`C-c C-b' to move to previous equal level. `C-h m' will give more
info about the Outline mode.
-Also, Try finding the things you need using one of the search commands
+Also, try finding the things you need using one of the search commands
XEmacs provides (e.g. `C-s').
General advice:
+
WATCH OUT for your init file! (~/.xemacs/init.el or ~/.emacs) If
you observe strange problems, invoke XEmacs with the `-vanilla'
option and see if you can repeat the problem.
+ Note that most of the problems described here manifest at RUN
+ time, even those described as BUILD problems. It is quite unusual
+ for a released XEmacs to fail to build. So a "build problem"
+ requires you to tweak the build environment, then rebuild XEmacs.
+ A "runtime problem" is one that can be fixed by proper
+ configuration of the existing build. Compatibility problems and
+ Mule issues are generally runtime problems, but are treated
+ separately for convenience.
+
* Problems with building XEmacs
===============================
** General
+ Much general information is in INSTALL. If it's covered in
+ INSTALL, we don't repeat it here.
+
+*** How does I configure to get the buffer tabs/progress bars?
+
+These features depend on support for "native widgets". Use the
+--with-widgets option to configure. Configuration of widgets is
+automatic for "modern" toolkits (MS Windows, GTK, and Motif), but if
+you are using Xt and the Athena widgets, you will probably want to
+specify a "3d" widget set. See configure --usage, and don't forget to
+install the corresponding development libraries.
+
+*** I know I have libfoo installed, but configure doesn't find it.
+
+Typical of Linux systems with package managers. To link with a shared
+library, you only need the shared library. To compile objects that
+link with it, you need the headers---and distros don't provide them with
+the libraries. You need the additional "development" package, too.
+
*** Don't use -O2 with gcc 2.8.1 and egcs 1.0 under SPARC architectures
without also using `-fno-schedule-insns'.
** SunOS/Solaris
+*** Crashes when using Motif libraries, especially with multiple frames.
+
+Crashes that produce C-backtraces like this:
+
+#0 0xfec9a118 in _libc_kill () from /usr/lib/libc.so.1
+#1 0x77f48 in fatal_error_signal (sig=11)
+ at /codes/rpluim/xemacs-21.4/src/emacs.c:539
+#2 <signal handler called>
+#3 0xfee929f4 in XFindContext () from /usr/openwin/lib/libX11.so.4
+#4 0xfee92930 in XFindContext () from /usr/openwin/lib/libX11.so.4
+#5 0xff297e54 in DisplayDestroy () from /usr/dt/lib/libXm.so.4
+#6 0xfefbece0 in XtCallCallbackList () from /usr/openwin/lib/libXt.so.4
+#7 0xfefc486c in XtPhase2Destroy () from /usr/openwin/lib/libXt.so.4
+#8 0xfefc45d0 in _XtDoPhase2Destroy () from /usr/openwin/lib/libXt.so.4
+#9 0xfefc43b4 in XtDestroyWidget () from /usr/openwin/lib/libXt.so.4
+#10 0x15cf9c in x_delete_device (d=0x523f00)
+
+are caused by buggy Motif libraries. Installing the following patches
+has been reported to solve the problem on Solaris 2.7:
+
+107081-40 107656-07
+
+For information (although they have not been confirmed to work), the
+equivalent patches for Solaris 2.8 are:
+
+108940-33 108652-25
+
*** Dumping error when using GNU binutils / GNU ld on a Sun.
Errors similar to the following:
* Problems with running XEmacs
==============================
** General
+*** Whenever I try to retrieve a remote file, I have problems.
+
+A typical error: FTP Error: USER request failed; 500 AUTH not understood.
+Thanks to giacomo boffi <giacomo.boffi@polimi.it> on comp.emacs.xemacs:
+
+ tell your ftp client to not attempt AUTH authentication (or do not
+ use FTP servers that don't understand AUTH)
+
+and notes that you need to add an element (often "-u") to
+`efs-ftp-program-args'. Use M-x customize-variable, and verify the
+needed flag with `man ftp' or other local documentation.
+
*** gnuserv is running, some clients can connect, but others cannot.
The code in gnuslib.c respects the value of TMPDIR. If the server and
** Linux
+*** XEmacs crashes on startup, in make-frame.
+
+Typically the Lisp backtrace includes
+
+ make-frame(nil #<x-device on ":0.0" 0x2558>)
+
+somewhere near the top. One problem is due to an improvement in GNU
+ld that sorts the ELF reloc sections in the executable, giving
+dramatic speedups in startup for large executables. It also confuses
+the traditional unexec code in XEmacs, leading to the core dump. The
+solution is to use either the `--ldflags="-z nocombreloc" or the
+"--pdump" option to configure. "--pdump" is recommended.
+
+Recent 21.4 and 21.5 versions of XEmacs autodetect this feature of ld
+in configure. Unfortunately, Red Hat and SuSE (at least) distributed
+prerelease versions of ld (numbered around 2.11.90.x.y, nicknamed
+"Hannibal Lecter" at XEmacs.ORG) where autodetection fails but the
+feature is enabled by default. The recommended procedure is to
+upgrade to binutils >= 2.12 and rerun configure. Otherwise you must
+apply the flags by hand.
+
+Andrew Jaffe reported a problem on Red Hat 7.3 with identical
+symptoms, except that ld was already being invoked with -z
+nocombreloc. Switching dialogs and widgets from Motif to Athena
+eliminated the problem. Both LessTif and OpenMotif were installed,
+and a bad interaction is suspected. This problem has not yet been
+fully analyzed.
+
*** Debian
**** XEmacs warns "Symbol `toggleClassRec' has different size in shared
object, consider re-linking / Symbol `labelClassRec' has different
This is written for the mainline GNU Emacs but the author has made
efforts to adapt it to XEmacs. YMMV.
-*** You get crashes in a non-C locale with Linux GNU Libc 2.0.
-
-Internationalization was not the top priority for GNU Libc 2.0.
-As of this writing (1998-12-28) you may get crashes while running
-XEmacs in a non-C locale. For example, `LC_ALL=en_US xemacs' crashes
-while `LC_ALL=C xemacs' runs fine. This happens for example with GNU
-libc 2.0.7. Installing libintl.a and libintl.h built from gettext
-0.10.35 and re-building XEmacs solves the crashes. Presumably soon
-everyone will upgrade to GNU Libc 2.1 and this problem will go away.
-
-*** `C-z', or `M-x suspend-emacs' hangs instead of suspending.
-
-If you build with `gpm' support on Linux, you cannot suspend XEmacs
-because gpm installs a buggy SIGTSTP handler. Either compile with
-`--with-gpm=no', or don't suspend XEmacs on the Linux console until
-this bug is fixed.
-
-*** With certain fonts, when the cursor appears on a character, the
-character doesn't appear--you get a solid box instead.
-
-One user on a Linux system reported that this problem went away with
-installation of a new X server. The failing server was XFree86 3.1.1.
-XFree86 3.1.2 works.
-
*** Slow startup on Linux.
People using systems based on the Linux kernel sometimes report that
The solution is either to build XEmacs with -sound=native,noesd or to make sure
that esd is in fact running.
+*** You get crashes in a non-C locale with Linux GNU Libc 2.0.
+
+Internationalization was not the top priority for GNU Libc 2.0.
+As of this writing (1998-12-28) you may get crashes while running
+XEmacs in a non-C locale. For example, `LC_ALL=en_US xemacs' crashes
+while `LC_ALL=C xemacs' runs fine. This happens for example with GNU
+libc 2.0.7. Installing libintl.a and libintl.h built from gettext
+0.10.35 and re-building XEmacs solves the crashes. Presumably soon
+everyone will upgrade to GNU Libc 2.1 and this problem will go away.
+
+*** `C-z', or `M-x suspend-emacs' hangs instead of suspending.
+
+If you build with `gpm' support on Linux, you cannot suspend XEmacs
+because gpm installs a buggy SIGTSTP handler. Either compile with
+`--with-gpm=no', or don't suspend XEmacs on the Linux console until
+this bug is fixed.
+
+*** With certain fonts, when the cursor appears on a character, the
+character doesn't appear--you get a solid box instead.
+
+One user on a Linux system reported that this problem went away with
+installation of a new X server. The failing server was XFree86 3.1.1.
+XFree86 3.1.2 works.
+
** IRIX
*** On Irix, I don't see the toolbar icons and I'm getting lots of
entries in the warnings buffer.
projects / chise / xemacs-chise.git.1 / blobdiff