Usage: configure [--OPTION[=VALUE] ...] [CONFIGURATION] Set compilation and installation parameters for XEmacs, and report. Note that for most of the following options, you can explicitly enable them using `--OPTION=yes' and explicitly disable them using `--OPTION=no'. This is especially useful for auto-detected options. The option `--without-FEATURE' is a synonym for `--with-FEATURE=no'. Options marked with a (*) are auto-detected. Use colons (or quoted spaces) to separate directory names in option values which are PATHs (i.e. lists of directories). General options: --help Issue this usage message. --verbose Display the results of configure tests. --extra-verbose Display even more information, useful for debugging. Compilation options: --compiler=prog C compiler to use. --with-gcc (*) Use GCC to compile XEmacs. --without-gcc Don't use GCC to compile XEmacs. --with-gnu-make Write the Makefiles to take advantage of special features of GNU Make. (GNU Make works fine on the Makefiles even without this option. This just allows for simultaneous in-place and --srcdir building.) --cflags=FLAGS Compiler flags (such as -O) --cpp=prog C preprocessor to use (e.g. /usr/ccs/lib/cpp or cc -E) --cppflags=FLAGS C preprocessor flags (e.g. -I/foo or -Dfoo=bar) --libs=LIBS Additional libraries (e.g. -lfoo) --ldflags=FLAGS Additional linker flags (e.g. -L/foo) --site-includes=PATH List of directories to search first for header files. --site-libraries=PATH List of directories to search first for libraries. --site-prefixes=PATH List of directories to search for include/ and lib/ subdirectories, just after 'site-includes' and 'site-libraries'. --site-runtime-libraries=PATH List of ALL directories to search for dynamically linked libraries at run time. --dynamic=yes Link dynamically if supported by system. --dynamic=no Force static linking on systems where dynamic linking is the default. --srcdir=DIR Look for the XEmacs source files in DIR. See also --with-gnu-make. --use-indexed-lrecord-implementation --use-minimal-tagbits --gung-ho Build with new-style Lisp_Objects. Equivalent to both of the 2 previous options combined. Installation options: --prefix=DIR Install files below DIR. Defaults to `/usr/local'. Window-system options: --with-x11 (*) Support the X Window System. --without-x11 Don't support X. --x-includes=DIR Search for X header files in DIR. --x-libraries=DIR Search for X libraries in DIR. --without-toolbars Don't compile with any toolbar support. --without-session Compile without realized leader window which will keep the WM_COMMAND property. Required for proper session-management. --with-menubars=TYPE Use TYPE menubars (lucid, motif, or no). The Lucid widgets emulate Motif (mostly) but are faster. *WARNING* The Motif menubar is currently broken. --with-scrollbars=TYPE Use TYPE scrollbars (lucid, motif, athena, athena3d, or no). --with-dialogs=TYPE Use TYPE dialog boxes (motif, athena, athena3d, or no). Lucid menubars and scrollbars are the default. Motif dialog boxes will be used if Motif can be found. --with-dragndrop (*) Compile in the generic drag and drop API. This is automatically added if one of the drag and drop protocols is found (currently CDE, OffiX, MSWindows). *WARNING* The Drag'n'drop support is under development and is considered experimental. --with-cde (*) Compile in support for CDE drag and drop. --with-offix (*) Compile in support for OffiX drag and drop. *WARNING* If you compile in OffiX, you may not be able to use multiple X displays success- fully. If the two servers are from different vendors, the results may be unpredictable. --without-xmu (*) For those unfortunates whose vendors don't ship Xmu. --external-widget Compile with external widget support. --with-xpm (*) Compile with support for XPM files. It is highly recommended that you obtain XPM (version 3.4h or better) if you don't already have it. Get it from the XEmacs FTP site. --with-xface (*) Compile with support for X-Face mail header conversion. Requires the compface library. Get it from the XEmacs FTP site. --without-gif Compile without the built-in support for GIF image conversion. --with-jpeg (*) Compile with support for JPEG image conversion. Requires libjpeg from the Independent JPEG Group. Get it from the XEmacs FTP site. --with-png (*) Compile with support for PNG image conversion. Requires libpng. Get it from the XEmacs FTP site. --with-tiff (*) Compile with support for TIFF image conversion. Requires Sam Lefflier's libtiff library. Get if from the XEmacs FTP site. TTY options: --without-tty Don't support TTY-s. --with-ncurses (*) Use the ncurses library for tty support. --with-gpm (*) Compile in support for General Purpose Mouse. Additional features: --with-tooltalk (*) Support the ToolTalk IPC protocol. --with-workshop Support the Sun WorkShop (formerly Sparcworks) development environment. --with-socks Compile with support for SOCKS (an Internet proxy). --with-database=TYPE (*) Compile with database support. Valid types are `no' or a comma-separated list of one or more of `dbm', `gnudbm', or `berkdb'. --with-sound=native (*) Compile with native sound support. --with-sound=nas Compile with network sound support. --with-sound=both Compile with native and network sound support. --native-sound-lib=LIB Native sound support library. Needed on Suns with --with-sound=both because both sound libraries are called libaudio. --with-pop support POP for mail retrieval --with-kerberos support Kerberos-authenticated POP --with-hesiod support Hesiod to get the POP server host --with-dnet (*) Compile with support for DECnet. --with-ldap (*) Compile with support for the LDAP protocol (requires installed LDAP libraries on the system). --mail-locking=TYPE (*) Specify the locking to be used by movemail to prevent concurrent updates of mail spool files. Valid types are `lockf', `flock', and `file'. --with-site-lisp Allow for a site-lisp directory in the XEmacs hierarchy searched before the installation packages. --package-path=PATH Directories to search for packages to dump with xemacs. PATH splits into three parts separated by double colons (::), an early, a late, and a last part, corresponding to their position in the various system paths: The early part is always first, the late part somewhere in the middle, and the last part at the very back. Only the late part gets seen at dump time. If PATH has only one component, that component is late. If PATH has two components, the first is early, the second is late. --infodir=DIR Directory to install the XEmacs Info manuals and dir in. --infopath=PATH Directories to search for Info documents, info dir and localdir files in case run-time searching for them fails. Internationalization options: --with-mule Compile with Mule (MUlti-Lingual Emacs) support, needed to support non-Latin-1 (including Asian) languages. --with-xim=xlib Compile with support for X input methods, --with-xim=motif (*) Used in conjunction with Mule support. Use either raw Xlib to provide XIM support, or the Motif XmIm* routines (when available). NOTE: On some systems bugs in X11's XIM support will cause XEmacs to crash, so by default, no XIM support is compiled in, unless running on Solaris and the XmIm* routines are detected. --with-canna (*) Compile with support for Canna (a Japanese input method used in conjunction with Mule support). --with-wnn (*) Compile with support for WNN (a multi-language input method used in conjunction with Mule support). --with-wnn6 (*) Compile with support for the comercial package WNN version 6 --with-i18n3 Compile with I18N level 3 (support for message translation). This doesn't currently work. --with-xfs Compile with XFontSet support for bilingual menubar. Can't use this option with --with-xim=motif or xlib. And should have --with-menubars=lucid. Debugging options: --debug Compile with support for debugging XEmacs. (Causes code-size increase and little loss of speed.) --error-checking=TYPE[,TYPE]... Compile with internal error-checking added. Causes noticeable loss of speed. Valid types are extents, bufpos, malloc, gc, typecheck. --error-checking=none Disable all internal error-checking (the default). --error-checking=all Enable all internal error-checking. --memory-usage-stats Compile with additional code to allow you to determine what XEmacs's memory is being used for. Causes a small code increase but no loss of speed. Normally enabled when --debug is given. --no-doc-file Don't rebuild the DOC file unless it's explicitly deleted. Only use during development. (It speeds up the compile-run-test cycle.) --use-union-type Enable or disable use of a union, instead of an int, for the fundamental Lisp_Object type; this provides stricter type-checking. Only works with some systems and compilers. Other options: --puresize=VALUE Override default amount of space for pure Lisp code. --rel-alloc Use the relocating allocator (default for this option is system-dependent). --with-dlmalloc Control usage of Doug Lea malloc on systems that have it in the standard C library (default is to use it if it is available). --with-clash-detection Use lock files to detect multiple edits of the same file. The default is to not do clash detection. --lockdir=DIR The directory to put clash detection files in, such as `/var/lock/emacs'. Defaults to `${statedir}/xemacs/lock'. --with-system-malloc Force use of the system malloc, rather than GNU malloc. --with-debug-malloc Use the debugging malloc package. You may also specify any of the `path' variables found in Makefile.in, including --bindir, --libdir, --lispdir, --sitelispdir, --datadir, --infodir, --mandir and so on. Note that we recommend against explicitly setting any of these variables. See the INSTALL file for a complete list plus the reasons we advise not changing them. If successful, configure leaves its status in config.status. If unsuccessful after disturbing the status quo, it removes config.status. The configure script also recognizes some environment variables, each of which is equivalent to a corresponding configure flag. A specified configure flag always overrides the environment variable. envvar configure flag ----- -------------- CC --compiler CPP --cpp CFLAGS --cflags CPPFLAGS --cppflags LDFLAGS --ldflags LIBS --libs LD_RUN_PATH --site-runtime-libraries For more details on the install process, consult the INSTALL file.