--- /dev/null
+## DIST: This is the distribution Makefile for XEmacs. configure can
+## DIST: make most of the changes to this file you might want, so try
+## DIST: that first.
+
+## This file is part of XEmacs.
+
+## XEmacs is free software; you can redistribute it and/or modify it
+## under the terms of the GNU General Public License as published by the
+## Free Software Foundation; either version 2, or (at your option) any
+## later version.
+
+## XEmacs is distributed in the hope that it will be useful, but WITHOUT
+## ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
+## FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License
+## for more details.
+
+## You should have received a copy of the GNU General Public License
+## along with XEmacs; see the file COPYING. If not, write to
+## the Free Software Foundation, Inc., 59 Temple Place - Suite 330,
+## Boston, MA 02111-1307, USA.
+
+## make all to compile and build XEmacs.
+## make install to build and install it.
+## make install-only to install after a previous complete build
+## make TAGS to update tags tables.
+
+## make clean or make mostlyclean
+## Delete all files from the current directory that are normally
+## created by building the program. Don't delete the files that
+## record the configuration. Also preserve files that could be made
+## by building, but normally aren't because the distribution comes
+## with them.
+
+## Delete `.dvi' files here if they are not part of the distribution.
+
+## make distclean
+## Delete all files from the current directory that are created by
+## configuring or building the program. If you have unpacked the
+## source and built the program without creating any other files,
+## `make distclean' should leave only the files that were in the
+## distribution.
+
+## make realclean
+## Delete everything from the current directory that can be
+## reconstructed with this Makefile. This typically includes
+## everything deleted by distclean, plus more: C source files
+## produced by Bison, tags tables, info files, and so on.
+
+## make extraclean
+## Still more severe - delete backup and autosave files, too.
+
+#ifdef USE_GNU_MAKE
+RECURSIVE_MAKE=$(MAKE)
+#else
+@SET_MAKE@
+RECURSIVE_MAKE=@RECURSIVE_MAKE@
+#endif
+
+SHELL = /bin/sh
+LANG = C
+RM = rm -f
+pwd = /bin/pwd
+
+## ==================== Things `configure' Might Edit ====================
+
+CC=@CC@
+CPP=@CPP@
+LN_S=@LN_S@
+CFLAGS=@CFLAGS@
+CPPFLAGS=@CPPFLAGS@
+
+## These help us choose version- and architecture-specific directories
+## to install files in.
+
+## This should be the number of the XEmacs version we're building,
+## like `19.12' or `19.13'.
+version=@version@
+
+## This should be the name of the configuration we're building XEmacs
+## for, like `mips-dec-ultrix' or `sparc-sun-sunos'.
+configuration=@configuration@
+
+## This will be the name of the generated binary and is set automatically
+## by configure.
+PROGNAME=@PROGNAME@
+
+## ==================== Where To Install Things ====================
+
+## The default location for installation. Everything is placed in
+## subdirectories of this directory. The default values for many of
+## the variables below are expressed in terms of this one, so you may
+## not need to change them. This defaults to /usr/local.
+prefix=@prefix@
+
+## Like `prefix', but used for architecture-specific files.
+exec_prefix=@exec_prefix@
+
+## Where to install XEmacs and other binaries that people will want to
+## run directly (like etags).
+bindir=@bindir@
+
+## Where to install architecture-independent data files.
+## ${lispdir} and ${etcdir} are subdirectories of this.
+datadir=@datadir@
+
+## Where to find XEmacs packages.
+pkgdir=@pkgdir@
+
+## Where to install and expect the files that XEmacs modifies as it runs.
+## These files are all architecture-independent. Right now, the
+## only such data is the locking directory;
+## ${lockdir} is a subdirectory of this.
+statedir=@statedir@
+
+## Where to install and expect executable files to be run by XEmacs
+## rather than directly by users, and other architecture-dependent data
+## ${archlibdir} is a subdirectory of this.
+libdir=@libdir@
+
+## Where to install XEmacs's man pages, and what extension they should have.
+mandir=@mandir@
+manext=.1
+
+## Where to install and expect the info files describing XEmacs. In the
+## past, this defaulted to a subdirectory of ${prefix}/lib/xemacs, but
+## since there are now many packages documented with the texinfo
+## system, it is inappropriate to imply that it is part of XEmacs.
+infodir=@infodir@
+
+## Document me.
+## See callproc.c for code which references this.
+infopath=@infopath@
+
+## Where to find the source code. The source code for XEmacs's C kernel is
+## expected to be in ${srcdir}/src, and the source code for XEmacs's
+## utility programs is expected to be in ${srcdir}/lib-src. This is
+## set by the configure script's `--srcdir' option.
+srcdir=@srcdir@
+
+## Where the build is done.
+blddir=@blddir@
+
+## ==================== XEmacs-specific directories ====================
+
+## These variables hold the values XEmacs will actually use. They are
+## based on the values of the standard Make variables above.
+
+## Where to install the lisp files distributed with
+## XEmacs. This includes the XEmacs version, so that the
+## lisp files for different versions of XEmacs will install
+## themselves in separate directories.
+lispdir=@lispdir@
+
+## Directory XEmacs should search for lisp files specific
+## to this site (i.e. customizations), before consulting
+## ${lispdir}.
+sitelispdir=@sitelispdir@
+
+## Where XEmacs will search for its lisp files while
+## building. This is only used during the process of
+## compiling XEmacs, to help XEmacs find its lisp files
+## before they've been installed in their final location.
+## It's usually identical to lispdir, except that the
+## entry for the directory containing the installed lisp
+## files has been replaced with ../lisp. This should be a
+## colon-separated list of directories.
+buildlispdir=${srcdir}/lisp
+
+## Where to install the other architecture-independent
+## data files distributed with XEmacs (like the tutorial,
+## the cookie recipes and the Zippy database). This path
+## usually contains the XEmacs version number, so the data
+## files for multiple versions of XEmacs may be installed
+## at once.
+etcdir=@etcdir@
+
+## Where to create and expect the locking directory, where
+## the XEmacs locking code keeps track of which files are
+## currently being edited.
+lockdir=@lockdir@
+
+## Where to put executables to be run by XEmacs rather than
+## the user. This path usually includes the XEmacs version
+## and configuration name, so that multiple configurations
+## for multiple versions of XEmacs may be installed at
+## once.
+archlibdir=@archlibdir@
+
+## ==================== Utility Programs for the Build ====================
+
+## Allow the user to specify the install program.
+INSTALL = @install_pp@ @INSTALL@
+INSTALL_PROGRAM = @INSTALL_PROGRAM@
+INSTALL_DATA = @INSTALL_DATA@
+
+## ============================= Targets ==============================
+
+## Subdirectories to make recursively. `lisp' is not included
+## because the compiled lisp files are part of the distribution
+## and you cannot remake them without installing XEmacs first.
+MAKE_SUBDIR = @MAKE_SUBDIR@
+
+## Subdirectories that can be made recursively.
+SUBDIR = ${MAKE_SUBDIR} man
+
+## The makefiles of the directories in ${MAKE_SUBDIR}.
+SUBDIR_MAKEFILES = @SUBDIR_MAKEFILES@
+
+## Subdirectories to `make install-arch-dep' recursively
+INSTALL_ARCH_DEP_SUBDIR = @INSTALL_ARCH_DEP_SUBDIR@
+
+## Subdirectories to install, and where they'll go.
+## lib-src's makefile knows how to install it, so we don't do that here.
+## When installing the info files, we need to do special things to
+## avoid nuking an existing dir file, so we don't do that here;
+## instead, we have written out explicit code in the `install' targets.
+COPYDIR = ${srcdir}/etc ${srcdir}/lisp
+COPYDESTS = ${etcdir} ${lispdir}
+GENERATED_HEADERS = src/paths.h src/Emacs.ad.h src/puresize-adjust.h src/config.h lwlib/config.h src/sheap-adjust.h
+GENERATED_LISP = lisp/finder-inf.el
+
+all: ${PROGNAME} all-elc info
+
+${PROGNAME}: ${GENERATED_HEADERS} ${MAKE_SUBDIR} ${GENERATED_LISP}
+
+## For performance and consistency, no built-in rules
+.SUFFIXES:
+
+.NO_PARALLEL: ${GENERATED_HEADERS} ${MAKE_SUBDIR} dump-elcs
+.PHONY: ${SUBDIR} all beta all-elc all-elcs dump-elc dump-elcs autoloads finder
+
+## Convenience target for XEmacs beta testers
+beta: clean all-elc finder
+
+## Convenience target for XEmacs maintainers
+## This would run `make-xemacsdist' if I were really confident that everything
+## was turnkey.
+dist: all-elc info
+
+## Convenience target for XEmacs maintainers
+## Updates some rarely generated files:
+## - configure from configure.in
+## - config.values.in from configure
+## - src/depend from src/*.[ch]
+.PHONY: config configure depend
+config: configure depend
+configure: ${srcdir}/configure
+${srcdir}/configure: ${srcdir}/configure.in
+ cd ${srcdir} && autoconf
+ cd ${srcdir} && /bin/sh lib-src/config.values.sh
+
+depend ${srcdir}/src/depend:
+ cd ${srcdir}/src && \
+ perl ./make-src-depend > depend.tmp && \
+ $(RM) depend && mv depend.tmp depend
+
+## Build XEmacs and recompile out-of-date and missing .elc files along
+## the way.
+all-elc all-elcs: lib-src lwlib dump-elcs src
+ MAKE='$(MAKE)' EMACS='./src/$(PROGNAME)' sh ${srcdir}/lib-src/update-elc.sh
+
+## Sub-target for all-elc.
+dump-elc dump-elcs: ${GENERATED_HEADERS} FRC.dump-elcs
+ cd ./src && $(RECURSIVE_MAKE) dump-elcs
+
+autoloads: src
+ MAKE='$(MAKE)' EMACS='./src/$(PROGNAME)' sh ${srcdir}/lib-src/update-autoloads.sh
+
+custom-loads:
+ MAKE='$(MAKE)' EMACS='./src/$(PROGNAME)' sh ${srcdir}/lib-src/update-custom.sh
+
+finder: src
+ @echo "Building finder database ..."
+ @(cd ./lisp; \
+ ${blddir}/src/${PROGNAME} -batch -vanilla \
+ -eval '(setq finder-compile-keywords-quiet t)' \
+ -l finder -f finder-compile-keywords )
+ @echo "Building finder database ...(done)"
+
+lisp/finder-inf.el:
+ @echo "Building finder database ..."
+ @(cd ./lisp; \
+ ${blddir}/src/${PROGNAME} -batch -vanilla \
+ -eval '(setq finder-compile-keywords-quiet t)' \
+ -l finder -f finder-compile-keywords )
+ @echo "Building finder database ...(done)"
+
+## We have to force the building of Emacs.ad.h as well in order to get it
+## updated correctly when VPATH is being used. Since we use move-if-change,
+## it will only actually change if the user modified ${etcdir}/Emacs.ad.
+src/Emacs.ad.h: ${srcdir}/etc/Emacs.ad
+ @echo "Producing \`src/Emacs.ad.h' from \`etc/Emacs.ad'."
+ @$(RM) src/Emacs.ad.h
+ @(echo "/* Do not edit this file!" ; \
+ echo " Automatically generated from ${srcdir}/etc/Emacs.ad" ; \
+ echo " */" ; \
+ /bin/sh ${srcdir}/lib-src/ad2c ${srcdir}/etc/Emacs.ad ) > \
+ src/Emacs.ad.h
+
+src/puresize-adjust.h: ${srcdir}/src/puresize.h
+ @echo "Resetting \`src/puresize-adjust.h'."; \
+ (echo "/* Do not edit this file!" ; \
+ echo " Automatically generated by XEmacs */" ; \
+ echo "#define PURESIZE_ADJUSTMENT 0") > $@
+
+src/sheap-adjust.h:
+ @echo "Resetting \`src/sheap-adjust.h'."; \
+ (echo "/* Do not edit this file!" ; \
+ echo " Automatically generated by XEmacs */" ; \
+ echo "#define SHEAP_ADJUSTMENT 0") > $@
+
+src: @SRC_SUBDIR_DEPS@ FRC.src
+pkg-src/tree-x: pkg-src/FRC.tree-x
+lib-src: FRC.lib-src
+lwlib: FRC.lwlib
+dynodump: FRC.dynodump
+FRC.src FRC.lib-src FRC.lwlib FRC.dynodump pkg-src/FRC.tree-x:
+FRC.lisp.finder-inf.el:
+
+${SUBDIR}: ${SUBDIR_MAKEFILES} ${GENERATED_HEADERS} FRC
+ cd ./$@ && $(RECURSIVE_MAKE) all
+
+Makefile: ${srcdir}/Makefile.in config.status
+ ./config.status
+
+src/Makefile: ${srcdir}/src/Makefile.in.in ${srcdir}/src/depend config.status
+ ./config.status
+
+lib-src/Makefile: ${srcdir}/lib-src/Makefile.in.in config.status
+ ./config.status
+
+lwlib/Makefile: ${srcdir}/lwlib/Makefile.in.in config.status
+ ./config.status
+
+pkg-src/tree-x/Makefile: ${srcdir}/pkg-src/tree-x/Makefile.in.in config.status
+ ./config.status
+
+src/config.h: ${srcdir}/src/config.h.in
+ ./config.status && touch $@
+
+src/paths.h: ${srcdir}/src/paths.h.in
+ ./config.status && touch $@
+
+lwlib/config.h: ${srcdir}/lwlib/config.h.in
+ ./config.status && touch $@
+
+## ==================== Installation ====================
+
+## If we let lib-src do its own installation, that means we
+## don't have to duplicate the list of utilities to install in
+## this Makefile as well.
+
+## On AIX, use tar xBf.
+## On Xenix, use tar xpf.
+
+.PHONY: install-only install install-arch-dep install-arch-indep gzip.el mkdir
+.PHONY: check-features
+
+## We delete each directory in ${COPYDESTS} before we copy into it;
+## that way, we can reinstall over directories that have been put in
+## place with their files read-only (perhaps because they are checked
+## into RCS). In order to make this safe, we make sure that the
+## source exists and is distinct from the destination.
+
+## FSF doesn't depend on `all', but rather on ${MAKE_SUBDIR}, so that
+## they "won't ever modify src/paths.h". But that means you can't do
+## 'make install' right off the bat because src/paths.h won't exist.
+## And, in XEmacs case, src/Emacs.ad.h won't exist either. I also
+## don't see the point in avoiding modifying paths.h. It creates an
+## inconsistency in the build process. So we go ahead and depend on
+## all. --cet
+
+check-features: all
+ ${blddir}/src/${PROGNAME} -batch -l check-features.el
+
+install-only: ${MAKE_SUBDIR} check-features install-arch-dep install-arch-indep
+
+install: all check-features install-arch-dep install-arch-indep
+
+install-arch-dep: mkdir
+ for subdir in ${INSTALL_ARCH_DEP_SUBDIR}; do \
+ (cd ./$${subdir} && $(RECURSIVE_MAKE) install prefix=${prefix} \
+ exec_prefix=${exec_prefix} bindir=${bindir} libdir=${libdir} \
+ archlibdir=${archlibdir}) ; done
+ if test "`(cd ${archlibdir} && $(pwd))`" != \
+ "`(cd ./lib-src && $(pwd))`"; then \
+ if test -f ../Installation; then \
+ ${INSTALL_DATA} ../Installation ${archlibdir}/Installation; \
+ fi; \
+ for f in DOC config.values; do \
+ ${INSTALL_DATA} lib-src/$${f} ${archlibdir}/$${f}; \
+ done ; \
+ for subdir in `find ${archlibdir} -type d ! -name RCS ! -name SCCS ! -name CVS -print` ; \
+ do (cd $${subdir} && $(RM) -r RCS CVS SCCS \#* *~) ; done ; \
+ else true; fi
+ ${INSTALL_PROGRAM} src/${PROGNAME} ${bindir}/${PROGNAME}-${version}
+ -chmod 0755 ${bindir}/${PROGNAME}-${version}
+ cd ${bindir} && $(RM) ./${PROGNAME} && ${LN_S} ${PROGNAME}-${version} ./${PROGNAME}
+ if test "${prefix}" != "${exec_prefix}"; then \
+ for dir in \
+ lib/${PROGNAME} \
+ lib/${PROGNAME}-${version}/etc \
+ lib/${PROGNAME}-${version}/info \
+ lib/${PROGNAME}-${version}/lisp; do \
+ if test ! -d ${exec_prefix}/$${dir}; then \
+ $(LN_S) ${prefix}/$${dir} ${exec_prefix}/$${dir}; fi; \
+ done; \
+ fi
+
+install-arch-indep: mkdir info
+ -@set ${COPYDESTS} ; \
+ for dir in ${COPYDIR} ; do \
+ if test "`(cd $$1 && $(pwd))`" != \
+ "`(cd $${dir} && $(pwd))`"; then \
+ : do nothing - echo "rm -rf $$1" ; \
+ fi ; \
+ shift ; \
+ done
+ -set ${COPYDESTS} ; \
+ for dir in ${COPYDESTS} ; do \
+ if test ! -d $${dir} ; then mkdir $${dir} ; fi ; \
+ done ; \
+ for dir in ${COPYDIR} ; do \
+ dest=$$1 ; shift ; \
+ test -d $${dir} \
+ -a "`(cd $${dir} && $(pwd))`" != \
+ "`(cd $${dest} && $(pwd))`" \
+ && (echo "Copying $${dir}..." ; \
+ (cd $${dir} && tar -cf - . ) | \
+ (cd $${dest} && umask 022 && tar -xf - );\
+ chmod 0755 $${dest}; \
+ for subdir in `find $${dest} -type d ! -name RCS ! -name SCCS ! -name CVS -print` ; do \
+ (cd $${subdir} && $(RM) -r RCS CVS SCCS \#* *~) ; \
+ done) ; \
+ done
+ if test "`(cd ${srcdir}/info && $(pwd))`" != \
+ "`(cd ${infodir} && $(pwd))`" && cd ${srcdir}/info; then \
+ if test ! -f ${infodir}/dir -a -f dir ; then \
+ ${INSTALL_DATA} ${srcdir}/info/dir ${infodir}/dir ; \
+ fi ; \
+ for file in *.info* ; do \
+ ${INSTALL_DATA} $${file} ${infodir}/$${file} ; \
+ chmod 0644 ${infodir}/$${file}; \
+ done ; \
+ fi
+ ## Note it's `xemacs' not ${PROGNAME}
+ cd ${srcdir}/etc && \
+ for page in xemacs etags ctags gnuserv gnuclient gnuattach gnudoit; do \
+ ${INSTALL_DATA} ${srcdir}/etc/$${page}.1 ${mandir}/$${page}${manext} ; \
+ chmod 0644 ${mandir}/$${page}${manext} ; \
+ done
+ @echo "If you would like to save approximately 2M of disk space, do"
+ @echo "make gzip-el"
+ @echo "or you may run "
+ @echo ${srcdir}/lib-src/gzip-el.sh lispdir " from the command line."
+ @echo "Where lispdir is where the lisp files were installed, i.e.,"
+ @echo "${lispdir}"
+
+gzip-el:
+ ${srcdir}/lib-src/gzip-el.sh ${lispdir}
+
+MAKEPATH=./lib-src/make-path
+## Build all the directories to install XEmacs in.
+## Since we may be creating several layers of directories,
+## (e.g. /usr/local/lib/${PROGNAME}-20.5/sparc-sun-solaris2.6), we use
+## make-path instead of mkdir. Not all mkdirs have the `-p' flag.
+mkdir: FRC.mkdir
+ ${MAKEPATH} ${COPYDESTS} ${lockdir} ${infodir} ${archlibdir} \
+ ${mandir} ${bindir} ${datadir} ${libdir} ${pkgdir}
+ -chmod 0777 ${lockdir}
+
+## Delete all the installed files that the `install' target would
+## create (but not the noninstalled files such as `make all' would
+## create).
+
+#### Don't delete the lisp and etc directories if they're in the source tree.
+#### This target has not been updated in sometime and until it is it
+#### would be extremely dangerous for anyone to use it.
+##uninstall:
+## (cd ./lib-src; \
+## $(RECURSIVE_MAKE) uninstall \
+## prefix=${prefix} exec_prefix=${exec_prefix} \
+## bindir=${bindir} libdir=${libdir} archlibdir=${archlibdir})
+## for dir in ${lispdir} ${etcdir} ; do \
+## case `(cd $${dir} ; $(pwd))` in \
+## `(cd ${srcdir} ; $(pwd))`* ) ;; \
+## * ) $(RM) $${dir} ;; \
+## esac ; \
+## case $${dir} in \
+## ${datadir}/${PROGNAME}/${version}/* ) \
+## $(RM) -r ${datadir}/${PROGNAME}/${version} \
+## ;; \
+## esac ; \
+## done
+## cd ${infodir} && $(RM) cl* ${PROGNAME}* forms* info* vip*
+## cd ${mandir} && $(RM) xemacs.1 etags.1 ctags.1 gnuserv.1
+## cd ${bindir} && $(RM) ${PROGNAME}-${version} ${PROGNAME}
+
+
+## Some makes seem to remember that they've built something called FRC,
+## so you can only use a given FRC once per makefile.
+FRC FRC.src.paths.h FRC.mkdir FRC.dump-elcs FRC.info:
+FRC.mostlyclean FRC.clean FRC.distclean FRC.realclean FRC.tags:
+
+## ==================== Cleaning up and miscellanea ====================
+
+.PHONY: mostlyclean clean distclean realclean extraclean
+
+## `mostlyclean'
+## Like `clean', but may refrain from deleting a few files that people
+## normally don't want to recompile. For example, the `mostlyclean'
+## target for GCC does not delete `libgcc.a', because recompiling it
+## is rarely necessary and takes a lot of time.
+mostlyclean: FRC.mostlyclean
+ for d in $(SUBDIR); do (cd ./$$d && $(RECURSIVE_MAKE) $@); done
+
+## `clean'
+## Delete all files from the current directory that are normally
+## created by building the program. Don't delete the files that
+## record the configuration. Also preserve files that could be made
+## by building, but normally aren't because the distribution comes
+## with them.
+
+## Delete `.dvi' files here if they are not part of the distribution.
+clean: FRC.clean
+ for d in $(SUBDIR); do (cd ./$$d && $(RECURSIVE_MAKE) $@); done
+ $(RM) core
+
+## `distclean'
+## Delete all files from the current directory that are created by
+## configuring or building the program. If you have unpacked the
+## source and built the program without creating any other files,
+## `make distclean' should leave only the files that were in the
+## distribution.
+top_distclean=\
+ $(RM) config.status config.log config-tmp-* build-install Installation ; \
+ for d in src lib-src lwlib dynodump ; do \
+ $(RM) $$d/Makefile $$d/Makefile.in ; \
+ done ; \
+ $(RM) core .sbinit Makefile Makefile.in lock/*; \
+ $(RM) lisp/finder-inf.el* Installation.el Installation.elc; \
+ $(RM) packages mule-packages site-lisp
+
+distclean: FRC.distclean
+ for d in $(SUBDIR); do (cd ./$$d && $(RECURSIVE_MAKE) $@); done
+ -${top_distclean}
+
+## `realclean'
+## Delete everything from the current directory that can be
+## reconstructed with this Makefile. This typically includes
+## everything deleted by distclean, plus more: C source files
+## produced by Bison, tags tables, info files, and so on.
+
+## One exception, however: `make realclean' should not delete
+## `configure' even if `configure' can be remade using a rule in the
+## Makefile. More generally, `make realclean' should not delete
+## anything that needs to exist in order to run `configure' and then
+## begin to build the program.
+realclean: FRC.realclean
+ for d in $(SUBDIR); do (cd ./$$d && $(RECURSIVE_MAKE) $@); done
+ -${top_distclean}
+ $(RM) TAGS
+
+## This doesn't actually appear in the coding standards, but Karl
+## says GCC supports it, and that's where the configuration part of
+## the coding standards seem to come from. It's like distclean, but
+## it deletes backup and autosave files too.
+extraclean:
+ for d in $(SUBDIR); do (cd ./$$d && $(RECURSIVE_MAKE) $@); done
+ $(RM) *~ \#*
+ -${top_distclean}
+
+## Unlocking and relocking. The idea of these productions is to reduce
+## hassles when installing an incremental tar of XEmacs. Do `make unlock'
+## before unlocking the file to take the write locks off all sources so
+## that tar xvof will overwrite them without fuss. Then do `make relock'
+## afterward so that VC mode will know which files should be checked in
+## if you want to mung them.
+
+## Note: it's no disaster if these productions miss a file or two; tar
+## and VC will swiftly let you know if this happens, and it is easily
+## corrected.
+SOURCES = ChangeLog GETTING.GNU.SOFTWARE INSTALL Makefile.in PROBLEMS \
+ README build-install.in configure make-dist move-if-change
+
+.PHONY: unlock relock TAGS tags check dist info dvi mcs
+
+unlock:
+ chmod u+w $(SOURCES) cpp/*
+ -cd ./elisp && chmod u+w Makefile README *.texi
+ for d in src etc lib-src lisp; do (cd ./$$d && $(RECURSIVE_MAKE) $@); done
+ cd ./lisp/term && chmod u+w README *.el
+ cd ./man && chmod u+w *texi* ChangeLog split-man
+ cd ./lwlib && chmod u+w *.[ch] Makefile.in.in
+
+relock:
+ chmod u-w $(SOURCES) cpp/*
+ -cd ./elisp && chmod u-w Makefile README *.texi
+ for d in src etc lib-src lisp; do (cd ./$$d && $(RECURSIVE_MAKE) $@); done
+ cd ./lisp/term && chmod u+w README *.el
+ cd ./man && chmod u+w *texi* ChangeLog split-man
+ cd ./lwlib && chmod u+w *.[ch] Makefile.in.in
+
+PRUNE_VC = -name SCCS -prune -o -name RCS -prune -o -name CVS -prune -o
+tagslisp = lisp
+TAGS tags: FRC.tags
+ @echo "If you don't have a copy of etags around, then do 'make lib-src' first."
+ $(RM) ${srcdir}/TAGS
+ @PATH=`$(pwd)`/lib-src:$$PATH HOME=/-=-; export PATH HOME; \
+ echo "Using etags from `which etags`."
+ PATH=`$(pwd)`/lib-src:$$PATH ; export PATH; cd ${srcdir} && \
+ find src lwlib lib-src ${PRUNE_VC} -name '*.[ch]' -print | \
+ xargs etags -a -r '/[ ]*DEF\(VAR\|INE\)_[A-Z_]+[ ]*([ ]*"\([^"]+\)"/\2/'; \
+ find ${tagslisp} ${PRUNE_VC} -name '*.el' ! -name 'auto-autoloads.el' -print | \
+ xargs etags -a -l none -r "/^(def\\(var\\|un\\|alias\\|const\\|macro\\|subst\\|struct\\|face\\|group\\|custom\\|ine-\\(function\\|compiler-macro\\|[a-z-]+alias\\)\\)[ ]+'?\\([^ ]+\\)/\\3/"
+
+check:
+ cd ./src && $(RECURSIVE_MAKE) $@
+
+info: FRC.info
+ cd ${srcdir}/man && $(RECURSIVE_MAKE) $@
+
+dvi:
+ cd ${srcdir}/man && $(RECURSIVE_MAKE) $@
+
+## Fix up version information in executables (Solaris-only)
+mcs:
+ date=`LANG=C LC_ALL=C date -u '+%e %b %Y'`; \
+ ident="@(#)RELEASE VERSION XEmacs ${version} $${date}"; \
+ for f in `file lib-src/* src/${PROGNAME} | grep ELF | sed -e 's/:.*//'`; do \
+ mcs -da "$${ident} `echo $${f} | sed 's/.*\///'`" $${f}; \
+ done
projects / chise / xemacs-chise.git.1 / commitdiff