--- /dev/null
+;;; paths.el --- define pathnames for use by various Emacs commands.
+
+;; Copyright (C) 1986, 1988, 1993, 1994, 1997 Free Software Foundation, Inc.
+
+;; Maintainer: FSF
+;; Keywords: internal, dumped
+
+;; This file is part of XEmacs.
+
+;; XEmacs is free software; you can redistribute it and/or modify it
+;; under the terms of the GNU General Public License as published by
+;; the Free Software Foundation; either version 2, or (at your option)
+;; any later version.
+
+;; XEmacs is distributed in the hope that it will be useful, but
+;; WITHOUT ANY WARRANTY; without even the implied warranty of
+;; MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU
+;; General Public License for more details.
+
+;; You should have received a copy of the GNU General Public License
+;; along with XEmacs; see the file COPYING. If not, write to the Free
+;; Software Foundation, 675 Mass Ave, Cambridge, MA 02139, USA.
+
+;;; Synched up with: FSF 19.30.
+
+;;; Commentary:
+
+;; This file is dumped with XEmacs.
+
+;; These are default settings for names of certain files and directories
+;; that Emacs needs to refer to from time to time.
+
+;; If these settings are not right, override them with `setq'
+;; in site-start.el. Do not change this file.
+
+;;; Code:
+
+;Note: FSF's version is:
+;(defvar Info-default-directory-list
+; (let ((start (list "/usr/local/lib/info/"
+; ;; This comes second so that, if it is the same
+; ;; as configure-info-directory (which is usually true)
+; ;; and Emacs has been installed (also usually true)
+; ;; then the list will end with two copies of this;
+; ;; which means that the last dir file Info-insert-dir
+; ;; finds will be the one in this directory.
+; "/usr/local/info/"))
+; (configdir (file-name-as-directory configure-info-directory)))
+; (setq start (nconc start (list configdir)))
+; start)
+; "List of directories to search for Info documentation files.
+;They are searched in the order they are given in this list.
+;Therefore, the directory of Info files that come with Emacs
+;normally should come last (so that local files override standard ones).")
+
+;Our commented-out version is:
+;(defvar Info-default-directory-list
+; (let ((start (list "/usr/local/info/"
+; "/usr/local/lib/info/"))
+; (configdir (file-name-as-directory configure-info-directory)))
+; (or (member configdir start)
+; (setq start (nconc start (list configdir))))
+; (or (member (expand-file-name "../info/" data-directory) start)
+; (setq start
+; (nconc start
+; (list (expand-file-name "../info/" data-directory)))))
+; start)
+; "List of directories to search for Info documentation files.")
+
+(defvar news-path "/usr/spool/news/"
+ "The root directory below which all news files are stored.")
+
+(defvar news-inews-program nil
+ "Program to post news.")
+
+;(defvar gnus-default-nntp-server ""
+; ;; set this to your local server
+; "The name of the host running an NNTP server.
+;If it is a string such as \":DIRECTORY\", then ~/DIRECTORY
+;is used as a news spool. `gnus-nntp-server' is initialized from NNTPSERVER
+;environment variable or, if none, this value.")
+
+;(defvar gnus-nntp-service "nntp"
+; "NNTP service name, usually \"nntp\" or 119).
+;Go to a local news spool if its value is nil, in which case `gnus-nntp-server'
+;should be set to `(system-name)'.")
+
+(defvar gnus-local-domain nil
+ "*Your domain name without a host name: for example, \"ai.mit.edu\".
+The DOMAINNAME environment variable is used instead if defined.
+If the function `system-name' returns a fully qualified domain name,
+there is no need to set this variable.")
+
+(defvar gnus-local-organization nil
+ "*The name of your organization, as a string.
+The `ORGANIZATION' environment variable is used instead if defined.")
+
+(defvar mh-progs nil
+ "Directory containing MH commands.")
+
+(defvar mh-lib nil
+ "Directory of MH library.")
+
+(defvar rmail-file-name (purecopy "~/RMAIL")
+ "Name of user's primary mail file.")
+
+(defvar gnus-startup-file (purecopy "~/.newsrc")
+ "The file listing groups to which user is subscribed.
+Will use `gnus-startup-file'-SERVER instead if exists.")
+
+(defconst rmail-spool-directory nil
+ "Name of directory used by system mailer for delivering new mail.
+Its name should end with a slash.")
+
+(defconst sendmail-program nil
+ "Program used to send messages.")
+
+(defconst remote-shell-program nil
+ "Program used to execute shell commands on a remote machine.")
+
+(defconst term-file-prefix
+ (purecopy (if (eq system-type 'vax-vms) "[.term]" "term/"))
+ "If non-nil, Emacs startup does (load (concat term-file-prefix (getenv \"TERM\")))
+You may set this variable to nil in your `.emacs' file if you do not wish
+the terminal-initialization file to be loaded.")
+
+(defconst manual-program nil
+ "Program to run to print man pages.")
+
+(defconst abbrev-file-name
+ (purecopy (if (eq system-type 'vax-vms)
+ "~/abbrev.def"
+ "~/.abbrev_defs"))
+ "*Default name of file to read abbrevs from.")
+
+(defconst directory-abbrev-alist
+ (list
+ ;;
+ ;; This matches the default Sun automounter temporary mount points. These
+ ;; temporary mount points may go away, so it's important that we only try
+ ;; to read files under the "advertised" mount point, rather than the
+ ;; temporary one, or it will look like files have been deleted on us.
+ ;; Whoever came up with this design is clearly a moron of the first order,
+ ;; but now we're stuck with it, no doubt until the end of time.
+ ;;
+ ;; For best results, automounter junk should go near the front of this
+ ;; list, and other user translations should come after it.
+ ;;
+ ;; You may need to change this if you're not running the Sun automounter,
+ ;; if you're not running in the default configuration. Because the
+ ;; designers (and I use that term loosely) of the automounters failed to
+ ;; provide any uniform way of disambiguating a pathname, emacs needs to
+ ;; have knowledge about exactly how the automounter mangles pathnames
+ ;; (and this knowledge is basically impossible to derive at run-time.)
+ ;;
+ (cons (purecopy "\\`/tmp_mnt/") (purecopy "/"))
+ ))
+
+;; Formerly, the values of these variables were computed once
+;; (at dump time). However, with the advent of pre-compiled binaries
+;; and homebrewed systems such as Linux where who knows where the
+;; hell the various programs may be located (if they even exist at all),
+;; it's clear that we need to recompute these values at run time.
+;; In typical short-sightedness, site administrators have been told up
+;; till now to do `setq's in site-init.el, which is run only once --
+;; at dump time. So we have to do contortions to make sure we don't
+;; override values set in site-init.el.
+
+(defun initialize-xemacs-paths ()
+ "Initialize the XEmacs path variables from the environment.
+Called automatically at dump time and run time. Do not call this.
+Will not override settings in site-init.el or site-run.el."
+ (let ((l #'(lambda (var value)
+ (let ((origsym (intern (concat "paths-el-original-"
+ (symbol-name var)))))
+ (if (running-temacs-p)
+ (progn
+ (set var value)
+ (set origsym value))
+ (and (eq (symbol-value var) (symbol-value origsym))
+ (set var value)))))))
+ (funcall
+ l 'news-inews-program
+ (cond ((file-exists-p "/usr/bin/inews") "/usr/bin/inews")
+ ((file-exists-p "/usr/local/inews") "/usr/local/inews")
+ ((file-exists-p "/usr/local/bin/inews") "/usr/local/bin/inews")
+ ((file-exists-p "/usr/lib/news/inews") "/usr/lib/news/inews")
+ (t "inews")))
+
+ (funcall
+ l 'mh-progs
+ (cond ((file-directory-p "/usr/bin/mh") "/usr/bin/mh/") ;Ultrix 4.2
+ ((file-directory-p "/usr/new/mh") "/usr/new/mh/") ;Ultrix <4.2
+ ((file-directory-p "/usr/local/bin/mh") "/usr/local/bin/mh/")
+ ((file-directory-p "/usr/local/mh") "/usr/local/mh/")
+ (t "/usr/local/bin/")))
+
+ (funcall
+ l 'mh-libs
+ (cond ((file-directory-p "/usr/lib/mh") "/usr/lib/mh/") ;Ultrix 4.2
+ ((file-directory-p "/usr/new/lib/mh")
+ "/usr/new/lib/mh/") ;Ultrix <4.2
+ ((file-directory-p "/usr/local/lib/mh") "/usr/local/lib/mh/")
+ (t "/usr/local/bin/mh/")))
+
+ (funcall
+ l 'rmail-spool-directory
+ (cond ((string-match "^[^-]+-[^-]+-sco3.2v4" system-configuration)
+ "/usr/spool/mail/")
+ ;; On The Bull DPX/2 /usr/spool/mail is used although
+ ;; it is usg-unix-v.
+ ((string-match "^m68k-bull-sysv3" system-configuration)
+ "/usr/spool/mail/")
+ ;; SVR4 and recent BSD are said to use this.
+ ;; Rather than trying to know precisely which systems use it,
+ ;; let's assume this dir is never used for anything else.
+ ((file-exists-p "/var/mail")
+ "/var/mail/")
+ ((memq system-type '(dgux hpux usg-unix-v unisoft-unix rtu irix))
+ "/usr/mail/")
+ ((memq system-type '(linux))
+ "/var/spool/mail/")
+ (t "/usr/spool/mail/")))
+
+ (funcall
+ l 'sendmail-program
+ (cond
+ ((file-exists-p "/usr/lib/sendmail") "/usr/lib/sendmail")
+ ((file-exists-p "/usr/sbin/sendmail") "/usr/sbin/sendmail")
+ ((file-exists-p "/usr/ucblib/sendmail") "/usr/ucblib/sendmail")
+ (t "fakemail"))) ;In ../etc, to interface to /bin/mail.
+
+ (funcall
+ l 'remote-shell-program
+ (cond
+ ;; Some systems use rsh for the remote shell; others use that
+ ;; name for the restricted shell and use remsh for the remote
+ ;; shell. Let's try to guess based on what we actually find
+ ;; out there. The restricted shell is almost certainly in
+ ;; /bin or /usr/bin, so it's probably safe to assume that an
+ ;; rsh found elsewhere is the remote shell program. The
+ ;; converse is not true: /usr/bin/rsh could be either one, so
+ ;; check that last.
+ ((file-exists-p "/usr/ucb/remsh") "/usr/ucb/remsh")
+ ((file-exists-p "/usr/bsd/remsh") "/usr/bsd/remsh")
+ ((file-exists-p "/bin/remsh") "/bin/remsh")
+ ((file-exists-p "/usr/bin/remsh") "/usr/bin/remsh")
+ ((file-exists-p "/usr/local/bin/remsh") "/usr/local/bin/remsh")
+ ((file-exists-p "/usr/ucb/rsh") "/usr/ucb/rsh")
+ ((file-exists-p "/usr/bsd/rsh") "/usr/bsd/rsh")
+ ((file-exists-p "/usr/local/bin/rsh") "/usr/local/bin/rsh")
+ ((file-exists-p "/usr/bin/rcmd") "/usr/bin/rcmd")
+ ((file-exists-p "/bin/rcmd") "/bin/rcmd")
+ ((file-exists-p "/bin/rsh") "/bin/rsh")
+ ((file-exists-p "/usr/bin/rsh") "/usr/bin/rsh")
+ (t "rsh")))
+
+ (funcall
+ l 'manual-program
+ ;; Solaris 2 has both of these files; prefer /usr/ucb/man
+ ;; because the other has nonstandard argument conventions.
+ (if (file-exists-p "/usr/ucb/man")
+ "/usr/ucb/man" "/usr/bin/man")))
+)
+
+(if (running-temacs-p)
+ (initialize-xemacs-paths))
+
+;;; paths.el ends here
projects / chise / xemacs-chise.git.1 / blobdiff