This is Info file ../../info/lispref.info, produced by Makeinfo version 1.68 from the input file lispref.texi. INFO-DIR-SECTION XEmacs Editor START-INFO-DIR-ENTRY * Lispref: (lispref). XEmacs Lisp Reference Manual. END-INFO-DIR-ENTRY Edition History: GNU Emacs Lisp Reference Manual Second Edition (v2.01), May 1993 GNU Emacs Lisp Reference Manual Further Revised (v2.02), August 1993 Lucid Emacs Lisp Reference Manual (for 19.10) First Edition, March 1994 XEmacs Lisp Programmer's Manual (for 19.12) Second Edition, April 1995 GNU Emacs Lisp Reference Manual v2.4, June 1995 XEmacs Lisp Programmer's Manual (for 19.13) Third Edition, July 1995 XEmacs Lisp Reference Manual (for 19.14 and 20.0) v3.1, March 1996 XEmacs Lisp Reference Manual (for 19.15 and 20.1, 20.2, 20.3) v3.2, April, May, November 1997 XEmacs Lisp Reference Manual (for 21.0) v3.3, April 1998 Copyright (C) 1990, 1991, 1992, 1993, 1994, 1995 Free Software Foundation, Inc. Copyright (C) 1994, 1995 Sun Microsystems, Inc. Copyright (C) 1995, 1996 Ben Wing. Permission is granted to make and distribute verbatim copies of this manual provided the copyright notice and this permission notice are preserved on all copies. Permission is granted to copy and distribute modified versions of this manual under the conditions for verbatim copying, provided that the entire resulting derived work is distributed under the terms of a permission notice identical to this one. Permission is granted to copy and distribute translations of this manual into another language, under the above conditions for modified versions, except that this permission notice may be stated in a translation approved by the Foundation. Permission is granted to copy and distribute modified versions of this manual under the conditions for verbatim copying, provided also that the section entitled "GNU General Public License" is included exactly as in the original, and provided that the entire resulting derived work is distributed under the terms of a permission notice identical to this one. Permission is granted to copy and distribute translations of this manual into another language, under the above conditions for modified versions, except that the section entitled "GNU General Public License" may be included in a translation approved by the Free Software Foundation instead of in the original English.  File: lispref.info, Node: Entire Match Data, Next: Saving Match Data, Prev: Replacing Match, Up: Match Data Accessing the Entire Match Data ------------------------------- The functions `match-data' and `set-match-data' read or write the entire match data, all at once. - Function: match-data This function returns a newly constructed list containing all the information on what text the last search matched. Element zero is the position of the beginning of the match for the whole expression; element one is the position of the end of the match for the expression. The next two elements are the positions of the beginning and end of the match for the first subexpression, and so on. In general, element number 2N corresponds to `(match-beginning N)'; and element number 2N + 1 corresponds to `(match-end N)'. All the elements are markers or `nil' if matching was done on a buffer, and all are integers or `nil' if matching was done on a string with `string-match'. (In Emacs 18 and earlier versions, markers were used even for matching on a string, except in the case of the integer 0.) As always, there must be no possibility of intervening searches between the call to a search function and the call to `match-data' that is intended to access the match data for that search. (match-data) => (# # # #) - Function: set-match-data MATCH-LIST This function sets the match data from the elements of MATCH-LIST, which should be a list that was the value of a previous call to `match-data'. If MATCH-LIST refers to a buffer that doesn't exist, you don't get an error; that sets the match data in a meaningless but harmless way. `store-match-data' is an alias for `set-match-data'.  File: lispref.info, Node: Saving Match Data, Prev: Entire Match Data, Up: Match Data Saving and Restoring the Match Data ----------------------------------- When you call a function that may do a search, you may need to save and restore the match data around that call, if you want to preserve the match data from an earlier search for later use. Here is an example that shows the problem that arises if you fail to save the match data: (re-search-forward "The \\(cat \\)") => 48 (foo) ; Perhaps `foo' does ; more searching. (match-end 0) => 61 ; Unexpected result--not 48! You can save and restore the match data with `save-match-data': - Macro: save-match-data BODY... This special form executes BODY, saving and restoring the match data around it. You can use `set-match-data' together with `match-data' to imitate the effect of the special form `save-match-data'. This is useful for writing code that can run in Emacs 18. Here is how: (let ((data (match-data))) (unwind-protect ... ; May change the original match data. (set-match-data data))) Emacs automatically saves and restores the match data when it runs process filter functions (*note Filter Functions::.) and process sentinels (*note Sentinels::.).  File: lispref.info, Node: Searching and Case, Next: Standard Regexps, Prev: Match Data, Up: Searching and Matching Searching and Case ================== By default, searches in Emacs ignore the case of the text they are searching through; if you specify searching for `FOO', then `Foo' or `foo' is also considered a match. Regexps, and in particular character sets, are included: thus, `[aB]' would match `a' or `A' or `b' or `B'. If you do not want this feature, set the variable `case-fold-search' to `nil'. Then all letters must match exactly, including case. This is a buffer-local variable; altering the variable affects only the current buffer. (*Note Intro to Buffer-Local::.) Alternatively, you may change the value of `default-case-fold-search', which is the default value of `case-fold-search' for buffers that do not override it. Note that the user-level incremental search feature handles case distinctions differently. When given a lower case letter, it looks for a match of either case, but when given an upper case letter, it looks for an upper case letter only. But this has nothing to do with the searching functions Lisp functions use. - User Option: case-replace This variable determines whether the replacement functions should preserve case. If the variable is `nil', that means to use the replacement text verbatim. A non-`nil' value means to convert the case of the replacement text according to the text being replaced. The function `replace-match' is where this variable actually has its effect. *Note Replacing Match::. - User Option: case-fold-search This buffer-local variable determines whether searches should ignore case. If the variable is `nil' they do not ignore case; otherwise they do ignore case. - Variable: default-case-fold-search The value of this variable is the default value for `case-fold-search' in buffers that do not override it. This is the same as `(default-value 'case-fold-search)'.  File: lispref.info, Node: Standard Regexps, Prev: Searching and Case, Up: Searching and Matching Standard Regular Expressions Used in Editing ============================================ This section describes some variables that hold regular expressions used for certain purposes in editing: - Variable: page-delimiter This is the regexp describing line-beginnings that separate pages. The default value is `"^\014"' (i.e., `"^^L"' or `"^\C-l"'); this matches a line that starts with a formfeed character. The following two regular expressions should *not* assume the match always starts at the beginning of a line; they should not use `^' to anchor the match. Most often, the paragraph commands do check for a match only at the beginning of a line, which means that `^' would be superfluous. When there is a nonzero left margin, they accept matches that start after the left margin. In that case, a `^' would be incorrect. However, a `^' is harmless in modes where a left margin is never used. - Variable: paragraph-separate This is the regular expression for recognizing the beginning of a line that separates paragraphs. (If you change this, you may have to change `paragraph-start' also.) The default value is `"[ \t\f]*$"', which matches a line that consists entirely of spaces, tabs, and form feeds (after its left margin). - Variable: paragraph-start This is the regular expression for recognizing the beginning of a line that starts *or* separates paragraphs. The default value is `"[ \t\n\f]"', which matches a line starting with a space, tab, newline, or form feed (after its left margin). - Variable: sentence-end This is the regular expression describing the end of a sentence. (All paragraph boundaries also end sentences, regardless.) The default value is: "[.?!][]\"')}]*\\($\\| $\\|\t\\| \\)[ \t\n]*" This means a period, question mark or exclamation mark, followed optionally by a closing parenthetical character, followed by tabs, spaces or new lines. For a detailed explanation of this regular expression, see *Note Regexp Example::.  File: lispref.info, Node: Syntax Tables, Next: Abbrevs, Prev: Searching and Matching, Up: Top Syntax Tables ************* A "syntax table" specifies the syntactic textual function of each character. This information is used by the parsing commands, the complex movement commands, and others to determine where words, symbols, and other syntactic constructs begin and end. The current syntax table controls the meaning of the word motion functions (*note Word Motion::.) and the list motion functions (*note List Motion::.) as well as the functions in this chapter. * Menu: * Basics: Syntax Basics. Basic concepts of syntax tables. * Desc: Syntax Descriptors. How characters are classified. * Syntax Table Functions:: How to create, examine and alter syntax tables. * Motion and Syntax:: Moving over characters with certain syntaxes. * Parsing Expressions:: Parsing balanced expressions using the syntax table. * Standard Syntax Tables:: Syntax tables used by various major modes. * Syntax Table Internals:: How syntax table information is stored.  File: lispref.info, Node: Syntax Basics, Next: Syntax Descriptors, Up: Syntax Tables Syntax Table Concepts ===================== A "syntax table" provides Emacs with the information that determines the syntactic use of each character in a buffer. This information is used by the parsing commands, the complex movement commands, and others to determine where words, symbols, and other syntactic constructs begin and end. The current syntax table controls the meaning of the word motion functions (*note Word Motion::.) and the list motion functions (*note List Motion::.) as well as the functions in this chapter. Under XEmacs 20, a syntax table is a particular subtype of the primitive char table type (*note Char Tables::.), and each element of the char table is an integer that encodes the syntax of the character in question, or a cons of such an integer and a matching character (for characters with parenthesis syntax). Under XEmacs 19, a syntax table is a vector of 256 elements; it contains one entry for each of the 256 possible characters in an 8-bit byte. Each element is an integer that encodes the syntax of the character in question. (The matching character, if any, is embedded in the bits of this integer.) Syntax tables are used only for moving across text, not for the Emacs Lisp reader. XEmacs Lisp uses built-in syntactic rules when reading Lisp expressions, and these rules cannot be changed. Each buffer has its own major mode, and each major mode has its own idea of the syntactic class of various characters. For example, in Lisp mode, the character `;' begins a comment, but in C mode, it terminates a statement. To support these variations, XEmacs makes the choice of syntax table local to each buffer. Typically, each major mode has its own syntax table and installs that table in each buffer that uses that mode. Changing this table alters the syntax in all those buffers as well as in any buffers subsequently put in that mode. Occasionally several similar modes share one syntax table. *Note Example Major Modes::, for an example of how to set up a syntax table. A syntax table can inherit the data for some characters from the standard syntax table, while specifying other characters itself. The "inherit" syntax class means "inherit this character's syntax from the standard syntax table." Most major modes' syntax tables inherit the syntax of character codes 0 through 31 and 128 through 255. This is useful with character sets such as ISO Latin-1 that have additional alphabetic characters in the range 128 to 255. Just changing the standard syntax for these characters affects all major modes. - Function: syntax-table-p OBJECT This function returns `t' if OBJECT is a vector of length 256 elements. This means that the vector may be a syntax table. However, according to this test, any vector of length 256 is considered to be a syntax table, no matter what its contents.  File: lispref.info, Node: Syntax Descriptors, Next: Syntax Table Functions, Prev: Syntax Basics, Up: Syntax Tables Syntax Descriptors ================== This section describes the syntax classes and flags that denote the syntax of a character, and how they are represented as a "syntax descriptor", which is a Lisp string that you pass to `modify-syntax-entry' to specify the desired syntax. XEmacs defines a number of "syntax classes". Each syntax table puts each character into one class. There is no necessary relationship between the class of a character in one syntax table and its class in any other table. Each class is designated by a mnemonic character, which serves as the name of the class when you need to specify a class. Usually the designator character is one that is frequently in that class; however, its meaning as a designator is unvarying and independent of what syntax that character currently has. A syntax descriptor is a Lisp string that specifies a syntax class, a matching character (used only for the parenthesis classes) and flags. The first character is the designator for a syntax class. The second character is the character to match; if it is unused, put a space there. Then come the characters for any desired flags. If no matching character or flags are needed, one character is sufficient. For example, the descriptor for the character `*' in C mode is `. 23' (i.e., punctuation, matching character slot unused, second character of a comment-starter, first character of an comment-ender), and the entry for `/' is `. 14' (i.e., punctuation, matching character slot unused, first character of a comment-starter, second character of a comment-ender). * Menu: * Syntax Class Table:: Table of syntax classes. * Syntax Flags:: Additional flags each character can have.  File: lispref.info, Node: Syntax Class Table, Next: Syntax Flags, Up: Syntax Descriptors Table of Syntax Classes ----------------------- Here is a table of syntax classes, the characters that stand for them, their meanings, and examples of their use. - Syntax class: whitespace character "Whitespace characters" (designated with ` ' or `-') separate symbols and words from each other. Typically, whitespace characters have no other syntactic significance, and multiple whitespace characters are syntactically equivalent to a single one. Space, tab, newline and formfeed are almost always classified as whitespace. - Syntax class: word constituent "Word constituents" (designated with `w') are parts of normal English words and are typically used in variable and command names in programs. All upper- and lower-case letters, and the digits, are typically word constituents. - Syntax class: symbol constituent "Symbol constituents" (designated with `_') are the extra characters that are used in variable and command names along with word constituents. For example, the symbol constituents class is used in Lisp mode to indicate that certain characters may be part of symbol names even though they are not part of English words. These characters are `$&*+-_<>'. In standard C, the only non-word-constituent character that is valid in symbols is underscore (`_'). - Syntax class: punctuation character "Punctuation characters" (`.') are those characters that are used as punctuation in English, or are used in some way in a programming language to separate symbols from one another. Most programming language modes, including Emacs Lisp mode, have no characters in this class since the few characters that are not symbol or word constituents all have other uses. - Syntax class: open parenthesis character - Syntax class: close parenthesis character Open and close "parenthesis characters" are characters used in dissimilar pairs to surround sentences or expressions. Such a grouping is begun with an open parenthesis character and terminated with a close. Each open parenthesis character matches a particular close parenthesis character, and vice versa. Normally, XEmacs indicates momentarily the matching open parenthesis when you insert a close parenthesis. *Note Blinking::. The class of open parentheses is designated with `(', and that of close parentheses with `)'. In English text, and in C code, the parenthesis pairs are `()', `[]', and `{}'. In XEmacs Lisp, the delimiters for lists and vectors (`()' and `[]') are classified as parenthesis characters. - Syntax class: string quote "String quote characters" (designated with `"') are used in many languages, including Lisp and C, to delimit string constants. The same string quote character appears at the beginning and the end of a string. Such quoted strings do not nest. The parsing facilities of XEmacs consider a string as a single token. The usual syntactic meanings of the characters in the string are suppressed. The Lisp modes have two string quote characters: double-quote (`"') and vertical bar (`|'). `|' is not used in XEmacs Lisp, but it is used in Common Lisp. C also has two string quote characters: double-quote for strings, and single-quote (`'') for character constants. English text has no string quote characters because English is not a programming language. Although quotation marks are used in English, we do not want them to turn off the usual syntactic properties of other characters in the quotation. - Syntax class: escape An "escape character" (designated with `\') starts an escape sequence such as is used in C string and character constants. The character `\' belongs to this class in both C and Lisp. (In C, it is used thus only inside strings, but it turns out to cause no trouble to treat it this way throughout C code.) Characters in this class count as part of words if `words-include-escapes' is non-`nil'. *Note Word Motion::. - Syntax class: character quote A "character quote character" (designated with `/') quotes the following character so that it loses its normal syntactic meaning. This differs from an escape character in that only the character immediately following is ever affected. Characters in this class count as part of words if `words-include-escapes' is non-`nil'. *Note Word Motion::. This class is used for backslash in TeX mode. - Syntax class: paired delimiter "Paired delimiter characters" (designated with `$') are like string quote characters except that the syntactic properties of the characters between the delimiters are not suppressed. Only TeX mode uses a paired delimiter presently--the `$' that both enters and leaves math mode. - Syntax class: expression prefix An "expression prefix operator" (designated with `'') is used for syntactic operators that are part of an expression if they appear next to one. These characters in Lisp include the apostrophe, `'' (used for quoting), the comma, `,' (used in macros), and `#' (used in the read syntax for certain data types). - Syntax class: comment starter - Syntax class: comment ender The "comment starter" and "comment ender" characters are used in various languages to delimit comments. These classes are designated with `<' and `>', respectively. English text has no comment characters. In Lisp, the semicolon (`;') starts a comment and a newline or formfeed ends one. - Syntax class: inherit This syntax class does not specify a syntax. It says to look in the standard syntax table to find the syntax of this character. The designator for this syntax code is `@'.  File: lispref.info, Node: Syntax Flags, Prev: Syntax Class Table, Up: Syntax Descriptors Syntax Flags ------------ In addition to the classes, entries for characters in a syntax table can include flags. There are six possible flags, represented by the characters `1', `2', `3', `4', `b' and `p'. All the flags except `p' are used to describe multi-character comment delimiters. The digit flags indicate that a character can *also* be part of a comment sequence, in addition to the syntactic properties associated with its character class. The flags are independent of the class and each other for the sake of characters such as `*' in C mode, which is a punctuation character, *and* the second character of a start-of-comment sequence (`/*'), *and* the first character of an end-of-comment sequence (`*/'). The flags for a character C are: * `1' means C is the start of a two-character comment-start sequence. * `2' means C is the second character of such a sequence. * `3' means C is the start of a two-character comment-end sequence. * `4' means C is the second character of such a sequence. * `b' means that C as a comment delimiter belongs to the alternative "b" comment style. Emacs supports two comment styles simultaneously in any one syntax table. This is for the sake of C++. Each style of comment syntax has its own comment-start sequence and its own comment-end sequence. Each comment must stick to one style or the other; thus, if it starts with the comment-start sequence of style "b", it must also end with the comment-end sequence of style "b". The two comment-start sequences must begin with the same character; only the second character may differ. Mark the second character of the "b"-style comment-start sequence with the `b' flag. A comment-end sequence (one or two characters) applies to the "b" style if its first character has the `b' flag set; otherwise, it applies to the "a" style. The appropriate comment syntax settings for C++ are as follows: `/' `124b' `*' `23' newline `>b' This defines four comment-delimiting sequences: `/*' This is a comment-start sequence for "a" style because the second character, `*', does not have the `b' flag. `//' This is a comment-start sequence for "b" style because the second character, `/', does have the `b' flag. `*/' This is a comment-end sequence for "a" style because the first character, `*', does not have the `b' flag newline This is a comment-end sequence for "b" style, because the newline character has the `b' flag. * `p' identifies an additional "prefix character" for Lisp syntax. These characters are treated as whitespace when they appear between expressions. When they appear within an expression, they are handled according to their usual syntax codes. The function `backward-prefix-chars' moves back over these characters, as well as over characters whose primary syntax class is prefix (`''). *Note Motion and Syntax::.  File: lispref.info, Node: Syntax Table Functions, Next: Motion and Syntax, Prev: Syntax Descriptors, Up: Syntax Tables Syntax Table Functions ====================== In this section we describe functions for creating, accessing and altering syntax tables. - Function: make-syntax-table &optional TABLE This function creates a new syntax table. Character codes 0 through 31 and 128 through 255 are set up to inherit from the standard syntax table. The other character codes are set up by copying what the standard syntax table says about them. Most major mode syntax tables are created in this way. - Function: copy-syntax-table &optional TABLE This function constructs a copy of TABLE and returns it. If TABLE is not supplied (or is `nil'), it returns a copy of the current syntax table. Otherwise, an error is signaled if TABLE is not a syntax table. - Command: modify-syntax-entry CHAR SYNTAX-DESCRIPTOR &optional TABLE This function sets the syntax entry for CHAR according to SYNTAX-DESCRIPTOR. The syntax is changed only for TABLE, which defaults to the current buffer's syntax table, and not in any other syntax table. The argument SYNTAX-DESCRIPTOR specifies the desired syntax; this is a string beginning with a class designator character, and optionally containing a matching character and flags as well. *Note Syntax Descriptors::. This function always returns `nil'. The old syntax information in the table for this character is discarded. An error is signaled if the first character of the syntax descriptor is not one of the twelve syntax class designator characters. An error is also signaled if CHAR is not a character. Examples: ;; Put the space character in class whitespace. (modify-syntax-entry ?\ " ") => nil ;; Make `$' an open parenthesis character, ;; with `^' as its matching close. (modify-syntax-entry ?$ "(^") => nil ;; Make `^' a close parenthesis character, ;; with `$' as its matching open. (modify-syntax-entry ?^ ")$") => nil ;; Make `/' a punctuation character, ;; the first character of a start-comment sequence, ;; and the second character of an end-comment sequence. ;; This is used in C mode. (modify-syntax-entry ?/ ". 14") => nil - Function: char-syntax CHARACTER This function returns the syntax class of CHARACTER, represented by its mnemonic designator character. This *only* returns the class, not any matching parenthesis or flags. An error is signaled if CHAR is not a character. The following examples apply to C mode. The first example shows that the syntax class of space is whitespace (represented by a space). The second example shows that the syntax of `/' is punctuation. This does not show the fact that it is also part of comment-start and -end sequences. The third example shows that open parenthesis is in the class of open parentheses. This does not show the fact that it has a matching character, `)'. (char-to-string (char-syntax ?\ )) => " " (char-to-string (char-syntax ?/)) => "." (char-to-string (char-syntax ?\()) => "(" - Function: set-syntax-table TABLE &optional BUFFER This function makes TABLE the syntax table for BUFFER, which defaults to the current buffer if omitted. It returns TABLE. - Function: syntax-table &optional BUFFER This function returns the syntax table for BUFFER, which defaults to the current buffer if omitted.  File: lispref.info, Node: Motion and Syntax, Next: Parsing Expressions, Prev: Syntax Table Functions, Up: Syntax Tables Motion and Syntax ================= This section describes functions for moving across characters in certain syntax classes. None of these functions exists in Emacs version 18 or earlier. - Function: skip-syntax-forward SYNTAXES &optional LIMIT BUFFER This function moves point forward across characters having syntax classes mentioned in SYNTAXES. It stops when it encounters the end of the buffer, or position LIMIT (if specified), or a character it is not supposed to skip. Optional argument BUFFER defaults to the current buffer if omitted. - Function: skip-syntax-backward SYNTAXES &optional LIMIT BUFFER This function moves point backward across characters whose syntax classes are mentioned in SYNTAXES. It stops when it encounters the beginning of the buffer, or position LIMIT (if specified), or a character it is not supposed to skip. Optional argument BUFFER defaults to the current buffer if omitted. - Function: backward-prefix-chars &optional BUFFER This function moves point backward over any number of characters with expression prefix syntax. This includes both characters in the expression prefix syntax class, and characters with the `p' flag. Optional argument BUFFER defaults to the current buffer if omitted.  File: lispref.info, Node: Parsing Expressions, Next: Standard Syntax Tables, Prev: Motion and Syntax, Up: Syntax Tables Parsing Balanced Expressions ============================ Here are several functions for parsing and scanning balanced expressions, also known as "sexps", in which parentheses match in pairs. The syntax table controls the interpretation of characters, so these functions can be used for Lisp expressions when in Lisp mode and for C expressions when in C mode. *Note List Motion::, for convenient higher-level functions for moving over balanced expressions. - Function: parse-partial-sexp START LIMIT &optional TARGET-DEPTH STOP-BEFORE STATE STOP-COMMENT BUFFER This function parses a sexp in the current buffer starting at START, not scanning past LIMIT. It stops at position LIMIT or when certain criteria described below are met, and sets point to the location where parsing stops. It returns a value describing the status of the parse at the point where it stops. If STATE is `nil', START is assumed to be at the top level of parenthesis structure, such as the beginning of a function definition. Alternatively, you might wish to resume parsing in the middle of the structure. To do this, you must provide a STATE argument that describes the initial status of parsing. If the third argument TARGET-DEPTH is non-`nil', parsing stops if the depth in parentheses becomes equal to TARGET-DEPTH. The depth starts at 0, or at whatever is given in STATE. If the fourth argument STOP-BEFORE is non-`nil', parsing stops when it comes to any character that starts a sexp. If STOP-COMMENT is non-`nil', parsing stops when it comes to the start of a comment. The fifth argument STATE is an eight-element list of the same form as the value of this function, described below. The return value of one call may be used to initialize the state of the parse on another call to `parse-partial-sexp'. The result is a list of eight elements describing the final state of the parse: 0. The depth in parentheses, counting from 0. 1. The character position of the start of the innermost parenthetical grouping containing the stopping point; `nil' if none. 2. The character position of the start of the last complete subexpression terminated; `nil' if none. 3. Non-`nil' if inside a string. More precisely, this is the character that will terminate the string. 4. `t' if inside a comment (of either style). 5. `t' if point is just after a quote character. 6. The minimum parenthesis depth encountered during this scan. 7. `t' if inside a comment of style "b". Elements 0, 3, 4, 5 and 7 are significant in the argument STATE. This function is most often used to compute indentation for languages that have nested parentheses. - Function: scan-lists FROM COUNT DEPTH &optional BUFFER NOERROR This function scans forward COUNT balanced parenthetical groupings from character number FROM. It returns the character position where the scan stops. If DEPTH is nonzero, parenthesis depth counting begins from that value. The only candidates for stopping are places where the depth in parentheses becomes zero; `scan-lists' counts COUNT such places and then stops. Thus, a positive value for DEPTH means go out DEPTH levels of parenthesis. Scanning ignores comments if `parse-sexp-ignore-comments' is non-`nil'. If the scan reaches the beginning or end of the buffer (or its accessible portion), and the depth is not zero, an error is signaled. If the depth is zero but the count is not used up, `nil' is returned. If optional arg BUFFER is non-`nil', scanning occurs in that buffer instead of in the current buffer. If optional arg NOERROR is non-`nil', `scan-lists' will return `nil' instead of signalling an error. - Function: scan-sexps FROM COUNT &optional BUFFER NOERROR This function scans forward COUNT sexps from character position FROM. It returns the character position where the scan stops. Scanning ignores comments if `parse-sexp-ignore-comments' is non-`nil'. If the scan reaches the beginning or end of (the accessible part of) the buffer in the middle of a parenthetical grouping, an error is signaled. If it reaches the beginning or end between groupings but before count is used up, `nil' is returned. If optional arg BUFFER is non-`nil', scanning occurs in that buffer instead of in the current buffer. If optional arg NOERROR is non-`nil', `scan-sexps' will return nil instead of signalling an error. - Variable: parse-sexp-ignore-comments If the value is non-`nil', then comments are treated as whitespace by the functions in this section and by `forward-sexp'. In older Emacs versions, this feature worked only when the comment terminator is something like `*/', and appears only to end a comment. In languages where newlines terminate comments, it was necessary make this variable `nil', since not every newline is the end of a comment. This limitation no longer exists. You can use `forward-comment' to move forward or backward over one comment or several comments. - Function: forward-comment COUNT &optional BUFFER This function moves point forward across COUNT comments (backward, if COUNT is negative). If it finds anything other than a comment or whitespace, it stops, leaving point at the place where it stopped. It also stops after satisfying COUNT. Optional argument BUFFER defaults to the current buffer. To move forward over all comments and whitespace following point, use `(forward-comment (buffer-size))'. `(buffer-size)' is a good argument to use, because the number of comments in the buffer cannot exceed that many.  File: lispref.info, Node: Standard Syntax Tables, Next: Syntax Table Internals, Prev: Parsing Expressions, Up: Syntax Tables Some Standard Syntax Tables =========================== Most of the major modes in XEmacs have their own syntax tables. Here are several of them: - Function: standard-syntax-table This function returns the standard syntax table, which is the syntax table used in Fundamental mode. - Variable: text-mode-syntax-table The value of this variable is the syntax table used in Text mode. - Variable: c-mode-syntax-table The value of this variable is the syntax table for C-mode buffers. - Variable: emacs-lisp-mode-syntax-table The value of this variable is the syntax table used in Emacs Lisp mode by editing commands. (It has no effect on the Lisp `read' function.)  File: lispref.info, Node: Syntax Table Internals, Prev: Standard Syntax Tables, Up: Syntax Tables Syntax Table Internals ====================== Each element of a syntax table is an integer that encodes the syntax of one character: the syntax class, possible matching character, and flags. Lisp programs don't usually work with the elements directly; the Lisp-level syntax table functions usually work with syntax descriptors (*note Syntax Descriptors::.). The low 8 bits of each element of a syntax table indicate the syntax class. Integer Class 0 whitespace 1 punctuation 2 word 3 symbol 4 open parenthesis 5 close parenthesis 6 expression prefix 7 string quote 8 paired delimiter 9 escape 10 character quote 11 comment-start 12 comment-end 13 inherit The next 8 bits are the matching opposite parenthesis (if the character has parenthesis syntax); otherwise, they are not meaningful. The next 6 bits are the flags.  File: lispref.info, Node: Abbrevs, Next: Extents, Prev: Syntax Tables, Up: Top Abbrevs And Abbrev Expansion **************************** An abbreviation or "abbrev" is a string of characters that may be expanded to a longer string. The user can insert the abbrev string and find it replaced automatically with the expansion of the abbrev. This saves typing. The set of abbrevs currently in effect is recorded in an "abbrev table". Each buffer has a local abbrev table, but normally all buffers in the same major mode share one abbrev table. There is also a global abbrev table. Normally both are used. An abbrev table is represented as an obarray containing a symbol for each abbreviation. The symbol's name is the abbreviation; its value is the expansion; its function definition is the hook function to do the expansion (*note Defining Abbrevs::.); its property list cell contains the use count, the number of times the abbreviation has been expanded. Because these symbols are not interned in the usual obarray, they will never appear as the result of reading a Lisp expression; in fact, normally they are never used except by the code that handles abbrevs. Therefore, it is safe to use them in an extremely nonstandard way. *Note Creating Symbols::. For the user-level commands for abbrevs, see *Note Abbrev Mode: (emacs)Abbrevs. * Menu: * Abbrev Mode:: Setting up XEmacs for abbreviation. * Tables: Abbrev Tables. Creating and working with abbrev tables. * Defining Abbrevs:: Specifying abbreviations and their expansions. * Files: Abbrev Files. Saving abbrevs in files. * Expansion: Abbrev Expansion. Controlling expansion; expansion subroutines. * Standard Abbrev Tables:: Abbrev tables used by various major modes.  File: lispref.info, Node: Abbrev Mode, Next: Abbrev Tables, Up: Abbrevs Setting Up Abbrev Mode ====================== Abbrev mode is a minor mode controlled by the value of the variable `abbrev-mode'. - Variable: abbrev-mode A non-`nil' value of this variable turns on the automatic expansion of abbrevs when their abbreviations are inserted into a buffer. If the value is `nil', abbrevs may be defined, but they are not expanded automatically. This variable automatically becomes local when set in any fashion. - Variable: default-abbrev-mode This is the value of `abbrev-mode' for buffers that do not override it. This is the same as `(default-value 'abbrev-mode)'.  File: lispref.info, Node: Abbrev Tables, Next: Defining Abbrevs, Prev: Abbrev Mode, Up: Abbrevs Abbrev Tables ============= This section describes how to create and manipulate abbrev tables. - Function: make-abbrev-table This function creates and returns a new, empty abbrev table--an obarray containing no symbols. It is a vector filled with zeros. - Function: clear-abbrev-table TABLE This function undefines all the abbrevs in abbrev table TABLE, leaving it empty. The function returns `nil'. - Function: define-abbrev-table TABNAME DEFINITIONS This function defines TABNAME (a symbol) as an abbrev table name, i.e., as a variable whose value is an abbrev table. It defines abbrevs in the table according to DEFINITIONS, a list of elements of the form `(ABBREVNAME EXPANSION HOOK USECOUNT)'. The value is always `nil'. - Variable: abbrev-table-name-list This is a list of symbols whose values are abbrev tables. `define-abbrev-table' adds the new abbrev table name to this list. - Function: insert-abbrev-table-description NAME &optional HUMAN This function inserts before point a description of the abbrev table named NAME. The argument NAME is a symbol whose value is an abbrev table. The value is always `nil'. If HUMAN is non-`nil', the description is human-oriented. Otherwise the description is a Lisp expression--a call to `define-abbrev-table' that would define NAME exactly as it is currently defined.  File: lispref.info, Node: Defining Abbrevs, Next: Abbrev Files, Prev: Abbrev Tables, Up: Abbrevs Defining Abbrevs ================ These functions define an abbrev in a specified abbrev table. `define-abbrev' is the low-level basic function, while `add-abbrev' is used by commands that ask for information from the user. - Function: add-abbrev TABLE TYPE ARG This function adds an abbreviation to abbrev table TABLE based on information from the user. The argument TYPE is a string describing in English the kind of abbrev this will be (typically, `"global"' or `"mode-specific"'); this is used in prompting the user. The argument ARG is the number of words in the expansion. The return value is the symbol that internally represents the new abbrev, or `nil' if the user declines to confirm redefining an existing abbrev. - Function: define-abbrev TABLE NAME EXPANSION HOOK This function defines an abbrev in TABLE named NAME, to expand to EXPANSION, and call HOOK. The return value is an uninterned symbol that represents the abbrev inside XEmacs; its name is NAME. The argument NAME should be a string. The argument EXPANSION should be a string, or `nil' to undefine the abbrev. The argument HOOK is a function or `nil'. If HOOK is non-`nil', then it is called with no arguments after the abbrev is replaced with EXPANSION; point is located at the end of EXPANSION when HOOK is called. The use count of the abbrev is initialized to zero. - User Option: only-global-abbrevs If this variable is non-`nil', it means that the user plans to use global abbrevs only. This tells the commands that define mode-specific abbrevs to define global ones instead. This variable does not alter the behavior of the functions in this section; it is examined by their callers.  File: lispref.info, Node: Abbrev Files, Next: Abbrev Expansion, Prev: Defining Abbrevs, Up: Abbrevs Saving Abbrevs in Files ======================= A file of saved abbrev definitions is actually a file of Lisp code. The abbrevs are saved in the form of a Lisp program to define the same abbrev tables with the same contents. Therefore, you can load the file with `load' (*note How Programs Do Loading::.). However, the function `quietly-read-abbrev-file' is provided as a more convenient interface. User-level facilities such as `save-some-buffers' can save abbrevs in a file automatically, under the control of variables described here. - User Option: abbrev-file-name This is the default file name for reading and saving abbrevs. - Function: quietly-read-abbrev-file FILENAME This function reads abbrev definitions from a file named FILENAME, previously written with `write-abbrev-file'. If FILENAME is `nil', the file specified in `abbrev-file-name' is used. `save-abbrevs' is set to `t' so that changes will be saved. This function does not display any messages. It returns `nil'. - User Option: save-abbrevs A non-`nil' value for `save-abbrev' means that XEmacs should save abbrevs when files are saved. `abbrev-file-name' specifies the file to save the abbrevs in. - Variable: abbrevs-changed This variable is set non-`nil' by defining or altering any abbrevs. This serves as a flag for various XEmacs commands to offer to save your abbrevs. - Command: write-abbrev-file FILENAME Save all abbrev definitions, in all abbrev tables, in the file FILENAME, in the form of a Lisp program that when loaded will define the same abbrevs. This function returns `nil'.  File: lispref.info, Node: Abbrev Expansion, Next: Standard Abbrev Tables, Prev: Abbrev Files, Up: Abbrevs Looking Up and Expanding Abbreviations ====================================== Abbrevs are usually expanded by commands for interactive use, including `self-insert-command'. This section describes the subroutines used in writing such functions, as well as the variables they use for communication. - Function: abbrev-symbol ABBREV &optional TABLE This function returns the symbol representing the abbrev named ABBREV. The value returned is `nil' if that abbrev is not defined. The optional second argument TABLE is the abbrev table to look it up in. If TABLE is `nil', this function tries first the current buffer's local abbrev table, and second the global abbrev table. - Function: abbrev-expansion ABBREV &optional TABLE This function returns the string that ABBREV would expand into (as defined by the abbrev tables used for the current buffer). The optional argument TABLE specifies the abbrev table to use, as in `abbrev-symbol'. - Command: expand-abbrev This command expands the abbrev before point, if any. If point does not follow an abbrev, this command does nothing. The command returns `t' if it did expansion, `nil' otherwise. - Command: abbrev-prefix-mark &optional ARG Mark current point as the beginning of an abbrev. The next call to `expand-abbrev' will use the text from here to point (where it is then) as the abbrev to expand, rather than using the previous word as usual. - User Option: abbrev-all-caps When this is set non-`nil', an abbrev entered entirely in upper case is expanded using all upper case. Otherwise, an abbrev entered entirely in upper case is expanded by capitalizing each word of the expansion. - Variable: abbrev-start-location This is the buffer position for `expand-abbrev' to use as the start of the next abbrev to be expanded. (`nil' means use the word before point instead.) `abbrev-start-location' is set to `nil' each time `expand-abbrev' is called. This variable is also set by `abbrev-prefix-mark'. - Variable: abbrev-start-location-buffer The value of this variable is the buffer for which `abbrev-start-location' has been set. Trying to expand an abbrev in any other buffer clears `abbrev-start-location'. This variable is set by `abbrev-prefix-mark'. - Variable: last-abbrev This is the `abbrev-symbol' of the last abbrev expanded. This information is left by `expand-abbrev' for the sake of the `unexpand-abbrev' command. - Variable: last-abbrev-location This is the location of the last abbrev expanded. This contains information left by `expand-abbrev' for the sake of the `unexpand-abbrev' command. - Variable: last-abbrev-text This is the exact expansion text of the last abbrev expanded, after case conversion (if any). Its value is `nil' if the abbrev has already been unexpanded. This contains information left by `expand-abbrev' for the sake of the `unexpand-abbrev' command. - Variable: pre-abbrev-expand-hook This is a normal hook whose functions are executed, in sequence, just before any expansion of an abbrev. *Note Hooks::. Since it is a normal hook, the hook functions receive no arguments. However, they can find the abbrev to be expanded by looking in the buffer before point. The following sample code shows a simple use of `pre-abbrev-expand-hook'. If the user terminates an abbrev with a punctuation character, the hook function asks for confirmation. Thus, this hook allows the user to decide whether to expand the abbrev, and aborts expansion if it is not confirmed. (add-hook 'pre-abbrev-expand-hook 'query-if-not-space) ;; This is the function invoked by `pre-abbrev-expand-hook'. ;; If the user terminated the abbrev with a space, the function does ;; nothing (that is, it returns so that the abbrev can expand). If the ;; user entered some other character, this function asks whether ;; expansion should continue. ;; If the user answers the prompt with `y', the function returns ;; `nil' (because of the `not' function), but that is ;; acceptable; the return value has no effect on expansion. (defun query-if-not-space () (if (/= ?\ (preceding-char)) (if (not (y-or-n-p "Do you want to expand this abbrev? ")) (error "Not expanding this abbrev"))))  File: lispref.info, Node: Standard Abbrev Tables, Prev: Abbrev Expansion, Up: Abbrevs Standard Abbrev Tables ====================== Here we list the variables that hold the abbrev tables for the preloaded major modes of XEmacs. - Variable: global-abbrev-table This is the abbrev table for mode-independent abbrevs. The abbrevs defined in it apply to all buffers. Each buffer may also have a local abbrev table, whose abbrev definitions take precedence over those in the global table. - Variable: local-abbrev-table The value of this buffer-local variable is the (mode-specific) abbreviation table of the current buffer. - Variable: fundamental-mode-abbrev-table This is the local abbrev table used in Fundamental mode; in other words, it is the local abbrev table in all buffers in Fundamental mode. - Variable: text-mode-abbrev-table This is the local abbrev table used in Text mode. - Variable: c-mode-abbrev-table This is the local abbrev table used in C mode. - Variable: lisp-mode-abbrev-table This is the local abbrev table used in Lisp mode and Emacs Lisp mode.