From: tomo Date: Wed, 31 Mar 1999 09:03:37 +0000 (+0000) Subject: Initial revision X-Git-Tag: r21-2b1~8 X-Git-Url: http://git.chise.org/gitweb/?a=commitdiff_plain;h=2ecbafc1fad0c3a797e078ac76ade7639bd3b925;p=chise%2Fxemacs-chise.git- Initial revision --- diff --git a/Makefile.in.in b/Makefile.in.in new file mode 100644 index 0000000..5d6f4f2 --- /dev/null +++ b/Makefile.in.in @@ -0,0 +1,632 @@ +## DIST: This is the distribution Makefile for XEmacs. configure can +## DIST: make most of the changes to this file you might want, so try +## DIST: that first. + +## This file is part of XEmacs. + +## XEmacs is free software; you can redistribute it and/or modify it +## under the terms of the GNU General Public License as published by the +## Free Software Foundation; either version 2, or (at your option) any +## later version. + +## XEmacs is distributed in the hope that it will be useful, but WITHOUT +## ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or +## FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License +## for more details. + +## You should have received a copy of the GNU General Public License +## along with XEmacs; see the file COPYING. If not, write to +## the Free Software Foundation, Inc., 59 Temple Place - Suite 330, +## Boston, MA 02111-1307, USA. + +## make all to compile and build XEmacs. +## make install to build and install it. +## make install-only to install after a previous complete build +## make TAGS to update tags tables. + +## make clean or make mostlyclean +## Delete all files from the current directory that are normally +## created by building the program. Don't delete the files that +## record the configuration. Also preserve files that could be made +## by building, but normally aren't because the distribution comes +## with them. + +## Delete `.dvi' files here if they are not part of the distribution. + +## make distclean +## Delete all files from the current directory that are created by +## configuring or building the program. If you have unpacked the +## source and built the program without creating any other files, +## `make distclean' should leave only the files that were in the +## distribution. + +## make realclean +## Delete everything from the current directory that can be +## reconstructed with this Makefile. This typically includes +## everything deleted by distclean, plus more: C source files +## produced by Bison, tags tables, info files, and so on. + +## make extraclean +## Still more severe - delete backup and autosave files, too. + +#ifdef USE_GNU_MAKE +RECURSIVE_MAKE=$(MAKE) +#else +@SET_MAKE@ +RECURSIVE_MAKE=@RECURSIVE_MAKE@ +#endif + +SHELL = /bin/sh +LANG = C +RM = rm -f +pwd = /bin/pwd + +## ==================== Things `configure' Might Edit ==================== + +CC=@CC@ +CPP=@CPP@ +LN_S=@LN_S@ +CFLAGS=@CFLAGS@ +CPPFLAGS=@CPPFLAGS@ + +## These help us choose version- and architecture-specific directories +## to install files in. + +## This should be the number of the XEmacs version we're building, +## like `19.12' or `19.13'. +version=@version@ + +## This should be the name of the configuration we're building XEmacs +## for, like `mips-dec-ultrix' or `sparc-sun-sunos'. +configuration=@configuration@ + +## This will be the name of the generated binary and is set automatically +## by configure. +PROGNAME=@PROGNAME@ + +## ==================== Where To Install Things ==================== + +## The default location for installation. Everything is placed in +## subdirectories of this directory. The default values for many of +## the variables below are expressed in terms of this one, so you may +## not need to change them. This defaults to /usr/local. +prefix=@prefix@ + +## Like `prefix', but used for architecture-specific files. +exec_prefix=@exec_prefix@ + +## Where to install XEmacs and other binaries that people will want to +## run directly (like etags). +bindir=@bindir@ + +## Where to install architecture-independent data files. +## ${lispdir} and ${etcdir} are subdirectories of this. +datadir=@datadir@ + +## Where to find XEmacs packages. +pkgdir=@pkgdir@ + +## Where to install and expect the files that XEmacs modifies as it runs. +## These files are all architecture-independent. Right now, the +## only such data is the locking directory; +## ${lockdir} is a subdirectory of this. +statedir=@statedir@ + +## Where to install and expect executable files to be run by XEmacs +## rather than directly by users, and other architecture-dependent data +## ${archlibdir} is a subdirectory of this. +libdir=@libdir@ + +## Where to install XEmacs's man pages, and what extension they should have. +mandir=@mandir@ +manext=.1 + +## Where to install and expect the info files describing XEmacs. In the +## past, this defaulted to a subdirectory of ${prefix}/lib/xemacs, but +## since there are now many packages documented with the texinfo +## system, it is inappropriate to imply that it is part of XEmacs. +infodir=@infodir@ + +## Document me. +## See callproc.c for code which references this. +infopath=@infopath@ + +## Where to find the source code. The source code for XEmacs's C kernel is +## expected to be in ${srcdir}/src, and the source code for XEmacs's +## utility programs is expected to be in ${srcdir}/lib-src. This is +## set by the configure script's `--srcdir' option. +srcdir=@srcdir@ + +## Where the build is done. +blddir=@blddir@ + +## ==================== XEmacs-specific directories ==================== + +## These variables hold the values XEmacs will actually use. They are +## based on the values of the standard Make variables above. + +## Where to install the lisp files distributed with +## XEmacs. This includes the XEmacs version, so that the +## lisp files for different versions of XEmacs will install +## themselves in separate directories. +lispdir=@lispdir@ + +## Directory XEmacs should search for lisp files specific +## to this site (i.e. customizations), before consulting +## ${lispdir}. +sitelispdir=@sitelispdir@ + +## Where XEmacs will search for its lisp files while +## building. This is only used during the process of +## compiling XEmacs, to help XEmacs find its lisp files +## before they've been installed in their final location. +## It's usually identical to lispdir, except that the +## entry for the directory containing the installed lisp +## files has been replaced with ../lisp. This should be a +## colon-separated list of directories. +buildlispdir=${srcdir}/lisp + +## Where to install the other architecture-independent +## data files distributed with XEmacs (like the tutorial, +## the cookie recipes and the Zippy database). This path +## usually contains the XEmacs version number, so the data +## files for multiple versions of XEmacs may be installed +## at once. +etcdir=@etcdir@ + +## Where to create and expect the locking directory, where +## the XEmacs locking code keeps track of which files are +## currently being edited. +lockdir=@lockdir@ + +## Where to put executables to be run by XEmacs rather than +## the user. This path usually includes the XEmacs version +## and configuration name, so that multiple configurations +## for multiple versions of XEmacs may be installed at +## once. +archlibdir=@archlibdir@ + +## ==================== Utility Programs for the Build ==================== + +## Allow the user to specify the install program. +INSTALL = @install_pp@ @INSTALL@ +INSTALL_PROGRAM = @INSTALL_PROGRAM@ +INSTALL_DATA = @INSTALL_DATA@ + +## ============================= Targets ============================== + +## Subdirectories to make recursively. `lisp' is not included +## because the compiled lisp files are part of the distribution +## and you cannot remake them without installing XEmacs first. +MAKE_SUBDIR = @MAKE_SUBDIR@ + +## Subdirectories that can be made recursively. +SUBDIR = ${MAKE_SUBDIR} man + +## The makefiles of the directories in ${MAKE_SUBDIR}. +SUBDIR_MAKEFILES = @SUBDIR_MAKEFILES@ + +## Subdirectories to `make install-arch-dep' recursively +INSTALL_ARCH_DEP_SUBDIR = @INSTALL_ARCH_DEP_SUBDIR@ + +## Subdirectories to install, and where they'll go. +## lib-src's makefile knows how to install it, so we don't do that here. +## When installing the info files, we need to do special things to +## avoid nuking an existing dir file, so we don't do that here; +## instead, we have written out explicit code in the `install' targets. +COPYDIR = ${srcdir}/etc ${srcdir}/lisp +COPYDESTS = ${etcdir} ${lispdir} +GENERATED_HEADERS = src/paths.h src/Emacs.ad.h src/puresize-adjust.h src/config.h lwlib/config.h src/sheap-adjust.h +GENERATED_LISP = lisp/finder-inf.el + +all: ${PROGNAME} all-elc info + +${PROGNAME}: ${GENERATED_HEADERS} ${MAKE_SUBDIR} ${GENERATED_LISP} + +## For performance and consistency, no built-in rules +.SUFFIXES: + +.NO_PARALLEL: ${GENERATED_HEADERS} ${MAKE_SUBDIR} dump-elcs +.PHONY: ${SUBDIR} all beta all-elc all-elcs dump-elc dump-elcs autoloads finder + +## Convenience target for XEmacs beta testers +beta: clean all-elc finder + +## Convenience target for XEmacs maintainers +## This would run `make-xemacsdist' if I were really confident that everything +## was turnkey. +dist: all-elc info + +## Convenience target for XEmacs maintainers +## Updates some rarely generated files: +## - configure from configure.in +## - config.values.in from configure +## - src/depend from src/*.[ch] +.PHONY: config configure depend +config: configure depend +configure: ${srcdir}/configure +${srcdir}/configure: ${srcdir}/configure.in + cd ${srcdir} && autoconf + cd ${srcdir} && /bin/sh lib-src/config.values.sh + +depend ${srcdir}/src/depend: + cd ${srcdir}/src && \ + perl ./make-src-depend > depend.tmp && \ + $(RM) depend && mv depend.tmp depend + +## Build XEmacs and recompile out-of-date and missing .elc files along +## the way. +all-elc all-elcs: lib-src lwlib dump-elcs src + MAKE='$(MAKE)' EMACS='./src/$(PROGNAME)' sh ${srcdir}/lib-src/update-elc.sh + +## Sub-target for all-elc. +dump-elc dump-elcs: ${GENERATED_HEADERS} FRC.dump-elcs + cd ./src && $(RECURSIVE_MAKE) dump-elcs + +autoloads: src + MAKE='$(MAKE)' EMACS='./src/$(PROGNAME)' sh ${srcdir}/lib-src/update-autoloads.sh + +custom-loads: + MAKE='$(MAKE)' EMACS='./src/$(PROGNAME)' sh ${srcdir}/lib-src/update-custom.sh + +finder: src + @echo "Building finder database ..." + @(cd ./lisp; \ + ${blddir}/src/${PROGNAME} -batch -vanilla \ + -eval '(setq finder-compile-keywords-quiet t)' \ + -l finder -f finder-compile-keywords ) + @echo "Building finder database ...(done)" + +lisp/finder-inf.el: + @echo "Building finder database ..." + @(cd ./lisp; \ + ${blddir}/src/${PROGNAME} -batch -vanilla \ + -eval '(setq finder-compile-keywords-quiet t)' \ + -l finder -f finder-compile-keywords ) + @echo "Building finder database ...(done)" + +## We have to force the building of Emacs.ad.h as well in order to get it +## updated correctly when VPATH is being used. Since we use move-if-change, +## it will only actually change if the user modified ${etcdir}/Emacs.ad. +src/Emacs.ad.h: ${srcdir}/etc/Emacs.ad + @echo "Producing \`src/Emacs.ad.h' from \`etc/Emacs.ad'." + @$(RM) src/Emacs.ad.h + @(echo "/* Do not edit this file!" ; \ + echo " Automatically generated from ${srcdir}/etc/Emacs.ad" ; \ + echo " */" ; \ + /bin/sh ${srcdir}/lib-src/ad2c ${srcdir}/etc/Emacs.ad ) > \ + src/Emacs.ad.h + +src/puresize-adjust.h: ${srcdir}/src/puresize.h + @echo "Resetting \`src/puresize-adjust.h'."; \ + (echo "/* Do not edit this file!" ; \ + echo " Automatically generated by XEmacs */" ; \ + echo "#define PURESIZE_ADJUSTMENT 0") > $@ + +src/sheap-adjust.h: + @echo "Resetting \`src/sheap-adjust.h'."; \ + (echo "/* Do not edit this file!" ; \ + echo " Automatically generated by XEmacs */" ; \ + echo "#define SHEAP_ADJUSTMENT 0") > $@ + +src: @SRC_SUBDIR_DEPS@ FRC.src +pkg-src/tree-x: pkg-src/FRC.tree-x +lib-src: FRC.lib-src +lwlib: FRC.lwlib +dynodump: FRC.dynodump +FRC.src FRC.lib-src FRC.lwlib FRC.dynodump pkg-src/FRC.tree-x: +FRC.lisp.finder-inf.el: + +${SUBDIR}: ${SUBDIR_MAKEFILES} ${GENERATED_HEADERS} FRC + cd ./$@ && $(RECURSIVE_MAKE) all + +Makefile: ${srcdir}/Makefile.in config.status + ./config.status + +src/Makefile: ${srcdir}/src/Makefile.in.in ${srcdir}/src/depend config.status + ./config.status + +lib-src/Makefile: ${srcdir}/lib-src/Makefile.in.in config.status + ./config.status + +lwlib/Makefile: ${srcdir}/lwlib/Makefile.in.in config.status + ./config.status + +pkg-src/tree-x/Makefile: ${srcdir}/pkg-src/tree-x/Makefile.in.in config.status + ./config.status + +src/config.h: ${srcdir}/src/config.h.in + ./config.status && touch $@ + +src/paths.h: ${srcdir}/src/paths.h.in + ./config.status && touch $@ + +lwlib/config.h: ${srcdir}/lwlib/config.h.in + ./config.status && touch $@ + +## ==================== Installation ==================== + +## If we let lib-src do its own installation, that means we +## don't have to duplicate the list of utilities to install in +## this Makefile as well. + +## On AIX, use tar xBf. +## On Xenix, use tar xpf. + +.PHONY: install-only install install-arch-dep install-arch-indep gzip.el mkdir +.PHONY: check-features + +## We delete each directory in ${COPYDESTS} before we copy into it; +## that way, we can reinstall over directories that have been put in +## place with their files read-only (perhaps because they are checked +## into RCS). In order to make this safe, we make sure that the +## source exists and is distinct from the destination. + +## FSF doesn't depend on `all', but rather on ${MAKE_SUBDIR}, so that +## they "won't ever modify src/paths.h". But that means you can't do +## 'make install' right off the bat because src/paths.h won't exist. +## And, in XEmacs case, src/Emacs.ad.h won't exist either. I also +## don't see the point in avoiding modifying paths.h. It creates an +## inconsistency in the build process. So we go ahead and depend on +## all. --cet + +check-features: all + ${blddir}/src/${PROGNAME} -batch -l check-features.el + +install-only: ${MAKE_SUBDIR} check-features install-arch-dep install-arch-indep + +install: all check-features install-arch-dep install-arch-indep + +install-arch-dep: mkdir + for subdir in ${INSTALL_ARCH_DEP_SUBDIR}; do \ + (cd ./$${subdir} && $(RECURSIVE_MAKE) install prefix=${prefix} \ + exec_prefix=${exec_prefix} bindir=${bindir} libdir=${libdir} \ + archlibdir=${archlibdir}) ; done + if test "`(cd ${archlibdir} && $(pwd))`" != \ + "`(cd ./lib-src && $(pwd))`"; then \ + if test -f ../Installation; then \ + ${INSTALL_DATA} ../Installation ${archlibdir}/Installation; \ + fi; \ + for f in DOC config.values; do \ + ${INSTALL_DATA} lib-src/$${f} ${archlibdir}/$${f}; \ + done ; \ + for subdir in `find ${archlibdir} -type d ! -name RCS ! -name SCCS ! -name CVS -print` ; \ + do (cd $${subdir} && $(RM) -r RCS CVS SCCS \#* *~) ; done ; \ + else true; fi + ${INSTALL_PROGRAM} src/${PROGNAME} ${bindir}/${PROGNAME}-${version} + -chmod 0755 ${bindir}/${PROGNAME}-${version} + cd ${bindir} && $(RM) ./${PROGNAME} && ${LN_S} ${PROGNAME}-${version} ./${PROGNAME} + if test "${prefix}" != "${exec_prefix}"; then \ + for dir in \ + lib/${PROGNAME} \ + lib/${PROGNAME}-${version}/etc \ + lib/${PROGNAME}-${version}/info \ + lib/${PROGNAME}-${version}/lisp; do \ + if test ! -d ${exec_prefix}/$${dir}; then \ + $(LN_S) ${prefix}/$${dir} ${exec_prefix}/$${dir}; fi; \ + done; \ + fi + +install-arch-indep: mkdir info + -@set ${COPYDESTS} ; \ + for dir in ${COPYDIR} ; do \ + if test "`(cd $$1 && $(pwd))`" != \ + "`(cd $${dir} && $(pwd))`"; then \ + : do nothing - echo "rm -rf $$1" ; \ + fi ; \ + shift ; \ + done + -set ${COPYDESTS} ; \ + for dir in ${COPYDESTS} ; do \ + if test ! -d $${dir} ; then mkdir $${dir} ; fi ; \ + done ; \ + for dir in ${COPYDIR} ; do \ + dest=$$1 ; shift ; \ + test -d $${dir} \ + -a "`(cd $${dir} && $(pwd))`" != \ + "`(cd $${dest} && $(pwd))`" \ + && (echo "Copying $${dir}..." ; \ + (cd $${dir} && tar -cf - . ) | \ + (cd $${dest} && umask 022 && tar -xf - );\ + chmod 0755 $${dest}; \ + for subdir in `find $${dest} -type d ! -name RCS ! -name SCCS ! -name CVS -print` ; do \ + (cd $${subdir} && $(RM) -r RCS CVS SCCS \#* *~) ; \ + done) ; \ + done + if test "`(cd ${srcdir}/info && $(pwd))`" != \ + "`(cd ${infodir} && $(pwd))`" && cd ${srcdir}/info; then \ + if test ! -f ${infodir}/dir -a -f dir ; then \ + ${INSTALL_DATA} ${srcdir}/info/dir ${infodir}/dir ; \ + fi ; \ + for file in *.info* ; do \ + ${INSTALL_DATA} $${file} ${infodir}/$${file} ; \ + chmod 0644 ${infodir}/$${file}; \ + done ; \ + fi + ## Note it's `xemacs' not ${PROGNAME} + cd ${srcdir}/etc && \ + for page in xemacs etags ctags gnuserv gnuclient gnuattach gnudoit; do \ + ${INSTALL_DATA} ${srcdir}/etc/$${page}.1 ${mandir}/$${page}${manext} ; \ + chmod 0644 ${mandir}/$${page}${manext} ; \ + done + @echo "If you would like to save approximately 2M of disk space, do" + @echo "make gzip-el" + @echo "or you may run " + @echo ${srcdir}/lib-src/gzip-el.sh lispdir " from the command line." + @echo "Where lispdir is where the lisp files were installed, i.e.," + @echo "${lispdir}" + +gzip-el: + ${srcdir}/lib-src/gzip-el.sh ${lispdir} + +MAKEPATH=./lib-src/make-path +## Build all the directories to install XEmacs in. +## Since we may be creating several layers of directories, +## (e.g. /usr/local/lib/${PROGNAME}-20.5/sparc-sun-solaris2.6), we use +## make-path instead of mkdir. Not all mkdirs have the `-p' flag. +mkdir: FRC.mkdir + ${MAKEPATH} ${COPYDESTS} ${lockdir} ${infodir} ${archlibdir} \ + ${mandir} ${bindir} ${datadir} ${libdir} ${pkgdir} + -chmod 0777 ${lockdir} + +## Delete all the installed files that the `install' target would +## create (but not the noninstalled files such as `make all' would +## create). + +#### Don't delete the lisp and etc directories if they're in the source tree. +#### This target has not been updated in sometime and until it is it +#### would be extremely dangerous for anyone to use it. +##uninstall: +## (cd ./lib-src; \ +## $(RECURSIVE_MAKE) uninstall \ +## prefix=${prefix} exec_prefix=${exec_prefix} \ +## bindir=${bindir} libdir=${libdir} archlibdir=${archlibdir}) +## for dir in ${lispdir} ${etcdir} ; do \ +## case `(cd $${dir} ; $(pwd))` in \ +## `(cd ${srcdir} ; $(pwd))`* ) ;; \ +## * ) $(RM) $${dir} ;; \ +## esac ; \ +## case $${dir} in \ +## ${datadir}/${PROGNAME}/${version}/* ) \ +## $(RM) -r ${datadir}/${PROGNAME}/${version} \ +## ;; \ +## esac ; \ +## done +## cd ${infodir} && $(RM) cl* ${PROGNAME}* forms* info* vip* +## cd ${mandir} && $(RM) xemacs.1 etags.1 ctags.1 gnuserv.1 +## cd ${bindir} && $(RM) ${PROGNAME}-${version} ${PROGNAME} + + +## Some makes seem to remember that they've built something called FRC, +## so you can only use a given FRC once per makefile. +FRC FRC.src.paths.h FRC.mkdir FRC.dump-elcs FRC.info: +FRC.mostlyclean FRC.clean FRC.distclean FRC.realclean FRC.tags: + +## ==================== Cleaning up and miscellanea ==================== + +.PHONY: mostlyclean clean distclean realclean extraclean + +## `mostlyclean' +## Like `clean', but may refrain from deleting a few files that people +## normally don't want to recompile. For example, the `mostlyclean' +## target for GCC does not delete `libgcc.a', because recompiling it +## is rarely necessary and takes a lot of time. +mostlyclean: FRC.mostlyclean + for d in $(SUBDIR); do (cd ./$$d && $(RECURSIVE_MAKE) $@); done + +## `clean' +## Delete all files from the current directory that are normally +## created by building the program. Don't delete the files that +## record the configuration. Also preserve files that could be made +## by building, but normally aren't because the distribution comes +## with them. + +## Delete `.dvi' files here if they are not part of the distribution. +clean: FRC.clean + for d in $(SUBDIR); do (cd ./$$d && $(RECURSIVE_MAKE) $@); done + $(RM) core + +## `distclean' +## Delete all files from the current directory that are created by +## configuring or building the program. If you have unpacked the +## source and built the program without creating any other files, +## `make distclean' should leave only the files that were in the +## distribution. +top_distclean=\ + $(RM) config.status config.log config-tmp-* build-install Installation ; \ + for d in src lib-src lwlib dynodump ; do \ + $(RM) $$d/Makefile $$d/Makefile.in ; \ + done ; \ + $(RM) core .sbinit Makefile Makefile.in lock/*; \ + $(RM) lisp/finder-inf.el* Installation.el Installation.elc; \ + $(RM) packages mule-packages site-lisp + +distclean: FRC.distclean + for d in $(SUBDIR); do (cd ./$$d && $(RECURSIVE_MAKE) $@); done + -${top_distclean} + +## `realclean' +## Delete everything from the current directory that can be +## reconstructed with this Makefile. This typically includes +## everything deleted by distclean, plus more: C source files +## produced by Bison, tags tables, info files, and so on. + +## One exception, however: `make realclean' should not delete +## `configure' even if `configure' can be remade using a rule in the +## Makefile. More generally, `make realclean' should not delete +## anything that needs to exist in order to run `configure' and then +## begin to build the program. +realclean: FRC.realclean + for d in $(SUBDIR); do (cd ./$$d && $(RECURSIVE_MAKE) $@); done + -${top_distclean} + $(RM) TAGS + +## This doesn't actually appear in the coding standards, but Karl +## says GCC supports it, and that's where the configuration part of +## the coding standards seem to come from. It's like distclean, but +## it deletes backup and autosave files too. +extraclean: + for d in $(SUBDIR); do (cd ./$$d && $(RECURSIVE_MAKE) $@); done + $(RM) *~ \#* + -${top_distclean} + +## Unlocking and relocking. The idea of these productions is to reduce +## hassles when installing an incremental tar of XEmacs. Do `make unlock' +## before unlocking the file to take the write locks off all sources so +## that tar xvof will overwrite them without fuss. Then do `make relock' +## afterward so that VC mode will know which files should be checked in +## if you want to mung them. + +## Note: it's no disaster if these productions miss a file or two; tar +## and VC will swiftly let you know if this happens, and it is easily +## corrected. +SOURCES = ChangeLog GETTING.GNU.SOFTWARE INSTALL Makefile.in PROBLEMS \ + README build-install.in configure make-dist move-if-change + +.PHONY: unlock relock TAGS tags check dist info dvi mcs + +unlock: + chmod u+w $(SOURCES) cpp/* + -cd ./elisp && chmod u+w Makefile README *.texi + for d in src etc lib-src lisp; do (cd ./$$d && $(RECURSIVE_MAKE) $@); done + cd ./lisp/term && chmod u+w README *.el + cd ./man && chmod u+w *texi* ChangeLog split-man + cd ./lwlib && chmod u+w *.[ch] Makefile.in.in + +relock: + chmod u-w $(SOURCES) cpp/* + -cd ./elisp && chmod u-w Makefile README *.texi + for d in src etc lib-src lisp; do (cd ./$$d && $(RECURSIVE_MAKE) $@); done + cd ./lisp/term && chmod u+w README *.el + cd ./man && chmod u+w *texi* ChangeLog split-man + cd ./lwlib && chmod u+w *.[ch] Makefile.in.in + +PRUNE_VC = -name SCCS -prune -o -name RCS -prune -o -name CVS -prune -o +tagslisp = lisp +TAGS tags: FRC.tags + @echo "If you don't have a copy of etags around, then do 'make lib-src' first." + $(RM) ${srcdir}/TAGS + @PATH=`$(pwd)`/lib-src:$$PATH HOME=/-=-; export PATH HOME; \ + echo "Using etags from `which etags`." + PATH=`$(pwd)`/lib-src:$$PATH ; export PATH; cd ${srcdir} && \ + find src lwlib lib-src ${PRUNE_VC} -name '*.[ch]' -print | \ + xargs etags -a -r '/[ ]*DEF\(VAR\|INE\)_[A-Z_]+[ ]*([ ]*"\([^"]+\)"/\2/'; \ + find ${tagslisp} ${PRUNE_VC} -name '*.el' ! -name 'auto-autoloads.el' -print | \ + xargs etags -a -l none -r "/^(def\\(var\\|un\\|alias\\|const\\|macro\\|subst\\|struct\\|face\\|group\\|custom\\|ine-\\(function\\|compiler-macro\\|[a-z-]+alias\\)\\)[ ]+'?\\([^ ]+\\)/\\3/" + +check: + cd ./src && $(RECURSIVE_MAKE) $@ + +info: FRC.info + cd ${srcdir}/man && $(RECURSIVE_MAKE) $@ + +dvi: + cd ${srcdir}/man && $(RECURSIVE_MAKE) $@ + +## Fix up version information in executables (Solaris-only) +mcs: + date=`LANG=C LC_ALL=C date -u '+%e %b %Y'`; \ + ident="@(#)RELEASE VERSION XEmacs ${version} $${date}"; \ + for f in `file lib-src/* src/${PROGNAME} | grep ELF | sed -e 's/:.*//'`; do \ + mcs -da "$${ident} `echo $${f} | sed 's/.*\///'`" $${f}; \ + done