Rule Variables
-@subsubsection Rule Variables
-@cindex rule variables
-
-Gnus uses @dfn{rule variables} to decide how to view a file. All these
-variables are of the form
-
-@lisp
- (list '(regexp1 command2)
- '(regexp2 command2)
- ...)
-@end lisp
-
-@table @code
-
-@item gnus-uu-user-view-rules
-@vindex gnus-uu-user-view-rules
-@cindex sox
-This variable is consulted first when viewing files. If you wish to use,
-for instance, @code{sox} to convert an @samp{.au} sound file, you could
-say something like:
-@lisp
-(setq gnus-uu-user-view-rules
- (list '(\"\\\\.au$\" \"sox %s -t .aiff > /dev/audio\")))
-@end lisp
-
-@item gnus-uu-user-view-rules-end
-@vindex gnus-uu-user-view-rules-end
-This variable is consulted if Gnus couldn't make any matches from the
-user and default view rules.
-
-@item gnus-uu-user-archive-rules
-@vindex gnus-uu-user-archive-rules
-This variable can be used to say what commands should be used to unpack
-archives.
-@end table
-
-
-@node Other Decode Variables
-@subsubsection Other Decode Variables
-
-@table @code
-@vindex gnus-uu-grabbed-file-functions
-
-@item gnus-uu-grabbed-file-functions
-All functions in this list will be called right after each file has been
-successfully decoded---so that you can move or view files right away,
-and don't have to wait for all files to be decoded before you can do
-anything. Ready-made functions you can put in this list are:
-
-@table @code
-
-@item gnus-uu-grab-view
-@findex gnus-uu-grab-view
-View the file.
-
-@item gnus-uu-grab-move
-@findex gnus-uu-grab-move
-Move the file (if you're using a saving function.)
-@end table
-
-@item gnus-uu-be-dangerous
-@vindex gnus-uu-be-dangerous
-Specifies what to do if unusual situations arise during decoding. If
-@code{nil}, be as conservative as possible. If @code{t}, ignore things
-that didn't work, and overwrite existing files. Otherwise, ask each
-time.
-
-@item gnus-uu-ignore-files-by-name
-@vindex gnus-uu-ignore-files-by-name
-Files with name matching this regular expression won't be viewed.
-
-@item gnus-uu-ignore-files-by-type
-@vindex gnus-uu-ignore-files-by-type
-Files with a @sc{mime} type matching this variable won't be viewed.
-Note that Gnus tries to guess what type the file is based on the name.
-@code{gnus-uu} is not a @sc{mime} package (yet), so this is slightly
-kludgey.
-
-@item gnus-uu-tmp-dir
-@vindex gnus-uu-tmp-dir
-Where @code{gnus-uu} does its work.
-
-@item gnus-uu-do-not-unpack-archives
-@vindex gnus-uu-do-not-unpack-archives
-Non-@code{nil} means that @code{gnus-uu} won't peek inside archives
-looking for files to display.
-
-@item gnus-uu-view-and-save
-@vindex gnus-uu-view-and-save
-Non-@code{nil} means that the user will always be asked to save a file
-after viewing it.
-
-@item gnus-uu-ignore-default-view-rules
-@vindex gnus-uu-ignore-default-view-rules
-Non-@code{nil} means that @code{gnus-uu} will ignore the default viewing
-rules.
-
-@item gnus-uu-ignore-default-archive-rules
-@vindex gnus-uu-ignore-default-archive-rules
-Non-@code{nil} means that @code{gnus-uu} will ignore the default archive
-unpacking commands.
-
-@item gnus-uu-kill-carriage-return
-@vindex gnus-uu-kill-carriage-return
-Non-@code{nil} means that @code{gnus-uu} will strip all carriage returns
-from articles.
-
-@item gnus-uu-unmark-articles-not-decoded
-@vindex gnus-uu-unmark-articles-not-decoded
-Non-@code{nil} means that @code{gnus-uu} will mark unsuccessfully
-decoded articles as unread.
-
-@item gnus-uu-correct-stripped-uucode
-@vindex gnus-uu-correct-stripped-uucode
-Non-@code{nil} means that @code{gnus-uu} will @emph{try} to fix
-uuencoded files that have had trailing spaces deleted.
-
-@item gnus-uu-pre-uudecode-hook
-@vindex gnus-uu-pre-uudecode-hook
-Hook run before sending a message to @code{uudecode}.
-
-@item gnus-uu-view-with-metamail
-@vindex gnus-uu-view-with-metamail
-@cindex metamail
-Non-@code{nil} means that @code{gnus-uu} will ignore the viewing
-commands defined by the rule variables and just fudge a @sc{mime}
-content type based on the file name. The result will be fed to
-@code{metamail} for viewing.
-
-@item gnus-uu-save-in-digest
-@vindex gnus-uu-save-in-digest
-Non-@code{nil} means that @code{gnus-uu}, when asked to save without
-decoding, will save in digests. If this variable is @code{nil},
-@code{gnus-uu} will just save everything in a file without any
-embellishments. The digesting almost conforms to RFC1153---no easy way
-to specify any meaningful volume and issue numbers were found, so I
-simply dropped them.
-
-@end table
-
-
-@node Uuencoding and Posting
-@subsubsection Uuencoding and Posting
-
-@table @code
-
-@item gnus-uu-post-include-before-composing
-@vindex gnus-uu-post-include-before-composing
-Non-@code{nil} means that @code{gnus-uu} will ask for a file to encode
-before you compose the article. If this variable is @code{t}, you can
-either include an encoded file with @kbd{C-c C-i} or have one included
-for you when you post the article.
-
-@item gnus-uu-post-length
-@vindex gnus-uu-post-length
-Maximum length of an article. The encoded file will be split into how
-many articles it takes to post the entire file.
-
-@item gnus-uu-post-threaded
-@vindex gnus-uu-post-threaded
-Non-@code{nil} means that @code{gnus-uu} will post the encoded file in a
-thread. This may not be smart, as no other decoder I have seen is able
-to follow threads when collecting uuencoded articles. (Well, I have
-seen one package that does that---@code{gnus-uu}, but somehow, I don't
-think that counts...) Default is @code{nil}.
-
-@item gnus-uu-post-separate-description
-@vindex gnus-uu-post-separate-description
-Non-@code{nil} means that the description will be posted in a separate
-article. The first article will typically be numbered (0/x). If this
-variable is @code{nil}, the description the user enters will be included
-at the beginning of the first article, which will be numbered (1/x).
-Default is @code{t}.
-
-@end table
-
-
-@node Viewing Files
-@subsection Viewing Files
-@cindex viewing files
-@cindex pseudo-articles
-
-After decoding, if the file is some sort of archive, Gnus will attempt
-to unpack the archive and see if any of the files in the archive can be
-viewed. For instance, if you have a gzipped tar file @file{pics.tar.gz}
-containing the files @file{pic1.jpg} and @file{pic2.gif}, Gnus will
-uncompress and de-tar the main file, and then view the two pictures.
-This unpacking process is recursive, so if the archive contains archives
-of archives, it'll all be unpacked.
-
-Finally, Gnus will normally insert a @dfn{pseudo-article} for each
-extracted file into the summary buffer. If you go to these
-``articles'', you will be prompted for a command to run (usually Gnus
-will make a suggestion), and then the command will be run.
-
-@vindex gnus-view-pseudo-asynchronously
-If @code{gnus-view-pseudo-asynchronously} is @code{nil}, Emacs will wait
-until the viewing is done before proceeding.
-
-@vindex gnus-view-pseudos
-If @code{gnus-view-pseudos} is @code{automatic}, Gnus will not insert
-the pseudo-articles into the summary buffer, but view them
-immediately. If this variable is @code{not-confirm}, the user won't even
-be asked for a confirmation before viewing is done.
-
-@vindex gnus-view-pseudos-separately
-If @code{gnus-view-pseudos-separately} is non-@code{nil}, one
-pseudo-article will be created for each file to be viewed. If
-@code{nil}, all files that use the same viewing command will be given as
-a list of parameters to that command.
-
-@vindex gnus-insert-pseudo-articles
-If @code{gnus-insert-pseudo-articles} is non-@code{nil}, insert
-pseudo-articles when decoding. It is @code{t} by default.
-
-So; there you are, reading your @emph{pseudo-articles} in your
-@emph{virtual newsgroup} from the @emph{virtual server}; and you think:
-Why isn't anything real anymore? How did we get here?
-
-
-@node Article Treatment
-@section Article Treatment
-
-Reading through this huge manual, you may have quite forgotten that the
-object of newsreaders is to actually, like, read what people have
-written. Reading articles. Unfortunately, people are quite bad at
-writing, so there are tons of functions and variables to make reading
-these articles easier.
-
-@menu
-* Article Highlighting:: You want to make the article look like fruit salad.
-* Article Fontisizing:: Making emphasized text look nice.
-* Article Hiding:: You also want to make certain info go away.
-* Article Washing:: Lots of way-neat functions to make life better.
-* Article Buttons:: Click on URLs, Message-IDs, addresses and the like.
-* Article Date:: Grumble, UT!
-* Article Signature:: What is a signature?
-@end menu
-
-
-@node Article Highlighting
-@subsection Article Highlighting
-@cindex highlighting
-
-Not only do you want your article buffer to look like fruit salad, but
-you want it to look like technicolor fruit salad.
-
-@table @kbd
-
-@item W H a
-@kindex W H a (Summary)
-@findex gnus-article-highlight
-@findex gnus-article-maybe-highlight
-Do much highlighting of the current article
-(@code{gnus-article-highlight}). This function highlights header, cited
-text, the signature, and adds buttons to the body and the head.
-
-Most users would prefer using @code{gnus-article-maybe-highlight} in
-@code{gnus-article-display-hook} (@pxref{Customizing Articles}) instead.
-This is a bit less agressive---it highlights only the headers, the
-signature and adds buttons.
-
-@item W H h
-@kindex W H h (Summary)
-@findex gnus-article-highlight-headers
-@vindex gnus-header-face-alist
-Highlight the headers (@code{gnus-article-highlight-headers}). The
-highlighting will be done according to the @code{gnus-header-face-alist}
-variable, which is a list where each element has the form @var{(regexp
-name content)}. @var{regexp} is a regular expression for matching the
-header, @var{name} is the face used for highlighting the header name
-(@pxref{Faces and Fonts}) and @var{content} is the face for highlighting
-the header value. The first match made will be used. Note that
-@var{regexp} shouldn't have @samp{^} prepended---Gnus will add one.
-
-@item W H c
-@kindex W H c (Summary)
-@findex gnus-article-highlight-citation
-Highlight cited text (@code{gnus-article-highlight-citation}).
-
-Some variables to customize the citation highlights:
-
-@table @code
-@vindex gnus-cite-parse-max-size
-
-@item gnus-cite-parse-max-size
-If the article size if bigger than this variable (which is 25000 by
-default), no citation highlighting will be performed.
-
-@item gnus-cite-prefix-regexp
-@vindex gnus-cite-prefix-regexp
-Regexp matching the longest possible citation prefix on a line.
-
-@item gnus-cite-max-prefix
-@vindex gnus-cite-max-prefix
-Maximum possible length for a citation prefix (default 20).
-
-@item gnus-cite-face-list
-@vindex gnus-cite-face-list
-List of faces used for highlighting citations (@pxref{Faces and Fonts}).
-When there are citations from multiple articles in the same message,
-Gnus will try to give each citation from each article its own face.
-This should make it easier to see who wrote what.
-
-@item gnus-supercite-regexp
-@vindex gnus-supercite-regexp
-Regexp matching normal Supercite attribution lines.
-
-@item gnus-supercite-secondary-regexp
-@vindex gnus-supercite-secondary-regexp
-Regexp matching mangled Supercite attribution lines.
-
-@item gnus-cite-minimum-match-count
-@vindex gnus-cite-minimum-match-count
-Minimum number of identical prefixes we have to see before we believe
-that it's a citation.
-
-@item gnus-cite-attribution-prefix
-@vindex gnus-cite-attribution-prefix
-Regexp matching the beginning of an attribution line.
-
-@item gnus-cite-attribution-suffix
-@vindex gnus-cite-attribution-suffix
-Regexp matching the end of an attribution line.
-
-@item gnus-cite-attribution-face
-@vindex gnus-cite-attribution-face
-Face used for attribution lines. It is merged with the face for the
-cited text belonging to the attribution.
-
-@end table
-
-
-@item W H s
-@kindex W H s (Summary)
-@vindex gnus-signature-separator
-@vindex gnus-signature-face
-@findex gnus-article-highlight-signature
-Highlight the signature (@code{gnus-article-highlight-signature}).
-Everything after @code{gnus-signature-separator} (@pxref{Article
-Signature}) in an article will be considered a signature and will be
-highlighted with @code{gnus-signature-face}, which is @code{italic} by
-default.
-
-@end table
-
-@xref{Customizing Articles} for how to highlight articles automatically.
-
-
-@node Article Fontisizing
-@subsection Article Fontisizing
-@cindex emphasis
-@cindex article emphasis
-
-@findex gnus-article-emphasize
-@kindex W e (Summary)
-People commonly add emphasis to words in news articles by writing things
-like @samp{_this_} or @samp{*this*}. Gnus can make this look nicer by
-running the article through the @kbd{W e}
-(@code{gnus-article-emphasize}) command.
-
-@vindex gnus-emphasis-alist
-How the emphasis is computed is controlled by the
-@code{gnus-emphasis-alist} variable. This is an alist where the first
-element is a regular expression to be matched. The second is a number
-that says what regular expression grouping is used to find the entire
-emphasized word. The third is a number that says what regexp grouping
-should be displayed and highlighted. (The text between these two
-groupings will be hidden.) The fourth is the face used for
-highlighting.
-
-@lisp
-(setq gnus-article-emphasis
- '(("_\\(\\w+\\)_" 0 1 gnus-emphasis-underline)
- ("\\*\\(\\w+\\)\\*" 0 1 gnus-emphasis-bold)))
-@end lisp
-
-@vindex gnus-emphasis-underline
-@vindex gnus-emphasis-bold
-@vindex gnus-emphasis-italic
-@vindex gnus-emphasis-underline-bold
-@vindex gnus-emphasis-underline-italic
-@vindex gnus-emphasis-bold-italic
-@vindex gnus-emphasis-underline-bold-italic
-By default, there are seven rules, and they use the following faces:
-@code{gnus-emphasis-bold}, @code{gnus-emphasis-italic},
-@code{gnus-emphasis-underline}, @code{gnus-emphasis-bold-italic},
-@code{gnus-emphasis-underline-italic},
-@code{gnus-emphasis-underline-bold}, and
-@code{gnus-emphasis-underline-bold-italic}.
-
-If you want to change these faces, you can either use @kbd{M-x
-customize}, or you can use @code{copy-face}. For instance, if you want
-to make @code{gnus-emphasis-italic} use a red face instead, you could
-say something like:
-
-@lisp
-(copy-face 'red 'gnus-emphasis-italic)
-@end lisp
-
-@xref{Customizing Articles} for how to fontize articles automatically.
-
-
-@node Article Hiding
-@subsection Article Hiding
-@cindex article hiding
-
-Or rather, hiding certain things in each article. There usually is much
-too much cruft in most articles.
-
-@table @kbd
-
-@item W W a
-@kindex W W a (Summary)
-@findex gnus-article-hide
-Do quite a lot of hiding on the article buffer
-(@kbd{gnus-article-hide}). In particular, this function will hide
-headers, PGP, cited text and the signature.
-
-@item W W h
-@kindex W W h (Summary)
-@findex gnus-article-hide-headers
-Hide headers (@code{gnus-article-hide-headers}). @xref{Hiding
-Headers}.
-
-@item W W b
-@kindex W W b (Summary)
-@findex gnus-article-hide-boring-headers
-Hide headers that aren't particularly interesting
-(@code{gnus-article-hide-boring-headers}). @xref{Hiding Headers}.
-
-@item W W s
-@kindex W W s (Summary)
-@findex gnus-article-hide-signature
-Hide signature (@code{gnus-article-hide-signature}). @xref{Article
-Signature}.
-
-@item W W p
-@kindex W W p (Summary)
-@findex gnus-article-hide-pgp
-@vindex gnus-article-hide-pgp-hook
-Hide @sc{pgp} signatures (@code{gnus-article-hide-pgp}). The
-@code{gnus-article-hide-pgp-hook} hook will be run after a @sc{pgp}
-signature has been hidden. For example, to automatically verify
-articles that have signatures in them do:
-@lisp
-;;; Hide pgp cruft if any.
-
-(add-hook 'gnus-article-display-hook 'gnus-article-hide-pgp)
-
-;;; After hiding pgp, verify the message;
-;;; only happens if pgp signature is found.
-
-(add-hook 'gnus-article-hide-pgp-hook
- (lambda ()
- (save-excursion
- (set-buffer gnus-original-article-buffer)
- (mc-verify))))
-@end lisp
-
-@item W W P
-@kindex W W P (Summary)
-@findex gnus-article-hide-pem
-Hide @sc{pem} (privacy enhanced messages) cruft
-(@code{gnus-article-hide-pem}).
-
-@item W W c
-@kindex W W c (Summary)
-@findex gnus-article-hide-citation
-Hide citation (@code{gnus-article-hide-citation}). Some variables for
-customizing the hiding:
-
-@table @code
-
-@item gnus-cited-opened-text-button-line-format
-@itemx gnus-cited-closed-text-button-line-format
-@vindex gnus-cited-closed-text-button-line-format
-@vindex gnus-cited-opened-text-button-line-format
-Gnus adds buttons to show where the cited text has been hidden, and to
-allow toggle hiding the text. The format of the variable is specified
-by these format-like variable (@pxref{Formatting Variables}). These
-specs are valid:
-
-@table @samp
-@item b
-Starting point of the hidden text.
-@item e
-Ending point of the hidden text.
-@item l
-Number of characters in the hidden region.
-@item n
-Number of lines of hidden text.
-@end table
-
-@item gnus-cited-lines-visible
-@vindex gnus-cited-lines-visible
-The number of lines at the beginning of the cited text to leave shown.
-
-@end table
-
-@item W W C-c
-@kindex W W C-c (Summary)
-@findex gnus-article-hide-citation-maybe
-
-Hide citation (@code{gnus-article-hide-citation-maybe}) depending on the
-following two variables:
-
-@table @code
-@item gnus-cite-hide-percentage
-@vindex gnus-cite-hide-percentage
-If the cited text is of a bigger percentage than this variable (default
-50), hide the cited text.
-
-@item gnus-cite-hide-absolute
-@vindex gnus-cite-hide-absolute
-The cited text must have at least this length (default 10) before it
-is hidden.
-@end table
-
-@item W W C
-@kindex W W C (Summary)
-@findex gnus-article-hide-citation-in-followups
-Hide cited text in articles that aren't roots
-(@code{gnus-article-hide-citation-in-followups}). This isn't very
-useful as an interactive command, but might be a handy function to stick
-in @code{gnus-article-display-hook} (@pxref{Customizing Articles}).
-
-@end table
-
-All these ``hiding'' commands are toggles, but if you give a negative
-prefix to these commands, they will show what they have previously
-hidden. If you give a positive prefix, they will always hide.
-
-Also @pxref{Article Highlighting} for further variables for
-citation customization.
-
-@xref{Customizing Articles} for how to hide article elements
-automatically.
-
-
-@node Article Washing
-@subsection Article Washing
-@cindex washing
-@cindex article washing
-
-We call this ``article washing'' for a really good reason. Namely, the
-@kbd{A} key was taken, so we had to use the @kbd{W} key instead.
-
-@dfn{Washing} is defined by us as ``changing something from something to
-something else'', but normally results in something looking better.
-Cleaner, perhaps.
-
-@table @kbd
-
-@item W l
-@kindex W l (Summary)
-@findex gnus-summary-stop-page-breaking
-Remove page breaks from the current article
-(@code{gnus-summary-stop-page-breaking}). @xref{Misc Article} for page
-delimiters.
-
-@item W r
-@kindex W r (Summary)
-@findex gnus-summary-caesar-message
-@c @icon{gnus-summary-caesar-message}
-Do a Caesar rotate (rot13) on the article buffer
-(@code{gnus-summary-caesar-message}).
-Unreadable articles that tell you to read them with Caesar rotate or rot13.
-(Typically offensive jokes and such.)
-
-It's commonly called ``rot13'' because each letter is rotated 13
-positions in the alphabet, e. g. @samp{B} (letter #2) -> @samp{O} (letter
-#15). It is sometimes referred to as ``Caesar rotate'' because Caesar
-is rumored to have employed this form of, uh, somewhat weak encryption.
-
-@item W t
-@kindex W t (Summary)
-@findex gnus-summary-toggle-header
-Toggle whether to display all headers in the article buffer
-(@code{gnus-summary-toggle-header}).
-
-@item W v
-@kindex W v (Summary)
-@findex gnus-summary-verbose-header
-Toggle whether to display all headers in the article buffer permanently
-(@code{gnus-summary-verbose-header}).
-
-@item W m
-@kindex W m (Summary)
-@findex gnus-summary-toggle-mime
-Toggle whether to run the article through @sc{mime} before displaying
-(@code{gnus-summary-toggle-mime}).
-
-@item W o
-@kindex W o (Summary)
-@findex gnus-article-treat-overstrike
-Treat overstrike (@code{gnus-article-treat-overstrike}).
-
-@item W d
-@kindex W d (Summary)
-@findex gnus-article-treat-dumbquotes
-@vindex gnus-article-dumbquotes-map
-@cindex Smartquotes
-@cindex M******** sm*rtq**t*s
-@cindex Latin 1
-Treat M******** sm*rtq**t*s according to
-@code{gnus-article-dumbquotes-map}
-(@code{gnus-article-treat-dumbquotes}).
-
-@item W w
-@kindex W w (Summary)
-@findex gnus-article-fill-cited-article
-Do word wrap (@code{gnus-article-fill-cited-article}). If you use this
-function in @code{gnus-article-display-hook}, it should be run fairly
-late and certainly after any highlighting.
-
-You can give the command a numerical prefix to specify the width to use
-when filling.
-
-@item W c
-@kindex W c (Summary)
-@findex gnus-article-remove-cr
-Translate CRLF pairs (i. e., @samp{^M}s on the end of the lines) into LF
-(this takes care of DOS line endings), and then translate any remaining
-CRs into LF (this takes care of Mac line endings)
-(@code{gnus-article-remove-cr}).
-
-@item W q
-@kindex W q (Summary)
-@findex gnus-article-de-quoted-unreadable
-Treat quoted-printable (@code{gnus-article-de-quoted-unreadable}).
-Quoted-Printable is one common @sc{mime} encoding employed when sending
-non-ASCII (i. e., 8-bit) articles. It typically makes strings like
-@samp{déjà vu} look like @samp{d=E9j=E0 vu}, which doesn't look very
-readable to me.
-
-@item W f
-@kindex W f (Summary)
-@cindex x-face
-@findex gnus-article-display-x-face
-@findex gnus-article-x-face-command
-@vindex gnus-article-x-face-command
-@vindex gnus-article-x-face-too-ugly
-@iftex
-@iflatex
-\include{xface}
-@end iflatex
-@end iftex
-Look for and display any X-Face headers
-(@code{gnus-article-display-x-face}). The command executed by this
-function is given by the @code{gnus-article-x-face-command} variable.
-If this variable is a string, this string will be executed in a
-sub-shell. If it is a function, this function will be called with the
-face as the argument. If the @code{gnus-article-x-face-too-ugly} (which
-is a regexp) matches the @code{From} header, the face will not be shown.
-The default action under Emacs is to fork off an @code{xv} to view the
-face; under XEmacs the default action is to display the face before the
-@code{From} header. (It's nicer if XEmacs has been compiled with X-Face
-support---that will make display somewhat faster. If there's no native
-X-Face support, Gnus will try to convert the @code{X-Face} header using
-external programs from the @code{pbmplus} package and friends.) If you
-want to have this function in the display hook, it should probably come
-last.
-
-@item W b
-@kindex W b (Summary)
-@findex gnus-article-add-buttons
-Add clickable buttons to the article (@code{gnus-article-add-buttons}).
-@xref{Article Buttons}.
-
-@item W B
-@kindex W B (Summary)
-@findex gnus-article-add-buttons-to-head
-Add clickable buttons to the article headers
-(@code{gnus-article-add-buttons-to-head}).
-
-@item W E l
-@kindex W E l (Summary)
-@findex gnus-article-strip-leading-blank-lines
-Remove all blank lines from the beginning of the article
-(@code{gnus-article-strip-leading-blank-lines}).
-
-@item W E m
-@kindex W E m (Summary)
-@findex gnus-article-strip-multiple-blank-lines
-Replace all blank lines with empty lines and then all multiple empty
-lines with a single empty line.
-(@code{gnus-article-strip-multiple-blank-lines}).
-
-@item W E t
-@kindex W E t (Summary)
-@findex gnus-article-remove-trailing-blank-lines
-Remove all blank lines at the end of the article
-(@code{gnus-article-remove-trailing-blank-lines}).
-
-@item W E a
-@kindex W E a (Summary)
-@findex gnus-article-strip-blank-lines
-Do all the three commands above
-(@code{gnus-article-strip-blank-lines}).
-
-@item W E A
-@kindex W E A (Summary)
-@findex gnus-article-strip-all-blank-lines
-Remove all blank lines
-(@code{gnus-article-strip-all-blank-lines}).
-
-@item W E s
-@kindex W E s (Summary)
-@findex gnus-article-strip-leading-space
-Remove all white space from the beginning of all lines of the article
-body (@code{gnus-article-strip-leading-space}).
-
-@item W E e
-@kindex W E e (Summary)
-@findex gnus-article-strip-trailing-space
-Remove all white space from the end of all lines of the article
-body (@code{gnus-article-strip-trailing-space}).
-
-@end table
-
-@xref{Customizing Articles} for how to wash articles automatically.
-
-
-@node Article Buttons
-@subsection Article Buttons
-@cindex buttons
-
-People often include references to other stuff in articles, and it would
-be nice if Gnus could just fetch whatever it is that people talk about
-with the minimum of fuzz when you hit @kbd{RET} or use the middle mouse
-button on these references.
-
-Gnus adds @dfn{buttons} to certain standard references by default:
-Well-formed URLs, mail addresses and Message-IDs. This is controlled by
-two variables, one that handles article bodies and one that handles
-article heads:
-
-@table @code
-
-@item gnus-button-alist
-@vindex gnus-button-alist
-This is an alist where each entry has this form:
-
-@lisp
-(REGEXP BUTTON-PAR USE-P FUNCTION DATA-PAR)
-@end lisp
-
-@table @var
-
-@item regexp
-All text that match this regular expression will be considered an
-external reference. Here's a typical regexp that matches embedded URLs:
-@samp{<URL:\\([^\n\r>]*\\)>}.
-
-@item button-par
-Gnus has to know which parts of the matches is to be highlighted. This
-is a number that says what sub-expression of the regexp is to be
-highlighted. If you want it all highlighted, you use 0 here.
-
-@item use-p
-This form will be @code{eval}ed, and if the result is non-@code{nil},
-this is considered a match. This is useful if you want extra sifting to
-avoid false matches.
-
-@item function
-This function will be called when you click on this button.
-
-@item data-par
-As with @var{button-par}, this is a sub-expression number, but this one
-says which part of the match is to be sent as data to @var{function}.
-
-@end table
-
-So the full entry for buttonizing URLs is then
-
-@lisp
-("<URL:\\([^\n\r>]*\\)>" 0 t gnus-button-url 1)
-@end lisp
-
-@item gnus-header-button-alist
-@vindex gnus-header-button-alist
-This is just like the other alist, except that it is applied to the
-article head only, and that each entry has an additional element that is
-used to say what headers to apply the buttonize coding to:
-
-@lisp
-(HEADER REGEXP BUTTON-PAR USE-P FUNCTION DATA-PAR)
-@end lisp
-
-@var{HEADER} is a regular expression.
-
-@item gnus-button-url-regexp
-@vindex gnus-button-url-regexp
-A regular expression that matches embedded URLs. It is used in the
-default values of the variables above.
-
-@item gnus-article-button-face
-@vindex gnus-article-button-face
-Face used on buttons.
-
-@item gnus-article-mouse-face
-@vindex gnus-article-mouse-face
-Face used when the mouse cursor is over a button.
-
-@end table
-
-@xref{Customizing Articles} for how to buttonize articles automatically.
-
-
-@node Article Date
-@subsection Article Date
-
-The date is most likely generated in some obscure timezone you've never
-heard of, so it's quite nice to be able to find out what the time was
-when the article was sent.
-
-@table @kbd
-
-@item W T u
-@kindex W T u (Summary)
-@findex gnus-article-date-ut
-Display the date in UT (aka. GMT, aka ZULU)
-(@code{gnus-article-date-ut}).
-
-@item W T i
-@kindex W T i (Summary)
-@findex gnus-article-date-iso8601
-@cindex ISO 8601
-Display the date in international format, aka. ISO 8601
-(@code{gnus-article-date-iso8601}).
-
-@item W T l
-@kindex W T l (Summary)
-@findex gnus-article-date-local
-Display the date in the local timezone (@code{gnus-article-date-local}).
-
-@item W T s
-@kindex W T s (Summary)
-@vindex gnus-article-time-format
-@findex gnus-article-date-user
-@findex format-time-string
-Display the date using a user-defined format
-(@code{gnus-article-date-user}). The format is specified by the
-@code{gnus-article-time-format} variable, and is a string that's passed
-to @code{format-time-string}. See the documentation of that variable
-for a list of possible format specs.
-
-@item W T e
-@kindex W T e (Summary)
-@findex gnus-article-date-lapsed
-@findex gnus-start-date-timer
-@findex gnus-stop-date-timer
-Say how much time has elapsed between the article was posted and now
-(@code{gnus-article-date-lapsed}). If you want to have this line
-updated continually, you can put
-
-@lisp
-(gnus-start-date-timer)
-@end lisp
-
-in your @file{.gnus.el} file, or you can run it off of some hook. If
-you want to stop the timer, you can use the @code{gnus-stop-date-timer}
-command.
-
-@item W T o
-@kindex W T o (Summary)
-@findex gnus-article-date-original
-Display the original date (@code{gnus-article-date-original}). This can
-be useful if you normally use some other conversion function and are
-worried that it might be doing something totally wrong. Say, claiming
-that the article was posted in 1854. Although something like that is
-@emph{totally} impossible. Don't you trust me? *titter*
-
-@end table
-
-@xref{Customizing Articles} for how to display the date in your
-preferred format automatically.
-
-
-@node Article Signature
-@subsection Article Signature
-@cindex signatures
-@cindex article signature
-
-@vindex gnus-signature-separator
-Each article is divided into two parts---the head and the body. The
-body can be divided into a signature part and a text part. The variable
-that says what is to be considered a signature is
-@code{gnus-signature-separator}. This is normally the standard
-@samp{^-- $} as mandated by son-of-RFC 1036. However, many people use
-non-standard signature separators, so this variable can also be a list
-of regular expressions to be tested, one by one. (Searches are done
-from the end of the body towards the beginning.) One likely value is:
-
-@lisp
-(setq gnus-signature-separator
- '("^-- $" ; The standard
- "^-- *$" ; A common mangling
- "^-------*$" ; Many people just use a looong
- ; line of dashes. Shame!
- "^ *--------*$" ; Double-shame!
- "^________*$" ; Underscores are also popular
- "^========*$")) ; Pervert!
-@end lisp
-
-The more permissive you are, the more likely it is that you'll get false
-positives.
-
-@vindex gnus-signature-limit
-@code{gnus-signature-limit} provides a limit to what is considered a
-signature.
-
-@enumerate
-@item
-If it is an integer, no signature may be longer (in characters) than
-that integer.
-@item
-If it is a floating point number, no signature may be longer (in lines)
-than that number.
-@item
-If it is a function, the function will be called without any parameters,
-and if it returns @code{nil}, there is no signature in the buffer.
-@item
-If it is a string, it will be used as a regexp. If it matches, the text
-in question is not a signature.
-@end enumerate
-
-This variable can also be a list where the elements may be of the types
-listed above. Here's an example:
-
-@lisp
-(setq gnus-signature-limit
- '(200.0 "^---*Forwarded article"))
-@end lisp
-
-This means that if there are more than 200 lines after the signature
-separator, or the text after the signature separator is matched by
-the regular expression @samp{^---*Forwarded article}, then it isn't a
-signature after all.
-
-
-@node MIME Commands
-@section MIME Commands
-@cindex MIME decoding
-
-@table @kbd
-@item M-tgnus-summary-display-buttonized
-@kindex M-t (Summary)
-@findex gnus-summary-display-buttonized
-Toggle the buttonized display of the article buffer
-(@code{gnus-summary-toggle-display-buttonized}).
-
-@item W M w
-@kindex W M w (Summary)
-Decode RFC2047-encoded words in the article headers
-(@code{gnus-article-decode-mime-words}).
-
-@item W M c
-@kindex W M c (Summary)
-Decode encoded article bodies as well as charsets
-(@code{gnus-article-decode-charset}).
-
-This command looks in the @code{Content-Type} header to determine the
-charset. If there is no such header in the article, you can give it a
-prefix, which will prompt for the charset to decode as. In regional
-groups where people post using some common encoding (but do not include
-MIME headers), you can set the @code{charset} group/topic parameter to
-the required charset (@pxref{Group Parameters}).
-
-@item W M v
-@kindex W M v (Summary)
-View all the @sc{mime} parts in the current article
-(@code{gnus-mime-view-all-parts}).
-
-@end table
-
-Relevant variables:
-
-@table @code
-@item gnus-ignored-mime-types
-@vindex gnus-ignored-mime-types
-This is a list of regexps. @sc{mime} types that match a regexp from
-this list will be completely ignored by Gnus. The default value is
-@code{nil}.
-
-To have all Vcards be ignored, you'd say something like this:
-
-@lisp
-(setq gnus-ignored-mime-types
- '("text/x-vcard"))
-@end lisp
-
-@item gnus-unbuttonized-mime-types
-@vindex gnus-unbuttonized-mime-types
-This is a list of regexps. @sc{mime} types that match a regexp from
-this list won't have @sc{mime} buttons inserted unless they aren't
-displayed. The default value is @code{(".*/.*")}.
-
-@item gnus-article-mime-part-function
-@vindex gnus-article-mime-part-function
-For each @sc{mime} part, this function will be called with the @sc{mime}
-handle as the parameter. The function is meant to be used to allow
-users to gather information from the article (e. g., add Vcard info to
-the bbdb database) or to do actions based on parts (e. g., automatically
-save all jpegs into some directory).
-
-Here's an example function the does the latter:
-
-@lisp
-(defun my-save-all-jpeg-parts (handle)
- (when (equal (car (mm-handle-type handle)) "image/jpeg")
- (with-temp-buffer
- (insert (mm-get-part handle))
- (write-region (point-min) (point-max)
- (read-file-name "Save jpeg to: ")))))
-(setq gnus-article-mime-part-function
- 'my-save-all-jpeg-parts)
-@end lisp
-
-@end table
-
-
-@node Article Commands
-@section Article Commands
-
-@table @kbd
-
-@item A P
-@cindex PostScript
-@cindex printing
-@kindex A P (Summary)
-@vindex gnus-ps-print-hook
-@findex gnus-summary-print-article
-Generate and print a PostScript image of the article buffer
-(@code{gnus-summary-print-article}). @code{gnus-ps-print-hook} will be
-run just before printing the buffer.
-
-@end table
-
-
-@node Summary Sorting
-@section Summary Sorting
-@cindex summary sorting
-
-You can have the summary buffer sorted in various ways, even though I
-can't really see why you'd want that.
-
-@table @kbd
-
-@item C-c C-s C-n
-@kindex C-c C-s C-n (Summary)
-@findex gnus-summary-sort-by-number
-Sort by article number (@code{gnus-summary-sort-by-number}).
-
-@item C-c C-s C-a
-@kindex C-c C-s C-a (Summary)
-@findex gnus-summary-sort-by-author
-Sort by author (@code{gnus-summary-sort-by-author}).
-
-@item C-c C-s C-s
-@kindex C-c C-s C-s (Summary)
-@findex gnus-summary-sort-by-subject
-Sort by subject (@code{gnus-summary-sort-by-subject}).
-
-@item C-c C-s C-d
-@kindex C-c C-s C-d (Summary)
-@findex gnus-summary-sort-by-date
-Sort by date (@code{gnus-summary-sort-by-date}).
-
-@item C-c C-s C-l
-@kindex C-c C-s C-l (Summary)
-@findex gnus-summary-sort-by-lines
-Sort by lines (@code{gnus-summary-sort-by-lines}).
-
-@item C-c C-s C-i
-@kindex C-c C-s C-i (Summary)
-@findex gnus-summary-sort-by-score
-Sort by score (@code{gnus-summary-sort-by-score}).
-@end table
-
-These functions will work both when you use threading and when you don't
-use threading. In the latter case, all summary lines will be sorted,
-line by line. In the former case, sorting will be done on a
-root-by-root basis, which might not be what you were looking for. To
-toggle whether to use threading, type @kbd{T T} (@pxref{Thread
-Commands}).
-
-
-@node Finding the Parent
-@section Finding the Parent
-@cindex parent articles
-@cindex referring articles
-
-@table @kbd
-@item ^
-@kindex ^ (Summary)
-@findex gnus-summary-refer-parent-article
-If you'd like to read the parent of the current article, and it is not
-displayed in the summary buffer, you might still be able to. That is,
-if the current group is fetched by @sc{nntp}, the parent hasn't expired
-and the @code{References} in the current article are not mangled, you
-can just press @kbd{^} or @kbd{A r}
-(@code{gnus-summary-refer-parent-article}). If everything goes well,
-you'll get the parent. If the parent is already displayed in the
-summary buffer, point will just move to this article.
-
-If given a positive numerical prefix, fetch that many articles back into
-the ancestry. If given a negative numerical prefix, fetch just that
-ancestor. So if you say @kbd{3 ^}, Gnus will fetch the parent, the
-grandparent and the grandgrandparent of the current article. If you say
-@kbd{-3 ^}, Gnus will only fetch the grandgrandparent of the current
-article.
-
-@item A R (Summary)
-@findex gnus-summary-refer-references
-@kindex A R (Summary)
-Fetch all articles mentioned in the @code{References} header of the
-article (@code{gnus-summary-refer-references}).
-
-@item A T (Summary)
-@findex gnus-summary-refer-thread
-@kindex A T (Summary)
-Display the full thread where the current article appears
-(@code{gnus-summary-refer-thread}). This command has to fetch all the
-headers in the current group to work, so it usually takes a while. If
-you do it often, you may consider setting @code{gnus-fetch-old-headers}
-to @code{invisible} (@pxref{Filling In Threads}). This won't have any
-visible effects normally, but it'll make this command work a whole lot
-faster. Of course, it'll make group entry somewhat slow.
-
-@vindex gnus-refer-thread-limit
-The @code{gnus-refer-thread-limit} variable says how many old (i. e.,
-articles before the first displayed in the current group) headers to
-fetch when doing this command. The default is 200. If @code{t}, all
-the available headers will be fetched. This variable can be overridden
-by giving the @kbd{A T} command a numerical prefix.
-
-@item M-^ (Summary)
-@findex gnus-summary-refer-article
-@kindex M-^ (Summary)
-@cindex Message-ID
-@cindex fetching by Message-ID
-You can also ask the @sc{nntp} server for an arbitrary article, no
-matter what group it belongs to. @kbd{M-^}
-(@code{gnus-summary-refer-article}) will ask you for a
-@code{Message-ID}, which is one of those long, hard-to-read thingies
-that look something like @samp{<38o6up$6f2@@hymir.ifi.uio.no>}. You
-have to get it all exactly right. No fuzzy searches, I'm afraid.
-@end table
-
-The current select method will be used when fetching by
-@code{Message-ID} from non-news select method, but you can override this
-by giving this command a prefix.
-
-@vindex gnus-refer-article-method
-If the group you are reading is located on a backend that does not
-support fetching by @code{Message-ID} very well (like @code{nnspool}),
-you can set @code{gnus-refer-article-method} to an @sc{nntp} method. It
-would, perhaps, be best if the @sc{nntp} server you consult is the one
-updating the spool you are reading from, but that's not really
-necessary.
-
-Most of the mail backends support fetching by @code{Message-ID}, but do
-not do a particularly excellent job at it. That is, @code{nnmbox} and
-@code{nnbabyl} are able to locate articles from any groups, while
-@code{nnml} and @code{nnfolder} are only able to locate articles that
-have been posted to the current group. (Anything else would be too time
-consuming.) @code{nnmh} does not support this at all.
-
-
-@node Alternative Approaches
-@section Alternative Approaches
-
-Different people like to read news using different methods. This being
-Gnus, we offer a small selection of minor modes for the summary buffers.
-
-@menu
-* Pick and Read:: First mark articles and then read them.
-* Binary Groups:: Auto-decode all articles.
-@end menu
-
-
-@node Pick and Read
-@subsection Pick and Read
-@cindex pick and read
-
-Some newsreaders (like @code{nn} and, uhm, @code{Netnews} on VM/CMS) use
-a two-phased reading interface. The user first marks in a summary
-buffer the articles she wants to read. Then she starts reading the
-articles with just an article buffer displayed.
-
-@findex gnus-pick-mode
-@kindex M-x gnus-pick-mode
-Gnus provides a summary buffer minor mode that allows
-this---@code{gnus-pick-mode}. This basically means that a few process
-mark commands become one-keystroke commands to allow easy marking, and
-it provides one additional command for switching to the summary buffer.
-
-Here are the available keystrokes when using pick mode:
-
-@table @kbd
-@item .
-@kindex . (Pick)
-@findex gnus-pick-article-or-thread
-Pick the article or thread on the current line
-(@code{gnus-pick-article-or-thread}). If the variable
-@code{gnus-thread-hide-subtree} is true, then this key selects the
-entire thread when used at the first article of the thread. Otherwise,
-it selects just the article. If given a numerical prefix, go to that
-thread or article and pick it. (The line number is normally displayed
-at the beginning of the summary pick lines.)
-
-@item SPACE
-@kindex SPACE (Pick)
-@findex gnus-pick-next-page
-Scroll the summary buffer up one page (@code{gnus-pick-next-page}). If
-at the end of the buffer, start reading the picked articles.
-
-@item u
-@kindex u (Pick)
-@findex gnus-pick-unmark-article-or-thread.
-Unpick the thread or article
-(@code{gnus-pick-unmark-article-or-thread}). If the variable
-@code{gnus-thread-hide-subtree} is true, then this key unpicks the
-thread if used at the first article of the thread. Otherwise it unpicks
-just the article. You can give this key a numerical prefix to unpick
-the thread or article at that line.
-
-@item RET
-@kindex RET (Pick)
-@findex gnus-pick-start-reading
-@vindex gnus-pick-display-summary
-Start reading the picked articles (@code{gnus-pick-start-reading}). If
-given a prefix, mark all unpicked articles as read first. If
-@code{gnus-pick-display-summary} is non-@code{nil}, the summary buffer
-will still be visible when you are reading.
-
-@end table
-
-All the normal summary mode commands are still available in the
-pick-mode, with the exception of @kbd{u}. However @kbd{!} is available
-which is mapped to the same function
-@code{gnus-summary-tick-article-forward}.
-
-If this sounds like a good idea to you, you could say:
-
-@lisp
-(add-hook 'gnus-summary-mode-hook 'gnus-pick-mode)
-@end lisp
-
-@vindex gnus-pick-mode-hook
-@code{gnus-pick-mode-hook} is run in pick minor mode buffers.
-
-@vindex gnus-mark-unpicked-articles-as-read
-If @code{gnus-mark-unpicked-articles-as-read} is non-@code{nil}, mark
-all unpicked articles as read. The default is @code{nil}.
-
-@vindex gnus-summary-pick-line-format
-The summary line format in pick mode is slightly different from the
-standard format. At the beginning of each line the line number is
-displayed. The pick mode line format is controlled by the
-@code{gnus-summary-pick-line-format} variable (@pxref{Formatting
-Variables}). It accepts the same format specs that
-@code{gnus-summary-line-format} does (@pxref{Summary Buffer Lines}).
-
-
-@node Binary Groups
-@subsection Binary Groups
-@cindex binary groups
-
-@findex gnus-binary-mode
-@kindex M-x gnus-binary-mode
-If you spend much time in binary groups, you may grow tired of hitting
-@kbd{X u}, @kbd{n}, @kbd{RET} all the time. @kbd{M-x gnus-binary-mode}
-is a minor mode for summary buffers that makes all ordinary Gnus article
-selection functions uudecode series of articles and display the result
-instead of just displaying the articles the normal way.
-
-@kindex g (Binary)
-@findex gnus-binary-show-article
-The only way, in fact, to see the actual articles is the @kbd{g}
-command, when you have turned on this mode
-(@code{gnus-binary-show-article}).
-
-@vindex gnus-binary-mode-hook
-@code{gnus-binary-mode-hook} is called in binary minor mode buffers.
-
-
-@node Tree Display
-@section Tree Display
-@cindex trees
-
-@vindex gnus-use-trees
-If you don't like the normal Gnus summary display, you might try setting
-@code{gnus-use-trees} to @code{t}. This will create (by default) an
-additional @dfn{tree buffer}. You can execute all summary mode commands
-in the tree buffer.
-
-There are a few variables to customize the tree display, of course:
-
-@table @code
-@item gnus-tree-mode-hook
-@vindex gnus-tree-mode-hook
-A hook called in all tree mode buffers.
-
-@item gnus-tree-mode-line-format
-@vindex gnus-tree-mode-line-format
-A format string for the mode bar in the tree mode buffers (@pxref{Mode
-Line Formatting}). The default is @samp{Gnus: %%b %S %Z}. For a list
-of valid specs, @pxref{Summary Buffer Mode Line}.
-
-@item gnus-selected-tree-face
-@vindex gnus-selected-tree-face
-Face used for highlighting the selected article in the tree buffer. The
-default is @code{modeline}.
-
-@item gnus-tree-line-format
-@vindex gnus-tree-line-format
-A format string for the tree nodes. The name is a bit of a misnomer,
-though---it doesn't define a line, but just the node. The default value
-is @samp{%(%[%3,3n%]%)}, which displays the first three characters of
-the name of the poster. It is vital that all nodes are of the same
-length, so you @emph{must} use @samp{%4,4n}-like specifiers.
-
-Valid specs are:
-
-@table @samp
-@item n
-The name of the poster.
-@item f
-The @code{From} header.
-@item N
-The number of the article.
-@item [
-The opening bracket.
-@item ]
-The closing bracket.
-@item s
-The subject.
-@end table
-
-@xref{Formatting Variables}.
-
-Variables related to the display are:
-
-@table @code
-@item gnus-tree-brackets
-@vindex gnus-tree-brackets
-This is used for differentiating between ``real'' articles and
-``sparse'' articles. The format is @var{((real-open . real-close)
-(sparse-open . sparse-close) (dummy-open . dummy-close))}, and the
-default is @code{((?[ . ?]) (?( . ?)) (?@{ . ?@}) (?< . ?>))}.
-
-@item gnus-tree-parent-child-edges
-@vindex gnus-tree-parent-child-edges
-This is a list that contains the characters used for connecting parent
-nodes to their children. The default is @code{(?- ?\\ ?|)}.
-
-@end table
-
-@item gnus-tree-minimize-window
-@vindex gnus-tree-minimize-window
-If this variable is non-@code{nil}, Gnus will try to keep the tree
-buffer as small as possible to allow more room for the other Gnus
-windows. If this variable is a number, the tree buffer will never be
-higher than that number. The default is @code{t}. Note that if you
-have several windows displayed side-by-side in a frame and the tree
-buffer is one of these, minimizing the tree window will also resize all
-other windows displayed next to it.
-
-@item gnus-generate-tree-function
-@vindex gnus-generate-tree-function
-@findex gnus-generate-horizontal-tree
-@findex gnus-generate-vertical-tree
-The function that actually generates the thread tree. Two predefined
-functions are available: @code{gnus-generate-horizontal-tree} and
-@code{gnus-generate-vertical-tree} (which is the default).
-
-@end table
-
-Here's an example from a horizontal tree buffer:
-
-@example
-@{***@}-(***)-[odd]-[Gun]
- | \[Jan]
- | \[odd]-[Eri]
- | \(***)-[Eri]
- | \[odd]-[Paa]
- \[Bjo]
- \[Gun]
- \[Gun]-[Jor]
-@end example
-
-Here's the same thread displayed in a vertical tree buffer:
-
-@example
-@{***@}
- |--------------------------\-----\-----\
-(***) [Bjo] [Gun] [Gun]
- |--\-----\-----\ |
-[odd] [Jan] [odd] (***) [Jor]
- | | |--\
-[Gun] [Eri] [Eri] [odd]
- |
- [Paa]
-@end example
-
-If you're using horizontal trees, it might be nice to display the trees
-side-by-side with the summary buffer. You could add something like the
-following to your @file{.gnus.el} file:
-
-@lisp
-(setq gnus-use-trees t
- gnus-generate-tree-function 'gnus-generate-horizontal-tree
- gnus-tree-minimize-window nil)
-(gnus-add-configuration
- '(article
- (vertical 1.0
- (horizontal 0.25
- (summary 0.75 point)
- (tree 1.0))
- (article 1.0))))
-@end lisp
-
-@xref{Windows Configuration}.
-
-
-@node Mail Group Commands
-@section Mail Group Commands
-@cindex mail group commands
-
-Some commands only make sense in mail groups. If these commands are
-invalid in the current group, they will raise a hell and let you know.
-
-All these commands (except the expiry and edit commands) use the
-process/prefix convention (@pxref{Process/Prefix}).
-
-@table @kbd
-
-@item B e
-@kindex B e (Summary)
-@findex gnus-summary-expire-articles
-Expire all expirable articles in the group
-(@code{gnus-summary-expire-articles}).
-
-@item B M-C-e
-@kindex B M-C-e (Summary)
-@findex gnus-summary-expire-articles-now
-Delete all the expirable articles in the group
-(@code{gnus-summary-expire-articles-now}). This means that @strong{all}
-articles eligible for expiry in the current group will
-disappear forever into that big @file{/dev/null} in the sky.
-
-@item B DEL
-@kindex B DEL (Summary)
-@findex gnus-summary-delete-article
-@c @icon{gnus-summary-mail-delete}
-Delete the mail article. This is ``delete'' as in ``delete it from your
-disk forever and ever, never to return again.'' Use with caution.
-(@code{gnus-summary-delete-article}).
-
-@item B m
-@kindex B m (Summary)
-@cindex move mail
-@findex gnus-summary-move-article
-Move the article from one mail group to another
-(@code{gnus-summary-move-article}).
-
-@item B c
-@kindex B c (Summary)
-@cindex copy mail
-@findex gnus-summary-copy-article
-@c @icon{gnus-summary-mail-copy}
-Copy the article from one group (mail group or not) to a mail group
-(@code{gnus-summary-copy-article}).
-
-@item B B
-@kindex B B (Summary)
-@cindex crosspost mail
-@findex gnus-summary-crosspost-article
-Crosspost the current article to some other group
-(@code{gnus-summary-crosspost-article}). This will create a new copy of
-the article in the other group, and the Xref headers of the article will
-be properly updated.
-
-@item B i
-@kindex B i (Summary)
-@findex gnus-summary-import-article
-Import an arbitrary file into the current mail newsgroup
-(@code{gnus-summary-import-article}). You will be prompted for a file
-name, a @code{From} header and a @code{Subject} header.
-
-@item B r
-@kindex B r (Summary)
-@findex gnus-summary-respool-article
-Respool the mail article (@code{gnus-summary-respool-article}).
-@code{gnus-summary-respool-default-method} will be used as the default
-select method when respooling. This variable is @code{nil} by default,
-which means that the current group select method will be used instead.
-
-@item B w
-@itemx e
-@kindex B w (Summary)
-@kindex e (Summary)
-@findex gnus-summary-edit-article
-@kindex C-c C-c (Article)
-Edit the current article (@code{gnus-summary-edit-article}). To finish
-editing and make the changes permanent, type @kbd{C-c C-c}
-(@kbd{gnus-summary-edit-article-done}). If you give a prefix to the
-@kbd{C-c C-c} command, Gnus won't re-highlight the article.
-
-@item B q
-@kindex B q (Summary)
-@findex gnus-summary-respool-query
-If you want to re-spool an article, you might be curious as to what group
-the article will end up in before you do the re-spooling. This command
-will tell you (@code{gnus-summary-respool-query}).
-
-@item B t
-@kindex B t (Summary)
-@findex gnus-summary-respool-trace
-Similarly, this command will display all fancy splitting patterns used
-when repooling, if any (@code{gnus-summary-respool-trace}).
-
-@item B p
-@kindex B p (Summary)
-@findex gnus-summary-article-posted-p
-Some people have a tendency to send you "courtesy" copies when they
-follow up to articles you have posted. These usually have a
-@code{Newsgroups} header in them, but not always. This command
-(@code{gnus-summary-article-posted-p}) will try to fetch the current
-article from your news server (or rather, from
-@code{gnus-refer-article-method} or @code{gnus-select-method}) and will
-report back whether it found the article or not. Even if it says that
-it didn't find the article, it may have been posted anyway---mail
-propagation is much faster than news propagation, and the news copy may
-just not have arrived yet.
-
-@end table
-
-@vindex gnus-move-split-methods
-@cindex moving articles
-If you move (or copy) articles regularly, you might wish to have Gnus
-suggest where to put the articles. @code{gnus-move-split-methods} is a
-variable that uses the same syntax as @code{gnus-split-methods}
-(@pxref{Saving Articles}). You may customize that variable to create
-suggestions you find reasonable.
-
-@lisp
-(setq gnus-move-split-methods
- '(("^From:.*Lars Magne" "nnml:junk")
- ("^Subject:.*gnus" "nnfolder:important")
- (".*" "nnml:misc")))
-@end lisp
-
-
-@node Various Summary Stuff
-@section Various Summary Stuff
-
-@menu
-* Summary Group Information:: Information oriented commands.
-* Searching for Articles:: Multiple article commands.
-* Summary Generation Commands:: (Re)generating the summary buffer.
-* Really Various Summary Commands:: Those pesky non-conformant commands.
-@end menu
-
-@table @code
-@vindex gnus-summary-mode-hook
-@item gnus-summary-mode-hook
-This hook is called when creating a summary mode buffer.
-
-@vindex gnus-summary-generate-hook
-@item gnus-summary-generate-hook
-This is called as the last thing before doing the threading and the
-generation of the summary buffer. It's quite convenient for customizing
-the threading variables based on what data the newsgroup has. This hook
-is called from the summary buffer after most summary buffer variables
-have been set.
-
-@vindex gnus-summary-prepare-hook
-@item gnus-summary-prepare-hook
-It is called after the summary buffer has been generated. You might use
-it to, for instance, highlight lines or modify the look of the buffer in
-some other ungodly manner. I don't care.
-
-@vindex gnus-summary-prepared-hook
-@item gnus-summary-prepared-hook
-A hook called as the very last thing after the summary buffer has been
-generated.
-
-@vindex gnus-summary-ignore-duplicates
-@item gnus-summary-ignore-duplicates
-When Gnus discovers two articles that have the same @code{Message-ID},
-it has to do something drastic. No articles are allowed to have the
-same @code{Message-ID}, but this may happen when reading mail from some
-sources. Gnus allows you to customize what happens with this variable.
-If it is @code{nil} (which is the default), Gnus will rename the
-@code{Message-ID} (for display purposes only) and display the article as
-any other article. If this variable is @code{t}, it won't display the
-article---it'll be as if it never existed.
-
-@end table
-
-
-@node Summary Group Information
-@subsection Summary Group Information
-
-@table @kbd
-
-@item H f
-@kindex H f (Summary)
-@findex gnus-summary-fetch-faq
-@vindex gnus-group-faq-directory
-Try to fetch the FAQ (list of frequently asked questions) for the
-current group (@code{gnus-summary-fetch-faq}). Gnus will try to get the
-FAQ from @code{gnus-group-faq-directory}, which is usually a directory
-on a remote machine. This variable can also be a list of directories.
-In that case, giving a prefix to this command will allow you to choose
-between the various sites. @code{ange-ftp} or @code{efs} will probably
-be used for fetching the file.
-
-@item H d
-@kindex H d (Summary)
-@findex gnus-summary-describe-group
-Give a brief description of the current group
-(@code{gnus-summary-describe-group}). If given a prefix, force
-rereading the description from the server.
-
-@item H h
-@kindex H h (Summary)
-@findex gnus-summary-describe-briefly
-Give an extremely brief description of the most important summary
-keystrokes (@code{gnus-summary-describe-briefly}).
-
-@item H i
-@kindex H i (Summary)
-@findex gnus-info-find-node
-Go to the Gnus info node (@code{gnus-info-find-node}).
-@end table
-
-
-@node Searching for Articles
-@subsection Searching for Articles
-
-@table @kbd
-
-@item M-s
-@kindex M-s (Summary)
-@findex gnus-summary-search-article-forward
-Search through all subsequent articles for a regexp
-(@code{gnus-summary-search-article-forward}).
-
-@item M-r
-@kindex M-r (Summary)
-@findex gnus-summary-search-article-backward
-Search through all previous articles for a regexp
-(@code{gnus-summary-search-article-backward}).
-
-@item &
-@kindex & (Summary)
-@findex gnus-summary-execute-command
-This command will prompt you for a header field, a regular expression to
-match on this field, and a command to be executed if the match is made
-(@code{gnus-summary-execute-command}). If given a prefix, search
-backward instead.
-
-@item M-&
-@kindex M-& (Summary)
-@findex gnus-summary-universal-argument
-Perform any operation on all articles that have been marked with
-the process mark (@code{gnus-summary-universal-argument}).
-@end table
-
-@node Summary Generation Commands
-@subsection Summary Generation Commands
-
-@table @kbd
-
-@item Y g
-@kindex Y g (Summary)
-@findex gnus-summary-prepare
-Regenerate the current summary buffer (@code{gnus-summary-prepare}).
-
-@item Y c
-@kindex Y c (Summary)
-@findex gnus-summary-insert-cached-articles
-Pull all cached articles (for the current group) into the summary buffer
-(@code{gnus-summary-insert-cached-articles}).
-
-@end table
-
-
-@node Really Various Summary Commands
-@subsection Really Various Summary Commands
-
-@table @kbd
-
-@item C-d
-@kindex C-d (Summary)
-@findex gnus-summary-enter-digest-group
-If the current article is a collection of other articles (for instance,
-a digest), you might use this command to enter a group based on the that
-article (@code{gnus-summary-enter-digest-group}). Gnus will try to
-guess what article type is currently displayed unless you give a prefix
-to this command, which forces a ``digest'' interpretation. Basically,
-whenever you see a message that is a collection of other messages of
-some format, you @kbd{C-d} and read these messages in a more convenient
-fashion.
-
-@item M-C-d
-@kindex M-C-d (Summary)
-@findex gnus-summary-read-document
-This command is very similar to the one above, but lets you gather
-several documents into one biiig group
-(@code{gnus-summary-read-document}). It does this by opening several
-@code{nndoc} groups for each document, and then opening an
-@code{nnvirtual} group on top of these @code{nndoc} groups. This
-command understands the process/prefix convention
-(@pxref{Process/Prefix}).
-
-@item C-t
-@kindex C-t (Summary)
-@findex gnus-summary-toggle-truncation
-Toggle truncation of summary lines
-(@code{gnus-summary-toggle-truncation}). This will probably confuse the
-line centering function in the summary buffer, so it's not a good idea
-to have truncation switched off while reading articles.
-
-@item =
-@kindex = (Summary)
-@findex gnus-summary-expand-window
-Expand the summary buffer window (@code{gnus-summary-expand-window}).
-If given a prefix, force an @code{article} window configuration.
-
-@item M-C-e
-@kindex M-C-e (Summary)
-@findex gnus-summary-edit-parameters
-Edit the group parameters (@pxref{Group Parameters}) of the current
-group (@code{gnus-summary-edit-parameters}).
-
-@item M-C-g
-@kindex M-C-g (Summary)
-@findex gnus-summary-customize-parameters
-Customize the group parameters (@pxref{Group Parameters}) of the current
-group (@code{gnus-summary-customize-parameters}).
-
-@end table
-
-
-@node Exiting the Summary Buffer
-@section Exiting the Summary Buffer
-@cindex summary exit
-@cindex exiting groups
-
-Exiting from the summary buffer will normally update all info on the
-group and return you to the group buffer.
-
-@table @kbd
-
-@item Z Z
-@itemx q
-@kindex Z Z (Summary)
-@kindex q (Summary)
-@findex gnus-summary-exit
-@vindex gnus-summary-exit-hook
-@vindex gnus-summary-prepare-exit-hook
-@c @icon{gnus-summary-exit}
-Exit the current group and update all information on the group
-(@code{gnus-summary-exit}). @code{gnus-summary-prepare-exit-hook} is
-called before doing much of the exiting, which calls
-@code{gnus-summary-expire-articles} by default.
-@code{gnus-summary-exit-hook} is called after finishing the exit
-process. @code{gnus-group-no-more-groups-hook} is run when returning to
-group mode having no more (unread) groups.
-
-@item Z E
-@itemx Q
-@kindex Z E (Summary)
-@kindex Q (Summary)
-@findex gnus-summary-exit-no-update
-Exit the current group without updating any information on the group
-(@code{gnus-summary-exit-no-update}).
-
-@item Z c
-@itemx c
-@kindex Z c (Summary)
-@kindex c (Summary)
-@findex gnus-summary-catchup-and-exit
-@c @icon{gnus-summary-catchup-and-exit}
-Mark all unticked articles in the group as read and then exit
-(@code{gnus-summary-catchup-and-exit}).
-
-@item Z C
-@kindex Z C (Summary)
-@findex gnus-summary-catchup-all-and-exit
-Mark all articles, even the ticked ones, as read and then exit
-(@code{gnus-summary-catchup-all-and-exit}).
-
-@item Z n
-@kindex Z n (Summary)
-@findex gnus-summary-catchup-and-goto-next-group
-Mark all articles as read and go to the next group
-(@code{gnus-summary-catchup-and-goto-next-group}).
-
-@item Z R
-@kindex Z R (Summary)
-@findex gnus-summary-reselect-current-group
-Exit this group, and then enter it again
-(@code{gnus-summary-reselect-current-group}). If given a prefix, select
-all articles, both read and unread.
-
-@item Z G
-@itemx M-g
-@kindex Z G (Summary)
-@kindex M-g (Summary)
-@findex gnus-summary-rescan-group
-@c @icon{gnus-summary-mail-get}
-Exit the group, check for new articles in the group, and select the
-group (@code{gnus-summary-rescan-group}). If given a prefix, select all
-articles, both read and unread.
-
-@item Z N
-@kindex Z N (Summary)
-@findex gnus-summary-next-group
-Exit the group and go to the next group
-(@code{gnus-summary-next-group}).
-
-@item Z P
-@kindex Z P (Summary)
-@findex gnus-summary-prev-group
-Exit the group and go to the previous group
-(@code{gnus-summary-prev-group}).
-
-@item Z s
-@kindex Z s (Summary)
-@findex gnus-summary-save-newsrc
-Save the current number of read/marked articles in the dribble buffer
-and then save the dribble buffer (@code{gnus-summary-save-newsrc}). If
-given a prefix, also save the @file{.newsrc} file(s). Using this
-command will make exit without updating (the @kbd{Q} command) worthless.
-@end table
-
-@vindex gnus-exit-group-hook
-@code{gnus-exit-group-hook} is called when you exit the current
-group.
-
-@findex gnus-summary-wake-up-the-dead
-@findex gnus-dead-summary-mode
-@vindex gnus-kill-summary-on-exit
-If you're in the habit of exiting groups, and then changing your mind
-about it, you might set @code{gnus-kill-summary-on-exit} to @code{nil}.
-If you do that, Gnus won't kill the summary buffer when you exit it.
-(Quelle surprise!) Instead it will change the name of the buffer to
-something like @samp{*Dead Summary ... *} and install a minor mode
-called @code{gnus-dead-summary-mode}. Now, if you switch back to this
-buffer, you'll find that all keys are mapped to a function called
-@code{gnus-summary-wake-up-the-dead}. So tapping any keys in a dead
-summary buffer will result in a live, normal summary buffer.
-
-There will never be more than one dead summary buffer at any one time.
-
-@vindex gnus-use-cross-reference
-The data on the current group will be updated (which articles you have
-read, which articles you have replied to, etc.) when you exit the
-summary buffer. If the @code{gnus-use-cross-reference} variable is
-@code{t} (which is the default), articles that are cross-referenced to
-this group and are marked as read, will also be marked as read in the
-other subscribed groups they were cross-posted to. If this variable is
-neither @code{nil} nor @code{t}, the article will be marked as read in
-both subscribed and unsubscribed groups (@pxref{Crosspost Handling}).
-
-
-@node Crosspost Handling
-@section Crosspost Handling
-
-@cindex velveeta
-@cindex spamming
-Marking cross-posted articles as read ensures that you'll never have to
-read the same article more than once. Unless, of course, somebody has
-posted it to several groups separately. Posting the same article to
-several groups (not cross-posting) is called @dfn{spamming}, and you are
-by law required to send nasty-grams to anyone who perpetrates such a
-heinous crime. You may want to try NoCeM handling to filter out spam
-(@pxref{NoCeM}).
-
-Remember: Cross-posting is kinda ok, but posting the same article
-separately to several groups is not. Massive cross-posting (aka.
-@dfn{velveeta}) is to be avoided at all costs, and you can even use the
-@code{gnus-summary-mail-crosspost-complaint} command to complain about
-excessive crossposting (@pxref{Summary Mail Commands}).
-
-@cindex cross-posting
-@cindex Xref
-@cindex @sc{nov}
-One thing that may cause Gnus to not do the cross-posting thing
-correctly is if you use an @sc{nntp} server that supports @sc{xover}
-(which is very nice, because it speeds things up considerably) which
-does not include the @code{Xref} header in its @sc{nov} lines. This is
-Evil, but all too common, alas, alack. Gnus tries to Do The Right Thing
-even with @sc{xover} by registering the @code{Xref} lines of all
-articles you actually read, but if you kill the articles, or just mark
-them as read without reading them, Gnus will not get a chance to snoop
-the @code{Xref} lines out of these articles, and will be unable to use
-the cross reference mechanism.
-
-@cindex LIST overview.fmt
-@cindex overview.fmt
-To check whether your @sc{nntp} server includes the @code{Xref} header
-in its overview files, try @samp{telnet your.nntp.server nntp},
-@samp{MODE READER} on @code{inn} servers, and then say @samp{LIST
-overview.fmt}. This may not work, but if it does, and the last line you
-get does not read @samp{Xref:full}, then you should shout and whine at
-your news admin until she includes the @code{Xref} header in the
-overview files.
-
-@vindex gnus-nov-is-evil
-If you want Gnus to get the @code{Xref}s right all the time, you have to
-set @code{gnus-nov-is-evil} to @code{t}, which slows things down
-considerably.
-
-C'est la vie.
-
-For an alternative approach, @pxref{Duplicate Suppression}.
-
-
-@node Duplicate Suppression
-@section Duplicate Suppression
-
-By default, Gnus tries to make sure that you don't have to read the same
-article more than once by utilizing the crossposting mechanism
-(@pxref{Crosspost Handling}). However, that simple and efficient
-approach may not work satisfactory for some users for various
-reasons.
-
-@enumerate
-@item
-The @sc{nntp} server may fail to generate the @code{Xref} header. This
-is evil and not very common.
-
-@item
-The @sc{nntp} server may fail to include the @code{Xref} header in the
-@file{.overview} data bases. This is evil and all too common, alas.
-
-@item
-You may be reading the same group (or several related groups) from
-different @sc{nntp} servers.
-
-@item
-You may be getting mail that duplicates articles posted to groups.
-@end enumerate
-
-I'm sure there are other situations where @code{Xref} handling fails as
-well, but these four are the most common situations.
-
-If, and only if, @code{Xref} handling fails for you, then you may
-consider switching on @dfn{duplicate suppression}. If you do so, Gnus
-will remember the @code{Message-ID}s of all articles you have read or
-otherwise marked as read, and then, as if by magic, mark them as read
-all subsequent times you see them---in @emph{all} groups. Using this
-mechanism is quite likely to be somewhat inefficient, but not overly
-so. It's certainly preferable to reading the same articles more than
-once.
-
-Duplicate suppression is not a very subtle instrument. It's more like a
-sledge hammer than anything else. It works in a very simple
-fashion---if you have marked an article as read, it adds this Message-ID
-to a cache. The next time it sees this Message-ID, it will mark the
-article as read with the @samp{M} mark. It doesn't care what group it
-saw the article in.
-
-@table @code
-@item gnus-suppress-duplicates
-@vindex gnus-suppress-duplicates
-If non-@code{nil}, suppress duplicates.
-
-@item gnus-save-duplicate-list
-@vindex gnus-save-duplicate-list
-If non-@code{nil}, save the list of duplicates to a file. This will
-make startup and shutdown take longer, so the default is @code{nil}.
-However, this means that only duplicate articles read in a single Gnus
-session are suppressed.
-
-@item gnus-duplicate-list-length
-@vindex gnus-duplicate-list-length
-This variable says how many @code{Message-ID}s to keep in the duplicate
-suppression list. The default is 10000.
-
-@item gnus-duplicate-file
-@vindex gnus-duplicate-file
-The name of the file to store the duplicate suppression list in. The
-default is @file{~/News/suppression}.
-@end table
-
-If you have a tendency to stop and start Gnus often, setting
-@code{gnus-save-duplicate-list} to @code{t} is probably a good idea. If
-you leave Gnus running for weeks on end, you may have it @code{nil}. On
-the other hand, saving the list makes startup and shutdown much slower,
-so that means that if you stop and start Gnus often, you should set
-@code{gnus-save-duplicate-list} to @code{nil}. Uhm. I'll leave this up
-to you to figure out, I think.
-
-
-@node The Article Buffer
-@chapter The Article Buffer
-@cindex article buffer
-
-The articles are displayed in the article buffer, of which there is only
-one. All the summary buffers share the same article buffer unless you
-tell Gnus otherwise.
-
-@menu
-* Hiding Headers:: Deciding what headers should be displayed.
-* Using MIME:: Pushing articles through @sc{mime} before reading them.
-* Customizing Articles:: Tailoring the look of the articles.
-* Article Keymap:: Keystrokes available in the article buffer.
-* Misc Article:: Other stuff.
-@end menu
-
-
-@node Hiding Headers
-@section Hiding Headers
-@cindex hiding headers
-@cindex deleting headers
-
-The top section of each article is the @dfn{head}. (The rest is the
-@dfn{body}, but you may have guessed that already.)
-
-@vindex gnus-show-all-headers
-There is a lot of useful information in the head: the name of the person
-who wrote the article, the date it was written and the subject of the
-article. That's well and nice, but there's also lots of information
-most people do not want to see---what systems the article has passed
-through before reaching you, the @code{Message-ID}, the
-@code{References}, etc. ad nauseum---and you'll probably want to get rid
-of some of those lines. If you want to keep all those lines in the
-article buffer, you can set @code{gnus-show-all-headers} to @code{t}.
-
-Gnus provides you with two variables for sifting headers:
-
-@table @code
-
-@item gnus-visible-headers
-@vindex gnus-visible-headers
-If this variable is non-@code{nil}, it should be a regular expression
-that says what headers you wish to keep in the article buffer. All
-headers that do not match this variable will be hidden.
-
-For instance, if you only want to see the name of the person who wrote
-the article and the subject, you'd say:
-
-@lisp
-(setq gnus-visible-headers "^From:\\|^Subject:")
-@end lisp
-
-This variable can also be a list of regexps to match headers to
-remain visible.
-
-@item gnus-ignored-headers
-@vindex gnus-ignored-headers
-This variable is the reverse of @code{gnus-visible-headers}. If this
-variable is set (and @code{gnus-visible-headers} is @code{nil}), it
-should be a regular expression that matches all lines that you want to
-hide. All lines that do not match this variable will remain visible.
-
-For instance, if you just want to get rid of the @code{References} line
-and the @code{Xref} line, you might say:
-
-@lisp
-(setq gnus-ignored-headers "^References:\\|^Xref:")
-@end lisp
-
-This variable can also be a list of regexps to match headers to
-be removed.
-
-Note that if @code{gnus-visible-headers} is non-@code{nil}, this
-variable will have no effect.
-
-@end table
-
-@vindex gnus-sorted-header-list
-Gnus can also sort the headers for you. (It does this by default.) You
-can control the sorting by setting the @code{gnus-sorted-header-list}
-variable. It is a list of regular expressions that says in what order
-the headers are to be displayed.
-
-For instance, if you want the name of the author of the article first,
-and then the subject, you might say something like:
-
-@lisp
-(setq gnus-sorted-header-list '("^From:" "^Subject:"))
-@end lisp
-
-Any headers that are to remain visible, but are not listed in this
-variable, will be displayed in random order after all the headers listed in this variable.
-
-@findex gnus-article-hide-boring-headers
-@vindex gnus-article-display-hook
-@vindex gnus-boring-article-headers
-You can hide further boring headers by entering
-@code{gnus-article-hide-boring-headers} into
-@code{gnus-article-display-hook}. What this function does depends on
-the @code{gnus-boring-article-headers} variable. It's a list, but this
-list doesn't actually contain header names. Instead is lists various
-@dfn{boring conditions} that Gnus can check and remove from sight.
-
-These conditions are:
-@table @code
-@item empty
-Remove all empty headers.
-@item followup-to
-Remove the @code{Followup-To} header if it is identical to the
-@code{Newsgroups} header.
-@item reply-to
-Remove the @code{Reply-To} header if it lists the same address as the
-@code{From} header.
-@item newsgroups
-Remove the @code{Newsgroups} header if it only contains the current group
-name.
-@item date
-Remove the @code{Date} header if the article is less than three days
-old.
-@item long-to
-Remove the @code{To} header if it is very long.
-@item many-to
-Remove all @code{To} headers if there are more than one.
-@end table
-
-To include the four three elements, you could say something like;
-
-@lisp
-(setq gnus-boring-article-headers
- '(empty followup-to reply-to))
-@end lisp
-
-This is also the default value for this variable.
-
-
-@node Using MIME
-@section Using @sc{mime}
-@cindex @sc{mime}
-
-Mime is a standard for waving your hands through the air, aimlessly,
-while people stand around yawning.
-
-@sc{mime}, however, is a standard for encoding your articles, aimlessly,
-while all newsreaders die of fear.
-
-@sc{mime} may specify what character set the article uses, the encoding
-of the characters, and it also makes it possible to embed pictures and
-other naughty stuff in innocent-looking articles.
-
-@vindex gnus-display-mime-function
-@findex gnus-display-mime
-Gnus pushes @sc{mime} articles through @code{gnus-display-mime-function}
-to display the @sc{mime} parts. This is @code{gnus-display-mime} by
-default, which creates a bundle of clickable buttons that can be used to
-display, save and manipulate the @sc{mime} objects.
-
-The following commands are available when you have placed point over a
-@sc{mime} button:
-
-@table @kbd
-@findex gnus-article-press-button
-@item RET (Article)
-@itemx BUTTON-2 (Article)
-Toggle displaying of the @sc{mime} object
-(@code{gnus-article-press-button}).
-
-@findex gnus-mime-view-part
-@item M-RET (Article)
-@itemx v (Article)
-Prompt for a method, and then view the @sc{mime} object using this
-method (@code{gnus-mime-view-part}).
-
-@findex gnus-mime-save-part
-@item o (Article)
-Prompt for a file name, and then save the @sc{mime} object
-(@code{gnus-mime-save-part}).
-
-@findex gnus-mime-copy-part
-@item c (Article)
-Copy the @sc{mime} object to a fresh buffer and display this buffer
-(@code{gnus-mime-copy-part}).
-
-@findex gnus-mime-pipe-part
-@item | (Article)
-Output the @sc{mime} object to a process (@code{gnus-mime-pipe-part}).
-@end table
-
-Gnus will display some @sc{mime} objects automatically. The way Gnus
-determines which parts to do this with is described in the Emacs MIME
-manual.
-
-It might be best to just use the toggling functions from the article
-buffer to avoid getting nasty surprises. (For instance, you enter the
-group @samp{alt.sing-a-long} and, before you know it, @sc{mime} has
-decoded the sound file in the article and some horrible sing-a-long song
-comes screaming out your speakers, and you can't find the volume button,
-because there isn't one, and people are starting to look at you, and you
-try to stop the program, but you can't, and you can't find the program
-to control the volume, and everybody else in the room suddenly decides
-to look at you disdainfully, and you'll feel rather stupid.)
-
-Any similarity to real events and people is purely coincidental. Ahem.
-
-
-@node Customizing Articles
-@section Customizing Articles
-@cindex article customization
-
-@vindex gnus-article-display-hook
-The @code{gnus-article-display-hook} is called after the article has
-been inserted into the article buffer. It is meant to handle all
-treatment of the article before it is displayed.
-
-@findex gnus-article-maybe-highlight
-@findex gnus-article-maybe-hide-headers
-By default this hook just contains
-@code{gnus-article-maybe-hide-headers},
-@code{gnus-hide-boring-headers}, @code{gnus-article-treat-overstrike},
-and @code{gnus-article-maybe-highlight} (and under XEmacs,
-@code{gnus-article-display-x-face}), but there are thousands, nay
-millions, of functions you can put in this hook. For an overview of
-functions @pxref{Article Highlighting}, @pxref{Article Hiding},
-@pxref{Article Washing}, @pxref{Article Buttons} and @pxref{Article
-Date}. Note that the order of functions in this hook might affect
-things, so you may have to fiddle a bit to get the desired results.
-
-You can, of course, write your own functions. The functions are called
-from the article buffer, and you can do anything you like, pretty much.
-There is no information that you have to keep in the buffer---you can
-change everything. However, you shouldn't delete any headers. Instead
-make them invisible if you want to make them go away.
-
-
-@node Article Keymap
-@section Article Keymap
-
-Most of the keystrokes in the summary buffer can also be used in the
-article buffer. They should behave as if you typed them in the summary
-buffer, which means that you don't actually have to have a summary
-buffer displayed while reading. You can do it all from the article
-buffer.
-
-A few additional keystrokes are available:
-
-@table @kbd
-
-@item SPACE
-@kindex SPACE (Article)
-@findex gnus-article-next-page
-Scroll forwards one page (@code{gnus-article-next-page}).
-
-@item DEL
-@kindex DEL (Article)
-@findex gnus-article-prev-page
-Scroll backwards one page (@code{gnus-article-prev-page}).
-
-@item C-c ^
-@kindex C-c ^ (Article)
-@findex gnus-article-refer-article
-If point is in the neighborhood of a @code{Message-ID} and you press
-@kbd{C-c ^}, Gnus will try to get that article from the server
-(@code{gnus-article-refer-article}).
-
-@item C-c C-m
-@kindex C-c C-m (Article)
-@findex gnus-article-mail
-Send a reply to the address near point (@code{gnus-article-mail}). If
-given a prefix, include the mail.
-
-@item s
-@kindex s (Article)
-@findex gnus-article-show-summary
-Reconfigure the buffers so that the summary buffer becomes visible
-(@code{gnus-article-show-summary}).
-
-@item ?
-@kindex ? (Article)
-@findex gnus-article-describe-briefly
-Give a very brief description of the available keystrokes
-(@code{gnus-article-describe-briefly}).
-
-@item TAB
-@kindex TAB (Article)
-@findex gnus-article-next-button
-Go to the next button, if any (@code{gnus-article-next-button}). This
-only makes sense if you have buttonizing turned on.
-
-@item M-TAB
-@kindex M-TAB (Article)
-@findex gnus-article-prev-button
-Go to the previous button, if any (@code{gnus-article-prev-button}).
-
-@end table
-
-
-@node Misc Article
-@section Misc Article
-
-@table @code
-
-@item gnus-single-article-buffer
-@vindex gnus-single-article-buffer
-If non-@code{nil}, use the same article buffer for all the groups.
-(This is the default.) If @code{nil}, each group will have its own
-article buffer.
-
-@vindex gnus-article-decode-hook
-@item gnus-article-decode-hook
-@cindex MIME
-Hook used to decode @sc{mime} articles. The default value is
-@code{(article-decode-charset article-decode-encoded-words)}
-
-@vindex gnus-article-prepare-hook
-@item gnus-article-prepare-hook
-This hook is called right after the article has been inserted into the
-article buffer. It is mainly intended for functions that do something
-depending on the contents; it should probably not be used for changing
-the contents of the article buffer.
-
-@vindex gnus-article-display-hook
-@item gnus-article-display-hook
-This hook is called as the last thing when displaying an article, and is
-intended for modifying the contents of the buffer, doing highlights,
-hiding headers, and the like.
-
-@item gnus-article-mode-hook
-@vindex gnus-article-mode-hook
-Hook called in article mode buffers.
-
-@item gnus-article-mode-syntax-table
-@vindex gnus-article-mode-syntax-table
-Syntax table used in article buffers. It is initialized from
-@code{text-mode-syntax-table}.
-
-@vindex gnus-article-mode-line-format
-@item gnus-article-mode-line-format
-This variable is a format string along the same lines as
-@code{gnus-summary-mode-line-format} (@pxref{Mode Line Formatting}). It
-accepts the same format specifications as that variable, with one
-extension:
-
-@table @samp
-@item w
-The @dfn{wash status} of the article. This is a short string with one
-character for each possible article wash operation that may have been
-performed.
-@item m
-The number of @sc{mime} parts in the article.
-@end table
-
-@vindex gnus-break-pages
-
-@item gnus-break-pages
-Controls whether @dfn{page breaking} is to take place. If this variable
-is non-@code{nil}, the articles will be divided into pages whenever a
-page delimiter appears in the article. If this variable is @code{nil},
-paging will not be done.
-
-@item gnus-page-delimiter
-@vindex gnus-page-delimiter
-This is the delimiter mentioned above. By default, it is @samp{^L}
-(formfeed).
-@end table
-
-
-@node Composing Messages
-@chapter Composing Messages
-@cindex composing messages
-@cindex messages
-@cindex mail
-@cindex sending mail
-@cindex reply
-@cindex followup
-@cindex post
-
-@kindex C-c C-c (Post)
-All commands for posting and mailing will put you in a message buffer
-where you can edit the article all you like, before you send the article
-by pressing @kbd{C-c C-c}. @xref{Top, , Top, message, The Message
-Manual}. If you are in a foreign news group, and you wish to post the
-article using the foreign server, you can give a prefix to @kbd{C-c C-c}
-to make Gnus try to post using the foreign server.
-
-@menu
-* Mail:: Mailing and replying.
-* Post:: Posting and following up.
-* Posting Server:: What server should you post via?
-* Mail and Post:: Mailing and posting at the same time.
-* Archived Messages:: Where Gnus stores the messages you've sent.
-* Posting Styles:: An easier way to specify who you are.
-* Drafts:: Postponing messages and rejected messages.
-* Rejected Articles:: What happens if the server doesn't like your article?
-@end menu
-
-Also see @pxref{Canceling and Superseding} for information on how to
-remove articles you shouldn't have posted.
-
-
-@node Mail
-@section Mail
-
-Variables for customizing outgoing mail:
-
-@table @code
-@item gnus-uu-digest-headers
-@vindex gnus-uu-digest-headers
-List of regexps to match headers included in digested messages. The
-headers will be included in the sequence they are matched.
-
-@item gnus-add-to-list
-@vindex gnus-add-to-list
-If non-@code{nil}, add a @code{to-list} group parameter to mail groups
-that have none when you do a @kbd{a}.
-
-@end table
-
-
-@node Post
-@section Post
-
-Variables for composing news articles:
-
-@table @code
-@item gnus-sent-message-ids-file
-@vindex gnus-sent-message-ids-file
-Gnus will keep a @code{Message-ID} history file of all the mails it has
-sent. If it discovers that it has already sent a mail, it will ask the
-user whether to re-send the mail. (This is primarily useful when
-dealing with @sc{soup} packets and the like where one is apt to send the
-same packet multiple times.) This variable says what the name of this
-history file is. It is @file{~/News/Sent-Message-IDs} by default. Set
-this variable to @code{nil} if you don't want Gnus to keep a history
-file.
-
-@item gnus-sent-message-ids-length
-@vindex gnus-sent-message-ids-length
-This variable says how many @code{Message-ID}s to keep in the history
-file. It is 1000 by default.
-
-@end table
-
-
-@node Posting Server
-@section Posting Server
-
-When you press those magical @kbd{C-c C-c} keys to ship off your latest
-(extremely intelligent, of course) article, where does it go?
-
-Thank you for asking. I hate you.
-
-@vindex gnus-post-method
-
-It can be quite complicated. Normally, Gnus will use the same native
-server. However. If your native server doesn't allow posting, just
-reading, you probably want to use some other server to post your
-(extremely intelligent and fabulously interesting) articles. You can
-then set the @code{gnus-post-method} to some other method:
-
-@lisp
-(setq gnus-post-method '(nnspool ""))
-@end lisp
-
-Now, if you've done this, and then this server rejects your article, or
-this server is down, what do you do then? To override this variable you
-can use a non-zero prefix to the @kbd{C-c C-c} command to force using
-the ``current'' server for posting.
-
-If you give a zero prefix (i.e., @kbd{C-u 0 C-c C-c}) to that command,
-Gnus will prompt you for what method to use for posting.
-
-You can also set @code{gnus-post-method} to a list of select methods.
-If that's the case, Gnus will always prompt you for what method to use
-for posting.
-
-Finally, if you want to always post using the same select method as
-you're reading from (which might be convenient if you're reading lots of
-groups from different private servers), you can set this variable to
-@code{current}.
-
-
-@node Mail and Post
-@section Mail and Post
-
-Here's a list of variables relevant to both mailing and
-posting:
-
-@table @code
-@item gnus-mailing-list-groups
-@findex gnus-mailing-list-groups
-@cindex mailing lists
-
-If your news server offers groups that are really mailing lists
-gatewayed to the @sc{nntp} server, you can read those groups without
-problems, but you can't post/followup to them without some difficulty.
-One solution is to add a @code{to-address} to the group parameters
-(@pxref{Group Parameters}). An easier thing to do is set the
-@code{gnus-mailing-list-groups} to a regexp that matches the groups that
-really are mailing lists. Then, at least, followups to the mailing
-lists will work most of the time. Posting to these groups (@kbd{a}) is
-still a pain, though.
-
-@end table
-
-You may want to do spell-checking on messages that you send out. Or, if
-you don't want to spell-check by hand, you could add automatic
-spell-checking via the @code{ispell} package:
-
-@cindex ispell
-@findex ispell-message
-@lisp
-(add-hook 'message-send-hook 'ispell-message)
-@end lisp
-
-
-@node Archived Messages
-@section Archived Messages
-@cindex archived messages
-@cindex sent messages
-
-Gnus provides a few different methods for storing the mail and news you
-send. The default method is to use the @dfn{archive virtual server} to
-store the messages. If you want to disable this completely, the
-@code{gnus-message-archive-group} variable should be @code{nil}, which
-is the default.
-
-@vindex gnus-message-archive-method
-@code{gnus-message-archive-method} says what virtual server Gnus is to
-use to store sent messages. The default is:
-
-@lisp
-(nnfolder "archive"
- (nnfolder-directory "~/Mail/archive")
- (nnfolder-active-file "~/Mail/archive/active")
- (nnfolder-get-new-mail nil)
- (nnfolder-inhibit-expiry t))
-@end lisp
-
-You can, however, use any mail select method (@code{nnml},
-@code{nnmbox}, etc.). @code{nnfolder} is a quite likeable select method
-for doing this sort of thing, though. If you don't like the default
-directory chosen, you could say something like:
-
-@lisp
-(setq gnus-message-archive-method
- '(nnfolder "archive"
- (nnfolder-inhibit-expiry t)
- (nnfolder-active-file "~/News/sent-mail/active")
- (nnfolder-directory "~/News/sent-mail/")))
-@end lisp
-
-@vindex gnus-message-archive-group
-@cindex Gcc
-Gnus will insert @code{Gcc} headers in all outgoing messages that point
-to one or more group(s) on that server. Which group to use is
-determined by the @code{gnus-message-archive-group} variable.
-
-This variable can be used to do the following:
-
-@itemize @bullet
-@item a string
-Messages will be saved in that group.
-@item a list of strings
-Messages will be saved in all those groups.
-@item an alist of regexps, functions and forms
-When a key ``matches'', the result is used.
-@item @code{nil}
-No message archiving will take place. This is the default.
-@end itemize
-
-Let's illustrate:
-
-Just saving to a single group called @samp{MisK}:
-@lisp
-(setq gnus-message-archive-group "MisK")
-@end lisp
-
-Saving to two groups, @samp{MisK} and @samp{safe}:
-@lisp
-(setq gnus-message-archive-group '("MisK" "safe"))
-@end lisp
-
-Save to different groups based on what group you are in:
-@lisp
-(setq gnus-message-archive-group
- '(("^alt" "sent-to-alt")
- ("mail" "sent-to-mail")
- (".*" "sent-to-misc")))
-@end lisp
-
-More complex stuff:
-@lisp
-(setq gnus-message-archive-group
- '((if (message-news-p)
- "misc-news"
- "misc-mail")))
-@end lisp
-
-How about storing all news messages in one file, but storing all mail
-messages in one file per month:
-
-@lisp
-(setq gnus-message-archive-group
- '((if (message-news-p)
- "misc-news"
- (concat "mail." (format-time-string
- "%Y-%m" (current-time))))))
-@end lisp
-
-(XEmacs 19.13 doesn't have @code{format-time-string}, so you'll have to
-use a different value for @code{gnus-message-archive-group} there.)
-
-Now, when you send a message off, it will be stored in the appropriate
-group. (If you want to disable storing for just one particular message,
-you can just remove the @code{Gcc} header that has been inserted.) The
-archive group will appear in the group buffer the next time you start
-Gnus, or the next time you press @kbd{F} in the group buffer. You can
-enter it and read the articles in it just like you'd read any other
-group. If the group gets really big and annoying, you can simply rename
-if (using @kbd{G r} in the group buffer) to something
-nice---@samp{misc-mail-september-1995}, or whatever. New messages will
-continue to be stored in the old (now empty) group.
-
-That's the default method of archiving sent messages. Gnus offers a
-different way for the people who don't like the default method. In that
-case you should set @code{gnus-message-archive-group} to @code{nil};
-this will disable archiving.
-
-@table @code
-@item gnus-outgoing-message-group
-@vindex gnus-outgoing-message-group
-All outgoing messages will be put in this group. If you want to store
-all your outgoing mail and articles in the group @samp{nnml:archive},
-you set this variable to that value. This variable can also be a list of
-group names.
-
-If you want to have greater control over what group to put each
-message in, you can set this variable to a function that checks the
-current newsgroup name and then returns a suitable group name (or list
-of names).
-
-This variable can be used instead of @code{gnus-message-archive-group},
-but the latter is the preferred method.
-@end table
-
-
-@node Posting Styles
-@section Posting Styles
-@cindex posting styles
-@cindex styles
-
-All them variables, they make my head swim.
-
-So what if you want a different @code{Organization} and signature based
-on what groups you post to? And you post both from your home machine
-and your work machine, and you want different @code{From} lines, and so
-on?
-
-@vindex gnus-posting-styles
-One way to do stuff like that is to write clever hooks that change the
-variables you need to have changed. That's a bit boring, so somebody
-came up with the bright idea of letting the user specify these things in
-a handy alist. Here's an example of a @code{gnus-posting-styles}
-variable:
-
-@lisp
-((".*"
- (signature "Peace and happiness")
- (organization "What me?"))
- ("^comp"
- (signature "Death to everybody"))
- ("comp.emacs.i-love-it"
- (organization "Emacs is it")))
-@end lisp
-
-As you might surmise from this example, this alist consists of several
-@dfn{styles}. Each style will be applicable if the first element
-``matches'', in some form or other. The entire alist will be iterated
-over, from the beginning towards the end, and each match will be
-applied, which means that attributes in later styles that match override
-the same attributes in earlier matching styles. So
-@samp{comp.programming.literate} will have the @samp{Death to everybody}
-signature and the @samp{What me?} @code{Organization} header.
-
-The first element in each style is called the @code{match}. If it's a
-string, then Gnus will try to regexp match it against the group name.
-If it's a function symbol, that function will be called with no
-arguments. If it's a variable symbol, then the variable will be
-referenced. If it's a list, then that list will be @code{eval}ed. In
-any case, if this returns a non-@code{nil} value, then the style is said
-to @dfn{match}.
-
-Each style may contain a arbitrary amount of @dfn{attributes}. Each
-attribute consists of a @var{(name . value)} pair. The attribute name
-can be one of @code{signature}, @code{signature-file},
-@code{organization}, @code{address}, @code{name} or @code{body}. The
-attribute name can also be a string. In that case, this will be used as
-a header name, and the value will be inserted in the headers of the
-article.
-
-The attribute value can be a string (used verbatim), a function (the
-return value will be used), a variable (its value will be used) or a
-list (it will be @code{eval}ed and the return value will be used).
-
-If you wish to check whether the message you are about to compose is
-meant to be a news article or a mail message, you can check the values
-of the two dynamically bound variables @code{message-this-is-news} and
-@code{message-this-is-mail}.
-
-@vindex message-this-is-mail
-@vindex message-this-is-news
-
-So here's a new example:
-
-@lisp
-(setq gnus-posting-styles
- '((".*"
- (signature-file "~/.signature")
- (name "User Name")
- ("X-Home-Page" (getenv "WWW_HOME"))
- (organization "People's Front Against MWM"))
- ("^rec.humor"
- (signature my-funny-signature-randomizer))
- ((equal (system-name) "gnarly")
- (signature my-quote-randomizer))
- (message-this-is-news
- (signature my-news-signature))
- (posting-from-work-p
- (signature-file "~/.work-signature")
- (address "user@@bar.foo")
- (body "You are fired.\n\nSincerely, your boss.")
- (organization "Important Work, Inc"))
- ("^nn.+:"
- (signature-file "~/.mail-signature"))))
-@end lisp
-
-
-@node Drafts
-@section Drafts
-@cindex drafts
-
-If you are writing a message (mail or news) and suddenly remember that
-you have a steak in the oven (or some pesto in the food processor, you
-craaazy vegetarians), you'll probably wish there was a method to save
-the message you are writing so that you can continue editing it some
-other day, and send it when you feel its finished.
-
-Well, don't worry about it. Whenever you start composing a message of
-some sort using the Gnus mail and post commands, the buffer you get will
-automatically associate to an article in a special @dfn{draft} group.
-If you save the buffer the normal way (@kbd{C-x C-s}, for instance), the
-article will be saved there. (Auto-save files also go to the draft
-group.)
-
-@cindex nndraft
-@vindex nndraft-directory
-The draft group is a special group (which is implemented as an
-@code{nndraft} group, if you absolutely have to know) called
-@samp{nndraft:drafts}. The variable @code{nndraft-directory} says where
-@code{nndraft} is to store its files. What makes this group special is
-that you can't tick any articles in it or mark any articles as
-read---all articles in the group are permanently unread.
-
-If the group doesn't exist, it will be created and you'll be subscribed
-to it. The only way to make it disappear from the Group buffer is to
-unsubscribe it.
-
-@c @findex gnus-dissociate-buffer-from-draft
-@c @kindex C-c M-d (Mail)
-@c @kindex C-c M-d (Post)
-@c @findex gnus-associate-buffer-with-draft
-@c @kindex C-c C-d (Mail)
-@c @kindex C-c C-d (Post)
-@c If you're writing some super-secret message that you later want to
-@c encode with PGP before sending, you may wish to turn the auto-saving
-@c (and association with the draft group) off. You never know who might be
-@c interested in reading all your extremely valuable and terribly horrible
-@c and interesting secrets. The @kbd{C-c M-d}
-@c (@code{gnus-dissociate-buffer-from-draft}) command does that for you.
-@c If you change your mind and want to turn the auto-saving back on again,
-@c @kbd{C-c C-d} (@code{gnus-associate-buffer-with-draft} does that.
-@c
-@c @vindex gnus-use-draft
-@c To leave association with the draft group off by default, set
-@c @code{gnus-use-draft} to @code{nil}. It is @code{t} by default.
-
-@findex gnus-draft-edit-message
-@kindex D e (Draft)
-When you want to continue editing the article, you simply enter the
-draft group and push @kbd{D e} (@code{gnus-draft-edit-message}) to do
-that. You will be placed in a buffer where you left off.
-
-Rejected articles will also be put in this draft group (@pxref{Rejected
-Articles}).
-
-@findex gnus-draft-send-all-messages
-@findex gnus-draft-send-message
-If you have lots of rejected messages you want to post (or mail) without
-doing further editing, you can use the @kbd{D s} command
-(@code{gnus-draft-send-message}). This command understands the
-process/prefix convention (@pxref{Process/Prefix}). The @kbd{D S}
-command (@code{gnus-draft-send-all-messages}) will ship off all messages
-in the buffer.
-
-If you have some messages that you wish not to send, you can use the
-@kbd{D t} (@code{gnus-draft-toggle-sending}) command to mark the message
-as unsendable. This is a toggling command.
-
-
-@node Rejected Articles
-@section Rejected Articles
-@cindex rejected articles
-
-Sometimes a news server will reject an article. Perhaps the server
-doesn't like your face. Perhaps it just feels miserable. Perhaps
-@emph{there be demons}. Perhaps you have included too much cited text.
-Perhaps the disk is full. Perhaps the server is down.
-
-These situations are, of course, totally beyond the control of Gnus.
-(Gnus, of course, loves the way you look, always feels great, has angels
-fluttering around inside of it, doesn't care about how much cited text
-you include, never runs full and never goes down.) So Gnus saves these
-articles until some later time when the server feels better.
-
-The rejected articles will automatically be put in a special draft group
-(@pxref{Drafts}). When the server comes back up again, you'd then
-typically enter that group and send all the articles off.
-
-
-@node Select Methods
-@chapter Select Methods
-@cindex foreign groups
-@cindex select methods
-
-A @dfn{foreign group} is a group not read by the usual (or
-default) means. It could be, for instance, a group from a different
-@sc{nntp} server, it could be a virtual group, or it could be your own
-personal mail group.
-
-A foreign group (or any group, really) is specified by a @dfn{name} and
-a @dfn{select method}. To take the latter first, a select method is a
-list where the first element says what backend to use (e.g. @code{nntp},
-@code{nnspool}, @code{nnml}) and the second element is the @dfn{server
-name}. There may be additional elements in the select method, where the
-value may have special meaning for the backend in question.
-
-One could say that a select method defines a @dfn{virtual server}---so
-we do just that (@pxref{The Server Buffer}).
-
-The @dfn{name} of the group is the name the backend will recognize the
-group as.
-
-For instance, the group @samp{soc.motss} on the @sc{nntp} server
-@samp{some.where.edu} will have the name @samp{soc.motss} and select
-method @code{(nntp "some.where.edu")}. Gnus will call this group
-@samp{nntp+some.where.edu:soc.motss}, even though the @code{nntp}
-backend just knows this group as @samp{soc.motss}.
-
-The different methods all have their peculiarities, of course.
-
-@menu
-* The Server Buffer:: Making and editing virtual servers.
-* Getting News:: Reading USENET news with Gnus.
-* Getting Mail:: Reading your personal mail with Gnus.
-* Other Sources:: Reading directories, files, SOUP packets.
-* Combined Groups:: Combining groups into one group.
-* Gnus Unplugged:: Reading news and mail offline.
-@end menu
-
-
-@node The Server Buffer
-@section The Server Buffer
-
-Traditionally, a @dfn{server} is a machine or a piece of software that
-one connects to, and then requests information from. Gnus does not
-connect directly to any real servers, but does all transactions through
-one backend or other. But that's just putting one layer more between
-the actual media and Gnus, so we might just as well say that each
-backend represents a virtual server.
-
-For instance, the @code{nntp} backend may be used to connect to several
-different actual @sc{nntp} servers, or, perhaps, to many different ports
-on the same actual @sc{nntp} server. You tell Gnus which backend to
-use, and what parameters to set by specifying a @dfn{select method}.
-
-These select method specifications can sometimes become quite
-complicated---say, for instance, that you want to read from the
-@sc{nntp} server @samp{news.funet.fi} on port number 13, which
-hangs if queried for @sc{nov} headers and has a buggy select. Ahem.
-Anyways, if you had to specify that for each group that used this
-server, that would be too much work, so Gnus offers a way of naming
-select methods, which is what you do in the server buffer.
-
-To enter the server buffer, use the @kbd{^}
-(@code{gnus-group-enter-server-mode}) command in the group buffer.
-
-@menu
-* Server Buffer Format:: You can customize the look of this buffer.
-* Server Commands:: Commands to manipulate servers.
-* Example Methods:: Examples server specifications.
-* Creating a Virtual Server:: An example session.
-* Server Variables:: Which variables to set.
-* Servers and Methods:: You can use server names as select methods.
-* Unavailable Servers:: Some servers you try to contact may be down.
-@end menu
-
-@vindex gnus-server-mode-hook
-@code{gnus-server-mode-hook} is run when creating the server buffer.
-
-
-@node Server Buffer Format
-@subsection Server Buffer Format
-@cindex server buffer format
-
-@vindex gnus-server-line-format
-You can change the look of the server buffer lines by changing the
-@code{gnus-server-line-format} variable. This is a @code{format}-like
-variable, with some simple extensions:
-
-@table @samp
-
-@item h
-How the news is fetched---the backend name.
-
-@item n
-The name of this server.
-
-@item w
-Where the news is to be fetched from---the address.
-
-@item s
-The opened/closed/denied status of the server.
-@end table
-
-@vindex gnus-server-mode-line-format
-The mode line can also be customized by using the
-@code{gnus-server-mode-line-format} variable (@pxref{Mode Line
-Formatting}). The following specs are understood:
-
-@table @samp
-@item S
-Server name.
-
-@item M
-Server method.
-@end table
-
-Also @pxref{Formatting Variables}.
-
-
-@node Server Commands
-@subsection Server Commands
-@cindex server commands
-
-@table @kbd
-
-@item a
-@kindex a (Server)
-@findex gnus-server-add-server
-Add a new server (@code{gnus-server-add-server}).
-
-@item e
-@kindex e (Server)
-@findex gnus-server-edit-server
-Edit a server (@code{gnus-server-edit-server}).
-
-@item SPACE
-@kindex SPACE (Server)
-@findex gnus-server-read-server
-Browse the current server (@code{gnus-server-read-server}).
-
-@item q
-@kindex q (Server)
-@findex gnus-server-exit
-Return to the group buffer (@code{gnus-server-exit}).
-
-@item k
-@kindex k (Server)
-@findex gnus-server-kill-server
-Kill the current server (@code{gnus-server-kill-server}).
-
-@item y
-@kindex y (Server)
-@findex gnus-server-yank-server
-Yank the previously killed server (@code{gnus-server-yank-server}).
-
-@item c
-@kindex c (Server)
-@findex gnus-server-copy-server
-Copy the current server (@code{gnus-server-copy-server}).
-
-@item l
-@kindex l (Server)
-@findex gnus-server-list-servers
-List all servers (@code{gnus-server-list-servers}).
-
-@item s
-@kindex s (Server)
-@findex gnus-server-scan-server
-Request that the server scan its sources for new articles
-(@code{gnus-server-scan-server}). This is mainly sensible with mail
-servers.
-
-@item g
-@kindex g (Server)
-@findex gnus-server-regenerate-server
-Request that the server regenerate all its data structures
-(@code{gnus-server-regenerate-server}). This can be useful if you have
-a mail backend that has gotten out of synch.
-
-@end table
-
-
-@node Example Methods
-@subsection Example Methods
-
-Most select methods are pretty simple and self-explanatory:
-
-@lisp
-(nntp "news.funet.fi")
-@end lisp
-
-Reading directly from the spool is even simpler:
-
-@lisp
-(nnspool "")
-@end lisp
-
-As you can see, the first element in a select method is the name of the
-backend, and the second is the @dfn{address}, or @dfn{name}, if you
-will.
-
-After these two elements, there may be an arbitrary number of
-@var{(variable form)} pairs.
-
-To go back to the first example---imagine that you want to read from
-port 15 on that machine. This is what the select method should
-look like then:
-
-@lisp
-(nntp "news.funet.fi" (nntp-port-number 15))
-@end lisp
-
-You should read the documentation to each backend to find out what
-variables are relevant, but here's an @code{nnmh} example:
-
-@code{nnmh} is a mail backend that reads a spool-like structure. Say
-you have two structures that you wish to access: One is your private
-mail spool, and the other is a public one. Here's the possible spec for
-your private mail:
-
-@lisp
-(nnmh "private" (nnmh-directory "~/private/mail/"))
-@end lisp
-
-(This server is then called @samp{private}, but you may have guessed
-that.)
-
-Here's the method for a public spool:
-
-@lisp
-(nnmh "public"
- (nnmh-directory "/usr/information/spool/")
- (nnmh-get-new-mail nil))
-@end lisp
-
-If you are behind a firewall and only have access to the @sc{nntp}
-server from the firewall machine, you can instruct Gnus to @code{rlogin}
-on the firewall machine and telnet from there to the @sc{nntp} server.
-Doing this can be rather fiddly, but your virtual server definition
-should probably look something like this:
-
-@lisp
-(nntp "firewall"
- (nntp-address "the.firewall.machine")
- (nntp-open-connection-function nntp-open-rlogin)
- (nntp-end-of-line "\n")
- (nntp-rlogin-parameters
- ("telnet" "the.real.nntp.host" "nntp")))
-@end lisp
-
-If you want to use the wonderful @code{ssh} program to provide a
-compressed connection over the modem line, you could create a virtual
-server that would look something like this:
-
-@lisp
-(nntp "news"
- (nntp-address "copper.uio.no")
- (nntp-rlogin-program "ssh")
- (nntp-open-connection-function nntp-open-rlogin)
- (nntp-end-of-line "\n")
- (nntp-rlogin-parameters
- ("telnet" "news.uio.no" "nntp")))
-@end lisp
-
-This means that you have to have set up @code{ssh-agent} correctly to
-provide automatic authorization, of course. And to get a compressed
-connection, you have to have the @samp{Compression} option in the
-@code{ssh} @file{config} file.
-
-
-@node Creating a Virtual Server
-@subsection Creating a Virtual Server
-
-If you're saving lots of articles in the cache by using persistent
-articles, you may want to create a virtual server to read the cache.
-
-First you need to add a new server. The @kbd{a} command does that. It
-would probably be best to use @code{nnspool} to read the cache. You
-could also use @code{nnml} or @code{nnmh}, though.
-
-Type @kbd{a nnspool RET cache RET}.
-
-You should now have a brand new @code{nnspool} virtual server called
-@samp{cache}. You now need to edit it to have the right definitions.
-Type @kbd{e} to edit the server. You'll be entered into a buffer that
-will contain the following:
-
-@lisp
-(nnspool "cache")
-@end lisp
-
-Change that to:
-
-@lisp
-(nnspool "cache"
- (nnspool-spool-directory "~/News/cache/")
- (nnspool-nov-directory "~/News/cache/")
- (nnspool-active-file "~/News/cache/active"))
-@end lisp
-
-Type @kbd{C-c C-c} to return to the server buffer. If you now press
-@kbd{RET} over this virtual server, you should be entered into a browse
-buffer, and you should be able to enter any of the groups displayed.
-
-
-@node Server Variables
-@subsection Server Variables
-
-One sticky point when defining variables (both on backends and in Emacs
-in general) is that some variables are typically initialized from other
-variables when the definition of the variables is being loaded. If you
-change the "base" variable after the variables have been loaded, you
-won't change the "derived" variables.
-
-This typically affects directory and file variables. For instance,
-@code{nnml-directory} is @file{~/Mail/} by default, and all @code{nnml}
-directory variables are initialized from that variable, so
-@code{nnml-active-file} will be @file{~/Mail/active}. If you define a
-new virtual @code{nnml} server, it will @emph{not} suffice to set just
-@code{nnml-directory}---you have to explicitly set all the file
-variables to be what you want them to be. For a complete list of
-variables for each backend, see each backend's section later in this
-manual, but here's an example @code{nnml} definition:
-
-@lisp
-(nnml "public"
- (nnml-directory "~/my-mail/")
- (nnml-active-file "~/my-mail/active")
- (nnml-newsgroups-file "~/my-mail/newsgroups"))
-@end lisp
-
-
-@node Servers and Methods
-@subsection Servers and Methods
-
-Wherever you would normally use a select method
-(e.g. @code{gnus-secondary-select-method}, in the group select method,
-when browsing a foreign server) you can use a virtual server name
-instead. This could potentially save lots of typing. And it's nice all
-over.
-
-
-@node Unavailable Servers
-@subsection Unavailable Servers
-
-If a server seems to be unreachable, Gnus will mark that server as
-@code{denied}. That means that any subsequent attempt to make contact
-with that server will just be ignored. ``It can't be opened,'' Gnus
-will tell you, without making the least effort to see whether that is
-actually the case or not.
-
-That might seem quite naughty, but it does make sense most of the time.
-Let's say you have 10 groups subscribed to on server
-@samp{nephelococcygia.com}. This server is located somewhere quite far
-away from you and the machine is quite slow, so it takes 1 minute just
-to find out that it refuses connection to you today. If Gnus were to
-attempt to do that 10 times, you'd be quite annoyed, so Gnus won't
-attempt to do that. Once it has gotten a single ``connection refused'',
-it will regard that server as ``down''.
-
-So, what happens if the machine was only feeling unwell temporarily?
-How do you test to see whether the machine has come up again?
-
-You jump to the server buffer (@pxref{The Server Buffer}) and poke it
-with the following commands:
-
-@table @kbd
-
-@item O
-@kindex O (Server)
-@findex gnus-server-open-server
-Try to establish connection to the server on the current line
-(@code{gnus-server-open-server}).
-
-@item C
-@kindex C (Server)
-@findex gnus-server-close-server
-Close the connection (if any) to the server
-(@code{gnus-server-close-server}).
-
-@item D
-@kindex D (Server)
-@findex gnus-server-deny-server
-Mark the current server as unreachable
-(@code{gnus-server-deny-server}).
-
-@item M-o
-@kindex M-o (Server)
-@findex gnus-server-open-all-servers
-Open the connections to all servers in the buffer
-(@code{gnus-server-open-all-servers}).
-
-@item M-c
-@kindex M-c (Server)
-@findex gnus-server-close-all-servers
-Close the connections to all servers in the buffer
-(@code{gnus-server-close-all-servers}).
-
-@item R
-@kindex R (Server)
-@findex gnus-server-remove-denials
-Remove all marks to whether Gnus was denied connection from any servers
-(@code{gnus-server-remove-denials}).
-
-@end table
-
-
-@node Getting News
-@section Getting News
-@cindex reading news
-@cindex news backends
-
-A newsreader is normally used for reading news. Gnus currently provides
-only two methods of getting news---it can read from an @sc{nntp} server,
-or it can read from a local spool.
-
-@menu
-* NNTP:: Reading news from an @sc{nntp} server.
-* News Spool:: Reading news from the local spool.
-@end menu
-
-
-@node NNTP
-@subsection @sc{nntp}
-@cindex nntp
-
-Subscribing to a foreign group from an @sc{nntp} server is rather easy.
-You just specify @code{nntp} as method and the address of the @sc{nntp}
-server as the, uhm, address.
-
-If the @sc{nntp} server is located at a non-standard port, setting the
-third element of the select method to this port number should allow you
-to connect to the right port. You'll have to edit the group info for
-that (@pxref{Foreign Groups}).
-
-The name of the foreign group can be the same as a native group. In
-fact, you can subscribe to the same group from as many different servers
-you feel like. There will be no name collisions.
-
-The following variables can be used to create a virtual @code{nntp}
-server:
-
-@table @code
-
-@item nntp-server-opened-hook
-@vindex nntp-server-opened-hook
-@cindex @sc{mode reader}
-@cindex authinfo
-@cindex authentification
-@cindex nntp authentification
-@findex nntp-send-authinfo
-@findex nntp-send-mode-reader
-is run after a connection has been made. It can be used to send
-commands to the @sc{nntp} server after it has been contacted. By
-default it sends the command @code{MODE READER} to the server with the
-@code{nntp-send-mode-reader} function. This function should always be
-present in this hook.
-
-@item nntp-authinfo-function
-@vindex nntp-authinfo-function
-@findex nntp-send-authinfo
-@vindex nntp-authinfo-file
-This function will be used to send @samp{AUTHINFO} to the @sc{nntp}
-server. The default function is @code{nntp-send-authinfo}, which looks
-through your @file{~/.authinfo} (or whatever you've set the
-@code{nntp-authinfo-file} variable to) for applicable entries. If none
-are found, it will prompt you for a login name and a password. The
-format of the @file{~/.authinfo} file is (almost) the same as the
-@code{ftp} @file{~/.netrc} file, which is defined in the @code{ftp}
-manual page, but here are the salient facts:
-
-@enumerate
-@item
-The file contains one or more line, each of which define one server.
-
-@item
-Each line may contain an arbitrary number of token/value pairs. The
-valid tokens include @samp{machine}, @samp{login}, @samp{password},
-@samp{default} and @samp{force}. (The latter is not a valid
-@file{.netrc}/@code{ftp} token, which is the only way the
-@file{.authinfo} file format deviates from the @file{.netrc} file
-format.)
-
-@end enumerate
-
-Here's an example file:
-
-@example
-machine news.uio.no login larsi password geheimnis
-machine nntp.ifi.uio.no login larsi force yes
-@end example
-
-The token/value pairs may appear in any order; @samp{machine} doesn't
-have to be first, for instance.
-
-In this example, both login name and password have been supplied for the
-former server, while the latter has only the login name listed, and the
-user will be prompted for the password. The latter also has the
-@samp{force} tag, which means that the authinfo will be sent to the
-@var{nntp} server upon connection; the default (i.e., when there is not
-@samp{force} tag) is to not send authinfo to the @var{nntp} server
-until the @var{nntp} server asks for it.
-
-You can also add @samp{default} lines that will apply to all servers
-that don't have matching @samp{machine} lines.
-
-@example
-default force yes
-@end example
-
-This will force sending @samp{AUTHINFO} commands to all servers not
-previously mentioned.
-
-Remember to not leave the @file{~/.authinfo} file world-readable.
-
-@item nntp-server-action-alist
-@vindex nntp-server-action-alist
-This is a list of regexps to match on server types and actions to be
-taken when matches are made. For instance, if you want Gnus to beep
-every time you connect to innd, you could say something like:
-
-@lisp
-(setq nntp-server-action-alist
- '(("innd" (ding))))
-@end lisp
-
-You probably don't want to do that, though.
-
-The default value is
-
-@lisp
-'(("nntpd 1\\.5\\.11t"
- (remove-hook 'nntp-server-opened-hook 'nntp-send-mode-reader)))
-@end lisp
-
-This ensures that Gnus doesn't send the @code{MODE READER} command to
-nntpd 1.5.11t, since that command chokes that server, I've been told.
-
-@item nntp-maximum-request
-@vindex nntp-maximum-request
-If the @sc{nntp} server doesn't support @sc{nov} headers, this backend
-will collect headers by sending a series of @code{head} commands. To
-speed things up, the backend sends lots of these commands without
-waiting for reply, and then reads all the replies. This is controlled
-by the @code{nntp-maximum-request} variable, and is 400 by default. If
-your network is buggy, you should set this to 1.
-
-@item nntp-connection-timeout
-@vindex nntp-connection-timeout
-If you have lots of foreign @code{nntp} groups that you connect to
-regularly, you're sure to have problems with @sc{nntp} servers not
-responding properly, or being too loaded to reply within reasonable
-time. This is can lead to awkward problems, which can be helped
-somewhat by setting @code{nntp-connection-timeout}. This is an integer
-that says how many seconds the @code{nntp} backend should wait for a
-connection before giving up. If it is @code{nil}, which is the default,
-no timeouts are done.
-
-@c @item nntp-command-timeout
-@c @vindex nntp-command-timeout
-@c @cindex PPP connections
-@c @cindex dynamic IP addresses
-@c If you're running Gnus on a machine that has a dynamically assigned
-@c address, Gnus may become confused. If the address of your machine
-@c changes after connecting to the @sc{nntp} server, Gnus will simply sit
-@c waiting forever for replies from the server. To help with this
-@c unfortunate problem, you can set this command to a number. Gnus will
-@c then, if it sits waiting for a reply from the server longer than that
-@c number of seconds, shut down the connection, start a new one, and resend
-@c the command. This should hopefully be transparent to the user. A
-@c likely number is 30 seconds.
-@c
-@c @item nntp-retry-on-break
-@c @vindex nntp-retry-on-break
-@c If this variable is non-@code{nil}, you can also @kbd{C-g} if Gnus
-@c hangs. This will have much the same effect as the command timeout
-@c described above.
-
-@item nntp-server-hook
-@vindex nntp-server-hook
-This hook is run as the last step when connecting to an @sc{nntp}
-server.
-
-@findex nntp-open-rlogin
-@findex nntp-open-telnet
-@findex nntp-open-network-stream
-@item nntp-open-connection-function
-@vindex nntp-open-connection-function
-This function is used to connect to the remote system. Four pre-made
-functions are supplied:
-
-@table @code
-@item nntp-open-network-stream
-This is the default, and simply connects to some port or other on the
-remote system.
-
-@item nntp-open-rlogin
-Does an @samp{rlogin} on the
-remote system, and then does a @samp{telnet} to the @sc{nntp} server
-available there.
-
-@code{nntp-open-rlogin}-related variables:
-
-@table @code
-
-@item nntp-rlogin-program
-@vindex nntp-rlogin-program
-Program used to log in on remote machines. The default is @samp{rsh},
-but @samp{ssh} is a popular alternative.
-
-@item nntp-rlogin-parameters
-@vindex nntp-rlogin-parameters
-This list will be used as the parameter list given to @code{rsh}.
-
-@item nntp-rlogin-user-name
-@vindex nntp-rlogin-user-name
-User name on the remote system.
-
-@end table
-
-@item nntp-open-telnet
-Does a @samp{telnet} to the remote system and then another @samp{telnet}
-to get to the @sc{nntp} server.
-
-@code{nntp-open-telnet}-related variables:
-
-@table @code
-@item nntp-telnet-command
-@vindex nntp-telnet-command
-Command used to start @code{telnet}.
-
-@item nntp-telnet-switches
-@vindex nntp-telnet-switches
-List of strings to be used as the switches to the @code{telnet} command.
-
-@item nntp-telnet-user-name
-@vindex nntp-telnet-user-name
-User name for log in on the remote system.
-
-@item nntp-telnet-passwd
-@vindex nntp-telnet-passwd
-Password to use when logging in.
-
-@item nntp-telnet-parameters
-@vindex nntp-telnet-parameters
-A list of strings executed as a command after logging in
-via @code{telnet}.
-
-@item nntp-telnet-shell-prompt
-@vindex nntp-telnet-shell-prompt
-Regexp matching the shell prompt on the remote machine. The default is
-@samp{bash\\|\$ *\r?$\\|> *\r?}.
-
-@item nntp-open-telnet-envuser
-@vindex nntp-open-telnet-envuser
-If non-@code{nil}, the @code{telnet} session (client and server both)
-will support the @code{ENVIRON} option and not prompt for login name.
-This works for Solaris @code{telnet}, for instance.
-
-@end table
-
-@findex nntp-open-ssl-stream
-@item nntp-open-ssl-stream
-Opens a connection to a server over a @dfn{secure} channel. To use this
-you must have SSLay installed
-(@file{ftp://ftp.psy.uq.oz.au/pub/Crypto/SSL}, and you also need
-@file{ssl.el} (from the W3 distributeion, for instance). You then
-define a server as follows:
-
-@lisp
-;; Type `C-c C-c' after you've finished editing.
-;;
-;; "snews" is port 563 and is predefined in our /etc/services
-;;
-(nntp "snews.bar.com"
- (nntp-open-connection-function nntp-open-ssl-stream)
- (nntp-port-number "snews")
- (nntp-address "snews.bar.com"))
-@end lisp
-
-@end table
-
-@item nntp-end-of-line
-@vindex nntp-end-of-line
-String to use as end-of-line marker when talking to the @sc{nntp}
-server. This is @samp{\r\n} by default, but should be @samp{\n} when
-using @code{rlogin} to talk to the server.
-
-@item nntp-rlogin-user-name
-@vindex nntp-rlogin-user-name
-User name on the remote system when using the @code{rlogin} connect
-function.
-
-@item nntp-address
-@vindex nntp-address
-The address of the remote system running the @sc{nntp} server.
-
-@item nntp-port-number
-@vindex nntp-port-number
-Port number to connect to when using the @code{nntp-open-network-stream}
-connect function.
-
-@item nntp-buggy-select
-@vindex nntp-buggy-select
-Set this to non-@code{nil} if your select routine is buggy.
-
-@item nntp-nov-is-evil
-@vindex nntp-nov-is-evil
-If the @sc{nntp} server does not support @sc{nov}, you could set this
-variable to @code{t}, but @code{nntp} usually checks automatically whether @sc{nov}
-can be used.
-
-@item nntp-xover-commands
-@vindex nntp-xover-commands
-@cindex nov
-@cindex XOVER
-List of strings used as commands to fetch @sc{nov} lines from a
-server. The default value of this variable is @code{("XOVER"
-"XOVERVIEW")}.
-
-@item nntp-nov-gap
-@vindex nntp-nov-gap
-@code{nntp} normally sends just one big request for @sc{nov} lines to
-the server. The server responds with one huge list of lines. However,
-if you have read articles 2-5000 in the group, and only want to read
-article 1 and 5001, that means that @code{nntp} will fetch 4999 @sc{nov}
-lines that you will not need. This variable says how
-big a gap between two consecutive articles is allowed to be before the
-@code{XOVER} request is split into several request. Note that if your
-network is fast, setting this variable to a really small number means
-that fetching will probably be slower. If this variable is @code{nil},
-@code{nntp} will never split requests. The default is 5.
-
-@item nntp-prepare-server-hook
-@vindex nntp-prepare-server-hook
-A hook run before attempting to connect to an @sc{nntp} server.
-
-@item nntp-warn-about-losing-connection
-@vindex nntp-warn-about-losing-connection
-If this variable is non-@code{nil}, some noise will be made when a
-server closes connection.
-
-@item nntp-record-commands
-@vindex nntp-record-commands
-If non-@code{nil}, @code{nntp} will log all commands it sends to the
-@sc{nntp} server (along with a timestep) in the @samp{*nntp-log*}
-buffer. This is useful if you are debugging a Gnus/@sc{nntp} connection
-that doesn't seem to work.
-
-@end table
-
-
-@node News Spool
-@subsection News Spool
-@cindex nnspool
-@cindex news spool
-
-Subscribing to a foreign group from the local spool is extremely easy,
-and might be useful, for instance, to speed up reading groups that
-contain very big articles---@samp{alt.binaries.pictures.furniture}, for
-instance.
-
-Anyways, you just specify @code{nnspool} as the method and @code{""} (or
-anything else) as the address.
-
-If you have access to a local spool, you should probably use that as the
-native select method (@pxref{Finding the News}). It is normally faster
-than using an @code{nntp} select method, but might not be. It depends.
-You just have to try to find out what's best at your site.
-
-@table @code
-
-@item nnspool-inews-program
-@vindex nnspool-inews-program
-Program used to post an article.
-
-@item nnspool-inews-switches
-@vindex nnspool-inews-switches
-Parameters given to the inews program when posting an article.
-
-@item nnspool-spool-directory
-@vindex nnspool-spool-directory
-Where @code{nnspool} looks for the articles. This is normally
-@file{/usr/spool/news/}.
-
-@item nnspool-nov-directory
-@vindex nnspool-nov-directory
-Where @code{nnspool} will look for @sc{nov} files. This is normally
-@file{/usr/spool/news/over.view/}.
-
-@item nnspool-lib-dir
-@vindex nnspool-lib-dir
-Where the news lib dir is (@file{/usr/lib/news/} by default).
-
-@item nnspool-active-file
-@vindex nnspool-active-file
-The path to the active file.
-
-@item nnspool-newsgroups-file
-@vindex nnspool-newsgroups-file
-The path to the group descriptions file.
-
-@item nnspool-history-file
-@vindex nnspool-history-file
-The path to the news history file.
-
-@item nnspool-active-times-file
-@vindex nnspool-active-times-file
-The path to the active date file.
-
-@item nnspool-nov-is-evil
-@vindex nnspool-nov-is-evil
-If non-@code{nil}, @code{nnspool} won't try to use any @sc{nov} files
-that it finds.
-
-@item nnspool-sift-nov-with-sed
-@vindex nnspool-sift-nov-with-sed
-@cindex sed
-If non-@code{nil}, which is the default, use @code{sed} to get the
-relevant portion from the overview file. If nil, @code{nnspool} will
-load the entire file into a buffer and process it there.
-
-@end table
-
-
-@node Getting Mail
-@section Getting Mail
-@cindex reading mail
-@cindex mail
-
-Reading mail with a newsreader---isn't that just plain WeIrD? But of
-course.
-
-@menu
-* Getting Started Reading Mail:: A simple cookbook example.
-* Splitting Mail:: How to create mail groups.
-* Mail Backend Variables:: Variables for customizing mail handling.
-* Fancy Mail Splitting:: Gnus can do hairy splitting of incoming mail.
-* Mail and Procmail:: Reading mail groups that procmail create.
-* Incorporating Old Mail:: What about the old mail you have?
-* Expiring Mail:: Getting rid of unwanted mail.
-* Washing Mail:: Removing gruft from the mail you get.
-* Duplicates:: Dealing with duplicated mail.
-* Not Reading Mail:: Using mail backends for reading other files.
-* Choosing a Mail Backend:: Gnus can read a variety of mail formats.
-@end menu
-
-
-@node Getting Started Reading Mail
-@subsection Getting Started Reading Mail
-
-It's quite easy to use Gnus to read your new mail. You just plonk the
-mail backend of your choice into @code{gnus-secondary-select-methods},
-and things will happen automatically.
-
-For instance, if you want to use @code{nnml} (which is a "one file per
-mail" backend), you could put the following in your @file{.gnus} file:
-
-@lisp
-(setq gnus-secondary-select-methods
- '((nnml "private")))
-@end lisp
-
-Now, the next time you start Gnus, this backend will be queried for new
-articles, and it will move all the messages in your spool file to its
-directory, which is @code{~/Mail/} by default. The new group that will
-be created (@samp{mail.misc}) will be subscribed, and you can read it
-like any other group.
-
-You will probably want to split the mail into several groups, though:
-
-@lisp
-(setq nnmail-split-methods
- '(("junk" "^From:.*Lars Ingebrigtsen")
- ("crazy" "^Subject:.*die\\|^Organization:.*flabby")
- ("other" "")))
-@end lisp
-
-This will result in three new @code{nnml} mail groups being created:
-@samp{nnml:junk}, @samp{nnml:crazy}, and @samp{nnml:other}. All the
-mail that doesn't fit into the first two groups will be placed in the
-last group.
-
-This should be sufficient for reading mail with Gnus. You might want to
-give the other sections in this part of the manual a perusal, though.
-Especially @pxref{Choosing a Mail Backend} and @pxref{Expiring Mail}.
-
-
-@node Splitting Mail
-@subsection Splitting Mail
-@cindex splitting mail
-@cindex mail splitting
-
-@vindex nnmail-split-methods
-The @code{nnmail-split-methods} variable says how the incoming mail is
-to be split into groups.
-
-@lisp
-(setq nnmail-split-methods
- '(("mail.junk" "^From:.*Lars Ingebrigtsen")
- ("mail.crazy" "^Subject:.*die\\|^Organization:.*flabby")
- ("mail.other" "")))
-@end lisp
-
-This variable is a list of lists, where the first element of each of
-these lists is the name of the mail group (they do not have to be called
-something beginning with @samp{mail}, by the way), and the second
-element is a regular expression used on the header of each mail to
-determine if it belongs in this mail group. The first string may
-contain @samp{\\1} forms, like the ones used by @code{replace-match} to
-insert sub-expressions from the matched text. For instance:
-
-@lisp
-("list.\\1" "From:.* \\(.*\\)-list@@majordomo.com")
-@end lisp
-
-The second element can also be a function. In that case, it will be
-called narrowed to the headers with the first element of the rule as the
-argument. It should return a non-@code{nil} value if it thinks that the
-mail belongs in that group.
-
-The last of these groups should always be a general one, and the regular
-expression should @emph{always} be @samp{} so that it matches any mails
-that haven't been matched by any of the other regexps. (These rules are
-processed from the beginning of the alist toward the end. The first
-rule to make a match will "win", unless you have crossposting enabled.
-In that case, all matching rules will "win".)
-
-If you like to tinker with this yourself, you can set this variable to a
-function of your choice. This function will be called without any
-arguments in a buffer narrowed to the headers of an incoming mail
-message. The function should return a list of group names that it
-thinks should carry this mail message.
-
-Note that the mail backends are free to maul the poor, innocent,
-incoming headers all they want to. They all add @code{Lines} headers;
-some add @code{X-Gnus-Group} headers; most rename the Unix mbox
-@code{From<SPACE>} line to something else.
-
-@vindex nnmail-crosspost
-The mail backends all support cross-posting. If several regexps match,
-the mail will be ``cross-posted'' to all those groups.
-@code{nnmail-crosspost} says whether to use this mechanism or not. Note
-that no articles are crossposted to the general (@samp{}) group.
-
-@vindex nnmail-crosspost-link-function
-@cindex crosspost
-@cindex links
-@code{nnmh} and @code{nnml} makes crossposts by creating hard links to
-the crossposted articles. However, not all file systems support hard
-links. If that's the case for you, set
-@code{nnmail-crosspost-link-function} to @code{copy-file}. (This
-variable is @code{add-name-to-file} by default.)
-
-@kindex M-x nnmail-split-history
-@kindex nnmail-split-history
-If you wish to see where the previous mail split put the messages, you
-can use the @kbd{M-x nnmail-split-history} command.
-
-Gnus gives you all the opportunity you could possibly want for shooting
-yourself in the foot. Let's say you create a group that will contain
-all the mail you get from your boss. And then you accidentally
-unsubscribe from the group. Gnus will still put all the mail from your
-boss in the unsubscribed group, and so, when your boss mails you ``Have
-that report ready by Monday or you're fired!'', you'll never see it and,
-come Tuesday, you'll still believe that you're gainfully employed while
-you really should be out collecting empty bottles to save up for next
-month's rent money.
-
-
-@node Mail Backend Variables
-@subsection Mail Backend Variables
-
-These variables are (for the most part) pertinent to all the various
-mail backends.
-
-@table @code
-@vindex nnmail-read-incoming-hook
-@item nnmail-read-incoming-hook
-The mail backends all call this hook after reading new mail. You can
-use this hook to notify any mail watch programs, if you want to.
-
-@vindex nnmail-spool-file
-@item nnmail-spool-file
-@cindex POP mail
-@cindex MAILHOST
-@cindex movemail
-@vindex nnmail-pop-password
-@vindex nnmail-pop-password-required
-The backends will look for new mail in this file. If this variable is
-@code{nil}, the mail backends will never attempt to fetch mail by
-themselves. If you are using a POP mail server and your name is
-@samp{larsi}, you should set this variable to @samp{po:larsi}. If
-your name is not @samp{larsi}, you should probably modify that
-slightly, but you may have guessed that already, you smart & handsome
-devil! You can also set this variable to @code{pop}, and Gnus will try
-to figure out the POP mail string by itself. In any case, Gnus will
-call @code{movemail} which will contact the POP server named in the
-@code{MAILHOST} environment variable. If the POP server needs a
-password, you can either set @code{nnmail-pop-password-required} to
-@code{t} and be prompted for the password, or set
-@code{nnmail-pop-password} to the password itself.
-
-@code{nnmail-spool-file} can also be a list of mailboxes.
-
-Your Emacs has to have been configured with @samp{--with-pop} before
-compilation. This is the default, but some installations have it
-switched off.
-
-When you use a mail backend, Gnus will slurp all your mail from your
-inbox and plonk it down in your home directory. Gnus doesn't move any
-mail if you're not using a mail backend---you have to do a lot of magic
-invocations first. At the time when you have finished drawing the
-pentagram, lightened the candles, and sacrificed the goat, you really
-shouldn't be too surprised when Gnus moves your mail.
-
-@vindex nnmail-use-procmail
-@vindex nnmail-procmail-suffix
-@item nnmail-use-procmail
-If non-@code{nil}, the mail backends will look in
-@code{nnmail-procmail-directory} for incoming mail. All the files in
-that directory that have names ending in @code{nnmail-procmail-suffix}
-will be considered incoming mailboxes, and will be searched for new
-mail.
-
-@vindex nnmail-crash-box
-@item nnmail-crash-box
-When a mail backend reads a spool file, mail is first moved to this
-file, which is @file{~/.gnus-crash-box} by default. If this file
-already exists, it will always be read (and incorporated) before any
-other spool files.
-
-@vindex nnmail-split-hook
-@item nnmail-split-hook
-@findex article-decode-encoded-words
-@findex RFC1522 decoding
-@findex RFC2047 decoding
-Hook run in the buffer where the mail headers of each message is kept
-just before the splitting based on these headers is done. The hook is
-free to modify the buffer contents in any way it sees fit---the buffer
-is discarded after the splitting has been done, and no changes performed
-in the buffer will show up in any files.
-@code{gnus-article-decode-encoded-words} is one likely function to add
-to this hook.
-
-@vindex nnmail-pre-get-new-mail-hook
-@vindex nnmail-post-get-new-mail-hook
-@item nnmail-pre-get-new-mail-hook
-@itemx nnmail-post-get-new-mail-hook
-These are two useful hooks executed when treating new incoming
-mail---@code{nnmail-pre-get-new-mail-hook} (is called just before
-starting to handle the new mail) and
-@code{nnmail-post-get-new-mail-hook} (is called when the mail handling
-is done). Here's and example of using these two hooks to change the
-default file modes the new mail files get:
-
-@lisp
-(add-hook 'gnus-pre-get-new-mail-hook
- (lambda () (set-default-file-modes 511)))
-
-(add-hook 'gnus-post-get-new-mail-hook
- (lambda () (set-default-file-modes 551)))
-@end lisp
-
-@item nnmail-tmp-directory
-@vindex nnmail-tmp-directory
-This variable says where to move incoming mail to -- while processing
-it. This is usually done in the same directory that the mail backend
-inhabits (e.g., @file{~/Mail/}), but if this variable is non-@code{nil},
-it will be used instead.
-
-@item nnmail-movemail-program
-@vindex nnmail-movemail-program
-This program is executed to move mail from the user's inbox to her home
-directory. The default is @samp{movemail}.
-
-This can also be a function. In that case, the function will be called
-with two parameters -- the name of the inbox, and the file to be moved
-to.
-
-@item nnmail-delete-incoming
-@vindex nnmail-delete-incoming
-@cindex incoming mail files
-@cindex deleting incoming files
-If non-@code{nil}, the mail backends will delete the temporary incoming
-file after splitting mail into the proper groups. This is @code{t} by
-default.
-
-@c This is @code{nil} by
-@c default for reasons of security.
-
-@c Since Red Gnus is an alpha release, it is to be expected to lose mail.
-(No Gnus release since (ding) Gnus 0.10 (or something like that) have
-lost mail, I think, but that's not the point. (Except certain versions
-of Red Gnus.)) By not deleting the Incoming* files, one can be sure not
-to lose mail -- if Gnus totally whacks out, one can always recover what
-was lost.
-
-You may delete the @file{Incoming*} files at will.
-
-@item nnmail-use-long-file-names
-@vindex nnmail-use-long-file-names
-If non-@code{nil}, the mail backends will use long file and directory
-names. Groups like @samp{mail.misc} will end up in directories
-(assuming use of @code{nnml} backend) or files (assuming use of
-@code{nnfolder} backend) like @file{mail.misc}. If it is @code{nil},
-the same group will end up in @file{mail/misc}.
-
-@item nnmail-delete-file-function
-@vindex nnmail-delete-file-function
-@findex delete-file
-Function called to delete files. It is @code{delete-file} by default.
-
-@item nnmail-cache-accepted-message-ids
-@vindex nnmail-cache-accepted-message-ids
-If non-@code{nil}, put the @code{Message-ID}s of articles imported into
-the backend (via @code{Gcc}, for instance) into the mail duplication
-discovery cache. The default is @code{nil}.
-
-@end table
-
-
-@node Fancy Mail Splitting
-@subsection Fancy Mail Splitting
-@cindex mail splitting
-@cindex fancy mail splitting
-
-@vindex nnmail-split-fancy
-@findex nnmail-split-fancy
-If the rather simple, standard method for specifying how to split mail
-doesn't allow you to do what you want, you can set
-@code{nnmail-split-methods} to @code{nnmail-split-fancy}. Then you can
-play with the @code{nnmail-split-fancy} variable.
-
-Let's look at an example value of this variable first:
-
-@lisp
-;; Messages from the mailer daemon are not crossposted to any of
-;; the ordinary groups. Warnings are put in a separate group
-;; from real errors.
-(| ("from" mail (| ("subject" "warn.*" "mail.warning")
- "mail.misc"))
- ;; Non-error messages are crossposted to all relevant
- ;; groups, but we don't crosspost between the group for the
- ;; (ding) list and the group for other (ding) related mail.
- (& (| (any "ding@@ifi\\.uio\\.no" "ding.list")
- ("subject" "ding" "ding.misc"))
- ;; Other mailing lists...
- (any "procmail@@informatik\\.rwth-aachen\\.de" "procmail.list")
- (any "SmartList@@informatik\\.rwth-aachen\\.de" "SmartList.list")
- ;; People...
- (any "larsi@@ifi\\.uio\\.no" "people.Lars_Magne_Ingebrigtsen"))
- ;; Unmatched mail goes to the catch all group.
- "misc.misc")
-@end lisp
-
-This variable has the format of a @dfn{split}. A split is a (possibly)
-recursive structure where each split may contain other splits. Here are
-the five possible split syntaxes:
-
-@enumerate
-
-@item
-@samp{group}: If the split is a string, that will be taken as a group
-name. Normal regexp match expansion will be done. See below for
-examples.
-
-@item
-@var{(FIELD VALUE SPLIT)}: If the split is a list, the first element of
-which is a string, then store the message as specified by SPLIT, if
-header FIELD (a regexp) contains VALUE (also a regexp).
-
-@item
-@var{(| SPLIT...)}: If the split is a list, and the first element is
-@code{|} (vertical bar), then process each SPLIT until one of them
-matches. A SPLIT is said to match if it will cause the mail message to
-be stored in one or more groups.
-
-@item
-@var{(& SPLIT...)}: If the split is a list, and the first element is
-@code{&}, then process all SPLITs in the list.
-
-@item
-@code{junk}: If the split is the symbol @code{junk}, then don't save
-this message. Use with extreme caution.
-
-@item
-@var{(: function arg1 arg2 ...)}: If the split is a list, and the first
-element is @code{:}, then the second element will be called as a
-function with @var{args} given as arguments. The function should return
-a SPLIT.
-
-@item
-@code{nil}: If the split is @code{nil}, it is ignored.
-
-@end enumerate
-
-In these splits, @var{FIELD} must match a complete field name.
-@var{VALUE} must match a complete word according to the fundamental mode
-syntax table. You can use @code{.*} in the regexps to match partial
-field names or words. In other words, all @var{VALUE}'s are wrapped in
-@samp{\<} and @samp{\>} pairs.
-
-@vindex nnmail-split-abbrev-alist
-@var{FIELD} and @var{VALUE} can also be lisp symbols, in that case they
-are expanded as specified by the variable
-@code{nnmail-split-abbrev-alist}. This is an alist of cons cells, where
-the @code{car} of a cell contains the key, and the @code{cdr} contains the associated
-value.
-
-@vindex nnmail-split-fancy-syntax-table
-@code{nnmail-split-fancy-syntax-table} is the syntax table in effect
-when all this splitting is performed.
-
-If you want to have Gnus create groups dynamically based on some
-information in the headers (i.e., do @code{replace-match}-like
-substitutions in the group names), you can say things like:
-
-@example
-(any "debian-\\b\\(\\w+\\)@@lists.debian.org" "mail.debian.\\1")
-@end example
-
-If the string contains the element @samp{\&}, then the previously
-matched string will be substituted. Similarly, the elements @samp{\\1}
-up to @samp{\\9} will be substituted with the text matched by the
-groupings 1 through 9.
-
-
-@node Mail and Procmail
-@subsection Mail and Procmail
-@cindex procmail
-
-@cindex slocal
-@cindex elm
-Many people use @code{procmail} (or some other mail filter program or
-external delivery agent---@code{slocal}, @code{elm}, etc) to split
-incoming mail into groups. If you do that, you should set
-@code{nnmail-spool-file} to @code{procmail} to ensure that the mail
-backends never ever try to fetch mail by themselves.
-
-If you have a combined @code{procmail}/POP/mailbox setup, you can do
-something like the following:
-
-@vindex nnmail-use-procmail
-@lisp
-(setq nnmail-use-procmail t)
-(setq nnmail-spool-file
- '("/usr/spool/mail/my-name" "po:my-name"))
-@end lisp
-
-This also means that you probably don't want to set
-@code{nnmail-split-methods} either, which has some, perhaps, unexpected
-side effects.
-
-When a mail backend is queried for what groups it carries, it replies
-with the contents of that variable, along with any groups it has figured
-out that it carries by other means. None of the backends, except
-@code{nnmh}, actually go out to the disk and check what groups actually
-exist. (It's not trivial to distinguish between what the user thinks is
-a basis for a newsgroup and what is just a plain old file or directory.)
-
-This means that you have to tell Gnus (and the backends) by hand what
-groups exist.
-
-Let's take the @code{nnmh} backend as an example:
-
-The folders are located in @code{nnmh-directory}, say, @file{~/Mail/}.
-There are three folders, @file{foo}, @file{bar} and @file{mail.baz}.
-
-Go to the group buffer and type @kbd{G m}. When prompted, answer
-@samp{foo} for the name and @samp{nnmh} for the method. Repeat
-twice for the two other groups, @samp{bar} and @samp{mail.baz}. Be sure
-to include all your mail groups.
-
-That's it. You are now set to read your mail. An active file for this
-method will be created automatically.
-
-@vindex nnmail-procmail-suffix
-@vindex nnmail-procmail-directory
-If you use @code{nnfolder} or any other backend that store more than a
-single article in each file, you should never have procmail add mails to
-the file that Gnus sees. Instead, procmail should put all incoming mail
-in @code{nnmail-procmail-directory}. To arrive at the file name to put
-the incoming mail in, append @code{nnmail-procmail-suffix} to the group
-name. The mail backends will read the mail from these files.
-
-@vindex nnmail-resplit-incoming
-When Gnus reads a file called @file{mail.misc.spool}, this mail will be
-put in the @code{mail.misc}, as one would expect. However, if you want
-Gnus to split the mail the normal way, you could set
-@code{nnmail-resplit-incoming} to @code{t}.
-
-@vindex nnmail-keep-last-article
-If you use @code{procmail} to split things directly into an @code{nnmh}
-directory (which you shouldn't do), you should set
-@code{nnmail-keep-last-article} to non-@code{nil} to prevent Gnus from
-ever expiring the final article (i.e., the article with the highest
-article number) in a mail newsgroup. This is quite, quite important.
-
-Here's an example setup: The incoming spools are located in
-@file{~/incoming/} and have @samp{""} as suffixes (i.e., the incoming
-spool files have the same names as the equivalent groups). The
-@code{nnfolder} backend is to be used as the mail interface, and the
-@code{nnfolder} directory is @file{~/fMail/}.
-
-@lisp
-(setq nnfolder-directory "~/fMail/")
-(setq nnmail-spool-file 'procmail)
-(setq nnmail-procmail-directory "~/incoming/")
-(setq gnus-secondary-select-methods '((nnfolder "")))
-(setq nnmail-procmail-suffix "")
-@end lisp
-
-
-@node Incorporating Old Mail
-@subsection Incorporating Old Mail
-
-Most people have lots of old mail stored in various file formats. If
-you have set up Gnus to read mail using one of the spiffy Gnus mail
-backends, you'll probably wish to have that old mail incorporated into
-your mail groups.
-
-Doing so can be quite easy.
-
-To take an example: You're reading mail using @code{nnml}
-(@pxref{Mail Spool}), and have set @code{nnmail-split-methods} to a
-satisfactory value (@pxref{Splitting Mail}). You have an old Unix mbox
-file filled with important, but old, mail. You want to move it into
-your @code{nnml} groups.
-
-Here's how:
-
-@enumerate
-@item
-Go to the group buffer.
-
-@item
-Type `G f' and give the path to the mbox file when prompted to create an
-@code{nndoc} group from the mbox file (@pxref{Foreign Groups}).
-
-@item
-Type `SPACE' to enter the newly created group.
-
-@item
-Type `M P b' to process-mark all articles in this group's buffer
-(@pxref{Setting Process Marks}).
-
-@item
-Type `B r' to respool all the process-marked articles, and answer
-@samp{nnml} when prompted (@pxref{Mail Group Commands}).
-@end enumerate
-
-All the mail messages in the mbox file will now also be spread out over
-all your @code{nnml} groups. Try entering them and check whether things
-have gone without a glitch. If things look ok, you may consider
-deleting the mbox file, but I wouldn't do that unless I was absolutely
-sure that all the mail has ended up where it should be.
-
-Respooling is also a handy thing to do if you're switching from one mail
-backend to another. Just respool all the mail in the old mail groups
-using the new mail backend.
-
-
-@node Expiring Mail
-@subsection Expiring Mail
-@cindex article expiry
-
-Traditional mail readers have a tendency to remove mail articles when
-you mark them as read, in some way. Gnus takes a fundamentally
-different approach to mail reading.
-
-Gnus basically considers mail just to be news that has been received in
-a rather peculiar manner. It does not think that it has the power to
-actually change the mail, or delete any mail messages. If you enter a
-mail group, and mark articles as ``read'', or kill them in some other
-fashion, the mail articles will still exist on the system. I repeat:
-Gnus will not delete your old, read mail. Unless you ask it to, of
-course.
-
-To make Gnus get rid of your unwanted mail, you have to mark the
-articles as @dfn{expirable}. This does not mean that the articles will
-disappear right away, however. In general, a mail article will be
-deleted from your system if, 1) it is marked as expirable, AND 2) it is
-more than one week old. If you do not mark an article as expirable, it
-will remain on your system until hell freezes over. This bears
-repeating one more time, with some spurious capitalizations: IF you do
-NOT mark articles as EXPIRABLE, Gnus will NEVER delete those ARTICLES.
-
-@vindex gnus-auto-expirable-newsgroups
-You do not have to mark articles as expirable by hand. Groups that
-match the regular expression @code{gnus-auto-expirable-newsgroups} will
-have all articles that you read marked as expirable automatically. All
-articles marked as expirable have an @samp{E} in the first
-column in the summary buffer.
-
-By default, if you have auto expiry switched on, Gnus will mark all the
-articles you read as expirable, no matter if they were read or unread
-before. To avoid having articles marked as read marked as expirable
-automatically, you can put something like the following in your
-@file{.gnus} file:
-
-@vindex gnus-mark-article-hook
-@lisp
-(remove-hook 'gnus-mark-article-hook
- 'gnus-summary-mark-read-and-unread-as-read)
-(add-hook 'gnus-mark-article-hook 'gnus-summary-mark-unread-as-read)
-@end lisp
-
-Note that making a group auto-expirable doesn't mean that all read
-articles are expired---only the articles marked as expirable
-will be expired. Also note that using the @kbd{d} command won't make
-groups expirable---only semi-automatic marking of articles as read will
-mark the articles as expirable in auto-expirable groups.
-
-Let's say you subscribe to a couple of mailing lists, and you want the
-articles you have read to disappear after a while:
-
-@lisp
-(setq gnus-auto-expirable-newsgroups
- "mail.nonsense-list\\|mail.nice-list")
-@end lisp
-
-Another way to have auto-expiry happen is to have the element
-@code{auto-expire} in the group parameters of the group.
-
-If you use adaptive scoring (@pxref{Adaptive Scoring}) and
-auto-expiring, you'll have problems. Auto-expiring and adaptive scoring
-don't really mix very well.
-
-@vindex nnmail-expiry-wait
-The @code{nnmail-expiry-wait} variable supplies the default time an
-expirable article has to live. Gnus starts counting days from when the
-message @emph{arrived}, not from when it was sent. The default is seven
-days.
-
-Gnus also supplies a function that lets you fine-tune how long articles
-are to live, based on what group they are in. Let's say you want to
-have one month expiry period in the @samp{mail.private} group, a one day
-expiry period in the @samp{mail.junk} group, and a six day expiry period
-everywhere else:
-
-@vindex nnmail-expiry-wait-function
-@lisp
-(setq nnmail-expiry-wait-function
- (lambda (group)
- (cond ((string= group "mail.private")
- 31)
- ((string= group "mail.junk")
- 1)
- ((string= group "important")
- 'never)
- (t
- 6))))
-@end lisp
-
-The group names this function is fed are ``unadorned'' group
-names---no @samp{nnml:} prefixes and the like.
-
-The @code{nnmail-expiry-wait} variable and
-@code{nnmail-expiry-wait-function} function can either be a number (not
-necessarily an integer) or one of the symbols @code{immediate} or
-@code{never}.
-
-You can also use the @code{expiry-wait} group parameter to selectively
-change the expiry period (@pxref{Group Parameters}).
-
-@vindex nnmail-keep-last-article
-If @code{nnmail-keep-last-article} is non-@code{nil}, Gnus will never
-expire the final article in a mail newsgroup. This is to make life
-easier for procmail users.
-
-@vindex gnus-total-expirable-newsgroups
-By the way: That line up there, about Gnus never expiring non-expirable
-articles, is a lie. If you put @code{total-expire} in the group
-parameters, articles will not be marked as expirable, but all read
-articles will be put through the expiry process. Use with extreme
-caution. Even more dangerous is the
-@code{gnus-total-expirable-newsgroups} variable. All groups that match
-this regexp will have all read articles put through the expiry process,
-which means that @emph{all} old mail articles in the groups in question
-will be deleted after a while. Use with extreme caution, and don't come
-crying to me when you discover that the regexp you used matched the
-wrong group and all your important mail has disappeared. Be a
-@emph{man}! Or a @emph{woman}! Whatever you feel more comfortable
-with! So there!
-
-Most people make most of their mail groups total-expirable, though.
-
-@vindex gnus-inhibit-user-auto-expire
-If @code{gnus-inhibit-user-auto-expire} is non-@code{nil}, user marking
-commands will not mark an article as expirable, even if the group has
-auto-expire turned on.
-
-
-@node Washing Mail
-@subsection Washing Mail
-@cindex mail washing
-@cindex list server brain damage
-@cindex incoming mail treatment
-
-Mailers and list servers are notorious for doing all sorts of really,
-really stupid things with mail. ``Hey, RFC822 doesn't explicitly
-prohibit us from adding the string @code{wE aRe ElItE!!!!!1!!} to the
-end of all lines passing through our server, so let's do that!!!!1!''
-Yes, but RFC822 wasn't designed to be read by morons. Things that were
-considered to be self-evident were not discussed. So. Here we are.
-
-Case in point: The German version of Microsoft Exchange adds @samp{AW:
-} to the subjects of replies instead of @samp{Re: }. I could pretend to
-be shocked and dismayed by this, but I haven't got the energy. It is to
-laugh.
-
-Gnus provides a plethora of functions for washing articles while
-displaying them, but it might be nicer to do the filtering before
-storing the mail to disc. For that purpose, we have three hooks and
-various functions that can be put in these hooks.
-
-@table @code
-@item nnmail-prepare-incoming-hook
-@vindex nnmail-prepare-incoming-hook
-This hook is called before doing anything with the mail and is meant for
-grand, sweeping gestures. It is called in a buffer that contains all
-the new, incoming mail. Functions to be used include:
-
-@table @code
-@item nnheader-ms-strip-cr
-@findex nnheader-ms-strip-cr
-Remove trailing carriage returns from each line. This is default on
-Emacs running on MS machines.
-
-@end table
-
-@item nnmail-prepare-incoming-header-hook
-@vindex nnmail-prepare-incoming-header-hook
-This hook is called narrowed to each header. It can be used when
-cleaning up the headers. Functions that can be used include:
-
-@table @code
-@item nnmail-remove-leading-whitespace
-@findex nnmail-remove-leading-whitespace
-Clear leading white space that ``helpful'' listservs have added to the
-headers to make them look nice. Aaah.
-
-@item nnmail-remove-list-identifiers
-@findex nnmail-remove-list-identifiers
-Some list servers add an identifier---for example, @samp{(idm)}---to the
-beginning of all @code{Subject} headers. I'm sure that's nice for
-people who use stone age mail readers. This function will remove
-strings that match the @code{nnmail-list-identifiers} regexp, which can
-also be a list of regexp.
-
-For instance, if you want to remove the @samp{(idm)} and the
-@samp{nagnagnag} identifiers:
-
-@lisp
-(setq nnmail-list-identifiers
- '("(idm)" "nagnagnag"))
-@end lisp
-
-@item nnmail-remove-tabs
-@findex nnmail-remove-tabs
-Translate all @samp{TAB} characters into @samp{SPACE} characters.
-
-@end table
-
-@item nnmail-prepare-incoming-message-hook
-@vindex nnmail-prepare-incoming-message-hook
-This hook is called narrowed to each message. Functions to be used
-include:
-
-@table @code
-@item article-de-quoted-unreadable
-@findex article-de-quoted-unreadable
-Decode Quoted Readable encoding.
-
-@end table
-@end table
-
-
-@node Duplicates
-@subsection Duplicates
-
-@vindex nnmail-treat-duplicates
-@vindex nnmail-message-id-cache-length
-@vindex nnmail-message-id-cache-file
-@cindex duplicate mails
-If you are a member of a couple of mailing lists, you will sometimes
-receive two copies of the same mail. This can be quite annoying, so
-@code{nnmail} checks for and treats any duplicates it might find. To do
-this, it keeps a cache of old @code{Message-ID}s---
-@code{nnmail-message-id-cache-file}, which is @file{~/.nnmail-cache} by
-default. The approximate maximum number of @code{Message-ID}s stored
-there is controlled by the @code{nnmail-message-id-cache-length}
-variable, which is 1000 by default. (So 1000 @code{Message-ID}s will be
-stored.) If all this sounds scary to you, you can set
-@code{nnmail-treat-duplicates} to @code{warn} (which is what it is by
-default), and @code{nnmail} won't delete duplicate mails. Instead it
-will insert a warning into the head of the mail saying that it thinks
-that this is a duplicate of a different message.
-
-This variable can also be a function. If that's the case, the function
-will be called from a buffer narrowed to the message in question with
-the @code{Message-ID} as a parameter. The function must return either
-@code{nil}, @code{warn}, or @code{delete}.
-
-You can turn this feature off completely by setting the variable to
-@code{nil}.
-
-If you want all the duplicate mails to be put into a special
-@dfn{duplicates} group, you could do that using the normal mail split
-methods:
-
-@lisp
-(setq nnmail-split-fancy
- '(| ;; Messages duplicates go to a separate group.
- ("gnus-warning" "duplication of message" "duplicate")
- ;; Message from daemons, postmaster, and the like to another.
- (any mail "mail.misc")
- ;; Other rules.
- [ ... ] ))
-@end lisp
-
-Or something like:
-@lisp
-(setq nnmail-split-methods
- '(("duplicates" "^Gnus-Warning:")
- ;; Other rules.
- [...]))
-@end lisp
-
-Here's a neat feature: If you know that the recipient reads her mail
-with Gnus, and that she has @code{nnmail-treat-duplicates} set to
-@code{delete}, you can send her as many insults as you like, just by
-using a @code{Message-ID} of a mail that you know that she's already
-received. Think of all the fun! She'll never see any of it! Whee!
-
-
-@node Not Reading Mail
-@subsection Not Reading Mail
-
-If you start using any of the mail backends, they have the annoying
-habit of assuming that you want to read mail with them. This might not
-be unreasonable, but it might not be what you want.
-
-If you set @code{nnmail-spool-file} to @code{nil}, none of the backends
-will ever attempt to read incoming mail, which should help.
-
-@vindex nnbabyl-get-new-mail
-@vindex nnmbox-get-new-mail
-@vindex nnml-get-new-mail
-@vindex nnmh-get-new-mail
-@vindex nnfolder-get-new-mail
-This might be too much, if, for instance, you are reading mail quite
-happily with @code{nnml} and just want to peek at some old @sc{rmail}
-file you have stashed away with @code{nnbabyl}. All backends have
-variables called backend-@code{get-new-mail}. If you want to disable
-the @code{nnbabyl} mail reading, you edit the virtual server for the
-group to have a setting where @code{nnbabyl-get-new-mail} to @code{nil}.
-
-All the mail backends will call @code{nn}*@code{-prepare-save-mail-hook}
-narrowed to the article to be saved before saving it when reading
-incoming mail.
-
-
-@node Choosing a Mail Backend
-@subsection Choosing a Mail Backend
-
-Gnus will read the mail spool when you activate a mail group. The mail
-file is first copied to your home directory. What happens after that
-depends on what format you want to store your mail in.
-
-@menu
-* Unix Mail Box:: Using the (quite) standard Un*x mbox.
-* Rmail Babyl:: Emacs programs use the rmail babyl format.
-* Mail Spool:: Store your mail in a private spool?
-* MH Spool:: An mhspool-like backend.
-* Mail Folders:: Having one file for each group.
-@end menu
-
-
-@node Unix Mail Box
-@subsubsection Unix Mail Box
-@cindex nnmbox
-@cindex unix mail box
-
-@vindex nnmbox-active-file
-@vindex nnmbox-mbox-file
-The @dfn{nnmbox} backend will use the standard Un*x mbox file to store
-mail. @code{nnmbox} will add extra headers to each mail article to say
-which group it belongs in.
-
-Virtual server settings:
-
-@table @code
-@item nnmbox-mbox-file
-@vindex nnmbox-mbox-file
-The name of the mail box in the user's home directory.
-
-@item nnmbox-active-file
-@vindex nnmbox-active-file
-The name of the active file for the mail box.
-
-@item nnmbox-get-new-mail
-@vindex nnmbox-get-new-mail
-If non-@code{nil}, @code{nnmbox} will read incoming mail and split it
-into groups.
-@end table
-
-
-@node Rmail Babyl
-@subsubsection Rmail Babyl
-@cindex nnbabyl
-@cindex rmail mbox
-
-@vindex nnbabyl-active-file
-@vindex nnbabyl-mbox-file
-The @dfn{nnbabyl} backend will use a babyl mail box (aka. @dfn{rmail
-mbox}) to store mail. @code{nnbabyl} will add extra headers to each mail
-article to say which group it belongs in.
-
-Virtual server settings:
-
-@table @code
-@item nnbabyl-mbox-file
-@vindex nnbabyl-mbox-file
-The name of the rmail mbox file.
-
-@item nnbabyl-active-file
-@vindex nnbabyl-active-file
-The name of the active file for the rmail box.
-
-@item nnbabyl-get-new-mail
-@vindex nnbabyl-get-new-mail
-If non-@code{nil}, @code{nnbabyl} will read incoming mail.
-@end table
-
-
-@node Mail Spool
-@subsubsection Mail Spool
-@cindex nnml
-@cindex mail @sc{nov} spool
-
-The @dfn{nnml} spool mail format isn't compatible with any other known
-format. It should be used with some caution.
-
-@vindex nnml-directory
-If you use this backend, Gnus will split all incoming mail into files,
-one file for each mail, and put the articles into the corresponding
-directories under the directory specified by the @code{nnml-directory}
-variable. The default value is @file{~/Mail/}.
-
-You do not have to create any directories beforehand; Gnus will take
-care of all that.
-
-If you have a strict limit as to how many files you are allowed to store
-in your account, you should not use this backend. As each mail gets its
-own file, you might very well occupy thousands of inodes within a few
-weeks. If this is no problem for you, and it isn't a problem for you
-having your friendly systems administrator walking around, madly,
-shouting ``Who is eating all my inodes?! Who? Who!?!'', then you should
-know that this is probably the fastest format to use. You do not have
-to trudge through a big mbox file just to read your new mail.
-
-@code{nnml} is probably the slowest backend when it comes to article
-splitting. It has to create lots of files, and it also generates
-@sc{nov} databases for the incoming mails. This makes it the fastest
-backend when it comes to reading mail.
-
-Virtual server settings:
-
-@table @code
-@item nnml-directory
-@vindex nnml-directory
-All @code{nnml} directories will be placed under this directory.
-
-@item nnml-active-file
-@vindex nnml-active-file
-The active file for the @code{nnml} server.
-
-@item nnml-newsgroups-file
-@vindex nnml-newsgroups-file
-The @code{nnml} group descriptions file. @xref{Newsgroups File
-Format}.
-
-@item nnml-get-new-mail
-@vindex nnml-get-new-mail
-If non-@code{nil}, @code{nnml} will read incoming mail.
-
-@item nnml-nov-is-evil
-@vindex nnml-nov-is-evil
-If non-@code{nil}, this backend will ignore any @sc{nov} files.
-
-@item nnml-nov-file-name
-@vindex nnml-nov-file-name
-The name of the @sc{nov} files. The default is @file{.overview}.
-
-@item nnml-prepare-save-mail-hook
-@vindex nnml-prepare-save-mail-hook
-Hook run narrowed to an article before saving.
-
-@end table
-
-@findex nnml-generate-nov-databases
-If your @code{nnml} groups and @sc{nov} files get totally out of whack,
-you can do a complete update by typing @kbd{M-x
-nnml-generate-nov-databases}. This command will trawl through the
-entire @code{nnml} hierarchy, looking at each and every article, so it
-might take a while to complete. A better interface to this
-functionality can be found in the server buffer (@pxref{Server
-Commands}).
-
-
-@node MH Spool
-@subsubsection MH Spool
-@cindex nnmh
-@cindex mh-e mail spool
-
-@code{nnmh} is just like @code{nnml}, except that is doesn't generate
-@sc{nov} databases and it doesn't keep an active file. This makes
-@code{nnmh} a @emph{much} slower backend than @code{nnml}, but it also
-makes it easier to write procmail scripts for.
-
-Virtual server settings:
-
-@table @code
-@item nnmh-directory
-@vindex nnmh-directory
-All @code{nnmh} directories will be located under this directory.
-
-@item nnmh-get-new-mail
-@vindex nnmh-get-new-mail
-If non-@code{nil}, @code{nnmh} will read incoming mail.
-
-@item nnmh-be-safe
-@vindex nnmh-be-safe
-If non-@code{nil}, @code{nnmh} will go to ridiculous lengths to make
-sure that the articles in the folder are actually what Gnus thinks they
-are. It will check date stamps and stat everything in sight, so
-setting this to @code{t} will mean a serious slow-down. If you never
-use anything but Gnus to read the @code{nnmh} articles, you do not have
-to set this variable to @code{t}.
-@end table
-
-
-@node Mail Folders
-@subsubsection Mail Folders
-@cindex nnfolder
-@cindex mbox folders
-@cindex mail folders
-
-@code{nnfolder} is a backend for storing each mail group in a separate
-file. Each file is in the standard Un*x mbox format. @code{nnfolder}
-will add extra headers to keep track of article numbers and arrival
-dates.
-
-Virtual server settings:
-
-@table @code
-@item nnfolder-directory
-@vindex nnfolder-directory
-All the @code{nnfolder} mail boxes will be stored under this directory.
-
-@item nnfolder-active-file
-@vindex nnfolder-active-file
-The name of the active file.
-
-@item nnfolder-newsgroups-file
-@vindex nnfolder-newsgroups-file
-The name of the group descriptions file. @xref{Newsgroups File Format}.
-
-@item nnfolder-get-new-mail
-@vindex nnfolder-get-new-mail
-If non-@code{nil}, @code{nnfolder} will read incoming mail.
-
-@item nnfolder-save-buffer-hook
-@vindex nnfolder-save-buffer-hook
-@cindex backup files
-Hook run before saving the folders. Note that Emacs does the normal
-backup renaming of files even with the @code{nnfolder} buffers. If you
-wish to switch this off, you could say something like the following in
-your @file{.emacs} file:
-
-@lisp
-(defun turn-off-backup ()
- (set (make-local-variable 'backup-inhibited) t))
-
-(add-hook 'nnfolder-save-buffer-hook 'turn-off-backup)
-@end lisp
-
-@item nnfolder-delete-mail-hook
-@vindex nnfolder-delete-mail-hook
-Hook run in a buffer narrowed to the message that is to be deleted.
-This function can be used to copy the message to somewhere else, or to
-extract some information from it before removing it.
-
-@end table
-
-
-@findex nnfolder-generate-active-file
-@kindex M-x nnfolder-generate-active-file
-If you have lots of @code{nnfolder}-like files you'd like to read with
-@code{nnfolder}, you can use the @kbd{M-x nnfolder-generate-active-file}
-command to make @code{nnfolder} aware of all likely files in
-@code{nnfolder-directory}.
-
-
-@node Other Sources
-@section Other Sources
-
-Gnus can do more than just read news or mail. The methods described
-below allow Gnus to view directories and files as if they were
-newsgroups.
-
-@menu
-* Directory Groups:: You can read a directory as if it was a newsgroup.
-* Anything Groups:: Dired? Who needs dired?
-* Document Groups:: Single files can be the basis of a group.
-* SOUP:: Reading @sc{SOUP} packets ``offline''.
-* Web Searches:: Creating groups from articles that match a string.
-* Mail-To-News Gateways:: Posting articles via mail-to-news gateways.
-@end menu
-
-
-@node Directory Groups
-@subsection Directory Groups
-@cindex nndir
-@cindex directory groups
-
-If you have a directory that has lots of articles in separate files in
-it, you might treat it as a newsgroup. The files have to have numerical
-names, of course.
-
-This might be an opportune moment to mention @code{ange-ftp} (and its
-successor @code{efs}), that most wonderful of all wonderful Emacs
-packages. When I wrote @code{nndir}, I didn't think much about it---a
-backend to read directories. Big deal.
-
-@code{ange-ftp} changes that picture dramatically. For instance, if you
-enter the @code{ange-ftp} file name
-@file{/ftp.hpc.uh.edu:/pub/emacs/ding-list/} as the directory name,
-@code{ange-ftp} or @code{efs} will actually allow you to read this
-directory over at @samp{sina} as a newsgroup. Distributed news ahoy!
-
-@code{nndir} will use @sc{nov} files if they are present.
-
-@code{nndir} is a ``read-only'' backend---you can't delete or expire
-articles with this method. You can use @code{nnmh} or @code{nnml} for
-whatever you use @code{nndir} for, so you could switch to any of those
-methods if you feel the need to have a non-read-only @code{nndir}.
-
-
-@node Anything Groups
-@subsection Anything Groups
-@cindex nneething
-
-From the @code{nndir} backend (which reads a single spool-like
-directory), it's just a hop and a skip to @code{nneething}, which
-pretends that any arbitrary directory is a newsgroup. Strange, but
-true.
-
-When @code{nneething} is presented with a directory, it will scan this
-directory and assign article numbers to each file. When you enter such
-a group, @code{nneething} must create ``headers'' that Gnus can use.
-After all, Gnus is a newsreader, in case you're
-forgetting. @code{nneething} does this in a two-step process. First, it
-snoops each file in question. If the file looks like an article (i.e.,
-the first few lines look like headers), it will use this as the head.
-If this is just some arbitrary file without a head (e.g. a C source
-file), @code{nneething} will cobble up a header out of thin air. It
-will use file ownership, name and date and do whatever it can with these
-elements.
-
-All this should happen automatically for you, and you will be presented
-with something that looks very much like a newsgroup. Totally like a
-newsgroup, to be precise. If you select an article, it will be displayed
-in the article buffer, just as usual.
-
-If you select a line that represents a directory, Gnus will pop you into
-a new summary buffer for this @code{nneething} group. And so on. You can
-traverse the entire disk this way, if you feel like, but remember that
-Gnus is not dired, really, and does not intend to be, either.
-
-There are two overall modes to this action---ephemeral or solid. When
-doing the ephemeral thing (i.e., @kbd{G D} from the group buffer), Gnus
-will not store information on what files you have read, and what files
-are new, and so on. If you create a solid @code{nneething} group the
-normal way with @kbd{G m}, Gnus will store a mapping table between
-article numbers and file names, and you can treat this group like any
-other groups. When you activate a solid @code{nneething} group, you will
-be told how many unread articles it contains, etc., etc.
-
-Some variables:
-
-@table @code
-@item nneething-map-file-directory
-@vindex nneething-map-file-directory
-All the mapping files for solid @code{nneething} groups will be stored
-in this directory, which defaults to @file{~/.nneething/}.
-
-@item nneething-exclude-files
-@vindex nneething-exclude-files
-All files that match this regexp will be ignored. Nice to use to exclude
-auto-save files and the like, which is what it does by default.
-
-@item nneething-include-files
-@vindex nneething-include-files
-Regexp saying what files to include in the group. If this variable is
-non-@code{nil}, only files matching this regexp will be included.
-
-@item nneething-map-file
-@vindex nneething-map-file
-Name of the map files.
-@end table
-
-
-@node Document Groups
-@subsection Document Groups
-@cindex nndoc
-@cindex documentation group
-@cindex help group
-
-@code{nndoc} is a cute little thing that will let you read a single file
-as a newsgroup. Several files types are supported:
-
-@table @code
-@cindex babyl
-@cindex rmail mbox
-
-@item babyl
-The babyl (rmail) mail box.
-@cindex mbox
-@cindex Unix mbox
-
-@item mbox
-The standard Unix mbox file.
-
-@cindex MMDF mail box
-@item mmdf
-The MMDF mail box format.
-
-@item news
-Several news articles appended into a file.
-
-@item rnews
-@cindex rnews batch files
-The rnews batch transport format.
-@cindex forwarded messages
-
-@item forward
-Forwarded articles.
-
-@item mime-parts
-MIME multipart messages, besides digests.
-
-@item mime-digest
-@cindex digest
-@cindex MIME digest
-@cindex 1153 digest
-@cindex RFC 1153 digest
-@cindex RFC 341 digest
-MIME (RFC 1341) digest format.
-
-@item standard-digest
-The standard (RFC 1153) digest format.
-
-@item slack-digest
-Non-standard digest format---matches most things, but does it badly.
-@end table
-
-You can also use the special ``file type'' @code{guess}, which means
-that @code{nndoc} will try to guess what file type it is looking at.
-@code{digest} means that @code{nndoc} should guess what digest type the
-file is.
-
-@code{nndoc} will not try to change the file or insert any extra headers into
-it---it will simply, like, let you use the file as the basis for a
-group. And that's it.
-
-If you have some old archived articles that you want to insert into your
-new & spiffy Gnus mail backend, @code{nndoc} can probably help you with
-that. Say you have an old @file{RMAIL} file with mail that you now want
-to split into your new @code{nnml} groups. You look at that file using
-@code{nndoc} (using the @kbd{G f} command in the group buffer
-(@pxref{Foreign Groups})), set the process mark on all the articles in
-the buffer (@kbd{M P b}, for instance), and then re-spool (@kbd{B r})
-using @code{nnml}. If all goes well, all the mail in the @file{RMAIL}
-file is now also stored in lots of @code{nnml} directories, and you can
-delete that pesky @file{RMAIL} file. If you have the guts!
-
-Virtual server variables:
-
-@table @code
-@item nndoc-article-type
-@vindex nndoc-article-type
-This should be one of @code{mbox}, @code{babyl}, @code{digest},
-@code{news}, @code{rnews}, @code{mmdf}, @code{forward}, @code{rfc934},
-@code{rfc822-forward}, @code{mime-parts}, @code{mime-digest},
-@code{standard-digest}, @code{slack-digest}, @code{clari-briefs} or
-@code{guess}.
-
-@item nndoc-post-type
-@vindex nndoc-post-type
-This variable says whether Gnus is to consider the group a news group or
-a mail group. There are two valid values: @code{mail} (the default)
-and @code{news}.
-@end table
-
-@menu
-* Document Server Internals:: How to add your own document types.
-@end menu
-
-
-@node Document Server Internals
-@subsubsection Document Server Internals
-
-Adding new document types to be recognized by @code{nndoc} isn't
-difficult. You just have to whip up a definition of what the document
-looks like, write a predicate function to recognize that document type,
-and then hook into @code{nndoc}.
-
-First, here's an example document type definition:
-
-@example
-(mmdf
- (article-begin . "^\^A\^A\^A\^A\n")
- (body-end . "^\^A\^A\^A\^A\n"))
-@end example
-
-The definition is simply a unique @dfn{name} followed by a series of
-regexp pseudo-variable settings. Below are the possible
-variables---don't be daunted by the number of variables; most document
-types can be defined with very few settings:
-
-@table @code
-@item first-article
-If present, @code{nndoc} will skip past all text until it finds
-something that match this regexp. All text before this will be
-totally ignored.
-
-@item article-begin
-This setting has to be present in all document type definitions. It
-says what the beginning of each article looks like.
-
-@item head-begin-function
-If present, this should be a function that moves point to the head of
-the article.
-
-@item nndoc-head-begin
-If present, this should be a regexp that matches the head of the
-article.
-
-@item nndoc-head-end
-This should match the end of the head of the article. It defaults to
-@samp{^$}---the empty line.
-
-@item body-begin-function
-If present, this function should move point to the beginning of the body
-of the article.
-
-@item body-begin
-This should match the beginning of the body of the article. It defaults
-to @samp{^\n}.
-
-@item body-end-function
-If present, this function should move point to the end of the body of
-the article.
-
-@item body-end
-If present, this should match the end of the body of the article.
-
-@item file-end
-If present, this should match the end of the file. All text after this
-regexp will be totally ignored.
-
-@end table
-
-So, using these variables @code{nndoc} is able to dissect a document
-file into a series of articles, each with a head and a body. However, a
-few more variables are needed since not all document types are all that
-news-like---variables needed to transform the head or the body into
-something that's palatable for Gnus:
-
-@table @code
-@item prepare-body-function
-If present, this function will be called when requesting an article. It
-will be called with point at the start of the body, and is useful if the
-document has encoded some parts of its contents.
-
-@item article-transform-function
-If present, this function is called when requesting an article. It's
-meant to be used for more wide-ranging transformation of both head and
-body of the article.
-
-@item generate-head-function
-If present, this function is called to generate a head that Gnus can
-understand. It is called with the article number as a parameter, and is
-expected to generate a nice head for the article in question. It is
-called when requesting the headers of all articles.
-
-@end table
-
-Let's look at the most complicated example I can come up with---standard
-digests:
-
-@example
-(standard-digest
- (first-article . ,(concat "^" (make-string 70 ?-) "\n\n+"))
- (article-begin . ,(concat "\n\n" (make-string 30 ?-) "\n\n+"))
- (prepare-body-function . nndoc-unquote-dashes)
- (body-end-function . nndoc-digest-body-end)
- (head-end . "^ ?$")
- (body-begin . "^ ?\n")
- (file-end . "^End of .*digest.*[0-9].*\n\\*\\*\\|^End of.*Digest *$")
- (subtype digest guess))
-@end example
-
-We see that all text before a 70-width line of dashes is ignored; all
-text after a line that starts with that @samp{^End of} is also ignored;
-each article begins with a 30-width line of dashes; the line separating
-the head from the body may contain a single space; and that the body is
-run through @code{nndoc-unquote-dashes} before being delivered.
-
-To hook your own document definition into @code{nndoc}, use the
-@code{nndoc-add-type} function. It takes two parameters---the first is
-the definition itself and the second (optional) parameter says where in
-the document type definition alist to put this definition. The alist is
-traversed sequentially, and @code{nndoc-TYPE-type-p} is called for a given type @code{TYPE}. So @code{nndoc-mmdf-type-p} is called to see whether a document
-is of @code{mmdf} type, and so on. These type predicates should return
-@code{nil} if the document is not of the correct type; @code{t} if it is
-of the correct type; and a number if the document might be of the
-correct type. A high number means high probability; a low number means
-low probability with @samp{0} being the lowest valid number.
-
-
-@node SOUP
-@subsection SOUP
-@cindex SOUP
-@cindex offline
-
-In the PC world people often talk about ``offline'' newsreaders. These
-are thingies that are combined reader/news transport monstrosities.
-With built-in modem programs. Yecchh!
-
-Of course, us Unix Weenie types of human beans use things like
-@code{uucp} and, like, @code{nntpd} and set up proper news and mail
-transport things like Ghod intended. And then we just use normal
-newsreaders.
-
-However, it can sometimes be convenient to do something a that's a bit
-easier on the brain if you have a very slow modem, and you're not really
-that interested in doing things properly.
-
-A file format called @sc{soup} has been developed for transporting news
-and mail from servers to home machines and back again. It can be a bit
-fiddly.
-
-First some terminology:
-
-@table @dfn
-
-@item server
-This is the machine that is connected to the outside world and where you
-get news and/or mail from.
-
-@item home machine
-This is the machine that you want to do the actual reading and responding
-on. It is typically not connected to the rest of the world in any way.
-
-@item packet
-Something that contains messages and/or commands. There are two kinds
-of packets:
-
-@table @dfn
-@item message packets
-These are packets made at the server, and typically contain lots of
-messages for you to read. These are called @file{SoupoutX.tgz} by
-default, where @var{X} is a number.
-
-@item response packets
-These are packets made at the home machine, and typically contains
-replies that you've written. These are called @file{SoupinX.tgz} by
-default, where @var{X} is a number.
-
-@end table
-
-@end table
-
-
-@enumerate
-
-@item
-You log in on the server and create a @sc{soup} packet. You can either
-use a dedicated @sc{soup} thingie (like the @code{awk} program), or you
-can use Gnus to create the packet with its @sc{soup} commands (@kbd{O
-s} and/or @kbd{G s b}; and then @kbd{G s p}) (@pxref{SOUP Commands}).
-
-@item
-You transfer the packet home. Rail, boat, car or modem will do fine.
-
-@item
-You put the packet in your home directory.
-
-@item
-You fire up Gnus on your home machine using the @code{nnsoup} backend as
-the native or secondary server.
-
-@item
-You read articles and mail and answer and followup to the things you
-want (@pxref{SOUP Replies}).
-
-@item
-You do the @kbd{G s r} command to pack these replies into a @sc{soup}
-packet.
-
-@item
-You transfer this packet to the server.
-
-@item
-You use Gnus to mail this packet out with the @kbd{G s s} command.
-
-@item
-You then repeat until you die.
-
-@end enumerate
-
-So you basically have a bipartite system---you use @code{nnsoup} for
-reading and Gnus for packing/sending these @sc{soup} packets.
-
-@menu
-* SOUP Commands:: Commands for creating and sending @sc{soup} packets
-* SOUP Groups:: A backend for reading @sc{soup} packets.
-* SOUP Replies:: How to enable @code{nnsoup} to take over mail and news.
-@end menu
-
-
-@node SOUP Commands
-@subsubsection SOUP Commands
-
-These are commands for creating and manipulating @sc{soup} packets.
-
-@table @kbd
-@item G s b
-@kindex G s b (Group)
-@findex gnus-group-brew-soup
-Pack all unread articles in the current group
-(@code{gnus-group-brew-soup}). This command understands the
-process/prefix convention.
-
-@item G s w
-@kindex G s w (Group)
-@findex gnus-soup-save-areas
-Save all @sc{soup} data files (@code{gnus-soup-save-areas}).
-
-@item G s s
-@kindex G s s (Group)
-@findex gnus-soup-send-replies
-Send all replies from the replies packet
-(@code{gnus-soup-send-replies}).
-
-@item G s p
-@kindex G s p (Group)
-@findex gnus-soup-pack-packet
-Pack all files into a @sc{soup} packet (@code{gnus-soup-pack-packet}).
-
-@item G s r
-@kindex G s r (Group)
-@findex nnsoup-pack-replies
-Pack all replies into a replies packet (@code{nnsoup-pack-replies}).
-
-@item O s
-@kindex O s (Summary)
-@findex gnus-soup-add-article
-This summary-mode command adds the current article to a @sc{soup} packet
-(@code{gnus-soup-add-article}). It understands the process/prefix
-convention (@pxref{Process/Prefix}).
-
-@end table
-
-
-There are a few variables to customize where Gnus will put all these
-thingies:
-
-@table @code
-
-@item gnus-soup-directory
-@vindex gnus-soup-directory
-Directory where Gnus will save intermediate files while composing
-@sc{soup} packets. The default is @file{~/SoupBrew/}.
-
-@item gnus-soup-replies-directory
-@vindex gnus-soup-replies-directory
-This is what Gnus will use as a temporary directory while sending our
-reply packets. @file{~/SoupBrew/SoupReplies/} is the default.
-
-@item gnus-soup-prefix-file
-@vindex gnus-soup-prefix-file
-Name of the file where Gnus stores the last used prefix. The default is
-@samp{gnus-prefix}.
-
-@item gnus-soup-packer
-@vindex gnus-soup-packer
-A format string command for packing a @sc{soup} packet. The default is
-@samp{tar cf - %s | gzip > $HOME/Soupout%d.tgz}.
-
-@item gnus-soup-unpacker
-@vindex gnus-soup-unpacker
-Format string command for unpacking a @sc{soup} packet. The default is
-@samp{gunzip -c %s | tar xvf -}.
-
-@item gnus-soup-packet-directory
-@vindex gnus-soup-packet-directory
-Where Gnus will look for reply packets. The default is @file{~/}.
-
-@item gnus-soup-packet-regexp
-@vindex gnus-soup-packet-regexp
-Regular expression matching @sc{soup} reply packets in
-@code{gnus-soup-packet-directory}.
-
-@end table
-
-
-@node SOUP Groups
-@subsubsection @sc{soup} Groups
-@cindex nnsoup
-
-@code{nnsoup} is the backend for reading @sc{soup} packets. It will
-read incoming packets, unpack them, and put them in a directory where
-you can read them at leisure.
-
-These are the variables you can use to customize its behavior:
-
-@table @code
-
-@item nnsoup-tmp-directory
-@vindex nnsoup-tmp-directory
-When @code{nnsoup} unpacks a @sc{soup} packet, it does it in this
-directory. (@file{/tmp/} by default.)
-
-@item nnsoup-directory
-@vindex nnsoup-directory
-@code{nnsoup} then moves each message and index file to this directory.
-The default is @file{~/SOUP/}.
-
-@item nnsoup-replies-directory
-@vindex nnsoup-replies-directory
-All replies will be stored in this directory before being packed into a
-reply packet. The default is @file{~/SOUP/replies/"}.
-
-@item nnsoup-replies-format-type
-@vindex nnsoup-replies-format-type
-The @sc{soup} format of the replies packets. The default is @samp{?n}
-(rnews), and I don't think you should touch that variable. I probably
-shouldn't even have documented it. Drats! Too late!
-
-@item nnsoup-replies-index-type
-@vindex nnsoup-replies-index-type
-The index type of the replies packet. The default is @samp{?n}, which
-means ``none''. Don't fiddle with this one either!
-
-@item nnsoup-active-file
-@vindex nnsoup-active-file
-Where @code{nnsoup} stores lots of information. This is not an ``active
-file'' in the @code{nntp} sense; it's an Emacs Lisp file. If you lose
-this file or mess it up in any way, you're dead. The default is
-@file{~/SOUP/active}.
-
-@item nnsoup-packer
-@vindex nnsoup-packer
-Format string command for packing a reply @sc{soup} packet. The default
-is @samp{tar cf - %s | gzip > $HOME/Soupin%d.tgz}.
-
-@item nnsoup-unpacker
-@vindex nnsoup-unpacker
-Format string command for unpacking incoming @sc{soup} packets. The
-default is @samp{gunzip -c %s | tar xvf -}.
-
-@item nnsoup-packet-directory
-@vindex nnsoup-packet-directory
-Where @code{nnsoup} will look for incoming packets. The default is
-@file{~/}.
-
-@item nnsoup-packet-regexp
-@vindex nnsoup-packet-regexp
-Regular expression matching incoming @sc{soup} packets. The default is
-@samp{Soupout}.
-
-@item nnsoup-always-save
-@vindex nnsoup-always-save
-If non-@code{nil}, save the replies buffer after each posted message.
-
-@end table
-
-
-@node SOUP Replies
-@subsubsection SOUP Replies
-
-Just using @code{nnsoup} won't mean that your postings and mailings end
-up in @sc{soup} reply packets automagically. You have to work a bit
-more for that to happen.
-
-@findex nnsoup-set-variables
-The @code{nnsoup-set-variables} command will set the appropriate
-variables to ensure that all your followups and replies end up in the
-@sc{soup} system.
-
-In specific, this is what it does:
-
-@lisp
-(setq message-send-news-function 'nnsoup-request-post)
-(setq message-send-mail-function 'nnsoup-request-mail)
-@end lisp
-
-And that's it, really. If you only want news to go into the @sc{soup}
-system you just use the first line. If you only want mail to be
-@sc{soup}ed you use the second.
-
-
-@node Web Searches
-@subsection Web Searches
-@cindex nnweb
-@cindex DejaNews
-@cindex Alta Vista
-@cindex InReference
-@cindex Usenet searches
-@cindex searching the Usenet
-
-It's, like, too neat to search the Usenet for articles that match a
-string, but it, like, totally @emph{sucks}, like, totally, to use one of
-those, like, Web browsers, and you, like, have to, rilly, like, look at
-the commercials, so, like, with Gnus you can do @emph{rad}, rilly,
-searches without having to use a browser.
-
-The @code{nnweb} backend allows an easy interface to the mighty search
-engine. You create an @code{nnweb} group, enter a search pattern, and
-then enter the group and read the articles like you would any normal
-group. The @kbd{G w} command in the group buffer (@pxref{Foreign
-Groups}) will do this in an easy-to-use fashion.
-
-@code{nnweb} groups don't really lend themselves to being solid
-groups---they have a very fleeting idea of article numbers. In fact,
-each time you enter an @code{nnweb} group (not even changing the search
-pattern), you are likely to get the articles ordered in a different
-manner. Not even using duplicate suppression (@pxref{Duplicate
-Suppression}) will help, since @code{nnweb} doesn't even know the
-@code{Message-ID} of the articles before reading them using some search
-engines (DejaNews, for instance). The only possible way to keep track
-of which articles you've read is by scoring on the @code{Date}
-header---mark all articles posted before the last date you read the
-group as read.
-
-If the search engine changes its output substantially, @code{nnweb}
-won't be able to parse it and will fail. One could hardly fault the Web
-providers if they were to do this---their @emph{raison d'être} is to
-make money off of advertisements, not to provide services to the
-community. Since @code{nnweb} washes the ads off all the articles, one
-might think that the providers might be somewhat miffed. We'll see.
-
-You must have the @code{url} and @code{w3} package installed to be able
-to use @code{nnweb}.
-
-Virtual server variables:
-
-@table @code
-@item nnweb-type
-@vindex nnweb-type
-What search engine type is being used. The currently supported types
-are @code{dejanews}, @code{dejanewsold}, @code{altavista} and
-@code{reference}.
-
-@item nnweb-search
-@vindex nnweb-search
-The search string to feed to the search engine.
-
-@item nnweb-max-hits
-@vindex nnweb-max-hits
-Advisory maximum number of hits per search to display. The default is
-100.
-
-@item nnweb-type-definition
-@vindex nnweb-type-definition
-Type-to-definition alist. This alist says what @code{nnweb} should do
-with the various search engine types. The following elements must be
-present:
-
-@table @code
-@item article
-Function to decode the article and provide something that Gnus
-understands.
-
-@item map
-Function to create an article number to message header and URL alist.
-
-@item search
-Function to send the search string to the search engine.
-
-@item address
-The address the aforementioned function should send the search string
-to.
-
-@item id
-Format string URL to fetch an article by @code{Message-ID}.
-@end table
-
-@end table
-
-
-
-@node Mail-To-News Gateways
-@subsection Mail-To-News Gateways
-@cindex mail-to-news gateways
-@cindex gateways
-
-If your local @code{nntp} server doesn't allow posting, for some reason
-or other, you can post using one of the numerous mail-to-news gateways.
-The @code{nngateway} backend provides the interface.
-
-Note that you can't read anything from this backend---it can only be
-used to post with.
-
-Server variables:
-
-@table @code
-@item nngateway-address
-@vindex nngateway-address
-This is the address of the mail-to-news gateway.
-
-@item nngateway-header-transformation
-@vindex nngateway-header-transformation
-News headers often have to be transformed in some odd way or other
-for the mail-to-news gateway to accept it. This variable says what
-transformation should be called, and defaults to
-@code{nngateway-simple-header-transformation}. The function is called
-narrowed to the headers to be transformed and with one parameter---the
-gateway address.
-
-This default function just inserts a new @code{To} header based on the
-@code{Newsgroups} header and the gateway address.
-For instance, an article with this @code{Newsgroups} header:
-
-@example
-Newsgroups: alt.religion.emacs
-@end example
-
-will get this @code{From} header inserted:
-
-@example
-To: alt-religion-emacs@@GATEWAY
-@end example
-
-The following pre-defined functions exist:
-
-@findex nngateway-simple-header-transformation
-@table @code
-
-@item nngateway-simple-header-transformation
-Creates a @code{To} header that looks like
-@var{newsgroup}@@@code{nngateway-address}.
-
-@findex nngateway-mail2news-header-transformation
-
-@item nngateway-mail2news-header-transformation
-Creates a @code{To} header that looks like
-@code{nngateway-address}.
-
-Here's an example:
-
-@lisp
-(setq gnus-post-method
- '(nngateway "mail2news@@replay.com"
- (nngateway-header-transformation
- nngateway-mail2news-header-transformation)))
-@end lisp
-
-@end table
-
-
-@end table
-
-So, to use this, simply say something like:
-
-@lisp
-(setq gnus-post-method '(nngateway "GATEWAY.ADDRESS"))
-@end lisp
-
-
-@node Combined Groups
-@section Combined Groups
-
-Gnus allows combining a mixture of all the other group types into bigger
-groups.
-
-@menu
-* Virtual Groups:: Combining articles from many groups.
-* Kibozed Groups:: Looking through parts of the newsfeed for articles.
-@end menu
-
-
-@node Virtual Groups
-@subsection Virtual Groups
-@cindex nnvirtual
-@cindex virtual groups
-@cindex merging groups
-
-An @dfn{nnvirtual group} is really nothing more than a collection of
-other groups.
-
-For instance, if you are tired of reading many small groups, you can
-put them all in one big group, and then grow tired of reading one
-big, unwieldy group. The joys of computing!
-
-You specify @code{nnvirtual} as the method. The address should be a
-regexp to match component groups.
-
-All marks in the virtual group will stick to the articles in the
-component groups. So if you tick an article in a virtual group, the
-article will also be ticked in the component group from whence it came.
-(And vice versa---marks from the component groups will also be shown in
-the virtual group.)
-
-Here's an example @code{nnvirtual} method that collects all Andrea Dworkin
-newsgroups into one, big, happy newsgroup:
-
-@lisp
-(nnvirtual "^alt\\.fan\\.andrea-dworkin$\\|^rec\\.dworkin.*")
-@end lisp
-
-The component groups can be native or foreign; everything should work
-smoothly, but if your computer explodes, it was probably my fault.
-
-Collecting the same group from several servers might actually be a good
-idea if users have set the Distribution header to limit distribution.
-If you would like to read @samp{soc.motss} both from a server in Japan
-and a server in Norway, you could use the following as the group regexp:
-
-@example
-"^nntp\\+server\\.jp:soc\\.motss$\\|^nntp\\+server\\.no:soc\\.motss$"
-@end example
-
-(Remember, though, that if you're creating the group with @kbd{G m}, you
-shouldn't double the backslashes, and you should leave off the quote
-characters at the beginning and the end of the string.)
-
-This should work kinda smoothly---all articles from both groups should
-end up in this one, and there should be no duplicates. Threading (and
-the rest) will still work as usual, but there might be problems with the
-sequence of articles. Sorting on date might be an option here
-(@pxref{Selecting a Group}).
-
-One limitation, however---all groups included in a virtual
-group have to be alive (i.e., subscribed or unsubscribed). Killed or
-zombie groups can't be component groups for @code{nnvirtual} groups.
-
-@vindex nnvirtual-always-rescan
-If the @code{nnvirtual-always-rescan} is non-@code{nil},
-@code{nnvirtual} will always scan groups for unread articles when
-entering a virtual group. If this variable is @code{nil} (which is the
-default) and you read articles in a component group after the virtual
-group has been activated, the read articles from the component group
-will show up when you enter the virtual group. You'll also see this
-effect if you have two virtual groups that have a component group in
-common. If that's the case, you should set this variable to @code{t}.
-Or you can just tap @code{M-g} on the virtual group every time before
-you enter it---it'll have much the same effect.
-
-@code{nnvirtual} can have both mail and news groups as component groups.
-When responding to articles in @code{nnvirtual} groups, @code{nnvirtual}
-has to ask the backend of the component group the article comes from
-whether it is a news or mail backend. However, when you do a @kbd{^},
-there is typically no sure way for the component backend to know this,
-and in that case @code{nnvirtual} tells Gnus that the article came from a
-not-news backend. (Just to be on the safe side.)
-
-@kbd{C-c C-t} in the message buffer will insert the @code{Newsgroups}
-line from the article you respond to in these cases.
-
-
-
-@node Kibozed Groups
-@subsection Kibozed Groups
-@cindex nnkiboze
-@cindex kibozing
-
-@dfn{Kibozing} is defined by @sc{oed} as ``grepping through (parts of)
-the news feed''. @code{nnkiboze} is a backend that will do this for
-you. Oh joy! Now you can grind any @sc{nntp} server down to a halt
-with useless requests! Oh happiness!
-
-@kindex G k (Group)
-To create a kibozed group, use the @kbd{G k} command in the group
-buffer.
-
-The address field of the @code{nnkiboze} method is, as with
-@code{nnvirtual}, a regexp to match groups to be ``included'' in the
-@code{nnkiboze} group. That's where most similarities between @code{nnkiboze}
-and @code{nnvirtual} end.
-
-In addition to this regexp detailing component groups, an @code{nnkiboze} group
-must have a score file to say what articles are to be included in
-the group (@pxref{Scoring}).
-
-@kindex M-x nnkiboze-generate-groups
-@findex nnkiboze-generate-groups
-You must run @kbd{M-x nnkiboze-generate-groups} after creating the
-@code{nnkiboze} groups you want to have. This command will take time. Lots of
-time. Oodles and oodles of time. Gnus has to fetch the headers from
-all the articles in all the component groups and run them through the
-scoring process to determine if there are any articles in the groups
-that are to be part of the @code{nnkiboze} groups.
-
-Please limit the number of component groups by using restrictive
-regexps. Otherwise your sysadmin may become annoyed with you, and the
-@sc{nntp} site may throw you off and never let you back in again.
-Stranger things have happened.
-
-@code{nnkiboze} component groups do not have to be alive---they can be dead,
-and they can be foreign. No restrictions.
-
-@vindex nnkiboze-directory
-The generation of an @code{nnkiboze} group means writing two files in
-@code{nnkiboze-directory}, which is @file{~/News/} by default. One
-contains the @sc{nov} header lines for all the articles in the group,
-and the other is an additional @file{.newsrc} file to store information
-on what groups have been searched through to find component articles.
-
-Articles marked as read in the @code{nnkiboze} group will have
-their @sc{nov} lines removed from the @sc{nov} file.
-
-
-@node Gnus Unplugged
-@section Gnus Unplugged
-@cindex offline
-@cindex unplugged
-@cindex Agent
-@cindex Gnus Agent
-@cindex Gnus Unplugged
-
-In olden times (ca. February '88), people used to run their newsreaders
-on big machines with permanent connections to the net. News transport
-was dealt with by news servers, and all the newsreaders had to do was to
-read news. Believe it or not.
-
-Nowadays most people read news and mail at home, and use some sort of
-modem to connect to the net. To avoid running up huge phone bills, it
-would be nice to have a way to slurp down all the news and mail, hang up
-the phone, read for several hours, and then upload any responses you
-have to make. And then you repeat the procedure.
-
-Of course, you can use news servers for doing this as well. I've used
-@code{inn} together with @code{slurp}, @code{pop} and @code{sendmail}
-for some years, but doing that's a bore. Moving the news server
-functionality up to the newsreader makes sense if you're the only person
-reading news on a machine.
-
-Using Gnus as an ``offline'' newsreader is quite simple.
-
-@itemize @bullet
-@item
-First, set up Gnus as you would do if you were running it on a machine
-that has full connection to the net. Go ahead. I'll still be waiting
-here.
-
-@item
-Then, put the following magical incantation at the end of your
-@file{.gnus.el} file:
-
-@lisp
-(gnus-agentize)
-@end lisp
-@end itemize
-
-That's it. Gnus is now an ``offline'' newsreader.
-
-Of course, to use it as such, you have to learn a few new commands.
-
-@menu
-* Agent Basics:: How it all is supposed to work.
-* Agent Categories:: How to tell the Gnus Agent what to download.
-* Agent Commands:: New commands for all the buffers.
-* Agent Expiry:: How to make old articles go away.
-* Outgoing Messages:: What happens when you post/mail something?
-* Agent Variables:: Customizing is fun.
-* Example Setup:: An example @file{.gnus.el} file for offline people.
-* Batching Agents:: How to fetch news from a @code{cron} job.
-* Agent Caveats:: What you think it'll do and what it does.
-@end menu
-
-
-@node Agent Basics
-@subsection Agent Basics
-
-First, let's get some terminology out of the way.
-
-The Gnus Agent is said to be @dfn{unplugged} when you have severed the
-connection to the net (and notified the Agent that this is the case).
-When the connection to the net is up again (and Gnus knows this), the
-Agent is @dfn{plugged}.
-
-The @dfn{local} machine is the one you're running on, and which isn't
-connected to the net continuously.
-
-@dfn{Downloading} means fetching things from the net to your local
-machine. @dfn{Uploading} is doing the opposite.
-
-Let's take a typical Gnus session using the Agent.
-
-@itemize @bullet
-
-@item
-You start Gnus with @code{gnus-unplugged}. This brings up the Gnus
-Agent in a disconnected state. You can read all the news that you have
-already fetched while in this mode.
-
-@item
-You then decide to see whether any new news has arrived. You connect
-your machine to the net (using PPP or whatever), and then hit @kbd{J j}
-to make Gnus become @dfn{plugged}.
-
-@item
-You can then read the new news immediately, or you can download the news
-onto your local machine. If you want to do the latter, you press @kbd{J
-s} to fetch all the eligible articles in all the groups. (To let Gnus
-know which articles you want to download, @pxref{Agent Categories}.)
-
-@item
-After fetching the articles, you press @kbd{J j} to make Gnus become
-unplugged again, and you shut down the PPP thing (or whatever). And
-then you read the news offline.
-
-@item
-And then you go to step 2.
-@end itemize
-
-Here are some things you should do the first time (or so) that you use
-the Agent.
-
-@itemize @bullet
-
-@item
-Decide which servers should be covered by the Agent. If you have a mail
-backend, it would probably be nonsensical to have it covered by the
-Agent. Go to the server buffer (@kbd{^} in the group buffer) and press
-@kbd{J a} the server (or servers) that you wish to have covered by the
-Agent (@pxref{Server Agent Commands}). This will typically be only the
-primary select method, which is listed on the bottom in the buffer.
-
-@item
-Decide on download policy. @xref{Agent Categories}.
-
-@item
-Uhm... that's it.
-@end itemize
-
-
-@node Agent Categories
-@subsection Agent Categories
-
-One of the main reasons to integrate the news transport layer into the
-newsreader is to allow greater control over what articles to download.
-There's not much point in downloading huge amounts of articles, just to
-find out that you're not interested in reading any of them. It's better
-to be somewhat more conservative in choosing what to download, and then
-mark the articles for downloading manually if it should turn out that
-you're interested in the articles anyway.
-
-The main way to control what is to be downloaded is to create a
-@dfn{category} and then assign some (or all) groups to this category.
-Gnus has its own buffer for creating and managing categories.
-
-@menu
-* Category Syntax:: What a category looks like.
-* The Category Buffer:: A buffer for maintaining categories.
-* Category Variables:: Customize'r'Us.
-@end menu
-
-
-@node Category Syntax
-@subsubsection Category Syntax
-
-A category consists of two things.
-
-@enumerate
-@item
-A predicate which (generally) gives a rough outline of which articles
-are eligible for downloading; and
-
-@item
-a score rule which (generally) gives you a finer granularity when
-deciding what articles to download. (Note that this @dfn{download
-score} is not necessarily related to normal scores.)
-@end enumerate
-
-A predicate in its simplest form can be a single predicate such as
-@code{true} or @code{false}. These two will download every available
-article or nothing respectively. In the case of these two special
-predicates an additional score rule is superfluous.
-
-Predicates of @code{high} or @code{low} download articles in respect of
-their scores in relationship to @code{gnus-agent-high-score} and
-@code{gnus-agent-low-score} as descibed below.
-
-To gain even finer control of what is to be regarded eligible for
-download a predicate can consist of a number of predicates with logical
-operators sprinkled in between.
-
-Perhaps some examples are in order.
-
-Here's a simple predicate. (It's the default predicate, in fact, used
-for all groups that don't belong to any other category.)
-
-@lisp
-short
-@end lisp
-
-Quite simple, eh? This predicate is true if and only if the article is
-short (for some value of ``short'').
-
-Here's a more complex predicate:
-
-@lisp
-(or high
- (and
- (not low)
- (not long)))
-@end lisp
-
-This means that an article should be downloaded if it has a high score,
-or if the score is not low and the article is not long. You get the
-drift.
-
-The available logical operators are @code{or}, @code{and} and
-@code{not}. (If you prefer, you can use the more ``C''-ish operators
-@samp{|}, @code{&} and @code{!} instead.)
-
-The following predicates are pre-defined, but if none of these fit what
-you want to do, you can write your own.
-
-@table @code
-@item short
-True iff the article is shorter than @code{gnus-agent-short-article}
-lines; default 100.
-
-@item long
-True iff the article is longer than @code{gnus-agent-long-article}
-lines; default 200.
-
-@item low
-True iff the article has a download score less than
-@code{gnus-agent-low-score}; default 0.
-
-@item high
-True iff the article has a download score greater than
-@code{gnus-agent-high-score}; default 0.
-
-@item spam
-True iff the Gnus Agent guesses that the article is spam. The
-heuristics may change over time, but at present it just computes a
-checksum and sees whether articles match.
-
-@item true
-Always true.
-
-@item false
-Always false.
-@end table
-
-If you want to create your own predicate function, here's what you have
-to know: The functions are called with no parameters, but the
-@code{gnus-headers} and @code{gnus-score} dynamic variables are bound to
-useful values.
-
-For example, you could decide that you don't want to download articles
-that were posted more than a certain number of days ago (e.g. posted
-more than @code{gnus-agent-expire-days} ago) you might write a function
-something along the lines of the following:
-
-@lisp
-(defun my-article-old-p ()
- "Say whether an article is old."
- (< (time-to-day (date-to-time (mail-header-date gnus-headers)))
- (- (time-to-day (current-time)) gnus-agent-expire-days)))
-@end lisp
-
-with the predicate then defined as:
-
-@lisp
-(not my-article-old-p)
-@end lisp
-
-or you could append your predicate to the predefined
-@code{gnus-category-predicate-alist} in your @file{~/.gnus.el} or
-wherever. (Note: this would have to be at a point *after*
-@code{gnus-agent} has been loaded via @code{(gnus-agentize)})
-
-@lisp
-(defvar gnus-category-predicate-alist
- (append gnus-category-predicate-alist
- '((old . my-article-old-p))))
-@end lisp
-
-and simply specify your predicate as:
-
-@lisp
-(not old)
-@end lisp
-
-If/when using something like the above, be aware that there are many
-misconfigured systems/mailers out there and so an article's date is not
-always a reliable indication of when it was posted. Hell, some people
-just don't give a damm.
-
-
-The above predicates apply to *all* the groups which belong to the
-category. However, if you wish to have a specific predicate for an
-individual group within a category, or you're just too lazy to set up a
-new category, you can enter a group's individual predicate in it's group
-parameters like so:
-
-@lisp
-(agent-predicate . short)
-@end lisp
-
-This is the group parameter equivalent of the agent category
-default. Note that when specifying a single word predicate like this,
-the @code{agent-predicate} specification must be in dotted pair
-notation.
-
-The equivalent of the longer example from above would be:
-
-@lisp
-(agent-predicate or high (and (not low) (not long)))
-@end lisp
-
-The outer parenthesis required in the category specification are not
-entered here as, not being in dotted pair notation, the value of the
-predicate is assumed to be a list.
-
-
-Now, the syntax of the download score is the same as the syntax of
-normal score files, except that all elements that require actually
-seeing the article itself are verboten. This means that only the
-following headers can be scored on: @code{Subject}, @code{From},
-@code{Date}, @code{Message-ID}, @code{References}, @code{Chars},
-@code{Lines}, and @code{Xref}.
-
-As with predicates, the specification of the @code{download score rule}
-to use in respect of a group can be in either the category definition if
-it's to be applicable to all groups in therein, or a group's parameters
-if it's to be specific to that group.
-
-In both of these places the @code{download score rule} can take one of
-three forms:
-
-@enumerate
-@item
-Score rule
-
-This has the same syntax as a normal gnus score file except only a
-subset of scoring keywords are available as mentioned above.
-
-example:
-
-@itemize @bullet
-@item
-Category specification
-
-@lisp
-(("from"
- ("Lars Ingebrigtsen" 1000000 nil s))
-("lines"
- (500 -100 nil <)))
-@end lisp
-
-@item
-Group Parameter specification
-
-@lisp
-(agent-score ("from"
- ("Lars Ingebrigtsen" 1000000 nil s))
- ("lines"
- (500 -100 nil <)))
-@end lisp
-
-Again, note the omission of the outermost parenthesis here.
-@end itemize
-
-@item
-Agent score file
-
-These score files must *only* contain the permitted scoring keywords
-stated above.
-
-example:
-
-@itemize @bullet
-@item
-Category specification
-
-@lisp
-("~/News/agent.SCORE")
-@end lisp
-
-or perhaps
-
-@lisp
-("~/News/agent.SCORE" "~/News/agent.group.SCORE")
-@end lisp
-
-@item
-Group Parameter specification
-
-@lisp
-(agent-score "~/News/agent.SCORE")
-@end lisp
-
-Additional score files can be specified as above. Need I say anything
-about parenthesis.
-@end itemize
-
-@item
-Use @code{normal} score files
-
-If you dont want to maintain two sets of scoring rules for a group, and
-your desired @code{downloading} criteria for a group are the same as your
-@code{reading} criteria then you can tell the agent to refer to your
-@code{normal} score files when deciding what to download.
-
-These directives in either the category definition or a group's
-parameters will cause the agent to read in all the applicable score
-files for a group, *filtering out* those those sections that do not
-relate to one of the permitted subset of scoring keywords.
-
-@itemize @bullet
-@item
-Category Specification
-
-@lisp
-file
-@end lisp
-
-@item
-Group Parameter specification
-
-@lisp
-(agent-score . file)
-@end lisp
-@end itemize
-@end enumerate
-
-@node The Category Buffer
-@subsubsection The Category Buffer
-
-You'd normally do all category maintenance from the category buffer.
-When you enter it for the first time (with the @kbd{J c} command from
-the group buffer), you'll only see the @code{default} category.
-
-The following commands are available in this buffer:
-
-@table @kbd
-@item q
-@kindex q (Category)
-@findex gnus-category-exit
-Return to the group buffer (@code{gnus-category-exit}).
-
-@item k
-@kindex k (Category)
-@findex gnus-category-kill
-Kill the current category (@code{gnus-category-kill}).
-
-@item c
-@kindex c (Category)
-@findex gnus-category-copy
-Copy the current category (@code{gnus-category-copy}).
-
-@item a
-@kindex a (Category)
-@findex gnus-category-add
-Add a new category (@code{gnus-category-add}).
-
-@item p
-@kindex p (Category)
-@findex gnus-category-edit-predicate
-Edit the predicate of the current category
-(@code{gnus-category-edit-predicate}).
-
-@item g
-@kindex g (Category)
-@findex gnus-category-edit-groups
-Edit the list of groups belonging to the current category
-(@code{gnus-category-edit-groups}).
-
-@item s
-@kindex s (Category)
-@findex gnus-category-edit-score
-Edit the download score rule of the current category
-(@code{gnus-category-edit-score}).
-
-@item l
-@kindex l (Category)
-@findex gnus-category-list
-List all the categories (@code{gnus-category-list}).
-@end table
-
-
-@node Category Variables
-@subsubsection Category Variables
-
-@table @code
-@item gnus-category-mode-hook
-@vindex gnus-category-mode-hook
-Hook run in category buffers.
-
-@item gnus-category-line-format
-@vindex gnus-category-line-format
-Format of the lines in the category buffer (@pxref{Formatting
-Variables}). Valid elements are:
-
-@table @samp
-@item c
-The name of the category.
-
-@item g
-The number of groups in the category.
-@end table
-
-@item gnus-category-mode-line-format
-@vindex gnus-category-mode-line-format
-Format of the category mode line (@pxref{Mode Line Formatting}).
-
-@item gnus-agent-short-article
-@vindex gnus-agent-short-article
-Articles that have fewer lines than this are short. Default 100.
-
-@item gnus-agent-long-article
-@vindex gnus-agent-long-article
-Articles that have more lines than this are long. Default 200.
-
-@item gnus-agent-low-score
-@vindex gnus-agent-low-score
-Articles that have a score lower than this have a low score. Default
-0.
-
-@item gnus-agent-high-score
-@vindex gnus-agent-high-score
-Articles that have a score higher than this have a high score. Default
-0.
-
-@end table
-
-
-@node Agent Commands
-@subsection Agent Commands
-
-All the Gnus Agent commands are on the @kbd{J} submap. The @kbd{J j}
-(@code{gnus-agent-toggle-plugged} command works in all modes, and
-toggles the plugged/unplugged state of the Gnus Agent.
-
-
-@menu
-* Group Agent Commands::
-* Summary Agent Commands::
-* Server Agent Commands::
-@end menu
-
-You can run a complete batch fetch from the command line with the
-following incantation:
-
-@cindex gnus-agent-batch-fetch
-@example
-$ emacs -batch -l ~/.gnus.el -f gnus-agent-batch-fetch
-@end example
-
-
-
-@node Group Agent Commands
-@subsubsection Group Agent Commands
-
-@table @kbd
-@item J u
-@kindex J u (Agent Group)
-@findex gnus-agent-fetch-groups
-Fetch all eligible articles in the current group
-(@code{gnus-agent-fetch-groups}).
-
-@item J c
-@kindex J c (Agent Group)
-@findex gnus-enter-category-buffer
-Enter the Agent category buffer (@code{gnus-enter-category-buffer}).
-
-@item J s
-@kindex J s (Agent Group)
-@findex gnus-agent-fetch-session
-Fetch all eligible articles in all groups
-(@code{gnus-agent-fetch-session}).
-
-@item J S
-@kindex J S (Agent Group)
-@findex gnus-group-send-drafts
-Send all sendable messages in the draft group
-(@code{gnus-agent-fetch-session}). @xref{Drafts}.
-
-@item J a
-@kindex J a (Agent Group)
-@findex gnus-agent-add-group
-Add the current group to an Agent category
-(@code{gnus-agent-add-group}).
-
-@end table
-
-
-@node Summary Agent Commands
-@subsubsection Summary Agent Commands
-
-@table @kbd
-@item J #
-@kindex J # (Agent Summary)
-@findex gnus-agent-mark-article
-Mark the article for downloading (@code{gnus-agent-mark-article}).
-
-@item J M-#
-@kindex J M-# (Agent Summary)
-@findex gnus-agent-unmark-article
-Remove the downloading mark from the article
-(@code{gnus-agent-unmark-article}).
-
-@item @@
-@kindex @@ (Agent Summary)
-@findex gnus-agent-toggle-mark
-Toggle whether to download the article (@code{gnus-agent-toggle-mark}).
-
-@item J c
-@kindex J c (Agent Summary)
-@findex gnus-agent-catchup
-Mark all undownloaded articles as read (@code{gnus-agent-catchup}).
-
-@end table
-
-
-@node Server Agent Commands
-@subsubsection Server Agent Commands
-
-@table @kbd
-@item J a
-@kindex J a (Agent Server)
-@findex gnus-agent-add-server
-Add the current server to the list of servers covered by the Gnus Agent
-(@code{gnus-agent-add-server}).
-
-@item J r
-@kindex J r (Agent Server)
-@findex gnus-agent-remove-server
-Remove the current server from the list of servers covered by the Gnus
-Agent (@code{gnus-agent-remove-server}).
-
-@end table
-
-
-@node Agent Expiry
-@subsection Agent Expiry
-
-@vindex gnus-agent-expire-days
-@findex gnus-agent-expire
-@kindex M-x gnus-agent-expire
-@cindex Agent expiry
-@cindex Gnus Agent expiry
-@cindex expiry
-
-@code{nnagent} doesn't handle expiry. Instead, there's a special
-@code{gnus-agent-expire} command that will expire all read articles that
-are older than @code{gnus-agent-expire-days} days. It can be run
-whenever you feel that you're running out of space. It's not
-particularly fast or efficient, and it's not a particularly good idea to
-interrupt it (with @kbd{C-g} or anything else) once you've started it.
-
-@vindex gnus-agent-expire-all
-if @code{gnus-agent-expire-all} is non-@code{nil}, this command will
-expire all articles---unread, read, ticked and dormant. If @code{nil}
-(which is the default), only read articles are eligible for expiry, and
-unread, ticked and dormant articles will be kept indefinitely.
-
-
-@node Outgoing Messages
-@subsection Outgoing Messages
-
-When Gnus is unplugged, all outgoing messages (both mail and news) are
-stored in the draft groups (@pxref{Drafts}). You can view them there
-after posting, and edit them at will.
-
-When Gnus is plugged again, you can send the messages either from the
-draft group with the special commands available there, or you can use
-the @kbd{J S} command in the group buffer to send all the sendable
-messages in the draft group.
-
-
-
-@node Agent Variables
-@subsection Agent Variables
-
-@table @code
-@item gnus-agent-directory
-@vindex gnus-agent-directory
-Where the Gnus Agent will store its files. The default is
-@file{~/News/agent/}.
-
-@item gnus-agent-handle-level
-@vindex gnus-agent-handle-level
-Groups on levels (@pxref{Group Levels}) higher than this variable will
-be ignored by the Agent. The default is @code{gnus-level-subscribed},
-which means that only subscribed group will be considered by the Agent
-by default.
-
-@item gnus-agent-plugged-hook
-@vindex gnus-agent-plugged-hook
-Hook run when connecting to the network.
-
-@item gnus-agent-unplugged-hook
-@vindex gnus-agent-unplugged-hook
-Hook run when disconnecting from the network.
-
-@end table
-
-
-@node Example Setup
-@subsection Example Setup
-
-If you don't want to read this manual, and you have a fairly standard
-setup, you may be able to use something like the following as your
-@file{.gnus.el} file to get started.
-
-@lisp
-;;; Define how Gnus is to fetch news. We do this over NNTP
-;;; from your ISP's server.
-(setq gnus-select-method '(nntp "nntp.your-isp.com"))
-
-;;; Define how Gnus is to read your mail. We read mail from
-;;; your ISP's POP server.
-(setenv "MAILHOST" "pop.your-isp.com")
-(setq nnmail-spool-file "po:username")
-
-;;; Say how Gnus is to store the mail. We use nnml groups.
-(setq gnus-secondary-select-methods '((nnml "")))
-
-;;; Make Gnus into an offline newsreader.
-(gnus-agentize)
-@end lisp
-
-That should be it, basically. Put that in your @file{~/.gnus.el} file,
-edit to suit your needs, start up PPP (or whatever), and type @kbd{M-x
-gnus}.
-
-If this is the first time you've run Gnus, you will be subscribed
-automatically to a few default newsgroups. You'll probably want to
-subscribe to more groups, and to do that, you have to query the
-@sc{nntp} server for a complete list of groups with the @kbd{A A}
-command. This usually takes quite a while, but you only have to do it
-once.
-
-After reading and parsing a while, you'll be presented with a list of
-groups. Subscribe to the ones you want to read with the @kbd{u}
-command. @kbd{l} to make all the killed groups disappear after you've
-subscribe to all the groups you want to read. (@kbd{A k} will bring
-back all the killed groups.)
-
-You can now read the groups at once, or you can download the articles
-with the @kbd{J s} command. And then read the rest of this manual to
-find out which of the other gazillion things you want to customize.
-
-
-@node Batching Agents
-@subsection Batching Agents
-
-Having the Gnus Agent fetch articles (and post whatever messages you've
-written) is quite easy once you've gotten things set up properly. The
-following shell script will do everything that is necessary:
-
-@example
-#!/bin/sh
-emacs -batch -l ~/.emacs -f gnus-agent-batch >/dev/null
-@end example
-
-
-@node Agent Caveats
-@subsection Agent Caveats
-
-The Gnus Agent doesn't seem to work like most other offline
-newsreaders. Here are some common questions that some imaginary people
-may ask:
-
-@table @dfn
-@item If I read an article while plugged, do they get entered into the
-Agent?
-
-@strong{No.}
-
-@item If I read an article while plugged, and the article already exists
-in the Agent, will it get downloaded once more?
-
-@strong{Yes.}
-
-@end table
-
-In short, when Gnus is unplugged, it only looks into the locally stored
-articles; when it's plugged, it only talks to your ISP.
-
-
-@node Scoring
-@chapter Scoring
-@cindex scoring
-
-Other people use @dfn{kill files}, but we here at Gnus Towers like
-scoring better than killing, so we'd rather switch than fight. They do
-something completely different as well, so sit up straight and pay
-attention!
-
-@vindex gnus-summary-mark-below
-All articles have a default score (@code{gnus-summary-default-score}),
-which is 0 by default. This score may be raised or lowered either
-interactively or by score files. Articles that have a score lower than
-@code{gnus-summary-mark-below} are marked as read.
-
-Gnus will read any @dfn{score files} that apply to the current group
-before generating the summary buffer.
-
-There are several commands in the summary buffer that insert score
-entries based on the current article. You can, for instance, ask Gnus to
-lower or increase the score of all articles with a certain subject.
-
-There are two sorts of scoring entries: Permanent and temporary.
-Temporary score entries are self-expiring entries. Any entries that are
-temporary and have not been used for, say, a week, will be removed
-silently to help keep the sizes of the score files down.
-
-@menu
-* Summary Score Commands:: Adding score entries for the current group.
-* Group Score Commands:: General score commands.
-* Score Variables:: Customize your scoring. (My, what terminology).
-* Score File Format:: What a score file may contain.
-* Score File Editing:: You can edit score files by hand as well.
-* Adaptive Scoring:: Big Sister Gnus knows what you read.
-* Home Score File:: How to say where new score entries are to go.
-* Followups To Yourself:: Having Gnus notice when people answer you.
-* Scoring Tips:: How to score effectively.
-* Reverse Scoring:: That problem child of old is not problem.
-* Global Score Files:: Earth-spanning, ear-splitting score files.
-* Kill Files:: They are still here, but they can be ignored.
-* Converting Kill Files:: Translating kill files to score files.
-* GroupLens:: Getting predictions on what you like to read.
-* Advanced Scoring:: Using logical expressions to build score rules.
-* Score Decays:: It can be useful to let scores wither away.
-@end menu
-
-
-@node Summary Score Commands
-@section Summary Score Commands
-@cindex score commands
-
-The score commands that alter score entries do not actually modify real
-score files. That would be too inefficient. Gnus maintains a cache of
-previously loaded score files, one of which is considered the
-@dfn{current score file alist}. The score commands simply insert
-entries into this list, and upon group exit, this list is saved.
-
-The current score file is by default the group's local score file, even
-if no such score file actually exists. To insert score commands into
-some other score file (e.g. @file{all.SCORE}), you must first make this
-score file the current one.
-
-General score commands that don't actually change the score file:
-
-@table @kbd
-
-@item V s
-@kindex V s (Summary)
-@findex gnus-summary-set-score
-Set the score of the current article (@code{gnus-summary-set-score}).
-
-@item V S
-@kindex V S (Summary)
-@findex gnus-summary-current-score
-Display the score of the current article
-(@code{gnus-summary-current-score}).
-
-@item V t
-@kindex V t (Summary)
-@findex gnus-score-find-trace
-Display all score rules that have been used on the current article
-(@code{gnus-score-find-trace}).
-
-@item V R
-@kindex V R (Summary)
-@findex gnus-summary-rescore
-Run the current summary through the scoring process
-(@code{gnus-summary-rescore}). This might be useful if you're playing
-around with your score files behind Gnus' back and want to see the
-effect you're having.
-
-@item V c
-@kindex V c (Summary)
-@findex gnus-score-change-score-file
-Make a different score file the current
-(@code{gnus-score-change-score-file}).
-
-@item V e
-@kindex V e (Summary)
-@findex gnus-score-edit-current-scores
-Edit the current score file (@code{gnus-score-edit-current-scores}).
-You will be popped into a @code{gnus-score-mode} buffer (@pxref{Score
-File Editing}).
-
-@item V f
-@kindex V f (Summary)
-@findex gnus-score-edit-file
-Edit a score file and make this score file the current one
-(@code{gnus-score-edit-file}).
-
-@item V F
-@kindex V F (Summary)
-@findex gnus-score-flush-cache
-Flush the score cache (@code{gnus-score-flush-cache}). This is useful
-after editing score files.
-
-@item V C
-@kindex V C (Summary)
-@findex gnus-score-customize
-Customize a score file in a visually pleasing manner
-(@code{gnus-score-customize}).
-
-@end table
-
-The rest of these commands modify the local score file.
-
-@table @kbd
-
-@item V m
-@kindex V m (Summary)
-@findex gnus-score-set-mark-below
-Prompt for a score, and mark all articles with a score below this as
-read (@code{gnus-score-set-mark-below}).
-
-@item V x
-@kindex V x (Summary)
-@findex gnus-score-set-expunge-below
-Prompt for a score, and add a score rule to the current score file to
-expunge all articles below this score
-(@code{gnus-score-set-expunge-below}).
-@end table
-
-The keystrokes for actually making score entries follow a very regular
-pattern, so there's no need to list all the commands. (Hundreds of
-them.)
-
-@findex gnus-summary-increase-score
-@findex gnus-summary-lower-score
-
-@enumerate
-@item
-The first key is either @kbd{I} (upper case i) for increasing the score
-or @kbd{L} for lowering the score.
-@item
-The second key says what header you want to score on. The following
-keys are available:
-@table @kbd
-
-@item a
-Score on the author name.
-
-@item s
-Score on the subject line.
-
-@item x
-Score on the Xref line---i.e., the cross-posting line.
-
-@item r
-Score on the References line.
-
-@item d
-Score on the date.
-
-@item l
-Score on the number of lines.
-
-@item i
-Score on the Message-ID.
-
-@item f
-Score on followups.
-
-@item b
-Score on the body.
-
-@item h
-Score on the head.
-
-@item t
-Score on thead.
-
-@end table
-
-@item
-The third key is the match type. Which match types are valid depends on
-what headers you are scoring on.
-
-@table @code
-
-@item strings
-
-@table @kbd
-
-@item e
-Exact matching.
-
-@item s
-Substring matching.
-
-@item f
-Fuzzy matching (@pxref{Fuzzy Matching}).
-
-@item r
-Regexp matching
-@end table
-
-@item date
-@table @kbd
-
-@item b
-Before date.
-
-@item a
-After date.
-
-@item n
-This date.
-@end table
-
-@item number
-@table @kbd
-
-@item <
-Less than number.
-
-@item =
-Equal to number.
-
-@item >
-Greater than number.
-@end table
-@end table
-
-@item
-The fourth and final key says whether this is a temporary (i.e., expiring)
-score entry, or a permanent (i.e., non-expiring) score entry, or whether
-it is to be done immediately, without adding to the score file.
-@table @kbd
-
-@item t
-Temporary score entry.
-
-@item p
-Permanent score entry.
-
-@item i
-Immediately scoring.
-@end table
-
-@end enumerate
-
-So, let's say you want to increase the score on the current author with
-exact matching permanently: @kbd{I a e p}. If you want to lower the
-score based on the subject line, using substring matching, and make a
-temporary score entry: @kbd{L s s t}. Pretty easy.
-
-To make things a bit more complicated, there are shortcuts. If you use
-a capital letter on either the second or third keys, Gnus will use
-defaults for the remaining one or two keystrokes. The defaults are
-``substring'' and ``temporary''. So @kbd{I A} is the same as @kbd{I a s
-t}, and @kbd{I a R} is the same as @kbd{I a r t}.
-
-These functions take both the numerical prefix and the symbolic prefix
-(@pxref{Symbolic Prefixes}). A numerical prefix says how much to lower
-(or increase) the score of the article. A symbolic prefix of @code{a}
-says to use the @file{all.SCORE} file for the command instead of the
-current score file.
-
-@vindex gnus-score-mimic-keymap
-The @code{gnus-score-mimic-keymap} says whether these commands will
-pretend they are keymaps or not.
-
-
-@node Group Score Commands
-@section Group Score Commands
-@cindex group score commands
-
-There aren't many of these as yet, I'm afraid.
-
-@table @kbd
-
-@item W f
-@kindex W f (Group)
-@findex gnus-score-flush-cache
-Gnus maintains a cache of score alists to avoid having to reload them
-all the time. This command will flush the cache
-(@code{gnus-score-flush-cache}).
-
-@end table
-
-You can do scoring from the command line by saying something like:
-
-@findex gnus-batch-score
-@cindex batch scoring
-@example
-$ emacs -batch -l ~/.emacs -l ~/.gnus.el -f gnus-batch-score
-@end example
-
-
-@node Score Variables
-@section Score Variables
-@cindex score variables
-
-@table @code
-
-@item gnus-use-scoring
-@vindex gnus-use-scoring
-If @code{nil}, Gnus will not check for score files, and will not, in
-general, do any score-related work. This is @code{t} by default.
-
-@item gnus-kill-killed
-@vindex gnus-kill-killed
-If this variable is @code{nil}, Gnus will never apply score files to
-articles that have already been through the kill process. While this
-may save you lots of time, it also means that if you apply a kill file
-to a group, and then change the kill file and want to run it over you
-group again to kill more articles, it won't work. You have to set this
-variable to @code{t} to do that. (It is @code{t} by default.)
-
-@item gnus-kill-files-directory
-@vindex gnus-kill-files-directory
-All kill and score files will be stored in this directory, which is
-initialized from the @code{SAVEDIR} environment variable by default.
-This is @file{~/News/} by default.
-
-@item gnus-score-file-suffix
-@vindex gnus-score-file-suffix
-Suffix to add to the group name to arrive at the score file name
-(@samp{SCORE} by default.)
-
-@item gnus-score-uncacheable-files
-@vindex gnus-score-uncacheable-files
-@cindex score cache
-All score files are normally cached to avoid excessive re-loading of
-score files. However, if this might make you Emacs grow big and
-bloated, so this regexp can be used to weed out score files unlikely to be needed again. It would be a bad idea to deny caching of
-@file{all.SCORE}, while it might be a good idea to not cache
-@file{comp.infosystems.www.authoring.misc.ADAPT}. In fact, this
-variable is @samp{ADAPT$} by default, so no adaptive score files will
-be cached.
-
-@item gnus-save-score
-@vindex gnus-save-score
-If you have really complicated score files, and do lots of batch
-scoring, then you might set this variable to @code{t}. This will make
-Gnus save the scores into the @file{.newsrc.eld} file.
-
-@item gnus-score-interactive-default-score
-@vindex gnus-score-interactive-default-score
-Score used by all the interactive raise/lower commands to raise/lower
-score with. Default is 1000, which may seem excessive, but this is to
-ensure that the adaptive scoring scheme gets enough room to play with.
-We don't want the small changes from the adaptive scoring to overwrite
-manually entered data.
-
-@item gnus-summary-default-score
-@vindex gnus-summary-default-score
-Default score of an article, which is 0 by default.
-
-@item gnus-summary-expunge-below
-@vindex gnus-summary-expunge-below
-Don't display the summary lines of articles that have scores lower than
-this variable. This is @code{nil} by default, which means that no
-articles will be hidden. This variable is local to the summary buffers,
-and has to be set from @code{gnus-summary-mode-hook}.
-
-@item gnus-score-over-mark
-@vindex gnus-score-over-mark
-Mark (in the third column) used for articles with a score over the
-default. Default is @samp{+}.
-
-@item gnus-score-below-mark
-@vindex gnus-score-below-mark
-Mark (in the third column) used for articles with a score below the
-default. Default is @samp{-}.
-
-@item gnus-score-find-score-files-function
-@vindex gnus-score-find-score-files-function
-Function used to find score files for the current group. This function
-is called with the name of the group as the argument.
-
-Predefined functions available are:
-@table @code
-
-@item gnus-score-find-single
-@findex gnus-score-find-single
-Only apply the group's own score file.
-
-@item gnus-score-find-bnews
-@findex gnus-score-find-bnews
-Apply all score files that match, using bnews syntax. This is the
-default. If the current group is @samp{gnu.emacs.gnus}, for instance,
-@file{all.emacs.all.SCORE}, @file{not.alt.all.SCORE} and
-@file{gnu.all.SCORE} would all apply. In short, the instances of
-@samp{all} in the score file names are translated into @samp{.*}, and
-then a regexp match is done.
-
-This means that if you have some score entries that you want to apply to
-all groups, then you put those entries in the @file{all.SCORE} file.
-
-The score files are applied in a semi-random order, although Gnus will
-try to apply the more general score files before the more specific score
-files. It does this by looking at the number of elements in the score
-file names---discarding the @samp{all} elements.
-
-@item gnus-score-find-hierarchical
-@findex gnus-score-find-hierarchical
-Apply all score files from all the parent groups. This means that you
-can't have score files like @file{all.SCORE}, but you can have
-@file{SCORE}, @file{comp.SCORE} and @file{comp.emacs.SCORE}.
-
-@end table
-This variable can also be a list of functions. In that case, all these
-functions will be called, and all the returned lists of score files will
-be applied. These functions can also return lists of score alists
-directly. In that case, the functions that return these non-file score
-alists should probably be placed before the ``real'' score file
-functions, to ensure that the last score file returned is the local
-score file. Phu.
-
-@item gnus-score-expiry-days
-@vindex gnus-score-expiry-days
-This variable says how many days should pass before an unused score file
-entry is expired. If this variable is @code{nil}, no score file entries
-are expired. It's 7 by default.
-
-@item gnus-update-score-entry-dates
-@vindex gnus-update-score-entry-dates
-If this variable is non-@code{nil}, matching score entries will have
-their dates updated. (This is how Gnus controls expiry---all
-non-matching entries will become too old while matching entries will
-stay fresh and young.) However, if you set this variable to @code{nil},
-even matching entries will grow old and will have to face that oh-so
-grim reaper.
-
-@item gnus-score-after-write-file-function
-@vindex gnus-score-after-write-file-function
-Function called with the name of the score file just written.
-
-@item gnus-score-thread-simplify
-@vindex gnus-score-thread-simplify
-If this variable is non-@code{nil}, article subjects will be simplified
-for subject scoring purposes in the same manner as with
-threading---according to the current value of
-gnus-simplify-subject-functions. If the scoring entry uses
-@code{substring} or @code{exact} matching, the match will also be
-simplified in this manner.
-
-@end table
-
-
-@node Score File Format
-@section Score File Format
-@cindex score file format
-
-A score file is an @code{emacs-lisp} file that normally contains just a
-single form. Casual users are not expected to edit these files;
-everything can be changed from the summary buffer.
-
-Anyway, if you'd like to dig into it yourself, here's an example:
-
-@lisp
-(("from"
- ("Lars Ingebrigtsen" -10000)
- ("Per Abrahamsen")
- ("larsi\\|lmi" -50000 nil R))
- ("subject"
- ("Ding is Badd" nil 728373))
- ("xref"
- ("alt.politics" -1000 728372 s))
- ("lines"
- (2 -100 nil <))
- (mark 0)
- (expunge -1000)
- (mark-and-expunge -10)
- (read-only nil)
- (orphan -10)
- (adapt t)
- (files "/hom/larsi/News/gnu.SCORE")
- (exclude-files "all.SCORE")
- (local (gnus-newsgroup-auto-expire t)
- (gnus-summary-make-false-root empty))
- (eval (ding)))
-@end lisp
-
-This example demonstrates most score file elements. For a different
-approach, see @pxref{Advanced Scoring}.
-
-Even though this looks much like lisp code, nothing here is actually
-@code{eval}ed. The lisp reader is used to read this form, though, so it
-has to be valid syntactically, if not semantically.
-
-Six keys are supported by this alist:
-
-@table @code
-
-@item STRING
-If the key is a string, it is the name of the header to perform the
-match on. Scoring can only be performed on these eight headers:
-@code{From}, @code{Subject}, @code{References}, @code{Message-ID},
-@code{Xref}, @code{Lines}, @code{Chars} and @code{Date}. In addition to
-these headers, there are three strings to tell Gnus to fetch the entire
-article and do the match on larger parts of the article: @code{Body}
-will perform the match on the body of the article, @code{Head} will
-perform the match on the head of the article, and @code{All} will
-perform the match on the entire article. Note that using any of these
-last three keys will slow down group entry @emph{considerably}. The
-final ``header'' you can score on is @code{Followup}. These score
-entries will result in new score entries being added for all follow-ups
-to articles that matches these score entries.
-
-Following this key is a arbitrary number of score entries, where each
-score entry has one to four elements.
-@enumerate
-
-@item
-The first element is the @dfn{match element}. On most headers this will
-be a string, but on the Lines and Chars headers, this must be an
-integer.
-
-@item
-If the second element is present, it should be a number---the @dfn{score
-element}. This number should be an integer in the neginf to posinf
-interval. This number is added to the score of the article if the match
-is successful. If this element is not present, the
-@code{gnus-score-interactive-default-score} number will be used
-instead. This is 1000 by default.
-
-@item
-If the third element is present, it should be a number---the @dfn{date
-element}. This date says when the last time this score entry matched,
-which provides a mechanism for expiring the score entries. It this
-element is not present, the score entry is permanent. The date is
-represented by the number of days since December 31, 1 BCE.
-
-@item
-If the fourth element is present, it should be a symbol---the @dfn{type
-element}. This element specifies what function should be used to see
-whether this score entry matches the article. What match types that can
-be used depends on what header you wish to perform the match on.
-@table @dfn
-
-@item From, Subject, References, Xref, Message-ID
-For most header types, there are the @code{r} and @code{R} (regexp), as
-well as @code{s} and @code{S} (substring) types, and @code{e} and
-@code{E} (exact match), and @code{w} (word match) types. If this
-element is not present, Gnus will assume that substring matching should
-be used. @code{R}, @code{S}, and @code{E} differ from the others in
-that the matches will be done in a case-sensitive manner. All these
-one-letter types are really just abbreviations for the @code{regexp},
-@code{string}, @code{exact}, and @code{word} types, which you can use
-instead, if you feel like.
-
-@item Lines, Chars
-These two headers use different match types: @code{<}, @code{>},
-@code{=}, @code{>=} and @code{<=}.
-
-These predicates are true if
-
-@example
-(PREDICATE HEADER MATCH)
-@end example
-
-evaluates to non-@code{nil}. For instance, the advanced match
-@code{("lines" 4 <)} (@pxref{Advanced Scoring}) will result in the
-following form:
-
-@lisp
-(< header-value 4)
-@end lisp
-
-Or to put it another way: When using @code{<} on @code{Lines} with 4 as
-the match, we get the score added if the article has less than 4 lines.
-(It's easy to get confused and think it's the other way around. But
-it's not. I think.)
-
-When matching on @code{Lines}, be careful because some backends (like
-@code{nndir}) do not generate @code{Lines} header, so every article ends
-up being marked as having 0 lines. This can lead to strange results if
-you happen to lower score of the articles with few lines.
-
-@item Date
-For the Date header we have three kinda silly match types:
-@code{before}, @code{at} and @code{after}. I can't really imagine this
-ever being useful, but, like, it would feel kinda silly not to provide
-this function. Just in case. You never know. Better safe than sorry.
-Once burnt, twice shy. Don't judge a book by its cover. Never not have
-sex on a first date. (I have been told that at least one person, and I
-quote, ``found this function indispensable'', however.)
-
-@cindex ISO8601
-@cindex date
-A more useful match type is @code{regexp}. With it, you can match the
-date string using a regular expression. The date is normalized to
-ISO8601 compact format first---@var{YYYYMMDD}@code{T}@var{HHMMSS}. If
-you want to match all articles that have been posted on April 1st in
-every year, you could use @samp{....0401.........} as a match string,
-for instance. (Note that the date is kept in its original time zone, so
-this will match articles that were posted when it was April 1st where
-the article was posted from. Time zones are such wholesome fun for the
-whole family, eh?)
-
-@item Head, Body, All
-These three match keys use the same match types as the @code{From} (etc)
-header uses.
-
-@item Followup
-This match key is somewhat special, in that it will match the
-@code{From} header, and affect the score of not only the matching
-articles, but also all followups to the matching articles. This allows
-you e.g. increase the score of followups to your own articles, or
-decrease the score of followups to the articles of some known
-trouble-maker. Uses the same match types as the @code{From} header
-uses. (Using this match key will lead to creation of @file{ADAPT}
-files.)
-
-@item Thread
-This match key works along the same lines as the @code{Followup} match
-key. If you say that you want to score on a (sub-)thread started by an article with a @code{Message-ID} @var{X}, then you add a
-@samp{thread} match. This will add a new @samp{thread} match for each
-article that has @var{X} in its @code{References} header. (These new
-@samp{thread} matches will use the @code{Message-ID}s of these matching
-articles.) This will ensure that you can raise/lower the score of an
-entire thread, even though some articles in the thread may not have
-complete @code{References} headers. Note that using this may lead to
-undeterministic scores of the articles in the thread. (Using this match
-key will lead to creation of @file{ADAPT} files.)
-@end table
-@end enumerate
-
-@cindex Score File Atoms
-@item mark
-The value of this entry should be a number. Any articles with a score
-lower than this number will be marked as read.
-
-@item expunge
-The value of this entry should be a number. Any articles with a score
-lower than this number will be removed from the summary buffer.
-
-@item mark-and-expunge
-The value of this entry should be a number. Any articles with a score
-lower than this number will be marked as read and removed from the
-summary buffer.
-
-@item thread-mark-and-expunge
-The value of this entry should be a number. All articles that belong to
-a thread that has a total score below this number will be marked as read
-and removed from the summary buffer. @code{gnus-thread-score-function}
-says how to compute the total score for a thread.
-
-@item files
-The value of this entry should be any number of file names. These files
-are assumed to be score files as well, and will be loaded the same way
-this one was.
-
-@item exclude-files
-The clue of this entry should be any number of files. These files will
-not be loaded, even though they would normally be so, for some reason or
-other.
-
-@item eval
-The value of this entry will be @code{eval}el. This element will be
-ignored when handling global score files.
-
-@item read-only
-Read-only score files will not be updated or saved. Global score files
-should feature this atom (@pxref{Global Score Files}). (Note:
-@dfn{Global} here really means @dfn{global}; not your personal
-apply-to-all-groups score files.)
-
-@item orphan
-The value of this entry should be a number. Articles that do not have
-parents will get this number added to their scores. Imagine you follow
-some high-volume newsgroup, like @samp{comp.lang.c}. Most likely you
-will only follow a few of the threads, also want to see any new threads.
-
-You can do this with the following two score file entries:
-
-@example
- (orphan -500)
- (mark-and-expunge -100)
-@end example
-
-When you enter the group the first time, you will only see the new
-threads. You then raise the score of the threads that you find
-interesting (with @kbd{I T} or @kbd{I S}), and ignore (@kbd{C y}) the
-rest. Next time you enter the group, you will see new articles in the
-interesting threads, plus any new threads.
-
-I.e.---the orphan score atom is for high-volume groups where there
-exist a few interesting threads which can't be found automatically by
-ordinary scoring rules.
-
-@item adapt
-This entry controls the adaptive scoring. If it is @code{t}, the
-default adaptive scoring rules will be used. If it is @code{ignore}, no
-adaptive scoring will be performed on this group. If it is a list, this
-list will be used as the adaptive scoring rules. If it isn't present,
-or is something other than @code{t} or @code{ignore}, the default
-adaptive scoring rules will be used. If you want to use adaptive
-scoring on most groups, you'd set @code{gnus-use-adaptive-scoring} to
-@code{t}, and insert an @code{(adapt ignore)} in the groups where you do
-not want adaptive scoring. If you only want adaptive scoring in a few
-groups, you'd set @code{gnus-use-adaptive-scoring} to @code{nil}, and
-insert @code{(adapt t)} in the score files of the groups where you want
-it.
-
-@item adapt-file
-All adaptive score entries will go to the file named by this entry. It
-will also be applied when entering the group. This atom might be handy
-if you want to adapt on several groups at once, using the same adaptive
-file for a number of groups.
-
-@item local
-@cindex local variables
-The value of this entry should be a list of @code{(VAR VALUE)} pairs.
-Each @var{var} will be made buffer-local to the current summary buffer,
-and set to the value specified. This is a convenient, if somewhat
-strange, way of setting variables in some groups if you don't like hooks
-much. Note that the @var{value} won't be evaluated.
-@end table
-
-
-@node Score File Editing
-@section Score File Editing
-
-You normally enter all scoring commands from the summary buffer, but you
-might feel the urge to edit them by hand as well, so we've supplied you
-with a mode for that.
-
-It's simply a slightly customized @code{emacs-lisp} mode, with these
-additional commands:
-
-@table @kbd
-
-@item C-c C-c
-@kindex C-c C-c (Score)
-@findex gnus-score-edit-done
-Save the changes you have made and return to the summary buffer
-(@code{gnus-score-edit-done}).
-
-@item C-c C-d
-@kindex C-c C-d (Score)
-@findex gnus-score-edit-insert-date
-Insert the current date in numerical format
-(@code{gnus-score-edit-insert-date}). This is really the day number, if
-you were wondering.
-
-@item C-c C-p
-@kindex C-c C-p (Score)
-@findex gnus-score-pretty-print
-The adaptive score files are saved in an unformatted fashion. If you
-intend to read one of these files, you want to @dfn{pretty print} it
-first. This command (@code{gnus-score-pretty-print}) does that for
-you.
-
-@end table
-
-Type @kbd{M-x gnus-score-mode} to use this mode.
-
-@vindex gnus-score-mode-hook
-@code{gnus-score-menu-hook} is run in score mode buffers.
-
-In the summary buffer you can use commands like @kbd{V f} and @kbd{V
-e} to begin editing score files.
-
-
-@node Adaptive Scoring
-@section Adaptive Scoring
-@cindex adaptive scoring
-
-If all this scoring is getting you down, Gnus has a way of making it all
-happen automatically---as if by magic. Or rather, as if by artificial
-stupidity, to be precise.
-
-@vindex gnus-use-adaptive-scoring
-When you read an article, or mark an article as read, or kill an
-article, you leave marks behind. On exit from the group, Gnus can sniff
-these marks and add score elements depending on what marks it finds.
-You turn on this ability by setting @code{gnus-use-adaptive-scoring} to
-@code{t} or @code{(line)}. If you want score adaptively on separate
-words appearing in the subjects, you should set this variable to
-@code{(word)}. If you want to use both adaptive methods, set this
-variable to @code{(word line)}.
-
-@vindex gnus-default-adaptive-score-alist
-To give you complete control over the scoring process, you can customize
-the @code{gnus-default-adaptive-score-alist} variable. For instance, it
-might look something like this:
-
-@lisp
-(defvar gnus-default-adaptive-score-alist
- '((gnus-unread-mark)
- (gnus-ticked-mark (from 4))
- (gnus-dormant-mark (from 5))
- (gnus-del-mark (from -4) (subject -1))
- (gnus-read-mark (from 4) (subject 2))
- (gnus-expirable-mark (from -1) (subject -1))
- (gnus-killed-mark (from -1) (subject -3))
- (gnus-kill-file-mark)
- (gnus-ancient-mark)
- (gnus-low-score-mark)
- (gnus-catchup-mark (from -1) (subject -1))))
-@end lisp
-
-As you see, each element in this alist has a mark as a key (either a
-variable name or a ``real'' mark---a character). Following this key is
-a arbitrary number of header/score pairs. If there are no header/score
-pairs following the key, no adaptive scoring will be done on articles
-that have that key as the article mark. For instance, articles with
-@code{gnus-unread-mark} in the example above will not get adaptive score
-entries.
-
-Each article can have only one mark, so just a single of these rules
-will be applied to each article.
-
-To take @code{gnus-del-mark} as an example---this alist says that all
-articles that have that mark (i.e., are marked with @samp{D}) will have a
-score entry added to lower based on the @code{From} header by -4, and
-lowered by @code{Subject} by -1. Change this to fit your prejudices.
-
-If you have marked 10 articles with the same subject with
-@code{gnus-del-mark}, the rule for that mark will be applied ten times.
-That means that that subject will get a score of ten times -1, which
-should be, unless I'm much mistaken, -10.
-
-If you have auto-expirable (mail) groups (@pxref{Expiring Mail}), all
-the read articles will be marked with the @samp{E} mark. This'll
-probably make adaptive scoring slightly impossible, so auto-expiring and
-adaptive scoring doesn't really mix very well.
-
-The headers you can score on are @code{from}, @code{subject},
-@code{message-id}, @code{references}, @code{xref}, @code{lines},
-@code{chars} and @code{date}. In addition, you can score on
-@code{followup}, which will create an adaptive score entry that matches
-on the @code{References} header using the @code{Message-ID} of the
-current article, thereby matching the following thread.
-
-You can also score on @code{thread}, which will try to score all
-articles that appear in a thread. @code{thread} matches uses a
-@code{Message-ID} to match on the @code{References} header of the
-article. If the match is made, the @code{Message-ID} of the article is
-added to the @code{thread} rule. (Think about it. I'd recommend two
-aspirins afterwards.)
-
-If you use this scheme, you should set the score file atom @code{mark}
-to something small---like -300, perhaps, to avoid having small random
-changes result in articles getting marked as read.
-
-After using adaptive scoring for a week or so, Gnus should start to
-become properly trained and enhance the authors you like best, and kill
-the authors you like least, without you having to say so explicitly.
-
-You can control what groups the adaptive scoring is to be performed on
-by using the score files (@pxref{Score File Format}). This will also
-let you use different rules in different groups.
-
-@vindex gnus-adaptive-file-suffix
-The adaptive score entries will be put into a file where the name is the
-group name with @code{gnus-adaptive-file-suffix} appended. The default
-is @samp{ADAPT}.
-
-@vindex gnus-score-exact-adapt-limit
-When doing adaptive scoring, substring or fuzzy matching would probably
-give you the best results in most cases. However, if the header one
-matches is short, the possibility for false positives is great, so if
-the length of the match is less than
-@code{gnus-score-exact-adapt-limit}, exact matching will be used. If
-this variable is @code{nil}, exact matching will always be used to avoid
-this problem.
-
-@vindex gnus-default-adaptive-word-score-alist
-As mentioned above, you can adapt either on individual words or entire
-headers. If you adapt on words, the
-@code{gnus-default-adaptive-word-score-alist} variable says what score
-each instance of a word should add given a mark.
-
-@lisp
-(setq gnus-default-adaptive-word-score-alist
- `((,gnus-read-mark . 30)
- (,gnus-catchup-mark . -10)
- (,gnus-killed-mark . -20)
- (,gnus-del-mark . -15)))
-@end lisp
-
-This is the default value. If you have adaption on words enabled, every
-word that appears in subjects of articles marked with
-@code{gnus-read-mark} will result in a score rule that increase the
-score with 30 points.
-
-@vindex gnus-default-ignored-adaptive-words
-@vindex gnus-ignored-adaptive-words
-Words that appear in the @code{gnus-default-ignored-adaptive-words} list
-will be ignored. If you wish to add more words to be ignored, use the
-@code{gnus-ignored-adaptive-words} list instead.
-
-@vindex gnus-adaptive-word-syntax-table
-When the scoring is done, @code{gnus-adaptive-word-syntax-table} is the
-syntax table in effect. It is similar to the standard syntax table, but
-it considers numbers to be non-word-constituent characters.
-
-@vindex gnus-adaptive-word-minimum
-If @code{gnus-adaptive-word-minimum} is set to a number, the adaptive
-word scoring process will never bring down the score of an article to
-below this number. The default is @code{nil}.
-
-@vindex gnus-adaptive-word-no-group-words
-If @code{gnus-adaptive-word-no-group-words} is set to @code{t}, gnus
-won't adaptively word score any of the words in the group name. Useful
-for groups like @samp{comp.editors.emacs}, where most of the subject
-lines contain the word @samp{emacs}.
-
-After using this scheme for a while, it might be nice to write a
-@code{gnus-psychoanalyze-user} command to go through the rules and see
-what words you like and what words you don't like. Or perhaps not.
-
-Note that the adaptive word scoring thing is highly experimental and is
-likely to change in the future. Initial impressions seem to indicate
-that it's totally useless as it stands. Some more work (involving more
-rigorous statistical methods) will have to be done to make this useful.
-
-
-@node Home Score File
-@section Home Score File
-
-The score file where new score file entries will go is called the
-@dfn{home score file}. This is normally (and by default) the score file
-for the group itself. For instance, the home score file for
-@samp{gnu.emacs.gnus} is @file{gnu.emacs.gnus.SCORE}.
-
-However, this may not be what you want. It is often convenient to share
-a common home score file among many groups---all @samp{emacs} groups
-could perhaps use the same home score file.
-
-@vindex gnus-home-score-file
-The variable that controls this is @code{gnus-home-score-file}. It can
-be:
-
-@enumerate
-@item
-A string. Then this file will be used as the home score file for all
-groups.
-
-@item
-A function. The result of this function will be used as the home score
-file. The function will be called with the name of the group as the
-parameter.
-
-@item
-A list. The elements in this list can be:
-
-@enumerate
-@item
-@var{(regexp file-name)}. If the @var{regexp} matches the group name,
-the @var{file-name} will will be used as the home score file.
-
-@item
-A function. If the function returns non-nil, the result will be used as
-the home score file.
-
-@item
-A string. Use the string as the home score file.
-@end enumerate
-
-The list will be traversed from the beginning towards the end looking
-for matches.
-
-@end enumerate
-
-So, if you want to use just a single score file, you could say:
-
-@lisp
-(setq gnus-home-score-file
- "my-total-score-file.SCORE")
-@end lisp
-
-If you want to use @file{gnu.SCORE} for all @samp{gnu} groups and
-@file{rec.SCORE} for all @samp{rec} groups (and so on), you can say:
-
-@findex gnus-hierarchial-home-score-file
-@lisp
-(setq gnus-home-score-file
- 'gnus-hierarchial-home-score-file)
-@end lisp
-
-This is a ready-made function provided for your convenience.
-Other functions include
-
-@table @code
-@item gnus-current-home-score-file
-@findex gnus-current-home-score-file
-Return the ``current'' regular score file. This will make scoring
-commands add entry to the ``innermost'' matching score file.
-
-@end table
-
-If you want to have one score file for the @samp{emacs} groups and
-another for the @samp{comp} groups, while letting all other groups use
-their own home score files:
-
-@lisp
-(setq gnus-home-score-file
- ;; All groups that match the regexp "\\.emacs"
- '(("\\.emacs" "emacs.SCORE")
- ;; All the comp groups in one score file
- ("^comp" "comp.SCORE")))
-@end lisp
-
-@vindex gnus-home-adapt-file
-@code{gnus-home-adapt-file} works exactly the same way as
-@code{gnus-home-score-file}, but says what the home adaptive score file
-is instead. All new adaptive file entries will go into the file
-specified by this variable, and the same syntax is allowed.
-
-In addition to using @code{gnus-home-score-file} and
-@code{gnus-home-adapt-file}, you can also use group parameters
-(@pxref{Group Parameters}) and topic parameters (@pxref{Topic
-Parameters}) to achieve much the same. Group and topic parameters take
-precedence over this variable.
-
-
-@node Followups To Yourself
-@section Followups To Yourself
-
-Gnus offers two commands for picking out the @code{Message-ID} header in
-the current buffer. Gnus will then add a score rule that scores using
-this @code{Message-ID} on the @code{References} header of other
-articles. This will, in effect, increase the score of all articles that
-respond to the article in the current buffer. Quite useful if you want
-to easily note when people answer what you've said.
-
-@table @code
-
-@item gnus-score-followup-article
-@findex gnus-score-followup-article
-This will add a score to articles that directly follow up your own
-article.
-
-@item gnus-score-followup-thread
-@findex gnus-score-followup-thread
-This will add a score to all articles that appear in a thread ``below''
-your own article.
-@end table
-
-@vindex message-sent-hook
-These two functions are both primarily meant to be used in hooks like
-@code{message-sent-hook}.
-
-If you look closely at your own @code{Message-ID}, you'll notice that
-the first two or three characters are always the same. Here's two of
-mine:
-
-@example
-<x6u3u47icf.fsf@@eyesore.no>
-<x6sp9o7ibw.fsf@@eyesore.no>
-@end example
-
-So ``my'' ident on this machine is @samp{x6}. This can be
-exploited---the following rule will raise the score on all followups to
-myself:
-
-@lisp
-("references"
- ("<x6[0-9a-z]+\\.fsf\\(_-_\\)?@@.*eyesore.no>"
- 1000 nil r))
-@end lisp
-
-Whether it's the first two or first three characters that are ``yours''
-is system-dependent.
-
-
-@node Scoring Tips
-@section Scoring Tips
-@cindex scoring tips
-
-@table @dfn
-
-@item Crossposts
-@cindex crossposts
-@cindex scoring crossposts
-If you want to lower the score of crossposts, the line to match on is
-the @code{Xref} header.
-@lisp
-("xref" (" talk.politics.misc:" -1000))
-@end lisp
-
-@item Multiple crossposts
-If you want to lower the score of articles that have been crossposted to
-more than, say, 3 groups:
-@lisp
-("xref" ("[^:\n]+:[0-9]+ +[^:\n]+:[0-9]+ +[^:\n]+:[0-9]+" -1000 nil r))
-@end lisp
-
-@item Matching on the body
-This is generally not a very good idea---it takes a very long time.
-Gnus actually has to fetch each individual article from the server. But
-you might want to anyway, I guess. Even though there are three match
-keys (@code{Head}, @code{Body} and @code{All}), you should choose one
-and stick with it in each score file. If you use any two, each article
-will be fetched @emph{twice}. If you want to match a bit on the
-@code{Head} and a bit on the @code{Body}, just use @code{All} for all
-the matches.
-
-@item Marking as read
-You will probably want to mark articles that has a score below a certain
-number as read. This is most easily achieved by putting the following
-in your @file{all.SCORE} file:
-@lisp
-((mark -100))
-@end lisp
-You may also consider doing something similar with @code{expunge}.
-
-@item Negated character classes
-If you say stuff like @code{[^abcd]*}, you may get unexpected results.
-That will match newlines, which might lead to, well, The Unknown. Say
-@code{[^abcd\n]*} instead.
-@end table
-
-
-@node Reverse Scoring
-@section Reverse Scoring
-@cindex reverse scoring
-
-If you want to keep just articles that have @samp{Sex with Emacs} in the
-subject header, and expunge all other articles, you could put something
-like this in your score file:
-
-@lisp
-(("subject"
- ("Sex with Emacs" 2))
- (mark 1)
- (expunge 1))
-@end lisp
-
-So, you raise all articles that match @samp{Sex with Emacs} and mark the
-rest as read, and expunge them to boot.
-
-
-@node Global Score Files
-@section Global Score Files
-@cindex global score files
-
-Sure, other newsreaders have ``global kill files''. These are usually
-nothing more than a single kill file that applies to all groups, stored
-in the user's home directory. Bah! Puny, weak newsreaders!
-
-What I'm talking about here are Global Score Files. Score files from
-all over the world, from users everywhere, uniting all nations in one
-big, happy score file union! Ange-score! New and untested!
-
-@vindex gnus-global-score-files
-All you have to do to use other people's score files is to set the
-@code{gnus-global-score-files} variable. One entry for each score file,
-or each score file directory. Gnus will decide by itself what score
-files are applicable to which group.
-
-Say you want to use the score file
-@file{/ftp@@ftp.gnus.org:/pub/larsi/ding/score/soc.motss.SCORE} and
-all score files in the @file{/ftp@@ftp.some-where:/pub/score} directory:
-
-@lisp
-(setq gnus-global-score-files
- '("/ftp@@ftp.gnus.org:/pub/larsi/ding/score/soc.motss.SCORE"
- "/ftp@@ftp.some-where:/pub/score/"))
-@end lisp
-
-@findex gnus-score-search-global-directories
-Simple, eh? Directory names must end with a @samp{/}. These
-directories are typically scanned only once during each Gnus session.
-If you feel the need to manually re-scan the remote directories, you can
-use the @code{gnus-score-search-global-directories} command.
-
-Note that, at present, using this option will slow down group entry
-somewhat. (That is---a lot.)
-
-If you want to start maintaining score files for other people to use,
-just put your score file up for anonymous ftp and announce it to the
-world. Become a retro-moderator! Participate in the retro-moderator
-wars sure to ensue, where retro-moderators battle it out for the
-sympathy of the people, luring them to use their score files on false
-premises! Yay! The net is saved!
-
-Here are some tips for the would-be retro-moderator, off the top of my
-head:
-
-@itemize @bullet
-
-@item
-Articles heavily crossposted are probably junk.
-@item
-To lower a single inappropriate article, lower by @code{Message-ID}.
-@item
-Particularly brilliant authors can be raised on a permanent basis.
-@item
-Authors that repeatedly post off-charter for the group can safely be
-lowered out of existence.
-@item
-Set the @code{mark} and @code{expunge} atoms to obliterate the nastiest
-articles completely.
-
-@item
-Use expiring score entries to keep the size of the file down. You
-should probably have a long expiry period, though, as some sites keep
-old articles for a long time.
-@end itemize
-
-... I wonder whether other newsreaders will support global score files
-in the future. @emph{Snicker}. Yup, any day now, newsreaders like Blue
-Wave, xrn and 1stReader are bound to implement scoring. Should we start
-holding our breath yet?
-
-
-@node Kill Files
-@section Kill Files
-@cindex kill files
-
-Gnus still supports those pesky old kill files. In fact, the kill file
-entries can now be expiring, which is something I wrote before Daniel
-Quinlan thought of doing score files, so I've left the code in there.
-
-In short, kill processing is a lot slower (and I do mean @emph{a lot})
-than score processing, so it might be a good idea to rewrite your kill
-files into score files.
-
-Anyway, a kill file is a normal @code{emacs-lisp} file. You can put any
-forms into this file, which means that you can use kill files as some
-sort of primitive hook function to be run on group entry, even though
-that isn't a very good idea.
-
-Normal kill files look like this:
-
-@lisp
-(gnus-kill "From" "Lars Ingebrigtsen")
-(gnus-kill "Subject" "ding")
-(gnus-expunge "X")
-@end lisp
-
-This will mark every article written by me as read, and remove the
-marked articles from the summary buffer. Very useful, you'll agree.
-
-Other programs use a totally different kill file syntax. If Gnus
-encounters what looks like a @code{rn} kill file, it will take a stab at
-interpreting it.
-
-Two summary functions for editing a GNUS kill file:
-
-@table @kbd
-
-@item M-k
-@kindex M-k (Summary)
-@findex gnus-summary-edit-local-kill
-Edit this group's kill file (@code{gnus-summary-edit-local-kill}).
-
-@item M-K
-@kindex M-K (Summary)
-@findex gnus-summary-edit-global-kill
-Edit the general kill file (@code{gnus-summary-edit-global-kill}).
-@end table
-
-Two group mode functions for editing the kill files:
-
-@table @kbd
-
-@item M-k
-@kindex M-k (Group)
-@findex gnus-group-edit-local-kill
-Edit this group's kill file (@code{gnus-group-edit-local-kill}).
-
-@item M-K
-@kindex M-K (Group)
-@findex gnus-group-edit-global-kill
-Edit the general kill file (@code{gnus-group-edit-global-kill}).
-@end table
-
-Kill file variables:
-
-@table @code
-@item gnus-kill-file-name
-@vindex gnus-kill-file-name
-A kill file for the group @samp{soc.motss} is normally called
-@file{soc.motss.KILL}. The suffix appended to the group name to get
-this file name is detailed by the @code{gnus-kill-file-name} variable.
-The ``global'' kill file (not in the score file sense of ``global'', of
-course) is just called @file{KILL}.
-
-@vindex gnus-kill-save-kill-file
-@item gnus-kill-save-kill-file
-If this variable is non-@code{nil}, Gnus will save the
-kill file after processing, which is necessary if you use expiring
-kills.
-
-@item gnus-apply-kill-hook
-@vindex gnus-apply-kill-hook
-@findex gnus-apply-kill-file-unless-scored
-@findex gnus-apply-kill-file
-A hook called to apply kill files to a group. It is
-@code{(gnus-apply-kill-file)} by default. If you want to ignore the
-kill file if you have a score file for the same group, you can set this
-hook to @code{(gnus-apply-kill-file-unless-scored)}. If you don't want
-kill files to be processed, you should set this variable to @code{nil}.
-
-@item gnus-kill-file-mode-hook
-@vindex gnus-kill-file-mode-hook
-A hook called in kill-file mode buffers.
-
-@end table
-
-
-@node Converting Kill Files
-@section Converting Kill Files
-@cindex kill files
-@cindex converting kill files
-
-If you have loads of old kill files, you may want to convert them into
-score files. If they are ``regular'', you can use
-the @file{gnus-kill-to-score.el} package; if not, you'll have to do it
-by hand.
-
-The kill to score conversion package isn't included in Gnus by default.
-You can fetch it from
-@file{http://www.stud.ifi.uio.no/~larsi/ding-other/gnus-kill-to-score}.
-
-If your old kill files are very complex---if they contain more
-non-@code{gnus-kill} forms than not, you'll have to convert them by
-hand. Or just let them be as they are. Gnus will still use them as
-before.
-
-
-@node GroupLens
-@section GroupLens
-@cindex GroupLens
-
-GroupLens is a collaborative filtering system that helps you work
-together with other people to find the quality news articles out of the
-huge volume of news articles generated every day.
-
-To accomplish this the GroupLens system combines your opinions about
-articles you have already read with the opinions of others who have done
-likewise and gives you a personalized prediction for each unread news
-article. Think of GroupLens as a matchmaker. GroupLens watches how you
-rate articles, and finds other people that rate articles the same way.
-Once it has found some people you agree with it tells you, in the form
-of a prediction, what they thought of the article. You can use this
-prediction to help you decide whether or not you want to read the
-article.
-
-@menu
-* Using GroupLens:: How to make Gnus use GroupLens.
-* Rating Articles:: Letting GroupLens know how you rate articles.
-* Displaying Predictions:: Displaying predictions given by GroupLens.
-* GroupLens Variables:: Customizing GroupLens.
-@end menu
-
-
-@node Using GroupLens
-@subsection Using GroupLens
-
-To use GroupLens you must register a pseudonym with your local Better
-Bit Bureau (BBB).
-@samp{http://www.cs.umn.edu/Research/GroupLens/bbb.html} is the only
-better bit in town at the moment.
-
-Once you have registered you'll need to set a couple of variables.
-
-@table @code
-
-@item gnus-use-grouplens
-@vindex gnus-use-grouplens
-Setting this variable to a non-@code{nil} value will make Gnus hook into
-all the relevant GroupLens functions.
-
-@item grouplens-pseudonym
-@vindex grouplens-pseudonym
-This variable should be set to the pseudonym you got when registering
-with the Better Bit Bureau.
-
-@item grouplens-newsgroups
-@vindex grouplens-newsgroups
-A list of groups that you want to get GroupLens predictions for.
-
-@end table
-
-That's the minimum of what you need to get up and running with GroupLens.
-Once you've registered, GroupLens will start giving you scores for
-articles based on the average of what other people think. But, to get
-the real benefit of GroupLens you need to start rating articles
-yourself. Then the scores GroupLens gives you will be personalized for
-you, based on how the people you usually agree with have already rated.
-
-
-@node Rating Articles
-@subsection Rating Articles
-
-In GroupLens, an article is rated on a scale from 1 to 5, inclusive.
-Where 1 means something like this article is a waste of bandwidth and 5
-means that the article was really good. The basic question to ask
-yourself is, "on a scale from 1 to 5 would I like to see more articles
-like this one?"
-
-There are four ways to enter a rating for an article in GroupLens.
-
-@table @kbd
-
-@item r
-@kindex r (GroupLens)
-@findex bbb-summary-rate-article
-This function will prompt you for a rating on a scale of one to five.
-
-@item k
-@kindex k (GroupLens)
-@findex grouplens-score-thread
-This function will prompt you for a rating, and rate all the articles in
-the thread. This is really useful for some of those long running giant
-threads in rec.humor.
-
-@end table
-
-The next two commands, @kbd{n} and @kbd{,} take a numerical prefix to be
-the score of the article you're reading.
-
-@table @kbd
-
-@item 1-5 n
-@kindex n (GroupLens)
-@findex grouplens-next-unread-article
-Rate the article and go to the next unread article.
-
-@item 1-5 ,
-@kindex , (GroupLens)
-@findex grouplens-best-unread-article
-Rate the article and go to the next unread article with the highest score.
-
-@end table
-
-If you want to give the current article a score of 4 and then go to the
-next article, just type @kbd{4 n}.
-
-
-@node Displaying Predictions
-@subsection Displaying Predictions
-
-GroupLens makes a prediction for you about how much you will like a
-news article. The predictions from GroupLens are on a scale from 1 to
-5, where 1 is the worst and 5 is the best. You can use the predictions
-from GroupLens in one of three ways controlled by the variable
-@code{gnus-grouplens-override-scoring}.
-
-@vindex gnus-grouplens-override-scoring
-There are three ways to display predictions in grouplens. You may
-choose to have the GroupLens scores contribute to, or override the
-regular gnus scoring mechanism. override is the default; however, some
-people prefer to see the Gnus scores plus the grouplens scores. To get
-the separate scoring behavior you need to set
-@code{gnus-grouplens-override-scoring} to @code{'separate}. To have the
-GroupLens predictions combined with the grouplens scores set it to
-@code{'override} and to combine the scores set
-@code{gnus-grouplens-override-scoring} to @code{'combine}. When you use
-the combine option you will also want to set the values for
-@code{grouplens-prediction-offset} and
-@code{grouplens-score-scale-factor}.
-
-@vindex grouplens-prediction-display
-In either case, GroupLens gives you a few choices for how you would like
-to see your predictions displayed. The display of predictions is
-controlled by the @code{grouplens-prediction-display} variable.
-
-The following are valid values for that variable.
-
-@table @code
-@item prediction-spot
-The higher the prediction, the further to the right an @samp{*} is
-displayed.
-
-@item confidence-interval
-A numeric confidence interval.
-
-@item prediction-bar
-The higher the prediction, the longer the bar.
-
-@item confidence-bar
-Numerical confidence.
-
-@item confidence-spot
-The spot gets bigger with more confidence.
-
-@item prediction-num
-Plain-old numeric value.
-
-@item confidence-plus-minus
-Prediction +/- confidence.
-
-@end table
-
-
-@node GroupLens Variables
-@subsection GroupLens Variables
-
-@table @code
-
-@item gnus-summary-grouplens-line-format
-The summary line format used in GroupLens-enhanced summary buffers. It
-accepts the same specs as the normal summary line format (@pxref{Summary
-Buffer Lines}). The default is @samp{%U%R%z%l%I%(%[%4L: %-20,20n%]%)
-%s\n}.
-
-@item grouplens-bbb-host
-Host running the bbbd server. @samp{grouplens.cs.umn.edu} is the
-default.
-
-@item grouplens-bbb-port
-Port of the host running the bbbd server. The default is 9000.
-
-@item grouplens-score-offset
-Offset the prediction by this value. In other words, subtract the
-prediction value by this number to arrive at the effective score. The
-default is 0.
-
-@item grouplens-score-scale-factor
-This variable allows the user to magnify the effect of GroupLens scores.
-The scale factor is applied after the offset. The default is 1.
-
-@end table
-
-
-@node Advanced Scoring
-@section Advanced Scoring
-
-Scoring on Subjects and From headers is nice enough, but what if you're
-really interested in what a person has to say only when she's talking
-about a particular subject? Or what if you really don't want to
-read what person A has to say when she's following up to person B, but
-want to read what she says when she's following up to person C?
-
-By using advanced scoring rules you may create arbitrarily complex
-scoring patterns.
-
-@menu
-* Advanced Scoring Syntax:: A definition.
-* Advanced Scoring Examples:: What they look like.
-* Advanced Scoring Tips:: Getting the most out of it.
-@end menu
-
-
-@node Advanced Scoring Syntax
-@subsection Advanced Scoring Syntax
-
-Ordinary scoring rules have a string as the first element in the rule.
-Advanced scoring rules have a list as the first element. The second
-element is the score to be applied if the first element evaluated to a
-non-@code{nil} value.
-
-These lists may consist of three logical operators, one redirection
-operator, and various match operators.
-
-Logical operators:
-
-@table @code
-@item &
-@itemx and
-This logical operator will evaluate each of its arguments until it finds
-one that evaluates to @code{false}, and then it'll stop. If all arguments
-evaluate to @code{true} values, then this operator will return
-@code{true}.
-
-@item |
-@itemx or
-This logical operator will evaluate each of its arguments until it finds
-one that evaluates to @code{true}. If no arguments are @code{true},
-then this operator will return @code{false}.
-
-@item !
-@itemx not
-@itemx ¬
-This logical operator only takes a single argument. It returns the
-logical negation of the value of its argument.
-
-@end table
-
-There is an @dfn{indirection operator} that will make its arguments
-apply to the ancestors of the current article being scored. For
-instance, @code{1-} will make score rules apply to the parent of the
-current article. @code{2-} will make score rules apply to the
-grandparent of the current article. Alternatively, you can write
-@code{^^}, where the number of @code{^}s (carets) says how far back into
-the ancestry you want to go.
-
-Finally, we have the match operators. These are the ones that do the
-real work. Match operators are header name strings followed by a match
-and a match type. A typical match operator looks like @samp{("from"
-"Lars Ingebrigtsen" s)}. The header names are the same as when using
-simple scoring, and the match types are also the same.
-
-
-@node Advanced Scoring Examples
-@subsection Advanced Scoring Examples
-
-Let's say you want to increase the score of articles written by Lars
-when he's talking about Gnus:
-
-@example
-((&
- ("from" "Lars Ingebrigtsen")
- ("subject" "Gnus"))
- 1000)
-@end example
-
-Quite simple, huh?
-
-When he writes long articles, he sometimes has something nice to say:
-
-@example
-((&
- ("from" "Lars Ingebrigtsen")
- (|
- ("subject" "Gnus")
- ("lines" 100 >)))
- 1000)
-@end example
-
-However, when he responds to things written by Reig Eigil Logge, you
-really don't want to read what he's written:
-
-@example
-((&
- ("from" "Lars Ingebrigtsen")
- (1- ("from" "Reig Eigir Logge")))
- -100000)
-@end example
-
-Everybody that follows up Redmondo when he writes about disappearing
-socks should have their scores raised, but only when they talk about
-white socks. However, when Lars talks about socks, it's usually not
-very interesting:
-
-@example
-((&
- (1-
- (&
- ("from" "redmondo@@.*no" r)
- ("body" "disappearing.*socks" t)))
- (! ("from" "Lars Ingebrigtsen"))
- ("body" "white.*socks"))
- 1000)
-@end example
-
-The possibilities are endless.
-
-
-@node Advanced Scoring Tips
-@subsection Advanced Scoring Tips
-
-The @code{&} and @code{|} logical operators do short-circuit logic.
-That is, they stop processing their arguments when it's clear what the
-result of the operation will be. For instance, if one of the arguments
-of an @code{&} evaluates to @code{false}, there's no point in evaluating
-the rest of the arguments. This means that you should put slow matches
-(@samp{body}, @samp{header}) last and quick matches (@samp{from},
-@samp{subject}) first.
-
-The indirection arguments (@code{1-} and so on) will make their
-arguments work on previous generations of the thread. If you say
-something like:
-
-@example
-...
-(1-
- (1-
- ("from" "lars")))
-...
-@end example
-
-Then that means "score on the from header of the grandparent of the
-current article". An indirection is quite fast, but it's better to say:
-
-@example
-(1-
- (&
- ("from" "Lars")
- ("subject" "Gnus")))
-@end example
-
-than it is to say:
-
-@example
-(&
- (1- ("from" "Lars"))
- (1- ("subject" "Gnus")))
-@end example
-
-
-@node Score Decays
-@section Score Decays
-@cindex score decays
-@cindex decays
-
-You may find that your scores have a tendency to grow without
-bounds, especially if you're using adaptive scoring. If scores get too
-big, they lose all meaning---they simply max out and it's difficult to
-use them in any sensible way.
-
-@vindex gnus-decay-scores
-@findex gnus-decay-score
-@vindex gnus-decay-score-function
-Gnus provides a mechanism for decaying scores to help with this problem.
-When score files are loaded and @code{gnus-decay-scores} is
-non-@code{nil}, Gnus will run the score files through the decaying
-mechanism thereby lowering the scores of all non-permanent score rules.
-The decay itself if performed by the @code{gnus-decay-score-function}
-function, which is @code{gnus-decay-score} by default. Here's the
-definition of that function:
-
-@lisp
-(defun gnus-decay-score (score)
- "Decay SCORE.
-This is done according to `gnus-score-decay-constant'
-and `gnus-score-decay-scale'."
- (floor
- (- score
- (* (if (< score 0) 1 -1)
- (min (abs score)
- (max gnus-score-decay-constant
- (* (abs score)
- gnus-score-decay-scale)))))))
-@end lisp
-
-@vindex gnus-score-decay-scale
-@vindex gnus-score-decay-constant
-@code{gnus-score-decay-constant} is 3 by default and
-@code{gnus-score-decay-scale} is 0.05. This should cause the following:
-
-@enumerate
-@item
-Scores between -3 and 3 will be set to 0 when this function is called.
-
-@item
-Scores with magnitudes between 3 and 60 will be shrunk by 3.
-
-@item
-Scores with magnitudes greater than 60 will be shrunk by 5% of the
-score.
-@end enumerate
-
-If you don't like this decay function, write your own. It is called
-with the score to be decayed as its only parameter, and it should return
-the new score, which should be an integer.
-
-Gnus will try to decay scores once a day. If you haven't run Gnus for
-four days, Gnus will decay the scores four times, for instance.
-
-
-@node Various
-@chapter Various
-
-@menu
-* Process/Prefix:: A convention used by many treatment commands.
-* Interactive:: Making Gnus ask you many questions.
-* Symbolic Prefixes:: How to supply some Gnus functions with options.
-* Formatting Variables:: You can specify what buffers should look like.
-* Windows Configuration:: Configuring the Gnus buffer windows.
-* Faces and Fonts:: How to change how faces look.
-* Compilation:: How to speed Gnus up.
-* Mode Lines:: Displaying information in the mode lines.
-* Highlighting and Menus:: Making buffers look all nice and cozy.
-* Buttons:: Get tendonitis in ten easy steps!
-* Daemons:: Gnus can do things behind your back.
-* NoCeM:: How to avoid spam and other fatty foods.
-* Undo:: Some actions can be undone.
-* Moderation:: What to do if you're a moderator.
-* XEmacs Enhancements:: There are more pictures and stuff under XEmacs.
-* Fuzzy Matching:: What's the big fuzz?
-* Thwarting Email Spam:: A how-to on avoiding unsolicited commercial email.
-* Various Various:: Things that are really various.
-@end menu
-
-
-@node Process/Prefix
-@section Process/Prefix
-@cindex process/prefix convention
-
-Many functions, among them functions for moving, decoding and saving
-articles, use what is known as the @dfn{Process/Prefix convention}.
-
-This is a method for figuring out what articles the user wants the
-command to be performed on.
-
-It goes like this:
-
-If the numeric prefix is N, perform the operation on the next N
-articles, starting with the current one. If the numeric prefix is
-negative, perform the operation on the previous N articles, starting
-with the current one.
-
-@vindex transient-mark-mode
-If @code{transient-mark-mode} in non-@code{nil} and the region is
-active, all articles in the region will be worked upon.
-
-If there is no numeric prefix, but some articles are marked with the
-process mark, perform the operation on the articles marked with
-the process mark.
-
-If there is neither a numeric prefix nor any articles marked with the
-process mark, just perform the operation on the current article.
-
-Quite simple, really, but it needs to be made clear so that surprises
-are avoided.
-
-Commands that react to the process mark will push the current list of
-process marked articles onto a stack and will then clear all process
-marked articles. You can restore the previous configuration with the
-@kbd{M P y} command (@pxref{Setting Process Marks}).
-
-@vindex gnus-summary-goto-unread
-One thing that seems to shock & horrify lots of people is that, for
-instance, @kbd{3 d} does exactly the same as @kbd{d} @kbd{d} @kbd{d}.
-Since each @kbd{d} (which marks the current article as read) by default
-goes to the next unread article after marking, this means that @kbd{3 d}
-will mark the next three unread articles as read, no matter what the
-summary buffer looks like. Set @code{gnus-summary-goto-unread} to
-@code{nil} for a more straightforward action.
-
-
-@node Interactive
-@section Interactive
-@cindex interaction
-
-@table @code
-
-@item gnus-novice-user
-@vindex gnus-novice-user
-If this variable is non-@code{nil}, you are either a newcomer to the
-World of Usenet, or you are very cautious, which is a nice thing to be,
-really. You will be given questions of the type ``Are you sure you want
-to do this?'' before doing anything dangerous. This is @code{t} by
-default.
-
-@item gnus-expert-user
-@vindex gnus-expert-user
-If this variable is non-@code{nil}, you will seldom be asked any
-questions by Gnus. It will simply assume you know what you're doing, no
-matter how strange.
-
-@item gnus-interactive-catchup
-@vindex gnus-interactive-catchup
-Require confirmation before catching up a group if non-@code{nil}. It
-is @code{t} by default.
-
-@item gnus-interactive-exit
-@vindex gnus-interactive-exit
-Require confirmation before exiting Gnus. This variable is @code{t} by
-default.
-@end table
-
-
-@node Symbolic Prefixes
-@section Symbolic Prefixes
-@cindex symbolic prefixes
-
-Quite a lot of Emacs commands react to the (numeric) prefix. For
-instance, @kbd{C-u 4 C-f} moves point four characters forward, and
-@kbd{C-u 9 0 0 I s s p} adds a permanent @code{Subject} substring score
-rule of 900 to the current article.
-
-This is all nice and well, but what if you want to give a command some
-additional information? Well, what most commands do is interpret the
-``raw'' prefix in some special way. @kbd{C-u 0 C-x C-s} means that one
-doesn't want a backup file to be created when saving the current buffer,
-for instance. But what if you want to save without making a backup
-file, and you want Emacs to flash lights and play a nice tune at the
-same time? You can't, and you're probably perfectly happy that way.
-
-@kindex M-i (Summary)
-@findex gnus-symbolic-argument
-I'm not, so I've added a second prefix---the @dfn{symbolic prefix}. The
-prefix key is @kbd{M-i} (@code{gnus-symbolic-argument}), and the next
-character typed in is the value. You can stack as many @kbd{M-i}
-prefixes as you want. @kbd{M-i a M-C-u} means ``feed the @kbd{M-C-u}
-command the symbolic prefix @code{a}''. @kbd{M-i a M-i b M-C-u} means
-``feed the @kbd{M-C-u} command the symbolic prefixes @code{a} and
-@code{b}''. You get the drift.
-
-Typing in symbolic prefixes to commands that don't accept them doesn't
-hurt, but it doesn't do any good either. Currently not many Gnus
-functions make use of the symbolic prefix.
-
-If you're interested in how Gnus implements this, @pxref{Extended
-Interactive}.
-
-
-@node Formatting Variables
-@section Formatting Variables
-@cindex formatting variables
-
-Throughout this manual you've probably noticed lots of variables called
-things like @code{gnus-group-line-format} and
-@code{gnus-summary-mode-line-format}. These control how Gnus is to
-output lines in the various buffers. There's quite a lot of them.
-Fortunately, they all use the same syntax, so there's not that much to
-be annoyed by.
-
-Here's an example format spec (from the group buffer): @samp{%M%S%5y:
-%(%g%)\n}. We see that it is indeed extremely ugly, and that there are
-lots of percentages everywhere.
-
-@menu
-* Formatting Basics:: A formatting variable is basically a format string.
-* Mode Line Formatting:: Some rules about mode line formatting variables.
-* Advanced Formatting:: Modifying output in various ways.
-* User-Defined Specs:: Having Gnus call your own functions.
-* Formatting Fonts:: Making the formatting look colorful and nice.
-@end menu
-
-Currently Gnus uses the following formatting variables:
-@code{gnus-group-line-format}, @code{gnus-summary-line-format},
-@code{gnus-server-line-format}, @code{gnus-topic-line-format},
-@code{gnus-group-mode-line-format},
-@code{gnus-summary-mode-line-format},
-@code{gnus-article-mode-line-format},
-@code{gnus-server-mode-line-format}, and
-@code{gnus-summary-pick-line-format}.
-
-All these format variables can also be arbitrary elisp forms. In that
-case, they will be @code{eval}ed to insert the required lines.
-
-@kindex M-x gnus-update-format
-@findex gnus-update-format
-Gnus includes a command to help you while creating your own format
-specs. @kbd{M-x gnus-update-format} will @code{eval} the current form,
-update the spec in question and pop you to a buffer where you can
-examine the resulting lisp code to be run to generate the line.
-
-
-
-@node Formatting Basics
-@subsection Formatting Basics
-
-Each @samp{%} element will be replaced by some string or other when the
-buffer in question is generated. @samp{%5y} means ``insert the @samp{y}
-spec, and pad with spaces to get a 5-character field''.
-
-As with normal C and Emacs Lisp formatting strings, the numerical
-modifier between the @samp{%} and the formatting type character will
-@dfn{pad} the output so that it is always at least that long.
-@samp{%5y} will make the field always (at least) five characters wide by
-padding with spaces to the left. If you say @samp{%-5y}, it will pad to
-the right instead.
-
-You may also wish to limit the length of the field to protect against
-particularly wide values. For that you can say @samp{%4,6y}, which
-means that the field will never be more than 6 characters wide and never
-less than 4 characters wide.
-
-
-@node Mode Line Formatting
-@subsection Mode Line Formatting
-
-Mode line formatting variables (e.g.,
-@code{gnus-summary-mode-line-format}) follow the same rules as other,
-buffer line oriented formatting variables (@pxref{Formatting Basics})
-with the following two differences:
-
-@enumerate
-
-@item
-There must be no newline (@samp{\n}) at the end.
-
-@item
-The special @samp{%%b} spec can be used to display the buffer name.
-Well, it's no spec at all, really---@samp{%%} is just a way to quote
-@samp{%} to allow it to pass through the formatting machinery unmangled,
-so that Emacs receives @samp{%b}, which is something the Emacs mode line
-display interprets to mean ``show the buffer name''. For a full list of
-mode line specs Emacs understands, see the documentation of the
-@code{mode-line-format} variable.
-
-@end enumerate
-
-
-@node Advanced Formatting
-@subsection Advanced Formatting
-
-It is frequently useful to post-process the fields in some way.
-Padding, limiting, cutting off parts and suppressing certain values can
-be achieved by using @dfn{tilde modifiers}. A typical tilde spec might
-look like @samp{%~(cut 3)~(ignore "0")y}.
-
-These are the valid modifiers:
-
-@table @code
-@item pad
-@itemx pad-left
-Pad the field to the left with spaces until it reaches the required
-length.
-
-@item pad-right
-Pad the field to the right with spaces until it reaches the required
-length.
-
-@item max
-@itemx max-left
-Cut off characters from the left until it reaches the specified length.
-
-@item max-right
-Cut off characters from the right until it reaches the specified
-length.
-
-@item cut
-@itemx cut-left
-Cut off the specified number of characters from the left.
-
-@item cut-right
-Cut off the specified number of characters from the right.
-
-@item ignore
-Return an empty string if the field is equal to the specified value.
-
-@item form
-Use the specified form as the field value when the @samp{@@} spec is
-used.
-@end table
-
-Let's take an example. The @samp{%o} spec in the summary mode lines
-will return a date in compact ISO8601 format---@samp{19960809T230410}.
-This is quite a mouthful, so we want to shave off the century number and
-the time, leaving us with a six-character date. That would be
-@samp{%~(cut-left 2)~(max-right 6)~(pad 6)o}. (Cutting is done before
-maxing, and we need the padding to ensure that the date is never less
-than 6 characters to make it look nice in columns.)
-
-Ignoring is done first; then cutting; then maxing; and then as the very
-last operation, padding.
-
-If you use lots of these advanced thingies, you'll find that Gnus gets
-quite slow. This can be helped enormously by running @kbd{M-x
-gnus-compile} when you are satisfied with the look of your lines.
-@xref{Compilation}.
-
-
-@node User-Defined Specs
-@subsection User-Defined Specs
-
-All the specs allow for inserting user defined specifiers---@samp{u}.
-The next character in the format string should be a letter. Gnus
-will call the function @code{gnus-user-format-function-}@samp{X}, where
-@samp{X} is the letter following @samp{%u}. The function will be passed
-a single parameter---what the parameter means depends on what buffer
-it's being called from. The function should return a string, which will
-be inserted into the buffer just like information from any other
-specifier. This function may also be called with dummy values, so it
-should protect against that.
-
-You can also use tilde modifiers (@pxref{Advanced Formatting} to achieve
-much the same without defining new functions. Here's an example:
-@samp{%~(form (count-lines (point-min) (point)))@@}. The form
-given here will be evaluated to yield the current line number, and then
-inserted.
-
-
-@node Formatting Fonts
-@subsection Formatting Fonts
-
-There are specs for highlighting, and these are shared by all the format
-variables. Text inside the @samp{%(} and @samp{%)} specifiers will get
-the special @code{mouse-face} property set, which means that it will be
-highlighted (with @code{gnus-mouse-face}) when you put the mouse pointer
-over it.
-
-Text inside the @samp{%@{} and @samp{%@}} specifiers will have their
-normal faces set using @code{gnus-face-0}, which is @code{bold} by
-default. If you say @samp{%1@{}, you'll get @code{gnus-face-1} instead,
-and so on. Create as many faces as you wish. The same goes for the
-@code{mouse-face} specs---you can say @samp{%3(hello%)} to have
-@samp{hello} mouse-highlighted with @code{gnus-mouse-face-3}.
-
-Text inside the @samp{%<} and @samp{%>} specifiers will get the special
-@code{balloon-help} property set to @code{gnus-balloon-face-0}. If you say
-@samp{%1<}, you'll get @code{gnus-balloon-face-1} and so on. The
-@code{gnus-balloon-face-*} variables should be either strings or
-symbols naming functions that return a string. Under @code{balloon-help-mode},
-when the mouse passes over text with this property set, a balloon window
-will appear and display the string. Please refer to the doc string of
-@code{balloon-help-mode} for more information on this.
-
-Here's an alternative recipe for the group buffer:
-
-@lisp
-;; Create three face types.
-(setq gnus-face-1 'bold)
-(setq gnus-face-3 'italic)
-
-;; We want the article count to be in
-;; a bold and green face. So we create
-;; a new face called `my-green-bold'.
-(copy-face 'bold 'my-green-bold)
-;; Set the color.
-(set-face-foreground 'my-green-bold "ForestGreen")
-(setq gnus-face-2 'my-green-bold)
-
-;; Set the new & fancy format.
-(setq gnus-group-line-format
- "%M%S%3@{%5y%@}%2[:%] %(%1@{%g%@}%)\n")
-@end lisp
-
-I'm sure you'll be able to use this scheme to create totally unreadable
-and extremely vulgar displays. Have fun!
-
-Note that the @samp{%(} specs (and friends) do not make any sense on the
-mode-line variables.
-
-
-@node Windows Configuration
-@section Windows Configuration
-@cindex windows configuration
-
-No, there's nothing here about X, so be quiet.
-
-@vindex gnus-use-full-window
-If @code{gnus-use-full-window} non-@code{nil}, Gnus will delete all
-other windows and occupy the entire Emacs screen by itself. It is
-@code{t} by default.
-
-Setting this variable to @code{nil} kinda works, but there are
-glitches. Use at your own peril.
-
-@vindex gnus-buffer-configuration
-@code{gnus-buffer-configuration} describes how much space each Gnus
-buffer should be given. Here's an excerpt of this variable:
-
-@lisp
-((group (vertical 1.0 (group 1.0 point)
- (if gnus-carpal (group-carpal 4))))
- (article (vertical 1.0 (summary 0.25 point)
- (article 1.0))))
-@end lisp
-
-This is an alist. The @dfn{key} is a symbol that names some action or
-other. For instance, when displaying the group buffer, the window
-configuration function will use @code{group} as the key. A full list of
-possible names is listed below.
-
-The @dfn{value} (i.e., the @dfn{split}) says how much space each buffer
-should occupy. To take the @code{article} split as an example -
-
-@lisp
-(article (vertical 1.0 (summary 0.25 point)
- (article 1.0)))
-@end lisp
-
-This @dfn{split} says that the summary buffer should occupy 25% of upper
-half of the screen, and that it is placed over the article buffer. As
-you may have noticed, 100% + 25% is actually 125% (yup, I saw y'all
-reaching for that calculator there). However, the special number
-@code{1.0} is used to signal that this buffer should soak up all the
-rest of the space available after the rest of the buffers have taken
-whatever they need. There should be only one buffer with the @code{1.0}
-size spec per split.
-
-Point will be put in the buffer that has the optional third element
-@code{point}. In a @code{frame} split, the last subsplit having a leaf
-split where the tag @code{frame-focus} is a member (i.e. is the third or
-fourth element in the list, depending on whether the @code{point} tag is
-present) gets focus.
-
-Here's a more complicated example:
-
-@lisp
-(article (vertical 1.0 (group 4)
- (summary 0.25 point)
- (if gnus-carpal (summary-carpal 4))
- (article 1.0)))
-@end lisp
-
-If the size spec is an integer instead of a floating point number,
-then that number will be used to say how many lines a buffer should
-occupy, not a percentage.
-
-If the @dfn{split} looks like something that can be @code{eval}ed (to be
-precise---if the @code{car} of the split is a function or a subr), this
-split will be @code{eval}ed. If the result is non-@code{nil}, it will
-be used as a split. This means that there will be three buffers if
-@code{gnus-carpal} is @code{nil}, and four buffers if @code{gnus-carpal}
-is non-@code{nil}.
-
-Not complicated enough for you? Well, try this on for size:
-
-@lisp
-(article (horizontal 1.0
- (vertical 0.5
- (group 1.0)
- (gnus-carpal 4))
- (vertical 1.0
- (summary 0.25 point)
- (summary-carpal 4)
- (article 1.0))))
-@end lisp
-
-Whoops. Two buffers with the mystery 100% tag. And what's that
-@code{horizontal} thingie?
-
-If the first element in one of the split is @code{horizontal}, Gnus will
-split the window horizontally, giving you two windows side-by-side.
-Inside each of these strips you may carry on all you like in the normal
-fashion. The number following @code{horizontal} says what percentage of
-the screen is to be given to this strip.
-
-For each split, there @emph{must} be one element that has the 100% tag.
-The splitting is never accurate, and this buffer will eat any leftover
-lines from the splits.
-
-To be slightly more formal, here's a definition of what a valid split
-may look like:
-
-@example
-split = frame | horizontal | vertical | buffer | form
-frame = "(frame " size *split ")"
-horizontal = "(horizontal " size *split ")"
-vertical = "(vertical " size *split ")"
-buffer = "(" buffer-name " " size *[ "point" ] *[ "frame-focus"] ")"
-size = number | frame-params
-buffer-name = group | article | summary ...
-@end example
-
-The limitations are that the @code{frame} split can only appear as the
-top-level split. @var{form} should be an Emacs Lisp form that should
-return a valid split. We see that each split is fully recursive, and
-may contain any number of @code{vertical} and @code{horizontal} splits.
-
-@vindex gnus-window-min-width
-@vindex gnus-window-min-height
-@cindex window height
-@cindex window width
-Finding the right sizes can be a bit complicated. No window may be less
-than @code{gnus-window-min-height} (default 1) characters high, and all
-windows must be at least @code{gnus-window-min-width} (default 1)
-characters wide. Gnus will try to enforce this before applying the
-splits. If you want to use the normal Emacs window width/height limit,
-you can just set these two variables to @code{nil}.
-
-If you're not familiar with Emacs terminology, @code{horizontal} and
-@code{vertical} splits may work the opposite way of what you'd expect.
-Windows inside a @code{horizontal} split are shown side-by-side, and
-windows within a @code{vertical} split are shown above each other.
-
-@findex gnus-configure-frame
-If you want to experiment with window placement, a good tip is to call
-@code{gnus-configure-frame} directly with a split. This is the function
-that does all the real work when splitting buffers. Below is a pretty
-nonsensical configuration with 5 windows; two for the group buffer and
-three for the article buffer. (I said it was nonsensical.) If you
-@code{eval} the statement below, you can get an idea of how that would
-look straight away, without going through the normal Gnus channels.
-Play with it until you're satisfied, and then use
-@code{gnus-add-configuration} to add your new creation to the buffer
-configuration list.
-
-@lisp
-(gnus-configure-frame
- '(horizontal 1.0
- (vertical 10
- (group 1.0)
- (article 0.3 point))
- (vertical 1.0
- (article 1.0)
- (horizontal 4
- (group 1.0)
- (article 10)))))
-@end lisp
-
-You might want to have several frames as well. No prob---just use the
-@code{frame} split:
-
-@lisp
-(gnus-configure-frame
- '(frame 1.0
- (vertical 1.0
- (summary 0.25 point frame-focus)
- (article 1.0))
- (vertical ((height . 5) (width . 15)
- (user-position . t)
- (left . -1) (top . 1))
- (picon 1.0))))
-
-@end lisp
-
-This split will result in the familiar summary/article window
-configuration in the first (or ``main'') frame, while a small additional
-frame will be created where picons will be shown. As you can see,
-instead of the normal @code{1.0} top-level spec, each additional split
-should have a frame parameter alist as the size spec.
-@xref{Frame Parameters, , Frame Parameters, elisp, The GNU Emacs Lisp
-Reference Manual}. Under XEmacs, a frame property list will be
-accepted, too---for instance, @code{(height 5 width 15 left -1 top 1)}
-is such a plist.
-
-Here's a list of all possible keys for
-@code{gnus-buffer-configuration}:
-
-@code{group}, @code{summary}, @code{article}, @code{server},
-@code{browse}, @code{message}, @code{pick}, @code{info},
-@code{summary-faq}, @code{edit-group}, @code{edit-server},
-@code{edit-score}, @code{post}, @code{reply}, @code{forward},
-@code{reply-yank}, @code{mail-bounce}, @code{draft}, @code{pipe},
-@code{bug}, @code{compose-bounce}, and @code{score-trace}.
-
-Note that the @code{message} key is used for both
-@code{gnus-group-mail} and @code{gnus-summary-mail-other-window}. If
-it is desirable to distinguish between the two, something like this
-might be used:
-
-@lisp
-(message (horizontal 1.0
- (vertical 1.0 (message 1.0 point))
- (vertical 0.24
- (if (buffer-live-p gnus-summary-buffer)
- '(summary 0.5))
- (group 1.0)))))
-@end lisp
-
-@findex gnus-add-configuration
-Since the @code{gnus-buffer-configuration} variable is so long and
-complicated, there's a function you can use to ease changing the config
-of a single setting: @code{gnus-add-configuration}. If, for instance,
-you want to change the @code{article} setting, you could say:
-
-@lisp
-(gnus-add-configuration
- '(article (vertical 1.0
- (group 4)
- (summary .25 point)
- (article 1.0))))
-@end lisp
-
-You'd typically stick these @code{gnus-add-configuration} calls in your
-@file{.gnus.el} file or in some startup hook---they should be run after
-Gnus has been loaded.
-
-@vindex gnus-always-force-window-configuration
-If all windows mentioned in the configuration are already visible, Gnus
-won't change the window configuration. If you always want to force the
-``right'' window configuration, you can set
-@code{gnus-always-force-window-configuration} to non-@code{nil}.
-
-If you're using tree displays (@pxref{Tree Display}), and the tree
-window is displayed vertically next to another window, you may also want
-to fiddle with @code{gnus-tree-minimize-window} to avoid having the
-windows resized.
-
-
-@node Faces and Fonts
-@section Faces and Fonts
-@cindex faces
-@cindex fonts
-@cindex colors
-
-Fiddling with fonts and faces used to be very difficult, but these days
-it is very simple. You simply say @kbd{M-x customize-face}, pick out
-the face you want to alter, and alter it via the standard Customize
-interface.
-
-
-@node Compilation
-@section Compilation
-@cindex compilation
-@cindex byte-compilation
-
-@findex gnus-compile
-
-Remember all those line format specification variables?
-@code{gnus-summary-line-format}, @code{gnus-group-line-format}, and so
-on. Now, Gnus will of course heed whatever these variables are, but,
-unfortunately, changing them will mean a quite significant slow-down.
-(The default values of these variables have byte-compiled functions
-associated with them, while the user-generated versions do not, of
-course.)
-
-To help with this, you can run @kbd{M-x gnus-compile} after you've
-fiddled around with the variables and feel that you're (kind of)
-satisfied. This will result in the new specs being byte-compiled, and
-you'll get top speed again. Gnus will save these compiled specs in the
-@file{.newsrc.eld} file. (User-defined functions aren't compiled by
-this function, though---you should compile them yourself by sticking
-them into the @code{.gnus.el} file and byte-compiling that file.)
-
-
-@node Mode Lines
-@section Mode Lines
-@cindex mode lines
-
-@vindex gnus-updated-mode-lines
-@code{gnus-updated-mode-lines} says what buffers should keep their mode
-lines updated. It is a list of symbols. Supported symbols include
-@code{group}, @code{article}, @code{summary}, @code{server},
-@code{browse}, and @code{tree}. If the corresponding symbol is present,
-Gnus will keep that mode line updated with information that may be
-pertinent. If this variable is @code{nil}, screen refresh may be
-quicker.
-
-@cindex display-time
-
-@vindex gnus-mode-non-string-length
-By default, Gnus displays information on the current article in the mode
-lines of the summary and article buffers. The information Gnus wishes
-to display (e.g. the subject of the article) is often longer than the
-mode lines, and therefore have to be cut off at some point. The
-@code{gnus-mode-non-string-length} variable says how long the other
-elements on the line is (i.e., the non-info part). If you put
-additional elements on the mode line (e.g. a clock), you should modify
-this variable:
-
-@c Hook written by Francesco Potorti` <pot@cnuce.cnr.it>
-@lisp
-(add-hook 'display-time-hook
- (lambda () (setq gnus-mode-non-string-length
- (+ 21
- (if line-number-mode 5 0)
- (if column-number-mode 4 0)
- (length display-time-string)))))
-@end lisp
-
-If this variable is @code{nil} (which is the default), the mode line
-strings won't be chopped off, and they won't be padded either. Note
-that the default is unlikely to be desirable, as even the percentage
-complete in the buffer may be crowded off the mode line; the user should
-configure this variable appropriately for her configuration.
-
-
-@node Highlighting and Menus
-@section Highlighting and Menus
-@cindex visual
-@cindex highlighting
-@cindex menus
-
-@vindex gnus-visual
-The @code{gnus-visual} variable controls most of the Gnus-prettifying
-aspects. If @code{nil}, Gnus won't attempt to create menus or use fancy
-colors or fonts. This will also inhibit loading the @file{gnus-vis.el}
-file.
-
-This variable can be a list of visual properties that are enabled. The
-following elements are valid, and are all included by default:
-
-@table @code
-@item group-highlight
-Do highlights in the group buffer.
-@item summary-highlight
-Do highlights in the summary buffer.
-@item article-highlight
-Do highlights according to @code{gnus-article-display-hook} in the
-article buffer.
-@item highlight
-Turn on highlighting in all buffers.
-@item group-menu
-Create menus in the group buffer.
-@item summary-menu
-Create menus in the summary buffers.
-@item article-menu
-Create menus in the article buffer.
-@item browse-menu
-Create menus in the browse buffer.
-@item server-menu
-Create menus in the server buffer.
-@item score-menu
-Create menus in the score buffers.
-@item menu
-Create menus in all buffers.
-@end table
-
-So if you only want highlighting in the article buffer and menus in all
-buffers, you could say something like:
-
-@lisp
-(setq gnus-visual '(article-highlight menu))
-@end lisp
-
-If you want highlighting only and no menus whatsoever, you'd say:
-
-@lisp
-(setq gnus-visual '(highlight))
-@end lisp
-
-If @code{gnus-visual} is @code{t}, highlighting and menus will be used
-in all Gnus buffers.
-
-Other general variables that influence the look of all buffers include:
-
-@table @code
-@item gnus-mouse-face
-@vindex gnus-mouse-face
-This is the face (i.e., font) used for mouse highlighting in Gnus. No
-mouse highlights will be done if @code{gnus-visual} is @code{nil}.
-
-@end table
-
-There are hooks associated with the creation of all the different menus:
-
-@table @code
-
-@item gnus-article-menu-hook
-@vindex gnus-article-menu-hook
-Hook called after creating the article mode menu.
-
-@item gnus-group-menu-hook
-@vindex gnus-group-menu-hook
-Hook called after creating the group mode menu.
-
-@item gnus-summary-menu-hook
-@vindex gnus-summary-menu-hook
-Hook called after creating the summary mode menu.
-
-@item gnus-server-menu-hook
-@vindex gnus-server-menu-hook
-Hook called after creating the server mode menu.
-
-@item gnus-browse-menu-hook
-@vindex gnus-browse-menu-hook
-Hook called after creating the browse mode menu.
-
-@item gnus-score-menu-hook
-@vindex gnus-score-menu-hook
-Hook called after creating the score mode menu.
-
-@end table
-
-
-@node Buttons
-@section Buttons
-@cindex buttons
-@cindex mouse
-@cindex click
-
-Those new-fangled @dfn{mouse} contraptions is very popular with the
-young, hep kids who don't want to learn the proper way to do things
-these days. Why, I remember way back in the summer of '89, when I was
-using Emacs on a Tops 20 system. Three hundred users on one single
-machine, and every user was running Simula compilers. Bah!
-
-Right.
-
-@vindex gnus-carpal
-Well, you can make Gnus display bufferfuls of buttons you can click to
-do anything by setting @code{gnus-carpal} to @code{t}. Pretty simple,
-really. Tell the chiropractor I sent you.
-
-
-@table @code
-
-@item gnus-carpal-mode-hook
-@vindex gnus-carpal-mode-hook
-Hook run in all carpal mode buffers.
-
-@item gnus-carpal-button-face
-@vindex gnus-carpal-button-face
-Face used on buttons.
-
-@item gnus-carpal-header-face
-@vindex gnus-carpal-header-face
-Face used on carpal buffer headers.
-
-@item gnus-carpal-group-buffer-buttons
-@vindex gnus-carpal-group-buffer-buttons
-Buttons in the group buffer.
-
-@item gnus-carpal-summary-buffer-buttons
-@vindex gnus-carpal-summary-buffer-buttons
-Buttons in the summary buffer.
-
-@item gnus-carpal-server-buffer-buttons
-@vindex gnus-carpal-server-buffer-buttons
-Buttons in the server buffer.
-
-@item gnus-carpal-browse-buffer-buttons
-@vindex gnus-carpal-browse-buffer-buttons
-Buttons in the browse buffer.
-@end table
-
-All the @code{buttons} variables are lists. The elements in these list
-are either cons cells where the @code{car} contains a text to be displayed and
-the @code{cdr} contains a function symbol, or a simple string.
-
-
-@node Daemons
-@section Daemons
-@cindex demons
-@cindex daemons
-
-Gnus, being larger than any program ever written (allegedly), does lots
-of strange stuff that you may wish to have done while you're not
-present. For instance, you may want it to check for new mail once in a
-while. Or you may want it to close down all connections to all servers
-when you leave Emacs idle. And stuff like that.
-
-Gnus will let you do stuff like that by defining various
-@dfn{handlers}. Each handler consists of three elements: A
-@var{function}, a @var{time}, and an @var{idle} parameter.
-
-Here's an example of a handler that closes connections when Emacs has
-been idle for thirty minutes:
-
-@lisp
-(gnus-demon-close-connections nil 30)
-@end lisp
-
-Here's a handler that scans for PGP headers every hour when Emacs is
-idle:
-
-@lisp
-(gnus-demon-scan-pgp 60 t)
-@end lisp
-
-This @var{time} parameter and than @var{idle} parameter work together
-in a strange, but wonderful fashion. Basically, if @var{idle} is
-@code{nil}, then the function will be called every @var{time} minutes.
-
-If @var{idle} is @code{t}, then the function will be called after
-@var{time} minutes only if Emacs is idle. So if Emacs is never idle,
-the function will never be called. But once Emacs goes idle, the
-function will be called every @var{time} minutes.
-
-If @var{idle} is a number and @var{time} is a number, the function will
-be called every @var{time} minutes only when Emacs has been idle for
-@var{idle} minutes.
-
-If @var{idle} is a number and @var{time} is @code{nil}, the function
-will be called once every time Emacs has been idle for @var{idle}
-minutes.
-
-And if @var{time} is a string, it should look like @samp{07:31}, and
-the function will then be called once every day somewhere near that
-time. Modified by the @var{idle} parameter, of course.
-
-@vindex gnus-demon-timestep
-(When I say ``minute'' here, I really mean @code{gnus-demon-timestep}
-seconds. This is 60 by default. If you change that variable,
-all the timings in the handlers will be affected.)
-
-@vindex gnus-use-demon
-To set the whole thing in motion, though, you have to set
-@code{gnus-use-demon} to @code{t}.
-
-So, if you want to add a handler, you could put something like this in
-your @file{.gnus} file:
-
-@findex gnus-demon-add-handler
-@lisp
-(gnus-demon-add-handler 'gnus-demon-close-connections 30 t)
-@end lisp
-
-@findex gnus-demon-add-nocem
-@findex gnus-demon-add-scanmail
-@findex gnus-demon-add-rescan
-@findex gnus-demon-add-scan-timestamps
-@findex gnus-demon-add-disconnection
-Some ready-made functions to do this have been created:
-@code{gnus-demon-add-nocem}, @code{gnus-demon-add-disconnection},
-@code{gnus-demon-add-nntp-close-connection},
-@code{gnus-demon-add-scan-timestamps}, @code{gnus-demon-add-rescan}, and
-@code{gnus-demon-add-scanmail}. Just put those functions in your
-@file{.gnus} if you want those abilities.
-
-@findex gnus-demon-init
-@findex gnus-demon-cancel
-@vindex gnus-demon-handlers
-If you add handlers to @code{gnus-demon-handlers} directly, you should
-run @code{gnus-demon-init} to make the changes take hold. To cancel all
-daemons, you can use the @code{gnus-demon-cancel} function.
-
-Note that adding daemons can be pretty naughty if you over do it. Adding
-functions that scan all news and mail from all servers every two seconds
-is a sure-fire way of getting booted off any respectable system. So
-behave.
-
-
-@node NoCeM
-@section NoCeM
-@cindex nocem
-@cindex spam
-
-@dfn{Spamming} is posting the same article lots and lots of times.
-Spamming is bad. Spamming is evil.
-
-Spamming is usually canceled within a day or so by various anti-spamming
-agencies. These agencies usually also send out @dfn{NoCeM} messages.
-NoCeM is pronounced ``no see-'em'', and means what the name
-implies---these are messages that make the offending articles, like, go
-away.
-
-What use are these NoCeM messages if the articles are canceled anyway?
-Some sites do not honor cancel messages and some sites just honor cancels
-from a select few people. Then you may wish to make use of the NoCeM
-messages, which are distributed in the @samp{alt.nocem.misc} newsgroup.
-
-Gnus can read and parse the messages in this group automatically, and
-this will make spam disappear.
-
-There are some variables to customize, of course:
-
-@table @code
-@item gnus-use-nocem
-@vindex gnus-use-nocem
-Set this variable to @code{t} to set the ball rolling. It is @code{nil}
-by default.
-
-@item gnus-nocem-groups
-@vindex gnus-nocem-groups
-Gnus will look for NoCeM messages in the groups in this list. The
-default is @code{("news.lists.filters" "news.admin.net-abuse.bulletins"
-"alt.nocem.misc" "news.admin.net-abuse.announce")}.
-
-@item gnus-nocem-issuers
-@vindex gnus-nocem-issuers
-There are many people issuing NoCeM messages. This list says what
-people you want to listen to. The default is @code{("Automoose-1"
-"rbraver@@ohww.norman.ok.us" "clewis@@ferret.ocunix.on.ca"
-"jem@@xpat.com" "snowhare@@xmission.com" "red@@redpoll.mrfs.oh.us
-(Richard E. Depew)")}; fine, upstanding citizens all of them.
-
-Known despammers that you can put in this list include:
-
-@table @samp
-@item clewis@@ferret.ocunix.on.ca;
-@cindex Chris Lewis
-Chris Lewis---Major Canadian despammer who has probably canceled more
-usenet abuse than anybody else.
-
-@item Automoose-1
-@cindex CancelMoose[tm]
-The CancelMoose[tm] on autopilot. The CancelMoose[tm] is reputed to be
-Norwegian, and was the person(s) who invented NoCeM.
-
-@item jem@@xpat.com;
-@cindex Jem
-John Milburn---despammer located in Korea who is getting very busy these
-days.
-
-@item red@@redpoll.mrfs.oh.us (Richard E. Depew)
-Richard E. Depew---lone American despammer. He mostly cancels binary
-postings to non-binary groups and removes spews (regurgitated articles).
-@end table
-
-You do not have to heed NoCeM messages from all these people---just the
-ones you want to listen to. You also don't have to accept all NoCeM
-messages from the people you like. Each NoCeM message has a @dfn{type}
-header that gives the message a (more or less, usually less) rigorous
-definition. Common types are @samp{spam}, @samp{spew}, @samp{mmf},
-@samp{binary}, and @samp{troll}. To specify this, you have to use
-@var{(issuer conditions ...)} elements in the list. Each condition is
-either a string (which is a regexp that matches types you want to use)
-or a list on the form @code{(not STRING)}, where @var{string} is a
-regexp that matches types you don't want to use.
-
-For instance, if you want all NoCeM messages from Chris Lewis except his
-@samp{troll} messages, you'd say:
-
-@lisp
-("clewis@@ferret.ocunix.on.ca" ".*" (not "troll"))
-@end lisp
-
-On the other hand, if you just want nothing but his @samp{spam} and
-@samp{spew} messages, you'd say:
-
-@lisp
-("clewis@@ferret.ocunix.on.ca" (not ".*") "spew" "spam")
-@end lisp
-
-The specs are applied left-to-right.
-
-
-@item gnus-nocem-verifyer
-@vindex gnus-nocem-verifyer
-@findex mc-verify
-This should be a function for verifying that the NoCeM issuer is who she
-says she is. The default is @code{mc-verify}, which is a Mailcrypt
-function. If this is too slow and you don't care for verification
-(which may be dangerous), you can set this variable to @code{nil}.
-
-If you want signed NoCeM messages to be verified and unsigned messages
-not to be verified (but used anyway), you could do something like:
-
-@lisp
-(setq gnus-nocem-verifyer 'my-gnus-mc-verify)
-
-(defun my-gnus-mc-verify ()
- (not (eq 'forged
- (ignore-errors
- (if (mc-verify)
- t
- 'forged)))))
-@end lisp
-
-This might be dangerous, though.
-
-@item gnus-nocem-directory
-@vindex gnus-nocem-directory
-This is where Gnus will store its NoCeM cache files. The default is
-@file{~/News/NoCeM/}.
-
-@item gnus-nocem-expiry-wait
-@vindex gnus-nocem-expiry-wait
-The number of days before removing old NoCeM entries from the cache.
-The default is 15. If you make it shorter Gnus will be faster, but you
-might then see old spam.
-
-@end table
-
-Using NoCeM could potentially be a memory hog. If you have many living
-(i. e., subscribed or unsubscribed groups), your Emacs process will grow
-big. If this is a problem, you should kill off all (or most) of your
-unsubscribed groups (@pxref{Subscription Commands}).
-
-
-@node Undo
-@section Undo
-@cindex undo
-
-It is very useful to be able to undo actions one has done. In normal
-Emacs buffers, it's easy enough---you just push the @code{undo} button.
-In Gnus buffers, however, it isn't that simple.
-
-The things Gnus displays in its buffer is of no value whatsoever to
-Gnus---it's all just data designed to look nice to the user.
-Killing a group in the group buffer with @kbd{C-k} makes the line
-disappear, but that's just a side-effect of the real action---the
-removal of the group in question from the internal Gnus structures.
-Undoing something like that can't be done by the normal Emacs
-@code{undo} function.
-
-Gnus tries to remedy this somewhat by keeping track of what the user
-does and coming up with actions that would reverse the actions the user
-takes. When the user then presses the @code{undo} key, Gnus will run
-the code to reverse the previous action, or the previous actions.
-However, not all actions are easily reversible, so Gnus currently offers
-a few key functions to be undoable. These include killing groups,
-yanking groups, and changing the list of read articles of groups.
-That's it, really. More functions may be added in the future, but each
-added function means an increase in data to be stored, so Gnus will
-never be totally undoable.
-
-@findex gnus-undo-mode
-@vindex gnus-use-undo
-@findex gnus-undo
-The undoability is provided by the @code{gnus-undo-mode} minor mode. It
-is used if @code{gnus-use-undo} is non-@code{nil}, which is the
-default. The @kbd{M-C-_} key performs the @code{gnus-undo} command
-command, which should feel kinda like the normal Emacs @code{undo}
-command.
-
-
-@node Moderation
-@section Moderation
-@cindex moderation
-
-If you are a moderator, you can use the @file{gnus-mdrtn.el} package.
-It is not included in the standard Gnus package. Write a mail to
-@samp{larsi@@gnus.org} and state what group you moderate, and you'll
-get a copy.
-
-The moderation package is implemented as a minor mode for summary
-buffers. Put
-
-@lisp
-(add-hook 'gnus-summary-mode-hook 'gnus-moderate)
-@end lisp
-
-in your @file{.gnus.el} file.
-
-If you are the moderator of @samp{rec.zoofle}, this is how it's
-supposed to work:
-
-@enumerate
-@item
-You split your incoming mail by matching on
-@samp{Newsgroups:.*rec.zoofle}, which will put all the to-be-posted
-articles in some mail group---for instance, @samp{nnml:rec.zoofle}.
-
-@item
-You enter that group once in a while and post articles using the @kbd{e}
-(edit-and-post) or @kbd{s} (just send unedited) commands.
-
-@item
-If, while reading the @samp{rec.zoofle} newsgroup, you happen upon some
-articles that weren't approved by you, you can cancel them with the
-@kbd{c} command.
-@end enumerate
-
-To use moderation mode in these two groups, say:
-
-@lisp
-(setq gnus-moderated-list
- "^nnml:rec.zoofle$\\|^rec.zoofle$")
-@end lisp
-
-
-@node XEmacs Enhancements
-@section XEmacs Enhancements
-@cindex XEmacs
-
-XEmacs is able to display pictures and stuff, so Gnus has taken
-advantage of that.
-
-@menu
-* Picons:: How to display pictures of what your reading.
-* Smileys:: Show all those happy faces the way they were meant to be shown.
-* Toolbar:: Click'n'drool.
-* XVarious:: Other XEmacsy Gnusey variables.
-@end menu
-
-
-@node Picons
-@subsection Picons
-
-@iftex
-@iflatex
-\include{picons}
-@end iflatex
-@end iftex
-
-So... You want to slow down your news reader even more! This is a
-good way to do so. Its also a great way to impress people staring
-over your shoulder as you read news.
-
-@menu
-* Picon Basics:: What are picons and How do I get them.
-* Picon Requirements:: Don't go further if you aren't using XEmacs.
-* Easy Picons:: Displaying Picons---the easy way.
-* Hard Picons:: The way you should do it. You'll learn something.
-* Picon Useless Configuration:: Other variables you can trash/tweak/munge/play with.
-@end menu
-
-
-@node Picon Basics
-@subsubsection Picon Basics
-
-What are Picons? To quote directly from the Picons Web site:
-
-@iftex
-@iflatex
-\margindex{}
-@end iflatex
-@end iftex
-
-@quotation
-@dfn{Picons} is short for ``personal icons''. They're small,
-constrained images used to represent users and domains on the net,
-organized into databases so that the appropriate image for a given
-e-mail address can be found. Besides users and domains, there are picon
-databases for Usenet newsgroups and weather forecasts. The picons are
-in either monochrome @code{XBM} format or color @code{XPM} and
-@code{GIF} formats.
-@end quotation
-
-@vindex gnus-picons-piconsearch-url
-If you have a permanent connection to the Internet you can use Steve
-Kinzler's Picons Search engine by setting
-@code{gnus-picons-piconsearch-url} to the string @*
-@file{http://www.cs.indiana.edu/picons/search.html}.
-
-@vindex gnus-picons-database
-Otherwise you need a local copy of his database. For instructions on
-obtaining and installing the picons databases, point your Web browser at @*
-@file{http://www.cs.indiana.edu/picons/ftp/index.html}. Gnus expects
-picons to be installed into a location pointed to by
-@code{gnus-picons-database}.
-
-
-@node Picon Requirements
-@subsubsection Picon Requirements
-
-To have Gnus display Picons for you, you must be running XEmacs
-19.13 or greater since all other versions of Emacs aren't yet able to
-display images.
-
-Additionally, you must have @code{x} support compiled into XEmacs. To
-display color picons which are much nicer than the black & white one,
-you also need one of @code{xpm} or @code{gif} compiled into XEmacs.
-
-@vindex gnus-picons-convert-x-face
-If you want to display faces from @code{X-Face} headers, you should have
-the @code{xface} support compiled into XEmacs. Otherwise you must have
-the @code{netpbm} utilities installed, or munge the
-@code{gnus-picons-convert-x-face} variable to use something else.
-
-
-@node Easy Picons
-@subsubsection Easy Picons
-
-To enable displaying picons, simply put the following line in your
-@file{~/.gnus} file and start Gnus.
-
-@lisp
-(setq gnus-use-picons t)
-(add-hook 'gnus-article-display-hook
- 'gnus-article-display-picons t)
-(add-hook 'gnus-article-display-hook
- 'gnus-picons-article-display-x-face)
-@end lisp
-
-and make sure @code{gnus-picons-database} points to the directory
-containing the Picons databases.
-
-Alternatively if you want to use the web piconsearch engine add this:
-
-@lisp
-(setq gnus-picons-piconsearch-url
- "http://www.cs.indiana.edu:800/piconsearch")
-@end lisp
-
-
-@node Hard Picons
-@subsubsection Hard Picons
-
-@iftex
-@iflatex
-\margindex{}
-@end iflatex
-@end iftex
-
-Gnus can display picons for you as you enter and leave groups and
-articles. It knows how to interact with three sections of the picons
-database. Namely, it can display the picons newsgroup pictures,
-author's face picture(s), and the authors domain. To enable this
-feature, you need to select where to get the picons from, and where to
-display them.
-
-@table @code
-
-@item gnus-picons-database
-@vindex gnus-picons-database
-The location of the picons database. Should point to a directory
-containing the @file{news}, @file{domains}, @file{users} (and so on)
-subdirectories. This is only useful if
-@code{gnus-picons-piconsearch-url} is @code{nil}. Defaults to
-@file{/usr/local/faces/}.
-
-@item gnus-picons-piconsearch-url
-@vindex gnus-picons-piconsearch-url
-The URL for the web picons search engine. The only currently known
-engine is @file{http://www.cs.indiana.edu:800/piconsearch}. To
-workaround network delays, icons will be fetched in the background. If
-this is @code{nil} 'the default), then picons are fetched from local
-database indicated by @code{gnus-picons-database}.
-
-@item gnus-picons-display-where
-@vindex gnus-picons-display-where
-Where the picon images should be displayed. It is @code{picons} by
-default (which by default maps to the buffer @samp{*Picons*}). Other
-valid places could be @code{article}, @code{summary}, or
-@samp{*scratch*} for all I care. Just make sure that you've made the
-buffer visible using the standard Gnus window configuration
-routines---@pxref{Windows Configuration}.
-
-@item gnus-picons-group-excluded-groups
-@vindex gnus-picons-group-excluded-groups
-Groups that are matched by this regexp won't have their group icons
-displayed.
-
-@end table
-
-Note: If you set @code{gnus-use-picons} to @code{t}, it will set up your
-window configuration for you to include the @code{picons} buffer.
-
-Now that you've made those decision, you need to add the following
-functions to the appropriate hooks so these pictures will get displayed
-at the right time.
-
-@vindex gnus-article-display-hook
-@vindex gnus-picons-display-where
-@table @code
-@item gnus-article-display-picons
-@findex gnus-article-display-picons
-Looks up and displays the picons for the author and the author's domain
-in the @code{gnus-picons-display-where} buffer. Should be added to the
-@code{gnus-article-display-hook}.
-
-@item gnus-picons-article-display-x-face
-@findex gnus-article-display-picons
-Decodes and displays the X-Face header if present. This function
-should be added to @code{gnus-article-display-hook}.
-
-@end table
-
-Note: You must append them to the hook, so make sure to specify 't'
-for the append flag of @code{add-hook}:
-
-@lisp
-(add-hook 'gnus-article-display-hook 'gnus-article-display-picons t)
-@end lisp
-
-
-@node Picon Useless Configuration
-@subsubsection Picon Useless Configuration
-
-@iftex
-@iflatex
-\margindex{}
-@end iflatex
-@end iftex
-
-The following variables offer further control over how things are
-done, where things are located, and other useless stuff you really
-don't need to worry about.
-
-@table @code
-
-@item gnus-picons-news-directories
-@vindex gnus-picons-news-directories
-List of subdirectories to search in @code{gnus-picons-database} for
-newsgroups faces. @code{("news")} is the default.
-
-@item gnus-picons-user-directories
-@vindex gnus-picons-user-directories
-List of subdirectories to search in @code{gnus-picons-database} for user
-faces. @code{("local" "users" "usenix" "misc")} is the default.
-
-@item gnus-picons-domain-directories
-@vindex gnus-picons-domain-directories
-List of subdirectories to search in @code{gnus-picons-database} for
-domain name faces. Defaults to @code{("domains")}. Some people may
-want to add @samp{"unknown"} to this list.
-
-@item gnus-picons-convert-x-face
-@vindex gnus-picons-convert-x-face
-If you don't have @code{xface} support builtin XEmacs, this is the
-command to use to convert the @code{X-Face} header to an X bitmap
-(@code{xbm}). Defaults to @code{(format "@{ echo '/* Width=48,
-Height=48 */'; uncompface; @} | icontopbm | pbmtoxbm > %s"
-gnus-picons-x-face-file-name)}
-
-@item gnus-picons-x-face-file-name
-@vindex gnus-picons-x-face-file-name
-Names a temporary file to store the @code{X-Face} bitmap in. Defaults
-to @code{(format "/tmp/picon-xface.%s.xbm" (user-login-name))}.
-
-@item gnus-picons-has-modeline-p
-@vindex gnus-picons-has-modeline-p
-If you have set @code{gnus-picons-display-where} to @code{picons}, your
-XEmacs frame will become really cluttered. To alleviate this a bit you
-can set @code{gnus-picons-has-modeline-p} to @code{nil}; this will
-remove the mode line from the Picons buffer. This is only useful if
-@code{gnus-picons-display-where} is @code{picons}.
-
-@item gnus-picons-refresh-before-display
-@vindex gnus-picons-refresh-before-display
-If non-nil, display the article buffer before computing the picons.
-Defaults to @code{nil}.
-
-@item gnus-picons-display-as-address
-@vindex gnus-picons-display-as-address
-If @code{t} display textual email addresses along with pictures.
-Defaults to @code{t}.
-
-@item gnus-picons-file-suffixes
-@vindex gnus-picons-file-suffixes
-Ordered list of suffixes on picon file names to try. Defaults to
-@code{("xpm" "gif" "xbm")} minus those not builtin your XEmacs.
-
-@item gnus-picons-display-article-move-p
-@vindex gnus-picons-display-article-move-p
-Whether to move point to first empty line when displaying picons. This
-has only an effect if `gnus-picons-display-where' has value `article'.
-
-@item gnus-picons-clear-cache-on-shutdown
-@vindex gnus-picons-clear-cache-on-shutdown
-Whether to clear the picons cache when exiting gnus. Gnus caches every
-picons it finds while it is running. This saves some time in the search
-process but eats some memory. If this variable is set to @code{nil},
-Gnus will never clear the cache itself; you will have to manually call
-@code{gnus-picons-clear-cache} to clear it. Otherwise the cache will be
-cleared every time you exit Gnus. Defaults to @code{t}.
-
-@iftex
-@iflatex
-\margindex{}
-@end iflatex
-@end iftex
-
-@end table
-
-@node Smileys
-@subsection Smileys
-@cindex smileys
-
-@iftex
-@iflatex
-\gnusfig{-3cm}{0.5cm}{\epsfig{figure=tmp/BigFace.ps,height=20cm}}
-\input{smiley}
-@end iflatex
-@end iftex
-
-@dfn{Smiley} is a package separate from Gnus, but since Gnus is
-currently the only package that uses Smiley, it is documented here.
-
-In short---to use Smiley in Gnus, put the following in your
-@file{.gnus.el} file:
-
-@lisp
-(add-hook 'gnus-article-display-hook 'gnus-smiley-display t)
-@end lisp
-
-Smiley maps text smiley faces---@samp{:-)}, @samp{:-=}, @samp{:-(} and
-the like---to pictures and displays those instead of the text smiley
-faces. The conversion is controlled by a list of regexps that matches
-text and maps that to file names.
-
-@vindex smiley-nosey-regexp-alist
-@vindex smiley-deformed-regexp-alist
-Smiley supplies two example conversion alists by default:
-@code{smiley-deformed-regexp-alist} (which matches @samp{:)}, @samp{:(}
-and so on), and @code{smiley-nosey-regexp-alist} (which matches
-@samp{:-)}, @samp{:-(} and so on).
-
-The alist used is specified by the @code{smiley-regexp-alist} variable,
-which defaults to the value of @code{smiley-deformed-regexp-alist}.
-
-The first item in each element is the regexp to be matched; the second
-element is the regexp match group that is to be replaced by the picture;
-and the third element is the name of the file to be displayed.
-
-The following variables customize where Smiley will look for these
-files, as well as the color to be used and stuff:
-
-@table @code
-
-@item smiley-data-directory
-@vindex smiley-data-directory
-Where Smiley will look for smiley faces files.
-
-@item smiley-flesh-color
-@vindex smiley-flesh-color
-Skin color. The default is @samp{yellow}, which is really racist.
-
-@item smiley-features-color
-@vindex smiley-features-color
-Color of the features of the face. The default is @samp{black}.
-
-@item smiley-tongue-color
-@vindex smiley-tongue-color
-Color of the tongue. The default is @samp{red}.
-
-@item smiley-circle-color
-@vindex smiley-circle-color
-Color of the circle around the face. The default is @samp{black}.
-
-@item smiley-mouse-face
-@vindex smiley-mouse-face
-Face used for mouse highlighting over the smiley face.
-
-@end table
-
-
-@node Toolbar
-@subsection Toolbar
-
-@table @code
-
-@iftex
-@iflatex
-\margindex{}
-@end iflatex
-@end iftex
-
-@item gnus-use-toolbar
-@vindex gnus-use-toolbar
-If @code{nil}, don't display toolbars. If non-@code{nil}, it should be
-one of @code{default-toolbar}, @code{top-toolbar}, @code{bottom-toolbar},
-@code{right-toolbar}, or @code{left-toolbar}.
-
-@item gnus-group-toolbar
-@vindex gnus-group-toolbar
-The toolbar in the group buffer.
-
-@item gnus-summary-toolbar
-@vindex gnus-summary-toolbar
-The toolbar in the summary buffer.
-
-@item gnus-summary-mail-toolbar
-@vindex gnus-summary-mail-toolbar
-The toolbar in the summary buffer of mail groups.
-
-@end table
-
-
-@node XVarious
-@subsection Various XEmacs Variables
-
-@table @code
-@item gnus-xmas-glyph-directory
-@vindex gnus-xmas-glyph-directory
-This is where Gnus will look for pictures. Gnus will normally
-auto-detect this directory, but you may set it manually if you have an
-unusual directory structure.
-
-@item gnus-xmas-logo-color-alist
-@vindex gnus-xmas-logo-color-alist
-This is an alist where the key is a type symbol and the values are the
-foreground and background color of the splash page glyph.
-
-@item gnus-xmas-logo-color-style
-@vindex gnus-xmas-logo-color-style
-This is the key used to look up the color in the alist described above.
-Valid values include @code{flame}, @code{pine}, @code{moss},
-@code{irish}, @code{sky}, @code{tin}, @code{velvet}, @code{grape},
-@code{labia}, @code{berry}, @code{neutral}, and @code{september}.
-
-@item gnus-xmas-modeline-glyph
-@vindex gnus-xmas-modeline-glyph
-A glyph displayed in all Gnus mode lines. It is a tiny gnu head by
-default.
-
-@iftex
-@iflatex
-\margindex{}
-@end iflatex
-@end iftex
-
-@end table
-
-
-
-
-@node Fuzzy Matching
-@section Fuzzy Matching
-@cindex fuzzy matching
-
-Gnus provides @dfn{fuzzy matching} of @code{Subject} lines when doing
-things like scoring, thread gathering and thread comparison.
-
-As opposed to regular expression matching, fuzzy matching is very fuzzy.
-It's so fuzzy that there's not even a definition of what @dfn{fuzziness}
-means, and the implementation has changed over time.
-
-Basically, it tries to remove all noise from lines before comparing.
-@samp{Re: }, parenthetical remarks, white space, and so on, are filtered
-out of the strings before comparing the results. This often leads to
-adequate results---even when faced with strings generated by text
-manglers masquerading as newsreaders.
-
-
-@node Thwarting Email Spam
-@section Thwarting Email Spam
-@cindex email spam
-@cindex spam
-@cindex UCE
-@cindex unsolicited commercial email
-
-In these last days of the Usenet, commercial vultures are hanging about
-and grepping through news like crazy to find email addresses they can
-foist off their scams and products to. As a reaction to this, many
-people have started putting nonsense addresses into their @code{From}
-lines. I think this is counterproductive---it makes it difficult for
-people to send you legitimate mail in response to things you write, as
-well as making it difficult to see who wrote what. This rewriting may
-perhaps be a bigger menace than the unsolicited commercial email itself
-in the end.
-
-The biggest problem I have with email spam is that it comes in under
-false pretenses. I press @kbd{g} and Gnus merrily informs me that I
-have 10 new emails. I say ``Golly gee! Happy is me!'' and select the
-mail group, only to find two pyramid schemes, seven advertisements
-(``New! Miracle tonic for growing full, lustrous hair on your toes!'')
-and one mail asking me to repent and find some god.
-
-This is annoying.
-
-The way to deal with this is having Gnus split out all spam into a
-@samp{spam} mail group (@pxref{Splitting Mail}).
-
-First, pick one (1) valid mail address that you can be reached at, and
-put it in your @code{From} header of all your news articles. (I've
-chosen @samp{larsi@@trym.ifi.uio.no}, but for many addresses on the form
-@samp{larsi+usenet@@ifi.uio.no} will be a better choice. Ask your
-sysadm whether your sendmail installation accepts keywords in the local
-part of the mail address.)
-
-@lisp
-(setq message-default-news-headers
- "From: Lars Magne Ingebrigtsen <larsi@@trym.ifi.uio.no>\n")
-@end lisp
-
-Then put the following split rule in @code{nnmail-split-fancy}
-(@pxref{Fancy Mail Splitting}):
-
-@lisp
-(
- ...
- (to "larsi@@trym.ifi.uio.no"
- (| ("subject" "re:.*" "misc")
- ("references" ".*@@.*" "misc")
- "spam"))
- ...
-)
-@end lisp
-
-This says that all mail to this address is suspect, but if it has a
-@code{Subject} that starts with a @samp{Re:} or has a @code{References}
-header, it's probably ok. All the rest goes to the @samp{spam} group.
-(This idea probably comes from Tim Pierce.)
-
-In addition, many mail spammers talk directly to your @code{smtp} server
-and do not include your email address explicitly in the @code{To}
-header. Why they do this is unknown---perhaps it's to thwart this
-thwarting scheme? In any case, this is trivial to deal with---you just
-put anything not addressed to you in the @samp{spam} group by ending
-your fancy split rule in this way:
-
-@lisp
-(
- ...
- (to "larsi" "misc")
- "spam")
-@end lisp
-
-In my experience, this will sort virtually everything into the right
-group. You still have to check the @samp{spam} group from time to time to
-check for legitimate mail, though. If you feel like being a good net
-citizen, you can even send off complaints to the proper authorities on
-each unsolicited commercial email---at your leisure.
-
-If you are also a lazy net citizen, you will probably prefer complaining
-automatically with the @file{gnus-junk.el} package, available FOR FREE
-at @* @file{<URL:http://stud2.tuwien.ac.at/~e9426626/gnus-junk.html>}.
-Since most e-mail spam is sent automatically, this may reconcile the
-cosmic balance somewhat.
-
-This works for me. It allows people an easy way to contact me (they can
-just press @kbd{r} in the usual way), and I'm not bothered at all with
-spam. It's a win-win situation. Forging @code{From} headers to point
-to non-existent domains is yucky, in my opinion.
-
-
-@node Various Various
-@section Various Various
-@cindex mode lines
-@cindex highlights
-
-@table @code
-
-@item gnus-home-directory
-All Gnus path variables will be initialized from this variable, which
-defaults to @file{~/}.
-
-@item gnus-directory
-@vindex gnus-directory
-Most Gnus storage path variables will be initialized from this variable,
-which defaults to the @samp{SAVEDIR} environment variable, or
-@file{~/News/} if that variable isn't set.
-
-Note that Gnus is mostly loaded when the @file{.gnus.el} file is read.
-This means that other directory variables that are initialized from this
-variable won't be set properly if you set this variable in
-@file{.gnus.el}. Set this variable in @file{.emacs} instead.
-
-@item gnus-default-directory
-@vindex gnus-default-directory
-Not related to the above variable at all---this variable says what the
-default directory of all Gnus buffers should be. If you issue commands
-like @kbd{C-x C-f}, the prompt you'll get starts in the current buffer's
-default directory. If this variable is @code{nil} (which is the
-default), the default directory will be the default directory of the
-buffer you were in when you started Gnus.
-
-@item gnus-verbose
-@vindex gnus-verbose
-This variable is an integer between zero and ten. The higher the value,
-the more messages will be displayed. If this variable is zero, Gnus
-will never flash any messages, if it is seven (which is the default),
-most important messages will be shown, and if it is ten, Gnus won't ever
-shut up, but will flash so many messages it will make your head swim.
-
-@item gnus-verbose-backends
-@vindex gnus-verbose-backends
-This variable works the same way as @code{gnus-verbose}, but it applies
-to the Gnus backends instead of Gnus proper.
-
-@item nnheader-max-head-length
-@vindex nnheader-max-head-length
-When the backends read straight heads of articles, they all try to read
-as little as possible. This variable (default 4096) specifies
-the absolute max length the backends will try to read before giving up
-on finding a separator line between the head and the body. If this
-variable is @code{nil}, there is no upper read bound. If it is
-@code{t}, the backends won't try to read the articles piece by piece,
-but read the entire articles. This makes sense with some versions of
-@code{ange-ftp} or @code{efs}.
-
-@item nnheader-head-chop-length
-@vindex nnheader-head-chop-length
-This variable (default 2048) says how big a piece of each article to
-read when doing the operation described above.
-
-@item nnheader-file-name-translation-alist
-@vindex nnheader-file-name-translation-alist
-@cindex file names
-@cindex invalid characters in file names
-@cindex characters in file names
-This is an alist that says how to translate characters in file names.
-For instance, if @samp{:} is invalid as a file character in file names
-on your system (you OS/2 user you), you could say something like:
-
-@lisp
-(setq nnheader-file-name-translation-alist
- '((?: . ?_)))
-@end lisp
-
-In fact, this is the default value for this variable on OS/2 and MS
-Windows (phooey) systems.
-
-@item gnus-hidden-properties
-@vindex gnus-hidden-properties
-This is a list of properties to use to hide ``invisible'' text. It is
-@code{(invisible t intangible t)} by default on most systems, which
-makes invisible text invisible and intangible.
-
-@item gnus-parse-headers-hook
-@vindex gnus-parse-headers-hook
-A hook called before parsing headers. It can be used, for instance, to
-gather statistics on the headers fetched, or perhaps you'd like to prune
-some headers. I don't see why you'd want that, though.
-
-@item gnus-shell-command-separator
-@vindex gnus-shell-command-separator
-String used to separate two shell commands. The default is @samp{;}.
-
-
-@end table
-
-
-@node The End
-@chapter The End
-
-Well, that's the manual---you can get on with your life now. Keep in
-touch. Say hello to your cats from me.
-
-My @strong{ghod}---I just can't stand goodbyes. Sniffle.
-
-Ol' Charles Reznikoff said it pretty well, so I leave the floor to him:
-
-@quotation
-@strong{Te Deum}
-
-@sp 1
-Not because of victories @*
-I sing,@*
-having none,@*
-but for the common sunshine,@*
-the breeze,@*
-the largess of the spring.
-
-@sp 1
-Not for victory@*
-but for the day's work done@*
-as well as I was able;@*
-not for a seat upon the dais@*
-but at the common table.@*
-@end quotation
-
-
-@node Appendices
-@chapter Appendices
-
-@menu
-* History:: How Gnus got where it is today.
-* Terminology:: We use really difficult, like, words here.
-* Customization:: Tailoring Gnus to your needs.
-* Troubleshooting:: What you might try if things do not work.
-* Gnus Reference Guide:: Rilly, rilly technical stuff.
-* Emacs for Heathens:: A short introduction to Emacsian terms.
-* Frequently Asked Questions:: A question-and-answer session.
-@end menu
-
-
-@node History
-@section History
-
-@cindex history
-@sc{gnus} was written by Masanobu @sc{Umeda}. When autumn crept up in
-'94, Lars Magne Ingebrigtsen grew bored and decided to rewrite Gnus.
-
-If you want to investigate the person responsible for this outrage, you
-can point your (feh!) web browser to
-@file{http://www.stud.ifi.uio.no/~larsi/}. This is also the primary
-distribution point for the new and spiffy versions of Gnus, and is known
-as The Site That Destroys Newsrcs And Drives People Mad.
-
-During the first extended alpha period of development, the new Gnus was
-called ``(ding) Gnus''. @dfn{(ding)} is, of course, short for
-@dfn{ding is not Gnus}, which is a total and utter lie, but who cares?
-(Besides, the ``Gnus'' in this abbreviation should probably be
-pronounced ``news'' as @sc{Umeda} intended, which makes it a more
-appropriate name, don't you think?)
-
-In any case, after spending all that energy on coming up with a new and
-spunky name, we decided that the name was @emph{too} spunky, so we
-renamed it back again to ``Gnus''. But in mixed case. ``Gnus'' vs.
-``@sc{gnus}''. New vs. old.
-
-The first ``proper'' release of Gnus 5 was done in November 1995 when it
-was included in the Emacs 19.30 distribution (132 (ding) Gnus releases
-plus 15 Gnus 5.0 releases).
-
-In May 1996 the next Gnus generation (aka. ``September Gnus'' (after 99
-releases)) was released under the name ``Gnus 5.2'' (40 releases).
-
-On July 28th 1996 work on Red Gnus was begun, and it was released on
-January 25th 1997 (after 84 releases) as ``Gnus 5.4'' (67 releases).
-
-On September 13th 1997, Quassia Gnus was started and lasted 37
-releases. If was released as ``Gnus 5.6 on March 8th 1998.
-
-If you happen upon a version of Gnus that has a prefixed name --
-``(ding) Gnus'', ``September Gnus'', ``Red Gnus'', ``Quassia Gnus'' --
-don't panic. Don't let it know that you're frightened. Back away.
-Slowly. Whatever you do, don't run. Walk away, calmly, until you're
-out of its reach. Find a proper released version of Gnus and snuggle up
-to that instead.
-
-@menu
-* Why?:: What's the point of Gnus?
-* Compatibility:: Just how compatible is Gnus with @sc{gnus}?
-* Conformity:: Gnus tries to conform to all standards.
-* Emacsen:: Gnus can be run on a few modern Emacsen.
-* Contributors:: Oodles of people.
-* New Features:: Pointers to some of the new stuff in Gnus.
-* Newest Features:: Features so new that they haven't been written yet.
-@end menu
-
-
-@node Why?
-@subsection Why?
-
-What's the point of Gnus?
-
-I want to provide a ``rad'', ``happening'', ``way cool'' and ``hep''
-newsreader, that lets you do anything you can think of. That was my
-original motivation, but while working on Gnus, it has become clear to
-me that this generation of newsreaders really belong in the stone age.
-Newsreaders haven't developed much since the infancy of the net. If the
-volume continues to rise with the current rate of increase, all current
-newsreaders will be pretty much useless. How do you deal with
-newsgroups that have thousands of new articles each day? How do you
-keep track of millions of people who post?
-
-Gnus offers no real solutions to these questions, but I would very much
-like to see Gnus being used as a testing ground for new methods of
-reading and fetching news. Expanding on @sc{Umeda}-san's wise decision
-to separate the newsreader from the backends, Gnus now offers a simple
-interface for anybody who wants to write new backends for fetching mail
-and news from different sources. I have added hooks for customizations
-everywhere I could imagine it being useful. By doing so, I'm inviting
-every one of you to explore and invent.
-
-May Gnus never be complete. @kbd{C-u 100 M-x all-hail-emacs} and
-@kbd{C-u 100 M-x all-hail-xemacs}.
-
-
-@node Compatibility
-@subsection Compatibility
-
-@cindex compatibility
-Gnus was designed to be fully compatible with @sc{gnus}. Almost all key
-bindings have been kept. More key bindings have been added, of course,
-but only in one or two obscure cases have old bindings been changed.
-
-Our motto is:
-@quotation
-@cartouche
-@center In a cloud bones of steel.
-@end cartouche
-@end quotation
-
-All commands have kept their names. Some internal functions have changed
-their names.
-
-The @code{gnus-uu} package has changed drastically. @xref{Decoding
-Articles}.
-
-One major compatibility question is the presence of several summary
-buffers. All variables relevant while reading a group are
-buffer-local to the summary buffer they belong in. Although many
-important variables have their values copied into their global
-counterparts whenever a command is executed in the summary buffer, this
-change might lead to incorrect values being used unless you are careful.
-
-All code that relies on knowledge of @sc{gnus} internals will probably
-fail. To take two examples: Sorting @code{gnus-newsrc-alist} (or
-changing it in any way, as a matter of fact) is strictly verboten. Gnus
-maintains a hash table that points to the entries in this alist (which
-speeds up many functions), and changing the alist directly will lead to
-peculiar results.
-
-@cindex hilit19
-@cindex highlighting
-Old hilit19 code does not work at all. In fact, you should probably
-remove all hilit code from all Gnus hooks
-(@code{gnus-group-prepare-hook} and @code{gnus-summary-prepare-hook}).
-Gnus provides various integrated functions for highlighting. These are
-faster and more accurate. To make life easier for everybody, Gnus will
-by default remove all hilit calls from all hilit hooks. Uncleanliness!
-Away!
-
-Packages like @code{expire-kill} will no longer work. As a matter of
-fact, you should probably remove all old @sc{gnus} packages (and other
-code) when you start using Gnus. More likely than not, Gnus already
-does what you have written code to make @sc{gnus} do. (Snicker.)
-
-Even though old methods of doing things are still supported, only the
-new methods are documented in this manual. If you detect a new method of
-doing something while reading this manual, that does not mean you have
-to stop doing it the old way.
-
-Gnus understands all @sc{gnus} startup files.
-
-@kindex M-x gnus-bug
-@findex gnus-bug
-@cindex reporting bugs
-@cindex bugs
-Overall, a casual user who hasn't written much code that depends on
-@sc{gnus} internals should suffer no problems. If problems occur,
-please let me know by issuing that magic command @kbd{M-x gnus-bug}.
-
-@vindex gnus-bug-create-help-buffer
-If you are in the habit of sending bug reports @emph{very} often, you
-may find the helpful help buffer annoying after a while. If so, set
-@code{gnus-bug-create-help-buffer} to @code{nil} to avoid having it pop
-up at you.
-
-
-@node Conformity
-@subsection Conformity
-
-No rebels without a clue here, ma'am. We conform to all standards known
-to (wo)man. Except for those standards and/or conventions we disagree
-with, of course.
-
-@table @strong
-
-@item RFC 822
-@cindex RFC 822
-There are no known breaches of this standard.
-
-@item RFC 1036
-@cindex RFC 1036
-There are no known breaches of this standard, either.
-
-@item Son-of-RFC 1036
-@cindex Son-of-RFC 1036
-We do have some breaches to this one.
-
-@table @emph
-
-@item MIME
-Gnus does not yet fully handle MIME, and this standard-to-be seems to
-think that MIME is the bees' knees, so we have major breakage here.
-
-@item X-Newsreader
-This is considered to be a ``vanity header'', while I consider it to be
-consumer information. After seeing so many badly formatted articles
-coming from @code{tin} and @code{Netscape} I know not to use either of
-those for posting articles. I would not have known that if it wasn't
-for the @code{X-Newsreader} header.
-@end table
-
-@item USEFOR
-@cindex USEFOR
-USEFOR is an IETF working group writing a successor to RFC 1036, based
-on Son-of-RFC 1036. They have produced a number of drafts proposing
-various changes to the format of news articles. The Gnus towers will
-look into implementing the changes when the draft is accepted as an RFC.
-
-@end table
-
-If you ever notice Gnus acting non-compliant with regards to the texts
-mentioned above, don't hesitate to drop a note to Gnus Towers and let us
-know.
-
-
-@node Emacsen
-@subsection Emacsen
-@cindex Emacsen
-@cindex XEmacs
-@cindex Mule
-@cindex Emacs
-
-Gnus should work on :
-
-@itemize @bullet
-
-@item
-Emacs 20.2 and up.
-
-@item
-XEmacs 20.4 and up.
-
-@end itemize
-
-Gnus will absolutely not work on any Emacsen older than that. Not
-reliably, at least.
-
-There are some vague differences between Gnus on the various
-platforms---XEmacs features more graphics (a logo and a toolbar)---but
-other than that, things should look pretty much the same under all
-Emacsen.
-
-
-@node Contributors
-@subsection Contributors
-@cindex contributors
-
-The new Gnus version couldn't have been done without the help of all the
-people on the (ding) mailing list. Every day for over a year I have
-gotten billions of nice bug reports from them, filling me with joy,
-every single one of them. Smooches. The people on the list have been
-tried beyond endurance, what with my ``oh, that's a neat idea <type
-type>, yup, I'll release it right away <ship off> no wait, that doesn't
-work at all <type type>, yup, I'll ship that one off right away <ship
-off> no, wait, that absolutely does not work'' policy for releases.
-Micro$oft---bah. Amateurs. I'm @emph{much} worse. (Or is that
-``worser''? ``much worser''? ``worsest''?)
-
-I would like to take this opportunity to thank the Academy for... oops,
-wrong show.
-
-@itemize @bullet
-
-@item
-Masanobu @sc{Umeda}---the writer of the original @sc{gnus}.
-
-@item
-Per Abrahamsen---custom, scoring, highlighting and @sc{soup} code (as
-well as numerous other things).
-
-@item
-Luis Fernandes---design and graphics.
-
-@item
-Erik Naggum---help, ideas, support, code and stuff.
-
-@item
-Shenghuo Zhu---uudecode.el, mm-uu.el, rfc1843.el and many other things
-connected with @sc{mime} and other types of en/decoding.
-
-@item
-Wes Hardaker---@file{gnus-picon.el} and the manual section on
-@dfn{picons} (@pxref{Picons}).
-
-@item
-Kim-Minh Kaplan---further work on the picon code.
-
-@item
-Brad Miller---@file{gnus-gl.el} and the GroupLens manual section
-(@pxref{GroupLens}).
-
-@item
-Sudish Joseph---innumerable bug fixes.
-
-@item
-Ilja Weis---@file{gnus-topic.el}.
-
-@item
-Steven L. Baur---lots and lots and lots of bugs detections and fixes.
-
-@item
-Vladimir Alexiev---the refcard and reference booklets.
-
-@item
-Felix Lee & Jamie Zawinski---I stole some pieces from the XGnus
-distribution by Felix Lee and JWZ.
-
-@item
-Scott Byer---@file{nnfolder.el} enhancements & rewrite.
-
-@item
-Peter Mutsaers---orphan article scoring code.
-
-@item
-Ken Raeburn---POP mail support.
-
-@item
-Hallvard B Furuseth---various bits and pieces, especially dealing with
-.newsrc files.
-
-@item
-Brian Edmonds---@file{gnus-bbdb.el}.
-
-@item
-David Moore---rewrite of @file{nnvirtual.el} and many other things.
-
-@item
-Kevin Davidson---came up with the name @dfn{ding}, so blame him.
-
-@item
-François Pinard---many, many interesting and thorough bug reports, as
-well as autoconf support.
-
-@end itemize
-
-This manual was proof-read by Adrian Aichner, with Ricardo Nassif, Mark
-Borges, and Jost Krieger proof-reading parts of the manual.
-
-The following people have contributed many patches and suggestions:
-
-Christopher Davis,
-Andrew Eskilsson,
-Kai Grossjohann,
-David Kågedal,
-Richard Pieri,
-Fabrice Popineau,
-Daniel Quinlan,
-Jason L. Tibbitts, III,
-and
-Jack Vinson.
-
-Also thanks to the following for patches and stuff:
-
-Jari Aalto,
-Adrian Aichner,
-Vladimir Alexiev,
-Russ Allbery,
-Peter Arius,
-Matt Armstrong,
-Marc Auslander,
-Frank Bennett,
-Robert Bihlmeyer,
-Chris Bone,
-Mark Borges,
-Mark Boyns,
-Lance A. Brown,
-Kees de Bruin,
-Martin Buchholz,
-Joe Buehler,
-Kevin Buhr,
-Alastair Burt,
-Joao Cachopo,
-Zlatko Calusic,
-Massimo Campostrini,
-Castor,
-David Charlap,
-Dan Christensen,
-Kevin Christian,
-Michael R. Cook,
-Glenn Coombs,
-Frank D. Cringle,
-Geoffrey T. Dairiki,
-Andre Deparade,
-Ulrik Dickow,
-Dave Disser,
-Rui-Tao Dong, @c ?
-Joev Dubach,
-Michael Welsh Duggan,
-Dave Edmondson,
-Paul Eggert,
-Enami Tsugutomo, @c Enami
-Michael Ernst,
-Luc Van Eycken,
-Sam Falkner,
-Nelson Jose dos Santos Ferreira,
-Sigbjorn Finne,
-Paul Fisher,
-Decklin Foster,
-Gary D. Foster,
-Paul Franklin,
-Guy Geens,
-Arne Georg Gleditsch,
-David S. Goldberg,
-Michelangelo Grigni,
-D. Hall,
-Magnus Hammerin,
-Kenichi Handa, @c Handa
-Raja R. Harinath,
-Yoshiki Hayashi, @c ?
-P. E. Jareth Hein,
-Hisashige Kenji, @c Hisashige
-Marc Horowitz,
-Gunnar Horrigmo,
-Richard Hoskins,
-Brad Howes,
-François Felix Ingrand,
-Ishikawa Ichiro, @c Ishikawa
-Lee Iverson,
-Iwamuro Motonori, @c Iwamuro
-Rajappa Iyer,
-Andreas Jaeger,
-Randell Jesup,
-Fred Johansen,
-Gareth Jones,
-Simon Josefsson,
-Greg Klanderman,
-Karl Kleinpaste,
-Peter Skov Knudsen,
-Shuhei Kobayashi, @c Kobayashi
-Koseki Yoshinori, @c Koseki
-Thor Kristoffersen,
-Jens Lautenbacher,
-Martin Larose,
-Seokchan Lee, @c Lee
-Carsten Leonhardt,
-James LewisMoss,
-Christian Limpach,
-Markus Linnala,
-Dave Love,
-Mike McEwan,
-Tonny Madsen,
-Shlomo Mahlab,
-Nat Makarevitch,
-Istvan Marko,
-David Martin,
-Jason R. Mastaler,
-Gordon Matzigkeit,
-Timo Metzemakers,
-Richard Mlynarik,
-Lantz Moore,
-Morioka Tomohiko, @c Morioka
-Erik Toubro Nielsen,
-Hrvoje Niksic,
-Andy Norman,
-Fred Oberhauser,
-C. R. Oldham,
-Alexandre Oliva,
-Ken Olstad,
-Masaharu Onishi, @c Onishi
-Hideki Ono, @c Ono
-William Perry,
-Stephen Peters,
-Jens-Ulrik Holger Petersen,
-Ulrich Pfeifer,
-Matt Pharr,
-John McClary Prevost,
-Bill Pringlemeir,
-Mike Pullen,
-Jim Radford,
-Colin Rafferty,
-Lasse Rasinen,
-Lars Balker Rasmussen,
-Joe Reiss,
-Renaud Rioboo,
-Roland B. Roberts,
-Bart Robinson,
-Christian von Roques,
-Jason Rumney,
-Wolfgang Rupprecht,
-Jay Sachs,
-Dewey M. Sasser,
-Conrad Sauerwald,
-Loren Schall,
-Dan Schmidt,
-Ralph Schleicher,
-Philippe Schnoebelen,
-Andreas Schwab,
-Randal L. Schwartz,
-Justin Sheehy,
-Danny Siu,
-Matt Simmons,
-Paul D. Smith,
-Jeff Sparkes,
-Toby Speight,
-Michael Sperber,
-Darren Stalder,
-Richard Stallman,
-Greg Stark,
-Sam Steingold,
-Paul Stodghill,
-Kurt Swanson,
-Samuel Tardieu,
-Teddy,
-Chuck Thompson,
-Philippe Troin,
-James Troup,
-Trung Tran-Duc,
-Aaron M. Ucko,
-Aki Vehtari,
-Didier Verna,
-Jan Vroonhof,
-Stefan Waldherr,
-Pete Ware,
-Barry A. Warsaw,
-Christoph Wedler,
-Joe Wells
-and
-Katsumi Yamaoka, @c Yamaoka.
-
-For a full overview of what each person has done, the ChangeLogs
-included in the Gnus alpha distributions should give ample reading
-(550kB and counting).
-
-Apologies to everybody that I've forgotten, of which there are many, I'm
-sure.
-
-Gee, that's quite a list of people. I guess that must mean that there
-actually are people who are using Gnus. Who'd'a thunk it!
-
-
-@node New Features
-@subsection New Features
-@cindex new features
-
-@menu
-* ding Gnus:: New things in Gnus 5.0/5.1, the first new Gnus.
-* September Gnus:: The Thing Formally Known As Gnus 5.3/5.3.
-* Red Gnus:: Third time best---Gnus 5.4/5.5.
-* Quassia Gnus:: Two times two is four, or Gnus 5.6/5.7.
-@end menu
-
-These lists are, of course, just @emph{short} overviews of the
-@emph{most} important new features. No, really. There are tons more.
-Yes, we have feeping creaturism in full effect.
-
-
-@node ding Gnus
-@subsubsection (ding) Gnus
-
-New features in Gnus 5.0/5.1:
-
-@itemize @bullet
-
-@item
-The look of all buffers can be changed by setting format-like variables
-(@pxref{Group Buffer Format} and @pxref{Summary Buffer Format}).
-
-@item
-Local spool and several @sc{nntp} servers can be used at once
-(@pxref{Select Methods}).
-
-@item
-You can combine groups into virtual groups (@pxref{Virtual Groups}).
-
-@item
-You can read a number of different mail formats (@pxref{Getting Mail}).
-All the mail backends implement a convenient mail expiry scheme
-(@pxref{Expiring Mail}).
-
-@item
-Gnus can use various strategies for gathering threads that have lost
-their roots (thereby gathering loose sub-threads into one thread) or it
-can go back and retrieve enough headers to build a complete thread
-(@pxref{Customizing Threading}).
-
-@item
-Killed groups can be displayed in the group buffer, and you can read
-them as well (@pxref{Listing Groups}).
-
-@item
-Gnus can do partial group updates---you do not have to retrieve the
-entire active file just to check for new articles in a few groups
-(@pxref{The Active File}).
-
-@item
-Gnus implements a sliding scale of subscribedness to groups
-(@pxref{Group Levels}).
-
-@item
-You can score articles according to any number of criteria
-(@pxref{Scoring}). You can even get Gnus to find out how to score
-articles for you (@pxref{Adaptive Scoring}).
-
-@item
-Gnus maintains a dribble buffer that is auto-saved the normal Emacs
-manner, so it should be difficult to lose much data on what you have
-read if your machine should go down (@pxref{Auto Save}).
-
-@item
-Gnus now has its own startup file (@file{.gnus}) to avoid cluttering up
-the @file{.emacs} file.
-
-@item
-You can set the process mark on both groups and articles and perform
-operations on all the marked items (@pxref{Process/Prefix}).
-
-@item
-You can grep through a subset of groups and create a group from the
-results (@pxref{Kibozed Groups}).
-
-@item
-You can list subsets of groups according to, well, anything
-(@pxref{Listing Groups}).
-
-@item
-You can browse foreign servers and subscribe to groups from those
-servers (@pxref{Browse Foreign Server}).
-
-@item
-Gnus can fetch articles, asynchronously, on a second connection to the
-server (@pxref{Asynchronous Fetching}).
-
-@item
-You can cache articles locally (@pxref{Article Caching}).
-
-@item
-The uudecode functions have been expanded and generalized
-(@pxref{Decoding Articles}).
-
-@item
-You can still post uuencoded articles, which was a little-known feature
-of @sc{gnus}' past (@pxref{Uuencoding and Posting}).
-
-@item
-Fetching parents (and other articles) now actually works without
-glitches (@pxref{Finding the Parent}).
-
-@item
-Gnus can fetch FAQs and group descriptions (@pxref{Group Information}).
-
-@item
-Digests (and other files) can be used as the basis for groups
-(@pxref{Document Groups}).
-
-@item
-Articles can be highlighted and customized (@pxref{Customizing
-Articles}).
-
-@item
-URLs and other external references can be buttonized (@pxref{Article
-Buttons}).
-
-@item
-You can do lots of strange stuff with the Gnus window & frame
-configuration (@pxref{Windows Configuration}).
-
-@item
-You can click on buttons instead of using the keyboard
-(@pxref{Buttons}).
-
-@end itemize
-
-
-@node September Gnus
-@subsubsection September Gnus
-
-@iftex
-@iflatex
-\gnusfig{-28cm}{0cm}{\epsfig{figure=tmp/september.ps,height=20cm}}
-@end iflatex
-@end iftex
-
-New features in Gnus 5.2/5.3:
-
-@itemize @bullet
-
-@item
-A new message composition mode is used. All old customization variables
-for @code{mail-mode}, @code{rnews-reply-mode} and @code{gnus-msg} are
-now obsolete.
-
-@item
-Gnus is now able to generate @dfn{sparse} threads---threads where
-missing articles are represented by empty nodes (@pxref{Customizing
-Threading}).
-
-@lisp
-(setq gnus-build-sparse-threads 'some)
-@end lisp
-
-@item
-Outgoing articles are stored on a special archive server
-(@pxref{Archived Messages}).
-
-@item
-Partial thread regeneration now happens when articles are
-referred.
-
-@item
-Gnus can make use of GroupLens predictions (@pxref{GroupLens}).
-
-@item
-Picons (personal icons) can be displayed under XEmacs (@pxref{Picons}).
-
-@item
-A @code{trn}-like tree buffer can be displayed (@pxref{Tree Display}).
-
-@lisp
-(setq gnus-use-trees t)
-@end lisp
-
-@item
-An @code{nn}-like pick-and-read minor mode is available for the summary
-buffers (@pxref{Pick and Read}).
-
-@lisp
-(add-hook 'gnus-summary-mode-hook 'gnus-pick-mode)
-@end lisp
-
-@item
-In binary groups you can use a special binary minor mode (@pxref{Binary
-Groups}).
-
-@item
-Groups can be grouped in a folding topic hierarchy (@pxref{Group
-Topics}).
-
-@lisp
-(add-hook 'gnus-group-mode-hook 'gnus-topic-mode)
-@end lisp
-
-@item
-Gnus can re-send and bounce mail (@pxref{Summary Mail Commands}).
-
-@item
-Groups can now have a score, and bubbling based on entry frequency
-is possible (@pxref{Group Score}).
-
-@lisp
-(add-hook 'gnus-summary-exit-hook 'gnus-summary-bubble-group)
-@end lisp
-
-@item
-Groups can be process-marked, and commands can be performed on
-groups of groups (@pxref{Marking Groups}).
-
-@item
-Caching is possible in virtual groups.
-
-@item
-@code{nndoc} now understands all kinds of digests, mail boxes, rnews
-news batches, ClariNet briefs collections, and just about everything
-else (@pxref{Document Groups}).
-
-@item
-Gnus has a new backend (@code{nnsoup}) to create/read SOUP packets
-(@pxref{SOUP}).
-
-@item
-The Gnus cache is much faster.
-
-@item
-Groups can be sorted according to many criteria (@pxref{Sorting
-Groups}).
-
-@item
-New group parameters have been introduced to set list-addresses and
-expiry times (@pxref{Group Parameters}).
-
-@item
-All formatting specs allow specifying faces to be used
-(@pxref{Formatting Fonts}).
-
-@item
-There are several more commands for setting/removing/acting on process
-marked articles on the @kbd{M P} submap (@pxref{Setting Process Marks}).
-
-@item
-The summary buffer can be limited to show parts of the available
-articles based on a wide range of criteria. These commands have been
-bound to keys on the @kbd{/} submap (@pxref{Limiting}).
-
-@item
-Articles can be made persistent with the @kbd{*} command
-(@pxref{Persistent Articles}).
-
-@item
-All functions for hiding article elements are now toggles.
-
-@item
-Article headers can be buttonized (@pxref{Article Washing}).
-
-@lisp
-(add-hook 'gnus-article-display-hook
- 'gnus-article-add-buttons-to-head)
-@end lisp
-
-@item
-All mail backends support fetching articles by @code{Message-ID}.
-
-@item
-Duplicate mail can now be treated properly (@pxref{Duplicates}).
-
-@item
-All summary mode commands are available directly from the article
-buffer (@pxref{Article Keymap}).
-
-@item
-Frames can be part of @code{gnus-buffer-configuration} (@pxref{Windows
-Configuration}).
-
-@item
-Mail can be re-scanned by a daemonic process (@pxref{Daemons}).
-@iftex
-@iflatex
-\marginpar[\mbox{}\hfill\epsfig{figure=tmp/fseptember.ps,height=5cm}]{\epsfig{figure=tmp/fseptember.ps,height=5cm}}
-@end iflatex
-@end iftex
-
-@item
-Gnus can make use of NoCeM files to weed out spam (@pxref{NoCeM}).
-
-@lisp
-(setq gnus-use-nocem t)
-@end lisp
-
-@item
-Groups can be made permanently visible (@pxref{Listing Groups}).
-
-@lisp
-(setq gnus-permanently-visible-groups "^nnml:")
-@end lisp
-
-@item
-Many new hooks have been introduced to make customizing easier.
-
-@item
-Gnus respects the @code{Mail-Copies-To} header.
-
-@item
-Threads can be gathered by looking at the @code{References} header
-(@pxref{Customizing Threading}).
-
-@lisp
-(setq gnus-summary-thread-gathering-function
- 'gnus-gather-threads-by-references)
-@end lisp
-
-@item
-Read articles can be stored in a special backlog buffer to avoid
-refetching (@pxref{Article Backlog}).
-
-@lisp
-(setq gnus-keep-backlog 50)
-@end lisp
-
-@item
-A clean copy of the current article is always stored in a separate
-buffer to allow easier treatment.
-
-@item
-Gnus can suggest where to save articles (@pxref{Saving Articles}).
-
-@item
-Gnus doesn't have to do as much prompting when saving (@pxref{Saving
-Articles}).
-
-@lisp
-(setq gnus-prompt-before-saving t)
-@end lisp
-
-@item
-@code{gnus-uu} can view decoded files asynchronously while fetching
-articles (@pxref{Other Decode Variables}).
-
-@lisp
-(setq gnus-uu-grabbed-file-functions 'gnus-uu-grab-view)
-@end lisp
-
-@item
-Filling in the article buffer now works properly on cited text
-(@pxref{Article Washing}).
-
-@item
-Hiding cited text adds buttons to toggle hiding, and how much
-cited text to hide is now customizable (@pxref{Article Hiding}).
-
-@lisp
-(setq gnus-cited-lines-visible 2)
-@end lisp
-
-@item
-Boring headers can be hidden (@pxref{Article Hiding}).
-
-@lisp
-(add-hook 'gnus-article-display-hook
- 'gnus-article-hide-boring-headers t)
-@end lisp
-
-@item
-Default scoring values can now be set from the menu bar.
-
-@item
-Further syntax checking of outgoing articles have been added.
-
-@end itemize
-
-
-@node Red Gnus
-@subsubsection Red Gnus
-
-New features in Gnus 5.4/5.5:
-
-@iftex
-@iflatex
-\gnusfig{-5.5cm}{-4cm}{\epsfig{figure=tmp/red.ps,height=20cm}}
-@end iflatex
-@end iftex
-
-@itemize @bullet
-
-@item
-@file{nntp.el} has been totally rewritten in an asynchronous fashion.
-
-@item
-Article prefetching functionality has been moved up into
-Gnus (@pxref{Asynchronous Fetching}).
-
-@item
-Scoring can now be performed with logical operators like @code{and},
-@code{or}, @code{not}, and parent redirection (@pxref{Advanced
-Scoring}).
-
-@item
-Article washing status can be displayed in the
-article mode line (@pxref{Misc Article}).
-
-@item
-@file{gnus.el} has been split into many smaller files.
-
-@item
-Suppression of duplicate articles based on Message-ID can be done
-(@pxref{Duplicate Suppression}).
-
-@lisp
-(setq gnus-suppress-duplicates t)
-@end lisp
-
-@item
-New variables for specifying what score and adapt files are to be
-considered home score and adapt files (@pxref{Home Score File}) have
-been added.
-
-@item
-@code{nndoc} was rewritten to be easily extendable (@pxref{Document
-Server Internals}).
-
-@item
-Groups can inherit group parameters from parent topics (@pxref{Topic
-Parameters}).
-
-@item
-Article editing has been revamped and is now actually usable.
-
-@item
-Signatures can be recognized in more intelligent fashions
-(@pxref{Article Signature}).
-
-@item
-Summary pick mode has been made to look more @code{nn}-like. Line
-numbers are displayed and the @kbd{.} command can be used to pick
-articles (@code{Pick and Read}).
-
-@item
-Commands for moving the @file{.newsrc.eld} from one server to
-another have been added (@pxref{Changing Servers}).
-
-@item
-There's a way now to specify that ``uninteresting'' fields be suppressed
-when generating lines in buffers (@pxref{Advanced Formatting}).
-
-@item
-Several commands in the group buffer can be undone with @kbd{M-C-_}
-(@pxref{Undo}).
-
-@item
-Scoring can be done on words using the new score type @code{w}
-(@pxref{Score File Format}).
-
-@item
-Adaptive scoring can be done on a Subject word-by-word basis
-(@pxref{Adaptive Scoring}).
-
-@lisp
-(setq gnus-use-adaptive-scoring '(word))
-@end lisp
-
-@item
-Scores can be decayed (@pxref{Score Decays}).
-
-@lisp
-(setq gnus-decay-scores t)
-@end lisp
-
-@item
-Scoring can be performed using a regexp on the Date header. The Date is
-normalized to compact ISO 8601 format first (@pxref{Score File Format}).
-
-@item
-A new command has been added to remove all data on articles from
-the native server (@pxref{Changing Servers}).
-
-@item
-A new command for reading collections of documents
-(@code{nndoc} with @code{nnvirtual} on top) has been added---@kbd{M-C-d}
-(@pxref{Really Various Summary Commands}).
-
-@item
-Process mark sets can be pushed and popped (@pxref{Setting Process
-Marks}).
-
-@item
-A new mail-to-news backend makes it possible to post even when the NNTP
-server doesn't allow posting (@pxref{Mail-To-News Gateways}).
-
-@item
-A new backend for reading searches from Web search engines
-(@dfn{DejaNews}, @dfn{Alta Vista}, @dfn{InReference}) has been added
-(@pxref{Web Searches}).
-
-@item
-Groups inside topics can now be sorted using the standard sorting
-functions, and each topic can be sorted independently (@pxref{Topic
-Sorting}).
-
-@item
-Subsets of the groups can be sorted independently (@code{Sorting
-Groups}).
-
-@item
-Cached articles can be pulled into the groups (@pxref{Summary Generation
-Commands}).
-@iftex
-@iflatex
-\marginpar[\mbox{}\hfill\epsfig{figure=tmp/fred.ps,width=3cm}]{\epsfig{figure=tmp/fred.ps,width=3cm}}
-@end iflatex
-@end iftex
-
-@item
-Score files are now applied in a more reliable order (@pxref{Score
-Variables}).
-
-@item
-Reports on where mail messages end up can be generated (@pxref{Splitting
-Mail}).
-
-@item
-More hooks and functions have been added to remove junk from incoming
-mail before saving the mail (@pxref{Washing Mail}).
-
-@item
-Emphasized text can be properly fontisized:
-
-@lisp
-(add-hook 'gnus-article-display-hook
- 'gnus-article-emphasize)
-@end lisp
-
-@end itemize
-
-
-@node Quassia Gnus
-@subsubsection Quassia Gnus
-
-New features in Gnus 5.6:
-
-@itemize @bullet
-
-@item
-New functionality for using Gnus as an offline newsreader has been
-added. A plethora of new commands and modes have been added. See
-@pxref{Gnus Unplugged} for the full story.
-
-@item
- The @code{nndraft} backend has returned, but works differently than
-before. All Message buffers are now also articles in the @code{nndraft}
-group, which is created automatically.
-
-@item
-@code{gnus-alter-header-function} can now be used to alter header
-values.
-
-@item
- @code{gnus-summary-goto-article} now accept Message-ID's.
-
-@item
- A new Message command for deleting text in the body of a message
-outside the region: @kbd{C-c C-v}.
-
-@item
- You can now post to component group in @code{nnvirtual} groups with
-@kbd{C-u C-c C-c}.
-
-@item
- @code{nntp-rlogin-program}---new variable to ease customization.
-
-@item
- @code{C-u C-c C-c} in @code{gnus-article-edit-mode} will now inhibit
-re-highlighting of the article buffer.
-
-@item
- New element in @code{gnus-boring-article-headers}---@code{long-to}.
-
-@item
- @kbd{M-i} symbolic prefix command. See the section "Symbolic
-Prefixes" in the Gnus manual for details.
-
-@item
- @kbd{L} and @kbd{I} in the summary buffer now take the symbolic prefix
-@kbd{a} to add the score rule to the "all.SCORE" file.
-
-@item
- @code{gnus-simplify-subject-functions} variable to allow greater
-control over simplification.
-
-@item
- @kbd{A T}---new command for fetching the current thread.
-
-@item
- @kbd{/ T}---new command for including the current thread in the
-limit.
-
-@item
- @kbd{M-RET} is a new Message command for breaking cited text.
-
-@item
- @samp{\\1}-expressions are now valid in @code{nnmail-split-methods}.
-
-@item
- The @code{custom-face-lookup} function has been removed.
-If you used this function in your initialization files, you must
-rewrite them to use @code{face-spec-set} instead.
-
-@item
- Canceling now uses the current select method. Symbolic prefix
-@kbd{a} forces normal posting method.
-
-@item
- New command to translate M******** sm*rtq**t*s into proper
-text---@kbd{W d}.
-
-@item
- For easier debugging of @code{nntp}, you can set
-@code{nntp-record-commands} to a non-@code{nil} value.
-
-@item
- @code{nntp} now uses @file{~/.authinfo}, a @file{.netrc}-like file, for
-controlling where and how to send @sc{authinfo} to @sc{nntp} servers.
-
-@item
- A command for editing group parameters from the summary buffer
-has been added.
-
-@item
- A history of where mails have been split is available.
-
-@item
- A new article date command has been added---@code{article-date-iso8601}.
-
-@item
- Subjects can be simplified when threading by setting
-@code{gnus-score-thread-simplify}.
-
-@item
- A new function for citing in Message has been
-added---@code{message-cite-original-without-signature}.
-
-@item
- @code{article-strip-all-blank-lines}---new article command.
-
-@item
- A new Message command to kill to the end of the article has
-been added.
-
-@item
- A minimum adaptive score can be specified by using the
-@code{gnus-adaptive-word-minimum} variable.
-
-@item
- The "lapsed date" article header can be kept continually
-updated by the @code{gnus-start-date-timer} command.
-
-@item
- Web listserv archives can be read with the @code{nnlistserv} backend.
-
-@item
- Old dejanews archives can now be read by @code{nnweb}.
-
-@end itemize
-
-
-@node Newest Features
-@subsection Newest Features
-@cindex todo
-
-Also known as the @dfn{todo list}. Sure to be implemented before the
-next millennium.
-
-Be afraid. Be very afraid.
-
-(That a feature appears in this list doesn't necessarily mean that I've
-decided to actually implement it. It just means that I think it sounds
-interesting.)
-
-(Yes, this is the actual, up-to-the-second todo list.)
-
-@itemize @bullet
-
-@item
-Native @sc{mime} support is something that should be done.
-
-@item
-Really do unbinhexing.
-
-@item
- I would like the zombie-page to contain an URL to the source of the
-latest version of gnus or some explanation on where to find it.
-
-@item
- A way to continue editing the latest Message composition.
-
-@item
- http://www.sonicnet.com/feature/ari3/
-
-@item
- facep is not declared.
-
-@item
- Include a section in the manual on why the number of articles
-isn't the same in the group buffer and on the SPC prompt.
-
-@item
- Interacting with rmail fcc isn't easy.
-
-@item
-@example
- Hypermail:
-<URL:http://www.falch.no/people/pepper/DSSSL-Lite/archives/>
-<URL:http://www.eit.com/software/hypermail/hypermail.html>
-<URL:http://homer.ncm.com/>
-<URL:http://www.yahoo.com/Computers_and_Internet/Internet/World_Wide_Web/HTML_Converters/>
-http://www.uwsg.indiana.edu/hypermail/linux/kernel/9610/index.html
-<URL:http://union.ncsa.uiuc.edu/HyperNews/get/www/html/converters.html>
-http://www.miranova.com/gnus-list/
-
-@end example
-
-@item
-@samp{^-- } is made into - in LaTeX.
-
-@item
- gnus-kill is much slower than it was in GNUS 4.1.3.
-
-@item
- when expunging articles on low score, the sparse nodes keep hanging on?
-@item
- starting the first time seems to hang Gnus on some systems. Does
-NEWGROUPS answer too fast?
-@item
- nndir doesn't read gzipped files.
-@item
- FAQ doesn't have an up node?
-@item
- when moving mail from a procmail spool to the crash-box,
-the crash-box is only appropriate to one specific group.
-@item
- `t' `t' makes X-Faces disappear.
-@item
- nnmh-be-safe means that crossposted articles will
-be marked as unread.
-@item
- Orphan score entries don't show on "V t" score trace
-@item
- when clearing out data, the cache data should also be reset.
-@item
- rewrite gnus-summary-limit-children to be non-recursive
-to avoid exceeding lisp nesting on huge groups.
-@item
- expunged articles are counted when computing scores.
-@item
- implement gnus-batch-brew-soup
-@item
- ticked articles aren't easy to read in pick mode -- `n' and
-stuff just skips past them. Read articles are the same.
-@item
- topics that contain just groups with ticked
-articles aren't displayed.
-@item
- nndoc should always allocate unique Message-IDs.
-@item
- If there are mail groups the first time you use Gnus, Gnus'll
-make the mail groups killed.
-@item
- no "no news is good news" when using topics.
-@item
- when doing crosspost marking, the cache has to be consulted
-and articles have to be removed.
-@item
- nnweb should fetch complete articles when they are split into several
-parts.
-@item
- scoring on head immediate doesn't work.
-@item
- finding short score file names takes forever.
-@item
- canceling articles in foreign groups.
-@item
- nntp-open-rlogin no longer works.
-@item
- C-u C-x C-s (Summary) switches to the group buffer.
-@item
- move nnmail-split-history out to the backends.
-@item
- nnweb doesn't work properly.
-@item
- using a virtual server name as `gnus-select-method' doesn't work?
-@item
- when killing/yanking a group from one topic to another in a slave, the
-master will yank it first to one topic and then add it to another.
-Perhaps.
-
-@item
- warn user about `=' redirection of a group in the active file?
-@item
- really unbinhex binhex files.
-@item
- take over the XEmacs menubar and offer a toggle between the XEmacs
-bar and the Gnus bar.
-@item
-@example
- push active file and NOV file parsing down into C code.
-`(canonize-message-id id)'
-`(mail-parent-message-id references n)'
-`(parse-news-nov-line &optional dependency-hashtb)'
-`(parse-news-nov-region beg end &optional dependency-hashtb fullp)'
-`(parse-news-active-region beg end hashtb)'
-
-@end example
-
-@item
- nnml .overview directory with splits.
-@item
- asynchronous cache
-@item
- postponed commands.
-@item
- the selected article show have its Subject displayed in its summary line.
-@item
- when entering groups, get the real number of unread articles from
-the server?
-@item
- sort after gathering threads -- make false roots have the
-headers of the oldest orphan with a 0 article number?
-@item
- nndoc groups should inherit the score files of their parents? Also
-inherit copy prompts and save files.
-@item
- command to start up Gnus (if not running) and enter a mail mode buffer.
-@item
- allow editing the group description from the group buffer
-for backends that support that.
-@item
-gnus-hide,show-all-topics
-@item
- groups and sub-topics should be allowed to mingle inside each topic,
-and not just list all subtopics at the end.
-@item
- a command to remove all read articles that are not needed to connect
-threads -- `gnus-summary-limit-to-sparse-unread'?
-@item
- a variable to turn off limiting/cutting of threads in the tree buffer.
-@item
- a variable to limit how many files are uudecoded.
-@item
- add zombie groups to a special "New Groups" topic.
-@item
- server mode command: close/open all connections
-@item
- put a file date in gnus-score-alist and check whether the file
-has been changed before using it.
-@item
- on exit from a digest group, go to the next article in the parent group.
-@item
- hide (sub)threads with low score.
-@item
- when expiring, remove all marks from expired articles.
-@item
- gnus-summary-limit-to-body
-@item
- a regexp alist that says what level groups are to be subscribed
-on. Eg. -- `(("nnml:" . 1))'.
-@item
- easier interface to nnkiboze to create ephemeral groups that
-contain groups that match a regexp.
-@item
- allow newlines in <URL:> urls, but remove them before using
-the URL.
-@item
- If there is no From line, the mail backends should fudge one from the
-"From " line.
-@item
- fuzzy simplifying should strip all non-alpha-numerical info
-from subject lines.
-@item
- gnus-soup-brew-soup-with-high-scores.
-@item
- nntp-ping-before-connect
-@item
- command to check whether NOV is evil. "list overview.fmt".
-@item
- when entering a group, Gnus should look through the score
-files very early for `local' atoms and set those local variables.
-@item
- message annotations.
-@item
- topics are always yanked before groups, and that's not good.
-@item
- (set-extent-property extent 'help-echo "String to display in minibuf")
-to display help in the minibuffer on buttons under XEmacs.
-@item
- allow group line format spec to say how many articles there
-are in the cache.
-@item
- AUTHINFO GENERIC
-@item
- support qmail maildir spools
-@item
- `run-with-idle-timer' in gnus-demon.
-@item
- stop using invisible text properties and start using overlays instead
-@item
- C-c C-f C-e to add an Expires header.
-@item
- go from one group to the next; everything is expunged; go to the
-next group instead of going to the group buffer.
-@item
- gnus-renumber-cache -- to renumber the cache using "low" numbers.
-@item
- record topic changes in the dribble buffer.
-@item
- `nnfolder-generate-active-file' should look at the folders it
-finds and generate proper active ranges.
-@item
- nneething-look-in-files-for-article-heads variable to control
-whether nneething should sniff all files in the directories.
-@item
- gnus-fetch-article -- start Gnus, enter group, display article
-@item
- gnus-dont-move-articles-to-same-group variable when respooling.
-@item
- when messages are crossposted between several auto-expirable groups,
-articles aren't properly marked as expirable.
-@item
- nneething should allow deletion/moving.
-@item
- TAB on the last button should go to the first button.
-@item
- if the car of an element in `mail-split-methods' is a function,
-and the function returns non-nil, use that as the name of the group(s) to
-save mail in.
-@item
- command for listing all score files that have been applied.
-@item
- a command in the article buffer to return to `summary' config.
-@item
- `gnus-always-post-using-current-server' -- variable to override
-`C-c C-c' when posting.
-@item
- nnmail-group-spool-alist -- says where each group should use
-as a spool file.
-@item
- when an article is crossposted to an auto-expirable group, the article
-should be marker as expirable.
-@item
- article mode command/menu for "send region as URL to browser".
-@item
- on errors, jump to info nodes that explain the error. For instance,
-on invalid From headers, or on error messages from the nntp server.
-@item
- when gathering threads, make the article that has no "Re: " the parent.
-Also consult Date headers.
-@item
- a token in splits to call shrink-window-if-larger-than-buffer
-@item
- `1 0 A M' to do matches on the active hashtb.
-@item
- duplicates -- command to remove Gnus-Warning header, use the read
-Message-ID, delete the "original".
-@item
- when replying to several messages at once, put the "other" message-ids
-into a See-Also header.
-@item
- support setext: URL:http://www.bsdi.com/setext/
-@item
- support ProleText: <URL:http://proletext.clari.net/prole/proletext.html>
-@item
- when browsing a foreign server, the groups that are already subscribed
-should be listed as such and not as "K".
-@item
- generate font names dynamically.
-@item
- score file mode auto-alist.
-@item
- allow nndoc to change/add/delete things from documents. Implement
-methods for each format for adding an article to the document.
-@item
- `gnus-fetch-old-headers' `all' value to incorporate
-absolutely all headers there is.
-@item
- function like `|', but concatenate all marked articles
-and pipe them to the process.
-@item
- cache the list of killed (or active) groups in a separate file. Update
-the file whenever we read the active file or the list
-of killed groups in the .eld file reaches a certain length.
-@item
- function for starting to edit a file to put into
-the current mail group.
-@item
- score-find-trace should display the total score of the article.
-@item
- "ghettozie" -- score on Xref header and nix it out after using it
-to avoid marking as read in other groups it has been crossposted to.
-@item
- look at procmail splitting. The backends should create
-the groups automatically if a spool file exists for that group.
-@item
- function for backends to register themselves with Gnus.
-@item
- when replying to several process-marked articles,
-have all the From end up in Cc headers? Variable to toggle.
-@item
- command to delete a crossposted mail article from all
-groups it has been mailed to.
-@item
- `B c' and `B m' should be crosspost aware.
-@item
- hide-pgp should also hide PGP public key blocks.
-@item
- Command in the group buffer to respool process-marked groups.
-@item
- `gnus-summary-find-matching' should accept
-pseudo-"headers" like "body", "head" and "all"
-@item
- When buttifying <URL: > things, all white space (including
-newlines) should be ignored.
-@item
- Process-marking all groups in a topic should process-mark
-groups in subtopics as well.
-@item
- Add non-native groups to the list of killed groups when killing them.
-@item
- nntp-suggest-kewl-config to probe the nntp server and suggest
-variable settings.
-@item
- add edit and forward secondary marks.
-@item
- nnml shouldn't visit its .overview files.
-@item
- allow customizing sorting within gathered threads.
-@item
- `B q' shouldn't select the current article.
-@item
- nnmbox should support a newsgroups file for descriptions.
-@item
- allow fetching mail from several pop servers.
-@item
- Be able to specify whether the saving commands save the original
-or the formatted article.
-@item
- a command to reparent with the child process-marked (cf. `T ^'.).
-@item
- I think the possibility to send a password with nntp-open-rlogin
-should be a feature in Red Gnus.
-@item
- The `Z n' command should be possible to execute from a mouse click.
-@item
- more limiting functions -- date, etc.
-@item
- be able to limit on a random header; on body; using reverse matches.
-@item
- a group parameter (`absofucking-total-expiry') that will make Gnus expire
-even unread articles.
-@item
- a command to print the article buffer as postscript.
-@item
- variable to disable password fetching when opening by nntp-open-telnet.
-@item
- manual: more example servers -- nntp with rlogin, telnet
-@item
- checking for bogus groups should clean topic alists as well.
-@item
- canceling articles in foreign groups.
-@item
- article number in folded topics isn't properly updated by
-Xref handling.
-@item
- Movement in the group buffer to the next unread group should go to the
-next closed topic with unread messages if no group can be found.
-@item
- Extensive info pages generated on the fly with help everywhere --
-in the "*Gnus edit*" buffers, for instance.
-@item
- Topic movement commands -- like thread movement. Up, down, forward, next.
-@item
- a way to tick/mark as read Gcc'd articles.
-@item
- a way to say that all groups within a specific topic comes
-from a particular server? Hm.
-@item
- `gnus-article-fill-if-long-lines' -- a function to fill
-the article buffer if there are any looong lines there.
-@item
- `T h' should jump to the parent topic and fold it.
-@item
- a command to create an ephemeral nndoc group out of a file,
-and then splitting it/moving it to some other group/backend.
-@item
- a group parameter for nnkiboze groups that says that
-all kibozed articles should be entered into the cache.
-@item
- It should also probably be possible to delimit what
-`gnus-jog-cache' does -- for instance, work on just some groups, or on
-some levels, and entering just articles that have a score higher than
-a certain number.
-@item
- nnfolder should append to the folder instead of re-writing
-the entire folder to disk when accepting new messages.
-@item
- allow all backends to do the proper thing with .gz files.
-@item
- a backend for reading collections of babyl files nnbabylfolder?
-@item
- a command for making the native groups into foreign groups.
-@item
- server mode command for clearing read marks from all groups
-from a server.
-@item
- when following up multiple articles, include all To, Cc, etc headers
-from all articles.
-@item
- a command for deciding what the total score of the current
-thread is. Also a way to highlight based on this.
-@item
- command to show and edit group scores
-@item
- a gnus-tree-minimize-horizontal to minimize tree buffers
-horizontally.
-@item
- command to generate nnml overview file for one group.
-@item
- `C-u C-u a' -- prompt for many crossposted groups.
-@item
- keep track of which mail groups have received new articles (in this session).
-Be able to generate a report and perhaps do some marking in the group
-buffer.
-@item
- gnus-build-sparse-threads to a number -- build only sparse threads
-that are of that length.
-@item
- have nnmh respect mh's unseen sequence in .mh_profile.
-@item
- cache the newsgroups descriptions locally.
-@item
- asynchronous posting under nntp.
-@item
- be able to control word adaptive scoring from the score files.
-@item
- a variable to make `C-c C-c' post using the "current" select method.
-@item
- `limit-exclude-low-scored-articles'.
-@item
- if `gnus-summary-show-thread' is a number, hide threads that have
-a score lower than this number.
-@item
- split newsgroup subscription variable up into "order" and "method".
-@item
- buttonize ange-ftp file names.
-@item
- a command to make a duplicate copy of the current article
-so that each copy can be edited separately.
-@item
- nnweb should allow fetching from the local nntp server.
-@item
- record the sorting done in the summary buffer so that
-it can be repeated when limiting/regenerating the buffer.
-@item
- nnml-generate-nov-databses should generate for
-all nnml servers.
-@item
- when the user does commands in the group buffer, check
-the modification time of the .newsrc.eld file and use
-ask-user-about-supersession-threat. Also warn when trying
-to save .newsrc.eld and it has changed.
-@item
- M-g on a topic will display all groups with 0 articles in
-the topic.
-@item
- command to remove all topic stuff.
-@item
- allow exploding incoming digests when reading incoming mail
-and splitting the resulting digests.
-@item
- nnsoup shouldn't set the `message-' variables.
-@item
- command to nix out all nnoo state information.
-@item
- nnmail-process-alist that calls functions if group names
-matches an alist -- before saving.
-@item
- use buffer-invisibility-spec everywhere for hiding text.
-@item
- variable to activate each group before entering them
-to get the (new) number of articles. `gnus-activate-before-entering'.
-@item
- command to fetch a Message-ID from any buffer, even
-starting Gnus first if necessary.
-@item
- when posting and checking whether a group exists or not, just
-ask the nntp server instead of relying on the active hashtb.
-@item
- buttonize the output of `C-c C-a' in an apropos-like way.
-@item
- `G p' should understand process/prefix, and allow editing
-of several groups at once.
-@item
- command to create an ephemeral nnvirtual group that
-matches some regexp(s).
-@item
- nndoc should understand "Content-Type: message/rfc822" forwarded messages.
-@item
- it should be possible to score "thread" on the From header.
-@item
- hitting RET on a "gnus-uu-archive" pseudo article should unpack it.
-@item
- `B i' should display the article at once in the summary buffer.
-@item
- remove the "*" mark at once when unticking an article.
-@item
- `M-s' should highlight the matching text.
-@item
- when checking for duplicated mails, use Resent-Message-ID if present.
-@item
- killing and yanking groups in topics should be better. If killing one copy
-of a group that exists in multiple topics, only that copy should
-be removed. Yanking should insert the copy, and yanking topics
-should be possible to be interspersed with the other yankings.
-@item
- command for enter a group just to read the cached articles. A way to say
-"ignore the nntp connection; just read from the cache."
-@item
- `X u' should decode base64 articles.
-@item
- a way to hide all "inner" cited text, leaving just the most
-recently cited text.
-@item
- nnvirtual should be asynchronous.
-@item
- after editing an article, gnus-original-article-buffer should
-be invalidated.
-@item
- there should probably be a way to make Gnus not connect to the
-server and just read the articles in the server
-@item
- allow a `set-default' (or something) to change the default
-value of nnoo variables.
-@item
- a command to import group infos from a .newsrc.eld file.
-@item
- groups from secondary servers have the entire select method
-listed in each group info.
-@item
- a command for just switching from the summary buffer to the group
-buffer.
-@item
- a way to specify that some incoming mail washing functions
-should only be applied to some groups.
-@item
- Message `C-f C-t' should ask the user whether to heed
-mail-copies-to: never.
-@item
- new group parameter -- `post-to-server' that says to post
-using the current server. Also a variable to do the same.
-@item
- the slave dribble files should auto-save to the slave file names.
-@item
- a group parameter that says what articles to display on group entry, based
-on article marks.
-@item
- a way to visually distinguish slave Gnusae from masters. (Whip instead
-of normal logo?)
-@item
- Use DJ Bernstein "From " quoting/dequoting, where applicable.
-@item
- Why is hide-citation-maybe and hide-citation different? Also
-clear up info.
-@item
- group user-defined meta-parameters.
-
-
-
-From: John Griffith <griffith@@sfs.nphil.uni-tuebingen.de>
-@item
- I like the option for trying to retrieve the FAQ for a group and I was
-thinking it would be great if for those newsgroups that had archives
-you could also try to read the archive for that group. Part of the
-problem is that archives are spread all over the net, unlike FAQs.
-What would be best I suppose is to find the one closest to your site.
-
-In any case, there is a list of general news group archives at @*
-ftp://ftp.neosoft.com/pub/users/claird/news.lists/newsgroup_archives.html
-
-
-
-
-@item
-@example
-From: Jason L Tibbitts III <tibbs@@hpc.uh.edu>
-(add-hook 'gnus-select-group-hook
- (lambda ()
- (gnus-group-add-parameter group
- (cons 'gnus-group-date-last-entered (list (current-time-string))))))
-
-(defun gnus-user-format-function-d (headers)
- "Return the date the group was last read."
- (cond ((car (gnus-group-get-parameter gnus-tmp-group 'gnus-group-date-last-entered)))
- (t "")))
-@end example
-
-@item
- tanken var at når du bruker `gnus-startup-file' som prefix (FOO) til å lete
-opp en fil FOO-SERVER, FOO-SERVER.el, FOO-SERVER.eld, kan du la den være en
-liste hvor du bruker hvert element i listen som FOO, istedet. da kunne man
-hatt forskjellige serveres startup-filer forskjellige steder.
-
-
-@item
-LMI> Well, nnbabyl could alter the group info to heed labels like
-LMI> answered and read, I guess.
-
-It could also keep them updated (the same for the Status: header of
-unix mbox files).
-
-They could be used like this:
-
-
-@example
-`M l <name> RET' add label <name> to current message.
-`M u <name> RET' remove label <name> from current message.
-`/ l <expr> RET' limit summary buffer according to <expr>.
-
-<expr> would be a boolean expression on the labels, e.g.
-
-`/ l bug & !fixed RET'
-@end example
-
-would show all the messages which are labeled `bug' but not labeled
-`fixed'.
-
-One could also imagine the labels being used for highlighting, or
-affect the summary line format.
-
-
-@item
-Sender: abraham@@dina.kvl.dk
-
-I'd like a gnus-find-file which work like find file, except that it
-would recognize things that looks like messages or folders:
-
-- If it is a directory containing numbered files, create an nndir
-summary buffer.
-
-- For other directories, create a nneething summary buffer.
-
-- For files matching "\\`From ", create a nndoc/mbox summary.
-
-- For files matching "\\`BABYL OPTIONS:", create a nndoc/baby summary.
-
-- For files matching "\\`[^ \t\n]+:", create an *Article* buffer.
-
-- For other files, just find them normally.
-
-I'd like `nneething' to use this function, so it would work on a
-directory potentially containing mboxes or babyl files.
-
-@item
-Please send a mail to bwarsaw@@cnri.reston.va.us (Barry A. Warsaw) and
-tell him what you are doing.
-
-@item
-Currently, I get prompted:
-
-decend into sci?
-- type y
-decend into sci.something ?
-- type n
-decend into ucd?
-
-The problem above is that since there is really only one subsection of
-science, shouldn't it prompt you for only descending sci.something? If
-there was a sci.somethingelse group or section, then it should prompt
-for sci? first the sci.something? then sci.somethingelse?...
-
-@item
-Ja, det burde være en måte å si slikt. Kanskje en ny variabel?
-`gnus-use-few-score-files'? Så kunne score-regler legges til den
-"mest" lokale score-fila. F. eks. ville no-gruppene betjenes av
-"no.all.SCORE", osv.
-
-@item
-What i want is for Gnus to treat any sequence or combination of the following
-as a single spoiler warning and hide it all, replacing it with a "Next Page"
-button:
-
-
-^L's
-
-more than n blank lines
-
-more than m identical lines
-(which should be replaced with button to show them)
-
-any whitespace surrounding any of the above
-
-
-@item
-Well, we could allow a new value to `gnus-thread-ignore-subject' --
-`spaces', or something. (We could even default to that.) And then
-subjects that differ in white space only could be considered the
-"same" subject for threading purposes.
-
-@item
-Modes to preprocess the contents (e.g. jka-compr) use the second form
-"(REGEXP FUNCTION NON-NIL)" while ordinary modes (e.g. tex) use the first
-form "(REGEXP . FUNCTION)", so you could use it to distinguish between
-those two types of modes. (auto-modes-alist, insert-file-contents-literally.)
-
-@item
- Under XEmacs -- do funny article marks:
-tick - thumb tack
-killed - skull
-soup - bowl of soup
-score below - dim light bulb
-score over - bright light bulb
-
-@item
-Yes. I think the algorithm is as follows:
-
-@example
-Group-mode
-
- show-list-of-articles-in-group
- if (key-pressed == SPACE)
- if (no-more-articles-in-group-to-select)
- if (articles-selected)
- start-reading-selected-articles;
- junk-unread-articles;
- next-group;
- else
- show-next-page;
-
- else if (key-pressed = '.')
- if (consolidated-menus) # same as hide-thread in Gnus
- select-thread-under-cursor;
- else
- select-article-under-cursor;
-
-
-Article-mode
- if (key-pressed == SPACE)
- if (more-pages-in-article)
- next-page;
- else if (more-selected-articles-to-read)
- next-article;
- else
- next-group;
-@end example
-
-@item
-My precise need here would have been to limit files to Incoming*.
-One could think of some `nneething-only-files' variable, but I guess
-it would have been unacceptable if one was using many unrelated such
-nneething groups.
-
-A more useful approach would be to, in response to the `G D' prompt, be
-allowed to say something like: `~/.mail/Incoming*', somewhat limiting
-the top-level directory only (in case directories would be matched by
-the wildcard expression).
-
-@item
-It would be nice if it also handled
-
- <URL:news://sunsite.auc.dk/>
-
-which should correspond to `B nntp RET sunsite.auc.dk' in *Group*.
-
-
-@item
-
- Take a look at w3-menu.el in the Emacs-W3 distribution - this works out
-really well. Each menu is 'named' by a symbol that would be on a
-gnus-*-menus (where * would be whatever, but at least group, summary, and
-article versions) variable.
-
- So for gnus-summary-menus, I would set to '(sort mark dispose ...)
-
- A value of '1' would just put _all_ the menus in a single 'GNUS' menu in
-the main menubar. This approach works really well for Emacs-W3 and VM.
-
-
-@item
- nndoc should take care to create unique Message-IDs for all its
-articles.
-@item
- gnus-score-followup-article only works when you have a summary buffer
-active. Make it work when posting from the group buffer as well.
-(message-sent-hook).
-@item
- rewrite gnus-demon to use run-with-idle-timers.
-
-@item
- * Enhancements to Gnus:
-
- Add two commands:
-
- * gnus-servers (gnus-start-server-buffer?)--enters Gnus and goes
- straight to the server buffer, without opening any connections to
- servers first.
-
- * gnus-server-read-server-newsrc--produces a buffer very similar to
- the group buffer, but with only groups from that server listed;
- quitting this buffer returns to the server buffer.
-
-@item
- add a command to check the integrity of an nnfolder folder --
-go through the article numbers and see that there are no duplicates,
-and stuff.
-
-@item
- `unsmileyfy-buffer' to undo smileification.
-
-@item
- a command to give all relevant info on an article, including all
-secondary marks.
-
-@item
- when doing `-request-accept-article', the backends should do
-the nnmail duplicate checking.
-
-@item
- allow `message-signature-file' to be a function to return the
-value of the signature file.
-
-@item
- In addition, I would love it if I could configure message-tab so that it
-could call `bbdb-complete-name' in other headers. So, some sort of
-interface like
-
-(setq message-tab-alist
- '((message-header-regexp message-expand-group)
- ("^\\(To\\|[cC]c\\|[bB]cc\\)" bbdb-complete-name)))
-
-then you could run the relevant function to complete the information in
-the header
-
-@item
- cache the newsgroups file locally to avoid reloading it all the time.
-
-@item
- a command to import a buffer into a group.
-
-@item
- nnweb should allow fetching by Message-ID from servers.
-
-@item
- point in the article buffer doesn't always go to the
-beginning of the buffer when selecting new articles.
-
-@item
- a command to process mark all unread articles.
-
-@item
- `gnus-gather-threads-by-references-and-subject' -- first
-do gathering by references, and then go through the dummy roots and
-do more gathering by subject.
-
-@item
- gnus-uu-mark-in-numerical-order -- process mark articles in
-article numerical order.
-
-@item
- (gnus-thread-total-score
- (gnus-id-to-thread (mail-header-id (gnus-summary-article-header))))
-bind to a key.
-
-@item
- sorting by score is wrong when using sparse threads.
-
-@item
- a command to fetch an arbitrary article -- without having to be
-in the summary buffer.
-
-@item
- a new nncvs backend. Each group would show an article, using
-version branches as threading, checkin date as the date, etc.
-
-@item
- http://www.dejanews.com/forms/dnsetfilter_exp.html ?
-This filter allows one to construct advance queries on the Dejanews
-database such as specifying start and end dates, subject, author,
-and/or newsgroup name.
-
-@item
- new Date header scoring type -- older, newer
-
-@item
- use the summary toolbar in the article buffer.
-
-@item
- a command to fetch all articles that are less than X days old.
-
-@item
- in pick mode, `q' should save the list of selected articles in the
-group info. The next time the group is selected, these articles
-will automatically get the process mark.
-
-@item
- Isn't it possible to (also?) allow M-^ to automatically try the
-default server if it fails on the current server? (controlled by a
-user variable, (nil, t, 'ask)).
-
-@item
- make it possible to cancel articles using the select method for the
-current group.
-
-@item
- `gnus-summary-select-article-on-entry' or something. It'll default
-to t and will select whatever article decided by `gnus-auto-select-first'.
-
-@item
- a new variable to control which selection commands should be unselecting.
-`first', `best', `next', `prev', `next-unread', `prev-unread' are
-candidates.
-
-@item
- be able to select groups that have no articles in them
-to be able to post in them (using the current select method).
-
-@item
- be able to post via DejaNews.
-
-@item
- `x' should retain any sortings that have been performed.
-
-@item
- allow the user to specify the precedence of the secondary marks. Also
-allow them to be displayed separately.
-
-@item
- gnus-summary-save-in-pipe should concatenate the results from
-the processes when doing a process marked pipe.
-
-@item
- a new match type, like Followup, but which adds Thread matches on all
-articles that match a certain From header.
-
-@item
- a function that can be read from kill-emacs-query-functions to offer
-saving living summary buffers.
-
-@item
- a function for selecting a particular group which will contain
-the articles listed in a list of article numbers/id's.
-
-@item
- a battery of character translation functions to translate common
-Mac, MS (etc) characters into ISO 8859-1.
-
-@example
-(defun article-fix-m$word ()
- "Fix M$Word smartquotes in an article."
- (interactive)
- (save-excursion
- (let ((buffer-read-only nil))
- (goto-char (point-min))
- (while (search-forward "\221" nil t)
- (replace-match "`" t t))
- (goto-char (point-min))
- (while (search-forward "\222" nil t)
- (replace-match "'" t t))
- (goto-char (point-min))
- (while (search-forward "\223" nil t)
- (replace-match "\"" t t))
- (goto-char (point-min))
- (while (search-forward "\224" nil t)
- (replace-match "\"" t t)))))
-@end example
-
-@item
-@example
- (add-hook 'gnus-exit-query-functions
-'(lambda ()
- (if (and (file-exists-p nnmail-spool-file)
- (> (nnheader-file-size nnmail-spool-file) 0))
- (yes-or-no-p "New mail has arrived. Quit Gnus anyways? ")
- (y-or-n-p "Are you sure you want to quit Gnus? "))))
-@end example
-
-@item
- allow message-default-headers to be a function.
-
-@item
- new Date score match types -- < > = (etc) that take floating point
-numbers and match on the age of the article.
-
-@item
-@example
-> > > If so, I've got one gripe: It seems that when I fire up gnus 5.2.25
-> > > under xemacs-19.14, it's creating a new frame, but is erasing the
-> > > buffer in the frame that it was called from =:-O
->
-> > Hm. How do you start up Gnus? From the toolbar or with
-> > `M-x gnus-other-frame'?
->
-> I normally start it up from the toolbar; at
-> least that's the way I've caught it doing the
-> deed before.
-@end example
-
-@item
- all commands that react to the process mark should push
-the current process mark set onto the stack.
-
-@item
- gnus-article-hide-pgp
-Selv ville jeg nok ha valgt å slette den dersom teksten matcher
-@example
-"\\(This\s+\\)?[^ ]+ has been automatically signed by"
-@end example
-og det er maks hundre tegn mellom match-end og ----linja. Men -det-
-er min type heuristikk og langt fra alles.
-
-@item
- `gnus-subscribe-sorted' -- insert new groups where they would have been
-sorted to if `gnus-group-sort-function' were run.
-
-@item
- gnus-(group,summary)-highlight should respect any `face' text props set
-on the lines.
-
-@item
- use run-with-idle-timer for gnus-demon instead of the
-home-brewed stuff for better reliability.
-
-@item
- add a way to select which NoCeM type to apply -- spam, troll, etc.
-
-@item
- nndraft-request-group should tally auto-save files.
-
-@item
- implement nntp-retry-on-break and nntp-command-timeout.
-
-@item
- gnus-article-highlight-limit that says when not to highlight (long)
-articles.
-
-@item
- (nnoo-set SERVER VARIABLE VALUE)
-
-@item
- nn*-spool-methods
-
-@item
- interrupitng agent fetching of articles should save articles.
-
-@item
- command to open a digest group, and copy all the articles there to the
-current group.
-
-@item
- a variable to disable article body highlights if there's more than
-X characters in the body.
-
-@item
- handle 480/381 authinfo requests separately.
-
-@item
- include the texi/dir file in the distribution.
-
-@item
- format spec to "tab" to a position.
-
-@item
- Move all prompting to the new `M-n' default style.
-
-@item
- command to display all dormant articles.
-
-@item
- gnus-auto-select-next makeover -- list of things it should do.
-
-@item
- a score match type that adds scores matching on From if From has replied
-to something someone else has said.
-
-@item
- Read Netscape discussion groups:
-snews://secnews.netscape.com/netscape.communicator.unix
-
-@item
-One command to edit the original version if an article, and one to edit
-the displayed version.
-
-@item
-@kbd{T v} -- make all process-marked articles the children of the
-current article.
-
-@item
-Switch from initial text to the new default text mechanism.
-
-@item
-How about making it possible to expire local articles? Will it be
-possible to make various constraints on when an article can be
-expired, e.g. (read), (age > 14 days), or the more interesting (read
-& age > 14 days)?
-
-@item
-New limit command---limit to articles that have a certain string
-in the head or body.
-
-@item
-Allow breaking lengthy NNTP commands.
-
-@item
-gnus-article-highlight-limit, to disable highlighting in big articles.
-
-@item
-Editing an article should put the article to be edited
-in a special, unique buffer.
-
-@item
-A command to send a mail to the admin-address group param.
-
-@item
-A Date scoring type that will match if the article
-is less than a certain number of days old.
-
-@item
-New spec: %~(tab 56) to put point on column 56
-
-@item
-Allow Gnus Agent scoring to use normal score files.
-
-@item
-Rething the Agent active file thing. `M-g' doesn't update the active
-file, for instance.
-
-@item
-With dummy roots, `^' and then selecing the first article
-in any other dummy thread will make Gnus highlight the
-dummy root instead of the first article.
-
-@item
-Propagate all group properties (marks, article numbers, etc) up to the
-topics for displaying.
-
-@item
-`n' in the group buffer with topics should go to the next group
-with unread articles, even if that group is hidden in a topic.
-
-@item
-gnus-posting-styles doesn't work in drafts.
-
-@item
-gnus-summary-limit-include-cached is slow when there are
-many articles in the cache, since it regenerates big parts of the
-summary buffer for each article.
-
-@item
-Implement gnus-batch-brew-soup.
-
-@item
-Group parameters and summary commands for un/subscribing to mailing
-lists.
-
-@item
-Introduce nnmail-home-directory.
-
-@item
-gnus-fetch-group and friends should exit Gnus when the user
-exits the group.
-
-@item
-The jingle is only played on the second invocation of Gnus.
-
-@item
-Bouncing articles should do MIME.
-
-@item
-Crossposted articles should "inherit" the % or @ mark from the other
-groups it has been crossposted to, or something. (Agent.)
-
-@item
-`S D r' should allow expansion of aliases.
-
-@item
-If point is on a group that appears multiple times in topics, and
-you press `l', point will move to the first instance of the group.
-
-@item
-The documentation should mention pop3.el, fetchmail, smtpmail and why
-po:username often fails.
-
-@item
-Fetch by Message-ID from dejanews.
-
-<URL:http://search.dejanews.com/msgid.xp?MID=%3C62h9l9$hm4@@basement.replay.com%3E&fmt=raw>
-
-@item
-Solve the halting problem.
-
-@c TODO
-@end itemize
-
-@iftex
-
-@page
-@node The Manual
-@section The Manual
-@cindex colophon
-@cindex manual
-
-This manual was generated from a TeXinfo file and then run through
-either @code{texi2dvi}
-@iflatex
-or my own home-brewed TeXinfo to \LaTeX\ transformer,
-and then run through @code{latex} and @code{dvips}
-@end iflatex
-to get what you hold in your hands now.
-
-The following conventions have been used:
-
-@enumerate
-
-@item
-This is a @samp{string}
-
-@item
-This is a @kbd{keystroke}
-
-@item
-This is a @file{file}
-
-@item
-This is a @code{symbol}
-
-@end enumerate
-
-So if I were to say ``set @code{flargnoze} to @samp{yes}'', that would
-mean:
-
-@lisp
-(setq flargnoze "yes")
-@end lisp
-
-If I say ``set @code{flumphel} to @code{yes}'', that would mean:
-
-@lisp
-(setq flumphel 'yes)
-@end lisp
-
-@samp{yes} and @code{yes} are two @emph{very} different things---don't
-ever get them confused.
-
-@iflatex
-@c @head
-Of course, everything in this manual is of vital interest, so you should
-read it all. Several times. However, if you feel like skimming the
-manual, look for that gnu head you should see in the margin over
-there---it means that what's being discussed is of more importance than
-the rest of the stuff. (On the other hand, if everything is infinitely
-important, how can anything be more important than that? Just one more
-of the mysteries of this world, I guess.)
-@end iflatex
-
-@end iftex
-
-
-@page
-@node Terminology
-@section Terminology
-
-@cindex terminology
-@table @dfn
-
-@item news
-@cindex news
-This is what you are supposed to use this thing for---reading news.
-News is generally fetched from a nearby @sc{nntp} server, and is
-generally publicly available to everybody. If you post news, the entire
-world is likely to read just what you have written, and they'll all
-snigger mischievously. Behind your back.
-
-@item mail
-@cindex mail
-Everything that's delivered to you personally is mail. Some news/mail
-readers (like Gnus) blur the distinction between mail and news, but
-there is a difference. Mail is private. News is public. Mailing is
-not posting, and replying is not following up.
-
-@item reply
-@cindex reply
-Send a mail to the person who has written what you are reading.
-
-@item follow up
-@cindex follow up
-Post an article to the current newsgroup responding to the article you
-are reading.
-
-@item backend
-@cindex backend
-Gnus gets fed articles from a number of backends, both news and mail
-backends. Gnus does not handle the underlying media, so to speak---this
-is all done by the backends.
-
-@item native
-@cindex native
-Gnus will always use one method (and backend) as the @dfn{native}, or
-default, way of getting news.
-
-@item foreign
-@cindex foreign
-You can also have any number of foreign groups active at the same time.
-These are groups that use non-native non-secondary backends for getting
-news.
-
-@item secondary
-@cindex secondary
-Secondary backends are somewhere half-way between being native and being
-foreign, but they mostly act like they are native.
-
-@item article
-@cindex article
-A message that has been posted as news.
-
-@item mail message
-@cindex mail message
-A message that has been mailed.
-
-@item message
-@cindex message
-A mail message or news article
-
-@item head
-@cindex head
-The top part of a message, where administrative information (etc.) is
-put.
-
-@item body
-@cindex body
-The rest of an article. Everything not in the head is in the
-body.
-
-@item header
-@cindex header
-A line from the head of an article.
-
-@item headers
-@cindex headers
-A collection of such lines, or a collection of heads. Or even a
-collection of @sc{nov} lines.
-
-@item @sc{nov}
-@cindex nov
-When Gnus enters a group, it asks the backend for the headers of all
-unread articles in the group. Most servers support the News OverView
-format, which is more compact and much faster to read and parse than the
-normal @sc{head} format.
-
-@item level
-@cindex levels
-Each group is subscribed at some @dfn{level} or other (1-9). The ones
-that have a lower level are ``more'' subscribed than the groups with a
-higher level. In fact, groups on levels 1-5 are considered
-@dfn{subscribed}; 6-7 are @dfn{unsubscribed}; 8 are @dfn{zombies}; and 9
-are @dfn{killed}. Commands for listing groups and scanning for new
-articles will all use the numeric prefix as @dfn{working level}.
-
-@item killed groups
-@cindex killed groups
-No information on killed groups is stored or updated, which makes killed
-groups much easier to handle than subscribed groups.
-
-@item zombie groups
-@cindex zombie groups
-Just like killed groups, only slightly less dead.
-
-@item active file
-@cindex active file
-The news server has to keep track of what articles it carries, and what
-groups exist. All this information in stored in the active file, which
-is rather large, as you might surmise.
-
-@item bogus groups
-@cindex bogus groups
-A group that exists in the @file{.newsrc} file, but isn't known to the
-server (i.e., it isn't in the active file), is a @emph{bogus group}.
-This means that the group probably doesn't exist (any more).
-
-@item activating
-@cindex activating groups
-The act of asking the server for info on a group and computing the
-number of unread articles is called @dfn{activating the group}.
-Un-activated groups are listed with @samp{*} in the group buffer.
-
-@item server
-@cindex server
-A machine one can connect to and get news (or mail) from.
-
-@item select method
-@cindex select method
-A structure that specifies the backend, the server and the virtual
-server settings.
-
-@item virtual server
-@cindex virtual server
-A named select method. Since a select method defines all there is to
-know about connecting to a (physical) server, taking the thing as a
-whole is a virtual server.
-
-@item washing
-@cindex washing
-Taking a buffer and running it through a filter of some sort. The
-result will (more often than not) be cleaner and more pleasing than the
-original.
-
-@item ephemeral groups
-@cindex ephemeral groups
-Most groups store data on what articles you have read. @dfn{Ephemeral}
-groups are groups that will have no data stored---when you exit the
-group, it'll disappear into the aether.
-
-@item solid groups
-@cindex solid groups
-This is the opposite of ephemeral groups. All groups listed in the
-group buffer are solid groups.
-
-@item sparse articles
-@cindex sparse articles
-These are article placeholders shown in the summary buffer when
-@code{gnus-build-sparse-threads} has been switched on.
-
-@item threading
-@cindex threading
-To put responses to articles directly after the articles they respond
-to---in a hierarchical fashion.
-
-@item root
-@cindex root
-@cindex thread root
-The first article in a thread is the root. It is the ancestor of all
-articles in the thread.
-
-@item parent
-@cindex parent
-An article that has responses.
-
-@item child
-@cindex child
-An article that responds to a different article---its parent.
-
-@item digest
-@cindex digest
-A collection of messages in one file. The most common digest format is
-specified by RFC1153.
-
-@end table
-
-
-@page
-@node Customization
-@section Customization
-@cindex general customization
-
-All variables are properly documented elsewhere in this manual. This
-section is designed to give general pointers on how to customize Gnus
-for some quite common situations.
-
-@menu
-* Slow/Expensive Connection:: You run a local Emacs and get the news elsewhere.
-* Slow Terminal Connection:: You run a remote Emacs.
-* Little Disk Space:: You feel that having large setup files is icky.
-* Slow Machine:: You feel like buying a faster machine.
-@end menu
-
-
-@node Slow/Expensive Connection
-@subsection Slow/Expensive @sc{nntp} Connection
-
-If you run Emacs on a machine locally, and get your news from a machine
-over some very thin strings, you want to cut down on the amount of data
-Gnus has to get from the @sc{nntp} server.
-
-@table @code
-
-@item gnus-read-active-file
-Set this to @code{nil}, which will inhibit Gnus from requesting the
-entire active file from the server. This file is often v. large. You
-also have to set @code{gnus-check-new-newsgroups} and
-@code{gnus-check-bogus-newsgroups} to @code{nil} to make sure that Gnus
-doesn't suddenly decide to fetch the active file anyway.
-
-@item gnus-nov-is-evil
-This one has to be @code{nil}. If not, grabbing article headers from
-the @sc{nntp} server will not be very fast. Not all @sc{nntp} servers
-support @sc{xover}; Gnus will detect this by itself.
-@end table
-
-
-@node Slow Terminal Connection
-@subsection Slow Terminal Connection
-
-Let's say you use your home computer for dialing up the system that runs
-Emacs and Gnus. If your modem is slow, you want to reduce (as much as
-possible) the amount of data sent over the wires.
-
-@table @code
-
-@item gnus-auto-center-summary
-Set this to @code{nil} to inhibit Gnus from re-centering the summary
-buffer all the time. If it is @code{vertical}, do only vertical
-re-centering. If it is neither @code{nil} nor @code{vertical}, do both
-horizontal and vertical recentering.
-
-@item gnus-visible-headers
-Cut down on the headers included in the articles to the
-minimum. You can, in fact, make do without them altogether---most of the
-useful data is in the summary buffer, anyway. Set this variable to
-@samp{^NEVVVVER} or @samp{From:}, or whatever you feel you need.
-
-@item gnus-article-display-hook
-Set this hook to all the available hiding commands:
-@lisp
-(setq gnus-article-display-hook
- '(gnus-article-hide-headers
- gnus-article-hide-signature
- gnus-article-hide-citation))
-@end lisp
-
-@item gnus-use-full-window
-By setting this to @code{nil}, you can make all the windows smaller.
-While this doesn't really cut down much generally, it means that you
-have to see smaller portions of articles before deciding that you didn't
-want to read them anyway.
-
-@item gnus-thread-hide-subtree
-If this is non-@code{nil}, all threads in the summary buffer will be
-hidden initially.
-
-@item gnus-updated-mode-lines
-If this is @code{nil}, Gnus will not put information in the buffer mode
-lines, which might save some time.
-@end table
-
-
-@node Little Disk Space
-@subsection Little Disk Space
-@cindex disk space
-
-The startup files can get rather large, so you may want to cut their
-sizes a bit if you are running out of space.
-
-@table @code
-
-@item gnus-save-newsrc-file
-If this is @code{nil}, Gnus will never save @file{.newsrc}---it will
-only save @file{.newsrc.eld}. This means that you will not be able to
-use any other newsreaders than Gnus. This variable is @code{t} by
-default.
-
-@item gnus-save-killed-list
-If this is @code{nil}, Gnus will not save the list of dead groups. You
-should also set @code{gnus-check-new-newsgroups} to @code{ask-server}
-and @code{gnus-check-bogus-newsgroups} to @code{nil} if you set this
-variable to @code{nil}. This variable is @code{t} by default.
-
-@end table
-
-
-@node Slow Machine
-@subsection Slow Machine
-@cindex slow machine
-
-If you have a slow machine, or are just really impatient, there are a
-few things you can do to make Gnus run faster.
-
-Set @code{gnus-check-new-newsgroups} and
-@code{gnus-check-bogus-newsgroups} to @code{nil} to make startup faster.
-
-Set @code{gnus-show-threads}, @code{gnus-use-cross-reference} and
-@code{gnus-nov-is-evil} to @code{nil} to make entering and exiting the
-summary buffer faster.
-
-Set @code{gnus-article-display-hook} to @code{nil} to make article
-processing a bit faster.
-
-
-@page
-@node Troubleshooting
-@section Troubleshooting
-@cindex troubleshooting
-
-Gnus works @emph{so} well straight out of the box---I can't imagine any
-problems, really.
-
-Ahem.
-
-@enumerate
-
-@item
-Make sure your computer is switched on.
-
-@item
-Make sure that you really load the current Gnus version. If you have
-been running @sc{gnus}, you need to exit Emacs and start it up again before
-Gnus will work.
-
-@item
-Try doing an @kbd{M-x gnus-version}. If you get something that looks
-like @samp{Gnus v5.46; nntp 4.0} you have the right files loaded. If,
-on the other hand, you get something like @samp{NNTP 3.x} or @samp{nntp
-flee}, you have some old @file{.el} files lying around. Delete these.
-
-@item
-Read the help group (@kbd{G h} in the group buffer) for a FAQ and a
-how-to.
-
-@item
-@vindex max-lisp-eval-depth
-Gnus works on many recursive structures, and in some extreme (and very
-rare) cases Gnus may recurse down ``too deeply'' and Emacs will beep at
-you. If this happens to you, set @code{max-lisp-eval-depth} to 500 or
-something like that.
-@end enumerate
-
-If all else fails, report the problem as a bug.
-
-@cindex bugs
-@cindex reporting bugs
-
-@kindex M-x gnus-bug
-@findex gnus-bug
-If you find a bug in Gnus, you can report it with the @kbd{M-x gnus-bug}
-command. @kbd{M-x set-variable RET debug-on-error RET t RET}, and send
-me the backtrace. I will fix bugs, but I can only fix them if you send
-me a precise description as to how to reproduce the bug.
-
-You really can never be too detailed in a bug report. Always use the
-@kbd{M-x gnus-bug} command when you make bug reports, even if it creates
-a 10Kb mail each time you use it, and even if you have sent me your
-environment 500 times before. I don't care. I want the full info each
-time.
-
-It is also important to remember that I have no memory whatsoever. If
-you send a bug report, and I send you a reply, and then you just send
-back ``No, it's not! Moron!'', I will have no idea what you are
-insulting me about. Always over-explain everything. It's much easier
-for all of us---if I don't have all the information I need, I will just
-mail you and ask for more info, and everything takes more time.
-
-If the problem you're seeing is very visual, and you can't quite explain
-it, copy the Emacs window to a file (with @code{xwd}, for instance), put
-it somewhere it can be reached, and include the URL of the picture in
-the bug report.
-
-If you just need help, you are better off asking on
-@samp{gnu.emacs.gnus}. I'm not very helpful.
-
-@cindex gnu.emacs.gnus
-@cindex ding mailing list
-You can also ask on the ding mailing list---@samp{ding@@gnus.org}.
-Write to @samp{ding-request@@gnus.org} to subscribe.
-
-
-@page
-@node Gnus Reference Guide
-@section Gnus Reference Guide
-
-It is my hope that other people will figure out smart stuff that Gnus
-can do, and that other people will write those smart things as well. To
-facilitate that I thought it would be a good idea to describe the inner
-workings of Gnus. And some of the not-so-inner workings, while I'm at
-it.
-
-You can never expect the internals of a program not to change, but I
-will be defining (in some details) the interface between Gnus and its
-backends (this is written in stone), the format of the score files
-(ditto), data structures (some are less likely to change than others)
-and general methods of operation.
-
-@menu
-* Gnus Utility Functions:: Common functions and variable to use.
-* Backend Interface:: How Gnus communicates with the servers.
-* Score File Syntax:: A BNF definition of the score file standard.
-* Headers:: How Gnus stores headers internally.
-* Ranges:: A handy format for storing mucho numbers.
-* Group Info:: The group info format.
-* Extended Interactive:: Symbolic prefixes and stuff.
-* Emacs/XEmacs Code:: Gnus can be run under all modern Emacsen.
-* Various File Formats:: Formats of files that Gnus use.
-@end menu
-
-
-@node Gnus Utility Functions
-@subsection Gnus Utility Functions
-@cindex Gnus utility functions
-@cindex utility functions
-@cindex functions
-@cindex internal variables
-
-When writing small functions to be run from hooks (and stuff), it's
-vital to have access to the Gnus internal functions and variables.
-Below is a list of the most common ones.
-
-@table @code
-
-@item gnus-newsgroup-name
-@vindex gnus-newsgroup-name
-This variable holds the name of the current newsgroup.
-
-@item gnus-find-method-for-group
-@findex gnus-find-method-for-group
-A function that returns the select method for @var{group}.
-
-@item gnus-group-real-name
-@findex gnus-group-real-name
-Takes a full (prefixed) Gnus group name, and returns the unprefixed
-name.
-
-@item gnus-group-prefixed-name
-@findex gnus-group-prefixed-name
-Takes an unprefixed group name and a select method, and returns the full
-(prefixed) Gnus group name.
-
-@item gnus-get-info
-@findex gnus-get-info
-Returns the group info list for @var{group}.
-
-@item gnus-group-unread
-@findex gnus-group-unread
-The number of unread articles in @var{group}, or @code{t} if that is
-unknown.
-
-@item gnus-active
-@findex gnus-active
-The active entry for @var{group}.
-
-@item gnus-set-active
-@findex gnus-set-active
-Set the active entry for @var{group}.
-
-@item gnus-add-current-to-buffer-list
-@findex gnus-add-current-to-buffer-list
-Adds the current buffer to the list of buffers to be killed on Gnus
-exit.
-
-@item gnus-continuum-version
-@findex gnus-continuum-version
-Takes a Gnus version string as a parameter and returns a floating point
-number. Earlier versions will always get a lower number than later
-versions.
-
-@item gnus-group-read-only-p
-@findex gnus-group-read-only-p
-Says whether @var{group} is read-only or not.
-
-@item gnus-news-group-p
-@findex gnus-news-group-p
-Says whether @var{group} came from a news backend.
-
-@item gnus-ephemeral-group-p
-@findex gnus-ephemeral-group-p
-Says whether @var{group} is ephemeral or not.
-
-@item gnus-server-to-method
-@findex gnus-server-to-method
-Returns the select method corresponding to @var{server}.
-
-@item gnus-server-equal
-@findex gnus-server-equal
-Says whether two virtual servers are equal.
-
-@item gnus-group-native-p
-@findex gnus-group-native-p
-Says whether @var{group} is native or not.
-
-@item gnus-group-secondary-p
-@findex gnus-group-secondary-p
-Says whether @var{group} is secondary or not.
-
-@item gnus-group-foreign-p
-@findex gnus-group-foreign-p
-Says whether @var{group} is foreign or not.
-
-@item group-group-find-parameter
-@findex group-group-find-parameter
-Returns the parameter list of @var{group}. If given a second parameter,
-returns the value of that parameter for @var{group}.
-
-@item gnus-group-set-parameter
-@findex gnus-group-set-parameter
-Takes three parameters; @var{group}, @var{parameter} and @var{value}.
-
-@item gnus-narrow-to-body
-@findex gnus-narrow-to-body
-Narrows the current buffer to the body of the article.
-
-@item gnus-check-backend-function
-@findex gnus-check-backend-function
-Takes two parameters, @var{function} and @var{group}. If the backend
-@var{group} comes from supports @var{function}, return non-@code{nil}.
-
-@lisp
-(gnus-check-backend-function "request-scan" "nnml:misc")
-@result{} t
-@end lisp
-
-@item gnus-read-method
-@findex gnus-read-method
-Prompts the user for a select method.
-
-@end table
-
-
-@node Backend Interface
-@subsection Backend Interface
-
-Gnus doesn't know anything about @sc{nntp}, spools, mail or virtual
-groups. It only knows how to talk to @dfn{virtual servers}. A virtual
-server is a @dfn{backend} and some @dfn{backend variables}. As examples
-of the first, we have @code{nntp}, @code{nnspool} and @code{nnmbox}. As
-examples of the latter we have @code{nntp-port-number} and
-@code{nnmbox-directory}.
-
-When Gnus asks for information from a backend---say @code{nntp}---on
-something, it will normally include a virtual server name in the
-function parameters. (If not, the backend should use the ``current''
-virtual server.) For instance, @code{nntp-request-list} takes a virtual
-server as its only (optional) parameter. If this virtual server hasn't
-been opened, the function should fail.
-
-Note that a virtual server name has no relation to some physical server
-name. Take this example:
-
-@lisp
-(nntp "odd-one"
- (nntp-address "ifi.uio.no")
- (nntp-port-number 4324))
-@end lisp
-
-Here the virtual server name is @samp{odd-one} while the name of
-the physical server is @samp{ifi.uio.no}.
-
-The backends should be able to switch between several virtual servers.
-The standard backends implement this by keeping an alist of virtual
-server environments that they pull down/push up when needed.
-
-There are two groups of interface functions: @dfn{required functions},
-which must be present, and @dfn{optional functions}, which Gnus will
-always check for presence before attempting to call 'em.
-
-All these functions are expected to return data in the buffer
-@code{nntp-server-buffer} (@samp{ *nntpd*}), which is somewhat
-unfortunately named, but we'll have to live with it. When I talk about
-@dfn{resulting data}, I always refer to the data in that buffer. When I
-talk about @dfn{return value}, I talk about the function value returned by
-the function call. Functions that fail should return @code{nil} as the
-return value.
-
-Some backends could be said to be @dfn{server-forming} backends, and
-some might be said not to be. The latter are backends that generally
-only operate on one group at a time, and have no concept of ``server''
--- they have a group, and they deliver info on that group and nothing
-more.
-
-In the examples and definitions I will refer to the imaginary backend
-@code{nnchoke}.
-
-@cindex @code{nnchoke}
-
-@menu
-* Required Backend Functions:: Functions that must be implemented.
-* Optional Backend Functions:: Functions that need not be implemented.
-* Error Messaging:: How to get messages and report errors.
-* Writing New Backends:: Extending old backends.
-* Hooking New Backends Into Gnus:: What has to be done on the Gnus end.
-* Mail-like Backends:: Some tips on mail backends.
-@end menu
-
-
-@node Required Backend Functions
-@subsubsection Required Backend Functions
-
-@table @code
-
-@item (nnchoke-retrieve-headers ARTICLES &optional GROUP SERVER FETCH-OLD)
-
-@var{articles} is either a range of article numbers or a list of
-@code{Message-ID}s. Current backends do not fully support either---only
-sequences (lists) of article numbers, and most backends do not support
-retrieval of @code{Message-ID}s. But they should try for both.
-
-The result data should either be HEADs or NOV lines, and the result
-value should either be @code{headers} or @code{nov} to reflect this.
-This might later be expanded to @code{various}, which will be a mixture
-of HEADs and NOV lines, but this is currently not supported by Gnus.
-
-If @var{fetch-old} is non-@code{nil} it says to try fetching "extra
-headers", in some meaning of the word. This is generally done by
-fetching (at most) @var{fetch-old} extra headers less than the smallest
-article number in @code{articles}, and filling the gaps as well. The
-presence of this parameter can be ignored if the backend finds it
-cumbersome to follow the request. If this is non-@code{nil} and not a
-number, do maximum fetches.
-
-Here's an example HEAD:
-
-@example
-221 1056 Article retrieved.
-Path: ifi.uio.no!sturles
-From: sturles@@ifi.uio.no (Sturle Sunde)
-Newsgroups: ifi.discussion
-Subject: Re: Something very droll
-Date: 27 Oct 1994 14:02:57 +0100
-Organization: Dept. of Informatics, University of Oslo, Norway
-Lines: 26
-Message-ID: <38o8e1$a0o@@holmenkollen.ifi.uio.no>
-References: <38jdmq$4qu@@visbur.ifi.uio.no>
-NNTP-Posting-Host: holmenkollen.ifi.uio.no
-.
-@end example
-
-So a @code{headers} return value would imply that there's a number of
-these in the data buffer.
-
-Here's a BNF definition of such a buffer:
-
-@example
-headers = *head
-head = error / valid-head
-error-message = [ "4" / "5" ] 2number " " <error message> eol
-valid-head = valid-message *header "." eol
-valid-message = "221 " <number> " Article retrieved." eol
-header = <text> eol
-@end example
-
-If the return value is @code{nov}, the data buffer should contain
-@dfn{network overview database} lines. These are basically fields
-separated by tabs.
-
-@example
-nov-buffer = *nov-line
-nov-line = 8*9 [ field <TAB> ] eol
-field = <text except TAB>
-@end example
-
-For a closer look at what should be in those fields,
-@pxref{Headers}.
-
-
-@item (nnchoke-open-server SERVER &optional DEFINITIONS)
-
-@var{server} is here the virtual server name. @var{definitions} is a
-list of @code{(VARIABLE VALUE)} pairs that define this virtual server.
-
-If the server can't be opened, no error should be signaled. The backend
-may then choose to refuse further attempts at connecting to this
-server. In fact, it should do so.
-
-If the server is opened already, this function should return a
-non-@code{nil} value. There should be no data returned.
-
-
-@item (nnchoke-close-server &optional SERVER)
-
-Close connection to @var{server} and free all resources connected
-to it. Return @code{nil} if the server couldn't be closed for some
-reason.
-
-There should be no data returned.
-
-
-@item (nnchoke-request-close)
-
-Close connection to all servers and free all resources that the backend
-have reserved. All buffers that have been created by that backend
-should be killed. (Not the @code{nntp-server-buffer}, though.) This
-function is generally only called when Gnus is shutting down.
-
-There should be no data returned.
-
-
-@item (nnchoke-server-opened &optional SERVER)
-
-If @var{server} is the current virtual server, and the connection to the
-physical server is alive, then this function should return a
-non-@code{nil} vlue. This function should under no circumstances
-attempt to reconnect to a server we have lost connection to.
-
-There should be no data returned.
-
-
-@item (nnchoke-status-message &optional SERVER)
-
-This function should return the last error message from @var{server}.
-
-There should be no data returned.
-
-
-@item (nnchoke-request-article ARTICLE &optional GROUP SERVER TO-BUFFER)
-
-The result data from this function should be the article specified by
-@var{article}. This might either be a @code{Message-ID} or a number.
-It is optional whether to implement retrieval by @code{Message-ID}, but
-it would be nice if that were possible.
-
-If @var{to-buffer} is non-@code{nil}, the result data should be returned
-in this buffer instead of the normal data buffer. This is to make it
-possible to avoid copying large amounts of data from one buffer to
-another, while Gnus mainly requests articles to be inserted directly
-into its article buffer.
-
-If it is at all possible, this function should return a cons cell where
-the @code{car} is the group name the article was fetched from, and the @code{cdr} is
-the article number. This will enable Gnus to find out what the real
-group and article numbers are when fetching articles by
-@code{Message-ID}. If this isn't possible, @code{t} should be returned
-on successful article retrieval.
-
-
-@item (nnchoke-request-group GROUP &optional SERVER FAST)
-
-Get data on @var{group}. This function also has the side effect of
-making @var{group} the current group.
-
-If @var{FAST}, don't bother to return useful data, just make @var{group}
-the current group.
-
-Here's an example of some result data and a definition of the same:
-
-@example
-211 56 1000 1059 ifi.discussion
-@end example
-
-The first number is the status, which should be 211. Next is the
-total number of articles in the group, the lowest article number, the
-highest article number, and finally the group name. Note that the total
-number of articles may be less than one might think while just
-considering the highest and lowest article numbers, but some articles
-may have been canceled. Gnus just discards the total-number, so
-whether one should take the bother to generate it properly (if that is a
-problem) is left as an exercise to the reader.
-
-@example
-group-status = [ error / info ] eol
-error = [ "4" / "5" ] 2<number> " " <Error message>
-info = "211 " 3* [ <number> " " ] <string>
-@end example
-
-
-@item (nnchoke-close-group GROUP &optional SERVER)
-
-Close @var{group} and free any resources connected to it. This will be
-a no-op on most backends.
-
-There should be no data returned.
-
-
-@item (nnchoke-request-list &optional SERVER)
-
-Return a list of all groups available on @var{server}. And that means
-@emph{all}.
-
-Here's an example from a server that only carries two groups:
-
-@example
-ifi.test 0000002200 0000002000 y
-ifi.discussion 3324 3300 n
-@end example
-
-On each line we have a group name, then the highest article number in
-that group, the lowest article number, and finally a flag.
-
-@example
-active-file = *active-line
-active-line = name " " <number> " " <number> " " flags eol
-name = <string>
-flags = "n" / "y" / "m" / "x" / "j" / "=" name
-@end example
-
-The flag says whether the group is read-only (@samp{n}), is moderated
-(@samp{m}), is dead (@samp{x}), is aliased to some other group
-(@samp{=other-group}) or none of the above (@samp{y}).
-
-
-@item (nnchoke-request-post &optional SERVER)
-
-This function should post the current buffer. It might return whether
-the posting was successful or not, but that's not required. If, for
-instance, the posting is done asynchronously, it has generally not been
-completed by the time this function concludes. In that case, this
-function should set up some kind of sentinel to beep the user loud and
-clear if the posting could not be completed.
-
-There should be no result data from this function.
-
-@end table
-
-
-@node Optional Backend Functions
-@subsubsection Optional Backend Functions
-
-@table @code
-
-@item (nnchoke-retrieve-groups GROUPS &optional SERVER)
-
-@var{groups} is a list of groups, and this function should request data
-on all those groups. How it does it is of no concern to Gnus, but it
-should attempt to do this in a speedy fashion.
-
-The return value of this function can be either @code{active} or
-@code{group}, which says what the format of the result data is. The
-former is in the same format as the data from
-@code{nnchoke-request-list}, while the latter is a buffer full of lines
-in the same format as @code{nnchoke-request-group} gives.
-
-@example
-group-buffer = *active-line / *group-status
-@end example
-
-
-@item (nnchoke-request-update-info GROUP INFO &optional SERVER)
-
-A Gnus group info (@pxref{Group Info}) is handed to the backend for
-alterations. This comes in handy if the backend really carries all the
-information (as is the case with virtual and imap groups). This
-function should destructively alter the info to suit its needs, and
-should return the (altered) group info.
-
-There should be no result data from this function.
-
-
-@item (nnchoke-request-type GROUP &optional ARTICLE)
-
-When the user issues commands for ``sending news'' (@kbd{F} in the
-summary buffer, for instance), Gnus has to know whether the article the
-user is following up on is news or mail. This function should return
-@code{news} if @var{article} in @var{group} is news, @code{mail} if it
-is mail and @code{unknown} if the type can't be decided. (The
-@var{article} parameter is necessary in @code{nnvirtual} groups which
-might very well combine mail groups and news groups.) Both @var{group}
-and @var{article} may be @code{nil}.
-
-There should be no result data from this function.
-
-
-@item (nnchoke-request-set-mark GROUP ACTION &optional SERVER)
-
-Set/remove/add marks on articles. Normally Gnus handles the article
-marks (such as read, ticked, expired etc) internally, and store them in
-@code{~/.newsrc.eld}. Some backends (such as IMAP) however carry all
-information about the articles on the server, so Gnus need to propagate
-the mark information to the server.
-
-ACTION is a list of mark setting requests, having this format:
-
-@example
-(RANGE ACTION MARK)
-@end example
-
-Range is a range of articles you wish to update marks on. Action is
-@code{set}, @code{add} or @code{del}, respectively used for removing all
-existing marks and setting them as specified, adding (preserving the
-marks not mentioned) mark and removing (preserving the marks not
-mentioned) marks. Mark is a list of marks; where each mark is a
-symbol. Currently used marks are @code{read}, @code{tick}, @code{reply},
-@code{expire}, @code{killed}, @code{dormant}, @code{save},
-@code{download} and @code{unsend}, but your backend should, if possible,
-not limit itself to theese.
-
-Given contradictory actions, the last action in the list should be the
-effective one. That is, if your action contains a request to add the
-@code{tick} mark on article 1 and, later in the list, a request to
-remove the mark on the same article, the mark should in fact be removed.
-
-An example action list:
-
-@example
-(((5 12 30) 'del '(tick))
- ((10 . 90) 'add '(read expire))
- ((92 94) 'del '(read)))
-@end example
-
-The function should return a range of articles it wasn't able to set the
-mark on (currently not used for anything).
-
-There should be no result data from this function.
-
-@item (nnchoke-request-update-mark GROUP ARTICLE MARK)
-
-If the user tries to set a mark that the backend doesn't like, this
-function may change the mark. Gnus will use whatever this function
-returns as the mark for @var{article} instead of the original
-@var{mark}. If the backend doesn't care, it must return the original
-@var{mark}, and not @code{nil} or any other type of garbage.
-
-The only use for this I can see is what @code{nnvirtual} does with
-it---if a component group is auto-expirable, marking an article as read
-in the virtual group should result in the article being marked as
-expirable.
-
-There should be no result data from this function.
-
-
-@item (nnchoke-request-scan &optional GROUP SERVER)
-
-This function may be called at any time (by Gnus or anything else) to
-request that the backend check for incoming articles, in one way or
-another. A mail backend will typically read the spool file or query the
-POP server when this function is invoked. The @var{group} doesn't have
-to be heeded---if the backend decides that it is too much work just
-scanning for a single group, it may do a total scan of all groups. It
-would be nice, however, to keep things local if that's practical.
-
-There should be no result data from this function.
-
-
-@item (nnchoke-request-group-description GROUP &optional SERVER)
-
-The result data from this function should be a description of
-@var{group}.
-
-@example
-description-line = name <TAB> description eol
-name = <string>
-description = <text>
-@end example
-
-@item (nnchoke-request-list-newsgroups &optional SERVER)
-
-The result data from this function should be the description of all
-groups available on the server.
-
-@example
-description-buffer = *description-line
-@end example
-
-
-@item (nnchoke-request-newgroups DATE &optional SERVER)
-
-The result data from this function should be all groups that were
-created after @samp{date}, which is in normal human-readable date
-format. The data should be in the active buffer format.
-
-
-@item (nnchoke-request-create-group GROUP &optional SERVER)
-
-This function should create an empty group with name @var{group}.
-
-There should be no return data.
-
-
-@item (nnchoke-request-expire-articles ARTICLES &optional GROUP SERVER FORCE)
-
-This function should run the expiry process on all articles in the
-@var{articles} range (which is currently a simple list of article
-numbers.) It is left up to the backend to decide how old articles
-should be before they are removed by this function. If @var{force} is
-non-@code{nil}, all @var{articles} should be deleted, no matter how new
-they are.
-
-This function should return a list of articles that it did not/was not
-able to delete.
-
-There should be no result data returned.
-
-
-@item (nnchoke-request-move-article ARTICLE GROUP SERVER ACCEPT-FORM
-&optional LAST)
-
-This function should move @var{article} (which is a number) from
-@var{group} by calling @var{accept-form}.
-
-This function should ready the article in question for moving by
-removing any header lines it has added to the article, and generally
-should ``tidy up'' the article. Then it should @code{eval}
-@var{accept-form} in the buffer where the ``tidy'' article is. This
-will do the actual copying. If this @code{eval} returns a
-non-@code{nil} value, the article should be removed.
-
-If @var{last} is @code{nil}, that means that there is a high likelihood
-that there will be more requests issued shortly, so that allows some
-optimizations.
-
-The function should return a cons where the @code{car} is the group name and
-the @code{cdr} is the article number that the article was entered as.
-
-There should be no data returned.
-
-
-@item (nnchoke-request-accept-article GROUP &optional SERVER LAST)
-
-This function takes the current buffer and inserts it into @var{group}.
-If @var{last} in @code{nil}, that means that there will be more calls to
-this function in short order.
-
-The function should return a cons where the @code{car} is the group name and
-the @code{cdr} is the article number that the article was entered as.
-
-There should be no data returned.
-
-
-@item (nnchoke-request-replace-article ARTICLE GROUP BUFFER)
-
-This function should remove @var{article} (which is a number) from
-@var{group} and insert @var{buffer} there instead.
-
-There should be no data returned.
-
-
-@item (nnchoke-request-delete-group GROUP FORCE &optional SERVER)
-
-This function should delete @var{group}. If @var{force}, it should
-really delete all the articles in the group, and then delete the group
-itself. (If there is such a thing as ``the group itself''.)
-
-There should be no data returned.
-
-
-@item (nnchoke-request-rename-group GROUP NEW-NAME &optional SERVER)
-
-This function should rename @var{group} into @var{new-name}. All
-articles in @var{group} should move to @var{new-name}.
-
-There should be no data returned.
-
-@end table
-
-
-@node Error Messaging
-@subsubsection Error Messaging
-
-@findex nnheader-report
-@findex nnheader-get-report
-The backends should use the function @code{nnheader-report} to report
-error conditions---they should not raise errors when they aren't able to
-perform a request. The first argument to this function is the backend
-symbol, and the rest are interpreted as arguments to @code{format} if
-there are multiple of them, or just a string if there is one of them.
-This function must always returns @code{nil}.
-
-@lisp
-(nnheader-report 'nnchoke "You did something totally bogus")
-
-(nnheader-report 'nnchoke "Could not request group %s" group)
-@end lisp
-
-Gnus, in turn, will call @code{nnheader-get-report} when it gets a
-@code{nil} back from a server, and this function returns the most
-recently reported message for the backend in question. This function
-takes one argument---the server symbol.
-
-Internally, these functions access @var{backend}@code{-status-string},
-so the @code{nnchoke} backend will have its error message stored in
-@code{nnchoke-status-string}.
-
-
-@node Writing New Backends
-@subsubsection Writing New Backends
-
-Many backends are quite similar. @code{nnml} is just like
-@code{nnspool}, but it allows you to edit the articles on the server.
-@code{nnmh} is just like @code{nnml}, but it doesn't use an active file,
-and it doesn't maintain overview databases. @code{nndir} is just like
-@code{nnml}, but it has no concept of ``groups'', and it doesn't allow
-editing articles.
-
-It would make sense if it were possible to ``inherit'' functions from
-backends when writing new backends. And, indeed, you can do that if you
-want to. (You don't have to if you don't want to, of course.)
-
-All the backends declare their public variables and functions by using a
-package called @code{nnoo}.
-
-To inherit functions from other backends (and allow other backends to
-inherit functions from the current backend), you should use the
-following macros:
-
-@table @code
-
-@item nnoo-declare
-This macro declares the first parameter to be a child of the subsequent
-parameters. For instance:
-
-@lisp
-(nnoo-declare nndir
- nnml nnmh)
-@end lisp
-
-@code{nndir} has declared here that it intends to inherit functions from
-both @code{nnml} and @code{nnmh}.
-
-@item defvoo
-This macro is equivalent to @code{defvar}, but registers the variable as
-a public server variable. Most state-oriented variables should be
-declared with @code{defvoo} instead of @code{defvar}.
-
-In addition to the normal @code{defvar} parameters, it takes a list of
-variables in the parent backends to map the variable to when executing
-a function in those backends.
-
-@lisp
-(defvoo nndir-directory nil
- "Where nndir will look for groups."
- nnml-current-directory nnmh-current-directory)
-@end lisp
-
-This means that @code{nnml-current-directory} will be set to
-@code{nndir-directory} when an @code{nnml} function is called on behalf
-of @code{nndir}. (The same with @code{nnmh}.)
-
-@item nnoo-define-basics
-This macro defines some common functions that almost all backends should
-have.
-
-@example
-(nnoo-define-basics nndir)
-@end example
-
-@item deffoo
-This macro is just like @code{defun} and takes the same parameters. In
-addition to doing the normal @code{defun} things, it registers the
-function as being public so that other backends can inherit it.
-
-@item nnoo-map-functions
-This macro allows mapping of functions from the current backend to
-functions from the parent backends.
-
-@example
-(nnoo-map-functions nndir
- (nnml-retrieve-headers 0 nndir-current-group 0 0)
- (nnmh-request-article 0 nndir-current-group 0 0))
-@end example
-
-This means that when @code{nndir-retrieve-headers} is called, the first,
-third, and fourth parameters will be passed on to
-@code{nnml-retrieve-headers}, while the second parameter is set to the
-value of @code{nndir-current-group}.
-
-@item nnoo-import
-This macro allows importing functions from backends. It should be the
-last thing in the source file, since it will only define functions that
-haven't already been defined.
-
-@example
-(nnoo-import nndir
- (nnmh
- nnmh-request-list
- nnmh-request-newgroups)
- (nnml))
-@end example
-
-This means that calls to @code{nndir-request-list} should just be passed
-on to @code{nnmh-request-list}, while all public functions from
-@code{nnml} that haven't been defined in @code{nndir} yet should be
-defined now.
-
-@end table
-
-Below is a slightly shortened version of the @code{nndir} backend.
-
-@lisp
-;;; nndir.el --- single directory newsgroup access for Gnus
-;; Copyright (C) 1995,96 Free Software Foundation, Inc.
-
-;;; Code:
-
-(require 'nnheader)
-(require 'nnmh)
-(require 'nnml)
-(require 'nnoo)
-(eval-when-compile (require 'cl))
-
-(nnoo-declare nndir
- nnml nnmh)
-
-(defvoo nndir-directory nil
- "Where nndir will look for groups."
- nnml-current-directory nnmh-current-directory)
-
-(defvoo nndir-nov-is-evil nil
- "*Non-nil means that nndir will never retrieve NOV headers."
- nnml-nov-is-evil)
-
-(defvoo nndir-current-group "" nil nnml-current-group nnmh-current-group)
-(defvoo nndir-top-directory nil nil nnml-directory nnmh-directory)
-(defvoo nndir-get-new-mail nil nil nnml-get-new-mail nnmh-get-new-mail)
-
-(defvoo nndir-status-string "" nil nnmh-status-string)
-(defconst nndir-version "nndir 1.0")
-
-;;; Interface functions.
-
-(nnoo-define-basics nndir)
-
-(deffoo nndir-open-server (server &optional defs)
- (setq nndir-directory
- (or (cadr (assq 'nndir-directory defs))
- server))
- (unless (assq 'nndir-directory defs)
- (push `(nndir-directory ,server) defs))
- (push `(nndir-current-group
- ,(file-name-nondirectory (directory-file-name nndir-directory)))
- defs)
- (push `(nndir-top-directory
- ,(file-name-directory (directory-file-name nndir-directory)))
- defs)
- (nnoo-change-server 'nndir server defs))
-
-(nnoo-map-functions nndir
- (nnml-retrieve-headers 0 nndir-current-group 0 0)
- (nnmh-request-article 0 nndir-current-group 0 0)
- (nnmh-request-group nndir-current-group 0 0)
- (nnmh-close-group nndir-current-group 0))
-
-(nnoo-import nndir
- (nnmh
- nnmh-status-message
- nnmh-request-list
- nnmh-request-newgroups))
-
-(provide 'nndir)
-@end lisp
-
-
-@node Hooking New Backends Into Gnus
-@subsubsection Hooking New Backends Into Gnus
-
-@vindex gnus-valid-select-methods
-Having Gnus start using your new backend is rather easy---you just
-declare it with the @code{gnus-declare-backend} functions. This will
-enter the backend into the @code{gnus-valid-select-methods} variable.
-
-@code{gnus-declare-backend} takes two parameters---the backend name and
-an arbitrary number of @dfn{abilities}.
-
-Here's an example:
-
-@lisp
-(gnus-declare-backend "nnchoke" 'mail 'respool 'address)
-@end lisp
-
-The abilities can be:
-
-@table @code
-@item mail
-This is a mailish backend---followups should (probably) go via mail.
-@item post
-This is a newsish backend---followups should (probably) go via news.
-@item post-mail
-This backend supports both mail and news.
-@item none
-This is neither a post nor mail backend---it's something completely
-different.
-@item respool
-It supports respooling---or rather, it is able to modify its source
-articles and groups.
-@item address
-The name of the server should be in the virtual server name. This is
-true for almost all backends.
-@item prompt-address
-The user should be prompted for an address when doing commands like
-@kbd{B} in the group buffer. This is true for backends like
-@code{nntp}, but not @code{nnmbox}, for instance.
-@end table
-
-
-@node Mail-like Backends
-@subsubsection Mail-like Backends
-
-One of the things that separate the mail backends from the rest of the
-backends is the heavy dependence by the mail backends on common
-functions in @file{nnmail.el}. For instance, here's the definition of
-@code{nnml-request-scan}:
-
-@lisp
-(deffoo nnml-request-scan (&optional group server)
- (setq nnml-article-file-alist nil)
- (nnmail-get-new-mail 'nnml 'nnml-save-nov nnml-directory group))
-@end lisp
-
-It simply calls @code{nnmail-get-new-mail} with a few parameters,
-and @code{nnmail} takes care of all the moving and splitting of the
-mail.
-
-This function takes four parameters.
-
-@table @var
-@item method
-This should be a symbol to designate which backend is responsible for
-the call.
-
-@item exit-function
-This function should be called after the splitting has been performed.
-
-@item temp-directory
-Where the temporary files should be stored.
-
-@item group
-This optional argument should be a group name if the splitting is to be
-performed for one group only.
-@end table
-
-@code{nnmail-get-new-mail} will call @var{backend}@code{-save-mail} to
-save each article. @var{backend}@code{-active-number} will be called to
-find the article number assigned to this article.
-
-The function also uses the following variables:
-@var{backend}@code{-get-new-mail} (to see whether to get new mail for
-this backend); and @var{backend}@code{-group-alist} and
-@var{backend}@code{-active-file} to generate the new active file.
-@var{backend}@code{-group-alist} should be a group-active alist, like
-this:
-
-@example
-(("a-group" (1 . 10))
- ("some-group" (34 . 39)))
-@end example
-
-
-@node Score File Syntax
-@subsection Score File Syntax
-
-Score files are meant to be easily parseable, but yet extremely
-mallable. It was decided that something that had the same read syntax
-as an Emacs Lisp list would fit that spec.
-
-Here's a typical score file:
-
-@lisp
-(("summary"
- ("win95" -10000 nil s)
- ("Gnus"))
- ("from"
- ("Lars" -1000))
- (mark -100))
-@end lisp
-
-BNF definition of a score file:
-
-@example
-score-file = "" / "(" *element ")"
-element = rule / atom
-rule = string-rule / number-rule / date-rule
-string-rule = "(" quote string-header quote space *string-match ")"
-number-rule = "(" quote number-header quote space *number-match ")"
-date-rule = "(" quote date-header quote space *date-match ")"
-quote = <ascii 34>
-string-header = "subject" / "from" / "references" / "message-id" /
- "xref" / "body" / "head" / "all" / "followup"
-number-header = "lines" / "chars"
-date-header = "date"
-string-match = "(" quote <string> quote [ "" / [ space score [ "" /
- space date [ "" / [ space string-match-t ] ] ] ] ] ")"
-score = "nil" / <integer>
-date = "nil" / <natural number>
-string-match-t = "nil" / "s" / "substring" / "S" / "Substring" /
- "r" / "regex" / "R" / "Regex" /
- "e" / "exact" / "E" / "Exact" /
- "f" / "fuzzy" / "F" / "Fuzzy"
-number-match = "(" <integer> [ "" / [ space score [ "" /
- space date [ "" / [ space number-match-t ] ] ] ] ] ")"
-number-match-t = "nil" / "=" / "<" / ">" / ">=" / "<="
-date-match = "(" quote <string> quote [ "" / [ space score [ "" /
- space date [ "" / [ space date-match-t ] ] ] ] ")"
-date-match-t = "nil" / "at" / "before" / "after"
-atom = "(" [ required-atom / optional-atom ] ")"
-required-atom = mark / expunge / mark-and-expunge / files /
- exclude-files / read-only / touched
-optional-atom = adapt / local / eval
-mark = "mark" space nil-or-number
-nil-or-number = "nil" / <integer>
-expunge = "expunge" space nil-or-number
-mark-and-expunge = "mark-and-expunge" space nil-or-number
-files = "files" *[ space <string> ]
-exclude-files = "exclude-files" *[ space <string> ]
-read-only = "read-only" [ space "nil" / space "t" ]
-adapt = "adapt" [ space "ignore" / space "t" / space adapt-rule ]
-adapt-rule = "(" *[ <string> *[ "(" <string> <integer> ")" ] ")"
-local = "local" *[ space "(" <string> space <form> ")" ]
-eval = "eval" space <form>
-space = *[ " " / <TAB> / <NEWLINE> ]
-@end example
-
-Any unrecognized elements in a score file should be ignored, but not
-discarded.
-
-As you can see, white space is needed, but the type and amount of white
-space is irrelevant. This means that formatting of the score file is
-left up to the programmer---if it's simpler to just spew it all out on
-one looong line, then that's ok.
-
-The meaning of the various atoms are explained elsewhere in this
-manual (@pxref{Score File Format}).
-
-
-@node Headers
-@subsection Headers
-
-Internally Gnus uses a format for storing article headers that
-corresponds to the @sc{nov} format in a mysterious fashion. One could
-almost suspect that the author looked at the @sc{nov} specification and
-just shamelessly @emph{stole} the entire thing, and one would be right.
-
-@dfn{Header} is a severely overloaded term. ``Header'' is used in
-RFC1036 to talk about lines in the head of an article (e.g.,
-@code{From}). It is used by many people as a synonym for
-``head''---``the header and the body''. (That should be avoided, in my
-opinion.) And Gnus uses a format internally that it calls ``header'',
-which is what I'm talking about here. This is a 9-element vector,
-basically, with each header (ouch) having one slot.
-
-These slots are, in order: @code{number}, @code{subject}, @code{from},
-@code{date}, @code{id}, @code{references}, @code{chars}, @code{lines},
-@code{xref}, and @code{extra}. There are macros for accessing and
-setting these slots---they all have predictable names beginning with
-@code{mail-header-} and @code{mail-header-set-}, respectively.
-
-All these slots contain strings, except the @code{extra} slot, which
-contains an alist of header/value pairs (@pxref{To From Newsgroups}).
-
-
-@node Ranges
-@subsection Ranges
-
-@sc{gnus} introduced a concept that I found so useful that I've started
-using it a lot and have elaborated on it greatly.
-
-The question is simple: If you have a large amount of objects that are
-identified by numbers (say, articles, to take a @emph{wild} example)
-that you want to qualify as being ``included'', a normal sequence isn't
-very useful. (A 200,000 length sequence is a bit long-winded.)
-
-The solution is as simple as the question: You just collapse the
-sequence.
-
-@example
-(1 2 3 4 5 6 10 11 12)
-@end example
-
-is transformed into
-
-@example
-((1 . 6) (10 . 12))
-@end example
-
-To avoid having those nasty @samp{(13 . 13)} elements to denote a
-lonesome object, a @samp{13} is a valid element:
-
-@example
-((1 . 6) 7 (10 . 12))
-@end example
-
-This means that comparing two ranges to find out whether they are equal
-is slightly tricky:
-
-@example
-((1 . 5) 7 8 (10 . 12))
-@end example
-
-and
-
-@example
-((1 . 5) (7 . 8) (10 . 12))
-@end example
-
-are equal. In fact, any non-descending list is a range:
-
-@example
-(1 2 3 4 5)
-@end example
-
-is a perfectly valid range, although a pretty long-winded one. This is
-also valid:
-
-@example
-(1 . 5)
-@end example
-
-and is equal to the previous range.
-
-Here's a BNF definition of ranges. Of course, one must remember the
-semantic requirement that the numbers are non-descending. (Any number
-of repetition of the same number is allowed, but apt to disappear in
-range handling.)
-
-@example
-range = simple-range / normal-range
-simple-range = "(" number " . " number ")"
-normal-range = "(" start-contents ")"
-contents = "" / simple-range *[ " " contents ] /
- number *[ " " contents ]
-@end example
-
-Gnus currently uses ranges to keep track of read articles and article
-marks. I plan on implementing a number of range operators in C if The
-Powers That Be are willing to let me. (I haven't asked yet, because I
-need to do some more thinking on what operators I need to make life
-totally range-based without ever having to convert back to normal
-sequences.)
-
-
-@node Group Info
-@subsection Group Info
-
-Gnus stores all permanent info on groups in a @dfn{group info} list.
-This list is from three to six elements (or more) long and exhaustively
-describes the group.
-
-Here are two example group infos; one is a very simple group while the
-second is a more complex one:
-
-@example
-("no.group" 5 ((1 . 54324)))
-
-("nnml:my.mail" 3 ((1 . 5) 9 (20 . 55))
- ((tick (15 . 19)) (replied 3 6 (19 . 3)))
- (nnml "")
- ((auto-expire . t) (to-address . "ding@@gnus.org")))
-@end example
-
-The first element is the @dfn{group name}---as Gnus knows the group,
-anyway. The second element is the @dfn{subscription level}, which
-normally is a small integer. (It can also be the @dfn{rank}, which is a
-cons cell where the @code{car} is the level and the @code{cdr} is the
-score.) The third element is a list of ranges of read articles. The
-fourth element is a list of lists of article marks of various kinds.
-The fifth element is the select method (or virtual server, if you like).
-The sixth element is a list of @dfn{group parameters}, which is what
-this section is about.
-
-Any of the last three elements may be missing if they are not required.
-In fact, the vast majority of groups will normally only have the first
-three elements, which saves quite a lot of cons cells.
-
-Here's a BNF definition of the group info format:
-
-@example
-info = "(" group space ralevel space read
- [ "" / [ space marks-list [ "" / [ space method [ "" /
- space parameters ] ] ] ] ] ")"
-group = quote <string> quote
-ralevel = rank / level
-level = <integer in the range of 1 to inf>
-rank = "(" level "." score ")"
-score = <integer in the range of 1 to inf>
-read = range
-marks-lists = nil / "(" *marks ")"
-marks = "(" <string> range ")"
-method = "(" <string> *elisp-forms ")"
-parameters = "(" *elisp-forms ")"
-@end example
-
-Actually that @samp{marks} rule is a fib. A @samp{marks} is a
-@samp{<string>} consed on to a @samp{range}, but that's a bitch to say
-in pseudo-BNF.
-
-If you have a Gnus info and want to access the elements, Gnus offers a
-series of macros for getting/setting these elements.
-
-@table @code
-@item gnus-info-group
-@itemx gnus-info-set-group
-@findex gnus-info-group
-@findex gnus-info-set-group
-Get/set the group name.
-
-@item gnus-info-rank
-@itemx gnus-info-set-rank
-@findex gnus-info-rank
-@findex gnus-info-set-rank
-Get/set the group rank (@pxref{Group Score}).
-
-@item gnus-info-level
-@itemx gnus-info-set-level
-@findex gnus-info-level
-@findex gnus-info-set-level
-Get/set the group level.
-
-@item gnus-info-score
-@itemx gnus-info-set-score
-@findex gnus-info-score
-@findex gnus-info-set-score
-Get/set the group score (@pxref{Group Score}).
-
-@item gnus-info-read
-@itemx gnus-info-set-read
-@findex gnus-info-read
-@findex gnus-info-set-read
-Get/set the ranges of read articles.
-
-@item gnus-info-marks
-@itemx gnus-info-set-marks
-@findex gnus-info-marks
-@findex gnus-info-set-marks
-Get/set the lists of ranges of marked articles.
-
-@item gnus-info-method
-@itemx gnus-info-set-method
-@findex gnus-info-method
-@findex gnus-info-set-method
-Get/set the group select method.
-
-@item gnus-info-params
-@itemx gnus-info-set-params
-@findex gnus-info-params
-@findex gnus-info-set-params
-Get/set the group parameters.
-@end table
-
-All the getter functions take one parameter---the info list. The setter
-functions take two parameters---the info list and the new value.
-
-The last three elements in the group info aren't mandatory, so it may be
-necessary to extend the group info before setting the element. If this
-is necessary, you can just pass on a non-@code{nil} third parameter to
-the three final setter functions to have this happen automatically.
-
-
-@node Extended Interactive
-@subsection Extended Interactive
-@cindex interactive
-@findex gnus-interactive
-
-Gnus extends the standard Emacs @code{interactive} specification
-slightly to allow easy use of the symbolic prefix (@pxref{Symbolic
-Prefixes}). Here's an example of how this is used:
-
-@lisp
-(defun gnus-summary-increase-score (&optional score symp)
- (interactive (gnus-interactive "P\ny"))
- ...
- )
-@end lisp
-
-The best thing to do would have been to implement
-@code{gnus-interactive} as a macro which would have returned an
-@code{interactive} form, but this isn't possible since Emacs checks
-whether a function is interactive or not by simply doing an @code{assq}
-on the lambda form. So, instead we have @code{gnus-interactive}
-function that takes a string and returns values that are usable to
-@code{interactive}.
-
-This function accepts (almost) all normal @code{interactive} specs, but
-adds a few more.
-
-@table @samp
-@item y
-@vindex gnus-current-prefix-symbol
-The current symbolic prefix---the @code{gnus-current-prefix-symbol}
-variable.
-
-@item Y
-@vindex gnus-current-prefix-symbols
-A list of the current symbolic prefixes---the
-@code{gnus-current-prefix-symbol} variable.
-
-@item A
-The current article number---the @code{gnus-summary-article-number}
-function.
-
-@item H
-The current article header---the @code{gnus-summary-article-header}
-function.
-
-@item g
-The current group name---the @code{gnus-group-group-name}
-function.
-
-@end table
-
-
-@node Emacs/XEmacs Code
-@subsection Emacs/XEmacs Code
-@cindex XEmacs
-@cindex Emacsen
-
-While Gnus runs under Emacs, XEmacs and Mule, I decided that one of the
-platforms must be the primary one. I chose Emacs. Not because I don't
-like XEmacs or Mule, but because it comes first alphabetically.
-
-This means that Gnus will byte-compile under Emacs with nary a warning,
-while XEmacs will pump out gigabytes of warnings while byte-compiling.
-As I use byte-compilation warnings to help me root out trivial errors in
-Gnus, that's very useful.
-
-I've also consistently used Emacs function interfaces, but have used
-Gnusey aliases for the functions. To take an example: Emacs defines a
-@code{run-at-time} function while XEmacs defines a @code{start-itimer}
-function. I then define a function called @code{gnus-run-at-time} that
-takes the same parameters as the Emacs @code{run-at-time}. When running
-Gnus under Emacs, the former function is just an alias for the latter.
-However, when running under XEmacs, the former is an alias for the
-following function:
-
-@lisp
-(defun gnus-xmas-run-at-time (time repeat function &rest args)
- (start-itimer
- "gnus-run-at-time"
- `(lambda ()
- (,function ,@@args))
- time repeat))
-@end lisp
-
-This sort of thing has been done for bunches of functions. Gnus does
-not redefine any native Emacs functions while running under XEmacs---it
-does this @code{defalias} thing with Gnus equivalents instead. Cleaner
-all over.
-
-In the cases where the XEmacs function interface was obviously cleaner,
-I used it instead. For example @code{gnus-region-active-p} is an alias
-for @code{region-active-p} in XEmacs, whereas in Emacs it is a function.
-
-Of course, I could have chosen XEmacs as my native platform and done
-mapping functions the other way around. But I didn't. The performance
-hit these indirections impose on Gnus under XEmacs should be slight.
-
-
-@node Various File Formats
-@subsection Various File Formats
-
-@menu
-* Active File Format:: Information on articles and groups available.
-* Newsgroups File Format:: Group descriptions.
-@end menu
-
-
-@node Active File Format
-@subsubsection Active File Format
-
-The active file lists all groups available on the server in
-question. It also lists the highest and lowest current article numbers
-in each group.
-
-Here's an excerpt from a typical active file:
-
-@example
-soc.motss 296030 293865 y
-alt.binaries.pictures.fractals 3922 3913 n
-comp.sources.unix 1605 1593 m
-comp.binaries.ibm.pc 5097 5089 y
-no.general 1000 900 y
-@end example
-
-Here's a pseudo-BNF definition of this file:
-
-@example
-active = *group-line
-group-line = group space high-number space low-number space flag <NEWLINE>
-group = <non-white-space string>
-space = " "
-high-number = <non-negative integer>
-low-number = <positive integer>
-flag = "y" / "n" / "m" / "j" / "x" / "=" group
-@end example
-
-For a full description of this file, see the manual pages for
-@samp{innd}, in particular @samp{active(5)}.
-
-
-@node Newsgroups File Format
-@subsubsection Newsgroups File Format
-
-The newsgroups file lists groups along with their descriptions. Not all
-groups on the server have to be listed, and not all groups in the file
-have to exist on the server. The file is meant purely as information to
-the user.
-
-The format is quite simple; a group name, a tab, and the description.
-Here's the definition:
-
-@example
-newsgroups = *line
-line = group tab description <NEWLINE>
-group = <non-white-space string>
-tab = <TAB>
-description = <string>
-@end example
-
-
-@page
-@node Emacs for Heathens
-@section Emacs for Heathens
-
-Believe it or not, but some people who use Gnus haven't really used
-Emacs much before they embarked on their journey on the Gnus Love Boat.
-If you are one of those unfortunates whom ``@kbd{M-C-a}'', ``kill the
-region'', and ``set @code{gnus-flargblossen} to an alist where the key
-is a regexp that is used for matching on the group name'' are magical
-phrases with little or no meaning, then this appendix is for you. If
-you are already familiar with Emacs, just ignore this and go fondle your
-cat instead.
-
-@menu
-* Keystrokes:: Entering text and executing commands.
-* Emacs Lisp:: The built-in Emacs programming language.
-@end menu
-
-
-@node Keystrokes
-@subsection Keystrokes
-
-@itemize @bullet
-@item
-Q: What is an experienced Emacs user?
-
-@item
-A: A person who wishes that the terminal had pedals.
-@end itemize
-
-Yes, when you use Emacs, you are apt to use the control key, the shift
-key and the meta key a lot. This is very annoying to some people
-(notably @code{vi}le users), and the rest of us just love the hell out
-of it. Just give up and submit. Emacs really does stand for
-``Escape-Meta-Alt-Control-Shift'', and not ``Editing Macros'', as you
-may have heard from other disreputable sources (like the Emacs author).
-
-The shift keys are normally located near your pinky fingers, and are
-normally used to get capital letters and stuff. You probably use it all
-the time. The control key is normally marked ``CTRL'' or something like
-that. The meta key is, funnily enough, never marked as such on any
-keyboard. The one I'm currently at has a key that's marked ``Alt'',
-which is the meta key on this keyboard. It's usually located somewhere
-to the left hand side of the keyboard, usually on the bottom row.
-
-Now, us Emacs people don't say ``press the meta-control-m key'',
-because that's just too inconvenient. We say ``press the @kbd{M-C-m}
-key''. @kbd{M-} is the prefix that means ``meta'' and ``C-'' is the
-prefix that means ``control''. So ``press @kbd{C-k}'' means ``press
-down the control key, and hold it down while you press @kbd{k}''.
-``Press @kbd{M-C-k}'' means ``press down and hold down the meta key and
-the control key and then press @kbd{k}''. Simple, ay?
-
-This is somewhat complicated by the fact that not all keyboards have a
-meta key. In that case you can use the ``escape'' key. Then @kbd{M-k}
-means ``press escape, release escape, press @kbd{k}''. That's much more
-work than if you have a meta key, so if that's the case, I respectfully
-suggest you get a real keyboard with a meta key. You can't live without
-it.
-
-
-
-@node Emacs Lisp
-@subsection Emacs Lisp
-
-Emacs is the King of Editors because it's really a Lisp interpreter.
-Each and every key you tap runs some Emacs Lisp code snippet, and since
-Emacs Lisp is an interpreted language, that means that you can configure
-any key to run any arbitrary code. You just, like, do it.
-
-Gnus is written in Emacs Lisp, and is run as a bunch of interpreted
-functions. (These are byte-compiled for speed, but it's still
-interpreted.) If you decide that you don't like the way Gnus does
-certain things, it's trivial to have it do something a different way.
-(Well, at least if you know how to write Lisp code.) However, that's
-beyond the scope of this manual, so we are simply going to talk about
-some common constructs that you normally use in your @file{.emacs} file
-to customize Gnus.
-
-If you want to set the variable @code{gnus-florgbnize} to four (4), you
-write the following:
-
-@lisp
-(setq gnus-florgbnize 4)
-@end lisp
-
-This function (really ``special form'') @code{setq} is the one that can
-set a variable to some value. This is really all you need to know. Now
-you can go and fill your @code{.emacs} file with lots of these to change
-how Gnus works.
-
-If you have put that thing in your @code{.emacs} file, it will be read
-and @code{eval}ed (which is lisp-ese for ``run'') the next time you
-start Emacs. If you want to change the variable right away, simply say
-@kbd{C-x C-e} after the closing parenthesis. That will @code{eval} the
-previous ``form'', which is a simple @code{setq} statement here.
-
-Go ahead---just try it, if you're located at your Emacs. After you
-@kbd{C-x C-e}, you will see @samp{4} appear in the echo area, which
-is the return value of the form you @code{eval}ed.
-
-Some pitfalls:
-
-If the manual says ``set @code{gnus-read-active-file} to @code{some}'',
-that means:
-
-@lisp
-(setq gnus-read-active-file 'some)
-@end lisp
-
-On the other hand, if the manual says ``set @code{gnus-nntp-server} to
-@samp{nntp.ifi.uio.no}'', that means:
-
-@lisp
-(setq gnus-nntp-server "nntp.ifi.uio.no")
-@end lisp
-
-So be careful not to mix up strings (the latter) with symbols (the
-former). The manual is unambiguous, but it can be confusing.
-
-@page
-@include gnus-faq.texi
-
-@node Index
-@chapter Index
-@printindex cp
-
-@node Key Index
-@chapter Key Index
-@printindex ky
-
-@summarycontents
-@contents
-@bye
-
-@iftex
-@iflatex
-\end{document}
-@end iflatex
-@end iftex
-
-@c End:
-
projects / elisp / gnus.git- / commitdiff