From: yamaoka Date: Mon, 14 Jun 1999 01:39:48 +0000 (+0000) Subject: Sync up with Pterodactyl Gnus v0.86. X-Git-Tag: t-gnus-6_10_065-00~3 X-Git-Url: http://git.chise.org/gitweb/?a=commitdiff_plain;h=273493b6af346785f67a96ff7645c2f022393f60;p=elisp%2Fgnus.git- Sync up with Pterodactyl Gnus v0.86. --- diff --git a/texi/ChangeLog b/texi/ChangeLog index 13df68b..2d6386b 100644 --- a/texi/ChangeLog +++ b/texi/ChangeLog @@ -1,3 +1,23 @@ +1999-06-13 02:29:22 Lars Magne Ingebrigtsen + + * gnus.texi (MIME Commands): Addition. + (Article Miscellania): New. + (Customizing Articles): Addition. + +1999-06-12 00:13:25 Lars Magne Ingebrigtsen + + * gnus.texi (Comparing Mail Backends): Slight edits. + +1999-06-12 00:13:20 Karl Kleinpaste + + * gnus.texi (Comparing Mail Backends): New. + +1999-06-11 21:47:22 Lars Magne Ingebrigtsen + + * gnus.texi (Group Score): Doc fix. + (The Active File): Addition. + (Document Groups): Addition. + 1999-04-18 Didier Verna * gnus.texi (Article treatment): document the new variable diff --git a/texi/gnus-ja.texi b/texi/gnus-ja.texi index 328783e..80b33dc 100644 --- a/texi/gnus-ja.texi +++ b/texi/gnus-ja.texi @@ -1,4 +1,4 @@ -\input texinfo @c -*-texinfo-*- +@c \input texinfo @c -*-texinfo-*- @setfilename gnus-ja @settitle Semi-gnus 6.10.064 Manual @@ -1039,6 +1039,10 @@ Gnus $B$O5/F0$7$?$H$-$d!"pJs$rF@$h$&$H$7$^$9!#$=$7$F!"$3$l$O$"$^$jB.$/$"$j$^$;$s!#$b$7$=(B $B$l$,(B @code{some} $B$G(B @sc{nntp} $B%5!<%P!<$r;H$C$F$$$k$H$-$O!"(Bgnus $B$O$G$-$k(B @@ -1954,9 +1958,9 @@ kiboze $B%0%k!<%W$r:n@.$7$^$9!#%W%m%s%W%H$GL>A0$H!"(Bkiboze $B%0%k!<%W$K!V4^$ $B%$%kL>$H%U%!%$%k%?%$%W$r%W%m%s%W%H$GF~NO$7$^$9!#8=:_%5%]!<%H$5$l$F$$$k%U%!(B $B%$%k%?%$%W$O!"(B@code{babyl}, @code{mbox}, @code{digest}, @code{mmdf}, @code{news}, @code{rnews}, @code{clari-briefs}, @code{rfc934}, -@code{rfc822-forward}, @code{forward} $B$G$9!#@\F,<-$J$7$G$3$N%3%^(B -$B%s%I$r #1}} \newcommand{\gnusbullet}{{${\bullet}$}} \newcommand{\gnusdollar}{\$} @@ -999,6 +1000,10 @@ support the @code{LIST ACTIVE group} command), on others this isn't fast at all. In any case, @code{some} should be faster than @code{nil}, and is certainly faster than @code{t} over slow lines. +Some news servers (Leafnode and old versions of INN, for instance) do +not support the @code{LIST ACTIVE group}. For these servers, @code{nil} +is probably the most effficient value for this variable. + If this variable is @code{nil}, gnus will ask for group info in total lock-step, which isn't very fast. If it is @code{some} and you use an @sc{nntp} server, gnus will pump out commands as fast as it can, and @@ -1006,6 +1011,9 @@ read all the replies in one swoop. This will normally result in better performance, but if the server does not support the aforementioned @code{LIST ACTIVE group} command, this isn't very nice to the server. +If you think that starting up Gnus takes too long, try all the three +different values for this variable and see what works best for you. + In any case, if you use @code{some} or @code{nil}, you should definitely kill all groups that you aren't interested in to speed things up. @@ -1748,13 +1756,14 @@ is somewhat restrictive. Don't you wish you could have Gnus sort the group buffer according to how often you read groups, perhaps? Within reason? -This is what @dfn{group score} is for. You can assign a score to each -group. You can then sort the group buffer based on this score. -Alternatively, you can sort on score and then level. (Taken together, -the level and the score is called the @dfn{rank} of the group. A group -that is on level 4 and has a score of 1 has a higher rank than a group -on level 5 that has a score of 300. (The level is the most significant -part and the score is the least significant part.)) +This is what @dfn{group score} is for. You can have Gnus assign a score +to each group through the mechanism described below. You can then sort +the group buffer based on this score. Alternatively, you can sort on +score and then level. (Taken together, the level and the score is +called the @dfn{rank} of the group. A group that is on level 4 and has +a score of 1 has a higher rank than a group on level 5 that has a score +of 300. (The level is the most significant part and the score is the +least significant part.)) @findex gnus-summary-bubble-group If you want groups you read often to get higher scores than groups you @@ -1934,9 +1943,9 @@ Make a group based on some file or other command, you will be prompted for a file name and a file type. Currently supported types are @code{babyl}, @code{mbox}, @code{digest}, @code{mmdf}, @code{news}, @code{rnews}, @code{clari-briefs}, -@code{rfc934}, @code{rfc822-forward}, and @code{forward}. If you run -this command without a prefix, gnus will guess at the file type. -@xref{Document Groups}. +@code{rfc934}, @code{rfc822-forward}, @code{nsmail} and @code{forward}. +If you run this command without a prefix, Gnus will guess at the file +type. @xref{Document Groups}. @item G u @kindex G u (Group) @@ -4693,6 +4702,13 @@ Limit the summary buffer to articles that match some subject Limit the summary buffer to articles that match some author (@code{gnus-summary-limit-to-author}). +@item / x +@kindex / x (Summary) +@findex gnus-summary-limit-to-extra +Limit the summary buffer to articles that match one of the ``extra'' +headers (@pxref{To From Newsgroups}) +(@code{gnus-summary-limit-to-author}). + @item / u @itemx x @kindex / u (Summary) @@ -6297,6 +6313,7 @@ these articles easier. * Article Buttons:: Click on URLs, Message-IDs, addresses and the like. * Article Date:: Grumble, UT! * Article Signature:: What is a signature? +* Article Miscellania:: Various other stuff. @end menu @@ -6455,6 +6472,13 @@ say something like: (copy-face 'red 'gnus-emphasis-italic) @end lisp +@vindex gnus-group-highlight-words-alist + +If you want to highlight arbitrary words, you can use the +@code{gnus-group-highlight-words-alist} variable, which uses the same +syntax as @code{gnus-emphasis-alist}. The @code{highlight-words} group +parameter (@pxref{Group Parameters}) can also be used. + @xref{Customizing Articles}, for how to fontize articles automatically. @@ -7030,11 +7054,31 @@ the regular expression @samp{^---*Forwarded article}, then it isn't a signature after all. +@node Article Miscellania +@subsection Article Miscellania + +@table @kbd +@item A t +@kindex A t (Summary) +@findex gnus-article-babel +Translate the article from one language to another +(@code{gnus-article-babel}). + +@end table + + @node MIME Commands -@section MIME Commands +@section @sc{mime} Commands @cindex MIME decoding @table @kbd +@item X m +@kindex X m (Summary) +@findex gnus-summary-save-parts +Save all parts matching a @sc{mime} type to a directory +(@code{gnus-summary-save-parts}). Understands the process/prefix +convention (@pxref{Process/Prefix}). + @item M-t @kindex M-t (Summary) @findex gnus-summary-display-buttonized @@ -8313,6 +8357,8 @@ To avoid such kind of situation, gnus stops to use non-@code{nil} every-time, then you can push button in the article buffer when there are nobody else. +Also see @pxref{MIME Commands}. + @node Customizing Articles @section Customizing Articles @@ -8345,7 +8391,12 @@ An integer: Do this treatment on all body parts that have a length less than this number. @item -A list: +A list of strings: Do this treatment on all body parts that are in +articles that are read in groups that have names that match one of the +regexps in the list. + +@item +A list where the first element is not a string: The list is evaluated recursively. The first element of the list is a predicate. The following predicates are recognized: @code{or}, @@ -8407,6 +8458,10 @@ group. @item gnus-treat-display-xface @item gnus-treat-display-smileys @item gnus-treat-display-picons +@item gnus-treat-capitalize-sentences +@item gnus-treat-fill-long-lines +@item gnus-treat-play-sounds +@item gnus-treat-translate @item gnus-treat-decode-article-as-default-mime-charset @end table @@ -10841,6 +10896,7 @@ backends are available separately. The mail backend most people use * Mail Spool:: Store your mail in a private spool? * MH Spool:: An mhspool-like backend. * Mail Folders:: Having one file for each group. +* Comparing Mail Backends:: An in-depth looks at pros and cons. @end menu @@ -11070,6 +11126,127 @@ command to make @code{nnfolder} aware of all likely files in @code{nnfolder-directory}. This only works if you use long file names, though. +@node Comparing Mail Backends +@subsubsection Comparing Mail Backends + +First, just for terminology, the @dfn{backend} is the common word for a +low-level access method---a transport, if you will, by which something +is acquired. The sense is that one's mail has to come from somewhere, +and so selection of a suitable backend is required in order to get that +mail within spitting distance of Gnus. + +The same concept exists for Usenet itself: Though access to articles is +typically done by NNTP these days, once upon a midnight dreary, everyone +in the world got at Usenet by running a reader on the machine where the +articles lay (the machine which today we call an NNTP server), and +access was by the reader stepping into the articles' directory spool +area directly. One can still select between either the @code{nntp} or +@code{nnspool} backends, to select between these methods, if one happens +actually to live on the server (or can see its spool directly, anyway, +via NFS). + +The goal in selecting a mail backend is to pick one which +simultaneously represents a suitable way of dealing with the original +format plus leaving mail in a form that is convenient to use in the +future. Here are some high and low points on each: + +@table @code +@item nnmbox + +UNIX systems have historically had a single, very common, and well- +defined format. All messages arrive in a single @dfn{spool file}, and +they are delineated by a line whose regular expression matches +@samp{^From_}. (My notational use of @samp{_} is to indicate a space, +to make it clear in this instance that this is not the RFC-specified +@samp{From:} header.) Because Emacs and therefore Gnus emanate +historically from the Unix environment, it is simplest if one does not +mess a great deal with the original mailbox format, so if one chooses +this backend, Gnus' primary activity in getting mail from the real spool +area to Gnus' preferred directory is simply to copy it, with no +(appreciable) format change in the process. It is the ``dumbest'' way +to move mail into availability in the Gnus environment. This makes it +fast to move into place, but slow to parse, when Gnus has to look at +what's where. + +@item nnbabyl + +Once upon a time, there was the DEC-10 and DEC-20, running operating +systems called TOPS and related things, and the usual (only?) mail +reading environment was a thing called Babyl. I don't know what format +was used for mail landing on the system, but Babyl had its own internal +format to which mail was converted, primarily involving creating a +spool-file-like entity with a scheme for inserting Babyl-specific +headers and status bits above the top of each message in the file. +RMAIL was Emacs' first mail reader, it was written by Richard Stallman, +and Stallman came out of that TOPS/Babyl environment, so he wrote RMAIL +to understand the mail files folks already had in existence. Gnus (and +VM, for that matter) continue to support this format because it's +perceived as having some good qualities in those mailer-specific +headers/status bits stuff. RMAIL itself still exists as well, of +course, and is still maintained by Stallman. + +Both of the above forms leave your mail in a single file on your +filesystem, and they must parse that entire file each time you take a +look at your mail. + +@item nnml + +@code{nnml} is the backend which smells the most as though you were +actually operating with an @code{nnspool}-accessed Usenet system. (In +fact, I believe @code{nnml} actually derived from @code{nnspool} code, +lo these years ago.) One's mail is taken from the original spool file, +and is then cut up into individual message files, 1:1. It maintains a +Usenet-style active file (analogous to what one finds in an INN- or +CNews-based news system in (for instance) @file{/var/lib/news/active}, +or what is returned via the @samp{NNTP LIST} verb) and also creates +@dfn{overview} files for efficient group entry, as has been defined for +@sc{nntp} servers for some years now. It is slower in mail-splitting, +due to the creation of lots of files, updates to the @code{nnml} active +file, and additions to overview files on a per-message basis, but it is +extremely fast on access because of what amounts to the indexing support +provided by the active file and overviews. + +@code{nnml} costs @dfn{inodes} in a big way; that is, it soaks up the +resource which defines available places in the filesystem to put new +files. Sysadmins take a dim view of heavy inode occupation within +tight, shared filesystems. But if you live on a personal machine where +the filesystem is your own and space is not at a premium, @code{nnml} +wins big. + +It is also problematic using this backend if you are living in a +FAT16-based Windows world, since much space will be wasted on all these +tiny files. + +@item nnmh + +The Rand MH mail-reading system has been around UNIX systems for a very +long time; it operates by splitting one's spool file of messages into +individual files, but with little or no indexing support -- @code{nnmh} +is considered to be semantically equivalent to ``@code{nnml} without +active file or overviews''. This is arguably the worst choice, because +one gets the slowness of individual file creation married to the +slowness of access parsing when learning what's new in one's groups. + +@item nnfolder + +Basically the effetc of @code{nnfolder} is @code{nnmbox} (the first +method described above) on a per-group basis. That is, @code{nnmbox} +itself puts *all* one's mail in one file; @code{nnfolder} provides a +little bit of optimization to this so that each of one's mail groups has +a Unix mail box file. It's faster than @code{nnmbox} because each group +can be parsed separately, and still provides the simple Unix mail box +format requiring minimal effort in moving the mail around. In addition, +it maintains an ``active'' file making it much faster for Gnus to figure +out how many messages there are in each separate group. + +If you have groups that are expected to have a massive amount of +messages, @code{nnfolder} is not the best choice, but if you receive +only a moderate amount of mail, @code{nnfolder} is probably the most +friendly mail backend all over. + +@end table + + @node Other Sources @section Other Sources @@ -11216,6 +11393,9 @@ The rnews batch transport format. @item forward Forwarded articles. +@item nsmail +Netscape mail boxes. + @item mime-parts MIME multipart messages. @@ -11254,7 +11434,7 @@ Virtual server variables: This should be one of @code{mbox}, @code{babyl}, @code{digest}, @code{news}, @code{rnews}, @code{mmdf}, @code{forward}, @code{rfc934}, @code{rfc822-forward}, @code{mime-parts}, @code{standard-digest}, -@code{slack-digest}, @code{clari-briefs} or @code{guess}. +@code{slack-digest}, @code{clari-briefs}, @code{nsmail} or @code{guess}. @item nndoc-post-type @vindex nndoc-post-type @@ -18811,6 +18991,20 @@ but it gives an error that it cant access the group. Is the "+" character illegal in newsgroup names? Is there any way in Gnus to work around this? (gnus 5.6.45 - XEmacs 20.4) +@item + +When `#F', do: + +@example +Subject: Answer to your mails 01.01.1999-01.05.1999 + --text follows this line-- +Sorry I killfiled you... + +Under the subject "foo", you wrote on 01.01.1999: +> bar +Under the subject "foo1", you wrote on 01.01.1999: +> bar 1 +@end example @item Solve the halting problem.