\input texinfo
+@include gnus-overrides-ja.texi
+
@setfilename emacs-mime-ja
@settitle Emacs MIME Manual
@synindex fn cp
@synindex vr cp
@synindex pg cp
+@iftex
+@firstparagraphindent insert
+@end iftex
@copying
-This file documents the Emacs MIME interface functionality.
+\e$B$3$N%U%!%$%k$O\e(B Emacs MIME \e$B%$%s%?!<%U%'!<%9$N5!G=$rJ8=q2=$7$?$b$N$G$9!#\e(B
-Copyright (C) 1998, 1999, 2000, 2001, 2002, 2003
- Free Software Foundation, Inc.
+Copyright @copyright{} 1998-2012 Free Software Foundation, Inc.
@quotation
Permission is granted to copy, distribute and/or modify this document
-under the terms of the GNU Free Documentation License, Version 1.1 or
+under the terms of the GNU Free Documentation License, Version 1.3 or
any later version published by the Free Software Foundation; with no
-Invariant Sections, with the Front-Cover texts being ``A GNU
-Manual'', and with the Back-Cover Texts as in (a) below. A copy of the
-license is included in the section entitled ``GNU Free Documentation
-License'' in the Emacs manual.
+Invariant Sections, with the Front-Cover texts being ``A GNU Manual'',
+and with the Back-Cover Texts as in (a) below. A copy of the license
+is included in the section entitled ``GNU Free Documentation License''.
\e$B$3$NJ8=q$r!"%U%j!<%=%U%H%&%'%":bCDH/9T$N\e(B GNU \e$B%U%j!<J8=qMxMQ5vBz7@Ls=q\e(B
-\e$BBh\e(B 1.1 \e$BHG$^$?$O$=$l0J9_$NHG$,Dj$a$k>r7o$N2<$GJ#@=!"G[I[!"$"$k$$$OJQ99$9\e(B
-\e$B$k$3$H$r5v2D$7$^$9!#JQ99IT2DItJ,$O;XDj$7$^$;$s!#!V\e(BA GNU Manual\e$B!W$OI=I=;f\e(B
+\e$BBh\e(B 1.3 \e$BHG$^$?$O$=$l0J9_$NHG$,Dj$a$k>r7o$N2<$GJ#@=!"G[I[!"$"$k$$$OJQ99$9\e(B
+\e$B$k$3$H$r5v2D$7$^$9!#JQ99IT2DItJ,$O;XDj$7$^$;$s!#!H\e(BA GNU Manual\e$B!I$OI=I=;f\e(B
\e$B%F%-%9%H!"0J2<$N\e(B (a) \e$B$ON"I=;f%F%-%9%H$G$9!#$3$NMxMQ5vBz7@Ls=q$NJ#<L$O\e(B
-\e$B!V\e(BEmacs manual\e$B!W$N!V\e(BGNU \e$B%U%j!<J8=qMxMQ5vBz7@Ls=q!W$H$$$&>O$K4^$^$l$F$$$^\e(B
-\e$B$9!#\e(B
+\e$B!V\e(BGNU \e$B%U%j!<J8=qMxMQ5vBz7@Ls=q!W$H$$$&>O$K4^$^$l$F$$$^$9!#\e(B
-(a) The FSF's Back-Cover Text is: ``You have freedom to copy and modify
-this GNU Manual, like GNU software. Copies published by the Free
-Software Foundation raise funds for GNU development.''
+(a) The FSF's Back-Cover Text is: ``You have the freedom to copy and
+modify this GNU manual. Buying copies from the FSF supports it in
+developing GNU and promoting software freedom.''
-(a) FSF \e$B$NN"I=;f%F%-%9%H\e(B:\e$B!V$"$J$?$K$O$3$N\e(B GNU Manual \e$B$r\e(B GNU \e$B%=%U%H%&%'%"\e(B
-\e$B$N$h$&$KJ#@=$7$?$jJQ99$9$k<+M3$,$"$j$^$9!#J#@=$O%U%j!<%=%U%H%&%'%":bCD$K\e(B
-\e$B$h$C$F=PHG$5$l$^$7$?!#\e(B(\e$B%U%j!<%=%U%H%&%'%":bCD$O\e(B) GNU \e$B$N3+H/$N$?$a$KI,MW\e(B
-\e$B$J;q6b$r=8$a$F$$$^$9!#!W\e(B
-
-This document is part of a collection distributed under the GNU Free
-Documentation License. If you want to distribute this document
-separately from the collection, you can do so by adding a copy of the
-license to the document, as described in section 6 of the license.
-
-\e$B$3$NJ8=q$O!V\e(BGNU \e$B%U%j!<J8=qMxMQ5vBz7@Ls=q!W$K4p$E$$$FG[I[$5$l$?<}=8Cx:nJ*\e(B
-\e$B$N0lIt$G$9!#$b$7$"$J$?$,$3$NJ8=q$r<}=8Cx:nJ*$+$iJ,N%$7$FG[I[$7$?$$$H$-$O!"\e(B
-\e$B7@Ls=q$NBh\e(B 6 \e$B9`$K5-=R$5$l$F$$$k$h$&$K!"J8=q$K7@Ls=q$NJ#<L$rIU2C$9$k$3$H\e(B
-\e$B$K$h$C$F!"9T$J$&$3$H$,$G$-$^$9!#\e(B
+(a) FSF \e$B$NN"I=;f%F%-%9%H\e(B:\e$B!V$"$J$?$K$O$3$N\e(B GNU Manual \e$B$rJ#@=$7$?$jJQ99$9\e(B
+\e$B$k<+M3$,$"$j$^$9!#\e(BFSF \e$B$+$i$NJ#<L$N9XF~$O\e(B GNU \e$B$N3+H/$H%=%U%H%&%'%"$N<+M3\e(B
+\e$B$NB%?J$r;Y1g$7$^$9!#!W\e(B
@end quotation
@end copying
-@dircategory Emacs
+@c Node ``Interface Functions'' uses Latin-1 characters
+@c @documentencoding ISO-8859-1
+@c
+@dircategory Emacs lisp libraries
@direntry
-* Emacs MIME: (emacs-mime-ja). Emacs MIME de/composition library.
+* Emacs MIME-ja: (emacs-mime-ja).
+ Emacs MIME de/composition library
+ (Japanese).
@end direntry
@iftex
@finalout
@setchapternewpage odd
@titlepage
+@ifset WEBHACKDEVEL
+@title Emacs MIME Manual (DEVELOPMENT VERSION)
+@end ifset
+@ifclear WEBHACKDEVEL
@title Emacs MIME Manual
+@end ifclear
@author by Lars Magne Ingebrigtsen
@page
@insertcopying
@end titlepage
+@contents
+
@node Top
@top Emacs MIME
-This manual documents the libraries used to compose and display
-@acronym{MIME} messages.
+\e$B$3$N%^%K%e%"%k$O\e(B @acronym{MIME} \e$B%a%C%;!<%8$N:n@.$HI=<($K;H$o$l$k%i%$%V%i\e(B
+\e$B%j!<$rJ8=q2=$7$?$b$N$G$9!#\e(B
-This manual is directed at users who want to modify the behavior of
-the @acronym{MIME} encoding/decoding process or want a more detailed
-picture of how the Emacs @acronym{MIME} library works, and people who want
-to write functions and commands that manipulate @acronym{MIME} elements.
+\e$B$3$N%^%K%e%"%k$O\e(B @acronym{MIME} \e$B$N%(%s%3!<%I\e(B/\e$B%G%3!<%I=hM}$N?6$kIq$$$rJQ\e(B
+\e$B99$7$?$$MxMQ<T!"\e(BEmacs @acronym{MIME} \e$B%i%$%V%i%j!<$,$I$N$h$&$KF0:n$9$k$+\e(B
+\e$B$r$b$C$H>\$7$/CN$j$?$$MxMQ<T!"$*$h$S\e(B @acronym{MIME} \e$B$NMWAG$rA`:n$9$k4X?t\e(B
+\e$B$dL?Na$r=q$-$?$$?M$?$A$rBP>]$K$7$F$$$^$9!#\e(B
-@acronym{MIME} is short for @dfn{Multipurpose Internet Mail Extensions}.
-This standard is documented in a number of RFCs; mainly RFC2045 (Format
-of Internet Message Bodies), RFC2046 (Media Types), RFC2047 (Message
-Header Extensions for Non-@acronym{ASCII} Text), RFC2048 (Registration
-Procedures), RFC2049 (Conformance Criteria and Examples). It is highly
-recommended that anyone who intends writing @acronym{MIME}-compliant software
-read at least RFC2045 and RFC2047.
+@acronym{MIME} \e$B$O\e(B @dfn{Multipurpose Internet Mail Extensions} \e$B$N>JN,I=5-\e(B
+\e$B$G$9!#$3$NI8=`$OB??t$N\e(B RFC \e$B$KJ8=q2=$5$l$F$$$F!"<g$J$b$N$O<!$NDL$j$G$9\e(B:
+RFC2045 (\e$B%$%s%?!<%M%C%H!&%a%C%;!<%8$NK\J8$N=q<0\e(B), RFC2046 (\e$B%a%G%#%"%?%$\e(B
+\e$B%W\e(B), RFC2047 (\e$BHs\e(B-@acronym{ASCII} \e$B%F%-%9%H$N$?$a$N%a%C%;!<%8%X%C%@!<$N3H\e(B
+\e$BD%\e(B), RFC2048 (\e$BEPO?<jB3\e(B), RFC2049 (\e$BE,9g4p=`$H;vNc\e(B)\e$B!#\e(B@acronym{MIME} \e$B$K=`5r\e(B
+\e$B$7$?%=%U%H%&%'%"$r=q$3$&$H;W$C$F$$$k?M$OC/$G$b!">/$J$/$H\e(B
+\e$B$b\e(B RFC2045 \e$B$H\e(B RFC2047 \e$B$OFI$s$G$*$/$3$H$r6/$/4+$a$^$9!#\e(B
+
+@ifnottex
+@insertcopying
+@end ifnottex
@menu
-* Decoding and Viewing:: A framework for decoding and viewing.
-* Composing:: @acronym{MML}; a language for describing @acronym{MIME} parts.
-* Interface Functions:: An abstraction over the basic functions.
-* Basic Functions:: Utility and basic parsing functions.
-* Standards:: A summary of RFCs and working documents used.
-* Index:: Function and variable index.
+* Decoding and Viewing:: \e$B%G%3!<%I$HI=<($N$?$a$NOHAH$_\e(B
+* Composing:: @acronym{MML}; @acronym{MIME} \e$B%Q!<%H5-=RMQ8@8l\e(B
+* Interface Functions:: \e$B4pK\E*$J4X?t$NCj>]2=\e(B
+* Basic Functions:: \e$B%f!<%F%#%j%F%#!<$*$h$S4pK\E*$J2r@O$N$?$a$N4X?t\e(B
+* Standards:: \e$B;H$o$l$F$$$k\e(B RFC \e$B$H:n6HJ8=q$N35N,\e(B
+* GNU Free Documentation License:: \e$B$3$NJ8=q$NMxMQ5vBz7@Ls=q\e(B
+* Index:: \e$B4X?t$*$h$SJQ?t$N:w0z\e(B
@end menu
-
@node Decoding and Viewing
-@chapter Decoding and Viewing
+@chapter \e$B%G%3!<%I$HI=<(\e(B
-This chapter deals with decoding and viewing @acronym{MIME} messages on a
-higher level.
+\e$B$3$N>O$O!">e0L3,AX$G$N\e(B @acronym{MIME} \e$B%a%C%;!<%8$N%G%3!<%I$HI=<($r07$$$^\e(B
+\e$B$9!#\e(B
-The main idea is to first analyze a @acronym{MIME} article, and then allow
-other programs to do things based on the list of @dfn{handles} that are
-returned as a result of this analysis.
+\e$B$=$N<g$JL\E*$O!":G=i$K\e(B @acronym{MIME} \e$B$N5-;v$r2r@O$7$F$+$i!"$=$N2r@O$N7k\e(B
+\e$B2L$H$7$FJV$5$l$k!V%O%s%I%k!W$N%j%9%H$K4p$E$$$F!"B>$N%W%m%0%i%`$,=hM}$r9T\e(B
+\e$B$J$&$3$H$,$G$-$k$h$&$K$9$k$3$H$G$9!#\e(B
@menu
-* Dissection:: Analyzing a @acronym{MIME} message.
-* Non-MIME:: Analyzing a non-@acronym{MIME} message.
-* Handles:: Handle manipulations.
-* Display:: Displaying handles.
-* Display Customization:: Variables that affect display.
-* Files and Directories:: Saving and naming attachments.
-* New Viewers:: How to write your own viewers.
+* Dissection:: @acronym{MIME} \e$B%a%C%;!<%8$N2r@O\e(B
+* Non-MIME:: \e$BHs\e(B-@acronym{MIME} \e$B%a%C%;!<%8$N2r@O\e(B
+* Handles:: \e$B%O%s%I%k$N<h$j07$$\e(B
+* Display:: \e$B%O%s%I%k$NI=<(\e(B
+* Display Customization:: \e$BI=<($K1F6A$r5Z$\$9JQ?t\e(B
+* Files and Directories:: \e$BE:IU%U%!%$%k$NJ]B8$HL?L>\e(B
+* New Viewers:: \e$B<+J,MQ%S%e!<%o!<$N=q$-J}\e(B
@end menu
-
@node Dissection
-@section Dissection
+@section \e$B2rBN\e(B
-The @code{mm-dissect-buffer} is the function responsible for dissecting
-a @acronym{MIME} article. If given a multipart message, it will recursively
-descend the message, following the structure, and return a tree of
-@acronym{MIME} handles that describes the structure of the message.
+@code{mm-dissect-buffer} \e$B$O\e(B @acronym{MIME} \e$B5-;v$N2rBN$rC4Ev$9$k4X?t$G$9!#\e(B
+\e$B%^%k%A%Q!<%H$N%a%C%;!<%8$,M?$($i$l$k$H!"%a%C%;!<%8$r:F5"E*$K7!$j2<$2$F9=\e(B
+\e$BB$$r$?$I$j!"$=$N%a%C%;!<%8$N9=B$$rIA<L$9$k\e(B @acronym{MIME} \e$B%O%s%I%k$NLZ9=\e(B
+\e$BB$$rJV$7$^$9!#\e(B
@node Non-MIME
-@section Non-MIME
+@section \e$BHs\e(B-MIME
@vindex mm-uu-configure-list
-Gnus also understands some non-@acronym{MIME} attachments, such as
-postscript, uuencode, binhex, yenc, shar, forward, gnatsweb, pgp,
-diff. Each of these features can be disabled by add an item into
-@code{mm-uu-configure-list}. For example,
+Gnus \e$B$O$$$/$D$+$N\e(B @acronym{MIME} \e$B$G$O$J$$E:IU%U%!%$%k$bM}2r$7$^$9!#$=$l\e(B
+\e$B$i$O\e(B postscript, uuencode, binhex, yenc, shar, forward, gnatsweb, pgp,
+diff \e$B$N$h$&$J$b$N$G$9!#$=$l$>$l$N5!G=$O!"\e(B@code{mm-uu-configure-list} \e$B$K\e(B
+\e$B9`L\$rDI2C$9$k$3$H$K$h$C$FL58z$K$9$k$3$H$,$G$-$^$9!#Nc$G$9!#\e(B
@lisp
(require 'mm-uu)
@table @code
@item postscript
@findex postscript
-Postscript file.
+\e$B%]%9%H%9%/%j%W%H$N%U%!%$%k!#\e(B
@item uu
@findex uu
-Uuencoded file.
+Uuencode \e$B$5$l$?%U%!%$%k!#\e(B
@item binhex
@findex binhex
-Binhex encoded file.
+Binhex \e$B$G%(%s%3!<%I$5$l$?%U%!%$%k!#\e(B
@item yenc
@findex yenc
-Yenc encoded file.
+Yenc \e$B$G%(%s%3!<%I$5$l$?%U%!%$%k!#\e(B
@item shar
@findex shar
-Shar archive file.
+Shar \e$B$G:n$i$l$?%"!<%+%$%V!&%U%!%$%k!#\e(B
@item forward
@findex forward
-Non-@acronym{MIME} forwarded message.
+@acronym{MIME} \e$B$r;H$o$:$KE>Aw$5$l$?%a%C%;!<%8!#\e(B
@item gnatsweb
@findex gnatsweb
-Gnatsweb attachment.
+Gnatsweb \e$B$NE:IU%U%!%$%k!#\e(B
@item pgp-signed
@findex pgp-signed
-@acronym{PGP} signed clear text.
+@acronym{PGP} \e$B$G=pL>$5$l$?J?J8\e(B (clear text, \e$B$R$i$V$s\e(B)\e$B!#\e(B
@item pgp-encrypted
@findex pgp-encrypted
-@acronym{PGP} encrypted clear text.
+@acronym{PGP} \e$B$G0E9f2=$5$l$?J?J8\e(B (clear text, \e$B$R$i$V$s\e(B)\e$B!#\e(B
@item pgp-key
@findex pgp-key
-@acronym{PGP} public keys.
+@acronym{PGP} \e$B$N8x3+80!#\e(B
@item emacs-sources
@findex emacs-sources
@vindex mm-uu-emacs-sources-regexp
-Emacs source code. This item works only in the groups matching
-@code{mm-uu-emacs-sources-regexp}.
+Emacs \e$B$N%=!<%9%3!<%I!#$3$N9`L\$O\e(B @code{mm-uu-emacs-sources-regexp} \e$B$K9g\e(B
+\e$BCW$9$k%0%k!<%W$G$N$_F0:n$7$^$9!#\e(B
@item diff
@vindex diff
@vindex mm-uu-diff-groups-regexp
-Patches. This is intended for groups where diffs of committed files
-are automatically sent to. It only works in groups matching
-@code{mm-uu-diff-groups-regexp}.
+\e$B%Q%C%A!#$3$l$O!"%3%_%C%H$5$l$?%U%!%$%k$N:9J,$,<+F0E*$KAw$i$l$k%0%k!<%W$r\e(B
+\e$BBP>]$K$7$?$b$N$G$9!#\e(B@code{mm-uu-diff-groups-regexp} \e$B$K9gCW$9$k%0%k!<%W$G\e(B
+\e$B$N$_F0:n$7$^$9!#\e(B
+
+@item verbatim-marks
+@cindex verbatim-marks
+Slrn \e$B$U$&$N\e(B verbatim (\e$BJ8>O$r0l8@0l6g$=$N$^$^I=$9\e(B) \e$B5-9f$NBP!#\e(B
+
+(\e$BLuCm\e(B: @samp{#v+} \e$B$H\e(B @samp{#v-} \e$B$NFs9T$G0O$^$l$?%F%-%9%H\e(B
+\e$B$r\e(B @acronym{MIME} \e$B%Q!<%H$K8+N)$F$^$9!#\e(B)
+@item LaTeX
+@cindex LaTeX
+LaTeX \e$B$NJ88%!#\e(B@code{mm-uu-tex-groups-regexp} \e$B$K9gCW$9$kL>A0$N%0%k!<%W$G\e(B
+\e$B$N$_F0:n$7$^$9!#\e(B
@end table
+@cindex text/x-verbatim
+@c @vindex \e$B$O\e(B face \e$B$N$?$a$KE,@Z$+\e(B?
+@vindex mm-uu-extract
+\e$B$$$/$D$+$N\e(B @acronym{MIME} \e$B$G$O$J$$E:IU$O\e(B @code{mm-uu-extract} \e$B$H$$$&%U%'!<\e(B
+\e$B%9$r;H$C$FI=<($5$l$^$9!#%G%#%U%)%k%H$G$O$=$l$i$N%Q!<%H\e(B
+\e$B$K\e(B @acronym{MIME} \e$B%\%?%s$,IU$-$^$;$s!#\e(B@kbd{K b}
+(@code{gnus-summary-display-buttonized}) \e$B$r;H$&\e(B
+\e$B$+\e(B @code{gnus-buttonized-mime-types} \e$B$K\e(B @code{text/x-verbatim} \e$B$r2C$($k\e(B
+\e$B$3$H$K$h$C$F!"%\%?%s$NI=<($r6/@)$9$k$3$H$,$G$-$^$9!#\e(B@xref{MIME Commands,
+,MIME \e$B%3%^%s%I\e(B, gnus-ja, The Gnus Manual}.
+
+(\e$BLuCm\e(B: \e$B$3$3$GEbFM$K\e(B @code{text/x-verbatim} \e$B$N$3$H$,=P$F$/$k$N$O!"%U%'!<\e(B
+\e$B%9$,;H$o$l$F%\%?%s$,IU$+$J$$BeI=E*$J%Q!<%H$,\e(B @code{verbatim-marks} \e$B$@$+\e(B
+\e$B$i$G$9!#\e(B)
+
@node Handles
-@section Handles
+@section \e$B%O%s%I%k\e(B
-A @acronym{MIME} handle is a list that fully describes a @acronym{MIME}
-component.
+@acronym{MIME} \e$B%O%s%I%k$O!"\e(B@acronym{MIME} \e$B$N9=@.MWAG$r40A4$KIA<L$9$k%j%9\e(B
+\e$B%H$G$9!#\e(B
-The following macros can be used to access elements in a handle:
+\e$B%O%s%I%k$NMWAG$r%"%/%;%9$9$k$?$a$K!"0J2<$N%^%/%m$r;H$&$3$H$,$G$-$^$9\e(B:
@table @code
@item mm-handle-buffer
@findex mm-handle-buffer
-Return the buffer that holds the contents of the undecoded @acronym{MIME}
-part.
+\e$B%G%3!<%I$5$l$F$$$J$$\e(B @acronym{MIME} \e$B%Q!<%H$NFbMFJ*$rJ];}$7$F$$$k%P%C%U%!!<\e(B
+\e$B$rJV$7$^$9!#\e(B
@item mm-handle-type
@findex mm-handle-type
-Return the parsed @code{Content-Type} of the part.
+\e$B%Q!<%H$N2r@O$5$l$?\e(B @code{Content-Type} \e$B$rJV$7$^$9!#\e(B
@item mm-handle-encoding
@findex mm-handle-encoding
-Return the @code{Content-Transfer-Encoding} of the part.
+\e$B%Q!<%H$N\e(B @code{Content-Transfer-Encoding} \e$B$rJV$7$^$9!#\e(B
@item mm-handle-undisplayer
@findex mm-handle-undisplayer
-Return the object that can be used to remove the displayed part (if it
-has been displayed).
+\e$BI=<($5$l$F$$$k%Q!<%H$r>C$9$3$H$,$G$-$k$b$N\e(B (\e$BLuCm\e(B: \e$B4X?t$J$I\e(B) \e$B$r\e(B (\e$B$=$l$,I=\e(B
+\e$B<($5$l$F$$$k>l9g$K\e(B) \e$BJV$7$^$9!#\e(B
@item mm-handle-set-undisplayer
@findex mm-handle-set-undisplayer
-Set the undisplayer object.
-
-@item mm-handle-disposition
-@findex mm-handle-disposition
-Return the parsed @code{Content-Disposition} of the part.
+\e$BI=<($5$l$F$$$k%Q!<%H$r>C$9$3$H$,$G$-$k$b$N\e(B (\e$BLuCm\e(B: \e$B4X?t$J$I\e(B) \e$B$r@_Dj$7$^$9!#\e(B
@item mm-handle-disposition
@findex mm-handle-disposition
-Return the description of the part.
+\e$B%Q!<%H$N2r@O$5$l$?\e(B @code{Content-Disposition} (\e$BLuCm\e(B: \e$BG[CV;XDj\e(B) \e$B$rJV$7$^\e(B
+\e$B$9!#\e(B
@item mm-get-content-id
-Returns the handle(s) referred to by @code{Content-ID}.
-
+@code{Content-ID} \e$B$G;2>H$5$l$k%O%s%I%k\e(B (\e$BC1?t$^$?$OJ#?t\e(B) \e$B$rJV$7$^$9!#\e(B
@end table
-
@node Display
-@section Display
+@section \e$BI=<(\e(B
-Functions for displaying, removing and saving.
+\e$BI=<($7!">C5n$7!"J]B8$9$k$?$a$N4X?t$G$9!#\e(B
@table @code
@item mm-display-part
@findex mm-display-part
-Display the part.
+\e$B%Q!<%H$rI=<($7$^$9!#\e(B
@item mm-remove-part
@findex mm-remove-part
-Remove the part (if it has been displayed).
+\e$B%Q!<%H$r\e(B (\e$B$=$l$,I=<($5$l$F$$$?$i\e(B) \e$B>C5n$7$^$9!#\e(B
@item mm-inlinable-p
@findex mm-inlinable-p
-Say whether a @acronym{MIME} type can be displayed inline.
+@acronym{MIME} \e$B%?%$%W$,%$%s%i%$%s$GI=<(2DG=$+$I$&$+$rJV$7$^$9!#\e(B
@item mm-automatic-display-p
@findex mm-automatic-display-p
-Say whether a @acronym{MIME} type should be displayed automatically.
+@acronym{MIME} \e$B%?%$%W$,<+F0E*$KI=<($5$l$k$Y$-$+$I$&$+$rJV$7$^$9!#\e(B
@item mm-destroy-part
@findex mm-destroy-part
-Free all resources occupied by a part.
+\e$B%Q!<%H$K$h$C$F;H$o$l$F$$$k$9$Y$F$N;q8;$r3+J|$7$^$9\e(B (\e$BLuCm\e(B: \e$B%Q!<%H$NI=<(!"\e(B
+\e$B$*$h$S%Q!<%H$r2rBN$7$FF@$?8D!9$NItIJ$r0l;~E*$KJ];}$7$F$$$k%P%C%U%!!<$d%U%!\e(B
+\e$B%$%k$r>C5n$7$^$9\e(B)\e$B!#\e(B
@item mm-save-part
@findex mm-save-part
-Offer to save the part in a file.
+\e$B%Q!<%H$r%U%!%$%k$KJ]B8$7$^$9!#\e(B
@item mm-pipe-part
@findex mm-pipe-part
-Offer to pipe the part to some process.
+\e$B%Q!<%H$r2?$+$N%W%m%;%9$K%Q%$%W$7$^$9!#\e(B
@item mm-interactively-view-part
@findex mm-interactively-view-part
-Prompt for a mailcap method to use to view the part.
-
+\e$B%Q!<%H$rI=<($9$k$?$a$K;H$&\e(B mailcap \e$B$N<jCJ$rMxMQ<T$,F~NO$9$k$3$H$r5a$a$F!"\e(B
+\e$B$=$l$r;H$C$FI=<($7$^$9!#\e(B
@end table
-
@node Display Customization
-@section Display Customization
+@section \e$BI=<($N%+%9%?%^%$%:\e(B
@table @code
-
@item mm-inline-media-tests
@vindex mm-inline-media-tests
-This is an alist where the key is a @acronym{MIME} type, the second element
-is a function to display the part @dfn{inline} (i.e., inside Emacs), and
-the third element is a form to be @code{eval}ed to say whether the part
-can be displayed inline.
+\e$B$3$l$OO"A[%j%9%H$G$9!#80\e(B (\e$BBh0lMWAG\e(B) \e$B$O\e(B @acronym{MIME} \e$B%?%$%W!"BhFsMWAG$O\e(B
+\e$B%Q!<%H$r!V%$%s%i%$%s!W$G\e(B (\e$B$9$J$o$A\e(B Emacs \e$B$N2hLL$KKd$a9~$s$G\e(B) \e$BI=<($9$k$?\e(B
+\e$B$a$N4X?t!"$=$7$FBh;0MWAG$O$=$N%Q!<%H$,%$%s%i%$%s$GI=<($9$k$3$H$,2DG=$+$I\e(B
+\e$B$&$+$rD4$Y$k$?$a$K\e(B @code{eval} (\e$BI>2A\e(B) \e$B$5$l$k<0$G$9!#\e(B
-This variable specifies whether a part @emph{can} be displayed inline,
-and, if so, how to do it. It does not say whether parts are
-@emph{actually} displayed inline.
+\e$B$3$NJQ?t$O!"$"$k%Q!<%H$,%$%s%i%$%sI=<(2DG=$+$I$&$+$H!"$b$72DG=$J$i$=$N$d\e(B
+\e$B$jJ}$r;XDj$7$^$9!#%Q!<%H$,8=<B$K%$%s%i%$%sI=<($5$l$F$$$k$+$I$&$+$r<($9$b\e(B
+\e$B$N$G$O$"$j$^$;$s!#\e(B
@item mm-inlined-types
@vindex mm-inlined-types
-This, on the other hand, says what types are to be displayed inline, if
-they satisfy the conditions set by the variable above. It's a list of
-@acronym{MIME} media types.
+\e$B0lJ}$3$l$O!">e5-$NJQ?t$K$h$C$F@_Dj$5$l$?>r7o$rK~B-$7$?>l9g$K!"%$%s%i%$%s\e(B
+\e$BI=<($r9T$J$&%?%$%W$r<($7$^$9!#$3$l$O\e(B @acronym{MIME} \e$B%a%G%#%"%?%$%W$N%j%9\e(B
+\e$B%H$G$9!#\e(B(\e$BLuCm\e(B: \e$B$=$l$>$l$NMWAG$O@55,I=8=$G$9!#\e(B)
@item mm-automatic-display
@vindex mm-automatic-display
-This is a list of types that are to be displayed ``automatically'', but
-only if the above variable allows it. That is, only inlinable parts can
-be displayed automatically.
+\e$B$3$l$O>e5-$NJQ?t$,G'$a$k%?%$%W$K8B$C$F!V<+F0E*!W$KI=<($5$l$k%?%$%W$N%j%9\e(B
+\e$B%H$G$9!#$D$^$j!"%$%s%i%$%sI=<($,2DG=$J%Q!<%H$@$1$,<+F0E*$KI=<($5$l$^$9!#\e(B
@item mm-automatic-external-display
@vindex mm-automatic-external-display
-This is a list of types that will be displayed automatically in an
-external viewer.
+\e$B$3$l$O30It%S%e!<%o!<$G<+F0E*$KI=<($5$l$k%?%$%W$N%j%9%H$G$9!#\e(B
@item mm-keep-viewer-alive-types
@vindex mm-keep-viewer-alive-types
-This is a list of media types for which the external viewer will not
-be killed when selecting a different article.
+\e$B$3$l$O!"JL$N5-;v$rA*Br$7$F$b30It%S%e!<%o!<$,\e(B kill \e$B$5$l$J$$%a%G%#%"%?%$%W\e(B
+\e$B$N%j%9%H$G$9!#\e(B
+
+\e$BLuCm\e(B: postscript \e$B$d\e(B dvi \e$B$J$I\e(B (\e$BJQ?t$N%G%#%U%)%k%HCM$r;2>H$N$3$H\e(B) \e$B$N$h$&$K!"\e(B
+\e$BFI$`$N$K;~4V$,$+$+$k$+$b$7$l$J$$%Q!<%H$N%?%$%W$r4^$`%j%9%H$G$9!#0lJ}!"$3\e(B
+\e$B$l$K4^$^$l$J$$C1=c$J2hA|$N%Q!<%H$J$I$O!"$=$l$,4^$^$l$F$$$?5-;v$NI=<($r$d\e(B
+\e$B$a$?$H$-$K!"<+F0E*$K30It%S%e!<%o!<$,\e(B kill \e$B$5$l$^$9!#\e(B
@item mm-attachment-override-types
@vindex mm-attachment-override-types
-Some @acronym{MIME} agents create parts that have a content-disposition of
-@samp{attachment}. This variable allows overriding that disposition and
-displaying the part inline. (Note that the disposition is only
-overridden if we are able to, and want to, display the part inline.)
+\e$B$$$/$D$+$N\e(B @acronym{MIME} \e$B%(!<%8%'%s%H$O!VE:IU%U%!%$%k!W\e(B(attachment) \e$B$N\e(B
+\e$BG[CV;XDj\e(B (content-disposition) \e$B$r;}$D%Q!<%H$r@8@.$7$^$9!#$3$NJQ?t$K4^$^\e(B
+\e$B$l$k\e(B @acronym{MIME} \e$B%?%$%W$N>l9g$O$=$s$JG[CV;XDj$rL5;k$7$F!"$=$N%Q!<%H$r\e(B
+\e$B%$%s%i%$%sI=<($9$k$3$H$,$G$-$k$h$&$K$7$^$9!#\e(B(\e$B$=$N%Q!<%H$r%$%s%i%$%sI=<(\e(B
+\e$B$9$k$3$H$,2DG=$G!";d$?$A$,$=$&$9$k$3$H$rK>$`>l9g$K8B$C$F!"G[CV;XDj$,L5;k\e(B
+\e$B$5$l$k$3$H$KCm0U$7$F$/$@$5$$!#\e(B)
@item mm-discouraged-alternatives
@vindex mm-discouraged-alternatives
-List of @acronym{MIME} types that are discouraged when viewing
-@samp{multipart/alternative}. Viewing agents are supposed to view the
-last possible part of a message, as that is supposed to be the richest.
-However, users may prefer other types instead, and this list says what
-types are most unwanted. If, for instance, @samp{text/html} parts are
-very unwanted, and @samp{text/richtext} parts are somewhat unwanted,
-you could say something like:
+@samp{multipart/alternative} \e$B$K4^$^$l$F$$$k!"8+$?$/$J$$%Q!<%H\e(B
+\e$B$N\e(B @acronym{MIME} \e$B%?%$%W$N%j%9%H$G$9!#%a%C%;!<%8$N8eH>$K$"$k%Q!<%H$,:G$b\e(B
+\e$BK-$+$JFbMF$K$J$C$F$$$k$HA[Dj$7$F$$$k$N$G!"I=<(%(!<%8%'%s%H$O$=$l$rI=<($9\e(B
+\e$B$k$3$H$K$J$C$F$$$^$9!#$7$+$7!"MxMQ<T$OBe$o$j$KB>$N%?%$%W$r8+$k$3$H$r9%$`\e(B
+\e$B$+$b$7$l$^$;$s!#$3$N%j%9%H$O!"$I$s$J%?%$%W$r:G$b8+$?$/$J$$$+$r;XDj$9$k$?\e(B
+\e$B$a$K;H$$$^$9!#Nc$($P$b$7\e(B @samp{text/html} \e$B%Q!<%H$r$<$s$<$s8+$?$/$J$/$F!"\e(B
+@samp{text/richtext} \e$B%Q!<%H$O$"$^$j8+$?$/$J$$$H$$$&$3$H$G$"$l$P!"0J2<$N\e(B
+\e$B$h$&$K@k8@$9$k$3$H$,$G$-$^$9\e(B:
@lisp
(setq mm-discouraged-alternatives
(remove "text/html" mm-automatic-display))
@end lisp
+\e$B$5$i$K!"$3$l$K\e(B @code{"image/.*"} \e$B$rDI2C$9$k$3$H$OLr$KN)$D$G$7$g$&!#\e(B
+Spammers \e$B$O\e(B @samp{multipart/alternative} \e$B%a%C%;!<%8$NM%@h$5$l$kB&$G2hA|\e(B
+\e$B$r;H$C$F$$$k$3$H$,$"$k$N$G!"$"$J$?$O$=$l0J30$N%Q!<%H$,$"$k$3$H$K5$$,IU$+\e(B
+\e$B$J$$$+$b$7$l$^$;$s!#\e(B@code{gnus-buttonized-mime-types} \e$B$b;2>H$7$F$/$@$5\e(B
+\e$B$$\e(B (@pxref{MIME Commands, ,MIME \e$B%3%^%s%I\e(B, gnus-ja, The Gnus Manual})\e$B!#\e(B
+@code{gnus-buttonized-mime-types} \e$B$K\e(B @code{"multipart/alternative"} \e$B$rDI\e(B
+\e$B2C$7$?8e$G$O!"8+$?$$B&$r<j$GA*$V$3$H$,$G$-$^$9!#Nc$($P!"$3$N$h$&$K@_Dj$9\e(B
+\e$B$k$l$PNI$$$G$7$g$&\e(B:
+
+@lisp
+(setq gnus-buttonized-mime-types
+ '("multipart/alternative" "multipart/signed")
+ mm-discouraged-alternatives
+ '("text/html" "image/.*"))
+@end lisp
+
+\e$B$3$N>l9g!"\e(BGnus \e$B$O$=$N$h$&$J<oN`$N\e(B spam \e$B%a%C%;!<%8$N$?$a$K!"0J2<$N$h$&$K\e(B
+\e$B%i%8%*%\%?%s$rI=<($9$k$G$7$g$&\e(B:
+
+@example
+1. (*) multipart/alternative ( ) image/gif
+
+2. (*) text/plain ( ) text/html
+@end example
+
@item mm-inline-large-images
@vindex mm-inline-large-images
-When displaying inline images that are larger than the window, Emacs
-does not enable scrolling, which means that you cannot see the whole
-image. To prevent this, the library tries to determine the image size
-before displaying it inline, and if it doesn't fit the window, the
-library will display it externally (e.g. with @samp{ImageMagick} or
-@samp{xv}). Setting this variable to @code{t} disables this check and
-makes the library display all inline images as inline, regardless of
-their size.
+\e$B%&%#%s%I%&$h$jBg$-$J%$%s%i%$%s2hA|$rI=<($9$k$H!"\e(BEmacs \e$B$O%9%/%m!<%k$9$k$3\e(B
+\e$B$H$,$G$-$^$;$s!#$D$^$j2hA|$NA4BN$r8+$k$3$H$,$G$-$J$$$H$$$&$3$H$G$9!#$3$l\e(B
+\e$B$rHr$1$k$?$a$K!"%i%$%V%i%j!<$O$=$l$r%$%s%i%$%sI=<($9$kA0$K2hA|$N%5%$%:$r\e(B
+\e$B7W$C$F!"$=$l$,%&%#%s%I%&$K9g$o$J$$>l9g$O!"%i%$%V%i%j!<$O$=$l$r30It$G\e(B (\e$BNc\e(B
+\e$B$($P\e(B @samp{ImageMagick} \e$B$d\e(B @samp{xv} \e$B$G\e(B) \e$BI=<($7$^$9!#$3$NJQ?t\e(B
+\e$B$r\e(B @code{t} \e$B$K@_Dj$9$k$H!"$3$N8!::$r$5$;$J$/$7$F!"%i%$%V%i%j!<$K$9$Y$F$N\e(B
+\e$B2hA|$r%5%$%:$K4X$o$j$J$/%$%s%i%$%s$GI=<($5$;$^$9!#$b$7$3$NJQ?t\e(B
+\e$B$r\e(B @code{resize} \e$B$K$9$k$H!"\e(BEmacs \e$B$K2hA|$N%5%$%:$rJQ99$9$kG=NO$,$"$l$P!"\e(B
+\e$B2hA|$O%&%#%s%I%&$K9g$&$h$&$K%5%$%:$,JQ99$5$l$FI=<($5$l$^$9!#\e(B
+
+@item mm-inline-large-images-proportion
+@vindex mm-inline-images-max-proportion
+\e$BBg$-$J2hA|$N%5%$%:$rJQ99$9$k$H$-$N3d9g!#\e(B
@item mm-inline-override-types
@vindex mm-inline-override-types
-@code{mm-inlined-types} may include regular expressions, for example to
-specify that all @samp{text/.*} parts be displayed inline. If a user
-prefers to have a type that matches such a regular expression be treated
-as an attachment, that can be accomplished by setting this variable to a
-list containing that type. For example assuming @code{mm-inlined-types}
-includes @samp{text/.*}, then including @samp{text/html} in this
-variable will cause @samp{text/html} parts to be treated as attachments.
+@code{mm-inlined-types} \e$B$O!"Nc$($P$9$Y$F$N\e(B @samp{text/.*} \e$B%Q!<%H$r%$%s%i\e(B
+\e$B%$%s$GI=<($9$k$3$H$r;X<($9$k$h$&$J@55,I=8=$r4^$s$G$$$k$+$b$7$l$^$;$s!#0l\e(B
+\e$BJ}!"%$%s%i%$%sI=<($,2DG=$@$1$l$I$bE:IU%U%!%$%k$H$7$F07$$$?$$%?%$%W$,$"$k\e(B
+\e$B$J$i$P!"$=$N%?%$%W$K9gCW$9$k@55,I=8=$N%j%9%H$r$3$NJQ?t$K@_Dj$9$k$3$H$K$h$C\e(B
+\e$B$F!"$=$l$r<B8=$9$k$3$H$,$G$-$^$9!#Nc$(\e(B
+\e$B$P\e(B @code{mm-inlined-types} \e$B$,\e(B @samp{text/.*} \e$B$r4^$s$G$$$k$b$N$H$9$k$H!"\e(B
+\e$B$3$NJQ?t$K\e(B @samp{text/html} \e$B$r4^$^$;$k$3$H$K$h$C$F!"\e(B@samp{text/html} \e$B%Q!<\e(B
+\e$B%H$OE:IU%U%!%$%k$H$7$F07$o$l$k$h$&$K$J$j$^$9!#\e(B
@item mm-text-html-renderer
@vindex mm-text-html-renderer
-This selects the function used to render @acronym{HTML}. The predefined
-renderers are selected by the symbols @code{w3},
-@code{w3m}@footnote{See @uref{http://emacs-w3m.namazu.org/} for more
-information about emacs-w3m}, @code{links}, @code{lynx},
-@code{w3m-standalone} or @code{html2text}. If @code{nil} use an
-external viewer. You can also specify a function, which will be
-called with a @acronym{MIME} handle as the argument.
+@acronym{HTML} \e$B$rIA2h$9$k$?$a$K;H$&4X?t$rA*Br$7$^$9!#$9$G$KMQ0U$7$F$"$k\e(B
+\e$BIA2h%W%m%0%i%`$O!"\e(B@code{gnus-article-html}, @code{w3},
+@code{w3m}@footnote{emacs-w3m \e$B$K$D$$$F$N>\:Y\e(B
+\e$B$O\e(B @uref{http://emacs-w3m.namazu.org/} \e$B$r8+$F$/$@$5$$!#\e(B}, @code{links},
+@code{lynx}, @code{w3m-standalone} \e$B$^$?$O\e(B @code{html2text} \e$B$N%7%s%\%k72\e(B
+\e$B$N$&$A$N0l$D$r;XDj$9$k$3$H$K$h$C$FA*Br$7$^$9!#$b$7\e(B @code{nil} \e$B$@$C$?$i!"\e(B
+\e$B30It%S%e!<%o!<$r;H$$$^$9!#$5$i$K4X?t\e(B (\e$B0z?t$H$7$F\e(B @acronym{MIME} \e$B%O%s%I%k\e(B
+\e$B$,M?$($i$l$F8F$P$l$k\e(B) \e$B$r@_Dj$9$k$3$H$b$G$-$^$9!#\e(B
@item mm-inline-text-html-with-images
@vindex mm-inline-text-html-with-images
-Some @acronym{HTML} mails might have the trick of spammers using
-@samp{<img>} tags. It is likely to be intended to verify whether you
-have read the mail. You can prevent your personal informations from
-leaking by setting this option to @code{nil} (which is the default).
-It is currently ignored by Emacs/w3. For emacs-w3m, you may use the
-command @kbd{t} on the image anchor to show an image even if it is
-@code{nil}.@footnote{The command @kbd{T} will load all images. If you
-have set the option @code{w3m-key-binding} to @code{info}, use @kbd{i}
-or @kbd{I} instead.}
+@acronym{HTML}
\e$B%a!<%k$K$O
\e(B @samp{<img>}
\e$B%?%0$r;H$C$?
\e(B spammers (spam
\e$B$r$P
\e(B
+\e$B$i$^$/$d$+$i\e(B) \e$B$NH\Nt$J0-9*$_$,4^$^$l$F$$$k$+$b$7$l$^$;$s!#:G$b$"$j$=$&$J\e(B
+\e$B$N$O!"$"$J$?$,$=$N%a!<%k$rFI$s$@$3$H$r3NG'$9$k$?$a$N0U?^$,$"$k$3$H$G$9!#\e(B
+\e$B$3$N%*%W%7%g%s$r\e(B @code{nil} \e$B$K@_Dj$9$k\e(B (\e$B$=$l$,%G%#%U%)%k%H$G$9\e(B) \e$B$3$H$K$h$C\e(B
+\e$B$F!"$"$J$?$N8D?M>pJs$,N.=P$9$k$N$rKI$0$3$H$,$G$-$^$9!#:#$N$H$3\e(B
+\e$B$m\e(B Emacs/W3 \e$B$O$3$l$rL5;k$7$^$9!#\e(BEmacs-w3m \e$B$G$O!"$3$l$,\e(B @code{nil} \e$B$G$"$C\e(B
+\e$B$F$b!"2hA|$,Kd$a9~$^$l$?>l=j$G\e(B @kbd{t} \e$BL?Na$r;H$&$3$H$K$h$C$F2hA|$rI=<(\e(B
+\e$B$9$k$3$H$,$G$-$^$9!#\e(B@footnote{@kbd{T} \e$BL?Na$O$9$Y$F$N2hA|$r<h$j9~$_$^$9!#\e(B
+@code{w3m-key-binding} \e$B%*%W%7%g%s$r\e(B @code{info} \e$B$K@_Dj$7$?>l9g$O!"Be$o$j\e(B
+\e$B$K\e(B @kbd{i} \e$B$+\e(B @kbd{I} \e$B$r;H$C$F$/$@$5$$!#\e(B}
@item mm-w3m-safe-url-regexp
@vindex mm-w3m-safe-url-regexp
-A regular expression that matches safe URL names, i.e. URLs that are
-unlikely to leak personal information when rendering @acronym{HTML}
-email (the default value is @samp{\\`cid:}). If @code{nil} consider
-all URLs safe.
+\e$B0BA4$J\e(B URL \e$BL>!"$9$J$o$A\e(B @acronym{HTML} \e$B%a!<%k$rIA2h$9$k$H$-$K8D?M>pJs$,\e(B
+\e$BN.=P$7$=$&$b$J$$\e(B URL \e$B$K9gCW$9$k@55,I=8=$G$9\e(B (\e$B%G%#%U%)%k%HCM\e(B
+\e$B$O\e(B @samp{\\`cid:} \e$B$G$9\e(B)\e$B!#\e(B@code{nil} \e$B$K$9$k$H!"$9$Y$F$N\e(B URL \e$B$,0BA4$@$HH=\e(B
+\e$BCG$7$^$9!#\e(BGnus \e$B$G$O!"$3$l$O\e(B @code{gnus-safe-html-newsgroups} \e$B$NCM$K1~$8\e(B
+\e$B$F>e=q$-$5$l$^$9!#\e(B@xref{Various Various, ,\e$B$$$m$$$m$N$$$m$$$m\e(B, gnus-ja,
+The Gnus Manual}.
@item mm-inline-text-html-with-w3m-keymap
@vindex mm-inline-text-html-with-w3m-keymap
-You can use emacs-w3m command keys in the inlined text/html part by
-setting this option to non-@code{nil}. The default value is @code{t}.
+\e$B$3$N%*%W%7%g%s$rHs\e(B-@code{nil} \e$B$K@_Dj$9$k$3$H$K$h$C$F!"%$%s%i%$%sI=<($5$l\e(B
+\e$B$?\e(B text/html \e$B%Q!<%H$G\e(B emacs-w3m \e$B$NL?Na%-!<$r;H$&$3$H$,$G$-$^$9!#%G%#%U%)\e(B
+\e$B%k%HCM$O\e(B @code{t} \e$B$G$9!#\e(B
@item mm-external-terminal-program
@vindex mm-external-terminal-program
-The program used to start an external terminal.
+\e$B30It$NC<Kv$r5/F0$9$k$?$a$K;H$o$l$k%W%m%0%i%`$G$9!#\e(B
@item mm-enable-external
@vindex mm-enable-external
-Indicate whether external @acronym{MIME} handlers should be used.
-
-If @code{t}, all defined external @acronym{MIME} handlers are used. If
-@code{nil}, files are saved to disk (@code{mailcap-save-binary-file}).
-If it is the symbol @code{ask}, you are prompted before the external
-@acronym{MIME} handler is invoked.
-
-When you launch an attachment through mailcap (@pxref{mailcap}) an
-attempt is made to use a safe viewer with the safest options---this isn't
-the case if you save it to disk and launch it in a different way
-(command line or double-clicking). Anyhow, if you want to be sure not
-to launch any external programs, set this variable to @code{nil} or
-@code{ask}.
-
+\e$B30It$N\e(B @acronym{MIME} \e$B%O%s%I%i!<$r;H$&$Y$-$+$I$&$+$r;XDj$7$^$9!#\e(B
+
+@code{t} \e$B$@$C$?$i!"Dj5A$5$l$F$$$k$9$Y$F$N30It$N\e(B @acronym{MIME} \e$B%O%s%I%i!<\e(B
+\e$B$,;H$o$l$^$9!#\e(B@code{nil} \e$B$K$9$k$H!"%U%!%$%k$O%G%#%9%/$KJ]B8$5$l$^\e(B
+\e$B$9\e(B (@code{mailcap-save-binary-file})\e$B!#$3$l$,\e(B @code{ask} \e$B$H$$$&%7%s%\%k$@$C\e(B
+\e$B$?$i!"30It$N\e(B @acronym{MIME} \e$B%O%s%I%i!<$,5/F0$5$l$kA0$K?R$M$i$l$k$G$7$g$&!#\e(B
+
+Mailcap (@pxref{mailcap}) \e$B$r2p$7$FE:IU%U%!%$%k$NI=<($r;O$a$k$H!"0BA4$J\e(B
+\e$B%S%e!<%o!<$r:G$b0BA4$J%*%W%7%g%s$G;H$&$3$H$r;n$_$^$9\e(B (\e$BE:IU%U%!%$%k$r%G%#\e(B
+\e$B%9%/$KJ]B8$7$F!"0[$J$k<jCJ\e(B (\e$B%3%^%s%I%i%$%s$+%@%V%k%/%j%C%/\e(B) \e$B$G$=$NI=<($r\e(B
+\e$B;O$a$k>l9g$H$O0c$$$^$9\e(B)\e$B!#$H$K$+$/!"I,$:$I$s$J30It%W%m%0%i%`$b;H$o$J$$$h\e(B
+\e$B$&$K$7$?$$$N$G$"$l$P!"$3$NJQ?t$r\e(B @code{nil} \e$B$+\e(B @code{ask} \e$B$K@_Dj$7$F$/$@\e(B
+\e$B$5$$!#\e(B
@end table
@node Files and Directories
-@section Files and Directories
+@section \e$B%U%!%$%k$H%G%#%l%/%H%j!<\e(B
@table @code
-
@item mm-default-directory
@vindex mm-default-directory
-The default directory for saving attachments. If @code{nil} use
-@code{default-directory}.
+\e$BE:IU%U%!%$%k$rJ]B8$9$k$?$a$N!"%G%#%U%)%k%H$N%G%#%l%/%H%j!<$G$9!#\e(B
+@code{nil} \e$B$@$C$?$i\e(B @code{default-directory} \e$B$r;H$$$^$9!#\e(B
@item mm-tmp-directory
@vindex mm-tmp-directory
-Directory for storing temporary files.
+\e$B0l;~%U%!%$%k$r3JG<$9$k$?$a$N%G%#%l%/%H%j!<$G$9!#\e(B
@item mm-file-name-rewrite-functions
@vindex mm-file-name-rewrite-functions
-A list of functions used for rewriting file names of @acronym{MIME}
-parts. Each function is applied successively to the file name.
-Ready-made functions include
+@acronym{MIME} \e$B%Q!<%H$N%U%!%$%kL>$r=q$-49$($k$?$a$K;H$o$l$k4X?t$N%j%9%H\e(B
+\e$B$G$9!#$=$l$>$l$N4X?t$O%U%!%$%kL>$KBP$7$F=g7+$j$K<B9T$5$l$^$9\e(B (\e$BLuCm\e(B: \e$B$"$k\e(B
+\e$B4X?t$NLa$jCM$,<!$N4X?t$N0z?t$K$J$j$^$9\e(B)\e$B!#=PMh9g$$$N4X?t$O0J2<$NDL$j$G$9!#\e(B
@table @code
@item mm-file-name-delete-control
@findex mm-file-name-delete-control
-Delete all control characters.
+\e$B$9$Y$F$N@)8fJ8;z$r>C5n$7$^$9!#\e(B
@item mm-file-name-delete-gotchas
@findex mm-file-name-delete-gotchas
-Delete characters that could have unintended consequences when used
-with flawed shell scripts, i.e. @samp{|}, @samp{>} and @samp{<}; and
-@samp{-}, @samp{.} as the first character.
+\e$B7g4Y$,$"$k%7%'%k%9%/%j%W%H$G;H$o$l$k$H0U?^$7$J$$7k2L$r@8$8$kJ8;z!"$9$J$o\e(B
+\e$B$A\e(B @samp{|}, @samp{>} \e$B$*$h$S\e(B @samp{<}\e$B!"2C$($F:G=i$NJ8;z$H$7$F;H$o$l\e(B
+\e$B$k\e(B @samp{-} \e$B$H\e(B @samp{.} \e$B$r>C5n$7$^$9!#\e(B
@item mm-file-name-delete-whitespace
@findex mm-file-name-delete-whitespace
-Remove all whitespace.
+\e$B$9$Y$F$N6uGrJ8;z$r<h$j=|$-$^$9!#\e(B
@item mm-file-name-trim-whitespace
@findex mm-file-name-trim-whitespace
-Remove leading and trailing whitespace.
+\e$B@hF,$HKvHx$N6uGrJ8;z$r<h$j=|$-$^$9!#\e(B
@item mm-file-name-collapse-whitespace
@findex mm-file-name-collapse-whitespace
-Collapse multiple whitespace characters.
+\e$BJ#?t$NO"B3$7$?6uGrJ8;z$rC10l$N%9%Z!<%9J8;z$GCV$-49$($^$9!#\e(B
@item mm-file-name-replace-whitespace
@findex mm-file-name-replace-whitespace
@vindex mm-file-name-replace-whitespace
-Replace whitespace with underscores. Set the variable
-@code{mm-file-name-replace-whitespace} to any other string if you do
-not like underscores.
+\e$B6uGrJ8;z$r2<@~\e(B (underscore) \e$B$GCV$-49$($^$9!#2<@~$,$*9%$_$G$J$1$l$P!"B>$N\e(B
+\e$BJ8;z$r\e(B @code{mm-file-name-replace-whitespace} \e$BJQ?t$K@_Dj$7$F$/$@$5$$!#\e(B
@end table
-The standard Emacs functions @code{capitalize}, @code{downcase},
-@code{upcase} and @code{upcase-initials} might also prove useful.
+Emacs \e$BI8=`$N4X?t$G$"$k\e(B @code{capitalize}, @code{downcase},
+@code{upcase} \e$B$*$h$S\e(B @code{upcase-initials} \e$B$bLr$KN)$D$3$H$,$"$k$+$b$7$l\e(B
+\e$B$^$;$s!#\e(B
@item mm-path-name-rewrite-functions
@vindex mm-path-name-rewrite-functions
-List of functions used for rewriting the full file names of @acronym{MIME}
-parts. This is used when viewing parts externally, and is meant for
-transforming the absolute name so that non-compliant programs can find
-the file where it's saved.
-
+@acronym{MIME} \e$B%Q!<%H$N%U%k!&%U%!%$%kL>$r=q$-49$($k$?$a$K;H$o$l$k4X?t$N\e(B
+\e$B%j%9%H$G$9!#$3$l$O%Q!<%H$r30It$GI=<($9$k$H$-\e(B (\e$B$9$J$o$A!"M;DL$N8z$+$J$$%W\e(B
+\e$B%m%0%i%`$,!"%U%!%$%k$,J]B8$5$l$?>l=j$r8+$D$1$k$3$H$,$G$-$k$h$&$K!"@dBP%Q\e(B
+\e$B%9L>$rJQ49$9$k$?$a\e(B) \e$B$K;H$o$l$^$9!#\e(B
@end table
@node New Viewers
-@section New Viewers
+@section \e$B?7$7$$%S%e!<%o!<\e(B
-Here's an example viewer for displaying @code{text/enriched} inline:
+\e$B$3$l$O\e(B @code{text/enriched} \e$B%Q!<%H$r%$%s%i%$%sI=<($9$k%S%e!<%o!<$NNc$G$9\e(B:
@lisp
(defun mm-display-enriched-inline (handle)
(mm-insert-inline handle text)))
@end lisp
-We see that the function takes a @acronym{MIME} handle as its parameter. It
-then goes to a temporary buffer, inserts the text of the part, does some
-work on the text, stores the result, goes back to the buffer it was
-called from and inserts the result.
-
-The two important helper functions here are @code{mm-insert-part} and
-@code{mm-insert-inline}. The first function inserts the text of the
-handle in the current buffer. It handles charset and/or content
-transfer decoding. The second function just inserts whatever text you
-tell it to insert, but it also sets things up so that the text can be
-``undisplayed'' in a convenient manner.
+\e$B$3$N4X?t$,%Q%i%a!<%?!<$H$7$F\e(B @acronym{MIME} \e$B%O%s%I%k$r<u$1<h$k$3$H$,$o$+\e(B
+\e$B$j$^$9$M!#$=$l$O0l;~%P%C%U%!!<$K:n6H>l=j$r0\$7!"%Q!<%H$N%F%-%9%H$rA^F~$7!"\e(B
+\e$B$=$N%F%-%9%H$K2?$+$N=hM}$r;\$7!"7k2L$r3P$($F$*$$$F!"4X?t$,8F$P$l$?$H$-$N\e(B
+\e$B%P%C%U%!!<$KLa$C$F$=$N7k2L$rA^F~$7$^$9!#\e(B
+\e$B$3$3$K$"$kFs$D$N=EMW$J$*=u$14X?t\e(B
+\e$B$O\e(B @code{mm-insert-part} \e$B$H\e(B @code{mm-insert-inline} \e$B$G$9!#:G=i$N4X?t$O!"\e(B
+\e$B%O%s%I%k$N%F%-%9%H$r8=:_$N%P%C%U%!!<$KA^F~$7$^$9!#$3$l$OJ8;z%;%C%H$*$h$S\e(B
+\e$B%(%s%3!<%G%#%0\e(B (content transfer decoding) \e$B$r<h$j07$$$^$9!#FsHVL\$N4X?t\e(B
+\e$B$O!"A^F~$7$m$H8@$C$?$I$s$J%F%-%9%H$G$bC1$KA^F~$7$^$9$,!"%F%-%9%H$r<j7Z$J\e(B
+\e$BJ}K!$G!VI=<($5$l$J$/$9$k!W\e(B(undisplayed \e$B$K$9$k\e(B) \e$B$3$H$,$G$-$k$h$&$J=t@_Dj\e(B
+\e$B$r$b9T$J$$$^$9!#\e(B
@node Composing
-@chapter Composing
+@chapter MIME \e$B%a%C%;!<%8$N:n@.\e(B
@cindex Composing
@cindex MIME Composing
@cindex MML
@cindex MIME Meta Language
-Creating a @acronym{MIME} message is boring and non-trivial. Therefore,
-a library called @code{mml} has been defined that parses a language
-called @acronym{MML} (@acronym{MIME} Meta Language) and generates
-@acronym{MIME} messages.
+@acronym{MIME} \e$B%a%C%;!<%8$N:n@.$O$&$s$6$j$9$k;E;v$@$74JC1$G$b$"$j$^$;$s!#\e(B
+\e$B$=$3$G!"\e(B@acronym{MML} (@acronym{MIME} Meta Language) \e$B$H$$$&8@8l$r2r@O$7\e(B
+\e$B$F!"\e(B@acronym{MIME} \e$B%a%C%;!<%8$r@8@.$9$k$?$a$N!"\e(B@code{mml} \e$B$H$$$&%i%$%V%i\e(B
+\e$B%j!<$,:n$i$l$^$7$?!#\e(B
@findex mml-generate-mime
-The main interface function is @code{mml-generate-mime}. It will
-examine the contents of the current (narrowed-to) buffer and return a
-string containing the @acronym{MIME} message.
+\e$B<gMW$J%$%s%?!<%U%'!<%94X?t$O\e(B @code{mml-generate-mime} \e$B$G$9!#$3$l$O8=:_\e(B
+\e$B$N\e(B (\e$B69$a$i$l$?\e(B) \e$B%P%C%U%!!<$NFbMFJ*$rD4$Y$F!"\e(B@acronym{MIME} \e$B%a%C%;!<%8$r\e(B
+\e$B4^$`J8;zNs$rJV$7$^$9!#\e(B
@menu
-* Simple MML Example:: An example @acronym{MML} document.
-* MML Definition:: All valid @acronym{MML} elements.
-* Advanced MML Example:: Another example @acronym{MML} document.
-* Encoding Customization:: Variables that affect encoding.
-* Charset Translation:: How charsets are mapped from @sc{mule} to @acronym{MIME}.
-* Conversion:: Going from @acronym{MIME} to @acronym{MML} and vice versa.
-* Flowed text:: Soft and hard newlines.
+* Simple MML Example:: @acronym{MML} \e$BJ8=q$NNc\e(B
+* MML Definition:: \e$B$9$Y$F$NM-8z$J\e(B @acronym{MML} \e$BMWAG\e(B
+* Advanced MML Example:: \e$B$b$&0l$D$N\e(B @acronym{MML} \e$BJ8=q$NNc\e(B
+* Encoding Customization:: \e$B%(%s%3!<%G%#%s%0$K:nMQ$9$kJQ?t\e(B
+* Charset Translation:: @sc{mule} \e$BJ8;z%;%C%H$+$i\e(B @acronym{MIME} \e$BJ8;z%;%C%H$X$N3d$jEv$F\e(B
+* Conversion:: @acronym{MIME} \e$B$+$i\e(B @acronym{MML} \e$B$X!"$*$h$S$=$N5U\e(B
+* Flowed text:: \e$B%=%U%H$*$h$S%O!<%I2~9T\e(B
@end menu
-
@node Simple MML Example
-@section Simple MML Example
+@section \e$BC1=c$J\e(B MML \e$B$NNc\e(B
-Here's a simple @samp{multipart/alternative}:
+@samp{multipart/alternative} \e$B$NC1=c$JNc$G$9\e(B:
@example
<#multipart type=alternative>
This is a plain text part.
+\e$B$3$l$O%W%l!<%s%F%-%9%H$N%Q!<%H$G$9!#\e(B
<#part type=text/enriched>
<center>This is a centered enriched part</center>
+<center>\e$B$3$l$OCf?4$KCV$+$l$k\e(B enriched \e$B%Q!<%H$G$9\e(B</center>
<#/multipart>
@end example
-After running this through @code{mml-generate-mime}, we get this:
+\e$B$3$l$r\e(B @code{mml-generate-mime} \e$B$KDL$9$H!"<!$N$b$N$,F@$i$l$^$9\e(B:
@example
Content-Type: multipart/alternative; boundary="=-=-="
-
--=-=-=
-
+Content-Type: text/plain; charset=iso-2022-jp
This is a plain text part.
+\e$B$3$l$O%W%l!<%s%F%-%9%H$N%Q!<%H$G$9!#\e(B
--=-=-=
-Content-Type: text/enriched
-
+Content-Type: text/enriched; charset=iso-2022-jp
<center>This is a centered enriched part</center>
+<center>\e$B$3$l$OCf?4$KCV$+$l$k\e(B enriched \e$B%Q!<%H$G$9\e(B</center>
--=-=-=--
@end example
+(\e$B<B:]$K$O!"F|K\8l$NItJ,$O\e(B @samp{charset=iso-2022-jp} \e$B$G%(%s%3!<%I$5$l$?\e(B
+\e$B$b$N$K$J$j$^$9!#\e(B)
@node MML Definition
-@section MML Definition
+@section MML \e$B$NDj5A\e(B
-The @acronym{MML} language is very simple. It looks a bit like an SGML
-application, but it's not.
+@acronym{MML} \e$B8@8l$O$H$F$bC1=c$G$9!#\e(BSGML \e$B%"%W%j%1!<%7%g%s$K>/$7;w$F$$$^\e(B
+\e$B$9$,!"0[$J$k$b$N$G$9!#\e(B
-The main concept of @acronym{MML} is the @dfn{part}. Each part can be of a
-different type or use a different charset. The way to delineate a part
-is with a @samp{<#part ...>} tag. Multipart parts can be introduced
-with the @samp{<#multipart ...>} tag. Parts are ended by the
-@samp{<#/part>} or @samp{<#/multipart>} tags. Parts started with the
-@samp{<#part ...>} tags are also closed by the next open tag.
+@acronym{MML} \e$B$N<gMW$J35G0$O!V%Q!<%H!W$G$9!#$=$l$>$l$N%Q!<%H$r0[$J$k%?%$\e(B
+\e$B%W$K$7$?$j!"0[$J$kJ8;z%;%C%H$r;H$&$3$H$,$G$-$^$9!#%Q!<%H\e(B
+\e$B$O\e(B @samp{<#part ...>} \e$B%?%0$G5-=R$7$^$9!#%^%k%A%Q!<%H7?$N%Q!<%H\e(B
+\e$B$O\e(B @samp{<#multipart ...>} \e$B%?%0$G;O$a$^$9!#$=$l$>$l$N%Q!<%H\e(B
+\e$B$O\e(B @samp{<#/part>} \e$B%?%0$+\e(B @samp{<#/multipart>} \e$B%?%0$G=*C<$7$^$9$,!"\e(B(\e$B$=$l\e(B
+\e$B$i$,L5$/$F$b\e(B) @samp{<#part ...>} \e$B$G;O$^$C$?%?%0$O<!$N%Q!<%H$N;O$^$j$K$h$C\e(B
+\e$B$F$bJD$8$i$l$^$9!#\e(B
-There's also the @samp{<#external ...>} tag. These introduce
-@samp{external/message-body} parts.
+@samp{<#external ...>} \e$B%?%0$H$$$&$b$N$b$"$j$^$9!#$3$l\e(B
+\e$B$O\e(B @samp{external/message-body} \e$B7?$N%Q!<%H$r5-=R$9$k$?$a$K;H$o$l$^$9!#\e(B
-Each tag can contain zero or more parameters on the form
-@samp{parameter=value}. The values may be enclosed in quotation marks,
-but that's not necessary unless the value contains white space. So
-@samp{filename=/home/user/#hello$^yes} is perfectly valid.
+\e$B$=$l$>$l$N%?%0$O!V\e(Bparameter=\e$BCM!W$N7A<0$G!"0l$D0J>e$N%Q%i%a!<%?!<$r4^$`$3\e(B
+\e$B$H$,$G$-$^$9\e(B (\e$B$b$A$m$sL5$$$3$H$b$"$j$^$9\e(B)\e$B!#CM$r%/%)!<%F!<%7%g%s%^!<\e(B
+\e$B%/\e(B ("...") \e$B$G0O$`$3$H$,$G$-$^$9$,!"CM$,6uGrJ8;z$r4^$`>l9g0J30$O0O$`I,MW\e(B
+\e$B$,$"$j$^$;$s!#$7$?$,$C$F!"\e(B@samp{filename=/home/user/#hello$^yes} \e$B$O40A4\e(B
+\e$B$KM-8z$G$9!#\e(B
-The following parameters have meaning in @acronym{MML}; parameters that have no
-meaning are ignored. The @acronym{MML} parameter names are the same as the
-@acronym{MIME} parameter names; the things in the parentheses say which
-header it will be used in.
+\e$B0J2<$N%Q%i%a!<%?!<$O\e(B @acronym{MML} \e$B$G;H$o$l$k$b$N$G$9!#0UL#$r;}$?$J$$%Q\e(B
+\e$B%i%a!<%?!<$OL5;k$5$l$^$9!#\e(B@acronym{MML} \e$B%Q%i%a!<%?!<$NL>A0\e(B
+\e$B$O\e(B @acronym{MIME} \e$B%Q%i%a!<%?!<$NL>A0$HF1$8$G!"3g8L$NCf$KIU5-$7$F$"$k$N$O!"\e(B
+\e$B$=$l$,;H$o$l$k%X%C%@!<$G$9!#\e(B
@table @samp
@item type
-The @acronym{MIME} type of the part (@code{Content-Type}).
+\e$B%Q!<%H$N\e(B @acronym{MIME} \e$B%?%$%W$G$9\e(B (@code{Content-Type})\e$B!#\e(B
@item filename
-Use the contents of the file in the body of the part
-(@code{Content-Disposition}).
+\e$B$=$N%Q!<%H$NK\BN$,4^$`$3$H$K$J$k%U%!%$%k$NL>A0$G\e(B
+\e$B$9\e(B (@code{Content-Disposition})\e$B!#\e(B
@item charset
-The contents of the body of the part are to be encoded in the character
-set specified (@code{Content-Type}). @xref{Charset Translation}.
+\e$B%Q!<%H$NFbMFJ*$r%(%s%3!<%I$9$k$H$-$K;H$o$l$kJ8;z%;%C%H$G\e(B
+\e$B$9\e(B (@code{Content-Type})\e$B!#\e(B@xref{Charset Translation}.
@item name
-Might be used to suggest a file name if the part is to be saved
-to a file (@code{Content-Type}).
+\e$B%Q!<%H$r%U%!%$%k$KJ]B8$9$k$H$-$N%U%!%$%kL>$r<(:6$9$k$?$a$K;H$o$l$k$+$b$7\e(B
+\e$B$l$^$;$s\e(B (@code{Content-Type})\e$B!#\e(B
@item disposition
-Valid values are @samp{inline} and @samp{attachment}
-(@code{Content-Disposition}).
+\e$BG[CV;XDj$K;H$$$^$9!#M-8z$JCM$O\e(B @samp{inline} \e$B$H\e(B @samp{attachment} \e$B$G\e(B
+\e$B$9\e(B (@code{Content-Disposition})\e$B!#\e(B
@item encoding
-Valid values are @samp{7bit}, @samp{8bit}, @samp{quoted-printable} and
-@samp{base64} (@code{Content-Transfer-Encoding}). @xref{Charset
+\e$BM-8z$JCM$O\e(B @samp{7bit}, @samp{8bit}, @samp{quoted-printable} \e$B$*$h\e(B
+\e$B$S\e(B @samp{base64} \e$B$G$9\e(B (@code{Content-Transfer-Encoding})\e$B!#\e(B@xref{Charset
Translation}.
@item description
-A description of the part (@code{Content-Description}).
+\e$B%Q!<%H$N@bL@=q$-$G$9\e(B (@code{Content-Description})\e$B!#\e(B
@item creation-date
-RFC822 date when the part was created (@code{Content-Disposition}).
+\e$B%Q!<%H$,:n@.$5$l$?;~9o\e(B (RFC822 \e$B7A<0\e(B) \e$B$G$9\e(B (@code{Content-Disposition})\e$B!#\e(B
@item modification-date
-RFC822 date when the part was modified (@code{Content-Disposition}).
+\e$B%Q!<%H$,JQ99$5$l$?;~9o\e(B (RFC822 \e$B7A<0\e(B) \e$B$G$9\e(B (@code{Content-Disposition})\e$B!#\e(B
@item read-date
-RFC822 date when the part was read (@code{Content-Disposition}).
+\e$B%Q!<%H$,FI$^$l$?;~9o\e(B (RFC822 \e$B7A<0\e(B) \e$B$G$9\e(B (@code{Content-Disposition})\e$B!#\e(B
@item recipients
-Who to encrypt/sign the part to. This field is used to override any
-auto-detection based on the To/CC headers.
+\e$B%Q!<%H$rC/08$F$K0E9f2=\e(B/\e$B=pL>$9$k$+$r;XDj$7$^$9!#$3$l$O\e(B To/CC \e$B$r4p$K$7$?<+\e(B
+\e$BF08!=P$h$j$bM%@h$5$l$^$9!#\e(B
@item sender
-Identity used to sign the part. This field is used to override the
-default key used.
+\e$B%Q!<%H$K=pL>$9$k$H$-$NL>5A$G$9!#$3$N%U%#!<%k%I$O%G%#%U%)%k%H$N80$,;H$o$l\e(B
+\e$B$J$$$h$&$K$9$k$?$a$K;H$o$l$^$9!#\e(B
@item size
-The size (in octets) of the part (@code{Content-Disposition}).
+\e$B%Q!<%H$N%5%$%:$r\e(B octet (8-bit) \e$B$NC10L$GI=$7$^\e(B
+\e$B$9\e(B (@code{Content-Disposition})\e$B!#\e(B
@item sign
-What technology to sign this @acronym{MML} part with (@code{smime}, @code{pgp}
-or @code{pgpmime})
+\e$B$3$N\e(B @acronym{MML} \e$B$N%Q!<%H$K!"2?$N5;=Q<jCJ\e(B (@code{smime}, @code{pgp} \e$B$^\e(B
+\e$B$?$O\e(B @code{pgpmime}) \e$B$G=pL>$9$k$+$r;XDj$7$^$9!#\e(B
@item encrypt
-What technology to encrypt this @acronym{MML} part with (@code{smime},
-@code{pgp} or @code{pgpmime})
-
+\e$B$3$N\e(B @acronym{MML} \e$B$N%Q!<%H$r!"2?$N5;=Q<jCJ\e(B (@code{smime}, @code{pgp} \e$B$^\e(B
+\e$B$?$O\e(B @code{pgpmime}) \e$B$G0E9f2=$9$k$+$r;XDj$7$^$9!#\e(B
@end table
-Parameters for @samp{text/plain}:
+\e$B0J2<$O\e(B @samp{text/plain} \e$B$N$?$a$N%Q%i%a!<%?!<$G$9\e(B:
@table @samp
@item format
-Formatting parameter for the text, valid values include @samp{fixed}
-(the default) and @samp{flowed}. Normally you do not specify this
-manually, since it requires the textual body to be formatted in a
-special way described in RFC 2646. @xref{Flowed text}.
+\e$B%F%-%9%H$r@07A$9$k$?$a$N%Q%i%a!<%?!<$G!"M-8z$JCM$O\e(B @samp{fixed} (\e$B%G%#%U%)\e(B
+\e$B%k%H\e(B) \e$B$H\e(B @samp{flowed} \e$B$G$9!#IaDL$O$3$l$r<j$G@_Dj$7$^$;$s!#$=$l$O!"%F%-\e(B
+\e$B%9%H$NK\J8$,!"\e(BRFC 2646 \e$B$GDj$a$i$l$?FCJL$JJ}K!$G@07A$5$l$k$3$H$rI,MW$H$9\e(B
+\e$B$k$+$i$G$9!#\e(B@xref{Flowed text}.
@end table
-Parameters for @samp{application/octet-stream}:
+\e$B0J2<$O\e(B @samp{application/octet-stream} \e$B$N$?$a$N%Q%i%a!<%?!<$G$9\e(B:
@table @samp
@item type
-Type of the part; informal---meant for human readers
-(@code{Content-Type}).
+\e$B%Q!<%H$N%?%$%W$G$9\e(B (@code{Content-Type})\e$B!#$3$l$O?M4V$,FI$`$3$H$rA[Dj$7$?!"\e(B
+\e$BHs8x<0$J$b$N$G$9!#\e(B
@end table
-Parameters for @samp{message/external-body}:
+\e$B0J2<$O\e(B @samp{message/external-body} \e$B$N$?$a$N%Q%i%a!<%?!<$G$9\e(B:
@table @samp
@item access-type
-A word indicating the supported access mechanism by which the file may
-be obtained. Values include @samp{ftp}, @samp{anon-ftp}, @samp{tftp},
-@samp{localfile}, and @samp{mailserver}. (@code{Content-Type}.)
+\e$B%U%!%$%k$r<hF@$9$k$?$a$N!"%5%]!<%H$5$l$F$$$k%"%/%;%9<jCJ$r<($98l$G$9!#CM\e(B
+\e$B$O\e(B @samp{ftp}, @samp{anon-ftp}, @samp{tftp}, @samp{localfile} \e$B$*$h\e(B
+\e$B$S\e(B @samp{mailserver} \e$B$N$I$l$+$G$9!#\e(B(@code{Content-Type}.)
@item expiration
-The RFC822 date after which the file may no longer be fetched.
+\e$B%U%!%$%k$,<hF@$G$-$J$/$J$k$+$b$7$l$J$$F|;~\e(B (RFC822 \e$B7A<0\e(B) \e$B$G$9!#\e(B
(@code{Content-Type}.)
@item size
-The size (in octets) of the file. (@code{Content-Type}.)
+Octet (8-bit) \e$B$NC10L$GI=$7$?%U%!%$%k$N%5%$%:$G$9!#\e(B(@code{Content-Type}.)
@item permission
-Valid values are @samp{read} and @samp{read-write}
-(@code{Content-Type}).
-
+\e$BM-8z$JCM$O\e(B @samp{read} \e$B$H\e(B @samp{read-write} \e$B$G$9\e(B (@code{Content-Type})\e$B!#\e(B
@end table
-Parameters for @samp{sign=smime}:
+\e$B0J2<$O\e(B @samp{sign=smime} \e$B$N$?$a$N%Q%i%a!<%?!<$G$9\e(B:
@table @samp
-
@item keyfile
-File containing key and certificate for signer.
-
+\e$B=pL>$9$k?M$N80$H>ZL@=q$r4^$s$G$$$k%U%!%$%k$G$9!#\e(B
@end table
-Parameters for @samp{encrypt=smime}:
+\e$B0J2<$O\e(B @samp{encrypt=smime} \e$B$N$?$a$N%Q%i%a!<%?!<$G$9\e(B:
@table @samp
-
@item certfile
-File containing certificate for recipient.
-
+\e$B<u<h?M$N>ZL@=q$r4^$s$G$$$k%U%!%$%k$G$9!#\e(B
@end table
-
@node Advanced MML Example
-@section Advanced MML Example
+@section \e$B9bEY$J\e(B MML \e$B$NNc\e(B
-Here's a complex multipart message. It's a @samp{multipart/mixed} that
-contains many parts, one of which is a @samp{multipart/alternative}.
+\e$BJ#;($J%^%k%A%Q!<%H!&%a%C%;!<%8$NNc$G$9!#$3$l$O\e(B @samp{multipart/mixed} \e$B$G\e(B
+\e$B$9!#B??t$N%Q!<%H$r4^$s$G$$$F!"$=$N0l$D$O\e(B @samp{multipart/alternative} \e$B$G\e(B
+\e$B$9!#\e(B
@example
<#multipart type=mixed>
<#part type=image/jpeg filename=~/rms.jpg disposition=inline>
<#multipart type=alternative>
This is a plain text part.
+\e$B$3$l$O%W%l!<%s%F%-%9%H$N%Q!<%H$G$9!#\e(B
<#part type=text/enriched name=enriched.txt>
<center>This is a centered enriched part</center>
+<center>\e$B$3$l$OCf?4$KCV$+$l$k\e(B enriched \e$B%Q!<%H$G$9\e(B</center>
<#/multipart>
This is a new plain text part.
+\e$B$3$l$O?7$7$$%W%l!<%s%F%-%9%H$N%Q!<%H$G$9!#\e(B
<#part disposition=attachment>
This plain text part is an attachment.
+\e$B$3$N%W%l!<%s%F%-%9%H$N%Q!<%H$OE:IU%U%!%$%k$G$9!#\e(B
<#/multipart>
@end example
-And this is the resulting @acronym{MIME} message:
+\e$B$=$7$F!"$3$l$,7k2L$N\e(B @acronym{MIME} \e$B%a%C%;!<%8$G$9\e(B:
@example
Content-Type: multipart/mixed; boundary="=-=-="
-
--=-=-=
-
-
-
---=-=-=
-Content-Type: image/jpeg;
- filename="~/rms.jpg"
-Content-Disposition: inline;
- filename="~/rms.jpg"
+Content-Type: image/jpeg
+Content-Disposition: inline; filename=rms.jpg
Content-Transfer-Encoding: base64
/9j/4AAQSkZJRgABAQAAAQABAAD/2wBDAAgGBgcGBQgHBwcJCQgKDBQNDAsLDBkSEw8UHRof
7p5Ga9Atte0LTLKO6it4i7dVRFJDcZ4PvXN+JvEMF9bILVGXJLSZ4zkjivRPDaeX4b08HOTC
pOffmua+KkbS+GLVUGT9tT/0B68eeIpIFYjB70+OOVXyoOM9+M1eaWeCLzHPyHGO/NVWvJJm
jQ8KGH1NfQWhXSXmh2c8eArRLwO3HSv/2Q==
-
--=-=-=
Content-Type: multipart/alternative; boundary="==-=-="
-
--==-=-=
-
+Content-Type: text/plain; charset=iso-2022-jp
This is a plain text part.
+\e$B$3$l$O%W%l!<%s%F%-%9%H$N%Q!<%H$G$9!#\e(B
--==-=-=
-Content-Type: text/enriched;
- name="enriched.txt"
-
+Content-Type: text/enriched; charset=iso-2022-jp; name=enriched.txt
<center>This is a centered enriched part</center>
+<center>\e$B$3$l$OCf?4$KCV$+$l$k\e(B enriched \e$B%Q!<%H$G$9\e(B</center>
--==-=-=--
--=-=-=
+Content-Type: text/plain; charset=iso-2022-jp
This is a new plain text part.
+\e$B$3$l$O?7$7$$%W%l!<%s%F%-%9%H$N%Q!<%H$G$9!#\e(B
--=-=-=
+Content-Type: text/plain; charset=iso-2022-jp
Content-Disposition: attachment
-
This plain text part is an attachment.
+\e$B$3$N%W%l!<%s%F%-%9%H$N%Q!<%H$OE:IU%U%!%$%k$G$9!#\e(B
--=-=-=--
@end example
+(\e$B<B:]$K$O!"F|K\8l$NItJ,$O\e(B @samp{charset=iso-2022-jp} \e$B$G%(%s%3!<%I$5$l$?\e(B
+\e$B$b$N$K$J$j$^$9!#\e(B)
+
@node Encoding Customization
-@section Encoding Customization
+@section \e$B%(%s%3!<%G%#%s%0$N%+%9%?%^%$%:\e(B
@table @code
-
@item mm-body-charset-encoding-alist
@vindex mm-body-charset-encoding-alist
-Mapping from @acronym{MIME} charset to encoding to use. This variable is
-usually used except, e.g., when other requirements force a specific
-encoding (digitally signed messages require 7bit encodings). The
-default is
+@acronym{MIME} \e$BJ8;z%;%C%H$K3d$jEv$F$k%(%s%3!<%G%#%s%0$G$9!#$3$NJQ?t$O!"\e(B
+\e$BNc$($PB>$NMW7o$K$h$C$FFCDj$N%(%s%3!<%G%#%s%0$,6/@)$5$l$J$$$H$-$K!"DL>o;H\e(B
+\e$B$o$l$^$9\e(B (\e$BEE;R=pL>$5$l$?%a%C%;!<%8$O\e(B 7bit \e$B%(%s%3!<%G%#%s%0$rI,MW$H$7$^$9\e(B)\e$B!#\e(B
+\e$B%G%#%U%)%k%HCM$O<!$NDL$j$G$9!#\e(B
@lisp
((iso-2022-jp . 7bit)
(utf-16le . base64))
@end lisp
-As an example, if you do not want to have ISO-8859-1 characters
-quoted-printable encoded, you may add @code{(iso-8859-1 . 8bit)} to
-this variable. You can override this setting on a per-message basis
-by using the @code{encoding} @acronym{MML} tag (@pxref{MML Definition}).
+\e$BNc$($P\e(B ISO-8859-1 \e$BJ8;z%;%C%H$,\e(B quoted-printable \e$B$G%(%s%3!<%I$5$l$J$$$h$&\e(B
+\e$B$K$7$?$$>l9g$O!"$3$NJQ?t$K\e(B @code{(iso-8859-1 . 8bit)} \e$B$rDI2C$9$l$PNI$$$G\e(B
+\e$B$7$g$&!#\e(B@acronym{MML} \e$B$N\e(B @code{encoding} \e$B%?%0$r;H$C$F!"%a%C%;!<%8Kh$K$=\e(B
+\e$B$l$G;XDj$7$?CM$r$3$NJQ?t$h$jM%@h$5$;$k$3$H$b$G$-$^\e(B
+\e$B$9\e(B (@pxref{MML Definition})\e$B!#\e(B
@item mm-coding-system-priorities
@vindex mm-coding-system-priorities
-Prioritize coding systems to use for outgoing messages. The default
-is @code{nil}, which means to use the defaults in Emacs. It is a list of
-coding system symbols (aliases of coding systems are also allowed, use
-@kbd{M-x describe-coding-system} to make sure you are specifying correct
-coding system names). For example, if you have configured Emacs
-to prefer UTF-8, but wish that outgoing messages should be sent in
-ISO-8859-1 if possible, you can set this variable to
-@code{(iso-8859-1)}. You can override this setting on a per-message
-basis by using the @code{charset} @acronym{MML} tag (@pxref{MML Definition}).
+\e$BAw=P$9$k%a%C%;!<%8$G;H$&\e(B coding system \e$B$NM%@hEY$r;XDj$7$^$9!#%G%#%U%)%k\e(B
+\e$B%HCM$O\e(B @code{nil} \e$B$G$9\e(B (\e$B$=$N>l9g$O\e(B Emacs \e$B$K$*$1$k%G%#%U%)%k%H$NM%@h=g0L\e(B
+\e$B$,E,MQ$5$l$^$9\e(B) \e$B$,!"F|K\8l4D6-$G\e(B Emacs \e$B$r<B9T$9$k>l9g\e(B
+\e$B$O\e(B @code{(iso-8859-1 iso-2022-jp iso-2022-jp-2 shift_jis utf-8)} \e$B$K$J$j\e(B
+\e$B$^$9!#CM$O\e(B coding system \e$B$N%7%s%\%k$N%j%9%H$G$9\e(B (coding system \e$B$NJLL>$r\e(B
+\e$B;H$C$F$b9=$$$^$;$s!#@_Dj$9$k$H$-$O\e(B @kbd{M-x describe-coding-system} \e$B$r;H$C\e(B
+\e$B$F!"\e(Bcoding system \e$B$NL>A0$,@53N$G$"$k$3$H$r3N$+$a$F$/$@$5$$\e(B)\e$B!#Nc$(\e(B
+\e$B$P\e(B UTF-8 \e$B$r:GM%@h$H$9$k$h$&$K\e(B Emacs \e$B$r@_Dj$7$?$b$N$N!"2DG=$J>l9g\e(B
+\e$B$O\e(B ISO-8859-1 \e$B$G%a%C%;!<%8$rAw?.$9$k$h$&$K$7$?$$$H$$$&>l9g$@$C$?$i!"$3\e(B
+\e$B$NJQ?t$r\e(B @code{(iso-8859-1)} \e$B$K$9$l$PNI$$$G$7$g$&!#\e(B
+@acronym{MML} \e$B$N\e(B @code{charset} \e$B%?%0$r;H$C$F!"%a%C%;!<%8Kh$K$=$l$G;XDj$7\e(B
+\e$B$?CM$r$3$NJQ?t$h$jM%@h$5$;$k$3$H$b$G$-$^$9\e(B (@pxref{MML Definition})\e$B!#\e(B
+
+@quotation
+\e$BLuCm\e(B: \e$BF|K\8l4D6-$H$O\e(B @code{current-language-environment} \e$BJQ?t$NCM\e(B
+\e$B$,\e(B @samp{Japanese} \e$B$K$J$C$F$$$k4D6-$N$3$H$G$9!#F|K\8l$N%a%C%;!<%8$N%(%s\e(B
+\e$B%3!<%I$K$OEAE}E*$K\e(B @code{iso-2022-jp} \e$B$,;H$o$l$F$$$k$N$KBP$7!"\e(BEmacs \e$B$GDj\e(B
+\e$B$a$i$l$?M%@h=g0L$K4p$E$/$H\e(B @code{euc-jp} \e$B$d\e(B @code{shift_jis} \e$B$J$I$,Bh0l\e(B
+\e$B8uJd$K$J$C$F$7$^$&$N$G!"$3$NCM$,\e(B @code{nil} \e$B$G$O$h$m$7$/$J$$$N$G$9!#\e(B
+
+\e$B$J$*!"%i%F%s8l7w$N?M$?$A$K08$F$FAw$k%a%C%;!<%8$,!"H`$i$,%G%3!<%I$G$-$J$$\e(B
+\e$B$+$b$7$l$J$$\e(B @code{iso-2022-jp-2} \e$B$J$I$G%(%s%3!<%I$5$l$F$7$^$&$N$rKI$0$?\e(B
+\e$B$a$K!"%G%#%U%)%k%HCM$N@hF,$K\e(B @code{iso-8859-1} \e$B$,CV$+$l$F$$$^$9!#\e(B
+@end quotation
+
+\e$B%K%e!<%9%0%k!<%W3,AX$4$H$KM%@h$9$k$Y$-J8;z%;%C%H$,0[$J$k$N$G!"\e(BGnus \e$B$G\e(B
+\e$B$O\e(B @code{mm-coding-system-priorities} \e$B$NCM$r3,AX$K$h$C$F@Z$jBX$($kI,MW$,\e(B
+\e$B$"$k$G$7$g$&!#$=$N$?$a$NNc$G$9\e(B:
+
+@c \e$BM%@h$5$l$k$Y$-J8;z%;%C%H$ND{@5$r4?7^$7$^$9!#\e(Bde\e$B!"\e(Bfr \e$B$*$h$S\e(B fj \e$B$O@5$7$$\e(B
+@c \e$B$O$:$G$9$,!"$=$l$i0J30$K$D$$$F$OIT3N$+$G$9\e(B (\e$B$7$?$,$C$F!"$=$l$i$OC1$J\e(B
+@c \e$B$kNc$G$9\e(B):
+@lisp
+(add-to-list 'gnus-newsgroup-variables 'mm-coding-system-priorities)
+(setq gnus-parameters
+ (nconc
+ ;; Some charsets are just examples!
+ '(("^cn\\." ;; Chinese
+ (mm-coding-system-priorities
+ '(iso-8859-1 cn-big5 chinese-iso-7bit utf-8)))
+ ("^cz\\.\\|^pl\\." ;; Central and Eastern European
+ (mm-coding-system-priorities '(iso-8859-2 utf-8)))
+ ("^de\\." ;; German language
+ (mm-coding-system-priorities '(iso-8859-1 iso-8859-15 utf-8)))
+ ("^fr\\." ;; French
+ (mm-coding-system-priorities '(iso-8859-15 iso-8859-1 utf-8)))
+ ("^fj\\." ;; Japanese
+ (mm-coding-system-priorities
+ '(iso-8859-1 iso-2022-jp iso-2022-jp-2 shift_jis utf-8)))
+ ("^ru\\." ;; Cyrillic
+ (mm-coding-system-priorities
+ '(koi8-r iso-8859-5 iso-8859-1 utf-8))))
+ gnus-parameters))
+@end lisp
@item mm-content-transfer-encoding-defaults
@vindex mm-content-transfer-encoding-defaults
-Mapping from @acronym{MIME} types to encoding to use. This variable is usually
-used except, e.g., when other requirements force a safer encoding
-(digitally signed messages require 7bit encoding). Besides the normal
-@acronym{MIME} encodings, @code{qp-or-base64} may be used to indicate that for
-each case the most efficient of quoted-printable and base64 should be
-used.
-
-@code{qp-or-base64} has another effect. It will fold long lines so that
-MIME parts may not be broken by MTA. So do @code{quoted-printable} and
-@code{base64}.
-
-Note that it affects body encoding only when a part is a raw forwarded
-message (which will be made by @code{gnus-summary-mail-forward} with the
-arg 2 for example) or is neither the @samp{text/*} type nor the
-@samp{message/*} type. Even though in those cases, you can override
-this setting on a per-message basis by using the @code{encoding}
-@acronym{MML} tag (@pxref{MML Definition}).
+@acronym{MIME} \e$B$N%?%$%W$K3d$jEv$F$k%(%s%3!<%G%#%s%0$G$9!#$3$NJQ?t$O!"Nc\e(B
+\e$B$($PB>$NMW7o$K$h$C$F$h$j0BA4$J%(%s%3!<%G%#%s%0$,6/@)$5$l$J$$$H$-$K!"DL>o\e(B
+\e$B;H$o$l$^$9\e(B (\e$BEE;R=pL>$5$l$?%a%C%;!<%8$O\e(B 7bit \e$B%(%s%3!<%G%#%s%0$rI,MW$H$7$^\e(B
+\e$B$9\e(B)\e$B!#DL>o$N\e(B @acronym{MIME} \e$B%(%s%3!<%G%#%s%0$NB>$K!"\e(B
+quoted-printable \e$B$H\e(B base64 \e$B$N$&$A$G:G$b8zN(E*$JJ}$r8D!9$N>l9g$K;H$&$Y$-\e(B
+\e$B$G$"$k$3$H$r<($9\e(B @code{qp-or-base64} \e$B$r;H$&$3$H$b$G$-$^$9\e(B (\e$BLu\e(B
+\e$BCm\e(B: @code{qp-or-base64} \e$B$N<B:]$NF0:n$O!"\e(Bquoted-printable \e$B$H\e(B base64 \e$B$NN>\e(B
+\e$BJ}$G%(%s%3!<%I$7$F$_$F!"%5%$%:$,>.$5$/$J$kJ}$r:NMQ$9$k$3$H$G$9\e(B)\e$B!#\e(B
+
+@code{qp-or-base64} \e$B$K$O$b$&0l$D$N8z2L$,$"$j$^$9!#$=$l\e(B
+\e$B$O\e(B @acronym{MIME} \e$B$N%Q!<%H$,\e(B MTA \e$B$K$h$C$F2u$5$l$J$$$h$&$K$9$k$?$a$K!"D9\e(B
+\e$B$$9T$r@^$j>v$_$^$9!#\e(B@code{quoted-printable} \e$B$H\e(B @code{base64} \e$B$b$=$&$G$9!#\e(B
+
+\e$B%Q!<%H$,<u?.$7$?$H$-$N$^$^$N@8$NE>Aw$5$l$?%a%C%;!<%8\e(B (\e$BNc$($P!"0z?t\e(B
+\e$B$K\e(B 2 \e$B$rM?$($?\e(B @code{gnus-summary-mail-forward} \e$B$K$h$C$F:n$i$l$k$b$N\e(B) \e$B$G\e(B
+\e$B$"$k$+!"\e(B@samp{text/*} \e$B%?%$%W$d\e(B @samp{message/*} \e$B$G$O$J$$>l9g$K!"$3$l$,K\\e(B
+\e$BJ8$N%(%s%3!<%G%#%0$K1F6A$r5Z$\$9$3$H$KCm0U$7$F$/$@$5$$!#$=$l$i$N>l9g$G$5\e(B
+\e$B$(!"\e(B@acronym{MML} \e$B$N\e(B @code{encoding} \e$B%?%0$r;H$C$F!"%a%C%;!<%8Kh$K$=\e(B
+\e$B$l$G;XDj$7$?CM$r$3$NJQ?t$h$jM%@h$5$;$k$3$H$b$G$-$^\e(B
+\e$B$9\e(B (@pxref{MML Definition})\e$B!#\e(B
@item mm-use-ultra-safe-encoding
@vindex mm-use-ultra-safe-encoding
-When this is non-@code{nil}, it means that textual parts are encoded as
-quoted-printable if they contain lines longer than 76 characters or
-starting with "From " in the body. Non-7bit encodings (8bit, binary)
-are generally disallowed. This reduce the probability that a non-8bit
-clean MTA or MDA changes the message. This should never be set
-directly, but bound by other functions when necessary (e.g., when
-encoding messages that are to be digitally signed).
-
+\e$B$3$l$,Hs\e(B-@code{nil} \e$B$G$"$k>l9g!"K\J8$K\e(B 76 \e$BJ8;z$h$j$bD9$$9T$d\e(B "From " \e$B$G\e(B
+\e$B;O$^$k9T$,$"$C$?$i!"$=$l$i$N%F%-%9%H$N%Q!<%H$O\e(B quoted-printable \e$B$G%(%s%3!<\e(B
+\e$B%I$5$l$^$9!#Hs\e(B-7bit \e$B%(%s%3!<%G%#%s%0\e(B (8bit, \e$B%P%$%J%j!<\e(B) \e$B$O0lHL$KG'$a$i$l\e(B
+\e$B$F$$$^$;$s!#$3$NJQ?t$r\e(B @code{nil} \e$B0J30$NCM$K@_Dj$7$F$*$/$3$H$O!"\e(B8bit \e$B$r\e(B
+\e$BDL$5$J$$\e(B MTA \e$B$+\e(B MDA \e$B$,%a%C%;!<%8$r2~JQ$7$F$7$^$&3NN($r2<$2$^$9!#$3$l$OD>\e(B
+\e$B@\$K@_Dj$5$l$k$N$G$O$J$/!"B>$N4X?t$K$h$C$F\e(B (\e$BNc$($P!"EE;R=pL>$5$l$k%a%C%;!<\e(B
+\e$B%8$r%(%s%3!<%I$9$k$H$-$K\e(B) \e$BI,MW$K1~$8$FB+G{$5$l$k$Y$-$G$9!#\e(B
@end table
@node Charset Translation
-@section Charset Translation
+@section \e$BJ8;z%;%C%H$NJQ49\e(B
@cindex charsets
-During translation from @acronym{MML} to @acronym{MIME}, for each
-@acronym{MIME} part which has been composed inside Emacs, an appropriate
-charset has to be chosen.
+@acronym{MML} \e$B$r\e(B @acronym{MIME} \e$B$KJQ49$9$k$H$-$K!"\e(BEmacs \e$B$NFbIt$G:n$i$l\e(B
+\e$B$?\e(B @acronym{MIME} \e$B%Q!<%H$N$=$l$>$l$K$D$$$F!"E,@Z$JJ8;z%;%C%H$rA*$P$J$1$l\e(B
+\e$B$P$J$j$^$;$s!#\e(B
@vindex mail-parse-charset
-If you are running a non-@sc{mule} Emacs, this process is simple: If the
-part contains any non-@acronym{ASCII} (8-bit) characters, the @acronym{MIME} charset
-given by @code{mail-parse-charset} (a symbol) is used. (Never set this
-variable directly, though. If you want to change the default charset,
-please consult the documentation of the package which you use to process
-@acronym{MIME} messages.
-@xref{Various Message Variables, , Various Message Variables, message,
- Message Manual}, for example.)
-If there are only @acronym{ASCII} characters, the @acronym{MIME} charset US-ASCII is
-used, of course.
+@sc{mule} \e$B5!G=$,L5$$\e(B Emacs \e$B$rAv$i$;$F$$$k>l9g$@$C$?$i!"$3$N=hM}$OC1=c$G\e(B
+\e$B$9!#%Q!<%H$,$I$s$JHs\e(B-@acronym{ASCII} (8-bit) \e$BJ8;z$r4^$s$G$$$F$b!"\e(B
+@code{mail-parse-charset} \e$B$GM?$($i$l$k\e(B @acronym{MIME} \e$BJ8;z%;%C%H\e(B (\e$B%7%s%\\e(B
+\e$B%k\e(B) \e$B$r;H$($PNI$$$N$G$9!#\e(B(\e$B$b$C$H$b!"$3$NJQ?t$rD>@\$K@_Dj$7$J$$$G$/$@$5$$!#\e(B
+\e$B%G%#%U%)%k%H$NJ8;z%;%C%H$rJQ99$7$?$$>l9g$O!"\e(B@acronym{MIME} \e$B%a%C%;!<%8$r\e(B
+\e$B=hM}$9$k$?$a$K;H$&%Q%C%1!<%8$N@bL@=q$rD4$Y$F$/$@$5$$!#Nc$($P\e(B:
+@pxref{Various Message Variables, ,\e$B$$$m$$$m$J%a%C%;!<%8JQ?t\e(B, message-ja,
+The Message Manual})\e$B!#\e(B@acronym{ASCII} \e$BJ8;z%;%C%H$7$+L5$1$l$P!"\e(B
+US-ASCII \e$B$,\e(B @acronym{MIME} \e$BJ8;z%;%C%H$H$7$F;H$o$l$k$N$O$b$A$m$s$G$9!#\e(B
@cindex MULE
@cindex UTF-8
@cindex Unicode
@vindex mm-mime-mule-charset-alist
-Things are slightly more complicated when running Emacs with @sc{mule}
-support. In this case, a list of the @sc{mule} charsets used in the
-part is obtained, and the @sc{mule} charsets are translated to @acronym{MIME}
-charsets by consulting the variable @code{mm-mime-mule-charset-alist}.
-If this results in a single @acronym{MIME} charset, this is used to encode
-the part. But if the resulting list of @acronym{MIME} charsets contains more
-than one element, two things can happen: If it is possible to encode the
-part via UTF-8, this charset is used. (For this, Emacs must support
-the @code{utf-8} coding system, and the part must consist entirely of
-characters which have Unicode counterparts.) If UTF-8 is not available
-for some reason, the part is split into several ones, so that each one
-can be encoded with a single @acronym{MIME} charset. The part can only be
-split at line boundaries, though---if more than one @acronym{MIME} charset is
-required to encode a single line, it is not possible to encode the part.
-
-When running Emacs with @sc{mule} support, the preferences for which
-coding system to use is inherited from Emacs itself. This means that
-if Emacs is set up to prefer UTF-8, it will be used when encoding
-messages. You can modify this by altering the
-@code{mm-coding-system-priorities} variable though (@pxref{Encoding
-Customization}).
-
-The charset to be used can be overridden by setting the @code{charset}
-@acronym{MML} tag (@pxref{MML Definition}) when composing the message.
-
-The encoding of characters (quoted-printable, 8bit etc) is orthogonal
-to the discussion here, and is controlled by the variables
-@code{mm-body-charset-encoding-alist} and
-@code{mm-content-transfer-encoding-defaults} (@pxref{Encoding
-Customization}).
+@sc{mule} \e$B5!G=$rHw$($?\e(B Emacs \e$B$rAv$i$;$F$$$k>l9g$O!"$b$N$4$H$OB?>/J#;($K\e(B
+\e$B$J$j$^$9!#$3$N>l9g$O!"%Q!<%H$G;H$o$l$F$$$k\e(B @sc{mule} \e$BJ8;z%;%C%H$N%j%9%H\e(B
+\e$B$r<hF@$7!"\e(BEmacs \e$B<+?H$,Ds6!$9$k%F!<%V%k$+!"\e(BXEmacs \e$B$N$?$a\e(B
+\e$B$N\e(B @code{mm-mime-mule-charset-alist} \e$BJQ?t$NCM$K4p$E$$$F!"$=$l$i\e(B
+\e$B$N\e(B @sc{mule} \e$BJ8;z%;%C%H$r\e(B @acronym{MIME} \e$BJ8;z%;%C%H$KJQ49$7$^$9!#7k2L$,\e(B
+\e$BC10l$N\e(B @acronym{MIME} \e$BJ8;z%;%C%H$@$C$?$i!"$=$l$r;H$C$F%Q!<%H$r%(%s%3!<%I\e(B
+\e$B$7$^$9!#$7$+$7!"7k2L$N\e(B @acronym{MIME} \e$BJ8;z%;%C%H$N%j%9%H$,Fs$D0J>e$NMWAG\e(B
+\e$B$r4^$s$G$$$k>l9g$K$O!"Fs$D$N$3$H$,5/$3$jF@$^$9!#$b$7%Q!<%H$r\e(B UTF-8 \e$B$G%(\e(B
+\e$B%s%3!<%I$9$k$3$H$,2DG=$@$C$?$i!"$=$NJ8;z%;%C%H$r;H$$$^$9!#\e(B(\e$B$3$N$?$a\e(B
+\e$B$K\e(B Emacs \e$B$O\e(B @code{utf-8} coding system \e$B$r%5%]!<%H$7$F$$$J$1$l$P$J$j$^$;\e(B
+\e$B$s!#$^$?!"$=$N%Q!<%H$r9=@.$9$k$9$Y$F$NJ8;z$KBP1~$9$k$b$N$,!"\e(BUnicode \e$B$NDj\e(B
+\e$B5A$KB8:_$7$F$$$J$1$l$P$J$j$^$;$s!#\e(B) \e$B2?$i$+$NM}M3$K$h$C$F\e(B UTF-8 \e$B$rMxMQ$G\e(B
+\e$B$-$J$$>l9g!"$=$N%Q!<%H$O!"$=$l$>$l$,C10l$N\e(B @acronym{MIME} \e$BJ8;z%;%C%H$G%(\e(B
+\e$B%s%3!<%I$9$k$3$H$,$G$-$k$h$&$K!"$$$/$D$+$KJ,3d$5$l$^$9!#$b$C$H$b!"%Q!<%H\e(B
+\e$B$O9T$N6-3&$G$7$+J,3d$9$k$3$H$,$G$-$J$$$N$G!"C10l$N9T$r%(%s%3!<%I$9$k$?$a\e(B
+\e$B$KJ#?t$N\e(B @acronym{MIME} \e$BJ8;z%;%C%H$,I,MW$@$H$9$k$H!"$=$N%Q!<%H$r%(%s%3!<\e(B
+\e$B%I$9$k$3$H$OIT2DG=$G$9!#\e(B
+
+@sc{mule} \e$B5!G=$rHw$($?\e(B Emacs \e$B$rAv$i$;$F$$$k>l9g!"$I$N\e(B coding system \e$B$r;H\e(B
+\e$B$&$+$NM%@h=g0L$O\e(B Emacs \e$B<+?H$+$i7Q>5$5$l$^$9!#$3$l$O!"$b\e(B
+\e$B$7\e(B Emacs \e$B$,\e(B UTF-8 \e$B$rM%@h$9$k$h$&$K@_Dj$5$l$F$$$k$H!"$=$l$,%a%C%;!<%8$N%(\e(B
+\e$B%s%3!<%I$K;H$o$l$k$H$$$&$3$H$G$9!#$?$@\e(B
+\e$B$7\e(B @code{mm-coding-system-priorities} \e$BJQ?t$NCM$rJQ$($k$3$H$K$h$C$F!"$3$l\e(B
+\e$B$rJQ99$9$k$3$H$O$G$-$^$9\e(B (@pxref{Encoding Customization})\e$B!#\e(B
+
+\e$B%a%C%;!<%8$r:n@.$9$k$H$-$K\e(B @acronym{MML} \e$B$N\e(B @code{charset} \e$B%?%0$r@_Dj$9\e(B
+\e$B$k$3$H$K$h$C$F!";H$o$l$kJ8;z%;%C%H$r$=$l$K$9$k$3$H$,$G$-$^$9!#\e(B
+
+\e$BJ8;zNs$N%(%s%3!<%G%#%s%0\e(B (quoted-printable, 8bit \e$B$J$I\e(B) \e$B$O$3$3$G$N5DO@$H\e(B
+\e$BD>8r$9$k35G0$G$9!#$=$l$O\e(B @code{mm-body-charset-encoding-alist} \e$BJQ?t\e(B
+\e$B$H\e(B @code{mm-content-transfer-encoding-defaults} \e$BJQ?t$K$h$C$F@)8f$5$l$^\e(B
+\e$B$9\e(B (@pxref{Encoding Customization})\e$B!#\e(B
@node Conversion
-@section Conversion
+@section \e$BJQ49\e(B
@findex mime-to-mml
-A (multipart) @acronym{MIME} message can be converted to @acronym{MML}
-with the @code{mime-to-mml} function. It works on the message in the
-current buffer, and substitutes @acronym{MML} markup for @acronym{MIME}
-boundaries. Non-textual parts do not have their contents in the buffer,
-but instead have the contents in separate buffers that are referred to
-from the @acronym{MML} tags.
+@code{mime-to-mml} \e$B4X?t$r;H$C$F\e(B @acronym{MIME} \e$B%a%C%;!<%8\e(B (\e$B%^%k%A%Q!<%H\e(B
+\e$B$G$b2D\e(B) \e$B$r\e(B @acronym{MML} \e$B$KJQ49$9$k$3$H$,$G$-$^$9!#$3$l$O8=:_$N%P%C%U%!!<\e(B
+\e$B$K$"$k\e(B @acronym{MIME} \e$B%a%C%;!<%8$K:nMQ$7$F!"\e(B@acronym{MIME} \e$B$N6-3&\e(B
+\e$B$r\e(B @acronym{MML} \e$B$N0uIU$1\e(B (markup) \e$B$GCV$-49$($^$9!#%F%-%9%H$G$O$J$$%Q!<\e(B
+\e$B%H$NFbMFJ*$O!"$=$N%P%C%U%!!<$KCV$+$l$kBe$o$j$K\e(B @acronym{MML} \e$B%?%0$r2p$7\e(B
+\e$B$F;2>H$5$l$kJL$N%P%C%U%!!<$KCV$+$l$^$9!#\e(B
@findex mml-to-mime
-An @acronym{MML} message can be converted back to @acronym{MIME} by the
-@code{mml-to-mime} function.
-
-These functions are in certain senses ``lossy''---you will not get back
-an identical message if you run @code{mime-to-mml} and then
-@code{mml-to-mime}. Not only will trivial things like the order of the
-headers differ, but the contents of the headers may also be different.
-For instance, the original message may use base64 encoding on text,
-while @code{mml-to-mime} may decide to use quoted-printable encoding, and
-so on.
+@code{mml-to-mime} \e$B4X?t$r;H$C$F!"5U$K\e(B @acronym{MML} \e$B%a%C%;!<%8\e(B
+\e$B$r\e(B @acronym{MIME} \e$B$KJQ49$9$k$3$H$,$G$-$^$9!#\e(B
-In essence, however, these two functions should be the inverse of each
-other. The resulting contents of the message should remain equivalent,
-if not identical.
+\e$B$3$l$i$N4X?t$,9T$J$&$3$H$O$"$k0UL#$G!VIT2D5U!W\e(B(lossy) \e$B$G$9!#\e(B
+@code{mime-to-mml} \e$B$r<B9T$7!"<!$K\e(B @code{mml-to-mime} \e$B$r<B9T$9$k$H!"85$H\e(B
+\e$B$^$C$?$/F1$8%a%C%;!<%8$K$OLa$i$J$$$G$7$g$&!#%X%C%@!<$N=g=x$N$h$&$J$I$&$G\e(B
+\e$B$bNI$$$3$H$,0c$C$F$7$^$&$@$1$G$J$/!"$=$l$>$l$N%X%C%@!<$NFbMF$bJQ2=$7$F$7\e(B
+\e$B$^$&$+$b$7$l$^$;$s!#Nc$($P!"85$N%a%C%;!<%8$,\e(B base64 \e$B$G%F%-%9%H$r%(%s%3!<\e(B
+\e$B%I$7$F$"$C$F$b!"\e(B@code{mml-to-mime} \e$B$O\e(B quoted-printable \e$B$r;H$&$+$b$7$l$J\e(B
+\e$B$$!"$H$$$&$h$&$J$3$H$G$9!#\e(B
+
\e$B$7$+$7K\<AE*$K$O!"$3$l$iFs$D$O8_$$$K5U4X?t$G$"$k$Y$-$G$9!#7k2L$H$7$F@8@.
\e(B
+\e$B$5$l$k%a%C%;!<%8$NFbMFJ*$,!"F10l$G$J$$$K$7$F$bEy2A$J$^$^$G$"$k$h$&$J!#\e(B
@node Flowed text
-@section Flowed text
+@section \e$BN.F0%F%-%9%H\e(B
@cindex format=flowed
-The Emacs @acronym{MIME} library will respect the @code{use-hard-newlines}
-variable (@pxref{Hard and Soft Newlines, ,Hard and Soft Newlines,
-emacs, Emacs Manual}) when encoding a message, and the
-``format=flowed'' Content-Type parameter when decoding a message.
-
-On encoding text, regardless of @code{use-hard-newlines}, lines
-terminated by soft newline characters are filled together and wrapped
-after the column decided by @code{fill-flowed-encode-column}.
-Quotation marks (matching @samp{^>* ?}) are respected. The variable
-controls how the text will look in a client that does not support
-flowed text, the default is to wrap after 66 characters. If hard
-newline characters are not present in the buffer, no flow encoding
-occurs.
-
-On decoding flowed text, lines with soft newline characters are filled
-together and wrapped after the column decided by
-@code{fill-flowed-display-column}. The default is to wrap after
-@code{fill-column}.
+Emacs @acronym{MIME} \e$B%i%$%V%i%j!<$O!"%a%C%;!<%8$r%(%s%3!<%I$9$k$H$-\e(B
+\e$B$O\e(B @code{use-hard-newlines} \e$BJQ?t\e(B (@pxref{Hard and Soft Newlines, ,Hard
+and Soft Newlines, emacs, Emacs Manual}) \e$B$K=>$$!"%a%C%;!<%8$r%G%3!<%I$9\e(B
+\e$B$k$H$-$O\e(B Content-Type \e$B%Q%i%a!<%?!<$N!H\e(Bformat=flowed\e$B!I$rB:=E$7$^$9!#\e(B
+
+\e$B%F%-%9%H$r%(%s%3!<%I$9$k$H$-!"%=%U%H2~9TJ8;z$G=*C<$5$l$F$$$k3F9T\e(B
+\e$B$O!"\e(B@code{use-hard-newlines} \e$B$K4X$o$i$:\e(B
+\e$B$K\e(B @code{fill-flowed-encode-column} \e$B$G7hDj$5$l$k7e$N8e$m$G@^$j>v$^$l$F!"\e(B
+\e$B<*$rB7$($i$l\e(B (filled \e$B$5$l\e(B) \e$B$^$9!#0zMQ$N0u\e(B (@samp{^>* ?}) \e$B$OB:=E$5$l$^$9!#\e(B
+\e$B$=$NJQ?t$O!"N.F0%F%-%9%H$r%5%]!<%H$7$J$$%/%i%$%"%s%H$K$*$1$k%F%-%9%H$N8+\e(B
+\e$B$(J}$r@)8f$7!"%G%#%U%)%k%H$G$O\e(B 66\e$BJ8;z$N8e$m$G@^$j>v$_$^$9!#%P%C%U%!!<$K\e(B
+\e$B%O!<%I2~9TJ8;z$,L5$1$l$P!"N.F0\e(B (flowed) \e$B%F%-%9%H$N$?$a$N%(%s%3!<%I$O9T$J\e(B
+\e$B$$$^$;$s!#\e(B
+
+\e$B%P%C%U%!!<$K2~9TJ8;z$,$"$k$H$-!"N.F0%F%-%9%H$K%(%s%3!<%I$9$k$3$H$rM-8z$^\e(B
+\e$B$?$OL58z$K$9$k$?$a$K\e(B @code{mml-enable-flowed} \e$BJQ?t$r%+%9%?%^%$%:$G$-$^$9!#\e(B
+
+\e$BN.F0\e(B (flowed) \e$B%F%-%9%H$r%G%3!<%I$9$k$H$-!"%=%U%H2~9TJ8;z$r;}$D3F9T\e(B
+\e$B$O\e(B @code{fill-flowed-display-column} \e$B$G7hDj$5$l$k7e$N8e$m$G@^$j>v$^$l$F\e(B
+\e$B<*$rB7$($i$l\e(B (filled \e$B$5$l\e(B) \e$B$^$9!#%G%#%U%)%k%H$G$O\e(B @code{fill-column} \e$B$N\e(B
+\e$B8e$m$G@^$j>v$_$^$9!#\e(B
@table @code
@item mm-fill-flowed
@vindex mm-fill-flowed
-If non-@code{nil} a format=flowed article will be displayed flowed.
+\e$BHs\e(B-@code{nil} \e$B$@$C$?$i!"\e(Bformat=flowed \e$B$N5-;v$ON.F0E*$KI=<($5$l$^$9!#\e(B
@end table
-
@node Interface Functions
-@chapter Interface Functions
+@chapter \e$B%$%s%?!<%U%'!<%94X?t\e(B
@cindex interface functions
@cindex mail-parse
-The @code{mail-parse} library is an abstraction over the actual
-low-level libraries that are described in the next chapter.
-
-Standards change, and so programs have to change to fit in the new
-mold. For instance, RFC2045 describes a syntax for the
-@code{Content-Type} header that only allows @acronym{ASCII} characters in the
-parameter list. RFC2231 expands on RFC2045 syntax to provide a scheme
-for continuation headers and non-@acronym{ASCII} characters.
-
-The traditional way to deal with this is just to update the library
-functions to parse the new syntax. However, this is sometimes the wrong
-thing to do. In some instances it may be vital to be able to understand
-both the old syntax as well as the new syntax, and if there is only one
-library, one must choose between the old version of the library and the
-new version of the library.
-
-The Emacs @acronym{MIME} library takes a different tack. It defines a
-series of low-level libraries (@file{rfc2047.el}, @file{rfc2231.el}
-and so on) that parses strictly according to the corresponding
-standard. However, normal programs would not use the functions
-provided by these libraries directly, but instead use the functions
-provided by the @code{mail-parse} library. The functions in this
-library are just aliases to the corresponding functions in the latest
-low-level libraries. Using this scheme, programs get a consistent
-interface they can use, and library developers are free to create
-write code that handles new standards.
-
-The following functions are defined by this library:
+@code{mail-parse} \e$B%i%$%V%i%j!<$O!"<!$N>O$G=R$Y$k<B:]$NDc%l%Y%k$J%i%$%V%i\e(B
+\e$B%j!<$rCj>]2=$7$?$b$N$G$9!#\e(B
+
+\e$BI8=`$OJQ2=$9$k$N$G!"%W%m%0%i%`$b?7$7$$Cr7?$KE,9g$9$k$?$a$KJQ2=$7$J$1$l$P\e(B
+\e$B$J$j$^$;$s!#Nc$($P\e(B RFC2045 \e$B$O!"%Q%i%a!<%?!<$N%j%9%H$K$*$$\e(B
+\e$B$F\e(B @acronym{ASCII} \e$BJ8;z$@$1$r5vMF$9$k\e(B @code{Content-Type} \e$B%X%C%@!<$N$?$a\e(B
+\e$B$N9=J8$K$D$$$F=R$Y$F$$$^$9!#\e(BRFC2231 \e$B$O!"J#?t9T$KEO$C$F7QB3$9$kC10l$N%X%C\e(B
+\e$B%@!<$HHs\e(B-@acronym{ASCII} \e$BJ8;z$N9=@.$r5,Dj$9$k$?$a$N\e(B RFC2045 \e$B$N9=J8$K$D$$\e(B
+\e$B$F>\$7$/5-=R$7$F$$$^$9!#\e(B
+
+\e$B$3$l$KBP=h$9$k=>Mh$NJ}K!$O!"C1$K?7$7$$9=J8$r2r@O$9$k$?$a$K%i%$%V%i%j!<$N\e(B
+\e$B4X?t$r99?7$9$k$3$H$G$7$?!#$7$+$7$J$,$i!"$3$l$O;~$K$O8m$C$?9T0Y$G$9!#>l9g\e(B
+\e$B$K$h$C$F$O!"?7$7$$9=J8$H8E$$9=J8$NN>J}$rM}2r$G$-$k$h$&$K$9$k$3$H$,=EMW$+\e(B
+\e$B$b$7$l$J$$$7!"%i%$%V%i%j!<$,0l$D$7$+L5$$>l9g$K$O!"%i%$%V%i%j!<$N8E$$%P!<\e(B
+\e$B%8%g%s$H?7$7$$%P!<%8%g%s$N$I$A$i$+$rA*$P$J$1$l$P$J$j$^$;$s!#\e(B
+
+Emacs @acronym{MIME} \e$B%i%$%V%i%j!<$O0[$J$kJ}?K$G9T$/$3$H$K$7$^$7$?!#$3$l\e(B
+\e$B$O!"BP1~$9$kI8=`$K=>$C$F87L)$K2r@O$9$k0lO"$NDc%l%Y%k$N%i%$%V%i\e(B
+\e$B%j!<\e(B (@file{rfc2047.el}, @file{rfc2231.el} \e$B$J$I\e(B) \e$B$rDj5A$7$^$9!#$H$O8@$(!"\e(B
+\e$B@55,$N%W%m%0%i%`$O!"$3$l$i$N%i%$%V%i%j!<$,D>@\$KDs6!$9$k4X?t$G$O$J$/!"Be\e(B
+\e$B$o$j$K\e(B @code{mail-parse} \e$B%i%$%V%i%j!<$,Ds6!$9$k4X?t$r;H$&$Y$-$G$9!#$3$N\e(B
+\e$B%i%$%V%i%j!<$K$"$k4X?t$O!":G?7$NDc%l%Y%k$N%i%$%V%i%j!<$N!"BP1~$9$k4X?t$X\e(B
+\e$B$NC1$J$kJLL>$G$9!#$3$N9=@.$r;H$&$3$H$K$h$C$F!"%W%m%0%i%`$O$=$l$i$,;H$&$3\e(B
+\e$B$H$,$G$-$k<sHx0l4S$7$?%$%s%?!<%U%'!<%9$r<j$KF~$l$^$7$?!#$^$?!"%i%$%V%i%j!<\e(B
+\e$B$N3+H/<T$O!"?7$7$$I8=`$r07$&%3!<%I$r<+M3$K:n@.$9$k$3$H$,$G$-$^$9!#\e(B
+
+\e$B0J2<$N4X?t$,!"$3$N%i%$%V%i%j!<$GDj5A$5$l$F$$$^$9\e(B:
@table @code
@item mail-header-parse-content-type
@findex mail-header-parse-content-type
-Parse a @code{Content-Type} header and return a list on the following
-format:
+@code{Content-Type} \e$B%X%C%@!<$r2r@O$7$F!"0J2<$N7A<0$G%j%9%H$rJV$7$^$9\e(B:
@lisp
("type/subtype"
...)
@end lisp
-Here's an example:
+\e$BNc$G$9\e(B:
@example
(mail-header-parse-content-type
@item mail-header-parse-content-disposition
@findex mail-header-parse-content-disposition
-Parse a @code{Content-Disposition} header and return a list on the same
-format as the function above.
+@code{Content-Disposition} \e$B%X%C%@!<$r2r@O$7$F!">e5-$N4X?t$HF1$87A<0$N%j\e(B
+\e$B%9%H$rJV$7$^$9!#\e(B
@item mail-content-type-get
@findex mail-content-type-get
-Takes two parameters---a list on the format above, and an attribute.
-Returns the value of the attribute.
+\e$B>e5-$N7A<0$N%j%9%H$HB0@-$NFs$D$N%Q%i%a!<%?!<$r<u$1<h$j!"$=$NB0@-$NCM$rJV\e(B
+\e$B$7$^$9!#\e(B
@example
(mail-content-type-get
@item mail-header-encode-parameter
@findex mail-header-encode-parameter
-Takes a parameter string and returns an encoded version of the string.
-This is used for parameters in headers like @code{Content-Type} and
-@code{Content-Disposition}.
+\e$B%Q%i%a!<%?!<$K;H$&J8;zNs$r<u$1<h$j!"$=$l$r%(%s%3!<%I$7$?$b$N$rJV$7$^$9!#\e(B
+\e$B$3$l$O\e(B @code{Content-Type} \e$B$H\e(B @code{Content-Disposition} \e$B$N$h$&$J%X%C%@!<\e(B
+\e$B$KF~$l$k%Q%i%a!<%?!<$N$?$a$K;H$o$l$^$9!#\e(B
@item mail-header-remove-comments
@findex mail-header-remove-comments
-Return a comment-free version of a header.
+\e$B%X%C%@!<$+$i%3%a%s%H$r<h$j=|$$$?$b$N$rJV$7$^$9!#\e(B
@example
(mail-header-remove-comments
@item mail-header-remove-whitespace
@findex mail-header-remove-whitespace
-Remove linear white space from a header. Space inside quoted strings
-and comments is preserved.
+\e$B%X%C%@!<$+$i!H\e(Blinear white space\e$B!I$r<h$j=|$-$^$9!#%/%)!<%H$5$l\e(B
+\e$B$?\e(B ("..." \e$B$G0O$^$l$?\e(B) \e$BJ8;zNs$NCf$K$"$k6uGrJ8;z$H%3%a%s%H$OJ]B8$5$l$^$9!#\e(B
+
+\e$BLuCm\e(B:\e$B!H\e(Blinear white space\e$B!I$H$O0l$D0J>e$N6uGrJ8;z$N$3$H$G!"$=$NA0$K2~9T\e(B
+\e$BJ8;z$rCV$$$?$b$N$O!"D9$$%X%C%@!<$r@^$j>v$`$H$-$K;H$o$l$^$9!#\e(B
@example
(mail-header-remove-whitespace
@item mail-header-get-comment
@findex mail-header-get-comment
-Return the last comment in a header.
+\e$B%X%C%@!<$N:G8e$N%3%a%s%H$rJV$7$^$9!#\e(B
@example
(mail-header-get-comment
@result{} "Finnish Landrace"
@end example
+\e$BLuCm\e(B: @samp{Finnish Landrace} \e$B$O\e(B 1998\e$BG/\e(B8\e$B7n\e(B23\e$BF|$K%j%j!<%9$5$l$?\e(B XEmacs
+21.0-pre11 \e$B$N%3!<%I%M!<%`$G$9!#$^$"!"$I$&$G$b$$$$$3$H$G$9$,!#\e(B
+
@item mail-header-parse-address
@findex mail-header-parse-address
-Parse an address and return a list containing the mailbox and the
-plaintext name.
+\e$B%"%I%l%9$r2r@O$7$F!"%a!<%k%"%I%l%9$H%W%l!<%s%F%-%9%H$NL>A0$r4^$`%j%9%H$r\e(B
+\e$BJV$7$^$9!#\e(B
@example
(mail-header-parse-address
@item mail-header-parse-addresses
@findex mail-header-parse-addresses
-Parse a string with list of addresses and return a list of elements like
-the one described above.
+\e$B%"%I%l%9$N%j%9%H$r4^$s$G$$$kJ8;zNs$r2r@O$7$F!">e$G=R$Y$?$h$&$JMWAG$N%j%9\e(B
+\e$B%H$rJV$7$^$9!#\e(B
@example
(mail-header-parse-addresses
@item mail-header-parse-date
@findex mail-header-parse-date
-Parse a date string and return an Emacs time structure.
+\e$BF|IU$NJ8;zNs$r2r@O$7$F!"\e(BEmacs \e$B7A<0$N;~9o$rJV$7$^$9!#\e(B
@item mail-narrow-to-head
@findex mail-narrow-to-head
-Narrow the buffer to the header section of the buffer. Point is placed
-at the beginning of the narrowed buffer.
+\e$B%P%C%U%!!<$r%X%C%@!<$N6h0h$K69$a$^$9!#%]%$%s%H$O69$a$i$l$?%P%C%U%!!<$N@h\e(B
+\e$BF,$KCV$+$l$^$9!#\e(B
@item mail-header-narrow-to-field
@findex mail-header-narrow-to-field
-Narrow the buffer to the header under point. Understands continuation
-headers.
+\e$B%P%C%U%!!<$r8=:_0LCV$N\e(B (\e$BC10l$N\e(B) \e$B%X%C%@!<$K69$a$^$9!#J#?t9T$KEO$C$F7QB3$9\e(B
+\e$B$k%X%C%@!<$rM}2r$7$^$9!#\e(B
@item mail-header-fold-field
@findex mail-header-fold-field
-Fold the header under point.
+\e$B8=:_0LCV$N%X%C%@!<$r@^$j>v$_$^$9!#\e(B
@item mail-header-unfold-field
@findex mail-header-unfold-field
-Unfold the header under point.
+\e$B8=:_0LCV$N%X%C%@!<$N@^$j>v$_$r2r=|$7$^$9!#\e(B
@item mail-header-field-value
@findex mail-header-field-value
-Return the value of the field under point.
+\e$B8=:_0LCV$N%U%#!<%k%I$NCM$rJV$7$^$9!#\e(B
@item mail-encode-encoded-word-region
@findex mail-encode-encoded-word-region
-Encode the non-@acronym{ASCII} words in the region. For instance,
-@samp{Na@"{@dotless{i}}ve} is encoded as @samp{=?iso-8859-1?q?Na=EFve?=}.
+\e$BNN0h$K$"$k\e(B @acronym{ASCII} \e$B0J30$N8l$r%(%s%3!<%I$7$^$9!#Nc$(\e(B
+\e$B$P\e(B @samp{Na\e,Ao\e(Bve} \e$B$O\e(B @samp{=?iso-8859-1?Q?Na=EFve?=} \e$B$H$7$F%(%s%3!<%I$5$l\e(B
+\e$B$^$9!#\e(B
@item mail-encode-encoded-word-buffer
@findex mail-encode-encoded-word-buffer
-Encode the non-@acronym{ASCII} words in the current buffer. This function is
-meant to be called narrowed to the headers of a message.
+\e$B8=:_$N%P%C%U%!!<$K$"$k\e(B @acronym{ASCII} \e$B0J30$N8l$r%(%s%3!<%I$7$^$9!#$3$N\e(B
+\e$B4X?t$O!"%X%C%@!<$N6h0h$K69$a$i$l$?%a%C%;!<%8$G8F$P$l$k$3$H$r0U?^$7$F$$$^\e(B
+\e$B$9!#\e(B
@item mail-encode-encoded-word-string
@findex mail-encode-encoded-word-string
-Encode the words that need encoding in a string, and return the result.
+\e$BJ8;zNs$K4^$^$l$F$$$k%(%s%3!<%I$9$kI,MW$,$"$k8l$r%(%s%3!<%I$7$F!"7k2L$rJV\e(B
+\e$B$7$^$9!#\e(B
@example
(mail-encode-encoded-word-string
- "This is na@"{@dotless{i}}ve, baby")
-@result{} "This is =?iso-8859-1?q?na=EFve,?= baby"
+ "This is na\e,Ao\e(Bve, baby")
+@result{} "This is =?iso-8859-1?Q?na=EFve,?= baby"
@end example
@item mail-decode-encoded-word-region
@findex mail-decode-encoded-word-region
-Decode the encoded words in the region.
+\e$BNN0h$K$"$k%(%s%3!<%I$5$l$?8l$r%G%3!<%I$7$^$9!#\e(B
@item mail-decode-encoded-word-string
@findex mail-decode-encoded-word-string
-Decode the encoded words in the string and return the result.
+\e$BJ8;zNs$K4^$^$l$F$$$k%(%s%3!<%I$5$l$?8l$r%G%3!<%I$7$F!"7k2L$rJV$7$^$9!#\e(B
@example
(mail-decode-encoded-word-string
- "This is =?iso-8859-1?q?na=EFve,?= baby")
-@result{} "This is na@"{@dotless{i}}ve, baby"
+ "This is =?iso-8859-1?Q?na=EFve,?= baby")
+@result{} "This is na\e,Ao\e(Bve, baby"
@end example
-
@end table
-Currently, @code{mail-parse} is an abstraction over @code{ietf-drums},
-@code{rfc2047}, @code{rfc2045} and @code{rfc2231}. These are documented
-in the subsequent sections.
-
-
+\e$B8=:_\e(B @code{mail-parse} \e$B$O\e(B @code{ietf-drums}, @code{rfc2047},
+@code{rfc2045} \e$B$*$h$S\e(B @code{rfc2231} \e$B$rLVMe$7$FCj>]2=$7$^$9!#$3$l$i$K$D\e(B
+\e$B$$$F!"<!0J9_$N>O$G@bL@$7$^$9!#\e(B
@node Basic Functions
-@chapter Basic Functions
+@chapter \e$B4pK\E*$J4X?t\e(B
-This chapter describes the basic, ground-level functions for parsing and
-handling. Covered here is parsing @code{From} lines, removing comments
-from header lines, decoding encoded words, parsing date headers and so
-on. High-level functionality is dealt with in the next chapter
-(@pxref{Decoding and Viewing}).
+\e$B$3$N>O$O!"2<0L$N3,AX$K0LCV$7$F$$$F!"2r@O$H=hM}$r9T$J$&$?$a$N4pK\E*$J4X?t\e(B
+\e$B$K$D$$$F@bL@$7$^$9!#$3$3$G07$&$3$H$O\e(B @code{From} \e$B9T$N2r@O!"%X%C%@!<$N3F\e(B
+\e$B9T$K$"$k%3%a%s%H$N:o=|!"%(%s%3!<%I$5$l$?8l$N%G%3!<%I!";~9o%X%C%@!<$N2r@O\e(B
+\e$B$J$I$G$9!#>e0L3,AX$N5!G=$O:G=i$N>O\e(B (@pxref{Decoding and Viewing}) \e$B$G07$o\e(B
+\e$B$l$F$$$^$9!#\e(B
@menu
-* rfc2045:: Encoding @code{Content-Type} headers.
-* rfc2231:: Parsing @code{Content-Type} headers.
-* ietf-drums:: Handling mail headers defined by RFC822bis.
-* rfc2047:: En/decoding encoded words in headers.
-* time-date:: Functions for parsing dates and manipulating time.
-* qp:: Quoted-Printable en/decoding.
-* base64:: Base64 en/decoding.
-* binhex:: Binhex decoding.
-* uudecode:: Uuencode decoding.
-* yenc:: Yenc decoding.
-* rfc1843:: Decoding HZ-encoded text.
-* mailcap:: How parts are displayed is specified by the @file{.mailcap} file
+* rfc2045:: @code{Content-Type} \e$B%X%C%@!<$N%(%s%3!<%I\e(B
+* rfc2231:: @code{Content-Type} \e$B%X%C%@!<$N2r@O\e(B
+* ietf-drums:: RFC822bis \e$B$GDj5A$5$l$F$$$k%a!<%k%X%C%@!<$N=hM}\e(B
+* rfc2047:: \e$B%X%C%@!<$K$"$k8l$N%(%s%3!<%I$H%G%3!<%I\e(B
+* time-date:: \e$BF|IU$N2r@O$H;~9o$rA`:n$9$k4X?t\e(B
+* qp:: Quoted-Printable \e$B$N%(%s%3!<%I$H%G%3!<%I\e(B
+* base64:: Base64 \e$B$N%(%s%3!<%I$H%G%3!<%I\e(B
+* binhex:: Binhex \e$B$N%G%3!<%I\e(B
+* uudecode:: Uuencode \e$B$N%G%3!<%I\e(B
+* yenc:: Yenc \e$B$N%G%3!<%I\e(B
+* rfc1843:: HZ-\e$B%(%s%3!<%I$5$l$?%F%-%9%H$N%G%3!<%I\e(B
+* mailcap:: \e$B%Q!<%H$NI=<($N;EJ}$O\e(B @file{.mailcap} \e$B%U%!%$%k$KL@5-$5$l$F$$$k\e(B
@end menu
+\e$BLuCm\e(B: RFC822bis == draft-ietf-drums-msg-fmt-09.txt
@node rfc2045
@section rfc2045
-RFC2045 is the ``main'' @acronym{MIME} document, and as such, one would
-imagine that there would be a lot to implement. But there isn't, since
-most of the implementation details are delegated to the subsequent
-RFCs.
+RFC2045 \e$B$O!V<gMW$J!W\e(B@acronym{MIME} \e$B$NJ88%$G$9!#$J$i$P!"$=$3$K$O$?$/$5$s\e(B
+\e$B$N<BAu$,$"$k$@$m$&$HA[A|$9$k$G$7$g$&!#$7$+$7!"$[$H$s$I$N>\:Y$J<BAu$O$=$N\e(B
+\e$B8e$N\e(B RFC \e$B$K0Q$M$i$l$F$$$F!"$=$3$K$O$"$j$^$;$s!#\e(B
-So @file{rfc2045.el} has only a single function:
+\e$B$H8@$&$o$1$G\e(B @file{rfc2045.el} \e$B$K$O$?$C$?0l$D$N4X?t$,$"$j$^$9\e(B:
@table @code
@item rfc2045-encode-string
@findex rfc2045-encode-string
-Takes a parameter and a value and returns a @samp{PARAM=VALUE} string.
-@var{value} will be quoted if there are non-safe characters in it.
+\e$B%Q%i%a!<%?!<$HCM$r<u$1<h$j!"\e(B@samp{PARAM=VALUE} \e$B$N7A<0$NJ8;zNs$rJV$7$^$9!#\e(B
+@var{value} \e$B$K0BA4$G$O$J$$J8;z$,$"$C$?$i%/%)!<%H$5$l\e(B ("..." \e$B$G0O$^$l\e(B) \e$B$^\e(B
+\e$B$9!#\e(B
@end table
-
@node rfc2231
@section rfc2231
-RFC2231 defines a syntax for the @code{Content-Type} and
-@code{Content-Disposition} headers. Its snappy name is @dfn{MIME
-Parameter Value and Encoded Word Extensions: Character Sets, Languages,
-and Continuations}.
+RFC2231 \e$B$O\e(B @code{Content-Type} \e$B$H\e(B @code{Content-Disposition} \e$B%X%C%@!<$N\e(B
+\e$B9=J8$rDj5A$7$^$9!#$=$N>.?h$JL>>N$O!V\e(B@acronym{MIME} \e$B%Q%i%a!<%?!<CM$HId9f\e(B
+\e$B2=C18l3HD%J8;z%;%C%H!&8@8l$=$7$F7QB3!W$G$9!#\e(B
-In short, these headers look something like this:
+\e$B0l8}$G8@$&$H!"$=$l$i$N%X%C%@!<$O$3$s$J$U$&$G$9\e(B:
@example
Content-Type: application/x-stuff;
title*2="isn't it!"
@end example
-They usually aren't this bad, though.
+\e$BIaDL$O$3$s$J$K$R$I$/$J$$$G$9$,!#\e(B
-The following functions are defined by this library:
+\e$B0J2<$N4X?t$,$3$N%i%$%V%i%j!<$GDj5A$5$l$F$$$^$9\e(B:
@table @code
@item rfc2231-parse-string
@findex rfc2231-parse-string
-Parse a @code{Content-Type} header and return a list describing its
-elements.
+@code{Content-Type} \e$B%X%C%@!<$r2r@O$7$F!"$=$NMWAG$rI=$9%j%9%H$rJV$7$^$9!#\e(B
@example
(rfc2231-parse-string
@item rfc2231-get-value
@findex rfc2231-get-value
-Takes one of the lists on the format above and returns
-the value of the specified attribute.
+\e$B>e5-$N7A<0$N%j%9%H$N0l$D$r<u$1<h$j!";XDj$5$l$?B0@-$NCM$rJV$7$^$9!#\e(B
@item rfc2231-encode-string
@findex rfc2231-encode-string
-Encode a parameter in headers likes @code{Content-Type} and
-@code{Content-Disposition}.
-
+@code{Content-Type} \e$B$H\e(B @code{Content-Disposition} \e$B$N$h$&$J%X%C%@!<$KF~$l\e(B
+\e$B$k%Q%i%a!<%?!<$r%(%s%3!<%I$7$^$9!#\e(B
@end table
-
@node ietf-drums
@section ietf-drums
-@dfn{drums} is an IETF working group that is working on the replacement
-for RFC822.
+@dfn{drums} \e$B$O\e(B RFC822 \e$B$NCV$-49$(:n6H$r$7$F$$$k\e(B IETF \e$B$N:n6HIt2q$G$9!#\e(B
-The functions provided by this library include:
+\e$B$3$N%i%$%V%i%j!<$K$h$C$FDs6!$5$l$k4X?t$O<!$NDL$j$G$9\e(B:
@table @code
@item ietf-drums-remove-comments
@findex ietf-drums-remove-comments
-Remove the comments from the argument and return the results.
+\e$B0z?t$+$i%3%a%s%H$r<h$j=|$$$F!"7k2L$rJV$7$^$9!#\e(B
@item ietf-drums-remove-whitespace
@findex ietf-drums-remove-whitespace
-Remove linear white space from the string and return the results.
-Spaces inside quoted strings and comments are left untouched.
+\e$BJ8;zNs$+$i!H\e(Blinear white space\e$B!I$r<h$j=|$-!"7k2L$rJV$7$^$9!#%/%)!<%H$5$l\e(B
+\e$B$?\e(B ("..." \e$B$G0O$^$l$?\e(B) \e$BJ8;zNs$NCf$K$"$k6uGrJ8;z$H%3%a%s%H$K$O<j$rIU$1$^$;\e(B
+\e$B$s!#\e(B
+
+\e$BLuCm\e(B:\e$B!H\e(Blinear white space\e$B!I$H$O0l$D0J>e$N6uGrJ8;z$N$3$H$G!"$=$NA0$K2~9T\e(B
+\e$BJ8;z$rCV$$$?$b$N$O!"D9$$%X%C%@!<$r@^$j>v$`$H$-$K;H$o$l$^$9!#\e(B
@item ietf-drums-get-comment
@findex ietf-drums-get-comment
-Return the last most comment from the string.
+\e$BJ8;zNs$N:G8eHx$K$"$k%3%a%s%H$rJV$7$^$9!#\e(B
@item ietf-drums-parse-address
@findex ietf-drums-parse-address
-Parse an address string and return a list that contains the mailbox and
-the plain text name.
+\e$B%"%I%l%9$NJ8;zNs$r2r@O$7$F!"%a!<%k%"%I%l%9$H%W%l!<%s%F%-%9%H$NL>A0$r4^$`\e(B
+\e$B%j%9%H$rJV$7$^$9!#\e(B
@item ietf-drums-parse-addresses
@findex ietf-drums-parse-addresses
-Parse a string that contains any number of comma-separated addresses and
-return a list that contains mailbox/plain text pairs.
+\e$B%+%s%^$G6h@Z$i$l$?J#?t$N%"%I%l%9$r4^$s$G$$$kJ8;zNs$r2r@O$7$F!"%a!<%k%"%I\e(B
+\e$B%l%9$H%W%l!<%s%F%-%9%H$NBP$r4^$`%j%9%H$rJV$7$^$9!#\e(B
@item ietf-drums-parse-date
@findex ietf-drums-parse-date
-Parse a date string and return an Emacs time structure.
+\e$BF|IU$NJ8;zNs$r2r@O$7$F!"\e(BEmacs \e$B7A<0$N;~9o$rJV$7$^$9!#\e(B
@item ietf-drums-narrow-to-header
@findex ietf-drums-narrow-to-header
-Narrow the buffer to the header section of the current buffer.
-
+\e$B8=:_$N%P%C%U%!!<$r%X%C%@!<$N6h0h$K69$a$^$9!#\e(B
@end table
-
@node rfc2047
@section rfc2047
-RFC2047 (Message Header Extensions for Non-@acronym{ASCII} Text) specifies how
-non-@acronym{ASCII} text in headers are to be encoded. This is actually rather
-complicated, so a number of variables are necessary to tweak what this
-library does.
+RFC2047 (\e$B%a%C%;!<%8!&%X%C%@!<$G$NHs\e(B-@acronym{ASCII} \e$B%F%-%9%H3HD%\e(B) \e$B$O!"%X%C\e(B
+\e$B%@!<$K$"$kHs\e(B-@acronym{ASCII} \e$B%F%-%9%H$r$I$N$h$&$K%(%s%3!<%I$9$k$+$rDj$a\e(B
+\e$B$F$$$^$9!#<B:]$3$l$O>/!9J#;($K$J$k$N$G!"$3$N%i%$%V%i%j!<$,9T$J$&$3$H$rD4\e(B
+\e$B@0$9$k$?$a$K!"B?$/$NJQ?t$,I,MW$G$9!#\e(B
-The following variables are tweakable:
+\e$B0J2<$NJQ?t$,D4@02DG=$G$9\e(B:
@table @code
@item rfc2047-header-encoding-alist
@vindex rfc2047-header-encoding-alist
-This is an alist of header / encoding-type pairs. Its main purpose is
-to prevent encoding of certain headers.
+\e$B$3$l$O%X%C%@!<$H%(%s%3!<%G%#%s%0!&%?%$%W$NBP$r<}$a$?O"A[%j%9%H$G$9!#$=$N\e(B
+\e$B<g$JL\E*$O!"$"$k<o$N%X%C%@!<$,%(%s%3!<%I$5$l$J$$$h$&$K$9$k$3$H$G$9!#\e(B
-The keys can either be header regexps, or @code{t}.
+\e$B80\e(B (\e$BLuCm\e(B: \e$B3FMWAG$N\e(B @code{car} \e$B9`\e(B) \e$B$O%X%C%@!<$K9gCW$9$k@55,I=8=\e(B
+\e$B$+\e(B @code{t} \e$B$N$I$A$i$+$G$9!#\e(B
-The values can be @code{nil}, in which case the header(s) in question
-won't be encoded, @code{mime}, which means that they will be encoded, or
-@code{address-mime}, which means the header(s) will be encoded carefully
-assuming they contain addresses.
+\e$BCM\e(B (\e$BLuCm\e(B: \e$B3FMWAG$N\e(B @code{cdr} \e$B9`\e(B) \e$B$O\e(B @code{nil} \e$B$K$9$k$3$H$,$G$-$F!"$=$N\e(B
+\e$B>l9g!"80$KAjEv$9$k%X%C%@!<$O%(%s%3!<%I$5$l$^$;$s!#\e(B@code{mime} \e$B$O$=$l$i$r\e(B
+\e$B%(%s%3!<%I$9$k$3$H$r0UL#$7$^$9$,!"\e(B@code{address-mime} \e$B$N>l9g$O%X%C%@!<$,\e(B
+\e$B%"%I%l%9$r4^$s$G$$$k$3$H$rA[Dj$7$FCm0U?<$/%(%s%3!<%I$7$^$9!#\e(B
@item rfc2047-charset-encoding-alist
@vindex rfc2047-charset-encoding-alist
-RFC2047 specifies two forms of encoding---@code{Q} (a
-Quoted-Printable-like encoding) and @code{B} (base64). This alist
-specifies which charset should use which encoding.
+RFC2047 \e$B$OFs$D$N%(%s%3!<%G%#%s%0$N7A<0$rDj$a$F$$$^$9!#0l$D$O\e(B @code{Q}
+(Quoted-Printable \e$B$N$h$&$J%(%s%3!<%G%#%s%0\e(B) \e$B$G!"$b$&0l$D$O\e(B @code{B}
+(base64) \e$B$G$9!#$3$NO"A[%j%9%H$O!"$"$kJ8;z%;%C%H$KBP$7$F$I$N%(%s%3!<%G%#\e(B
+\e$B%s%0$r;H$&$+$r5,Dj$7$^$9!#\e(B
@item rfc2047-encode-function-alist
@vindex rfc2047-encode-function-alist
-This is an alist of encoding / function pairs. The encodings are
-@code{Q}, @code{B} and @code{nil}.
+\e$B$3$l$O%(%s%3!<%G%#%s%0$H$=$l$r<B;\$9$k$?$a$N4X?t$NBP$r<}$a$?O"A[%j%9%H$G\e(B
+\e$B$9!#%(%s%3!<%G%#%s%0$H$O\e(B @code{Q}, @code{B} \e$B$*$h$S\e(B @code{nil} \e$B$N$3$H$G$9!#\e(B
@item rfc2047-encoded-word-regexp
@vindex rfc2047-encoded-word-regexp
-When decoding words, this library looks for matches to this regexp.
+\e$B%G%3!<%I$r9T$J$&$H$-!"$3$N%i%$%V%i%j!<$O$3$N@55,I=8=$K9gCW$9$k$b$N$rC5$7\e(B
+\e$B$^$9!#\e(B
+
+@item rfc2047-encoded-word-regexp-loose
+@vindex rfc2047-encoded-word-regexp-loose
+@code{rfc2047-encoded-word-regexp} \e$B$N\e(B Q \e$B%(%s%3!<%G%#%s%0$N$?$a$N@55,I=8=\e(B
+\e$B$r4KK}$K$7$?%P!<%8%g%s$G$9!#\e(B
@item rfc2047-encode-encoded-words
@vindex rfc2047-encode-encoded-words
-The boolean variable specifies whether encoded words
-(e.g. @samp{=?hello?=}) should be encoded again.
-
+\e$B%(%s%3!<%I:Q$_$N8l\e(B (\e$BNc$($P\e(B @samp{=?us-ascii?q?hello?=}) \e$B$r:FEY%(%s%3!<%I\e(B
+\e$B$9$k$+$I$&$+$r7h$a$k%V!<%kJQ?t$G$9!#\e(B
+@code{rfc2047-encoded-word-regexp} \e$B$,$=$N$h$&$J8l$rC5$9$?$a$K;H$o$l$^$9!#\e(B
+
+@item rfc2047-allow-irregular-q-encoded-words
+@vindex rfc2047-allow-irregular-q-encoded-words
+\e$B$$$$2C8:$K\e(B Q \e$B$G%(%s%3!<%I$5$l$?8l\e(B (\e$BNc$(\e(B
+\e$B$P\e(B @samp{=?us-ascii?q?hello??=}) \e$B$r%G%3!<%I$9$Y$-$+$I$&$+$r7h$a$k%V!<%k\e(B
+\e$BJQ?t$G$9!#$=$l$,\e(B @code{nil} \e$B0J30$NCM$J$i$P!"%(%s%3!<%I$5$l$?8l$rC5$9$?$a\e(B
+\e$B$K\e(B @code{rfc2047-encoded-word-regexp} \e$B$KBe$o$C\e(B
+\e$B$F\e(B @code{rfc2047-encoded-word-regexp-loose} \e$B$,;H$o$l$^$9!#\e(B
@end table
-Those were the variables, and these are this functions:
+\e$B0J>e$OJQ?t$G$7$?!#<!$O4X?t$G$9\e(B:
@table @code
@item rfc2047-narrow-to-field
@findex rfc2047-narrow-to-field
-Narrow the buffer to the header on the current line.
+\e$B%P%C%U%!!<$r8=:_$N9T$N%X%C%@!<$K69$a$^$9!#\e(B
@item rfc2047-encode-message-header
@findex rfc2047-encode-message-header
-Should be called narrowed to the header of a message. Encodes according
-to @code{rfc2047-header-encoding-alist}.
+\e$B%a%C%;!<%8$N%X%C%@!<$K69$a$i$l$?%P%C%U%!!<$G;H$o$J$1$l$P$J$j$^$;$s!#\e(B
+@code{rfc2047-header-encoding-alist} \e$B$K=>$C$F%(%s%3!<%I$r9T$J$$$^$9!#\e(B
@item rfc2047-encode-region
@findex rfc2047-encode-region
-Encodes all encodable words in the region specified.
+\e$B;XDj$5$l$?NN0h$K$"$k$9$Y$F$N%(%s%3!<%I2DG=$J8l$r%(%s%3!<%I$7$^$9!#\e(B
@item rfc2047-encode-string
@findex rfc2047-encode-string
-Encode a string and return the results.
+\e$BJ8;zNs$r%(%s%3!<%I$7$F7k2L$rJV$7$^$9!#\e(B
@item rfc2047-decode-region
@findex rfc2047-decode-region
-Decode the encoded words in the region.
+\e$BNN0h$K$"$k%(%s%3!<%I$5$l$?8l$r%G%3!<%I$7$^$9!#\e(B
@item rfc2047-decode-string
@findex rfc2047-decode-string
-Decode a string and return the results.
+\e$BJ8;zNs$r%G%3!<%I$7$F7k2L$rJV$7$^$9!#\e(B
@item rfc2047-encode-parameter
@findex rfc2047-encode-parameter
-Encode a parameter in the RFC2047-like style. This is a replacement for
-the @code{rfc2231-encode-string} function. @xref{rfc2231}.
-
-When attaching files as @acronym{MIME} parts, we should use the RFC2231
-encoding to specify the file names containing non-@acronym{ASCII}
-characters. However, many mail softwares don't support it in practice
-and recipients won't be able to extract files with correct names.
-Instead, the RFC2047-like encoding is acceptable generally. This
-function provides the very RFC2047-like encoding, resigning to such a
-regrettable trend. To use it, put the following line in your
-@file{~/.gnus.el} file:
-
-@lisp
-(defalias 'mail-header-encode-parameter 'rfc2047-encode-parameter)
-@end lisp
-
+\e$B%Q%i%a!<%?!<$r\e(B RFC2047 \e$B$U$&$NMM<0$G%(%s%3!<%I$7$^$9!#$3$l$O4X\e(B
+\e$B?t\e(B @code{rfc2231-encode-string} \e$B$NBeMQ$G$9!#$=$l$,I8=`$J$N$G$9$,!"B?$/$N\e(B
+\e$B%a%$%i!<$,%5%]!<%H$7$^$;$s!#\e(B@xref{rfc2231}.
@end table
-
@node time-date
@section time-date
-While not really a part of the @acronym{MIME} library, it is convenient to
-document this library here. It deals with parsing @code{Date} headers
-and manipulating time. (Not by using tesseracts, though, I'm sorry to
-say.)
+\e$BK\Ev$O\e(B @acronym{MIME} \e$B%i%$%V%i%j!<$N0lIt$G$O$"$j$^$;$s$,!"$3$3$G@bL@$9$k\e(B
+\e$B$3$H$OET9g$,NI$$$N$G$9!#$3$l$OF|IU%X%C%@!<$N2r@O$H;~9o$NA`:n$r07$$$^$9!#\e(B
+(\e$B$b$C$H$b;M<!85N)J}BN$O;H$$$^$;$s!#$4$a$s$J$5$$!#\e(B)
-These functions convert between five formats: A date string, an Emacs
-time structure, a decoded time list, a second number, and a day number.
+\e$B$3$l$i$N4X?t$O8^$D$N7A<0\e(B (\e$B;~9o$NJ8;zNs!"\e(BEmacs \e$B7A<0$N;~9o!"%G%3!<%I$5$l$?\e(B
+\e$B;~9o$N%j%9%H!"IC?t!"$*$h$SF|?t\e(B) \e$B$N4V$GJQ49$r9T$J$$$^$9!#\e(B
-Here's a bunch of time/date/second/day examples:
+\e$B;~9o\e(B/\e$BF|IU\e(B/\e$BIC?t\e(B/\e$BF|?t$NAj8_JQ49$NNc$G$9\e(B:
@example
(parse-time-string "Sat Sep 12 12:21:54 1998 +0200")
@result{} 4.146122685185185
@end example
-And finally, we have @code{safe-date-to-time}, which does the same as
-@code{date-to-time}, but returns a zero time if the date is
-syntactically malformed.
+\e$B$"$H!"\e(B@code{safe-date-to-time} \e$B$H$$$&$b$N$b$"$j$^$9!#$3$l\e(B
+\e$B$O\e(B @code{date-to-time} \e$B$HF1$8$3$H$r$7$^$9$,!"F|IU$,9=J8E*$KIT40A4$@$C$?\e(B
+\e$B>l9g$K%<%m;~9o$rJV$7$^$9!#\e(B
-The five data representations used are the following:
+\e$B8^$D$N%G!<%?$O0J2<$N$h$&$KI=8=$5$l$^$9\e(B:
@table @var
@item date
-An RFC822 (or similar) date string. For instance: @code{"Sat Sep 12
-12:21:54 1998 +0200"}.
+RFC822 (\e$B$^$?$ON`;w$N\e(B) \e$B7A<0$NF|IU$NJ8;zNs!#Nc\e(B: @code{"Sat Sep 12 12:21:54
+1998 +0200"}
@item time
-An internal Emacs time. For instance: @code{(13818 26466)}.
+Emacs \e$B$NFbIt7A<0$N;~9o!#Nc\e(B: @code{(13818 26466)}
@item seconds
-A floating point representation of the internal Emacs time. For
-instance: @code{905595714.0}.
+Emacs \e$B$NFbIt7A<0$N;~9o$rIbF0>.?t$GI=$7$?$b$N!#Nc\e(B: @code{905595714.0}
@item days
-An integer number representing the number of days since 00000101. For
-instance: @code{729644}.
+00000101 \e$B$r4pE@$H$9$k7P2aF|?t$r@0?t$GI=$7$?$b$N!#Nc\e(B: @code{729644}
+
+\e$BLuCm\e(B: 00000101 \e$B$,2?$r0UL#$9$k$N$+ITL@$G$9$,!"%=!<%9%3!<%I$K$h$l$P%0%l%4\e(B
+\e$B%j%*Nr!&5*85A0\e(B (BC \e$B$G$O$J$/\e(B BCE \e$B$NJ}$N\e(B) 0001\e$BG/\e(B12\e$B7n\e(B31\e$BF|$N$3$H$i$7$$$G$9!#\e(B
@item decoded time
-A list of decoded time. For instance: @code{(54 21 12 12 9 1998 6 t
-7200)}.
+\e$B%G%3!<%I$5$l$?;~9o$N%j%9%H!#Nc\e(B: @code{(54 21 12 12 9 1998 6 t 7200)}
@end table
-All the examples above represent the same moment.
+\e$B>e5-$N$9$Y$F$NNc$O!"F1$8;~$rI=$7$F$$$^$9!#\e(B
-These are the functions available:
+\e$B4X?t$K$O0J2<$N$h$&$J$b$N$,$"$j$^$9\e(B:
@table @code
@item date-to-time
-Take a date and return a time.
+\e$BF|IU$r<u$1<h$C$F;~9o$rJV$7$^$9!#\e(B
@item time-to-seconds
-Take a time and return seconds.
+\e$B;~9o$r<u$1<h$C$FIC?t$rJV$7$^$9!#\e(BEmacs \e$B$K$O$=$l$r9T$J$&AH$_9~$_4X\e(B
+\e$B?t\e(B @code{float-time} \e$B$,$"$k$3$H$KCm0U$7$F$/$@$5$$!#\e(B
@item seconds-to-time
-Take seconds and return a time.
+\e$BIC?t$r<u$1<h$C$F;~9o$rJV$7$^$9!#\e(B
@item time-to-days
-Take a time and return days.
+\e$B;~9o$r<u$1<h$C$FF|?t$rJV$7$^$9!#\e(B
@item days-to-time
-Take days and return a time.
+\e$BF|?t$r<u$1<h$C$F;~9o$rJV$7$^$9!#\e(B
@item date-to-day
-Take a date and return days.
+\e$BF|IU$r<u$1<h$C$FF|?t$rJV$7$^$9!#\e(B
@item time-to-number-of-days
-Take a time and return the number of days that represents.
+\e$B;~9o$r<u$1<h$C$F!"$=$l$,I=$7$F$$$kF|?t$rJV$7$^$9!#\e(B
@item safe-date-to-time
-Take a date and return a time. If the date is not syntactically valid,
-return a ``zero'' date.
+\e$BF|IU$r<u$1<h$C$F;~9o$rJV$7$^$9!#F|IU$,9=J8E*$K@5$7$/$J$+$C$?$i!V%<%m!W;~\e(B
+\e$B9o$rJV$7$^$9!#\e(B
@item time-less-p
-Take two times and say whether the first time is less (i. e., earlier)
-than the second time.
+\e$BFs$D$N;~9o$r<u$1<h$C$F!"0l$DL\$,Fs$DL\$h$j>/$J$$\e(B (\e$B$9$J$o$AAa$$\e(B) \e$B$+$I$&$+\e(B
+\e$B$r<($7$^$9!#\e(B
@item time-since
-Take a time and return a time saying how long it was since that time.
+\e$B;~9o$r<u$1<h$C$F!"$=$N;~9o$+$i$I$l$[$I;~4V$,7P2a$7$?$+$r<($7$^$9!#\e(B
@item subtract-time
-Take two times and subtract the second from the first. I. e., return
-the time between the two times.
+\e$BFs$D$N;~9o$r<u$1<h$C$F!"0l$DL\$+$iFs$DL\$r8:;;$7$^$9!#$9$J$o$A!"Fs$D$N;~\e(B
+\e$B9o$N4V$N;~4V:9$rJV$7$^$9!#\e(B
@item days-between
-Take two days and return the number of days between those two days.
+\e$BFs$D$NF|IU$r<u$1<h$C$F!"$=$l$iFs$D$NF|IU$N4V$NF|?t$rJV$7$^$9!#\e(B
@item date-leap-year-p
-Take a year number and say whether it's a leap year.
+\e$BG/$N?tCM$r<u$1<h$C$F!"$=$l$,$&$k$&G/$+$I$&$+$r<($7$^$9!#\e(B
@item time-to-day-in-year
-Take a time and return the day number within the year that the time is
-in.
-
+\e$B;~9o$r<u$1<h$C$F!"$=$NG/$N85F|$+$i7P2a$7$?F|?t$rJV$7$^$9!#\e(B
@end table
-
@node qp
@section qp
-This library deals with decoding and encoding Quoted-Printable text.
+\e$B$3$N%i%$%V%i%j!<$O\e(B Quoted-Printable \e$B$K$h$k%F%-%9%H$N%G%3!<%I$H%(%s%3!<%I\e(B
+\e$B$r07$$$^$9!#\e(B
-Very briefly explained, qp encoding means translating all 8-bit
-characters (and lots of control characters) into things that look like
-@samp{=EF}; that is, an equal sign followed by the byte encoded as a hex
-string.
+\e$BHs>o$K<jC;$+$K@bL@$9$l$P!"\e(Bqp \e$B%(%s%3!<%G%#%s%0$O$9$Y$F$N\e(B 8-bit \e$BJ8;z\e(B (\e$B$HB?\e(B
+\e$B$/$N@)8fJ8;z\e(B) \e$B$r\e(B @samp{=EF} \e$B$N$h$&$J$b$N\e(B (\e$B%$%3!<%k5-9f$H!"$=$l$KB3\e(B
+\e$B$/\e(B 16\e$B?J?t$K%(%s%3!<%I$5$l$?%P%$%H\e(B) \e$B$KJQ49$9$k$3$H$G$9!#\e(B
-The following functions are defined by the library:
+\e$B$3$N%i%$%V%i%j!<$G$O!"0J2<$N4X?t$,Dj5A$5$l$F$$$^$9\e(B:
@table @code
@item quoted-printable-decode-region
@findex quoted-printable-decode-region
-QP-decode all the encoded text in the specified region.
+\e$B;XDj$5$l$?NN0h$K$"$k$9$Y$F$N%(%s%3!<%I$5$l$?%F%-%9%H$r\e(B QP-\e$B%G%3!<%I$7$^$9!#\e(B
@item quoted-printable-decode-string
@findex quoted-printable-decode-string
-Decode the QP-encoded text in a string and return the results.
+\e$BJ8;zNs$K4^$^$l$F$$$k\e(B QP-\e$B%(%s%3!<%I$5$l$?%F%-%9%H$r%G%3!<%I$7$F!"7k2L$rJV\e(B
+\e$B$7$^$9!#\e(B
@item quoted-printable-encode-region
@findex quoted-printable-encode-region
-QP-encode all the encodable characters in the specified region. The third
-optional parameter @var{fold} specifies whether to fold long lines.
-(Long here means 72.)
+\e$B;XDj$5$l$?NN0h$K$"$k$9$Y$F$N%(%s%3!<%I2DG=$JJ8;z$r\e(B QP-\e$B%(%s%3!<%I$7$^$9!#\e(B
+\e$B>JN,$G$-$kBh;00z?t\e(B @var{fold} \e$B$O!"D9$$9T$r@^$j>v$`$+$I$&$+$r;XDj$7$^$9!#\e(B
+(\e$B$3$3$G!VD9$$!W$O\e(B 72\e$B7e$r1[$($k$b$N$N$3$H$r0UL#$7$^$9!#\e(B)
@item quoted-printable-encode-string
@findex quoted-printable-encode-string
-QP-encode all the encodable characters in a string and return the
-results.
-
+\e$BJ8;zNs$K4^$^$l$F$$$k$9$Y$F$N%(%s%3!<%I2DG=$JJ8;z$r\e(B QP-\e$B%(%s%3!<%I$7$F!"7k\e(B
+\e$B2L$rJV$7$^$9!#\e(B
@end table
-
@node base64
@section base64
@cindex base64
-Base64 is an encoding that encodes three bytes into four characters,
-thereby increasing the size by about 33%. The alphabet used for
-encoding is very resistant to mangling during transit.
+Base64 \e$B$O\e(B 3-\e$B%P%$%H$r\e(B 4-\e$B%P%$%H$K%(%s%3!<%I$7$^$9!#$=$N$?$a!"Ls\e(B 33% \e$B%5%$%:\e(B
+\e$B$,A}$($^$9!#%"%k%U%!%Y%C%H$@$1$G%(%s%3!<%I$9$k$N$G!"EAAw$5$l$kESCf$G=P2q\e(B
+\e$B$&$+$b$7$l$J$$>c32$KBP$7$F$H$F$bBQ5WNO$,$"$j$^$9!#\e(B
-The following functions are defined by this library:
+\e$B0J2<$N4X?t$,$3$N%i%$%V%i%j!<$K$h$C$FDj5A$5$l$F$$$^$9\e(B:
@table @code
@item base64-encode-region
@findex base64-encode-region
-base64 encode the selected region. Return the length of the encoded
-text. Optional third argument @var{no-line-break} means do not break
-long lines into shorter lines.
+\e$BA*Br$5$l$?NN0h$r\e(B base64 \e$B$G%(%s%3!<%I$7$F!"%(%s%3!<%I$5$l$?%F%-%9%H$ND9$5\e(B
+\e$B$rJV$7$^$9!#>JN,$G$-$kBh;00z?t\e(B @var{no-line-break} \e$B$O!"D9$$9T$r$h$jC;$$\e(B
+\e$B9T$K@^$j>v$^$J$$$3$H$r;X?^$7$^$9!#\e(B
@item base64-encode-string
@findex base64-encode-string
-base64 encode a string and return the result.
+\e$BJ8;zNs$r\e(B base64 \e$B$G%(%s%3!<%I$7$F7k2L$rJV$7$^$9!#\e(B
@item base64-decode-region
@findex base64-decode-region
-base64 decode the selected region. Return the length of the decoded
-text. If the region can't be decoded, return @code{nil} and don't
-modify the buffer.
+\e$BA*Br$5$l$?NN0h$r\e(B base64 \e$B$G%G%3!<%I$7$F!"%G%3!<%I$5$l$?%F%-%9%H$ND9$5$rJV\e(B
+\e$B$7$^$9!#NN0h$,%G%3!<%I2DG=$G$J$+$C$?$i!"\e(B@code{nil} \e$B$rJV$9$@$1$G%P%C%U%!!<\e(B
+\e$B$OJQ99$7$^$;$s!#\e(B
@item base64-decode-string
@findex base64-decode-string
-base64 decode a string and return the result. If the string can't be
-decoded, @code{nil} is returned.
-
+\e$BJ8;zNs$r\e(B base64 \e$B$G%G%3!<%I$7$F7k2L$rJV$7$^$9!#J8;zNs$,%G%3!<%I2DG=$G$J$+$C\e(B
+\e$B$?$i\e(B @code{nil} \e$B$rJV$7$^$9!#\e(B
@end table
-
@node binhex
@section binhex
@cindex binhex
@cindex Apple
@cindex Macintosh
-@code{binhex} is an encoding that originated in Macintosh environments.
-The following function is supplied to deal with these:
+@code{binhex} \e$B$O%^%C%-%s%H%C%7%e$N4D6-$K8;$rH/$9$k%(%s%3!<%G%#%s%0$G$9!#\e(B
+\e$B0J2<$N4X?t$,$=$l$i$r07$&$?$a$K6!5k$5$l$F$$$^$9\e(B:
@table @code
@item binhex-decode-region
@findex binhex-decode-region
-Decode the encoded text in the region. If given a third parameter, only
-decode the @code{binhex} header and return the filename.
-
+\e$BNN0h$K$"$k%(%s%3!<%I$5$l$?%F%-%9%H$r%G%3!<%I$7$^$9!#Bh;0%Q%i%a!<%?!<$,M?\e(B
+\e$B$($i$l$k$H!"\e(B@code{binhex} \e$B$N%X%C%@!<$r%G%3!<%I$7$F%U%!%$%kL>$rJV$9$3$H$@\e(B
+\e$B$1$r$7$^$9!#\e(B
@end table
@node uudecode
@cindex uuencode
@cindex uudecode
-@code{uuencode} is probably still the most popular encoding of binaries
-used on Usenet, although @code{base64} rules the mail world.
+@code{base64} \e$B$,%a!<%k$N@$3&$r;YG[$7$F$$$k$b$N$N!"$*$=$i\e(B
+\e$B$/\e(B @code{uuencode} \e$B$O$^$@\e(B Usenet \e$B$G;H$o$l$F$$$k$b$N$NCf$G!":G$bIa5Z$7$F\e(B
+\e$B$$$k%P%$%J%j!<$N%(%s%3!<%G%#%s%0$G$9!#\e(B
-The following function is supplied by this package:
+\e$B0J2<$N4X?t$,$3$N%Q%C%1!<%8$K$h$C$F6!5k$5$l$F$$$^$9\e(B:
@table @code
@item uudecode-decode-region
@findex uudecode-decode-region
-Decode the text in the region.
+\e$BNN0h$K$"$k%F%-%9%H$r%G%3!<%I$7$^$9!#\e(B
@end table
-
@node yenc
@section yenc
@cindex yenc
-@code{yenc} is used for encoding binaries on Usenet. The following
-function is supplied by this package:
+@code{yenc} \e$B$O\e(B Usenet \e$B$G%P%$%J%j!<$r%(%s%3!<%I$9$k$?$a$K;H$o$l$^$9!#0J2<\e(B
+\e$B$N4X?t$,$3$N%Q%C%1!<%8$K$h$C$F6!5k$5$l$F$$$^$9\e(B:
@table @code
@item yenc-decode-region
@findex yenc-decode-region
-Decode the encoded text in the region.
-
+\e$BNN0h$K$"$k%(%s%3!<%I$5$l$?%F%-%9%H$r%G%3!<%I$7$^$9!#\e(B
@end table
-
@node rfc1843
@section rfc1843
@cindex rfc1843
@cindex HZ
@cindex Chinese
-RFC1843 deals with mixing Chinese and @acronym{ASCII} characters in messages. In
-essence, RFC1843 switches between @acronym{ASCII} and Chinese by doing this:
+RFC1843 \e$B$O%a%C%;!<%8$K$*$1$kCf9q8l$H\e(B @acronym{ASCII} \e$BJ8;z$N:.:_J8$r07$$\e(B
+
\e$B$^$9!#K\<AE*$K$O!"
\e(BRFC1843
\e$B$O0J2<$N$h$&$K
\e(B @acronym{ASCII}
\e$B$HCf9q8l$r@Z$j
\e(B
+\e$BBX$($k$b$N$G$9\e(B:
@example
This sentence is in @acronym{ASCII}.
The next sentence is in GB.~@{<:Ky2;S@{#,NpJ)l6HK!#~@}Bye.
@end example
-Simple enough, and widely used in China.
+\e$B$^$C$?$/C1=c$G!"Cf9q$G$O9-$/;H$o$l$F$$$^$9!#\e(B
-The following functions are available to handle this encoding:
+\e$B$3$N%(%s%3!<%G%#%s%0$r07$&$?$a$K!"0J2<$N4X?t$r;H$&$3$H$,$G$-$^$9\e(B:
@table @code
@item rfc1843-decode-region
-Decode HZ-encoded text in the region.
+\e$BNN0h$K$"$k\e(B HZ-\e$B%(%s%3!<%I$5$l$?%F%-%9%H$r%G%3!<%I$7$^$9!#\e(B
@item rfc1843-decode-string
-Decode a HZ-encoded string and return the result.
-
+HZ-\e$B%(%s%3!<%I$5$l$?J8;zNs$r%G%3!<%I$7$F7k2L$rJV$7$^$9!#\e(B
@end table
-
@node mailcap
@section mailcap
-The @file{~/.mailcap} file is parsed by most @acronym{MIME}-aware message
-handlers and describes how elements are supposed to be displayed.
-Here's an example file:
+@file{~/.mailcap} \e$B%U%!%$%k$O$[$H$s$I$N\e(B @acronym{MIME} \e$B$KBP1~$7$?%a%C%;!<\e(B
+\e$B%8!&%O%s%I%i!<$K$h$C$F2r@O$5$l$^$9!#$=$l$K$O!"3FMWAG$,$I$N$h$&$KI=<($5$l\e(B
+\e$B$k$b$N$HA[Dj$5$l$F$$$k$+$r5-=R$7$^$9!#%U%!%$%k$NNc$G$9\e(B:
@example
image/*; gimp -8 %s
application/msword; catdoc %s ; copiousoutput ; nametemplate=%s.doc
@end example
-This says that all image files should be displayed with @code{gimp},
-that WAVE audio files should be played by @code{wavplayer}, and that
-MS-WORD files should be inlined by @code{catdoc}.
+\e$B$3$l$O!"$9$Y$F$N2hA|%U%!%$%k$O\e(B @code{gimp} \e$B$GI=<($5$l$k$Y$-$G$"$k$3$H!"\e(B
+WAVE \e$B2;6A%U%!%$%k$O\e(B @code{wavplayer} \e$B$G:F@8$5$l$k$Y$-$G$"$k$3$H!"$=$7\e(B
+\e$B$F\e(B MS-WORD \e$B%U%!%$%k$O\e(B @code{catdoc} \e$B$K$h$C$F%$%s%i%$%sI=<($5$l$k$Y$-$G$"\e(B
+\e$B$k$H8@$C$F$$$^$9!#\e(B
-The @code{mailcap} library parses this file, and provides functions for
-matching types.
+@code{mailcap} \e$B%i%$%V%i%j!<$O$3$N%U%!%$%k$r2r@O$7$F!"9gCW$9$k%?%$%W$N$?\e(B
+\e$B$a$N4X?t$rDs6!$7$^$9!#\e(B
@table @code
@item mailcap-mime-data
@vindex mailcap-mime-data
-This variable is an alist of alists containing backup viewing rules.
-
+\e$B$3$NJQ?t$O!"%P%C%/%"%C%W$5$l$?\e(B (\e$BLuCm\e(B: mailcap \e$B%U%!%$%k$NFbMF$r2r@O$7\e(B
+\e$B$F\e(B Emacs \e$B$,07$$0W$$7A<0$K$7$?\e(B) \e$BI=<(5,B'$r4^$s$G$$$k!"O"A[%j%9%H$NO"A[%j\e(B
+\e$B%9%H$G$9!#\e(B
@end table
-Interface functions:
+\e$B%$%s%?!<%U%'!<%94X?t\e(B:
@table @code
@item mailcap-parse-mailcaps
@findex mailcap-parse-mailcaps
-Parse the @file{~/.mailcap} file.
+@file{~/.mailcap} \e$B%U%!%$%k$r2r@O$7$^$9!#\e(B
@item mailcap-mime-info
-Takes a @acronym{MIME} type as its argument and returns the matching viewer.
-
+\e$B0z?t$H$7$F\e(B @acronym{MIME} \e$B%?%$%W$r<u$1<h$j!"9gCW$9$k%S%e!<%o!<$rJV$7$^$9!#\e(B
@end table
-
-
-
@node Standards
-@chapter Standards
+@chapter \e$BI8=`\e(B
-The Emacs @acronym{MIME} library implements handling of various elements
-according to a (somewhat) large number of RFCs, drafts and standards
-documents. This chapter lists the relevant ones. They can all be
-fetched from @uref{http://quimby.gnus.org/notes/}.
+Emacs @acronym{MIME} \e$B%i%$%V%i%j!<$O!"\e(B(\e$B$d$d\e(B) \e$BB?$/$N\e(B RFC\e$B!"%I%i%U%H$*$h$SI8\e(B
+\e$B=`%I%-%e%a%s%H$K=>$C$F!"MM!9$JMWAG$r<h$j07$$$^$9!#$3$N>O$G$O4XO"$9$k$b$N\e(B
+\e$B$rNs5s$7$^$9!#$3$l$i$O$9$Y$F\e(B @uref{http://quimby.gnus.org/notes/} \e$B$+$i<h\e(B
+\e$BF@2DG=$G$9!#\e(B
@table @dfn
@item RFC822
@itemx STD11
-Standard for the Format of ARPA Internet Text Messages.
+ARPA \e$B%$%s%?!<%M%C%H%F%-%9%H%a%C%;!<%8$N=q<0$N$?$a$NI8=`!#\e(B
@item RFC1036
-Standard for Interchange of USENET Messages
+USENET \e$B%a%C%;!<%88r49$N$?$a$NI8=`!#\e(B
@item RFC2045
-Format of Internet Message Bodies
+\e$B%$%s%?!<%M%C%H%a%C%;!<%8$NK\J8$N=q<0!#\e(B
@item RFC2046
-Media Types
+\e$B%a%G%#%"%?%$%W!#\e(B
@item RFC2047
-Message Header Extensions for Non-@acronym{ASCII} Text
+\e$B%a%C%;!<%8%X%C%@!<$G$NHs\e(B-@acronym{ASCII} \e$B%F%-%9%H3HD%!#\e(B
@item RFC2048
-Registration Procedures
+\e$BEPO?<jB3!#\e(B
@item RFC2049
-Conformance Criteria and Examples
+\e$BE,9g4p=`$H;vNc!#\e(B
@item RFC2231
-@acronym{MIME} Parameter Value and Encoded Word Extensions: Character Sets,
-Languages, and Continuations
+@acronym{MIME} \e$B%Q%i%a!<%?!<CM$H%(%s%3!<%I$5$l$?C18l$N3HD%\e(B: \e$BJ8;z%;%C%H!"\e(B
+\e$B8@8l$*$h$S7QB3!#\e(B
@item RFC1843
-HZ - A Data Format for Exchanging Files of Arbitrarily Mixed Chinese and
-@acronym{ASCII} characters
+HZ - \e$BCf1Q:.:_J8$r4^$`%U%!%$%k8r49$N$?$a$N%G!<%?7A<0!#\e(B
@item draft-ietf-drums-msg-fmt-05.txt
-Draft for the successor of RFC822
+RFC822 \e$B$N8e7Q$N$?$a$NAp9F!#\e(B
@item RFC2112
-The @acronym{MIME} Multipart/Related Content-type
+@acronym{MIME} Multipart/Related Content-type\e$B!#\e(B
@item RFC1892
-The Multipart/Report Content Type for the Reporting of Mail System
-Administrative Messages
+\e$B%a!<%k%7%9%F%`$N4IM}%a%C%;!<%8$r%j%]!<%H$9$k$?$a$N\e(B Multipart/Report
+Content Type\e$B!#\e(B
@item RFC2183
-Communicating Presentation Information in Internet Messages: The
-Content-Disposition Header Field
+\e$B%$%s%?!<%M%C%H%a%C%;!<%8$N>pJsDL?.I=8=\e(B: Content-Disposition \e$B%X%C%@!<%U%#!<\e(B
+\e$B%k%I!#\e(B
@item RFC2646
-Documentation of the text/plain format parameter for flowed text.
-
+\e$BN.F0%F%-%9%H$N$?$a$N\e(B text/plain \e$B=q<0%Q%i%a!<%?!<!#\e(B
@end table
+@node GNU Free Documentation License
+@chapter GNU \e$B%U%j!<J8=qMxMQ5vBz7@Ls=q\e(B
+
+\e$BLuCm\e(B: @uref{http://www.opensource.jp/fdl/fdl.ja.html.euc-jp,
+\e$BHs8x<0$JF|K\8lLu\e(B} \e$B$,$"$j$^$9!#\e(B
+
+@include doclicense.texi
@node Index
@chapter Index
@printindex cp
-@summarycontents
-@contents
@bye
@c Local Variables:
projects / elisp / gnus-doc-ja.git / blobdiff