# Makefile for Microsoft NMAKE
# Copyright (C) 1995 Board of Trustees, University of Illinois.
-# Copyright (C) 1995, 1996 Ben Wing.
+# Copyright (C) 1995, 1996, 2000 Ben Wing.
# Copyright (C) 1995 Sun Microsystems, Inc.
# Copyright (C) 1998 Free Software Foundation, Inc.
#
default: all
-XEMACS=..
+# APA: Since there seems to be no way to determine the directory where
+# xemacs.mak is located (from within nmake) we just insist on the user
+# to invoke nmake in the directory where xemacs.mak is.
+!if !exist("$(MAKEDIR)\xemacs.mak")
+!error Please run nmake from the directory of this makefile (xemacs\nt).
+!endif
+
+XEMACS=$(MAKEDIR)\..
LISP=$(XEMACS)\lisp
LIB_SRC=$(XEMACS)\lib-src
MODULES=$(XEMACS)\modules
-DINFODOCK_MINOR_VERSION=$(infodock_minor_version) \
-DINFODOCK_BUILD_VERSION=$(infodock_build_version)
!else
+XEMACS_VERSION_STRING=$(emacs_major_version).$(emacs_minor_version)
!if "$(emacs_beta_version)" != ""
-XEMACS_VERSION_STRING=$(emacs_major_version).$(emacs_minor_version)-b$(emacs_beta_version)
+!if "$(emacs_is_beta)" != ""
+XEMACS_VERSION_STRING=$(XEMACS_VERSION_STRING)-b$(emacs_beta_version)
!else
-XEMACS_VERSION_STRING=$(emacs_major_version).$(emacs_minor_version)
+XEMACS_VERSION_STRING=$(XEMACS_VERSION_STRING).$(emacs_beta_version)
+!endif
!endif
PROGRAM_DEFINES= \
-DPATH_VERSION=\"$(XEMACS_VERSION_STRING)\" \
!if !defined(HAVE_GIF)
HAVE_GIF=1
!endif
+!if !defined(HAVE_GTK)
+HAVE_GTK=0
+!endif
!if !defined(HAVE_TOOLBARS)
HAVE_TOOLBARS=$(HAVE_XPM)
!endif
!message Specified X11 directory does not contain "$(X11_DIR)\LIB\X11.LIB"
CONFIG_ERROR=1
!endif
+!if $(HAVE_MS_WINDOWS) && $(HAVE_GTK) && !defined(GTK_DIR)
+!message Please specify root directory for your GTK installation: GTK_DIR=path
+CONFIG_ERROR=1
+!endif
!if $(HAVE_MS_WINDOWS) && $(HAVE_XPM) && !defined(XPM_DIR)
!message Please specify root directory for your XPM installation: XPM_DIR=path
CONFIG_ERROR=1
! if [if not exist $(OUTDIR)\nul mkdir "$(OUTDIR)"]
! endif
# generate an nmake-readable version of depend
-! if [perl -p -e "s/^\x23ifdef (.+)/!if defined($$1)/; s/^\x23e/!e/;" \
+# #### here, it doesn't seem to matter if we double ^'s!
+# results are the same with all single ^ and all double ^^!
+# see comment below.
+# #### Yuuuuuuuuuuck!!! Cygwin is too smart for its own good. If we are
+# being run from within Cygwin, a Cygwin Perl seems to require twice as
+# much backslash quoting. This does not happen, of course, with a non-
+# Cygwin Perl, so in that circumstance, you'd be screwed and would have
+# to fix this Makefile to not have a special Cygwin case.
+! if defined(_)
+! if [perl -p -e "s/^\\x23if defined(.+)/!if defined$$1/; s/^\\x23e/!e/;" \
+ -e "s/([\\s=^])([\\w\\d\\.\\-^]+\\.[ch^])/$$1$(SRC:\=\\\\)\\\\$$2/g;" \
+ -e "s/^(.+)\\.o:(.+)/$(OUTDIR:\=\\\\)\\\\$$1.obj:$$2/;" \
+ < $(SRC)\depend > $(OUTDIR)\depend.tmp]
+! endif
+! else
+! if [perl -p -e "s/^\x23if defined(.+)/!if defined$$1/; s/^\x23e/!e/;" \
-e "s/([\s=^])([\w\d\.\-^]+\.[ch^])/$$1$(SRC:\=\\)\\$$2/g;" \
- -e "s/^(.+)\.o:(.+)/$(OUTDIR:\=\\)\\$$1.obj:$$2 $(NT:\=\\)\\config.inc/;" \
+ -e "s/^(.+)\.o:(.+)/$(OUTDIR:\=\\)\\$$1.obj:$$2/;" \
< $(SRC)\depend > $(OUTDIR)\depend.tmp]
+! endif
! endif
! include "$(OUTDIR)\depend.tmp"
!else
DEFINES=$(X_DEFINES) $(MSW_DEFINES) $(MULE_DEFINES) \
$(TAGBITS_DEFINES) $(LRECORD_DEFINES) $(UNION_DEFINES) \
$(DUMPER_DEFINES) $(MALLOC_DEFINES) $(QUICK_DEFINES) \
- -DWIN32 -D_WIN32 -DWIN32_LEAN_AND_MEAN -DWINDOWSNT -Demacs \
+ -DWIN32_LEAN_AND_MEAN -DWIN32_NATIVE -Demacs \
-DHAVE_CONFIG_H $(PROGRAM_DEFINES) $(PATH_DEFINES)
#------------------------------------------------------------------------------
# lib-src programs
-LIB_SRC_DEFINES = -DHAVE_CONFIG_H -DWIN32 -DWINDOWSNT
+LIB_SRC_DEFINES = -DHAVE_CONFIG_H -DWIN32_NATIVE
#
# Creating config.values to be used by config.el
cd $(LIB_SRC)
$(CCV) -I. -I$(XEMACS)/src -I$(XEMACS)/nt/inc $(LIB_SRC_DEFINES) $(CFLAGS) -Fe$@ $** wsock32.lib -link -incremental:no
cd $(NT)
-$(LIB_SRC)/minitar.exe : $(NT)/minitar.mak $(NT)/minitar.c
- nmake -nologo -f minitar.mak ZLIB="$(ZLIB_DIR)" NT="$(NT)" LIB_SRC="$(LIB_SRC)"
+
+$(LIB_SRC)/minitar.exe : $(NT)/minitar.c
+ $(CCV) $(CFLAGS) -I$(ZLIB_DIR) -Fe$@ $** $(ZLIB_DIR)\zlib.lib -link -incremental:no
LIB_SRC_TOOLS = \
$(LIB_SRC)/etags.exe \
#------------------------------------------------------------------------------
-# runxemacs proglet
-
-RUNEMACS = $(SRC)\runxemacs.exe
-
-$(RUNEMACS): $(LIB_SRC)\run.c $(LIB_SRC)\run.res
- $(CCV) -I$(LIB_SRC) $(CFLAGS) -Fe$@ -Fo$(LIB_SRC) -Fd$(LIB_SRC)\ $** kernel32.lib user32.lib -link -incremental:no
-
-$(LIB_SRC)\run.res: $(LIB_SRC)\run.rc
- rc -I$(LIB_SRC) -Fo$@ $**
-
-#------------------------------------------------------------------------------
-
# dump-id.c file that contains the dump id
$(SRC)\dump-id.c : $(LIB_SRC)/make-dump-id.exe
DOC_SRC1=\
$(SRC)\abbrev.c \
$(SRC)\alloc.c \
- $(SRC)\alloca.c \
$(SRC)\blocktype.c \
$(SRC)\buffer.c \
$(SRC)\bytecode.c \
$(SRC)\font-lock.c \
$(SRC)\frame.c \
$(SRC)\general.c \
+ $(SRC)\getloadavg.c \
$(SRC)\glyphs.c \
$(SRC)\glyphs-eimage.c \
$(SRC)\glyphs-widget.c \
$(SRC)\tparam.c \
$(SRC)\undo.c \
$(SRC)\window.c \
+ $(SRC)\win32.c \
$(SRC)\widget.c
!if $(HAVE_X_WINDOWS)
# This may not exist
!if "$(emacs_beta_version)" != ""
+!if "$(emacs_is_beta)" != ""
EMACS_BETA_VERSION=-DEMACS_BETA_VERSION=$(emacs_beta_version)
-!ENDIF
+!else
+EMACS_PATCH_LEVEL=-DEMACS_PATCH_LEVEL=$(emacs_beta_version)
+!endif
+!endif
!if !$(USE_PORTABLE_DUMPER)
TEMACS_ENTRYPOINT=-entry:_start
TEMACS_BROWSE=$(TEMACS_DIR)\temacs.bsc
TEMACS_SRC=$(SRC)
TEMACS_LIBS=$(LASTFILE) $(LWLIB) $(X_LIBS) $(MSW_LIBS) \
- oldnames.lib kernel32.lib user32.lib gdi32.lib advapi32.lib \
+ oldnames.lib kernel32.lib user32.lib gdi32.lib comdlg32.lib advapi32.lib \
shell32.lib wsock32.lib winmm.lib winspool.lib ole32.lib uuid.lib $(LIBC_LIB)
TEMACS_LFLAGS=-nologo $(LIBRARIES) $(DEBUG_FLAGS) -base:0x1000000\
-stack:0x800000 $(TEMACS_ENTRYPOINT) -subsystem:windows\
-pdb:$(TEMACS_DIR)\temacs.pdb -map:$(TEMACS_DIR)\temacs.map \
- -heap:0x00100000 -nodefaultlib -incremental:no
+ -heap:0x00100000 -nodefaultlib -incremental:no setargv.obj
TEMACS_CPP_FLAGS=-c \
$(CFLAGS) $(INCLUDES) $(DEFINES) $(DEBUG_DEFINES) \
-DEMACS_MAJOR_VERSION=$(emacs_major_version) \
-DEMACS_MINOR_VERSION=$(emacs_minor_version) \
$(EMACS_BETA_VERSION) \
+ $(EMACS_PATCH_LEVEL) \
-DXEMACS_CODENAME=\"$(xemacs_codename:&=and)\" \
-DEMACS_CONFIGURATION=\"$(EMACS_CONFIGURATION)\" \
-DPATH_PACKAGEPATH=\"$(PATH_PACKAGEPATH)\"
$(TEMACS_DUMP_OBJS)\
$(OUTDIR)\abbrev.obj \
$(OUTDIR)\alloc.obj \
- $(OUTDIR)\alloca.obj \
$(OUTDIR)\blocktype.obj \
$(OUTDIR)\buffer.obj \
$(OUTDIR)\bytecode.obj \
$(OUTDIR)\font-lock.obj \
$(OUTDIR)\frame.obj \
$(OUTDIR)\general.obj \
+ $(OUTDIR)\getloadavg.obj \
$(OUTDIR)\glyphs.obj \
$(OUTDIR)\glyphs-eimage.obj \
$(OUTDIR)\glyphs-widget.obj \
$(OUTDIR)\tparam.obj \
$(OUTDIR)\undo.obj \
$(OUTDIR)\widget.obj \
- $(OUTDIR)\window.obj
+ $(OUTDIR)\window.obj \
+ $(OUTDIR)\win32.obj
# Rules
!if $(DEBUG_XEMACS)
@dir /b/s $(OUTDIR)\*.sbr > bscmake.tmp
bscmake -nologo -o$(TEMACS_BROWSE) @bscmake.tmp
- @$(DEL) bscmake.tmp
+ $(DEL) bscmake.tmp
!endif
!if $(USE_PORTABLE_DUMPER)
@if exist $(SRC)\dump-id.c del $(SRC)\dump-id.c
cd $(XEMACS)
$(DEL) TAGS
set PATH=lib-src;%PATH%
-# argh!!! we need two ^^'s to get one ^, but only before a backslash.
-# i have no idea why. probably some obscure nmake quoting convention.
+# we need to double ^, but only before backslash! Doubling it elsewhere
+# causes problems. I don't understand this -- CMD.EXE uses ^ as a quoting
+# convention of sorts, but appears to leave it alone inside of double quotes,
+# even before \. Could this be nmake interference?
etags -a -r "/[ ]*DEF\(VAR\|INE\)_[A-Z_]+[ ]*([ ]*\"\([^^\"]+\)\"/\2/" src\*.c src\*.h lwlib\*.c lwlib\*.h lib-src\*.c lib-src\*.h
etags -a -l none -r "/^(def\(var\|un\|alias\|const\|macro\|subst\|struct\|face\|group\|custom\|ine-\(function\|compiler-macro\|[a-z-]+alias\)\)[ ]+'?\([^ ]+\)/\3/" $(tagslisp)\*.el
if exist "$(MAKEINFO)" goto test_done
@$(XEMACS_BATCH) -eval "(condition-case nil (require (quote texinfo)) (t (kill-emacs 1)))"
@if not errorlevel 1 goto suggest_makeinfo
-@echo XEmacs `info' cannot be built!
-@echo Install XEmacs package `texinfo' (see README.packages).
+@echo XEmacs 'info' cannot be built!
+@echo Install XEmacs package 'texinfo' (see README.packages).
:suggest_makeinfo
@echo Consider specifying path to makeinfo program: MAKEINFO=path
-@echo as this will build info docs faster than XEmacs using `texinfo'.
+@echo as this will build info docs faster than XEmacs using 'texinfo'.
@if errorlevel 1 exit 1
:test_done
<<NOKEEP
cd $(TEMACS_DIR)
set EMACSBOOTSTRAPLOADPATH=$(LISP);$(PACKAGE_PATH)
set EMACSBOOTSTRAPMODULEPATH=$(MODULES)
- -1 $(TEMACS_BATCH) -l $(TEMACS_DIR)\..\lisp\loadup.el dump
+ $(TEMACS_BATCH) -l $(TEMACS_DIR)\..\lisp\loadup.el dump
!if $(USE_PORTABLE_DUMPER)
rc -d INCLUDE_DUMP -Fo $(OUTDIR)\xemacs.res $(NT)\xemacs.rc
link.exe @<<
# Make the resource section read/write since almost all of it is the dump
# data which needs to be writable. This avoids having to copy it.
editbin -nologo -section:.rsrc,rw xemacs.exe
- del $(TEMACS_DIR)\xemacs.dmp
+ $(DEL) $(TEMACS_DIR)\xemacs.dmp
!endif
cd $(NT)
@if not exist $(TEMACS_DIR)\SATISFIED nmake -nologo -f xemacs.mak $@
# use this rule to build the complete system
all: installation $(OUTDIR)\nul $(LASTFILE) $(LWLIB) \
- $(LIB_SRC_TOOLS) $(RUNEMACS) $(TEMACS) update-elc $(DOC) $(PROGNAME) \
- update-auto-and-custom info
+ $(LIB_SRC_TOOLS) $(TEMACS) update-elc $(DOC) $(PROGNAME) \
+ update-elc-2 update-auto-and-custom info
temacs: $(LASTFILE) $(TEMACS)
@echo PlaceHolder > PlaceHolder
@xcopy /q PROBLEMS "$(INSTALL_DIR)\"
@xcopy /q PlaceHolder "$(INSTALL_DIR)\lock\"
- @$(DEL) "$(INSTALL_DIR)\lock\PlaceHolder"
+ $(DEL) "$(INSTALL_DIR)\lock\PlaceHolder"
@xcopy /q $(LIB_SRC)\*.exe "$(INSTALL_DIR)\$(EMACS_CONFIGURATION)\"
@copy $(LIB_SRC)\DOC "$(INSTALL_DIR)\$(EMACS_CONFIGURATION)"
@copy $(CONFIG_VALUES) "$(INSTALL_DIR)\$(EMACS_CONFIGURATION)"
@copy $(SRC)\xemacs.exe "$(INSTALL_DIR)\$(EMACS_CONFIGURATION)"
- @copy $(RUNEMACS) "$(INSTALL_DIR)\$(EMACS_CONFIGURATION)"
@xcopy /e /q $(XEMACS)\etc "$(INSTALL_DIR)\etc\"
@xcopy /e /q $(XEMACS)\info "$(INSTALL_DIR)\info\"
@xcopy /e /q $(XEMACS)\lisp "$(INSTALL_DIR)\lisp\"
@echo Making skeleton package tree in $(PACKAGE_PREFIX) ...
@xcopy /q PlaceHolder "$(PACKAGE_PREFIX)\site-packages\"
- @$(DEL) "$(PACKAGE_PREFIX)\site-packages\PlaceHolder"
+ $(DEL) "$(PACKAGE_PREFIX)\site-packages\PlaceHolder"
@xcopy /q PlaceHolder "$(PACKAGE_PREFIX)\mule-packages\"
- @$(DEL) "$(PACKAGE_PREFIX)\mule-packages\PlaceHolder"
+ $(DEL) "$(PACKAGE_PREFIX)\mule-packages\PlaceHolder"
@xcopy /q PlaceHolder "$(PACKAGE_PREFIX)\xemacs-packages\"
- @$(DEL) "$(PACKAGE_PREFIX)\xemacs-packages\PlaceHolder"
- @$(DEL) PlaceHolder
-
-distclean:
- $(DEL) *.bak
- $(DEL) *.orig
- $(DEL) *.rej
- $(DEL) *.tmp
+ $(DEL) "$(PACKAGE_PREFIX)\xemacs-packages\PlaceHolder"
+ $(DEL) PlaceHolder
+
+mostlyclean:
$(DEL) $(XEMACS)\Installation
- cd $(OUTDIR)
- $(DEL) *.lib
- $(DEL) *.obj
- $(DEL) *.pdb
- $(DEL) *.res
- $(DEL) *.sbr
- cd $(XEMACS)\$(TEMACS_DIR)
- $(DEL) config.h
- $(DEL) paths.h
- $(DEL) Emacs.ad.h
- $(DEL) *.bak
- $(DEL) *.orig
- $(DEL) *.rej
- $(DEL) *.exe
- $(DEL) *.map
- $(DEL) *.bsc
- $(DEL) *.pdb
- cd $(LIB_SRC)
- $(DEL) DOC
- $(DEL) *.bak
- $(DEL) *.orig
- $(DEL) *.rej
- $(DEL) *.exe
- $(DEL) *.obj
- $(DEL) *.pdb
- $(DEL) *.res
- $(DEL) $(CONFIG_VALUES)
- cd $(LISP)
- $(DEL) /s /q *.bak *.elc *.orig *.rej
- cd $(INFODIR)
- $(DEL) *.info*
+ $(DEL) $(OUTDIR)\*.lib $(OUTDIR)\*.obj $(OUTDIR)\*.pdb
+ $(DEL) $(OUTDIR)\*.res $(OUTDIR)\*.sbr
+ $(DEL) $(SRC)\*.exe $(SRC)\*.map $(SRC)\*.bsc $(SRC)\*.pdb
+ $(DEL) $(LIB_SRC)\*.exe $(LIB_SRC)\*.obj $(LIB_SRC)\*.pdb
+ $(DEL) $(LIB_SRC)\*.res
+
+clean: mostlyclean versionclean
+ $(DEL) $(XEMACS)\TAGS
+
+nicenclean: clean
+ $(DEL) $(NT)\*.bak $(NT)\*.orig $(NT)\*.rej $(NT)\*.tmp
+ $(DEL) $(LIB_SRC)\*.bak $(LIB_SRC)\*.orig $(LIB_SRC)\*.rej
+ $(DEL) $(LIB_SRC)\*.tmp
+ $(DEL) $(SRC)\*.bak $(SRC)\*.orig $(SRC)\*.rej $(SRC)\*.tmp
+ $(DEL) /s $(LISP)\*.bak $(LISP)\*.orig $(LISP)\*.rej $(LISP)\*.tmp
+
+## This is used in making a distribution.
+## Do not use it on development directories!
+distclean: nicenclean
+ $(DEL) $(SRC)\config.h $(SRC)\paths.h $(SRC)\Emacs.ad.h
+ $(DEL) $(LIB_SRC)\$(CONFIG_VALUES)
+ $(DEL) $(INFODIR)\*.info*
+ $(DEL) /s /q $(LISP)\*.elc
+
+realclean: distclean
+
+versionclean:
+ $(DEL) $(SRC)\xemacs.exe $(LIB_SRC)\DOC
+
+#not sure about those wildcards. DOS wildcards are stupid compared to Unix,
+#and could end up deleting *everything* instead of just backup files or
+#whatever.
+#extraclean: realclean
+# $(DEL) *~ *.*~ #* m\*~ m\#* s\*~ s\#*
depend:
cd $(SRC)
!if $(HAVE_MULE)
Compiling in MULE.
!endif
+!if $(HAVE_GTK)
+ --------------------------------------------------------------------
+ WARNING: You specified HAVE_GTK=1, but we are compiling WITHOUT GTK support.
+ WARNING: gtk-xemacs is not currently supported on MSWindows (mingw or msvc).
+ WARNING: Yes, we know that gtk has been ported to native MSWindows, but
+ WARNING: XEmacs is not yet ready to use that port.
+ --------------------------------------------------------------------
+!endif
!if $(HAVE_XPM)
Compiling in support for XPM images.
!else
@type $(XEMACS)\Installation
@echo --------------------------------------------------------------------
-# Update auto-autoloads.el and custom-load.el similar to what
-# XEmacs.rules does for xemacs-packages.
+# Update out-of-date .elcs, other than needed for dumping.
+update-elc-2:
+ $(XEMACS_BATCH) -l update-elc-2.el -f batch-update-elc-2 $(LISP)
+
+# Update auto-autoloads.el and custom-load.el, similar to what
+# XEmacs.rules does for xemacs-packages. This used to delete
+# auto-autoloads.el first, but that's a bad idea, because it forces
+# rebuilding from scratch, which is time-consuming; and the autoload
+# code is specifically written to do in-place updating. However, if
+# your auto-autoload file is messed up and you want it rebuilt from
+# scratch, delete it from the command line and then nmake with this
+# target.
update-auto-and-custom:
-# Don't delete this, because it forces rebuilding from scratch,
-# which is time-consuming; and the autoload code is specifically
-# written to do in-place updating.
-# @$(DEL) $(LISP)\auto-autoloads.el
# Combine into one invocation to avoid repeated startup penalty.
- $(XEMACS_BATCH) -l autoload -f batch-update-one-directory $(LISP) -f batch-byte-compile-one-file $(LISP)\auto-autoloads.el -l cus-dep -f Custom-make-dependencies $(LISP)
- @$(DEL) $(LISP)\auto-autoloads.el~
+ $(XEMACS_BATCH) -l autoload -f batch-update-one-directory $(LISP) -f batch-byte-compile-one-file $(LISP)\auto-autoloads.el -l cus-dep -f Custom-make-one-dependency $(LISP) -f batch-byte-compile-one-file $(LISP)\custom-load.el
+ $(DEL) $(LISP)\auto-autoloads.el~
+ $(DEL) $(LISP)\custom-load.el~
# DO NOT DELETE THIS LINE -- make depend depends on it.
projects / chise / xemacs-chise.git.1 / blobdiff