XEmacs 21.2.25 "Hephaestus".

[chise/xemacs-chise.git.1] / info / xemacs-faq.info-2

This is ../info/xemacs-faq.info, produced by makeinfo version 4.0 from
xemacs-faq.texi.

INFO-DIR-SECTION XEmacs Editor
START-INFO-DIR-ENTRY
* FAQ: (xemacs-faq).            XEmacs FAQ.
END-INFO-DIR-ENTRY

\1f
File: xemacs-faq.info,  Node: Installation,  Next: Customization,  Prev: Introduction,  Up: Top

2 Installation and Trouble Shooting
***********************************

   This is part 2 of the XEmacs Frequently Asked Questions list.  This
section is devoted to Installation, Maintenance and Trouble Shooting.

* Menu:

Installation:
* Q2.0.1::      Running XEmacs without installing.
* Q2.0.2::      XEmacs is too big.
* Q2.0.3::      Compiling XEmacs with Netaudio.
* Q2.0.4::      Problems with Linux and ncurses.
* Q2.0.5::      Do I need X11 to run XEmacs?
* Q2.0.6::      I'm having strange crashes.  What do I do?
* Q2.0.7::      Libraries in non-standard locations.
* Q2.0.8::      can't resolve symbol _h_errno
* Q2.0.9::      Where do I find external libraries?
* Q2.0.10::     After I run configure I find a coredump, is something wrong?
* Q2.0.11::     XEmacs can't resolve host names.
* Q2.0.12::     Why can't I strip XEmacs?
* Q2.0.13::     Can't link XEmacs on Solaris with Gcc.
* Q2.0.14::     Make on HP/UX 9 fails after linking temacs

Trouble Shooting:
* Q2.1.1::      XEmacs just crashed on me!
* Q2.1.2::      Cryptic Minibuffer messages.
* Q2.1.3::      Translation Table Syntax messages at Startup.
* Q2.1.4::      Startup warnings about deducing proper fonts?
* Q2.1.5::      XEmacs cannot connect to my X Terminal.
* Q2.1.6::      XEmacs just locked up my Linux X server.
* Q2.1.7::      HP Alt key as Meta.
* Q2.1.8::      got (wrong-type-argument color-instance-p nil)!
* Q2.1.9::      XEmacs causes my OpenWindows 3.0 server to crash.
* Q2.1.10::     Warnings from incorrect key modifiers.
* Q2.1.11::     Can't instantiate image error... in toolbar
* Q2.1.12::     Regular Expression Problems on DEC OSF1.
* Q2.1.13::     HP/UX 10.10 and `create_process' failure
* Q2.1.14::     C-g doesn't work for me.  Is it broken?
* Q2.1.15::     How to debug an XEmacs problem with a debugger.
* Q2.1.16::     XEmacs crashes in `strcat' on HP/UX 10.
* Q2.1.17::     `Marker does not point anywhere'.
* Q2.1.18::     19.14 hangs on HP/UX 10.10.
* Q2.1.19::     XEmacs does not follow the local timezone.
* Q2.1.20::     `Symbol's function definition is void: hkey-help-show.'
* Q2.1.21::     Every so often the XEmacs frame freezes.
* Q2.1.22::     XEmacs seems to take a really long time to do some things.
* Q2.1.23::     Movemail on Linux does not work for XEmacs 19.15 and later.
* Q2.1.24::     XEmacs won't start without network. (NEW)

\1f
File: xemacs-faq.info,  Node: Q2.0.1,  Next: Q2.0.2,  Prev: Installation,  Up: Installation

2.0: Installation
=================

Q2.0.1: Running XEmacs without installing
-----------------------------------------

   The `INSTALL' file says that up to 108 MB of space is needed
temporarily during installation!  How can I just try it out?

   XEmacs will run in place without requiring installation and copying
of the Lisp directories, and without having to specify a special
build-time flag.  It's the copying of the Lisp directories that
requires so much space.  XEmacs is largely written in Lisp.

   A good method is to make a shell alias for xemacs:

     alias xemacs=/i/xemacs-20.2/src/xemacs

   (You will obviously use whatever directory you downloaded the source
tree to instead of `/i/xemacs-20.2').

   This will let you run XEmacs without massive copying.

\1f
File: xemacs-faq.info,  Node: Q2.0.2,  Next: Q2.0.3,  Prev: Q2.0.1,  Up: Installation

Q2.0.2: XEmacs is too big
-------------------------

   Although this entry has been written for XEmacs 19.13, most of it
still stands true.

   Steve Baur <steve@xemacs.org> writes:

     The 45MB of space required by the installation directories can be
     reduced dramatically if desired.  Gzip all the .el files.  Remove
     all the packages you'll never want to use (or even ones you do
     like the two obsolete mailcrypts and Gnus 4 in 19.13).  Remove the
     TexInfo manuals.  Remove the Info (and use just hardcopy versions
     of the manual).  Remove most of the stuff in etc.  Remove or gzip
     all the source code.  Gzip or remove the C source code.  Configure
     it so that copies are not made of the support lisp.  I'm not
     advocating any of these things, just pointing out ways to reduce
     the disk requirements if desired.

     Now examine the space used by directory:

     0  /usr/local/bin/xemacs
     2048       /usr/local/bin/xemacs-19.13
     
     1546       /usr/local/lib/xemacs-19.13/i486-miranova-sco3.2v4.2
     1158       /usr/local/lib/xemacs-19.13/i486-unknown-linux1.2.13

     You need to keep these.  XEmacs isn't stripped by default in
     installation, you should consider stripping.  That will save you
     about 5MB right there.

     207        /usr/local/lib/xemacs-19.13/etc/w3
     122        /usr/local/lib/xemacs-19.13/etc/sounds
     18 /usr/local/lib/xemacs-19.13/etc/sparcworks
     159        /usr/local/lib/xemacs-19.13/etc/vm
     6  /usr/local/lib/xemacs-19.13/etc/e
     21 /usr/local/lib/xemacs-19.13/etc/eos
     172        /usr/local/lib/xemacs-19.13/etc/toolbar
     61 /usr/local/lib/xemacs-19.13/etc/ns
     43 /usr/local/lib/xemacs-19.13/etc/gnus

     These are support directories for various packages.  In general
     they match a directory under
     ./xemacs-19.13/lib/xemacs-19.13/lisp/.  If you do not require the
     package, you may delete or gzip the support too.

     1959       /usr/local/lib/xemacs-19.13/etc
     175        /usr/local/lib/xemacs-19.13/lisp/bytecomp
     340        /usr/local/lib/xemacs-19.13/lisp/calendar
     342        /usr/local/lib/xemacs-19.13/lisp/comint
     517        /usr/local/lib/xemacs-19.13/lisp/dired
     42 /usr/local/lib/xemacs-19.13/lisp/electric
     212        /usr/local/lib/xemacs-19.13/lisp/emulators
     238        /usr/local/lib/xemacs-19.13/lisp/energize
     289        /usr/local/lib/xemacs-19.13/lisp/gnus
     457        /usr/local/lib/xemacs-19.13/lisp/ilisp
     1439       /usr/local/lib/xemacs-19.13/lisp/modes
     2276       /usr/local/lib/xemacs-19.13/lisp/packages
     1040       /usr/local/lib/xemacs-19.13/lisp/prim
     176        /usr/local/lib/xemacs-19.13/lisp/pcl-cvs
     154        /usr/local/lib/xemacs-19.13/lisp/rmail
     3  /usr/local/lib/xemacs-19.13/lisp/epoch
     45 /usr/local/lib/xemacs-19.13/lisp/term
     860        /usr/local/lib/xemacs-19.13/lisp/utils
     851        /usr/local/lib/xemacs-19.13/lisp/vm
     13 /usr/local/lib/xemacs-19.13/lisp/vms
     157        /usr/local/lib/xemacs-19.13/lisp/x11
     19 /usr/local/lib/xemacs-19.13/lisp/tooltalk
     14 /usr/local/lib/xemacs-19.13/lisp/sunpro
     291        /usr/local/lib/xemacs-19.13/lisp/games
     198        /usr/local/lib/xemacs-19.13/lisp/edebug
     619        /usr/local/lib/xemacs-19.13/lisp/w3
     229        /usr/local/lib/xemacs-19.13/lisp/eos
     55 /usr/local/lib/xemacs-19.13/lisp/iso
     59 /usr/local/lib/xemacs-19.13/lisp/mailcrypt
     187        /usr/local/lib/xemacs-19.13/lisp/eterm
     356        /usr/local/lib/xemacs-19.13/lisp/ediff
     408        /usr/local/lib/xemacs-19.13/lisp/hyperbole/kotl
     1262       /usr/local/lib/xemacs-19.13/lisp/hyperbole
     247        /usr/local/lib/xemacs-19.13/lisp/hm--html-menus
     161        /usr/local/lib/xemacs-19.13/lisp/mh-e
     299        /usr/local/lib/xemacs-19.13/lisp/viper
     53 /usr/local/lib/xemacs-19.13/lisp/oobr/tree-x
     4  /usr/local/lib/xemacs-19.13/lisp/oobr/tree-nx/English.lproj/DocWindow.nib
     3  /usr/local/lib/xemacs-19.13/lisp/oobr/tree-nx/English.lproj/InfoPanel.nib
     3  /usr/local/lib/xemacs-19.13/lisp/oobr/tree-nx/English.lproj/TreeView.nib
     11 /usr/local/lib/xemacs-19.13/lisp/oobr/tree-nx/English.lproj
     53 /usr/local/lib/xemacs-19.13/lisp/oobr/tree-nx
     466        /usr/local/lib/xemacs-19.13/lisp/oobr
     14142      /usr/local/lib/xemacs-19.13/lisp

     These are all Emacs Lisp source code and bytecompiled object code.
     You may safely gzip everything named *.el here.  You may remove
     any package you don't use.  _Nothing bad will happen if you delete
     a package that you do not use_.  You must be sure you do not use
     it though, so be conservative at first.

     Possible candidates for deletion include w3 (newer versions exist,
     or you may just use Lynx or Netscape for web browsing), games,
     hyperbole, mh-e, hm-html-menus (better packages exist), vm, viper,
     oobr, gnus (new versions exist), etc.  Ask yourself, _Do I ever
     want to use this package?_  If the answer is no, then it is a
     candidate for removal.

     First, gzip all the .el files.  Then go about package by package
     and start gzipping the .elc files.  Then run XEmacs and do
     whatever it is you normally do.  If nothing bad happens, then
     delete the directory.  Be conservative about deleting directories,
     and it would be handy to have a backup tape around in case you get
     too zealous.

     `prim', `modes', `packages', and `utils' are four directories you
     definitely do *not* want to delete, although certain packages can
     be removed from them if you do not use them.

          1972  /usr/local/lib/xemacs-19.13/info

     These are online texinfo sources.  You may either gzip them or
     remove them.  In either case, `C-h i' (info mode) will no longer
     work.

          20778 /usr/local/lib/xemacs-19.13

     The 20MB achieved is less than half of what the full distribution
     takes up, *and* can be achieved without deleting a single file.

   Giacomo Boffi <boffi@hp735.stru.polimi.it> provides this procedure:

     Substitute `/usr/local/lib/' with the path where the xemacs tree is
     rooted, then use this script:

          #!/bin/sh
          
          r=/usr/local/lib/xemacs-19.13/lisp
          
          cd $r ; rm -f cmpr ; touch cmpr
          
          du -s .
          
          for d in * ; do
            if test -d $d ; then
              cd $d
              for f in *.el ; do
          #     compress (remove) only (ONLY) the sources that have a
          #     corresponding compiled file --- do not (DO NOT)
          #     touch other sources
                if test -f ${f}c ; then gzip -v9 $f >> $r/cmpr ; fi
              done
              cd ..
            fi
          done
          
          du -s .

     A step beyond would be substituting `rm -f' for `gzip -v9', but
     you have to be desperate for removing the sources (remember that
     emacs can access compressed files transparently).

     Also, a good megabyte could easily be trimmed from the $r/../etc
     directory, e.g., the termcap files, some O+NEWS, others that I
     don't remember as well.

     XEmacs 21.0 will unbundle the lisp hierarchy and allow the
     installer to choose exactly how much support code gets installed.

\1f
File: xemacs-faq.info,  Node: Q2.0.3,  Next: Q2.0.4,  Prev: Q2.0.2,  Up: Installation

Q2.0.3: Compiling XEmacs with Netaudio.
---------------------------------------

   What is the best way to compile XEmacs with the netaudio system,
since I have got the netaudio system compiled but installed at a weird
place, I am not root.  Also in the READMEs it does not say anything
about compiling with the audioserver?

   You should only need to add some stuff to the configure command line.
To tell it to compile in netaudio support: `--with-sound=both', or
`--with-sound=nas' if you don't want native sound support for some
reason.) To tell it where to find the netaudio includes and libraries:

     --site-libraries=WHATEVER
     --site-includes=WHATEVER

   Then (fingers crossed) it should compile and it will use netaudio if
you have a server running corresponding to the X server. The netaudio
server has to be there when XEmacs starts. If the netaudio server goes
away and another is run, XEmacs should cope (fingers crossed, error
handling in netaudio isn't perfect).

   BTW, netaudio has been renamed as it has a name clash with something
else, so if you see references to NAS or Network Audio System, it's the
same thing.  It also might be found at
`ftp://ftp.x.org/contrib/audio/nas/'.

\1f
File: xemacs-faq.info,  Node: Q2.0.4,  Next: Q2.0.5,  Prev: Q2.0.3,  Up: Installation

Q2.0.4: Problems with Linux and ncurses.
----------------------------------------

   On Linux 1.3.98 with termcap 2.0.8 and the ncurses that came with
libc 5.2.18, XEmacs 20.0b20 is unable to open a tty device:

     src/xemacs -nw -q
     Initialization error:
     Terminal type `xterm' undefined (or can't access database?)

   Ben Wing <ben@xemacs.org> writes:

     Your ncurses configuration is messed up.  Your /usr/lib/terminfo
     is a bad pointer, perhaps to a CD-ROM that is not inserted.

\1f
File: xemacs-faq.info,  Node: Q2.0.5,  Next: Q2.0.6,  Prev: Q2.0.4,  Up: Installation

Q2.0.5: Do I need X11 to run XEmacs?
------------------------------------

   No.  The name "XEmacs" is unfortunate in the sense that it is *not*
an X Window System-only version of Emacs.  Starting with 19.14 XEmacs
has full color support on a color-capable character terminal.

\1f
File: xemacs-faq.info,  Node: Q2.0.6,  Next: Q2.0.7,  Prev: Q2.0.5,  Up: Installation

Q2.0.6: I'm having strange crashes.  What do I do?
--------------------------------------------------

   There have been a variety of reports of crashes due to compilers with
buggy optimizers.  Please see the `PROBLEMS' file that comes with
XEmacs to read what it says about your platform.

\1f
File: xemacs-faq.info,  Node: Q2.0.7,  Next: Q2.0.8,  Prev: Q2.0.6,  Up: Installation

Q2.0.7: Libraries in non-standard locations
-------------------------------------------

   I have x-faces, jpeg, xpm etc. all in different places.  I've tried
space-separated, comma-separated, several -site-libraries, all to no
avail.

     --site-libraries='/path/one /path/two /path/etc'

\1f
File: xemacs-faq.info,  Node: Q2.0.8,  Next: Q2.0.9,  Prev: Q2.0.7,  Up: Installation

Q2.0.8: can't resolve symbol _h_errno
-------------------------------------

   You are using the Linux/ELF distribution of XEmacs 19.14, and your
ELF libraries are out of date.  You have the following options:

  1. Upgrade your libc to at least 5.2.16 (better is 5.2.18, 5.3.12, or
     5.4.10).

  2. Patch the XEmacs binary by replacing all occurrences of
     `_h_errno^@' with `h_errno^@^@'.  Any version of Emacs will
     suffice.  If you don't understand how to do this, don't do it.

  3. Rebuild XEmacs yourself - any working ELF version of libc should be
     O.K.

   Hrvoje Niksic <hniksic@xemacs.org> writes:

     Why not use a Perl one-liner for No. 2?

          perl -pi -e 's/_h_errno\0/h_errno\0\0/g' \
          /usr/local/bin/xemacs-19.14

     NB: You _must_ patch `/usr/local/bin/xemacs-19.14', and not
     `xemacs' because `xemacs' is a link to `xemacs-19.14'; the Perl
     `-i' option will cause unwanted side-effects if applied to a
     symbolic link.

   SL Baur <steve@xemacs.org> writes:

     If you build against a recent libc-5.4 (late enough to have caused
     problems earlier in the beta cycle) and then run with an earlier
     version of libc, you get a

          $ xemacs
          xemacs: can't resolve symbol '__malloc_hook'
          zsh: 7942 segmentation fault (core dumped)  xemacs

     (Example binary compiled against libc-5.4.23 and run with
     libc-5.4.16).

     The solution is to upgrade to at least libc-5.4.23.  Sigh.  Drat.

\1f
File: xemacs-faq.info,  Node: Q2.0.9,  Next: Q2.0.10,  Prev: Q2.0.8,  Up: Installation

Q2.0.9: Where do I find external libraries?
-------------------------------------------

   All external libraries used by XEmacs can be found at the XEmacs FTP
site `ftp://ftp.xemacs.org/pub/xemacs/aux/'.

   The canonical locations (at the time of this writing) are as follows:

JPEG
     `ftp://ftp.uu.net/graphics/jpeg/'.  Version 6a is current.

XPM
     `ftp://ftp.x.org/contrib/libraries/'.  Version 3.4j is current.
     Older versions of this package are known to cause XEmacs crashes.

TIFF
     `ftp://ftp.sgi.com/graphics/tiff/'.  v3.4 is current.  The latest
     beta is v3.4b035.  There is a HOWTO here.

PNG
     `ftp://ftp.uu.net/graphics/png/'.  0.89c is current.  XEmacs
     requires a fairly recent version to avoid using temporary files.

     `ftp://swrinde.nde.swri.edu/pub/png/src/'

Compface
     `ftp://ftp.cs.indiana.edu/pub/faces/compface/'.  This library has
     been frozen for about 6 years, and is distributed without version
     numbers.  _It should be compiled with the same options that X11 was
     compiled with on your system_.  The version of this library at
     XEmacs.org includes the `xbm2xface.pl' script, written by
     <stig@hackvan.com>, which may be useful when generating your own
     xface.

NAS
     `ftp://ftp.x.org/contrib/audio/nas/'.  Version 1.2p5 is current.
     There is a FAQ here.

\1f
File: xemacs-faq.info,  Node: Q2.0.10,  Next: Q2.0.11,  Prev: Q2.0.9,  Up: Installation

Q2.0.10: After I run configure I find a core dump, is something wrong?
----------------------------------------------------------------------

   Not necessarily.  If you have GNU sed 3.0 you should downgrade it to
2.05.  From the `README' at prep.ai.mit.edu:

     sed 3.0 has been withdrawn from distribution.  It has major
     revisions, which mostly seem to be improvements; but it turns out
     to have bugs too which cause trouble in some common cases.

     Tom Lord won't be able to work fixing the bugs until May.  So in
     the mean time, we've decided to withdraw sed 3.0 from distribution
     and make version 2.05 once again the recommended version.

   It has also been observed that the vfork test on Solaris will leave a
core dump.

\1f
File: xemacs-faq.info,  Node: Q2.0.11,  Next: Q2.0.12,  Prev: Q2.0.10,  Up: Installation

Q2.0.11: XEmacs doesn't resolve hostnames.
------------------------------------------

   This is the result of a long-standing problem with SunOS and the fact
that stock SunOS systems do not ship with DNS resolver code in libc.

   Christopher Davis <ckd@loiosh.kei.com> writes:

     That's correct [The SunOS 4.1.3 precompiled binaries don't do name
     lookup].  Since Sun figured that everyone used NIS to do name
     lookups (that DNS thing was apparently only a passing fad,
     right?), the stock SunOS 4.x systems don't have DNS-based name
     lookups in libc.

     This is also why Netscape ships two binaries for SunOS 4.1.x.

     The best solution is to compile it yourself; the configure script
     will check to see if you've put DNS in the shared libc and will
     then proceed to link against the DNS resolver library code.

\1f
File: xemacs-faq.info,  Node: Q2.0.12,  Next: Q2.0.13,  Prev: Q2.0.11,  Up: Installation

Q2.0.12: Why can't I strip XEmacs?
----------------------------------

   Richard Cognot <cognot@fronsac.ensg.u-nancy.fr> writes:

     Because of the way XEmacs (and every other Emacsen, AFAIK) is
     built. The link gives you a bare-boned emacs (called temacs).
     temacs is then run, preloading some of the lisp files. The result
     is then dumped into a new executable, named xemacs, which will
     contain all of the preloaded lisp functions and data.

     Now, during the dump itself, the executable (code+data+symbols) is
     written on disk using a special unexec() function. This function is
     obviously heavily system dependent. And on some systems, it leads
     to an executable which, although valid, cannot be stripped without
     damage. If memory serves, this is especially the case for AIX
     binaries. On other architecture it might work OK.

     The Right Way to strip the emacs binary is to strip temacs prior to
     dumping xemacs. This will always work, although you can do that
     only if you install from sources (as temacs is `not' part of the
     binary kits).

   Nat Makarevitch <nat@nataa.fr.eu.org> writes:

     Here is the trick:

       1. [ ./configure; make ]

       2. rm src/xemacs

       3. strip src/temacs

       4. make

       5. cp src/xemacs /usr/local/bin/xemacs

       6. cp lib-src/DOC-19.16-XEmacs
          /usr/local/lib/xemacs-19.16/i586-unknown-linuxaout

\1f
File: xemacs-faq.info,  Node: Q2.0.13,  Next: Q2.0.14,  Prev: Q2.0.12,  Up: Installation

Q2.0.13: Problems linking with Gcc on Solaris
---------------------------------------------

   There are known difficulties linking with Gnu ld on Solaris.  A
typical error message might look like:

     unexec(): dlopen(../dynodump/dynodump.so): ld.so.1: ./temacs:
     fatal: relocation error:
     symbol not found: main: referenced in ../dynodump/dynodump.so

   Martin Buchholz <martin@xemacs.org> writes:

     You need to specify `-fno-gnu-linker' as part of your flags to pass
     to ld.  Future releases of XEmacs will try to do this
     automatically.

\1f
File: xemacs-faq.info,  Node: Q2.0.14,  Next: Q2.1.1,  Prev: Q2.0.13,  Up: Installation

Q2.0.14: Make on HP/UX 9 fails after linking temacs
---------------------------------------------------

   Problem when building xemacs-19.16 on hpux 9:

   Richard Cognot <cognot@ensg.u-nancy.fr> writes:

     make on hpux fails after linking temacs with a message:

          "make: don't know how to make .y."

     Solution: This is a problem with HP make revision 70.X.  Either
     use GNU make, or install PHCO_6552, which will bring make to
     revision 72.24.1.17.

\1f
File: xemacs-faq.info,  Node: Q2.1.1,  Next: Q2.1.2,  Prev: Q2.0.14,  Up: Installation

2.1: Trouble Shooting
=====================

Q2.1.1: Help!  XEmacs just crashed on me!
-----------------------------------------

   First of all, don't panic.  Whenever XEmacs crashes, it tries
extremely hard to auto-save all of your files before dying.  (The main
time that this will not happen is if the machine physically lost power
or if you killed the XEmacs process using `kill -9').  The next time
you try to edit those files, you will be informed that a more recent
auto-save file exists.  You can use `M-x recover-file' to retrieve the
auto-saved version of the file.

   Starting with 19.14, you may use the command `M-x recover-session'
after a crash to pick up where you left off.

   Now, XEmacs is not perfect, and there may occasionally be times, or
particular sequences of actions, that cause it to crash.  If you can
come up with a reproducible way of doing this (or even if you have a
pretty good memory of exactly what you were doing at the time), the
maintainers would be very interested in knowing about it.  Post a
message to comp.emacs.xemacs or send mail to <crashes@xemacs.org>.
Please note that the `crashes' address is exclusively for crash reports.

   If at all possible, include a stack backtrace of the core dump that
was produced.  This shows where exactly things went wrong, and makes it
much easier to diagnose problems.  To do this, you need to locate the
core file (it's called `core', and is usually sitting in the directory
that you started XEmacs from, or your home directory if that other
directory was not writable).  Then, go to that directory and execute a
command like:

     gdb `which xemacs` core

   and then issue the command `where' to get the stack backtrace.  You
might have to use `dbx' or some similar debugger in place of `gdb'.  If
you don't have any such debugger available, complain to your system
administrator.

   It's possible that a core file didn't get produced, in which case
you're out of luck.  Go complain to your system administrator and tell
him not to disable core files by default.  Also *Note Q2.1.15::, for
tips and techniques for dealing with a debugger.

   When making a problem report make sure that:

  1. Report *all* of the information output by XEmacs during the crash.

  2. You mention what O/S & Hardware you are running XEmacs on.

  3. What version of XEmacs you are running.

  4. What build options you are using.

  5. If the problem is related to graphics, we will also need to know
     what version of the X Window System you are running, and what
     window manager you are using.

  6. If the problem happened on a tty, please include the terminal type.

\1f
File: xemacs-faq.info,  Node: Q2.1.2,  Next: Q2.1.3,  Prev: Q2.1.1,  Up: Installation

Q2.1.2: Cryptic Minibuffer messages.
------------------------------------

   When I try to use some particular option of some particular package,
I get a cryptic error in the minibuffer.

   If you can't figure out what's going on, select Options/General
Options/Debug on Error from the Menubar and then try and make the error
happen again.  This will give you a backtrace that may be enlightening.
If not, try reading through this FAQ; if that fails, you could try
posting to comp.emacs.xemacs (making sure to include the backtrace) and
someone may be able to help.  If you can identify which Emacs lisp
source file the error is coming from you can get a more detailed stack
backtrace by doing the following:

  1. Visit the .el file in an XEmacs buffer.

  2. Issue the command `M-x eval-current-buffer'.

  3. Reproduce the error.

   Depending on the version of XEmacs, you may either select Edit->Show
Messages (19.13 and earlier) or Help->Recent Keystrokes/Messages (19.14
and later) from the menubar to see the most recent messages.  This
command is bound to `C-h l' by default.

\1f
File: xemacs-faq.info,  Node: Q2.1.3,  Next: Q2.1.4,  Prev: Q2.1.2,  Up: Installation

Q2.1.3: Translation Table Syntax messages at Startup
----------------------------------------------------

   I get tons of translation table syntax error messages during startup.
How do I get rid of them?

   There are two causes of this problem.  The first usually only strikes
people using the prebuilt binaries.  The culprit in both cases is the
file `XKeysymDB'.

   * The binary cannot find the `XKeysymDB' file.  The location is
     hardcoded at compile time so if the system the binary was built on
     puts it a different place than your system does, you have
     problems.  To fix, set the environment variable XKEYSYMDB to the
     location of the `XKeysymDB' file on your system or to the location
     of the one included with XEmacs which should be at
     `<xemacs_root_directory>/lib/xemacs-19.16/etc/XKeysymDB'.

   * The binary is finding the XKeysymDB but it is out-of-date on your
     system and does not contain the necessary lines.  Either ask your
     system administrator to replace it with the one which comes with
     XEmacs (which is the stock R6 version and is backwards compatible)
     or set your XKEYSYMDB variable to the location of XEmacs's
     described above.

\1f
File: xemacs-faq.info,  Node: Q2.1.4,  Next: Q2.1.5,  Prev: Q2.1.3,  Up: Installation

Q2.1.4: Startup warnings about deducing proper fonts?
-----------------------------------------------------

   How can I avoid the startup warnings about deducing proper fonts?

   This is highly dependent on your installation, but try with the
following font as your base font for XEmacs and see what it does:

-adobe-courier-medium-r-*-*-*-120-*-*-*-*-iso8859-1

   More precisely, do the following in your resource file:

Emacs.default.attributeFont: \
-adobe-courier-medium-r-*-*-*-120-*-*-*-*-iso8859-1

   If you just don't want to see the `*Warnings*' buffer at startup
time, you can set this:

     (setq display-warning-minimum-level 'error)

   The buffer still exists; it just isn't in your face.

\1f
File: xemacs-faq.info,  Node: Q2.1.5,  Next: Q2.1.6,  Prev: Q2.1.4,  Up: Installation

Q2.1.5: XEmacs cannot connect to my X Terminal!
-----------------------------------------------

   Help!  I can not get XEmacs to display on my Envizex X-terminal!

   Try setting the DISPLAY variable using the numeric IP address of the
host you are running XEmacs from.

\1f
File: xemacs-faq.info,  Node: Q2.1.6,  Next: Q2.1.7,  Prev: Q2.1.5,  Up: Installation

Q2.1.6: XEmacs just locked up my Linux X server!
------------------------------------------------

   There have been several reports of the X server locking up under
Linux.  In all reported cases removing speedo and scaled fonts from the
font path corrected the problem.  This can be done with the command
`xset'.

   It is possible that using a font server may also solve the problem.

\1f
File: xemacs-faq.info,  Node: Q2.1.7,  Next: Q2.1.8,  Prev: Q2.1.6,  Up: Installation

Q2.1.7: HP Alt key as Meta.
---------------------------

   How can I make XEmacs recognize the Alt key of my HP workstation as a
Meta key?

   Put the following line into a file and load it with xmodmap(1) before
starting XEmacs:

     remove Mod1 = Mode_switch

\1f
File: xemacs-faq.info,  Node: Q2.1.8,  Next: Q2.1.9,  Prev: Q2.1.7,  Up: Installation

Q2.1.8: got (wrong-type-argument color-instance-p nil)
------------------------------------------------------

   Natalie Kershaw <nataliek@rd.scitec.com.au> writes:

     I am trying to run xemacs 19.13 under X11R4. Whenever I move the
     mouse I get the following error. Has anyone seen anything like
     this? This doesn't occur on X11R5.

          Signalling:
          (error "got (wrong-type-argument color-instance-p nil)
          and I don't know why!")

   dinos <map01kd@gold.ac.uk> writes:

     I think this is due to undefined resources; You need to define
     color backgrounds and foregrounds into your
     `.../app-defaults/Emacs' like:

          *Foreground:  Black   ;everything will be of black on grey95,
          *Background:  Grey95  ;unless otherwise specified.
          *cursorColor: Red3    ;red3 cursor with grey95 border.
          *pointerColor:        Red3    ;red3 pointer with grey95 border.

   Natalie Kershaw adds:

     What fixed the problem was adding some more colors to the X color
     database (copying the X11R5 colors over), and also defining the
     following resources:

          xemacs*cursorColor:    black
          xemacs*pointerColor:   black

     With the new colors installed the problem still occurs if the above
     resources are not defined.

     If the new colors are not present then an additional error occurs
     on XEmacs startup, which says `Color Red3' not defined.

\1f
File: xemacs-faq.info,  Node: Q2.1.9,  Next: Q2.1.10,  Prev: Q2.1.8,  Up: Installation

Q2.1.9: XEmacs causes my OpenWindows 3.0 server to crash.
---------------------------------------------------------

   The OpenWindows 3.0 server is incredibly buggy.  Your best bet is to
replace it with one from the generic MIT X11 release.  You might also
try disabling parts of your `.emacs', like enabling background pixmaps.

\1f
File: xemacs-faq.info,  Node: Q2.1.10,  Next: Q2.1.11,  Prev: Q2.1.9,  Up: Installation

Q2.1.10: Warnings from incorrect key modifiers.
-----------------------------------------------

   The following information comes from the `PROBLEMS' file that comes
with XEmacs.

   If you're having troubles with HP/UX it is because HP/UX defines the
modifiers wrong in X.  Here is a shell script to fix the problem; be
sure that it is run after VUE configures the X server.

     #! /bin/sh
     xmodmap 2> /dev/null - << EOF
     keysym Alt_L = Meta_L
     keysym Alt_R = Meta_R
     EOF
     
     xmodmap - << EOF
     clear mod1
     keysym Mode_switch = NoSymbol
     add mod1 = Meta_L
     keysym Meta_R = Mode_switch
     add mod2 = Mode_switch
     EOF

\1f
File: xemacs-faq.info,  Node: Q2.1.11,  Next: Q2.1.12,  Prev: Q2.1.10,  Up: Installation

Q2.1.11: `Can't instantiate image error...' in toolbar
------------------------------------------------------

   Dr. Ram Samudrala <expt@alanine.ram.org> writes:

   I just installed the XEmacs (20.4-2) RPMS that I downloaded from
`http://www.xemacs.org/'.  Everything works fine, except that when I
place my mouse over the toolbar, it beeps and gives me this message:

      Can't instantiate image (probably cached):
      [xbm :mask-file "/usr/include/X11/bitmaps/leftptrmsk :mask-data
      (16 16 <strange control characters> ...

   Kyle Jones <kyle_jones@wonderworks.com> writes:
     This is problem specific to some Chips and Technologies video
     chips, when running XFree86.  Putting

     `Option "sw_cursor"'

     in `XF86Config' gets rid of the problem.

\1f
File: xemacs-faq.info,  Node: Q2.1.12,  Next: Q2.1.13,  Prev: Q2.1.11,  Up: Installation

Q2.1.12: Problems with Regular Expressions on DEC OSF1.
-------------------------------------------------------

   I have xemacs 19.13 running on an alpha running OSF1 V3.2 148 and
ispell would not run because it claimed the version number was incorrect
although it was indeed OK. I traced the problem to the regular
expression handler.

   Douglas Kosovic <douglask@dstc.edu.au> writes:

     Actually it's a DEC cc optimization bug that screws up the regexp
     handling in XEmacs.

     Rebuilding using the `-migrate' switch for DEC cc (which uses a
     different sort of optimization) works fine.

   See `xemacs-19_13-dunix-3_2c.patch' at the following URL on how to
build with the `-migrate' flag:

     `http://www-digital.cern.ch/carney/emacs/emacs.html'

   NOTE: There have been a variety of other problems reported that are
fixed in this fashion.

\1f
File: xemacs-faq.info,  Node: Q2.1.13,  Next: Q2.1.14,  Prev: Q2.1.12,  Up: Installation

Q2.1.13: HP/UX 10.10 and `create_process' failure.
--------------------------------------------------

   Dave Carrigan <Dave.Carrigan@ipl.ca> writes:

     With XEmacs 19.13 and HP/UX 10.10, anything that relies on the
     `create_process' function fails. This breaks a lot of things
     (shell-mode, compile, ange-ftp, to name a few).

   Phil Johnson <johnson@dtc.hp.com> writes:

     This is a problem specific to HP-UX 10.10.  It only occurs when
     XEmacs is compiled for shared libraries (the default), so you can
     work around it by compiling a statically-linked binary (run
     configure with `--dynamic=no').

     I'm not sure whether the problem is with a particular shared
     library or if it's a kernel problem which crept into 10.10.

   Richard Cognot <cognot@ensg.u-nancy.fr> writes:

     I had a few problems with 10.10. Apparently, some of them were
     solved by forcing a static link of libc (manually).

\1f
File: xemacs-faq.info,  Node: Q2.1.14,  Next: Q2.1.15,  Prev: Q2.1.13,  Up: Installation

Q2.1.14: `C-g' doesn't work for me.  Is it broken?
--------------------------------------------------

   Ben Wing <ben@xemacs.org> writes:

     `C-g' does work for most people in most circumstances.  If it
     doesn't, there are only two explanations:

       1. The code is wrapped with a binding of `inhibit-quit' to `t'.
          `Ctrl-Shift-G' should still work, I think.

       2. SIGIO is broken on your system, but BROKEN_SIGIO isn't
          defined.

     To test #2, try executing `(while t)' from the `*scratch*' buffer.
     If `C-g' doesn't interrupt, then you're seeing #2.

   Morten Welinder <terra@diku.dk> writes:

     On some (but _not_ all) machines a hung XEmacs can be revived by
     `kill -FPE <pid>'.  This is a hack, of course, not a solution.
     This technique works on a Sun4 running 4.1.3_U1.  To see if it
     works for you, start another XEmacs and test with that first.  If
     you get a core dump the method doesn't work and if you get
     `Arithmetic error' then it does.

\1f
File: xemacs-faq.info,  Node: Q2.1.15,  Next: Q2.1.16,  Prev: Q2.1.14,  Up: Installation

Q2.1.15: How to Debug an XEmacs problem with a debugger
-------------------------------------------------------

   If XEmacs does crash on you, one of the most productive things you
can do to help get the bug fixed is to poke around a bit with the
debugger.  Here are some hints:

   * First of all, if the crash is at all reproducible, consider very
     strongly recompiling your XEmacs with debugging symbols, with no
     optimization, and with the configure options `--debug=yes' and
     `--error-checking=all'.  This will make your XEmacs run somewhat
     slower but make it a lot more likely to catch the problem earlier
     (closer to its source), and a lot easier to determine what's going
     on with a debugger.

   * If you're able to run XEmacs under a debugger and reproduce the
     crash (if it's inconvenient to do this because XEmacs is already
     running or is running in batch mode as part of a bunch of scripts,
     consider attaching to the existing process with your debugger;
     most debuggers let you do this by substituting the process ID for
     the core file when you invoke the debugger from the command line,
     or by using the `attach' command or something similar), here are
     some things you can do:

   * If XEmacs is hitting an assertion failure, put a breakpoint on
     `assert_failed()'.

   * If XEmacs is hitting some weird Lisp error that's causing it to
     crash (e.g. during startup), put a breakpoint on
     `signal_1()'--this is declared static in eval.c.

   * Internally, you will probably see lots of variables that hold
     objects of type `Lisp_Object'.  These are exactly what they appear
     to be, i.e. references to Lisp objects.  Printing them out with
     the debugger probably won't be too useful--you'll likely just see
     a number.  To decode them, do this:

          call debug_print (OBJECT)

     where OBJECT is whatever you want to decode (it can be a variable,
     a function call, etc.).  This will print out a readable
     representation on the TTY from which the xemacs process was
     invoked.

   * If you want to get a Lisp backtrace showing the Lisp call stack,
     do this:

          call debug_backtrace ()

   * Using `debug_print' and `debug_backtrace' has two disadvantages -
     it can only be used with a running xemacs process, and it cannot
     display the internal C structure of a Lisp Object.  Even if all
     you've got is a core dump, all is not lost.

     If you're using GDB, there are some macros in the file
     `src/gdbinit' in the XEmacs source distribution that should make it
     easier for you to decode Lisp objects.  Copy this file to
     `~/.gdbinit', or `source' it from `~/.gdbinit', and use the macros
     defined therein.  In particular, use the `pobj' macro to print the
     internal C representation of a lisp object.  This will work with a
     core file or not-yet-run executable.  The aliases `ldp' and `lbt'
     are provided for conveniently calling `debug_print' and
     `debug_backtrace'.

     If you are using Sun's `dbx' debugger, there is an equivalent file
     `src/dbxrc' to copy to or source from `~/.dbxrc'.

   * If you're using a debugger to get a C stack backtrace and you're
     seeing stack traces with some of the innermost frames mangled, it
     may be due to dynamic linking. (This happens especially under
     Linux.) Consider reconfiguring with `--dynamic=no'.  Also,
     sometimes (again under Linux), stack backtraces of core dumps will
     have the frame where the fatal signal occurred mangled; if you can
     obtain a stack trace while running the XEmacs process under a
     debugger, the stack trace should be clean.

     Curtiss <1CMC3466@ibm.mtsac.edu> suggests upgrading to ld.so
     version 1.8 if dynamic linking and debugging is a problem on Linux.

   * If you're using a debugger to get a C stack backtrace and you're
     getting a completely mangled and bogus stack trace, it's probably
     due to one of the following:

       a. Your executable has been stripped.  Bad news.  Tell your
          sysadmin not to do this--it doesn't accomplish anything
          except to save a bit of disk space, and makes debugging much
          much harder.

       b. Your stack is getting trashed.  Debugging this is hard; you
          have to do a binary-search type of narrowing down where the
          crash occurs, until you figure out exactly which line is
          causing the problem.  Of course, this only works if the bug
          is highly reproducible.

       c. If your stack trace has exactly one frame in it, with address
          0x0, this could simply mean that XEmacs attempted to execute
          code at that address, e.g. through jumping to a null function
          pointer.  Unfortunately, under those circumstances, GDB under
          Linux doesn't know how to get a stack trace. (Yes, this is
          the third Linux-related problem I've mentioned.  I have no
          idea why GDB under Linux is so bogus.  Complain to the GDB
          authors, or to comp.os.linux.development.system).  Again,
          you'll have to use the narrowing-down process described above.

       d. If you compiled 19.14 with `--debug' (or by default in later
          versions), you will get a Lisp backtrace output when XEmacs
          crashes, so you'll have something useful.


   * If you compile with the newer gcc variants gcc-2.8 or egcs, you
     will also need gdb 4.17.  Earlier releases of gdb can't handle the
     debug information generated by the newer compilers.

   * The above information on using `src/gdbinit' works for XEmacs-21.0
     and above.  For older versions of XEmacs, there are different
     `gdbinit' files provided in the `src' directory.  Use the one
     corresponding to the configure options used when building XEmacs.


\1f
File: xemacs-faq.info,  Node: Q2.1.16,  Next: Q2.1.17,  Prev: Q2.1.15,  Up: Installation

Q2.1.16: XEmacs crashes in `strcat' on HP/UX 10
-----------------------------------------------

   From the problems database (through the former address
http://support.mayfield.hp.com/):

     Problem Report: 5003302299
     Status:         Open
     
     System/Model:   9000/700
     Product Name:   HPUX S800 10.0X
     Product Vers:   9245XB.10.00
     
     Description: strcat(3C) may read beyond
     end of source string, can cause SIGSEGV
     
     
     *** PROBLEM TEXT ***
     strcat(3C) may read beyond the source string onto an unmapped page,
     causing a segmentation violation.

\1f
File: xemacs-faq.info,  Node: Q2.1.17,  Next: Q2.1.18,  Prev: Q2.1.16,  Up: Installation

Q2.1.17: `Marker does not point anywhere'
-----------------------------------------

   As with other errors, set `debug-on-error' to `t' to get the
backtrace when the error occurs.  Specifically, two problems have been
reported (and fixed).

  1. A problem with line-number-mode in XEmacs 19.14 affected a large
     number of other packages.  If you see this error message, turn off
     line-number-mode.

  2. A problem with some early versions of Gnus 5.4 caused this error.
     Upgrade your Gnus.

\1f
File: xemacs-faq.info,  Node: Q2.1.18,  Next: Q2.1.19,  Prev: Q2.1.17,  Up: Installation

Q2.1.18: 19.14 hangs on HP/UX 10.10.
------------------------------------

   Richard Cognot <cognot@ensg.u-nancy.fr> writes:

     For the record, compiling on hpux 10.10 leads to a hang in Gnus
     when compiled with optimization on.

     I've just discovered that my hpux 10.01 binary was working less
     well than expected. In fact, on a 10.10 system, `(while t)' was not
     interrupted by `C-g'. I defined `BROKEN_SIGIO' and recompiled on
     10.10, and... the hang is now gone.

     As far as configure goes, this will be a bit tricky: `BROKEN_SIGIO'
     is needed on 10.10, but *not* on 10.01: if I run my 10.01 binary
     on a 10.01 machine, without `BROKEN_SIGIO' being defined, `C-g'
     works as expected.

   Richard Cognot <cognot@ensg.u-nancy.fr> adds:

     Apparently somebody has found the reason why there is this `poll:
     interrupted...' message for each event.  For some reason, libcurses
     reimplements a `select()' system call, in a highly broken fashion.
     The fix is to add a -lc to the link line _before_ the -lxcurses.
     XEmacs will then use the right version of `select()'.

   Alain Fauconnet <af@biomath.jussieu.fr> writes:

     The _real_ solution is to _not_ link -lcurses in!  I just changed
     -lcurses to -ltermcap in the Makefile and it fixed:

       1. The `poll: interrupted system call' message.

       2. A more serious problem I had discovered in the meantime, that
          is the fact that subprocess handling was seriously broken:
          subprocesses e.g. started by AUC TeX for TeX compilation of a
          buffer would _hang_.  Actually they would wait forever for
          emacs to read the socket which connects stdout...

\1f
File: xemacs-faq.info,  Node: Q2.1.19,  Next: Q2.1.20,  Prev: Q2.1.18,  Up: Installation

Q2.1.19: XEmacs does not follow the local timezone.
---------------------------------------------------

   When using one of the prebuilt binaries many users have observed that
XEmacs uses the timezone under which it was built, but not the timezone
under which it is running.  The solution is to add:

     (set-time-zone-rule "MET")

   to your `.emacs' or the `site-start.el' file if you can.  Replace
`MET' with your local timezone.

\1f
File: xemacs-faq.info,  Node: Q2.1.20,  Next: Q2.1.21,  Prev: Q2.1.19,  Up: Installation

Q2.1.20: `Symbol's function definition is void: hkey-help-show.'
----------------------------------------------------------------

   This is a problem with a partially loaded hyperbole.  Try adding:

     (require 'hmouse-drv)

   where you load hyperbole and the problem should go away.

\1f
File: xemacs-faq.info,  Node: Q2.1.21,  Next: Q2.1.22,  Prev: Q2.1.20,  Up: Installation

Q2.1.21: Every so often the XEmacs frame freezes
------------------------------------------------

   This problem has been fixed in 19.15, and was due to a not easily
reproducible race condition.

\1f
File: xemacs-faq.info,  Node: Q2.1.22,  Next: Q2.1.23,  Prev: Q2.1.21,  Up: Installation

Q2.1.22: XEmacs seems to take a really long time to do some things
------------------------------------------------------------------

   David Moore <dmoore@ucsd.edu> writes:

     Two things you can do:

     1) C level:

     When you see it going mad like this, you might want to use gdb
     from an 'xterm' to attach to the running process and get a stack
     trace.  To do this just run:

          gdb /path/to/xemacs/xemacs ####

     Where `####' is the process id of your xemacs, instead of
     specifying the core.  When gdb attaches, the xemacs will stop [1]
     and you can type `where' in gdb to get a stack trace as usual.  To
     get things moving again, you can just type `quit' in gdb.  It'll
     tell you the program is running and ask if you want to quit
     anyways.  Say 'y' and it'll quit and have your emacs continue from
     where it was at.

     2) Lisp level:

     Turn on debug-on-quit early on.  When you think things are going
     slow hit C-g and it may pop you in the debugger so you can see
     what routine is running.  Press `c' to get going again.

     debug-on-quit doesn't work if something's turned on inhibit-quit
     or in some other strange cases.

\1f
File: xemacs-faq.info,  Node: Q2.1.23,  Next: Q2.1.24,  Prev: Q2.1.22,  Up: Installation

Q2.1.23:  Movemail on Linux does not work for XEmacs 19.15 and later.
---------------------------------------------------------------------

   Movemail used to work fine in 19.14 but has stopped working in 19.15
and 20.x.  I am using Linux.

   SL Baur <steve@xemacs.org> writes:

     Movemail on Linux used to default to using flock file locking.
     With 19.15 and later versions it now defaults to using `.lock' file
     locking.  If this is not appropriate for your system, edit
     src/s/linux.h and uncomment the line that reads:

          #define MAIL_USE_FLOCK

\1f
File: xemacs-faq.info,  Node: Q2.1.24,  Prev: Q2.1.23,  Up: Installation

Q2.1.24:  XEmacs won't start without network. (NEW)
---------------------------------------------------

   Q2.1.23:  Movemail on Linux does not work for XEmacs 19.15 and later.

   If XEmacs starts when you're on the network, but fails when you're
not on the network, you may be missing a "localhost" entry in your
`/etc/hosts' file.  The file should contain an entry like:

     127.0.0.1        localhost

   Add that line, and XEmacs will be happy.