#include <config.h>
#include "lisp.h"
-#include <limits.h>
#include "buffer.h"
#include "device.h"
#define MAX_BUFPOS_GAP_SIZE_3 (65535/3)
#define MAX_BYTIND_GAP_SIZE_3 (3 * MAX_BUFPOS_GAP_SIZE_3)
+#ifndef UTF2000
short three_to_one_table[1 + MAX_BYTIND_GAP_SIZE_3];
+#endif
/* Various macros modelled along the lines of those in buffer.h.
Purposefully omitted from buffer.h because files other than this
the equivalent length in characters. */
Charcount
-bytecount_to_charcount (CONST Bufbyte *ptr, Bytecount len)
+bytecount_to_charcount (const Bufbyte *ptr, Bytecount len)
{
Charcount count = 0;
- CONST Bufbyte *end = ptr + len;
-
-#if (LONGBITS == 32 || LONGBITS == 64)
-
-# if (LONGBITS == 32)
-# define LONG_BYTES 4
-# define ALIGN_MASK 0xFFFFFFFCU
-# define HIGH_BIT_MASK 0x80808080U
-# else
-# define LONG_BYTES 8
-# define ALIGN_MASK 0xFFFFFFFFFFFFFFF8UL
- /* I had a dream, I was being overrun with early Intel processors ... */
-# define HIGH_BIT_MASK 0x8080808080808080UL
-# endif
-
- /* When we have a large number of bytes to scan, we can be trickier
- and significantly faster by scanning them in chunks of the CPU word
- size (assuming that they're all ASCII -- we cut out as soon as
- we find something non-ASCII). */
- if (len >= 12)
- {
- /* Determine the section in the middle of the string that's
- amenable to this treatment. Everything has to be aligned
- on CPU word boundaries. */
- CONST Bufbyte *aligned_ptr =
- (CONST Bufbyte *) (((unsigned long) (ptr + LONG_BYTES - 1)) &
- ALIGN_MASK);
- CONST Bufbyte *aligned_end =
- (CONST Bufbyte *) (((unsigned long) end) & ALIGN_MASK);
-
- /* Handle unaligned stuff at the beginning. */
- while (ptr < aligned_ptr)
+ const Bufbyte *end = ptr + len;
+
+#if SIZEOF_LONG == 8
+# define STRIDE_TYPE long
+# define HIGH_BIT_MASK 0x8080808080808080UL
+#elif SIZEOF_LONG_LONG == 8 && !(defined (i386) || defined (__i386__))
+# define STRIDE_TYPE long long
+# define HIGH_BIT_MASK 0x8080808080808080ULL
+#elif SIZEOF_LONG == 4
+# define STRIDE_TYPE long
+# define HIGH_BIT_MASK 0x80808080UL
+#else
+# error Add support for 128-bit systems here
+#endif
+
+#define ALIGN_BITS ((EMACS_UINT) (ALIGNOF (STRIDE_TYPE) - 1))
+#define ALIGN_MASK (~ ALIGN_BITS)
+#define ALIGNED(ptr) ((((EMACS_UINT) ptr) & ALIGN_BITS) == 0)
+#define STRIDE sizeof (STRIDE_TYPE)
+
+ while (ptr < end)
+ {
+ if (BYTE_ASCII_P (*ptr))
{
- if (!BYTE_ASCII_P (*ptr))
- goto bail;
- count++, ptr++;
+ /* optimize for long stretches of ASCII */
+ if (! ALIGNED (ptr))
+ ptr++, count++;
+ else
+ {
+ const unsigned STRIDE_TYPE *ascii_end =
+ (const unsigned STRIDE_TYPE *) ptr;
+ /* This loop screams, because we can typically
+ detect ASCII characters 8 at a time. */
+ while ((const Bufbyte *) ascii_end + STRIDE <= end
+ && !(*ascii_end & HIGH_BIT_MASK))
+ ascii_end++;
+ if ((Bufbyte *) ascii_end == ptr)
+ ptr++, count++;
+ else
+ {
+ count += (Bufbyte *) ascii_end - ptr;
+ ptr = (Bufbyte *) ascii_end;
+ }
+ }
}
- /* Now do it. */
- while (ptr < aligned_end)
+ else
{
-
- if ((* (unsigned long *) ptr) & HIGH_BIT_MASK)
- goto bail;
- ptr += LONG_BYTES;
- count += LONG_BYTES;
+ /* optimize for successive characters from the same charset */
+ Bufbyte leading_byte = *ptr;
+ size_t bytes = REP_BYTES_BY_FIRST_BYTE (leading_byte);
+ while ((ptr < end) && (*ptr == leading_byte))
+ ptr += bytes, count++;
}
}
-#endif /* LONGBITS == 32 || LONGBITS == 64 */
-
- bail:
- while (ptr < end)
- {
- count++;
- INC_CHARPTR (ptr);
- }
#ifdef ERROR_CHECK_BUFPOS
/* Bomb out if the specified substring ends in the middle
of a character. Note that we might have already gotten
the equivalent length in bytes. */
Bytecount
-charcount_to_bytecount (CONST Bufbyte *ptr, Charcount len)
+charcount_to_bytecount (const Bufbyte *ptr, Charcount len)
{
- CONST Bufbyte *newptr = ptr;
+ const Bufbyte *newptr = ptr;
while (len > 0)
{
bufmax = buf->text->mule_bufmax;
bytmin = buf->text->mule_bytmin;
bytmax = buf->text->mule_bytmax;
+#ifdef UTF2000
+ size = buf->text->mule_size;
+#else
size = (1 << buf->text->mule_shifter) + !!buf->text->mule_three_p;
+#endif
/* The basic idea here is that we shift the "known region" up or down
until it overlaps the specified position. We do this by moving
}
#ifdef ERROR_CHECK_BUFPOS
else if (x >= bufmin)
- abort ();
+ ABORT ();
#endif
else
{
discovered isn't too large, because we use a fixed-length
table to divide by 3. */
+#ifdef UTF2000
+ buf->text->mule_size = size;
+#endif
if (size == 3)
{
int gap = bytmax - bytmin;
+#ifndef UTF2000
buf->text->mule_three_p = 1;
buf->text->mule_shifter = 1;
+#endif
if (gap > MAX_BYTIND_GAP_SIZE_3)
{
}
else
{
+#ifndef UTF2000
buf->text->mule_three_p = 0;
if (size == 4)
buf->text->mule_shifter = 2;
else
buf->text->mule_shifter = size - 1;
+#endif
}
buf->text->mule_bufmin = bufmin;
bufmax = buf->text->mule_bufmax;
bytmin = buf->text->mule_bytmin;
bytmax = buf->text->mule_bytmax;
+#ifdef UTF2000
+ size = buf->text->mule_size;
+#else
size = (1 << buf->text->mule_shifter) + !!buf->text->mule_three_p;
+#endif
/* The basic idea here is that we shift the "known region" up or down
until it overlaps the specified position. We do this by moving
}
#ifdef ERROR_CHECK_BUFPOS
else if (x >= bytmin)
- abort ();
+ ABORT ();
#endif
else
{
discovered isn't too large, because we use a fixed-length
table to divide by 3. */
+#ifdef UTF2000
+ buf->text->mule_size = size;
+ #endif
if (size == 3)
{
int gap = bytmax - bytmin;
+#ifndef UTF2000
buf->text->mule_three_p = 1;
buf->text->mule_shifter = 1;
+#endif
if (gap > MAX_BYTIND_GAP_SIZE_3)
{
}
else
{
+#ifndef UTF2000
buf->text->mule_three_p = 0;
if (size == 4)
buf->text->mule_shifter = 2;
else
buf->text->mule_shifter = size - 1;
+#endif
}
buf->text->mule_bufmin = bufmin;
Bytecount bytelength,
Charcount charlength)
{
+#ifdef UTF2000
+ int size = buf->text->mule_size;
+#else
int size = (1 << buf->text->mule_shifter) + !!buf->text->mule_three_p;
+#endif
int i;
/* Adjust the cache of known positions. */
Bufpos
get_buffer_pos_char (struct buffer *b, Lisp_Object pos, unsigned int flags)
{
+ /* Does not GC */
Bufpos ind;
Bufpos min_allowed, max_allowed;
get_buffer_range_char (struct buffer *b, Lisp_Object from, Lisp_Object to,
Bufpos *from_out, Bufpos *to_out, unsigned int flags)
{
+ /* Does not GC */
Bufpos min_allowed, max_allowed;
min_allowed = (flags & GB_ALLOW_PAST_ACCESSIBLE) ?
adjust_markers (struct buffer *buf, Memind from, Memind to,
Bytecount amount)
{
- struct Lisp_Marker *m;
+ Lisp_Marker *m;
for (m = BUF_MARKERS (buf); m; m = marker_next (m))
m->memind = do_marker_adjustment (m->memind, from, to, amount);
static void
adjust_markers_for_insert (struct buffer *buf, Memind ind, Bytecount amount)
{
- struct Lisp_Marker *m;
+ Lisp_Marker *m;
for (m = BUF_MARKERS (buf); m; m = marker_next (m))
{
/* Routines for dealing with the gap */
/************************************************************************/
-/* XEmacs requires an ANSI C compiler, and it damn well better have a
- working memmove() */
-#define GAP_USE_BCOPY
-#ifdef BCOPY_UPWARD_SAFE
-# undef BCOPY_UPWARD_SAFE
-#endif
-#ifdef BCOPY_DOWNWARD_SAFE
-# undef BCOPY_DOWNWARD_SAFE
-#endif
-#define BCOPY_UPWARD_SAFE 1
-#define BCOPY_DOWNWARD_SAFE 1
-
/* maximum amount of memory moved in a single chunk. Increasing this
value improves gap-motion efficiency but decreases QUIT responsiveness
time. Was 32000 but today's processors are faster and files are
/* Move at most GAP_MOVE_CHUNK chars before checking again for a quit. */
if (i > GAP_MOVE_CHUNK)
i = GAP_MOVE_CHUNK;
-#ifdef GAP_USE_BCOPY
- if (i >= 128
- /* bcopy is safe if the two areas of memory do not overlap
- or on systems where bcopy is always safe for moving upward. */
- && (BCOPY_UPWARD_SAFE
- || to - from >= 128))
+
+ if (i >= 128)
{
- /* If overlap is not safe, avoid it by not moving too many
- characters at once. */
- if (!BCOPY_UPWARD_SAFE && i > to - from)
- i = to - from;
new_s1 -= i;
- from -= i, to -= i;
+ from -= i;
+ to -= i;
memmove (to, from, i);
}
else
-#endif
{
new_s1 -= i;
while (--i >= 0)
/* Move at most GAP_MOVE_CHUNK chars before checking again for a quit. */
if (i > GAP_MOVE_CHUNK)
i = GAP_MOVE_CHUNK;
-#ifdef GAP_USE_BCOPY
- if (i >= 128
- /* bcopy is safe if the two areas of memory do not overlap
- or on systems where bcopy is always safe for moving downward. */
- && (BCOPY_DOWNWARD_SAFE
- || from - to >= 128))
+
+ if (i >= 128)
{
- /* If overlap is not safe, avoid it by not moving too many
- characters at once. */
- if (!BCOPY_DOWNWARD_SAFE && i > from - to)
- i = from - to;
new_s1 += i;
memmove (to, from, i);
- from += i, to += i;
+ from += i;
+ to += i;
}
else
-#endif
{
new_s1 += i;
while (--i >= 0)
move_gap (struct buffer *buf, Bytind pos)
{
if (! BUF_BEG_ADDR (buf))
- abort ();
+ ABORT ();
if (pos < BI_BUF_GPT (buf))
gap_left (buf, pos);
else if (pos > BI_BUF_GPT (buf))
of the specified region, that will also be handled correctly.
begin_multiple_change() returns a number (actually a specpdl depth)
- that you must pass to end_multiple_change() when you are done. */
+ that you must pass to end_multiple_change() when you are done.
+
+ FSF Emacs 20 implements a similar feature, accessible from Lisp
+ through a `combine-after-change-calls' special form, which is
+ essentially equivalent to this function. We should consider
+ whether we want to introduce a similar Lisp form. */
int
begin_multiple_change (struct buffer *buf, Bufpos start, Bufpos end)
/* We should first reset the variable and then change the buffer,
because Fset_buffer() can throw. */
inside_change_hook = 0;
- Fset_buffer (buffer);
+ if (XBUFFER (buffer) != current_buffer)
+ Fset_buffer (buffer);
return Qnil;
}
if (!inside_change_hook)
{
Lisp_Object buffer;
+ int speccount;
/* Are we in a multiple-change session? */
if (buf->text->changes->in_multiple_change &&
}
/* Now in any case run the before-change-functions if any. */
+ speccount = specpdl_depth ();
+ record_unwind_protect (change_function_restore, Fcurrent_buffer ());
+ inside_change_hook = 1;
MAP_INDIRECT_BUFFERS (buf, mbuf, bufcons)
{
/* Obsolete, for compatibility */
|| !NILP (symbol_value_in_buffer (Qbefore_change_function, buffer)))
{
- int speccount = specpdl_depth ();
- record_unwind_protect (change_function_restore, Fcurrent_buffer ());
set_buffer_internal (buf);
- inside_change_hook = 1;
va_run_hook_with_args (Qbefore_change_functions, 2,
make_int (start), make_int (end));
/* Obsolete, for compatibility */
va_run_hook_with_args (Qbefore_change_function, 2,
make_int (start), make_int (end));
- unbind_to (speccount, Qnil);
}
}
+ /* Make sure endpoints remain valid. before-change-functions
+ might have modified the buffer. */
+ if (start < BUF_BEGV (buf)) start = BUF_BEGV (buf);
+ if (start > BUF_ZV (buf)) start = BUF_ZV (buf);
+ if (end < BUF_BEGV (buf)) end = BUF_BEGV (buf);
+ if (end > BUF_ZV (buf)) end = BUF_ZV (buf);
+
MAP_INDIRECT_BUFFERS (buf, mbuf, bufcons)
{
XSETBUFFER (buffer, mbuf);
- report_extent_modification (buffer, start, end,
- &inside_change_hook, 0);
+ report_extent_modification (buffer, start, end, 0);
}
+ unbind_to (speccount, Qnil);
/* Only now do we indicate that the before-change-functions have
been called, in case some function throws out. */
if (!inside_change_hook)
{
Lisp_Object buffer;
+ int speccount;
if (buf->text->changes->in_multiple_change &&
buf->text->changes->mc_begin != 0)
return; /* after-change-functions signalled when all changes done */
}
+ speccount = specpdl_depth ();
+ record_unwind_protect (change_function_restore, Fcurrent_buffer ());
+ inside_change_hook = 1;
MAP_INDIRECT_BUFFERS (buf, mbuf, bufcons)
{
XSETBUFFER (buffer, mbuf);
/* Obsolete, for compatibility */
|| !NILP (symbol_value_in_buffer (Qafter_change_function, buffer)))
{
- int speccount = specpdl_depth ();
- record_unwind_protect (change_function_restore, Fcurrent_buffer ());
set_buffer_internal (buf);
- inside_change_hook = 1;
/* The actual after-change functions take slightly
different arguments than what we were passed. */
va_run_hook_with_args (Qafter_change_functions, 3,
va_run_hook_with_args (Qafter_change_function, 3,
make_int (start), make_int (new_end),
make_int (orig_end - start));
- unbind_to (speccount, Qnil);
}
}
+ /* Make sure endpoints remain valid. after-change-functions
+ might have modified the buffer. */
+ if (start < BUF_BEGV (buf)) start = BUF_BEGV (buf);
+ if (start > BUF_ZV (buf)) start = BUF_ZV (buf);
+ if (new_end < BUF_BEGV (buf)) new_end = BUF_BEGV (buf);
+ if (new_end > BUF_ZV (buf)) new_end = BUF_ZV (buf);
+ if (orig_end < BUF_BEGV (buf)) orig_end = BUF_BEGV (buf);
+ if (orig_end > BUF_ZV (buf)) orig_end = BUF_ZV (buf);
+
MAP_INDIRECT_BUFFERS (buf, mbuf, bufcons)
{
XSETBUFFER (buffer, mbuf);
- report_extent_modification (buffer, start, new_end,
- &inside_change_hook, 1);
+ report_extent_modification (buffer, start, new_end, 1);
}
+ unbind_to (speccount, Qnil); /* sets inside_change_hook back to 0 */
}
}
if (!NILP (buf->filename) && lockit &&
BUF_SAVE_MODIFF (buf) >= BUF_MODIFF (buf))
{
-#ifdef CLASH_DETECTION
- if (!NILP (buf->file_truename))
- /* Make binding buffer-file-name to nil effective. */
- lock_file (buf->file_truename);
-#else
/* At least warn if this file has changed on disk since it was visited.*/
if (NILP (Fverify_visited_file_modtime (buffer))
&& !NILP (Ffile_exists_p (buf->filename)))
call1_in_buffer (buf, intern ("ask-user-about-supersession-threat"),
buf->filename);
+#ifdef CLASH_DETECTION
+ if (!NILP (buf->file_truename))
+ /* Make binding buffer-file-name to nil effective. */
+ lock_file (buf->file_truename);
#endif /* not CLASH_DETECTION */
}
UNGCPRO;
/************************************************************************/
void
-fixup_internal_substring (CONST Bufbyte *nonreloc, Lisp_Object reloc,
+fixup_internal_substring (const Bufbyte *nonreloc, Lisp_Object reloc,
Bytecount offset, Bytecount *len)
{
assert ((nonreloc && NILP (reloc)) || (!nonreloc && STRINGP (reloc)));
if (*len < 0)
{
if (nonreloc)
- *len = strlen ((CONST char *) nonreloc) - offset;
+ *len = strlen ((const char *) nonreloc) - offset;
else
*len = XSTRING_LENGTH (reloc) - offset;
}
Charcount
buffer_insert_string_1 (struct buffer *buf, Bufpos pos,
- CONST Bufbyte *nonreloc, Lisp_Object reloc,
+ const Bufbyte *nonreloc, Lisp_Object reloc,
Bytecount offset, Bytecount length,
int flags)
{
Charcount
buffer_insert_raw_string_1 (struct buffer *buf, Bufpos pos,
- CONST Bufbyte *nonreloc, Bytecount length,
+ const Bufbyte *nonreloc, Bytecount length,
int flags)
{
/* This function can GC */
/* Insert the null-terminated string S (in external format). */
Charcount
-buffer_insert_c_string_1 (struct buffer *buf, Bufpos pos, CONST char *s,
+buffer_insert_c_string_1 (struct buffer *buf, Bufpos pos, const char *s,
int flags)
{
/* This function can GC */
- CONST char *translated = GETTEXT (s);
- return buffer_insert_string_1 (buf, pos, (CONST Bufbyte *) translated, Qnil,
+ const char *translated = GETTEXT (s);
+ return buffer_insert_string_1 (buf, pos, (const Bufbyte *) translated, Qnil,
0, strlen (translated), flags);
}
}
void
-find_charsets_in_bufbyte_string (unsigned char *charsets, CONST Bufbyte *str,
+find_charsets_in_bufbyte_string (Charset_ID *charsets, const Bufbyte *str,
Bytecount len)
{
#ifndef MULE
/* Telescope this. */
charsets[0] = 1;
#else
- CONST Bufbyte *strend = str + len;
- memset (charsets, 0, NUM_LEADING_BYTES);
+ const Bufbyte *strend = str + len;
+ memset (charsets, 0, NUM_LEADING_BYTES * sizeof(Charset_ID));
+
+ /* #### SJT doesn't like this. */
+ if (len == 0)
+ {
+ charsets[XCHARSET_LEADING_BYTE (Vcharset_ascii) - MIN_LEADING_BYTE] = 1;
+ return;
+ }
while (str < strend)
{
- charsets[CHAR_LEADING_BYTE (charptr_emchar (str)) - 128] = 1;
+#ifdef UTF2000
+ charsets[CHAR_CHARSET_ID (charptr_emchar (str))
+ - MIN_LEADING_BYTE] = 1;
+#else /* I'm not sure the definition for UTF2000 works with leading-byte
+ representation. */
+ charsets[CHAR_LEADING_BYTE (charptr_emchar (str))
+ - MIN_LEADING_BYTE] = 1;
+#endif
INC_CHARPTR (str);
}
#endif
}
void
-find_charsets_in_emchar_string (unsigned char *charsets, CONST Emchar *str,
- Charcount len)
+find_charsets_in_charc_string (Charset_ID *charsets, const Charc *str,
+ Charcount len)
{
#ifndef MULE
/* Telescope this. */
#else
int i;
- memset (charsets, 0, NUM_LEADING_BYTES);
+ memset (charsets, 0, NUM_LEADING_BYTES * sizeof(Charset_ID));
+
+ /* #### SJT doesn't like this. */
+ if (len == 0)
+ {
+ charsets[XCHARSET_ID (Vcharset_ascii) - MIN_LEADING_BYTE] = 1;
+ return;
+ }
+
for (i = 0; i < len; i++)
{
- charsets[CHAR_LEADING_BYTE (str[i]) - 128] = 1;
+ charsets[CHARC_CHARSET_ID (str[i]) - MIN_LEADING_BYTE] = 1;
}
#endif
}
int
-bufbyte_string_displayed_columns (CONST Bufbyte *str, Bytecount len)
+bufbyte_string_displayed_columns (const Bufbyte *str, Bytecount len)
{
int cols = 0;
- CONST Bufbyte *end = str + len;
+ const Bufbyte *end = str + len;
while (str < end)
{
#ifdef MULE
Emchar ch = charptr_emchar (str);
- cols += XCHARSET_COLUMNS (CHAR_CHARSET (ch));
+ cols += CHAR_COLUMNS (ch);
#else
cols++;
#endif
}
int
-emchar_string_displayed_columns (CONST Emchar *str, Charcount len)
+charc_string_displayed_columns (const Charc *str, Charcount len)
{
#ifdef MULE
int cols = 0;
int i;
for (i = 0; i < len; i++)
- cols += XCHARSET_COLUMNS (CHAR_CHARSET (str[i]));
+ cols += CHARC_COLUMNS (str[i]);
return cols;
#else /* not MULE */
/* NOTE: Does not reset the Dynarr. */
void
-convert_bufbyte_string_into_emchar_dynarr (CONST Bufbyte *str, Bytecount len,
- Emchar_dynarr *dyn)
+convert_bufbyte_string_into_charc_dynarr (const Bufbyte *str, Bytecount len,
+ Charc_dynarr *dyn)
{
- CONST Bufbyte *strend = str + len;
+ const Bufbyte *strend = str + len;
while (str < strend)
{
- Emchar ch = charptr_emchar (str);
- Dynarr_add (dyn, ch);
+ Dynarr_add (dyn, CHAR_TO_CHARC (charptr_emchar (str)));
INC_CHARPTR (str);
}
}
Charcount
-convert_bufbyte_string_into_emchar_string (CONST Bufbyte *str, Bytecount len,
+convert_bufbyte_string_into_emchar_string (const Bufbyte *str, Bytecount len,
Emchar *arr)
{
- CONST Bufbyte *strend = str + len;
+ const Bufbyte *strend = str + len;
Charcount newlen = 0;
while (str < strend)
{
Does not add a terminating zero. */
void
-convert_emchar_string_into_bufbyte_dynarr (Emchar *arr, int nels,
- Bufbyte_dynarr *dyn)
+convert_charc_string_into_bufbyte_dynarr (Charc *arr, int nels,
+ Bufbyte_dynarr *dyn)
{
Bufbyte str[MAX_EMCHAR_LEN];
int i;
for (i = 0; i < nels; i++)
{
- Bytecount len = set_charptr_emchar (str, arr[i]);
+ Bytecount len = set_charptr_emchar (str, CHARC_TO_CHAR (arr[i]));
Dynarr_add_many (dyn, str, len);
}
}
is one more than this: the returned string is zero-terminated. */
Bufbyte *
-convert_emchar_string_into_malloced_string (Emchar *arr, int nels,
+convert_charc_string_into_malloced_string (Charc *arr, int nels,
Bytecount *len_out)
{
/* Damn zero-termination. */
int i;
for (i = 0; i < nels; i++)
- str += set_charptr_emchar (str, arr[i]);
+ {
+ str += set_charptr_emchar (str, CHARC_TO_CHAR (arr[i]));
+ }
*str = '\0';
len = str - strorig;
str = (Bufbyte *) xmalloc (1 + len);
void
reinit_vars_of_insdel (void)
{
+#ifndef UTF2000
int i;
+#endif
inside_change_hook = 0;
in_first_change = 0;
+#ifndef UTF2000
for (i = 0; i <= MAX_BYTIND_GAP_SIZE_3; i++)
three_to_one_table[i] = i / 3;
+#endif
}
void
b->text->mule_bufmin = b->text->mule_bufmax = 1;
b->text->mule_bytmin = b->text->mule_bytmax = 1;
+#ifdef UTF2000
+ b->text->mule_size = 0;
+#else
b->text->mule_shifter = 0;
b->text->mule_three_p = 0;
+#endif
for (i = 0; i < 16; i++)
{
projects / chise / xemacs-chise.git.1 / blobdiff